From 018de5aa899937a9dc3bc8cb9819cb218a59abf3 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Fri, 4 May 2018 14:04:31 -0400 Subject: Update bcachefs sources to ed4aea2ad4 bcachefs: fix gcc warning --- libbcachefs/journal_seq_blacklist.c | 358 ++++++++++++++++++++++++++++++++++++ 1 file changed, 358 insertions(+) create mode 100644 libbcachefs/journal_seq_blacklist.c (limited to 'libbcachefs/journal_seq_blacklist.c') diff --git a/libbcachefs/journal_seq_blacklist.c b/libbcachefs/journal_seq_blacklist.c new file mode 100644 index 00000000..b5301d96 --- /dev/null +++ b/libbcachefs/journal_seq_blacklist.c @@ -0,0 +1,358 @@ + +#include "bcachefs.h" +#include "btree_update.h" +#include "btree_update_interior.h" +#include "error.h" +#include "journal.h" +#include "journal_io.h" +#include "journal_reclaim.h" +#include "journal_seq_blacklist.h" + +/* + * journal_seq_blacklist machinery: + * + * To guarantee order of btree updates after a crash, we need to detect when a + * btree node entry (bset) is newer than the newest journal entry that was + * successfully written, and ignore it - effectively ignoring any btree updates + * that didn't make it into the journal. + * + * If we didn't do this, we might have two btree nodes, a and b, both with + * updates that weren't written to the journal yet: if b was updated after a, + * but b was flushed and not a - oops; on recovery we'll find that the updates + * to b happened, but not the updates to a that happened before it. + * + * Ignoring bsets that are newer than the newest journal entry is always safe, + * because everything they contain will also have been journalled - and must + * still be present in the journal on disk until a journal entry has been + * written _after_ that bset was written. + * + * To accomplish this, bsets record the newest journal sequence number they + * contain updates for; then, on startup, the btree code queries the journal + * code to ask "Is this sequence number newer than the newest journal entry? If + * so, ignore it." + * + * When this happens, we must blacklist that journal sequence number: the + * journal must not write any entries with that sequence number, and it must + * record that it was blacklisted so that a) on recovery we don't think we have + * missing journal entries and b) so that the btree code continues to ignore + * that bset, until that btree node is rewritten. + * + * Blacklisted journal sequence numbers are themselves recorded as entries in + * the journal. + */ + +/* + * Called when journal needs to evict a blacklist entry to reclaim space: find + * any btree nodes that refer to the blacklist journal sequence numbers, and + * rewrite them: + */ +static void journal_seq_blacklist_flush(struct journal *j, + struct journal_entry_pin *pin, u64 seq) +{ + struct bch_fs *c = + container_of(j, struct bch_fs, journal); + struct journal_seq_blacklist *bl = + container_of(pin, struct journal_seq_blacklist, pin); + struct blacklisted_node n; + struct closure cl; + unsigned i; + int ret; + + closure_init_stack(&cl); + + for (i = 0;; i++) { + struct btree_iter iter; + struct btree *b; + + mutex_lock(&j->blacklist_lock); + if (i >= bl->nr_entries) { + mutex_unlock(&j->blacklist_lock); + break; + } + n = bl->entries[i]; + mutex_unlock(&j->blacklist_lock); + + __bch2_btree_iter_init(&iter, c, n.btree_id, n.pos, 0, 0, 0); + + b = bch2_btree_iter_peek_node(&iter); + + /* The node might have already been rewritten: */ + + if (b->data->keys.seq == n.seq) { + ret = bch2_btree_node_rewrite(c, &iter, n.seq, 0); + if (ret) { + bch2_btree_iter_unlock(&iter); + bch2_fs_fatal_error(c, + "error %i rewriting btree node with blacklisted journal seq", + ret); + bch2_journal_halt(j); + return; + } + } + + bch2_btree_iter_unlock(&iter); + } + + for (i = 0;; i++) { + struct btree_update *as; + struct pending_btree_node_free *d; + + mutex_lock(&j->blacklist_lock); + if (i >= bl->nr_entries) { + mutex_unlock(&j->blacklist_lock); + break; + } + n = bl->entries[i]; + mutex_unlock(&j->blacklist_lock); +redo_wait: + mutex_lock(&c->btree_interior_update_lock); + + /* + * Is the node on the list of pending interior node updates - + * being freed? If so, wait for that to finish: + */ + for_each_pending_btree_node_free(c, as, d) + if (n.seq == d->seq && + n.btree_id == d->btree_id && + !d->level && + !bkey_cmp(n.pos, d->key.k.p)) { + closure_wait(&as->wait, &cl); + mutex_unlock(&c->btree_interior_update_lock); + closure_sync(&cl); + goto redo_wait; + } + + mutex_unlock(&c->btree_interior_update_lock); + } + + mutex_lock(&j->blacklist_lock); + + bch2_journal_pin_drop(j, &bl->pin); + list_del(&bl->list); + kfree(bl->entries); + kfree(bl); + + mutex_unlock(&j->blacklist_lock); +} + +/* + * Determine if a particular sequence number is blacklisted - if so, return + * blacklist entry: + */ +struct journal_seq_blacklist * +bch2_journal_seq_blacklist_find(struct journal *j, u64 seq) +{ + struct journal_seq_blacklist *bl; + + lockdep_assert_held(&j->blacklist_lock); + + list_for_each_entry(bl, &j->seq_blacklist, list) + if (seq >= bl->start && seq <= bl->end) + return bl; + + return NULL; +} + +/* + * Allocate a new, in memory blacklist entry: + */ +static struct journal_seq_blacklist * +bch2_journal_seq_blacklisted_new(struct journal *j, u64 start, u64 end) +{ + struct journal_seq_blacklist *bl; + + lockdep_assert_held(&j->blacklist_lock); + + /* + * When we start the journal, bch2_journal_start() will skip over @seq: + */ + + bl = kzalloc(sizeof(*bl), GFP_KERNEL); + if (!bl) + return NULL; + + bl->start = start; + bl->end = end; + + list_add_tail(&bl->list, &j->seq_blacklist); + return bl; +} + +/* + * Returns true if @seq is newer than the most recent journal entry that got + * written, and data corresponding to @seq should be ignored - also marks @seq + * as blacklisted so that on future restarts the corresponding data will still + * be ignored: + */ +int bch2_journal_seq_should_ignore(struct bch_fs *c, u64 seq, struct btree *b) +{ + struct journal *j = &c->journal; + struct journal_seq_blacklist *bl = NULL; + struct blacklisted_node *n; + u64 journal_seq; + int ret = 0; + + if (!seq) + return 0; + + spin_lock(&j->lock); + journal_seq = journal_cur_seq(j); + spin_unlock(&j->lock); + + /* Interier updates aren't journalled: */ + BUG_ON(b->level); + BUG_ON(seq > journal_seq && test_bit(BCH_FS_INITIAL_GC_DONE, &c->flags)); + + /* + * Decrease this back to j->seq + 2 when we next rev the on disk format: + * increasing it temporarily to work around bug in old kernels + */ + fsck_err_on(seq > journal_seq + 4, c, + "bset journal seq too far in the future: %llu > %llu", + seq, journal_seq); + + if (seq <= journal_seq && + list_empty_careful(&j->seq_blacklist)) + return 0; + + mutex_lock(&j->blacklist_lock); + + if (seq <= journal_seq) { + bl = bch2_journal_seq_blacklist_find(j, seq); + if (!bl) + goto out; + } else { + bch_verbose(c, "btree node %u:%llu:%llu has future journal sequence number %llu, blacklisting", + b->btree_id, b->key.k.p.inode, b->key.k.p.offset, seq); + + if (!j->new_blacklist) { + j->new_blacklist = bch2_journal_seq_blacklisted_new(j, + journal_seq + 1, + journal_seq + 1); + if (!j->new_blacklist) { + ret = -ENOMEM; + goto out; + } + } + bl = j->new_blacklist; + bl->end = max(bl->end, seq); + } + + for (n = bl->entries; n < bl->entries + bl->nr_entries; n++) + if (b->data->keys.seq == n->seq && + b->btree_id == n->btree_id && + !bkey_cmp(b->key.k.p, n->pos)) + goto found_entry; + + if (!bl->nr_entries || + is_power_of_2(bl->nr_entries)) { + n = krealloc(bl->entries, + max(bl->nr_entries * 2, 8UL) * sizeof(*n), + GFP_KERNEL); + if (!n) { + ret = -ENOMEM; + goto out; + } + bl->entries = n; + } + + bl->entries[bl->nr_entries++] = (struct blacklisted_node) { + .seq = b->data->keys.seq, + .btree_id = b->btree_id, + .pos = b->key.k.p, + }; +found_entry: + ret = 1; +out: +fsck_err: + mutex_unlock(&j->blacklist_lock); + return ret; +} + +static int __bch2_journal_seq_blacklist_read(struct journal *j, + struct journal_replay *i, + u64 start, u64 end) +{ + struct bch_fs *c = container_of(j, struct bch_fs, journal); + struct journal_seq_blacklist *bl; + + bch_verbose(c, "blacklisting existing journal seq %llu-%llu", + start, end); + + bl = bch2_journal_seq_blacklisted_new(j, start, end); + if (!bl) + return -ENOMEM; + + bch2_journal_pin_add(j, le64_to_cpu(i->j.seq), &bl->pin, + journal_seq_blacklist_flush); + return 0; +} + +/* + * After reading the journal, find existing journal seq blacklist entries and + * read them into memory: + */ +int bch2_journal_seq_blacklist_read(struct journal *j, + struct journal_replay *i) +{ + struct jset_entry *entry; + int ret = 0; + + vstruct_for_each(&i->j, entry) { + switch (entry->type) { + case BCH_JSET_ENTRY_blacklist: { + struct jset_entry_blacklist *bl_entry = + container_of(entry, struct jset_entry_blacklist, entry); + + ret = __bch2_journal_seq_blacklist_read(j, i, + le64_to_cpu(bl_entry->seq), + le64_to_cpu(bl_entry->seq)); + break; + } + case BCH_JSET_ENTRY_blacklist_v2: { + struct jset_entry_blacklist_v2 *bl_entry = + container_of(entry, struct jset_entry_blacklist_v2, entry); + + ret = __bch2_journal_seq_blacklist_read(j, i, + le64_to_cpu(bl_entry->start), + le64_to_cpu(bl_entry->end)); + break; + } + } + + if (ret) + break; + } + + return ret; +} + +/* + * After reading the journal and walking the btree, we might have new journal + * sequence numbers to blacklist - add entries to the next journal entry to be + * written: + */ +void bch2_journal_seq_blacklist_write(struct journal *j) +{ + struct journal_seq_blacklist *bl = j->new_blacklist; + struct jset_entry_blacklist_v2 *bl_entry; + struct jset_entry *entry; + + if (!bl) + return; + + entry = bch2_journal_add_entry_noreservation(journal_cur_buf(j), + (sizeof(*bl_entry) - sizeof(*entry)) / sizeof(u64)); + + bl_entry = container_of(entry, struct jset_entry_blacklist_v2, entry); + bl_entry->entry.type = BCH_JSET_ENTRY_blacklist_v2; + bl_entry->start = cpu_to_le64(bl->start); + bl_entry->end = cpu_to_le64(bl->end); + + bch2_journal_pin_add(j, + journal_cur_seq(j), + &bl->pin, + journal_seq_blacklist_flush); + + j->new_blacklist = NULL; +} -- cgit v1.2.3