diff options
| author | Stephen Rothwell <sfr@canb.auug.org.au> | 2008-03-26 13:11:47 +1100 |
|---|---|---|
| committer | Stephen Rothwell <sfr@canb.auug.org.au> | 2008-03-26 13:11:47 +1100 |
| commit | 41f1a00cba493bad91804d82f61361a0e65dfc46 (patch) | |
| tree | 6aa1a807d705c3c0f66ade6d7d06c2e95409ed68 | |
| parent | faed446511d69ef26b7648ebb28d7c8e91a3ca90 (diff) | |
| parent | 02d4802e87c778470111d80e5374bcddb908ecba (diff) | |
Merge branch 'quilt/ide'
Conflicts:
Documentation/ide/ide.txt
Documentation/kernel-parameters.txt
drivers/ide/ide.c
139 files changed, 4293 insertions, 6687 deletions
diff --git a/Documentation/ide/ide-tape.txt b/Documentation/ide/ide-tape.txt index 658f271a373f..3f348a0b21d8 100644 --- a/Documentation/ide/ide-tape.txt +++ b/Documentation/ide/ide-tape.txt @@ -1,146 +1,65 @@ -/* - * IDE ATAPI streaming tape driver. - * - * This driver is a part of the Linux ide driver. - * - * The driver, in co-operation with ide.c, basically traverses the - * request-list for the block device interface. The character device - * interface, on the other hand, creates new requests, adds them - * to the request-list of the block device, and waits for their completion. - * - * Pipelined operation mode is now supported on both reads and writes. - * - * The block device major and minor numbers are determined from the - * tape's relative position in the ide interfaces, as explained in ide.c. - * - * The character device interface consists of the following devices: - * - * ht0 major 37, minor 0 first IDE tape, rewind on close. - * ht1 major 37, minor 1 second IDE tape, rewind on close. - * ... - * nht0 major 37, minor 128 first IDE tape, no rewind on close. - * nht1 major 37, minor 129 second IDE tape, no rewind on close. - * ... - * - * The general magnetic tape commands compatible interface, as defined by - * include/linux/mtio.h, is accessible through the character device. - * - * General ide driver configuration options, such as the interrupt-unmask - * flag, can be configured by issuing an ioctl to the block device interface, - * as any other ide device. - * - * Our own ide-tape ioctl's can be issued to either the block device or - * the character device interface. - * - * Maximal throughput with minimal bus load will usually be achieved in the - * following scenario: - * - * 1. ide-tape is operating in the pipelined operation mode. - * 2. No buffering is performed by the user backup program. - * - * Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive. - * - * Here are some words from the first releases of hd.c, which are quoted - * in ide.c and apply here as well: - * - * | Special care is recommended. Have Fun! - * - * - * An overview of the pipelined operation mode. - * - * In the pipelined write mode, we will usually just add requests to our - * pipeline and return immediately, before we even start to service them. The - * user program will then have enough time to prepare the next request while - * we are still busy servicing previous requests. In the pipelined read mode, - * the situation is similar - we add read-ahead requests into the pipeline, - * before the user even requested them. - * - * The pipeline can be viewed as a "safety net" which will be activated when - * the system load is high and prevents the user backup program from keeping up - * with the current tape speed. At this point, the pipeline will get - * shorter and shorter but the tape will still be streaming at the same speed. - * Assuming we have enough pipeline stages, the system load will hopefully - * decrease before the pipeline is completely empty, and the backup program - * will be able to "catch up" and refill the pipeline again. - * - * When using the pipelined mode, it would be best to disable any type of - * buffering done by the user program, as ide-tape already provides all the - * benefits in the kernel, where it can be done in a more efficient way. - * As we will usually not block the user program on a request, the most - * efficient user code will then be a simple read-write-read-... cycle. - * Any additional logic will usually just slow down the backup process. - * - * Using the pipelined mode, I get a constant over 400 KBps throughput, - * which seems to be the maximum throughput supported by my tape. - * - * However, there are some downfalls: - * - * 1. We use memory (for data buffers) in proportional to the number - * of pipeline stages (each stage is about 26 KB with my tape). - * 2. In the pipelined write mode, we cheat and postpone error codes - * to the user task. In read mode, the actual tape position - * will be a bit further than the last requested block. - * - * Concerning (1): - * - * 1. We allocate stages dynamically only when we need them. When - * we don't need them, we don't consume additional memory. In - * case we can't allocate stages, we just manage without them - * (at the expense of decreased throughput) so when Linux is - * tight in memory, we will not pose additional difficulties. - * - * 2. The maximum number of stages (which is, in fact, the maximum - * amount of memory) which we allocate is limited by the compile - * time parameter IDETAPE_MAX_PIPELINE_STAGES. - * - * 3. The maximum number of stages is a controlled parameter - We - * don't start from the user defined maximum number of stages - * but from the lower IDETAPE_MIN_PIPELINE_STAGES (again, we - * will not even allocate this amount of stages if the user - * program can't handle the speed). We then implement a feedback - * loop which checks if the pipeline is empty, and if it is, we - * increase the maximum number of stages as necessary until we - * reach the optimum value which just manages to keep the tape - * busy with minimum allocated memory or until we reach - * IDETAPE_MAX_PIPELINE_STAGES. - * - * Concerning (2): - * - * In pipelined write mode, ide-tape can not return accurate error codes - * to the user program since we usually just add the request to the - * pipeline without waiting for it to be serviced. In case an error - * occurs, I will report it on the next user request. - * - * In the pipelined read mode, subsequent read requests or forward - * filemark spacing will perform correctly, as we preserve all blocks - * and filemarks which we encountered during our excess read-ahead. - * - * For accurate tape positioning and error reporting, disabling - * pipelined mode might be the best option. - * - * You can enable/disable/tune the pipelined operation mode by adjusting - * the compile time parameters below. - * - * - * Possible improvements. - * - * 1. Support for the ATAPI overlap protocol. - * - * In order to maximize bus throughput, we currently use the DSC - * overlap method which enables ide.c to service requests from the - * other device while the tape is busy executing a command. The - * DSC overlap method involves polling the tape's status register - * for the DSC bit, and servicing the other device while the tape - * isn't ready. - * - * In the current QIC development standard (December 1995), - * it is recommended that new tape drives will *in addition* - * implement the ATAPI overlap protocol, which is used for the - * same purpose - efficient use of the IDE bus, but is interrupt - * driven and thus has much less CPU overhead. - * - * ATAPI overlap is likely to be supported in most new ATAPI - * devices, including new ATAPI cdroms, and thus provides us - * a method by which we can achieve higher throughput when - * sharing a (fast) ATA-2 disk with any (slow) new ATAPI device. - */ +IDE ATAPI streaming tape driver. + +This driver is a part of the Linux ide driver. + +The driver, in co-operation with ide.c, basically traverses the +request-list for the block device interface. The character device +interface, on the other hand, creates new requests, adds them +to the request-list of the block device, and waits for their completion. + +The block device major and minor numbers are determined from the +tape's relative position in the ide interfaces, as explained in ide.c. + +The character device interface consists of the following devices: + +ht0 major 37, minor 0 first IDE tape, rewind on close. +ht1 major 37, minor 1 second IDE tape, rewind on close. +... +nht0 major 37, minor 128 first IDE tape, no rewind on close. +nht1 major 37, minor 129 second IDE tape, no rewind on close. +... + +The general magnetic tape commands compatible interface, as defined by +include/linux/mtio.h, is accessible through the character device. + +General ide driver configuration options, such as the interrupt-unmask +flag, can be configured by issuing an ioctl to the block device interface, +as any other ide device. + +Our own ide-tape ioctl's can be issued to either the block device or +the character device interface. + +Maximal throughput with minimal bus load will usually be achieved in the +following scenario: + + 1. ide-tape is operating in the pipelined operation mode. + 2. No buffering is performed by the user backup program. + +Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive. + +Here are some words from the first releases of hd.c, which are quoted +in ide.c and apply here as well: + +| Special care is recommended. Have Fun! + +Possible improvements: + +1. Support for the ATAPI overlap protocol. + +In order to maximize bus throughput, we currently use the DSC +overlap method which enables ide.c to service requests from the +other device while the tape is busy executing a command. The +DSC overlap method involves polling the tape's status register +for the DSC bit, and servicing the other device while the tape +isn't ready. + +In the current QIC development standard (December 1995), +it is recommended that new tape drives will *in addition* +implement the ATAPI overlap protocol, which is used for the +same purpose - efficient use of the IDE bus, but is interrupt +driven and thus has much less CPU overhead. + +ATAPI overlap is likely to be supported in most new ATAPI +devices, including new ATAPI cdroms, and thus provides us +a method by which we can achieve higher throughput when +sharing a (fast) ATA-2 disk with any (slow) new ATAPI device. diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt index ce7c01af30f6..0c78f4b1d9d9 100644 --- a/Documentation/ide/ide.txt +++ b/Documentation/ide/ide.txt @@ -71,29 +71,6 @@ This driver automatically probes for most IDE interfaces (including all PCI ones), for the drives/geometries attached to those interfaces, and for the IRQ lines being used by the interfaces (normally 14, 15 for ide0/ide1). -For special cases, interfaces may be specified using kernel "command line" -options. For example, - - ide3=0x168,0x36e,10 /* ioports 0x168-0x16f,0x36e, irq 10 */ - -Normally the irq number need not be specified, as ide.c will probe for it: - - ide3=0x168,0x36e /* ioports 0x168-0x16f,0x36e */ - -The standard port, and irq values are these: - - ide0=0x1f0,0x3f6,14 - ide1=0x170,0x376,15 - ide2=0x1e8,0x3ee,11 - ide3=0x168,0x36e,10 - -Note that the first parameter reserves 8 contiguous ioports, whereas the -second value denotes a single ioport. If in doubt, do a 'cat /proc/ioports'. - -In all probability the device uses these ports and IRQs if it is attached -to the appropriate ide channel. Pass the parameter for the correct ide -channel to the kernel, as explained above. - Any number of interfaces may share a single IRQ if necessary, at a slight performance penalty, whether on separate cards or a single VLB card. The IDE driver automatically detects and handles this. However, this may @@ -105,27 +82,26 @@ Drives are normally found by auto-probing and/or examining the CMOS/BIOS data. For really weird situations, the apparent (fdisk) geometry can also be specified on the kernel "command line" using LILO. The format of such lines is: - hdx=cyls,heads,sects -or hdx=cdrom + ide_core.chs=[interface_number.device_number]:cyls,heads,sects +or ide_core.cdrom=[interface_number.device_number] -where hdx can be any of hda through hdh, Three values are required -(cyls,heads,sects). For example: +For example: - hdc=1050,32,64 hdd=cdrom + ide_core.chs=1.0:1050,32,64 ide_core.cdrom=1.1 -either {hda,hdb} or {hdc,hdd}. The results of successful auto-probing may -override the physical geometry/irq specified, though the "original" geometry -may be retained as the "logical" geometry for partitioning purposes (fdisk). +The results of successful auto-probing may override the physical geometry/irq +specified, though the "original" geometry may be retained as the "logical" +geometry for partitioning purposes (fdisk). If the auto-probing during boot time confuses a drive (ie. the drive works with hd.c but not with ide.c), then an command line option may be specified for each drive for which you'd like the drive to skip the hardware probe/identification sequence. For example: - hdb=noprobe + ide_core.noprobe=0.1 or - hdc=768,16,32 - hdc=noprobe + ide_core.chs=1.0:768,16,32 + ide_core.noprobe=1.0 Note that when only one IDE device is attached to an interface, it should be jumpered as "single" or "master", *not* "slave". Many folks have had @@ -141,9 +117,9 @@ If for some reason your cdrom drive is *not* found at boot time, you can force the probe to look harder by supplying a kernel command line parameter via LILO, such as: - hdc=cdrom /* hdc = "master" on second interface */ + ide_core.cdrom=1.0 /* "master" on second interface (hdc) */ or - hdd=cdrom /* hdd = "slave" on second interface */ + ide_core.cdrom=1.1 /* "slave" on second interface (hdd) */ For example, a GW2000 system might have a hard drive on the primary interface (/dev/hda) and an IDE cdrom drive on the secondary interface @@ -184,13 +160,6 @@ provided it is mounted with the default block size of 1024 (as above). Please pass on any feedback on any of this stuff to the maintainer, whose address can be found in linux/MAINTAINERS. -Note that if BOTH hd.c and ide.c are configured into the kernel, -hd.c will normally be allowed to control the primary IDE interface. -This is useful for older hardware that may be incompatible with ide.c, -and still allows newer hardware to run on the 2nd/3rd/4th IDE ports -under control of ide.c. To have ide.c also "take over" the primary -IDE port in this situation, use the "command line" parameter: ide0=0x1f0 - The IDE driver is modularized. The high level disk/CD-ROM/tape/floppy drivers can always be compiled as loadable modules, the chipset drivers can only be compiled into the kernel, and the core code (ide.c) can be @@ -204,9 +173,7 @@ to /etc/modprobe.conf. When ide.c is used as a module, you can pass command line parameters to the driver using the "options=" keyword to insmod, while replacing any ',' with -';'. For example: - - insmod ide.o options="ide0=serialize ide1=serialize ide2=0x1e8;0x3ee;11" +';'. ================================================================================ @@ -214,79 +181,48 @@ driver using the "options=" keyword to insmod, while replacing any ',' with Summary of ide driver parameters for kernel command line -------------------------------------------------------- - "hdx=" is recognized for all "x" from "a" to "u", such as "hdc". - - "idex=" is recognized for all "x" from "0" to "9", such as "ide1". - - "hdx=noprobe" : drive may be present, but do not probe for it - - "hdx=none" : drive is NOT present, ignore cmos and do not probe - - "hdx=nowerr" : ignore the WRERR_STAT bit on this drive - - "hdx=cdrom" : drive is present, and is a cdrom drive - - "hdx=cyl,head,sect" : disk drive is present, with specified geometry - - "hdx=autotune" : driver will attempt to tune interface speed - to the fastest PIO mode supported, - if possible for this drive only. - Not fully supported by all chipset types, - and quite likely to cause trouble with - older/odd IDE drives. - - "hdx=nodma" : disallow DMA +For legacy IDE VLB host drivers (ali14xx/dtc2278/ht6560b/qd65xx/umc8672) +you need to explicitly enable probing by using "probe" kernel parameter, +i.e. to enable probing for ALI M14xx chipsets (ali14xx host driver) use: - "idebus=xx" : inform IDE driver of VESA/PCI bus speed in MHz, - where "xx" is between 20 and 66 inclusive, - used when tuning chipset PIO modes. - For PCI bus, 25 is correct for a P75 system, - 30 is correct for P90,P120,P180 systems, - and 33 is used for P100,P133,P166 systems. - If in doubt, use idebus=33 for PCI. - As for VLB, it is safest to not specify it. - Bigger values are safer than smaller ones. +* "ali14xx.probe" boot option when ali14xx driver is built-in the kernel - "idex=base" : probe for an interface at the addr specified, - where "base" is usually 0x1f0 or 0x170 - and "ctl" is assumed to be "base"+0x206 +* "probe" module parameter when ali14xx driver is compiled as module + ("modprobe ali14xx probe") - "idex=base,ctl" : specify both base and ctl +Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb" +kernel paremeter to enable probing for VLB version of the chipset (PCI ones +are detected automatically). - "idex=base,ctl,irq" : specify base, ctl, and irq number +You also need to use "probe" kernel parameter for ide-4drives driver +(support for IDE generic chipset with four drives on one port). - "idex=serialize" : do not overlap operations on idex. Please note - that you will have to specify this option for - both the respective primary and secondary channel - to take effect. +To enable support for IDE doublers on Amiga use "doubler" kernel parameter +for gayle host driver (i.e. "gayle.doubler" if the driver is built-in). - "idex=four" : four drives on idex and ide(x^1) share same ports +To force ignoring cable detection (this should be needed only if you're using +short 40-wires cable which cannot be automatically detected - if this is not +a case please report it as a bug instead) use "ignore_cable" kernel parameter: - "idex=reset" : reset interface after probe +* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in + (i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1") - "idex=ata66" : informs the interface that it has an 80c cable - for chipsets that are ATA-66 capable, but the - ability to bit test for detection is currently - unknown. +* "ignore_cable=[interface_number]" module parameter (for ide_core module) + if IDE is compiled as module - "ide=doubler" : probe/support IDE doublers on Amiga +Other kernel parameters for ide_core are: -There may be more options than shown -- use the source, Luke! +* "nodma=[interface_number.device_number]" to disallow DMA for a device -Everything else is rejected with a "BAD OPTION" message. +* "noflush=[interface_number.device_number]" to disable flush requests -For legacy IDE VLB host drivers (ali14xx/dtc2278/ht6560b/qd65xx/umc8672) -you need to explicitly enable probing by using "probe" kernel parameter, -i.e. to enable probing for ALI M14xx chipsets (ali14xx host driver) use: +* "noprobe=[interface_number.device_number]" to skip probing -* "ali14xx.probe" boot option when ali14xx driver is built-in the kernel +* "nowerr=[interface_number.device_number]" to ignore the WRERR_STAT bit -* "probe" module parameter when ali14xx driver is compiled as module - ("modprobe ali14xx probe") +* "cdrom=[interface_number.device_number]" to force device as a CD-ROM -Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb" -kernel paremeter to enable probing for VLB version of the chipset (PCI ones -are detected automatically). +* "chs=[interface_number.device_number]" to force device as a disk (using CHS) ================================================================================ diff --git a/Documentation/ide/warm-plug-howto.txt b/Documentation/ide/warm-plug-howto.txt new file mode 100644 index 000000000000..d5885468b072 --- /dev/null +++ b/Documentation/ide/warm-plug-howto.txt @@ -0,0 +1,13 @@ + +IDE warm-plug HOWTO +=================== + +To warm-plug devices on a port 'idex': + +# echo -n "1" > /sys/class/ide_port/idex/delete_devices + +unplug old device(s) and plug new device(s) + +# echo -n "1" > /sys/class/ide_port/idex/scan + +done diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 2e22628411ad..a56df29c18ee 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -708,9 +708,6 @@ and is between 256 and 4096 characters. It is defined in the file hd= [EIDE] (E)IDE hard drive subsystem geometry Format: <cyl>,<head>,<sect> - hd?= [HW] (E)IDE subsystem - hd?lun= See Documentation/ide/ide.txt. - highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact size of <nn>. This works even on boxes that have no highmem otherwise. This also works to reduce highmem @@ -767,10 +764,6 @@ and is between 256 and 4096 characters. It is defined in the file Format: ide=nodma or ide=doubler See Documentation/ide/ide.txt. - ide?= [HW] (E)IDE subsystem - Format: ide?=noprobe or chipset specific parameters. - See Documentation/ide/ide.txt. - idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed See Documentation/ide/ide.txt. diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README index 5c8334123f4f..25a6ed1aaa5b 100644 --- a/Documentation/mips/AU1xxx_IDE.README +++ b/Documentation/mips/AU1xxx_IDE.README @@ -46,8 +46,6 @@ Two files are introduced: a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h' containes : struct _auide_hwif - struct drive_list_entry dma_white_list - struct drive_list_entry dma_black_list timing parameters for PIO mode 0/1/2/3/4 timing parameters for MWDMA 0/1/2 @@ -63,12 +61,6 @@ Four configs variables are introduced: CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size per descriptor -If MWDMA is enabled and the connected hard disc is not on the white list, the -kernel switches to a "safe mwdma mode" at boot time. In this mode the IDE -performance is substantial slower then in full speed mwdma. In this case -please add your hard disc to the white list (follow instruction from 'ADD NEW -HARD DISC TO WHITE OR BLACK LIST' section). - SUPPORTED IDE MODES ------------------- @@ -120,44 +112,6 @@ CONFIG_IDEDMA_AUTO=y Also undefine 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to disable the burst support on DBDMA controller. -ADD NEW HARD DISC TO WHITE OR BLACK LIST ----------------------------------------- - -Step 1 : detect the model name of your hard disc - - a) connect your hard disc to the AU1XXX - - b) boot your kernel and get the hard disc model. - - Example boot log: - - --snipped-- - Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 - ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx - Au1xxx IDE(builtin) configured for MWDMA2 - Probing IDE interface ide0... - hda: Maxtor 6E040L0, ATA DISK drive - ide0 at 0xac800000-0xac800007,0xac8001c0 on irq 64 - hda: max request size: 64KiB - hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, (U)DMA - --snipped-- - - In this example 'Maxtor 6E040L0'. - -Step 2 : edit 'include/asm-mips/mach-au1x00/au1xxx_ide.h' - - Add your hard disc to the dma_white_list or dma_black_list structur. - -Step 3 : Recompile the kernel - - Enable MWDMA support in the kernel configuration. Recompile the kernel and - reboot. - -Step 4 : Tests - - If you have add a hard disc to the white list, please run some stress tests - for verification. - ACKNOWLEDGMENTS --------------- diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index cd870a823d18..06d918d94dd1 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -10,9 +10,6 @@ #include <linux/reboot.h> #include <linux/delay.h> #include <linux/initrd.h> -#if defined(CONFIG_IDE) || defined(CONFIG_IDE_MODULE) -#include <linux/ide.h> -#endif #include <linux/tty.h> #include <linux/bootmem.h> #include <linux/seq_file.h> @@ -51,11 +48,6 @@ extern void bootx_init(unsigned long r4, unsigned long phys); -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -struct ide_machdep_calls ppc_ide_md; -EXPORT_SYMBOL(ppc_ide_md); -#endif - int boot_cpuid; EXPORT_SYMBOL_GPL(boot_cpuid); int boot_cpuid_phys; diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 1c58db9d42cb..bcf50d7056e9 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -1144,28 +1144,6 @@ void __init pmac_pcibios_after_init(void) { struct device_node* nd; -#ifdef CONFIG_BLK_DEV_IDE - struct pci_dev *dev = NULL; - - /* OF fails to initialize IDE controllers on macs - * (and maybe other machines) - * - * Ideally, this should be moved to the IDE layer, but we need - * to check specifically with Andre Hedrick how to do it cleanly - * since the common IDE code seem to care about the fact that the - * BIOS may have disabled a controller. - * - * -- BenH - */ - for_each_pci_dev(dev) { - if ((dev->class >> 16) != PCI_BASE_CLASS_STORAGE) - continue; - if (pci_enable_device(dev)) - printk(KERN_WARNING - "pci: Failed to enable %s\n", pci_name(dev)); - } -#endif /* CONFIG_BLK_DEV_IDE */ - for_each_node_by_name(nd, "firewire") { if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") || of_device_is_compatible(nd, "pci106b,30") || diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h index b3abaaf61eb4..3362e781b6a7 100644 --- a/arch/powerpc/platforms/powermac/pmac.h +++ b/arch/powerpc/platforms/powermac/pmac.h @@ -2,7 +2,6 @@ #define __PMAC_H__ #include <linux/pci.h> -#include <linux/ide.h> #include <linux/irq.h> /* @@ -35,10 +34,6 @@ extern void pmac_check_ht_link(void); extern void pmac_setup_smp(void); -extern unsigned long pmac_ide_get_base(int index); -extern void pmac_ide_init_hwif_ports(hw_regs_t *hw, - unsigned long data_port, unsigned long ctrl_port, int *irq); - extern int pmac_nvram_init(void); extern void pmac_pic_init(void); diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 36ff1b6b7fac..2693fc371eab 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -574,14 +574,6 @@ static int __init pmac_probe(void) ISA_DMA_THRESHOLD = ~0L; DMA_MODE_READ = 1; DMA_MODE_WRITE = 2; - -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -#ifdef CONFIG_BLK_DEV_IDE_PMAC - ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports; - ppc_ide_md.default_io_base = pmac_ide_get_base; -#endif /* CONFIG_BLK_DEV_IDE_PMAC */ -#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */ - #endif /* CONFIG_PPC32 */ #ifdef CONFIG_PMAC_SMU diff --git a/arch/ppc/configs/sandpoint_defconfig b/arch/ppc/configs/sandpoint_defconfig index fb493a67c60d..9525e34138fc 100644 --- a/arch/ppc/configs/sandpoint_defconfig +++ b/arch/ppc/configs/sandpoint_defconfig @@ -189,7 +189,7 @@ CONFIG_IDE_TASKFILE_IO=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_SL82C105=y # CONFIG_BLK_DEV_IDEPCI is not set # CONFIG_BLK_DEV_IDEDMA is not set # CONFIG_IDEDMA_AUTO is not set diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index c35350250cfc..2ba659f401be 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -12,7 +12,6 @@ #include <linux/irq.h> #include <linux/pci.h> #include <linux/delay.h> -#include <linux/ide.h> #include <linux/pm.h> #include <linux/bitops.h> @@ -124,10 +123,6 @@ EXPORT_SYMBOL(__ioremap); EXPORT_SYMBOL(iounmap); EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */ -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -EXPORT_SYMBOL(ppc_ide_md); -#endif - #ifdef CONFIG_PCI EXPORT_SYMBOL(isa_io_base); EXPORT_SYMBOL(isa_mem_base); diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 294055902f0c..bfddfdee0b65 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -10,7 +10,6 @@ #include <linux/reboot.h> #include <linux/delay.h> #include <linux/initrd.h> -#include <linux/ide.h> #include <linux/screen_info.h> #include <linux/bootmem.h> #include <linux/seq_file.h> @@ -57,7 +56,6 @@ extern void ppc6xx_idle(void); extern void power4_idle(void); extern boot_infos_t *boot_infos; -struct ide_machdep_calls ppc_ide_md; /* Used with the BI_MEMSIZE bootinfo parameter to store the memory size value reported by the boot loader. */ diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c index 017623c9bc4b..01f20f4c14fe 100644 --- a/arch/ppc/platforms/4xx/bamboo.c +++ b/arch/ppc/platforms/4xx/bamboo.c @@ -22,7 +22,6 @@ #include <linux/blkdev.h> #include <linux/console.h> #include <linux/delay.h> -#include <linux/ide.h> #include <linux/initrd.h> #include <linux/seq_file.h> #include <linux/root_dev.h> diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c index 453643a0eeea..8027a36fc5bb 100644 --- a/arch/ppc/platforms/4xx/ebony.c +++ b/arch/ppc/platforms/4xx/ebony.c @@ -25,7 +25,6 @@ #include <linux/blkdev.h> #include <linux/console.h> #include <linux/delay.h> -#include <linux/ide.h> #include <linux/initrd.h> #include <linux/seq_file.h> #include <linux/root_dev.h> diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c index b79ebb8a3e6c..f6d8c2e8b6b7 100644 --- a/arch/ppc/platforms/4xx/luan.c +++ b/arch/ppc/platforms/4xx/luan.c @@ -23,7 +23,6 @@ #include <linux/blkdev.h> #include <linux/console.h> #include <linux/delay.h> -#include <linux/ide.h> #include <linux/initrd.h> #include <linux/seq_file.h> #include <linux/root_dev.h> diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index 28a712cd4800..308386ef6f77 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -23,7 +23,6 @@ #include <linux/blkdev.h> #include <linux/console.h> #include <linux/delay.h> -#include <linux/ide.h> #include <linux/initrd.h> #include <linux/seq_file.h> #include <linux/root_dev.h> diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c index f6a0c6650f33..115694275083 100644 --- a/arch/ppc/platforms/4xx/taishan.c +++ b/arch/ppc/platforms/4xx/taishan.c @@ -23,7 +23,6 @@ #include <linux/blkdev.h> #include <linux/console.h> #include <linux/delay.h> -#include <linux/ide.h> #include <linux/initrd.h> #include <linux/seq_file.h> #include <linux/root_dev.h> diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c index 66a44ff0d926..f6cfd44281fc 100644 --- a/arch/ppc/platforms/4xx/yucca.c +++ b/arch/ppc/platforms/4xx/yucca.c @@ -24,7 +24,6 @@ #include <linux/blkdev.h> #include <linux/console.h> #include <linux/delay.h> -#include <linux/ide.h> #include <linux/initrd.h> #include <linux/seq_file.h> #include <linux/root_dev.h> diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c index dcd6070b85eb..27c140f218ed 100644 --- a/arch/ppc/platforms/chestnut.c +++ b/arch/ppc/platforms/chestnut.c @@ -22,7 +22,6 @@ #include <linux/initrd.h> #include <linux/delay.h> #include <linux/seq_file.h> -#include <linux/ide.h> #include <linux/serial.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> diff --git a/arch/ppc/platforms/cpci690.c b/arch/ppc/platforms/cpci690.c index e78bccf96c9d..07f672d58767 100644 --- a/arch/ppc/platforms/cpci690.c +++ b/arch/ppc/platforms/cpci690.c @@ -10,7 +10,6 @@ */ #include <linux/delay.h> #include <linux/pci.h> -#include <linux/ide.h> #include <linux/irq.h> #include <linux/fs.h> #include <linux/seq_file.h> diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c index c1f77e1d368e..f522b31c46d7 100644 --- a/arch/ppc/platforms/ev64260.c +++ b/arch/ppc/platforms/ev64260.c @@ -23,7 +23,6 @@ #include <linux/delay.h> #include <linux/pci.h> -#include <linux/ide.h> #include <linux/irq.h> #include <linux/fs.h> #include <linux/seq_file.h> diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c index ca5de13712fd..904b518c152e 100644 --- a/arch/ppc/platforms/hdpu.c +++ b/arch/ppc/platforms/hdpu.c @@ -16,7 +16,6 @@ #include <linux/pci.h> #include <linux/delay.h> #include <linux/irq.h> -#include <linux/ide.h> #include <linux/seq_file.h> #include <linux/platform_device.h> @@ -604,41 +603,6 @@ static void parse_bootinfo(unsigned long r3, } } -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -static void -hdpu_ide_request_region(ide_ioreg_t from, unsigned int extent, const char *name) -{ - request_region(from, extent, name); - return; -} - -static void hdpu_ide_release_region(ide_ioreg_t from, unsigned int extent) -{ - release_region(from, extent); - return; -} - -static void __init -hdpu_ide_pci_init_hwif_ports(hw_regs_t * hw, ide_ioreg_t data_port, - ide_ioreg_t ctrl_port, int *irq) -{ - struct pci_dev *dev; - - pci_for_each_dev(dev) { - if (((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) || - ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID)) { - hw->irq = dev->irq; - - if (irq != NULL) { - *irq = dev->irq; - } - } - } - - return; -} -#endif - void hdpu_heartbeat(void) { if (mv64x60_read(&bh, MV64x60_GPP_VALUE) & (1 << 5)) diff --git a/arch/ppc/platforms/lopec.c b/arch/ppc/platforms/lopec.c index b947c774f524..1e3aa6e9b6c7 100644 --- a/arch/ppc/platforms/lopec.c +++ b/arch/ppc/platforms/lopec.c @@ -15,7 +15,6 @@ #include <linux/pci_ids.h> #include <linux/ioport.h> #include <linux/init.h> -#include <linux/ide.h> #include <linux/seq_file.h> #include <linux/initrd.h> #include <linux/console.h> @@ -168,85 +167,6 @@ lopec_power_off(void) lopec_halt(); } -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -int lopec_ide_ports_known = 0; -static unsigned long lopec_ide_regbase[MAX_HWIFS]; -static unsigned long lopec_ide_ctl_regbase[MAX_HWIFS]; -static unsigned long lopec_idedma_regbase; - -static void -lopec_ide_probe(void) -{ - struct pci_dev *dev = pci_get_device(PCI_VENDOR_ID_WINBOND, - PCI_DEVICE_ID_WINBOND_82C105, - NULL); - lopec_ide_ports_known = 1; - - if (dev) { - lopec_ide_regbase[0] = dev->resource[0].start; - lopec_ide_regbase[1] = dev->resource[2].start; - lopec_ide_ctl_regbase[0] = dev->resource[1].start; - lopec_ide_ctl_regbase[1] = dev->resource[3].start; - lopec_idedma_regbase = dev->resource[4].start; - pci_dev_put(dev); - } -} - -static int -lopec_ide_default_irq(unsigned long base) -{ - if (lopec_ide_ports_known == 0) - lopec_ide_probe(); - - if (base == lopec_ide_regbase[0]) - return 14; - else if (base == lopec_ide_regbase[1]) - return 15; - else - return 0; -} - -static unsigned long -lopec_ide_default_io_base(int index) -{ - if (lopec_ide_ports_known == 0) - lopec_ide_probe(); - return lopec_ide_regbase[index]; -} - -static void __init -lopec_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data, - unsigned long ctl, int *irq) -{ - unsigned long reg = data; - uint alt_status_base; - int i; - - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) - hw->io_ports[i] = reg++; - - if (data == lopec_ide_regbase[0]) { - alt_status_base = lopec_ide_ctl_regbase[0] + 2; - hw->irq = 14; - } else if (data == lopec_ide_regbase[1]) { - alt_status_base = lopec_ide_ctl_regbase[1] + 2; - hw->irq = 15; - } else { - alt_status_base = 0; - hw->irq = 0; - } - - if (ctl) - hw->io_ports[IDE_CONTROL_OFFSET] = ctl; - else - hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base; - - if (irq != NULL) - *irq = hw->irq; - -} -#endif /* BLK_DEV_IDE */ - static void __init lopec_init_IRQ(void) { @@ -384,11 +304,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, ppc_md.nvram_read_val = todc_direct_read_val; ppc_md.nvram_write_val = todc_direct_write_val; -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) - ppc_ide_md.default_irq = lopec_ide_default_irq; - ppc_ide_md.default_io_base = lopec_ide_default_io_base; - ppc_ide_md.ide_init_hwif = lopec_ide_init_hwif_ports; -#endif #ifdef CONFIG_SERIAL_TEXT_DEBUG ppc_md.progress = gen550_progress; #endif diff --git a/arch/ppc/platforms/mvme5100.c b/arch/ppc/platforms/mvme5100.c index bb8d4a45437a..053b54ac88f2 100644 --- a/arch/ppc/platforms/mvme5100.c +++ b/arch/ppc/platforms/mvme5100.c @@ -17,7 +17,6 @@ #include <linux/initrd.h> #include <linux/console.h> #include <linux/delay.h> -#include <linux/ide.h> #include <linux/seq_file.h> #include <linux/kdev_t.h> #include <linux/root_dev.h> diff --git a/arch/ppc/platforms/powerpmc250.c b/arch/ppc/platforms/powerpmc250.c index 4d46650e07fd..162dc85ff7be 100644 --- a/arch/ppc/platforms/powerpmc250.c +++ b/arch/ppc/platforms/powerpmc250.c @@ -25,7 +25,6 @@ #include <linux/delay.h> #include <linux/slab.h> #include <linux/seq_file.h> -#include <linux/ide.h> #include <linux/root_dev.h> #include <asm/byteorder.h> diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c index 8a1788c48155..cbcac85c7a78 100644 --- a/arch/ppc/platforms/pplus.c +++ b/arch/ppc/platforms/pplus.c @@ -19,7 +19,6 @@ #include <linux/ioport.h> #include <linux/console.h> #include <linux/pci.h> -#include <linux/ide.h> #include <linux/seq_file.h> #include <linux/root_dev.h> @@ -668,57 +667,6 @@ static void __init pplus_init_IRQ(void) ppc_md.progress("init_irq: exit", 0); } -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -/* - * IDE stuff. - */ -static int pplus_ide_default_irq(unsigned long base) -{ - switch (base) { - case 0x1f0: - return 14; - case 0x170: - return 15; - default: - return 0; - } -} - -static unsigned long pplus_ide_default_io_base(int index) -{ - switch (index) { - case 0: - return 0x1f0; - case 1: - return 0x170; - default: - return 0; - } -} - -static void __init -pplus_ide_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, - unsigned long ctrl_port, int *irq) -{ - unsigned long reg = data_port; - int i; - - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { - hw->io_ports[i] = reg; - reg += 1; - } - - if (ctrl_port) - hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port; - else - hw->io_ports[IDE_CONTROL_OFFSET] = - hw->io_ports[IDE_DATA_OFFSET] + 0x206; - - if (irq != NULL) - *irq = pplus_ide_default_irq(data_port); -} -#endif - #ifdef CONFIG_SMP /* PowerPlus (MTX) support */ static int __init smp_pplus_probe(void) @@ -884,12 +832,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, ppc_md.find_end_of_memory = pplus_find_end_of_memory; ppc_md.setup_io_mappings = pplus_map_io; -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) - ppc_ide_md.default_irq = pplus_ide_default_irq; - ppc_ide_md.default_io_base = pplus_ide_default_io_base; - ppc_ide_md.ide_init_hwif = pplus_ide_init_hwif_ports; -#endif - #ifdef CONFIG_SERIAL_TEXT_DEBUG ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_TEXT_DEBUG */ diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c index 38449855d5ff..465b658c927d 100644 --- a/arch/ppc/platforms/prep_setup.c +++ b/arch/ppc/platforms/prep_setup.c @@ -33,7 +33,6 @@ #include <linux/console.h> #include <linux/timex.h> #include <linux/pci.h> -#include <linux/ide.h> #include <linux/seq_file.h> #include <linux/root_dev.h> @@ -894,38 +893,6 @@ prep_init_IRQ(void) i8259_init(MPC10X_MAPA_PCI_INTACK_ADDR, 0); } -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -/* - * IDE stuff. - */ -static int -prep_ide_default_irq(unsigned long base) -{ - switch (base) { - case 0x1f0: return 13; - case 0x170: return 13; - case 0x1e8: return 11; - case 0x168: return 10; - case 0xfff0: return 14; /* MCP(N)750 ide0 */ - case 0xffe0: return 15; /* MCP(N)750 ide1 */ - default: return 0; - } -} - -static unsigned long -prep_ide_default_io_base(int index) -{ - switch (index) { - case 0: return 0x1f0; - case 1: return 0x170; - case 2: return 0x1e8; - case 3: return 0x168; - default: - return 0; - } -} -#endif - #ifdef CONFIG_SMP /* PReP (MTX) support */ static int __init @@ -1070,11 +1037,6 @@ prep_init(unsigned long r3, unsigned long r4, unsigned long r5, ppc_md.setup_io_mappings = prep_map_io; -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) - ppc_ide_md.default_irq = prep_ide_default_irq; - ppc_ide_md.default_io_base = prep_ide_default_io_base; -#endif - #ifdef CONFIG_SMP smp_ops = &prep_smp_ops; #endif /* CONFIG_SMP */ diff --git a/arch/ppc/platforms/prpmc750.c b/arch/ppc/platforms/prpmc750.c index fcab513e206d..93bd593cf957 100644 --- a/arch/ppc/platforms/prpmc750.c +++ b/arch/ppc/platforms/prpmc750.c @@ -22,7 +22,6 @@ #include <linux/console.h> #include <linux/delay.h> #include <linux/seq_file.h> -#include <linux/ide.h> #include <linux/root_dev.h> #include <linux/slab.h> #include <linux/serial_reg.h> diff --git a/arch/ppc/platforms/prpmc800.c b/arch/ppc/platforms/prpmc800.c index f4ade5cd7a88..5bcda7f92cd0 100644 --- a/arch/ppc/platforms/prpmc800.c +++ b/arch/ppc/platforms/prpmc800.c @@ -20,7 +20,6 @@ #include <linux/console.h> #include <linux/delay.h> #include <linux/seq_file.h> -#include <linux/ide.h> #include <linux/root_dev.h> #include <linux/harrier_defs.h> diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c index 44d4398a36ff..179b4a99b5b5 100644 --- a/arch/ppc/platforms/radstone_ppc7d.c +++ b/arch/ppc/platforms/radstone_ppc7d.c @@ -29,7 +29,6 @@ #include <linux/initrd.h> #include <linux/console.h> #include <linux/delay.h> -#include <linux/ide.h> #include <linux/seq_file.h> #include <linux/root_dev.h> #include <linux/serial.h> diff --git a/arch/ppc/platforms/residual.c b/arch/ppc/platforms/residual.c index c9911601cfdf..18495e754e30 100644 --- a/arch/ppc/platforms/residual.c +++ b/arch/ppc/platforms/residual.c @@ -38,7 +38,6 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/pci.h> -#include <linux/ide.h> #include <asm/sections.h> #include <asm/mmu.h> diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c index 3352fae1c722..b4897bdb742a 100644 --- a/arch/ppc/platforms/sandpoint.c +++ b/arch/ppc/platforms/sandpoint.c @@ -71,7 +71,6 @@ #include <linux/initrd.h> #include <linux/console.h> #include <linux/delay.h> -#include <linux/ide.h> #include <linux/seq_file.h> #include <linux/root_dev.h> #include <linux/serial.h> @@ -559,93 +558,6 @@ sandpoint_show_cpuinfo(struct seq_file *m) return 0; } -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -/* - * IDE support. - */ -static int sandpoint_ide_ports_known = 0; -static unsigned long sandpoint_ide_regbase[MAX_HWIFS]; -static unsigned long sandpoint_ide_ctl_regbase[MAX_HWIFS]; -static unsigned long sandpoint_idedma_regbase; - -static void -sandpoint_ide_probe(void) -{ - struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_WINBOND, - PCI_DEVICE_ID_WINBOND_82C105, NULL); - - if (pdev) { - sandpoint_ide_regbase[0]=pdev->resource[0].start; - sandpoint_ide_regbase[1]=pdev->resource[2].start; - sandpoint_ide_ctl_regbase[0]=pdev->resource[1].start; - sandpoint_ide_ctl_regbase[1]=pdev->resource[3].start; - sandpoint_idedma_regbase=pdev->resource[4].start; - pci_dev_put(pdev); - } - - sandpoint_ide_ports_known = 1; -} - -static int -sandpoint_ide_default_irq(unsigned long base) -{ - if (sandpoint_ide_ports_known == 0) - sandpoint_ide_probe(); - - if (base == sandpoint_ide_regbase[0]) - return SANDPOINT_IDE_INT0; - else if (base == sandpoint_ide_regbase[1]) - return SANDPOINT_IDE_INT1; - else - return 0; -} - -static unsigned long -sandpoint_ide_default_io_base(int index) -{ - if (sandpoint_ide_ports_known == 0) - sandpoint_ide_probe(); - - return sandpoint_ide_regbase[index]; -} - -static void __init -sandpoint_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, - unsigned long ctrl_port, int *irq) -{ - unsigned long reg = data_port; - uint alt_status_base; - int i; - - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { - hw->io_ports[i] = reg++; - } - - if (data_port == sandpoint_ide_regbase[0]) { - alt_status_base = sandpoint_ide_ctl_regbase[0] + 2; - hw->irq = 14; - } - else if (data_port == sandpoint_ide_regbase[1]) { - alt_status_base = sandpoint_ide_ctl_regbase[1] + 2; - hw->irq = 15; - } - else { - alt_status_base = 0; - hw->irq = 0; - } - - if (ctrl_port) { - hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port; - } else { - hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base; - } - - if (irq != NULL) { - *irq = hw->irq; - } -} -#endif - /* * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1. */ @@ -736,10 +648,4 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #ifdef CONFIG_SERIAL_TEXT_DEBUG ppc_md.progress = gen550_progress; #endif - -#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) - ppc_ide_md.default_irq = sandpoint_ide_default_irq; - ppc_ide_md.default_io_base = sandpoint_ide_default_io_base; - ppc_ide_md.ide_init_hwif = sandpoint_ide_init_hwif_ports; -#endif } diff --git a/arch/ppc/platforms/sandpoint.h b/arch/ppc/platforms/sandpoint.h index 3b64e6418489..ed83759e4044 100644 --- a/arch/ppc/platforms/sandpoint.h +++ b/arch/ppc/platforms/sandpoint.h @@ -28,9 +28,6 @@ */ #define SANDPOINT_IDE_INT0 23 /* EPIC 7 */ #define SANDPOINT_IDE_INT1 24 /* EPIC 8 */ -#else -#define SANDPOINT_IDE_INT0 14 /* 8259 Test */ -#define SANDPOINT_IDE_INT1 15 /* 8259 Test */ #endif /* diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c index f4de50ba292e..a344134f14b8 100644 --- a/arch/ppc/platforms/spruce.c +++ b/arch/ppc/platforms/spruce.c @@ -22,7 +22,6 @@ #include <linux/console.h> #include <linux/delay.h> #include <linux/seq_file.h> -#include <linux/ide.h> #include <linux/root_dev.h> #include <linux/serial.h> #include <linux/tty.h> diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index 9caf850c9b38..19749e9bcf91 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -87,8 +87,6 @@ void m8xx_calibrate_decr(void); unsigned char __res[sizeof(bd_t)]; -extern void m8xx_ide_init(void); - extern unsigned long find_available_memory(void); extern void m8xx_cpm_reset(void); extern void m8xx_wdt_handler_install(bd_t *bp); @@ -474,8 +472,4 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, ppc_md.find_end_of_memory = m8xx_find_end_of_memory; ppc_md.setup_io_mappings = m8xx_map_io; - -#if defined(CONFIG_BLK_DEV_MPC8xx_IDE) - m8xx_ide_init(); -#endif } diff --git a/arch/ppc/syslib/ppc4xx_setup.c b/arch/ppc/syslib/ppc4xx_setup.c index debe14c083a1..353d746b47e1 100644 --- a/arch/ppc/syslib/ppc4xx_setup.c +++ b/arch/ppc/syslib/ppc4xx_setup.c @@ -24,7 +24,6 @@ #include <linux/pci.h> #include <linux/rtc.h> #include <linux/console.h> -#include <linux/ide.h> #include <linux/serial_reg.h> #include <linux/seq_file.h> @@ -189,24 +188,6 @@ ppc4xx_calibrate_decr(void) mtspr(SPRN_PIT, tb_ticks_per_jiffy); } -/* - * IDE stuff. - * should be generic for every IDE PCI chipset - */ -#if defined(CONFIG_PCI) && defined(CONFIG_IDE) -static void -ppc4xx_ide_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, - unsigned long ctrl_port, int *irq) -{ - int i; - - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; ++i) - hw->io_ports[i] = data_port + i - IDE_DATA_OFFSET; - - hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port; -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_IDE) */ - TODC_ALLOC(); /* @@ -271,10 +252,6 @@ ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5, #ifdef CONFIG_SERIAL_TEXT_DEBUG ppc_md.progress = gen550_progress; #endif - -#if defined(CONFIG_PCI) && defined(CONFIG_IDE) - ppc_ide_md.ide_init_hwif = ppc4xx_ide_init_hwif_ports; -#endif /* defined(CONFIG_PCI) && defined(CONFIG_IDE) */ } /* Called from machine_check_exception */ diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c index b73373216b0e..c70d0b6f666f 100644 --- a/block/compat_ioctl.c +++ b/block/compat_ioctl.c @@ -624,7 +624,6 @@ static int compat_blkdev_driver_ioctl(struct inode *inode, struct file *file, case HDIO_GET_IDENTITY: case HDIO_DRIVE_TASK: case HDIO_DRIVE_CMD: - case HDIO_SCAN_HWIF: /* 0x330 is reserved -- it used to be HDIO_GETGEO_BIG */ case 0x330: /* 0x02 -- Floppy ioctls */ diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index ac5875783430..87532034d105 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -122,24 +122,6 @@ config BLK_DEV_IDE_SATA If unsure, say N. -config BLK_DEV_HD_IDE - bool "Use old disk-only driver on primary interface" - depends on (X86 || SH_MPC1211) - ---help--- - There are two drivers for MFM/RLL/IDE disks. Most people use just - the new enhanced driver by itself. This option however installs the - old hard disk driver to control the primary IDE/disk interface in - the system, leaving the new enhanced IDE driver to take care of only - the 2nd/3rd/4th IDE interfaces. Doing this will prevent you from - having an IDE/ATAPI CD-ROM or tape drive connected to the primary - IDE interface. Choosing this option may be useful for older systems - which have MFM/RLL/ESDI controller+drives at the primary port - address (0x1f0), along with IDE drives at the secondary/3rd/4th port - addresses. - - Normally, just say N here; you will then use the new driver for all - 4 interfaces. - config BLK_DEV_IDEDISK tristate "Include IDE/ATA-2 DISK support" ---help--- @@ -325,6 +307,7 @@ comment "IDE chipset support/bugfixes" config IDE_GENERIC tristate "generic/default IDE chipset support" + depends on ALPHA || X86 || IA64 || M32R || MIPS || PPC32 help If unsure, say N. @@ -1042,7 +1025,7 @@ config IDE_EXT_DIRECT endchoice # no isa -> no vlb -if ISA +if ISA && (ALPHA || X86 || MIPS) comment "Other IDE chipsets support" comment "Note: most of these also require special kernel boot parameters" @@ -1053,8 +1036,8 @@ config BLK_DEV_4DRIVES Certain older chipsets, including the Tekram 690CD, use a single set of I/O ports at 0x1f0 to control up to four drives, instead of the customary two drives per port. Support for this can be enabled at - runtime using the "ide0=four" kernel boot parameter if you say Y - here. + runtime using the "ide-4drives.probe" kernel boot parameter if you + say Y here. config BLK_DEV_ALI14XX tristate "ALI M14xx support" @@ -1107,14 +1090,10 @@ config BLK_DEV_IDEDMA def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \ BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA -config IDE_ARCH_OBSOLETE_INIT - def_bool ALPHA || (ARM && !ARCH_L7200) || BLACKFIN || X86 || IA64 || M32R || MIPS || PARISC || PPC || (SUPERH64 && BLK_DEV_IDEPCI) || SPARC - endif config BLK_DEV_HD_ONLY bool "Old hard disk (MFM/RLL/IDE) driver" - depends on BLK_DEV_IDE=n help There are two drivers for MFM/RLL/IDE hard disks. Most people use the newer enhanced driver, but this old one is still around for two @@ -1126,12 +1105,16 @@ config BLK_DEV_HD_ONLY for systems with only older MFM/RLL/ESDI drives. Choosing the old driver can save 13 KB or so of kernel memory. + If you want to use this driver together with the new one you have + to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new + driver from probing the primary interface. + If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver instead of this one. For more detailed information, read the Disk-HOWTO, available from <http://www.tldp.org/docs.html#howto>. config BLK_DEV_HD - def_bool BLK_DEV_HD_IDE || BLK_DEV_HD_ONLY + def_bool BLK_DEV_HD_ONLY endif # IDE diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index a4a4323be911..571544c37bb2 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -36,9 +36,9 @@ ifeq ($(CONFIG_BLK_DEV_CMD640), y) endif obj-$(CONFIG_BLK_DEV_IDE) += cris/ ppc/ -obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o obj-$(CONFIG_IDE_H8300) += h8300/ obj-$(CONFIG_IDE_GENERIC) += ide-generic.o +obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c index 161d30c8481e..a63f9539bc41 100644 --- a/drivers/ide/arm/bast-ide.c +++ b/drivers/ide/arm/bast-ide.c @@ -21,6 +21,8 @@ #include <asm/arch/bast-map.h> #include <asm/arch/bast-irq.h> +#define DRV_NAME "bast-ide" + static int __init bastide_register(unsigned int base, unsigned int aux, int irq) { ide_hwif_t *hwif; @@ -41,19 +43,14 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq) hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20); hw.irq = irq; - hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif == NULL) goto out; i = hwif->index; - if (hwif->present) - ide_unregister(i, 0, 0); - else if (!hwif->hold) - ide_init_port_data(hwif, i); - ide_init_port_hw(hwif, &hw); - hwif->quirkproc = NULL; + hwif->port_ops = NULL; idx[0] = i; @@ -64,6 +61,8 @@ out: static int __init bastide_init(void) { + unsigned long base = BAST_VA_IDEPRI + BAST_IDE_CS; + /* we can treat the VR1000 and the BAST the same */ if (!(machine_is_bast() || machine_is_vr1000())) @@ -71,6 +70,11 @@ static int __init bastide_init(void) printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n"); + if (!request_mem_region(base, 0x400000, DRV_NAME)) { + printk(KERN_ERR "%s: resources busy\n", DRV_NAME); + return -EBUSY; + } + bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0); bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1); diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index e816b0ffcfe6..3ccf142c4122 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -191,6 +191,10 @@ static void icside_maskproc(ide_drive_t *drive, int mask) local_irq_restore(flags); } +static const struct ide_port_ops icside_v6_no_dma_port_ops = { + .maskproc = icside_maskproc, +}; + #ifdef CONFIG_BLK_DEV_IDEDMA_ICS /* * SG-DMA support. @@ -266,6 +270,11 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data); } +static const struct ide_port_ops icside_v6_port_ops = { + .set_dma_mode = icside_set_dma_mode, + .maskproc = icside_maskproc, +}; + static void icside_dma_host_set(ide_drive_t *drive, int on) { } @@ -375,32 +384,40 @@ static void icside_dma_lost_irq(ide_drive_t *drive) printk(KERN_ERR "%s: IRQ lost\n", drive->name); } -static void icside_dma_init(ide_hwif_t *hwif) +static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d) { hwif->dmatable_cpu = NULL; hwif->dmatable_dma = 0; - hwif->set_dma_mode = icside_set_dma_mode; - - hwif->dma_host_set = icside_dma_host_set; - hwif->dma_setup = icside_dma_setup; - hwif->dma_exec_cmd = icside_dma_exec_cmd; - hwif->dma_start = icside_dma_start; - hwif->ide_dma_end = icside_dma_end; - hwif->ide_dma_test_irq = icside_dma_test_irq; - hwif->dma_timeout = icside_dma_timeout; - hwif->dma_lost_irq = icside_dma_lost_irq; + + return 0; } + +static const struct ide_dma_ops icside_v6_dma_ops = { + .dma_host_set = icside_dma_host_set, + .dma_setup = icside_dma_setup, + .dma_exec_cmd = icside_dma_exec_cmd, + .dma_start = icside_dma_start, + .dma_end = icside_dma_end, + .dma_test_irq = icside_dma_test_irq, + .dma_timeout = icside_dma_timeout, + .dma_lost_irq = icside_dma_lost_irq, +}; #else -#define icside_dma_init(hwif) (0) +#define icside_v6_dma_ops NULL #endif +static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d) +{ + return -EOPNOTSUPP; +} + static ide_hwif_t * icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *ec) { unsigned long port = (unsigned long)base + info->dataoffset; ide_hwif_t *hwif; - hwif = ide_find_port(port); + hwif = ide_find_port(); if (hwif) { int i; @@ -408,7 +425,6 @@ icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *e * Ensure we're using MMIO */ default_hwif_mmiops(hwif); - hwif->mmio = 1; for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { hwif->io_ports[i] = port; @@ -416,7 +432,6 @@ icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *e } hwif->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)base + info->ctrloffset; hwif->irq = ec->irq; - hwif->noprobe = 0; hwif->chipset = ide_acorn; hwif->gendev.parent = &ec->dev; hwif->dev = &ec->dev; @@ -462,9 +477,10 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) } static const struct ide_port_info icside_v6_port_info __initdata = { - .host_flags = IDE_HFLAG_SERIALIZE | - IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ - IDE_HFLAG_NO_AUTOTUNE, + .init_dma = icside_dma_off_init, + .port_ops = &icside_v6_no_dma_port_ops, + .dma_ops = &icside_v6_dma_ops, + .host_flags = IDE_HFLAG_SERIALIZE, .mwdma_mask = ATA_MWDMA2, .swdma_mask = ATA_SWDMA2, }; @@ -526,7 +542,6 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) state->hwif[0] = hwif; state->hwif[1] = mate; - hwif->maskproc = icside_maskproc; hwif->hwif_data = state; hwif->config_data = (unsigned long)ioc_base; hwif->select_data = sel; @@ -537,10 +552,10 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) mate->select_data = sel | 1; if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) { - icside_dma_init(hwif); - icside_dma_init(mate); - } else - d.mwdma_mask = d.swdma_mask = 0; + d.init_dma = icside_dma_init; + d.port_ops = &icside_v6_dma_port_ops; + d.dma_ops = NULL; + } idx[0] = hwif->index; idx[1] = mate->index; diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c index 43a70e91363e..44a0ee52d982 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c @@ -14,6 +14,8 @@ #include <asm/mach-types.h> #include <asm/irq.h> +#define DRV_NAME "ide_arm" + #ifdef CONFIG_ARCH_CLPS7500 # include <asm/arch/hardware.h> # @@ -28,13 +30,27 @@ static int __init ide_arm_init(void) { ide_hwif_t *hwif; hw_regs_t hw; + unsigned long base = IDE_ARM_IO, ctl = IDE_ARM_IO + 0x206; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + if (!request_region(base, 8, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", + DRV_NAME, base, base + 7); + return -EBUSY; + } + + if (!request_region(ctl, 1, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", + DRV_NAME, ctl); + release_region(base, 8); + return -EBUSY; + } + memset(&hw, 0, sizeof(hw)); - ide_std_init_ports(&hw, IDE_ARM_IO, IDE_ARM_IO + 0x206); + ide_std_init_ports(&hw, base, ctl); hw.irq = IDE_ARM_IRQ; - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif) { ide_init_port_hw(hwif, &hw); idx[0] = hwif->index; diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 8e1f6bd33887..d1c9c4f8a1a8 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -96,11 +96,11 @@ static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, u16 val16; /* DMA Data Setup */ - t0 = (palm_bk3710_udmatimings[mode].cycletime + ide_palm_clk - 1) - / ide_palm_clk - 1; - tenv = (20 + ide_palm_clk - 1) / ide_palm_clk - 1; - trp = (palm_bk3710_udmatimings[mode].rptime + ide_palm_clk - 1) - / ide_palm_clk - 1; + t0 = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].cycletime, + ide_palm_clk) - 1; + tenv = DIV_ROUND_UP(20, ide_palm_clk) - 1; + trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime, + ide_palm_clk) - 1; /* udmatim Register */ val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0); @@ -141,8 +141,8 @@ static void palm_bk3710_setdmamode(void __iomem *base, unsigned int dev, cycletime = max_t(int, t->cycle, min_cycle); /* DMA Data Setup */ - t0 = (cycletime + ide_palm_clk - 1) / ide_palm_clk; - td = (t->active + ide_palm_clk - 1) / ide_palm_clk; + t0 = DIV_ROUND_UP(cycletime, ide_palm_clk); + td = DIV_ROUND_UP(t->active, ide_palm_clk); tkw = t0 - td - 1; td -= 1; @@ -168,9 +168,9 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, struct ide_timing *t; /* PIO Data Setup */ - t0 = (cycletime + ide_palm_clk - 1) / ide_palm_clk; - t2 = (ide_timing_find_mode(XFER_PIO_0 + mode)->active + - ide_palm_clk - 1) / ide_palm_clk; + t0 = DIV_ROUND_UP(cycletime, ide_palm_clk); + t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active, + ide_palm_clk); t2i = t0 - t2 - 1; t2 -= 1; @@ -192,8 +192,8 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, /* TASKFILE Setup */ t = ide_timing_find_mode(XFER_PIO_0 + mode); - t0 = (t->cyc8b + ide_palm_clk - 1) / ide_palm_clk; - t2 = (t->act8b + ide_palm_clk - 1) / ide_palm_clk; + t0 = DIV_ROUND_UP(t->cyc8b, ide_palm_clk); + t2 = DIV_ROUND_UP(t->act8b, ide_palm_clk); t2i = t0 - t2 - 1; t2 -= 1; @@ -317,17 +317,31 @@ static u8 __devinit palm_bk3710_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA80; } -static void __devinit palm_bk3710_init_hwif(ide_hwif_t *hwif) +static int __devinit palm_bk3710_init_dma(ide_hwif_t *hwif, + const struct ide_port_info *d) { - hwif->set_pio_mode = palm_bk3710_set_pio_mode; - hwif->set_dma_mode = palm_bk3710_set_dma_mode; + unsigned long base = + hwif->io_ports[IDE_DATA_OFFSET] - IDE_PALM_ATA_PRI_REG_OFFSET; - hwif->cable_detect = palm_bk3710_cable_detect; + printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); + + if (ide_allocate_dma_engine(hwif)) + return -1; + + ide_setup_dma(hwif, base); + + return 0; } +static const struct ide_port_ops palm_bk3710_ports_ops = { + .set_pio_mode = palm_bk3710_set_pio_mode, + .set_dma_mode = palm_bk3710_set_dma_mode, + .cable_detect = palm_bk3710_cable_detect, +}; + static const struct ide_port_info __devinitdata palm_bk3710_port_info = { - .init_hwif = palm_bk3710_init_hwif, - .host_flags = IDE_HFLAG_NO_DMA, /* hack (no PCI) */ + .init_dma = palm_bk3710_init_dma, + .port_ops = &palm_bk3710_ports_ops, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA4, /* (input clk 99MHz) */ .mwdma_mask = ATA_MWDMA2, @@ -378,24 +392,17 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) hw.irq = irq->start; hw.chipset = ide_palm3710; - hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif == NULL) goto out; i = hwif->index; - if (hwif->present) - ide_unregister(i, 0, 0); - else if (!hwif->hold) - ide_init_port_data(hwif, i); - ide_init_port_hw(hwif, &hw); hwif->mmio = 1; default_hwif_mmiops(hwif); - ide_setup_dma(hwif, mem->start); - idx[0] = i; ide_device_add(idx, &palm_bk3710_port_info); diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index efba00d2fc37..3d30d4b5f9e3 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -44,7 +44,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) goto release; } - hwif = ide_find_port((unsigned long)base); + hwif = ide_find_port(); if (hwif) { memset(&hw, 0, sizeof(hw)); rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq); @@ -53,7 +53,6 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; default_hwif_mmiops(hwif); idx[0] = hwif->index; @@ -76,7 +75,7 @@ static void __devexit rapide_remove(struct expansion_card *ec) ecard_set_drvdata(ec, NULL); - ide_unregister(hwif->index, 0, 0); + ide_unregister(hwif); ecard_release_resources(ec); } diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index e79bf8f9b7db..f40303984139 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -228,7 +228,10 @@ cris_ide_fill_descriptor(cris_dma_descr_type *d, void* buf, unsigned int len, in static void cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int dir,int type,int len) { - reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, IDE_DATA_REG); + ide_hwif_t *hwif = drive->hwif; + + reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, + hwif->io_ports[IDE_DATA_OFFSET]); reg_ata_rw_trf_cnt trf_cnt = {0}; mycontext.saved_data = (dma_descr_data*)virt_to_phys(d); @@ -264,8 +267,12 @@ cris_ide_wait_dma(int dir) static int cris_dma_test_irq(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; int intr = REG_RD_INT(ata, regi_ata, r_intr); - reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, IDE_DATA_REG); + + reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, + hwif->io_ports[IDE_DATA_OFFSET]); + return intr & (1 << ctrl2.sel) ? 1 : 0; } @@ -523,7 +530,8 @@ static void cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int d IO_STATE(R_ATA_CTRL_DATA, handsh, dma); *R_ATA_CTRL_DATA = cmd | - IO_FIELD(R_ATA_CTRL_DATA, data, IDE_DATA_REG) | + IO_FIELD(R_ATA_CTRL_DATA, data, + drive->hwif->io_ports[IDE_DATA_OFFSET]) | IO_STATE(R_ATA_CTRL_DATA, src_dst, dma) | IO_STATE(R_ATA_CTRL_DATA, multi, on) | IO_STATE(R_ATA_CTRL_DATA, dma_size, word); @@ -541,7 +549,9 @@ cris_ide_wait_dma(int dir) static int cris_dma_test_irq(ide_drive_t *drive) { int intr = *R_IRQ_MASK0_RD; - int bus = IO_EXTRACT(R_ATA_CTRL_DATA, sel, IDE_DATA_REG); + int bus = IO_EXTRACT(R_ATA_CTRL_DATA, sel, + drive->hwif->io_ports[IDE_DATA_OFFSET]); + return intr & (1 << (bus + IO_BITNR(R_IRQ_MASK0_RD, ata_irq0))) ? 1 : 0; } @@ -663,11 +673,6 @@ cris_ide_inb(unsigned long reg) return (unsigned char)cris_ide_inw(reg); } -static int cris_dma_end (ide_drive_t *drive); -static int cris_dma_setup (ide_drive_t *drive); -static void cris_dma_exec_cmd (ide_drive_t *drive, u8 command); -static int cris_dma_test_irq(ide_drive_t *drive); -static void cris_dma_start(ide_drive_t *drive); static void cris_ide_input_data (ide_drive_t *drive, void *, unsigned int); static void cris_ide_output_data (ide_drive_t *drive, void *, unsigned int); static void cris_atapi_input_bytes(ide_drive_t *drive, void *, unsigned int); @@ -772,8 +777,17 @@ static void __init cris_setup_ports(hw_regs_t *hw, unsigned long base) hw->ack_intr = cris_ide_ack_intr; } +static const struct ide_port_ops cris_port_ops = { + .set_pio_mode = cris_set_pio_mode, + .set_dma_mode = cris_set_dma_mode, +}; + +static const struct ide_dma_ops cris_dma_ops; + static const struct ide_port_info cris_port_info __initdata = { .chipset = ide_etrax100, + .port_ops = &cris_port_ops, + .dma_ops = &cris_dma_ops, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_DMA, /* no SFF-style DMA */ .pio_mask = ATA_PIO4, @@ -794,24 +808,16 @@ static int __init init_e100_ide(void) cris_setup_ports(&hw, cris_ide_base_address(h)); - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif == NULL) continue; - ide_init_port_data(hwif, hwif->index); + ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; - hwif->set_pio_mode = &cris_set_pio_mode; - hwif->set_dma_mode = &cris_set_dma_mode; + hwif->ata_input_data = &cris_ide_input_data; hwif->ata_output_data = &cris_ide_output_data; hwif->atapi_input_bytes = &cris_atapi_input_bytes; hwif->atapi_output_bytes = &cris_atapi_output_bytes; - hwif->dma_host_set = &cris_dma_host_set; - hwif->ide_dma_end = &cris_dma_end; - hwif->dma_setup = &cris_dma_setup; - hwif->dma_exec_cmd = &cris_dma_exec_cmd; - hwif->ide_dma_test_irq = &cris_dma_test_irq; - hwif->dma_start = &cris_dma_start; hwif->OUTB = &cris_ide_outb; hwif->OUTW = &cris_ide_outw; hwif->OUTBSYNC = &cris_ide_outbsync; @@ -1066,4 +1072,13 @@ static void cris_dma_start(ide_drive_t *drive) } } +static const struct ide_dma_ops cris_dma_ops = { + .dma_host_set = cris_dma_host_set, + .dma_setup = cris_dma_setup, + .dma_exec_cmd = cris_dma_exec_cmd, + .dma_start = cris_dma_start, + .dma_end = cris_dma_end, + .dma_test_irq = cris_dma_test_irq, +}; + module_init(init_e100_ide); diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index 520aec075700..1a90336bbebd 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -74,7 +74,6 @@ static inline void hwif_setup(ide_hwif_t *hwif) { default_hwif_iops(hwif); - hwif->mmio = 1; hwif->OUTW = mm_outw; hwif->OUTSW = mm_outsw; hwif->INW = mm_inw; @@ -99,15 +98,13 @@ static int __init h8300_ide_init(void) hw_setup(&hw); - /* register if */ - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif == NULL) { printk(KERN_ERR "ide-h8300: IDE I/F register failed\n"); return -ENOENT; } index = hwif->index; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); hwif_setup(hwif); printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", index); diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index e07b189f3ec8..6f704628c27d 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -55,14 +55,22 @@ struct ide_acpi_hwif_link { /* note: adds function name and KERN_DEBUG */ #ifdef DEBUGGING #define DEBPRINT(fmt, args...) \ - printk(KERN_DEBUG "%s: " fmt, __FUNCTION__, ## args) + printk(KERN_DEBUG "%s: " fmt, __func__, ## args) #else #define DEBPRINT(fmt, args...) do {} while (0) #endif /* DEBUGGING */ -extern int ide_noacpi; -extern int ide_noacpitfs; -extern int ide_noacpionboot; +static int ide_noacpi; +module_param_named(noacpi, ide_noacpi, bool, 0); +MODULE_PARM_DESC(noacpi, "disable IDE ACPI support"); + +static int ide_acpigtf; +module_param_named(acpigtf, ide_acpigtf, bool, 0); +MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support"); + +static int ide_acpionboot; +module_param_named(acpionboot, ide_acpionboot, bool, 0); +MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot"); static bool ide_noacpi_psx; static int no_acpi_psx(const struct dmi_system_id *id) @@ -309,7 +317,7 @@ static int do_drive_get_GTF(ide_drive_t *drive, if (ACPI_FAILURE(status)) { printk(KERN_DEBUG "%s: Run _GTF error: status = 0x%x\n", - __FUNCTION__, status); + __func__, status); goto out; } @@ -335,7 +343,7 @@ static int do_drive_get_GTF(ide_drive_t *drive, out_obj->buffer.length % REGS_PER_GTF) { printk(KERN_ERR "%s: unexpected GTF length (%d) or addr (0x%p)\n", - __FUNCTION__, out_obj->buffer.length, + __func__, out_obj->buffer.length, out_obj->buffer.pointer); err = -ENOENT; kfree(output.pointer); @@ -376,7 +384,7 @@ static int taskfile_load_raw(ide_drive_t *drive, memcpy(&args.tf_array[7], >f->tfa, 7); args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; - if (ide_noacpitfs) { + if (!ide_acpigtf) { DEBPRINT("_GTF execution disabled\n"); return err; } @@ -384,7 +392,7 @@ static int taskfile_load_raw(ide_drive_t *drive, err = ide_no_data_taskfile(drive, &args); if (err) printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n", - __FUNCTION__, err); + __func__, err); return err; } @@ -422,7 +430,7 @@ static int do_drive_set_taskfiles(ide_drive_t *drive, if (gtf_length % REGS_PER_GTF) { printk(KERN_ERR "%s: unexpected GTF length (%d)\n", - __FUNCTION__, gtf_length); + __func__, gtf_length); goto out; } @@ -547,7 +555,7 @@ void ide_acpi_get_timing(ide_hwif_t *hwif) printk(KERN_ERR "%s: unexpected _GTM length (0x%x)[should be 0x%zx] or " "addr (0x%p)\n", - __FUNCTION__, out_obj->buffer.length, + __func__, out_obj->buffer.length, sizeof(struct GTM_buffer), out_obj->buffer.pointer); return; } @@ -710,6 +718,8 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif) for (i = 0; i < MAX_DRIVES; i++) { drive = &hwif->drives[i]; + memset(drive->acpidata, 0, sizeof(*drive->acpidata)); + if (!drive->present) continue; @@ -719,7 +729,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif) drive->name, err); } - if (ide_noacpionboot) { + if (!ide_acpionboot) { DEBPRINT("ACPI methods disabled on boot\n"); return; } diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index c8d0e8715997..b452335cb5ab 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -13,8 +13,8 @@ * * Suggestions are welcome. Patches that work are more welcome though. ;-) * For those wishing to work on this driver, please be sure you download - * and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI - * (SFF-8020i rev 2.6) standards. These documents can be obtained by + * and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI + * (SFF-8020i rev 2.6) standards. These documents can be obtained by * anonymous ftp from: * ftp://fission.dt.wdc.com/pub/standards/SFF_atapi/spec/SFF8020-r2.6/PS/8020r26.ps * ftp://ftp.avc-pioneer.com/Mtfuji4/Spec/Fuji4r10.pdf @@ -39,19 +39,20 @@ #include <linux/mutex.h> #include <linux/bcd.h> -#include <scsi/scsi.h> /* For SCSI -> ATAPI command conversion */ +/* For SCSI -> ATAPI command conversion */ +#include <scsi/scsi.h> -#include <asm/irq.h> -#include <asm/io.h> +#include <linux/irq.h> +#include <linux/io.h> #include <asm/byteorder.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <asm/unaligned.h> #include "ide-cd.h" static DEFINE_MUTEX(idecd_ref_mutex); -#define to_ide_cd(obj) container_of(obj, struct cdrom_info, kref) +#define to_ide_cd(obj) container_of(obj, struct cdrom_info, kref) #define ide_cd_g(disk) \ container_of((disk)->private_data, struct cdrom_info, driver) @@ -77,19 +78,17 @@ static void ide_cd_put(struct cdrom_info *cd) mutex_unlock(&idecd_ref_mutex); } -/**************************************************************************** +/* * Generic packet command support and error handling routines. */ -/* Mark that we've seen a media change, and invalidate our internal - buffers. */ -static void cdrom_saw_media_change (ide_drive_t *drive) +/* Mark that we've seen a media change and invalidate our internal buffers. */ +static void cdrom_saw_media_change(ide_drive_t *drive) { struct cdrom_info *cd = drive->driver_data; cd->cd_flags |= IDE_CD_FLAG_MEDIA_CHANGED; cd->cd_flags &= ~IDE_CD_FLAG_TOC_VALID; - cd->nsectors_buffered = 0; } static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, @@ -101,44 +100,43 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq, return 0; switch (sense->sense_key) { - case NO_SENSE: case RECOVERED_ERROR: - break; - case NOT_READY: - /* - * don't care about tray state messages for - * e.g. capacity commands or in-progress or - * becoming ready - */ - if (sense->asc == 0x3a || sense->asc == 0x04) - break; - log = 1; - break; - case ILLEGAL_REQUEST: - /* - * don't log START_STOP unit with LoEj set, since - * we cannot reliably check if drive can auto-close - */ - if (rq->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24) - break; - log = 1; - break; - case UNIT_ATTENTION: - /* - * Make good and sure we've seen this potential media - * change. Some drives (i.e. Creative) fail to present - * the correct sense key in the error register. - */ - cdrom_saw_media_change(drive); + case NO_SENSE: + case RECOVERED_ERROR: + break; + case NOT_READY: + /* + * don't care about tray state messages for e.g. capacity + * commands or in-progress or becoming ready + */ + if (sense->asc == 0x3a || sense->asc == 0x04) break; - default: - log = 1; + log = 1; + break; + case ILLEGAL_REQUEST: + /* + * don't log START_STOP unit with LoEj set, since we cannot + * reliably check if drive can auto-close + */ + if (rq->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24) break; + log = 1; + break; + case UNIT_ATTENTION: + /* + * Make good and sure we've seen this potential media change. + * Some drives (i.e. Creative) fail to present the correct sense + * key in the error register. + */ + cdrom_saw_media_change(drive); + break; + default: + log = 1; + break; } return log; } -static -void cdrom_analyze_sense_data(ide_drive_t *drive, +static void cdrom_analyze_sense_data(ide_drive_t *drive, struct request *failed_command, struct request_sense *sense) { @@ -151,16 +149,17 @@ void cdrom_analyze_sense_data(ide_drive_t *drive, return; /* - * If a read toc is executed for a CD-R or CD-RW medium where - * the first toc has not been recorded yet, it will fail with - * 05/24/00 (which is a confusing error) + * If a read toc is executed for a CD-R or CD-RW medium where the first + * toc has not been recorded yet, it will fail with 05/24/00 (which is a + * confusing error) */ if (failed_command && failed_command->cmd[0] == GPCMD_READ_TOC_PMA_ATIP) if (sense->sense_key == 0x05 && sense->asc == 0x24) return; - if (sense->error_code == 0x70) { /* Current Error */ - switch(sense->sense_key) { + /* current error */ + if (sense->error_code == 0x70) { + switch (sense->sense_key) { case MEDIUM_ERROR: case VOLUME_OVERFLOW: case ILLEGAL_REQUEST: @@ -178,25 +177,23 @@ void cdrom_analyze_sense_data(ide_drive_t *drive, if (bio_sectors < 4) bio_sectors = 4; if (drive->queue->hardsect_size == 2048) - sector <<= 2; /* Device sector size is 2K */ - sector &= ~(bio_sectors -1); + /* device sector size is 2K */ + sector <<= 2; + sector &= ~(bio_sectors - 1); valid = (sector - failed_command->sector) << 9; if (valid < 0) valid = 0; if (sector < get_capacity(info->disk) && - drive->probed_capacity - sector < 4 * 75) { + drive->probed_capacity - sector < 4 * 75) set_capacity(info->disk, sector); - } - } - } + } + } ide_cd_log_error(drive->name, failed_command, sense); } -/* - * Initialize a ide-cd packet command request - */ +/* Initialize a ide-cd packet command request */ void ide_cd_init_rq(ide_drive_t *drive, struct request *rq) { struct cdrom_info *cd = drive->driver_data; @@ -220,7 +217,8 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, rq->data = sense; rq->cmd[0] = GPCMD_REQUEST_SENSE; - rq->cmd[4] = rq->data_len = 18; + rq->cmd[4] = 18; + rq->data_len = 18; rq->cmd_type = REQ_TYPE_SENSE; @@ -230,7 +228,7 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, (void) ide_do_drive_cmd(drive, rq, ide_preempt); } -static void cdrom_end_request (ide_drive_t *drive, int uptodate) +static void cdrom_end_request(ide_drive_t *drive, int uptodate) { struct request *rq = HWGROUP(drive)->rq; int nsectors = rq->hard_cur_sectors; @@ -252,7 +250,7 @@ static void cdrom_end_request (ide_drive_t *drive, int uptodate) } cdrom_analyze_sense_data(drive, failed, sense); /* - * now end failed request + * now end the failed request */ if (blk_fs_request(failed)) { if (ide_end_dequeued_request(drive, failed, 0, @@ -280,21 +278,24 @@ static void cdrom_end_request (ide_drive_t *drive, int uptodate) ide_end_request(drive, uptodate, nsectors); } -static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 stat) +static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 st) { - if (stat & 0x80) + if (st & 0x80) return; - ide_dump_status(drive, msg, stat); + ide_dump_status(drive, msg, st); } -/* Returns 0 if the request should be continued. - Returns 1 if the request was ended. */ +/* + * Returns: + * 0: if the request should be continued. + * 1: if the request was ended. + */ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) { struct request *rq = HWGROUP(drive)->rq; int stat, err, sense_key; - - /* Check for errors. */ + + /* check for errors */ stat = ide_read_status(drive); if (stat_ret) @@ -303,20 +304,22 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) if (OK_STAT(stat, good_stat, BAD_R_STAT)) return 0; - /* Get the IDE error register. */ + /* get the IDE error register */ err = ide_read_error(drive); sense_key = err >> 4; if (rq == NULL) { - printk("%s: missing rq in cdrom_decode_status\n", drive->name); + printk(KERN_ERR "%s: missing rq in %s\n", + drive->name, __func__); return 1; } if (blk_sense_request(rq)) { - /* We got an error trying to get sense info - from the drive (probably while trying - to recover from a former error). Just give up. */ - + /* + * We got an error trying to get sense info from the drive + * (probably while trying to recover from a former error). + * Just give up. + */ rq->cmd_flags |= REQ_FAILED; cdrom_end_request(drive, 0); ide_error(drive, "request sense failure", stat); @@ -332,28 +335,27 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) if (blk_pc_request(rq) && !rq->errors) rq->errors = SAM_STAT_CHECK_CONDITION; - /* Check for tray open. */ + /* check for tray open */ if (sense_key == NOT_READY) { - cdrom_saw_media_change (drive); + cdrom_saw_media_change(drive); } else if (sense_key == UNIT_ATTENTION) { - /* Check for media change. */ - cdrom_saw_media_change (drive); - /*printk("%s: media changed\n",drive->name);*/ + /* check for media change */ + cdrom_saw_media_change(drive); return 0; - } else if ((sense_key == ILLEGAL_REQUEST) && - (rq->cmd[0] == GPCMD_START_STOP_UNIT)) { - /* - * Don't print error message for this condition-- - * SFF8090i indicates that 5/24/00 is the correct - * response to a request to close the tray if the - * drive doesn't have that capability. - * cdrom_log_sense() knows this! - */ + } else if (sense_key == ILLEGAL_REQUEST && + rq->cmd[0] == GPCMD_START_STOP_UNIT) { + /* + * Don't print error message for this condition-- + * SFF8090i indicates that 5/24/00 is the correct + * response to a request to close the tray if the + * drive doesn't have that capability. + * cdrom_log_sense() knows this! + */ } else if (!(rq->cmd_flags & REQ_QUIET)) { - /* Otherwise, print an error. */ + /* otherwise, print an error */ ide_dump_status(drive, "packet command error", stat); } - + rq->cmd_flags |= REQ_FAILED; /* @@ -366,27 +368,30 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) } else if (blk_fs_request(rq)) { int do_end_request = 0; - /* Handle errors from READ and WRITE requests. */ + /* handle errors from READ and WRITE requests */ if (blk_noretry_request(rq)) do_end_request = 1; if (sense_key == NOT_READY) { - /* Tray open. */ + /* tray open */ if (rq_data_dir(rq) == READ) { - cdrom_saw_media_change (drive); + cdrom_saw_media_change(drive); - /* Fail the request. */ - printk ("%s: tray open\n", drive->name); + /* fail the request */ + printk(KERN_ERR "%s: tray open\n", drive->name); do_end_request = 1; } else { struct cdrom_info *info = drive->driver_data; - /* allow the drive 5 seconds to recover, some + /* + * Allow the drive 5 seconds to recover, some * devices will return this error while flushing - * data from cache */ + * data from cache. + */ if (!rq->errors) - info->write_timeout = jiffies + ATAPI_WAIT_WRITE_BUSY; + info->write_timeout = jiffies + + ATAPI_WAIT_WRITE_BUSY; rq->errors = 1; if (time_after(jiffies, info->write_timeout)) do_end_request = 1; @@ -394,59 +399,68 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) unsigned long flags; /* - * take a breather relying on the - * unplug timer to kick us again + * take a breather relying on the unplug + * timer to kick us again */ spin_lock_irqsave(&ide_lock, flags); blk_plug_device(drive->queue); - spin_unlock_irqrestore(&ide_lock,flags); + spin_unlock_irqrestore(&ide_lock, + flags); return 1; } } } else if (sense_key == UNIT_ATTENTION) { - /* Media change. */ - cdrom_saw_media_change (drive); + /* media change */ + cdrom_saw_media_change(drive); - /* Arrange to retry the request. - But be sure to give up if we've retried - too many times. */ + /* + * Arrange to retry the request but be sure to give up + * if we've retried too many times. + */ if (++rq->errors > ERROR_MAX) do_end_request = 1; } else if (sense_key == ILLEGAL_REQUEST || sense_key == DATA_PROTECT) { - /* No point in retrying after an illegal - request or data protect error.*/ - ide_dump_status_no_sense (drive, "command error", stat); + /* + * No point in retrying after an illegal request or data + * protect error. + */ + ide_dump_status_no_sense(drive, "command error", stat); do_end_request = 1; } else if (sense_key == MEDIUM_ERROR) { - /* No point in re-trying a zillion times on a bad - * sector... If we got here the error is not correctable */ - ide_dump_status_no_sense (drive, "media error (bad sector)", stat); + /* + * No point in re-trying a zillion times on a bad + * sector. If we got here the error is not correctable. + */ + ide_dump_status_no_sense(drive, + "media error (bad sector)", + stat); do_end_request = 1; } else if (sense_key == BLANK_CHECK) { - /* Disk appears blank ?? */ - ide_dump_status_no_sense (drive, "media error (blank)", stat); + /* disk appears blank ?? */ + ide_dump_status_no_sense(drive, "media error (blank)", + stat); do_end_request = 1; } else if ((err & ~ABRT_ERR) != 0) { - /* Go to the default handler - for other errors. */ + /* go to the default handler for other errors */ ide_error(drive, "cdrom_decode_status", stat); return 1; } else if ((++rq->errors > ERROR_MAX)) { - /* We've racked up too many retries. Abort. */ + /* we've racked up too many retries, abort */ do_end_request = 1; } - /* End a request through request sense analysis when we have - sense data. We need this in order to perform end of media - processing */ - + /* + * End a request through request sense analysis when we have + * sense data. We need this in order to perform end of media + * processing. + */ if (do_end_request) goto end_request; /* - * If we got a CHECK_CONDITION status, - * queue a request sense command. + * If we got a CHECK_CONDITION status, queue + * a request sense command. */ if (stat & ERR_STAT) cdrom_queue_request_sense(drive, NULL, NULL); @@ -455,7 +469,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) cdrom_end_request(drive, 0); } - /* Retry, or handle the next request. */ + /* retry, or handle the next request */ return 1; end_request: @@ -480,35 +494,37 @@ static int cdrom_timer_expiry(ide_drive_t *drive) unsigned long wait = 0; /* - * Some commands are *slow* and normally take a long time to - * complete. Usually we can use the ATAPI "disconnect" to bypass - * this, but not all commands/drives support that. Let - * ide_timer_expiry keep polling us for these. + * Some commands are *slow* and normally take a long time to complete. + * Usually we can use the ATAPI "disconnect" to bypass this, but not all + * commands/drives support that. Let ide_timer_expiry keep polling us + * for these. */ switch (rq->cmd[0]) { - case GPCMD_BLANK: - case GPCMD_FORMAT_UNIT: - case GPCMD_RESERVE_RZONE_TRACK: - case GPCMD_CLOSE_TRACK: - case GPCMD_FLUSH_CACHE: - wait = ATAPI_WAIT_PC; - break; - default: - if (!(rq->cmd_flags & REQ_QUIET)) - printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n", rq->cmd[0]); - wait = 0; - break; + case GPCMD_BLANK: + case GPCMD_FORMAT_UNIT: + case GPCMD_RESERVE_RZONE_TRACK: + case GPCMD_CLOSE_TRACK: + case GPCMD_FLUSH_CACHE: + wait = ATAPI_WAIT_PC; + break; + default: + if (!(rq->cmd_flags & REQ_QUIET)) + printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n", + rq->cmd[0]); + wait = 0; + break; } return wait; } -/* Set up the device registers for transferring a packet command on DEV, - expecting to later transfer XFERLEN bytes. HANDLER is the routine - which actually transfers the command to the drive. If this is a - drq_interrupt device, this routine will arrange for HANDLER to be - called when the interrupt from the drive arrives. Otherwise, HANDLER - will be called immediately after the drive is prepared for the transfer. */ - +/* + * Set up the device registers for transferring a packet command on DEV, + * expecting to later transfer XFERLEN bytes. HANDLER is the routine + * which actually transfers the command to the drive. If this is a + * drq_interrupt device, this routine will arrange for HANDLER to be + * called when the interrupt from the drive arrives. Otherwise, HANDLER + * will be called immediately after the drive is prepared for the transfer. + */ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, int xferlen, ide_handler_t *handler) @@ -517,15 +533,15 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, struct cdrom_info *info = drive->driver_data; ide_hwif_t *hwif = drive->hwif; - /* Wait for the controller to be idle. */ + /* wait for the controller to be idle */ if (ide_wait_stat(&startstop, drive, 0, BUSY_STAT, WAIT_READY)) return startstop; /* FIXME: for Virtual DMA we must check harder */ if (info->dma) - info->dma = !hwif->dma_setup(drive); + info->dma = !hwif->dma_ops->dma_setup(drive); - /* Set up the controller registers. */ + /* set up the controller registers */ ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL | IDE_TFLAG_NO_SELECT_MASK, xferlen, info->dma); @@ -535,14 +551,16 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, drive->waiting_for_dma = 0; /* packet command */ - ide_execute_command(drive, WIN_PACKETCMD, handler, ATAPI_WAIT_PC, cdrom_timer_expiry); + ide_execute_command(drive, WIN_PACKETCMD, handler, + ATAPI_WAIT_PC, cdrom_timer_expiry); return ide_started; } else { unsigned long flags; /* packet command */ spin_lock_irqsave(&ide_lock, flags); - hwif->OUTBSYNC(drive, WIN_PACKETCMD, IDE_COMMAND_REG); + hwif->OUTBSYNC(drive, WIN_PACKETCMD, + hwif->io_ports[IDE_COMMAND_OFFSET]); ndelay(400); spin_unlock_irqrestore(&ide_lock, flags); @@ -550,13 +568,14 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, } } -/* Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. - The device registers must have already been prepared - by cdrom_start_packet_command. - HANDLER is the interrupt handler to call when the command completes - or there's data ready. */ +/* + * Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device + * registers must have already been prepared by cdrom_start_packet_command. + * HANDLER is the interrupt handler to call when the command completes or + * there's data ready. + */ #define ATAPI_MIN_CDB_BYTES 12 -static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive, +static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, struct request *rq, ide_handler_t *handler) { @@ -566,24 +585,26 @@ static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive, ide_startstop_t startstop; if (info->cd_flags & IDE_CD_FLAG_DRQ_INTERRUPT) { - /* Here we should have been called after receiving an interrupt - from the device. DRQ should how be set. */ + /* + * Here we should have been called after receiving an interrupt + * from the device. DRQ should how be set. + */ - /* Check for errors. */ + /* check for errors */ if (cdrom_decode_status(drive, DRQ_STAT, NULL)) return ide_stopped; - /* Ok, next interrupt will be DMA interrupt. */ + /* ok, next interrupt will be DMA interrupt */ if (info->dma) drive->waiting_for_dma = 1; } else { - /* Otherwise, we must wait for DRQ to get set. */ + /* otherwise, we must wait for DRQ to get set */ if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) return startstop; } - /* Arm the interrupt handler. */ + /* arm the interrupt handler */ ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry); /* ATAPI commands get padded out to 12 bytes minimum */ @@ -591,20 +612,19 @@ static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive, if (cmd_len < ATAPI_MIN_CDB_BYTES) cmd_len = ATAPI_MIN_CDB_BYTES; - /* Send the command to the device. */ + /* send the command to the device */ HWIF(drive)->atapi_output_bytes(drive, rq->cmd, cmd_len); - /* Start the DMA if need be */ + /* start the DMA if need be */ if (info->dma) - hwif->dma_start(drive); + hwif->dma_ops->dma_start(drive); return ide_started; } -/**************************************************************************** +/* * Block read functions. */ - static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len) { while (len > 0) { @@ -625,47 +645,6 @@ static void ide_cd_drain_data(ide_drive_t *drive, int nsects) } /* - * Buffer up to SECTORS_TO_TRANSFER sectors from the drive in our sector - * buffer. Once the first sector is added, any subsequent sectors are - * assumed to be continuous (until the buffer is cleared). For the first - * sector added, SECTOR is its sector number. (SECTOR is then ignored until - * the buffer is cleared.) - */ -static void cdrom_buffer_sectors (ide_drive_t *drive, unsigned long sector, - int sectors_to_transfer) -{ - struct cdrom_info *info = drive->driver_data; - - /* Number of sectors to read into the buffer. */ - int sectors_to_buffer = min_t(int, sectors_to_transfer, - (SECTOR_BUFFER_SIZE >> SECTOR_BITS) - - info->nsectors_buffered); - - char *dest; - - /* If we couldn't get a buffer, don't try to buffer anything... */ - if (info->buffer == NULL) - sectors_to_buffer = 0; - - /* If this is the first sector in the buffer, remember its number. */ - if (info->nsectors_buffered == 0) - info->sector_buffered = sector; - - /* Read the data into the buffer. */ - dest = info->buffer + info->nsectors_buffered * SECTOR_SIZE; - while (sectors_to_buffer > 0) { - HWIF(drive)->atapi_input_bytes(drive, dest, SECTOR_SIZE); - --sectors_to_buffer; - --sectors_to_transfer; - ++info->nsectors_buffered; - dest += SECTOR_SIZE; - } - - /* Throw away any remaining data. */ - ide_cd_drain_data(drive, sectors_to_transfer); -} - -/* * Check the contents of the interrupt reason register from the cdrom * and attempt to recover if there are problems. Returns 0 if everything's * ok; nonzero if the request has been terminated. @@ -683,22 +662,23 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, ide_hwif_t *hwif = drive->hwif; xfer_func_t *xf; - /* Whoops... */ + /* whoops... */ printk(KERN_ERR "%s: %s: wrong transfer direction!\n", - drive->name, __FUNCTION__); + drive->name, __func__); xf = rw ? hwif->atapi_output_bytes : hwif->atapi_input_bytes; ide_cd_pad_transfer(drive, xf, len); } else if (rw == 0 && ireason == 1) { - /* Some drives (ASUS) seem to tell us that status - * info is available. just get it and ignore. + /* + * Some drives (ASUS) seem to tell us that status info is + * available. Just get it and ignore. */ (void)ide_read_status(drive); return 0; } else { - /* Drive wants a command packet, or invalid ireason... */ + /* drive wants a command packet, or invalid ireason... */ printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n", - drive->name, __FUNCTION__, ireason); + drive->name, __func__, ireason); } if (rq->cmd_type == REQ_TYPE_ATA_PC) @@ -720,7 +700,7 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len) return 0; printk(KERN_ERR "%s: %s: Bad transfer size %d\n", - drive->name, __FUNCTION__, len); + drive->name, __func__, len); if (cd->cd_flags & IDE_CD_FLAG_LIMIT_NFRAMES) printk(KERN_ERR " This drive is not supported by " @@ -733,72 +713,13 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len) return 1; } -/* - * Try to satisfy some of the current read request from our cached data. - * Returns nonzero if the request has been completed, zero otherwise. - */ -static int cdrom_read_from_buffer (ide_drive_t *drive) -{ - struct cdrom_info *info = drive->driver_data; - struct request *rq = HWGROUP(drive)->rq; - unsigned short sectors_per_frame; - - sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS; - - /* Can't do anything if there's no buffer. */ - if (info->buffer == NULL) return 0; - - /* Loop while this request needs data and the next block is present - in our cache. */ - while (rq->nr_sectors > 0 && - rq->sector >= info->sector_buffered && - rq->sector < info->sector_buffered + info->nsectors_buffered) { - if (rq->current_nr_sectors == 0) - cdrom_end_request(drive, 1); - - memcpy (rq->buffer, - info->buffer + - (rq->sector - info->sector_buffered) * SECTOR_SIZE, - SECTOR_SIZE); - rq->buffer += SECTOR_SIZE; - --rq->current_nr_sectors; - --rq->nr_sectors; - ++rq->sector; - } - - /* If we've satisfied the current request, - terminate it successfully. */ - if (rq->nr_sectors == 0) { - cdrom_end_request(drive, 1); - return -1; - } - - /* Move on to the next buffer if needed. */ - if (rq->current_nr_sectors == 0) - cdrom_end_request(drive, 1); - - /* If this condition does not hold, then the kluge i use to - represent the number of sectors to skip at the start of a transfer - will fail. I think that this will never happen, but let's be - paranoid and check. */ - if (rq->current_nr_sectors < bio_cur_sectors(rq->bio) && - (rq->sector & (sectors_per_frame - 1))) { - printk(KERN_ERR "%s: cdrom_read_from_buffer: buffer botch (%ld)\n", - drive->name, (long)rq->sector); - cdrom_end_request(drive, 0); - return -1; - } - - return 0; -} - static ide_startstop_t cdrom_newpc_intr(ide_drive_t *); /* - * Routine to send a read/write packet command to the drive. - * This is usually called directly from cdrom_start_{read,write}(). - * However, for drq_interrupt devices, it is called from an interrupt - * when the drive is ready to accept the command. + * Routine to send a read/write packet command to the drive. This is usually + * called directly from cdrom_start_{read,write}(). However, for drq_interrupt + * devices, it is called from an interrupt when the drive is ready to accept + * the command. */ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) { @@ -820,11 +741,11 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) * is larger than the buffer size. */ if (nskip > 0) { - /* Sanity check... */ + /* sanity check... */ if (rq->current_nr_sectors != bio_cur_sectors(rq->bio)) { printk(KERN_ERR "%s: %s: buffer botch (%u)\n", - drive->name, __FUNCTION__, + drive->name, __func__, rq->current_nr_sectors); cdrom_end_request(drive, 0); return ide_stopped; @@ -837,10 +758,10 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) /* the immediate bit */ rq->cmd[1] = 1 << 3; #endif - /* Set up the command */ + /* set up the command */ rq->timeout = ATAPI_WAIT_PC; - /* Send the command to the drive and return. */ + /* send the command to the drive and return */ return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr); } @@ -848,7 +769,7 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) #define IDECD_SEEK_TIMER (5 * WAIT_MIN_SLEEP) /* 100 ms */ #define IDECD_SEEK_TIMEOUT (2 * WAIT_CMD) /* 20 sec */ -static ide_startstop_t cdrom_seek_intr (ide_drive_t *drive) +static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive) { struct cdrom_info *info = drive->driver_data; int stat; @@ -860,19 +781,13 @@ static ide_startstop_t cdrom_seek_intr (ide_drive_t *drive) info->cd_flags |= IDE_CD_FLAG_SEEKING; if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) { - if (--retry == 0) { - /* - * this condition is far too common, to bother - * users about it - */ - /* printk("%s: disabled DSC seek overlap\n", drive->name);*/ + if (--retry == 0) drive->dsc_overlap = 0; - } } return ide_stopped; } -static ide_startstop_t cdrom_start_seek_continuation (ide_drive_t *drive) +static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) { struct request *rq = HWGROUP(drive)->rq; sector_t frame = rq->sector; @@ -887,36 +802,40 @@ static ide_startstop_t cdrom_start_seek_continuation (ide_drive_t *drive) return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr); } -static ide_startstop_t cdrom_start_seek (ide_drive_t *drive, unsigned int block) +static ide_startstop_t cdrom_start_seek(ide_drive_t *drive, unsigned int block) { struct cdrom_info *info = drive->driver_data; info->dma = 0; info->start_seek = jiffies; - return cdrom_start_packet_command(drive, 0, cdrom_start_seek_continuation); + return cdrom_start_packet_command(drive, 0, + cdrom_start_seek_continuation); } -/* Fix up a possibly partially-processed request so that we can - start it over entirely, or even put it back on the request queue. */ -static void restore_request (struct request *rq) +/* + * Fix up a possibly partially-processed request so that we can start it over + * entirely, or even put it back on the request queue. + */ +static void restore_request(struct request *rq) { if (rq->buffer != bio_data(rq->bio)) { - sector_t n = (rq->buffer - (char *) bio_data(rq->bio)) / SECTOR_SIZE; + sector_t n = + (rq->buffer - (char *)bio_data(rq->bio)) / SECTOR_SIZE; rq->buffer = bio_data(rq->bio); rq->nr_sectors += n; rq->sector -= n; } - rq->hard_cur_sectors = rq->current_nr_sectors = bio_cur_sectors(rq->bio); + rq->current_nr_sectors = bio_cur_sectors(rq->bio); + rq->hard_cur_sectors = rq->current_nr_sectors; rq->hard_nr_sectors = rq->nr_sectors; rq->hard_sector = rq->sector; rq->q->prep_rq_fn(rq->q, rq); } -/**************************************************************************** - * Execute all other packet commands. +/* + * All other packet commands. */ - static void ide_cd_request_sense_fixup(struct request *rq) { /* @@ -940,7 +859,7 @@ int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq) if (rq->sense == NULL) rq->sense = &sense; - /* Start of retry loop. */ + /* start of retry loop */ do { int error; unsigned long time = jiffies; @@ -949,41 +868,45 @@ int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq) error = ide_do_drive_cmd(drive, rq, ide_wait); time = jiffies - time; - /* FIXME: we should probably abort/retry or something - * in case of failure */ + /* + * FIXME: we should probably abort/retry or something in case of + * failure. + */ if (rq->cmd_flags & REQ_FAILED) { - /* The request failed. Retry if it was due to a unit - attention status - (usually means media was changed). */ + /* + * The request failed. Retry if it was due to a unit + * attention status (usually means media was changed). + */ struct request_sense *reqbuf = rq->sense; if (reqbuf->sense_key == UNIT_ATTENTION) cdrom_saw_media_change(drive); else if (reqbuf->sense_key == NOT_READY && reqbuf->asc == 4 && reqbuf->ascq != 4) { - /* The drive is in the process of loading - a disk. Retry, but wait a little to give - the drive time to complete the load. */ + /* + * The drive is in the process of loading + * a disk. Retry, but wait a little to give + * the drive time to complete the load. + */ ssleep(2); } else { - /* Otherwise, don't retry. */ + /* otherwise, don't retry */ retries = 0; } --retries; } - /* End of retry loop. */ + /* end of retry loop */ } while ((rq->cmd_flags & REQ_FAILED) && retries >= 0); - /* Return an error if the command failed. */ + /* return an error if the command failed */ return (rq->cmd_flags & REQ_FAILED) ? -EIO : 0; } /* - * Called from blk_end_request_callback() after the data of the request - * is completed and before the request is completed. - * By returning value '1', blk_end_request_callback() returns immediately - * without completing the request. + * Called from blk_end_request_callback() after the data of the request is + * completed and before the request itself is completed. By returning value '1', + * blk_end_request_callback() returns immediately without completing it. */ static int cdrom_newpc_intr_dummy_cb(struct request *rq) { @@ -992,6 +915,7 @@ static int cdrom_newpc_intr_dummy_cb(struct request *rq) static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; struct cdrom_info *info = drive->driver_data; struct request *rq = HWGROUP(drive)->rq; xfer_func_t *xferfunc; @@ -1001,11 +925,11 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) unsigned int timeout; u8 lowcyl, highcyl; - /* Check for errors. */ + /* check for errors */ dma = info->dma; if (dma) { info->dma = 0; - dma_error = HWIF(drive)->ide_dma_end(drive); + dma_error = hwif->dma_ops->dma_end(drive); if (dma_error) { printk(KERN_ERR "%s: DMA %s error\n", drive->name, write ? "write" : "read"); @@ -1016,9 +940,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (cdrom_decode_status(drive, 0, &stat)) return ide_stopped; - /* - * using dma, transfer is complete now - */ + /* using dma, transfer is complete now */ if (dma) { if (dma_error) return ide_error(drive, "dma error", stat); @@ -1029,12 +951,10 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) goto end_request; } - /* - * ok we fall to pio :/ - */ - ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3; - lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG); - highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG); + /* ok we fall to pio :/ */ + ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]) & 0x3; + lowcyl = hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]); + highcyl = hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]); len = lowcyl + (256 * highcyl); @@ -1042,9 +962,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (thislen > len) thislen = len; - /* - * If DRQ is clear, the command has completed. - */ + /* If DRQ is clear, the command has completed. */ if ((stat & DRQ_STAT) == 0) { if (blk_fs_request(rq)) { /* @@ -1055,7 +973,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (rq->current_nr_sectors > 0) { printk(KERN_ERR "%s: %s: data underrun " "(%d blocks)\n", - drive->name, __FUNCTION__, + drive->name, __func__, rq->current_nr_sectors); if (!write) rq->cmd_flags |= REQ_FAILED; @@ -1065,15 +983,13 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) return ide_stopped; } else if (!blk_pc_request(rq)) { ide_cd_request_sense_fixup(rq); - /* Complain if we still have data left to transfer. */ + /* complain if we still have data left to transfer */ uptodate = rq->data_len ? 0 : 1; } goto end_request; } - /* - * check which way to transfer data - */ + /* check which way to transfer data */ if (ide_cd_check_ireason(drive, rq, len, ireason, write)) return ide_stopped; @@ -1109,16 +1025,12 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) xferfunc = HWIF(drive)->atapi_input_bytes; } - /* - * transfer data - */ + /* transfer data */ while (thislen > 0) { u8 *ptr = blk_fs_request(rq) ? NULL : rq->data; int blen = rq->data_len; - /* - * bio backed? - */ + /* bio backed? */ if (rq->bio) { if (blk_fs_request(rq)) { ptr = rq->buffer; @@ -1132,11 +1044,10 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (!ptr) { if (blk_fs_request(rq) && !write) /* - * If the buffers are full, cache the rest - * of the data in our internal buffer. + * If the buffers are full, pipe the rest into + * oblivion. */ - cdrom_buffer_sectors(drive, rq->sector, - thislen >> 9); + ide_cd_drain_data(drive, thislen >> 9); else { printk(KERN_ERR "%s: confused, missing data\n", drive->name); @@ -1182,9 +1093,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) rq->sense_len += blen; } - /* - * pad, if necessary - */ + /* pad, if necessary */ if (!blk_fs_request(rq) && len > 0) ide_cd_pad_transfer(drive, xferfunc, len); @@ -1228,9 +1137,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) queue_hardsect_size(drive->queue) >> SECTOR_BITS; if (write) { - /* - * disk has become write protected - */ + /* disk has become write protected */ if (cd->disk->policy) { cdrom_end_request(drive, 0); return ide_stopped; @@ -1241,15 +1148,9 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) * weirdness which might be present in the request packet. */ restore_request(rq); - - /* Satisfy whatever we can of this request from our cache. */ - if (cdrom_read_from_buffer(drive)) - return ide_stopped; } - /* - * use DMA, if possible / writes *must* be hardware frame aligned - */ + /* use DMA, if possible / writes *must* be hardware frame aligned */ if ((rq->nr_sectors & (sectors_per_frame - 1)) || (rq->sector & (sectors_per_frame - 1))) { if (write) { @@ -1260,13 +1161,10 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) } else cd->dma = drive->using_dma; - /* Clear the local sector buffer. */ - cd->nsectors_buffered = 0; - if (write) cd->devinfo.media_written = 1; - /* Start sending the read/write request to the drive. */ + /* start sending the read/write request to the drive */ return cdrom_start_packet_command(drive, 32768, cdrom_start_rw_cont); } @@ -1291,12 +1189,11 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) info->dma = 0; - /* - * sg request - */ + /* sg request */ if (rq->bio) { int mask = drive->queue->dma_alignment; - unsigned long addr = (unsigned long) page_address(bio_page(rq->bio)); + unsigned long addr = + (unsigned long)page_address(bio_page(rq->bio)); info->dma = drive->using_dma; @@ -1310,15 +1207,16 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) info->dma = 0; } - /* Start sending the command to the drive. */ - return cdrom_start_packet_command(drive, rq->data_len, cdrom_do_newpc_cont); + /* start sending the command to the drive */ + return cdrom_start_packet_command(drive, rq->data_len, + cdrom_do_newpc_cont); } -/**************************************************************************** +/* * cdrom driver request routine. */ -static ide_startstop_t -ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block) +static ide_startstop_t ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, + sector_t block) { ide_startstop_t action; struct cdrom_info *info = drive->driver_data; @@ -1330,16 +1228,21 @@ ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block) if ((stat & SEEK_STAT) != SEEK_STAT) { if (elapsed < IDECD_SEEK_TIMEOUT) { - ide_stall_queue(drive, IDECD_SEEK_TIMER); + ide_stall_queue(drive, + IDECD_SEEK_TIMER); return ide_stopped; } - printk (KERN_ERR "%s: DSC timeout\n", drive->name); + printk(KERN_ERR "%s: DSC timeout\n", + drive->name); } info->cd_flags &= ~IDE_CD_FLAG_SEEKING; } - if ((rq_data_dir(rq) == READ) && IDE_LARGE_SEEK(info->last_block, block, IDECD_SEEK_THRESHOLD) && drive->dsc_overlap) { + if (rq_data_dir(rq) == READ && + IDE_LARGE_SEEK(info->last_block, block, + IDECD_SEEK_THRESHOLD) && + drive->dsc_overlap) action = cdrom_start_seek(drive, block); - } else + else action = cdrom_start_rw(drive, rq); info->last_block = block; return action; @@ -1347,9 +1250,7 @@ ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block) rq->cmd_type == REQ_TYPE_ATA_PC) { return cdrom_do_block_pc(drive, rq); } else if (blk_special_request(rq)) { - /* - * right now this can only be a reset... - */ + /* right now this can only be a reset... */ cdrom_end_request(drive, 1); return ide_stopped; } @@ -1361,18 +1262,16 @@ ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block) -/**************************************************************************** +/* * Ioctl handling. * - * Routines which queue packet commands take as a final argument a pointer - * to a request_sense struct. If execution of the command results - * in an error with a CHECK CONDITION status, this structure will be filled - * with the results of the subsequent request sense command. The pointer - * can also be NULL, in which case no sense information is returned. + * Routines which queue packet commands take as a final argument a pointer to a + * request_sense struct. If execution of the command results in an error with a + * CHECK CONDITION status, this structure will be filled with the results of the + * subsequent request sense command. The pointer can also be NULL, in which case + * no sense information is returned. */ - -static -void msf_from_bcd (struct atapi_msf *msf) +static void msf_from_bcd(struct atapi_msf *msf) { msf->minute = BCD2BIN(msf->minute); msf->second = BCD2BIN(msf->second); @@ -1392,8 +1291,8 @@ int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense) req.cmd_flags |= REQ_QUIET; /* - * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to - * switch CDs instead of supporting the LOAD_UNLOAD opcode. + * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to switch CDs + * instead of supporting the LOAD_UNLOAD opcode. */ req.cmd[7] = cdi->sanyo_slot % 3; @@ -1469,36 +1368,39 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) unsigned long sectors_per_frame = SECTORS_PER_FRAME; if (toc == NULL) { - /* Try to allocate space. */ + /* try to allocate space */ toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL); if (toc == NULL) { - printk (KERN_ERR "%s: No cdrom TOC buffer!\n", drive->name); + printk(KERN_ERR "%s: No cdrom TOC buffer!\n", + drive->name); return -ENOMEM; } info->toc = toc; } - /* Check to see if the existing data is still valid. - If it is, just return. */ + /* + * Check to see if the existing data is still valid. If it is, + * just return. + */ (void) cdrom_check_status(drive, sense); if (info->cd_flags & IDE_CD_FLAG_TOC_VALID) return 0; - /* Try to get the total cdrom capacity and sector size. */ + /* try to get the total cdrom capacity and sector size */ stat = cdrom_read_capacity(drive, &toc->capacity, §ors_per_frame, sense); if (stat) toc->capacity = 0x1fffff; set_capacity(info->disk, toc->capacity * sectors_per_frame); - /* Save a private copy of te TOC capacity for error handling */ + /* save a private copy of the TOC capacity for error handling */ drive->probed_capacity = toc->capacity * sectors_per_frame; blk_queue_hardsect_size(drive->queue, sectors_per_frame << SECTOR_BITS); - /* First read just the header, so we know how long the TOC is. */ + /* first read just the header, so we know how long the TOC is */ stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr, sizeof(struct atapi_toc_header), sense); if (stat) @@ -1515,7 +1417,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) if (ntracks > MAX_TRACKS) ntracks = MAX_TRACKS; - /* Now read the whole schmeer. */ + /* now read the whole schmeer */ stat = cdrom_read_tocentry(drive, toc->hdr.first_track, 1, 0, (char *)&toc->hdr, sizeof(struct atapi_toc_header) + @@ -1523,15 +1425,18 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) sizeof(struct atapi_toc_entry), sense); if (stat && toc->hdr.first_track > 1) { - /* Cds with CDI tracks only don't have any TOC entries, - despite of this the returned values are - first_track == last_track = number of CDI tracks + 1, - so that this case is indistinguishable from the same - layout plus an additional audio track. - If we get an error for the regular case, we assume - a CDI without additional audio tracks. In this case - the readable TOC is empty (CDI tracks are not included) - and only holds the Leadout entry. Heiko Eißfeldt */ + /* + * Cds with CDI tracks only don't have any TOC entries, despite + * of this the returned values are + * first_track == last_track = number of CDI tracks + 1, + * so that this case is indistinguishable from the same layout + * plus an additional audio track. If we get an error for the + * regular case, we assume a CDI without additional audio + * tracks. In this case the readable TOC is empty (CDI tracks + * are not included) and only holds the Leadout entry. + * + * Heiko Eißfeldt. + */ ntracks = 0; stat = cdrom_read_tocentry(drive, CDROM_LEADOUT, 1, 0, (char *)&toc->hdr, @@ -1567,14 +1472,13 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) toc->ent[i].track = BCD2BIN(toc->ent[i].track); msf_from_bcd(&toc->ent[i].addr.msf); } - toc->ent[i].addr.lba = msf_to_lba (toc->ent[i].addr.msf.minute, - toc->ent[i].addr.msf.second, - toc->ent[i].addr.msf.frame); + toc->ent[i].addr.lba = msf_to_lba(toc->ent[i].addr.msf.minute, + toc->ent[i].addr.msf.second, + toc->ent[i].addr.msf.frame); } - /* Read the multisession information. */ if (toc->hdr.first_track != CDROM_LEADOUT) { - /* Read the multisession information. */ + /* read the multisession information */ stat = cdrom_read_tocentry(drive, 0, 0, 1, (char *)&ms_tmp, sizeof(ms_tmp), sense); if (stat) @@ -1582,26 +1486,27 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) toc->last_session_lba = be32_to_cpu(ms_tmp.ent.addr.lba); } else { - ms_tmp.hdr.first_track = ms_tmp.hdr.last_track = CDROM_LEADOUT; + ms_tmp.hdr.last_track = CDROM_LEADOUT; + ms_tmp.hdr.first_track = ms_tmp.hdr.last_track; toc->last_session_lba = msf_to_lba(0, 2, 0); /* 0m 2s 0f */ } if (info->cd_flags & IDE_CD_FLAG_TOCADDR_AS_BCD) { - /* Re-read multisession information using MSF format */ + /* re-read multisession information using MSF format */ stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp, sizeof(ms_tmp), sense); if (stat) return stat; - msf_from_bcd (&ms_tmp.ent.addr.msf); + msf_from_bcd(&ms_tmp.ent.addr.msf); toc->last_session_lba = msf_to_lba(ms_tmp.ent.addr.msf.minute, - ms_tmp.ent.addr.msf.second, + ms_tmp.ent.addr.msf.second, ms_tmp.ent.addr.msf.frame); } toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track); - /* Now try to get the total cdrom capacity. */ + /* now try to get the total cdrom capacity */ stat = cdrom_get_last_written(cdi, &last_written); if (!stat && (last_written > toc->capacity)) { toc->capacity = last_written; @@ -1626,7 +1531,8 @@ int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf) size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE; init_cdrom_command(&cgc, buf, size, CGC_DATA_UNKNOWN); - do { /* we seem to get stat=0x01,err=0x00 the first time (??) */ + do { + /* we seem to get stat=0x01,err=0x00 the first time (??) */ stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CAPABILITIES_PAGE, 0); if (!stat) break; @@ -1677,7 +1583,7 @@ static struct cdrom_device_ops ide_cdrom_dops = { .generic_packet = ide_cdrom_packet, }; -static int ide_cdrom_register (ide_drive_t *drive, int nslots) +static int ide_cdrom_register(ide_drive_t *drive, int nslots) { struct cdrom_info *info = drive->driver_data; struct cdrom_device_info *devinfo = &info->devinfo; @@ -1695,8 +1601,7 @@ static int ide_cdrom_register (ide_drive_t *drive, int nslots) return register_cdrom(devinfo); } -static -int ide_cdrom_probe_capabilities (ide_drive_t *drive) +static int ide_cdrom_probe_capabilities(ide_drive_t *drive) { struct cdrom_info *cd = drive->driver_data; struct cdrom_device_info *cdi = &cd->devinfo; @@ -1710,7 +1615,8 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive) if (drive->media == ide_optical) { cdi->mask &= ~(CDC_MO_DRIVE | CDC_RAM); - printk(KERN_ERR "%s: ATAPI magneto-optical drive\n", drive->name); + printk(KERN_ERR "%s: ATAPI magneto-optical drive\n", + drive->name); return nslots; } @@ -1721,11 +1627,10 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive) } /* - * we have to cheat a little here. the packet will eventually - * be queued with ide_cdrom_packet(), which extracts the - * drive from cdi->handle. Since this device hasn't been - * registered with the Uniform layer yet, it can't do this. - * Same goes for cdi->ops. + * We have to cheat a little here. the packet will eventually be queued + * with ide_cdrom_packet(), which extracts the drive from cdi->handle. + * Since this device hasn't been registered with the Uniform layer yet, + * it can't do this. Same goes for cdi->ops. */ cdi->handle = drive; cdi->ops = &ide_cdrom_dops; @@ -1794,18 +1699,7 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive) return nslots; } -#ifdef CONFIG_IDE_PROC_FS -static void ide_cdrom_add_settings(ide_drive_t *drive) -{ - ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL); -} -#else -static inline void ide_cdrom_add_settings(ide_drive_t *drive) { ; } -#endif - -/* - * standard prep_rq_fn that builds 10 byte cmds - */ +/* standard prep_rq_fn that builds 10 byte cmds */ static int ide_cdrom_prep_fs(struct request_queue *q, struct request *rq) { int hard_sect = queue_hardsect_size(q); @@ -1844,9 +1738,7 @@ static int ide_cdrom_prep_pc(struct request *rq) { u8 *c = rq->cmd; - /* - * Transform 6-byte read/write commands to the 10-byte version - */ + /* transform 6-byte read/write commands to the 10-byte version */ if (c[0] == READ_6 || c[0] == WRITE_6) { c[8] = c[4]; c[5] = c[3]; @@ -1868,7 +1760,7 @@ static int ide_cdrom_prep_pc(struct request *rq) rq->errors = ILLEGAL_REQUEST; return BLKPREP_KILL; } - + return BLKPREP_OK; } @@ -1888,6 +1780,41 @@ struct cd_list_entry { unsigned int cd_flags; }; +#ifdef CONFIG_IDE_PROC_FS +static sector_t ide_cdrom_capacity(ide_drive_t *drive) +{ + unsigned long capacity, sectors_per_frame; + + if (cdrom_read_capacity(drive, &capacity, §ors_per_frame, NULL)) + return 0; + + return capacity * sectors_per_frame; +} + +static int proc_idecd_read_capacity(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + ide_drive_t *drive = data; + int len; + + len = sprintf(page, "%llu\n", (long long)ide_cdrom_capacity(drive)); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +} + +static ide_proc_entry_t idecd_proc[] = { + { "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL }, + { NULL, 0, NULL, NULL } +}; + +static void ide_cdrom_add_settings(ide_drive_t *drive) +{ + ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, + &drive->dsc_overlap, NULL); +} +#else +static inline void ide_cdrom_add_settings(ide_drive_t *drive) { ; } +#endif + static const struct cd_list_entry ide_cd_quirks_list[] = { /* Limit transfer size per interrupt. */ { "SAMSUNG CD-ROM SCR-2430", NULL, IDE_CD_FLAG_LIMIT_NFRAMES }, @@ -1945,8 +1872,7 @@ static unsigned int ide_cd_flags(struct hd_driveid *id) return 0; } -static -int ide_cdrom_setup (ide_drive_t *drive) +static int ide_cdrom_setup(ide_drive_t *drive) { struct cdrom_info *cd = drive->driver_data; struct cdrom_device_info *cdi = &cd->devinfo; @@ -1975,21 +1901,19 @@ int ide_cdrom_setup (ide_drive_t *drive) id->fw_rev[4] == '1' && id->fw_rev[6] <= '2') cd->cd_flags |= IDE_CD_FLAG_TOCTRACKS_AS_BCD; else if (cd->cd_flags & IDE_CD_FLAG_SANYO_3CD) - cdi->sanyo_slot = 3; /* 3 => use CD in slot 0 */ + /* 3 => use CD in slot 0 */ + cdi->sanyo_slot = 3; - nslots = ide_cdrom_probe_capabilities (drive); + nslots = ide_cdrom_probe_capabilities(drive); - /* - * set correct block size - */ + /* set correct block size */ blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE); - if (drive->autotune == IDE_TUNE_DEFAULT || - drive->autotune == IDE_TUNE_AUTO) - drive->dsc_overlap = (drive->next != drive); + drive->dsc_overlap = (drive->next != drive); if (ide_cdrom_register(drive, nslots)) { - printk (KERN_ERR "%s: ide_cdrom_setup failed to register device with the cdrom driver.\n", drive->name); + printk(KERN_ERR "%s: %s failed to register device with the" + " cdrom driver.\n", drive->name, __func__); cd->devinfo.handle = NULL; return 1; } @@ -1997,19 +1921,6 @@ int ide_cdrom_setup (ide_drive_t *drive) return 0; } -#ifdef CONFIG_IDE_PROC_FS -static -sector_t ide_cdrom_capacity (ide_drive_t *drive) -{ - unsigned long capacity, sectors_per_frame; - - if (cdrom_read_capacity(drive, &capacity, §ors_per_frame, NULL)) - return 0; - - return capacity * sectors_per_frame; -} -#endif - static void ide_cd_remove(ide_drive_t *drive) { struct cdrom_info *info = drive->driver_data; @@ -2028,11 +1939,10 @@ static void ide_cd_release(struct kref *kref) ide_drive_t *drive = info->drive; struct gendisk *g = info->disk; - kfree(info->buffer); kfree(info->toc); if (devinfo->handle == drive && unregister_cdrom(devinfo)) - printk(KERN_ERR "%s: %s failed to unregister device from the cdrom " - "driver.\n", __FUNCTION__, drive->name); + printk(KERN_ERR "%s: %s failed to unregister device from the" + " cdrom driver.\n", drive->name, __func__); drive->dsc_overlap = 0; drive->driver_data = NULL; blk_queue_prep_rq(drive->queue, NULL); @@ -2043,23 +1953,6 @@ static void ide_cd_release(struct kref *kref) static int ide_cd_probe(ide_drive_t *); -#ifdef CONFIG_IDE_PROC_FS -static int proc_idecd_read_capacity - (char *page, char **start, off_t off, int count, int *eof, void *data) -{ - ide_drive_t *drive = data; - int len; - - len = sprintf(page,"%llu\n", (long long)ide_cdrom_capacity(drive)); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); -} - -static ide_proc_entry_t idecd_proc[] = { - { "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL }, - { NULL, 0, NULL, NULL } -}; -#endif - static ide_driver_t ide_cdrom_driver = { .gen_driver = { .owner = THIS_MODULE, @@ -2080,20 +1973,17 @@ static ide_driver_t ide_cdrom_driver = { #endif }; -static int idecd_open(struct inode * inode, struct file * file) +static int idecd_open(struct inode *inode, struct file *file) { struct gendisk *disk = inode->i_bdev->bd_disk; struct cdrom_info *info; int rc = -ENOMEM; - if (!(info = ide_cd_get(disk))) + info = ide_cd_get(disk); + if (!info) return -ENXIO; - if (!info->buffer) - info->buffer = kmalloc(SECTOR_BUFFER_SIZE, GFP_KERNEL|__GFP_REPEAT); - - if (info->buffer) - rc = cdrom_open(&info->devinfo, inode, file); + rc = cdrom_open(&info->devinfo, inode, file); if (rc < 0) ide_cd_put(info); @@ -2101,12 +1991,12 @@ static int idecd_open(struct inode * inode, struct file * file) return rc; } -static int idecd_release(struct inode * inode, struct file * file) +static int idecd_release(struct inode *inode, struct file *file) { struct gendisk *disk = inode->i_bdev->bd_disk; struct cdrom_info *info = ide_cd_g(disk); - cdrom_release (&info->devinfo, file); + cdrom_release(&info->devinfo, file); ide_cd_put(info); @@ -2138,7 +2028,7 @@ static int idecd_get_spindown(struct cdrom_device_info *cdi, unsigned long arg) struct packet_command cgc; char buffer[16]; int stat; - char spindown; + char spindown; init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_UNKNOWN); @@ -2147,12 +2037,12 @@ static int idecd_get_spindown(struct cdrom_device_info *cdi, unsigned long arg) return stat; spindown = buffer[11] & 0x0f; - if (copy_to_user((void __user *)arg, &spindown, sizeof (char))) + if (copy_to_user((void __user *)arg, &spindown, sizeof(char))) return -EFAULT; return 0; } -static int idecd_ioctl (struct inode *inode, struct file *file, +static int idecd_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { struct block_device *bdev = inode->i_bdev; @@ -2160,13 +2050,13 @@ static int idecd_ioctl (struct inode *inode, struct file *file, int err; switch (cmd) { - case CDROMSETSPINDOWN: + case CDROMSETSPINDOWN: return idecd_set_spindown(&info->devinfo, arg); - case CDROMGETSPINDOWN: + case CDROMGETSPINDOWN: return idecd_get_spindown(&info->devinfo, arg); default: break; - } + } err = generic_ide_ioctl(info->drive, file, bdev, cmd, arg); if (err == -EINVAL) @@ -2192,16 +2082,16 @@ static int idecd_revalidate_disk(struct gendisk *disk) } static struct block_device_operations idecd_ops = { - .owner = THIS_MODULE, - .open = idecd_open, - .release = idecd_release, - .ioctl = idecd_ioctl, - .media_changed = idecd_media_changed, - .revalidate_disk= idecd_revalidate_disk + .owner = THIS_MODULE, + .open = idecd_open, + .release = idecd_release, + .ioctl = idecd_ioctl, + .media_changed = idecd_media_changed, + .revalidate_disk = idecd_revalidate_disk }; -/* options */ -static char *ignore = NULL; +/* module options */ +static char *ignore; module_param(ignore, charp, 0400); MODULE_DESCRIPTION("ATAPI CD-ROM Driver"); @@ -2221,17 +2111,20 @@ static int ide_cd_probe(ide_drive_t *drive) /* skip drives that we were told to ignore */ if (ignore != NULL) { if (strstr(ignore, drive->name)) { - printk(KERN_INFO "ide-cd: ignoring drive %s\n", drive->name); + printk(KERN_INFO "ide-cd: ignoring drive %s\n", + drive->name); goto failed; } } if (drive->scsi) { - printk(KERN_INFO "ide-cd: passing drive %s to ide-scsi emulation.\n", drive->name); + printk(KERN_INFO "ide-cd: passing drive %s to ide-scsi " + "emulation.\n", drive->name); goto failed; } info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL); if (info == NULL) { - printk(KERN_ERR "%s: Can't allocate a cdrom structure\n", drive->name); + printk(KERN_ERR "%s: Can't allocate a cdrom structure\n", + drive->name); goto failed; } diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index 22e3751a681e..a58801c4484d 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -119,10 +119,6 @@ struct cdrom_info { struct atapi_toc *toc; - unsigned long sector_buffered; - unsigned long nsectors_buffered; - unsigned char *buffer; - /* The result of the last successful request sense command on this device. */ struct request_sense sense_data; diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 39501d130256..8e08d083fce9 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -16,8 +16,6 @@ #define IDEDISK_VERSION "1.18" -//#define DEBUG - #include <linux/module.h> #include <linux/types.h> #include <linux/string.h> @@ -88,7 +86,7 @@ static void ide_disk_put(struct ide_disk_obj *idkp) * * It is called only once for each drive. */ -static int lba_capacity_is_ok (struct hd_driveid *id) +static int lba_capacity_is_ok(struct hd_driveid *id) { unsigned long lba_sects, chs_sects, head, tail; @@ -176,7 +174,8 @@ static void ide_tf_set_cmd(ide_drive_t *drive, ide_task_t *task, u8 dma) * __ide_do_rw_disk() issues READ and WRITE commands to a disk, * using LBA if supported, or CHS otherwise, to address sectors. */ -static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, sector_t block) +static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, + sector_t block) { ide_hwif_t *hwif = HWIF(drive); unsigned int dma = drive->using_dma; @@ -228,7 +227,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, tf->device = (block >> 8) & 0xf; } } else { - unsigned int sect,head,cyl,track; + unsigned int sect, head, cyl, track; + track = (int)block / drive->sect; sect = (int)block % drive->sect + 1; head = track % drive->head; @@ -271,7 +271,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, * 1073741822 == 549756 MB or 48bit addressing fake drive */ -static ide_startstop_t ide_do_rw_disk (ide_drive_t *drive, struct request *rq, sector_t block) +static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq, + sector_t block) { ide_hwif_t *hwif = HWIF(drive); @@ -452,7 +453,7 @@ static void idedisk_check_hpa(ide_drive_t *drive) * in above order (i.e., if value of higher priority is available, * reset will be ignored). */ -static void init_idedisk_capacity (ide_drive_t *drive) +static void init_idedisk_capacity(ide_drive_t *drive) { struct hd_driveid *id = drive->id; /* @@ -479,7 +480,7 @@ static void init_idedisk_capacity (ide_drive_t *drive) } } -static sector_t idedisk_capacity (ide_drive_t *drive) +static sector_t idedisk_capacity(ide_drive_t *drive) { return drive->capacity64 - drive->sect0; } @@ -524,10 +525,11 @@ static int proc_idedisk_read_cache int len; if (drive->id_read) - len = sprintf(out,"%i\n", drive->id->buf_size / 2); + len = sprintf(out, "%i\n", drive->id->buf_size / 2); else - len = sprintf(out,"(none)\n"); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + len = sprintf(out, "(none)\n"); + + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static int proc_idedisk_read_capacity @@ -536,54 +538,52 @@ static int proc_idedisk_read_capacity ide_drive_t*drive = (ide_drive_t *)data; int len; - len = sprintf(page,"%llu\n", (long long)idedisk_capacity(drive)); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + len = sprintf(page, "%llu\n", (long long)idedisk_capacity(drive)); + + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } -static int proc_idedisk_read_smart_thresholds - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int proc_idedisk_read_smart(char *page, char **start, off_t off, + int count, int *eof, void *data, u8 sub_cmd) { ide_drive_t *drive = (ide_drive_t *)data; int len = 0, i = 0; - if (get_smart_data(drive, page, SMART_READ_THRESHOLDS) == 0) { + if (get_smart_data(drive, page, sub_cmd) == 0) { unsigned short *val = (unsigned short *) page; char *out = ((char *)val) + (SECTOR_WORDS * 4); page = out; do { - out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); + out += sprintf(out, "%04x%c", le16_to_cpu(*val), + (++i & 7) ? ' ' : '\n'); val += 1; } while (i < (SECTOR_WORDS * 2)); len = out - page; } - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } -static int proc_idedisk_read_smart_values +static int proc_idedisk_read_sv (char *page, char **start, off_t off, int count, int *eof, void *data) { - ide_drive_t *drive = (ide_drive_t *)data; - int len = 0, i = 0; + return proc_idedisk_read_smart(page, start, off, count, eof, data, + SMART_READ_VALUES); +} - if (get_smart_data(drive, page, SMART_READ_VALUES) == 0) { - unsigned short *val = (unsigned short *) page; - char *out = ((char *)val) + (SECTOR_WORDS * 4); - page = out; - do { - out += sprintf(out, "%04x%c", le16_to_cpu(*val), (++i & 7) ? ' ' : '\n'); - val += 1; - } while (i < (SECTOR_WORDS * 2)); - len = out - page; - } - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); +static int proc_idedisk_read_st + (char *page, char **start, off_t off, int count, int *eof, void *data) +{ + return proc_idedisk_read_smart(page, start, off, count, eof, data, + SMART_READ_THRESHOLDS); } static ide_proc_entry_t idedisk_proc[] = { - { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL }, - { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL }, - { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, - { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_smart_values, NULL }, - { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_smart_thresholds, NULL }, + { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL }, + { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL }, + { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, + { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_sv, NULL }, + { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_st, NULL }, { NULL, 0, NULL, NULL } }; #endif /* CONFIG_IDE_PROC_FS */ @@ -625,12 +625,13 @@ static int set_multcount(ide_drive_t *drive, int arg) if (drive->special.b.set_multmode) return -EBUSY; - ide_init_drive_cmd (&rq); + ide_init_drive_cmd(&rq); rq.cmd_type = REQ_TYPE_ATA_TASKFILE; drive->mult_req = arg; drive->special.b.set_multmode = 1; - (void) ide_do_drive_cmd (drive, &rq, ide_wait); + (void)ide_do_drive_cmd(drive, &rq, ide_wait); + return (drive->mult_count == arg) ? 0 : -EIO; } @@ -706,7 +707,7 @@ static int write_cache(ide_drive_t *drive, int arg) return err; } -static int do_idedisk_flushcache (ide_drive_t *drive) +static int do_idedisk_flushcache(ide_drive_t *drive) { ide_task_t args; @@ -719,7 +720,7 @@ static int do_idedisk_flushcache (ide_drive_t *drive) return ide_no_data_taskfile(drive, &args); } -static int set_acoustic (ide_drive_t *drive, int arg) +static int set_acoustic(ide_drive_t *drive, int arg) { ide_task_t args; @@ -753,7 +754,7 @@ static int set_lba_addressing(ide_drive_t *drive, int arg) return 0; if (!idedisk_supports_lba48(drive->id)) - return -EIO; + return -EIO; drive->addressing = arg; return 0; } @@ -763,23 +764,35 @@ static void idedisk_add_settings(ide_drive_t *drive) { struct hd_driveid *id = drive->id; - ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, &drive->bios_cyl, NULL); - ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); - ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); - ide_add_setting(drive, "address", SETTING_RW, TYPE_BYTE, 0, 2, 1, 1, &drive->addressing, set_lba_addressing); - ide_add_setting(drive, "multcount", SETTING_RW, TYPE_BYTE, 0, id->max_multsect, 1, 1, &drive->mult_count, set_multcount); - ide_add_setting(drive, "nowerr", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->nowerr, set_nowerr); - ide_add_setting(drive, "lun", SETTING_RW, TYPE_INT, 0, 7, 1, 1, &drive->lun, NULL); - ide_add_setting(drive, "wcache", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->wcache, write_cache); - ide_add_setting(drive, "acoustic", SETTING_RW, TYPE_BYTE, 0, 254, 1, 1, &drive->acoustic, set_acoustic); - ide_add_setting(drive, "failures", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, &drive->failures, NULL); - ide_add_setting(drive, "max_failures", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, &drive->max_failures, NULL); + ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, + &drive->bios_cyl, NULL); + ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, + &drive->bios_head, NULL); + ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, + &drive->bios_sect, NULL); + ide_add_setting(drive, "address", SETTING_RW, TYPE_BYTE, 0, 2, 1, 1, + &drive->addressing, set_lba_addressing); + ide_add_setting(drive, "multcount", SETTING_RW, TYPE_BYTE, 0, + id->max_multsect, 1, 1, &drive->mult_count, + set_multcount); + ide_add_setting(drive, "nowerr", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, + &drive->nowerr, set_nowerr); + ide_add_setting(drive, "lun", SETTING_RW, TYPE_INT, 0, 7, 1, 1, + &drive->lun, NULL); + ide_add_setting(drive, "wcache", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, + &drive->wcache, write_cache); + ide_add_setting(drive, "acoustic", SETTING_RW, TYPE_BYTE, 0, 254, 1, 1, + &drive->acoustic, set_acoustic); + ide_add_setting(drive, "failures", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, + &drive->failures, NULL); + ide_add_setting(drive, "max_failures", SETTING_RW, TYPE_INT, 0, 65535, + 1, 1, &drive->max_failures, NULL); } #else static inline void idedisk_add_settings(ide_drive_t *drive) { ; } #endif -static void idedisk_setup (ide_drive_t *drive) +static void idedisk_setup(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; struct hd_driveid *id = drive->id; @@ -792,11 +805,10 @@ static void idedisk_setup (ide_drive_t *drive) if (drive->removable) { /* - * Removable disks (eg. SYQUEST); ignore 'WD' drives + * Removable disks (eg. SYQUEST); ignore 'WD' drives */ - if (id->model[0] != 'W' || id->model[1] != 'D') { + if (id->model[0] != 'W' || id->model[1] != 'D') drive->doorlocking = 1; - } } (void)set_lba_addressing(drive, 1); @@ -810,10 +822,11 @@ static void idedisk_setup (ide_drive_t *drive) blk_queue_max_sectors(drive->queue, max_s); } - printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, drive->queue->max_sectors / 2); + printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, + drive->queue->max_sectors / 2); /* calculate drive capacity, and select LBA if possible */ - init_idedisk_capacity (drive); + init_idedisk_capacity(drive); /* limit drive capacity to 137GB if LBA48 cannot be used */ if (drive->addressing == 0 && drive->capacity64 > 1ULL << 28) { @@ -826,9 +839,9 @@ static void idedisk_setup (ide_drive_t *drive) if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && drive->addressing) { if (drive->capacity64 > 1ULL << 28) { - printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode will" - " be used for accessing sectors > %u\n", - drive->name, 1 << 28); + printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode" + " will be used for accessing sectors " + "> %u\n", drive->name, 1 << 28); } else drive->addressing = 0; } @@ -837,7 +850,8 @@ static void idedisk_setup (ide_drive_t *drive) * if possible, give fdisk access to more of the drive, * by correcting bios_cyls: */ - capacity = idedisk_capacity (drive); + capacity = idedisk_capacity(drive); + if (!drive->forced_geom) { if (idedisk_supports_lba48(drive->id)) { @@ -993,7 +1007,8 @@ static int idedisk_open(struct inode *inode, struct file *filp) struct ide_disk_obj *idkp; ide_drive_t *drive; - if (!(idkp = ide_disk_get(disk))) + idkp = ide_disk_get(disk); + if (idkp == NULL) return -ENXIO; drive = idkp->drive; @@ -1115,13 +1130,13 @@ static int idedisk_revalidate_disk(struct gendisk *disk) } static struct block_device_operations idedisk_ops = { - .owner = THIS_MODULE, - .open = idedisk_open, - .release = idedisk_release, - .ioctl = idedisk_ioctl, - .getgeo = idedisk_getgeo, - .media_changed = idedisk_media_changed, - .revalidate_disk= idedisk_revalidate_disk + .owner = THIS_MODULE, + .open = idedisk_open, + .release = idedisk_release, + .ioctl = idedisk_ioctl, + .getgeo = idedisk_getgeo, + .media_changed = idedisk_media_changed, + .revalidate_disk = idedisk_revalidate_disk }; MODULE_DESCRIPTION("ATA DISK Driver"); @@ -1184,7 +1199,7 @@ failed: return -ENODEV; } -static void __exit idedisk_exit (void) +static void __exit idedisk_exit(void) { driver_unregister(&idedisk_driver.gen_driver); } diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index d61e5788d310..a6488473db0b 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -102,7 +102,7 @@ ide_startstop_t ide_dma_intr (ide_drive_t *drive) { u8 stat = 0, dma_stat = 0; - dma_stat = HWIF(drive)->ide_dma_end(drive); + dma_stat = drive->hwif->dma_ops->dma_end(drive); stat = ide_read_status(drive); if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) { @@ -394,7 +394,7 @@ void ide_dma_off_quietly(ide_drive_t *drive) drive->using_dma = 0; ide_toggle_bounce(drive, 0); - drive->hwif->dma_host_set(drive, 0); + drive->hwif->dma_ops->dma_host_set(drive, 0); } EXPORT_SYMBOL(ide_dma_off_quietly); @@ -427,7 +427,7 @@ void ide_dma_on(ide_drive_t *drive) drive->using_dma = 1; ide_toggle_bounce(drive, 1); - drive->hwif->dma_host_set(drive, 1); + drive->hwif->dma_ops->dma_host_set(drive, 1); } #ifdef CONFIG_BLK_DEV_IDEDMA_SFF @@ -482,11 +482,12 @@ int ide_dma_setup(ide_drive_t *drive) EXPORT_SYMBOL_GPL(ide_dma_setup); -static void ide_dma_exec_cmd(ide_drive_t *drive, u8 command) +void ide_dma_exec_cmd(ide_drive_t *drive, u8 command) { /* issue cmd to drive */ ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, dma_timer_expiry); } +EXPORT_SYMBOL_GPL(ide_dma_exec_cmd); void ide_dma_start(ide_drive_t *drive) { @@ -532,7 +533,7 @@ int __ide_dma_end (ide_drive_t *drive) EXPORT_SYMBOL(__ide_dma_end); /* returns 1 if dma irq issued, 0 otherwise */ -static int __ide_dma_test_irq(ide_drive_t *drive) +int ide_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); u8 dma_stat = hwif->INB(hwif->dma_status); @@ -542,9 +543,10 @@ static int __ide_dma_test_irq(ide_drive_t *drive) return 1; if (!drive->waiting_for_dma) printk(KERN_WARNING "%s: (%s) called while not waiting\n", - drive->name, __FUNCTION__); + drive->name, __func__); return 0; } +EXPORT_SYMBOL_GPL(ide_dma_test_irq); #else static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; } #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */ @@ -574,6 +576,7 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode) { struct hd_driveid *id = drive->id; ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; unsigned int mask = 0; switch(base) { @@ -581,8 +584,8 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode) if ((id->field_valid & 4) == 0) break; - if (hwif->udma_filter) - mask = hwif->udma_filter(drive); + if (port_ops && port_ops->udma_filter) + mask = port_ops->udma_filter(drive); else mask = hwif->ultra_mask; mask &= id->dma_ultra; @@ -598,8 +601,8 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode) case XFER_MW_DMA_0: if ((id->field_valid & 2) == 0) break; - if (hwif->mdma_filter) - mask = hwif->mdma_filter(drive); + if (port_ops && port_ops->mdma_filter) + mask = port_ops->mdma_filter(drive); else mask = hwif->mwdma_mask; mask &= id->dma_mword; @@ -688,7 +691,7 @@ static int ide_tune_dma(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; u8 speed; - if (noautodma || drive->nodma || (drive->id->capability & 1) == 0) + if (drive->nodma || (drive->id->capability & 1) == 0) return 0; /* consult the list of known "bad" drives */ @@ -703,17 +706,8 @@ static int ide_tune_dma(ide_drive_t *drive) speed = ide_max_dma_mode(drive); - if (!speed) { - /* is this really correct/needed? */ - if ((hwif->host_flags & IDE_HFLAG_CY82C693) && - ide_dma_good_drive(drive)) - return 1; - else - return 0; - } - - if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) - return 1; + if (!speed) + return 0; if (ide_set_dma_mode(drive, speed)) return 0; @@ -810,15 +804,15 @@ void ide_dma_timeout (ide_drive_t *drive) printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name); - if (hwif->ide_dma_test_irq(drive)) + if (hwif->dma_ops->dma_test_irq(drive)) return; - hwif->ide_dma_end(drive); + hwif->dma_ops->dma_end(drive); } EXPORT_SYMBOL(ide_dma_timeout); -static void ide_release_dma_engine(ide_hwif_t *hwif) +void ide_release_dma_engine(ide_hwif_t *hwif) { if (hwif->dmatable_cpu) { struct pci_dev *pdev = to_pci_dev(hwif->dev); @@ -829,28 +823,7 @@ static void ide_release_dma_engine(ide_hwif_t *hwif) } } -static int ide_release_iomio_dma(ide_hwif_t *hwif) -{ - release_region(hwif->dma_base, 8); - if (hwif->extra_ports) - release_region(hwif->extra_base, hwif->extra_ports); - return 1; -} - -/* - * Needed for allowing full modular support of ide-driver - */ -int ide_release_dma(ide_hwif_t *hwif) -{ - ide_release_dma_engine(hwif); - - if (hwif->mmio) - return 1; - else - return ide_release_iomio_dma(hwif); -} - -static int ide_allocate_dma_engine(ide_hwif_t *hwif) +int ide_allocate_dma_engine(ide_hwif_t *hwif) { struct pci_dev *pdev = to_pci_dev(hwif->dev); @@ -862,65 +835,25 @@ static int ide_allocate_dma_engine(ide_hwif_t *hwif) return 0; printk(KERN_ERR "%s: -- Error, unable to allocate DMA table.\n", - hwif->cds->name); + hwif->name); return 1; } - -static int ide_mapped_mmio_dma(ide_hwif_t *hwif, unsigned long base) -{ - printk(KERN_INFO " %s: MMIO-DMA ", hwif->name); - - return 0; -} - -static int ide_iomio_dma(ide_hwif_t *hwif, unsigned long base) -{ - printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx", - hwif->name, base, base + 7); - - if (!request_region(base, 8, hwif->name)) { - printk(" -- Error, ports in use.\n"); - return 1; - } - - if (hwif->cds->extra) { - hwif->extra_base = base + (hwif->channel ? 8 : 16); - - if (!hwif->mate || !hwif->mate->extra_ports) { - if (!request_region(hwif->extra_base, - hwif->cds->extra, hwif->cds->name)) { - printk(" -- Error, extra ports in use.\n"); - release_region(base, 8); - return 1; - } - hwif->extra_ports = hwif->cds->extra; - } - } - - return 0; -} - -static int ide_dma_iobase(ide_hwif_t *hwif, unsigned long base) -{ - if (hwif->mmio) - return ide_mapped_mmio_dma(hwif, base); - - return ide_iomio_dma(hwif, base); -} +EXPORT_SYMBOL_GPL(ide_allocate_dma_engine); + +static const struct ide_dma_ops sff_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = __ide_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_timeout = ide_dma_timeout, + .dma_lost_irq = ide_dma_lost_irq, +}; void ide_setup_dma(ide_hwif_t *hwif, unsigned long base) { - u8 dma_stat; - - if (ide_dma_iobase(hwif, base)) - return; - - if (ide_allocate_dma_engine(hwif)) { - ide_release_dma(hwif); - return; - } - hwif->dma_base = base; if (!hwif->dma_command) @@ -934,27 +867,7 @@ void ide_setup_dma(ide_hwif_t *hwif, unsigned long base) if (!hwif->dma_prdtable) hwif->dma_prdtable = hwif->dma_base + 4; - if (!hwif->dma_host_set) - hwif->dma_host_set = &ide_dma_host_set; - if (!hwif->dma_setup) - hwif->dma_setup = &ide_dma_setup; - if (!hwif->dma_exec_cmd) - hwif->dma_exec_cmd = &ide_dma_exec_cmd; - if (!hwif->dma_start) - hwif->dma_start = &ide_dma_start; - if (!hwif->ide_dma_end) - hwif->ide_dma_end = &__ide_dma_end; - if (!hwif->ide_dma_test_irq) - hwif->ide_dma_test_irq = &__ide_dma_test_irq; - if (!hwif->dma_timeout) - hwif->dma_timeout = &ide_dma_timeout; - if (!hwif->dma_lost_irq) - hwif->dma_lost_irq = &ide_dma_lost_irq; - - dma_stat = hwif->INB(hwif->dma_status); - printk(KERN_CONT ", BIOS settings: %s:%s, %s:%s\n", - hwif->drives[0].name, (dma_stat & 0x20) ? "DMA" : "PIO", - hwif->drives[1].name, (dma_stat & 0x40) ? "DMA" : "PIO"); + hwif->dma_ops = &sff_dma_ops; } EXPORT_SYMBOL_GPL(ide_setup_dma); diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index faf22d716f80..6e891bccd052 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -78,40 +78,6 @@ */ #define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES) -typedef struct idefloppy_packet_command_s { - u8 c[12]; /* Actual packet bytes */ - int retries; /* On each retry, we increment - retries */ - int error; /* Error code */ - int request_transfer; /* Bytes to transfer */ - int actually_transferred; /* Bytes actually transferred */ - int buffer_size; /* Size of our data buffer */ - int b_count; /* Missing/Available data on - the current buffer */ - struct request *rq; /* The corresponding request */ - u8 *buffer; /* Data buffer */ - u8 *current_position; /* Pointer into above buffer */ - void (*callback) (ide_drive_t *); /* Called when this packet - command is completed */ - u8 pc_buffer[IDEFLOPPY_PC_BUFFER_SIZE]; /* Temporary buffer */ - unsigned long flags; /* Status/Action bit flags: long - for set_bit */ -} idefloppy_pc_t; - -/* Packet command flag bits. */ -enum { - /* 1 when we prefer to use DMA if possible */ - PC_FLAG_DMA_RECOMMENDED = (1 << 0), - /* 1 while DMA in progress */ - PC_FLAG_DMA_IN_PROGRESS = (1 << 1), - /* 1 when encountered problem during DMA */ - PC_FLAG_DMA_ERROR = (1 << 2), - /* Data direction */ - PC_FLAG_WRITING = (1 << 3), - /* Suppress error reporting */ - PC_FLAG_SUPPRESS_ERROR = (1 << 4), -}; - /* format capacities descriptor codes */ #define CAPACITY_INVALID 0x00 #define CAPACITY_UNFORMATTED 0x01 @@ -131,11 +97,11 @@ typedef struct ide_floppy_obj { unsigned int openers; /* protected by BKL for now */ /* Current packet command */ - idefloppy_pc_t *pc; + struct ide_atapi_pc *pc; /* Last failed packet command */ - idefloppy_pc_t *failed_pc; + struct ide_atapi_pc *failed_pc; /* Packet command stack */ - idefloppy_pc_t pc_stack[IDEFLOPPY_PC_STACK]; + struct ide_atapi_pc pc_stack[IDEFLOPPY_PC_STACK]; /* Next free packet command storage space */ int pc_stack_index; struct request rq_stack[IDEFLOPPY_PC_STACK]; @@ -195,32 +161,6 @@ enum { #define IDEFLOPPY_ERROR_GENERAL 101 /* - * The following is used to format the general configuration word of the - * ATAPI IDENTIFY DEVICE command. - */ -struct idefloppy_id_gcw { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned packet_size :2; /* Packet Size */ - unsigned reserved234 :3; /* Reserved */ - unsigned drq_type :2; /* Command packet DRQ type */ - unsigned removable :1; /* Removable media */ - unsigned device_type :5; /* Device type */ - unsigned reserved13 :1; /* Reserved */ - unsigned protocol :2; /* Protocol type */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned protocol :2; /* Protocol type */ - unsigned reserved13 :1; /* Reserved */ - unsigned device_type :5; /* Device type */ - unsigned removable :1; /* Removable media */ - unsigned drq_type :2; /* Command packet DRQ type */ - unsigned reserved234 :3; /* Reserved */ - unsigned packet_size :2; /* Packet Size */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif -}; - -/* * Pages of the SELECT SENSE / MODE SENSE packet commands. * See SFF-8070i spec. */ @@ -256,27 +196,10 @@ static void ide_floppy_put(struct ide_floppy_obj *floppy) } /* - * Too bad. The drive wants to send us data which we are not ready to accept. - * Just throw it away. - */ -static void idefloppy_discard_data(ide_drive_t *drive, unsigned int bcount) -{ - while (bcount--) - (void) HWIF(drive)->INB(IDE_DATA_REG); -} - -static void idefloppy_write_zeros(ide_drive_t *drive, unsigned int bcount) -{ - while (bcount--) - HWIF(drive)->OUTB(0, IDE_DATA_REG); -} - - -/* * Used to finish servicing a request. For read/write requests, we will call * ide_end_request to pass to the next buffer. */ -static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs) +static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs) { idefloppy_floppy_t *floppy = drive->driver_data; struct request *rq = HWGROUP(drive)->rq; @@ -305,7 +228,7 @@ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs) return 0; } -static void ide_floppy_io_buffers(ide_drive_t *drive, idefloppy_pc_t *pc, +static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, unsigned int bcount, int direction) { struct request *rq = pc->rq; @@ -333,26 +256,26 @@ static void ide_floppy_io_buffers(ide_drive_t *drive, idefloppy_pc_t *pc, done += count; } - idefloppy_do_end_request(drive, 1, done >> 9); + idefloppy_end_request(drive, 1, done >> 9); if (bcount) { printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n", drive->name, __func__, bcount); if (direction) - idefloppy_write_zeros(drive, bcount); + ide_atapi_write_zeros(drive, bcount); else - idefloppy_discard_data(drive, bcount); - + ide_atapi_discard_data(drive, bcount); } } -static void idefloppy_update_buffers(ide_drive_t *drive, idefloppy_pc_t *pc) +static void idefloppy_update_buffers(ide_drive_t *drive, + struct ide_atapi_pc *pc) { struct request *rq = pc->rq; struct bio *bio = rq->bio; while ((bio = rq->bio) != NULL) - idefloppy_do_end_request(drive, 1, 0); + idefloppy_end_request(drive, 1, 0); } /* @@ -360,7 +283,7 @@ static void idefloppy_update_buffers(ide_drive_t *drive, idefloppy_pc_t *pc) * the current request so that it will be processed immediately, on the next * pass through the driver. */ -static void idefloppy_queue_pc_head(ide_drive_t *drive, idefloppy_pc_t *pc, +static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, struct request *rq) { struct ide_floppy_obj *floppy = drive->driver_data; @@ -372,7 +295,7 @@ static void idefloppy_queue_pc_head(ide_drive_t *drive, idefloppy_pc_t *pc, (void) ide_do_drive_cmd(drive, rq, ide_preempt); } -static idefloppy_pc_t *idefloppy_next_pc_storage(ide_drive_t *drive) +static struct ide_atapi_pc *idefloppy_next_pc_storage(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; @@ -393,7 +316,7 @@ static struct request *idefloppy_next_rq_storage(ide_drive_t *drive) static void idefloppy_request_sense_callback(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - u8 *buf = floppy->pc->buffer; + u8 *buf = floppy->pc->buf; debug_log("Reached %s\n", __func__); @@ -418,11 +341,11 @@ static void idefloppy_request_sense_callback(ide_drive_t *drive) floppy->ascq); - idefloppy_do_end_request(drive, 1, 0); + idefloppy_end_request(drive, 1, 0); } else { printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting" " request!\n"); - idefloppy_do_end_request(drive, 0, 0); + idefloppy_end_request(drive, 0, 0); } } @@ -433,27 +356,27 @@ static void idefloppy_pc_callback(ide_drive_t *drive) debug_log("Reached %s\n", __func__); - idefloppy_do_end_request(drive, floppy->pc->error ? 0 : 1, 0); + idefloppy_end_request(drive, floppy->pc->error ? 0 : 1, 0); } -static void idefloppy_init_pc(idefloppy_pc_t *pc) +static void idefloppy_init_pc(struct ide_atapi_pc *pc) { memset(pc->c, 0, 12); pc->retries = 0; pc->flags = 0; - pc->request_transfer = 0; - pc->buffer = pc->pc_buffer; - pc->buffer_size = IDEFLOPPY_PC_BUFFER_SIZE; - pc->callback = &idefloppy_pc_callback; + pc->req_xfer = 0; + pc->buf = pc->pc_buf; + pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE; + pc->idefloppy_callback = &idefloppy_pc_callback; } -static void idefloppy_create_request_sense_cmd(idefloppy_pc_t *pc) +static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc) { idefloppy_init_pc(pc); pc->c[0] = GPCMD_REQUEST_SENSE; pc->c[4] = 255; - pc->request_transfer = 18; - pc->callback = &idefloppy_request_sense_callback; + pc->req_xfer = 18; + pc->idefloppy_callback = &idefloppy_request_sense_callback; } /* @@ -462,7 +385,7 @@ static void idefloppy_create_request_sense_cmd(idefloppy_pc_t *pc) */ static void idefloppy_retry_pc(ide_drive_t *drive) { - idefloppy_pc_t *pc; + struct ide_atapi_pc *pc; struct request *rq; (void)ide_read_error(drive); @@ -473,11 +396,11 @@ static void idefloppy_retry_pc(ide_drive_t *drive) } /* The usual interrupt handler called during a packet command. */ -static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) +static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; ide_hwif_t *hwif = drive->hwif; - idefloppy_pc_t *pc = floppy->pc; + struct ide_atapi_pc *pc = floppy->pc; struct request *rq = pc->rq; xfer_func_t *xferfunc; unsigned int temp; @@ -488,13 +411,13 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) debug_log("Reached %s interrupt handler\n", __func__); if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - dma_error = hwif->ide_dma_end(drive); + dma_error = hwif->dma_ops->dma_end(drive); if (dma_error) { printk(KERN_ERR "%s: DMA %s error\n", drive->name, rq_data_dir(rq) ? "write" : "read"); pc->flags |= PC_FLAG_DMA_ERROR; } else { - pc->actually_transferred = pc->request_transfer; + pc->xferred = pc->req_xfer; idefloppy_update_buffers(drive, pc); } debug_log("DMA finished\n"); @@ -506,7 +429,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) /* No more interrupts */ if ((stat & DRQ_STAT) == 0) { debug_log("Packet command completed, %d bytes transferred\n", - pc->actually_transferred); + pc->xferred); pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); @@ -529,7 +452,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) if (floppy->failed_pc == pc) floppy->failed_pc = NULL; /* Command finished - Call the callback function */ - pc->callback(drive); + pc->idefloppy_callback(drive); return ide_stopped; } @@ -542,10 +465,10 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) } /* Get the number of bytes to transfer */ - bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) | - hwif->INB(IDE_BCOUNTL_REG); + bcount = (hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]) << 8) | + hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]); /* on this interrupt */ - ireason = hwif->INB(IDE_IREASON_REG); + ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); if (ireason & CD) { printk(KERN_ERR "ide-floppy: CoD != 0 in %s\n", __func__); @@ -561,13 +484,13 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) } if (!(pc->flags & PC_FLAG_WRITING)) { /* Reading - Check that we have enough space */ - temp = pc->actually_transferred + bcount; - if (temp > pc->request_transfer) { - if (temp > pc->buffer_size) { + temp = pc->xferred + bcount; + if (temp > pc->req_xfer) { + if (temp > pc->buf_size) { printk(KERN_ERR "ide-floppy: The floppy wants " "to send us more data than expected " "- discarding data\n"); - idefloppy_discard_data(drive, bcount); + ide_atapi_discard_data(drive, bcount); ide_set_handler(drive, &idefloppy_pc_intr, @@ -584,15 +507,15 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) else xferfunc = hwif->atapi_input_bytes; - if (pc->buffer) - xferfunc(drive, pc->current_position, bcount); + if (pc->buf) + xferfunc(drive, pc->cur_pos, bcount); else ide_floppy_io_buffers(drive, pc, bcount, !!(pc->flags & PC_FLAG_WRITING)); /* Update the current position */ - pc->actually_transferred += bcount; - pc->current_position += bcount; + pc->xferred += bcount; + pc->cur_pos += bcount; /* And set the interrupt handler again */ ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); @@ -606,6 +529,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) */ static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; ide_startstop_t startstop; idefloppy_floppy_t *floppy = drive->driver_data; u8 ireason; @@ -615,7 +539,7 @@ static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive) "initiated yet DRQ isn't asserted\n"); return startstop; } - ireason = drive->hwif->INB(IDE_IREASON_REG); + ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); if ((ireason & CD) == 0 || (ireason & IO)) { printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while " "issuing a packet command\n"); @@ -652,6 +576,7 @@ static int idefloppy_transfer_pc2(ide_drive_t *drive) static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; idefloppy_floppy_t *floppy = drive->driver_data; ide_startstop_t startstop; u8 ireason; @@ -661,7 +586,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) "initiated yet DRQ isn't asserted\n"); return startstop; } - ireason = drive->hwif->INB(IDE_IREASON_REG); + ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); if ((ireason & CD) == 0 || (ireason & IO)) { printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) " "while issuing a packet command\n"); @@ -682,7 +607,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) } static void ide_floppy_report_error(idefloppy_floppy_t *floppy, - idefloppy_pc_t *pc) + struct ide_atapi_pc *pc) { /* supress error messages resulting from Medium not present */ if (floppy->sense_key == 0x02 && @@ -698,7 +623,7 @@ static void ide_floppy_report_error(idefloppy_floppy_t *floppy, } static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, - idefloppy_pc_t *pc) + struct ide_atapi_pc *pc) { idefloppy_floppy_t *floppy = drive->driver_data; ide_hwif_t *hwif = drive->hwif; @@ -719,7 +644,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, pc->error = IDEFLOPPY_ERROR_GENERAL; floppy->failed_pc = NULL; - pc->callback(drive); + pc->idefloppy_callback(drive); return ide_stopped; } @@ -727,9 +652,9 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, pc->retries++; /* We haven't transferred any data yet */ - pc->actually_transferred = 0; - pc->current_position = pc->buffer; - bcount = min(pc->request_transfer, 63 * 1024); + pc->xferred = 0; + pc->cur_pos = pc->buf; + bcount = min(pc->req_xfer, 63 * 1024); if (pc->flags & PC_FLAG_DMA_ERROR) { pc->flags &= ~PC_FLAG_DMA_ERROR; @@ -738,7 +663,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, dma = 0; if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) - dma = !hwif->dma_setup(drive); + dma = !hwif->dma_ops->dma_setup(drive); ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | IDE_TFLAG_OUT_DEVICE, bcount, dma); @@ -746,7 +671,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, if (dma) { /* Begin DMA, if necessary */ pc->flags |= PC_FLAG_DMA_IN_PROGRESS; - hwif->dma_start(drive); + hwif->dma_ops->dma_start(drive); } /* Can we transfer the packet when we get the interrupt or wait? */ @@ -757,7 +682,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, /* immediate */ pkt_xfer_routine = &idefloppy_transfer_pc; } - + if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) { /* Issue the packet command */ ide_execute_command(drive, WIN_PACKETCMD, @@ -767,7 +692,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, return ide_started; } else { /* Issue the packet command */ - HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); + hwif->OUTB(WIN_PACKETCMD, hwif->io_ports[IDE_COMMAND_OFFSET]); return (*pkt_xfer_routine) (drive); } } @@ -776,11 +701,11 @@ static void idefloppy_rw_callback(ide_drive_t *drive) { debug_log("Reached %s\n", __func__); - idefloppy_do_end_request(drive, 1, 0); + idefloppy_end_request(drive, 1, 0); return; } -static void idefloppy_create_prevent_cmd(idefloppy_pc_t *pc, int prevent) +static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent) { debug_log("creating prevent removal command, prevent = %d\n", prevent); @@ -789,39 +714,39 @@ static void idefloppy_create_prevent_cmd(idefloppy_pc_t *pc, int prevent) pc->c[4] = prevent; } -static void idefloppy_create_read_capacity_cmd(idefloppy_pc_t *pc) +static void idefloppy_create_read_capacity_cmd(struct ide_atapi_pc *pc) { idefloppy_init_pc(pc); pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES; pc->c[7] = 255; pc->c[8] = 255; - pc->request_transfer = 255; + pc->req_xfer = 255; } -static void idefloppy_create_format_unit_cmd(idefloppy_pc_t *pc, int b, int l, - int flags) +static void idefloppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b, + int l, int flags) { idefloppy_init_pc(pc); pc->c[0] = GPCMD_FORMAT_UNIT; pc->c[1] = 0x17; - memset(pc->buffer, 0, 12); - pc->buffer[1] = 0xA2; + memset(pc->buf, 0, 12); + pc->buf[1] = 0xA2; /* Default format list header, u8 1: FOV/DCRT/IMM bits set */ if (flags & 1) /* Verify bit on... */ - pc->buffer[1] ^= 0x20; /* ... turn off DCRT bit */ - pc->buffer[3] = 8; + pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */ + pc->buf[3] = 8; - put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buffer[4])); - put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buffer[8])); - pc->buffer_size = 12; + put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4])); + put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8])); + pc->buf_size = 12; pc->flags |= PC_FLAG_WRITING; } /* A mode sense command is used to "sense" floppy parameters. */ -static void idefloppy_create_mode_sense_cmd(idefloppy_pc_t *pc, u8 page_code, - u8 type) +static void idefloppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, + u8 page_code, u8 type) { u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */ @@ -842,24 +767,24 @@ static void idefloppy_create_mode_sense_cmd(idefloppy_pc_t *pc, u8 page_code, "in create_mode_sense_cmd\n"); } put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]); - pc->request_transfer = length; + pc->req_xfer = length; } -static void idefloppy_create_start_stop_cmd(idefloppy_pc_t *pc, int start) +static void idefloppy_create_start_stop_cmd(struct ide_atapi_pc *pc, int start) { idefloppy_init_pc(pc); pc->c[0] = GPCMD_START_STOP_UNIT; pc->c[4] = start; } -static void idefloppy_create_test_unit_ready_cmd(idefloppy_pc_t *pc) +static void idefloppy_create_test_unit_ready_cmd(struct ide_atapi_pc *pc) { idefloppy_init_pc(pc); pc->c[0] = GPCMD_TEST_UNIT_READY; } static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, - idefloppy_pc_t *pc, struct request *rq, + struct ide_atapi_pc *pc, struct request *rq, unsigned long sector) { int block = sector / floppy->bs_factor; @@ -874,41 +799,41 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]); put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]); - pc->callback = &idefloppy_rw_callback; + pc->idefloppy_callback = &idefloppy_rw_callback; pc->rq = rq; pc->b_count = cmd == READ ? 0 : rq->bio->bi_size; if (rq->cmd_flags & REQ_RW) pc->flags |= PC_FLAG_WRITING; - pc->buffer = NULL; - pc->request_transfer = pc->buffer_size = blocks * floppy->block_size; + pc->buf = NULL; + pc->req_xfer = pc->buf_size = blocks * floppy->block_size; pc->flags |= PC_FLAG_DMA_RECOMMENDED; } static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, - idefloppy_pc_t *pc, struct request *rq) + struct ide_atapi_pc *pc, struct request *rq) { idefloppy_init_pc(pc); - pc->callback = &idefloppy_rw_callback; + pc->idefloppy_callback = &idefloppy_rw_callback; memcpy(pc->c, rq->cmd, sizeof(pc->c)); pc->rq = rq; pc->b_count = rq->data_len; if (rq->data_len && rq_data_dir(rq) == WRITE) pc->flags |= PC_FLAG_WRITING; - pc->buffer = rq->data; + pc->buf = rq->data; if (rq->bio) pc->flags |= PC_FLAG_DMA_RECOMMENDED; /* * possibly problematic, doesn't look like ide-floppy correctly * handled scattered requests if dma fails... */ - pc->request_transfer = pc->buffer_size = rq->data_len; + pc->req_xfer = pc->buf_size = rq->data_len; } static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, struct request *rq, sector_t block_s) { idefloppy_floppy_t *floppy = drive->driver_data; - idefloppy_pc_t *pc; + struct ide_atapi_pc *pc; unsigned long block = (unsigned long)block_s; debug_log("dev: %s, cmd_type: %x, errors: %d\n", @@ -924,7 +849,7 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, else printk(KERN_ERR "ide-floppy: %s: I/O error\n", drive->name); - idefloppy_do_end_request(drive, 0, 0); + idefloppy_end_request(drive, 0, 0); return ide_stopped; } if (blk_fs_request(rq)) { @@ -932,20 +857,20 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, (rq->nr_sectors % floppy->bs_factor)) { printk(KERN_ERR "%s: unsupported r/w request size\n", drive->name); - idefloppy_do_end_request(drive, 0, 0); + idefloppy_end_request(drive, 0, 0); return ide_stopped; } pc = idefloppy_next_pc_storage(drive); idefloppy_create_rw_cmd(floppy, pc, rq, block); } else if (blk_special_request(rq)) { - pc = (idefloppy_pc_t *) rq->buffer; + pc = (struct ide_atapi_pc *) rq->buffer; } else if (blk_pc_request(rq)) { pc = idefloppy_next_pc_storage(drive); idefloppy_blockpc_cmd(floppy, pc, rq); } else { blk_dump_rq_flags(rq, "ide-floppy: unsupported command in queue"); - idefloppy_do_end_request(drive, 0, 0); + idefloppy_end_request(drive, 0, 0); return ide_stopped; } @@ -957,7 +882,7 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, * Add a special packet command request to the tail of the request queue, * and wait for it to be serviced. */ -static int idefloppy_queue_pc_tail(ide_drive_t *drive, idefloppy_pc_t *pc) +static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct ide_floppy_obj *floppy = drive->driver_data; struct request rq; @@ -977,7 +902,7 @@ static int idefloppy_queue_pc_tail(ide_drive_t *drive, idefloppy_pc_t *pc) static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - idefloppy_pc_t pc; + struct ide_atapi_pc pc; u8 *page; int capacity, lba_capacity; u16 transfer_rate, sector_size, cyls, rpm; @@ -991,16 +916,16 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) " parameters\n"); return 1; } - floppy->wp = !!(pc.buffer[3] & 0x80); + floppy->wp = !!(pc.buf[3] & 0x80); set_disk_ro(floppy->disk, floppy->wp); - page = &pc.buffer[8]; + page = &pc.buf[8]; - transfer_rate = be16_to_cpu(*(u16 *)&pc.buffer[8 + 2]); - sector_size = be16_to_cpu(*(u16 *)&pc.buffer[8 + 6]); - cyls = be16_to_cpu(*(u16 *)&pc.buffer[8 + 8]); - rpm = be16_to_cpu(*(u16 *)&pc.buffer[8 + 28]); - heads = pc.buffer[8 + 4]; - sectors = pc.buffer[8 + 5]; + transfer_rate = be16_to_cpu(*(u16 *)&pc.buf[8 + 2]); + sector_size = be16_to_cpu(*(u16 *)&pc.buf[8 + 6]); + cyls = be16_to_cpu(*(u16 *)&pc.buf[8 + 8]); + rpm = be16_to_cpu(*(u16 *)&pc.buf[8 + 28]); + heads = pc.buf[8 + 4]; + sectors = pc.buf[8 + 5]; capacity = cyls * heads * sectors * sector_size; @@ -1029,7 +954,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) static int idefloppy_get_sfrp_bit(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - idefloppy_pc_t pc; + struct ide_atapi_pc pc; floppy->srfp = 0; idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE, @@ -1039,7 +964,7 @@ static int idefloppy_get_sfrp_bit(ide_drive_t *drive) if (idefloppy_queue_pc_tail(drive, &pc)) return 1; - floppy->srfp = pc.buffer[8 + 2] & 0x40; + floppy->srfp = pc.buf[8 + 2] & 0x40; return (0); } @@ -1050,7 +975,7 @@ static int idefloppy_get_sfrp_bit(ide_drive_t *drive) static int ide_floppy_get_capacity(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - idefloppy_pc_t pc; + struct ide_atapi_pc pc; u8 *cap_desc; u8 header_len, desc_cnt; int i, rc = 1, blocks, length; @@ -1066,15 +991,15 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); return 1; } - header_len = pc.buffer[3]; - cap_desc = &pc.buffer[4]; + header_len = pc.buf[3]; + cap_desc = &pc.buf[4]; desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ for (i = 0; i < desc_cnt; i++) { unsigned int desc_start = 4 + i*8; - blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]); - length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]); + blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]); + length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]); debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", i, blocks * length / 1024, blocks, length); @@ -1085,7 +1010,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) * the code below is valid only for the 1st descriptor, ie i=0 */ - switch (pc.buffer[desc_start + 4] & 0x03) { + switch (pc.buf[desc_start + 4] & 0x03) { /* Clik! drive returns this instead of CAPACITY_CURRENT */ case CAPACITY_UNFORMATTED: if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) @@ -1130,7 +1055,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) break; } debug_log("Descriptor 0 Code: %d\n", - pc.buffer[desc_start + 4] & 0x03); + pc.buf[desc_start + 4] & 0x03); } /* Clik! disk does not support get_flexible_disk_page */ @@ -1162,7 +1087,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) { - idefloppy_pc_t pc; + struct ide_atapi_pc pc; u8 header_len, desc_cnt; int i, blocks, length, u_array_size, u_index; int __user *argp; @@ -1178,7 +1103,7 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); return (-EIO); } - header_len = pc.buffer[3]; + header_len = pc.buf[3]; desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ u_index = 0; @@ -1195,8 +1120,8 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) if (u_index >= u_array_size) break; /* User-supplied buffer too small */ - blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]); - length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]); + blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]); + length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]); if (put_user(blocks, argp)) return(-EFAULT); @@ -1227,7 +1152,7 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg) { idefloppy_floppy_t *floppy = drive->driver_data; - idefloppy_pc_t pc; + struct ide_atapi_pc pc; int progress_indication = 0x10000; if (floppy->srfp) { @@ -1271,33 +1196,39 @@ static sector_t idefloppy_capacity(ide_drive_t *drive) */ static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id) { - struct idefloppy_id_gcw gcw; + u8 gcw[2]; + u8 device_type, protocol, removable, drq_type, packet_size; *((u16 *) &gcw) = id->config; + device_type = gcw[1] & 0x1F; + removable = (gcw[0] & 0x80) >> 7; + protocol = (gcw[1] & 0xC0) >> 6; + drq_type = (gcw[0] & 0x60) >> 5; + packet_size = gcw[0] & 0x03; + #ifdef CONFIG_PPC /* kludge for Apple PowerBook internal zip */ - if ((gcw.device_type == 5) && - !strstr(id->model, "CD-ROM") && - strstr(id->model, "ZIP")) - gcw.device_type = 0; + if (device_type == 5 && + !strstr(id->model, "CD-ROM") && strstr(id->model, "ZIP")) + device_type = 0; #endif - if (gcw.protocol != 2) + if (protocol != 2) printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n", - gcw.protocol); - else if (gcw.device_type != 0) + protocol); + else if (device_type != 0) printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set " - "to floppy\n", gcw.device_type); - else if (!gcw.removable) + "to floppy\n", device_type); + else if (!removable) printk(KERN_ERR "ide-floppy: The removable flag is not set\n"); - else if (gcw.drq_type == 3) { + else if (drq_type == 3) printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not " - "supported\n", gcw.drq_type); - } else if (gcw.packet_size != 0) { + "supported\n", drq_type); + else if (packet_size != 0) printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 " - "bytes long\n", gcw.packet_size); - } else + "bytes\n", packet_size); + else return 1; return 0; } @@ -1322,11 +1253,12 @@ static inline void idefloppy_add_settings(ide_drive_t *drive) { ; } static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy) { - struct idefloppy_id_gcw gcw; + u8 gcw[2]; *((u16 *) &gcw) = drive->id->config; floppy->pc = floppy->pc_stack; - if (gcw.drq_type == 1) + + if (((gcw[0] & 0x60) >> 5) == 1) floppy->flags |= IDEFLOPPY_FLAG_DRQ_INTERRUPT; /* * We used to check revisions here. At this point however I'm giving up. @@ -1413,7 +1345,7 @@ static ide_driver_t idefloppy_driver = { .media = ide_floppy, .supports_dsc_overlap = 0, .do_request = idefloppy_do_request, - .end_request = idefloppy_do_end_request, + .end_request = idefloppy_end_request, .error = __ide_error, .abort = __ide_abort, #ifdef CONFIG_IDE_PROC_FS @@ -1426,7 +1358,7 @@ static int idefloppy_open(struct inode *inode, struct file *filp) struct gendisk *disk = inode->i_bdev->bd_disk; struct ide_floppy_obj *floppy; ide_drive_t *drive; - idefloppy_pc_t pc; + struct ide_atapi_pc pc; int ret = 0; debug_log("Reached %s\n", __func__); @@ -1489,7 +1421,7 @@ static int idefloppy_release(struct inode *inode, struct file *filp) struct gendisk *disk = inode->i_bdev->bd_disk; struct ide_floppy_obj *floppy = ide_floppy_g(disk); ide_drive_t *drive = floppy->drive; - idefloppy_pc_t pc; + struct ide_atapi_pc pc; debug_log("Reached %s\n", __func__); @@ -1521,8 +1453,8 @@ static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo) return 0; } -static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, - unsigned long arg, unsigned int cmd) +static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy, + struct ide_atapi_pc *pc, unsigned long arg, unsigned int cmd) { if (floppy->openers > 1) return -EBUSY; @@ -1551,7 +1483,7 @@ static int ide_floppy_format_unit(idefloppy_floppy_t *floppy, int __user *arg) { int blocks, length, flags, err = 0; - idefloppy_pc_t pc; + struct ide_atapi_pc pc; if (floppy->openers > 1) { /* Don't format if someone is using the disk */ @@ -1602,7 +1534,7 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file, struct block_device *bdev = inode->i_bdev; struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk); ide_drive_t *drive = floppy->drive; - idefloppy_pc_t pc; + struct ide_atapi_pc pc; void __user *argp = (void __user *)arg; int err; @@ -1664,13 +1596,13 @@ static int idefloppy_revalidate_disk(struct gendisk *disk) } static struct block_device_operations idefloppy_ops = { - .owner = THIS_MODULE, - .open = idefloppy_open, - .release = idefloppy_release, - .ioctl = idefloppy_ioctl, - .getgeo = idefloppy_getgeo, - .media_changed = idefloppy_media_changed, - .revalidate_disk= idefloppy_revalidate_disk + .owner = THIS_MODULE, + .open = idefloppy_open, + .release = idefloppy_release, + .ioctl = idefloppy_ioctl, + .getgeo = idefloppy_getgeo, + .media_changed = idefloppy_media_changed, + .revalidate_disk = idefloppy_revalidate_disk }; static int ide_floppy_probe(ide_drive_t *drive) diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index 9ebec08eefd9..a6073e248f45 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -1,33 +1,142 @@ /* * generic/default IDE host driver * - * Copyright (C) 2004 Bartlomiej Zolnierkiewicz + * Copyright (C) 2004, 2008 Bartlomiej Zolnierkiewicz * This code was split off from ide.c. See it for original copyrights. * * May be copied or modified under the terms of the GNU General Public License. */ +/* + * For special cases new interfaces may be added using sysfs, i.e. + * + * echo -n "0x168:0x36e:10" > /sys/class/ide_generic/add + * + * will add an interface using I/O ports 0x168-0x16f/0x36e and IRQ 10. + */ + #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> #include <linux/ide.h> +#define DRV_NAME "ide_generic" + +static ssize_t store_add(struct class *cls, const char *buf, size_t n) +{ + ide_hwif_t *hwif; + unsigned int base, ctl; + int irq; + hw_regs_t hw; + u8 idx[] = { 0xff, 0xff, 0xff, 0xff }; + + if (sscanf(buf, "%x:%x:%d", &base, &ctl, &irq) != 3) + return -EINVAL; + + hwif = ide_find_port(); + if (hwif == NULL) + return -ENOENT; + + memset(&hw, 0, sizeof(hw)); + ide_std_init_ports(&hw, base, ctl); + hw.irq = irq; + hw.chipset = ide_generic; + + ide_init_port_hw(hwif, &hw); + + idx[0] = hwif->index; + + ide_device_add(idx, NULL); + + return n; +}; + +static struct class_attribute ide_generic_class_attrs[] = { + __ATTR(add, S_IWUSR, NULL, store_add), + __ATTR_NULL +}; + +static void ide_generic_class_release(struct class *cls) +{ + kfree(cls); +} + +static int __init ide_generic_sysfs_init(void) +{ + struct class *cls; + int rc; + + cls = kzalloc(sizeof(*cls), GFP_KERNEL); + if (!cls) + return -ENOMEM; + + cls->name = DRV_NAME; + cls->owner = THIS_MODULE; + cls->class_release = ide_generic_class_release; + cls->class_attrs = ide_generic_class_attrs; + + rc = class_register(cls); + if (rc) { + kfree(cls); + return rc; + } + + return 0; +} + static int __init ide_generic_init(void) { u8 idx[MAX_HWIFS]; int i; for (i = 0; i < MAX_HWIFS; i++) { - ide_hwif_t *hwif = &ide_hwifs[i]; + ide_hwif_t *hwif; + unsigned long io_addr = ide_default_io_base(i); + hw_regs_t hw; + + idx[i] = 0xff; + + if (io_addr) { + if (!request_region(io_addr, 8, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX " + "not free.\n", + DRV_NAME, io_addr, io_addr + 7); + continue; + } + + if (!request_region(io_addr + 0x206, 1, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX " + "not free.\n", + DRV_NAME, io_addr + 0x206); + release_region(io_addr, 8); + continue; + } + + /* + * Skip probing if the corresponding + * slot is already occupied. + */ + hwif = ide_find_port(); + if (hwif == NULL || hwif->index != i) { + idx[i] = 0xff; + continue; + } + + memset(&hw, 0, sizeof(hw)); + ide_std_init_ports(&hw, io_addr, io_addr + 0x206); + hw.irq = ide_default_irq(io_addr); + ide_init_port_hw(hwif, &hw); - if (hwif->io_ports[IDE_DATA_OFFSET] && !hwif->present) idx[i] = i; - else - idx[i] = 0xff; + } } ide_device_add_all(idx, NULL); + if (ide_generic_sysfs_init()) + printk(KERN_ERR DRV_NAME ": failed to create ide_generic " + "class\n"); + return 0; } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 715379605a7b..0fe89a599275 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -218,7 +218,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * * we could be smarter and check for current xfer_speed * in struct drive etc... */ - if (drive->hwif->dma_host_set == NULL) + if (drive->hwif->dma_ops == NULL) break; /* * TODO: respect ->using_dma setting @@ -301,39 +301,45 @@ void ide_tf_read(ide_drive_t *drive, ide_task_t *task) struct ide_taskfile *tf = &task->tf; if (task->tf_flags & IDE_TFLAG_IN_DATA) { - u16 data = hwif->INW(IDE_DATA_REG); + u16 data = hwif->INW(hwif->io_ports[IDE_DATA_OFFSET]); tf->data = data & 0xff; tf->hob_data = (data >> 8) & 0xff; } /* be sure we're looking at the low order bits */ - hwif->OUTB(drive->ctl & ~0x80, IDE_CONTROL_REG); + hwif->OUTB(drive->ctl & ~0x80, hwif->io_ports[IDE_CONTROL_OFFSET]); if (task->tf_flags & IDE_TFLAG_IN_NSECT) - tf->nsect = hwif->INB(IDE_NSECTOR_REG); + tf->nsect = hwif->INB(hwif->io_ports[IDE_NSECTOR_OFFSET]); if (task->tf_flags & IDE_TFLAG_IN_LBAL) - tf->lbal = hwif->INB(IDE_SECTOR_REG); + tf->lbal = hwif->INB(hwif->io_ports[IDE_SECTOR_OFFSET]); if (task->tf_flags & IDE_TFLAG_IN_LBAM) - tf->lbam = hwif->INB(IDE_LCYL_REG); + tf->lbam = hwif->INB(hwif->io_ports[IDE_LCYL_OFFSET]); if (task->tf_flags & IDE_TFLAG_IN_LBAH) - tf->lbah = hwif->INB(IDE_HCYL_REG); + tf->lbah = hwif->INB(hwif->io_ports[IDE_HCYL_OFFSET]); if (task->tf_flags & IDE_TFLAG_IN_DEVICE) - tf->device = hwif->INB(IDE_SELECT_REG); + tf->device = hwif->INB(hwif->io_ports[IDE_SELECT_OFFSET]); if (task->tf_flags & IDE_TFLAG_LBA48) { - hwif->OUTB(drive->ctl | 0x80, IDE_CONTROL_REG); + hwif->OUTB(drive->ctl | 0x80, + hwif->io_ports[IDE_CONTROL_OFFSET]); if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) - tf->hob_feature = hwif->INB(IDE_FEATURE_REG); + tf->hob_feature = + hwif->INB(hwif->io_ports[IDE_FEATURE_OFFSET]); if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT) - tf->hob_nsect = hwif->INB(IDE_NSECTOR_REG); + tf->hob_nsect = + hwif->INB(hwif->io_ports[IDE_NSECTOR_OFFSET]); if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL) - tf->hob_lbal = hwif->INB(IDE_SECTOR_REG); + tf->hob_lbal = + hwif->INB(hwif->io_ports[IDE_SECTOR_OFFSET]); if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM) - tf->hob_lbam = hwif->INB(IDE_LCYL_REG); + tf->hob_lbam = + hwif->INB(hwif->io_ports[IDE_LCYL_OFFSET]); if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH) - tf->hob_lbah = hwif->INB(IDE_HCYL_REG); + tf->hob_lbah = + hwif->INB(hwif->io_ports[IDE_HCYL_OFFSET]); } } @@ -448,7 +454,8 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 if (err == ABRT_ERR) { if (drive->select.b.lba && /* some newer drives don't support WIN_SPECIFY */ - hwif->INB(IDE_COMMAND_REG) == WIN_SPECIFY) + hwif->INB(hwif->io_ports[IDE_COMMAND_OFFSET]) == + WIN_SPECIFY) return ide_stopped; } else if ((err & BAD_CRC) == BAD_CRC) { /* UDMA crc error, just retry the operation */ @@ -500,7 +507,8 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT)) /* force an abort */ - hwif->OUTB(WIN_IDLEIMMEDIATE, IDE_COMMAND_REG); + hwif->OUTB(WIN_IDLEIMMEDIATE, + hwif->io_ports[IDE_COMMAND_OFFSET]); if (rq->errors >= ERROR_MAX) { ide_kill_rq(drive, rq); @@ -713,15 +721,12 @@ static ide_startstop_t do_special (ide_drive_t *drive) #endif if (s->b.set_tune) { ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; u8 req_pio = drive->tune_req; s->b.set_tune = 0; if (set_pio_mode_abuse(drive->hwif, req_pio)) { - - if (hwif->set_pio_mode == NULL) - return ide_stopped; - /* * take ide_lock for drive->[no_]unmask/[no_]io_32bit */ @@ -729,10 +734,10 @@ static ide_startstop_t do_special (ide_drive_t *drive) unsigned long flags; spin_lock_irqsave(&ide_lock, flags); - hwif->set_pio_mode(drive, req_pio); + port_ops->set_pio_mode(drive, req_pio); spin_unlock_irqrestore(&ide_lock, flags); } else - hwif->set_pio_mode(drive, req_pio); + port_ops->set_pio_mode(drive, req_pio); } else { int keep_dma = drive->using_dma; @@ -1233,12 +1238,12 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) if (error < 0) { printk(KERN_WARNING "%s: DMA timeout error\n", drive->name); - (void)HWIF(drive)->ide_dma_end(drive); + (void)hwif->dma_ops->dma_end(drive); ret = ide_error(drive, "dma timeout error", ide_read_status(drive)); } else { printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name); - hwif->dma_timeout(drive); + hwif->dma_ops->dma_timeout(drive); } /* @@ -1350,7 +1355,7 @@ void ide_timer_expiry (unsigned long data) startstop = handler(drive); } else if (drive_is_ready(drive)) { if (drive->waiting_for_dma) - hwgroup->hwif->dma_lost_irq(drive); + hwif->dma_ops->dma_lost_irq(drive); (void)ide_ack_intr(hwif); printk(KERN_WARNING "%s: lost interrupt\n", drive->name); startstop = handler(drive); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index c419266234a7..98e7b5947fb3 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -158,15 +158,21 @@ EXPORT_SYMBOL(default_hwif_mmiops); void SELECT_DRIVE (ide_drive_t *drive) { - if (HWIF(drive)->selectproc) - HWIF(drive)->selectproc(drive); - HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG); + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (port_ops && port_ops->selectproc) + port_ops->selectproc(drive); + + hwif->OUTB(drive->select.all, hwif->io_ports[IDE_SELECT_OFFSET]); } void SELECT_MASK (ide_drive_t *drive, int mask) { - if (HWIF(drive)->maskproc) - HWIF(drive)->maskproc(drive, mask); + const struct ide_port_ops *port_ops = drive->hwif->port_ops; + + if (port_ops && port_ops->maskproc) + port_ops->maskproc(drive, mask); } /* @@ -194,15 +200,18 @@ static void ata_input_data(ide_drive_t *drive, void *buffer, u32 wcount) if (io_32bit) { if (io_32bit & 2) { unsigned long flags; + local_irq_save(flags); - ata_vlb_sync(drive, IDE_NSECTOR_REG); - hwif->INSL(IDE_DATA_REG, buffer, wcount); + ata_vlb_sync(drive, hwif->io_ports[IDE_NSECTOR_OFFSET]); + hwif->INSL(hwif->io_ports[IDE_DATA_OFFSET], buffer, + wcount); local_irq_restore(flags); } else - hwif->INSL(IDE_DATA_REG, buffer, wcount); - } else { - hwif->INSW(IDE_DATA_REG, buffer, wcount<<1); - } + hwif->INSL(hwif->io_ports[IDE_DATA_OFFSET], buffer, + wcount); + } else + hwif->INSW(hwif->io_ports[IDE_DATA_OFFSET], buffer, + wcount << 1); } /* @@ -216,15 +225,18 @@ static void ata_output_data(ide_drive_t *drive, void *buffer, u32 wcount) if (io_32bit) { if (io_32bit & 2) { unsigned long flags; + local_irq_save(flags); - ata_vlb_sync(drive, IDE_NSECTOR_REG); - hwif->OUTSL(IDE_DATA_REG, buffer, wcount); + ata_vlb_sync(drive, hwif->io_ports[IDE_NSECTOR_OFFSET]); + hwif->OUTSL(hwif->io_ports[IDE_DATA_OFFSET], buffer, + wcount); local_irq_restore(flags); } else - hwif->OUTSL(IDE_DATA_REG, buffer, wcount); - } else { - hwif->OUTSW(IDE_DATA_REG, buffer, wcount<<1); - } + hwif->OUTSL(hwif->io_ports[IDE_DATA_OFFSET], buffer, + wcount); + } else + hwif->OUTSW(hwif->io_ports[IDE_DATA_OFFSET], buffer, + wcount << 1); } /* @@ -243,13 +255,15 @@ static void atapi_input_bytes(ide_drive_t *drive, void *buffer, u32 bytecount) #if defined(CONFIG_ATARI) || defined(CONFIG_Q40) if (MACH_IS_ATARI || MACH_IS_Q40) { /* Atari has a byte-swapped IDE interface */ - insw_swapw(IDE_DATA_REG, buffer, bytecount / 2); + insw_swapw(hwif->io_ports[IDE_DATA_OFFSET], buffer, + bytecount / 2); return; } #endif /* CONFIG_ATARI || CONFIG_Q40 */ hwif->ata_input_data(drive, buffer, bytecount / 4); if ((bytecount & 0x03) >= 2) - hwif->INSW(IDE_DATA_REG, ((u8 *)buffer)+(bytecount & ~0x03), 1); + hwif->INSW(hwif->io_ports[IDE_DATA_OFFSET], + (u8 *)buffer + (bytecount & ~0x03), 1); } static void atapi_output_bytes(ide_drive_t *drive, void *buffer, u32 bytecount) @@ -260,13 +274,15 @@ static void atapi_output_bytes(ide_drive_t *drive, void *buffer, u32 bytecount) #if defined(CONFIG_ATARI) || defined(CONFIG_Q40) if (MACH_IS_ATARI || MACH_IS_Q40) { /* Atari has a byte-swapped IDE interface */ - outsw_swapw(IDE_DATA_REG, buffer, bytecount / 2); + outsw_swapw(hwif->io_ports[IDE_DATA_OFFSET], buffer, + bytecount / 2); return; } #endif /* CONFIG_ATARI || CONFIG_Q40 */ hwif->ata_output_data(drive, buffer, bytecount / 4); if ((bytecount & 0x03) >= 2) - hwif->OUTSW(IDE_DATA_REG, ((u8*)buffer)+(bytecount & ~0x03), 1); + hwif->OUTSW(hwif->io_ports[IDE_DATA_OFFSET], + (u8 *)buffer + (bytecount & ~0x03), 1); } void default_hwif_transport(ide_hwif_t *hwif) @@ -416,7 +432,7 @@ int drive_is_ready (ide_drive_t *drive) u8 stat = 0; if (drive->waiting_for_dma) - return hwif->ide_dma_test_irq(drive); + return hwif->dma_ops->dma_test_irq(drive); #if 0 /* need to guarantee 400ns since last command was issued */ @@ -429,7 +445,7 @@ int drive_is_ready (ide_drive_t *drive) * an interrupt with another pci card/device. We make no assumptions * about possible isa-pnp and pci-pnp issues yet. */ - if (IDE_CONTROL_REG) + if (hwif->io_ports[IDE_CONTROL_OFFSET]) stat = ide_read_altstatus(drive); else /* Note: this may clear a pending IRQ!! */ @@ -630,7 +646,7 @@ int ide_driveid_update(ide_drive_t *drive) SELECT_MASK(drive, 1); ide_set_irq(drive, 1); msleep(50); - hwif->OUTB(WIN_IDENTIFY, IDE_COMMAND_REG); + hwif->OUTB(WIN_IDENTIFY, hwif->io_ports[IDE_COMMAND_OFFSET]); timeout = jiffies + WAIT_WORSTCASE; do { if (time_after(jiffies, timeout)) { @@ -686,8 +702,8 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) // msleep(50); #ifdef CONFIG_BLK_DEV_IDEDMA - if (hwif->dma_host_set) /* check if host supports DMA */ - hwif->dma_host_set(drive, 0); + if (hwif->dma_ops) /* check if host supports DMA */ + hwif->dma_ops->dma_host_set(drive, 0); #endif /* Skip setting PIO flow-control modes on pre-EIDE drives */ @@ -717,9 +733,10 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) SELECT_MASK(drive, 0); udelay(1); ide_set_irq(drive, 0); - hwif->OUTB(speed, IDE_NSECTOR_REG); - hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG); - hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG); + hwif->OUTB(speed, hwif->io_ports[IDE_NSECTOR_OFFSET]); + hwif->OUTB(SETFEATURES_XFER, hwif->io_ports[IDE_FEATURE_OFFSET]); + hwif->OUTBSYNC(drive, WIN_SETFEATURES, + hwif->io_ports[IDE_COMMAND_OFFSET]); if (drive->quirk_list == 2) ide_set_irq(drive, 1); @@ -744,8 +761,8 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) #ifdef CONFIG_BLK_DEV_IDEDMA if ((speed >= XFER_SW_DMA_0 || (hwif->host_flags & IDE_HFLAG_VDMA)) && drive->using_dma) - hwif->dma_host_set(drive, 1); - else if (hwif->dma_host_set) /* check if host supports DMA */ + hwif->dma_ops->dma_host_set(drive, 1); + else if (hwif->dma_ops) /* check if host supports DMA */ ide_dma_off_quietly(drive); #endif @@ -827,7 +844,7 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler, spin_lock_irqsave(&ide_lock, flags); __ide_set_handler(drive, handler, timeout, expiry); - hwif->OUTBSYNC(drive, cmd, IDE_COMMAND_REG); + hwif->OUTBSYNC(drive, cmd, hwif->io_ports[IDE_COMMAND_OFFSET]); /* * Drive takes 400nS to respond, we must avoid the IRQ being * serviced before that. @@ -890,10 +907,11 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) { ide_hwgroup_t *hwgroup = HWGROUP(drive); ide_hwif_t *hwif = HWIF(drive); + const struct ide_port_ops *port_ops = hwif->port_ops; u8 tmp; - if (hwif->reset_poll != NULL) { - if (hwif->reset_poll(drive)) { + if (port_ops && port_ops->reset_poll) { + if (port_ops->reset_poll(drive)) { printk(KERN_ERR "%s: host reset_poll failure for %s.\n", hwif->name, drive->name); return ide_stopped; @@ -959,6 +977,8 @@ static void ide_disk_pre_reset(ide_drive_t *drive) static void pre_reset(ide_drive_t *drive) { + const struct ide_port_ops *port_ops = drive->hwif->port_ops; + if (drive->media == ide_disk) ide_disk_pre_reset(drive); else @@ -979,8 +999,8 @@ static void pre_reset(ide_drive_t *drive) return; } - if (HWIF(drive)->pre_reset != NULL) - HWIF(drive)->pre_reset(drive); + if (port_ops && port_ops->pre_reset) + port_ops->pre_reset(drive); if (drive->current_speed != 0xff) drive->desired_speed = drive->current_speed; @@ -1008,7 +1028,9 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) unsigned long flags; ide_hwif_t *hwif; ide_hwgroup_t *hwgroup; - + const struct ide_port_ops *port_ops; + u8 ctl; + spin_lock_irqsave(&ide_lock, flags); hwif = HWIF(drive); hwgroup = HWGROUP(drive); @@ -1022,7 +1044,8 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) pre_reset(drive); SELECT_DRIVE(drive); udelay (20); - hwif->OUTBSYNC(drive, WIN_SRST, IDE_COMMAND_REG); + hwif->OUTBSYNC(drive, WIN_SRST, + hwif->io_ports[IDE_COMMAND_OFFSET]); ndelay(400); hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; hwgroup->polling = 1; @@ -1038,7 +1061,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) for (unit = 0; unit < MAX_DRIVES; ++unit) pre_reset(&hwif->drives[unit]); - if (!IDE_CONTROL_REG) { + if (hwif->io_ports[IDE_CONTROL_OFFSET] == 0) { spin_unlock_irqrestore(&ide_lock, flags); return ide_stopped; } @@ -1053,16 +1076,14 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) * recover from reset very quickly, saving us the first 50ms wait time. */ /* set SRST and nIEN */ - hwif->OUTBSYNC(drive, drive->ctl|6,IDE_CONTROL_REG); + hwif->OUTBSYNC(drive, drive->ctl|6, hwif->io_ports[IDE_CONTROL_OFFSET]); /* more than enough time */ udelay(10); - if (drive->quirk_list == 2) { - /* clear SRST and nIEN */ - hwif->OUTBSYNC(drive, drive->ctl, IDE_CONTROL_REG); - } else { - /* clear SRST, leave nIEN */ - hwif->OUTBSYNC(drive, drive->ctl|2, IDE_CONTROL_REG); - } + if (drive->quirk_list == 2) + ctl = drive->ctl; /* clear SRST and nIEN */ + else + ctl = drive->ctl | 2; /* clear SRST, leave nIEN */ + hwif->OUTBSYNC(drive, ctl, hwif->io_ports[IDE_CONTROL_OFFSET]); /* more than enough time */ udelay(10); hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; @@ -1074,8 +1095,9 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) * state when the disks are reset this way. At least, the Winbond * 553 documentation says that */ - if (hwif->resetproc) - hwif->resetproc(drive); + port_ops = hwif->port_ops; + if (port_ops && port_ops->resetproc) + port_ops->resetproc(drive); spin_unlock_irqrestore(&ide_lock, flags); return ide_started; diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 7031a8dcf692..6f04ea3e93a8 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -85,7 +85,7 @@ static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) mode = XFER_PIO_4; } -// printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed); +/* printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */ return min(speed, mode); } @@ -274,16 +274,6 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode) if (overridden) printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n", drive->name); - - /* - * Conservative "downgrade" for all pre-ATA2 drives - */ - if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_DOWNGRADE) == 0 && - pio_mode && pio_mode < 4) { - pio_mode--; - printk(KERN_INFO "%s: applying conservative " - "PIO \"downgrade\"\n", drive->name); - } } if (pio_mode > max_mode) @@ -298,9 +288,11 @@ EXPORT_SYMBOL_GPL(ide_get_best_pio_mode); void ide_set_pio(ide_drive_t *drive, u8 req_pio) { ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; u8 host_pio, pio; - if (hwif->set_pio_mode == NULL) + if (port_ops == NULL || port_ops->set_pio_mode == NULL || + (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) return; BUG_ON(hwif->pio_mask == 0x00); @@ -352,26 +344,30 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) { ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) + return 0; - if (hwif->set_pio_mode == NULL) + if (port_ops == NULL || port_ops->set_pio_mode == NULL) return -1; /* * TODO: temporary hack for some legacy host drivers that didn't * set transfer mode on the device in ->set_pio_mode method... */ - if (hwif->set_dma_mode == NULL) { - hwif->set_pio_mode(drive, mode - XFER_PIO_0); + if (port_ops->set_dma_mode == NULL) { + port_ops->set_pio_mode(drive, mode - XFER_PIO_0); return 0; } if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { if (ide_config_drive_speed(drive, mode)) return -1; - hwif->set_pio_mode(drive, mode - XFER_PIO_0); + port_ops->set_pio_mode(drive, mode - XFER_PIO_0); return 0; } else { - hwif->set_pio_mode(drive, mode - XFER_PIO_0); + port_ops->set_pio_mode(drive, mode - XFER_PIO_0); return ide_config_drive_speed(drive, mode); } } @@ -379,17 +375,21 @@ int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) { ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) + return 0; - if (hwif->set_dma_mode == NULL) + if (port_ops == NULL || port_ops->set_dma_mode == NULL) return -1; if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { if (ide_config_drive_speed(drive, mode)) return -1; - hwif->set_dma_mode(drive, mode); + port_ops->set_dma_mode(drive, mode); return 0; } else { - hwif->set_dma_mode(drive, mode); + port_ops->set_dma_mode(drive, mode); return ide_config_drive_speed(drive, mode); } } @@ -409,8 +409,10 @@ EXPORT_SYMBOL_GPL(ide_set_dma_mode); int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; - if (hwif->set_dma_mode == NULL) + if (port_ops == NULL || port_ops->set_dma_mode == NULL || + (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) return -1; rate = ide_rate_filter(drive, rate); diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index b163b2e52212..84f1f62800a7 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -11,60 +11,80 @@ * * You should have received a copy of the GNU General Public License * (for example /usr/src/linux/COPYING); if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/init.h> #include <linux/pnp.h> #include <linux/ide.h> +#define DRV_NAME "ide-pnp" + /* Add your devices here :)) */ static struct pnp_device_id idepnp_devices[] = { - /* Generic ESDI/IDE/ATA compatible hard disk controller */ + /* Generic ESDI/IDE/ATA compatible hard disk controller */ {.id = "PNP0600", .driver_data = 0}, {.id = ""} }; -static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id) +static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) { hw_regs_t hw; ide_hwif_t *hwif; + unsigned long base, ctl; if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && pnp_irq_valid(dev, 0))) return -1; + base = pnp_port_start(dev, 0); + ctl = pnp_port_start(dev, 1); + + if (!request_region(base, 8, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", + DRV_NAME, base, base + 7); + return -EBUSY; + } + + if (!request_region(ctl, 1, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", + DRV_NAME, ctl); + release_region(base, 8); + return -EBUSY; + } + memset(&hw, 0, sizeof(hw)); - ide_std_init_ports(&hw, pnp_port_start(dev, 0), - pnp_port_start(dev, 1)); + ide_std_init_ports(&hw, base, ctl); hw.irq = pnp_irq(dev, 0); - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif) { u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); - pnp_set_drvdata(dev,hwif); + pnp_set_drvdata(dev, hwif); ide_device_add(idx, NULL); return 0; } + release_region(ctl, 1); + release_region(base, 8); + return -1; } -static void idepnp_remove(struct pnp_dev * dev) +static void idepnp_remove(struct pnp_dev *dev) { ide_hwif_t *hwif = pnp_get_drvdata(dev); - if (hwif) - ide_unregister(hwif->index, 0, 0); - else - printk(KERN_ERR "idepnp: Unable to remove device, please report.\n"); + ide_unregister(hwif); + + release_region(pnp_port_start(dev, 1), 1); + release_region(pnp_port_start(dev, 0), 8); } static struct pnp_driver idepnp_driver = { diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 194ecb0049eb..7e2716bf4437 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -39,6 +39,8 @@ #include <asm/uaccess.h> #include <asm/io.h> +static ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ + /** * generic_id - add a generic drive id * @drive: drive to make an ID block for @@ -271,7 +273,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) /* take a deep breath */ msleep(50); - if (IDE_CONTROL_REG) { + if (hwif->io_ports[IDE_CONTROL_OFFSET]) { a = ide_read_altstatus(drive); s = ide_read_status(drive); if ((a ^ s) & ~INDEX_STAT) @@ -289,10 +291,10 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) */ if ((cmd == WIN_PIDENTIFY)) /* disable dma & overlap */ - hwif->OUTB(0, IDE_FEATURE_REG); + hwif->OUTB(0, hwif->io_ports[IDE_FEATURE_OFFSET]); /* ask drive for ID */ - hwif->OUTB(cmd, IDE_COMMAND_REG); + hwif->OUTB(cmd, hwif->io_ports[IDE_COMMAND_OFFSET]); timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; timeout += jiffies; @@ -353,7 +355,7 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd) * interrupts during the identify-phase that * the irq handler isn't expecting. */ - if (IDE_CONTROL_REG) { + if (hwif->io_ports[IDE_CONTROL_OFFSET]) { if (!hwif->irq) { autoprobe = 1; cookie = probe_irq_on(); @@ -445,7 +447,8 @@ static int do_probe (ide_drive_t *drive, u8 cmd) msleep(50); SELECT_DRIVE(drive); msleep(50); - if (hwif->INB(IDE_SELECT_REG) != drive->select.all && !drive->present) { + if (hwif->INB(hwif->io_ports[IDE_SELECT_OFFSET]) != drive->select.all && + !drive->present) { if (drive->select.b.unit != 0) { /* exit with drive0 selected */ SELECT_DRIVE(&hwif->drives[0]); @@ -471,15 +474,15 @@ static int do_probe (ide_drive_t *drive, u8 cmd) if (stat == (BUSY_STAT | READY_STAT)) return 4; - if ((rc == 1 && cmd == WIN_PIDENTIFY) && - ((drive->autotune == IDE_TUNE_DEFAULT) || - (drive->autotune == IDE_TUNE_AUTO))) { + if (rc == 1 && cmd == WIN_PIDENTIFY) { printk(KERN_ERR "%s: no response (status = 0x%02x), " "resetting drive\n", drive->name, stat); msleep(50); - hwif->OUTB(drive->select.all, IDE_SELECT_REG); + hwif->OUTB(drive->select.all, + hwif->io_ports[IDE_SELECT_OFFSET]); msleep(50); - hwif->OUTB(WIN_SRST, IDE_COMMAND_REG); + hwif->OUTB(WIN_SRST, + hwif->io_ports[IDE_COMMAND_OFFSET]); (void)ide_busy_sleep(hwif); rc = try_to_identify(drive, cmd); } @@ -515,7 +518,7 @@ static void enable_nest (ide_drive_t *drive) printk("%s: enabling %s -- ", hwif->name, drive->id->model); SELECT_DRIVE(drive); msleep(50); - hwif->OUTB(EXABYTE_ENABLE_NEST, IDE_COMMAND_REG); + hwif->OUTB(EXABYTE_ENABLE_NEST, hwif->io_ports[IDE_COMMAND_OFFSET]); if (ide_busy_sleep(hwif)) { printk(KERN_CONT "failed (timeout)\n"); @@ -623,7 +626,7 @@ static void hwif_release_dev (struct device *dev) complete(&hwif->gendev_rel_comp); } -static void ide_register_port(ide_hwif_t *hwif) +static int ide_register_port(ide_hwif_t *hwif) { int ret; @@ -639,9 +642,23 @@ static void ide_register_port(ide_hwif_t *hwif) } hwif->gendev.release = hwif_release_dev; ret = device_register(&hwif->gendev); - if (ret < 0) + if (ret < 0) { printk(KERN_WARNING "IDE: %s: device_register error: %d\n", - __FUNCTION__, ret); + __func__, ret); + goto out; + } + + get_device(&hwif->gendev); + + hwif->portdev = device_create(ide_port_class, &hwif->gendev, + MKDEV(0, 0), hwif->name); + if (IS_ERR(hwif->portdev)) { + ret = PTR_ERR(hwif->portdev); + device_unregister(&hwif->gendev); + } + dev_set_drvdata(hwif->portdev, hwif); +out: + return ret; } /** @@ -756,8 +773,7 @@ static int ide_probe_port(ide_hwif_t *hwif) BUG_ON(hwif->present); - if (hwif->noprobe || - (hwif->drives[0].noprobe && hwif->drives[1].noprobe)) + if (hwif->drives[0].noprobe && hwif->drives[1].noprobe) return -EACCES; /* @@ -783,14 +799,9 @@ static int ide_probe_port(ide_hwif_t *hwif) if (drive->present) rc = 0; } - if (hwif->io_ports[IDE_CONTROL_OFFSET] && hwif->reset) { - printk(KERN_WARNING "%s: reset\n", hwif->name); - hwif->OUTB(12, hwif->io_ports[IDE_CONTROL_OFFSET]); - udelay(10); - hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); - (void)ide_busy_sleep(hwif); - } + local_irq_restore(flags); + /* * Use cached IRQ number. It might be (and is...) changed by probe * code above @@ -803,29 +814,25 @@ static int ide_probe_port(ide_hwif_t *hwif) static void ide_port_tune_devices(ide_hwif_t *hwif) { + const struct ide_port_ops *port_ops = hwif->port_ops; int unit; for (unit = 0; unit < MAX_DRIVES; unit++) { ide_drive_t *drive = &hwif->drives[unit]; - if (drive->present && hwif->quirkproc) - hwif->quirkproc(drive); + if (drive->present && port_ops && port_ops->quirkproc) + port_ops->quirkproc(drive); } for (unit = 0; unit < MAX_DRIVES; ++unit) { ide_drive_t *drive = &hwif->drives[unit]; if (drive->present) { - if (drive->autotune == IDE_TUNE_AUTO) - ide_set_max_pio(drive); - - if (drive->autotune != IDE_TUNE_DEFAULT && - drive->autotune != IDE_TUNE_AUTO) - continue; + ide_set_max_pio(drive); drive->nice1 = 1; - if (hwif->dma_host_set) + if (hwif->dma_ops) ide_set_dma(drive); } } @@ -948,6 +955,7 @@ static void ide_port_setup_devices(ide_hwif_t *hwif) { int i; + mutex_lock(&ide_cfg_mtx); for (i = 0; i < MAX_DRIVES; i++) { ide_drive_t *drive = &hwif->drives[i]; @@ -962,6 +970,7 @@ static void ide_port_setup_devices(ide_hwif_t *hwif) ide_add_drive_to_hwgroup(drive); } + mutex_unlock(&ide_cfg_mtx); } /* @@ -1087,8 +1096,6 @@ static int init_irq (ide_hwif_t *hwif) hwif->sharing_irq ? "shar" : "serializ", match->name); printk("\n"); - ide_port_setup_devices(hwif); - mutex_unlock(&ide_cfg_mtx); return 0; out_unlink: @@ -1198,6 +1205,8 @@ static void drive_release_dev (struct device *dev) { ide_drive_t *drive = container_of(dev, ide_drive_t, gendev); + ide_proc_unregister_device(drive); + spin_lock_irq(&ide_lock); ide_remove_drive_from_hwgroup(drive); kfree(drive->id); @@ -1213,6 +1222,10 @@ static void drive_release_dev (struct device *dev) complete(&drive->gendev_rel_comp); } +#ifndef ide_default_irq +#define ide_default_irq(irq) 0 +#endif + static int hwif_init(ide_hwif_t *hwif) { int old_irq; @@ -1224,13 +1237,6 @@ static int hwif_init(ide_hwif_t *hwif) return 0; } } -#ifdef CONFIG_BLK_DEV_HD - if (hwif->irq == HD_IRQ && hwif->io_ports[IDE_DATA_OFFSET] != HD_DATA) { - printk("%s: CANNOT SHARE IRQ WITH OLD " - "HARDDISK DRIVER (hd.c)\n", hwif->name); - return 0; - } -#endif /* CONFIG_BLK_DEV_HD */ if (register_blkdev(hwif->major, hwif->name)) return 0; @@ -1307,6 +1313,7 @@ static void hwif_register_devices(ide_hwif_t *hwif) static void ide_port_init_devices(ide_hwif_t *hwif) { + const struct ide_port_ops *port_ops = hwif->port_ops; int i; for (i = 0; i < MAX_DRIVES; i++) { @@ -1318,12 +1325,10 @@ static void ide_port_init_devices(ide_hwif_t *hwif) drive->unmask = 1; if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) drive->no_unmask = 1; - if ((hwif->host_flags & IDE_HFLAG_NO_AUTOTUNE) == 0) - drive->autotune = 1; } - if (hwif->port_init_devs) - hwif->port_init_devs(hwif); + if (port_ops && port_ops->port_init_devs) + port_ops->port_init_devs(hwif); } static void ide_init_port(ide_hwif_t *hwif, unsigned int port, @@ -1338,9 +1343,6 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port, if (d->init_iops) d->init_iops(hwif); - if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) - ide_hwif_setup_dma(hwif, d); - if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) || (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS)) hwif->irq = port ? 15 : 14; @@ -1348,16 +1350,36 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port, hwif->host_flags = d->host_flags; hwif->pio_mask = d->pio_mask; - if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate) - hwif->mate->serialized = hwif->serialized = 1; + /* ->set_pio_mode for DTC2278 is currently limited to port 0 */ + if (hwif->chipset != ide_dtc2278 || hwif->channel == 0) + hwif->port_ops = d->port_ops; + + if ((d->host_flags & IDE_HFLAG_SERIALIZE) || + ((d->host_flags & IDE_HFLAG_SERIALIZE_DMA) && hwif->dma_base)) { + if (hwif->mate) + hwif->mate->serialized = hwif->serialized = 1; + } hwif->swdma_mask = d->swdma_mask; hwif->mwdma_mask = d->mwdma_mask; hwif->ultra_mask = d->udma_mask; - /* reset DMA masks only for SFF-style DMA controllers */ - if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0 && hwif->dma_base == 0) - hwif->swdma_mask = hwif->mwdma_mask = hwif->ultra_mask = 0; + if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) { + int rc; + + if (d->init_dma) + rc = d->init_dma(hwif, d); + else + rc = ide_hwif_setup_dma(hwif, d); + + if (rc < 0) { + printk(KERN_INFO "%s: DMA disabled\n", hwif->name); + hwif->swdma_mask = 0; + hwif->mwdma_mask = 0; + hwif->ultra_mask = 0; + } else if (d->dma_ops) + hwif->dma_ops = d->dma_ops; + } if (d->host_flags & IDE_HFLAG_RQSIZE_256) hwif->rqsize = 256; @@ -1365,26 +1387,142 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port, /* call chipset specific routine for each enabled port */ if (d->init_hwif) d->init_hwif(hwif); +} - if (hwif->cable_detect && (hwif->ultra_mask & 0x78)) { +static void ide_port_cable_detect(ide_hwif_t *hwif) +{ + const struct ide_port_ops *port_ops = hwif->port_ops; + + if (port_ops && port_ops->cable_detect && (hwif->ultra_mask & 0x78)) { if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = hwif->cable_detect(hwif); + hwif->cbl = port_ops->cable_detect(hwif); } } +static ssize_t store_delete_devices(struct device *portdev, + struct device_attribute *attr, + const char *buf, size_t n) +{ + ide_hwif_t *hwif = dev_get_drvdata(portdev); + + if (strncmp(buf, "1", n)) + return -EINVAL; + + ide_port_unregister_devices(hwif); + + return n; +}; + +static DEVICE_ATTR(delete_devices, S_IWUSR, NULL, store_delete_devices); + +static ssize_t store_scan(struct device *portdev, + struct device_attribute *attr, + const char *buf, size_t n) +{ + ide_hwif_t *hwif = dev_get_drvdata(portdev); + + if (strncmp(buf, "1", n)) + return -EINVAL; + + ide_port_unregister_devices(hwif); + ide_port_scan(hwif); + + return n; +}; + +static DEVICE_ATTR(scan, S_IWUSR, NULL, store_scan); + +static struct device_attribute *ide_port_attrs[] = { + &dev_attr_delete_devices, + &dev_attr_scan, + NULL +}; + +static int ide_sysfs_register_port(ide_hwif_t *hwif) +{ + int i, rc; + + for (i = 0; ide_port_attrs[i]; i++) { + rc = device_create_file(hwif->portdev, ide_port_attrs[i]); + if (rc) + break; + } + + return rc; +} + +/** + * ide_find_port_slot - find free ide_hwifs[] slot + * @d: IDE port info + * + * Return the new hwif. If we are out of free slots return NULL. + */ + +ide_hwif_t *ide_find_port_slot(const struct ide_port_info *d) +{ + ide_hwif_t *hwif; + int i; + u8 bootable = (d && (d->host_flags & IDE_HFLAG_NON_BOOTABLE)) ? 0 : 1; + + /* + * Claim an unassigned slot. + * + * Give preference to claiming other slots before claiming ide0/ide1, + * just in case there's another interface yet-to-be-scanned + * which uses ports 0x1f0/0x170 (the ide0/ide1 defaults). + * + * Unless there is a bootable card that does not use the standard + * ports 0x1f0/0x170 (the ide0/ide1 defaults). + */ + if (bootable) { + i = (d && (d->host_flags & IDE_HFLAG_QD_2ND_PORT)) ? 1 : 0; + + for (; i < MAX_HWIFS; i++) { + hwif = &ide_hwifs[i]; + if (hwif->chipset == ide_unknown) + goto out_found; + } + } else { + for (i = 2; i < MAX_HWIFS; i++) { + hwif = &ide_hwifs[i]; + if (hwif->chipset == ide_unknown) + goto out_found; + } + for (i = 0; i < 2 && i < MAX_HWIFS; i++) { + hwif = &ide_hwifs[i]; + if (hwif->chipset == ide_unknown) + goto out_found; + } + } + + return NULL; + +out_found: + ide_init_port_data(hwif, i); + return hwif; +} +EXPORT_SYMBOL_GPL(ide_find_port_slot); + int ide_device_add_all(u8 *idx, const struct ide_port_info *d) { ide_hwif_t *hwif, *mate = NULL; int i, rc = 0; for (i = 0; i < MAX_HWIFS; i++) { - if (d == NULL || idx[i] == 0xff) { + if (idx[i] == 0xff) { mate = NULL; continue; } hwif = &ide_hwifs[idx[i]]; + ide_port_apply_params(hwif); + + if (d == NULL) { + mate = NULL; + continue; + } + if (d->chipset != ide_etrax100 && (i & 1) && mate) { hwif->mate = mate; mate->mate = hwif; @@ -1393,6 +1531,7 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) mate = (i & 1) ? NULL : hwif; ide_init_port(hwif, i & 1, d); + ide_port_cable_detect(hwif); ide_port_init_devices(hwif); } @@ -1402,25 +1541,15 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) hwif = &ide_hwifs[idx[i]]; - if ((hwif->chipset != ide_4drives || !hwif->mate || - !hwif->mate->present) && ide_hwif_request_regions(hwif)) { - printk(KERN_ERR "%s: ports already in use, " - "skipping probe\n", hwif->name); - continue; - } - - if (ide_probe_port(hwif) < 0) { - ide_hwif_release_regions(hwif); - continue; - } - - hwif->present = 1; + if (ide_probe_port(hwif) == 0) + hwif->present = 1; if (hwif->chipset != ide_4drives || !hwif->mate || !hwif->mate->present) ide_register_port(hwif); - ide_port_tune_devices(hwif); + if (hwif->present) + ide_port_tune_devices(hwif); } for (i = 0; i < MAX_HWIFS; i++) { @@ -1429,9 +1558,6 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) hwif = &ide_hwifs[idx[i]]; - if (!hwif->present) - continue; - if (hwif_init(hwif) == 0) { printk(KERN_INFO "%s: failed to initialize IDE " "interface\n", hwif->name); @@ -1440,8 +1566,13 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) continue; } + if (hwif->present) + ide_port_setup_devices(hwif); + ide_acpi_init(hwif); - ide_acpi_port_init_devices(hwif); + + if (hwif->present) + ide_acpi_port_init_devices(hwif); } for (i = 0; i < MAX_HWIFS; i++) { @@ -1450,12 +1581,11 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) hwif = &ide_hwifs[idx[i]]; - if (hwif->present) { - if (hwif->chipset == ide_unknown || - hwif->chipset == ide_forced) - hwif->chipset = ide_generic; + if (hwif->chipset == ide_unknown) + hwif->chipset = ide_generic; + + if (hwif->present) hwif_register_devices(hwif); - } } for (i = 0; i < MAX_HWIFS; i++) { @@ -1464,10 +1594,11 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) hwif = &ide_hwifs[idx[i]]; - if (hwif->present) { - ide_proc_register_port(hwif); + ide_sysfs_register_port(hwif); + ide_proc_register_port(hwif); + + if (hwif->present) ide_proc_port_register_devices(hwif); - } } return rc; @@ -1485,3 +1616,86 @@ int ide_device_add(u8 idx[4], const struct ide_port_info *d) return ide_device_add_all(idx_all, d); } EXPORT_SYMBOL_GPL(ide_device_add); + +void ide_port_scan(ide_hwif_t *hwif) +{ + ide_port_apply_params(hwif); + ide_port_cable_detect(hwif); + ide_port_init_devices(hwif); + + if (ide_probe_port(hwif) < 0) + return; + + hwif->present = 1; + + ide_port_tune_devices(hwif); + ide_acpi_port_init_devices(hwif); + ide_port_setup_devices(hwif); + hwif_register_devices(hwif); + ide_proc_port_register_devices(hwif); +} +EXPORT_SYMBOL_GPL(ide_port_scan); + +static void ide_legacy_init_one(u8 *idx, hw_regs_t *hw, u8 port_no, + const struct ide_port_info *d, + unsigned long config) +{ + ide_hwif_t *hwif; + unsigned long base, ctl; + int irq; + + if (port_no == 0) { + base = 0x1f0; + ctl = 0x3f6; + irq = 14; + } else { + base = 0x170; + ctl = 0x376; + irq = 15; + } + + if (!request_region(base, 8, d->name)) { + printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", + d->name, base, base + 7); + return; + } + + if (!request_region(ctl, 1, d->name)) { + printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", + d->name, ctl); + release_region(base, 8); + return; + } + + ide_std_init_ports(hw, base, ctl); + hw->irq = irq; + + hwif = ide_find_port_slot(d); + if (hwif) { + ide_init_port_hw(hwif, hw); + if (config) + hwif->config_data = config; + idx[port_no] = hwif->index; + } +} + +int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config) +{ + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + hw_regs_t hw[2]; + + memset(&hw, 0, sizeof(hw)); + + if ((d->host_flags & IDE_HFLAG_QD_2ND_PORT) == 0) + ide_legacy_init_one(idx, &hw[0], 0, d, config); + ide_legacy_init_one(idx, &hw[1], 1, d, config); + + if (idx[0] == 0xff && idx[1] == 0xff && + (d->host_flags & IDE_HFLAG_SINGLE)) + return -ENOENT; + + ide_device_add(idx, d); + + return 0; +} +EXPORT_SYMBOL_GPL(ide_legacy_device_add); diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index bab88ca7f7ec..d9d98ac85b29 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -46,32 +46,29 @@ static int proc_ide_read_imodel int len; const char *name; - /* - * Neither ide_unknown nor ide_forced should be set at this point. - */ switch (hwif->chipset) { - case ide_generic: name = "generic"; break; - case ide_pci: name = "pci"; break; - case ide_cmd640: name = "cmd640"; break; - case ide_dtc2278: name = "dtc2278"; break; - case ide_ali14xx: name = "ali14xx"; break; - case ide_qd65xx: name = "qd65xx"; break; - case ide_umc8672: name = "umc8672"; break; - case ide_ht6560b: name = "ht6560b"; break; - case ide_rz1000: name = "rz1000"; break; - case ide_trm290: name = "trm290"; break; - case ide_cmd646: name = "cmd646"; break; - case ide_cy82c693: name = "cy82c693"; break; - case ide_4drives: name = "4drives"; break; - case ide_pmac: name = "mac-io"; break; - case ide_au1xxx: name = "au1xxx"; break; - case ide_palm3710: name = "palm3710"; break; - case ide_etrax100: name = "etrax100"; break; - case ide_acorn: name = "acorn"; break; - default: name = "(unknown)"; break; + case ide_generic: name = "generic"; break; + case ide_pci: name = "pci"; break; + case ide_cmd640: name = "cmd640"; break; + case ide_dtc2278: name = "dtc2278"; break; + case ide_ali14xx: name = "ali14xx"; break; + case ide_qd65xx: name = "qd65xx"; break; + case ide_umc8672: name = "umc8672"; break; + case ide_ht6560b: name = "ht6560b"; break; + case ide_rz1000: name = "rz1000"; break; + case ide_trm290: name = "trm290"; break; + case ide_cmd646: name = "cmd646"; break; + case ide_cy82c693: name = "cy82c693"; break; + case ide_4drives: name = "4drives"; break; + case ide_pmac: name = "mac-io"; break; + case ide_au1xxx: name = "au1xxx"; break; + case ide_palm3710: name = "palm3710"; break; + case ide_etrax100: name = "etrax100"; break; + case ide_acorn: name = "acorn"; break; + default: name = "(unknown)"; break; } len = sprintf(page, "%s\n", name); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static int proc_ide_read_mate @@ -84,7 +81,7 @@ static int proc_ide_read_mate len = sprintf(page, "%s\n", hwif->mate->name); else len = sprintf(page, "(none)\n"); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static int proc_ide_read_channel @@ -96,7 +93,7 @@ static int proc_ide_read_channel page[0] = hwif->channel ? '1' : '0'; page[1] = '\n'; len = 2; - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static int proc_ide_read_identify @@ -123,7 +120,7 @@ static int proc_ide_read_identify len = out - page; } } - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } /** @@ -200,7 +197,7 @@ EXPORT_SYMBOL(ide_add_setting); * The caller must hold the setting semaphore. */ -static void __ide_remove_setting (ide_drive_t *drive, char *name) +static void __ide_remove_setting(ide_drive_t *drive, char *name) { ide_settings_t **p, *setting; @@ -208,7 +205,8 @@ static void __ide_remove_setting (ide_drive_t *drive, char *name) while ((*p) && strcmp((*p)->name, name)) p = &((*p)->next); - if ((setting = (*p)) == NULL) + setting = (*p); + if (setting == NULL) return; (*p) = setting->next; @@ -226,7 +224,7 @@ static void __ide_remove_setting (ide_drive_t *drive, char *name) * caller must hold ide_setting_mtx. */ -static void auto_remove_settings (ide_drive_t *drive) +static void auto_remove_settings(ide_drive_t *drive) { ide_settings_t *setting; repeat: @@ -282,16 +280,16 @@ static int ide_read_setting(ide_drive_t *drive, ide_settings_t *setting) if ((setting->rw & SETTING_READ)) { spin_lock_irqsave(&ide_lock, flags); - switch(setting->data_type) { - case TYPE_BYTE: - val = *((u8 *) setting->data); - break; - case TYPE_SHORT: - val = *((u16 *) setting->data); - break; - case TYPE_INT: - val = *((u32 *) setting->data); - break; + switch (setting->data_type) { + case TYPE_BYTE: + val = *((u8 *) setting->data); + break; + case TYPE_SHORT: + val = *((u16 *) setting->data); + break; + case TYPE_INT: + val = *((u32 *) setting->data); + break; } spin_unlock_irqrestore(&ide_lock, flags); } @@ -329,15 +327,15 @@ static int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int va if (ide_spin_wait_hwgroup(drive)) return -EBUSY; switch (setting->data_type) { - case TYPE_BYTE: - *((u8 *) setting->data) = val; - break; - case TYPE_SHORT: - *((u16 *) setting->data) = val; - break; - case TYPE_INT: - *((u32 *) setting->data) = val; - break; + case TYPE_BYTE: + *((u8 *) setting->data) = val; + break; + case TYPE_SHORT: + *((u16 *) setting->data) = val; + break; + case TYPE_INT: + *((u32 *) setting->data) = val; + break; } spin_unlock_irq(&ide_lock); return 0; @@ -393,7 +391,7 @@ void ide_add_generic_settings (ide_drive_t *drive) static void proc_ide_settings_warn(void) { - static int warned = 0; + static int warned; if (warned) return; @@ -416,11 +414,12 @@ static int proc_ide_read_settings mutex_lock(&ide_setting_mtx); out += sprintf(out, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n"); out += sprintf(out, "----\t\t\t-----\t\t---\t\t---\t\t----\n"); - while(setting) { + while (setting) { mul_factor = setting->mul_factor; div_factor = setting->div_factor; out += sprintf(out, "%-24s", setting->name); - if ((rc = ide_read_setting(drive, setting)) >= 0) + rc = ide_read_setting(drive, setting); + if (rc >= 0) out += sprintf(out, "%-16d", rc * mul_factor / div_factor); else out += sprintf(out, "%-16s", "write-only"); @@ -434,7 +433,7 @@ static int proc_ide_read_settings } len = out - page; mutex_unlock(&ide_setting_mtx); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } #define MAX_LEN 30 @@ -515,8 +514,7 @@ static int proc_ide_write_settings(struct file *file, const char __user *buffer, mutex_lock(&ide_setting_mtx); setting = ide_find_setting_by_name(drive, name); - if (!setting) - { + if (!setting) { mutex_unlock(&ide_setting_mtx); goto parse_error; } @@ -536,8 +534,8 @@ parse_error: int proc_ide_read_capacity (char *page, char **start, off_t off, int count, int *eof, void *data) { - int len = sprintf(page,"%llu\n", (long long)0x7fffffff); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + int len = sprintf(page, "%llu\n", (long long)0x7fffffff); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } EXPORT_SYMBOL_GPL(proc_ide_read_capacity); @@ -549,13 +547,13 @@ int proc_ide_read_geometry char *out = page; int len; - out += sprintf(out,"physical %d/%d/%d\n", + out += sprintf(out, "physical %d/%d/%d\n", drive->cyl, drive->head, drive->sect); - out += sprintf(out,"logical %d/%d/%d\n", + out += sprintf(out, "logical %d/%d/%d\n", drive->bios_cyl, drive->bios_head, drive->bios_sect); len = out - page; - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } EXPORT_SYMBOL(proc_ide_read_geometry); @@ -569,7 +567,7 @@ static int proc_ide_read_dmodel len = sprintf(page, "%.40s\n", (id && id->model[0]) ? (char *)id->model : "(none)"); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static int proc_ide_read_driver @@ -586,7 +584,7 @@ static int proc_ide_read_driver dev->driver->name, ide_drv->version); } else len = sprintf(page, "ide-default version 0.9.newide\n"); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static int ide_replace_subdriver(ide_drive_t *drive, const char *driver) @@ -601,14 +599,14 @@ static int ide_replace_subdriver(ide_drive_t *drive, const char *driver) err = device_attach(dev); if (err < 0) printk(KERN_WARNING "IDE: %s: device_attach error: %d\n", - __FUNCTION__, err); + __func__, err); drive->driver_req[0] = 0; if (dev->driver == NULL) { err = device_attach(dev); if (err < 0) printk(KERN_WARNING "IDE: %s: device_attach(2) error: %d\n", - __FUNCTION__, err); + __func__, err); } if (dev->driver && !strcmp(dev->driver->name, driver)) ret = 0; @@ -642,30 +640,26 @@ static int proc_ide_read_media int len; switch (drive->media) { - case ide_disk: media = "disk\n"; - break; - case ide_cdrom: media = "cdrom\n"; - break; - case ide_tape: media = "tape\n"; - break; - case ide_floppy:media = "floppy\n"; - break; - case ide_optical:media = "optical\n"; - break; - default: media = "UNKNOWN\n"; - break; + case ide_disk: media = "disk\n"; break; + case ide_cdrom: media = "cdrom\n"; break; + case ide_tape: media = "tape\n"; break; + case ide_floppy: media = "floppy\n"; break; + case ide_optical: media = "optical\n"; break; + default: media = "UNKNOWN\n"; break; } - strcpy(page,media); + strcpy(page, media); len = strlen(media); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static ide_proc_entry_t generic_drive_entries[] = { - { "driver", S_IFREG|S_IRUGO, proc_ide_read_driver, proc_ide_write_driver }, - { "identify", S_IFREG|S_IRUSR, proc_ide_read_identify, NULL }, - { "media", S_IFREG|S_IRUGO, proc_ide_read_media, NULL }, - { "model", S_IFREG|S_IRUGO, proc_ide_read_dmodel, NULL }, - { "settings", S_IFREG|S_IRUSR|S_IWUSR,proc_ide_read_settings, proc_ide_write_settings }, + { "driver", S_IFREG|S_IRUGO, proc_ide_read_driver, + proc_ide_write_driver }, + { "identify", S_IFREG|S_IRUSR, proc_ide_read_identify, NULL }, + { "media", S_IFREG|S_IRUGO, proc_ide_read_media, NULL }, + { "model", S_IFREG|S_IRUGO, proc_ide_read_dmodel, NULL }, + { "settings", S_IFREG|S_IRUSR|S_IWUSR, proc_ide_read_settings, + proc_ide_write_settings }, { NULL, 0, NULL, NULL } }; @@ -737,7 +731,6 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) spin_unlock_irqrestore(&ide_lock, flags); mutex_unlock(&ide_setting_mtx); } - EXPORT_SYMBOL(ide_proc_unregister_driver); void ide_proc_port_register_devices(ide_hwif_t *hwif) @@ -758,33 +751,22 @@ void ide_proc_port_register_devices(ide_hwif_t *hwif) drive->proc = proc_mkdir(drive->name, parent); if (drive->proc) ide_add_proc_entries(drive->proc, generic_drive_entries, drive); - sprintf(name,"ide%d/%s", (drive->name[2]-'a')/2, drive->name); + sprintf(name, "ide%d/%s", (drive->name[2]-'a')/2, drive->name); ent = proc_symlink(drive->name, proc_ide_root, name); if (!ent) return; } } -static void destroy_proc_ide_device(ide_hwif_t *hwif, ide_drive_t *drive) +void ide_proc_unregister_device(ide_drive_t *drive) { if (drive->proc) { ide_remove_proc_entries(drive->proc, generic_drive_entries); remove_proc_entry(drive->name, proc_ide_root); - remove_proc_entry(drive->name, hwif->proc); + remove_proc_entry(drive->name, drive->hwif->proc); drive->proc = NULL; } } -static void destroy_proc_ide_drives(ide_hwif_t *hwif) -{ - int d; - - for (d = 0; d < MAX_DRIVES; d++) { - ide_drive_t *drive = &hwif->drives[d]; - if (drive->proc) - destroy_proc_ide_device(hwif, drive); - } -} - static ide_proc_entry_t hwif_entries[] = { { "channel", S_IFREG|S_IRUGO, proc_ide_read_channel, NULL }, { "mate", S_IFREG|S_IRUGO, proc_ide_read_mate, NULL }, @@ -809,14 +791,12 @@ void ide_pci_create_host_proc(const char *name, get_info_t *get_info) { create_proc_info_entry(name, 0, proc_ide_root, get_info); } - EXPORT_SYMBOL_GPL(ide_pci_create_host_proc); #endif void ide_proc_unregister_port(ide_hwif_t *hwif) { if (hwif->proc) { - destroy_proc_ide_drives(hwif); ide_remove_proc_entries(hwif->proc, hwif_entries); remove_proc_entry(hwif->name, proc_ide_root); hwif->proc = NULL; @@ -840,7 +820,7 @@ static int ide_drivers_show(struct seq_file *s, void *p) err = bus_for_each_drv(&ide_bus_type, NULL, s, proc_print_driver); if (err < 0) printk(KERN_WARNING "IDE: %s: bus_for_each_drv error: %d\n", - __FUNCTION__, err); + __func__, err); return 0; } diff --git a/drivers/ide/ide-scan-pci.c b/drivers/ide/ide-scan-pci.c index 98888da1b600..0e79efff1deb 100644 --- a/drivers/ide/ide-scan-pci.c +++ b/drivers/ide/ide-scan-pci.c @@ -102,7 +102,7 @@ static int __init ide_scan_pcibus(void) if (__pci_register_driver(d, d->driver.owner, d->driver.mod_name)) printk(KERN_ERR "%s: failed to register %s driver\n", - __FUNCTION__, d->driver.mod_name); + __func__, d->driver.mod_name); } return 0; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 0598ecfd5f37..6752d47db2f8 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -72,26 +72,6 @@ enum { #endif /**************************** Tunable parameters *****************************/ - - -/* - * Pipelined mode parameters. - * - * We try to use the minimum number of stages which is enough to keep the tape - * constantly streaming. To accomplish that, we implement a feedback loop around - * the maximum number of stages: - * - * We start from MIN maximum stages (we will not even use MIN stages if we don't - * need them), increment it by RATE*(MAX-MIN) whenever we sense that the - * pipeline is empty, until we reach the optimum value or until we reach MAX. - * - * Setting the following parameter to 0 is illegal: the pipelined mode cannot be - * disabled (idetape_calculate_speeds() divides by tape->max_stages.) - */ -#define IDETAPE_MIN_PIPELINE_STAGES 1 -#define IDETAPE_MAX_PIPELINE_STAGES 400 -#define IDETAPE_INCREASE_STAGES_RATE 20 - /* * After each failed packet command we issue a request sense command and retry * the packet command IDETAPE_MAX_PC_RETRIES times. @@ -181,49 +161,59 @@ struct idetape_bh { char *b_data; }; -typedef struct idetape_packet_command_s { - /* Actual packet bytes */ - u8 c[12]; - /* On each retry, we increment retries */ - int retries; - /* Error code */ - int error; - /* Bytes to transfer */ - int request_transfer; - /* Bytes actually transferred */ - int actually_transferred; - /* Size of our data buffer */ - int buffer_size; - struct idetape_bh *bh; - char *b_data; - int b_count; - /* Data buffer */ - u8 *buffer; - /* Pointer into the above buffer */ - u8 *current_position; - /* Called when this packet command is completed */ - ide_startstop_t (*callback) (ide_drive_t *); - /* Temporary buffer */ - u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE]; - /* Status/Action bit flags: long for set_bit */ - unsigned long flags; -} idetape_pc_t; +/* Tape door status */ +#define DOOR_UNLOCKED 0 +#define DOOR_LOCKED 1 +#define DOOR_EXPLICITLY_LOCKED 2 + +/* Some defines for the SPACE command */ +#define IDETAPE_SPACE_OVER_FILEMARK 1 +#define IDETAPE_SPACE_TO_EOD 3 + +/* Some defines for the LOAD UNLOAD command */ +#define IDETAPE_LU_LOAD_MASK 1 +#define IDETAPE_LU_RETENSION_MASK 2 +#define IDETAPE_LU_EOT_MASK 4 /* - * Packet command flag bits. + * Special requests for our block device strategy routine. + * + * In order to service a character device command, we add special requests to + * the tail of our block device request queue and wait for their completion. */ -/* Set when an error is considered normal - We won't retry */ -#define PC_ABORT 0 -/* 1 When polling for DSC on a media access command */ -#define PC_WAIT_FOR_DSC 1 -/* 1 when we prefer to use DMA if possible */ -#define PC_DMA_RECOMMENDED 2 -/* 1 while DMA in progress */ -#define PC_DMA_IN_PROGRESS 3 -/* 1 when encountered problem during DMA */ -#define PC_DMA_ERROR 4 -/* Data direction */ -#define PC_WRITING 5 + +enum { + REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */ + REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */ + REQ_IDETAPE_READ = (1 << 2), + REQ_IDETAPE_WRITE = (1 << 3), +}; + +/* Error codes returned in rq->errors to the higher part of the driver. */ +#define IDETAPE_ERROR_GENERAL 101 +#define IDETAPE_ERROR_FILEMARK 102 +#define IDETAPE_ERROR_EOD 103 + +/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */ +#define IDETAPE_BLOCK_DESCRIPTOR 0 +#define IDETAPE_CAPABILITIES_PAGE 0x2a + +/* Tape flag bits values. */ +enum { + IDETAPE_FLAG_IGNORE_DSC = (1 << 0), + /* 0 When the tape position is unknown */ + IDETAPE_FLAG_ADDRESS_VALID = (1 << 1), + /* Device already opened */ + IDETAPE_FLAG_BUSY = (1 << 2), + /* Attempt to auto-detect the current user block size */ + IDETAPE_FLAG_DETECT_BS = (1 << 3), + /* Currently on a filemark */ + IDETAPE_FLAG_FILEMARK = (1 << 4), + /* DRQ interrupt device */ + IDETAPE_FLAG_DRQ_INTERRUPT = (1 << 5), + /* 0 = no tape is loaded, so we don't rewind after ejecting */ + IDETAPE_FLAG_MEDIUM_PRESENT = (1 << 6), +}; /* A pipeline stage. */ typedef struct idetape_stage_s { @@ -258,11 +248,11 @@ typedef struct ide_tape_obj { * retry, to get detailed information on what went wrong. */ /* Current packet command */ - idetape_pc_t *pc; + struct ide_atapi_pc *pc; /* Last failed packet command */ - idetape_pc_t *failed_pc; + struct ide_atapi_pc *failed_pc; /* Packet command stack */ - idetape_pc_t pc_stack[IDETAPE_PC_STACK]; + struct ide_atapi_pc pc_stack[IDETAPE_PC_STACK]; /* Next free packet command storage space */ int pc_stack_index; struct request rq_stack[IDETAPE_PC_STACK]; @@ -275,9 +265,7 @@ typedef struct ide_tape_obj { * While polling for DSC we use postponed_rq to postpone the current * request so that ide.c will be able to service pending requests on the * other device. Note that at most we will have only one DSC (usually - * data transfer) request in the device request queue. Additional - * requests can be queued in our internal pipeline, but they will be - * visible to ide.c only one at a time. + * data transfer) request in the device request queue. */ struct request *postponed_rq; /* The time in which we started polling for DSC */ @@ -317,12 +305,8 @@ typedef struct ide_tape_obj { * At most, there is only one ide-tape originated data transfer request * in the device request queue. This allows ide.c to easily service * requests from the other device when we postpone our active request. - * In the pipelined operation mode, we use our internal pipeline - * structure to hold more data requests. The data buffer size is chosen - * based on the tape's recommendation. */ - /* ptr to the request which is waiting in the device request queue */ - struct request *active_data_rq; + /* Data buffer size chosen based on the tape's recommendation */ int stage_size; idetape_stage_t *merge_stage; @@ -331,28 +315,7 @@ typedef struct ide_tape_obj { char *b_data; int b_count; - /* - * Pipeline parameters. - * - * To accomplish non-pipelined mode, we simply set the following - * variables to zero (or NULL, where appropriate). - */ - /* Number of currently used stages */ - int nr_stages; - /* Number of pending stages */ - int nr_pending_stages; - /* We will not allocate more than this number of stages */ - int max_stages, min_pipeline, max_pipeline; - /* The first stage which will be removed from the pipeline */ - idetape_stage_t *first_stage; - /* The currently active stage */ - idetape_stage_t *active_stage; - /* Will be serviced after the currently active request */ - idetape_stage_t *next_stage; - /* New requests will be added to the pipeline here */ - idetape_stage_t *last_stage; - /* Optional free stage which we can use */ - idetape_stage_t *cache_stage; + /* Pipeline parameters. */ int pages_per_stage; /* Wasted space in each stage */ int excess_bh_size; @@ -374,45 +337,6 @@ typedef struct ide_tape_obj { /* the tape is write protected (hardware or opened as read-only) */ char write_prot; - /* - * Limit the number of times a request can be postponed, to avoid an - * infinite postpone deadlock. - */ - int postpone_cnt; - - /* - * Measures number of frames: - * - * 1. written/read to/from the driver pipeline (pipeline_head). - * 2. written/read to/from the tape buffers (idetape_bh). - * 3. written/read by the tape to/from the media (tape_head). - */ - int pipeline_head; - int buffer_head; - int tape_head; - int last_tape_head; - - /* Speed control at the tape buffers input/output */ - unsigned long insert_time; - int insert_size; - int insert_speed; - int max_insert_speed; - int measure_insert_time; - - /* Speed regulation negative feedback loop */ - int speed_control; - int pipeline_head_speed; - int controlled_pipeline_head_speed; - int uncontrolled_pipeline_head_speed; - int controlled_last_pipeline_head; - unsigned long uncontrolled_pipeline_head_time; - unsigned long controlled_pipeline_head_time; - int controlled_previous_pipeline_head; - int uncontrolled_previous_pipeline_head; - unsigned long controlled_previous_head_time; - unsigned long uncontrolled_previous_head_time; - int restart_speed_control_req; - u32 debug_mask; } idetape_tape_t; @@ -446,58 +370,6 @@ static void ide_tape_put(struct ide_tape_obj *tape) mutex_unlock(&idetape_ref_mutex); } -/* Tape door status */ -#define DOOR_UNLOCKED 0 -#define DOOR_LOCKED 1 -#define DOOR_EXPLICITLY_LOCKED 2 - -/* - * Tape flag bits values. - */ -#define IDETAPE_IGNORE_DSC 0 -#define IDETAPE_ADDRESS_VALID 1 /* 0 When the tape position is unknown */ -#define IDETAPE_BUSY 2 /* Device already opened */ -#define IDETAPE_PIPELINE_ERROR 3 /* Error detected in a pipeline stage */ -#define IDETAPE_DETECT_BS 4 /* Attempt to auto-detect the current user block size */ -#define IDETAPE_FILEMARK 5 /* Currently on a filemark */ -#define IDETAPE_DRQ_INTERRUPT 6 /* DRQ interrupt device */ -#define IDETAPE_READ_ERROR 7 -#define IDETAPE_PIPELINE_ACTIVE 8 /* pipeline active */ -/* 0 = no tape is loaded, so we don't rewind after ejecting */ -#define IDETAPE_MEDIUM_PRESENT 9 - -/* Some defines for the SPACE command */ -#define IDETAPE_SPACE_OVER_FILEMARK 1 -#define IDETAPE_SPACE_TO_EOD 3 - -/* Some defines for the LOAD UNLOAD command */ -#define IDETAPE_LU_LOAD_MASK 1 -#define IDETAPE_LU_RETENSION_MASK 2 -#define IDETAPE_LU_EOT_MASK 4 - -/* - * Special requests for our block device strategy routine. - * - * In order to service a character device command, we add special requests to - * the tail of our block device request queue and wait for their completion. - */ - -enum { - REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */ - REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */ - REQ_IDETAPE_READ = (1 << 2), - REQ_IDETAPE_WRITE = (1 << 3), -}; - -/* Error codes returned in rq->errors to the higher part of the driver. */ -#define IDETAPE_ERROR_GENERAL 101 -#define IDETAPE_ERROR_FILEMARK 102 -#define IDETAPE_ERROR_EOD 103 - -/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */ -#define IDETAPE_BLOCK_DESCRIPTOR 0 -#define IDETAPE_CAPABILITIES_PAGE 0x2a - /* * The variables below are used for the character device interface. Additional * state variables are defined in our ide_drive_t structure. @@ -518,17 +390,7 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i) return tape; } -/* - * Too bad. The drive wants to send us data which we are not ready to accept. - * Just throw it away. - */ -static void idetape_discard_data(ide_drive_t *drive, unsigned int bcount) -{ - while (bcount--) - (void) HWIF(drive)->INB(IDE_DATA_REG); -} - -static void idetape_input_buffers(ide_drive_t *drive, idetape_pc_t *pc, +static void idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, unsigned int bcount) { struct idetape_bh *bh = pc->bh; @@ -538,7 +400,7 @@ static void idetape_input_buffers(ide_drive_t *drive, idetape_pc_t *pc, if (bh == NULL) { printk(KERN_ERR "ide-tape: bh == NULL in " "idetape_input_buffers\n"); - idetape_discard_data(drive, bcount); + ide_atapi_discard_data(drive, bcount); return; } count = min( @@ -557,7 +419,7 @@ static void idetape_input_buffers(ide_drive_t *drive, idetape_pc_t *pc, pc->bh = bh; } -static void idetape_output_buffers(ide_drive_t *drive, idetape_pc_t *pc, +static void idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, unsigned int bcount) { struct idetape_bh *bh = pc->bh; @@ -585,13 +447,13 @@ static void idetape_output_buffers(ide_drive_t *drive, idetape_pc_t *pc, } } -static void idetape_update_buffers(idetape_pc_t *pc) +static void idetape_update_buffers(struct ide_atapi_pc *pc) { struct idetape_bh *bh = pc->bh; int count; - unsigned int bcount = pc->actually_transferred; + unsigned int bcount = pc->xferred; - if (test_bit(PC_WRITING, &pc->flags)) + if (pc->flags & PC_FLAG_WRITING) return; while (bcount) { if (bh == NULL) { @@ -614,7 +476,7 @@ static void idetape_update_buffers(idetape_pc_t *pc) * driver. A storage space for a maximum of IDETAPE_PC_STACK packet * commands is allocated at initialization time. */ -static idetape_pc_t *idetape_next_pc_storage(ide_drive_t *drive) +static struct ide_atapi_pc *idetape_next_pc_storage(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -649,14 +511,14 @@ static struct request *idetape_next_rq_storage(ide_drive_t *drive) return (&tape->rq_stack[tape->rq_stack_index++]); } -static void idetape_init_pc(idetape_pc_t *pc) +static void idetape_init_pc(struct ide_atapi_pc *pc) { memset(pc->c, 0, 12); pc->retries = 0; pc->flags = 0; - pc->request_transfer = 0; - pc->buffer = pc->pc_buffer; - pc->buffer_size = IDETAPE_PC_BUFFER_SIZE; + pc->req_xfer = 0; + pc->buf = pc->pc_buf; + pc->buf_size = IDETAPE_PC_BUFFER_SIZE; pc->bh = NULL; pc->b_data = NULL; } @@ -668,7 +530,7 @@ static void idetape_init_pc(idetape_pc_t *pc) static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) { idetape_tape_t *tape = drive->driver_data; - idetape_pc_t *pc = tape->failed_pc; + struct ide_atapi_pc *pc = tape->failed_pc; tape->sense_key = sense[2] & 0xF; tape->asc = sense[12]; @@ -677,9 +539,9 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n", pc->c[0], tape->sense_key, tape->asc, tape->ascq); - /* Correct pc->actually_transferred by asking the tape. */ - if (test_bit(PC_DMA_ERROR, &pc->flags)) { - pc->actually_transferred = pc->request_transfer - + /* Correct pc->xferred by asking the tape. */ + if (pc->flags & PC_FLAG_DMA_ERROR) { + pc->xferred = pc->req_xfer - tape->blk_size * be32_to_cpu(get_unaligned((u32 *)&sense[3])); idetape_update_buffers(pc); @@ -697,53 +559,31 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) /* don't report an error, everything's ok */ pc->error = 0; /* don't retry read/write */ - set_bit(PC_ABORT, &pc->flags); + pc->flags |= PC_FLAG_ABORT; } } if (pc->c[0] == READ_6 && (sense[2] & 0x80)) { pc->error = IDETAPE_ERROR_FILEMARK; - set_bit(PC_ABORT, &pc->flags); + pc->flags |= PC_FLAG_ABORT; } if (pc->c[0] == WRITE_6) { if ((sense[2] & 0x40) || (tape->sense_key == 0xd && tape->asc == 0x0 && tape->ascq == 0x2)) { pc->error = IDETAPE_ERROR_EOD; - set_bit(PC_ABORT, &pc->flags); + pc->flags |= PC_FLAG_ABORT; } } if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) { if (tape->sense_key == 8) { pc->error = IDETAPE_ERROR_EOD; - set_bit(PC_ABORT, &pc->flags); + pc->flags |= PC_FLAG_ABORT; } - if (!test_bit(PC_ABORT, &pc->flags) && - pc->actually_transferred) + if (!(pc->flags & PC_FLAG_ABORT) && + pc->xferred) pc->retries = IDETAPE_MAX_PC_RETRIES + 1; } } -static void idetape_activate_next_stage(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - idetape_stage_t *stage = tape->next_stage; - struct request *rq = &stage->rq; - - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - if (stage == NULL) { - printk(KERN_ERR "ide-tape: bug: Trying to activate a non" - " existing stage\n"); - return; - } - - rq->rq_disk = tape->disk; - rq->buffer = NULL; - rq->special = (void *)stage->bh; - tape->active_data_rq = rq; - tape->active_stage = stage; - tape->next_stage = stage->next; -} - /* Free a stage along with its related buffers completely. */ static void __idetape_kfree_stage(idetape_stage_t *stage) { @@ -766,84 +606,12 @@ static void __idetape_kfree_stage(idetape_stage_t *stage) kfree(stage); } -static void idetape_kfree_stage(idetape_tape_t *tape, idetape_stage_t *stage) -{ - __idetape_kfree_stage(stage); -} - -/* - * Remove tape->first_stage from the pipeline. The caller should avoid race - * conditions. - */ -static void idetape_remove_stage_head(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - idetape_stage_t *stage; - - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - if (tape->first_stage == NULL) { - printk(KERN_ERR "ide-tape: bug: tape->first_stage is NULL\n"); - return; - } - if (tape->active_stage == tape->first_stage) { - printk(KERN_ERR "ide-tape: bug: Trying to free our active " - "pipeline stage\n"); - return; - } - stage = tape->first_stage; - tape->first_stage = stage->next; - idetape_kfree_stage(tape, stage); - tape->nr_stages--; - if (tape->first_stage == NULL) { - tape->last_stage = NULL; - if (tape->next_stage != NULL) - printk(KERN_ERR "ide-tape: bug: tape->next_stage !=" - " NULL\n"); - if (tape->nr_stages) - printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 " - "now\n"); - } -} - -/* - * This will free all the pipeline stages starting from new_last_stage->next - * to the end of the list, and point tape->last_stage to new_last_stage. - */ -static void idetape_abort_pipeline(ide_drive_t *drive, - idetape_stage_t *new_last_stage) -{ - idetape_tape_t *tape = drive->driver_data; - idetape_stage_t *stage = new_last_stage->next; - idetape_stage_t *nstage; - - debug_log(DBG_PROCS, "%s: Enter %s\n", tape->name, __func__); - - while (stage) { - nstage = stage->next; - idetape_kfree_stage(tape, stage); - --tape->nr_stages; - --tape->nr_pending_stages; - stage = nstage; - } - if (new_last_stage) - new_last_stage->next = NULL; - tape->last_stage = new_last_stage; - tape->next_stage = NULL; -} - -/* - * Finish servicing a request and insert a pending pipeline request into the - * main device queue. - */ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) { struct request *rq = HWGROUP(drive)->rq; idetape_tape_t *tape = drive->driver_data; unsigned long flags; int error; - int remove_stage = 0; - idetape_stage_t *active_stage; debug_log(DBG_PROCS, "Enter %s\n", __func__); @@ -863,56 +631,8 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) spin_lock_irqsave(&tape->lock, flags); - /* The request was a pipelined data transfer request */ - if (tape->active_data_rq == rq) { - active_stage = tape->active_stage; - tape->active_stage = NULL; - tape->active_data_rq = NULL; - tape->nr_pending_stages--; - if (rq->cmd[0] & REQ_IDETAPE_WRITE) { - remove_stage = 1; - if (error) { - set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); - if (error == IDETAPE_ERROR_EOD) - idetape_abort_pipeline(drive, - active_stage); - } - } else if (rq->cmd[0] & REQ_IDETAPE_READ) { - if (error == IDETAPE_ERROR_EOD) { - set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); - idetape_abort_pipeline(drive, active_stage); - } - } - if (tape->next_stage != NULL) { - idetape_activate_next_stage(drive); - - /* Insert the next request into the request queue. */ - (void)ide_do_drive_cmd(drive, tape->active_data_rq, - ide_end); - } else if (!error) { - /* - * This is a part of the feedback loop which tries to - * find the optimum number of stages. We are starting - * from a minimum maximum number of stages, and if we - * sense that the pipeline is empty, we try to increase - * it, until we reach the user compile time memory - * limit. - */ - int i = (tape->max_pipeline - tape->min_pipeline) / 10; - - tape->max_stages += max(i, 1); - tape->max_stages = max(tape->max_stages, - tape->min_pipeline); - tape->max_stages = min(tape->max_stages, - tape->max_pipeline); - } - } ide_end_drive_cmd(drive, 0, 0); - if (remove_stage) - idetape_remove_stage_head(drive); - if (tape->active_data_rq == NULL) - clear_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags); spin_unlock_irqrestore(&tape->lock, flags); return 0; } @@ -924,7 +644,7 @@ static ide_startstop_t idetape_request_sense_callback(ide_drive_t *drive) debug_log(DBG_PROCS, "Enter %s\n", __func__); if (!tape->pc->error) { - idetape_analyze_error(drive, tape->pc->buffer); + idetape_analyze_error(drive, tape->pc->buf); idetape_end_request(drive, 1, 0); } else { printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - " @@ -934,13 +654,13 @@ static ide_startstop_t idetape_request_sense_callback(ide_drive_t *drive) return ide_stopped; } -static void idetape_create_request_sense_cmd(idetape_pc_t *pc) +static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc) { idetape_init_pc(pc); pc->c[0] = REQUEST_SENSE; pc->c[4] = 20; - pc->request_transfer = 20; - pc->callback = &idetape_request_sense_callback; + pc->req_xfer = 20; + pc->idetape_callback = &idetape_request_sense_callback; } static void idetape_init_rq(struct request *rq, u8 cmd) @@ -965,7 +685,7 @@ static void idetape_init_rq(struct request *rq, u8 cmd) * handling functions should queue request to the lower level part and wait for * their completion using idetape_queue_pc_tail or idetape_queue_rw_tail. */ -static void idetape_queue_pc_head(ide_drive_t *drive, idetape_pc_t *pc, +static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, struct request *rq) { struct ide_tape_obj *tape = drive->driver_data; @@ -984,14 +704,14 @@ static void idetape_queue_pc_head(ide_drive_t *drive, idetape_pc_t *pc, static ide_startstop_t idetape_retry_pc (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - idetape_pc_t *pc; + struct ide_atapi_pc *pc; struct request *rq; (void)ide_read_error(drive); pc = idetape_next_pc_storage(drive); rq = idetape_next_rq_storage(drive); idetape_create_request_sense_cmd(pc); - set_bit(IDETAPE_IGNORE_DSC, &tape->flags); + set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags); idetape_queue_pc_head(drive, pc, rq); return ide_stopped; } @@ -1010,7 +730,7 @@ static void idetape_postpone_request(ide_drive_t *drive) ide_stall_queue(drive, tape->dsc_poll_freq); } -typedef void idetape_io_buf(ide_drive_t *, idetape_pc_t *, unsigned int); +typedef void idetape_io_buf(ide_drive_t *, struct ide_atapi_pc *, unsigned int); /* * This is the usual interrupt handler which will be called during a packet @@ -1023,7 +743,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; - idetape_pc_t *pc = tape->pc; + struct ide_atapi_pc *pc = tape->pc; xfer_func_t *xferfunc; idetape_io_buf *iobuf; unsigned int temp; @@ -1038,8 +758,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) /* Clear the interrupt */ stat = ide_read_status(drive); - if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { - if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) { + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + if (hwif->dma_ops->dma_end(drive) || (stat & ERR_STAT)) { /* * A DMA error is sometimes expected. For example, * if the tape is crossing a filemark during a @@ -1061,9 +781,9 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) * data transfer will occur, but no DMA error. * (AS, 19 Apr 2001) */ - set_bit(PC_DMA_ERROR, &pc->flags); + pc->flags |= PC_FLAG_DMA_ERROR; } else { - pc->actually_transferred = pc->request_transfer; + pc->xferred = pc->req_xfer; idetape_update_buffers(pc); } debug_log(DBG_PROCS, "DMA finished\n"); @@ -1073,9 +793,9 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) /* No more interrupts */ if ((stat & DRQ_STAT) == 0) { debug_log(DBG_SENSE, "Packet command completed, %d bytes" - " transferred\n", pc->actually_transferred); + " transferred\n", pc->xferred); - clear_bit(PC_DMA_IN_PROGRESS, &pc->flags); + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable(); #if SIMULATE_ERRORS @@ -1088,7 +808,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) #endif if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE) stat &= ~ERR_STAT; - if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) { + if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { /* Error detected */ debug_log(DBG_ERR, "%s: I/O error\n", tape->name); @@ -1104,7 +824,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) return idetape_retry_pc(drive); } pc->error = 0; - if (test_bit(PC_WAIT_FOR_DSC, &pc->flags) && + if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & SEEK_STAT) == 0) { /* Media access command */ tape->dsc_polling_start = jiffies; @@ -1117,9 +837,11 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) if (tape->failed_pc == pc) tape->failed_pc = NULL; /* Command finished - Call the callback function */ - return pc->callback(drive); + return pc->idetape_callback(drive); } - if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { + + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; printk(KERN_ERR "ide-tape: The tape wants to issue more " "interrupts in DMA mode\n"); printk(KERN_ERR "ide-tape: DMA disabled, reverting to PIO\n"); @@ -1127,16 +849,16 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) return ide_do_reset(drive); } /* Get the number of bytes to transfer on this interrupt. */ - bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) | - hwif->INB(IDE_BCOUNTL_REG); + bcount = (hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]) << 8) | + hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]); - ireason = hwif->INB(IDE_IREASON_REG); + ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); if (ireason & CD) { printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__); return ide_do_reset(drive); } - if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) { + if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { /* Hopefully, we will never get here */ printk(KERN_ERR "ide-tape: We wanted to %s, ", (ireason & IO) ? "Write" : "Read"); @@ -1144,15 +866,15 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) (ireason & IO) ? "Read" : "Write"); return ide_do_reset(drive); } - if (!test_bit(PC_WRITING, &pc->flags)) { + if (!(pc->flags & PC_FLAG_WRITING)) { /* Reading - Check that we have enough space */ - temp = pc->actually_transferred + bcount; - if (temp > pc->request_transfer) { - if (temp > pc->buffer_size) { + temp = pc->xferred + bcount; + if (temp > pc->req_xfer) { + if (temp > pc->buf_size) { printk(KERN_ERR "ide-tape: The tape wants to " "send us more data than expected " "- discarding data\n"); - idetape_discard_data(drive, bcount); + ide_atapi_discard_data(drive, bcount); ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); return ide_started; @@ -1170,11 +892,11 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) if (pc->bh) iobuf(drive, pc, bcount); else - xferfunc(drive, pc->current_position, bcount); + xferfunc(drive, pc->cur_pos, bcount); /* Update the current position */ - pc->actually_transferred += bcount; - pc->current_position += bcount; + pc->xferred += bcount; + pc->cur_pos += bcount; debug_log(DBG_SENSE, "[cmd %x] transferred %d bytes on that intr.\n", pc->c[0], bcount); @@ -1224,7 +946,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; - idetape_pc_t *pc = tape->pc; + struct ide_atapi_pc *pc = tape->pc; int retries = 100; ide_startstop_t startstop; u8 ireason; @@ -1234,12 +956,12 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) "yet DRQ isn't asserted\n"); return startstop; } - ireason = hwif->INB(IDE_IREASON_REG); + ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while issuing " "a packet command, retrying\n"); udelay(100); - ireason = hwif->INB(IDE_IREASON_REG); + ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); if (retries == 0) { printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while " "issuing a packet command, ignoring\n"); @@ -1256,15 +978,16 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); #ifdef CONFIG_BLK_DEV_IDEDMA /* Begin DMA, if necessary */ - if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) - hwif->dma_start(drive); + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) + hwif->dma_ops->dma_start(drive); #endif /* Send the actual packet */ HWIF(drive)->atapi_output_bytes(drive, pc->c, 12); return ide_started; } -static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc) +static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, + struct ide_atapi_pc *pc) { ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; @@ -1283,13 +1006,13 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc) tape->pc = pc; if (pc->retries > IDETAPE_MAX_PC_RETRIES || - test_bit(PC_ABORT, &pc->flags)) { + (pc->flags & PC_FLAG_ABORT)) { /* * We will "abort" retrying a packet command in case legitimate * error code was received (crossing a filemark, or end of the * media, for example). */ - if (!test_bit(PC_ABORT, &pc->flags)) { + if (!(pc->flags & PC_FLAG_ABORT)) { if (!(pc->c[0] == TEST_UNIT_READY && tape->sense_key == 2 && tape->asc == 4 && (tape->ascq == 1 || tape->ascq == 8))) { @@ -1304,36 +1027,38 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc) pc->error = IDETAPE_ERROR_GENERAL; } tape->failed_pc = NULL; - return pc->callback(drive); + return pc->idetape_callback(drive); } debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); pc->retries++; /* We haven't transferred any data yet */ - pc->actually_transferred = 0; - pc->current_position = pc->buffer; + pc->xferred = 0; + pc->cur_pos = pc->buf; /* Request to transfer the entire buffer at once */ - bcount = pc->request_transfer; + bcount = pc->req_xfer; - if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) { + if (pc->flags & PC_FLAG_DMA_ERROR) { + pc->flags &= ~PC_FLAG_DMA_ERROR; printk(KERN_WARNING "ide-tape: DMA disabled, " "reverting to PIO\n"); ide_dma_off(drive); } - if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma) - dma_ok = !hwif->dma_setup(drive); + if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) + dma_ok = !hwif->dma_ops->dma_setup(drive); ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); - if (dma_ok) /* Will begin DMA later */ - set_bit(PC_DMA_IN_PROGRESS, &pc->flags); - if (test_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags)) { + if (dma_ok) + /* Will begin DMA later */ + pc->flags |= PC_FLAG_DMA_IN_PROGRESS; + if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags)) { ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc, IDETAPE_WAIT_CMD, NULL); return ide_started; } else { - hwif->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); + hwif->OUTB(WIN_PACKETCMD, hwif->io_ports[IDE_COMMAND_OFFSET]); return idetape_transfer_pc(drive); } } @@ -1349,7 +1074,7 @@ static ide_startstop_t idetape_pc_callback(ide_drive_t *drive) } /* A mode sense command is used to "sense" tape parameters. */ -static void idetape_create_mode_sense_cmd(idetape_pc_t *pc, u8 page_code) +static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code) { idetape_init_pc(pc); pc->c[0] = MODE_SENSE; @@ -1368,81 +1093,18 @@ static void idetape_create_mode_sense_cmd(idetape_pc_t *pc, u8 page_code) /* We will just discard data in that case */ pc->c[4] = 255; if (page_code == IDETAPE_BLOCK_DESCRIPTOR) - pc->request_transfer = 12; + pc->req_xfer = 12; else if (page_code == IDETAPE_CAPABILITIES_PAGE) - pc->request_transfer = 24; + pc->req_xfer = 24; else - pc->request_transfer = 50; - pc->callback = &idetape_pc_callback; -} - -static void idetape_calculate_speeds(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - - if (time_after(jiffies, - tape->controlled_pipeline_head_time + 120 * HZ)) { - tape->controlled_previous_pipeline_head = - tape->controlled_last_pipeline_head; - tape->controlled_previous_head_time = - tape->controlled_pipeline_head_time; - tape->controlled_last_pipeline_head = tape->pipeline_head; - tape->controlled_pipeline_head_time = jiffies; - } - if (time_after(jiffies, tape->controlled_pipeline_head_time + 60 * HZ)) - tape->controlled_pipeline_head_speed = (tape->pipeline_head - - tape->controlled_last_pipeline_head) * 32 * HZ / - (jiffies - tape->controlled_pipeline_head_time); - else if (time_after(jiffies, tape->controlled_previous_head_time)) - tape->controlled_pipeline_head_speed = (tape->pipeline_head - - tape->controlled_previous_pipeline_head) * 32 * - HZ / (jiffies - tape->controlled_previous_head_time); - - if (tape->nr_pending_stages < tape->max_stages/*- 1 */) { - /* -1 for read mode error recovery */ - if (time_after(jiffies, tape->uncontrolled_previous_head_time + - 10 * HZ)) { - tape->uncontrolled_pipeline_head_time = jiffies; - tape->uncontrolled_pipeline_head_speed = - (tape->pipeline_head - - tape->uncontrolled_previous_pipeline_head) * - 32 * HZ / (jiffies - - tape->uncontrolled_previous_head_time); - } - } else { - tape->uncontrolled_previous_head_time = jiffies; - tape->uncontrolled_previous_pipeline_head = tape->pipeline_head; - if (time_after(jiffies, tape->uncontrolled_pipeline_head_time + - 30 * HZ)) - tape->uncontrolled_pipeline_head_time = jiffies; - - } - tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed, - tape->controlled_pipeline_head_speed); - - if (tape->speed_control == 1) { - if (tape->nr_pending_stages >= tape->max_stages / 2) - tape->max_insert_speed = tape->pipeline_head_speed + - (1100 - tape->pipeline_head_speed) * 2 * - (tape->nr_pending_stages - tape->max_stages / 2) - / tape->max_stages; - else - tape->max_insert_speed = 500 + - (tape->pipeline_head_speed - 500) * 2 * - tape->nr_pending_stages / tape->max_stages; - - if (tape->nr_pending_stages >= tape->max_stages * 99 / 100) - tape->max_insert_speed = 5000; - } else - tape->max_insert_speed = tape->speed_control; - - tape->max_insert_speed = max(tape->max_insert_speed, 500); + pc->req_xfer = 50; + pc->idetape_callback = &idetape_pc_callback; } static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - idetape_pc_t *pc = tape->pc; + struct ide_atapi_pc *pc = tape->pc; u8 stat; stat = ide_read_status(drive); @@ -1463,27 +1125,17 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) pc->error = IDETAPE_ERROR_GENERAL; tape->failed_pc = NULL; } - return pc->callback(drive); + return pc->idetape_callback(drive); } static ide_startstop_t idetape_rw_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct request *rq = HWGROUP(drive)->rq; - int blocks = tape->pc->actually_transferred / tape->blk_size; + int blocks = tape->pc->xferred / tape->blk_size; tape->avg_size += blocks * tape->blk_size; - tape->insert_size += blocks * tape->blk_size; - if (tape->insert_size > 1024 * 1024) - tape->measure_insert_time = 1; - if (tape->measure_insert_time) { - tape->measure_insert_time = 0; - tape->insert_time = jiffies; - tape->insert_size = 0; - } - if (time_after(jiffies, tape->insert_time)) - tape->insert_speed = tape->insert_size / 1024 * HZ / - (jiffies - tape->insert_time); + if (time_after_eq(jiffies, tape->avg_time + HZ)) { tape->avg_speed = tape->avg_size * HZ / (jiffies - tape->avg_time) / 1024; @@ -1502,47 +1154,49 @@ static ide_startstop_t idetape_rw_callback(ide_drive_t *drive) return ide_stopped; } -static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, +static void idetape_create_read_cmd(idetape_tape_t *tape, + struct ide_atapi_pc *pc, unsigned int length, struct idetape_bh *bh) { idetape_init_pc(pc); pc->c[0] = READ_6; put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->callback = &idetape_rw_callback; + pc->idetape_callback = &idetape_rw_callback; pc->bh = bh; atomic_set(&bh->b_count, 0); - pc->buffer = NULL; - pc->buffer_size = length * tape->blk_size; - pc->request_transfer = pc->buffer_size; - if (pc->request_transfer == tape->stage_size) - set_bit(PC_DMA_RECOMMENDED, &pc->flags); + pc->buf = NULL; + pc->buf_size = length * tape->blk_size; + pc->req_xfer = pc->buf_size; + if (pc->req_xfer == tape->stage_size) + pc->flags |= PC_FLAG_DMA_RECOMMENDED; } -static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, +static void idetape_create_write_cmd(idetape_tape_t *tape, + struct ide_atapi_pc *pc, unsigned int length, struct idetape_bh *bh) { idetape_init_pc(pc); pc->c[0] = WRITE_6; put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->callback = &idetape_rw_callback; - set_bit(PC_WRITING, &pc->flags); + pc->idetape_callback = &idetape_rw_callback; + pc->flags |= PC_FLAG_WRITING; pc->bh = bh; pc->b_data = bh->b_data; pc->b_count = atomic_read(&bh->b_count); - pc->buffer = NULL; - pc->buffer_size = length * tape->blk_size; - pc->request_transfer = pc->buffer_size; - if (pc->request_transfer == tape->stage_size) - set_bit(PC_DMA_RECOMMENDED, &pc->flags); + pc->buf = NULL; + pc->buf_size = length * tape->blk_size; + pc->req_xfer = pc->buf_size; + if (pc->req_xfer == tape->stage_size) + pc->flags |= PC_FLAG_DMA_RECOMMENDED; } static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct request *rq, sector_t block) { idetape_tape_t *tape = drive->driver_data; - idetape_pc_t *pc = NULL; + struct ide_atapi_pc *pc = NULL; struct request *postponed_rq = tape->postponed_rq; u8 stat; @@ -1579,18 +1233,14 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, stat = ide_read_status(drive); if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2)) - set_bit(IDETAPE_IGNORE_DSC, &tape->flags); + set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags); if (drive->post_reset == 1) { - set_bit(IDETAPE_IGNORE_DSC, &tape->flags); + set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags); drive->post_reset = 0; } - if (time_after(jiffies, tape->insert_time)) - tape->insert_speed = tape->insert_size / 1024 * HZ / - (jiffies - tape->insert_time); - idetape_calculate_speeds(drive); - if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) && + if (!test_and_clear_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags) && (stat & SEEK_STAT) == 0) { if (postponed_rq == NULL) { tape->dsc_polling_start = jiffies; @@ -1613,23 +1263,19 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, return ide_stopped; } if (rq->cmd[0] & REQ_IDETAPE_READ) { - tape->buffer_head++; - tape->postpone_cnt = 0; pc = idetape_next_pc_storage(drive); idetape_create_read_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special); goto out; } if (rq->cmd[0] & REQ_IDETAPE_WRITE) { - tape->buffer_head++; - tape->postpone_cnt = 0; pc = idetape_next_pc_storage(drive); idetape_create_write_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special); goto out; } if (rq->cmd[0] & REQ_IDETAPE_PC1) { - pc = (idetape_pc_t *) rq->buffer; + pc = (struct ide_atapi_pc *) rq->buffer; rq->cmd[0] &= ~(REQ_IDETAPE_PC1); rq->cmd[0] |= REQ_IDETAPE_PC2; goto out; @@ -1643,16 +1289,6 @@ out: return idetape_issue_pc(drive, pc); } -/* Pipeline related functions */ -static inline int idetape_pipeline_active(idetape_tape_t *tape) -{ - int rc1, rc2; - - rc1 = test_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags); - rc2 = (tape->active_data_rq != NULL); - return rc1; -} - /* * The function below uses __get_free_page to allocate a pipeline stage, along * with all the necessary small buffers which together make a buffer of size @@ -1661,9 +1297,6 @@ static inline int idetape_pipeline_active(idetape_tape_t *tape) * * It returns a pointer to the new allocated stage, or NULL if we can't (or * don't want to) allocate a stage. - * - * Pipeline stages are optional and are used to increase performance. If we - * can't allocate them, we'll manage without them. */ static idetape_stage_t *__idetape_kmalloc_stage(idetape_tape_t *tape, int full, int clear) @@ -1731,23 +1364,8 @@ abort: return NULL; } -static idetape_stage_t *idetape_kmalloc_stage(idetape_tape_t *tape) -{ - idetape_stage_t *cache_stage = tape->cache_stage; - - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - if (tape->nr_stages >= tape->max_stages) - return NULL; - if (cache_stage != NULL) { - tape->cache_stage = NULL; - return cache_stage; - } - return __idetape_kmalloc_stage(tape, 0, 0); -} - static int idetape_copy_stage_from_user(idetape_tape_t *tape, - idetape_stage_t *stage, const char __user *buf, int n) + const char __user *buf, int n) { struct idetape_bh *bh = tape->bh; int count; @@ -1779,7 +1397,7 @@ static int idetape_copy_stage_from_user(idetape_tape_t *tape, } static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf, - idetape_stage_t *stage, int n) + int n) { struct idetape_bh *bh = tape->bh; int count; @@ -1823,65 +1441,10 @@ static void idetape_init_merge_stage(idetape_tape_t *tape) } } -static void idetape_switch_buffers(idetape_tape_t *tape, idetape_stage_t *stage) -{ - struct idetape_bh *tmp; - - tmp = stage->bh; - stage->bh = tape->merge_stage->bh; - tape->merge_stage->bh = tmp; - idetape_init_merge_stage(tape); -} - -/* Add a new stage at the end of the pipeline. */ -static void idetape_add_stage_tail(ide_drive_t *drive, idetape_stage_t *stage) -{ - idetape_tape_t *tape = drive->driver_data; - unsigned long flags; - - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - spin_lock_irqsave(&tape->lock, flags); - stage->next = NULL; - if (tape->last_stage != NULL) - tape->last_stage->next = stage; - else - tape->first_stage = stage; - tape->next_stage = stage; - tape->last_stage = stage; - if (tape->next_stage == NULL) - tape->next_stage = tape->last_stage; - tape->nr_stages++; - tape->nr_pending_stages++; - spin_unlock_irqrestore(&tape->lock, flags); -} - -/* Install a completion in a pending request and sleep until it is serviced. The - * caller should ensure that the request will not be serviced before we install - * the completion (usually by disabling interrupts). - */ -static void idetape_wait_for_request(ide_drive_t *drive, struct request *rq) -{ - DECLARE_COMPLETION_ONSTACK(wait); - idetape_tape_t *tape = drive->driver_data; - - if (rq == NULL || !blk_special_request(rq)) { - printk(KERN_ERR "ide-tape: bug: Trying to sleep on non-valid" - " request\n"); - return; - } - rq->end_io_data = &wait; - rq->end_io = blk_end_sync_rq; - spin_unlock_irq(&tape->lock); - wait_for_completion(&wait); - /* The stage and its struct request have been deallocated */ - spin_lock_irq(&tape->lock); -} - static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - u8 *readpos = tape->pc->buffer; + u8 *readpos = tape->pc->buf; debug_log(DBG_PROCS, "Enter %s\n", __func__); @@ -1894,7 +1457,7 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive) if (readpos[0] & 0x4) { printk(KERN_INFO "ide-tape: Block location is unknown" "to the tape\n"); - clear_bit(IDETAPE_ADDRESS_VALID, &tape->flags); + clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags); idetape_end_request(drive, 0, 0); } else { debug_log(DBG_SENSE, "Block Location - %u\n", @@ -1903,7 +1466,7 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive) tape->partition = readpos[1]; tape->first_frame = be32_to_cpu(*(u32 *)&readpos[4]); - set_bit(IDETAPE_ADDRESS_VALID, &tape->flags); + set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags); idetape_end_request(drive, 1, 0); } } else { @@ -1917,20 +1480,20 @@ static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive) * writing a filemark otherwise. */ static void idetape_create_write_filemark_cmd(ide_drive_t *drive, - idetape_pc_t *pc, int write_filemark) + struct ide_atapi_pc *pc, int write_filemark) { idetape_init_pc(pc); pc->c[0] = WRITE_FILEMARKS; pc->c[4] = write_filemark; - set_bit(PC_WAIT_FOR_DSC, &pc->flags); - pc->callback = &idetape_pc_callback; + pc->flags |= PC_FLAG_WAIT_FOR_DSC; + pc->idetape_callback = &idetape_pc_callback; } -static void idetape_create_test_unit_ready_cmd(idetape_pc_t *pc) +static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc) { idetape_init_pc(pc); pc->c[0] = TEST_UNIT_READY; - pc->callback = &idetape_pc_callback; + pc->idetape_callback = &idetape_pc_callback; } /* @@ -1946,7 +1509,7 @@ static void idetape_create_test_unit_ready_cmd(idetape_pc_t *pc) * to the request list without waiting for it to be serviced! In that case, we * usually use idetape_queue_pc_head(). */ -static int __idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc) +static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct ide_tape_obj *tape = drive->driver_data; struct request rq; @@ -1957,28 +1520,28 @@ static int __idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc) return ide_do_drive_cmd(drive, &rq, ide_wait); } -static void idetape_create_load_unload_cmd(ide_drive_t *drive, idetape_pc_t *pc, - int cmd) +static void idetape_create_load_unload_cmd(ide_drive_t *drive, + struct ide_atapi_pc *pc, int cmd) { idetape_init_pc(pc); pc->c[0] = START_STOP; pc->c[4] = cmd; - set_bit(PC_WAIT_FOR_DSC, &pc->flags); - pc->callback = &idetape_pc_callback; + pc->flags |= PC_FLAG_WAIT_FOR_DSC; + pc->idetape_callback = &idetape_pc_callback; } static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) { idetape_tape_t *tape = drive->driver_data; - idetape_pc_t pc; + struct ide_atapi_pc pc; int load_attempted = 0; /* Wait for the tape to become ready */ - set_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags); + set_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags); timeout += jiffies; while (time_before(jiffies, timeout)) { idetape_create_test_unit_ready_cmd(&pc); - if (!__idetape_queue_pc_tail(drive, &pc)) + if (!idetape_queue_pc_tail(drive, &pc)) return 0; if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2) || (tape->asc == 0x3A)) { @@ -1987,7 +1550,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) return -ENOMEDIUM; idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK); - __idetape_queue_pc_tail(drive, &pc); + idetape_queue_pc_tail(drive, &pc); load_attempted = 1; /* not about to be ready */ } else if (!(tape->sense_key == 2 && tape->asc == 4 && @@ -1998,14 +1561,9 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) return -EIO; } -static int idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc) -{ - return __idetape_queue_pc_tail(drive, pc); -} - static int idetape_flush_tape_buffers(ide_drive_t *drive) { - idetape_pc_t pc; + struct ide_atapi_pc pc; int rc; idetape_create_write_filemark_cmd(drive, &pc, 0); @@ -2016,18 +1574,18 @@ static int idetape_flush_tape_buffers(ide_drive_t *drive) return 0; } -static void idetape_create_read_position_cmd(idetape_pc_t *pc) +static void idetape_create_read_position_cmd(struct ide_atapi_pc *pc) { idetape_init_pc(pc); pc->c[0] = READ_POSITION; - pc->request_transfer = 20; - pc->callback = &idetape_read_position_callback; + pc->req_xfer = 20; + pc->idetape_callback = &idetape_read_position_callback; } static int idetape_read_position(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - idetape_pc_t pc; + struct ide_atapi_pc pc; int position; debug_log(DBG_PROCS, "Enter %s\n", __func__); @@ -2039,7 +1597,8 @@ static int idetape_read_position(ide_drive_t *drive) return position; } -static void idetape_create_locate_cmd(ide_drive_t *drive, idetape_pc_t *pc, +static void idetape_create_locate_cmd(ide_drive_t *drive, + struct ide_atapi_pc *pc, unsigned int block, u8 partition, int skip) { idetape_init_pc(pc); @@ -2047,12 +1606,12 @@ static void idetape_create_locate_cmd(ide_drive_t *drive, idetape_pc_t *pc, pc->c[1] = 2; put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]); pc->c[8] = partition; - set_bit(PC_WAIT_FOR_DSC, &pc->flags); - pc->callback = &idetape_pc_callback; + pc->flags |= PC_FLAG_WAIT_FOR_DSC; + pc->idetape_callback = &idetape_pc_callback; } -static int idetape_create_prevent_cmd(ide_drive_t *drive, idetape_pc_t *pc, - int prevent) +static int idetape_create_prevent_cmd(ide_drive_t *drive, + struct ide_atapi_pc *pc, int prevent) { idetape_tape_t *tape = drive->driver_data; @@ -2063,54 +1622,27 @@ static int idetape_create_prevent_cmd(ide_drive_t *drive, idetape_pc_t *pc, idetape_init_pc(pc); pc->c[0] = ALLOW_MEDIUM_REMOVAL; pc->c[4] = prevent; - pc->callback = &idetape_pc_callback; + pc->idetape_callback = &idetape_pc_callback; return 1; } static int __idetape_discard_read_pipeline(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - unsigned long flags; - int cnt; if (tape->chrdev_dir != IDETAPE_DIR_READ) return 0; - /* Remove merge stage. */ - cnt = tape->merge_stage_size / tape->blk_size; - if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags)) - ++cnt; /* Filemarks count as 1 sector */ + clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags); tape->merge_stage_size = 0; if (tape->merge_stage != NULL) { __idetape_kfree_stage(tape->merge_stage); tape->merge_stage = NULL; } - /* Clear pipeline flags. */ - clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); tape->chrdev_dir = IDETAPE_DIR_NONE; - /* Remove pipeline stages. */ - if (tape->first_stage == NULL) - return 0; - - spin_lock_irqsave(&tape->lock, flags); - tape->next_stage = NULL; - if (idetape_pipeline_active(tape)) - idetape_wait_for_request(drive, tape->active_data_rq); - spin_unlock_irqrestore(&tape->lock, flags); - - while (tape->first_stage != NULL) { - struct request *rq_ptr = &tape->first_stage->rq; - - cnt += rq_ptr->nr_sectors - rq_ptr->current_nr_sectors; - if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK) - ++cnt; - idetape_remove_stage_head(drive); - } - tape->nr_pending_stages = 0; - tape->max_stages = tape->min_pipeline; - return cnt; + return 0; } /* @@ -2124,7 +1656,7 @@ static int idetape_position_tape(ide_drive_t *drive, unsigned int block, { idetape_tape_t *tape = drive->driver_data; int retval; - idetape_pc_t pc; + struct ide_atapi_pc pc; if (tape->chrdev_dir == IDETAPE_DIR_READ) __idetape_discard_read_pipeline(drive); @@ -2169,12 +1701,6 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); - if (idetape_pipeline_active(tape)) { - printk(KERN_ERR "ide-tape: bug: the pipeline is active in %s\n", - __func__); - return (0); - } - idetape_init_rq(&rq, cmd); rq.rq_disk = tape->disk; rq.special = (void *)bh; @@ -2193,161 +1719,52 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, return (tape->blk_size * (blocks-rq.current_nr_sectors)); } -/* start servicing the pipeline stages, starting from tape->next_stage. */ -static void idetape_plug_pipeline(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - - if (tape->next_stage == NULL) - return; - if (!idetape_pipeline_active(tape)) { - set_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags); - idetape_activate_next_stage(drive); - (void) ide_do_drive_cmd(drive, tape->active_data_rq, ide_end); - } -} - -static void idetape_create_inquiry_cmd(idetape_pc_t *pc) +static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc) { idetape_init_pc(pc); pc->c[0] = INQUIRY; pc->c[4] = 254; - pc->request_transfer = 254; - pc->callback = &idetape_pc_callback; + pc->req_xfer = 254; + pc->idetape_callback = &idetape_pc_callback; } -static void idetape_create_rewind_cmd(ide_drive_t *drive, idetape_pc_t *pc) +static void idetape_create_rewind_cmd(ide_drive_t *drive, + struct ide_atapi_pc *pc) { idetape_init_pc(pc); pc->c[0] = REZERO_UNIT; - set_bit(PC_WAIT_FOR_DSC, &pc->flags); - pc->callback = &idetape_pc_callback; + pc->flags |= PC_FLAG_WAIT_FOR_DSC; + pc->idetape_callback = &idetape_pc_callback; } -static void idetape_create_erase_cmd(idetape_pc_t *pc) +static void idetape_create_erase_cmd(struct ide_atapi_pc *pc) { idetape_init_pc(pc); pc->c[0] = ERASE; pc->c[1] = 1; - set_bit(PC_WAIT_FOR_DSC, &pc->flags); - pc->callback = &idetape_pc_callback; + pc->flags |= PC_FLAG_WAIT_FOR_DSC; + pc->idetape_callback = &idetape_pc_callback; } -static void idetape_create_space_cmd(idetape_pc_t *pc, int count, u8 cmd) +static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) { idetape_init_pc(pc); pc->c[0] = SPACE; put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]); pc->c[1] = cmd; - set_bit(PC_WAIT_FOR_DSC, &pc->flags); - pc->callback = &idetape_pc_callback; + pc->flags |= PC_FLAG_WAIT_FOR_DSC; + pc->idetape_callback = &idetape_pc_callback; } -static void idetape_wait_first_stage(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - unsigned long flags; - - if (tape->first_stage == NULL) - return; - spin_lock_irqsave(&tape->lock, flags); - if (tape->active_stage == tape->first_stage) - idetape_wait_for_request(drive, tape->active_data_rq); - spin_unlock_irqrestore(&tape->lock, flags); -} - -/* - * Try to add a character device originated write request to our pipeline. In - * case we don't succeed, we revert to non-pipelined operation mode for this - * request. In order to accomplish that, we - * - * 1. Try to allocate a new pipeline stage. - * 2. If we can't, wait for more and more requests to be serviced and try again - * each time. - * 3. If we still can't allocate a stage, fallback to non-pipelined operation - * mode for this request. - */ +/* Queue up a character device originated write request. */ static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) { idetape_tape_t *tape = drive->driver_data; - idetape_stage_t *new_stage; - unsigned long flags; - struct request *rq; debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - /* Attempt to allocate a new stage. Beware possible race conditions. */ - while ((new_stage = idetape_kmalloc_stage(tape)) == NULL) { - spin_lock_irqsave(&tape->lock, flags); - if (idetape_pipeline_active(tape)) { - idetape_wait_for_request(drive, tape->active_data_rq); - spin_unlock_irqrestore(&tape->lock, flags); - } else { - spin_unlock_irqrestore(&tape->lock, flags); - idetape_plug_pipeline(drive); - if (idetape_pipeline_active(tape)) - continue; - /* - * The machine is short on memory. Fallback to non- - * pipelined operation mode for this request. - */ - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, - blocks, tape->merge_stage->bh); - } - } - rq = &new_stage->rq; - idetape_init_rq(rq, REQ_IDETAPE_WRITE); - /* Doesn't actually matter - We always assume sequential access */ - rq->sector = tape->first_frame; - rq->current_nr_sectors = blocks; - rq->nr_sectors = blocks; - - idetape_switch_buffers(tape, new_stage); - idetape_add_stage_tail(drive, new_stage); - tape->pipeline_head++; - idetape_calculate_speeds(drive); - - /* - * Estimate whether the tape has stopped writing by checking if our - * write pipeline is currently empty. If we are not writing anymore, - * wait for the pipeline to be almost completely full (90%) before - * starting to service requests, so that we will be able to keep up with - * the higher speeds of the tape. - */ - if (!idetape_pipeline_active(tape)) { - if (tape->nr_stages >= tape->max_stages * 9 / 10 || - tape->nr_stages >= tape->max_stages - - tape->uncontrolled_pipeline_head_speed * 3 * 1024 / - tape->blk_size) { - tape->measure_insert_time = 1; - tape->insert_time = jiffies; - tape->insert_size = 0; - tape->insert_speed = 0; - idetape_plug_pipeline(drive); - } - } - if (test_and_clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags)) - /* Return a deferred error */ - return -EIO; - return blocks; -} - -/* - * Wait until all pending pipeline requests are serviced. Typically called on - * device close. - */ -static void idetape_wait_for_pipeline(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - unsigned long flags; - - while (tape->next_stage || idetape_pipeline_active(tape)) { - idetape_plug_pipeline(drive); - spin_lock_irqsave(&tape->lock, flags); - if (idetape_pipeline_active(tape)) - idetape_wait_for_request(drive, tape->active_data_rq); - spin_unlock_irqrestore(&tape->lock, flags); - } + return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, + blocks, tape->merge_stage->bh); } static void idetape_empty_write_pipeline(ide_drive_t *drive) @@ -2397,58 +1814,17 @@ static void idetape_empty_write_pipeline(ide_drive_t *drive) (void) idetape_add_chrdev_write_request(drive, blocks); tape->merge_stage_size = 0; } - idetape_wait_for_pipeline(drive); if (tape->merge_stage != NULL) { __idetape_kfree_stage(tape->merge_stage); tape->merge_stage = NULL; } - clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); tape->chrdev_dir = IDETAPE_DIR_NONE; - - /* - * On the next backup, perform the feedback loop again. (I don't want to - * keep sense information between backups, as some systems are - * constantly on, and the system load can be totally different on the - * next backup). - */ - tape->max_stages = tape->min_pipeline; - if (tape->first_stage != NULL || - tape->next_stage != NULL || - tape->last_stage != NULL || - tape->nr_stages != 0) { - printk(KERN_ERR "ide-tape: ide-tape pipeline bug, " - "first_stage %p, next_stage %p, " - "last_stage %p, nr_stages %d\n", - tape->first_stage, tape->next_stage, - tape->last_stage, tape->nr_stages); - } } -static void idetape_restart_speed_control(ide_drive_t *drive) +static int idetape_init_read(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - - tape->restart_speed_control_req = 0; - tape->pipeline_head = 0; - tape->controlled_last_pipeline_head = 0; - tape->controlled_previous_pipeline_head = 0; - tape->uncontrolled_previous_pipeline_head = 0; - tape->controlled_pipeline_head_speed = 5000; - tape->pipeline_head_speed = 5000; - tape->uncontrolled_pipeline_head_speed = 0; - tape->controlled_pipeline_head_time = - tape->uncontrolled_pipeline_head_time = jiffies; - tape->controlled_previous_head_time = - tape->uncontrolled_previous_head_time = jiffies; -} - -static int idetape_init_read(ide_drive_t *drive, int max_stages) -{ - idetape_tape_t *tape = drive->driver_data; - idetape_stage_t *new_stage; - struct request rq; int bytes_read; - u16 blocks = *(u16 *)&tape->caps[12]; /* Initialize read operation */ if (tape->chrdev_dir != IDETAPE_DIR_READ) { @@ -2484,85 +1860,25 @@ static int idetape_init_read(ide_drive_t *drive, int max_stages) } } } - if (tape->restart_speed_control_req) - idetape_restart_speed_control(drive); - idetape_init_rq(&rq, REQ_IDETAPE_READ); - rq.sector = tape->first_frame; - rq.nr_sectors = blocks; - rq.current_nr_sectors = blocks; - if (!test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags) && - tape->nr_stages < max_stages) { - new_stage = idetape_kmalloc_stage(tape); - while (new_stage != NULL) { - new_stage->rq = rq; - idetape_add_stage_tail(drive, new_stage); - if (tape->nr_stages >= max_stages) - break; - new_stage = idetape_kmalloc_stage(tape); - } - } - if (!idetape_pipeline_active(tape)) { - if (tape->nr_pending_stages >= 3 * max_stages / 4) { - tape->measure_insert_time = 1; - tape->insert_time = jiffies; - tape->insert_size = 0; - tape->insert_speed = 0; - idetape_plug_pipeline(drive); - } - } + return 0; } -/* - * Called from idetape_chrdev_read() to service a character device read request - * and add read-ahead requests to our pipeline. - */ +/* called from idetape_chrdev_read() to service a chrdev read request. */ static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) { idetape_tape_t *tape = drive->driver_data; - unsigned long flags; - struct request *rq_ptr; - int bytes_read; debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks); /* If we are at a filemark, return a read length of 0 */ - if (test_bit(IDETAPE_FILEMARK, &tape->flags)) + if (test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags)) return 0; - /* Wait for the next block to reach the head of the pipeline. */ - idetape_init_read(drive, tape->max_stages); - if (tape->first_stage == NULL) { - if (test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags)) - return 0; - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, - tape->merge_stage->bh); - } - idetape_wait_first_stage(drive); - rq_ptr = &tape->first_stage->rq; - bytes_read = tape->blk_size * (rq_ptr->nr_sectors - - rq_ptr->current_nr_sectors); - rq_ptr->nr_sectors = 0; - rq_ptr->current_nr_sectors = 0; + idetape_init_read(drive); - if (rq_ptr->errors == IDETAPE_ERROR_EOD) - return 0; - else { - idetape_switch_buffers(tape, tape->first_stage); - if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK) - set_bit(IDETAPE_FILEMARK, &tape->flags); - spin_lock_irqsave(&tape->lock, flags); - idetape_remove_stage_head(drive); - spin_unlock_irqrestore(&tape->lock, flags); - tape->pipeline_head++; - idetape_calculate_speeds(drive); - } - if (bytes_read > blocks * tape->blk_size) { - printk(KERN_ERR "ide-tape: bug: trying to return more bytes" - " than requested\n"); - bytes_read = blocks * tape->blk_size; - } - return (bytes_read); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, + tape->merge_stage->bh); } static void idetape_pad_zeros(ide_drive_t *drive, int bcount) @@ -2590,27 +1906,6 @@ static void idetape_pad_zeros(ide_drive_t *drive, int bcount) } } -static int idetape_pipeline_size(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - idetape_stage_t *stage; - struct request *rq; - int size = 0; - - idetape_wait_for_pipeline(drive); - stage = tape->first_stage; - while (stage != NULL) { - rq = &stage->rq; - size += tape->blk_size * (rq->nr_sectors - - rq->current_nr_sectors); - if (rq->errors == IDETAPE_ERROR_FILEMARK) - size += tape->blk_size; - stage = stage->next; - } - size += tape->merge_stage_size; - return size; -} - /* * Rewinds the tape to the Beginning Of the current Partition (BOP). We * currently support only one partition. @@ -2618,7 +1913,7 @@ static int idetape_pipeline_size(ide_drive_t *drive) static int idetape_rewind_tape(ide_drive_t *drive) { int retval; - idetape_pc_t pc; + struct ide_atapi_pc pc; idetape_tape_t *tape; tape = drive->driver_data; @@ -2656,11 +1951,10 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, if (copy_from_user(&config, argp, sizeof(config))) return -EFAULT; tape->best_dsc_rw_freq = config.dsc_rw_frequency; - tape->max_stages = config.nr_stages; break; case 0x0350: config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq; - config.nr_stages = tape->max_stages; + config.nr_stages = 1; if (copy_to_user(argp, &config, sizeof(config))) return -EFAULT; break; @@ -2670,19 +1964,11 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, return 0; } -/* - * The function below is now a bit more complicated than just passing the - * command to the tape since we may have crossed some filemarks during our - * pipelined read-ahead mode. As a minor side effect, the pipeline enables us to - * support MTFSFM when the filemark is in our internal pipeline even if the tape - * doesn't support spacing over filemarks in the reverse direction. - */ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, int mt_count) { idetape_tape_t *tape = drive->driver_data; - idetape_pc_t pc; - unsigned long flags; + struct ide_atapi_pc pc; int retval, count = 0; int sprev = !!(tape->caps[4] & 0x20); @@ -2695,40 +1981,9 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, } if (tape->chrdev_dir == IDETAPE_DIR_READ) { - /* its a read-ahead buffer, scan it for crossed filemarks. */ tape->merge_stage_size = 0; - if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags)) + if (test_and_clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags)) ++count; - while (tape->first_stage != NULL) { - if (count == mt_count) { - if (mt_op == MTFSFM) - set_bit(IDETAPE_FILEMARK, &tape->flags); - return 0; - } - spin_lock_irqsave(&tape->lock, flags); - if (tape->first_stage == tape->active_stage) { - /* - * We have reached the active stage in the read - * pipeline. There is no point in allowing the - * drive to continue reading any farther, so we - * stop the pipeline. - * - * This section should be moved to a separate - * subroutine because similar operations are - * done in __idetape_discard_read_pipeline(), - * for example. - */ - tape->next_stage = NULL; - spin_unlock_irqrestore(&tape->lock, flags); - idetape_wait_first_stage(drive); - tape->next_stage = tape->first_stage->next; - } else - spin_unlock_irqrestore(&tape->lock, flags); - if (tape->first_stage->rq.errors == - IDETAPE_ERROR_FILEMARK) - ++count; - idetape_remove_stage_head(drive); - } idetape_discard_read_pipeline(drive, 0); } @@ -2786,12 +2041,12 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); if (tape->chrdev_dir != IDETAPE_DIR_READ) { - if (test_bit(IDETAPE_DETECT_BS, &tape->flags)) + if (test_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags)) if (count > tape->blk_size && (count % tape->blk_size) == 0) tape->user_bs_factor = count / tape->blk_size; } - rc = idetape_init_read(drive, tape->max_stages); + rc = idetape_init_read(drive); if (rc < 0) return rc; if (count == 0) @@ -2799,8 +2054,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, if (tape->merge_stage_size) { actually_read = min((unsigned int)(tape->merge_stage_size), (unsigned int)count); - if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, - actually_read)) + if (idetape_copy_stage_to_user(tape, buf, actually_read)) ret = -EFAULT; buf += actually_read; tape->merge_stage_size -= actually_read; @@ -2810,8 +2064,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, bytes_read = idetape_add_chrdev_read_request(drive, ctl); if (bytes_read <= 0) goto finish; - if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, - bytes_read)) + if (idetape_copy_stage_to_user(tape, buf, bytes_read)) ret = -EFAULT; buf += bytes_read; count -= bytes_read; @@ -2822,14 +2075,13 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, if (bytes_read <= 0) goto finish; temp = min((unsigned long)count, (unsigned long)bytes_read); - if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, - temp)) + if (idetape_copy_stage_to_user(tape, buf, temp)) ret = -EFAULT; actually_read += temp; tape->merge_stage_size = bytes_read-temp; } finish: - if (!actually_read && test_bit(IDETAPE_FILEMARK, &tape->flags)) { + if (!actually_read && test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags)) { debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name); idetape_space_over_filemarks(drive, MTFSF, 1); @@ -2889,8 +2141,6 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } if (count == 0) return (0); - if (tape->restart_speed_control_req) - idetape_restart_speed_control(drive); if (tape->merge_stage_size) { if (tape->merge_stage_size >= tape->stage_size) { printk(KERN_ERR "ide-tape: bug: merge buf too big\n"); @@ -2899,8 +2149,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, actually_written = min((unsigned int) (tape->stage_size - tape->merge_stage_size), (unsigned int)count); - if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, - actually_written)) + if (idetape_copy_stage_from_user(tape, buf, actually_written)) ret = -EFAULT; buf += actually_written; tape->merge_stage_size += actually_written; @@ -2916,8 +2165,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } while (count >= tape->stage_size) { ssize_t retval; - if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, - tape->stage_size)) + if (idetape_copy_stage_from_user(tape, buf, tape->stage_size)) ret = -EFAULT; buf += tape->stage_size; count -= tape->stage_size; @@ -2928,8 +2176,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, } if (count) { actually_written += count; - if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, - count)) + if (idetape_copy_stage_from_user(tape, buf, count)) ret = -EFAULT; tape->merge_stage_size += count; } @@ -2938,7 +2185,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, static int idetape_write_filemark(ide_drive_t *drive) { - idetape_pc_t pc; + struct ide_atapi_pc pc; /* Write a filemark */ idetape_create_write_filemark_cmd(drive, &pc, 1); @@ -2955,8 +2202,7 @@ static int idetape_write_filemark(ide_drive_t *drive) * * Note: MTBSF and MTBSFM are not supported when the tape doesn't support * spacing over filemarks in the reverse direction. In this case, MTFSFM is also - * usually not supported (it is supported in the rare case in which we crossed - * the filemark during our read-ahead pipelined operation mode). + * usually not supported. * * The following commands are currently not supported: * @@ -2966,13 +2212,12 @@ static int idetape_write_filemark(ide_drive_t *drive) static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) { idetape_tape_t *tape = drive->driver_data; - idetape_pc_t pc; + struct ide_atapi_pc pc; int i, retval; debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n", mt_op, mt_count); - /* Commands which need our pipelined read-ahead stages. */ switch (mt_op) { case MTFSF: case MTFSFM: @@ -3022,7 +2267,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) !IDETAPE_LU_LOAD_MASK); retval = idetape_queue_pc_tail(drive, &pc); if (!retval) - clear_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags); + clear_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags); return retval; case MTNOP: idetape_discard_read_pipeline(drive, 0); @@ -3045,9 +2290,9 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) mt_count % tape->blk_size) return -EIO; tape->user_bs_factor = mt_count / tape->blk_size; - clear_bit(IDETAPE_DETECT_BS, &tape->flags); + clear_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags); } else - set_bit(IDETAPE_DETECT_BS, &tape->flags); + set_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags); return 0; case MTSEEK: idetape_discard_read_pipeline(drive, 0); @@ -3099,13 +2344,12 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd); - tape->restart_speed_control_req = 1; if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { idetape_empty_write_pipeline(drive); idetape_flush_tape_buffers(drive); } if (cmd == MTIOCGET || cmd == MTIOCPOS) { - block_offset = idetape_pipeline_size(drive) / + block_offset = tape->merge_stage_size / (tape->blk_size * tape->user_bs_factor); position = idetape_read_position(drive); if (position < 0) @@ -3149,7 +2393,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - idetape_pc_t pc; + struct ide_atapi_pc pc; idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR); if (idetape_queue_pc_tail(drive, &pc)) { @@ -3161,10 +2405,10 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive) } return; } - tape->blk_size = (pc.buffer[4 + 5] << 16) + - (pc.buffer[4 + 6] << 8) + - pc.buffer[4 + 7]; - tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7; + tape->blk_size = (pc.buf[4 + 5] << 16) + + (pc.buf[4 + 6] << 8) + + pc.buf[4 + 7]; + tape->drv_write_prot = (pc.buf[2] & 0x80) >> 7; } static int idetape_chrdev_open(struct inode *inode, struct file *filp) @@ -3172,7 +2416,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp) unsigned int minor = iminor(inode), i = minor & ~0xc0; ide_drive_t *drive; idetape_tape_t *tape; - idetape_pc_t pc; + struct ide_atapi_pc pc; int retval; if (i >= MAX_HWIFS * MAX_DRIVES) @@ -3195,25 +2439,22 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp) filp->private_data = tape; - if (test_and_set_bit(IDETAPE_BUSY, &tape->flags)) { + if (test_and_set_bit(IDETAPE_FLAG_BUSY, &tape->flags)) { retval = -EBUSY; goto out_put_tape; } retval = idetape_wait_ready(drive, 60 * HZ); if (retval) { - clear_bit(IDETAPE_BUSY, &tape->flags); + clear_bit(IDETAPE_FLAG_BUSY, &tape->flags); printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name); goto out_put_tape; } idetape_read_position(drive); - if (!test_bit(IDETAPE_ADDRESS_VALID, &tape->flags)) + if (!test_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags)) (void)idetape_rewind_tape(drive); - if (tape->chrdev_dir != IDETAPE_DIR_READ) - clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); - /* Read block size and write protect status from drive. */ ide_tape_get_bsize_from_bdesc(drive); @@ -3227,7 +2468,7 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp) if (tape->write_prot) { if ((filp->f_flags & O_ACCMODE) == O_WRONLY || (filp->f_flags & O_ACCMODE) == O_RDWR) { - clear_bit(IDETAPE_BUSY, &tape->flags); + clear_bit(IDETAPE_FLAG_BUSY, &tape->flags); retval = -EROFS; goto out_put_tape; } @@ -3242,8 +2483,6 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp) } } } - idetape_restart_speed_control(drive); - tape->restart_speed_control_req = 0; return 0; out_put_tape: @@ -3272,7 +2511,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp) { struct ide_tape_obj *tape = ide_tape_f(filp); ide_drive_t *drive = tape->drive; - idetape_pc_t pc; + struct ide_atapi_pc pc; unsigned int minor = iminor(inode); lock_kernel(); @@ -3285,14 +2524,9 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp) if (tape->chrdev_dir == IDETAPE_DIR_READ) { if (minor < 128) idetape_discard_read_pipeline(drive, 1); - else - idetape_wait_for_pipeline(drive); } - if (tape->cache_stage != NULL) { - __idetape_kfree_stage(tape->cache_stage); - tape->cache_stage = NULL; - } - if (minor < 128 && test_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags)) + + if (minor < 128 && test_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags)) (void) idetape_rewind_tape(drive); if (tape->chrdev_dir == IDETAPE_DIR_NONE) { if (tape->door_locked == DOOR_LOCKED) { @@ -3302,7 +2536,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp) } } } - clear_bit(IDETAPE_BUSY, &tape->flags); + clear_bit(IDETAPE_FLAG_BUSY, &tape->flags); ide_tape_put(tape); unlock_kernel(); return 0; @@ -3350,7 +2584,7 @@ static int idetape_identify_device(ide_drive_t *drive) static void idetape_get_inquiry_results(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - idetape_pc_t pc; + struct ide_atapi_pc pc; char fw_rev[6], vendor_id[10], product_id[18]; idetape_create_inquiry_cmd(&pc); @@ -3359,9 +2593,9 @@ static void idetape_get_inquiry_results(ide_drive_t *drive) tape->name); return; } - memcpy(vendor_id, &pc.buffer[8], 8); - memcpy(product_id, &pc.buffer[16], 16); - memcpy(fw_rev, &pc.buffer[32], 4); + memcpy(vendor_id, &pc.buf[8], 8); + memcpy(product_id, &pc.buf[16], 16); + memcpy(fw_rev, &pc.buf[32], 4); ide_fixstring(vendor_id, 10, 0); ide_fixstring(product_id, 18, 0); @@ -3378,7 +2612,7 @@ static void idetape_get_inquiry_results(ide_drive_t *drive) static void idetape_get_mode_sense_results(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - idetape_pc_t pc; + struct ide_atapi_pc pc; u8 *caps; u8 speed, max_speed; @@ -3392,7 +2626,7 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive) put_unaligned(6*52, (u16 *)&tape->caps[16]); return; } - caps = pc.buffer + 4 + pc.buffer[3]; + caps = pc.buf + 4 + pc.buf[3]; /* convert to host order and save for later use */ speed = be16_to_cpu(*(u16 *)&caps[14]); @@ -3428,18 +2662,6 @@ static void idetape_add_settings(ide_drive_t *drive) ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 2, (u16 *)&tape->caps[16], NULL); - ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff, - tape->stage_size / 1024, 1, &tape->min_pipeline, NULL); - ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff, - tape->stage_size / 1024, 1, &tape->max_stages, NULL); - ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1, 0xffff, - tape->stage_size / 1024, 1, &tape->max_pipeline, NULL); - ide_add_setting(drive, "pipeline_used", SETTING_READ, TYPE_INT, 0, - 0xffff, tape->stage_size / 1024, 1, &tape->nr_stages, - NULL); - ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0, - 0xffff, tape->stage_size / 1024, 1, - &tape->nr_pending_stages, NULL); ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 1, (u16 *)&tape->caps[14], NULL); ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff, 1, @@ -3449,12 +2671,6 @@ static void idetape_add_settings(ide_drive_t *drive) NULL); ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL); - ide_add_setting(drive, "pipeline_head_speed_c", SETTING_READ, TYPE_INT, - 0, 0xffff, 1, 1, &tape->controlled_pipeline_head_speed, - NULL); - ide_add_setting(drive, "pipeline_head_speed_u", SETTING_READ, TYPE_INT, - 0, 0xffff, 1, 1, - &tape->uncontrolled_pipeline_head_speed, NULL); ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->avg_speed, NULL); ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1, @@ -3477,11 +2693,10 @@ static inline void idetape_add_settings(ide_drive_t *drive) { ; } */ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) { - unsigned long t1, tmid, tn, t; + unsigned long t; int speed; int stage_size; u8 gcw[2]; - struct sysinfo si; u16 *ctl = (u16 *)&tape->caps[12]; spin_lock_init(&tape->lock); @@ -3500,17 +2715,11 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->name[2] = '0' + minor; tape->chrdev_dir = IDETAPE_DIR_NONE; tape->pc = tape->pc_stack; - tape->max_insert_speed = 10000; - tape->speed_control = 1; *((unsigned short *) &gcw) = drive->id->config; /* Command packet DRQ type */ if (((gcw[0] & 0x60) >> 5) == 1) - set_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags); - - tape->min_pipeline = 10; - tape->max_pipeline = 10; - tape->max_stages = 10; + set_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags); idetape_get_inquiry_results(drive); idetape_get_mode_sense_results(drive); @@ -3529,36 +2738,10 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->excess_bh_size = PAGE_SIZE - stage_size % PAGE_SIZE; } - /* Select the "best" DSC read/write polling freq and pipeline size. */ + /* select the "best" DSC read/write polling freq */ speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]); - tape->max_stages = speed * 1000 * 10 / tape->stage_size; - - /* Limit memory use for pipeline to 10% of physical memory */ - si_meminfo(&si); - if (tape->max_stages * tape->stage_size > - si.totalram * si.mem_unit / 10) - tape->max_stages = - si.totalram * si.mem_unit / (10 * tape->stage_size); - - tape->max_stages = min(tape->max_stages, IDETAPE_MAX_PIPELINE_STAGES); - tape->min_pipeline = min(tape->max_stages, IDETAPE_MIN_PIPELINE_STAGES); - tape->max_pipeline = - min(tape->max_stages * 2, IDETAPE_MAX_PIPELINE_STAGES); - if (tape->max_stages == 0) { - tape->max_stages = 1; - tape->min_pipeline = 1; - tape->max_pipeline = 1; - } - - t1 = (tape->stage_size * HZ) / (speed * 1000); - tmid = (*(u16 *)&tape->caps[16] * 32 * HZ) / (speed * 125); - tn = (IDETAPE_FIFO_THRESHOLD * tape->stage_size * HZ) / (speed * 1000); - - if (tape->max_stages) - t = tn; - else - t = t1; + t = (IDETAPE_FIFO_THRESHOLD * tape->stage_size * HZ) / (speed * 1000); /* * Ensure that the number we got makes sense; limit it within @@ -3568,11 +2751,10 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), IDETAPE_DSC_RW_MIN); printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, " - "%dkB pipeline, %lums tDSC%s\n", + "%lums tDSC%s\n", drive->name, tape->name, *(u16 *)&tape->caps[14], (*(u16 *)&tape->caps[16] * 512) / tape->stage_size, tape->stage_size / 1024, - tape->max_stages * tape->stage_size / 1024, tape->best_dsc_rw_freq * 1000 / HZ, drive->using_dma ? ", DMA":""); @@ -3596,7 +2778,7 @@ static void ide_tape_release(struct kref *kref) ide_drive_t *drive = tape->drive; struct gendisk *g = tape->disk; - BUG_ON(tape->first_stage != NULL || tape->merge_stage_size); + BUG_ON(tape->merge_stage_size); drive->dsc_overlap = 0; drive->driver_data = NULL; diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 4c86a8d84b4c..a317ca9c46e5 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -59,32 +59,34 @@ void ide_tf_load(ide_drive_t *drive, ide_task_t *task) SELECT_MASK(drive, 0); if (task->tf_flags & IDE_TFLAG_OUT_DATA) - hwif->OUTW((tf->hob_data << 8) | tf->data, IDE_DATA_REG); + hwif->OUTW((tf->hob_data << 8) | tf->data, + hwif->io_ports[IDE_DATA_OFFSET]); if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) - hwif->OUTB(tf->hob_feature, IDE_FEATURE_REG); + hwif->OUTB(tf->hob_feature, hwif->io_ports[IDE_FEATURE_OFFSET]); if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) - hwif->OUTB(tf->hob_nsect, IDE_NSECTOR_REG); + hwif->OUTB(tf->hob_nsect, hwif->io_ports[IDE_NSECTOR_OFFSET]); if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) - hwif->OUTB(tf->hob_lbal, IDE_SECTOR_REG); + hwif->OUTB(tf->hob_lbal, hwif->io_ports[IDE_SECTOR_OFFSET]); if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) - hwif->OUTB(tf->hob_lbam, IDE_LCYL_REG); + hwif->OUTB(tf->hob_lbam, hwif->io_ports[IDE_LCYL_OFFSET]); if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) - hwif->OUTB(tf->hob_lbah, IDE_HCYL_REG); + hwif->OUTB(tf->hob_lbah, hwif->io_ports[IDE_HCYL_OFFSET]); if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) - hwif->OUTB(tf->feature, IDE_FEATURE_REG); + hwif->OUTB(tf->feature, hwif->io_ports[IDE_FEATURE_OFFSET]); if (task->tf_flags & IDE_TFLAG_OUT_NSECT) - hwif->OUTB(tf->nsect, IDE_NSECTOR_REG); + hwif->OUTB(tf->nsect, hwif->io_ports[IDE_NSECTOR_OFFSET]); if (task->tf_flags & IDE_TFLAG_OUT_LBAL) - hwif->OUTB(tf->lbal, IDE_SECTOR_REG); + hwif->OUTB(tf->lbal, hwif->io_ports[IDE_SECTOR_OFFSET]); if (task->tf_flags & IDE_TFLAG_OUT_LBAM) - hwif->OUTB(tf->lbam, IDE_LCYL_REG); + hwif->OUTB(tf->lbam, hwif->io_ports[IDE_LCYL_OFFSET]); if (task->tf_flags & IDE_TFLAG_OUT_LBAH) - hwif->OUTB(tf->lbah, IDE_HCYL_REG); + hwif->OUTB(tf->lbah, hwif->io_ports[IDE_HCYL_OFFSET]); if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) - hwif->OUTB((tf->device & HIHI) | drive->select.all, IDE_SELECT_REG); + hwif->OUTB((tf->device & HIHI) | drive->select.all, + hwif->io_ports[IDE_SELECT_OFFSET]); } int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) @@ -133,6 +135,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) ide_hwif_t *hwif = HWIF(drive); struct ide_taskfile *tf = &task->tf; ide_handler_t *handler = NULL; + const struct ide_dma_ops *dma_ops = hwif->dma_ops; if (task->data_phase == TASKFILE_MULTI_IN || task->data_phase == TASKFILE_MULTI_OUT) { @@ -152,7 +155,8 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) switch (task->data_phase) { case TASKFILE_MULTI_OUT: case TASKFILE_OUT: - hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG); + hwif->OUTBSYNC(drive, tf->command, + hwif->io_ports[IDE_COMMAND_OFFSET]); ndelay(400); /* FIXME */ return pre_task_out_intr(drive, task->rq); case TASKFILE_MULTI_IN: @@ -175,10 +179,10 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) return ide_started; default: if (task_dma_ok(task) == 0 || drive->using_dma == 0 || - hwif->dma_setup(drive)) + dma_ops->dma_setup(drive)) return ide_stopped; - hwif->dma_exec_cmd(drive, tf->command); - hwif->dma_start(drive); + dma_ops->dma_exec_cmd(drive, tf->command); + dma_ops->dma_start(drive); return ide_started; } } @@ -452,7 +456,7 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive) /* Error? */ if (stat & ERR_STAT) - return task_error(drive, rq, __FUNCTION__, stat); + return task_error(drive, rq, __func__, stat); /* Didn't want any data? Odd. */ if (!(stat & DRQ_STAT)) @@ -464,7 +468,7 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive) if (!hwif->nleft) { stat = wait_drive_not_busy(drive); if (!OK_STAT(stat, 0, BAD_STAT)) - return task_error(drive, rq, __FUNCTION__, stat); + return task_error(drive, rq, __func__, stat); task_end_request(drive, rq, stat); return ide_stopped; } @@ -485,11 +489,11 @@ static ide_startstop_t task_out_intr (ide_drive_t *drive) u8 stat = ide_read_status(drive); if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat)) - return task_error(drive, rq, __FUNCTION__, stat); + return task_error(drive, rq, __func__, stat); /* Deal with unexpected ATA data phase. */ if (((stat & DRQ_STAT) == 0) ^ !hwif->nleft) - return task_error(drive, rq, __FUNCTION__, stat); + return task_error(drive, rq, __func__, stat); if (!hwif->nleft) { task_end_request(drive, rq, stat); @@ -672,7 +676,7 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) /* (hs): give up if multcount is not set */ printk(KERN_ERR "%s: %s Multimode Write " \ "multcount is not set\n", - drive->name, __FUNCTION__); + drive->name, __func__); err = -EPERM; goto abort; } @@ -689,7 +693,7 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) /* (hs): give up if multcount is not set */ printk(KERN_ERR "%s: %s Multimode Read failure " \ "multcount is not set\n", - drive->name, __FUNCTION__); + drive->name, __func__); err = -EPERM; goto abort; } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 5f545153391a..ee6bd78ac9f4 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -78,40 +78,26 @@ /* default maximum number of failures */ #define IDE_DEFAULT_MAX_FAILURES 1 +struct class *ide_port_class; + static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR, IDE2_MAJOR, IDE3_MAJOR, IDE4_MAJOR, IDE5_MAJOR, IDE6_MAJOR, IDE7_MAJOR, IDE8_MAJOR, IDE9_MAJOR }; -static int idebus_parameter; /* holds the "idebus=" parameter */ -static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */ - DEFINE_MUTEX(ide_cfg_mtx); - __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); - -int noautodma = 0; -#ifdef CONFIG_BLK_DEV_IDEACPI -int ide_noacpi = 0; -int ide_noacpitfs = 1; -int ide_noacpionboot = 1; -#endif - -/* - * This is declared extern in ide.h, for access by other IDE modules: - */ -ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ +__cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); +EXPORT_SYMBOL(ide_lock); -EXPORT_SYMBOL(ide_hwifs); +static void ide_port_init_devices_data(ide_hwif_t *); /* * Do not even *think* about calling this! */ void ide_init_port_data(ide_hwif_t *hwif, unsigned int index) { - unsigned int unit; - /* bulk initialize hwif & drive info with zeros */ memset(hwif, 0, sizeof(ide_hwif_t)); @@ -130,8 +116,19 @@ void ide_init_port_data(ide_hwif_t *hwif, unsigned int index) default_hwif_iops(hwif); default_hwif_transport(hwif); + + ide_port_init_devices_data(hwif); +} + +static void ide_port_init_devices_data(ide_hwif_t *hwif) +{ + int unit; + for (unit = 0; unit < MAX_DRIVES; ++unit) { ide_drive_t *drive = &hwif->drives[unit]; + u8 j = (hwif->index * MAX_DRIVES) + unit; + + memset(drive, 0, sizeof(*drive)); drive->media = ide_disk; drive->select.all = (unit<<4)|0xa0; @@ -143,317 +140,13 @@ void ide_init_port_data(ide_hwif_t *hwif, unsigned int index) drive->special.b.set_geometry = 1; drive->name[0] = 'h'; drive->name[1] = 'd'; - drive->name[2] = 'a' + (index * MAX_DRIVES) + unit; + drive->name[2] = 'a' + j; drive->max_failures = IDE_DEFAULT_MAX_FAILURES; - drive->using_dma = 0; - drive->vdma = 0; + INIT_LIST_HEAD(&drive->list); init_completion(&drive->gendev_rel_comp); } } -EXPORT_SYMBOL_GPL(ide_init_port_data); - -static void init_hwif_default(ide_hwif_t *hwif, unsigned int index) -{ - hw_regs_t hw; - - memset(&hw, 0, sizeof(hw_regs_t)); - - ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, &hwif->irq); - - memcpy(hwif->io_ports, hw.io_ports, sizeof(hw.io_ports)); - - hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET]; -#ifdef CONFIG_BLK_DEV_HD - if (hwif->io_ports[IDE_DATA_OFFSET] == HD_DATA) - hwif->noprobe = 1; /* may be overridden by ide_setup() */ -#endif -} - -/* - * init_ide_data() sets reasonable default values into all fields - * of all instances of the hwifs and drives, but only on the first call. - * Subsequent calls have no effect (they don't wipe out anything). - * - * This routine is normally called at driver initialization time, - * but may also be called MUCH earlier during kernel "command-line" - * parameter processing. As such, we cannot depend on any other parts - * of the kernel (such as memory allocation) to be functioning yet. - * - * This is too bad, as otherwise we could dynamically allocate the - * ide_drive_t structs as needed, rather than always consuming memory - * for the max possible number (MAX_HWIFS * MAX_DRIVES) of them. - * - * FIXME: We should stuff the setup data into __init and copy the - * relevant hwifs/allocate them properly during boot. - */ -#define MAGIC_COOKIE 0x12345678 -static void __init init_ide_data (void) -{ - ide_hwif_t *hwif; - unsigned int index; - static unsigned long magic_cookie = MAGIC_COOKIE; - - if (magic_cookie != MAGIC_COOKIE) - return; /* already initialized */ - magic_cookie = 0; - - /* Initialise all interface structures */ - for (index = 0; index < MAX_HWIFS; ++index) { - hwif = &ide_hwifs[index]; - ide_init_port_data(hwif, index); - init_hwif_default(hwif, index); -#if !defined(CONFIG_PPC32) || !defined(CONFIG_PCI) - hwif->irq = - ide_init_default_irq(hwif->io_ports[IDE_DATA_OFFSET]); -#endif - } -} - -/** - * ide_system_bus_speed - guess bus speed - * - * ide_system_bus_speed() returns what we think is the system VESA/PCI - * bus speed (in MHz). This is used for calculating interface PIO timings. - * The default is 40 for known PCI systems, 50 otherwise. - * The "idebus=xx" parameter can be used to override this value. - * The actual value to be used is computed/displayed the first time - * through. Drivers should only use this as a last resort. - * - * Returns a guessed speed in MHz. - */ - -static int ide_system_bus_speed(void) -{ -#ifdef CONFIG_PCI - static struct pci_device_id pci_default[] = { - { PCI_DEVICE(PCI_ANY_ID, PCI_ANY_ID) }, - { } - }; -#else -#define pci_default 0 -#endif /* CONFIG_PCI */ - - /* user supplied value */ - if (idebus_parameter) - return idebus_parameter; - - /* safe default value for PCI or VESA and PCI*/ - return pci_dev_present(pci_default) ? 33 : 50; -} - -ide_hwif_t * ide_find_port(unsigned long base) -{ - ide_hwif_t *hwif; - int i; - - for (i = 0; i < MAX_HWIFS; i++) { - hwif = &ide_hwifs[i]; - if (hwif->io_ports[IDE_DATA_OFFSET] == base) - goto found; - } - - for (i = 0; i < MAX_HWIFS; i++) { - hwif = &ide_hwifs[i]; - if (hwif->io_ports[IDE_DATA_OFFSET] == 0) - goto found; - } - - hwif = NULL; -found: - return hwif; -} - -EXPORT_SYMBOL_GPL(ide_find_port); - -static struct resource* hwif_request_region(ide_hwif_t *hwif, - unsigned long addr, int num) -{ - struct resource *res = request_region(addr, num, hwif->name); - - if (!res) - printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", - hwif->name, addr, addr+num-1); - return res; -} - -/** - * ide_hwif_request_regions - request resources for IDE - * @hwif: interface to use - * - * Requests all the needed resources for an interface. - * Right now core IDE code does this work which is deeply wrong. - * MMIO leaves it to the controller driver, - * PIO will migrate this way over time. - */ - -int ide_hwif_request_regions(ide_hwif_t *hwif) -{ - unsigned long addr; - unsigned int i; - - if (hwif->mmio) - return 0; - addr = hwif->io_ports[IDE_CONTROL_OFFSET]; - if (addr && !hwif_request_region(hwif, addr, 1)) - goto control_region_busy; - hwif->straight8 = 0; - addr = hwif->io_ports[IDE_DATA_OFFSET]; - if ((addr | 7) == hwif->io_ports[IDE_STATUS_OFFSET]) { - if (!hwif_request_region(hwif, addr, 8)) - goto data_region_busy; - hwif->straight8 = 1; - return 0; - } - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { - addr = hwif->io_ports[i]; - if (!hwif_request_region(hwif, addr, 1)) { - while (--i) - release_region(addr, 1); - goto data_region_busy; - } - } - return 0; - -data_region_busy: - addr = hwif->io_ports[IDE_CONTROL_OFFSET]; - if (addr) - release_region(addr, 1); -control_region_busy: - /* If any errors are return, we drop the hwif interface. */ - return -EBUSY; -} - -/** - * ide_hwif_release_regions - free IDE resources - * - * Note that we only release the standard ports, - * and do not even try to handle any extra ports - * allocated for weird IDE interface chipsets. - * - * Note also that we don't yet handle mmio resources here. More - * importantly our caller should be doing this so we need to - * restructure this as a helper function for drivers. - */ - -void ide_hwif_release_regions(ide_hwif_t *hwif) -{ - u32 i = 0; - - if (hwif->mmio) - return; - if (hwif->io_ports[IDE_CONTROL_OFFSET]) - release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1); - if (hwif->straight8) { - release_region(hwif->io_ports[IDE_DATA_OFFSET], 8); - return; - } - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) - if (hwif->io_ports[i]) - release_region(hwif->io_ports[i], 1); -} - -/** - * ide_hwif_restore - restore hwif to template - * @hwif: hwif to update - * @tmp_hwif: template - * - * Restore hwif to a previous state by copying most settings - * from the template. - */ - -static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif) -{ - hwif->hwgroup = tmp_hwif->hwgroup; - - hwif->gendev.parent = tmp_hwif->gendev.parent; - - hwif->proc = tmp_hwif->proc; - - hwif->major = tmp_hwif->major; - hwif->straight8 = tmp_hwif->straight8; - hwif->bus_state = tmp_hwif->bus_state; - - hwif->host_flags = tmp_hwif->host_flags; - - hwif->pio_mask = tmp_hwif->pio_mask; - - hwif->ultra_mask = tmp_hwif->ultra_mask; - hwif->mwdma_mask = tmp_hwif->mwdma_mask; - hwif->swdma_mask = tmp_hwif->swdma_mask; - - hwif->cbl = tmp_hwif->cbl; - - hwif->chipset = tmp_hwif->chipset; - hwif->hold = tmp_hwif->hold; - - hwif->dev = tmp_hwif->dev; - -#ifdef CONFIG_BLK_DEV_IDEPCI - hwif->cds = tmp_hwif->cds; -#endif - - hwif->set_pio_mode = tmp_hwif->set_pio_mode; - hwif->set_dma_mode = tmp_hwif->set_dma_mode; - hwif->mdma_filter = tmp_hwif->mdma_filter; - hwif->udma_filter = tmp_hwif->udma_filter; - hwif->selectproc = tmp_hwif->selectproc; - hwif->reset_poll = tmp_hwif->reset_poll; - hwif->pre_reset = tmp_hwif->pre_reset; - hwif->resetproc = tmp_hwif->resetproc; - hwif->maskproc = tmp_hwif->maskproc; - hwif->quirkproc = tmp_hwif->quirkproc; - hwif->busproc = tmp_hwif->busproc; - - hwif->ata_input_data = tmp_hwif->ata_input_data; - hwif->ata_output_data = tmp_hwif->ata_output_data; - hwif->atapi_input_bytes = tmp_hwif->atapi_input_bytes; - hwif->atapi_output_bytes = tmp_hwif->atapi_output_bytes; - - hwif->dma_host_set = tmp_hwif->dma_host_set; - hwif->dma_setup = tmp_hwif->dma_setup; - hwif->dma_exec_cmd = tmp_hwif->dma_exec_cmd; - hwif->dma_start = tmp_hwif->dma_start; - hwif->ide_dma_end = tmp_hwif->ide_dma_end; - hwif->ide_dma_test_irq = tmp_hwif->ide_dma_test_irq; - hwif->ide_dma_clear_irq = tmp_hwif->ide_dma_clear_irq; - hwif->dma_lost_irq = tmp_hwif->dma_lost_irq; - hwif->dma_timeout = tmp_hwif->dma_timeout; - - hwif->OUTB = tmp_hwif->OUTB; - hwif->OUTBSYNC = tmp_hwif->OUTBSYNC; - hwif->OUTW = tmp_hwif->OUTW; - hwif->OUTSW = tmp_hwif->OUTSW; - hwif->OUTSL = tmp_hwif->OUTSL; - - hwif->INB = tmp_hwif->INB; - hwif->INW = tmp_hwif->INW; - hwif->INSW = tmp_hwif->INSW; - hwif->INSL = tmp_hwif->INSL; - - hwif->sg_max_nents = tmp_hwif->sg_max_nents; - - hwif->mmio = tmp_hwif->mmio; - hwif->rqsize = tmp_hwif->rqsize; - -#ifndef CONFIG_BLK_DEV_IDECS - hwif->irq = tmp_hwif->irq; -#endif - - hwif->dma_base = tmp_hwif->dma_base; - hwif->dma_command = tmp_hwif->dma_command; - hwif->dma_vendor1 = tmp_hwif->dma_vendor1; - hwif->dma_status = tmp_hwif->dma_status; - hwif->dma_vendor3 = tmp_hwif->dma_vendor3; - hwif->dma_prdtable = tmp_hwif->dma_prdtable; - - hwif->config_data = tmp_hwif->config_data; - hwif->select_data = tmp_hwif->select_data; - hwif->extra_base = tmp_hwif->extra_base; - hwif->extra_ports = tmp_hwif->extra_ports; - - hwif->hwif_data = tmp_hwif->hwif_data; -} void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) { @@ -490,11 +183,38 @@ void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) spin_unlock_irq(&ide_lock); } +/* Called with ide_lock held. */ +static void __ide_port_unregister_devices(ide_hwif_t *hwif) +{ + int i; + + for (i = 0; i < MAX_DRIVES; i++) { + ide_drive_t *drive = &hwif->drives[i]; + + if (drive->present) { + spin_unlock_irq(&ide_lock); + device_unregister(&drive->gendev); + wait_for_completion(&drive->gendev_rel_comp); + spin_lock_irq(&ide_lock); + } + } +} + +void ide_port_unregister_devices(ide_hwif_t *hwif) +{ + mutex_lock(&ide_cfg_mtx); + spin_lock_irq(&ide_lock); + __ide_port_unregister_devices(hwif); + hwif->present = 0; + ide_port_init_devices_data(hwif); + spin_unlock_irq(&ide_lock); + mutex_unlock(&ide_cfg_mtx); +} +EXPORT_SYMBOL_GPL(ide_port_unregister_devices); + /** * ide_unregister - free an IDE interface - * @index: index of interface (will change soon to a pointer) - * @init_default: init default hwif flag - * @restore: restore hwif flag + * @index: IDE interface * * Perform the final unregister of an IDE interface. At the moment * we don't refcount interfaces so this will also get split up. @@ -514,32 +234,19 @@ void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) * This is raving bonkers. */ -void ide_unregister(unsigned int index, int init_default, int restore) +void ide_unregister(ide_hwif_t *hwif) { - ide_drive_t *drive; - ide_hwif_t *hwif, *g; - static ide_hwif_t tmp_hwif; /* protected by ide_cfg_mtx */ + ide_hwif_t *g; ide_hwgroup_t *hwgroup; - int irq_count = 0, unit; - - BUG_ON(index >= MAX_HWIFS); + int irq_count = 0; BUG_ON(in_interrupt()); BUG_ON(irqs_disabled()); mutex_lock(&ide_cfg_mtx); spin_lock_irq(&ide_lock); - hwif = &ide_hwifs[index]; if (!hwif->present) goto abort; - for (unit = 0; unit < MAX_DRIVES; ++unit) { - drive = &hwif->drives[unit]; - if (!drive->present) - continue; - spin_unlock_irq(&ide_lock); - device_unregister(&drive->gendev); - wait_for_completion(&drive->gendev_rel_comp); - spin_lock_irq(&ide_lock); - } + __ide_port_unregister_devices(hwif); hwif->present = 0; spin_unlock_irq(&ide_lock); @@ -561,6 +268,7 @@ void ide_unregister(unsigned int index, int init_default, int restore) ide_remove_port_from_hwgroup(hwif); + device_unregister(hwif->portdev); device_unregister(&hwif->gendev); wait_for_completion(&hwif->gendev_rel_comp); @@ -572,33 +280,11 @@ void ide_unregister(unsigned int index, int init_default, int restore) unregister_blkdev(hwif->major, hwif->name); spin_lock_irq(&ide_lock); - if (hwif->dma_base) { - (void) ide_release_dma(hwif); - - hwif->dma_base = 0; - hwif->dma_command = 0; - hwif->dma_vendor1 = 0; - hwif->dma_status = 0; - hwif->dma_vendor3 = 0; - hwif->dma_prdtable = 0; - - hwif->extra_base = 0; - hwif->extra_ports = 0; - } - - ide_hwif_release_regions(hwif); - - /* copy original settings */ - tmp_hwif = *hwif; + if (hwif->dma_base) + ide_release_dma_engine(hwif); /* restore hwif data to pristine status */ - ide_init_port_data(hwif, index); - - if (init_default) - init_hwif_default(hwif, index); - - if (restore) - ide_hwif_restore(hwif, &tmp_hwif); + ide_init_port_data(hwif, hwif->index); abort: spin_unlock_irq(&ide_lock); @@ -611,86 +297,12 @@ void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) { memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports)); hwif->irq = hw->irq; - hwif->noprobe = 0; hwif->chipset = hw->chipset; hwif->gendev.parent = hw->dev; hwif->ack_intr = hw->ack_intr; } EXPORT_SYMBOL_GPL(ide_init_port_hw); -ide_hwif_t *ide_deprecated_find_port(unsigned long base) -{ - ide_hwif_t *hwif; - int i; - - for (i = 0; i < MAX_HWIFS; i++) { - hwif = &ide_hwifs[i]; - if (hwif->io_ports[IDE_DATA_OFFSET] == base) - goto found; - } - - for (i = 0; i < MAX_HWIFS; i++) { - hwif = &ide_hwifs[i]; - if (hwif->hold) - continue; - if (!hwif->present && hwif->mate == NULL) - goto found; - } - - hwif = NULL; -found: - return hwif; -} -EXPORT_SYMBOL_GPL(ide_deprecated_find_port); - -/** - * ide_register_hw - register IDE interface - * @hw: hardware registers - * @quirkproc: quirkproc function - * @hwifp: pointer to returned hwif - * - * Register an IDE interface, specifying exactly the registers etc. - * - * Returns -1 on error. - */ - -int ide_register_hw(hw_regs_t *hw, void (*quirkproc)(ide_drive_t *), - ide_hwif_t **hwifp) -{ - int index, retry = 1; - ide_hwif_t *hwif; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - - do { - hwif = ide_deprecated_find_port(hw->io_ports[IDE_DATA_OFFSET]); - if (hwif) - goto found; - for (index = 0; index < MAX_HWIFS; index++) - ide_unregister(index, 1, 1); - } while (retry--); - return -1; -found: - index = hwif->index; - if (hwif->present) - ide_unregister(index, 0, 1); - else if (!hwif->hold) - ide_init_port_data(hwif, index); - - ide_init_port_hw(hwif, hw); - hwif->quirkproc = quirkproc; - - idx[0] = index; - - ide_device_add(idx, NULL); - - if (hwifp) - *hwifp = hwif; - - return hwif->present ? index : -1; -} - -EXPORT_SYMBOL(ide_register_hw); - /* * Locks for IDE setting functionality */ @@ -775,7 +387,7 @@ int set_using_dma(ide_drive_t *drive, int arg) if (!drive->id || !(drive->id->capability & 1)) goto out; - if (hwif->dma_host_set == NULL) + if (hwif->dma_ops == NULL) goto out; err = -EBUSY; @@ -814,11 +426,14 @@ out: int set_pio_mode(ide_drive_t *drive, int arg) { struct request rq; + ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; if (arg < 0 || arg > 255) return -EINVAL; - if (drive->hwif->set_pio_mode == NULL) + if (port_ops == NULL || port_ops->set_pio_mode == NULL || + (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) return -ENOSYS; if (drive->special.b.set_tune) @@ -849,20 +464,6 @@ static int set_unmaskirq(ide_drive_t *drive, int arg) return 0; } -/** - * system_bus_clock - clock guess - * - * External version of the bus clock guess used by very old IDE drivers - * for things like VLB timings. Should not be used. - */ - -int system_bus_clock (void) -{ - return system_bus_speed; -} - -EXPORT_SYMBOL(system_bus_clock); - static int generic_ide_suspend(struct device *dev, pm_message_t mesg) { ide_drive_t *drive = dev->driver_data; @@ -993,27 +594,6 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device if (!capable(CAP_SYS_RAWIO)) return -EACCES; return ide_task_ioctl(drive, cmd, arg); - - case HDIO_SCAN_HWIF: - { - hw_regs_t hw; - int args[3]; - if (!capable(CAP_SYS_RAWIO)) return -EACCES; - if (copy_from_user(args, p, 3 * sizeof(int))) - return -EFAULT; - memset(&hw, 0, sizeof(hw)); - ide_init_hwif_ports(&hw, (unsigned long) args[0], - (unsigned long) args[1], NULL); - hw.irq = args[2]; - if (ide_register_hw(&hw, NULL, NULL) == -1) - return -EIO; - return 0; - } - case HDIO_UNREGISTER_HWIF: - if (!capable(CAP_SYS_RAWIO)) return -EACCES; - /* (arg > MAX_HWIFS) checked in function */ - ide_unregister(arg, 1, 1); - return 0; case HDIO_SET_NICE: if (!capable(CAP_SYS_ADMIN)) return -EACCES; if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1)))) @@ -1067,8 +647,6 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device case HDIO_SET_BUSSTATE: if (!capable(CAP_SYS_ADMIN)) return -EACCES; - if (HWIF(drive)->busproc) - return HWIF(drive)->busproc(drive, (int)arg); return -EOPNOTSUPP; default: return -EINVAL; @@ -1099,372 +677,6 @@ set_val: EXPORT_SYMBOL(generic_ide_ioctl); -/* - * stridx() returns the offset of c within s, - * or -1 if c is '\0' or not found within s. - */ -static int __init stridx (const char *s, char c) -{ - char *i = strchr(s, c); - return (i && c) ? i - s : -1; -} - -/* - * match_parm() does parsing for ide_setup(): - * - * 1. the first char of s must be '='. - * 2. if the remainder matches one of the supplied keywords, - * the index (1 based) of the keyword is negated and returned. - * 3. if the remainder is a series of no more than max_vals numbers - * separated by commas, the numbers are saved in vals[] and a - * count of how many were saved is returned. Base10 is assumed, - * and base16 is allowed when prefixed with "0x". - * 4. otherwise, zero is returned. - */ -static int __init match_parm (char *s, const char *keywords[], int vals[], int max_vals) -{ - static const char *decimal = "0123456789"; - static const char *hex = "0123456789abcdef"; - int i, n; - - if (*s++ == '=') { - /* - * Try matching against the supplied keywords, - * and return -(index+1) if we match one - */ - if (keywords != NULL) { - for (i = 0; *keywords != NULL; ++i) { - if (!strcmp(s, *keywords++)) - return -(i+1); - } - } - /* - * Look for a series of no more than "max_vals" - * numeric values separated by commas, in base10, - * or base16 when prefixed with "0x". - * Return a count of how many were found. - */ - for (n = 0; (i = stridx(decimal, *s)) >= 0;) { - vals[n] = i; - while ((i = stridx(decimal, *++s)) >= 0) - vals[n] = (vals[n] * 10) + i; - if (*s == 'x' && !vals[n]) { - while ((i = stridx(hex, *++s)) >= 0) - vals[n] = (vals[n] * 0x10) + i; - } - if (++n == max_vals) - break; - if (*s == ',' || *s == ';') - ++s; - } - if (!*s) - return n; - } - return 0; /* zero = nothing matched */ -} - -extern int probe_ali14xx; -extern int probe_umc8672; -extern int probe_dtc2278; -extern int probe_ht6560b; -extern int probe_qd65xx; -extern int cmd640_vlb; - -static int __initdata is_chipset_set[MAX_HWIFS]; - -/* - * ide_setup() gets called VERY EARLY during initialization, - * to handle kernel "command line" strings beginning with "hdx=" or "ide". - * - * Remember to update Documentation/ide/ide.txt if you change something here. - */ -static int __init ide_setup(char *s) -{ - int i, vals[3]; - ide_hwif_t *hwif; - ide_drive_t *drive; - unsigned int hw, unit; - const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1); - const char max_hwif = '0' + (MAX_HWIFS - 1); - - - if (strncmp(s,"hd",2) == 0 && s[2] == '=') /* hd= is for hd.c */ - return 0; /* driver and not us */ - - if (strncmp(s,"ide",3) && strncmp(s,"idebus",6) && strncmp(s,"hd",2)) - return 0; - - printk(KERN_INFO "ide_setup: %s", s); - init_ide_data (); - -#ifdef CONFIG_BLK_DEV_IDEDOUBLER - if (!strcmp(s, "ide=doubler")) { - extern int ide_doubler; - - printk(" : Enabled support for IDE doublers\n"); - ide_doubler = 1; - return 1; - } -#endif /* CONFIG_BLK_DEV_IDEDOUBLER */ - - if (!strcmp(s, "ide=nodma")) { - printk(" : Prevented DMA\n"); - noautodma = 1; - goto obsolete_option; - } - -#ifdef CONFIG_BLK_DEV_IDEACPI - if (!strcmp(s, "ide=noacpi")) { - //printk(" : Disable IDE ACPI support.\n"); - ide_noacpi = 1; - return 1; - } - if (!strcmp(s, "ide=acpigtf")) { - //printk(" : Enable IDE ACPI _GTF support.\n"); - ide_noacpitfs = 0; - return 1; - } - if (!strcmp(s, "ide=acpionboot")) { - //printk(" : Call IDE ACPI methods on boot.\n"); - ide_noacpionboot = 0; - return 1; - } -#endif /* CONFIG_BLK_DEV_IDEACPI */ - - /* - * Look for drive options: "hdx=" - */ - if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) { - const char *hd_words[] = { - "none", "noprobe", "nowerr", "cdrom", "nodma", - "autotune", "noautotune", "-8", "-9", "-10", - "noflush", "remap", "remap63", "scsi", NULL }; - unit = s[2] - 'a'; - hw = unit / MAX_DRIVES; - unit = unit % MAX_DRIVES; - hwif = &ide_hwifs[hw]; - drive = &hwif->drives[unit]; - if (strncmp(s + 4, "ide-", 4) == 0) { - strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req)); - goto obsolete_option; - } - switch (match_parm(&s[3], hd_words, vals, 3)) { - case -1: /* "none" */ - case -2: /* "noprobe" */ - drive->noprobe = 1; - goto done; - case -3: /* "nowerr" */ - drive->bad_wstat = BAD_R_STAT; - hwif->noprobe = 0; - goto done; - case -4: /* "cdrom" */ - drive->present = 1; - drive->media = ide_cdrom; - /* an ATAPI device ignores DRDY */ - drive->ready_stat = 0; - hwif->noprobe = 0; - goto done; - case -5: /* nodma */ - drive->nodma = 1; - goto done; - case -6: /* "autotune" */ - drive->autotune = IDE_TUNE_AUTO; - goto obsolete_option; - case -7: /* "noautotune" */ - drive->autotune = IDE_TUNE_NOAUTO; - goto obsolete_option; - case -11: /* noflush */ - drive->noflush = 1; - goto done; - case -12: /* "remap" */ - drive->remap_0_to_1 = 1; - goto obsolete_option; - case -13: /* "remap63" */ - drive->sect0 = 63; - goto obsolete_option; - case -14: /* "scsi" */ - drive->scsi = 1; - goto obsolete_option; - case 3: /* cyl,head,sect */ - drive->media = ide_disk; - drive->ready_stat = READY_STAT; - drive->cyl = drive->bios_cyl = vals[0]; - drive->head = drive->bios_head = vals[1]; - drive->sect = drive->bios_sect = vals[2]; - drive->present = 1; - drive->forced_geom = 1; - hwif->noprobe = 0; - goto done; - default: - goto bad_option; - } - } - - if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e') - goto bad_option; - /* - * Look for bus speed option: "idebus=" - */ - if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') { - if (match_parm(&s[6], NULL, vals, 1) != 1) - goto bad_option; - if (vals[0] >= 20 && vals[0] <= 66) { - idebus_parameter = vals[0]; - } else - printk(" -- BAD BUS SPEED! Expected value from 20 to 66"); - goto done; - } - /* - * Look for interface options: "idex=" - */ - if (s[3] >= '0' && s[3] <= max_hwif) { - /* - * Be VERY CAREFUL changing this: note hardcoded indexes below - * (-8, -9, -10) are reserved to ease the hardcoding. - */ - static const char *ide_words[] = { - "noprobe", "serialize", "minus3", "minus4", - "reset", "minus6", "ata66", "minus8", "minus9", - "minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb", - "dtc2278", "umc8672", "ali14xx", NULL }; - - hw_regs_t hwregs; - - hw = s[3] - '0'; - hwif = &ide_hwifs[hw]; - i = match_parm(&s[4], ide_words, vals, 3); - - /* - * Cryptic check to ensure chipset not already set for hwif. - * Note: we can't depend on hwif->chipset here. - */ - if ((i >= -18 && i <= -11) || (i > 0 && i <= 3)) { - /* chipset already specified */ - if (is_chipset_set[hw]) - goto bad_option; - if (i > -18 && i <= -11) { - /* these drivers are for "ide0=" only */ - if (hw != 0) - goto bad_hwif; - /* chipset already specified for 2nd port */ - if (is_chipset_set[hw+1]) - goto bad_option; - } - is_chipset_set[hw] = 1; - printk("\n"); - } - - switch (i) { -#ifdef CONFIG_BLK_DEV_ALI14XX - case -17: /* "ali14xx" */ - probe_ali14xx = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_UMC8672 - case -16: /* "umc8672" */ - probe_umc8672 = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_DTC2278 - case -15: /* "dtc2278" */ - probe_dtc2278 = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_CMD640 - case -14: /* "cmd640_vlb" */ - cmd640_vlb = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_HT6560B - case -13: /* "ht6560b" */ - probe_ht6560b = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_QD65XX - case -12: /* "qd65xx" */ - probe_qd65xx = 1; - goto obsolete_option; -#endif -#ifdef CONFIG_BLK_DEV_4DRIVES - case -11: /* "four" drives on one set of ports */ - { - ide_hwif_t *mate = &ide_hwifs[hw^1]; - mate->drives[0].select.all ^= 0x20; - mate->drives[1].select.all ^= 0x20; - hwif->chipset = mate->chipset = ide_4drives; - mate->irq = hwif->irq; - memcpy(mate->io_ports, hwif->io_ports, sizeof(hwif->io_ports)); - hwif->mate = mate; - mate->mate = hwif; - hwif->serialized = mate->serialized = 1; - goto obsolete_option; - } -#endif /* CONFIG_BLK_DEV_4DRIVES */ - case -10: /* minus10 */ - case -9: /* minus9 */ - case -8: /* minus8 */ - case -6: - case -4: - case -3: - goto bad_option; - case -7: /* ata66 */ -#ifdef CONFIG_BLK_DEV_IDEPCI - /* - * Use ATA_CBL_PATA40_SHORT so drive side - * cable detection is also overriden. - */ - hwif->cbl = ATA_CBL_PATA40_SHORT; - goto obsolete_option; -#else - goto bad_hwif; -#endif - case -5: /* "reset" */ - hwif->reset = 1; - goto obsolete_option; - case -2: /* "serialize" */ - hwif->mate = &ide_hwifs[hw^1]; - hwif->mate->mate = hwif; - hwif->serialized = hwif->mate->serialized = 1; - goto obsolete_option; - - case -1: /* "noprobe" */ - hwif->noprobe = 1; - goto obsolete_option; - - case 1: /* base */ - vals[1] = vals[0] + 0x206; /* default ctl */ - case 2: /* base,ctl */ - vals[2] = 0; /* default irq = probe for it */ - case 3: /* base,ctl,irq */ - memset(&hwregs, 0, sizeof(hwregs)); - ide_init_hwif_ports(&hwregs, vals[0], vals[1], &hwif->irq); - memcpy(hwif->io_ports, hwregs.io_ports, sizeof(hwif->io_ports)); - hwif->irq = vals[2]; - hwif->noprobe = 0; - hwif->chipset = ide_forced; - goto obsolete_option; - - case 0: goto bad_option; - default: - printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n"); - return 1; - } - } -bad_option: - printk(" -- BAD OPTION\n"); - return 1; -obsolete_option: - printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n"); - return 1; -bad_hwif: - printk("-- NOT SUPPORTED ON ide%d", hw); -done: - printk("\n"); - return 1; -} - -EXPORT_SYMBOL(ide_lock); - static int ide_bus_match(struct device *dev, struct device_driver *drv) { return 1; @@ -1589,6 +801,192 @@ struct bus_type ide_bus_type = { EXPORT_SYMBOL_GPL(ide_bus_type); +static void ide_port_class_release(struct device *portdev) +{ + ide_hwif_t *hwif = dev_get_drvdata(portdev); + + put_device(&hwif->gendev); +} + +int ide_vlb_clk; +EXPORT_SYMBOL_GPL(ide_vlb_clk); + +module_param_named(vlb_clock, ide_vlb_clk, int, 0); +MODULE_PARM_DESC(vlb_clock, "VLB clock frequency (in MHz)"); + +int ide_pci_clk; +EXPORT_SYMBOL_GPL(ide_pci_clk); + +module_param_named(pci_clock, ide_pci_clk, int, 0); +MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)"); + +static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp) +{ + int a, b, i, j = 1; + unsigned int *dev_param_mask = (unsigned int *)kp->arg; + + if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 && + sscanf(s, "%d.%d", &a, &b) != 2) + return -EINVAL; + + i = a * MAX_DRIVES + b; + + if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1) + return -EINVAL; + + if (j) + *dev_param_mask |= (1 << i); + else + *dev_param_mask &= (1 << i); + + return 0; +} + +static unsigned int ide_nodma; + +module_param_call(nodma, ide_set_dev_param_mask, NULL, &ide_nodma, 0); +MODULE_PARM_DESC(nodma, "disallow DMA for a device"); + +static unsigned int ide_noflush; + +module_param_call(noflush, ide_set_dev_param_mask, NULL, &ide_noflush, 0); +MODULE_PARM_DESC(noflush, "disable flush requests for a device"); + +static unsigned int ide_noprobe; + +module_param_call(noprobe, ide_set_dev_param_mask, NULL, &ide_noprobe, 0); +MODULE_PARM_DESC(noprobe, "skip probing for a device"); + +static unsigned int ide_nowerr; + +module_param_call(nowerr, ide_set_dev_param_mask, NULL, &ide_nowerr, 0); +MODULE_PARM_DESC(nowerr, "ignore the WRERR_STAT bit for a device"); + +static unsigned int ide_cdroms; + +module_param_call(cdrom, ide_set_dev_param_mask, NULL, &ide_cdroms, 0); +MODULE_PARM_DESC(cdrom, "force device as a CD-ROM"); + +struct chs_geom { + unsigned int cyl; + u8 head; + u8 sect; +}; + +static unsigned int ide_disks; +static struct chs_geom ide_disks_chs[MAX_HWIFS * MAX_DRIVES]; + +static int ide_set_disk_chs(const char *str, struct kernel_param *kp) +{ + int a, b, c = 0, h = 0, s = 0, i, j = 1; + + if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 && + sscanf(str, "%d.%d:%d", &a, &b, &j) != 3) + return -EINVAL; + + i = a * MAX_DRIVES + b; + + if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1) + return -EINVAL; + + if (c > INT_MAX || h > 255 || s > 255) + return -EINVAL; + + if (j) + ide_disks |= (1 << i); + else + ide_disks &= (1 << i); + + ide_disks_chs[i].cyl = c; + ide_disks_chs[i].head = h; + ide_disks_chs[i].sect = s; + + return 0; +} + +module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0); +MODULE_PARM_DESC(chs, "force device as a disk (using CHS)"); + +static void ide_dev_apply_params(ide_drive_t *drive) +{ + int i = drive->hwif->index * MAX_DRIVES + drive->select.b.unit; + + if (ide_nodma & (1 << i)) { + printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name); + drive->nodma = 1; + } + if (ide_noflush & (1 << i)) { + printk(KERN_INFO "ide: disabling flush requests for %s\n", + drive->name); + drive->noflush = 1; + } + if (ide_noprobe & (1 << i)) { + printk(KERN_INFO "ide: skipping probe for %s\n", drive->name); + drive->noprobe = 1; + } + if (ide_nowerr & (1 << i)) { + printk(KERN_INFO "ide: ignoring the WRERR_STAT bit for %s\n", + drive->name); + drive->bad_wstat = BAD_R_STAT; + } + if (ide_cdroms & (1 << i)) { + printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name); + drive->present = 1; + drive->media = ide_cdrom; + /* an ATAPI device ignores DRDY */ + drive->ready_stat = 0; + } + if (ide_disks & (1 << i)) { + drive->cyl = drive->bios_cyl = ide_disks_chs[i].cyl; + drive->head = drive->bios_head = ide_disks_chs[i].head; + drive->sect = drive->bios_sect = ide_disks_chs[i].sect; + drive->forced_geom = 1; + printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n", + drive->name, + drive->cyl, drive->head, drive->sect); + drive->present = 1; + drive->media = ide_disk; + drive->ready_stat = READY_STAT; + } +} + +static unsigned int ide_ignore_cable; + +static int ide_set_ignore_cable(const char *s, struct kernel_param *kp) +{ + int i, j = 1; + + if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1) + return -EINVAL; + + if (i >= MAX_HWIFS || j < 0 || j > 1) + return -EINVAL; + + if (j) + ide_ignore_cable |= (1 << i); + else + ide_ignore_cable &= (1 << i); + + return 0; +} + +module_param_call(ignore_cable, ide_set_ignore_cable, NULL, NULL, 0); +MODULE_PARM_DESC(ignore_cable, "ignore cable detection"); + +void ide_port_apply_params(ide_hwif_t *hwif) +{ + int i; + + if (ide_ignore_cable & (1 << hwif->index)) { + printk(KERN_INFO "ide: ignoring cable detection for %s\n", + hwif->name); + hwif->cbl = ATA_CBL_PATA40_SHORT; + } + + for (i = 0; i < MAX_DRIVES; i++) + ide_dev_apply_params(&hwif->drives[i]); +} + /* * This is gets invoked once during initialization, to set *everything* up */ @@ -1597,11 +995,6 @@ static int __init ide_init(void) int ret; printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n"); - system_bus_speed = ide_system_bus_speed(); - - printk(KERN_INFO "ide: Assuming %dMHz system bus speed " - "for PIO modes%s\n", system_bus_speed, - idebus_parameter ? "" : "; override with idebus=xx"); ret = bus_register(&ide_bus_type); if (ret < 0) { @@ -1609,54 +1002,33 @@ static int __init ide_init(void) return ret; } - init_ide_data(); + ide_port_class = class_create(THIS_MODULE, "ide_port"); + if (IS_ERR(ide_port_class)) { + ret = PTR_ERR(ide_port_class); + goto out_port_class; + } + ide_port_class->dev_release = ide_port_class_release; proc_ide_create(); return 0; -} - -#ifdef MODULE -static char *options = NULL; -module_param(options, charp, 0); -MODULE_LICENSE("GPL"); -static void __init parse_options (char *line) -{ - char *next = line; - - if (line == NULL || !*line) - return; - while ((line = next) != NULL) { - if ((next = strchr(line,' ')) != NULL) - *next++ = 0; - if (!ide_setup(line)) - printk (KERN_INFO "Unknown option '%s'\n", line); - } -} +out_port_class: + bus_unregister(&ide_bus_type); -int __init init_module (void) -{ - parse_options(options); - return ide_init(); + return ret; } -void __exit cleanup_module (void) +static void __exit ide_exit(void) { - int index; - - for (index = 0; index < MAX_HWIFS; ++index) - ide_unregister(index, 0, 0); - proc_ide_destroy(); + class_destroy(ide_port_class); + bus_unregister(&ide_bus_type); } -#else /* !MODULE */ - -__setup("", ide_setup); - module_init(ide_init); +module_exit(ide_exit); -#endif /* MODULE */ +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/legacy/Makefile b/drivers/ide/legacy/Makefile index 7043ec7d1e05..6939329f89e8 100644 --- a/drivers/ide/legacy/Makefile +++ b/drivers/ide/legacy/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o obj-$(CONFIG_BLK_DEV_DTC2278) += dtc2278.o obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o obj-$(CONFIG_BLK_DEV_QD65XX) += qd65xx.o +obj-$(CONFIG_BLK_DEV_4DRIVES) += ide-4drives.o obj-$(CONFIG_BLK_DEV_GAYLE) += gayle.o obj-$(CONFIG_BLK_DEV_FALCON_IDE) += falconide.o diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index d4d1a6bea599..052125fafcfa 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -49,6 +49,8 @@ #include <asm/io.h> +#define DRV_NAME "ali14xx" + /* port addresses for auto-detection */ #define ALI_NUM_PORTS 4 static const int ports[ALI_NUM_PORTS] __initdata = @@ -86,7 +88,7 @@ static u8 regOff; /* output to base port to close registers */ /* * Read a controller register. */ -static inline u8 inReg (u8 reg) +static inline u8 inReg(u8 reg) { outb_p(reg, regPort); return inb(dataPort); @@ -95,7 +97,7 @@ static inline u8 inReg (u8 reg) /* * Write a controller register. */ -static void outReg (u8 data, u8 reg) +static void outReg(u8 data, u8 reg) { outb_p(reg, regPort); outb_p(data, dataPort); @@ -114,7 +116,7 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio) int time1, time2; u8 param1, param2, param3, param4; unsigned long flags; - int bus_speed = system_bus_clock(); + int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; /* calculate timing, according to PIO mode */ time1 = ide_pio_cycle_time(drive, pio); @@ -143,7 +145,7 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio) /* * Auto-detect the IDE controller port. */ -static int __init findPort (void) +static int __init findPort(void) { int i; u8 t; @@ -175,7 +177,8 @@ static int __init findPort (void) /* * Initialize controller registers with default values. */ -static int __init initRegisters (void) { +static int __init initRegisters(void) +{ const RegInitializer *p; u8 t; unsigned long flags; @@ -191,16 +194,20 @@ static int __init initRegisters (void) { return t; } +static const struct ide_port_ops ali14xx_port_ops = { + .set_pio_mode = ali14xx_set_pio_mode, +}; + static const struct ide_port_info ali14xx_port_info = { + .name = DRV_NAME, .chipset = ide_ali14xx, - .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE, + .port_ops = &ali14xx_port_ops, + .host_flags = IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO4, }; static int __init ali14xx_probe(void) { - static u8 idx[4] = { 0, 1, 0xff, 0xff }; - printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n", basePort, regOn); @@ -210,15 +217,10 @@ static int __init ali14xx_probe(void) return 1; } - ide_hwifs[0].set_pio_mode = &ali14xx_set_pio_mode; - ide_hwifs[1].set_pio_mode = &ali14xx_set_pio_mode; - - ide_device_add(idx, &ali14xx_port_info); - - return 0; + return ide_legacy_device_add(&ali14xx_port_info, 0); } -int probe_ali14xx = 0; +static int probe_ali14xx; module_param_named(probe, probe_ali14xx, bool, 0); MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets"); diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index 50ffa871d5e9..25551282f31d 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -221,15 +221,12 @@ fail_base2: buddha_setup_ports(&hw, base, ctl, irq_port, ack_intr); - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif) { u8 index = hwif->index; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; - idx[i] = index; } } diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c index 73396f70f2b7..af791a02a120 100644 --- a/drivers/ide/legacy/dtc2278.c +++ b/drivers/ide/legacy/dtc2278.c @@ -16,6 +16,8 @@ #include <asm/io.h> +#define DRV_NAME "dtc2278" + /* * Changing this #undef to #define may solve start up problems in some systems. */ @@ -86,29 +88,26 @@ static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio) } } +static const struct ide_port_ops dtc2278_port_ops = { + .set_pio_mode = dtc2278_set_pio_mode, +}; + static const struct ide_port_info dtc2278_port_info __initdata = { + .name = DRV_NAME, .chipset = ide_dtc2278, + .port_ops = &dtc2278_port_ops, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_UNMASK_IRQS | IDE_HFLAG_IO_32BIT | /* disallow ->io_32bit changes */ IDE_HFLAG_NO_IO_32BIT | - IDE_HFLAG_NO_DMA | - IDE_HFLAG_NO_AUTOTUNE, + IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO4, }; static int __init dtc2278_probe(void) { unsigned long flags; - ide_hwif_t *hwif, *mate; - static u8 idx[4] = { 0, 1, 0xff, 0xff }; - - hwif = &ide_hwifs[0]; - mate = &ide_hwifs[1]; - - if (hwif->chipset != ide_unknown || mate->chipset != ide_unknown) - return 1; local_irq_save(flags); /* @@ -128,14 +127,10 @@ static int __init dtc2278_probe(void) #endif local_irq_restore(flags); - hwif->set_pio_mode = &dtc2278_set_pio_mode; - - ide_device_add(idx, &dtc2278_port_info); - - return 0; + return ide_legacy_device_add(&dtc2278_port_info, 0); } -int probe_dtc2278 = 0; +static int probe_dtc2278; module_param_named(probe, probe_dtc2278, bool, 0); MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets"); diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index 8949ce71bddc..c76a5546585d 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -22,6 +22,7 @@ #include <asm/atariints.h> #include <asm/atari_stdma.h> +#define DRV_NAME "falconide" /* * Base of the IDE interface @@ -74,14 +75,18 @@ static int __init falconide_init(void) printk(KERN_INFO "ide: Falcon IDE controller\n"); + if (!request_mem_region(ATA_HD_BASE, 0x40, DRV_NAME)) { + printk(KERN_ERR "%s: resources busy\n", DRV_NAME); + return -EBUSY; + } + falconide_setup_ports(&hw); - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif) { u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); ide_get_lock(NULL, NULL); diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index b7d81090d5da..1c28c28748fb 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -62,7 +62,10 @@ GAYLE_NUM_HWIFS-1) #define GAYLE_HAS_CONTROL_REG (!ide_doubler) #define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000) -int ide_doubler = 0; /* support IDE doublers? */ + +static int ide_doubler; +module_param_named(doubler, ide_doubler, bool, 0); +MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); #endif /* CONFIG_BLK_DEV_IDEDOUBLER */ @@ -175,15 +178,12 @@ found: gayle_setup_ports(&hw, base, ctrlport, irqport, ack_intr); - hwif = ide_find_port(base); + hwif = ide_find_port(); if (hwif) { u8 index = hwif->index; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; - idx[i] = index; } else release_mem_region(res_start, res_n); diff --git a/drivers/ide/legacy/hd.c b/drivers/ide/legacy/hd.c index 0b0d86731927..abdedf56643e 100644 --- a/drivers/ide/legacy/hd.c +++ b/drivers/ide/legacy/hd.c @@ -122,12 +122,12 @@ static int hd_error; * This struct defines the HD's and their types. */ struct hd_i_struct { - unsigned int head,sect,cyl,wpcom,lzone,ctl; + unsigned int head, sect, cyl, wpcom, lzone, ctl; int unit; int recalibrate; int special_op; }; - + #ifdef HD_TYPE static struct hd_i_struct hd_info[] = { HD_TYPE }; static int NR_HD = ARRAY_SIZE(hd_info); @@ -168,7 +168,7 @@ unsigned long read_timer(void) spin_lock_irqsave(&i8253_lock, flags); t = jiffies * 11932; - outb_p(0, 0x43); + outb_p(0, 0x43); i = inb_p(0x40); i |= inb(0x40) << 8; spin_unlock_irqrestore(&i8253_lock, flags); @@ -183,7 +183,7 @@ static void __init hd_setup(char *str, int *ints) if (ints[0] != 3) return; if (hd_info[0].head != 0) - hdind=1; + hdind = 1; hd_info[hdind].head = ints[2]; hd_info[hdind].sect = ints[3]; hd_info[hdind].cyl = ints[1]; @@ -193,7 +193,7 @@ static void __init hd_setup(char *str, int *ints) NR_HD = hdind+1; } -static void dump_status (const char *msg, unsigned int stat) +static void dump_status(const char *msg, unsigned int stat) { char *name = "hd?"; if (CURRENT) @@ -291,7 +291,6 @@ static int controller_ready(unsigned int drive, unsigned int head) return 0; } - static void hd_out(struct hd_i_struct *disk, unsigned int nsect, unsigned int sect, @@ -313,15 +312,15 @@ static void hd_out(struct hd_i_struct *disk, return; } SET_HANDLER(intr_addr); - outb_p(disk->ctl,HD_CMD); - port=HD_DATA; - outb_p(disk->wpcom>>2,++port); - outb_p(nsect,++port); - outb_p(sect,++port); - outb_p(cyl,++port); - outb_p(cyl>>8,++port); - outb_p(0xA0|(disk->unit<<4)|head,++port); - outb_p(cmd,++port); + outb_p(disk->ctl, HD_CMD); + port = HD_DATA; + outb_p(disk->wpcom >> 2, ++port); + outb_p(nsect, ++port); + outb_p(sect, ++port); + outb_p(cyl, ++port); + outb_p(cyl >> 8, ++port); + outb_p(0xA0 | (disk->unit << 4) | head, ++port); + outb_p(cmd, ++port); } static void hd_request (void); @@ -344,14 +343,14 @@ static void reset_controller(void) { int i; - outb_p(4,HD_CMD); - for(i = 0; i < 1000; i++) barrier(); - outb_p(hd_info[0].ctl & 0x0f,HD_CMD); - for(i = 0; i < 1000; i++) barrier(); + outb_p(4, HD_CMD); + for (i = 0; i < 1000; i++) barrier(); + outb_p(hd_info[0].ctl & 0x0f, HD_CMD); + for (i = 0; i < 1000; i++) barrier(); if (drive_busy()) printk("hd: controller still busy\n"); else if ((hd_error = inb(HD_ERROR)) != 1) - printk("hd: controller reset failed: %02x\n",hd_error); + printk("hd: controller reset failed: %02x\n", hd_error); } static void reset_hd(void) @@ -371,8 +370,8 @@ repeat: if (++i < NR_HD) { struct hd_i_struct *disk = &hd_info[i]; disk->special_op = disk->recalibrate = 1; - hd_out(disk,disk->sect,disk->sect,disk->head-1, - disk->cyl,WIN_SPECIFY,&reset_hd); + hd_out(disk, disk->sect, disk->sect, disk->head-1, + disk->cyl, WIN_SPECIFY, &reset_hd); if (reset) goto repeat; } else @@ -393,7 +392,7 @@ static void unexpected_hd_interrupt(void) unsigned int stat = inb_p(HD_STATUS); if (stat & (BUSY_STAT|DRQ_STAT|ECC_STAT|ERR_STAT)) { - dump_status ("unexpected interrupt", stat); + dump_status("unexpected interrupt", stat); SET_TIMER; } } @@ -453,7 +452,7 @@ static void read_intr(void) return; ok_to_read: req = CURRENT; - insw(HD_DATA,req->buffer,256); + insw(HD_DATA, req->buffer, 256); req->sector++; req->buffer += 512; req->errors = 0; @@ -507,7 +506,7 @@ ok_to_write: end_request(req, 1); if (i > 0) { SET_HANDLER(&write_intr); - outsw(HD_DATA,req->buffer,256); + outsw(HD_DATA, req->buffer, 256); local_irq_enable(); } else { #if (HD_DELAY > 0) @@ -560,11 +559,11 @@ static int do_special_op(struct hd_i_struct *disk, struct request *req) { if (disk->recalibrate) { disk->recalibrate = 0; - hd_out(disk,disk->sect,0,0,0,WIN_RESTORE,&recal_intr); + hd_out(disk, disk->sect, 0, 0, 0, WIN_RESTORE, &recal_intr); return reset; } if (disk->head > 16) { - printk ("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name); + printk("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name); end_request(req, 0); } disk->special_op = 0; @@ -633,19 +632,21 @@ repeat: if (blk_fs_request(req)) { switch (rq_data_dir(req)) { case READ: - hd_out(disk,nsect,sec,head,cyl,WIN_READ,&read_intr); + hd_out(disk, nsect, sec, head, cyl, WIN_READ, + &read_intr); if (reset) goto repeat; break; case WRITE: - hd_out(disk,nsect,sec,head,cyl,WIN_WRITE,&write_intr); + hd_out(disk, nsect, sec, head, cyl, WIN_WRITE, + &write_intr); if (reset) goto repeat; if (wait_DRQ()) { bad_rw_intr(); goto repeat; } - outsw(HD_DATA,req->buffer,256); + outsw(HD_DATA, req->buffer, 256); break; default: printk("unknown hd-command\n"); @@ -655,7 +656,7 @@ repeat: } } -static void do_hd_request (struct request_queue * q) +static void do_hd_request(struct request_queue *q) { disable_irq(HD_IRQ); hd_request(); @@ -708,12 +709,12 @@ static int __init hd_init(void) { int drive; - if (register_blkdev(MAJOR_NR,"hd")) + if (register_blkdev(MAJOR_NR, "hd")) return -1; hd_queue = blk_init_queue(do_hd_request, &hd_lock); if (!hd_queue) { - unregister_blkdev(MAJOR_NR,"hd"); + unregister_blkdev(MAJOR_NR, "hd"); return -ENOMEM; } @@ -742,7 +743,7 @@ static int __init hd_init(void) goto out; } - for (drive=0 ; drive < NR_HD ; drive++) { + for (drive = 0 ; drive < NR_HD ; drive++) { struct gendisk *disk = alloc_disk(64); struct hd_i_struct *p = &hd_info[drive]; if (!disk) @@ -756,7 +757,7 @@ static int __init hd_init(void) disk->queue = hd_queue; p->unit = drive; hd_gendisk[drive] = disk; - printk ("%s: %luMB, CHS=%d/%d/%d\n", + printk("%s: %luMB, CHS=%d/%d/%d\n", disk->disk_name, (unsigned long)get_capacity(disk)/2048, p->cyl, p->head, p->sect); } @@ -776,7 +777,7 @@ static int __init hd_init(void) } /* Let them fly */ - for(drive=0; drive < NR_HD; drive++) + for (drive = 0; drive < NR_HD; drive++) add_disk(hd_gendisk[drive]); return 0; @@ -791,7 +792,7 @@ out1: NR_HD = 0; out: del_timer(&device_timer); - unregister_blkdev(MAJOR_NR,"hd"); + unregister_blkdev(MAJOR_NR, "hd"); blk_cleanup_queue(hd_queue); return -1; Enomem: @@ -800,7 +801,8 @@ Enomem: goto out; } -static int __init parse_hd_setup (char *line) { +static int __init parse_hd_setup(char *line) +{ int ints[6]; (void) get_options(line, ARRAY_SIZE(ints), ints); diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index 78ca68e60f97..ab2434f2d2b8 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -35,6 +35,7 @@ * Try: http://www.maf.iki.fi/~maf/ht6560b/ */ +#define DRV_NAME "ht6560b" #define HT6560B_VERSION "v0.08" #include <linux/module.h> @@ -82,7 +83,7 @@ * out how they setup those cycle time interfacing values, as they at Holtek * call them. IDESETUP.COM that is supplied with the drivers figures out * optimal values and fetches those values to drivers. I found out that - * they use IDE_SELECT_REG to fetch timings to the ide board right after + * they use Select register to fetch timings to the ide board right after * interface switching. After that it was quite easy to add code to * ht6560b.c. * @@ -127,6 +128,7 @@ */ static void ht6560b_selectproc (ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; unsigned long flags; static u8 current_select = 0; static u8 current_timing = 0; @@ -155,8 +157,8 @@ static void ht6560b_selectproc (ide_drive_t *drive) /* * Set timing for this drive: */ - outb(timing, IDE_SELECT_REG); - (void)inb(IDE_STATUS_REG); + outb(timing, hwif->io_ports[IDE_SELECT_OFFSET]); + (void)inb(hwif->io_ports[IDE_STATUS_OFFSET]); #ifdef DEBUG printk("ht6560b: %s: select=%#x timing=%#x\n", drive->name, select, timing); @@ -193,9 +195,9 @@ static int __init try_to_init_ht6560b(void) * Ht6560b autodetected */ outb(HT_CONFIG_DEFAULT, HT_CONFIG_PORT); - outb(HT_TIMING_DEFAULT, 0x1f6); /* IDE_SELECT_REG */ - (void) inb(0x1f7); /* IDE_STATUS_REG */ - + outb(HT_TIMING_DEFAULT, 0x1f6); /* Select register */ + (void)inb(0x1f7); /* Status register */ + printk("ht6560b " HT6560B_VERSION ": chipset detected and initialized" #ifdef DEBUG @@ -210,8 +212,8 @@ static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio) { int active_time, recovery_time; int active_cycles, recovery_cycles; - int bus_speed = system_bus_clock(); - + int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; + if (pio) { unsigned int cycle_time; @@ -321,54 +323,44 @@ static void __init ht6560b_port_init_devs(ide_hwif_t *hwif) hwif->drives[1].drive_data = t; } -int probe_ht6560b = 0; +static int probe_ht6560b; module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); +static const struct ide_port_ops ht6560b_port_ops = { + .port_init_devs = ht6560b_port_init_devs, + .set_pio_mode = ht6560b_set_pio_mode, + .selectproc = ht6560b_selectproc, +}; + static const struct ide_port_info ht6560b_port_info __initdata = { + .name = DRV_NAME, .chipset = ide_ht6560b, + .port_ops = &ht6560b_port_ops, .host_flags = IDE_HFLAG_SERIALIZE | /* is this needed? */ IDE_HFLAG_NO_DMA | - IDE_HFLAG_NO_AUTOTUNE | IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO4, }; static int __init ht6560b_init(void) { - ide_hwif_t *hwif, *mate; - static u8 idx[4] = { 0, 1, 0xff, 0xff }; - if (probe_ht6560b == 0) return -ENODEV; - hwif = &ide_hwifs[0]; - mate = &ide_hwifs[1]; - - if (!request_region(HT_CONFIG_PORT, 1, hwif->name)) { + if (!request_region(HT_CONFIG_PORT, 1, DRV_NAME)) { printk(KERN_NOTICE "%s: HT_CONFIG_PORT not found\n", - __FUNCTION__); + __func__); return -ENODEV; } if (!try_to_init_ht6560b()) { - printk(KERN_NOTICE "%s: HBA not found\n", __FUNCTION__); + printk(KERN_NOTICE "%s: HBA not found\n", __func__); goto release_region; } - hwif->selectproc = &ht6560b_selectproc; - hwif->set_pio_mode = &ht6560b_set_pio_mode; - - mate->selectproc = &ht6560b_selectproc; - mate->set_pio_mode = &ht6560b_set_pio_mode; - - hwif->port_init_devs = ht6560b_port_init_devs; - mate->port_init_devs = ht6560b_port_init_devs; - - ide_device_add(idx, &ht6560b_port_info); - - return 0; + return ide_legacy_device_add(&ht6560b_port_info, 0); release_region: release_region(HT_CONFIG_PORT, 1); diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c new file mode 100644 index 000000000000..ecae916a3385 --- /dev/null +++ b/drivers/ide/legacy/ide-4drives.c @@ -0,0 +1,72 @@ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/ide.h> + +#define DRV_NAME "ide-4drives" + +static int probe_4drives; + +module_param_named(probe, probe_4drives, bool, 0); +MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); + +static int __init ide_4drives_init(void) +{ + ide_hwif_t *hwif, *mate; + unsigned long base = 0x1f0, ctl = 0x3f6; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + hw_regs_t hw; + + if (probe_4drives == 0) + return -ENODEV; + + if (!request_region(base, 8, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", + DRV_NAME, base, base + 7); + return -EBUSY; + } + + if (!request_region(ctl, 1, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", + DRV_NAME, ctl); + release_region(base, 8); + return -EBUSY; + } + + memset(&hw, 0, sizeof(hw)); + + ide_std_init_ports(&hw, base, ctl); + hw.irq = 14; + hw.chipset = ide_4drives; + + hwif = ide_find_port(); + if (hwif) { + ide_init_port_hw(hwif, &hw); + idx[0] = hwif->index; + } + + mate = ide_find_port(); + if (mate) { + ide_init_port_hw(mate, &hw); + mate->drives[0].select.all ^= 0x20; + mate->drives[1].select.all ^= 0x20; + idx[1] = mate->index; + + if (hwif) { + hwif->mate = mate; + mate->mate = hwif; + hwif->serialized = mate->serialized = 1; + } + } + + ide_device_add(idx, NULL); + + return 0; +} + +module_init(ide_4drives_init); + +MODULE_AUTHOR("Bartlomiej Zolnierkiewicz"); +MODULE_DESCRIPTION("generic IDE chipset with 4 drives/port support"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 15ccf6944ae2..7ffd1cce7b89 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -51,6 +51,8 @@ #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> +#define DRV_NAME "ide-cs" + /*====================================================================*/ /* Module parameters */ @@ -72,16 +74,11 @@ static char *version = /*====================================================================*/ -static const char ide_major[] = { - IDE0_MAJOR, IDE1_MAJOR, IDE2_MAJOR, IDE3_MAJOR, - IDE4_MAJOR, IDE5_MAJOR -}; - typedef struct ide_info_t { struct pcmcia_device *p_dev; + ide_hwif_t *hwif; int ndev; dev_node_t node; - int hd; } ide_info_t; static void ide_release(struct pcmcia_device *); @@ -136,45 +133,70 @@ static int ide_probe(struct pcmcia_device *link) static void ide_detach(struct pcmcia_device *link) { + ide_info_t *info = link->priv; + ide_hwif_t *hwif = info->hwif; + DEBUG(0, "ide_detach(0x%p)\n", link); ide_release(link); - kfree(link->priv); + release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1); + release_region(hwif->io_ports[IDE_DATA_OFFSET], 8); + + kfree(info); } /* ide_detach */ -static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle) +static const struct ide_port_ops idecs_port_ops = { + .quirkproc = ide_undecoded_slave, +}; + +static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, + unsigned long irq, struct pcmcia_device *handle) { ide_hwif_t *hwif; hw_regs_t hw; int i; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + if (!request_region(io, 8, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", + DRV_NAME, io, io + 7); + return NULL; + } + + if (!request_region(ctl, 1, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", + DRV_NAME, ctl); + release_region(io, 8); + return NULL; + } + memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, io, ctl); hw.irq = irq; hw.chipset = ide_pci; hw.dev = &handle->dev; - hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif == NULL) - return -1; + goto out_release; i = hwif->index; - if (hwif->present) - ide_unregister(i, 0, 0); - else if (!hwif->hold) - ide_init_port_data(hwif, i); - ide_init_port_hw(hwif, &hw); - hwif->quirkproc = &ide_undecoded_slave; + hwif->port_ops = &idecs_port_ops; idx[0] = i; ide_device_add(idx, NULL); - return hwif->present ? i : -1; + if (hwif->present) + return hwif; + +out_release: + release_region(ctl, 1); + release_region(io, 8); + return NULL; } /*====================================================================== @@ -199,8 +221,9 @@ static int ide_config(struct pcmcia_device *link) cistpl_cftable_entry_t dflt; } *stk = NULL; cistpl_cftable_entry_t *cfg; - int i, pass, last_ret = 0, last_fn = 0, hd, is_kme = 0; + int i, pass, last_ret = 0, last_fn = 0, is_kme = 0; unsigned long io_base, ctl_base; + ide_hwif_t *hwif; DEBUG(0, "ide_config(0x%p)\n", link); @@ -296,14 +319,15 @@ static int ide_config(struct pcmcia_device *link) outb(0x81, ctl_base+1); /* retry registration in case device is still spinning up */ - for (hd = -1, i = 0; i < 10; i++) { - hd = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); - if (hd >= 0) break; + for (i = 0; i < 10; i++) { + hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); + if (hwif) + break; if (link->io.NumPorts1 == 0x20) { outb(0x02, ctl_base + 0x10); - hd = idecs_register(io_base + 0x10, ctl_base + 0x10, - link->irq.AssignedIRQ, link); - if (hd >= 0) { + hwif = idecs_register(io_base + 0x10, ctl_base + 0x10, + link->irq.AssignedIRQ, link); + if (hwif) { io_base += 0x10; ctl_base += 0x10; break; @@ -312,7 +336,7 @@ static int ide_config(struct pcmcia_device *link) msleep(100); } - if (hd < 0) { + if (hwif == NULL) { printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx" ", irq %u failed\n", io_base, ctl_base, link->irq.AssignedIRQ); @@ -320,10 +344,10 @@ static int ide_config(struct pcmcia_device *link) } info->ndev = 1; - sprintf(info->node.dev_name, "hd%c", 'a' + (hd * 2)); - info->node.major = ide_major[hd]; + sprintf(info->node.dev_name, "hd%c", 'a' + hwif->index * 2); + info->node.major = hwif->major; info->node.minor = 0; - info->hd = hd; + info->hwif = hwif; link->dev_node = &info->node; printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n", info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10); @@ -354,13 +378,14 @@ failed: void ide_release(struct pcmcia_device *link) { ide_info_t *info = link->priv; + ide_hwif_t *hwif = info->hwif; DEBUG(0, "ide_release(0x%p)\n", link); if (info->ndev) { /* FIXME: if this fails we need to queue the cleanup somehow -- need to investigate the required PCMCIA magic */ - ide_unregister(info->hd, 0, 0); + ide_unregister(hwif); } info->ndev = 0; diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c index 688fcae17488..f16ab4e80adc 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/legacy/ide_platform.c @@ -89,7 +89,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) res_alt->start, res_alt->end - res_alt->start + 1); } - hwif = ide_find_port((unsigned long)base); + hwif = ide_find_port(); if (!hwif) { ret = -ENODEV; goto out; @@ -101,10 +101,8 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) ide_init_port_hw(hwif, &hw); - if (mmio) { - hwif->mmio = 1; + if (mmio) default_hwif_mmiops(hwif); - } idx[0] = hwif->index; @@ -122,7 +120,7 @@ static int __devexit plat_ide_remove(struct platform_device *pdev) { ide_hwif_t *hwif = pdev->dev.driver_data; - ide_unregister(hwif->index, 0, 0); + ide_unregister(hwif); return 0; } diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index 9a79098d9eb4..4048eeb1675c 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -120,16 +120,13 @@ static int __init macide_init(void) macide_setup_ports(&hw, base, irq, ack_intr); - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif) { u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; - ide_device_add(idx, NULL); } diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index 1381b91bc316..703c50e1d346 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -137,11 +137,9 @@ static int __init q40ide_init(void) // m68kide_iops, q40ide_default_irq(pcide_bases[i])); - hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif) { - ide_init_port_data(hwif, hwif->index); ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; idx[i] = hwif->index; } diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 2f4f47ad602f..51dba82f8812 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -11,11 +11,7 @@ * * QDI QD6500/QD6580 EIDE controller fast support * - * Please set local bus speed using kernel parameter idebus - * for example, "idebus=33" stands for 33Mhz VLbus * To activate controller support, use "ide0=qd65xx" - * To enable tuning, use "hda=autotune hdb=autotune" - * To enable 2nd channel tuning (qd6580 only), use "hdc=autotune hdd=autotune" */ /* @@ -37,6 +33,8 @@ #include <asm/system.h> #include <asm/io.h> +#define DRV_NAME "qd65xx" + #include "qd65xx.h" /* @@ -88,12 +86,12 @@ static int timings[4]={-1,-1,-1,-1}; /* stores current timing for each timer */ /* - * qd_select: + * qd65xx_select: * - * This routine is invoked from ide.c to prepare for access to a given drive. + * This routine is invoked to prepare for access to a given drive. */ -static void qd_select (ide_drive_t *drive) +static void qd65xx_select(ide_drive_t *drive) { u8 index = (( (QD_TIMREG(drive)) & 0x80 ) >> 7) | (QD_TIMREG(drive) & 0x02); @@ -112,17 +110,18 @@ static void qd_select (ide_drive_t *drive) static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery_time) { - u8 active_cycle,recovery_cycle; + int clk = ide_vlb_clk ? ide_vlb_clk : 50; + u8 act_cyc, rec_cyc; - if (system_bus_clock()<=33) { - active_cycle = 9 - IDE_IN(active_time * system_bus_clock() / 1000 + 1, 2, 9); - recovery_cycle = 15 - IDE_IN(recovery_time * system_bus_clock() / 1000 + 1, 0, 15); + if (clk <= 33) { + act_cyc = 9 - IDE_IN(active_time * clk / 1000 + 1, 2, 9); + rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 0, 15); } else { - active_cycle = 8 - IDE_IN(active_time * system_bus_clock() / 1000 + 1, 1, 8); - recovery_cycle = 18 - IDE_IN(recovery_time * system_bus_clock() / 1000 + 1, 3, 18); + act_cyc = 8 - IDE_IN(active_time * clk / 1000 + 1, 1, 8); + rec_cyc = 18 - IDE_IN(recovery_time * clk / 1000 + 1, 3, 18); } - return((recovery_cycle<<4) | 0x08 | active_cycle); + return (rec_cyc << 4) | 0x08 | act_cyc; } /* @@ -133,10 +132,13 @@ static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery static u8 qd6580_compute_timing (int active_time, int recovery_time) { - u8 active_cycle = 17 - IDE_IN(active_time * system_bus_clock() / 1000 + 1, 2, 17); - u8 recovery_cycle = 15 - IDE_IN(recovery_time * system_bus_clock() / 1000 + 1, 2, 15); + int clk = ide_vlb_clk ? ide_vlb_clk : 50; + u8 act_cyc, rec_cyc; + + act_cyc = 17 - IDE_IN(active_time * clk / 1000 + 1, 2, 17); + rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 2, 15); - return((recovery_cycle<<4) | active_cycle); + return (rec_cyc << 4) | act_cyc; } /* @@ -168,36 +170,15 @@ static int qd_find_disk_type (ide_drive_t *drive, } /* - * qd_timing_ok: - * - * check whether timings don't conflict - */ - -static int qd_timing_ok (ide_drive_t drives[]) -{ - return (IDE_IMPLY(drives[0].present && drives[1].present, - IDE_IMPLY(QD_TIMREG(drives) == QD_TIMREG(drives+1), - QD_TIMING(drives) == QD_TIMING(drives+1)))); - /* if same timing register, must be same timing */ -} - -/* * qd_set_timing: * - * records the timing, and enables selectproc as needed + * records the timing */ static void qd_set_timing (ide_drive_t *drive, u8 timing) { - ide_hwif_t *hwif = HWIF(drive); - drive->drive_data &= 0xff00; drive->drive_data |= timing; - if (qd_timing_ok(hwif->drives)) { - qd_select(drive); /* selects once */ - hwif->selectproc = NULL; - } else - hwif->selectproc = &qd_select; printk(KERN_DEBUG "%s: %#x\n", drive->name, timing); } @@ -225,10 +206,11 @@ static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio) static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio) { - int base = HWIF(drive)->select_data; + ide_hwif_t *hwif = drive->hwif; unsigned int cycle_time; int active_time = 175; int recovery_time = 415; /* worst case values from the dos driver */ + u8 base = (hwif->config_data & 0xff00) >> 8; if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) { cycle_time = ide_pio_cycle_time(drive, pio); @@ -299,21 +281,10 @@ static int __init qd_testreg(int port) return (readreg != QD_TESTVAL); } -/* - * qd_setup: - * - * called to setup an ata channel : adjusts attributes & links for tuning - */ - -static void __init qd_setup(ide_hwif_t *hwif, int base, int config) -{ - hwif->select_data = base; - hwif->config_data = config; -} - static void __init qd6500_port_init_devs(ide_hwif_t *hwif) { - u8 base = hwif->select_data, config = QD_CONFIG(hwif); + u8 base = (hwif->config_data & 0xff00) >> 8; + u8 config = QD_CONFIG(hwif); hwif->drives[0].drive_data = QD6500_DEF_DATA; hwif->drives[1].drive_data = QD6500_DEF_DATA; @@ -322,9 +293,10 @@ static void __init qd6500_port_init_devs(ide_hwif_t *hwif) static void __init qd6580_port_init_devs(ide_hwif_t *hwif) { u16 t1, t2; - u8 base = hwif->select_data, config = QD_CONFIG(hwif); + u8 base = (hwif->config_data & 0xff00) >> 8; + u8 config = QD_CONFIG(hwif); - if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) { + if (hwif->host_flags & IDE_HFLAG_SINGLE) { t1 = QD6580_DEF_DATA; t2 = QD6580_DEF_DATA2; } else @@ -334,11 +306,23 @@ static void __init qd6580_port_init_devs(ide_hwif_t *hwif) hwif->drives[1].drive_data = t2; } +static const struct ide_port_ops qd6500_port_ops = { + .port_init_devs = qd6500_port_init_devs, + .set_pio_mode = qd6500_set_pio_mode, + .selectproc = qd65xx_select, +}; + +static const struct ide_port_ops qd6580_port_ops = { + .port_init_devs = qd6580_port_init_devs, + .set_pio_mode = qd6580_set_pio_mode, + .selectproc = qd65xx_select, +}; + static const struct ide_port_info qd65xx_port_info __initdata = { + .name = DRV_NAME, .chipset = ide_qd65xx, .host_flags = IDE_HFLAG_IO_32BIT | - IDE_HFLAG_NO_DMA | - IDE_HFLAG_NO_AUTOTUNE, + IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO4, }; @@ -351,55 +335,41 @@ static const struct ide_port_info qd65xx_port_info __initdata = { static int __init qd_probe(int base) { - ide_hwif_t *hwif; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - u8 config; - u8 unit; + int rc; + u8 config, unit, control; + struct ide_port_info d = qd65xx_port_info; config = inb(QD_CONFIG_PORT); if (! ((config & QD_CONFIG_BASEPORT) >> 1 == (base == 0xb0)) ) - return 1; + return -ENODEV; unit = ! (config & QD_CONFIG_IDE_BASEPORT); - if ((config & 0xf0) == QD_CONFIG_QD6500) { + if (unit) + d.host_flags |= IDE_HFLAG_QD_2ND_PORT; - if (qd_testreg(base)) return 1; /* bad register */ + switch (config & 0xf0) { + case QD_CONFIG_QD6500: + if (qd_testreg(base)) + return -ENODEV; /* bad register */ - /* qd6500 found */ - - hwif = &ide_hwifs[unit]; - printk(KERN_NOTICE "%s: qd6500 at %#x\n", hwif->name, base); - printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n", - config, QD_ID3); - if (config & QD_CONFIG_DISABLED) { printk(KERN_WARNING "qd6500 is disabled !\n"); - return 1; + return -ENODEV; } - qd_setup(hwif, base, config); - - hwif->port_init_devs = qd6500_port_init_devs; - hwif->set_pio_mode = &qd6500_set_pio_mode; - - idx[unit] = unit; - - ide_device_add(idx, &qd65xx_port_info); - - return 1; - } - - if (((config & 0xf0) == QD_CONFIG_QD6580_A) || - ((config & 0xf0) == QD_CONFIG_QD6580_B)) { - - u8 control; - - if (qd_testreg(base) || qd_testreg(base+0x02)) return 1; - /* bad registers */ + printk(KERN_NOTICE "qd6500 at %#x\n", base); + printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n", + config, QD_ID3); - /* qd6580 found */ + d.port_ops = &qd6500_port_ops; + d.host_flags |= IDE_HFLAG_SINGLE; + break; + case QD_CONFIG_QD6580_A: + case QD_CONFIG_QD6580_B: + if (qd_testreg(base) || qd_testreg(base + 0x02)) + return -ENODEV; /* bad registers */ control = inb(QD_CONTROL_PORT); @@ -409,69 +379,44 @@ static int __init qd_probe(int base) outb(QD_DEF_CONTR, QD_CONTROL_PORT); - if (control & QD_CONTR_SEC_DISABLED) { - /* secondary disabled */ - - hwif = &ide_hwifs[unit]; - printk(KERN_INFO "%s: qd6580: single IDE board\n", - hwif->name); - - qd_setup(hwif, base, config | (control << 8)); - - hwif->port_init_devs = qd6580_port_init_devs; - hwif->set_pio_mode = &qd6580_set_pio_mode; - - idx[unit] = unit; + d.port_ops = &qd6580_port_ops; + if (control & QD_CONTR_SEC_DISABLED) + d.host_flags |= IDE_HFLAG_SINGLE; - ide_device_add(idx, &qd65xx_port_info); - - return 1; - } else { - ide_hwif_t *mate; - - hwif = &ide_hwifs[0]; - mate = &ide_hwifs[1]; - /* secondary enabled */ - printk(KERN_INFO "%s&%s: qd6580: dual IDE board\n", - hwif->name, mate->name); - - qd_setup(hwif, base, config | (control << 8)); - - hwif->port_init_devs = qd6580_port_init_devs; - hwif->set_pio_mode = &qd6580_set_pio_mode; - - qd_setup(mate, base, config | (control << 8)); - - mate->port_init_devs = qd6580_port_init_devs; - mate->set_pio_mode = &qd6580_set_pio_mode; + printk(KERN_INFO "qd6580: %s IDE board\n", + (control & QD_CONTR_SEC_DISABLED) ? "single" : "dual"); + break; + default: + return -ENODEV; + } - idx[0] = 0; - idx[1] = 1; + rc = ide_legacy_device_add(&d, (base << 8) | config); - ide_device_add(idx, &qd65xx_port_info); + if (d.host_flags & IDE_HFLAG_SINGLE) + return (rc == 0) ? 1 : rc; - return 0; /* no other qd65xx possible */ - } - } - /* no qd65xx found */ - return 1; + return rc; } -int probe_qd65xx = 0; +static int probe_qd65xx; module_param_named(probe, probe_qd65xx, bool, 0); MODULE_PARM_DESC(probe, "probe for QD65xx chipsets"); static int __init qd65xx_init(void) { + int rc1, rc2 = -ENODEV; + if (probe_qd65xx == 0) return -ENODEV; - if (qd_probe(0x30)) - qd_probe(0xb0); - if (ide_hwifs[0].chipset != ide_qd65xx && - ide_hwifs[1].chipset != ide_qd65xx) + rc1 = qd_probe(0x30); + if (rc1) + rc2 = qd_probe(0xb0); + + if (rc1 < 0 && rc2 < 0) return -ENODEV; + return 0; } diff --git a/drivers/ide/legacy/qd65xx.h b/drivers/ide/legacy/qd65xx.h index 28dd50a15d55..c83dea85e621 100644 --- a/drivers/ide/legacy/qd65xx.h +++ b/drivers/ide/legacy/qd65xx.h @@ -30,7 +30,6 @@ #define QD_ID3 ((config & QD_CONFIG_ID3)!=0) #define QD_CONFIG(hwif) ((hwif)->config_data & 0x00ff) -#define QD_CONTROL(hwif) (((hwif)->config_data & 0xff00) >> 8) #define QD_TIMING(drive) (byte)(((drive)->drive_data) & 0x00ff) #define QD_TIMREG(drive) (byte)((((drive)->drive_data) & 0xff00) >> 8) diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c index 5696ba026005..b54a14a57755 100644 --- a/drivers/ide/legacy/umc8672.c +++ b/drivers/ide/legacy/umc8672.c @@ -19,7 +19,7 @@ */ /* - * VLB Controller Support from + * VLB Controller Support from * Wolfram Podien * Rohoefe 3 * D28832 Achim @@ -32,7 +32,7 @@ * #define UMC_DRIVE0 11 * in the beginning of the driver, which sets the speed of drive 0 to 11 (there * are some lines present). 0 - 11 are allowed speed values. These values are - * the results from the DOS speed test program supplied from UMC. 11 is the + * the results from the DOS speed test program supplied from UMC. 11 is the * highest speed (about PIO mode 3) */ #define REALLY_SLOW_IO /* some systems can safely undef this */ @@ -51,6 +51,8 @@ #include <asm/io.h> +#define DRV_NAME "umc8672" + /* * Default speeds. These can be changed with "auto-tune" and/or hdparm. */ @@ -60,103 +62,103 @@ #define UMC_DRIVE3 1 /* In case of crash reduce speed */ static u8 current_speeds[4] = {UMC_DRIVE0, UMC_DRIVE1, UMC_DRIVE2, UMC_DRIVE3}; -static const u8 pio_to_umc [5] = {0,3,7,10,11}; /* rough guesses */ +static const u8 pio_to_umc [5] = {0, 3, 7, 10, 11}; /* rough guesses */ /* 0 1 2 3 4 5 6 7 8 9 10 11 */ static const u8 speedtab [3][12] = { - {0xf, 0xb, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 }, - {0x3, 0x2, 0x2, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 }, - {0xff,0xcb,0xc0,0x58,0x36,0x33,0x23,0x22,0x21,0x11,0x10,0x0}}; + {0x0f, 0x0b, 0x02, 0x02, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x1}, + {0x03, 0x02, 0x02, 0x02, 0x02, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x1}, + {0xff, 0xcb, 0xc0, 0x58, 0x36, 0x33, 0x23, 0x22, 0x21, 0x11, 0x10, 0x0} +}; -static void out_umc (char port,char wert) +static void out_umc(char port, char wert) { - outb_p(port,0x108); - outb_p(wert,0x109); + outb_p(port, 0x108); + outb_p(wert, 0x109); } -static inline u8 in_umc (char port) +static inline u8 in_umc(char port) { - outb_p(port,0x108); + outb_p(port, 0x108); return inb_p(0x109); } -static void umc_set_speeds (u8 speeds[]) +static void umc_set_speeds(u8 speeds[]) { int i, tmp; - outb_p(0x5A,0x108); /* enable umc */ + outb_p(0x5A, 0x108); /* enable umc */ - out_umc (0xd7,(speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4))); - out_umc (0xd6,(speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4))); + out_umc(0xd7, (speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4))); + out_umc(0xd6, (speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4))); tmp = 0; - for (i = 3; i >= 0; i--) { + for (i = 3; i >= 0; i--) tmp = (tmp << 2) | speedtab[1][speeds[i]]; + out_umc(0xdc, tmp); + for (i = 0; i < 4; i++) { + out_umc(0xd0 + i, speedtab[2][speeds[i]]); + out_umc(0xd8 + i, speedtab[2][speeds[i]]); } - out_umc (0xdc,tmp); - for (i = 0;i < 4; i++) { - out_umc (0xd0+i,speedtab[2][speeds[i]]); - out_umc (0xd8+i,speedtab[2][speeds[i]]); - } - outb_p(0xa5,0x108); /* disable umc */ + outb_p(0xa5, 0x108); /* disable umc */ - printk ("umc8672: drive speeds [0 to 11]: %d %d %d %d\n", + printk("umc8672: drive speeds [0 to 11]: %d %d %d %d\n", speeds[0], speeds[1], speeds[2], speeds[3]); } static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio) { + ide_hwif_t *hwif = drive->hwif; unsigned long flags; - ide_hwgroup_t *hwgroup = ide_hwifs[HWIF(drive)->index^1].hwgroup; printk("%s: setting umc8672 to PIO mode%d (speed %d)\n", drive->name, pio, pio_to_umc[pio]); spin_lock_irqsave(&ide_lock, flags); - if (hwgroup && hwgroup->handler != NULL) { + if (hwif->mate && hwif->mate->hwgroup->handler) { printk(KERN_ERR "umc8672: other interface is busy: exiting tune_umc()\n"); } else { current_speeds[drive->name[2] - 'a'] = pio_to_umc[pio]; - umc_set_speeds (current_speeds); + umc_set_speeds(current_speeds); } spin_unlock_irqrestore(&ide_lock, flags); } +static const struct ide_port_ops umc8672_port_ops = { + .set_pio_mode = umc_set_pio_mode, +}; + static const struct ide_port_info umc8672_port_info __initdata = { + .name = DRV_NAME, .chipset = ide_umc8672, - .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE, + .port_ops = &umc8672_port_ops, + .host_flags = IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO4, }; static int __init umc8672_probe(void) { unsigned long flags; - static u8 idx[4] = { 0, 1, 0xff, 0xff }; if (!request_region(0x108, 2, "umc8672")) { printk(KERN_ERR "umc8672: ports 0x108-0x109 already in use.\n"); return 1; } local_irq_save(flags); - outb_p(0x5A,0x108); /* enable umc */ + outb_p(0x5A, 0x108); /* enable umc */ if (in_umc (0xd5) != 0xa0) { local_irq_restore(flags); printk(KERN_ERR "umc8672: not found\n"); release_region(0x108, 2); - return 1; + return 1; } - outb_p(0xa5,0x108); /* disable umc */ + outb_p(0xa5, 0x108); /* disable umc */ - umc_set_speeds (current_speeds); + umc_set_speeds(current_speeds); local_irq_restore(flags); - ide_hwifs[0].set_pio_mode = &umc_set_pio_mode; - ide_hwifs[1].set_pio_mode = &umc_set_pio_mode; - - ide_device_add(idx, &umc8672_port_info); - - return 0; + return ide_legacy_device_add(&umc8672_port_info, 0); } -int probe_umc8672 = 0; +static int probe_umc8672; module_param_named(probe, probe_umc8672, bool, 0); MODULE_PARM_DESC(probe, "probe for UMC8672 chipset"); diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 0f4bf5d72835..b3bcffb1775e 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -54,7 +54,6 @@ #define IDE_AU1XXX_BURSTMODE 1 static _auide_hwif auide_hwif; -static int dbdma_init_done; #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) @@ -66,7 +65,7 @@ void auide_insw(unsigned long port, void *addr, u32 count) if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, DDMA_FLAGS_NOIE)) { - printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); + printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); return; } ctp = *((chan_tab_t **)ahwif->rx_chan); @@ -84,7 +83,7 @@ void auide_outsw(unsigned long port, void *addr, u32 count) if(!put_source_flags(ahwif->tx_chan, (void*)addr, count << 1, DDMA_FLAGS_NOIE)) { - printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); + printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); return; } ctp = *((chan_tab_t **)ahwif->tx_chan); @@ -255,7 +254,7 @@ static int auide_build_dmatable(ide_drive_t *drive) (void*) sg_virt(sg), tc, flags)) { printk(KERN_ERR "%s failed %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); } } else { @@ -263,7 +262,7 @@ static int auide_build_dmatable(ide_drive_t *drive) (void*) sg_virt(sg), tc, flags)) { printk(KERN_ERR "%s failed %d\n", - __FUNCTION__, __LINE__); + __func__, __LINE__); } } @@ -320,35 +319,6 @@ static int auide_dma_setup(ide_drive_t *drive) return 0; } -static u8 auide_mdma_filter(ide_drive_t *drive) -{ - /* - * FIXME: ->white_list and ->black_list are based on completely bogus - * ->ide_dma_check implementation which didn't set neither the host - * controller timings nor the device for the desired transfer mode. - * - * They should be either removed or 0x00 MWDMA mask should be - * returned for devices on the ->black_list. - */ - - if (dbdma_init_done == 0) { - auide_hwif.white_list = ide_in_drive_list(drive->id, - dma_white_list); - auide_hwif.black_list = ide_in_drive_list(drive->id, - dma_black_list); - auide_hwif.drive = drive; - auide_ddma_init(&auide_hwif); - dbdma_init_done = 1; - } - - /* Is the drive in our DMA black list? */ - if (auide_hwif.black_list) - printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n", - drive->name, drive->id->model); - - return drive->hwif->mwdma_mask; -} - static int auide_dma_test_irq(ide_drive_t *drive) { if (drive->waiting_for_dma == 0) @@ -401,41 +371,41 @@ static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 de dev->dev_devwidth = devwidth; dev->dev_flags = flags; } - -#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA static void auide_dma_timeout(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name); - if (hwif->ide_dma_test_irq(drive)) + if (auide_dma_test_irq(drive)) return; - hwif->ide_dma_end(drive); + auide_dma_end(drive); } - -static int auide_ddma_init(_auide_hwif *auide) { - +static const struct ide_dma_ops au1xxx_dma_ops = { + .dma_host_set = auide_dma_host_set, + .dma_setup = auide_dma_setup, + .dma_exec_cmd = auide_dma_exec_cmd, + .dma_start = auide_dma_start, + .dma_end = auide_dma_end, + .dma_test_irq = auide_dma_test_irq, + .dma_lost_irq = auide_dma_lost_irq, + .dma_timeout = auide_dma_timeout, +}; + +static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) +{ + _auide_hwif *auide = (_auide_hwif *)hwif->hwif_data; dbdev_tab_t source_dev_tab, target_dev_tab; u32 dev_id, tsize, devwidth, flags; - ide_hwif_t *hwif = auide->hwif; dev_id = AU1XXX_ATA_DDMA_REQ; - if (auide->white_list || auide->black_list) { - tsize = 8; - devwidth = 32; - } - else { - tsize = 1; - devwidth = 16; - - printk(KERN_ERR "au1xxx-ide: %s is not on ide driver whitelist.\n",auide_hwif.drive->id->model); - printk(KERN_ERR " please read 'Documentation/mips/AU1xxx_IDE.README'"); - } + tsize = 8; /* 1 */ + devwidth = 32; /* 16 */ #ifdef IDE_AU1XXX_BURSTMODE flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE; @@ -487,9 +457,9 @@ static int auide_ddma_init(_auide_hwif *auide) { return 0; } #else - -static int auide_ddma_init( _auide_hwif *auide ) +static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) { + _auide_hwif *auide = (_auide_hwif *)hwif->hwif_data; dbdev_tab_t source_dev_tab; int flags; @@ -548,9 +518,18 @@ static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif) *ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET); } +static const struct ide_port_ops au1xxx_port_ops = { + .set_pio_mode = au1xxx_set_pio_mode, + .set_dma_mode = auide_set_dma_mode, +}; + static const struct ide_port_info au1xxx_port_info = { + .init_dma = auide_ddma_init, + .port_ops = &au1xxx_port_ops, +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + .dma_ops = &au1xxx_dma_ops, +#endif .host_flags = IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS, .pio_mask = ATA_PIO4, @@ -603,9 +582,11 @@ static int au_ide_probe(struct device *dev) goto out; } - /* FIXME: This might possibly break PCMCIA IDE devices */ - - hwif = &ide_hwifs[pdev->id]; + hwif = ide_find_port(); + if (hwif == NULL) { + ret = -ENOENT; + goto out; + } memset(&hw, 0, sizeof(hw)); auide_setup_ports(&hw, ahwif); @@ -617,11 +598,6 @@ static int au_ide_probe(struct device *dev) hwif->dev = dev; - /* hold should be on in all cases */ - hwif->hold = 1; - - hwif->mmio = 1; - /* If the user has selected DDMA assisted copies, then set up a few local I/O function entry points */ @@ -630,34 +606,12 @@ static int au_ide_probe(struct device *dev) hwif->INSW = auide_insw; hwif->OUTSW = auide_outsw; #endif - - hwif->set_pio_mode = &au1xxx_set_pio_mode; - hwif->set_dma_mode = &auide_set_dma_mode; - -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - hwif->dma_timeout = &auide_dma_timeout; - - hwif->mdma_filter = &auide_mdma_filter; - - hwif->dma_host_set = &auide_dma_host_set; - hwif->dma_exec_cmd = &auide_dma_exec_cmd; - hwif->dma_start = &auide_dma_start; - hwif->ide_dma_end = &auide_dma_end; - hwif->dma_setup = &auide_dma_setup; - hwif->ide_dma_test_irq = &auide_dma_test_irq; - hwif->dma_lost_irq = &auide_dma_lost_irq; -#endif hwif->select_data = 0; /* no chipset-specific code */ hwif->config_data = 0; /* no chipset-specific code */ auide_hwif.hwif = hwif; hwif->hwif_data = &auide_hwif; -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - auide_ddma_init(&auide_hwif); - dbdma_init_done = 1; -#endif - idx[0] = hwif->index; ide_device_add(idx, &au1xxx_port_info); @@ -677,7 +631,7 @@ static int au_ide_remove(struct device *dev) ide_hwif_t *hwif = dev_get_drvdata(dev); _auide_hwif *ahwif = &auide_hwif; - ide_unregister(hwif->index, 0, 0); + ide_unregister(hwif); iounmap((void *)ahwif->regbase); diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index 956259fc09ba..112fe566bb93 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -76,17 +76,12 @@ static int __devinit swarm_ide_probe(struct device *dev) if (!SIBYTE_HAVE_IDE) return -ENODEV; - /* Find an empty slot. */ - for (i = 0; i < MAX_HWIFS; i++) - if (!ide_hwifs[i].io_ports[IDE_DATA_OFFSET]) - break; - if (i >= MAX_HWIFS) { + hwif = ide_find_port(); + if (hwif == NULL) { printk(KERN_ERR DRV_NAME ": no free slot for interface\n"); return -ENOMEM; } - hwif = ide_hwifs + i; - base = ioremap(A_IO_EXT_BASE, 0x800); offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); @@ -115,10 +110,8 @@ static int __devinit swarm_ide_probe(struct device *dev) /* Setup MMIO ops. */ default_hwif_mmiops(hwif); - /* Prevent resource map manipulation. */ - hwif->mmio = 1; + hwif->chipset = ide_generic; - hwif->noprobe = 0; for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) hwif->io_ports[i] = diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index cfb3265bc1a8..ae7a4329a581 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -135,12 +135,12 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed) static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) { - drive->hwif->set_dma_mode(drive, pio + XFER_PIO_0); + drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0); } static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name) { - int bus_speed = system_bus_clock(); + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; if (bus_speed <= 33) pci_set_drvdata(dev, (void *) aec6xxx_33_base); @@ -175,27 +175,23 @@ static u8 __devinit atp86x_cable_detect(ide_hwif_t *hwif) return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; } -static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - hwif->set_pio_mode = &aec_set_pio_mode; - - if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) - hwif->set_dma_mode = &aec6210_set_mode; - else { - hwif->set_dma_mode = &aec6260_set_mode; +static const struct ide_port_ops atp850_port_ops = { + .set_pio_mode = aec_set_pio_mode, + .set_dma_mode = aec6210_set_mode, +}; - hwif->cable_detect = atp86x_cable_detect; - } -} +static const struct ide_port_ops atp86x_port_ops = { + .set_pio_mode = aec_set_pio_mode, + .set_dma_mode = aec6260_set_mode, + .cable_detect = atp86x_cable_detect, +}; static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { { /* 0 */ .name = "AEC6210", .init_chipset = init_chipset_aec62xx, - .init_hwif = init_hwif_aec62xx, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, + .port_ops = &atp850_port_ops, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_DSC | @@ -207,7 +203,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { },{ /* 1 */ .name = "AEC6260", .init_chipset = init_chipset_aec62xx, - .init_hwif = init_hwif_aec62xx, + .port_ops = &atp86x_port_ops, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA | IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_OFF_BOARD, @@ -217,17 +213,18 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { },{ /* 2 */ .name = "AEC6260R", .init_chipset = init_chipset_aec62xx, - .init_hwif = init_hwif_aec62xx, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, + .port_ops = &atp86x_port_ops, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_ABUSE_SET_DMA_MODE, + IDE_HFLAG_ABUSE_SET_DMA_MODE | + IDE_HFLAG_NON_BOOTABLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, },{ /* 3 */ .name = "AEC6280", .init_chipset = init_chipset_aec62xx, - .init_hwif = init_hwif_aec62xx, + .port_ops = &atp86x_port_ops, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_OFF_BOARD, @@ -237,8 +234,8 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = { },{ /* 4 */ .name = "AEC6280R", .init_chipset = init_chipset_aec62xx, - .init_hwif = init_hwif_aec62xx, .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, + .port_ops = &atp86x_port_ops, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_OFF_BOARD, diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index b3b6f514ce2d..95370df56672 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -294,7 +294,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) int s_time, a_time, c_time; u8 s_clc, a_clc, r_clc; unsigned long flags; - int bus_speed = system_bus_clock(); + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; int port = hwif->channel ? 0x5c : 0x58; int portFIFO = hwif->channel ? 0x55 : 0x54; u8 cd_dma_fifo = 0; @@ -610,7 +610,7 @@ static int ali_cable_override(struct pci_dev *pdev) } /** - * ata66_ali15x3 - check for UDMA 66 support + * ali_cable_detect - cable detection * @hwif: IDE interface * * This checks if the controller and the cable are capable @@ -620,7 +620,7 @@ static int ali_cable_override(struct pci_dev *pdev) * FIXME: frobs bits that are not defined on newer ALi devicea */ -static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif) +static u8 __devinit ali_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long flags; @@ -652,27 +652,7 @@ static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif) return cbl; } -/** - * init_hwif_common_ali15x3 - Set up ALI IDE hardware - * @hwif: IDE interface - * - * Initialize the IDE structure side of the ALi 15x3 driver. - */ - -static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &ali_set_pio_mode; - hwif->set_dma_mode = &ali_set_dma_mode; - hwif->udma_filter = &ali_udma_filter; - - hwif->cable_detect = ata66_ali15x3; - - if (hwif->dma_base == 0) - return; - - hwif->dma_setup = &ali15x3_dma_setup; -} - +#ifndef CONFIG_SPARC64 /** * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff * @hwif: interface to configure @@ -722,35 +702,66 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) if(irq >= 0) hwif->irq = irq; } - - init_hwif_common_ali15x3(hwif); } +#endif /** * init_dma_ali15x3 - set up DMA on ALi15x3 * @hwif: IDE interface - * @dmabase: DMA interface base PCI address + * @d: IDE port info * - * Set up the DMA functionality on the ALi 15x3. For the ALi - * controllers this is generic so we can let the generic code do - * the actual work. + * Set up the DMA functionality on the ALi 15x3. */ -static void __devinit init_dma_ali15x3 (ide_hwif_t *hwif, unsigned long dmabase) +static int __devinit init_dma_ali15x3(ide_hwif_t *hwif, + const struct ide_port_info *d) { - if (m5229_revision < 0x20) - return; + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long base = ide_pci_dma_base(hwif, d); + + if (base == 0 || ide_pci_set_master(dev, d->name) < 0) + return -1; + if (!hwif->channel) - outb(inb(dmabase + 2) & 0x60, dmabase + 2); - ide_setup_dma(hwif, dmabase); + outb(inb(base + 2) & 0x60, base + 2); + + printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", + hwif->name, base, base + 7); + + if (ide_allocate_dma_engine(hwif)) + return -1; + + ide_setup_dma(hwif, base); + + return 0; } +static const struct ide_port_ops ali_port_ops = { + .set_pio_mode = ali_set_pio_mode, + .set_dma_mode = ali_set_dma_mode, + .udma_filter = ali_udma_filter, + .cable_detect = ali_cable_detect, +}; + +static const struct ide_dma_ops ali_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ali15x3_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = __ide_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + static const struct ide_port_info ali15x3_chipset __devinitdata = { .name = "ALI15X3", .init_chipset = init_chipset_ali15x3, +#ifndef CONFIG_SPARC64 .init_hwif = init_hwif_ali15x3, +#endif .init_dma = init_dma_ali15x3, - .host_flags = IDE_HFLAG_BOOTABLE, + .port_ops = &ali_port_ops, .pio_mask = ATA_PIO5, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, @@ -793,14 +804,17 @@ static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_dev d.udma_mask = ATA_UDMA5; else d.udma_mask = ATA_UDMA6; + + d.dma_ops = &ali_dma_ops; + } else { + d.host_flags |= IDE_HFLAG_NO_DMA; + + d.mwdma_mask = d.swdma_mask = 0; } if (idx == 0) d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX; -#if defined(CONFIG_SPARC64) - d.init_hwif = init_hwif_common_ali15x3; -#endif /* CONFIG_SPARC64 */ return ide_setup_pci_device(dev, &d); } diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 2ef890ce8097..41c87cb5e16e 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -179,7 +179,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, * Determine the system bus clock. */ - amd_clock = system_bus_clock() * 1000; + amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000; switch (amd_clock) { case 33000: amd_clock = 33333; break; @@ -210,21 +210,20 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) if (hwif->irq == 0) /* 0 is bogus but will do for now */ hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel); - - hwif->set_pio_mode = &amd_set_pio_mode; - hwif->set_dma_mode = &amd_set_drive; - - hwif->cable_detect = amd_cable_detect; } +static const struct ide_port_ops amd_port_ops = { + .set_pio_mode = amd_set_pio_mode, + .set_dma_mode = amd_set_drive, + .cable_detect = amd_cable_detect, +}; + #define IDE_HFLAGS_AMD \ (IDE_HFLAG_PIO_NO_BLACKLIST | \ - IDE_HFLAG_PIO_NO_DOWNGRADE | \ IDE_HFLAG_ABUSE_SET_DMA_MODE | \ IDE_HFLAG_POST_SET_MODE | \ IDE_HFLAG_IO_32BIT | \ - IDE_HFLAG_UNMASK_IRQS | \ - IDE_HFLAG_BOOTABLE) + IDE_HFLAG_UNMASK_IRQS) #define DECLARE_AMD_DEV(name_str, swdma, udma) \ { \ @@ -232,6 +231,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) .init_chipset = init_chipset_amd74xx, \ .init_hwif = init_hwif_amd74xx, \ .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \ + .port_ops = &amd_port_ops, \ .host_flags = IDE_HFLAGS_AMD, \ .pio_mask = ATA_PIO5, \ .swdma_mask = swdma, \ @@ -245,6 +245,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) .init_chipset = init_chipset_amd74xx, \ .init_hwif = init_hwif_amd74xx, \ .enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \ + .port_ops = &amd_port_ops, \ .host_flags = IDE_HFLAGS_AMD, \ .pio_mask = ATA_PIO5, \ .swdma_mask = ATA_SWDMA2, \ diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index 7e037c880cb0..8b637181681a 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -130,37 +130,26 @@ static u8 __devinit atiixp_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA40; } -/** - * init_hwif_atiixp - fill in the hwif for the ATIIXP - * @hwif: IDE interface - * - * Set up the ide_hwif_t for the ATIIXP interface according to the - * capabilities of the hardware. - */ - -static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &atiixp_set_pio_mode; - hwif->set_dma_mode = &atiixp_set_dma_mode; - - hwif->cable_detect = atiixp_cable_detect; -} +static const struct ide_port_ops atiixp_port_ops = { + .set_pio_mode = atiixp_set_pio_mode, + .set_dma_mode = atiixp_set_dma_mode, + .cable_detect = atiixp_cable_detect, +}; static const struct ide_port_info atiixp_pci_info[] __devinitdata = { { /* 0 */ .name = "ATIIXP", - .init_hwif = init_hwif_atiixp, .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}}, - .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE, + .port_ops = &atiixp_port_ops, + .host_flags = IDE_HFLAG_LEGACY_IRQS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, },{ /* 1 */ .name = "SB600_PATA", - .init_hwif = init_hwif_atiixp, .enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}}, - .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS | - IDE_HFLAG_BOOTABLE, + .port_ops = &atiixp_port_ops, + .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index ec667982809c..fa3f5214d52e 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -4,7 +4,7 @@ /* * Original authors: abramov@cecmow.enet.dec.com (Igor Abramov) - * mlord@pobox.com (Mark Lord) + * mlord@pobox.com (Mark Lord) * * See linux/MAINTAINERS for address of current maintainer. * @@ -98,7 +98,7 @@ #define CMD640_PREFETCH_MASKS 1 -//#define CMD640_DUMP_REGS +/*#define CMD640_DUMP_REGS */ #include <linux/types.h> #include <linux/kernel.h> @@ -109,10 +109,9 @@ #include <asm/io.h> -/* - * This flag is set in ide.c by the parameter: ide0=cmd640_vlb - */ -int cmd640_vlb = 0; +#define DRV_NAME "cmd640" + +static int cmd640_vlb; /* * CMD640 specific registers definition. @@ -185,7 +184,6 @@ static DEFINE_SPINLOCK(cmd640_lock); * These are initialized to point at the devices we control */ static ide_hwif_t *cmd_hwif0, *cmd_hwif1; -static ide_drive_t *cmd_drives[4]; /* * Interface to access cmd640x registers @@ -207,13 +205,13 @@ static unsigned int cmd640_chip_version; /* PCI method 1 access */ -static void put_cmd640_reg_pci1 (u16 reg, u8 val) +static void put_cmd640_reg_pci1(u16 reg, u8 val) { outl_p((reg & 0xfc) | cmd640_key, 0xcf8); outb_p(val, (reg & 3) | 0xcfc); } -static u8 get_cmd640_reg_pci1 (u16 reg) +static u8 get_cmd640_reg_pci1(u16 reg) { outl_p((reg & 0xfc) | cmd640_key, 0xcf8); return inb_p((reg & 3) | 0xcfc); @@ -221,14 +219,14 @@ static u8 get_cmd640_reg_pci1 (u16 reg) /* PCI method 2 access (from CMD datasheet) */ -static void put_cmd640_reg_pci2 (u16 reg, u8 val) +static void put_cmd640_reg_pci2(u16 reg, u8 val) { outb_p(0x10, 0xcf8); outb_p(val, cmd640_key + reg); outb_p(0, 0xcf8); } -static u8 get_cmd640_reg_pci2 (u16 reg) +static u8 get_cmd640_reg_pci2(u16 reg) { u8 b; @@ -240,13 +238,13 @@ static u8 get_cmd640_reg_pci2 (u16 reg) /* VLB access */ -static void put_cmd640_reg_vlb (u16 reg, u8 val) +static void put_cmd640_reg_vlb(u16 reg, u8 val) { outb_p(reg, cmd640_key); outb_p(val, cmd640_key + 4); } -static u8 get_cmd640_reg_vlb (u16 reg) +static u8 get_cmd640_reg_vlb(u16 reg) { outb_p(reg, cmd640_key); return inb_p(cmd640_key + 4); @@ -268,11 +266,11 @@ static void put_cmd640_reg(u16 reg, u8 val) unsigned long flags; spin_lock_irqsave(&cmd640_lock, flags); - __put_cmd640_reg(reg,val); + __put_cmd640_reg(reg, val); spin_unlock_irqrestore(&cmd640_lock, flags); } -static int __init match_pci_cmd640_device (void) +static int __init match_pci_cmd640_device(void) { const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06}; unsigned int i; @@ -292,7 +290,7 @@ static int __init match_pci_cmd640_device (void) /* * Probe for CMD640x -- pci method 1 */ -static int __init probe_for_cmd640_pci1 (void) +static int __init probe_for_cmd640_pci1(void) { __get_cmd640_reg = get_cmd640_reg_pci1; __put_cmd640_reg = put_cmd640_reg_pci1; @@ -308,7 +306,7 @@ static int __init probe_for_cmd640_pci1 (void) /* * Probe for CMD640x -- pci method 2 */ -static int __init probe_for_cmd640_pci2 (void) +static int __init probe_for_cmd640_pci2(void) { __get_cmd640_reg = get_cmd640_reg_pci2; __put_cmd640_reg = put_cmd640_reg_pci2; @@ -322,7 +320,7 @@ static int __init probe_for_cmd640_pci2 (void) /* * Probe for CMD640x -- vlb */ -static int __init probe_for_cmd640_vlb (void) +static int __init probe_for_cmd640_vlb(void) { u8 b; @@ -343,7 +341,7 @@ static int __init probe_for_cmd640_vlb (void) * Returns 1 if an IDE interface/drive exists at 0x170, * Returns 0 otherwise. */ -static int __init secondary_port_responding (void) +static int __init secondary_port_responding(void) { unsigned long flags; @@ -367,7 +365,7 @@ static int __init secondary_port_responding (void) /* * Dump out all cmd640 registers. May be called from ide.c */ -static void cmd640_dump_regs (void) +static void cmd640_dump_regs(void) { unsigned int reg = cmd640_vlb ? 0x50 : 0x00; @@ -382,13 +380,13 @@ static void cmd640_dump_regs (void) } #endif +#ifndef CONFIG_BLK_DEV_CMD640_ENHANCED /* * Check whether prefetch is on for a drive, * and initialize the unmask flags for safe operation. */ -static void __init check_prefetch (unsigned int index) +static void __init check_prefetch(ide_drive_t *drive, unsigned int index) { - ide_drive_t *drive = cmd_drives[index]; u8 b = get_cmd640_reg(prefetch_regs[index]); if (b & prefetch_masks[index]) { /* is prefetch off? */ @@ -403,39 +401,12 @@ static void __init check_prefetch (unsigned int index) drive->no_io_32bit = 0; } } - -/* - * Figure out which devices we control - */ -static void __init setup_device_ptrs (void) -{ - unsigned int i; - - cmd_hwif0 = &ide_hwifs[0]; /* default, if not found below */ - cmd_hwif1 = &ide_hwifs[1]; /* default, if not found below */ - for (i = 0; i < MAX_HWIFS; i++) { - ide_hwif_t *hwif = &ide_hwifs[i]; - if (hwif->chipset == ide_unknown || hwif->chipset == ide_forced) { - if (hwif->io_ports[IDE_DATA_OFFSET] == 0x1f0) - cmd_hwif0 = hwif; - else if (hwif->io_ports[IDE_DATA_OFFSET] == 0x170) - cmd_hwif1 = hwif; - } - } - cmd_drives[0] = &cmd_hwif0->drives[0]; - cmd_drives[1] = &cmd_hwif0->drives[1]; - cmd_drives[2] = &cmd_hwif1->drives[0]; - cmd_drives[3] = &cmd_hwif1->drives[1]; -} - -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - +#else /* * Sets prefetch mode for a drive. */ -static void set_prefetch_mode (unsigned int index, int mode) +static void set_prefetch_mode(ide_drive_t *drive, unsigned int index, int mode) { - ide_drive_t *drive = cmd_drives[index]; unsigned long flags; int reg = prefetch_regs[index]; u8 b; @@ -462,7 +433,7 @@ static void set_prefetch_mode (unsigned int index, int mode) /* * Dump out current drive clocks settings */ -static void display_clocks (unsigned int index) +static void display_clocks(unsigned int index) { u8 active_count, recovery_count; @@ -481,44 +452,16 @@ static void display_clocks (unsigned int index) * Pack active and recovery counts into single byte representation * used by controller */ -static inline u8 pack_nibbles (u8 upper, u8 lower) +static inline u8 pack_nibbles(u8 upper, u8 lower) { return ((upper & 0x0f) << 4) | (lower & 0x0f); } /* - * This routine retrieves the initial drive timings from the chipset. - */ -static void __init retrieve_drive_counts (unsigned int index) -{ - u8 b; - - /* - * Get the internal setup timing, and convert to clock count - */ - b = get_cmd640_reg(arttim_regs[index]) & ~0x3f; - switch (b) { - case 0x00: b = 4; break; - case 0x80: b = 3; break; - case 0x40: b = 2; break; - default: b = 5; break; - } - setup_counts[index] = b; - - /* - * Get the active/recovery counts - */ - b = get_cmd640_reg(drwtim_regs[index]); - active_counts[index] = (b >> 4) ? (b >> 4) : 0x10; - recovery_counts[index] = (b & 0x0f) ? (b & 0x0f) : 0x10; -} - - -/* * This routine writes the prepared setup/active/recovery counts * for a drive into the cmd640 chipset registers to active them. */ -static void program_drive_counts (unsigned int index) +static void program_drive_counts(ide_drive_t *drive, unsigned int index) { unsigned long flags; u8 setup_count = setup_counts[index]; @@ -532,8 +475,11 @@ static void program_drive_counts (unsigned int index) * so we merge the timings, using the slowest value for each timing. */ if (index > 1) { - unsigned int mate; - if (cmd_drives[mate = index ^ 1]->present) { + ide_hwif_t *hwif = drive->hwif; + ide_drive_t *peer = &hwif->drives[!drive->select.b.unit]; + unsigned int mate = index ^ 1; + + if (peer->present) { if (setup_count < setup_counts[mate]) setup_count = setup_counts[mate]; if (active_count < active_counts[mate]) @@ -547,11 +493,11 @@ static void program_drive_counts (unsigned int index) * Convert setup_count to internal chipset representation */ switch (setup_count) { - case 4: setup_count = 0x00; break; - case 3: setup_count = 0x80; break; - case 1: - case 2: setup_count = 0x40; break; - default: setup_count = 0xc0; /* case 5 */ + case 4: setup_count = 0x00; break; + case 3: setup_count = 0x80; break; + case 1: + case 2: setup_count = 0x40; break; + default: setup_count = 0xc0; /* case 5 */ } /* @@ -572,11 +518,17 @@ static void program_drive_counts (unsigned int index) /* * Set a specific pio_mode for a drive */ -static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle_time) +static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, + u8 pio_mode, unsigned int cycle_time) { int setup_time, active_time, recovery_time, clock_time; u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count; - int bus_speed = system_bus_clock(); + int bus_speed; + + if (cmd640_vlb) + bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; + else + bus_speed = ide_pci_clk ? ide_pci_clk : 33; if (pio_mode > 5) pio_mode = 5; @@ -584,15 +536,15 @@ static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle active_time = ide_pio_timings[pio_mode].active_time; recovery_time = cycle_time - (setup_time + active_time); clock_time = 1000 / bus_speed; - cycle_count = (cycle_time + clock_time - 1) / clock_time; + cycle_count = DIV_ROUND_UP(cycle_time, clock_time); - setup_count = (setup_time + clock_time - 1) / clock_time; + setup_count = DIV_ROUND_UP(setup_time, clock_time); - active_count = (active_time + clock_time - 1) / clock_time; + active_count = DIV_ROUND_UP(active_time, clock_time); if (active_count < 2) active_count = 2; /* minimum allowed by cmd640 */ - recovery_count = (recovery_time + clock_time - 1) / clock_time; + recovery_count = DIV_ROUND_UP(recovery_time, clock_time); recovery_count2 = cycle_count - (setup_count + active_count); if (recovery_count2 > recovery_count) recovery_count = recovery_count2; @@ -621,7 +573,7 @@ static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle * 1) this is the wrong place to do it (proper is do_special() in ide.c) * 2) in practice this is rarely, if ever, necessary */ - program_drive_counts (index); + program_drive_counts(drive, index); } static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) @@ -629,32 +581,26 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) unsigned int index = 0, cycle_time; u8 b; - while (drive != cmd_drives[index]) { - if (++index > 3) { - printk(KERN_ERR "%s: bad news in %s\n", - drive->name, __FUNCTION__); - return; - } - } switch (pio) { - case 6: /* set fast-devsel off */ - case 7: /* set fast-devsel on */ - b = get_cmd640_reg(CNTRL) & ~0x27; - if (pio & 1) - b |= 0x27; - put_cmd640_reg(CNTRL, b); - printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, (pio & 1) ? "en" : "dis"); - return; - - case 8: /* set prefetch off */ - case 9: /* set prefetch on */ - set_prefetch_mode(index, pio & 1); - printk("%s: %sabled cmd640 prefetch\n", drive->name, (pio & 1) ? "en" : "dis"); - return; + case 6: /* set fast-devsel off */ + case 7: /* set fast-devsel on */ + b = get_cmd640_reg(CNTRL) & ~0x27; + if (pio & 1) + b |= 0x27; + put_cmd640_reg(CNTRL, b); + printk("%s: %sabled cmd640 fast host timing (devsel)\n", + drive->name, (pio & 1) ? "en" : "dis"); + return; + case 8: /* set prefetch off */ + case 9: /* set prefetch on */ + set_prefetch_mode(drive, index, pio & 1); + printk("%s: %sabled cmd640 prefetch\n", + drive->name, (pio & 1) ? "en" : "dis"); + return; } cycle_time = ide_pio_cycle_time(drive, pio); - cmd640_set_mode(index, pio, cycle_time); + cmd640_set_mode(drive, index, pio, cycle_time); printk("%s: selected cmd640 PIO mode%d (%dns)", drive->name, pio, cycle_time); @@ -662,6 +608,9 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) display_clocks(index); } +static const struct ide_port_ops cmd640_port_ops = { + .set_pio_mode = cmd640_set_pio_mode, +}; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ static int pci_conf1(void) @@ -703,14 +652,32 @@ static const struct ide_port_info cmd640_port_info __initdata = { .chipset = ide_cmd640, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA | - IDE_HFLAG_NO_AUTOTUNE | IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_ABUSE_FAST_DEVSEL, #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + .port_ops = &cmd640_port_ops, .pio_mask = ATA_PIO5, #endif }; +static int cmd640x_init_one(unsigned long base, unsigned long ctl) +{ + if (!request_region(base, 8, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", + DRV_NAME, base, base + 7); + return -EBUSY; + } + + if (!request_region(ctl, 1, DRV_NAME)) { + printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", + DRV_NAME, ctl); + release_region(base, 8); + return -EBUSY; + } + + return 0; +} + /* * Probe for a cmd640 chipset, and initialize it if found. */ @@ -719,11 +686,12 @@ static int __init cmd640x_init(void) #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED int second_port_toggled = 0; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - int second_port_cmd640 = 0; + int second_port_cmd640 = 0, rc; const char *bus_type, *port2; unsigned int index; u8 b, cfr; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + hw_regs_t hw[2]; if (cmd640_vlb && probe_for_cmd640_vlb()) { bus_type = "VLB"; @@ -758,21 +726,41 @@ static int __init cmd640x_init(void) cfr = get_cmd640_reg(CFR); cmd640_chip_version = cfr & CFR_DEVREV; if (cmd640_chip_version == 0) { - printk ("ide: bad cmd640 revision: %d\n", cmd640_chip_version); + printk("ide: bad cmd640 revision: %d\n", cmd640_chip_version); return 0; } + rc = cmd640x_init_one(0x1f0, 0x3f6); + if (rc) + return rc; + + rc = cmd640x_init_one(0x170, 0x376); + if (rc) { + release_region(0x3f6, 1); + release_region(0x1f0, 8); + return rc; + } + + memset(&hw, 0, sizeof(hw)); + + ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); + hw[0].irq = 14; + + ide_std_init_ports(&hw[1], 0x170, 0x376); + hw[1].irq = 15; + + printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x" + "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr); + + cmd_hwif0 = ide_find_port(); + /* * Initialize data for primary port */ - setup_device_ptrs (); - printk("%s: buggy cmd640%c interface on %s, config=0x%02x\n", - cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr); -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - - idx[0] = cmd_hwif0->index; + if (cmd_hwif0) { + ide_init_port_hw(cmd_hwif0, &hw[0]); + idx[0] = cmd_hwif0->index; + } /* * Ensure compatibility by always using the slowest timings @@ -784,11 +772,13 @@ static int __init cmd640x_init(void) put_cmd640_reg(CMDTIM, 0); put_cmd640_reg(BRST, 0x40); + cmd_hwif1 = ide_find_port(); + /* * Try to enable the secondary interface, if not already enabled */ - if (cmd_hwif1->noprobe || - (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe)) { + if (cmd_hwif1 && + cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) { port2 = "not probed"; } else { b = get_cmd640_reg(CNTRL); @@ -819,14 +809,11 @@ static int __init cmd640x_init(void) /* * Initialize data for secondary cmd640 port, if enabled */ - if (second_port_cmd640) { -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - + if (second_port_cmd640 && cmd_hwif1) { + ide_init_port_hw(cmd_hwif1, &hw[1]); idx[1] = cmd_hwif1->index; } - printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name, + printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n", second_port_cmd640 ? "" : "not ", port2); /* @@ -834,35 +821,34 @@ static int __init cmd640x_init(void) * Do not unnecessarily disturb any prior BIOS setup of these. */ for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) { - ide_drive_t *drive = cmd_drives[index]; -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - if (drive->autotune || ((index > 1) && second_port_toggled)) { - /* - * Reset timing to the slowest speed and turn off prefetch. - * This way, the drive identify code has a better chance. - */ - setup_counts [index] = 4; /* max possible */ - active_counts [index] = 16; /* max possible */ - recovery_counts [index] = 16; /* max possible */ - program_drive_counts (index); - set_prefetch_mode (index, 0); - printk("cmd640: drive%d timings/prefetch cleared\n", index); - } else { - /* - * Record timings/prefetch without changing them. - * This preserves any prior BIOS setup. - */ - retrieve_drive_counts (index); - check_prefetch (index); - printk("cmd640: drive%d timings/prefetch(%s) preserved", - index, drive->no_io_32bit ? "off" : "on"); - display_clocks(index); + ide_drive_t *drive; + + if (index > 1) { + if (cmd_hwif1 == NULL) + continue; + drive = &cmd_hwif1->drives[index & 1]; + } else { + if (cmd_hwif0 == NULL) + continue; + drive = &cmd_hwif0->drives[index & 1]; } + +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + /* + * Reset timing to the slowest speed and turn off prefetch. + * This way, the drive identify code has a better chance. + */ + setup_counts [index] = 4; /* max possible */ + active_counts [index] = 16; /* max possible */ + recovery_counts [index] = 16; /* max possible */ + program_drive_counts(drive, index); + set_prefetch_mode(drive, index, 0); + printk("cmd640: drive%d timings/prefetch cleared\n", index); #else /* * Set the drive unmask flags to match the prefetch setting */ - check_prefetch (index); + check_prefetch(drive, index); printk("cmd640: drive%d timings/prefetch(%s) preserved\n", index, drive->no_io_32bit ? "off" : "on"); #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index edabe6299efd..ca4774aa27ee 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -68,8 +68,8 @@ static u8 quantize_timing(int timing, int quant) */ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time) { - struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - int clock_time = 1000 / system_bus_clock(); + struct pci_dev *dev = to_pci_dev(drive->hwif->dev); + int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33); u8 cycle_count, active_count, recovery_count, drwtim; static const u8 recovery_values[] = {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; @@ -128,7 +128,7 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) ide_pio_timings[pio].active_time); setup_count = quantize_timing(ide_pio_timings[pio].setup_time, - 1000 / system_bus_clock()); + 1000 / (ide_pci_clk ? ide_pci_clk : 33)); /* * The primary channel has individual address setup timing registers @@ -223,7 +223,7 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) (void) pci_write_config_byte(dev, pciU, regU); } -static int cmd648_ide_dma_end (ide_drive_t *drive) +static int cmd648_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long base = hwif->dma_base - (hwif->channel * 8); @@ -239,7 +239,7 @@ static int cmd648_ide_dma_end (ide_drive_t *drive) return err; } -static int cmd64x_ide_dma_end (ide_drive_t *drive) +static int cmd64x_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -256,7 +256,7 @@ static int cmd64x_ide_dma_end (ide_drive_t *drive) return err; } -static int cmd648_ide_dma_test_irq (ide_drive_t *drive) +static int cmd648_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long base = hwif->dma_base - (hwif->channel * 8); @@ -279,7 +279,7 @@ static int cmd648_ide_dma_test_irq (ide_drive_t *drive) return 0; } -static int cmd64x_ide_dma_test_irq (ide_drive_t *drive) +static int cmd64x_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -310,7 +310,7 @@ static int cmd64x_ide_dma_test_irq (ide_drive_t *drive) * event order for DMA transfers. */ -static int cmd646_1_ide_dma_end (ide_drive_t *drive) +static int cmd646_1_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); u8 dma_stat = 0, dma_cmd = 0; @@ -370,7 +370,7 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha return 0; } -static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif) +static u8 __devinit cmd64x_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01; @@ -385,91 +385,85 @@ static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif) } } -static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - hwif->set_pio_mode = &cmd64x_set_pio_mode; - hwif->set_dma_mode = &cmd64x_set_dma_mode; - - hwif->cable_detect = ata66_cmd64x; +static const struct ide_port_ops cmd64x_port_ops = { + .set_pio_mode = cmd64x_set_pio_mode, + .set_dma_mode = cmd64x_set_dma_mode, + .cable_detect = cmd64x_cable_detect, +}; - if (!hwif->dma_base) - return; +static const struct ide_dma_ops cmd64x_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = cmd64x_dma_end, + .dma_test_irq = cmd64x_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; - /* - * UltraDMA only supported on PCI646U and PCI646U2, which - * correspond to revisions 0x03, 0x05 and 0x07 respectively. - * Actually, although the CMD tech support people won't - * tell me the details, the 0x03 revision cannot support - * UDMA correctly without hardware modifications, and even - * then it only works with Quantum disks due to some - * hold time assumptions in the 646U part which are fixed - * in the 646U2. - * - * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. - */ - if (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 5) - hwif->ultra_mask = 0x00; +static const struct ide_dma_ops cmd646_rev1_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = cmd646_1_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; - switch (dev->device) { - case PCI_DEVICE_ID_CMD_648: - case PCI_DEVICE_ID_CMD_649: - alt_irq_bits: - hwif->ide_dma_end = &cmd648_ide_dma_end; - hwif->ide_dma_test_irq = &cmd648_ide_dma_test_irq; - break; - case PCI_DEVICE_ID_CMD_646: - if (dev->revision == 0x01) { - hwif->ide_dma_end = &cmd646_1_ide_dma_end; - break; - } else if (dev->revision >= 0x03) - goto alt_irq_bits; - /* fall thru */ - default: - hwif->ide_dma_end = &cmd64x_ide_dma_end; - hwif->ide_dma_test_irq = &cmd64x_ide_dma_test_irq; - break; - } -} +static const struct ide_dma_ops cmd648_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = cmd648_dma_end, + .dma_test_irq = cmd648_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; static const struct ide_port_info cmd64x_chipsets[] __devinitdata = { { /* 0 */ .name = "CMD643", .init_chipset = init_chipset_cmd64x, - .init_hwif = init_hwif_cmd64x, .enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}}, + .port_ops = &cmd64x_port_ops, + .dma_ops = &cmd64x_dma_ops, .host_flags = IDE_HFLAG_CLEAR_SIMPLEX | - IDE_HFLAG_ABUSE_PREFETCH | - IDE_HFLAG_BOOTABLE, + IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, .udma_mask = 0x00, /* no udma */ },{ /* 1 */ .name = "CMD646", .init_chipset = init_chipset_cmd64x, - .init_hwif = init_hwif_cmd64x, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, .chipset = ide_cmd646, - .host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE, + .port_ops = &cmd64x_port_ops, + .dma_ops = &cmd648_dma_ops, + .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, },{ /* 2 */ .name = "CMD648", .init_chipset = init_chipset_cmd64x, - .init_hwif = init_hwif_cmd64x, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, - .host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE, + .port_ops = &cmd64x_port_ops, + .dma_ops = &cmd648_dma_ops, + .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, },{ /* 3 */ .name = "CMD649", .init_chipset = init_chipset_cmd64x, - .init_hwif = init_hwif_cmd64x, .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}}, - .host_flags = IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_BOOTABLE, + .port_ops = &cmd64x_port_ops, + .dma_ops = &cmd648_dma_ops, + .host_flags = IDE_HFLAG_ABUSE_PREFETCH, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -483,12 +477,35 @@ static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_devic d = cmd64x_chipsets[idx]; - /* - * The original PCI0646 didn't have the primary channel enable bit, - * it appeared starting with PCI0646U (i.e. revision ID 3). - */ - if (idx == 1 && dev->revision < 3) - d.enablebits[0].reg = 0; + if (idx == 1) { + /* + * UltraDMA only supported on PCI646U and PCI646U2, which + * correspond to revisions 0x03, 0x05 and 0x07 respectively. + * Actually, although the CMD tech support people won't + * tell me the details, the 0x03 revision cannot support + * UDMA correctly without hardware modifications, and even + * then it only works with Quantum disks due to some + * hold time assumptions in the 646U part which are fixed + * in the 646U2. + * + * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. + */ + if (dev->revision < 5) { + d.udma_mask = 0x00; + /* + * The original PCI0646 didn't have the primary + * channel enable bit, it appeared starting with + * PCI0646U (i.e. revision ID 3). + */ + if (dev->revision < 3) { + d.enablebits[0].reg = 0; + if (dev->revision == 1) + d.dma_ops = &cmd646_rev1_dma_ops; + else + d.dma_ops = &cmd64x_dma_ops; + } + } + } return ide_setup_pci_device(dev, &d); } diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index 1c163e4ef03f..17669a434438 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -103,27 +103,32 @@ static void cs5520_dma_host_set(ide_drive_t *drive, int on) ide_dma_host_set(drive, on); } -static void __devinit init_hwif_cs5520(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &cs5520_set_pio_mode; - hwif->set_dma_mode = &cs5520_set_dma_mode; - - if (hwif->dma_base == 0) - return; +static const struct ide_port_ops cs5520_port_ops = { + .set_pio_mode = cs5520_set_pio_mode, + .set_dma_mode = cs5520_set_dma_mode, +}; - hwif->dma_host_set = &cs5520_dma_host_set; -} +static const struct ide_dma_ops cs5520_dma_ops = { + .dma_host_set = cs5520_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = __ide_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; #define DECLARE_CS_DEV(name_str) \ { \ .name = name_str, \ - .init_hwif = init_hwif_cs5520, \ + .port_ops = &cs5520_port_ops, \ + .dma_ops = &cs5520_dma_ops, \ .host_flags = IDE_HFLAG_ISA_PORTS | \ IDE_HFLAG_CS5520 | \ IDE_HFLAG_VDMA | \ IDE_HFLAG_NO_ATAPI_DMA | \ - IDE_HFLAG_ABUSE_SET_DMA_MODE |\ - IDE_HFLAG_BOOTABLE, \ + IDE_HFLAG_ABUSE_SET_DMA_MODE, \ .pio_mask = ATA_PIO4, \ } diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index 941a1344820b..f5534c1ff349 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -228,29 +228,27 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif) unsigned long basereg; u32 d0_timings; - hwif->set_pio_mode = &cs5530_set_pio_mode; - hwif->set_dma_mode = &cs5530_set_dma_mode; - basereg = CS5530_BASEREG(hwif); d0_timings = inl(basereg + 0); if (CS5530_BAD_PIO(d0_timings)) outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0); if (CS5530_BAD_PIO(inl(basereg + 8))) outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8); - - if (hwif->dma_base == 0) - return; - - hwif->udma_filter = cs5530_udma_filter; } +static const struct ide_port_ops cs5530_port_ops = { + .set_pio_mode = cs5530_set_pio_mode, + .set_dma_mode = cs5530_set_dma_mode, + .udma_filter = cs5530_udma_filter, +}; + static const struct ide_port_info cs5530_chipset __devinitdata = { .name = "CS5530", .init_chipset = init_chipset_cs5530, .init_hwif = init_hwif_cs5530, + .port_ops = &cs5530_port_ops, .host_flags = IDE_HFLAG_SERIALIZE | - IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_BOOTABLE, + IDE_HFLAG_POST_SET_MODE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index d7b5ea992e94..99fe91a191b8 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -166,27 +166,17 @@ static u8 __devinit cs5535_cable_detect(ide_hwif_t *hwif) return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; } -/**** - * init_hwif_cs5535 - Initialize one ide cannel - * @hwif: Channel descriptor - * - * This gets invoked by the IDE driver once for each channel. It - * performs channel-specific pre-initialization before drive probing. - * - */ -static void __devinit init_hwif_cs5535(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &cs5535_set_pio_mode; - hwif->set_dma_mode = &cs5535_set_dma_mode; - - hwif->cable_detect = cs5535_cable_detect; -} +static const struct ide_port_ops cs5535_port_ops = { + .set_pio_mode = cs5535_set_pio_mode, + .set_dma_mode = cs5535_set_dma_mode, + .cable_detect = cs5535_cable_detect, +}; static const struct ide_port_info cs5535_chipset __devinitdata = { .name = "CS5535", - .init_hwif = init_hwif_cs5535, + .port_ops = &cs5535_port_ops, .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_BOOTABLE, + IDE_HFLAG_ABUSE_SET_DMA_MODE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 724cbacf4e5b..8c534afcb6c8 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -6,7 +6,7 @@ * * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards. * Writing the driver was quite simple, since most of the job is - * done by the generic pci-ide support. + * done by the generic pci-ide support. * The hard part was finding the CY82C693's datasheet on Cypress's * web page :-(. But Altavista solved this problem :-). * @@ -15,12 +15,10 @@ * - I recently got a 16.8G IBM DTTA, so I was able to test it with * a large and fast disk - the results look great, so I'd say the * driver is working fine :-) - * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA - * - this is my first linux driver, so there's probably a lot of room + * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA + * - this is my first linux driver, so there's probably a lot of room * for optimizations and bug fixing, so feel free to do it. - * - use idebus=xx parameter to set PCI bus speed - needed to calc - * timings for PIO modes (default will be 40) - * - if using PIO mode it's a good idea to set the PIO mode and + * - if using PIO mode it's a good idea to set the PIO mode and * 32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda * - I had some problems with my IBM DHEA with PIO modes < 2 * (lost interrupts) ????? @@ -110,11 +108,11 @@ typedef struct pio_clocks_s { * calc clocks using bus_speed * returns (rounded up) time in bus clocks for time in ns */ -static int calc_clk (int time, int bus_speed) +static int calc_clk(int time, int bus_speed) { int clocks; - clocks = (time*bus_speed+999)/1000 -1; + clocks = (time*bus_speed+999)/1000 - 1; if (clocks < 0) clocks = 0; @@ -132,11 +130,11 @@ static int calc_clk (int time, int bus_speed) * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used * for mode 3 and 4 drives 8 and 16-bit timings are the same * - */ -static void compute_clocks (u8 pio, pio_clocks_t *p_pclk) + */ +static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) { int clk1, clk2; - int bus_speed = system_bus_clock(); /* get speed of PCI bus */ + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; /* we don't check against CY82C693's min and max speed, * so you can play with the idebus=xx parameter @@ -158,7 +156,7 @@ static void compute_clocks (u8 pio, pio_clocks_t *p_pclk) clk1 = (clk1<<4)|clk2; /* combine active and recovery clocks */ /* note: we use the same values for 16bit IOR and IOW - * those are all the same, since I don't have other + * those are all the same, since I don't have other * timings than those from ide-lib.c */ @@ -186,7 +184,7 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) outb(index, CY82_INDEX_PORT); data = inb(CY82_DATA_PORT); - printk (KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n", + printk(KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n", drive->name, HWIF(drive)->channel, drive->select.b.unit, (data&0x3), ((data>>2)&1)); #endif /* CY82C693_DEBUG_LOGS */ @@ -202,7 +200,7 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) mode & 3, single); #endif /* CY82C693_DEBUG_INFO */ - /* + /* * note: below we set the value for Bus Master IDE TimeOut Register * I'm not absolutly sure what this does, but it solved my problem * with IDE DMA and sound, so I now can play sound and work with @@ -216,8 +214,8 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT); outb(data, CY82_DATA_PORT); -#if CY82C693_DEBUG_INFO - printk (KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n", +#if CY82C693_DEBUG_INFO + printk(KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n", drive->name, data); #endif /* CY82C693_DEBUG_INFO */ } @@ -242,14 +240,14 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) #if CY82C693_DEBUG_LOGS /* for debug let's show the register values */ - - if (drive->select.b.unit == 0) { + + if (drive->select.b.unit == 0) { /* - * get master drive registers + * get master drive registers * address setup control register * is 32 bit !!! - */ - pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); + */ + pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= 0x0F; /* now let's get the remaining registers */ @@ -261,7 +259,7 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) * set slave drive registers * address setup control register * is 32 bit !!! - */ + */ pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= 0xF0; @@ -288,9 +286,9 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) * set master drive * address setup control register * is 32 bit !!! - */ + */ pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); - + addrCtrl &= (~0xF); addrCtrl |= (unsigned int)pclk.address_time; pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); @@ -299,14 +297,14 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r); pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w); pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8); - + addrCtrl &= 0xF; } else { /* * set slave drive * address setup control register * is 32 bit !!! - */ + */ pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= (~0xF0); @@ -320,7 +318,7 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) addrCtrl >>= 4; addrCtrl &= 0xF; - } + } #if CY82C693_DEBUG_INFO printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to " @@ -340,41 +338,41 @@ static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const c #ifdef CY82C693_SETDMA_CLOCK u8 data = 0; -#endif /* CY82C693_SETDMA_CLOCK */ +#endif /* CY82C693_SETDMA_CLOCK */ /* write info about this verion of the driver */ printk(KERN_INFO CY82_VERSION "\n"); #ifdef CY82C693_SETDMA_CLOCK /* okay let's set the DMA clock speed */ - - outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); - data = inb(CY82_DATA_PORT); + + outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); + data = inb(CY82_DATA_PORT); #if CY82C693_DEBUG_INFO printk(KERN_INFO "%s: Peripheral Configuration Register: 0x%X\n", name, data); #endif /* CY82C693_DEBUG_INFO */ - /* + /* * for some reason sometimes the DMA controller * speed is set to ATCLK/2 ???? - we fix this here - * + * * note: i don't know what causes this strange behaviour, * but even changing the dma speed doesn't solve it :-( - * the ide performance is still only half the normal speed - * + * the ide performance is still only half the normal speed + * * if anybody knows what goes wrong with my machine, please * let me know - ASK - */ + */ data |= 0x03; - outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); - outb(data, CY82_DATA_PORT); + outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT); + outb(data, CY82_DATA_PORT); #if CY82C693_DEBUG_INFO - printk (KERN_INFO "%s: New Peripheral Configuration Register: 0x%X\n", + printk(KERN_INFO "%s: New Peripheral Configuration Register: 0x%X\n", name, data); #endif /* CY82C693_DEBUG_INFO */ @@ -382,15 +380,6 @@ static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const c return 0; } -/* - * the init function - called for each ide channel once - */ -static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &cy82c693_set_pio_mode; - hwif->set_dma_mode = &cy82c693_set_dma_mode; -} - static void __devinit init_iops_cy82c693(ide_hwif_t *hwif) { static ide_hwif_t *primary; @@ -404,14 +393,18 @@ static void __devinit init_iops_cy82c693(ide_hwif_t *hwif) } } +static const struct ide_port_ops cy82c693_port_ops = { + .set_pio_mode = cy82c693_set_pio_mode, + .set_dma_mode = cy82c693_set_dma_mode, +}; + static const struct ide_port_info cy82c693_chipset __devinitdata = { .name = "CY82C693", .init_chipset = init_chipset_cy82c693, .init_iops = init_iops_cy82c693, - .init_hwif = init_hwif_cy82c693, + .port_ops = &cy82c693_port_ops, .chipset = ide_cy82c693, - .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_CY82C693 | - IDE_HFLAG_BOOTABLE, + .host_flags = IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, @@ -424,7 +417,7 @@ static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_dev /* CY82C693 is more than only a IDE controller. Function 1 is primary IDE channel, function 2 - secondary. */ - if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && + if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && PCI_FUNC(dev->devfn) == 1) { dev2 = pci_get_slot(dev->bus, dev->devfn + 1); ret = ide_setup_pci_devices(dev, dev2, &cy82c693_chipset); diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 3f9cd64c26a6..9d77fd650a0a 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -43,6 +43,10 @@ static const u8 setup[] = { 0x00, 0x00, 0x00, 0x00, 0xa4, 0x83, 0x02, 0x13, }; +static const struct ide_port_ops delkin_cb_port_ops = { + .quirkproc = ide_undecoded_slave, +}; + static int __devinit delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) { @@ -71,26 +75,20 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) if (setup[i]) outb(setup[i], base + i); } - pci_release_regions(dev); /* IDE layer handles regions itself */ memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base + 0x10, base + 0x1e); hw.irq = dev->irq; hw.chipset = ide_pci; /* this enables IRQ sharing */ - hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]); + hwif = ide_find_port(); if (hwif == NULL) goto out_disable; i = hwif->index; - if (hwif->present) - ide_unregister(i, 0, 0); - else if (!hwif->hold) - ide_init_port_data(hwif, i); - ide_init_port_hw(hwif, &hw); - hwif->quirkproc = &ide_undecoded_slave; + hwif->port_ops = &delkin_cb_port_ops; idx[0] = i; @@ -110,6 +108,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) out_disable: printk(KERN_ERR "delkin_cb: no IDE devices found\n"); + pci_release_regions(dev); pci_disable_device(dev); return -ENODEV; } @@ -119,9 +118,9 @@ delkin_cb_remove (struct pci_dev *dev) { ide_hwif_t *hwif = pci_get_drvdata(dev); - if (hwif) - ide_unregister(hwif->index, 0, 0); + ide_unregister(hwif); + pci_release_regions(dev); pci_disable_device(dev); } diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index 7fd83a9d4dee..041720e22762 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -38,8 +38,7 @@ MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE st { \ .name = name_str, \ .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | \ - extra_flags | \ - IDE_HFLAG_BOOTABLE, \ + extra_flags, \ .swdma_mask = ATA_SWDMA2, \ .mwdma_mask = ATA_MWDMA2, \ .udma_mask = ATA_UDMA6, \ @@ -50,9 +49,8 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = { { /* 1 */ .name = "NS87410", - .enablebits = {{0x43,0x08,0x08}, {0x47,0x08,0x08}}, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | - IDE_HFLAG_BOOTABLE, + .enablebits = { {0x43, 0x08, 0x08}, {0x47, 0x08, 0x08} }, + .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, @@ -99,7 +97,7 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = { * Called when the PCI registration layer (or the IDE initialization) * finds a device matching our IDE device tables. */ - + static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct ide_port_info *d = &generic_chipsets[id->driver_data]; diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c index 9f01da46b016..84c36c117194 100644 --- a/drivers/ide/pci/hpt34x.c +++ b/drivers/ide/pci/hpt34x.c @@ -115,11 +115,10 @@ static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev, const cha return dev->irq; } -static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &hpt34x_set_pio_mode; - hwif->set_dma_mode = &hpt34x_set_mode; -} +static const struct ide_port_ops hpt34x_port_ops = { + .set_pio_mode = hpt34x_set_pio_mode, + .set_dma_mode = hpt34x_set_mode, +}; #define IDE_HFLAGS_HPT34X \ (IDE_HFLAG_NO_ATAPI_DMA | \ @@ -131,16 +130,14 @@ static const struct ide_port_info hpt34x_chipsets[] __devinitdata = { { /* 0 */ .name = "HPT343", .init_chipset = init_chipset_hpt34x, - .init_hwif = init_hwif_hpt34x, - .extra = 16, - .host_flags = IDE_HFLAGS_HPT34X, + .port_ops = &hpt34x_port_ops, + .host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_NON_BOOTABLE, .pio_mask = ATA_PIO5, }, { /* 1 */ .name = "HPT345", .init_chipset = init_chipset_hpt34x, - .init_hwif = init_hwif_hpt34x, - .extra = 16, + .port_ops = &hpt34x_port_ops, .host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_OFF_BOARD, .pio_mask = ATA_PIO5, #ifdef CONFIG_HPT34X_AUTODMA diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 6357bb6269ab..dd3883ace0b8 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -760,7 +760,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask) } } else outb(mask ? (drive->ctl | 2) : (drive->ctl & ~2), - IDE_CONTROL_REG); + hwif->io_ports[IDE_CONTROL_OFFSET]); } /* @@ -776,7 +776,7 @@ static void hpt366_dma_lost_irq(ide_drive_t *drive) pci_read_config_byte(dev, 0x52, &mcr3); pci_read_config_byte(dev, 0x5a, &scr1); printk("%s: (%s) mcr1=0x%02x, mcr3=0x%02x, scr1=0x%02x\n", - drive->name, __FUNCTION__, mcr1, mcr3, scr1); + drive->name, __func__, mcr1, mcr3, scr1); if (scr1 & 0x10) pci_write_config_byte(dev, 0x5a, scr1 & ~0x10); ide_dma_lost_irq(drive); @@ -808,7 +808,7 @@ static void hpt370_irq_timeout(ide_drive_t *drive) hpt370_clear_engine(drive); } -static void hpt370_ide_dma_start(ide_drive_t *drive) +static void hpt370_dma_start(ide_drive_t *drive) { #ifdef HPT_RESET_STATE_ENGINE hpt370_clear_engine(drive); @@ -816,7 +816,7 @@ static void hpt370_ide_dma_start(ide_drive_t *drive) ide_dma_start(drive); } -static int hpt370_ide_dma_end(ide_drive_t *drive) +static int hpt370_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); u8 dma_stat = inb(hwif->dma_status); @@ -838,7 +838,7 @@ static void hpt370_dma_timeout(ide_drive_t *drive) } /* returns 1 if DMA IRQ issued, 0 otherwise */ -static int hpt374_ide_dma_test_irq(ide_drive_t *drive) +static int hpt374_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -858,11 +858,11 @@ static int hpt374_ide_dma_test_irq(ide_drive_t *drive) if (!drive->waiting_for_dma) printk(KERN_WARNING "%s: (%s) called while not waiting\n", - drive->name, __FUNCTION__); + drive->name, __func__); return 0; } -static int hpt374_ide_dma_end(ide_drive_t *drive) +static int hpt374_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -929,64 +929,6 @@ static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq) hpt3xxn_set_clock(HWIF(drive), rq_data_dir(rq) ? 0x23 : 0x21); } -/* - * Set/get power state for a drive. - * NOTE: affects both drives on each channel. - * - * When we turn the power back on, we need to re-initialize things. - */ -#define TRISTATE_BIT 0x8000 - -static int hpt3xx_busproc(ide_drive_t *drive, int state) -{ - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 mcr_addr = hwif->select_data + 2; - u8 resetmask = hwif->channel ? 0x80 : 0x40; - u8 bsr2 = 0; - u16 mcr = 0; - - hwif->bus_state = state; - - /* Grab the status. */ - pci_read_config_word(dev, mcr_addr, &mcr); - pci_read_config_byte(dev, 0x59, &bsr2); - - /* - * Set the state. We don't set it if we don't need to do so. - * Make sure that the drive knows that it has failed if it's off. - */ - switch (state) { - case BUSSTATE_ON: - if (!(bsr2 & resetmask)) - return 0; - hwif->drives[0].failures = hwif->drives[1].failures = 0; - - pci_write_config_byte(dev, 0x59, bsr2 & ~resetmask); - pci_write_config_word(dev, mcr_addr, mcr & ~TRISTATE_BIT); - return 0; - case BUSSTATE_OFF: - if ((bsr2 & resetmask) && !(mcr & TRISTATE_BIT)) - return 0; - mcr &= ~TRISTATE_BIT; - break; - case BUSSTATE_TRISTATE: - if ((bsr2 & resetmask) && (mcr & TRISTATE_BIT)) - return 0; - mcr |= TRISTATE_BIT; - break; - default: - return -EINVAL; - } - - hwif->drives[0].failures = hwif->drives[0].max_failures + 1; - hwif->drives[1].failures = hwif->drives[1].max_failures + 1; - - pci_write_config_word(dev, mcr_addr, mcr); - pci_write_config_byte(dev, 0x59, bsr2 | resetmask); - return 0; -} - /** * hpt37x_calibrate_dpll - calibrate the DPLL * @dev: PCI device @@ -1329,18 +1271,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) /* Cache the channel's MISC. control registers' offset */ hwif->select_data = hwif->channel ? 0x54 : 0x50; - hwif->set_pio_mode = &hpt3xx_set_pio_mode; - hwif->set_dma_mode = &hpt3xx_set_mode; - - hwif->quirkproc = &hpt3xx_quirkproc; - hwif->maskproc = &hpt3xx_maskproc; - hwif->busproc = &hpt3xx_busproc; - - hwif->udma_filter = &hpt3xx_udma_filter; - hwif->mdma_filter = &hpt3xx_mdma_filter; - - hwif->cable_detect = hpt3xx_cable_detect; - /* * HPT3xxN chips have some complications: * @@ -1382,29 +1312,19 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) if (new_mcr != old_mcr) pci_write_config_byte(dev, hwif->select_data + 1, new_mcr); - - if (hwif->dma_base == 0) - return; - - if (chip_type >= HPT374) { - hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq; - hwif->ide_dma_end = &hpt374_ide_dma_end; - } else if (chip_type >= HPT370) { - hwif->dma_start = &hpt370_ide_dma_start; - hwif->ide_dma_end = &hpt370_ide_dma_end; - hwif->dma_timeout = &hpt370_dma_timeout; - } else - hwif->dma_lost_irq = &hpt366_dma_lost_irq; } -static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase) +static int __devinit init_dma_hpt366(ide_hwif_t *hwif, + const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 masterdma = 0, slavedma = 0; - u8 dma_new = 0, dma_old = 0; - unsigned long flags; + unsigned long flags, base = ide_pci_dma_base(hwif, d); + u8 dma_old, dma_new, masterdma = 0, slavedma = 0; + + if (base == 0 || ide_pci_set_master(dev, d->name) < 0) + return -1; - dma_old = inb(dmabase + 2); + dma_old = inb(base + 2); local_irq_save(flags); @@ -1415,11 +1335,21 @@ static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase) if (masterdma & 0x30) dma_new |= 0x20; if ( slavedma & 0x30) dma_new |= 0x40; if (dma_new != dma_old) - outb(dma_new, dmabase + 2); + outb(dma_new, base + 2); local_irq_restore(flags); - ide_setup_dma(hwif, dmabase); + printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", + hwif->name, base, base + 7); + + hwif->extra_base = base + (hwif->channel ? 8 : 16); + + if (ide_allocate_dma_engine(hwif)) + return -1; + + ide_setup_dma(hwif, base); + + return 0; } static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2) @@ -1475,6 +1405,49 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2) IDE_HFLAG_ABUSE_SET_DMA_MODE | \ IDE_HFLAG_OFF_BOARD) +static const struct ide_port_ops hpt3xx_port_ops = { + .set_pio_mode = hpt3xx_set_pio_mode, + .set_dma_mode = hpt3xx_set_mode, + .quirkproc = hpt3xx_quirkproc, + .maskproc = hpt3xx_maskproc, + .mdma_filter = hpt3xx_mdma_filter, + .udma_filter = hpt3xx_udma_filter, + .cable_detect = hpt3xx_cable_detect, +}; + +static const struct ide_dma_ops hpt37x_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = hpt374_dma_end, + .dma_test_irq = hpt374_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + +static const struct ide_dma_ops hpt370_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = hpt370_dma_start, + .dma_end = hpt370_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = hpt370_dma_timeout, +}; + +static const struct ide_dma_ops hpt36x_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = __ide_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = hpt366_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + static const struct ide_port_info hpt366_chipsets[] __devinitdata = { { /* 0 */ .name = "HPT36x", @@ -1488,7 +1461,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { * Bit 4 is for the primary channel, bit 5 for the secondary. */ .enablebits = {{0x50,0x10,0x10}, {0x54,0x04,0x04}}, - .extra = 240, + .port_ops = &hpt3xx_port_ops, + .dma_ops = &hpt36x_dma_ops, .host_flags = IDE_HFLAGS_HPT3XX | IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -1498,7 +1472,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, - .extra = 240, + .port_ops = &hpt3xx_port_ops, + .dma_ops = &hpt37x_dma_ops, .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -1508,7 +1483,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, - .extra = 240, + .port_ops = &hpt3xx_port_ops, + .dma_ops = &hpt37x_dma_ops, .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -1518,7 +1494,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, - .extra = 240, + .port_ops = &hpt3xx_port_ops, + .dma_ops = &hpt37x_dma_ops, .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -1529,7 +1506,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .init_dma = init_dma_hpt366, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, .udma_mask = ATA_UDMA5, - .extra = 240, + .port_ops = &hpt3xx_port_ops, + .dma_ops = &hpt370_dma_ops, .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -1539,7 +1517,8 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = { .init_hwif = init_hwif_hpt366, .init_dma = init_dma_hpt366, .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}}, - .extra = 240, + .port_ops = &hpt3xx_port_ops, + .dma_ops = &hpt37x_dma_ops, .host_flags = IDE_HFLAGS_HPT3XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -1616,7 +1595,7 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic hpt374_init(dev, dev2); else { if (hpt36x_init(dev, dev2)) - d.host_flags |= IDE_HFLAG_BOOTABLE; + d.host_flags &= ~IDE_HFLAG_NON_BOOTABLE; } ret = ide_setup_pci_devices(dev, dev2, &d); diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index e3427eaab430..9053c8771e6e 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c @@ -35,7 +35,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) static DEFINE_SPINLOCK(tune_lock); int control = 0; - static const u8 timings[][2]= { + static const u8 timings[][2] = { { 0, 0 }, { 0, 0 }, { 1, 0 }, @@ -105,11 +105,10 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) if (!(reg48 & u_flag)) pci_write_config_byte(dev, 0x48, reg48 | u_flag); - if (speed >= XFER_UDMA_5) { + if (speed >= XFER_UDMA_5) pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag); - } else { + else pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); - } if ((reg4a & a_speed) != u_speed) pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed); @@ -150,29 +149,18 @@ static u8 __devinit it8213_cable_detect(ide_hwif_t *hwif) return (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; } -/** - * init_hwif_it8213 - set up hwif structs - * @hwif: interface to set up - * - * We do the basic set up of the interface structure. - */ - -static void __devinit init_hwif_it8213(ide_hwif_t *hwif) -{ - hwif->set_dma_mode = &it8213_set_dma_mode; - hwif->set_pio_mode = &it8213_set_pio_mode; - - hwif->cable_detect = it8213_cable_detect; -} - +static const struct ide_port_ops it8213_port_ops = { + .set_pio_mode = it8213_set_pio_mode, + .set_dma_mode = it8213_set_dma_mode, + .cable_detect = it8213_cable_detect, +}; #define DECLARE_ITE_DEV(name_str) \ { \ .name = name_str, \ - .init_hwif = init_hwif_it8213, \ - .enablebits = {{0x41,0x80,0x80}}, \ - .host_flags = IDE_HFLAG_SINGLE | \ - IDE_HFLAG_BOOTABLE, \ + .enablebits = { {0x41, 0x80, 0x80} }, \ + .port_ops = &it8213_port_ops, \ + .host_flags = IDE_HFLAG_SINGLE, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ .mwdma_mask = ATA_MWDMA12_ONLY, \ diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 1597f0cc1bf1..a3fd8bc35d9a 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -418,7 +418,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed) } /** - * ata66_it821x - check for 80 pin cable + * it821x_cable_detect - cable detection * @hwif: interface to check * * Check for the presence of an ATA66 capable cable on the @@ -426,7 +426,7 @@ static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed) * the needed logic onboard. */ -static u8 __devinit ata66_it821x(ide_hwif_t *hwif) +static u8 __devinit it821x_cable_detect(ide_hwif_t *hwif) { /* The reference driver also only does disk side */ return ATA_CBL_PATA80; @@ -511,6 +511,11 @@ static void __devinit it821x_quirkproc(ide_drive_t *drive) } +static struct ide_dma_ops it821x_pass_through_dma_ops = { + .dma_start = it821x_dma_start, + .dma_end = it821x_dma_end, +}; + /** * init_hwif_it821x - set up hwif structs * @hwif: interface to set up @@ -523,16 +528,10 @@ static void __devinit it821x_quirkproc(ide_drive_t *drive) static void __devinit init_hwif_it821x(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - struct it821x_dev *idev = kzalloc(sizeof(struct it821x_dev), GFP_KERNEL); + struct it821x_dev **itdevs = (struct it821x_dev **)pci_get_drvdata(dev); + struct it821x_dev *idev = itdevs[hwif->channel]; u8 conf; - hwif->quirkproc = &it821x_quirkproc; - - if (idev == NULL) { - printk(KERN_ERR "it821x: out of memory, falling back to legacy behaviour.\n"); - return; - } - ide_set_hwifdata(hwif, idev); pci_read_config_byte(dev, 0x50, &conf); @@ -567,17 +566,11 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) } if (idev->smart == 0) { - hwif->set_pio_mode = &it821x_set_pio_mode; - hwif->set_dma_mode = &it821x_set_dma_mode; - /* MWDMA/PIO clock switching for pass through mode */ - hwif->dma_start = &it821x_dma_start; - hwif->ide_dma_end = &it821x_dma_end; + hwif->dma_ops = &it821x_pass_through_dma_ops; } else hwif->host_flags |= IDE_HFLAG_NO_SET_MODE; - hwif->cable_detect = ata66_it821x; - if (hwif->dma_base == 0) return; @@ -617,13 +610,20 @@ static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const cha return 0; } +static const struct ide_port_ops it821x_port_ops = { + /* it821x_set_{pio,dma}_mode() are only used in pass-through mode */ + .set_pio_mode = it821x_set_pio_mode, + .set_dma_mode = it821x_set_dma_mode, + .quirkproc = it821x_quirkproc, + .cable_detect = it821x_cable_detect, +}; #define DECLARE_ITE_DEV(name_str) \ { \ .name = name_str, \ .init_chipset = init_chipset_it821x, \ .init_hwif = init_hwif_it821x, \ - .host_flags = IDE_HFLAG_BOOTABLE, \ + .port_ops = &it821x_port_ops, \ .pio_mask = ATA_PIO4, \ } @@ -642,6 +642,22 @@ static const struct ide_port_info it821x_chipsets[] __devinitdata = { static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { + struct it821x_dev *itdevs[2] = { NULL, NULL} , *itdev; + unsigned int i; + + for (i = 0; i < 2; i++) { + itdev = kzalloc(sizeof(*itdev), GFP_KERNEL); + if (itdev == NULL) { + kfree(itdevs[0]); + printk(KERN_ERR "it821x: out of memory\n"); + return -ENOMEM; + } + + itdevs[i] = itdev; + } + + pci_set_drvdata(dev, itdevs); + return ide_setup_pci_device(dev, &it821x_chipsets[id->driver_data]); } diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index a56bcb4f22f4..96ef7394f283 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c @@ -19,13 +19,13 @@ typedef enum { } port_type; /** - * ata66_jmicron - Cable check + * jmicron_cable_detect - cable detection * @hwif: IDE port * * Returns the cable type. */ -static u8 __devinit ata66_jmicron(ide_hwif_t *hwif) +static u8 __devinit jmicron_cable_detect(ide_hwif_t *hwif) { struct pci_dev *pdev = to_pci_dev(hwif->dev); @@ -63,8 +63,7 @@ static u8 __devinit ata66_jmicron(ide_hwif_t *hwif) * actually do our cable checking etc. Thankfully we don't need * to do the plumbing for other cases. */ - switch (port_map[port]) - { + switch (port_map[port]) { case PORT_PATA0: if (control & (1 << 3)) /* 40/80 pin primary */ return ATA_CBL_PATA40; @@ -96,26 +95,16 @@ static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode) { } -/** - * init_hwif_jmicron - set up hwif structs - * @hwif: interface to set up - * - * Minimal set up is required for the Jmicron hardware. - */ - -static void __devinit init_hwif_jmicron(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &jmicron_set_pio_mode; - hwif->set_dma_mode = &jmicron_set_dma_mode; - - hwif->cable_detect = ata66_jmicron; -} +static const struct ide_port_ops jmicron_port_ops = { + .set_pio_mode = jmicron_set_pio_mode, + .set_dma_mode = jmicron_set_dma_mode, + .cable_detect = jmicron_cable_detect, +}; static const struct ide_port_info jmicron_chipset __devinitdata = { .name = "JMB", - .init_hwif = init_hwif_jmicron, - .host_flags = IDE_HFLAG_BOOTABLE, .enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } }, + .port_ops = &jmicron_port_ops, .pio_mask = ATA_PIO5, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c index bf0d3b2931f1..e1b0c9a9ab9c 100644 --- a/drivers/ide/pci/ns87415.c +++ b/drivers/ide/pci/ns87415.c @@ -150,7 +150,7 @@ static void ns87415_selectproc (ide_drive_t *drive) ns87415_prepare_drive (drive, drive->using_dma); } -static int ns87415_ide_dma_end (ide_drive_t *drive) +static int ns87415_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); u8 dma_stat = 0, dma_cmd = 0; @@ -170,7 +170,7 @@ static int ns87415_ide_dma_end (ide_drive_t *drive) return (dma_stat & 7) != 4; } -static int ns87415_ide_dma_setup(ide_drive_t *drive) +static int ns87415_dma_setup(ide_drive_t *drive) { /* select DMA xfer */ ns87415_prepare_drive(drive, 1); @@ -181,6 +181,10 @@ static int ns87415_ide_dma_setup(ide_drive_t *drive) return 1; } +#ifndef ide_default_irq +#define ide_default_irq(irq) 0 +#endif + static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -191,8 +195,6 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) u8 stat; #endif - hwif->selectproc = &ns87415_selectproc; - /* * We cannot probe for IRQ: both ports share common IRQ on INTA. * Also, leave IRQ masked during drive probing, to prevent infinite @@ -250,19 +252,33 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif) return; outb(0x60, hwif->dma_status); - hwif->dma_setup = &ns87415_ide_dma_setup; - hwif->ide_dma_end = &ns87415_ide_dma_end; } +static const struct ide_port_ops ns87415_port_ops = { + .selectproc = ns87415_selectproc, +}; + +static const struct ide_dma_ops ns87415_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ns87415_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = ns87415_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + static const struct ide_port_info ns87415_chipset __devinitdata = { .name = "NS87415", #ifdef CONFIG_SUPERIO .init_iops = init_iops_ns87415, #endif .init_hwif = init_hwif_ns87415, + .port_ops = &ns87415_port_ops, + .dma_ops = &ns87415_dma_ops, .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | - IDE_HFLAG_NO_ATAPI_DMA | - IDE_HFLAG_BOOTABLE, + IDE_HFLAG_NO_ATAPI_DMA, }; static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 46e8748f507e..04fe7c4c2157 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -53,13 +53,12 @@ * If you then set the second drive to another PIO, the old value * (automatically selected) will be overrided by yours. * There is a 25/33MHz switch in configuration - * register, but driver is written for use at any frequency which get - * (use idebus=xx to select PCI bus speed). + * register, but driver is written for use at any frequency. * * Version 0.1, Nov 8, 1996 - * by Jaromir Koutek, for 2.1.8. + * by Jaromir Koutek, for 2.1.8. * Initial version of driver. - * + * * Version 0.2 * Number 0.2 skipped. * @@ -75,7 +74,7 @@ * by Jaromir Koutek * Updates for use with (again) new IDE block driver. * Update of documentation. - * + * * Version 0.6, Jan 2, 1999 * by Jaromir Koutek * Reversed to version 0.3 of the driver, because @@ -208,29 +207,34 @@ typedef struct pio_clocks_s { static void compute_clocks(int pio, pio_clocks_t *clks) { - if (pio != PIO_NOT_EXIST) { - int adr_setup, data_pls; - int bus_speed = system_bus_clock(); - - adr_setup = ide_pio_timings[pio].setup_time; - data_pls = ide_pio_timings[pio].active_time; - clks->address_time = cmpt_clk(adr_setup, bus_speed); - clks->data_time = cmpt_clk(data_pls, bus_speed); - clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time - - adr_setup-data_pls, bus_speed); - if (clks->address_time<1) clks->address_time = 1; - if (clks->address_time>4) clks->address_time = 4; - if (clks->data_time<1) clks->data_time = 1; - if (clks->data_time>16) clks->data_time = 16; - if (clks->recovery_time<2) clks->recovery_time = 2; - if (clks->recovery_time>17) clks->recovery_time = 17; + if (pio != PIO_NOT_EXIST) { + int adr_setup, data_pls; + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; + + adr_setup = ide_pio_timings[pio].setup_time; + data_pls = ide_pio_timings[pio].active_time; + clks->address_time = cmpt_clk(adr_setup, bus_speed); + clks->data_time = cmpt_clk(data_pls, bus_speed); + clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time + - adr_setup-data_pls, bus_speed); + if (clks->address_time < 1) + clks->address_time = 1; + if (clks->address_time > 4) + clks->address_time = 4; + if (clks->data_time < 1) + clks->data_time = 1; + if (clks->data_time > 16) + clks->data_time = 16; + if (clks->recovery_time < 2) + clks->recovery_time = 2; + if (clks->recovery_time > 17) + clks->recovery_time = 17; } else { clks->address_time = 1; clks->data_time = 1; clks->recovery_time = 2; /* minimal values */ } - } static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) @@ -247,8 +251,8 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) /* sets drive->drive_data for both drives */ compute_pios(drive, pio); - pio1 = hwif->drives[0].drive_data; - pio2 = hwif->drives[1].drive_data; + pio1 = hwif->drives[0].drive_data; + pio2 = hwif->drives[1].drive_data; compute_clocks(pio1, &first); compute_clocks(pio2, &second); @@ -275,7 +279,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_lock_irqsave(&opti621_lock, flags); - reg_base = hwif->io_ports[IDE_DATA_OFFSET]; + reg_base = hwif->io_ports[IDE_DATA_OFFSET]; /* allow Register-B */ outb(0xc0, reg_base + CNTRL_REG); @@ -321,31 +325,25 @@ static void __devinit opti621_port_init_devs(ide_hwif_t *hwif) hwif->drives[1].drive_data = PIO_DONT_KNOW; } -/* - * init_hwif_opti621() is called once for each hwif found at boot. - */ -static void __devinit init_hwif_opti621 (ide_hwif_t *hwif) -{ - hwif->port_init_devs = opti621_port_init_devs; - hwif->set_pio_mode = &opti621_set_pio_mode; -} +static const struct ide_port_ops opti621_port_ops = { + .port_init_devs = opti621_port_init_devs, + .set_pio_mode = opti621_set_pio_mode, +}; static const struct ide_port_info opti621_chipsets[] __devinitdata = { { /* 0 */ .name = "OPTI621", - .init_hwif = init_hwif_opti621, - .enablebits = {{0x45,0x80,0x00}, {0x40,0x08,0x00}}, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | - IDE_HFLAG_BOOTABLE, + .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, + .port_ops = &opti621_port_ops, + .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, .pio_mask = ATA_PIO3, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, - },{ /* 1 */ + }, { /* 1 */ .name = "OPTI621X", - .init_hwif = init_hwif_opti621, - .enablebits = {{0x45,0x80,0x00}, {0x40,0x08,0x00}}, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | - IDE_HFLAG_BOOTABLE, + .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, + .port_ops = &opti621_port_ops, + .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, .pio_mask = ATA_PIO3, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index 1c8cb7797a4a..ec9bd7b352fc 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -34,7 +34,7 @@ #undef DEBUG #ifdef DEBUG -#define DBG(fmt, args...) printk("%s: " fmt, __FUNCTION__, ## args) +#define DBG(fmt, args...) printk("%s: " fmt, __func__, ## args) #else #define DBG(fmt, args...) #endif @@ -442,17 +442,6 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha return dev->irq; } -static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &pdcnew_set_pio_mode; - hwif->set_dma_mode = &pdcnew_set_dma_mode; - - hwif->quirkproc = &pdcnew_quirkproc; - hwif->resetproc = &pdcnew_reset; - - hwif->cable_detect = pdcnew_cable_detect; -} - static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) { struct pci_dev *dev2; @@ -476,11 +465,19 @@ static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) return NULL; } +static const struct ide_port_ops pdcnew_port_ops = { + .set_pio_mode = pdcnew_set_pio_mode, + .set_dma_mode = pdcnew_set_dma_mode, + .quirkproc = pdcnew_quirkproc, + .resetproc = pdcnew_reset, + .cable_detect = pdcnew_cable_detect, +}; + #define DECLARE_PDCNEW_DEV(name_str, udma) \ { \ .name = name_str, \ .init_chipset = init_chipset_pdcnew, \ - .init_hwif = init_hwif_pdc202new, \ + .port_ops = &pdcnew_port_ops, \ .host_flags = IDE_HFLAG_POST_SET_MODE | \ IDE_HFLAG_ERROR_STOPS_FIFO | \ IDE_HFLAG_OFF_BOARD, \ diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index 150422ec3cfa..fca89eda5c02 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -115,7 +115,7 @@ static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio) pdc202xx_set_mode(drive, XFER_PIO_0 + pio); } -static u8 __devinit pdc2026x_old_cable_detect(ide_hwif_t *hwif) +static u8 __devinit pdc2026x_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10); @@ -163,7 +163,7 @@ static void pdc202xx_quirkproc(ide_drive_t *drive) drive->quirk_list = 0; } -static void pdc202xx_old_ide_dma_start(ide_drive_t *drive) +static void pdc202xx_dma_start(ide_drive_t *drive) { if (drive->current_speed > XFER_UDMA_2) pdc_old_enable_66MHz_clock(drive->hwif); @@ -185,7 +185,7 @@ static void pdc202xx_old_ide_dma_start(ide_drive_t *drive) ide_dma_start(drive); } -static int pdc202xx_old_ide_dma_end(ide_drive_t *drive) +static int pdc202xx_dma_end(ide_drive_t *drive) { if (drive->media != ide_disk || drive->addressing == 1) { ide_hwif_t *hwif = HWIF(drive); @@ -202,7 +202,7 @@ static int pdc202xx_old_ide_dma_end(ide_drive_t *drive) return __ide_dma_end(drive); } -static int pdc202xx_old_ide_dma_test_irq(ide_drive_t *drive) +static int pdc202xx_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long high_16 = hwif->extra_base - 16; @@ -226,26 +226,6 @@ somebody_else: return (dma_stat & 4) == 4; /* return 1 if INTR asserted */ } -static void pdc202xx_dma_lost_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - - if (hwif->resetproc != NULL) - hwif->resetproc(drive); - - ide_dma_lost_irq(drive); -} - -static void pdc202xx_dma_timeout(ide_drive_t *drive) -{ - ide_hwif_t *hwif = HWIF(drive); - - if (hwif->resetproc != NULL) - hwif->resetproc(drive); - - ide_dma_timeout(drive); -} - static void pdc202xx_reset_host (ide_hwif_t *hwif) { unsigned long high_16 = hwif->extra_base - 16; @@ -271,68 +251,46 @@ static void pdc202xx_reset (ide_drive_t *drive) ide_set_max_pio(drive); } -static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev, - const char *name) +static void pdc202xx_dma_lost_irq(ide_drive_t *drive) { - return dev->irq; + pdc202xx_reset(drive); + ide_dma_lost_irq(drive); } -static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif) +static void pdc202xx_dma_timeout(ide_drive_t *drive) { - struct pci_dev *dev = to_pci_dev(hwif->dev); - - hwif->set_pio_mode = &pdc202xx_set_pio_mode; - hwif->set_dma_mode = &pdc202xx_set_mode; - - hwif->quirkproc = &pdc202xx_quirkproc; - - if (dev->device != PCI_DEVICE_ID_PROMISE_20246) { - hwif->resetproc = &pdc202xx_reset; - - hwif->cable_detect = pdc2026x_old_cable_detect; - } - - if (hwif->dma_base == 0) - return; - - hwif->dma_lost_irq = &pdc202xx_dma_lost_irq; - hwif->dma_timeout = &pdc202xx_dma_timeout; - - if (dev->device != PCI_DEVICE_ID_PROMISE_20246) { - hwif->dma_start = &pdc202xx_old_ide_dma_start; - hwif->ide_dma_end = &pdc202xx_old_ide_dma_end; - } - hwif->ide_dma_test_irq = &pdc202xx_old_ide_dma_test_irq; + pdc202xx_reset(drive); + ide_dma_timeout(drive); } -static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase) +static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev, + const char *name) { + unsigned long dmabase = pci_resource_start(dev, 4); u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0; - if (hwif->channel) { - ide_setup_dma(hwif, dmabase); - return; - } + if (dmabase == 0) + goto out; udma_speed_flag = inb(dmabase | 0x1f); primary_mode = inb(dmabase | 0x1a); secondary_mode = inb(dmabase | 0x1b); printk(KERN_INFO "%s: (U)DMA Burst Bit %sABLED " \ "Primary %s Mode " \ - "Secondary %s Mode.\n", hwif->cds->name, + "Secondary %s Mode.\n", pci_name(dev), (udma_speed_flag & 1) ? "EN" : "DIS", (primary_mode & 1) ? "MASTER" : "PCI", (secondary_mode & 1) ? "MASTER" : "PCI" ); if (!(udma_speed_flag & 1)) { printk(KERN_INFO "%s: FORCING BURST BIT 0x%02x->0x%02x ", - hwif->cds->name, udma_speed_flag, + pci_name(dev), udma_speed_flag, (udma_speed_flag|1)); outb(udma_speed_flag | 1, dmabase | 0x1f); printk("%sACTIVE\n", (inb(dmabase | 0x1f) & 1) ? "" : "IN"); } - - ide_setup_dma(hwif, dmabase); +out: + return dev->irq; } static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev, @@ -357,13 +315,48 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev, IDE_HFLAG_ABUSE_SET_DMA_MODE | \ IDE_HFLAG_OFF_BOARD) +static const struct ide_port_ops pdc20246_port_ops = { + .set_pio_mode = pdc202xx_set_pio_mode, + .set_dma_mode = pdc202xx_set_mode, + .quirkproc = pdc202xx_quirkproc, +}; + +static const struct ide_port_ops pdc2026x_port_ops = { + .set_pio_mode = pdc202xx_set_pio_mode, + .set_dma_mode = pdc202xx_set_mode, + .quirkproc = pdc202xx_quirkproc, + .resetproc = pdc202xx_reset, + .cable_detect = pdc2026x_cable_detect, +}; + +static const struct ide_dma_ops pdc20246_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = __ide_dma_end, + .dma_test_irq = pdc202xx_dma_test_irq, + .dma_lost_irq = pdc202xx_dma_lost_irq, + .dma_timeout = pdc202xx_dma_timeout, +}; + +static const struct ide_dma_ops pdc2026x_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = pdc202xx_dma_start, + .dma_end = pdc202xx_dma_end, + .dma_test_irq = pdc202xx_dma_test_irq, + .dma_lost_irq = pdc202xx_dma_lost_irq, + .dma_timeout = pdc202xx_dma_timeout, +}; + #define DECLARE_PDC2026X_DEV(name_str, udma, extra_flags) \ { \ .name = name_str, \ .init_chipset = init_chipset_pdc202xx, \ - .init_hwif = init_hwif_pdc202xx, \ - .init_dma = init_dma_pdc202xx, \ - .extra = 48, \ + .port_ops = &pdc2026x_port_ops, \ + .dma_ops = &pdc2026x_dma_ops, \ .host_flags = IDE_HFLAGS_PDC202XX | extra_flags, \ .pio_mask = ATA_PIO4, \ .mwdma_mask = ATA_MWDMA2, \ @@ -374,9 +367,8 @@ static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = { { /* 0 */ .name = "PDC20246", .init_chipset = init_chipset_pdc202xx, - .init_hwif = init_hwif_pdc202xx, - .init_dma = init_dma_pdc202xx, - .extra = 16, + .port_ops = &pdc20246_port_ops, + .dma_ops = &pdc20246_dma_ops, .host_flags = IDE_HFLAGS_PDC202XX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index decef0f47674..21c5dd23f928 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -285,11 +285,6 @@ static u8 __devinit piix_cable_detect(ide_hwif_t *hwif) static void __devinit init_hwif_piix(ide_hwif_t *hwif) { - hwif->set_pio_mode = &piix_set_pio_mode; - hwif->set_dma_mode = &piix_set_dma_mode; - - hwif->cable_detect = piix_cable_detect; - if (!hwif->dma_base) return; @@ -306,10 +301,16 @@ static void __devinit init_hwif_ich(ide_hwif_t *hwif) hwif->ide_dma_clear_irq = &piix_dma_clear_irq; } +static const struct ide_port_ops piix_port_ops = { + .set_pio_mode = piix_set_pio_mode, + .set_dma_mode = piix_set_dma_mode, + .cable_detect = piix_cable_detect, +}; + #ifndef CONFIG_IA64 - #define IDE_HFLAGS_PIIX (IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE) + #define IDE_HFLAGS_PIIX IDE_HFLAG_LEGACY_IRQS #else - #define IDE_HFLAGS_PIIX IDE_HFLAG_BOOTABLE + #define IDE_HFLAGS_PIIX 0 #endif #define DECLARE_PIIX_DEV(name_str, udma) \ @@ -317,6 +318,7 @@ static void __devinit init_hwif_ich(ide_hwif_t *hwif) .name = name_str, \ .init_hwif = init_hwif_piix, \ .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ + .port_ops = &piix_port_ops, \ .host_flags = IDE_HFLAGS_PIIX, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ @@ -330,6 +332,7 @@ static void __devinit init_hwif_ich(ide_hwif_t *hwif) .init_chipset = init_chipset_ich, \ .init_hwif = init_hwif_ich, \ .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \ + .port_ops = &piix_port_ops, \ .host_flags = IDE_HFLAGS_PIIX, \ .pio_mask = ATA_PIO4, \ .swdma_mask = ATA_SWDMA2_ONLY, \ diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c index 51676612f78f..532154adba29 100644 --- a/drivers/ide/pci/rz1000.c +++ b/drivers/ide/pci/rz1000.c @@ -43,7 +43,7 @@ static const struct ide_port_info rz1000_chipset __devinitdata = { .name = "RZ100x", .init_hwif = init_hwif_rz1000, .chipset = ide_rz1000, - .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_BOOTABLE, + .host_flags = IDE_HFLAG_NO_DMA, }; static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index 561aa47c7720..14c787b5d95f 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -165,7 +165,7 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode) * * returns 1 on error, 0 otherwise */ -static int sc1200_ide_dma_end (ide_drive_t *drive) +static int sc1200_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long dma_base = hwif->dma_base; @@ -214,7 +214,7 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio) printk("SC1200: %s: changing (U)DMA mode\n", drive->name); ide_dma_off_quietly(drive); if (ide_set_dma_mode(drive, mode) == 0 && drive->using_dma) - hwif->dma_host_set(drive, 1); + hwif->dma_ops->dma_host_set(drive, 1); return; } @@ -286,29 +286,30 @@ static int sc1200_resume (struct pci_dev *dev) } #endif -/* - * This gets invoked by the IDE driver once for each channel, - * and performs channel-specific pre-initialization before drive probing. - */ -static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &sc1200_set_pio_mode; - hwif->set_dma_mode = &sc1200_set_dma_mode; - - if (hwif->dma_base == 0) - return; +static const struct ide_port_ops sc1200_port_ops = { + .set_pio_mode = sc1200_set_pio_mode, + .set_dma_mode = sc1200_set_dma_mode, + .udma_filter = sc1200_udma_filter, +}; - hwif->udma_filter = sc1200_udma_filter; - hwif->ide_dma_end = &sc1200_ide_dma_end; -} +static const struct ide_dma_ops sc1200_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = sc1200_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; static const struct ide_port_info sc1200_chipset __devinitdata = { .name = "SC1200", - .init_hwif = init_hwif_sc1200, + .port_ops = &sc1200_port_ops, + .dma_ops = &sc1200_dma_ops, .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_ABUSE_DMA_MODES | - IDE_HFLAG_BOOTABLE, + IDE_HFLAG_ABUSE_DMA_MODES, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 238e3e181e87..220c980a55cf 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -65,7 +65,7 @@ static struct scc_ports { unsigned long ctl, dma; - unsigned char hwif_id; /* for removing hwif from system */ + ide_hwif_t *hwif; /* for removing port from system */ } scc_ports[MAX_HWIFS]; /* PIO transfer mode table */ @@ -317,14 +317,14 @@ static int scc_dma_setup(ide_drive_t *drive) /** - * scc_ide_dma_end - Stop DMA + * scc_dma_end - Stop DMA * @drive: IDE drive * * Check and clear INT Status register. * Then call __ide_dma_end(). */ -static int scc_ide_dma_end(ide_drive_t * drive) +static int scc_dma_end(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long intsts_port = hwif->dma_base + 0x014; @@ -334,7 +334,8 @@ static int scc_ide_dma_end(ide_drive_t * drive) /* errata A308 workaround: Step5 (check data loss) */ /* We don't check non ide_disk because it is limited to UDMA4 */ - if (!(in_be32((void __iomem *)IDE_ALTSTATUS_REG) & ERR_STAT) && + if (!(in_be32((void __iomem *)hwif->io_ports[IDE_ALTSTATUS_OFFSET]) + & ERR_STAT) && drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) { reg = in_be32((void __iomem *)intsts_port); if (!(reg & INTSTS_ACTEINT)) { @@ -437,7 +438,8 @@ static int scc_dma_test_irq(ide_drive_t *drive) u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014); /* SCC errata A252,A308 workaround: Step4 */ - if ((in_be32((void __iomem *)IDE_ALTSTATUS_REG) & ERR_STAT) && + if ((in_be32((void __iomem *)hwif->io_ports[IDE_ALTSTATUS_OFFSET]) + & ERR_STAT) && (int_stat & INTSTS_INTRQ)) return 1; @@ -447,7 +449,7 @@ static int scc_dma_test_irq(ide_drive_t *drive) if (!drive->waiting_for_dma) printk(KERN_WARNING "%s: (%s) called while not waiting\n", - drive->name, __FUNCTION__); + drive->name, __func__); return 0; } @@ -490,21 +492,11 @@ static int setup_mmio_scc (struct pci_dev *dev, const char *name) if (i >= MAX_HWIFS) return -ENOMEM; - if (!request_mem_region(ctl_base, ctl_size, name)) { - printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME); - goto fail_0; - } - - if (!request_mem_region(dma_base, dma_size, name)) { - printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME); - goto fail_1; - } - if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL) - goto fail_2; + goto fail_0; if ((dma_addr = ioremap(dma_base, dma_size)) == NULL) - goto fail_3; + goto fail_1; pci_set_master(dev); scc_ports[i].ctl = (unsigned long)ctl_addr; @@ -513,12 +505,8 @@ static int setup_mmio_scc (struct pci_dev *dev, const char *name) return 1; - fail_3: - iounmap(ctl_addr); - fail_2: - release_mem_region(dma_base, dma_size); fail_1: - release_mem_region(ctl_base, ctl_size); + iounmap(ctl_addr); fail_0: return -ENOMEM; } @@ -662,7 +650,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif) { struct scc_ports *ports = ide_get_hwifdata(hwif); - ports->hwif_id = hwif->index; + ports->hwif = hwif; hwif->dma_command = hwif->dma_base; hwif->dma_status = hwif->dma_base + 0x04; @@ -671,28 +659,38 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif) /* PTERADD */ out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma); - hwif->dma_setup = scc_dma_setup; - hwif->ide_dma_end = scc_ide_dma_end; - hwif->set_pio_mode = scc_set_pio_mode; - hwif->set_dma_mode = scc_set_dma_mode; - hwif->ide_dma_test_irq = scc_dma_test_irq; - hwif->udma_filter = scc_udma_filter; - if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) hwif->ultra_mask = ATA_UDMA6; /* 133MHz */ else hwif->ultra_mask = ATA_UDMA5; /* 100MHz */ - - hwif->cable_detect = scc_cable_detect; } +static const struct ide_port_ops scc_port_ops = { + .set_pio_mode = scc_set_pio_mode, + .set_dma_mode = scc_set_dma_mode, + .udma_filter = scc_udma_filter, + .cable_detect = scc_cable_detect, +}; + +static const struct ide_dma_ops scc_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = scc_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = ide_dma_start, + .dma_end = scc_dma_end, + .dma_test_irq = scc_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + #define DECLARE_SCC_DEV(name_str) \ { \ .name = name_str, \ .init_iops = init_iops_scc, \ .init_hwif = init_hwif_scc, \ - .host_flags = IDE_HFLAG_SINGLE | \ - IDE_HFLAG_BOOTABLE, \ + .port_ops = &scc_port_ops, \ + .dma_ops = &scc_dma_ops, \ + .host_flags = IDE_HFLAG_SINGLE, \ .pio_mask = ATA_PIO4, \ } @@ -724,11 +722,7 @@ static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_i static void __devexit scc_remove(struct pci_dev *dev) { struct scc_ports *ports = pci_get_drvdata(dev); - ide_hwif_t *hwif = &ide_hwifs[ports->hwif_id]; - unsigned long ctl_base = pci_resource_start(dev, 0); - unsigned long dma_base = pci_resource_start(dev, 1); - unsigned long ctl_size = pci_resource_len(dev, 0); - unsigned long dma_size = pci_resource_len(dev, 1); + ide_hwif_t *hwif = ports->hwif; if (hwif->dmatable_cpu) { pci_free_consistent(dev, PRD_ENTRIES * PRD_BYTES, @@ -736,13 +730,11 @@ static void __devexit scc_remove(struct pci_dev *dev) hwif->dmatable_cpu = NULL; } - ide_unregister(hwif->index, 0, 0); + ide_unregister(hwif); - hwif->chipset = ide_unknown; iounmap((void*)ports->dma); iounmap((void*)ports->ctl); - release_mem_region(dma_base, dma_size); - release_mem_region(ctl_base, ctl_size); + pci_release_selected_regions(dev, (1 << 2) - 1); memset(ports, 0, sizeof(*ports)); } diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index c11880b0709f..a1fb20826a5b 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -312,7 +312,7 @@ static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif) return ATA_CBL_PATA40; } -static u8 __devinit ata66_svwks(ide_hwif_t *hwif) +static u8 __devinit svwks_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -336,28 +336,28 @@ static u8 __devinit ata66_svwks(ide_hwif_t *hwif) return ATA_CBL_PATA40; } -static void __devinit init_hwif_svwks (ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - hwif->set_pio_mode = &svwks_set_pio_mode; - hwif->set_dma_mode = &svwks_set_dma_mode; - hwif->udma_filter = &svwks_udma_filter; +static const struct ide_port_ops osb4_port_ops = { + .set_pio_mode = svwks_set_pio_mode, + .set_dma_mode = svwks_set_dma_mode, + .udma_filter = svwks_udma_filter, +}; - if (dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) - hwif->cable_detect = ata66_svwks; -} +static const struct ide_port_ops svwks_port_ops = { + .set_pio_mode = svwks_set_pio_mode, + .set_dma_mode = svwks_set_dma_mode, + .udma_filter = svwks_udma_filter, + .cable_detect = svwks_cable_detect, +}; #define IDE_HFLAGS_SVWKS \ (IDE_HFLAG_LEGACY_IRQS | \ - IDE_HFLAG_ABUSE_SET_DMA_MODE | \ - IDE_HFLAG_BOOTABLE) + IDE_HFLAG_ABUSE_SET_DMA_MODE) static const struct ide_port_info serverworks_chipsets[] __devinitdata = { { /* 0 */ .name = "SvrWks OSB4", .init_chipset = init_chipset_svwks, - .init_hwif = init_hwif_svwks, + .port_ops = &osb4_port_ops, .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -365,7 +365,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { },{ /* 1 */ .name = "SvrWks CSB5", .init_chipset = init_chipset_svwks, - .init_hwif = init_hwif_svwks, + .port_ops = &svwks_port_ops, .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -373,7 +373,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { },{ /* 2 */ .name = "SvrWks CSB6", .init_chipset = init_chipset_svwks, - .init_hwif = init_hwif_svwks, + .port_ops = &svwks_port_ops, .host_flags = IDE_HFLAGS_SVWKS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -381,7 +381,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { },{ /* 3 */ .name = "SvrWks CSB6", .init_chipset = init_chipset_svwks, - .init_hwif = init_hwif_svwks, + .port_ops = &svwks_port_ops, .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -389,7 +389,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = { },{ /* 4 */ .name = "SvrWks HT1000", .init_chipset = init_chipset_svwks, - .init_hwif = init_hwif_svwks, + .port_ops = &svwks_port_ops, .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -418,7 +418,7 @@ static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device else if (idx == 2 || idx == 3) { if ((PCI_FUNC(dev->devfn) & 1) == 0) { if (pci_resource_start(dev, 0) != 0x01f1) - d.host_flags &= ~IDE_HFLAG_BOOTABLE; + d.host_flags |= IDE_HFLAG_NON_BOOTABLE; d.host_flags |= IDE_HFLAG_SINGLE; } else d.host_flags &= ~IDE_HFLAG_SINGLE; diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 054626497be4..bfcd2acfede0 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -112,10 +112,9 @@ static void sgiioc4_maskproc(ide_drive_t * drive, int mask) { writeb(mask ? (drive->ctl | 2) : (drive->ctl & ~2), - (void __iomem *)IDE_CONTROL_REG); + (void __iomem *)drive->hwif->io_ports[IDE_CONTROL_OFFSET]); } - static int sgiioc4_checkirq(ide_hwif_t * hwif) { @@ -142,18 +141,18 @@ sgiioc4_clearirq(ide_drive_t * drive) intr_reg = readl((void __iomem *)other_ir); if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */ /* - * Using sgiioc4_INB to read the IDE_STATUS_REG has a side effect - * of clearing the interrupt. The first read should clear it - * if it is set. The second read should return a "clear" status - * if it got cleared. If not, then spin for a bit trying to - * clear it. + * Using sgiioc4_INB to read the Status register has a side + * effect of clearing the interrupt. The first read should + * clear it if it is set. The second read should return + * a "clear" status if it got cleared. If not, then spin + * for a bit trying to clear it. */ - u8 stat = sgiioc4_INB(IDE_STATUS_REG); + u8 stat = sgiioc4_INB(hwif->io_ports[IDE_STATUS_OFFSET]); int count = 0; - stat = sgiioc4_INB(IDE_STATUS_REG); + stat = sgiioc4_INB(hwif->io_ports[IDE_STATUS_OFFSET]); while ((stat & 0x80) && (count++ < 100)) { udelay(1); - stat = sgiioc4_INB(IDE_STATUS_REG); + stat = sgiioc4_INB(hwif->io_ports[IDE_STATUS_OFFSET]); } if (intr_reg & 0x02) { @@ -171,10 +170,10 @@ sgiioc4_clearirq(ide_drive_t * drive) printk(KERN_ERR "%s(%s) : PCI Bus Error when doing DMA:" " status-cmd reg is 0x%x\n", - __FUNCTION__, drive->name, pci_stat_cmd_reg); + __func__, drive->name, pci_stat_cmd_reg); printk(KERN_ERR "%s(%s) : PCI Error Address is 0x%x%x\n", - __FUNCTION__, drive->name, + __func__, drive->name, pci_err_addr_high, pci_err_addr_low); /* Clear the PCI Error indicator */ pci_write_config_dword(dev, PCI_COMMAND, 0x00000146); @@ -189,7 +188,7 @@ sgiioc4_clearirq(ide_drive_t * drive) return intr_reg & 3; } -static void sgiioc4_ide_dma_start(ide_drive_t * drive) +static void sgiioc4_dma_start(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4; @@ -216,8 +215,7 @@ sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base) } /* Stops the IOC4 DMA Engine */ -static int -sgiioc4_ide_dma_end(ide_drive_t * drive) +static int sgiioc4_dma_end(ide_drive_t *drive) { u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0; ide_hwif_t *hwif = HWIF(drive); @@ -233,7 +231,7 @@ sgiioc4_ide_dma_end(ide_drive_t * drive) printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is still 1 :" "ioc4_dma_reg 0x%x\n", - __FUNCTION__, drive->name, ioc4_dma); + __func__, drive->name, ioc4_dma); dma_stat = 1; } @@ -252,7 +250,7 @@ sgiioc4_ide_dma_end(ide_drive_t * drive) udelay(1); } if (!valid) { - printk(KERN_ERR "%s(%s) : DMA incomplete\n", __FUNCTION__, + printk(KERN_ERR "%s(%s) : DMA incomplete\n", __func__, drive->name); dma_stat = 1; } @@ -265,7 +263,7 @@ sgiioc4_ide_dma_end(ide_drive_t * drive) printk(KERN_ERR "%s(%s): WARNING!! byte_count_dev %d " "!= byte_count_mem %d\n", - __FUNCTION__, drive->name, bc_dev, bc_mem); + __func__, drive->name, bc_dev, bc_mem); } } @@ -280,8 +278,7 @@ static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed) } /* returns 1 if dma irq issued, 0 otherwise */ -static int -sgiioc4_ide_dma_test_irq(ide_drive_t * drive) +static int sgiioc4_dma_test_irq(ide_drive_t *drive) { return sgiioc4_checkirq(HWIF(drive)); } @@ -295,7 +292,7 @@ static void sgiioc4_dma_host_set(ide_drive_t *drive, int on) static void sgiioc4_resetproc(ide_drive_t * drive) { - sgiioc4_ide_dma_end(drive); + sgiioc4_dma_end(drive); sgiioc4_clearirq(drive); } @@ -330,13 +327,17 @@ sgiioc4_INB(unsigned long port) /* Creates a dma map for the scatter-gather list entries */ static int __devinit -ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) +ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET; void __iomem *virt_dma_base; int num_ports = sizeof (ioc4_dma_regs_t); void *pad; + if (dma_base == 0) + return -1; + printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name, dma_base, dma_base + num_ports - 1); @@ -344,7 +345,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) printk(KERN_ERR "%s(%s) -- ERROR, Addresses 0x%p to 0x%p " "ALREADY in use\n", - __FUNCTION__, hwif->name, (void *) dma_base, + __func__, hwif->name, (void *) dma_base, (void *) dma_base + num_ports - 1); return -1; } @@ -353,7 +354,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) if (virt_dma_base == NULL) { printk(KERN_ERR "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n", - __FUNCTION__, hwif->name, dma_base, dma_base + num_ports - 1); + __func__, hwif->name, dma_base, dma_base + num_ports - 1); goto dma_remap_failure; } hwif->dma_base = (unsigned long) virt_dma_base; @@ -379,7 +380,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base) hwif->dmatable_cpu, hwif->dmatable_dma); printk(KERN_INFO "%s() -- Error! Unable to allocate DMA Maps for drive %s\n", - __FUNCTION__, hwif->name); + __func__, hwif->name); printk(KERN_INFO "Changing from DMA to PIO mode for Drive %s\n", hwif->name); @@ -407,14 +408,14 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) if (ioc4_dma & IOC4_S_DMA_ACTIVE) { printk(KERN_WARNING "%s(%s):Warning!! DMA from previous transfer was still active\n", - __FUNCTION__, drive->name); + __func__, drive->name); writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr); ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); if (ioc4_dma & IOC4_S_DMA_STOP) printk(KERN_ERR "%s(%s) : IOC4 Dma STOP bit is still 1\n", - __FUNCTION__, drive->name); + __func__, drive->name); } ioc4_dma = readl((void __iomem *)ioc4_dma_addr); @@ -422,14 +423,14 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) printk(KERN_WARNING "%s(%s) : Warning!! - DMA Error during Previous" " transfer | status 0x%x\n", - __FUNCTION__, drive->name, ioc4_dma); + __func__, drive->name, ioc4_dma); writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr); ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base); if (ioc4_dma & IOC4_S_DMA_STOP) printk(KERN_ERR "%s(%s) : IOC4 DMA STOP bit is still 1\n", - __FUNCTION__, drive->name); + __func__, drive->name); } /* Address of the Scatter Gather List */ @@ -520,7 +521,7 @@ use_pio_instead: return 0; /* revert to PIO for this request */ } -static int sgiioc4_ide_dma_setup(ide_drive_t *drive) +static int sgiioc4_dma_setup(ide_drive_t *drive) { struct request *rq = HWGROUP(drive)->rq; unsigned int count = 0; @@ -549,63 +550,45 @@ static int sgiioc4_ide_dma_setup(ide_drive_t *drive) return 0; } -static void __devinit -ide_init_sgiioc4(ide_hwif_t * hwif) -{ - hwif->mmio = 1; - hwif->set_pio_mode = NULL; /* Sets timing for PIO mode */ - hwif->set_dma_mode = &sgiioc4_set_dma_mode; - hwif->selectproc = NULL;/* Use the default routine to select drive */ - hwif->reset_poll = NULL;/* No HBA specific reset_poll needed */ - hwif->pre_reset = NULL; /* No HBA specific pre_set needed */ - hwif->resetproc = &sgiioc4_resetproc;/* Reset DMA engine, - clear interrupts */ - hwif->maskproc = &sgiioc4_maskproc; /* Mask on/off NIEN register */ - hwif->quirkproc = NULL; - hwif->busproc = NULL; - - hwif->INB = &sgiioc4_INB; - - if (hwif->dma_base == 0) - return; +static const struct ide_port_ops sgiioc4_port_ops = { + .set_dma_mode = sgiioc4_set_dma_mode, + /* reset DMA engine, clear IRQs */ + .resetproc = sgiioc4_resetproc, + /* mask on/off NIEN register */ + .maskproc = sgiioc4_maskproc, +}; - hwif->dma_host_set = &sgiioc4_dma_host_set; - hwif->dma_setup = &sgiioc4_ide_dma_setup; - hwif->dma_start = &sgiioc4_ide_dma_start; - hwif->ide_dma_end = &sgiioc4_ide_dma_end; - hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq; - hwif->dma_lost_irq = &sgiioc4_dma_lost_irq; - hwif->dma_timeout = &ide_dma_timeout; -} +static const struct ide_dma_ops sgiioc4_dma_ops = { + .dma_host_set = sgiioc4_dma_host_set, + .dma_setup = sgiioc4_dma_setup, + .dma_start = sgiioc4_dma_start, + .dma_end = sgiioc4_dma_end, + .dma_test_irq = sgiioc4_dma_test_irq, + .dma_lost_irq = sgiioc4_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; static const struct ide_port_info sgiioc4_port_info __devinitdata = { .chipset = ide_pci, - .host_flags = IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ - IDE_HFLAG_NO_AUTOTUNE, + .init_dma = ide_dma_sgiioc4, + .port_ops = &sgiioc4_port_ops, + .dma_ops = &sgiioc4_dma_ops, .mwdma_mask = ATA_MWDMA2_ONLY, }; static int __devinit sgiioc4_ide_setup_pci_device(struct pci_dev *dev) { - unsigned long cmd_base, dma_base, irqport; + unsigned long cmd_base, irqport; unsigned long bar0, cmd_phys_base, ctl; void __iomem *virt_base; ide_hwif_t *hwif; - int h; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; hw_regs_t hw; struct ide_port_info d = sgiioc4_port_info; - /* - * Find an empty HWIF; if none available, return -ENOMEM. - */ - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->chipset == ide_unknown) - break; - } - if (h == MAX_HWIFS) { + hwif = ide_find_port(); + if (hwif == NULL) { printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", DRV_NAME); return -ENOMEM; @@ -622,7 +605,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET; ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET; irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET; - dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET; cmd_phys_base = bar0 + IOC4_CMD_OFFSET; if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE, @@ -630,7 +612,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) printk(KERN_ERR "%s : %s -- ERROR, Addresses " "0x%p to 0x%p ALREADY in use\n", - __FUNCTION__, hwif->name, (void *) cmd_phys_base, + __func__, hwif->name, (void *) cmd_phys_base, (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE); return -ENOMEM; } @@ -651,13 +633,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) /* Initializing chipset IRQ Registers */ writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4)); - if (dma_base == 0 || ide_dma_sgiioc4(hwif, dma_base)) { - printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n", - hwif->name, DRV_NAME); - d.mwdma_mask = 0; - } - - ide_init_sgiioc4(hwif); + hwif->INB = &sgiioc4_INB; idx[0] = hwif->index; diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index cc4be9621bc0..0ec1a9ad363c 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -301,7 +301,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) } /* returns 1 if dma irq issued, 0 otherwise */ -static int siimage_io_ide_dma_test_irq (ide_drive_t *drive) +static int siimage_io_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -320,14 +320,14 @@ static int siimage_io_ide_dma_test_irq (ide_drive_t *drive) } /** - * siimage_mmio_ide_dma_test_irq - check we caused an IRQ + * siimage_mmio_dma_test_irq - check we caused an IRQ * @drive: drive we are testing * * Check if we caused an IDE DMA interrupt. We may also have caused * SATA status interrupts, if so we clean them up and continue. */ - -static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive) + +static int siimage_mmio_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long addr = siimage_selreg(hwif, 0x1); @@ -347,7 +347,7 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive) printk(KERN_WARNING "%s: sata_error = 0x%08x, " "watchdog = %d, %s\n", drive->name, sata_error, watchdog, - __FUNCTION__); + __func__); } else { watchdog = (ext_stat & 0x8000) ? 1 : 0; @@ -369,46 +369,12 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive) return 0; } -/** - * sil_sata_busproc - bus isolation IOCTL - * @drive: drive to isolate/restore - * @state: bus state to set - * - * Used by the SII3112 to handle bus isolation. As this is a - * SATA controller the work required is quite limited, we - * just have to clean up the statistics - */ - -static int sil_sata_busproc(ide_drive_t * drive, int state) +static int siimage_dma_test_irq(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - u32 stat_config = 0; - unsigned long addr = siimage_selreg(hwif, 0); - - if (hwif->mmio) - stat_config = readl((void __iomem *)addr); + if (drive->hwif->mmio) + return siimage_mmio_dma_test_irq(drive); else - pci_read_config_dword(dev, addr, &stat_config); - - switch (state) { - case BUSSTATE_ON: - hwif->drives[0].failures = 0; - hwif->drives[1].failures = 0; - break; - case BUSSTATE_OFF: - hwif->drives[0].failures = hwif->drives[0].max_failures + 1; - hwif->drives[1].failures = hwif->drives[1].max_failures + 1; - break; - case BUSSTATE_TRISTATE: - hwif->drives[0].failures = hwif->drives[0].max_failures + 1; - hwif->drives[1].failures = hwif->drives[1].max_failures + 1; - break; - default: - return -EINVAL; - } - hwif->bus_state = state; - return 0; + return siimage_io_dma_test_irq(drive); } /** @@ -777,14 +743,14 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif) } /** - * ata66_siimage - check for 80 pin cable + * sil_cable_detect - cable detection * @hwif: interface to check * * Check for the presence of an ATA66 capable cable on the * interface. */ -static u8 __devinit ata66_siimage(ide_hwif_t *hwif) +static u8 __devinit sil_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long addr = siimage_selreg(hwif, 0); @@ -798,69 +764,44 @@ static u8 __devinit ata66_siimage(ide_hwif_t *hwif) return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40; } -/** - * init_hwif_siimage - set up hwif structs - * @hwif: interface to set up - * - * We do the basic set up of the interface structure. The SIIMAGE - * requires several custom handlers so we override the default - * ide DMA handlers appropriately - */ - -static void __devinit init_hwif_siimage(ide_hwif_t *hwif) -{ - u8 sata = is_sata(hwif); - - hwif->set_pio_mode = &sil_set_pio_mode; - hwif->set_dma_mode = &sil_set_dma_mode; - hwif->quirkproc = &sil_quirkproc; - - if (sata) { - static int first = 1; - - hwif->busproc = &sil_sata_busproc; - hwif->reset_poll = &sil_sata_reset_poll; - hwif->pre_reset = &sil_sata_pre_reset; - hwif->udma_filter = &sil_sata_udma_filter; - - if (first) { - printk(KERN_INFO "siimage: For full SATA support you should use the libata sata_sil module.\n"); - first = 0; - } - } else - hwif->udma_filter = &sil_pata_udma_filter; - - hwif->cable_detect = ata66_siimage; - - if (hwif->dma_base == 0) - return; +static const struct ide_port_ops sil_pata_port_ops = { + .set_pio_mode = sil_set_pio_mode, + .set_dma_mode = sil_set_dma_mode, + .quirkproc = sil_quirkproc, + .udma_filter = sil_pata_udma_filter, + .cable_detect = sil_cable_detect, +}; - if (sata) - hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA; +static const struct ide_port_ops sil_sata_port_ops = { + .set_pio_mode = sil_set_pio_mode, + .set_dma_mode = sil_set_dma_mode, + .reset_poll = sil_sata_reset_poll, + .pre_reset = sil_sata_pre_reset, + .quirkproc = sil_quirkproc, + .udma_filter = sil_sata_udma_filter, + .cable_detect = sil_cable_detect, +}; - if (hwif->mmio) { - hwif->ide_dma_test_irq = &siimage_mmio_ide_dma_test_irq; - } else { - hwif->ide_dma_test_irq = & siimage_io_ide_dma_test_irq; - } -} +static struct ide_dma_ops sil_dma_ops = { + .dma_test_irq = siimage_dma_test_irq, +}; -#define DECLARE_SII_DEV(name_str) \ +#define DECLARE_SII_DEV(name_str, p_ops) \ { \ .name = name_str, \ .init_chipset = init_chipset_siimage, \ .init_iops = init_iops_siimage, \ - .init_hwif = init_hwif_siimage, \ - .host_flags = IDE_HFLAG_BOOTABLE, \ + .port_ops = p_ops, \ + .dma_ops = &sil_dma_ops, \ .pio_mask = ATA_PIO4, \ .mwdma_mask = ATA_MWDMA2, \ .udma_mask = ATA_UDMA6, \ } static const struct ide_port_info siimage_chipsets[] __devinitdata = { - /* 0 */ DECLARE_SII_DEV("SiI680"), - /* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA"), - /* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA") + /* 0 */ DECLARE_SII_DEV("SiI680", &sil_pata_port_ops), + /* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA", &sil_sata_port_ops), + /* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA", &sil_sata_port_ops) }; /** @@ -874,7 +815,24 @@ static const struct ide_port_info siimage_chipsets[] __devinitdata = { static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &siimage_chipsets[id->driver_data]); + struct ide_port_info d; + u8 idx = id->driver_data; + + d = siimage_chipsets[idx]; + + if (idx) { + static int first = 1; + + if (first) { + printk(KERN_INFO "siimage: For full SATA support you " + "should use the libata sata_sil module.\n"); + first = 0; + } + + d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA; + } + + return ide_setup_pci_device(dev, &d); } static const struct pci_device_id siimage_pci_tbl[] = { diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 512bb4c1fd5c..4b0b85d8faf5 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -59,10 +59,10 @@ #define ATA_16 0x01 #define ATA_33 0x02 #define ATA_66 0x03 -#define ATA_100a 0x04 // SiS730/SiS550 is ATA100 with ATA66 layout +#define ATA_100a 0x04 /* SiS730/SiS550 is ATA100 with ATA66 layout */ #define ATA_100 0x05 -#define ATA_133a 0x06 // SiS961b with 133 support -#define ATA_133 0x07 // SiS962/963 +#define ATA_133a 0x06 /* SiS961b with 133 support */ +#define ATA_133 0x07 /* SiS962/963 */ static u8 chipset_family; @@ -111,69 +111,70 @@ static const struct { Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */ /* {0, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */ -static u8 cycle_time_offset[] = {0,0,5,4,4,0,0}; -static u8 cycle_time_range[] = {0,0,2,3,3,4,4}; +static u8 cycle_time_offset[] = { 0, 0, 5, 4, 4, 0, 0 }; +static u8 cycle_time_range[] = { 0, 0, 2, 3, 3, 4, 4 }; static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = { - {0,0,0,0,0,0,0}, /* no udma */ - {0,0,0,0,0,0,0}, /* no udma */ - {3,2,1,0,0,0,0}, /* ATA_33 */ - {7,5,3,2,1,0,0}, /* ATA_66 */ - {7,5,3,2,1,0,0}, /* ATA_100a (730 specific), differences are on cycle_time range and offset */ - {11,7,5,4,2,1,0}, /* ATA_100 */ - {15,10,7,5,3,2,1}, /* ATA_133a (earliest 691 southbridges) */ - {15,10,7,5,3,2,1}, /* ATA_133 */ + { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ + { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ + { 3, 2, 1, 0, 0, 0, 0 }, /* ATA_33 */ + { 7, 5, 3, 2, 1, 0, 0 }, /* ATA_66 */ + { 7, 5, 3, 2, 1, 0, 0 }, /* ATA_100a (730 specific), + different cycle_time range and offset */ + { 11, 7, 5, 4, 2, 1, 0 }, /* ATA_100 */ + { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133a (earliest 691 southbridges) */ + { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133 */ }; /* CRC Valid Setup Time vary across IDE clock setting 33/66/100/133 See SiS962 data sheet for more detail */ static u8 cvs_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = { - {0,0,0,0,0,0,0}, /* no udma */ - {0,0,0,0,0,0,0}, /* no udma */ - {2,1,1,0,0,0,0}, - {4,3,2,1,0,0,0}, - {4,3,2,1,0,0,0}, - {6,4,3,1,1,1,0}, - {9,6,4,2,2,2,2}, - {9,6,4,2,2,2,2}, + { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ + { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */ + { 2, 1, 1, 0, 0, 0, 0 }, + { 4, 3, 2, 1, 0, 0, 0 }, + { 4, 3, 2, 1, 0, 0, 0 }, + { 6, 4, 3, 1, 1, 1, 0 }, + { 9, 6, 4, 2, 2, 2, 2 }, + { 9, 6, 4, 2, 2, 2, 2 }, }; /* Initialize time, Active time, Recovery time vary across IDE clock settings. These 3 arrays hold the register value for PIO0/1/2/3/4 and DMA0/1/2 mode in order */ static u8 ini_time_value[][8] = { - {0,0,0,0,0,0,0,0}, - {0,0,0,0,0,0,0,0}, - {2,1,0,0,0,1,0,0}, - {4,3,1,1,1,3,1,1}, - {4,3,1,1,1,3,1,1}, - {6,4,2,2,2,4,2,2}, - {9,6,3,3,3,6,3,3}, - {9,6,3,3,3,6,3,3}, + { 0, 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0, 0 }, + { 2, 1, 0, 0, 0, 1, 0, 0 }, + { 4, 3, 1, 1, 1, 3, 1, 1 }, + { 4, 3, 1, 1, 1, 3, 1, 1 }, + { 6, 4, 2, 2, 2, 4, 2, 2 }, + { 9, 6, 3, 3, 3, 6, 3, 3 }, + { 9, 6, 3, 3, 3, 6, 3, 3 }, }; static u8 act_time_value[][8] = { - {0,0,0,0,0,0,0,0}, - {0,0,0,0,0,0,0,0}, - {9,9,9,2,2,7,2,2}, - {19,19,19,5,4,14,5,4}, - {19,19,19,5,4,14,5,4}, - {28,28,28,7,6,21,7,6}, - {38,38,38,10,9,28,10,9}, - {38,38,38,10,9,28,10,9}, + { 0, 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0, 0 }, + { 9, 9, 9, 2, 2, 7, 2, 2 }, + { 19, 19, 19, 5, 4, 14, 5, 4 }, + { 19, 19, 19, 5, 4, 14, 5, 4 }, + { 28, 28, 28, 7, 6, 21, 7, 6 }, + { 38, 38, 38, 10, 9, 28, 10, 9 }, + { 38, 38, 38, 10, 9, 28, 10, 9 }, }; static u8 rco_time_value[][8] = { - {0,0,0,0,0,0,0,0}, - {0,0,0,0,0,0,0,0}, - {9,2,0,2,0,7,1,1}, - {19,5,1,5,2,16,3,2}, - {19,5,1,5,2,16,3,2}, - {30,9,3,9,4,25,6,4}, - {40,12,4,12,5,34,12,5}, - {40,12,4,12,5,34,12,5}, + { 0, 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0, 0 }, + { 9, 2, 0, 2, 0, 7, 1, 1 }, + { 19, 5, 1, 5, 2, 16, 3, 2 }, + { 19, 5, 1, 5, 2, 16, 3, 2 }, + { 30, 9, 3, 9, 4, 25, 6, 4 }, + { 40, 12, 4, 12, 5, 34, 12, 5 }, + { 40, 12, 4, 12, 5, 34, 12, 5 }, }; /* * Printing configuration */ /* Used for chipset type printing at boot time */ -static char* chipset_capability[] = { +static char *chipset_capability[] = { "ATA", "ATA 16", "ATA 33", "ATA 66", "ATA 100 (1st gen)", "ATA 100 (2nd gen)", @@ -272,7 +273,7 @@ static void sis_program_timings(ide_drive_t *drive, const u8 mode) sis_ata133_program_timings(drive, mode); } -static void config_drive_art_rwp (ide_drive_t *drive) +static void config_drive_art_rwp(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -346,7 +347,7 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) sis_program_timings(drive, speed); } -static u8 sis5513_ata133_udma_filter(ide_drive_t *drive) +static u8 sis_ata133_udma_filter(ide_drive_t *drive) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); u32 regdw = 0; @@ -358,8 +359,7 @@ static u8 sis5513_ata133_udma_filter(ide_drive_t *drive) return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5; } -/* Chip detection and general config */ -static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const char *name) +static int __devinit sis_find_family(struct pci_dev *dev) { struct pci_dev *host; int i = 0; @@ -381,7 +381,7 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c chipset_family = ATA_100a; } pci_dev_put(host); - + printk(KERN_INFO "SIS5513: %s %s controller\n", SiSHostChipInfo[i].name, chipset_capability[chipset_family]); } @@ -440,63 +440,60 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c } } - if (!chipset_family) - return -1; + return chipset_family; +} +static unsigned int __devinit init_chipset_sis5513(struct pci_dev *dev, + const char *name) +{ /* Make general config ops here 1/ tell IDE channels to operate in Compatibility mode only 2/ tell old chips to allow per drive IDE timings */ - { - u8 reg; - u16 regw; - - switch(chipset_family) { - case ATA_133: - /* SiS962 operation mode */ - pci_read_config_word(dev, 0x50, ®w); - if (regw & 0x08) - pci_write_config_word(dev, 0x50, regw&0xfff7); - pci_read_config_word(dev, 0x52, ®w); - if (regw & 0x08) - pci_write_config_word(dev, 0x52, regw&0xfff7); - break; - case ATA_133a: - case ATA_100: - /* Fixup latency */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80); - /* Set compatibility bit */ - pci_read_config_byte(dev, 0x49, ®); - if (!(reg & 0x01)) { - pci_write_config_byte(dev, 0x49, reg|0x01); - } - break; - case ATA_100a: - case ATA_66: - /* Fixup latency */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10); - - /* On ATA_66 chips the bit was elsewhere */ - pci_read_config_byte(dev, 0x52, ®); - if (!(reg & 0x04)) { - pci_write_config_byte(dev, 0x52, reg|0x04); - } - break; - case ATA_33: - /* On ATA_33 we didn't have a single bit to set */ - pci_read_config_byte(dev, 0x09, ®); - if ((reg & 0x0f) != 0x00) { - pci_write_config_byte(dev, 0x09, reg&0xf0); - } - case ATA_16: - /* force per drive recovery and active timings - needed on ATA_33 and below chips */ - pci_read_config_byte(dev, 0x52, ®); - if (!(reg & 0x08)) { - pci_write_config_byte(dev, 0x52, reg|0x08); - } - break; - } + u8 reg; + u16 regw; + + switch (chipset_family) { + case ATA_133: + /* SiS962 operation mode */ + pci_read_config_word(dev, 0x50, ®w); + if (regw & 0x08) + pci_write_config_word(dev, 0x50, regw&0xfff7); + pci_read_config_word(dev, 0x52, ®w); + if (regw & 0x08) + pci_write_config_word(dev, 0x52, regw&0xfff7); + break; + case ATA_133a: + case ATA_100: + /* Fixup latency */ + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80); + /* Set compatibility bit */ + pci_read_config_byte(dev, 0x49, ®); + if (!(reg & 0x01)) + pci_write_config_byte(dev, 0x49, reg|0x01); + break; + case ATA_100a: + case ATA_66: + /* Fixup latency */ + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10); + + /* On ATA_66 chips the bit was elsewhere */ + pci_read_config_byte(dev, 0x52, ®); + if (!(reg & 0x04)) + pci_write_config_byte(dev, 0x52, reg|0x04); + break; + case ATA_33: + /* On ATA_33 we didn't have a single bit to set */ + pci_read_config_byte(dev, 0x09, ®); + if ((reg & 0x0f) != 0x00) + pci_write_config_byte(dev, 0x09, reg&0xf0); + case ATA_16: + /* force per drive recovery and active timings + needed on ATA_33 and below chips */ + pci_read_config_byte(dev, 0x52, ®); + if (!(reg & 0x08)) + pci_write_config_byte(dev, 0x52, reg|0x08); + break; } return 0; @@ -517,7 +514,7 @@ static const struct sis_laptop sis_laptop[] = { { 0, } }; -static u8 __devinit ata66_sis5513(ide_hwif_t *hwif) +static u8 __devinit sis_cable_detect(ide_hwif_t *hwif) { struct pci_dev *pdev = to_pci_dev(hwif->dev); const struct sis_laptop *lap = &sis_laptop[0]; @@ -546,38 +543,44 @@ static u8 __devinit ata66_sis5513(ide_hwif_t *hwif) return ata66 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; } -static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) -{ - u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f }; - - hwif->set_pio_mode = &sis_set_pio_mode; - hwif->set_dma_mode = &sis_set_dma_mode; - - if (chipset_family >= ATA_133) - hwif->udma_filter = sis5513_ata133_udma_filter; - - hwif->cable_detect = ata66_sis5513; - - if (hwif->dma_base == 0) - return; +static const struct ide_port_ops sis_port_ops = { + .set_pio_mode = sis_set_pio_mode, + .set_dma_mode = sis_set_dma_mode, + .cable_detect = sis_cable_detect, +}; - hwif->ultra_mask = udma_rates[chipset_family]; -} +static const struct ide_port_ops sis_ata133_port_ops = { + .set_pio_mode = sis_set_pio_mode, + .set_dma_mode = sis_set_dma_mode, + .udma_filter = sis_ata133_udma_filter, + .cable_detect = sis_cable_detect, +}; static const struct ide_port_info sis5513_chipset __devinitdata = { .name = "SIS5513", .init_chipset = init_chipset_sis5513, - .init_hwif = init_hwif_sis5513, - .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, - .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA | - IDE_HFLAG_BOOTABLE, + .enablebits = { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} }, + .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, }; static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &sis5513_chipset); + struct ide_port_info d = sis5513_chipset; + u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f }; + + if (sis_find_family(dev) == 0) + return -ENOTSUPP; + + if (chipset_family >= ATA_133) + d.port_ops = &sis_ata133_port_ops; + else + d.port_ops = &sis_port_ops; + + d.udma_mask = udma_rates[chipset_family]; + + return ide_setup_pci_device(dev, &d); } static const struct pci_device_id sis5513_pci_tbl[] = { diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index ee261ae15b6f..ce84fa045d39 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -179,7 +179,7 @@ static void sl82c105_dma_start(ide_drive_t *drive) struct pci_dev *dev = to_pci_dev(hwif->dev); int reg = 0x44 + drive->dn * 4; - DBG(("%s(drive:%s)\n", __FUNCTION__, drive->name)); + DBG(("%s(drive:%s)\n", __func__, drive->name)); pci_write_config_word(dev, reg, drive->drive_data >> 16); @@ -203,7 +203,7 @@ static int sl82c105_dma_end(ide_drive_t *drive) int reg = 0x44 + drive->dn * 4; int ret; - DBG(("%s(drive:%s)\n", __FUNCTION__, drive->name)); + DBG(("%s(drive:%s)\n", __func__, drive->name)); ret = __ide_dma_end(drive); @@ -232,7 +232,7 @@ static void sl82c105_resetproc(ide_drive_t *drive) * Return the revision of the Winbond bridge * which this function is part of. */ -static unsigned int sl82c105_bridge_revision(struct pci_dev *dev) +static u8 sl82c105_bridge_revision(struct pci_dev *dev) { struct pci_dev *bridge; @@ -282,60 +282,59 @@ static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const c return dev->irq; } -/* - * Initialise IDE channel - */ -static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - unsigned int rev; - - DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index)); - - hwif->set_pio_mode = &sl82c105_set_pio_mode; - hwif->set_dma_mode = &sl82c105_set_dma_mode; - hwif->resetproc = &sl82c105_resetproc; - - if (!hwif->dma_base) - return; - - rev = sl82c105_bridge_revision(dev); - if (rev <= 5) { - /* - * Never ever EVER under any circumstances enable - * DMA when the bridge is this old. - */ - printk(" %s: Winbond W83C553 bridge revision %d, " - "BM-DMA disabled\n", hwif->name, rev); - return; - } - - hwif->mwdma_mask = ATA_MWDMA2; - - hwif->dma_lost_irq = &sl82c105_dma_lost_irq; - hwif->dma_start = &sl82c105_dma_start; - hwif->ide_dma_end = &sl82c105_dma_end; - hwif->dma_timeout = &sl82c105_dma_timeout; +static const struct ide_port_ops sl82c105_port_ops = { + .set_pio_mode = sl82c105_set_pio_mode, + .set_dma_mode = sl82c105_set_dma_mode, + .resetproc = sl82c105_resetproc, +}; - if (hwif->mate) - hwif->serialized = hwif->mate->serialized = 1; -} +static const struct ide_dma_ops sl82c105_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = sl82c105_dma_start, + .dma_end = sl82c105_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = sl82c105_dma_lost_irq, + .dma_timeout = sl82c105_dma_timeout, +}; static const struct ide_port_info sl82c105_chipset __devinitdata = { .name = "W82C105", .init_chipset = init_chipset_sl82c105, - .init_hwif = init_hwif_sl82c105, .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}}, + .port_ops = &sl82c105_port_ops, + .dma_ops = &sl82c105_dma_ops, .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS | - IDE_HFLAG_NO_AUTODMA | - IDE_HFLAG_BOOTABLE, +/* FIXME: check for Compatibility mode in generic IDE PCI code */ +#if defined(CONFIG_LOPEC) || defined(CONFIG_SANDPOINT) + IDE_HFLAG_FORCE_LEGACY_IRQS | +#endif + IDE_HFLAG_SERIALIZE_DMA | + IDE_HFLAG_NO_AUTODMA, .pio_mask = ATA_PIO5, + .mwdma_mask = ATA_MWDMA2, }; static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &sl82c105_chipset); + struct ide_port_info d = sl82c105_chipset; + u8 rev = sl82c105_bridge_revision(dev); + + if (rev <= 5) { + /* + * Never ever EVER under any circumstances enable + * DMA when the bridge is this old. + */ + printk(KERN_INFO "W82C105_IDE: Winbond W83C553 bridge " + "revision %d, BM-DMA disabled\n", rev); + d.dma_ops = NULL; + d.mwdma_mask = 0; + d.host_flags &= ~IDE_HFLAG_SERIALIZE_DMA; + } + + return ide_setup_pci_device(dev, &d); } static const struct pci_device_id sl82c105_pci_tbl[] = { diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index 65f4c2ffaa59..dae6e2c94d86 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c @@ -27,9 +27,9 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) unsigned long flags; u16 master_data; u8 slave_data; - int control = 0; + int control = 0; /* ISP RTC */ - static const u8 timings[][2]= { + static const u8 timings[][2] = { { 0, 0 }, { 0, 0 }, { 1, 0 }, @@ -125,19 +125,17 @@ static u8 __devinit slc90e66_cable_detect(ide_hwif_t *hwif) return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; } -static void __devinit init_hwif_slc90e66(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &slc90e66_set_pio_mode; - hwif->set_dma_mode = &slc90e66_set_dma_mode; - - hwif->cable_detect = slc90e66_cable_detect; -} +static const struct ide_port_ops slc90e66_port_ops = { + .set_pio_mode = slc90e66_set_pio_mode, + .set_dma_mode = slc90e66_set_dma_mode, + .cable_detect = slc90e66_cable_detect, +}; static const struct ide_port_info slc90e66_chipset __devinitdata = { .name = "SLC90E66", - .init_hwif = init_hwif_slc90e66, - .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, - .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE, + .enablebits = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} }, + .port_ops = &slc90e66_port_ops, + .host_flags = IDE_HFLAG_LEGACY_IRQS, .pio_mask = ATA_PIO4, .swdma_mask = ATA_SWDMA2_ONLY, .mwdma_mask = ATA_MWDMA12_ONLY, diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c index 2ef2ed2f2b32..9b4b27a4c711 100644 --- a/drivers/ide/pci/tc86c001.c +++ b/drivers/ide/pci/tc86c001.c @@ -18,20 +18,20 @@ static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed) u16 mode, scr = inw(scr_port); switch (speed) { - case XFER_UDMA_4: mode = 0x00c0; break; - case XFER_UDMA_3: mode = 0x00b0; break; - case XFER_UDMA_2: mode = 0x00a0; break; - case XFER_UDMA_1: mode = 0x0090; break; - case XFER_UDMA_0: mode = 0x0080; break; - case XFER_MW_DMA_2: mode = 0x0070; break; - case XFER_MW_DMA_1: mode = 0x0060; break; - case XFER_MW_DMA_0: mode = 0x0050; break; - case XFER_PIO_4: mode = 0x0400; break; - case XFER_PIO_3: mode = 0x0300; break; - case XFER_PIO_2: mode = 0x0200; break; - case XFER_PIO_1: mode = 0x0100; break; - case XFER_PIO_0: - default: mode = 0x0000; break; + case XFER_UDMA_4: mode = 0x00c0; break; + case XFER_UDMA_3: mode = 0x00b0; break; + case XFER_UDMA_2: mode = 0x00a0; break; + case XFER_UDMA_1: mode = 0x0090; break; + case XFER_UDMA_0: mode = 0x0080; break; + case XFER_MW_DMA_2: mode = 0x0070; break; + case XFER_MW_DMA_1: mode = 0x0060; break; + case XFER_MW_DMA_0: mode = 0x0050; break; + case XFER_PIO_4: mode = 0x0400; break; + case XFER_PIO_3: mode = 0x0300; break; + case XFER_PIO_2: mode = 0x0200; break; + case XFER_PIO_1: mode = 0x0100; break; + case XFER_PIO_0: + default: mode = 0x0000; break; } scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f; @@ -126,40 +126,6 @@ static void tc86c001_dma_start(ide_drive_t *drive) ide_dma_start(drive); } -static int tc86c001_busproc(ide_drive_t *drive, int state) -{ - ide_hwif_t *hwif = HWIF(drive); - unsigned long sc_base = hwif->config_data; - u16 scr1; - - /* System Control 1 Register bit 11 (ATA Hard Reset) read */ - scr1 = inw(sc_base + 0x00); - - switch (state) { - case BUSSTATE_ON: - if (!(scr1 & 0x0800)) - return 0; - scr1 &= ~0x0800; - - hwif->drives[0].failures = hwif->drives[1].failures = 0; - break; - case BUSSTATE_OFF: - if (scr1 & 0x0800) - return 0; - scr1 |= 0x0800; - - hwif->drives[0].failures = hwif->drives[0].max_failures + 1; - hwif->drives[1].failures = hwif->drives[1].max_failures + 1; - break; - default: - return -EINVAL; - } - - /* System Control 1 Register bit 11 (ATA Hard Reset) write */ - outw(scr1, sc_base + 0x00); - return 0; -} - static u8 __devinit tc86c001_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -191,13 +157,6 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) /* Store the system control register base for convenience... */ hwif->config_data = sc_base; - hwif->set_pio_mode = &tc86c001_set_pio_mode; - hwif->set_dma_mode = &tc86c001_set_mode; - - hwif->busproc = &tc86c001_busproc; - - hwif->cable_detect = tc86c001_cable_detect; - if (!hwif->dma_base) return; @@ -209,8 +168,6 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) /* Sector Count Register limit */ hwif->rqsize = 0xffff; - - hwif->dma_start = &tc86c001_dma_start; } static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev, @@ -223,10 +180,29 @@ static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev, return err; } +static const struct ide_port_ops tc86c001_port_ops = { + .set_pio_mode = tc86c001_set_pio_mode, + .set_dma_mode = tc86c001_set_mode, + .cable_detect = tc86c001_cable_detect, +}; + +static const struct ide_dma_ops tc86c001_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, + .dma_start = tc86c001_dma_start, + .dma_end = __ide_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + static const struct ide_port_info tc86c001_chipset __devinitdata = { .name = "TC86C001", .init_chipset = init_chipset_tc86c001, .init_hwif = init_hwif_tc86c001, + .port_ops = &tc86c001_port_ops, + .dma_ops = &tc86c001_dma_ops, .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD | IDE_HFLAG_ABUSE_SET_DMA_MODE, .pio_mask = ATA_PIO4, diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c index a67d02a3f96e..db65a558d4ec 100644 --- a/drivers/ide/pci/triflex.c +++ b/drivers/ide/pci/triflex.c @@ -87,17 +87,15 @@ static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio) triflex_set_mode(drive, XFER_PIO_0 + pio); } -static void __devinit init_hwif_triflex(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &triflex_set_pio_mode; - hwif->set_dma_mode = &triflex_set_mode; -} +static const struct ide_port_ops triflex_port_ops = { + .set_pio_mode = triflex_set_pio_mode, + .set_dma_mode = triflex_set_mode, +}; static const struct ide_port_info triflex_device __devinitdata = { .name = "TRIFLEX", - .init_hwif = init_hwif_triflex, .enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}}, - .host_flags = IDE_HFLAG_BOOTABLE, + .port_ops = &triflex_port_ops, .pio_mask = ATA_PIO4, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c index de750f7a43e9..15ee38f7ad3f 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/pci/trm290.c @@ -214,7 +214,7 @@ static void trm290_dma_start(ide_drive_t *drive) { } -static int trm290_ide_dma_end (ide_drive_t *drive) +static int trm290_dma_end(ide_drive_t *drive) { u16 status; @@ -225,7 +225,7 @@ static int trm290_ide_dma_end (ide_drive_t *drive) return status != 0x00ff; } -static int trm290_ide_dma_test_irq (ide_drive_t *drive) +static int trm290_dma_test_irq(ide_drive_t *drive) { u16 status; @@ -254,22 +254,11 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) hwif->config_data = cfg_base; hwif->dma_base = (cfg_base + 4) ^ (hwif->channel ? 0x80 : 0); - printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx", + printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name, hwif->dma_base, hwif->dma_base + 3); - if (!request_region(hwif->dma_base, 4, hwif->name)) { - printk(KERN_CONT " -- Error, ports in use.\n"); + if (ide_allocate_dma_engine(hwif)) return; - } - - hwif->dmatable_cpu = pci_alloc_consistent(dev, PRD_ENTRIES * PRD_BYTES, - &hwif->dmatable_dma); - if (!hwif->dmatable_cpu) { - printk(KERN_CONT " -- Error, unable to allocate DMA table.\n"); - release_region(hwif->dma_base, 4); - return; - } - printk(KERN_CONT "\n"); local_irq_save(flags); /* put config reg into first byte of hwif->select_data */ @@ -291,14 +280,6 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) /* sharing IRQ with mate */ hwif->irq = hwif->mate->irq; - hwif->dma_host_set = &trm290_dma_host_set; - hwif->dma_setup = &trm290_dma_setup; - hwif->dma_exec_cmd = &trm290_dma_exec_cmd; - hwif->dma_start = &trm290_dma_start; - hwif->ide_dma_end = &trm290_ide_dma_end; - hwif->ide_dma_test_irq = &trm290_ide_dma_test_irq; - - hwif->selectproc = &trm290_selectproc; #if 1 { /* @@ -328,16 +309,32 @@ static void __devinit init_hwif_trm290(ide_hwif_t *hwif) #endif } +static const struct ide_port_ops trm290_port_ops = { + .selectproc = trm290_selectproc, +}; + +static struct ide_dma_ops trm290_dma_ops = { + .dma_host_set = trm290_dma_host_set, + .dma_setup = trm290_dma_setup, + .dma_exec_cmd = trm290_dma_exec_cmd, + .dma_start = trm290_dma_start, + .dma_end = trm290_dma_end, + .dma_test_irq = trm290_dma_test_irq, + .dma_lost_irq = ide_dma_lost_irq, + .dma_timeout = ide_dma_timeout, +}; + static const struct ide_port_info trm290_chipset __devinitdata = { .name = "TRM290", .init_hwif = init_hwif_trm290, .chipset = ide_trm290, + .port_ops = &trm290_port_ops, + .dma_ops = &trm290_dma_ops, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | #if 0 /* play it safe for now */ IDE_HFLAG_TRUST_BIOS_FOR_DMA | #endif IDE_HFLAG_NO_AUTODMA | - IDE_HFLAG_BOOTABLE | IDE_HFLAG_NO_LBA48, }; diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 9004e7521889..9460fb08c164 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -340,7 +340,7 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const * Determine system bus clock. */ - via_clock = system_bus_clock() * 1000; + via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000; switch (via_clock) { case 33000: via_clock = 33333; break; @@ -415,25 +415,21 @@ static u8 __devinit via82cxxx_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA40; } -static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) -{ - hwif->set_pio_mode = &via_set_pio_mode; - hwif->set_dma_mode = &via_set_drive; - - hwif->cable_detect = via82cxxx_cable_detect; -} +static const struct ide_port_ops via_port_ops = { + .set_pio_mode = via_set_pio_mode, + .set_dma_mode = via_set_drive, + .cable_detect = via82cxxx_cable_detect, +}; static const struct ide_port_info via82cxxx_chipset __devinitdata = { .name = "VP_IDE", .init_chipset = init_chipset_via82cxxx, - .init_hwif = init_hwif_via82cxxx, .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } }, + .port_ops = &via_port_ops, .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | - IDE_HFLAG_PIO_NO_DOWNGRADE | IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_IO_32BIT | - IDE_HFLAG_BOOTABLE, + IDE_HFLAG_IO_32BIT, .pio_mask = ATA_PIO5, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index 38fbfb8d5445..35d0bf9165bb 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -36,6 +36,8 @@ #include <asm/machdep.h> #include <asm/irq.h> +#define DRV_NAME "ide-mpc8xx" + static int identify (volatile u8 *p); static void print_fixed (volatile u8 *p); static void print_funcid (int func); @@ -99,32 +101,6 @@ static int _slot_ = -1; /* will be read from PCMCIA registers */ /* Make clock cycles and always round up */ #define PCMCIA_MK_CLKS( t, T ) (( (t) * ((T)/1000000) + 999U ) / 1000U ) - - -/* - * IDE stuff. - */ -static int -m8xx_ide_default_irq(unsigned long base) -{ -#ifdef CONFIG_BLK_DEV_MPC8xx_IDE - if (base >= MAX_HWIFS) - return 0; - - printk("[%d] m8xx_ide_default_irq %d\n",__LINE__,ioport_dsc[base].irq); - - return (ioport_dsc[base].irq); -#else - return 9; -#endif -} - -static unsigned long -m8xx_ide_default_io_base(int index) -{ - return index; -} - #define M8XX_PCMCIA_CD2(slot) (0x10000000 >> (slot << 4)) #define M8XX_PCMCIA_CD1(slot) (0x08000000 >> (slot << 4)) @@ -149,12 +125,11 @@ static int pcmcia_schlvl = PCMCIA_SCHLVL; */ /* - * m8xx_ide_init_hwif_ports for a direct IDE interface _using_ + * m8xx_ide_init_ports() for a direct IDE interface _using_ + * MPC8xx's internal PCMCIA interface */ #if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) -static void -m8xx_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, - unsigned long ctrl_port, int *irq) +static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) { unsigned long *p = hw->io_ports; int i; @@ -173,8 +148,6 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, unsigned long base; *p = 0; - if (irq) - *irq = 0; pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia)); @@ -211,6 +184,13 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, pcmcia_phy_base, pcmcia_phy_end, pcmcia_phy_end - pcmcia_phy_base); + if (!request_mem_region(pcmcia_phy_base, + pcmcia_phy_end - pcmcia_phy_base, + DRV_NAME)) { + printk(KERN_ERR "%s: resources busy\n", DRV_NAME); + return -EBUSY; + } + pcmcia_base=(unsigned long)ioremap(pcmcia_phy_base, pcmcia_phy_end-pcmcia_phy_base); @@ -248,9 +228,6 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, } } - if (data_port >= MAX_HWIFS) - return; - if (_slot_ == -1) { printk ("PCMCIA slot has not been defined! Using A as default\n"); _slot_ = 0; @@ -268,7 +245,7 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, if (pcmp->pcmc_pipr & (M8XX_PCMCIA_CD1(_slot_)|M8XX_PCMCIA_CD2(_slot_))) { printk ("No card in slot %c: PIPR=%08x\n", 'A' + _slot_, (u32) pcmp->pcmc_pipr); - return; /* No card in slot */ + return -ENODEV; /* No card in slot */ } check_ide_device (pcmcia_base); @@ -292,11 +269,13 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, *p++ = base + ioport_dsc[data_port].reg_off[i]; } - if (irq) { + hw->irq = ioport_dsc[data_port].irq; + hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack; + #ifdef CONFIG_IDE_8xx_PCCARD + { unsigned int reg; - *irq = ioport_dsc[data_port].irq; if (_slot_) pgcrx = &((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pgcrb; else @@ -306,14 +285,8 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, reg |= mk_int_int_mask (pcmcia_schlvl) << 24; reg |= mk_int_int_mask (pcmcia_schlvl) << 16; *pgcrx = reg; -#else /* direct connected IDE drive, i.e. external IRQ, not the PCMCIA irq */ - *irq = ioport_dsc[data_port].irq; -#endif /* CONFIG_IDE_8xx_PCCARD */ } - - ide_hwifs[data_port].pio_mask = ATA_PIO4; - ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode; - ide_hwifs[data_port].ack_intr = (ide_ack_intr_t *)ide_interrupt_ack; +#endif /* CONFIG_IDE_8xx_PCCARD */ /* Enable Harddisk Interrupt, * and make it edge sensitive @@ -329,16 +302,17 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, /* Enable falling edge irq */ pcmp->pcmc_per = 0x100000 >> (16 * _slot_); #endif /* CONFIG_IDE_8xx_PCCARD */ -} /* m8xx_ide_init_hwif_ports() using 8xx internal PCMCIA interface */ + + return 0; +} #endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */ /* - * m8xx_ide_init_hwif_ports for a direct IDE interface _not_ using + * m8xx_ide_init_ports() for a direct IDE interface _not_ using * MPC8xx's internal PCMCIA interface */ #if defined(CONFIG_IDE_EXT_DIRECT) -void m8xx_ide_init_hwif_ports (hw_regs_t *hw, - unsigned long data_port, unsigned long ctrl_port, int *irq) +static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) { unsigned long *p = hw->io_ports; int i; @@ -349,8 +323,6 @@ void m8xx_ide_init_hwif_ports (hw_regs_t *hw, unsigned long base; *p = 0; - if (irq) - *irq = 0; if (!ide_base) { @@ -363,7 +335,12 @@ void m8xx_ide_init_hwif_ports (hw_regs_t *hw, printk ("IDE phys mem : %08x...%08x (size %08x)\n", ide_phy_base, ide_phy_end, ide_phy_end - ide_phy_base); - + + if (!request_mem_region(ide_phy_base, 0x200, DRV_NAME)) { + printk(KERN_ERR "%s: resources busy\n", DRV_NAME); + return -EBUSY; + } + ide_base=(unsigned long)ioremap(ide_phy_base, ide_phy_end-ide_phy_base); @@ -372,9 +349,6 @@ void m8xx_ide_init_hwif_ports (hw_regs_t *hw, #endif } - if (data_port >= MAX_HWIFS) - return; - base = ide_base + ioport_dsc[data_port].base_off; #ifdef DEBUG printk ("base: %08x + %08x = %08x\n", @@ -392,14 +366,9 @@ void m8xx_ide_init_hwif_ports (hw_regs_t *hw, *p++ = base + ioport_dsc[data_port].reg_off[i]; } - if (irq) { - /* direct connected IDE drive, i.e. external IRQ */ - *irq = ioport_dsc[data_port].irq; - } - - ide_hwifs[data_port].pio_mask = ATA_PIO4; - ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode; - ide_hwifs[data_port].ack_intr = (ide_ack_intr_t *)ide_interrupt_ack; + /* direct connected IDE drive, i.e. external IRQ */ + hw->irq = ioport_dsc[data_port].irq; + hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack; /* Enable Harddisk Interrupt, * and make it edge sensitive @@ -407,8 +376,9 @@ void m8xx_ide_init_hwif_ports (hw_regs_t *hw, /* (11-18) Set edge detect for irq, no wakeup from low power mode */ ((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |= (0x80000000 >> ioport_dsc[data_port].irq); -} /* m8xx_ide_init_hwif_ports() for CONFIG_IDE_8xx_DIRECT */ + return 0; +} #endif /* CONFIG_IDE_8xx_DIRECT */ @@ -468,10 +438,14 @@ static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) #elif defined(CONFIG_IDE_EXT_DIRECT) printk("%s[%d] %s: not implemented yet!\n", - __FILE__,__LINE__,__FUNCTION__); + __FILE__, __LINE__, __func__); #endif /* defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_PCMCIA */ } +static const struct ide_port_ops m8xx_port_ops = { + .set_pio_mode = m8xx_ide_set_pio_mode, +}; + static void ide_interrupt_ack (void *dev) { @@ -829,21 +803,37 @@ static int identify (volatile u8 *p) return (0); /* don't know */ } -void m8xx_ide_init(void) -{ - ppc_ide_md.default_irq = m8xx_ide_default_irq; - ppc_ide_md.default_io_base = m8xx_ide_default_io_base; - ppc_ide_md.ide_init_hwif = m8xx_ide_init_hwif_ports; -} - static int __init mpc8xx_ide_probe(void) { + hw_regs_t hw; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; #ifdef IDE0_BASE_OFFSET - idx[0] = 0; + memset(&hw, 0, sizeof(hw)); + if (!m8xx_ide_init_ports(&hw, 0)) { + ide_hwif_t *hwif = ide_find_port(); + + if (hwif) { + ide_init_port_hw(hwif, &hw); + hwif->pio_mask = ATA_PIO4; + hwif->port_ops = &m8xx_port_ops; + + idx[0] = hwif->index; + } + } #ifdef IDE1_BASE_OFFSET - idx[1] = 1; + memset(&hw, 0, sizeof(hw)); + if (!m8xx_ide_init_ports(&hw, 1)) { + ide_hwif_t *mate = ide_find_port(); + + if (mate) { + ide_init_port_hw(mate, &hw); + mate->pio_mask = ATA_PIO4; + mate->port_ops = &m8xx_port_ops; + + idx[1] = mate->index; + } + } #endif #endif diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 78c9eeb85634..8d65cc846988 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -79,9 +79,6 @@ typedef struct pmac_ide_hwif { } pmac_ide_hwif_t; -static pmac_ide_hwif_t pmac_ide[MAX_HWIFS]; -static int pmac_ide_count; - enum { controller_ohare, /* OHare based */ controller_heathrow, /* Heathrow/Paddington */ @@ -412,45 +409,15 @@ kauai_lookup_timing(struct kauai_timing* table, int cycle_time) */ #define IDE_WAKEUP_DELAY (1*HZ) -static int pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif); +static int pmac_ide_init_dma(ide_hwif_t *, const struct ide_port_info *); static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq); static void pmac_ide_selectproc(ide_drive_t *drive); static void pmac_ide_kauai_selectproc(ide_drive_t *drive); #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ -/* - * N.B. this can't be an initfunc, because the media-bay task can - * call ide_[un]register at any time. - */ -void -pmac_ide_init_hwif_ports(hw_regs_t *hw, - unsigned long data_port, unsigned long ctrl_port, - int *irq) -{ - int i, ix; - - if (data_port == 0) - return; - - for (ix = 0; ix < MAX_HWIFS; ++ix) - if (data_port == pmac_ide[ix].regbase) - break; - - if (ix >= MAX_HWIFS) - return; /* not an IDE PMAC interface */ - - for (i = 0; i < 8; ++i) - hw->io_ports[i] = data_port + i * 0x10; - hw->io_ports[8] = data_port + 0x160; - - if (irq != NULL) - *irq = pmac_ide[ix].irq; - - hw->dev = &pmac_ide[ix].mdev->ofdev.dev; -} - -#define PMAC_IDE_REG(x) ((void __iomem *)(IDE_DATA_REG+(x))) +#define PMAC_IDE_REG(x) \ + ((void __iomem *)((drive)->hwif->io_ports[IDE_DATA_OFFSET] + (x))) /* * Apply the timings of the proper unit (master/slave) to the shared @@ -886,58 +853,6 @@ sanitize_timings(pmac_ide_hwif_t *pmif) pmif->timings[2] = pmif->timings[3] = value2; } -unsigned long -pmac_ide_get_base(int index) -{ - return pmac_ide[index].regbase; -} - -int -pmac_ide_check_base(unsigned long base) -{ - int ix; - - for (ix = 0; ix < MAX_HWIFS; ++ix) - if (base == pmac_ide[ix].regbase) - return ix; - return -1; -} - -int -pmac_ide_get_irq(unsigned long base) -{ - int ix; - - for (ix = 0; ix < MAX_HWIFS; ++ix) - if (base == pmac_ide[ix].regbase) - return pmac_ide[ix].irq; - return 0; -} - -static int ide_majors[] = { 3, 22, 33, 34, 56, 57 }; - -dev_t __init -pmac_find_ide_boot(char *bootdevice, int n) -{ - int i; - - /* - * Look through the list of IDE interfaces for this one. - */ - for (i = 0; i < pmac_ide_count; ++i) { - char *name; - if (!pmac_ide[i].node || !pmac_ide[i].node->full_name) - continue; - name = pmac_ide[i].node->full_name; - if (memcmp(name, bootdevice, n) == 0 && name[n] == 0) { - /* XXX should cope with the 2nd drive as well... */ - return MKDEV(ide_majors[i], 0); - } - } - - return 0; -} - /* Suspend call back, should be called after the child devices * have actually been suspended */ @@ -1003,12 +918,29 @@ pmac_ide_do_resume(ide_hwif_t *hwif) return 0; } +static const struct ide_port_ops pmac_ide_ata6_port_ops = { + .set_pio_mode = pmac_ide_set_pio_mode, + .set_dma_mode = pmac_ide_set_dma_mode, + .selectproc = pmac_ide_kauai_selectproc, +}; + +static const struct ide_port_ops pmac_ide_port_ops = { + .set_pio_mode = pmac_ide_set_pio_mode, + .set_dma_mode = pmac_ide_set_dma_mode, + .selectproc = pmac_ide_selectproc, +}; + +static const struct ide_dma_ops pmac_dma_ops; + static const struct ide_port_info pmac_port_info = { + .init_dma = pmac_ide_init_dma, .chipset = ide_pmac, +#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + .dma_ops = &pmac_dma_ops, +#endif + .port_ops = &pmac_ide_port_ops, .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | - IDE_HFLAG_PIO_NO_DOWNGRADE | IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ IDE_HFLAG_UNMASK_IRQS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, @@ -1033,12 +965,15 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) pmif->broken_dma = pmif->broken_dma_warn = 0; if (of_device_is_compatible(np, "shasta-ata")) { pmif->kind = controller_sh_ata6; + d.port_ops = &pmac_ide_ata6_port_ops; d.udma_mask = ATA_UDMA6; } else if (of_device_is_compatible(np, "kauai-ata")) { pmif->kind = controller_un_ata6; + d.port_ops = &pmac_ide_ata6_port_ops; d.udma_mask = ATA_UDMA5; } else if (of_device_is_compatible(np, "K2-UATA")) { pmif->kind = controller_k2_ata6; + d.port_ops = &pmac_ide_ata6_port_ops; d.udma_mask = ATA_UDMA5; } else if (of_device_is_compatible(np, "keylargo-ata")) { if (strcmp(np->name, "ata-4") == 0) { @@ -1088,7 +1023,8 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) if (np->parent && np->parent->name && strcasecmp(np->parent->name, "media-bay") == 0) { #ifdef CONFIG_PMAC_MEDIABAY - media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq, hwif->index); + media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq, + hwif); #endif /* CONFIG_PMAC_MEDIABAY */ pmif->mediabay = 1; if (!bidp) @@ -1114,38 +1050,29 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) default_hwif_mmiops(hwif); hwif->OUTBSYNC = pmac_outbsync; - /* Tell common code _not_ to mess with resources */ - hwif->mmio = 1; hwif->hwif_data = pmif; ide_init_port_hw(hwif, hw); - hwif->noprobe = pmif->mediabay; - hwif->hold = pmif->mediabay; hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; - hwif->set_pio_mode = pmac_ide_set_pio_mode; - if (pmif->kind == controller_un_ata6 - || pmif->kind == controller_k2_ata6 - || pmif->kind == controller_sh_ata6) - hwif->selectproc = pmac_ide_kauai_selectproc; - else - hwif->selectproc = pmac_ide_selectproc; - hwif->set_dma_mode = pmac_ide_set_dma_mode; printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, pmif->mediabay ? " (mediabay)" : "", hwif->irq); - + + if (pmif->mediabay) { #ifdef CONFIG_PMAC_MEDIABAY - if (pmif->mediabay && check_media_bay_by_base(pmif->regbase, MB_CD) == 0) - hwif->noprobe = 0; -#endif /* CONFIG_PMAC_MEDIABAY */ + if (check_media_bay_by_base(pmif->regbase, MB_CD)) { +#else + if (1) { +#endif + hwif->drives[0].noprobe = 1; + hwif->drives[1].noprobe = 1; + } + } #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC if (pmif->cable_80 == 0) d.udma_mask &= ATA_UDMA2; - /* has a DBDMA controller channel */ - if (pmif->dma_regs == 0 || pmac_ide_setup_dma(pmif, hwif) < 0) #endif - d.udma_mask = d.mwdma_mask = 0; idx[0] = hwif->index; @@ -1154,6 +1081,15 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) return 0; } +static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base) +{ + int i; + + for (i = 0; i < 8; ++i) + hw->io_ports[i] = base + i * 0x10; + hw->io_ports[8] = base + 0x160; +} + /* * Attach to a macio probed interface */ @@ -1162,35 +1098,36 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) { void __iomem *base; unsigned long regbase; - int irq; ide_hwif_t *hwif; pmac_ide_hwif_t *pmif; - int i, rc; + int irq, rc; hw_regs_t hw; - i = 0; - while (i < MAX_HWIFS && (ide_hwifs[i].io_ports[IDE_DATA_OFFSET] != 0 - || pmac_ide[i].node != NULL)) - ++i; - if (i >= MAX_HWIFS) { + pmif = kzalloc(sizeof(*pmif), GFP_KERNEL); + if (pmif == NULL) + return -ENOMEM; + + hwif = ide_find_port(); + if (hwif == NULL) { printk(KERN_ERR "ide-pmac: MacIO interface attach with no slot\n"); printk(KERN_ERR " %s\n", mdev->ofdev.node->full_name); - return -ENODEV; + rc = -ENODEV; + goto out_free_pmif; } - pmif = &pmac_ide[i]; - hwif = &ide_hwifs[i]; - if (macio_resource_count(mdev) == 0) { - printk(KERN_WARNING "ide%d: no address for %s\n", - i, mdev->ofdev.node->full_name); - return -ENXIO; + printk(KERN_WARNING "ide-pmac: no address for %s\n", + mdev->ofdev.node->full_name); + rc = -ENXIO; + goto out_free_pmif; } /* Request memory resource for IO ports */ if (macio_request_resource(mdev, 0, "ide-pmac (ports)")) { - printk(KERN_ERR "ide%d: can't request mmio resource !\n", i); - return -EBUSY; + printk(KERN_ERR "ide-pmac: can't request MMIO resource for " + "%s!\n", mdev->ofdev.node->full_name); + rc = -EBUSY; + goto out_free_pmif; } /* XXX This is bogus. Should be fixed in the registry by checking @@ -1199,8 +1136,8 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) * where that happens though... */ if (macio_irq_count(mdev) == 0) { - printk(KERN_WARNING "ide%d: no intrs for device %s, using 13\n", - i, mdev->ofdev.node->full_name); + printk(KERN_WARNING "ide-pmac: no intrs for device %s, using " + "13\n", mdev->ofdev.node->full_name); irq = irq_create_mapping(NULL, 13); } else irq = macio_irq(mdev, 0); @@ -1218,7 +1155,9 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC if (macio_resource_count(mdev) >= 2) { if (macio_request_resource(mdev, 1, "ide-pmac (dma)")) - printk(KERN_WARNING "ide%d: can't request DMA resource !\n", i); + printk(KERN_WARNING "ide-pmac: can't request DMA " + "resource for %s!\n", + mdev->ofdev.node->full_name); else pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000); } else @@ -1227,7 +1166,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) dev_set_drvdata(&mdev->ofdev.dev, hwif); memset(&hw, 0, sizeof(hw)); - pmac_ide_init_hwif_ports(&hw, pmif->regbase, 0, NULL); + pmac_ide_init_ports(&hw, pmif->regbase); hw.irq = irq; hw.dev = &mdev->ofdev.dev; @@ -1240,11 +1179,15 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) iounmap(pmif->dma_regs); macio_release_resource(mdev, 1); } - memset(pmif, 0, sizeof(*pmif)); macio_release_resource(mdev, 0); + kfree(pmif); } return rc; + +out_free_pmif: + kfree(pmif); + return rc; } static int @@ -1289,7 +1232,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) pmac_ide_hwif_t *pmif; void __iomem *base; unsigned long rbase, rlen; - int i, rc; + int rc; hw_regs_t hw; np = pci_device_to_OF_node(pdev); @@ -1297,30 +1240,32 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) printk(KERN_ERR "ide-pmac: cannot find MacIO node for Kauai ATA interface\n"); return -ENODEV; } - i = 0; - while (i < MAX_HWIFS && (ide_hwifs[i].io_ports[IDE_DATA_OFFSET] != 0 - || pmac_ide[i].node != NULL)) - ++i; - if (i >= MAX_HWIFS) { + + pmif = kzalloc(sizeof(*pmif), GFP_KERNEL); + if (pmif == NULL) + return -ENOMEM; + + hwif = ide_find_port(); + if (hwif == NULL) { printk(KERN_ERR "ide-pmac: PCI interface attach with no slot\n"); printk(KERN_ERR " %s\n", np->full_name); - return -ENODEV; + rc = -ENODEV; + goto out_free_pmif; } - pmif = &pmac_ide[i]; - hwif = &ide_hwifs[i]; - if (pci_enable_device(pdev)) { - printk(KERN_WARNING "ide%i: Can't enable PCI device for %s\n", - i, np->full_name); - return -ENXIO; + printk(KERN_WARNING "ide-pmac: Can't enable PCI device for " + "%s\n", np->full_name); + rc = -ENXIO; + goto out_free_pmif; } pci_set_master(pdev); if (pci_request_regions(pdev, "Kauai ATA")) { - printk(KERN_ERR "ide%d: Cannot obtain PCI resources for %s\n", - i, np->full_name); - return -ENXIO; + printk(KERN_ERR "ide-pmac: Cannot obtain PCI resources for " + "%s\n", np->full_name); + rc = -ENXIO; + goto out_free_pmif; } hwif->dev = &pdev->dev; @@ -1341,7 +1286,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_drvdata(pdev, hwif); memset(&hw, 0, sizeof(hw)); - pmac_ide_init_hwif_ports(&hw, pmif->regbase, 0, NULL); + pmac_ide_init_ports(&hw, pmif->regbase); hw.irq = pdev->irq; hw.dev = &pdev->dev; @@ -1350,11 +1295,15 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) /* The inteface is released to the common IDE layer */ pci_set_drvdata(pdev, NULL); iounmap(base); - memset(pmif, 0, sizeof(*pmif)); pci_release_regions(pdev); + kfree(pmif); } return rc; + +out_free_pmif: + kfree(pmif); + return rc; } static int @@ -1726,18 +1675,31 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive) printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status); } +static const struct ide_dma_ops pmac_dma_ops = { + .dma_host_set = pmac_ide_dma_host_set, + .dma_setup = pmac_ide_dma_setup, + .dma_exec_cmd = pmac_ide_dma_exec_cmd, + .dma_start = pmac_ide_dma_start, + .dma_end = pmac_ide_dma_end, + .dma_test_irq = pmac_ide_dma_test_irq, + .dma_timeout = ide_dma_timeout, + .dma_lost_irq = pmac_ide_dma_lost_irq, +}; + /* * Allocate the data structures needed for using DMA with an interface * and fill the proper list of functions pointers */ -static int __devinit pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) +static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, + const struct ide_port_info *d) { + pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)hwif->hwif_data; struct pci_dev *dev = to_pci_dev(hwif->dev); /* We won't need pci_dev if we switch to generic consistent * DMA routines ... */ - if (dev == NULL) + if (dev == NULL || pmif->dma_regs == 0) return -ENODEV; /* * Allocate space for the DBDMA commands. @@ -1756,18 +1718,14 @@ static int __devinit pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->sg_max_nents = MAX_DCMDS; - hwif->dma_host_set = &pmac_ide_dma_host_set; - hwif->dma_setup = &pmac_ide_dma_setup; - hwif->dma_exec_cmd = &pmac_ide_dma_exec_cmd; - hwif->dma_start = &pmac_ide_dma_start; - hwif->ide_dma_end = &pmac_ide_dma_end; - hwif->ide_dma_test_irq = &pmac_ide_dma_test_irq; - hwif->dma_timeout = &ide_dma_timeout; - hwif->dma_lost_irq = &pmac_ide_dma_lost_irq; - return 0; } - +#else +static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, + const struct ide_port_info *d) +{ + return -EOPNOTSUPP; +} #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ module_init(pmac_ide_probe); diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 634e3f6a9608..d34569f2c5db 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -20,84 +20,6 @@ #include <asm/io.h> #include <asm/irq.h> - -/** - * ide_match_hwif - match a PCI IDE against an ide_hwif - * @io_base: I/O base of device - * @bootable: set if its bootable - * @name: name of device - * - * Match a PCI IDE port against an entry in ide_hwifs[], - * based on io_base port if possible. Return the matching hwif, - * or a new hwif. If we find an error (clashing, out of devices, etc) - * return NULL - * - * FIXME: we need to handle mmio matches here too - */ - -static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char *name) -{ - int h; - ide_hwif_t *hwif; - - /* - * Look for a hwif with matching io_base specified using - * parameters to ide_setup(). - */ - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) { - if (hwif->chipset == ide_forced) - return hwif; /* a perfect match */ - } - } - /* - * Look for a hwif with matching io_base default value. - * If chipset is "ide_unknown", then claim that hwif slot. - * Otherwise, some other chipset has already claimed it.. :( - */ - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) { - if (hwif->chipset == ide_unknown) - return hwif; /* match */ - printk(KERN_ERR "%s: port 0x%04lx already claimed by %s\n", - name, io_base, hwif->name); - return NULL; /* already claimed */ - } - } - /* - * Okay, there is no hwif matching our io_base, - * so we'll just claim an unassigned slot. - * Give preference to claiming other slots before claiming ide0/ide1, - * just in case there's another interface yet-to-be-scanned - * which uses ports 1f0/170 (the ide0/ide1 defaults). - * - * Unless there is a bootable card that does not use the standard - * ports 1f0/170 (the ide0/ide1 defaults). The (bootable) flag. - */ - if (bootable) { - for (h = 0; h < MAX_HWIFS; ++h) { - hwif = &ide_hwifs[h]; - if (hwif->chipset == ide_unknown) - return hwif; /* pick an unused entry */ - } - } else { - for (h = 2; h < MAX_HWIFS; ++h) { - hwif = ide_hwifs + h; - if (hwif->chipset == ide_unknown) - return hwif; /* pick an unused entry */ - } - } - for (h = 0; h < 2 && h < MAX_HWIFS; ++h) { - hwif = ide_hwifs + h; - if (hwif->chipset == ide_unknown) - return hwif; /* pick an unused entry */ - } - printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", name); - return NULL; -} - /** * ide_setup_pci_baseregs - place a PCI IDE controller native * @dev: PCI device of interface to switch native @@ -105,13 +27,13 @@ static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char * * We attempt to place the PCI interface into PCI native mode. If * we succeed the BARs are ok and the controller is in PCI mode. - * Returns 0 on success or an errno code. + * Returns 0 on success or an errno code. * * FIXME: if we program the interface and then fail to set the BARS * we don't switch it back to legacy mode. Do we actually care ?? */ - -static int ide_setup_pci_baseregs (struct pci_dev *dev, const char *name) + +static int ide_setup_pci_baseregs(struct pci_dev *dev, const char *name) { u8 progif = 0; @@ -150,16 +72,16 @@ static void ide_pci_clear_simplex(unsigned long dma_base, const char *name) } /** - * ide_get_or_set_dma_base - setup BMIBA - * @d: IDE port info + * ide_pci_dma_base - setup BMIBA * @hwif: IDE interface + * @d: IDE port info * * Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space. * Where a device has a partner that is already in DMA mode we check * and enforce IDE simplex rules. */ -static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_hwif_t *hwif) +unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); unsigned long dma_base = 0; @@ -210,6 +132,31 @@ static unsigned long ide_get_or_set_dma_base(const struct ide_port_info *d, ide_ out: return dma_base; } +EXPORT_SYMBOL_GPL(ide_pci_dma_base); + +/* + * Set up BM-DMA capability (PnP BIOS should have done this) + */ +int ide_pci_set_master(struct pci_dev *dev, const char *name) +{ + u16 pcicmd; + + pci_read_config_word(dev, PCI_COMMAND, &pcicmd); + + if ((pcicmd & PCI_COMMAND_MASTER) == 0) { + pci_set_master(dev); + + if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || + (pcicmd & PCI_COMMAND_MASTER) == 0) { + printk(KERN_ERR "%s: error updating PCICMD on %s\n", + name, pci_name(dev)); + return -EIO; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(ide_pci_set_master); #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d) @@ -218,7 +165,6 @@ void ide_setup_pci_noise(struct pci_dev *dev, const struct ide_port_info *d) " PCI slot %s\n", d->name, dev->vendor, dev->device, dev->revision, pci_name(dev)); } - EXPORT_SYMBOL_GPL(ide_setup_pci_noise); @@ -231,13 +177,13 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_noise); * but if that fails then we only need IO space. The PCI code should * have setup the proper resources for us already for controllers in * legacy mode. - * + * * Returns zero on success or an error code */ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) { - int ret; + int ret, bars; if (pci_enable_device(dev)) { ret = pci_enable_device_io(dev); @@ -260,13 +206,21 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d) goto out; } - /* FIXME: Temporary - until we put in the hotplug interface logic - Check that the bits we want are not in use by someone else. */ - ret = pci_request_region(dev, 4, "ide_tmp"); - if (ret < 0) - goto out; + if (d->host_flags & IDE_HFLAG_SINGLE) + bars = (1 << 2) - 1; + else + bars = (1 << 4) - 1; - pci_release_region(dev, 4); + if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) { + if (d->host_flags & IDE_HFLAG_CS5520) + bars |= (1 << 2); + else + bars |= (1 << 4); + } + + ret = pci_request_selected_regions(dev, bars, d->name); + if (ret < 0) + printk(KERN_ERR "%s: can't reserve resources\n", d->name); out: return ret; } @@ -290,8 +244,8 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d) * Maybe the user deliberately *disabled* the device, * but we'll eventually ignore it again if no drives respond. */ - if (ide_setup_pci_baseregs(dev, d->name) || pci_write_config_word(dev, PCI_COMMAND, pcicmd|PCI_COMMAND_IO)) - { + if (ide_setup_pci_baseregs(dev, d->name) || + pci_write_config_word(dev, PCI_COMMAND, pcicmd | PCI_COMMAND_IO)) { printk(KERN_INFO "%s: device disabled (BIOS)\n", d->name); return -ENODEV; } @@ -319,15 +273,15 @@ static int ide_pci_configure(struct pci_dev *dev, const struct ide_port_info *d) static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info *d, int bar) { ulong flags = pci_resource_flags(dev, bar); - + /* Unconfigured ? */ if (!flags || pci_resource_len(dev, bar) == 0) return 0; - /* I/O space */ - if(flags & PCI_BASE_ADDRESS_IO_MASK) + /* I/O space */ + if (flags & PCI_BASE_ADDRESS_IO_MASK) return 0; - + /* Bad */ printk(KERN_ERR "%s: IO baseregs (BIOS) are reported " "as MEM, report to " @@ -355,15 +309,13 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, { unsigned long ctl = 0, base = 0; ide_hwif_t *hwif; - u8 bootable = (d->host_flags & IDE_HFLAG_BOOTABLE) ? 1 : 0; - u8 oldnoprobe = 0; struct hw_regs_s hw; if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) { /* Possibly we should fail if these checks report true */ ide_pci_check_iomem(dev, d, 2*port); ide_pci_check_iomem(dev, d, 2*port+1); - + ctl = pci_resource_start(dev, 2*port+1); base = pci_resource_start(dev, 2*port); if ((ctl && !base) || (base && !ctl)) { @@ -372,31 +324,28 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, return NULL; } } - if (!ctl) - { + if (!ctl) { /* Use default values */ ctl = port ? 0x374 : 0x3f4; base = port ? 0x170 : 0x1f0; } - if ((hwif = ide_match_hwif(base, bootable, d->name)) == NULL) - return NULL; /* no room in ide_hwifs[] */ + + hwif = ide_find_port_slot(d); + if (hwif == NULL) { + printk(KERN_ERR "%s: too many IDE interfaces, no room in " + "table\n", d->name); + return NULL; + } memset(&hw, 0, sizeof(hw)); - hw.irq = hwif->irq ? hwif->irq : irq; + hw.irq = irq; hw.dev = &dev->dev; hw.chipset = d->chipset ? d->chipset : ide_pci; ide_std_init_ports(&hw, base, ctl | 2); - if (hwif->io_ports[IDE_DATA_OFFSET] == base && - hwif->io_ports[IDE_CONTROL_OFFSET] == (ctl | 2)) - oldnoprobe = hwif->noprobe; - ide_init_port_hw(hwif, &hw); - hwif->noprobe = oldnoprobe; - hwif->dev = &dev->dev; - hwif->cds = d; return hwif; } @@ -412,40 +361,33 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, * state */ -void ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) +int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { struct pci_dev *dev = to_pci_dev(hwif->dev); - u16 pcicmd; - - pci_read_config_word(dev, PCI_COMMAND, &pcicmd); if ((d->host_flags & IDE_HFLAG_NO_AUTODMA) == 0 || ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 0x80))) { - unsigned long dma_base = ide_get_or_set_dma_base(d, hwif); - if (dma_base && !(pcicmd & PCI_COMMAND_MASTER)) { - /* - * Set up BM-DMA capability - * (PnP BIOS should have done this) - */ - pci_set_master(dev); - if (pci_read_config_word(dev, PCI_COMMAND, &pcicmd) || !(pcicmd & PCI_COMMAND_MASTER)) { - printk(KERN_ERR "%s: %s error updating PCICMD\n", - hwif->name, d->name); - dma_base = 0; - } - } - if (dma_base) { - if (d->init_dma) { - d->init_dma(hwif, dma_base); - } else { - ide_setup_dma(hwif, dma_base); - } - } else { - printk(KERN_INFO "%s: %s Bus-Master DMA disabled " - "(BIOS)\n", hwif->name, d->name); - } + unsigned long base = ide_pci_dma_base(hwif, d); + + if (base == 0 || ide_pci_set_master(dev, d->name) < 0) + return -1; + + if (hwif->mmio) + printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); + else + printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", + hwif->name, base, base + 7); + + hwif->extra_base = base + (hwif->channel ? 8 : 16); + + if (ide_allocate_dma_engine(hwif)) + return -1; + + ide_setup_dma(hwif, base); } + + return 0; } #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ @@ -532,7 +474,6 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int *(idx + port) = hwif->index; } } - EXPORT_SYMBOL_GPL(ide_pci_setup_ports); /* @@ -615,7 +556,6 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d) return ret; } - EXPORT_SYMBOL_GPL(ide_setup_pci_device); int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, @@ -639,5 +579,4 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, out: return ret; } - EXPORT_SYMBOL_GPL(ide_setup_pci_devices); diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index bd8a1d14b45d..82add26cc665 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -79,6 +79,7 @@ struct media_bay_info { int sleeping; struct semaphore lock; #ifdef CONFIG_BLK_DEV_IDE_PMAC + ide_hwif_t *cd_port; void __iomem *cd_base; int cd_irq; int cd_retry; @@ -448,7 +449,7 @@ int check_media_bay_by_base(unsigned long base, int what) } int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base, - int irq, int index) + int irq, ide_hwif_t *hwif) { int i; @@ -456,10 +457,11 @@ int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base, struct media_bay_info* bay = &media_bays[i]; if (bay->mdev && which_bay == bay->mdev->ofdev.node) { - int timeout = 5000; + int timeout = 5000, index = hwif->index; down(&bay->lock); + bay->cd_port = hwif; bay->cd_base = (void __iomem *) base; bay->cd_irq = irq; @@ -551,15 +553,10 @@ static void media_bay_step(int i) bay->timer = 0; bay->state = mb_up; if (bay->cd_index < 0) { - hw_regs_t hw; - printk("mediabay %d, registering IDE...\n", i); pmu_suspend(); - ide_init_hwif_ports(&hw, (unsigned long) bay->cd_base, (unsigned long) 0, NULL); - hw.irq = bay->cd_irq; - hw.chipset = ide_pmac; - bay->cd_index = - ide_register_hw(&hw, NULL, NULL); + ide_port_scan(bay->cd_port); + bay->cd_index = bay->cd_port->index; pmu_resume(); } if (bay->cd_index == -1) { @@ -589,7 +586,7 @@ static void media_bay_step(int i) if (bay->cd_index >= 0) { printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i, bay->cd_index); - ide_unregister(bay->cd_index, 1, 1); + ide_port_unregister_devices(bay->cd_port); bay->cd_index = -1; } if (bay->cd_retry) { diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 68e5c632c5d5..3638fa808ded 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -60,31 +60,6 @@ #define IDESCSI_DEBUG_LOG 0 -typedef struct idescsi_pc_s { - u8 c[12]; /* Actual packet bytes */ - int request_transfer; /* Bytes to transfer */ - int actually_transferred; /* Bytes actually transferred */ - int buffer_size; /* Size of our data buffer */ - struct request *rq; /* The corresponding request */ - u8 *buffer; /* Data buffer */ - u8 *current_position; /* Pointer into the above buffer */ - struct scatterlist *sg; /* Scatter gather table */ - unsigned int sg_cnt; /* Number of entries in sg */ - int b_count; /* Bytes transferred from current entry */ - struct scsi_cmnd *scsi_cmd; /* SCSI command */ - void (*done)(struct scsi_cmnd *); /* Scsi completion routine */ - unsigned long flags; /* Status/Action flags */ - unsigned long timeout; /* Command timeout */ -} idescsi_pc_t; - -/* - * Packet command status bits. - */ -#define PC_DMA_IN_PROGRESS 0 /* 1 while DMA in progress */ -#define PC_WRITING 1 /* Data direction */ -#define PC_TIMEDOUT 3 /* command timed out */ -#define PC_DMA_OK 4 /* Use DMA */ - /* * SCSI command transformation layer */ @@ -101,14 +76,15 @@ typedef struct ide_scsi_obj { struct gendisk *disk; struct Scsi_Host *host; - idescsi_pc_t *pc; /* Current packet command */ + struct ide_atapi_pc *pc; /* Current packet command */ unsigned long flags; /* Status/Action flags */ unsigned long transform; /* SCSI cmd translation layer */ unsigned long log; /* log flags */ } idescsi_scsi_t; static DEFINE_MUTEX(idescsi_ref_mutex); -static int idescsi_nocd; /* Set by module param to skip cd */ +/* Set by module param to skip cd */ +static int idescsi_nocd; #define ide_scsi_g(disk) \ container_of((disk)->private_data, struct ide_scsi_obj, driver) @@ -152,22 +128,11 @@ static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive) */ #define IDESCSI_PC_RQ 90 -static void idescsi_discard_data (ide_drive_t *drive, unsigned int bcount) -{ - while (bcount--) - (void) HWIF(drive)->INB(IDE_DATA_REG); -} - -static void idescsi_output_zeros (ide_drive_t *drive, unsigned int bcount) -{ - while (bcount--) - HWIF(drive)->OUTB(0, IDE_DATA_REG); -} - /* * PIO data transfer routines using the scatter gather table. */ -static void idescsi_input_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsigned int bcount) +static void idescsi_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, + unsigned int bcount) { int count; char *buf; @@ -200,11 +165,12 @@ static void idescsi_input_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsigne if (bcount) { printk (KERN_ERR "ide-scsi: scatter gather table too small, discarding data\n"); - idescsi_discard_data (drive, bcount); + ide_atapi_discard_data(drive, bcount); } } -static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsigned int bcount) +static void idescsi_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, + unsigned int bcount) { int count; char *buf; @@ -237,7 +203,7 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign if (bcount) { printk (KERN_ERR "ide-scsi: scatter gather table too small, padding with zeros\n"); - idescsi_output_zeros (drive, bcount); + ide_atapi_write_zeros(drive, bcount); } } @@ -246,15 +212,16 @@ static void ide_scsi_hex_dump(u8 *data, int len) print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0); } -static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command) +static int idescsi_check_condition(ide_drive_t *drive, + struct request *failed_cmd) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); - idescsi_pc_t *pc; + struct ide_atapi_pc *pc; struct request *rq; u8 *buf; /* stuff a sense request in front of our current request */ - pc = kzalloc(sizeof(idescsi_pc_t), GFP_ATOMIC); + pc = kzalloc(sizeof(struct ide_atapi_pc), GFP_ATOMIC); rq = kmalloc(sizeof(struct request), GFP_ATOMIC); buf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_ATOMIC); if (!pc || !rq || !buf) { @@ -266,14 +233,14 @@ static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_co ide_init_drive_cmd(rq); rq->special = (char *) pc; pc->rq = rq; - pc->buffer = buf; + pc->buf = buf; pc->c[0] = REQUEST_SENSE; - pc->c[4] = pc->request_transfer = pc->buffer_size = SCSI_SENSE_BUFFERSIZE; + pc->c[4] = pc->req_xfer = pc->buf_size = SCSI_SENSE_BUFFERSIZE; rq->cmd_type = REQ_TYPE_SENSE; pc->timeout = jiffies + WAIT_READY; /* NOTE! Save the failed packet command in "rq->buffer" */ - rq->buffer = (void *) failed_command->special; - pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd; + rq->buffer = (void *) failed_cmd->special; + pc->scsi_cmd = ((struct ide_atapi_pc *) failed_cmd->special)->scsi_cmd; if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { printk ("ide-scsi: %s: queue cmd = ", drive->name); ide_scsi_hex_dump(pc->c, 6); @@ -287,9 +254,12 @@ static int idescsi_end_request(ide_drive_t *, int, int); static ide_startstop_t idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) { + ide_hwif_t *hwif = drive->hwif; + if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT)) /* force an abort */ - HWIF(drive)->OUTB(WIN_IDLEIMMEDIATE,IDE_COMMAND_REG); + hwif->OUTB(WIN_IDLEIMMEDIATE, + hwif->io_ports[IDE_COMMAND_OFFSET]); rq->errors++; @@ -303,7 +273,7 @@ idescsi_atapi_abort(ide_drive_t *drive, struct request *rq) { #if IDESCSI_DEBUG_LOG printk(KERN_WARNING "idescsi_atapi_abort called for %lu\n", - ((idescsi_pc_t *) rq->special)->scsi_cmd->serial_number); + ((struct ide_atapi_pc *) rq->special)->scsi_cmd->serial_number); #endif rq->errors |= ERROR_MAX; @@ -316,7 +286,7 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); struct request *rq = HWGROUP(drive)->rq; - idescsi_pc_t *pc = (idescsi_pc_t *) rq->special; + struct ide_atapi_pc *pc = (struct ide_atapi_pc *) rq->special; int log = test_bit(IDESCSI_LOG_CMD, &scsi->log); struct Scsi_Host *host; int errors = rq->errors; @@ -328,20 +298,23 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) } ide_end_drive_cmd (drive, 0, 0); if (blk_sense_request(rq)) { - idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer; + struct ide_atapi_pc *opc = (struct ide_atapi_pc *) rq->buffer; if (log) { printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number); - ide_scsi_hex_dump(pc->buffer, 16); + ide_scsi_hex_dump(pc->buf, 16); } - memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE); - kfree(pc->buffer); + memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buf, + SCSI_SENSE_BUFFERSIZE); + kfree(pc->buf); kfree(pc); kfree(rq); pc = opc; rq = pc->rq; pc->scsi_cmd->result = (CHECK_CONDITION << 1) | - ((test_bit(PC_TIMEDOUT, &pc->flags)?DID_TIME_OUT:DID_OK) << 16); - } else if (test_bit(PC_TIMEDOUT, &pc->flags)) { + (((pc->flags & PC_FLAG_TIMEDOUT) ? + DID_TIME_OUT : + DID_OK) << 16); + } else if (pc->flags & PC_FLAG_TIMEDOUT) { if (log) printk (KERN_WARNING "ide-scsi: %s: timed out for %lu\n", drive->name, pc->scsi_cmd->serial_number); @@ -370,7 +343,7 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) return 0; } -static inline unsigned long get_timeout(idescsi_pc_t *pc) +static inline unsigned long get_timeout(struct ide_atapi_pc *pc) { return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies); } @@ -378,12 +351,12 @@ static inline unsigned long get_timeout(idescsi_pc_t *pc) static int idescsi_expiry(ide_drive_t *drive) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); - idescsi_pc_t *pc = scsi->pc; + struct ide_atapi_pc *pc = scsi->pc; #if IDESCSI_DEBUG_LOG printk(KERN_WARNING "idescsi_expiry called for %lu at %lu\n", pc->scsi_cmd->serial_number, jiffies); #endif - set_bit(PC_TIMEDOUT, &pc->flags); + pc->flags |= PC_FLAG_TIMEDOUT; return 0; /* we do not want the ide subsystem to retry */ } @@ -395,7 +368,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); ide_hwif_t *hwif = drive->hwif; - idescsi_pc_t *pc = scsi->pc; + struct ide_atapi_pc *pc = scsi->pc; struct request *rq = pc->rq; unsigned int temp; u16 bcount; @@ -405,7 +378,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n"); #endif /* IDESCSI_DEBUG_LOG */ - if (test_bit(PC_TIMEDOUT, &pc->flags)){ + if (pc->flags & PC_FLAG_TIMEDOUT) { #if IDESCSI_DEBUG_LOG printk(KERN_WARNING "idescsi_pc_intr: got timed out packet %lu at %lu\n", pc->scsi_cmd->serial_number, jiffies); @@ -414,12 +387,13 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) idescsi_end_request (drive, 1, 0); return ide_stopped; } - if (test_and_clear_bit (PC_DMA_IN_PROGRESS, &pc->flags)) { + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; #if IDESCSI_DEBUG_LOG printk ("ide-scsi: %s: DMA complete\n", drive->name); #endif /* IDESCSI_DEBUG_LOG */ - pc->actually_transferred=pc->request_transfer; - (void) HWIF(drive)->ide_dma_end(drive); + pc->xferred = pc->req_xfer; + (void)hwif->dma_ops->dma_end(drive); } /* Clear the interrupt */ @@ -428,42 +402,44 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) - printk (KERN_INFO "Packet command completed, %d bytes transferred\n", pc->actually_transferred); + printk(KERN_INFO "Packet command completed, %d bytes" + " transferred\n", pc->xferred); local_irq_enable_in_hardirq(); if (stat & ERR_STAT) rq->errors++; idescsi_end_request (drive, 1, 0); return ide_stopped; } - bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) | - hwif->INB(IDE_BCOUNTL_REG); - ireason = hwif->INB(IDE_IREASON_REG); + bcount = (hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]) << 8) | + hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]); + ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); if (ireason & CD) { printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n"); return ide_do_reset (drive); } if (ireason & IO) { - temp = pc->actually_transferred + bcount; - if (temp > pc->request_transfer) { - if (temp > pc->buffer_size) { + temp = pc->xferred + bcount; + if (temp > pc->req_xfer) { + if (temp > pc->buf_size) { printk(KERN_ERR "ide-scsi: The scsi wants to " "send us more data than expected " "- discarding data\n"); - temp = pc->buffer_size - pc->actually_transferred; + temp = pc->buf_size - pc->xferred; if (temp) { - clear_bit(PC_WRITING, &pc->flags); + pc->flags &= ~PC_FLAG_WRITING; if (pc->sg) - idescsi_input_buffers(drive, pc, temp); + idescsi_input_buffers(drive, pc, + temp); else - drive->hwif->atapi_input_bytes(drive, pc->current_position, temp); + drive->hwif->atapi_input_bytes(drive, pc->cur_pos, temp); printk(KERN_ERR "ide-scsi: transferred" " %d of %d bytes\n", temp, bcount); } - pc->actually_transferred += temp; - pc->current_position += temp; - idescsi_discard_data(drive, bcount - temp); + pc->xferred += temp; + pc->cur_pos += temp; + ide_atapi_discard_data(drive, bcount - temp); ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); return ide_started; } @@ -473,23 +449,23 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) } } if (ireason & IO) { - clear_bit(PC_WRITING, &pc->flags); + pc->flags &= ~PC_FLAG_WRITING; if (pc->sg) idescsi_input_buffers(drive, pc, bcount); else - hwif->atapi_input_bytes(drive, pc->current_position, + hwif->atapi_input_bytes(drive, pc->cur_pos, bcount); } else { - set_bit(PC_WRITING, &pc->flags); + pc->flags |= PC_FLAG_WRITING; if (pc->sg) idescsi_output_buffers(drive, pc, bcount); else - hwif->atapi_output_bytes(drive, pc->current_position, + hwif->atapi_output_bytes(drive, pc->cur_pos, bcount); } /* Update the current position */ - pc->actually_transferred += bcount; - pc->current_position += bcount; + pc->xferred += bcount; + pc->cur_pos += bcount; /* And set the interrupt handler again */ ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); @@ -500,7 +476,7 @@ static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; idescsi_scsi_t *scsi = drive_to_idescsi(drive); - idescsi_pc_t *pc = scsi->pc; + struct ide_atapi_pc *pc = scsi->pc; ide_startstop_t startstop; u8 ireason; @@ -509,7 +485,7 @@ static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) "initiated yet DRQ isn't asserted\n"); return startstop; } - ireason = hwif->INB(IDE_IREASON_REG); + ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]); if ((ireason & CD) == 0 || (ireason & IO)) { printk(KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while " "issuing a packet command\n"); @@ -520,34 +496,34 @@ static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); /* Send the actual packet */ drive->hwif->atapi_output_bytes(drive, scsi->pc->c, 12); - if (test_bit (PC_DMA_OK, &pc->flags)) { - set_bit (PC_DMA_IN_PROGRESS, &pc->flags); - hwif->dma_start(drive); + if (pc->flags & PC_FLAG_DMA_OK) { + pc->flags |= PC_FLAG_DMA_IN_PROGRESS; + hwif->dma_ops->dma_start(drive); } return ide_started; } -static inline int idescsi_set_direction(idescsi_pc_t *pc) +static inline int idescsi_set_direction(struct ide_atapi_pc *pc) { switch (pc->c[0]) { case READ_6: case READ_10: case READ_12: - clear_bit(PC_WRITING, &pc->flags); + pc->flags &= ~PC_FLAG_WRITING; return 0; case WRITE_6: case WRITE_10: case WRITE_12: - set_bit(PC_WRITING, &pc->flags); + pc->flags |= PC_FLAG_WRITING; return 0; default: return 1; } } -static int idescsi_map_sg(ide_drive_t *drive, idescsi_pc_t *pc) +static int idescsi_map_sg(ide_drive_t *drive, struct ide_atapi_pc *pc) { ide_hwif_t *hwif = drive->hwif; struct scatterlist *sg, *scsi_sg; int segments; - if (!pc->request_transfer || pc->request_transfer % 1024) + if (!pc->req_xfer || pc->req_xfer % 1024) return 1; if (idescsi_set_direction(pc)) @@ -566,32 +542,32 @@ static int idescsi_map_sg(ide_drive_t *drive, idescsi_pc_t *pc) return 0; } -/* - * Issue a packet command - */ -static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc) +static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, + struct ide_atapi_pc *pc) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); ide_hwif_t *hwif = drive->hwif; u16 bcount; u8 dma = 0; - scsi->pc=pc; /* Set the current packet command */ - pc->actually_transferred=0; /* We haven't transferred any data yet */ - pc->current_position=pc->buffer; + /* Set the current packet command */ + scsi->pc = pc; + /* We haven't transferred any data yet */ + pc->xferred = 0; + pc->cur_pos = pc->buf; /* Request to transfer the entire buffer at once */ - bcount = min(pc->request_transfer, 63 * 1024); + bcount = min(pc->req_xfer, 63 * 1024); if (drive->using_dma && !idescsi_map_sg(drive, pc)) { hwif->sg_mapped = 1; - dma = !hwif->dma_setup(drive); + dma = !hwif->dma_ops->dma_setup(drive); hwif->sg_mapped = 0; } ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK, bcount, dma); if (dma) - set_bit(PC_DMA_OK, &pc->flags); + pc->flags |= PC_FLAG_DMA_OK; if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) { ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc, @@ -599,7 +575,7 @@ static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc) return ide_started; } else { /* Issue the packet command */ - HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); + hwif->OUTB(WIN_PACKETCMD, hwif->io_ports[IDE_COMMAND_OFFSET]); return idescsi_transfer_pc(drive); } } @@ -615,7 +591,8 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r #endif /* IDESCSI_DEBUG_LOG */ if (blk_sense_request(rq) || blk_special_request(rq)) { - return idescsi_issue_pc (drive, (idescsi_pc_t *) rq->special); + return idescsi_issue_pc(drive, + (struct ide_atapi_pc *) rq->special); } blk_dump_rq_flags(rq, "ide-scsi: unsup command"); idescsi_end_request (drive, 0, 0); @@ -773,15 +750,15 @@ static int idescsi_queue (struct scsi_cmnd *cmd, idescsi_scsi_t *scsi = scsihost_to_idescsi(host); ide_drive_t *drive = scsi->drive; struct request *rq = NULL; - idescsi_pc_t *pc = NULL; + struct ide_atapi_pc *pc = NULL; if (!drive) { scmd_printk (KERN_ERR, cmd, "drive not present\n"); goto abort; } scsi = drive_to_idescsi(drive); - pc = kmalloc (sizeof (idescsi_pc_t), GFP_ATOMIC); - rq = kmalloc (sizeof (struct request), GFP_ATOMIC); + pc = kmalloc(sizeof(struct ide_atapi_pc), GFP_ATOMIC); + rq = kmalloc(sizeof(struct request), GFP_ATOMIC); if (rq == NULL || pc == NULL) { printk (KERN_ERR "ide-scsi: %s: out of memory\n", drive->name); goto abort; @@ -791,11 +768,11 @@ static int idescsi_queue (struct scsi_cmnd *cmd, pc->flags = 0; pc->rq = rq; memcpy (pc->c, cmd->cmnd, cmd->cmd_len); - pc->buffer = NULL; + pc->buf = NULL; pc->sg = scsi_sglist(cmd); pc->sg_cnt = scsi_sg_count(cmd); pc->b_count = 0; - pc->request_transfer = pc->buffer_size = scsi_bufflen(cmd); + pc->req_xfer = pc->buf_size = scsi_bufflen(cmd); pc->scsi_cmd = cmd; pc->done = done; pc->timeout = jiffies + cmd->timeout_per_command; @@ -866,7 +843,7 @@ static int idescsi_eh_abort (struct scsi_cmnd *cmd) printk (KERN_ERR "ide-scsi: cmd aborted!\n"); if (blk_sense_request(scsi->pc->rq)) - kfree(scsi->pc->buffer); + kfree(scsi->pc->buf); kfree(scsi->pc->rq); kfree(scsi->pc); scsi->pc = NULL; @@ -916,7 +893,7 @@ static int idescsi_eh_reset (struct scsi_cmnd *cmd) if (__blk_end_request(req, -EIO, 0)) BUG(); if (blk_sense_request(req)) - kfree(scsi->pc->buffer); + kfree(scsi->pc->buf); kfree(scsi->pc); scsi->pc = NULL; kfree(req); diff --git a/include/asm-alpha/ide.h b/include/asm-alpha/ide.h index b7bf68d0407b..f44129abc02c 100644 --- a/include/asm-alpha/ide.h +++ b/include/asm-alpha/ide.h @@ -13,9 +13,6 @@ #ifdef __KERNEL__ - -#define IDE_ARCH_OBSOLETE_DEFAULTS - static inline int ide_default_irq(unsigned long base) { switch (base) { @@ -40,14 +37,6 @@ static inline unsigned long ide_default_io_base(int index) } } -#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ - -#ifdef CONFIG_PCI -#define ide_init_default_irq(base) (0) -#else -#define ide_init_default_irq(base) ide_default_irq(base) -#endif - #include <asm-generic/ide_iops.h> #endif /* __KERNEL__ */ diff --git a/include/asm-arm/ide.h b/include/asm-arm/ide.h index f348fcf3150b..88f4d231ce4f 100644 --- a/include/asm-arm/ide.h +++ b/include/asm-arm/ide.h @@ -17,14 +17,6 @@ #define MAX_HWIFS 4 #endif -#if !defined(CONFIG_ARCH_L7200) -# ifdef CONFIG_ARCH_CLPS7500 -# define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ -# else -# define ide_default_io_ctl(base) (0) -# endif -#endif /* !ARCH_L7200 */ - #define __ide_mm_insw(port,addr,len) readsw(port,addr,len) #define __ide_mm_insl(port,addr,len) readsl(port,addr,len) #define __ide_mm_outsw(port,addr,len) writesw(port,addr,len) diff --git a/include/asm-blackfin/ide.h b/include/asm-blackfin/ide.h index 121e272581d6..5b88de115bf4 100644 --- a/include/asm-blackfin/ide.h +++ b/include/asm-blackfin/ide.h @@ -19,10 +19,6 @@ #define MAX_HWIFS 1 -/* Legacy ... BLK_DEV_IDECS */ -#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ - - #include <asm-generic/ide_iops.h> /****************************************************************************/ diff --git a/include/asm-ia64/ide.h b/include/asm-ia64/ide.h index 1ccf23809329..8fa3f8cd067a 100644 --- a/include/asm-ia64/ide.h +++ b/include/asm-ia64/ide.h @@ -16,8 +16,6 @@ #include <linux/irq.h> -#define IDE_ARCH_OBSOLETE_DEFAULTS - static inline int ide_default_irq(unsigned long base) { switch (base) { @@ -46,14 +44,6 @@ static inline unsigned long ide_default_io_base(int index) } } -#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ - -#ifdef CONFIG_PCI -#define ide_init_default_irq(base) (0) -#else -#define ide_init_default_irq(base) ide_default_irq(base) -#endif - #include <asm-generic/ide_iops.h> #endif /* __KERNEL__ */ diff --git a/include/asm-m32r/ide.h b/include/asm-m32r/ide.h index 5d2044e529ab..1e7f6474d130 100644 --- a/include/asm-m32r/ide.h +++ b/include/asm-m32r/ide.h @@ -23,8 +23,6 @@ # endif #endif -#define IDE_ARCH_OBSOLETE_DEFAULTS - static __inline__ int ide_default_irq(unsigned long base) { switch (base) { @@ -65,14 +63,6 @@ static __inline__ unsigned long ide_default_io_base(int index) } } -#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ - -#ifdef CONFIG_BLK_DEV_IDEPCI -#define ide_init_default_irq(base) (0) -#else -#define ide_init_default_irq(base) ide_default_irq(base) -#endif - #include <asm-generic/ide_iops.h> #endif /* __KERNEL__ */ diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h index e4fe26c160ba..6e388c1e1c86 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_ide.h +++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h @@ -70,7 +70,6 @@ typedef struct ide_hwif_t *hwif; #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA ide_drive_t *drive; - u8 white_list, black_list; struct dbdma_cmd *dma_table_cpu; dma_addr_t dma_table_dma; #endif @@ -81,47 +80,6 @@ typedef struct #endif } _auide_hwif; -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA -/* HD white list */ -static const struct drive_list_entry dma_white_list [] = { -/* - * Hitachi - */ - { "HITACHI_DK14FA-20" , NULL }, - { "HTS726060M9AT00" , NULL }, -/* - * Maxtor - */ - { "Maxtor 6E040L0" , NULL }, - { "Maxtor 6Y080P0" , NULL }, - { "Maxtor 6Y160P0" , NULL }, -/* - * Seagate - */ - { "ST3120026A" , NULL }, - { "ST320014A" , NULL }, - { "ST94011A" , NULL }, - { "ST340016A" , NULL }, -/* - * Western Digital - */ - { "WDC WD400UE-00HCT0" , NULL }, - { "WDC WD400JB-00JJC0" , NULL }, - { NULL , NULL } -}; - -/* HD black list */ -static const struct drive_list_entry dma_black_list [] = { -/* - * Western Digital - */ - { "WDC WD100EB-00CGH0" , NULL }, - { "WDC WD200BB-00AUA1" , NULL }, - { "WDC AC24300L" , NULL }, - { NULL , NULL } -}; -#endif - /* function prototyping */ u8 auide_inb(unsigned long port); u16 auide_inw(unsigned long port); diff --git a/include/asm-mips/mach-generic/ide.h b/include/asm-mips/mach-generic/ide.h index 4ec2b930dfbb..0f6c251f5fec 100644 --- a/include/asm-mips/mach-generic/ide.h +++ b/include/asm-mips/mach-generic/ide.h @@ -27,8 +27,6 @@ # endif #endif -#define IDE_ARCH_OBSOLETE_DEFAULTS - static __inline__ int ide_probe_legacy(void) { #ifdef CONFIG_PCI @@ -98,14 +96,6 @@ static __inline__ unsigned long ide_default_io_base(int index) } } -#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ - -#ifdef CONFIG_BLK_DEV_IDEPCI -#define ide_init_default_irq(base) (0) -#else -#define ide_init_default_irq(base) ide_default_irq(base) -#endif - /* MIPS port and memory-mapped I/O string operations. */ static inline void __ide_flush_prologue(void) { diff --git a/include/asm-parisc/ide.h b/include/asm-parisc/ide.h index be8760fbc8ee..db0c94410095 100644 --- a/include/asm-parisc/ide.h +++ b/include/asm-parisc/ide.h @@ -17,8 +17,6 @@ #define MAX_HWIFS 2 #endif -#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ - #define ide_request_irq(irq,hand,flg,dev,id) request_irq((irq),(hand),(flg),(dev),(id)) #define ide_free_irq(irq,dev_id) free_irq((irq), (dev_id)) #define ide_request_region(from,extent,name) request_region((from), (extent), (name)) diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h index 6d50310ecaea..3d90bf7d3d73 100644 --- a/include/asm-powerpc/ide.h +++ b/include/asm-powerpc/ide.h @@ -31,39 +31,48 @@ #include <linux/hdreg.h> #include <linux/ioport.h> -struct ide_machdep_calls { - int (*default_irq)(unsigned long base); - unsigned long (*default_io_base)(int index); - void (*ide_init_hwif)(hw_regs_t *hw, - unsigned long data_port, - unsigned long ctrl_port, - int *irq); -}; - -extern struct ide_machdep_calls ppc_ide_md; - -#define IDE_ARCH_OBSOLETE_DEFAULTS - +/* FIXME: use ide_platform host driver */ static __inline__ int ide_default_irq(unsigned long base) { - if (ppc_ide_md.default_irq) - return ppc_ide_md.default_irq(base); +#ifdef CONFIG_PPLUS + switch (base) { + case 0x1f0: return 14; + case 0x170: return 15; + } +#endif +#ifdef CONFIG_PPC_PREP + switch (base) { + case 0x1f0: return 13; + case 0x170: return 13; + case 0x1e8: return 11; + case 0x168: return 10; + case 0xfff0: return 14; /* MCP(N)750 ide0 */ + case 0xffe0: return 15; /* MCP(N)750 ide1 */ + } +#endif return 0; } +/* FIXME: use ide_platform host driver */ static __inline__ unsigned long ide_default_io_base(int index) { - if (ppc_ide_md.default_io_base) - return ppc_ide_md.default_io_base(index); +#ifdef CONFIG_PPLUS + switch (index) { + case 0: return 0x1f0; + case 1: return 0x170; + } +#endif +#ifdef CONFIG_PPC_PREP + switch (index) { + case 0: return 0x1f0; + case 1: return 0x170; + case 2: return 0x1e8; + case 3: return 0x168; + } +#endif return 0; } -#ifdef CONFIG_PCI -#define ide_init_default_irq(base) (0) -#else -#define ide_init_default_irq(base) ide_default_irq(base) -#endif - #ifdef CONFIG_BLK_DEV_MPC8xx_IDE #define IDE_ARCH_ACK_INTR 1 #define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1) @@ -71,8 +80,6 @@ static __inline__ unsigned long ide_default_io_base(int index) #endif /* __powerpc64__ */ -#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ - #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_IDE_H */ diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h index de83fe196309..df111c362a7f 100644 --- a/include/asm-powerpc/mediabay.h +++ b/include/asm-powerpc/mediabay.h @@ -22,10 +22,14 @@ int check_media_bay(struct device_node *which_bay, int what); /* Number of bays in the machine or 0 */ extern int media_bay_count; +#ifdef CONFIG_BLK_DEV_IDE_PMAC +#include <linux/ide.h> + int check_media_bay_by_base(unsigned long base, int what); /* called by IDE PMAC host driver to register IDE controller for media bay */ int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base, - int irq, int index); + int irq, ide_hwif_t *hwif); +#endif #endif /* __KERNEL__ */ #endif /* _PPC_MEDIABAY_H */ diff --git a/include/asm-sh/ide.h b/include/asm-sh/ide.h index 9f8e9142dc33..58e0bdd52be4 100644 --- a/include/asm-sh/ide.h +++ b/include/asm-sh/ide.h @@ -14,9 +14,6 @@ #ifdef __KERNEL__ - -#define ide_default_io_ctl(base) (0) - #include <asm-generic/ide_iops.h> #endif /* __KERNEL__ */ diff --git a/include/asm-sparc/ide.h b/include/asm-sparc/ide.h index 4076cb5d1581..afd1736ed480 100644 --- a/include/asm-sparc/ide.h +++ b/include/asm-sparc/ide.h @@ -17,8 +17,6 @@ #undef MAX_HWIFS #define MAX_HWIFS 2 -#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ - #define __ide_insl(data_reg, buffer, wcount) \ __ide_insw(data_reg, buffer, (wcount)<<1) #define __ide_outsl(data_reg, buffer, wcount) \ diff --git a/include/asm-sparc64/ide.h b/include/asm-sparc64/ide.h index ac7eb210b941..c5fdabe0b42d 100644 --- a/include/asm-sparc64/ide.h +++ b/include/asm-sparc64/ide.h @@ -24,8 +24,6 @@ # endif #endif -#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ - #define __ide_insl(data_reg, buffer, wcount) \ __ide_insw(data_reg, buffer, (wcount)<<1) #define __ide_outsl(data_reg, buffer, wcount) \ diff --git a/include/asm-x86/ide.h b/include/asm-x86/ide.h index c2552d8bebf7..cf9c98e5bdb5 100644 --- a/include/asm-x86/ide.h +++ b/include/asm-x86/ide.h @@ -20,8 +20,6 @@ # endif #endif -#define IDE_ARCH_OBSOLETE_DEFAULTS - static __inline__ int ide_default_irq(unsigned long base) { switch (base) { @@ -60,14 +58,6 @@ static __inline__ unsigned long ide_default_io_base(int index) } } -#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ - -#ifdef CONFIG_BLK_DEV_IDEPCI -#define ide_init_default_irq(base) (0) -#else -#define ide_init_default_irq(base) ide_default_irq(base) -#endif - #include <asm-generic/ide_iops.h> #endif /* __KERNEL__ */ diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 4108b38ebb16..f94c5d04a705 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -209,7 +209,6 @@ unifdef-y += hayesesp.h unifdef-y += hdlcdrv.h unifdef-y += hdlc.h unifdef-y += hdreg.h -unifdef-y += hdsmart.h unifdef-y += hiddev.h unifdef-y += hpet.h unifdef-y += i2c.h diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h index e38e75967e74..c37e9241fae7 100644 --- a/include/linux/hdreg.h +++ b/include/linux/hdreg.h @@ -422,9 +422,11 @@ struct hd_geometry { #define HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */ #define HDIO_SET_DMA 0x0326 /* change use-dma flag */ #define HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */ +#ifndef __KERNEL__ #define HDIO_SCAN_HWIF 0x0328 /* register and (re)scan interface */ -#define HDIO_SET_NICE 0x0329 /* set nice flags */ #define HDIO_UNREGISTER_HWIF 0x032a /* unregister interface */ +#endif +#define HDIO_SET_NICE 0x0329 /* set nice flags */ #define HDIO_SET_WCACHE 0x032b /* change write cache enable-disable */ #define HDIO_SET_ACOUSTIC 0x032c /* change acoustic behavior */ #define HDIO_SET_BUSSTATE 0x032d /* set the bus state of the hwif */ diff --git a/include/linux/hdsmart.h b/include/linux/hdsmart.h deleted file mode 100644 index 4f4faf9d4238..000000000000 --- a/include/linux/hdsmart.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * linux/include/linux/hdsmart.h - * - * Copyright (C) 1999-2000 Michael Cornwell <cornwell@acm.org> - * Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * You should have received a copy of the GNU General Public License - * (for example /usr/src/linux/COPYING); if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _LINUX_HDSMART_H -#define _LINUX_HDSMART_H - -#ifndef __KERNEL__ -#define OFFLINE_FULL_SCAN 0 -#define SHORT_SELF_TEST 1 -#define EXTEND_SELF_TEST 2 -#define SHORT_CAPTIVE_SELF_TEST 129 -#define EXTEND_CAPTIVE_SELF_TEST 130 - -/* smart_attribute is the vendor specific in SFF-8035 spec */ -typedef struct ata_smart_attribute_s { - unsigned char id; - unsigned short status_flag; - unsigned char normalized; - unsigned char worse_normal; - unsigned char raw[6]; - unsigned char reserv; -} __attribute__ ((packed)) ata_smart_attribute_t; - -/* smart_values is format of the read drive Atrribute command */ -typedef struct ata_smart_values_s { - unsigned short revnumber; - ata_smart_attribute_t vendor_attributes [30]; - unsigned char offline_data_collection_status; - unsigned char self_test_exec_status; - unsigned short total_time_to_complete_off_line; - unsigned char vendor_specific_366; - unsigned char offline_data_collection_capability; - unsigned short smart_capability; - unsigned char errorlog_capability; - unsigned char vendor_specific_371; - unsigned char short_test_completion_time; - unsigned char extend_test_completion_time; - unsigned char reserved_374_385 [12]; - unsigned char vendor_specific_386_509 [125]; - unsigned char chksum; -} __attribute__ ((packed)) ata_smart_values_t; - -/* Smart Threshold data structures */ -/* Vendor attribute of SMART Threshold */ -typedef struct ata_smart_threshold_entry_s { - unsigned char id; - unsigned char normalized_threshold; - unsigned char reserved[10]; -} __attribute__ ((packed)) ata_smart_threshold_entry_t; - -/* Format of Read SMART THreshold Command */ -typedef struct ata_smart_thresholds_s { - unsigned short revnumber; - ata_smart_threshold_entry_t thres_entries[30]; - unsigned char reserved[149]; - unsigned char chksum; -} __attribute__ ((packed)) ata_smart_thresholds_t; - -typedef struct ata_smart_errorlog_command_struct_s { - unsigned char devicecontrolreg; - unsigned char featuresreg; - unsigned char sector_count; - unsigned char sector_number; - unsigned char cylinder_low; - unsigned char cylinder_high; - unsigned char drive_head; - unsigned char commandreg; - unsigned int timestamp; -} __attribute__ ((packed)) ata_smart_errorlog_command_struct_t; - -typedef struct ata_smart_errorlog_error_struct_s { - unsigned char error_condition; - unsigned char extended_error[14]; - unsigned char state; - unsigned short timestamp; -} __attribute__ ((packed)) ata_smart_errorlog_error_struct_t; - -typedef struct ata_smart_errorlog_struct_s { - ata_smart_errorlog_command_struct_t commands[6]; - ata_smart_errorlog_error_struct_t error_struct; -} __attribute__ ((packed)) ata_smart_errorlog_struct_t; - -typedef struct ata_smart_errorlog_s { - unsigned char revnumber; - unsigned char error_log_pointer; - ata_smart_errorlog_struct_t errorlog_struct[5]; - unsigned short ata_error_count; - unsigned short non_fatal_count; - unsigned short drive_timeout_count; - unsigned char reserved[53]; - unsigned char chksum; -} __attribute__ ((packed)) ata_smart_errorlog_t; - -typedef struct ata_smart_selftestlog_struct_s { - unsigned char selftestnumber; - unsigned char selfteststatus; - unsigned short timestamp; - unsigned char selftestfailurecheckpoint; - unsigned int lbafirstfailure; - unsigned char vendorspecific[15]; -} __attribute__ ((packed)) ata_smart_selftestlog_struct_t; - -typedef struct ata_smart_selftestlog_s { - unsigned short revnumber; - ata_smart_selftestlog_struct_t selftest_struct[21]; - unsigned char vendorspecific[2]; - unsigned char mostrecenttest; - unsigned char resevered[2]; - unsigned char chksum; -} __attribute__ ((packed)) ata_smart_selftestlog_t; -#endif /* __KERNEL__ */ - -#endif /* _LINUX_HDSMART_H */ diff --git a/include/linux/ide.h b/include/linux/ide.h index 415adbbeacdb..792a102b3a09 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -49,13 +49,6 @@ typedef unsigned char byte; /* used everywhere */ #define ERROR_RECAL 1 /* Recalibrate every 2nd retry */ /* - * Tune flags - */ -#define IDE_TUNE_NOAUTO 2 -#define IDE_TUNE_AUTO 1 -#define IDE_TUNE_DEFAULT 0 - -/* * state flags */ @@ -82,24 +75,10 @@ typedef unsigned char byte; /* used everywhere */ #define IDE_FEATURE_OFFSET IDE_ERROR_OFFSET #define IDE_COMMAND_OFFSET IDE_STATUS_OFFSET - -#define IDE_DATA_REG (HWIF(drive)->io_ports[IDE_DATA_OFFSET]) -#define IDE_ERROR_REG (HWIF(drive)->io_ports[IDE_ERROR_OFFSET]) -#define IDE_NSECTOR_REG (HWIF(drive)->io_ports[IDE_NSECTOR_OFFSET]) -#define IDE_SECTOR_REG (HWIF(drive)->io_ports[IDE_SECTOR_OFFSET]) -#define IDE_LCYL_REG (HWIF(drive)->io_ports[IDE_LCYL_OFFSET]) -#define IDE_HCYL_REG (HWIF(drive)->io_ports[IDE_HCYL_OFFSET]) -#define IDE_SELECT_REG (HWIF(drive)->io_ports[IDE_SELECT_OFFSET]) -#define IDE_STATUS_REG (HWIF(drive)->io_ports[IDE_STATUS_OFFSET]) -#define IDE_CONTROL_REG (HWIF(drive)->io_ports[IDE_CONTROL_OFFSET]) -#define IDE_IRQ_REG (HWIF(drive)->io_ports[IDE_IRQ_OFFSET]) - -#define IDE_FEATURE_REG IDE_ERROR_REG -#define IDE_COMMAND_REG IDE_STATUS_REG -#define IDE_ALTSTATUS_REG IDE_CONTROL_REG -#define IDE_IREASON_REG IDE_NSECTOR_REG -#define IDE_BCOUNTL_REG IDE_LCYL_REG -#define IDE_BCOUNTH_REG IDE_HCYL_REG +#define IDE_ALTSTATUS_OFFSET IDE_CONTROL_OFFSET +#define IDE_IREASON_OFFSET IDE_NSECTOR_OFFSET +#define IDE_BCOUNTL_OFFSET IDE_LCYL_OFFSET +#define IDE_BCOUNTH_OFFSET IDE_HCYL_OFFSET #define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good)) #define BAD_R_STAT (BUSY_STAT | ERR_STAT) @@ -169,7 +148,7 @@ enum { ide_unknown, ide_generic, ide_pci, ide_rz1000, ide_trm290, ide_cmd646, ide_cy82c693, ide_4drives, ide_pmac, ide_etrax100, ide_acorn, - ide_au1xxx, ide_palm3710, ide_forced + ide_au1xxx, ide_palm3710 }; typedef u8 hwif_chipset_t; @@ -185,15 +164,9 @@ typedef struct hw_regs_s { struct device *dev; } hw_regs_t; -struct hwif_s * ide_find_port(unsigned long); -struct hwif_s *ide_deprecated_find_port(unsigned long); void ide_init_port_data(struct hwif_s *, unsigned int); void ide_init_port_hw(struct hwif_s *, hw_regs_t *); -struct ide_drive_s; -int ide_register_hw(hw_regs_t *, void (*)(struct ide_drive_s *), - struct hwif_s **); - static inline void ide_std_init_ports(hw_regs_t *hw, unsigned long io_addr, unsigned long ctl_addr) @@ -213,45 +186,6 @@ static inline void ide_std_init_ports(hw_regs_t *hw, #define MAX_HWIFS CONFIG_IDE_MAX_HWIFS #endif -/* needed on alpha, x86/x86_64, ia64, mips, ppc32 and sh */ -#ifndef IDE_ARCH_OBSOLETE_DEFAULTS -# define ide_default_io_base(index) (0) -# define ide_default_irq(base) (0) -# define ide_init_default_irq(base) (0) -#endif - -#ifdef CONFIG_IDE_ARCH_OBSOLETE_INIT -static inline void ide_init_hwif_ports(hw_regs_t *hw, - unsigned long io_addr, - unsigned long ctl_addr, - int *irq) -{ - if (!ctl_addr) - ide_std_init_ports(hw, io_addr, ide_default_io_ctl(io_addr)); - else - ide_std_init_ports(hw, io_addr, ctl_addr); - - if (irq) - *irq = 0; - - hw->io_ports[IDE_IRQ_OFFSET] = 0; - -#ifdef CONFIG_PPC32 - if (ppc_ide_md.ide_init_hwif) - ppc_ide_md.ide_init_hwif(hw, io_addr, ctl_addr, irq); -#endif -} -#else -static inline void ide_init_hwif_ports(hw_regs_t *hw, - unsigned long io_addr, - unsigned long ctl_addr, - int *irq) -{ - if (io_addr || ctl_addr) - printk(KERN_WARNING "%s: must not be called\n", __FUNCTION__); -} -#endif /* CONFIG_IDE_ARCH_OBSOLETE_INIT */ - /* Currently only m68k, apus and m8xx need it */ #ifndef IDE_ARCH_ACK_INTR # define ide_ack_intr(hwif) (1) @@ -388,7 +322,6 @@ typedef struct ide_drive_s { unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */ unsigned doorlocking : 1; /* for removable only: door lock/unlock works */ unsigned nodma : 1; /* disallow DMA */ - unsigned autotune : 2; /* 0=default, 1=autotune, 2=noautotune */ unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */ unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */ unsigned vdma : 1; /* 1=doing PIO over DMA 0=doing normal DMA */ @@ -406,7 +339,7 @@ typedef struct ide_drive_s { u8 wcache; /* status of write cache */ u8 acoustic; /* acoustic management */ u8 media; /* disk, cdrom, tape, floppy, ... */ - u8 ctl; /* "normal" value for IDE_CONTROL_REG */ + u8 ctl; /* "normal" value for Control register */ u8 ready_stat; /* min status value for drive ready */ u8 mult_count; /* current multiple sector setting */ u8 mult_req; /* requested multiple sector setting */ @@ -447,6 +380,43 @@ typedef struct ide_drive_s { struct ide_port_info; +struct ide_port_ops { + /* host specific initialization of devices on a port */ + void (*port_init_devs)(struct hwif_s *); + /* routine to program host for PIO mode */ + void (*set_pio_mode)(ide_drive_t *, const u8); + /* routine to program host for DMA mode */ + void (*set_dma_mode)(ide_drive_t *, const u8); + /* tweaks hardware to select drive */ + void (*selectproc)(ide_drive_t *); + /* chipset polling based on hba specifics */ + int (*reset_poll)(ide_drive_t *); + /* chipset specific changes to default for device-hba resets */ + void (*pre_reset)(ide_drive_t *); + /* routine to reset controller after a disk reset */ + void (*resetproc)(ide_drive_t *); + /* special host masking for drive selection */ + void (*maskproc)(ide_drive_t *, int); + /* check host's drive quirk list */ + void (*quirkproc)(ide_drive_t *); + + u8 (*mdma_filter)(ide_drive_t *); + u8 (*udma_filter)(ide_drive_t *); + + u8 (*cable_detect)(struct hwif_s *); +}; + +struct ide_dma_ops { + void (*dma_host_set)(struct ide_drive_s *, int); + int (*dma_setup)(struct ide_drive_s *); + void (*dma_exec_cmd)(struct ide_drive_s *, u8); + void (*dma_start)(struct ide_drive_s *); + int (*dma_end)(struct ide_drive_s *); + int (*dma_test_irq)(struct ide_drive_s *); + void (*dma_lost_irq)(struct ide_drive_s *); + void (*dma_timeout)(struct ide_drive_s *); +}; + typedef struct hwif_s { struct hwif_s *next; /* for linked-list in ide_hwgroup_t */ struct hwif_s *mate; /* other hwif from same PCI chip */ @@ -480,40 +450,12 @@ typedef struct hwif_s { struct device *dev; - const struct ide_port_info *cds; /* chipset device struct */ - ide_ack_intr_t *ack_intr; void (*rw_disk)(ide_drive_t *, struct request *); -#if 0 - ide_hwif_ops_t *hwifops; -#else - /* host specific initialization of devices on a port */ - void (*port_init_devs)(struct hwif_s *); - /* routine to program host for PIO mode */ - void (*set_pio_mode)(ide_drive_t *, const u8); - /* routine to program host for DMA mode */ - void (*set_dma_mode)(ide_drive_t *, const u8); - /* tweaks hardware to select drive */ - void (*selectproc)(ide_drive_t *); - /* chipset polling based on hba specifics */ - int (*reset_poll)(ide_drive_t *); - /* chipset specific changes to default for device-hba resets */ - void (*pre_reset)(ide_drive_t *); - /* routine to reset controller after a disk reset */ - void (*resetproc)(ide_drive_t *); - /* special host masking for drive selection */ - void (*maskproc)(ide_drive_t *, int); - /* check host's drive quirk list */ - void (*quirkproc)(ide_drive_t *); - /* driver soft-power interface */ - int (*busproc)(ide_drive_t *, int); -#endif - u8 (*mdma_filter)(ide_drive_t *); - u8 (*udma_filter)(ide_drive_t *); - - u8 (*cable_detect)(struct hwif_s *); + const struct ide_port_ops *port_ops; + const struct ide_dma_ops *dma_ops; void (*ata_input_data)(ide_drive_t *, void *, u32); void (*ata_output_data)(ide_drive_t *, void *, u32); @@ -521,15 +463,7 @@ typedef struct hwif_s { void (*atapi_input_bytes)(ide_drive_t *, void *, u32); void (*atapi_output_bytes)(ide_drive_t *, void *, u32); - void (*dma_host_set)(ide_drive_t *, int); - int (*dma_setup)(ide_drive_t *); - void (*dma_exec_cmd)(ide_drive_t *, u8); - void (*dma_start)(ide_drive_t *); - int (*ide_dma_end)(ide_drive_t *drive); - int (*ide_dma_test_irq)(ide_drive_t *drive); void (*ide_dma_clear_irq)(ide_drive_t *drive); - void (*dma_lost_irq)(ide_drive_t *drive); - void (*dma_timeout)(ide_drive_t *drive); void (*OUTB)(u8 addr, unsigned long port); void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port); @@ -576,17 +510,15 @@ typedef struct hwif_s { unsigned long extra_base; /* extra addr for dma ports */ unsigned extra_ports; /* number of extra dma ports */ - unsigned noprobe : 1; /* don't probe for this interface */ unsigned present : 1; /* this interface exists */ - unsigned hold : 1; /* this interface is always present */ unsigned serialized : 1; /* serialized all channel operation */ unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */ - unsigned reset : 1; /* reset after probe */ unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */ unsigned mmio : 1; /* host uses MMIO */ - unsigned straight8 : 1; /* Alan's straight 8 check */ - struct device gendev; + struct device gendev; + struct device *portdev; + struct completion gendev_rel_comp; /* To deal with device release() */ void *hwif_data; /* extra hwif data */ @@ -647,6 +579,68 @@ int set_io_32bit(ide_drive_t *, int); int set_pio_mode(ide_drive_t *, int); int set_using_dma(ide_drive_t *, int); +/* ATAPI packet command flags */ +enum { + /* set when an error is considered normal - no retry (ide-tape) */ + PC_FLAG_ABORT = (1 << 0), + PC_FLAG_SUPPRESS_ERROR = (1 << 1), + PC_FLAG_WAIT_FOR_DSC = (1 << 2), + PC_FLAG_DMA_OK = (1 << 3), + PC_FLAG_DMA_RECOMMENDED = (1 << 4), + PC_FLAG_DMA_IN_PROGRESS = (1 << 5), + PC_FLAG_DMA_ERROR = (1 << 6), + PC_FLAG_WRITING = (1 << 7), + /* command timed out */ + PC_FLAG_TIMEDOUT = (1 << 8), +}; + +struct ide_atapi_pc { + /* actual packet bytes */ + u8 c[12]; + /* incremented on each retry */ + int retries; + int error; + + /* bytes to transfer */ + int req_xfer; + /* bytes actually transferred */ + int xferred; + + /* data buffer */ + u8 *buf; + /* current buffer position */ + u8 *cur_pos; + int buf_size; + /* missing/available data on the current buffer */ + int b_count; + + /* the corresponding request */ + struct request *rq; + + unsigned long flags; + + /* + * those are more or less driver-specific and some of them are subject + * to change/removal later. + */ + u8 pc_buf[256]; + void (*idefloppy_callback) (ide_drive_t *); + ide_startstop_t (*idetape_callback) (ide_drive_t *); + + /* idetape only */ + struct idetape_bh *bh; + char *b_data; + + /* idescsi only for now */ + struct scatterlist *sg; + unsigned int sg_cnt; + + struct scsi_cmnd *scsi_cmd; + void (*done) (struct scsi_cmnd *); + + unsigned long timeout; +}; + #ifdef CONFIG_IDE_PROC_FS /* * configurable drive settings @@ -691,6 +685,7 @@ void proc_ide_create(void); void proc_ide_destroy(void); void ide_proc_register_port(ide_hwif_t *); void ide_proc_port_register_devices(ide_hwif_t *); +void ide_proc_unregister_device(ide_drive_t *); void ide_proc_unregister_port(ide_hwif_t *); void ide_proc_register_driver(ide_drive_t *, ide_driver_t *); void ide_proc_unregister_driver(ide_drive_t *, ide_driver_t *); @@ -724,6 +719,7 @@ static inline void proc_ide_create(void) { ; } static inline void proc_ide_destroy(void) { ; } static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; } static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; } +static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; } static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; } static inline void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { ; } static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) { ; } @@ -792,18 +788,15 @@ struct ide_driver_s { int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long); -/* - * ide_hwifs[] is the master data structure used to keep track - * of just about everything in ide.c. Whenever possible, routines - * should be using pointers to a drive (ide_drive_t *) or - * pointers to a hwif (ide_hwif_t *), rather than indexing this - * structure directly (the allocation/layout may change!). - * - */ -#ifndef _IDE_C -extern ide_hwif_t ide_hwifs[]; /* master data repository */ -#endif -extern int noautodma; +extern int ide_vlb_clk; +extern int ide_pci_clk; + +ide_hwif_t *ide_find_port_slot(const struct ide_port_info *); + +static inline ide_hwif_t *ide_find_port(void) +{ + return ide_find_port_slot(NULL); +} extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs); int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq, @@ -971,8 +964,6 @@ int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long); int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long); int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long); -extern int system_bus_clock(void); - extern int ide_driveid_update(ide_drive_t *); extern int ide_config_drive_speed(ide_drive_t *, u8); extern u8 eighty_ninty_three (ide_drive_t *); @@ -1000,10 +991,15 @@ void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, u8 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *); #ifdef CONFIG_BLK_DEV_IDEDMA_PCI -void ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *); +int ide_pci_set_master(struct pci_dev *, const char *); +unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *); +int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *); #else -static inline void ide_hwif_setup_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) { } +static inline int ide_hwif_setup_dma(ide_hwif_t *hwif, + const struct ide_port_info *d) +{ + return -EINVAL; +} #endif extern void default_hwif_iops(ide_hwif_t *); @@ -1023,8 +1019,8 @@ enum { IDE_HFLAG_SINGLE = (1 << 1), /* don't use legacy PIO blacklist */ IDE_HFLAG_PIO_NO_BLACKLIST = (1 << 2), - /* don't use conservative PIO "downgrade" */ - IDE_HFLAG_PIO_NO_DOWNGRADE = (1 << 3), + /* set for the second port of QD65xx */ + IDE_HFLAG_QD_2ND_PORT = (1 << 3), /* use PIO8/9 for prefetch off/on */ IDE_HFLAG_ABUSE_PREFETCH = (1 << 4), /* use PIO6/7 for fast-devsel off/on */ @@ -1046,14 +1042,12 @@ enum { IDE_HFLAG_VDMA = (1 << 11), /* ATAPI DMA is unsupported */ IDE_HFLAG_NO_ATAPI_DMA = (1 << 12), - /* set if host is a "bootable" controller */ - IDE_HFLAG_BOOTABLE = (1 << 13), + /* set if host is a "non-bootable" controller */ + IDE_HFLAG_NON_BOOTABLE = (1 << 13), /* host doesn't support DMA */ IDE_HFLAG_NO_DMA = (1 << 14), /* check if host is PCI IDE device before allowing DMA */ IDE_HFLAG_NO_AUTODMA = (1 << 15), - /* don't autotune PIO */ - IDE_HFLAG_NO_AUTOTUNE = (1 << 16), /* host is CS5510/CS5520 */ IDE_HFLAG_CS5520 = IDE_HFLAG_VDMA, /* no LBA48 */ @@ -1075,8 +1069,8 @@ enum { /* unmask IRQs */ IDE_HFLAG_UNMASK_IRQS = (1 << 25), IDE_HFLAG_ABUSE_SET_DMA_MODE = (1 << 26), - /* host is CY82C693 */ - IDE_HFLAG_CY82C693 = (1 << 27), + /* serialize ports if DMA is possible (for sl82c105) */ + IDE_HFLAG_SERIALIZE_DMA = (1 << 27), /* force host out of "simplex" mode */ IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28), /* DSC overlap is unsupported */ @@ -1088,9 +1082,9 @@ enum { }; #ifdef CONFIG_BLK_DEV_OFFBOARD -# define IDE_HFLAG_OFF_BOARD IDE_HFLAG_BOOTABLE -#else # define IDE_HFLAG_OFF_BOARD 0 +#else +# define IDE_HFLAG_OFF_BOARD IDE_HFLAG_NON_BOOTABLE #endif struct ide_port_info { @@ -1098,10 +1092,14 @@ struct ide_port_info { unsigned int (*init_chipset)(struct pci_dev *, const char *); void (*init_iops)(ide_hwif_t *); void (*init_hwif)(ide_hwif_t *); - void (*init_dma)(ide_hwif_t *, unsigned long); + int (*init_dma)(ide_hwif_t *, + const struct ide_port_info *); + + const struct ide_port_ops *port_ops; + const struct ide_dma_ops *dma_ops; + ide_pci_enablebit_t enablebits[2]; hwif_chipset_t chipset; - u8 extra; u32 host_flags; u8 pio_mask; u8 swdma_mask; @@ -1148,13 +1146,16 @@ void ide_destroy_dmatable(ide_drive_t *); #ifdef CONFIG_BLK_DEV_IDEDMA_SFF extern int ide_build_dmatable(ide_drive_t *, struct request *); -extern int ide_release_dma(ide_hwif_t *); -extern void ide_setup_dma(ide_hwif_t *, unsigned long); +int ide_allocate_dma_engine(ide_hwif_t *); +void ide_release_dma_engine(ide_hwif_t *); +void ide_setup_dma(ide_hwif_t *, unsigned long); void ide_dma_host_set(ide_drive_t *, int); extern int ide_dma_setup(ide_drive_t *); +void ide_dma_exec_cmd(ide_drive_t *, u8); extern void ide_dma_start(ide_drive_t *); extern int __ide_dma_end(ide_drive_t *); +int ide_dma_test_irq(ide_drive_t *); extern void ide_dma_lost_irq(ide_drive_t *); extern void ide_dma_timeout(ide_drive_t *); #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */ @@ -1172,7 +1173,7 @@ static inline void ide_check_dma_crc(ide_drive_t *drive) { ; } #endif /* CONFIG_BLK_DEV_IDEDMA */ #ifndef CONFIG_BLK_DEV_IDEDMA_SFF -static inline void ide_release_dma(ide_hwif_t *drive) {;} +static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; } #endif #ifdef CONFIG_BLK_DEV_IDEACPI @@ -1192,17 +1193,20 @@ static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {} #endif void ide_remove_port_from_hwgroup(ide_hwif_t *); -extern int ide_hwif_request_regions(ide_hwif_t *hwif); -extern void ide_hwif_release_regions(ide_hwif_t* hwif); -void ide_unregister(unsigned int, int, int); +void ide_unregister(ide_hwif_t *); void ide_register_region(struct gendisk *); void ide_unregister_region(struct gendisk *); void ide_undecoded_slave(ide_drive_t *); +void ide_port_apply_params(ide_hwif_t *); + int ide_device_add_all(u8 *idx, const struct ide_port_info *); int ide_device_add(u8 idx[4], const struct ide_port_info *); +int ide_legacy_device_add(const struct ide_port_info *, unsigned long); +void ide_port_unregister_devices(ide_hwif_t *); +void ide_port_scan(ide_hwif_t *); static inline void *ide_get_hwifdata (ide_hwif_t * hwif) { @@ -1278,6 +1282,7 @@ extern struct mutex ide_cfg_mtx; #define local_irq_set(flags) do { local_save_flags((flags)); local_irq_enable_in_hardirq(); } while (0) extern struct bus_type ide_bus_type; +extern struct class *ide_port_class; /* check if CACHE FLUSH (EXT) command is supported (bits defined in ATA-6) */ #define ide_id_has_flush_cache(id) ((id)->cfs_enable_2 & 0x3000) @@ -1306,7 +1311,10 @@ static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive) static inline void ide_set_irq(ide_drive_t *drive, int on) { - drive->hwif->OUTB(drive->ctl | (on ? 0 : 2), IDE_CONTROL_REG); + ide_hwif_t *hwif = drive->hwif; + + hwif->OUTB(drive->ctl | (on ? 0 : 2), + hwif->io_ports[IDE_CONTROL_OFFSET]); } static inline u8 ide_read_status(ide_drive_t *drive) @@ -1330,4 +1338,26 @@ static inline u8 ide_read_error(ide_drive_t *drive) return hwif->INB(hwif->io_ports[IDE_ERROR_OFFSET]); } +/* + * Too bad. The drive wants to send us data which we are not ready to accept. + * Just throw it away. + */ +static inline void ide_atapi_discard_data(ide_drive_t *drive, unsigned bcount) +{ + ide_hwif_t *hwif = drive->hwif; + + /* FIXME: use ->atapi_input_bytes */ + while (bcount--) + (void)hwif->INB(hwif->io_ports[IDE_DATA_OFFSET]); +} + +static inline void ide_atapi_write_zeros(ide_drive_t *drive, unsigned bcount) +{ + ide_hwif_t *hwif = drive->hwif; + + /* FIXME: use ->atapi_output_bytes */ + while (bcount--) + hwif->OUTB(0, hwif->io_ports[IDE_DATA_OFFSET]); +} + #endif /* _IDE_H */ |