summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2020-12-11 16:16:52 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2020-12-11 16:16:52 +0100
commit007e3370806da1bbe83d0b43a04f420ae2e19dbb (patch)
treeac64737e4307f6ce1756b28ce8416580300b7942
parentb5206275b46c30a8236feb34a1dc247fa3683d83 (diff)
parentfddd408ad448efc49c67f8dfdc4e86b31c683a0c (diff)
Merge tag 'usb-serial-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes: USB-serial updates for 5.11-rc1 Here are the USB-serial updates for 5.11-rc1, including: - keyspan_pda write-implementation fixes - digi_acceleport write-wakeup fix - mos7720 parport-restore fix - mos7720 parport-tasklet removal - cp210x termios-handling cleanups - option device-flag fix - ftdi_sio GPIO CBUS-configuration improvements - removal of in_interrupt() uses Included are also various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (30 commits) USB: serial: ftdi_sio: log the CBUS GPIO validity USB: serial: ftdi_sio: drop GPIO line checking dead code USB: serial: ftdi_sio: report the valid GPIO lines to gpiolib USB: serial: option: add interface-number sanity check to flag handling USB: serial: cp210x: clean up dtr_rts() USB: serial: cp210x: refactor flow-control handling USB: serial: cp210x: drop flow-control debugging USB: serial: cp210x: set terminal settings on open USB: serial: cp210x: clean up line-control handling USB: serial: cp210x: return early on unchanged termios USB: serial: mos7720: defer state restore to a workqueue USB: serial: mos7720: fix parallel-port state restore USB: serial: remove write wait queue USB: serial: digi_acceleport: fix write-wakeup deadlocks USB: serial: keyspan_pda: drop redundant usb-serial pointer USB: serial: keyspan_pda: use BIT() macro USB: serial: keyspan_pda: clean up comments and whitespace USB: serial: keyspan_pda: clean up xircom/entrega support USB: serial: keyspan_pda: add write-fifo support USB: serial: keyspan_pda: increase transmitter threshold ...
-rw-r--r--arch/arm/configs/badge4_defconfig1
-rw-r--r--arch/arm/configs/corgi_defconfig1
-rw-r--r--arch/arm/configs/pxa_defconfig1
-rw-r--r--arch/arm/configs/spitz_defconfig1
-rw-r--r--arch/mips/configs/mtx1_defconfig1
-rw-r--r--arch/mips/configs/rm200_defconfig1
-rw-r--r--arch/powerpc/configs/g5_defconfig1
-rw-r--r--arch/powerpc/configs/ppc6xx_defconfig1
-rw-r--r--drivers/usb/serial/Kconfig19
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/cp210x.c499
-rw-r--r--drivers/usb/serial/digi_acceleport.c62
-rw-r--r--drivers/usb/serial/ftdi_sio.c23
-rw-r--r--drivers/usb/serial/iuu_phoenix.c2
-rw-r--r--drivers/usb/serial/keyspan_pda.c548
-rw-r--r--drivers/usb/serial/mos7720.c236
-rw-r--r--drivers/usb/serial/option.c23
-rw-r--r--include/linux/usb/serial.h2
18 files changed, 444 insertions, 979 deletions
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index ef484c4cfd1a..d9119da65f48 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -89,7 +89,6 @@ CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 4fec2ec379ad..911e880f06ed 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -191,7 +191,6 @@ CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index d7b9eaf4783c..8654ece13004 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -574,7 +574,6 @@ CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index a1cdbfa064c5..8b2c14424927 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -185,7 +185,6 @@ CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index 914af125a7fa..9750bcc38f05 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -565,7 +565,6 @@ CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EMI62=m
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 30d7c3db884e..3dc2da2bee0d 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -311,7 +311,6 @@ CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 1c674c4c1d86..1de0dbf6cbba 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -194,7 +194,6 @@ CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_EXT2_FS=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 66e9a0fd64ff..ac92cbe1f581 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -911,7 +911,6 @@ CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 4007fa25a8ff..a21ff5ab6df9 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -298,12 +298,12 @@ config USB_SERIAL_IUU
module will be called iuu_phoenix.o
config USB_SERIAL_KEYSPAN_PDA
- tristate "USB Keyspan PDA Single Port Serial Driver"
+ tristate "USB Keyspan PDA / Xircom Single Port Serial Driver"
select USB_EZUSB_FX2
help
- Say Y here if you want to use a Keyspan PDA single port USB to
- serial converter device. This driver makes use of firmware
- developed from scratch by Brian Warner.
+ Say Y here if you want to use a Keyspan PDA, Xircom or Entrega single
+ port USB to serial converter device. This driver makes use of
+ firmware developed from scratch by Brian Warner.
To compile this driver as a module, choose M here: the
module will be called keyspan_pda.
@@ -538,17 +538,6 @@ config USB_SERIAL_CYBERJACK
If unsure, say N.
-config USB_SERIAL_XIRCOM
- tristate "USB Xircom / Entrega Single Port Serial Driver"
- select USB_EZUSB_FX2
- help
- Say Y here if you want to use a Xircom or Entrega single port USB to
- serial converter device. This driver makes use of firmware
- developed from scratch by Brian Warner.
-
- To compile this driver as a module, choose M here: the
- module will be called keyspan_pda.
-
config USB_SERIAL_WWAN
tristate
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 2d491e434f11..50c53aed787a 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -61,5 +61,4 @@ obj-$(CONFIG_USB_SERIAL_UPD78F0730) += upd78f0730.o
obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o
obj-$(CONFIG_USB_SERIAL_WISHBONE) += wishbone-serial.o
obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o
-obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o
obj-$(CONFIG_USB_SERIAL_XSENS_MT) += xsens_mt.o
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index d0c05aa8a0d6..fbb10dfc56e3 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -31,9 +31,6 @@
*/
static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
static void cp210x_close(struct usb_serial_port *);
-static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *);
-static void cp210x_get_termios_port(struct usb_serial_port *port,
- tcflag_t *cflagp, unsigned int *baudp);
static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
struct ktermios *);
static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
@@ -49,7 +46,7 @@ static void cp210x_disconnect(struct usb_serial *);
static void cp210x_release(struct usb_serial *);
static int cp210x_port_probe(struct usb_serial_port *);
static int cp210x_port_remove(struct usb_serial_port *);
-static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
+static void cp210x_dtr_rts(struct usb_serial_port *port, int on);
static void cp210x_process_read_urb(struct urb *urb);
static void cp210x_enable_event_mode(struct usb_serial_port *port);
static void cp210x_disable_event_mode(struct usb_serial_port *port);
@@ -267,7 +264,6 @@ enum cp210x_event_state {
struct cp210x_port_private {
u8 bInterfaceNumber;
- bool has_swapped_line_ctl;
bool event_mode;
enum cp210x_event_state event_state;
u8 lsr;
@@ -559,14 +555,8 @@ static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
int result;
dmabuf = kmalloc(bufsize, GFP_KERNEL);
- if (!dmabuf) {
- /*
- * FIXME Some callers don't bother to check for error,
- * at least give them consistent junk until they are fixed
- */
- memset(buf, 0, bufsize);
+ if (!dmabuf)
return -ENOMEM;
- }
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
req, REQTYPE_INTERFACE_TO_HOST, 0,
@@ -580,12 +570,6 @@ static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
req, bufsize, result);
if (result >= 0)
result = -EIO;
-
- /*
- * FIXME Some callers don't bother to check for error,
- * at least give them consistent junk until they are fixed
- */
- memset(buf, 0, bufsize);
}
kfree(dmabuf);
@@ -594,46 +578,6 @@ static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
}
/*
- * Reads any 32-bit CP210X_ register identified by req.
- */
-static int cp210x_read_u32_reg(struct usb_serial_port *port, u8 req, u32 *val)
-{
- __le32 le32_val;
- int err;
-
- err = cp210x_read_reg_block(port, req, &le32_val, sizeof(le32_val));
- if (err) {
- /*
- * FIXME Some callers don't bother to check for error,
- * at least give them consistent junk until they are fixed
- */
- *val = 0;
- return err;
- }
-
- *val = le32_to_cpu(le32_val);
-
- return 0;
-}
-
-/*
- * Reads any 16-bit CP210X_ register identified by req.
- */
-static int cp210x_read_u16_reg(struct usb_serial_port *port, u8 req, u16 *val)
-{
- __le16 le16_val;
- int err;
-
- err = cp210x_read_reg_block(port, req, &le16_val, sizeof(le16_val));
- if (err)
- return err;
-
- *val = le16_to_cpu(le16_val);
-
- return 0;
-}
-
-/*
* Reads any 8-bit CP210X_ register identified by req.
*/
static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val)
@@ -780,59 +724,6 @@ static int cp210x_write_vendor_block(struct usb_serial *serial, u8 type,
}
#endif
-/*
- * Detect CP2108 GET_LINE_CTL bug and activate workaround.
- * Write a known good value 0x800, read it back.
- * If it comes back swapped the bug is detected.
- * Preserve the original register value.
- */
-static int cp210x_detect_swapped_line_ctl(struct usb_serial_port *port)
-{
- struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
- u16 line_ctl_save;
- u16 line_ctl_test;
- int err;
-
- err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_save);
- if (err)
- return err;
-
- err = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, 0x800);
- if (err)
- return err;
-
- err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_test);
- if (err)
- return err;
-
- if (line_ctl_test == 8) {
- port_priv->has_swapped_line_ctl = true;
- line_ctl_save = swab16(line_ctl_save);
- }
-
- return cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, line_ctl_save);
-}
-
-/*
- * Must always be called instead of cp210x_read_u16_reg(CP210X_GET_LINE_CTL)
- * to workaround cp2108 bug and get correct value.
- */
-static int cp210x_get_line_ctl(struct usb_serial_port *port, u16 *ctl)
-{
- struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
- int err;
-
- err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, ctl);
- if (err)
- return err;
-
- /* Workaround swapped bytes in 16-bit value from CP210X_GET_LINE_CTL */
- if (port_priv->has_swapped_line_ctl)
- *ctl = swab16(*ctl);
-
- return 0;
-}
-
static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
@@ -844,16 +735,8 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
return result;
}
- /* Configure the termios structure */
- cp210x_get_termios(tty, port);
-
- if (tty) {
- /* The baud rate must be initialised on cp2104 */
- cp210x_change_speed(tty, port, NULL);
-
- if (I_INPCK(tty))
- cp210x_enable_event_mode(port);
- }
+ if (tty)
+ cp210x_set_termios(tty, port, NULL);
result = usb_serial_generic_open(tty, port);
if (result)
@@ -1032,167 +915,6 @@ static bool cp210x_tx_empty(struct usb_serial_port *port)
return !count;
}
-/*
- * cp210x_get_termios
- * Reads the baud rate, data bits, parity, stop bits and flow control mode
- * from the device, corrects any unsupported values, and configures the
- * termios structure to reflect the state of the device
- */
-static void cp210x_get_termios(struct tty_struct *tty,
- struct usb_serial_port *port)
-{
- unsigned int baud;
-
- if (tty) {
- cp210x_get_termios_port(tty->driver_data,
- &tty->termios.c_cflag, &baud);
- tty_encode_baud_rate(tty, baud, baud);
- } else {
- tcflag_t cflag;
- cflag = 0;
- cp210x_get_termios_port(port, &cflag, &baud);
- }
-}
-
-/*
- * cp210x_get_termios_port
- * This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
- */
-static void cp210x_get_termios_port(struct usb_serial_port *port,
- tcflag_t *cflagp, unsigned int *baudp)
-{
- struct device *dev = &port->dev;
- tcflag_t cflag;
- struct cp210x_flow_ctl flow_ctl;
- u32 baud;
- u16 bits;
- u32 ctl_hs;
- u32 flow_repl;
-
- cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
-
- dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
- *baudp = baud;
-
- cflag = *cflagp;
-
- cp210x_get_line_ctl(port, &bits);
- cflag &= ~CSIZE;
- switch (bits & BITS_DATA_MASK) {
- case BITS_DATA_5:
- dev_dbg(dev, "%s - data bits = 5\n", __func__);
- cflag |= CS5;
- break;
- case BITS_DATA_6:
- dev_dbg(dev, "%s - data bits = 6\n", __func__);
- cflag |= CS6;
- break;
- case BITS_DATA_7:
- dev_dbg(dev, "%s - data bits = 7\n", __func__);
- cflag |= CS7;
- break;
- case BITS_DATA_8:
- dev_dbg(dev, "%s - data bits = 8\n", __func__);
- cflag |= CS8;
- break;
- case BITS_DATA_9:
- dev_dbg(dev, "%s - data bits = 9 (not supported, using 8 data bits)\n", __func__);
- cflag |= CS8;
- bits &= ~BITS_DATA_MASK;
- bits |= BITS_DATA_8;
- cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
- break;
- default:
- dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__);
- cflag |= CS8;
- bits &= ~BITS_DATA_MASK;
- bits |= BITS_DATA_8;
- cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
- break;
- }
-
- switch (bits & BITS_PARITY_MASK) {
- case BITS_PARITY_NONE:
- dev_dbg(dev, "%s - parity = NONE\n", __func__);
- cflag &= ~PARENB;
- break;
- case BITS_PARITY_ODD:
- dev_dbg(dev, "%s - parity = ODD\n", __func__);
- cflag |= (PARENB|PARODD);
- break;
- case BITS_PARITY_EVEN:
- dev_dbg(dev, "%s - parity = EVEN\n", __func__);
- cflag &= ~PARODD;
- cflag |= PARENB;
- break;
- case BITS_PARITY_MARK:
- dev_dbg(dev, "%s - parity = MARK\n", __func__);
- cflag |= (PARENB|PARODD|CMSPAR);
- break;
- case BITS_PARITY_SPACE:
- dev_dbg(dev, "%s - parity = SPACE\n", __func__);
- cflag &= ~PARODD;
- cflag |= (PARENB|CMSPAR);
- break;
- default:
- dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__);
- cflag &= ~PARENB;
- bits &= ~BITS_PARITY_MASK;
- cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
- break;
- }
-
- cflag &= ~CSTOPB;
- switch (bits & BITS_STOP_MASK) {
- case BITS_STOP_1:
- dev_dbg(dev, "%s - stop bits = 1\n", __func__);
- break;
- case BITS_STOP_1_5:
- dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__);
- bits &= ~BITS_STOP_MASK;
- cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
- break;
- case BITS_STOP_2:
- dev_dbg(dev, "%s - stop bits = 2\n", __func__);
- cflag |= CSTOPB;
- break;
- default:
- dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__);
- bits &= ~BITS_STOP_MASK;
- cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
- break;
- }
-
- cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
- sizeof(flow_ctl));
- ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
- if (ctl_hs & CP210X_SERIAL_CTS_HANDSHAKE) {
- dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
- /*
- * When the port is closed, the CP210x hardware disables
- * auto-RTS and RTS is deasserted but it leaves auto-CTS when
- * in hardware flow control mode. When re-opening the port, if
- * auto-CTS is enabled on the cp210x, then auto-RTS must be
- * re-enabled in the driver.
- */
- flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
- flow_repl &= ~CP210X_SERIAL_RTS_MASK;
- flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_FLOW_CTL);
- flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
- cp210x_write_reg_block(port,
- CP210X_SET_FLOW,
- &flow_ctl,
- sizeof(flow_ctl));
-
- cflag |= CRTSCTS;
- } else {
- dev_dbg(dev, "%s - flow control = NONE\n", __func__);
- cflag &= ~CRTSCTS;
- }
-
- *cflagp = cflag;
-}
-
struct cp210x_rate {
speed_t rate;
speed_t high;
@@ -1352,127 +1074,121 @@ static void cp210x_disable_event_mode(struct usb_serial_port *port)
port_priv->event_mode = false;
}
+static bool cp210x_termios_change(const struct ktermios *a, const struct ktermios *b)
+{
+ bool iflag_change;
+
+ iflag_change = ((a->c_iflag ^ b->c_iflag) & INPCK);
+
+ return tty_termios_hw_change(a, b) || iflag_change;
+}
+
+static void cp210x_set_flow_control(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
+{
+ struct cp210x_flow_ctl flow_ctl;
+ u32 flow_repl;
+ u32 ctl_hs;
+ int ret;
+
+ if (old_termios && C_CRTSCTS(tty) == (old_termios->c_cflag & CRTSCTS))
+ return;
+
+ ret = cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
+ sizeof(flow_ctl));
+ if (ret)
+ return;
+
+ ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
+ flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
+
+ ctl_hs &= ~CP210X_SERIAL_DSR_HANDSHAKE;
+ ctl_hs &= ~CP210X_SERIAL_DCD_HANDSHAKE;
+ ctl_hs &= ~CP210X_SERIAL_DSR_SENSITIVITY;
+ ctl_hs &= ~CP210X_SERIAL_DTR_MASK;
+ ctl_hs |= CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_ACTIVE);
+
+ if (C_CRTSCTS(tty)) {
+ ctl_hs |= CP210X_SERIAL_CTS_HANDSHAKE;
+ flow_repl &= ~CP210X_SERIAL_RTS_MASK;
+ flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_FLOW_CTL);
+ } else {
+ ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE;
+ flow_repl &= ~CP210X_SERIAL_RTS_MASK;
+ flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_ACTIVE);
+ }
+
+ dev_dbg(&port->dev, "%s - ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
+ __func__, ctl_hs, flow_repl);
+
+ flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs);
+ flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
+
+ cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
+ sizeof(flow_ctl));
+}
+
static void cp210x_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
- struct device *dev = &port->dev;
- unsigned int cflag, old_cflag;
+ struct cp210x_serial_private *priv = usb_get_serial_data(port->serial);
u16 bits;
+ int ret;
- cflag = tty->termios.c_cflag;
- old_cflag = old_termios->c_cflag;
+ if (old_termios && !cp210x_termios_change(&tty->termios, old_termios))
+ return;
- if (tty->termios.c_ospeed != old_termios->c_ospeed)
+ if (!old_termios || tty->termios.c_ospeed != old_termios->c_ospeed)
cp210x_change_speed(tty, port, old_termios);
- /* If the number of data bits is to be updated */
- if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
- cp210x_get_line_ctl(port, &bits);
- bits &= ~BITS_DATA_MASK;
- switch (cflag & CSIZE) {
- case CS5:
- bits |= BITS_DATA_5;
- dev_dbg(dev, "%s - data bits = 5\n", __func__);
- break;
- case CS6:
- bits |= BITS_DATA_6;
- dev_dbg(dev, "%s - data bits = 6\n", __func__);
- break;
- case CS7:
- bits |= BITS_DATA_7;
- dev_dbg(dev, "%s - data bits = 7\n", __func__);
- break;
- case CS8:
- default:
- bits |= BITS_DATA_8;
- dev_dbg(dev, "%s - data bits = 8\n", __func__);
- break;
- }
- if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
- dev_dbg(dev, "Number of data bits requested not supported by device\n");
+ /* CP2101 only supports CS8, 1 stop bit and non-stick parity. */
+ if (priv->partnum == CP210X_PARTNUM_CP2101) {
+ tty->termios.c_cflag &= ~(CSIZE | CSTOPB | CMSPAR);
+ tty->termios.c_cflag |= CS8;
}
- if ((cflag & (PARENB|PARODD|CMSPAR)) !=
- (old_cflag & (PARENB|PARODD|CMSPAR))) {
- cp210x_get_line_ctl(port, &bits);
- bits &= ~BITS_PARITY_MASK;
- if (cflag & PARENB) {
- if (cflag & CMSPAR) {
- if (cflag & PARODD) {
- bits |= BITS_PARITY_MARK;
- dev_dbg(dev, "%s - parity = MARK\n", __func__);
- } else {
- bits |= BITS_PARITY_SPACE;
- dev_dbg(dev, "%s - parity = SPACE\n", __func__);
- }
- } else {
- if (cflag & PARODD) {
- bits |= BITS_PARITY_ODD;
- dev_dbg(dev, "%s - parity = ODD\n", __func__);
- } else {
- bits |= BITS_PARITY_EVEN;
- dev_dbg(dev, "%s - parity = EVEN\n", __func__);
- }
- }
- }
- if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
- dev_dbg(dev, "Parity mode not supported by device\n");
+ bits = 0;
+
+ switch (C_CSIZE(tty)) {
+ case CS5:
+ bits |= BITS_DATA_5;
+ break;
+ case CS6:
+ bits |= BITS_DATA_6;
+ break;
+ case CS7:
+ bits |= BITS_DATA_7;
+ break;
+ case CS8:
+ default:
+ bits |= BITS_DATA_8;
+ break;
}
- if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
- cp210x_get_line_ctl(port, &bits);
- bits &= ~BITS_STOP_MASK;
- if (cflag & CSTOPB) {
- bits |= BITS_STOP_2;
- dev_dbg(dev, "%s - stop bits = 2\n", __func__);
+ if (C_PARENB(tty)) {
+ if (C_CMSPAR(tty)) {
+ if (C_PARODD(tty))
+ bits |= BITS_PARITY_MARK;
+ else
+ bits |= BITS_PARITY_SPACE;
} else {
- bits |= BITS_STOP_1;
- dev_dbg(dev, "%s - stop bits = 1\n", __func__);
+ if (C_PARODD(tty))
+ bits |= BITS_PARITY_ODD;
+ else
+ bits |= BITS_PARITY_EVEN;
}
- if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
- dev_dbg(dev, "Number of stop bits requested not supported by device\n");
}
- if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
- struct cp210x_flow_ctl flow_ctl;
- u32 ctl_hs;
- u32 flow_repl;
-
- cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
- sizeof(flow_ctl));
- ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
- flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
- dev_dbg(dev, "%s - read ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
- __func__, ctl_hs, flow_repl);
-
- ctl_hs &= ~CP210X_SERIAL_DSR_HANDSHAKE;
- ctl_hs &= ~CP210X_SERIAL_DCD_HANDSHAKE;
- ctl_hs &= ~CP210X_SERIAL_DSR_SENSITIVITY;
- ctl_hs &= ~CP210X_SERIAL_DTR_MASK;
- ctl_hs |= CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_ACTIVE);
- if (cflag & CRTSCTS) {
- ctl_hs |= CP210X_SERIAL_CTS_HANDSHAKE;
-
- flow_repl &= ~CP210X_SERIAL_RTS_MASK;
- flow_repl |= CP210X_SERIAL_RTS_SHIFT(
- CP210X_SERIAL_RTS_FLOW_CTL);
- dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
- } else {
- ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE;
+ if (C_CSTOPB(tty))
+ bits |= BITS_STOP_2;
+ else
+ bits |= BITS_STOP_1;
- flow_repl &= ~CP210X_SERIAL_RTS_MASK;
- flow_repl |= CP210X_SERIAL_RTS_SHIFT(
- CP210X_SERIAL_RTS_ACTIVE);
- dev_dbg(dev, "%s - flow control = NONE\n", __func__);
- }
+ ret = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
+ if (ret)
+ dev_err(&port->dev, "failed to set line control: %d\n", ret);
- dev_dbg(dev, "%s - write ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
- __func__, ctl_hs, flow_repl);
- flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs);
- flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
- cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
- sizeof(flow_ctl));
- }
+ cp210x_set_flow_control(tty, port, old_termios);
/*
* Enable event-insertion mode only if input parity checking is
@@ -1518,12 +1234,12 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
return cp210x_write_u16_reg(port, CP210X_SET_MHS, control);
}
-static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
+static void cp210x_dtr_rts(struct usb_serial_port *port, int on)
{
if (on)
- cp210x_tiocmset_port(p, TIOCM_DTR|TIOCM_RTS, 0);
+ cp210x_tiocmset_port(port, TIOCM_DTR | TIOCM_RTS, 0);
else
- cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS);
+ cp210x_tiocmset_port(port, 0, TIOCM_DTR | TIOCM_RTS);
}
static int cp210x_tiocmget(struct tty_struct *tty)
@@ -1986,7 +1702,6 @@ static int cp210x_port_probe(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct cp210x_port_private *port_priv;
- int ret;
port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
if (!port_priv)
@@ -1996,12 +1711,6 @@ static int cp210x_port_probe(struct usb_serial_port *port)
usb_set_serial_port_data(port, port_priv);
- ret = cp210x_detect_swapped_line_ctl(port);
- if (ret) {
- kfree(port_priv);
- return ret;
- }
-
return 0;
}
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 91055a191995..0ecd5316d85f 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -19,7 +19,6 @@
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
-#include <linux/workqueue.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/wait.h>
@@ -198,14 +197,13 @@ struct digi_port {
int dp_throttle_restart;
wait_queue_head_t dp_flush_wait;
wait_queue_head_t dp_close_wait; /* wait queue for close */
- struct work_struct dp_wakeup_work;
+ wait_queue_head_t write_wait;
struct usb_serial_port *dp_port;
};
/* Local Function Declarations */
-static void digi_wakeup_write_lock(struct work_struct *work);
static int digi_write_oob_command(struct usb_serial_port *port,
unsigned char *buf, int count, int interruptible);
static int digi_write_inb_command(struct usb_serial_port *port,
@@ -356,26 +354,6 @@ __releases(lock)
return timeout;
}
-
-/*
- * Digi Wakeup Write
- *
- * Wake up port, line discipline, and tty processes sleeping
- * on writes.
- */
-
-static void digi_wakeup_write_lock(struct work_struct *work)
-{
- struct digi_port *priv =
- container_of(work, struct digi_port, dp_wakeup_work);
- struct usb_serial_port *port = priv->dp_port;
- unsigned long flags;
-
- spin_lock_irqsave(&priv->dp_port_lock, flags);
- tty_port_tty_wakeup(&port->port);
- spin_unlock_irqrestore(&priv->dp_port_lock, flags);
-}
-
/*
* Digi Write OOB Command
*
@@ -404,7 +382,7 @@ static int digi_write_oob_command(struct usb_serial_port *port,
while (count > 0) {
while (oob_priv->dp_write_urb_in_use) {
cond_wait_interruptible_timeout_irqrestore(
- &oob_port->write_wait, DIGI_RETRY_TIMEOUT,
+ &oob_priv->write_wait, DIGI_RETRY_TIMEOUT,
&oob_priv->dp_port_lock, flags);
if (interruptible && signal_pending(current))
return -EINTR;
@@ -467,7 +445,7 @@ static int digi_write_inb_command(struct usb_serial_port *port,
while (priv->dp_write_urb_in_use &&
time_before(jiffies, timeout)) {
cond_wait_interruptible_timeout_irqrestore(
- &port->write_wait, DIGI_RETRY_TIMEOUT,
+ &priv->write_wait, DIGI_RETRY_TIMEOUT,
&priv->dp_port_lock, flags);
if (signal_pending(current))
return -EINTR;
@@ -546,7 +524,7 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
while (oob_priv->dp_write_urb_in_use) {
spin_unlock(&port_priv->dp_port_lock);
cond_wait_interruptible_timeout_irqrestore(
- &oob_port->write_wait, DIGI_RETRY_TIMEOUT,
+ &oob_priv->write_wait, DIGI_RETRY_TIMEOUT,
&oob_priv->dp_port_lock, flags);
if (interruptible && signal_pending(current))
return -EINTR;
@@ -911,9 +889,8 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
unsigned char *data = port->write_urb->transfer_buffer;
unsigned long flags = 0;
- dev_dbg(&port->dev,
- "digi_write: TOP: port=%d, count=%d, in_interrupt=%ld\n",
- priv->dp_port_num, count, in_interrupt());
+ dev_dbg(&port->dev, "digi_write: TOP: port=%d, count=%d\n",
+ priv->dp_port_num, count);
/* copy user data (which can sleep) before getting spin lock */
count = min(count, port->bulk_out_size-2);
@@ -986,6 +963,7 @@ static void digi_write_bulk_callback(struct urb *urb)
unsigned long flags;
int ret = 0;
int status = urb->status;
+ bool wakeup;
/* port and serial sanity check */
if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
@@ -1006,12 +984,13 @@ static void digi_write_bulk_callback(struct urb *urb)
dev_dbg(&port->dev, "digi_write_bulk_callback: oob callback\n");
spin_lock_irqsave(&priv->dp_port_lock, flags);
priv->dp_write_urb_in_use = 0;
- wake_up_interruptible(&port->write_wait);
+ wake_up_interruptible(&priv->write_wait);
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
return;
}
/* try to send any buffered data on this port */
+ wakeup = true;
spin_lock_irqsave(&priv->dp_port_lock, flags);
priv->dp_write_urb_in_use = 0;
if (priv->dp_out_buf_len > 0) {
@@ -1027,19 +1006,18 @@ static void digi_write_bulk_callback(struct urb *urb)
if (ret == 0) {
priv->dp_write_urb_in_use = 1;
priv->dp_out_buf_len = 0;
+ wakeup = false;
}
}
- /* wake up processes sleeping on writes immediately */
- tty_port_tty_wakeup(&port->port);
- /* also queue up a wakeup at scheduler time, in case we */
- /* lost the race in write_chan(). */
- schedule_work(&priv->dp_wakeup_work);
-
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
if (ret && ret != -EPERM)
dev_err_console(port,
"%s: usb_submit_urb failed, ret=%d, port=%d\n",
__func__, ret, priv->dp_port_num);
+
+ if (wakeup)
+ tty_port_tty_wakeup(&port->port);
}
static int digi_write_room(struct tty_struct *tty)
@@ -1239,11 +1217,9 @@ static int digi_port_init(struct usb_serial_port *port, unsigned port_num)
init_waitqueue_head(&priv->dp_transmit_idle_wait);
init_waitqueue_head(&priv->dp_flush_wait);
init_waitqueue_head(&priv->dp_close_wait);
- INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock);
+ init_waitqueue_head(&priv->write_wait);
priv->dp_port = port;
- init_waitqueue_head(&port->write_wait);
-
usb_set_serial_port_data(port, priv);
return 0;
@@ -1508,13 +1484,14 @@ static int digi_read_oob_callback(struct urb *urb)
rts = C_CRTSCTS(tty);
if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
+ bool wakeup = false;
+
spin_lock_irqsave(&priv->dp_port_lock, flags);
/* convert from digi flags to termiox flags */
if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
priv->dp_modem_signals |= TIOCM_CTS;
- /* port must be open to use tty struct */
if (rts)
- tty_port_tty_wakeup(&port->port);
+ wakeup = true;
} else {
priv->dp_modem_signals &= ~TIOCM_CTS;
/* port must be open to use tty struct */
@@ -1533,6 +1510,9 @@ static int digi_read_oob_callback(struct urb *urb)
priv->dp_modem_signals &= ~TIOCM_CD;
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
+
+ if (wakeup)
+ tty_port_tty_wakeup(&port->port);
} else if (opcode == DIGI_CMD_TRANSMIT_IDLE) {
spin_lock_irqsave(&priv->dp_port_lock, flags);
priv->dp_transmit_idle = 1;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index e0f4c3d9649c..94398f89e600 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1841,9 +1841,6 @@ static int ftdi_gpio_request(struct gpio_chip *gc, unsigned int offset)
struct ftdi_private *priv = usb_get_serial_port_data(port);
int result;
- if (priv->gpio_altfunc & BIT(offset))
- return -ENODEV;
-
mutex_lock(&priv->gpio_lock);
if (!priv->gpio_used) {
/* Set default pin states, as we cannot get them from device */
@@ -2002,6 +1999,25 @@ static int ftdi_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio,
return result;
}
+static int ftdi_gpio_init_valid_mask(struct gpio_chip *gc,
+ unsigned long *valid_mask,
+ unsigned int ngpios)
+{
+ struct usb_serial_port *port = gpiochip_get_data(gc);
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ unsigned long map = priv->gpio_altfunc;
+
+ bitmap_complement(valid_mask, &map, ngpios);
+
+ if (bitmap_empty(valid_mask, ngpios))
+ dev_dbg(&port->dev, "no CBUS pin configured for GPIO\n");
+ else
+ dev_dbg(&port->dev, "CBUS%*pbl configured for GPIO\n", ngpios,
+ valid_mask);
+
+ return 0;
+}
+
static int ftdi_read_eeprom(struct usb_serial *serial, void *dst, u16 addr,
u16 nbytes)
{
@@ -2173,6 +2189,7 @@ static int ftdi_gpio_init(struct usb_serial_port *port)
priv->gc.get_direction = ftdi_gpio_direction_get;
priv->gc.direction_input = ftdi_gpio_direction_input;
priv->gc.direction_output = ftdi_gpio_direction_output;
+ priv->gc.init_valid_mask = ftdi_gpio_init_valid_mask;
priv->gc.get = ftdi_gpio_get;
priv->gc.set = ftdi_gpio_set;
priv->gc.get_multiple = ftdi_gpio_get_multiple;
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index b4ba79123d9d..f1201d4de297 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -850,7 +850,6 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base,
default:
kfree(dataout);
return IUU_INVALID_PARAMETER;
- break;
}
switch (parity & 0xF0) {
@@ -864,7 +863,6 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base,
default:
kfree(dataout);
return IUU_INVALID_PARAMETER;
- break;
}
status = bulk_immediate(port, dataout, DataCount);
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index c1333919716b..e6f933e8d25f 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -5,12 +5,12 @@
* Copyright (C) 1999 - 2001 Greg Kroah-Hartman <greg@kroah.com>
* Copyright (C) 1999, 2000 Brian Warner <warner@lothar.com>
* Copyright (C) 2000 Al Borchers <borchers@steinerpoint.com>
+ * Copyright (C) 2020 Johan Hovold <johan@kernel.org>
*
* See Documentation/usb/usb-serial.rst for more information on using this
* driver
*/
-
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
@@ -25,30 +25,19 @@
#include <linux/usb/serial.h>
#include <linux/usb/ezusb.h>
-/* make a simple define to handle if we are compiling keyspan_pda or xircom support */
-#if IS_ENABLED(CONFIG_USB_SERIAL_KEYSPAN_PDA)
- #define KEYSPAN
-#else
- #undef KEYSPAN
-#endif
-#if IS_ENABLED(CONFIG_USB_SERIAL_XIRCOM)
- #define XIRCOM
-#else
- #undef XIRCOM
-#endif
-
-#define DRIVER_AUTHOR "Brian Warner <warner@lothar.com>"
+#define DRIVER_AUTHOR "Brian Warner <warner@lothar.com>, Johan Hovold <johan@kernel.org>"
#define DRIVER_DESC "USB Keyspan PDA Converter driver"
+#define KEYSPAN_TX_THRESHOLD 128
+
struct keyspan_pda_private {
int tx_room;
- int tx_throttled;
- struct work_struct wakeup_work;
- struct work_struct unthrottle_work;
+ struct work_struct unthrottle_work;
struct usb_serial *serial;
struct usb_serial_port *port;
};
+static int keyspan_pda_write_start(struct usb_serial_port *port);
#define KEYSPAN_VENDOR_ID 0x06cd
#define KEYSPAN_PDA_FAKE_ID 0x0103
@@ -62,18 +51,13 @@ struct keyspan_pda_private {
#define ENTREGA_FAKE_ID 0x8093
static const struct usb_device_id id_table_combined[] = {
-#ifdef KEYSPAN
{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
-#endif
-#ifdef XIRCOM
{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID_2) },
{ USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) },
-#endif
{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
{ } /* Terminating entry */
};
-
MODULE_DEVICE_TABLE(usb, id_table_combined);
static const struct usb_device_id id_table_std[] = {
@@ -81,46 +65,71 @@ static const struct usb_device_id id_table_std[] = {
{ } /* Terminating entry */
};
-#ifdef KEYSPAN
static const struct usb_device_id id_table_fake[] = {
{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
- { } /* Terminating entry */
-};
-#endif
-
-#ifdef XIRCOM
-static const struct usb_device_id id_table_fake_xircom[] = {
{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID_2) },
{ USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) },
- { }
+ { } /* Terminating entry */
};
-#endif
-static void keyspan_pda_wakeup_write(struct work_struct *work)
+static int keyspan_pda_get_write_room(struct keyspan_pda_private *priv)
{
- struct keyspan_pda_private *priv =
- container_of(work, struct keyspan_pda_private, wakeup_work);
struct usb_serial_port *port = priv->port;
+ struct usb_serial *serial = port->serial;
+ u8 *room;
+ int rc;
+
+ room = kmalloc(1, GFP_KERNEL);
+ if (!room)
+ return -ENOMEM;
- tty_port_tty_wakeup(&port->port);
+ rc = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 6, /* write_room */
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE
+ | USB_DIR_IN,
+ 0, /* value: 0 means "remaining room" */
+ 0, /* index */
+ room,
+ 1,
+ 2000);
+ if (rc != 1) {
+ if (rc >= 0)
+ rc = -EIO;
+ dev_dbg(&port->dev, "roomquery failed: %d\n", rc);
+ goto out_free;
+ }
+
+ dev_dbg(&port->dev, "roomquery says %d\n", *room);
+ rc = *room;
+out_free:
+ kfree(room);
+
+ return rc;
}
static void keyspan_pda_request_unthrottle(struct work_struct *work)
{
struct keyspan_pda_private *priv =
container_of(work, struct keyspan_pda_private, unthrottle_work);
- struct usb_serial *serial = priv->serial;
+ struct usb_serial_port *port = priv->port;
+ struct usb_serial *serial = port->serial;
+ unsigned long flags;
int result;
- /* ask the device to tell us when the tx buffer becomes
- sufficiently empty */
+ dev_dbg(&port->dev, "%s\n", __func__);
+
+ /*
+ * Ask the device to tell us when the tx buffer becomes
+ * sufficiently empty.
+ */
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
7, /* request_unthrottle */
USB_TYPE_VENDOR | USB_RECIP_INTERFACE
| USB_DIR_OUT,
- 16, /* value: threshold */
+ KEYSPAN_TX_THRESHOLD,
0, /* index */
NULL,
0,
@@ -128,9 +137,20 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
if (result < 0)
dev_dbg(&serial->dev->dev, "%s - error %d from usb_control_msg\n",
__func__, result);
+ /*
+ * Need to check available space after requesting notification in case
+ * buffer is already empty so that no notification is sent.
+ */
+ result = keyspan_pda_get_write_room(priv);
+ if (result > KEYSPAN_TX_THRESHOLD) {
+ spin_lock_irqsave(&port->lock, flags);
+ priv->tx_room = max(priv->tx_room, result);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ usb_serial_port_softint(port);
+ }
}
-
static void keyspan_pda_rx_interrupt(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
@@ -139,6 +159,8 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
int retval;
int status = urb->status;
struct keyspan_pda_private *priv;
+ unsigned long flags;
+
priv = usb_get_serial_port_data(port);
switch (status) {
@@ -172,18 +194,22 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
break;
case 1:
/* status interrupt */
- if (len < 3) {
+ if (len < 2) {
dev_warn(&port->dev, "short interrupt message received\n");
break;
}
- dev_dbg(&port->dev, "rx int, d1=%d, d2=%d\n", data[1], data[2]);
+ dev_dbg(&port->dev, "rx int, d1=%d\n", data[1]);
switch (data[1]) {
case 1: /* modemline change */
break;
case 2: /* tx unthrottle interrupt */
- priv->tx_throttled = 0;
- /* queue up a wakeup at scheduler time */
- schedule_work(&priv->wakeup_work);
+ spin_lock_irqsave(&port->lock, flags);
+ priv->tx_room = max(priv->tx_room, KEYSPAN_TX_THRESHOLD);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ keyspan_pda_write_start(port);
+
+ usb_serial_port_softint(port);
break;
default:
break;
@@ -201,31 +227,30 @@ exit:
__func__, retval);
}
-
static void keyspan_pda_rx_throttle(struct tty_struct *tty)
{
- /* stop receiving characters. We just turn off the URB request, and
- let chars pile up in the device. If we're doing hardware
- flowcontrol, the device will signal the other end when its buffer
- fills up. If we're doing XON/XOFF, this would be a good time to
- send an XOFF, although it might make sense to foist that off
- upon the device too. */
struct usb_serial_port *port = tty->driver_data;
+ /*
+ * Stop receiving characters. We just turn off the URB request, and
+ * let chars pile up in the device. If we're doing hardware
+ * flowcontrol, the device will signal the other end when its buffer
+ * fills up. If we're doing XON/XOFF, this would be a good time to
+ * send an XOFF, although it might make sense to foist that off upon
+ * the device too.
+ */
usb_kill_urb(port->interrupt_in_urb);
}
-
static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- /* just restart the receive interrupt URB */
+ /* just restart the receive interrupt URB */
if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
dev_dbg(&port->dev, "usb_submit_urb(read urb) failed\n");
}
-
static speed_t keyspan_pda_setbaud(struct usb_serial *serial, speed_t baud)
{
int rc;
@@ -267,8 +292,6 @@ static speed_t keyspan_pda_setbaud(struct usb_serial *serial, speed_t baud)
baud = 9600;
}
- /* rather than figure out how to sleep while waiting for this
- to complete, I just use the "legacy" API. */
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
0, /* set baud */
USB_TYPE_VENDOR
@@ -281,10 +304,10 @@ static speed_t keyspan_pda_setbaud(struct usb_serial *serial, speed_t baud)
2000); /* timeout */
if (rc < 0)
return 0;
+
return baud;
}
-
static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
@@ -296,6 +319,7 @@ static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
value = 1; /* start break */
else
value = 0; /* clear break */
+
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
4, /* set break */
USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
@@ -303,39 +327,35 @@ static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
if (result < 0)
dev_dbg(&port->dev, "%s - error %d from usb_control_msg\n",
__func__, result);
- /* there is something funky about this.. the TCSBRK that 'cu' performs
- ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4
- seconds apart, but it feels like the break sent isn't as long as it
- is on /dev/ttyS0 */
}
-
static void keyspan_pda_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
speed_t speed;
- /* cflag specifies lots of stuff: number of stop bits, parity, number
- of data bits, baud. What can the device actually handle?:
- CSTOPB (1 stop bit or 2)
- PARENB (parity)
- CSIZE (5bit .. 8bit)
- There is minimal hw support for parity (a PSW bit seems to hold the
- parity of whatever is in the accumulator). The UART either deals
- with 10 bits (start, 8 data, stop) or 11 bits (start, 8 data,
- 1 special, stop). So, with firmware changes, we could do:
- 8N1: 10 bit
- 8N2: 11 bit, extra bit always (mark?)
- 8[EOMS]1: 11 bit, extra bit is parity
- 7[EOMS]1: 10 bit, b0/b7 is parity
- 7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?)
-
- HW flow control is dictated by the tty->termios.c_cflags & CRTSCTS
- bit.
-
- For now, just do baud. */
-
+ /*
+ * cflag specifies lots of stuff: number of stop bits, parity, number
+ * of data bits, baud. What can the device actually handle?:
+ * CSTOPB (1 stop bit or 2)
+ * PARENB (parity)
+ * CSIZE (5bit .. 8bit)
+ * There is minimal hw support for parity (a PSW bit seems to hold the
+ * parity of whatever is in the accumulator). The UART either deals
+ * with 10 bits (start, 8 data, stop) or 11 bits (start, 8 data,
+ * 1 special, stop). So, with firmware changes, we could do:
+ * 8N1: 10 bit
+ * 8N2: 11 bit, extra bit always (mark?)
+ * 8[EOMS]1: 11 bit, extra bit is parity
+ * 7[EOMS]1: 10 bit, b0/b7 is parity
+ * 7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?)
+ *
+ * HW flow control is dictated by the tty->termios.c_cflags & CRTSCTS
+ * bit.
+ *
+ * For now, just do baud.
+ */
speed = tty_get_baud_rate(tty);
speed = keyspan_pda_setbaud(serial, speed);
@@ -344,17 +364,19 @@ static void keyspan_pda_set_termios(struct tty_struct *tty,
/* It hasn't changed so.. */
speed = tty_termios_baud_rate(old_termios);
}
- /* Only speed can change so copy the old h/w parameters
- then encode the new speed */
+ /*
+ * Only speed can change so copy the old h/w parameters then encode
+ * the new speed.
+ */
tty_termios_copy_hw(&tty->termios, old_termios);
tty_encode_baud_rate(tty, speed, speed);
}
-
-/* modem control pins: DTR and RTS are outputs and can be controlled.
- DCD, RI, DSR, CTS are inputs and can be read. All outputs can also be
- read. The byte passed is: DTR(b7) DCD RI DSR CTS RTS(b2) unused unused */
-
+/*
+ * Modem control pins: DTR and RTS are outputs and can be controlled.
+ * DCD, RI, DSR, CTS are inputs and can be read. All outputs can also be
+ * read. The byte passed is: DTR(b7) DCD RI DSR CTS RTS(b2) unused unused.
+ */
static int keyspan_pda_get_modem_info(struct usb_serial *serial,
unsigned char *value)
{
@@ -378,7 +400,6 @@ static int keyspan_pda_get_modem_info(struct usb_serial *serial,
return rc;
}
-
static int keyspan_pda_set_modem_info(struct usb_serial *serial,
unsigned char value)
{
@@ -401,13 +422,14 @@ static int keyspan_pda_tiocmget(struct tty_struct *tty)
rc = keyspan_pda_get_modem_info(serial, &status);
if (rc < 0)
return rc;
- value =
- ((status & (1<<7)) ? TIOCM_DTR : 0) |
- ((status & (1<<6)) ? TIOCM_CAR : 0) |
- ((status & (1<<5)) ? TIOCM_RNG : 0) |
- ((status & (1<<4)) ? TIOCM_DSR : 0) |
- ((status & (1<<3)) ? TIOCM_CTS : 0) |
- ((status & (1<<2)) ? TIOCM_RTS : 0);
+
+ value = ((status & BIT(7)) ? TIOCM_DTR : 0) |
+ ((status & BIT(6)) ? TIOCM_CAR : 0) |
+ ((status & BIT(5)) ? TIOCM_RNG : 0) |
+ ((status & BIT(4)) ? TIOCM_DSR : 0) |
+ ((status & BIT(3)) ? TIOCM_CTS : 0) |
+ ((status & BIT(2)) ? TIOCM_RTS : 0);
+
return value;
}
@@ -424,186 +446,127 @@ static int keyspan_pda_tiocmset(struct tty_struct *tty,
return rc;
if (set & TIOCM_RTS)
- status |= (1<<2);
+ status |= BIT(2);
if (set & TIOCM_DTR)
- status |= (1<<7);
+ status |= BIT(7);
if (clear & TIOCM_RTS)
- status &= ~(1<<2);
+ status &= ~BIT(2);
if (clear & TIOCM_DTR)
- status &= ~(1<<7);
+ status &= ~BIT(7);
rc = keyspan_pda_set_modem_info(serial, status);
return rc;
}
-static int keyspan_pda_write(struct tty_struct *tty,
- struct usb_serial_port *port, const unsigned char *buf, int count)
+static int keyspan_pda_write_start(struct usb_serial_port *port)
{
- struct usb_serial *serial = port->serial;
- int request_unthrottle = 0;
- int rc = 0;
- struct keyspan_pda_private *priv;
+ struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ struct urb *urb;
+ int count;
+ int room;
+ int rc;
- priv = usb_get_serial_port_data(port);
- /* guess how much room is left in the device's ring buffer, and if we
- want to send more than that, check first, updating our notion of
- what is left. If our write will result in no room left, ask the
- device to give us an interrupt when the room available rises above
- a threshold, and hold off all writers (eventually, those using
- select() or poll() too) until we receive that unthrottle interrupt.
- Block if we can't write anything at all, otherwise write as much as
- we can. */
- if (count == 0) {
- dev_dbg(&port->dev, "write request of 0 bytes\n");
- return 0;
- }
+ /*
+ * Guess how much room is left in the device's ring buffer. If our
+ * write will result in no room left, ask the device to give us an
+ * interrupt when the room available rises above a threshold but also
+ * query how much room is currently available (in case our guess was
+ * too conservative and the buffer is already empty when the
+ * unthrottle work is scheduled).
+ */
+
+ /*
+ * We might block because of:
+ * the TX urb is in-flight (wait until it completes)
+ * the device is full (wait until it says there is room)
+ */
+ spin_lock_irqsave(&port->lock, flags);
+
+ room = priv->tx_room;
+ count = kfifo_len(&port->write_fifo);
- /* we might block because of:
- the TX urb is in-flight (wait until it completes)
- the device is full (wait until it says there is room)
- */
- spin_lock_bh(&port->lock);
- if (!test_bit(0, &port->write_urbs_free) || priv->tx_throttled) {
- spin_unlock_bh(&port->lock);
+ if (!test_bit(0, &port->write_urbs_free) || count == 0 || room == 0) {
+ spin_unlock_irqrestore(&port->lock, flags);
return 0;
}
- clear_bit(0, &port->write_urbs_free);
- spin_unlock_bh(&port->lock);
-
- /* At this point the URB is in our control, nobody else can submit it
- again (the only sudden transition was the one from EINPROGRESS to
- finished). Also, the tx process is not throttled. So we are
- ready to write. */
-
- count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
-
- /* Check if we might overrun the Tx buffer. If so, ask the
- device how much room it really has. This is done only on
- scheduler time, since usb_control_msg() sleeps. */
- if (count > priv->tx_room && !in_interrupt()) {
- u8 *room;
-
- room = kmalloc(1, GFP_KERNEL);
- if (!room) {
- rc = -ENOMEM;
- goto exit;
- }
+ __clear_bit(0, &port->write_urbs_free);
- rc = usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 6, /* write_room */
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE
- | USB_DIR_IN,
- 0, /* value: 0 means "remaining room" */
- 0, /* index */
- room,
- 1,
- 2000);
- if (rc > 0) {
- dev_dbg(&port->dev, "roomquery says %d\n", *room);
- priv->tx_room = *room;
- }
- kfree(room);
- if (rc < 0) {
- dev_dbg(&port->dev, "roomquery failed\n");
- goto exit;
- }
- if (rc == 0) {
- dev_dbg(&port->dev, "roomquery returned 0 bytes\n");
- rc = -EIO; /* device didn't return any data */
- goto exit;
- }
- }
- if (count > priv->tx_room) {
- /* we're about to completely fill the Tx buffer, so
- we'll be throttled afterwards. */
- count = priv->tx_room;
- request_unthrottle = 1;
- }
+ if (count > room)
+ count = room;
+ if (count > port->bulk_out_size)
+ count = port->bulk_out_size;
- if (count) {
- /* now transfer data */
- memcpy(port->write_urb->transfer_buffer, buf, count);
- /* send the data out the bulk port */
- port->write_urb->transfer_buffer_length = count;
+ urb = port->write_urb;
+ count = kfifo_out(&port->write_fifo, urb->transfer_buffer, count);
+ urb->transfer_buffer_length = count;
- priv->tx_room -= count;
+ port->tx_bytes += count;
+ priv->tx_room -= count;
- rc = usb_submit_urb(port->write_urb, GFP_ATOMIC);
- if (rc) {
- dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed\n");
- goto exit;
- }
- } else {
- /* There wasn't any room left, so we are throttled until
- the buffer empties a bit */
- request_unthrottle = 1;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ dev_dbg(&port->dev, "%s - count = %d, txroom = %d\n", __func__, count, room);
+
+ rc = usb_submit_urb(urb, GFP_ATOMIC);
+ if (rc) {
+ dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed\n");
+
+ spin_lock_irqsave(&port->lock, flags);
+ port->tx_bytes -= count;
+ priv->tx_room = max(priv->tx_room, room + count);
+ __set_bit(0, &port->write_urbs_free);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return rc;
}
- if (request_unthrottle) {
- priv->tx_throttled = 1; /* block writers */
+ if (count == room)
schedule_work(&priv->unthrottle_work);
- }
- rc = count;
-exit:
- if (rc < 0)
- set_bit(0, &port->write_urbs_free);
- return rc;
+ return count;
}
-
static void keyspan_pda_write_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
- struct keyspan_pda_private *priv;
+ unsigned long flags;
- set_bit(0, &port->write_urbs_free);
- priv = usb_get_serial_port_data(port);
+ spin_lock_irqsave(&port->lock, flags);
+ port->tx_bytes -= urb->transfer_buffer_length;
+ __set_bit(0, &port->write_urbs_free);
+ spin_unlock_irqrestore(&port->lock, flags);
- /* queue up a wakeup at scheduler time */
- schedule_work(&priv->wakeup_work);
-}
+ keyspan_pda_write_start(port);
+ usb_serial_port_softint(port);
+}
-static int keyspan_pda_write_room(struct tty_struct *tty)
+static int keyspan_pda_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count)
{
- struct usb_serial_port *port = tty->driver_data;
- struct keyspan_pda_private *priv;
- priv = usb_get_serial_port_data(port);
- /* used by n_tty.c for processing of tabs and such. Giving it our
- conservative guess is probably good enough, but needs testing by
- running a console through the device. */
- return priv->tx_room;
-}
+ int rc;
+ dev_dbg(&port->dev, "%s - count = %d\n", __func__, count);
-static int keyspan_pda_chars_in_buffer(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct keyspan_pda_private *priv;
- unsigned long flags;
- int ret = 0;
+ if (!count)
+ return 0;
- priv = usb_get_serial_port_data(port);
+ count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
- /* when throttled, return at least WAKEUP_CHARS to tell select() (via
- n_tty.c:normal_poll() ) that we're not writeable. */
+ rc = keyspan_pda_write_start(port);
+ if (rc)
+ return rc;
- spin_lock_irqsave(&port->lock, flags);
- if (!test_bit(0, &port->write_urbs_free) || priv->tx_throttled)
- ret = 256;
- spin_unlock_irqrestore(&port->lock, flags);
- return ret;
+ return count;
}
-
static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
{
struct usb_serial *serial = port->serial;
if (on)
- keyspan_pda_set_modem_info(serial, (1 << 7) | (1 << 2));
+ keyspan_pda_set_modem_info(serial, BIT(7) | BIT(2));
else
keyspan_pda_set_modem_info(serial, 0);
}
@@ -612,74 +575,63 @@ static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
static int keyspan_pda_open(struct tty_struct *tty,
struct usb_serial_port *port)
{
- struct usb_serial *serial = port->serial;
- u8 *room;
- int rc = 0;
- struct keyspan_pda_private *priv;
+ struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
+ int rc;
/* find out how much room is in the Tx ring */
- room = kmalloc(1, GFP_KERNEL);
- if (!room)
- return -ENOMEM;
+ rc = keyspan_pda_get_write_room(priv);
+ if (rc < 0)
+ return rc;
- rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- 6, /* write_room */
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE
- | USB_DIR_IN,
- 0, /* value */
- 0, /* index */
- room,
- 1,
- 2000);
- if (rc < 0) {
- dev_dbg(&port->dev, "%s - roomquery failed\n", __func__);
- goto error;
- }
- if (rc == 0) {
- dev_dbg(&port->dev, "%s - roomquery returned 0 bytes\n", __func__);
- rc = -EIO;
- goto error;
- }
- priv = usb_get_serial_port_data(port);
- priv->tx_room = *room;
- priv->tx_throttled = *room ? 0 : 1;
+ spin_lock_irq(&port->lock);
+ priv->tx_room = rc;
+ spin_unlock_irq(&port->lock);
- /*Start reading from the device*/
rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (rc) {
dev_dbg(&port->dev, "%s - usb_submit_urb(read int) failed\n", __func__);
- goto error;
+ return rc;
}
-error:
- kfree(room);
- return rc;
+
+ return 0;
}
+
static void keyspan_pda_close(struct usb_serial_port *port)
{
- usb_kill_urb(port->write_urb);
+ struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
+
+ /*
+ * Stop the interrupt URB first as its completion handler may submit
+ * the write URB.
+ */
usb_kill_urb(port->interrupt_in_urb);
-}
+ usb_kill_urb(port->write_urb);
+
+ cancel_work_sync(&priv->unthrottle_work);
+ spin_lock_irq(&port->lock);
+ kfifo_reset(&port->write_fifo);
+ spin_unlock_irq(&port->lock);
+}
/* download the firmware to a "fake" device (pre-renumeration) */
static int keyspan_pda_fake_startup(struct usb_serial *serial)
{
+ unsigned int vid = le16_to_cpu(serial->dev->descriptor.idVendor);
const char *fw_name;
/* download the firmware here ... */
ezusb_fx1_set_reset(serial->dev, 1);
- if (0) { ; }
-#ifdef KEYSPAN
- else if (le16_to_cpu(serial->dev->descriptor.idVendor) == KEYSPAN_VENDOR_ID)
+ switch (vid) {
+ case KEYSPAN_VENDOR_ID:
fw_name = "keyspan_pda/keyspan_pda.fw";
-#endif
-#ifdef XIRCOM
- else if ((le16_to_cpu(serial->dev->descriptor.idVendor) == XIRCOM_VENDOR_ID) ||
- (le16_to_cpu(serial->dev->descriptor.idVendor) == ENTREGA_VENDOR_ID))
+ break;
+ case XIRCOM_VENDOR_ID:
+ case ENTREGA_VENDOR_ID:
fw_name = "keyspan_pda/xircom_pgs.fw";
-#endif
- else {
+ break;
+ default:
dev_err(&serial->dev->dev, "%s: unknown vendor, aborting.\n",
__func__);
return -ENODEV;
@@ -691,19 +643,17 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial)
return -ENOENT;
}
- /* after downloading firmware Renumeration will occur in a
- moment and the new device will bind to the real driver */
+ /*
+ * After downloading firmware renumeration will occur in a moment and
+ * the new device will bind to the real driver.
+ */
- /* we want this device to fail to have a driver assigned to it. */
+ /* We want this device to fail to have a driver assigned to it. */
return 1;
}
-#ifdef KEYSPAN
MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
-#endif
-#ifdef XIRCOM
MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
-#endif
static int keyspan_pda_port_probe(struct usb_serial_port *port)
{
@@ -714,9 +664,7 @@ static int keyspan_pda_port_probe(struct usb_serial_port *port)
if (!priv)
return -ENOMEM;
- INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write);
INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
- priv->serial = port->serial;
priv->port = port;
usb_set_serial_port_data(port, priv);
@@ -734,7 +682,6 @@ static int keyspan_pda_port_remove(struct usb_serial_port *port)
return 0;
}
-#ifdef KEYSPAN
static struct usb_serial_driver keyspan_pda_fake_device = {
.driver = {
.owner = THIS_MODULE,
@@ -745,20 +692,6 @@ static struct usb_serial_driver keyspan_pda_fake_device = {
.num_ports = 1,
.attach = keyspan_pda_fake_startup,
};
-#endif
-
-#ifdef XIRCOM
-static struct usb_serial_driver xircom_pgs_fake_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "xircom_no_firm",
- },
- .description = "Xircom / Entrega PGS - (prerenumeration)",
- .id_table = id_table_fake_xircom,
- .num_ports = 1,
- .attach = keyspan_pda_fake_startup,
-};
-#endif
static struct usb_serial_driver keyspan_pda_device = {
.driver = {
@@ -774,10 +707,8 @@ static struct usb_serial_driver keyspan_pda_device = {
.open = keyspan_pda_open,
.close = keyspan_pda_close,
.write = keyspan_pda_write,
- .write_room = keyspan_pda_write_room,
- .write_bulk_callback = keyspan_pda_write_bulk_callback,
+ .write_bulk_callback = keyspan_pda_write_bulk_callback,
.read_int_callback = keyspan_pda_rx_interrupt,
- .chars_in_buffer = keyspan_pda_chars_in_buffer,
.throttle = keyspan_pda_rx_throttle,
.unthrottle = keyspan_pda_rx_unthrottle,
.set_termios = keyspan_pda_set_termios,
@@ -790,12 +721,7 @@ static struct usb_serial_driver keyspan_pda_device = {
static struct usb_serial_driver * const serial_drivers[] = {
&keyspan_pda_device,
-#ifdef KEYSPAN
&keyspan_pda_fake_device,
-#endif
-#ifdef XIRCOM
- &xircom_pgs_fake_device,
-#endif
NULL
};
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 5eed1078fac8..41ee2984a0df 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -79,14 +79,6 @@ MODULE_DEVICE_TABLE(usb, id_table);
#define DCR_INIT_VAL 0x0c /* SLCTIN, nINIT */
#define ECR_INIT_VAL 0x00 /* SPP mode */
-struct urbtracker {
- struct mos7715_parport *mos_parport;
- struct list_head urblist_entry;
- struct kref ref_count;
- struct urb *urb;
- struct usb_ctrlrequest *setup;
-};
-
enum mos7715_pp_modes {
SPP = 0<<5,
PS2 = 1<<5, /* moschip calls this 'NIBBLE' mode */
@@ -96,12 +88,9 @@ enum mos7715_pp_modes {
struct mos7715_parport {
struct parport *pp; /* back to containing struct */
struct kref ref_count; /* to instance of this struct */
- struct list_head deferred_urbs; /* list deferred async urbs */
- struct list_head active_urbs; /* list async urbs in flight */
- spinlock_t listlock; /* protects list access */
bool msg_pending; /* usb sync call pending */
struct completion syncmsg_compl; /* usb sync call completed */
- struct tasklet_struct urb_tasklet; /* for sending deferred urbs */
+ struct work_struct work; /* restore deferred writes */
struct usb_serial *serial; /* back to containing struct */
__u8 shadowECR; /* parallel port regs... */
__u8 shadowDCR;
@@ -265,174 +254,8 @@ static void destroy_mos_parport(struct kref *kref)
kfree(mos_parport);
}
-static void destroy_urbtracker(struct kref *kref)
-{
- struct urbtracker *urbtrack =
- container_of(kref, struct urbtracker, ref_count);
- struct mos7715_parport *mos_parport = urbtrack->mos_parport;
-
- usb_free_urb(urbtrack->urb);
- kfree(urbtrack->setup);
- kfree(urbtrack);
- kref_put(&mos_parport->ref_count, destroy_mos_parport);
-}
-
/*
- * This runs as a tasklet when sending an urb in a non-blocking parallel
- * port callback had to be deferred because the disconnect mutex could not be
- * obtained at the time.
- */
-static void send_deferred_urbs(struct tasklet_struct *t)
-{
- int ret_val;
- unsigned long flags;
- struct mos7715_parport *mos_parport = from_tasklet(mos_parport, t,
- urb_tasklet);
- struct urbtracker *urbtrack, *tmp;
- struct list_head *cursor, *next;
- struct device *dev;
-
- /* if release function ran, game over */
- if (unlikely(mos_parport->serial == NULL))
- return;
-
- dev = &mos_parport->serial->dev->dev;
-
- /* try again to get the mutex */
- if (!mutex_trylock(&mos_parport->serial->disc_mutex)) {
- dev_dbg(dev, "%s: rescheduling tasklet\n", __func__);
- tasklet_schedule(&mos_parport->urb_tasklet);
- return;
- }
-
- /* if device disconnected, game over */
- if (unlikely(mos_parport->serial->disconnected)) {
- mutex_unlock(&mos_parport->serial->disc_mutex);
- return;
- }
-
- spin_lock_irqsave(&mos_parport->listlock, flags);
- if (list_empty(&mos_parport->deferred_urbs)) {
- spin_unlock_irqrestore(&mos_parport->listlock, flags);
- mutex_unlock(&mos_parport->serial->disc_mutex);
- dev_dbg(dev, "%s: deferred_urbs list empty\n", __func__);
- return;
- }
-
- /* move contents of deferred_urbs list to active_urbs list and submit */
- list_for_each_safe(cursor, next, &mos_parport->deferred_urbs)
- list_move_tail(cursor, &mos_parport->active_urbs);
- list_for_each_entry_safe(urbtrack, tmp, &mos_parport->active_urbs,
- urblist_entry) {
- ret_val = usb_submit_urb(urbtrack->urb, GFP_ATOMIC);
- dev_dbg(dev, "%s: urb submitted\n", __func__);
- if (ret_val) {
- dev_err(dev, "usb_submit_urb() failed: %d\n", ret_val);
- list_del(&urbtrack->urblist_entry);
- kref_put(&urbtrack->ref_count, destroy_urbtracker);
- }
- }
- spin_unlock_irqrestore(&mos_parport->listlock, flags);
- mutex_unlock(&mos_parport->serial->disc_mutex);
-}
-
-/* callback for parallel port control urbs submitted asynchronously */
-static void async_complete(struct urb *urb)
-{
- struct urbtracker *urbtrack = urb->context;
- int status = urb->status;
- unsigned long flags;
-
- if (unlikely(status))
- dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status);
-
- /* remove the urbtracker from the active_urbs list */
- spin_lock_irqsave(&urbtrack->mos_parport->listlock, flags);
- list_del(&urbtrack->urblist_entry);
- spin_unlock_irqrestore(&urbtrack->mos_parport->listlock, flags);
- kref_put(&urbtrack->ref_count, destroy_urbtracker);
-}
-
-static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
- enum mos_regs reg, __u8 data)
-{
- struct urbtracker *urbtrack;
- int ret_val;
- unsigned long flags;
- struct usb_serial *serial = mos_parport->serial;
- struct usb_device *usbdev = serial->dev;
-
- /* create and initialize the control urb and containing urbtracker */
- urbtrack = kmalloc(sizeof(struct urbtracker), GFP_ATOMIC);
- if (!urbtrack)
- return -ENOMEM;
-
- urbtrack->urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!urbtrack->urb) {
- kfree(urbtrack);
- return -ENOMEM;
- }
- urbtrack->setup = kmalloc(sizeof(*urbtrack->setup), GFP_ATOMIC);
- if (!urbtrack->setup) {
- usb_free_urb(urbtrack->urb);
- kfree(urbtrack);
- return -ENOMEM;
- }
- urbtrack->setup->bRequestType = (__u8)0x40;
- urbtrack->setup->bRequest = (__u8)0x0e;
- urbtrack->setup->wValue = cpu_to_le16(get_reg_value(reg, dummy));
- urbtrack->setup->wIndex = cpu_to_le16(get_reg_index(reg));
- urbtrack->setup->wLength = 0;
- usb_fill_control_urb(urbtrack->urb, usbdev,
- usb_sndctrlpipe(usbdev, 0),
- (unsigned char *)urbtrack->setup,
- NULL, 0, async_complete, urbtrack);
- kref_get(&mos_parport->ref_count);
- urbtrack->mos_parport = mos_parport;
- kref_init(&urbtrack->ref_count);
- INIT_LIST_HEAD(&urbtrack->urblist_entry);
-
- /*
- * get the disconnect mutex, or add tracker to the deferred_urbs list
- * and schedule a tasklet to try again later
- */
- if (!mutex_trylock(&serial->disc_mutex)) {
- spin_lock_irqsave(&mos_parport->listlock, flags);
- list_add_tail(&urbtrack->urblist_entry,
- &mos_parport->deferred_urbs);
- spin_unlock_irqrestore(&mos_parport->listlock, flags);
- tasklet_schedule(&mos_parport->urb_tasklet);
- dev_dbg(&usbdev->dev, "tasklet scheduled\n");
- return 0;
- }
-
- /* bail if device disconnected */
- if (serial->disconnected) {
- kref_put(&urbtrack->ref_count, destroy_urbtracker);
- mutex_unlock(&serial->disc_mutex);
- return -ENODEV;
- }
-
- /* add the tracker to the active_urbs list and submit */
- spin_lock_irqsave(&mos_parport->listlock, flags);
- list_add_tail(&urbtrack->urblist_entry, &mos_parport->active_urbs);
- spin_unlock_irqrestore(&mos_parport->listlock, flags);
- ret_val = usb_submit_urb(urbtrack->urb, GFP_ATOMIC);
- mutex_unlock(&serial->disc_mutex);
- if (ret_val) {
- dev_err(&usbdev->dev,
- "%s: submit_urb() failed: %d\n", __func__, ret_val);
- spin_lock_irqsave(&mos_parport->listlock, flags);
- list_del(&urbtrack->urblist_entry);
- spin_unlock_irqrestore(&mos_parport->listlock, flags);
- kref_put(&urbtrack->ref_count, destroy_urbtracker);
- return ret_val;
- }
- return 0;
-}
-
-/*
- * This is the the common top part of all parallel port callback operations that
+ * This is the common top part of all parallel port callback operations that
* send synchronous messages to the device. This implements convoluted locking
* that avoids two scenarios: (1) a port operation is called after usbserial
* has called our release function, at which point struct mos7715_parport has
@@ -458,6 +281,10 @@ static int parport_prologue(struct parport *pp)
reinit_completion(&mos_parport->syncmsg_compl);
spin_unlock(&release_lock);
+ /* ensure writes from restore are submitted before new requests */
+ if (work_pending(&mos_parport->work))
+ flush_work(&mos_parport->work);
+
mutex_lock(&mos_parport->serial->disc_mutex);
if (mos_parport->serial->disconnected) {
/* device disconnected */
@@ -482,6 +309,26 @@ static inline void parport_epilogue(struct parport *pp)
complete(&mos_parport->syncmsg_compl);
}
+static void deferred_restore_writes(struct work_struct *work)
+{
+ struct mos7715_parport *mos_parport;
+
+ mos_parport = container_of(work, struct mos7715_parport, work);
+
+ mutex_lock(&mos_parport->serial->disc_mutex);
+
+ /* if device disconnected, game over */
+ if (mos_parport->serial->disconnected)
+ goto done;
+
+ write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
+ mos_parport->shadowDCR);
+ write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR,
+ mos_parport->shadowECR);
+done:
+ mutex_unlock(&mos_parport->serial->disc_mutex);
+}
+
static void parport_mos7715_write_data(struct parport *pp, unsigned char d)
{
struct mos7715_parport *mos_parport = pp->private_data;
@@ -639,10 +486,10 @@ static void parport_mos7715_restore_state(struct parport *pp,
spin_unlock(&release_lock);
return;
}
- write_parport_reg_nonblock(mos_parport, MOS7720_DCR,
- mos_parport->shadowDCR);
- write_parport_reg_nonblock(mos_parport, MOS7720_ECR,
- mos_parport->shadowECR);
+ mos_parport->shadowDCR = s->u.pc.ctr;
+ mos_parport->shadowECR = s->u.pc.ecr;
+
+ schedule_work(&mos_parport->work);
spin_unlock(&release_lock);
}
@@ -712,12 +559,9 @@ static int mos7715_parport_init(struct usb_serial *serial)
mos_parport->msg_pending = false;
kref_init(&mos_parport->ref_count);
- spin_lock_init(&mos_parport->listlock);
- INIT_LIST_HEAD(&mos_parport->active_urbs);
- INIT_LIST_HEAD(&mos_parport->deferred_urbs);
usb_set_serial_data(serial, mos_parport); /* hijack private pointer */
mos_parport->serial = serial;
- tasklet_setup(&mos_parport->urb_tasklet, send_deferred_urbs);
+ INIT_WORK(&mos_parport->work, deferred_restore_writes);
init_completion(&mos_parport->syncmsg_compl);
/* cycle parallel port reset bit */
@@ -1867,8 +1711,6 @@ static void mos7720_release(struct usb_serial *serial)
if (le16_to_cpu(serial->dev->descriptor.idProduct)
== MOSCHIP_DEVICE_ID_7715) {
- struct urbtracker *urbtrack;
- unsigned long flags;
struct mos7715_parport *mos_parport =
usb_get_serial_data(serial);
@@ -1881,21 +1723,17 @@ static void mos7720_release(struct usb_serial *serial)
if (mos_parport->msg_pending)
wait_for_completion_timeout(&mos_parport->syncmsg_compl,
msecs_to_jiffies(MOS_WDR_TIMEOUT));
+ /*
+ * If delayed work is currently scheduled, wait for it to
+ * complete. This also implies barriers that ensure the
+ * below serial clearing is not hoisted above the ->work.
+ */
+ cancel_work_sync(&mos_parport->work);
parport_remove_port(mos_parport->pp);
usb_set_serial_data(serial, NULL);
mos_parport->serial = NULL;
- /* if tasklet currently scheduled, wait for it to complete */
- tasklet_kill(&mos_parport->urb_tasklet);
-
- /* unlink any urbs sent by the tasklet */
- spin_lock_irqsave(&mos_parport->listlock, flags);
- list_for_each_entry(urbtrack,
- &mos_parport->active_urbs,
- urblist_entry)
- usb_unlink_urb(urbtrack->urb);
- spin_unlock_irqrestore(&mos_parport->listlock, flags);
parport_del_port(mos_parport->pp);
kref_put(&mos_parport->ref_count, destroy_mos_parport);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 56d6f6d83bd7..2c21e34235bb 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -563,6 +563,9 @@ static void option_instat_callback(struct urb *urb);
/* Device flags */
+/* Highest interface number which can be used with NCTRL() and RSVD() */
+#define FLAG_IFNUM_MAX 7
+
/* Interface does not support modem-control requests */
#define NCTRL(ifnum) ((BIT(ifnum) & 0xff) << 8)
@@ -2101,6 +2104,14 @@ static struct usb_serial_driver * const serial_drivers[] = {
module_usb_serial_driver(serial_drivers, option_ids);
+static bool iface_is_reserved(unsigned long device_flags, u8 ifnum)
+{
+ if (ifnum > FLAG_IFNUM_MAX)
+ return false;
+
+ return device_flags & RSVD(ifnum);
+}
+
static int option_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
@@ -2117,7 +2128,7 @@ static int option_probe(struct usb_serial *serial,
* the same class/subclass/protocol as the serial interfaces. Look at
* the Windows driver .INF files for reserved interface numbers.
*/
- if (device_flags & RSVD(iface_desc->bInterfaceNumber))
+ if (iface_is_reserved(device_flags, iface_desc->bInterfaceNumber))
return -ENODEV;
/*
@@ -2133,6 +2144,14 @@ static int option_probe(struct usb_serial *serial,
return 0;
}
+static bool iface_no_modem_control(unsigned long device_flags, u8 ifnum)
+{
+ if (ifnum > FLAG_IFNUM_MAX)
+ return false;
+
+ return device_flags & NCTRL(ifnum);
+}
+
static int option_attach(struct usb_serial *serial)
{
struct usb_interface_descriptor *iface_desc;
@@ -2148,7 +2167,7 @@ static int option_attach(struct usb_serial *serial)
iface_desc = &serial->interface->cur_altsetting->desc;
- if (!(device_flags & NCTRL(iface_desc->bInterfaceNumber)))
+ if (!iface_no_modem_control(device_flags, iface_desc->bInterfaceNumber))
data->use_send_setup = 1;
if (device_flags & ZLP)
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 8e67eff9039f..1c09b922f8b0 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -62,7 +62,6 @@
* @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
* port.
* @flags: usb serial port flags
- * @write_wait: a wait_queue_head_t used by the port.
* @work: work queue entry for the line discipline waking up.
* @dev: pointer to the serial device
*
@@ -108,7 +107,6 @@ struct usb_serial_port {
int tx_bytes;
unsigned long flags;
- wait_queue_head_t write_wait;
struct work_struct work;
unsigned long sysrq; /* sysrq timeout */
struct device dev;