summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2022-10-08 08:56:37 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2022-10-08 08:56:37 -0700
commita09476668e3016ea4a7b0a7ebd02f44e0546c12c (patch)
tree0a2e435d40b1785bc3df0c455fbf858adc28d36c
parente8bc52cb8df80c31c73c726ab58ea9746e9ff734 (diff)
parent7cd04013fbf3e6dcb67ca6b59aa813269a2ad9ce (diff)
Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...
-rw-r--r--Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x8
-rw-r--r--Documentation/ABI/testing/sysfs-bus-counter35
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio126
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-bno05581
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-cdc-ad774611
-rw-r--r--Documentation/ABI/testing/sysfs-devices-hisi_ptt61
-rw-r--r--Documentation/ABI/testing/sysfs-driver-habanalabs12
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml6
-rw-r--r--Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml3
-rw-r--r--Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml3
-rw-r--r--Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml61
-rw-r--r--Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml7
-rw-r--r--Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml39
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml17
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml5
-rw-r--r--Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml53
-rw-r--r--Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml5
-rw-r--r--Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml6
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml8
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml12
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml8
-rw-r--r--Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml8
-rw-r--r--Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml5
-rw-r--r--Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml26
-rw-r--r--Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml69
-rw-r--r--Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml6
-rw-r--r--Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml12
-rw-r--r--Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml56
-rw-r--r--Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml2
-rw-r--r--Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml3
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml6
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml11
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml8
-rw-r--r--Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml4
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml11
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml1
-rw-r--r--Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/frequency/adf4371.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml59
-rw-r--r--Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml6
-rw-r--r--Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml5
-rw-r--r--Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml7
-rw-r--r--Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml12
-rw-r--r--Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml49
-rw-r--r--Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml2
-rw-r--r--Documentation/devicetree/bindings/iio/pressure/bmp085.yaml4
-rw-r--r--Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml9
-rw-r--r--Documentation/devicetree/bindings/iio/st,st-sensors.yaml2
-rw-r--r--Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml4
-rw-r--r--Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml6
-rw-r--r--Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml6
-rw-r--r--Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml4
-rw-r--r--Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml1
-rw-r--r--Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml45
-rw-r--r--Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml3
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml2
-rw-r--r--Documentation/iio/bno055.rst51
-rw-r--r--Documentation/iio/index.rst2
-rw-r--r--Documentation/trace/coresight/coresight-cpu-debug.rst3
-rw-r--r--Documentation/trace/coresight/coresight-etm4x-reference.rst14
-rw-r--r--Documentation/trace/hisi-ptt.rst298
-rw-r--r--Documentation/trace/index.rst1
-rw-r--r--MAINTAINERS97
-rw-r--r--arch/arm/configs/multi_v7_defconfig6
-rw-r--r--arch/arm/configs/qcom_defconfig2
-rw-r--r--arch/arm64/configs/defconfig10
-rw-r--r--arch/arm64/include/asm/sysreg.h1
-rw-r--r--arch/mips/configs/ci20_defconfig2
-rw-r--r--drivers/Makefile1
-rw-r--r--drivers/accessibility/speakup/speakup_dummy.c4
-rw-r--r--drivers/accessibility/speakup/speakup_soft.c32
-rw-r--r--drivers/accessibility/speakup/spk_types.h2
-rw-r--r--drivers/accessibility/speakup/varhandlers.c12
-rw-r--r--drivers/android/binder_alloc.c55
-rw-r--r--drivers/android/binder_alloc.h12
-rw-r--r--drivers/android/binderfs.c31
-rw-r--r--drivers/bus/mhi/host/pci_generic.c2
-rw-r--r--drivers/bus/mvebu-mbus.c26
-rw-r--r--drivers/comedi/comedi_fops.c8
-rw-r--r--drivers/counter/104-quad-8.c36
-rw-r--r--drivers/counter/Kconfig15
-rw-r--r--drivers/counter/Makefile1
-rw-r--r--drivers/counter/counter-chrdev.c137
-rw-r--r--drivers/counter/counter-core.c14
-rw-r--r--drivers/counter/counter-sysfs.c304
-rw-r--r--drivers/counter/ftm-quaddec.c1
-rw-r--r--drivers/counter/intel-qep.c1
-rw-r--r--drivers/counter/interrupt-cnt.c12
-rw-r--r--drivers/counter/microchip-tcb-capture.c1
-rw-r--r--drivers/counter/stm32-lptimer-cnt.c1
-rw-r--r--drivers/counter/stm32-timer-cnt.c1
-rw-r--r--drivers/counter/ti-ecap-capture.c614
-rw-r--r--drivers/counter/ti-eqep.c1
-rw-r--r--drivers/cpufreq/Kconfig.arm2
-rw-r--r--drivers/extcon/Kconfig2
-rw-r--r--drivers/extcon/extcon-usbc-tusb320.c232
-rw-r--r--drivers/firmware/google/gsmi.c9
-rw-r--r--drivers/fpga/dfl-pci.c18
-rw-r--r--drivers/fpga/dfl.c2
-rw-r--r--drivers/fpga/intel-m10-bmc-sec-update.c3
-rw-r--r--drivers/fpga/microchip-spi.c1
-rw-r--r--drivers/fsi/fsi-core.c11
-rw-r--r--drivers/fsi/fsi-master-ast-cf.c2
-rw-r--r--drivers/fsi/fsi-master.h2
-rw-r--r--drivers/fsi/fsi-occ.c66
-rw-r--r--drivers/fsi/fsi-sbefifo.c15
-rw-r--r--drivers/gnss/core.c4
-rw-r--r--drivers/hwmon/occ/common.c11
-rw-r--r--drivers/hwmon/occ/p9_sbe.c26
-rw-r--r--drivers/hwtracing/Kconfig2
-rw-r--r--drivers/hwtracing/coresight/Kconfig4
-rw-r--r--drivers/hwtracing/coresight/coresight-catu.c27
-rw-r--r--drivers/hwtracing/coresight/coresight-catu.h8
-rw-r--r--drivers/hwtracing/coresight/coresight-core.c28
-rw-r--r--drivers/hwtracing/coresight/coresight-cti-sysfs.c213
-rw-r--r--drivers/hwtracing/coresight/coresight-etb10.c28
-rw-r--r--drivers/hwtracing/coresight/coresight-etm3x-sysfs.c34
-rw-r--r--drivers/hwtracing/coresight/coresight-etm4x-sysfs.c29
-rw-r--r--drivers/hwtracing/coresight/coresight-priv.h74
-rw-r--r--drivers/hwtracing/coresight/coresight-replicator.c10
-rw-r--r--drivers/hwtracing/coresight/coresight-stm.c40
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc-core.c48
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc.h4
-rw-r--r--drivers/hwtracing/ptt/Kconfig12
-rw-r--r--drivers/hwtracing/ptt/Makefile2
-rw-r--r--drivers/hwtracing/ptt/hisi_ptt.c1046
-rw-r--r--drivers/hwtracing/ptt/hisi_ptt.h200
-rw-r--r--drivers/iio/accel/Kconfig13
-rw-r--r--drivers/iio/accel/Makefile2
-rw-r--r--drivers/iio/accel/adxl313.h35
-rw-r--r--drivers/iio/accel/adxl313_core.c202
-rw-r--r--drivers/iio/accel/adxl313_i2c.c74
-rw-r--r--drivers/iio/accel/adxl313_spi.c63
-rw-r--r--drivers/iio/accel/adxl345_core.c7
-rw-r--r--drivers/iio/accel/bma400.h14
-rw-r--r--drivers/iio/accel/bma400_core.c346
-rw-r--r--drivers/iio/accel/bmi088-accel-core.c15
-rw-r--r--drivers/iio/accel/bmi088-accel-spi.c2
-rw-r--r--drivers/iio/accel/kxcjk-1013.c2
-rw-r--r--drivers/iio/accel/msa311.c1321
-rw-r--r--drivers/iio/adc/Kconfig47
-rw-r--r--drivers/iio/adc/Makefile3
-rw-r--r--drivers/iio/adc/ab8500-gpadc.c27
-rw-r--r--drivers/iio/adc/ad7124.c15
-rw-r--r--drivers/iio/adc/ad7768-1.c17
-rw-r--r--drivers/iio/adc/ad7923.c11
-rw-r--r--drivers/iio/adc/ad9467.c17
-rw-r--r--drivers/iio/adc/at91-sama5d2_adc.c714
-rw-r--r--drivers/iio/adc/imx8qxp-adc.c8
-rw-r--r--drivers/iio/adc/ingenic-adc.c23
-rw-r--r--drivers/iio/adc/lpc18xx_adc.c18
-rw-r--r--drivers/iio/adc/ltc2496.c9
-rw-r--r--drivers/iio/adc/ltc2497-core.c12
-rw-r--r--drivers/iio/adc/ltc2497.c77
-rw-r--r--drivers/iio/adc/ltc2497.h6
-rw-r--r--drivers/iio/adc/max11205.c183
-rw-r--r--drivers/iio/adc/max1363.c6
-rw-r--r--drivers/iio/adc/mcp3911.c257
-rw-r--r--drivers/iio/adc/mt6360-adc.c2
-rw-r--r--drivers/iio/adc/qcom-pm8xxx-xoadc.c58
-rw-r--r--drivers/iio/adc/qcom-spmi-adc5.c73
-rw-r--r--drivers/iio/adc/qcom-spmi-vadc.c44
-rw-r--r--drivers/iio/adc/rtq6056.c661
-rw-r--r--drivers/iio/adc/stm32-adc-core.c59
-rw-r--r--drivers/iio/adc/stm32-adc-core.h31
-rw-r--r--drivers/iio/adc/stm32-adc.c128
-rw-r--r--drivers/iio/adc/ti-ads131e08.c19
-rw-r--r--drivers/iio/adc/ti-tsc2046.c69
-rw-r--r--drivers/iio/adc/xilinx-ams.c15
-rw-r--r--drivers/iio/adc/xilinx-xadc-core.c18
-rw-r--r--drivers/iio/addac/Kconfig16
-rw-r--r--drivers/iio/addac/Makefile1
-rw-r--r--drivers/iio/addac/stx104.c (renamed from drivers/iio/adc/stx104.c)0
-rw-r--r--drivers/iio/cdc/Kconfig10
-rw-r--r--drivers/iio/cdc/Makefile1
-rw-r--r--drivers/iio/cdc/ad7746.c (renamed from drivers/staging/iio/cdc/ad7746.c)441
-rw-r--r--drivers/iio/common/scmi_sensors/scmi_iio.c8
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_core.c2
-rw-r--r--drivers/iio/dac/ad5593r.c50
-rw-r--r--drivers/iio/frequency/adf4371.c17
-rw-r--r--drivers/iio/frequency/admv1014.c3
-rw-r--r--drivers/iio/frequency/adrf6780.c16
-rw-r--r--drivers/iio/imu/Kconfig1
-rw-r--r--drivers/iio/imu/Makefile1
-rw-r--r--drivers/iio/imu/adis16475.c15
-rw-r--r--drivers/iio/imu/bno055/Kconfig25
-rw-r--r--drivers/iio/imu/bno055/Makefile10
-rw-r--r--drivers/iio/imu/bno055/bno055.c1685
-rw-r--r--drivers/iio/imu/bno055/bno055.h13
-rw-r--r--drivers/iio/imu/bno055/bno055_i2c.c57
-rw-r--r--drivers/iio/imu/bno055/bno055_ser_core.c560
-rw-r--r--drivers/iio/imu/bno055/bno055_ser_trace.c14
-rw-r--r--drivers/iio/imu/bno055/bno055_ser_trace.h104
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c4
-rw-r--r--drivers/iio/imu/st_lsm6dsx/Kconfig2
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h2
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c2
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c7
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c5
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c5
-rw-r--r--drivers/iio/industrialio-buffer.c5
-rw-r--r--drivers/iio/industrialio-core.c29
-rw-r--r--drivers/iio/industrialio-event.c14
-rw-r--r--drivers/iio/industrialio-trigger.c1
-rw-r--r--drivers/iio/inkern.c272
-rw-r--r--drivers/iio/light/Kconfig11
-rw-r--r--drivers/iio/light/Makefile1
-rw-r--r--drivers/iio/light/ltrf216a.c550
-rw-r--r--drivers/iio/light/st_uvis25_core.c9
-rw-r--r--drivers/iio/light/st_uvis25_i2c.c2
-rw-r--r--drivers/iio/light/st_uvis25_spi.c2
-rw-r--r--drivers/iio/magnetometer/Kconfig4
-rw-r--r--drivers/iio/magnetometer/hmc5843.h13
-rw-r--r--drivers/iio/magnetometer/hmc5843_core.c8
-rw-r--r--drivers/iio/magnetometer/hmc5843_i2c.c2
-rw-r--r--drivers/iio/magnetometer/hmc5843_spi.c14
-rw-r--r--drivers/iio/magnetometer/yamaha-yas530.c855
-rw-r--r--drivers/iio/pressure/Kconfig6
-rw-r--r--drivers/iio/pressure/bmp280-core.c974
-rw-r--r--drivers/iio/pressure/bmp280-i2c.c15
-rw-r--r--drivers/iio/pressure/bmp280-regmap.c55
-rw-r--r--drivers/iio/pressure/bmp280-spi.c5
-rw-r--r--drivers/iio/pressure/bmp280.h164
-rw-r--r--drivers/iio/pressure/dlhl60d.c5
-rw-r--r--drivers/iio/pressure/dps310.c262
-rw-r--r--drivers/iio/pressure/icp10100.c10
-rw-r--r--drivers/iio/pressure/st_pressure.h2
-rw-r--r--drivers/iio/pressure/st_pressure_core.c70
-rw-r--r--drivers/iio/pressure/st_pressure_i2c.c5
-rw-r--r--drivers/iio/pressure/st_pressure_spi.c5
-rw-r--r--drivers/iio/proximity/srf04.c10
-rw-r--r--drivers/iio/proximity/sx9310.c8
-rw-r--r--drivers/iio/proximity/sx9324.c8
-rw-r--r--drivers/iio/proximity/sx9360.c8
-rw-r--r--drivers/iio/temperature/mlx90614.c41
-rw-r--r--drivers/iio/temperature/mlx90632.c61
-rw-r--r--drivers/iio/test/iio-test-rescale.c4
-rw-r--r--drivers/interconnect/core.c10
-rw-r--r--drivers/interconnect/imx/imx.c4
-rw-r--r--drivers/interconnect/imx/imx.h2
-rw-r--r--drivers/interconnect/imx/imx8mm.c4
-rw-r--r--drivers/interconnect/imx/imx8mn.c4
-rw-r--r--drivers/interconnect/imx/imx8mp.c4
-rw-r--r--drivers/interconnect/imx/imx8mq.c4
-rw-r--r--drivers/interconnect/qcom/Kconfig2
-rw-r--r--drivers/interconnect/qcom/icc-common.c3
-rw-r--r--drivers/interconnect/qcom/icc-rpm.c4
-rw-r--r--drivers/interconnect/qcom/icc-rpmh.c4
-rw-r--r--drivers/interconnect/qcom/msm8974.c4
-rw-r--r--drivers/interconnect/qcom/osm-l3.c4
-rw-r--r--drivers/interconnect/qcom/sm8450.c4
-rw-r--r--drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c21
-rw-r--r--drivers/ipack/ipack.c5
-rw-r--r--drivers/misc/Kconfig1
-rw-r--r--drivers/misc/Makefile3
-rw-r--r--drivers/misc/altera-stapl/altera.c8
-rw-r--r--drivers/misc/bcm-vk/bcm_vk_dev.c8
-rw-r--r--drivers/misc/eeprom/eeprom.c2
-rw-r--r--drivers/misc/eeprom/idt_89hpesx.c2
-rw-r--r--drivers/misc/fastrpc.c2
-rw-r--r--drivers/misc/habanalabs/Kconfig1
-rw-r--r--drivers/misc/habanalabs/Makefile8
-rw-r--r--drivers/misc/habanalabs/common/command_buffer.c127
-rw-r--r--drivers/misc/habanalabs/common/command_submission.c75
-rw-r--r--drivers/misc/habanalabs/common/debugfs.c35
-rw-r--r--drivers/misc/habanalabs/common/device.c147
-rw-r--r--drivers/misc/habanalabs/common/firmware_if.c184
-rw-r--r--drivers/misc/habanalabs/common/habanalabs.h171
-rw-r--r--drivers/misc/habanalabs/common/habanalabs_drv.c44
-rw-r--r--drivers/misc/habanalabs/common/habanalabs_ioctl.c123
-rw-r--r--drivers/misc/habanalabs/common/hw_queue.c4
-rw-r--r--drivers/misc/habanalabs/common/hwmon.c24
-rw-r--r--drivers/misc/habanalabs/common/memory.c57
-rw-r--r--drivers/misc/habanalabs/common/memory_mgr.c10
-rw-r--r--drivers/misc/habanalabs/common/mmu/mmu.c31
-rw-r--r--drivers/misc/habanalabs/common/sysfs.c10
-rw-r--r--drivers/misc/habanalabs/gaudi/gaudi.c185
-rw-r--r--drivers/misc/habanalabs/gaudi2/gaudi2.c671
-rw-r--r--drivers/misc/habanalabs/gaudi2/gaudi2P.h10
-rw-r--r--drivers/misc/habanalabs/gaudi2/gaudi2_masks.h21
-rw-r--r--drivers/misc/habanalabs/gaudi2/gaudi2_security.c26
-rw-r--r--drivers/misc/habanalabs/goya/goya.c62
-rw-r--r--drivers/misc/habanalabs/include/common/cpucp_if.h103
-rw-r--r--drivers/misc/habanalabs/include/common/hl_boot_if.h37
-rw-r--r--drivers/misc/habanalabs/include/gaudi2/asic_reg/gaudi2_regs.h2
-rw-r--r--drivers/misc/habanalabs/include/gaudi2/asic_reg/pcie_wrap_special_regs.h185
-rw-r--r--drivers/misc/habanalabs/include/gaudi2/gaudi2_async_virt_events.h57
-rw-r--r--drivers/misc/ics932s401.c2
-rw-r--r--drivers/misc/mchp_pci1xxxx/Kconfig13
-rw-r--r--drivers/misc/mchp_pci1xxxx/Makefile1
-rw-r--r--drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c165
-rw-r--r--drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.h28
-rw-r--r--drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c427
-rw-r--r--drivers/misc/mei/bus-fixup.c2
-rw-r--r--drivers/misc/mei/gsc-me.c1
-rw-r--r--drivers/misc/mei/hw-txe.c2
-rw-r--r--drivers/misc/ocxl/file.c2
-rw-r--r--drivers/misc/pci_endpoint_test.c34
-rw-r--r--drivers/misc/sgi-xp/xp.h4
-rw-r--r--drivers/misc/vmw_vmci/vmci_queue_pair.c16
-rw-r--r--drivers/misc/xilinx_sdfec.c3
-rw-r--r--drivers/mtd/mtdcore.c28
-rw-r--r--drivers/nvmem/Kconfig313
-rw-r--r--drivers/nvmem/Makefile120
-rw-r--r--drivers/nvmem/brcm_nvram.c2
-rw-r--r--drivers/nvmem/core.c27
-rw-r--r--drivers/nvmem/lan9662-otpc.c222
-rw-r--r--drivers/nvmem/u-boot-env.c219
-rw-r--r--drivers/parport/parport_pc.c4
-rw-r--r--drivers/slimbus/Kconfig3
-rw-r--r--drivers/slimbus/qcom-ngd-ctrl.c31
-rw-r--r--drivers/soc/mediatek/Kconfig2
-rw-r--r--drivers/spmi/spmi-pmic-arb.c91
-rw-r--r--drivers/spmi/spmi.c4
-rw-r--r--drivers/staging/iio/Kconfig1
-rw-r--r--drivers/staging/iio/Makefile1
-rw-r--r--drivers/staging/iio/cdc/Kconfig17
-rw-r--r--drivers/staging/iio/cdc/Makefile6
-rw-r--r--drivers/staging/iio/frequency/ad9832.c4
-rw-r--r--drivers/staging/iio/frequency/ad9834.c2
-rw-r--r--drivers/staging/iio/meter/ade7854.h2
-rw-r--r--drivers/staging/iio/resolver/ad2s1210.c4
-rw-r--r--drivers/thermal/qcom/Kconfig2
-rw-r--r--drivers/thermal/qcom/qcom-spmi-adc-tm5.c3
-rw-r--r--drivers/uio/uio_dfl.c2
-rw-r--r--drivers/virt/vboxguest/vboxguest_core.c2
-rw-r--r--drivers/virt/vboxguest/vboxguest_linux.c16
-rw-r--r--drivers/w1/w1_netlink.c3
-rw-r--r--include/dt-bindings/iio/adc/at91-sama5d2_adc.h3
-rw-r--r--include/linux/coresight.h23
-rw-r--r--include/linux/counter.h187
-rw-r--r--include/linux/iio/consumer.h28
-rw-r--r--include/linux/iio/iio-opaque.h2
-rw-r--r--include/linux/iio/iio.h8
-rw-r--r--include/linux/iio/types.h3
-rw-r--r--include/linux/interconnect-provider.h5
-rw-r--r--include/linux/mtd/mtd.h1
-rw-r--r--include/linux/string_helpers.h5
-rw-r--r--include/linux/units.h3
-rw-r--r--include/trace/events/habanalabs.h93
-rw-r--r--include/uapi/linux/counter.h8
-rw-r--r--include/uapi/linux/iio/types.h10
-rw-r--r--include/uapi/misc/habanalabs.h137
-rw-r--r--tools/iio/iio_event_monitor.c14
411 files changed, 18105 insertions, 3573 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
index 8e53a32f8150..08b1964f27d3 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
@@ -516,3 +516,11 @@ Contact: Mathieu Poirier <mathieu.poirier@linaro.org>
Description: (Read) Returns the number of special conditional P1 right-hand keys
that the trace unit can use (0x194). The value is taken
directly from the HW.
+
+What: /sys/bus/coresight/devices/etm<N>/ts_source
+Date: October 2022
+KernelVersion: 6.1
+Contact: Mathieu Poirier <mathieu.poirier@linaro.org> or Suzuki K Poulose <suzuki.poulose@arm.com>
+Description: (Read) When FEAT_TRF is implemented, value of TRFCR_ELx.TS used for
+ trace session. Otherwise -1 indicates an unknown time source. Check
+ trcidr0.tssize to see if a global timestamp is available.
diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter
index 06c2b3e27e0b..ff83320b4255 100644
--- a/Documentation/ABI/testing/sysfs-bus-counter
+++ b/Documentation/ABI/testing/sysfs-bus-counter
@@ -4,6 +4,12 @@ Contact: linux-iio@vger.kernel.org
Description:
Count data of Count Y represented as a string.
+What: /sys/bus/counter/devices/counterX/countY/capture
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Historical capture of the Count Y count data.
+
What: /sys/bus/counter/devices/counterX/countY/ceiling
KernelVersion: 5.2
Contact: linux-iio@vger.kernel.org
@@ -203,6 +209,13 @@ Description:
both edges:
Any state transition.
+What: /sys/bus/counter/devices/counterX/countY/num_overflows
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ This attribute indicates the number of overflows of count Y.
+
+What: /sys/bus/counter/devices/counterX/countY/capture_component_id
What: /sys/bus/counter/devices/counterX/countY/ceiling_component_id
What: /sys/bus/counter/devices/counterX/countY/floor_component_id
What: /sys/bus/counter/devices/counterX/countY/count_mode_component_id
@@ -213,11 +226,14 @@ What: /sys/bus/counter/devices/counterX/countY/prescaler_component_id
What: /sys/bus/counter/devices/counterX/countY/preset_component_id
What: /sys/bus/counter/devices/counterX/countY/preset_enable_component_id
What: /sys/bus/counter/devices/counterX/countY/signalZ_action_component_id
+What: /sys/bus/counter/devices/counterX/countY/num_overflows_component_id
What: /sys/bus/counter/devices/counterX/signalY/cable_fault_component_id
What: /sys/bus/counter/devices/counterX/signalY/cable_fault_enable_component_id
What: /sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler_component_id
What: /sys/bus/counter/devices/counterX/signalY/index_polarity_component_id
+What: /sys/bus/counter/devices/counterX/signalY/polarity_component_id
What: /sys/bus/counter/devices/counterX/signalY/synchronous_mode_component_id
+What: /sys/bus/counter/devices/counterX/signalY/frequency_component_id
KernelVersion: 5.16
Contact: linux-iio@vger.kernel.org
Description:
@@ -303,6 +319,19 @@ Description:
Discrete set of available values for the respective Signal Y
configuration are listed in this file.
+What: /sys/bus/counter/devices/counterX/signalY/polarity
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Active level of Signal Y. The following polarity values are
+ available:
+
+ positive:
+ Signal high state considered active level (rising edge).
+
+ negative:
+ Signal low state considered active level (falling edge).
+
What: /sys/bus/counter/devices/counterX/signalY/name
KernelVersion: 5.2
Contact: linux-iio@vger.kernel.org
@@ -345,3 +374,9 @@ Description:
via index_polarity. The index function (as enabled via
preset_enable) is performed synchronously with the
quadrature clock on the active level of the index input.
+
+What: /sys/bus/counter/devices/counterX/signalY/frequency
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Read-only attribute that indicates the signal Y frequency, in Hz.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index e81ba6f5e1c8..6ba34c0d9789 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -196,7 +196,7 @@ Description:
Raw capacitance measurement from channel Y. Units after
application of scale and offset are nanofarads.
-What: /sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
KernelVersion: 3.2
Contact: linux-iio@vger.kernel.org
Description:
@@ -207,6 +207,25 @@ Description:
is required is a consistent labeling. Units after application
of scale and offset are nanofarads.
+What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ For differential channels, this an offset that is applied
+ equally to both inputs. As the reading is of the difference
+ between the two inputs, this should not be applied to the _raw
+ reading by userspace (unlike _offset) and unlike calibbias
+ it does not affect the differential value measured because
+ the effect of _zeropoint cancels out across the two inputs
+ that make up the differential pair. It's purpose is to bring
+ the individual signals, before the differential is measured,
+ within the measurement range of the device. The naming is
+ chosen because if the separate inputs that make the
+ differential pair are drawn on a graph in their
+ _raw units, this is the value that the zero point on the
+ measurement axis represents. It is expressed with the
+ same scaling as _raw.
+
What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw
What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw
What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw
@@ -241,6 +260,15 @@ Description:
Has all of the equivalent parameters as per voltageY. Units
after application of scale and offset are m/s^2.
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_x_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_y_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_z_raw
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ As per in_accel_X_raw attributes, but minus the
+ acceleration due to gravity.
+
What: /sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw
What: /sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw
What: /sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw
@@ -2038,3 +2066,99 @@ Description:
Available range for the forced calibration value, expressed as:
- a range specified as "[min step max]"
+
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageX_sampling_frequency
+What: /sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency
+What: /sys/bus/iio/devices/iio:deviceX/in_currentZ_sampling_frequency
+KernelVersion: 5.20
+Contact: linux-iio@vger.kernel.org
+Description:
+ Some devices have separate controls of sampling frequency for
+ individual channels. If multiple channels are enabled in a scan,
+ then the sampling_frequency of the scan may be computed from the
+ per channel sampling frequencies.
+
+What: /sys/.../events/in_accel_gesture_singletap_en
+What: /sys/.../events/in_accel_gesture_doubletap_en
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Device generates an event on a single or double tap.
+
+What: /sys/.../events/in_accel_gesture_singletap_value
+What: /sys/.../events/in_accel_gesture_doubletap_value
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the threshold value that the device is comparing
+ against to generate the tap gesture event. The lower
+ threshold value increases the sensitivity of tap detection.
+ Units and the exact meaning of value are device-specific.
+
+What: /sys/.../events/in_accel_gesture_tap_value_available
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Lists all available threshold values which can be used to
+ modify the sensitivity of the tap detection.
+
+What: /sys/.../events/in_accel_gesture_singletap_reset_timeout
+What: /sys/.../events/in_accel_gesture_doubletap_reset_timeout
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the timeout value in seconds for the tap detector
+ to not to look for another tap event after the event as
+ occurred. Basically the minimum quiet time between the two
+ single-tap's or two double-tap's.
+
+What: /sys/.../events/in_accel_gesture_tap_reset_timeout_available
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Lists all available tap reset timeout values. Units in seconds.
+
+What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the minimum quiet time in seconds between the two
+ taps of a double tap.
+
+What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay_available
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Lists all available delay values between two taps in the double
+ tap. Units in seconds.
+
+What: /sys/.../events/in_accel_gesture_tap_maxtomin_time
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Specifies the maximum time difference allowed between upper
+ and lower peak of tap to consider it as the valid tap event.
+ Units in seconds.
+
+What: /sys/.../events/in_accel_gesture_tap_maxtomin_time_available
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Lists all available time values between upper peak to lower
+ peak. Units in seconds.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_rot_yaw_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_rot_pitch_raw
+What: /sys/bus/iio/devices/iio:deviceX/in_rot_roll_raw
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Raw (unscaled) euler angles readings. Units after
+ application of scale are deg.
+
+What: /sys/bus/iio/devices/iio:deviceX/serialnumber
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ An example format is 16-bytes, 2-digits-per-byte, HEX-string
+ representing the sensor unique ID number.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-bno055 b/Documentation/ABI/testing/sysfs-bus-iio-bno055
new file mode 100644
index 000000000000..f32b1644e986
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-bno055
@@ -0,0 +1,81 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_raw_range
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Raw (unscaled) range for acceleration readings. Unit after
+ application of scale is m/s^2. Note that this doesn't affects
+ the scale (which should be used when changing the maximum and
+ minimum readable value affects also the reading scaling factor).
+
+What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Range for angular velocity readings in radians per second. Note
+ that this does not affects the scale (which should be used when
+ changing the maximum and minimum readable value affects also the
+ reading scaling factor).
+
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_raw_range_available
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ List of allowed values for in_accel_raw_range attribute
+
+What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range_available
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ List of allowed values for in_anglvel_raw_range attribute
+
+What: /sys/bus/iio/devices/iio:deviceX/in_magn_calibration_fast_enable
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Can be 1 or 0. Enables/disables the "Fast Magnetometer
+ Calibration" HW function.
+
+What: /sys/bus/iio/devices/iio:deviceX/fusion_enable
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Can be 1 or 0. Enables/disables the "sensor fusion" (a.k.a.
+ NDOF) HW function.
+
+What: /sys/bus/iio/devices/iio:deviceX/calibration_data
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Reports the binary calibration data blob for the IMU sensors.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_accel_calibration_auto_status
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Reports the autocalibration status for the accelerometer sensor.
+ Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+ the number, the better the calibration status.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_gyro_calibration_auto_status
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Reports the autocalibration status for the gyroscope sensor.
+ Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+ the number, the better the calibration status.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_magn_calibration_auto_status
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Reports the autocalibration status for the magnetometer sensor.
+ Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+ the number, the better the calibration status.
+
+What: /sys/bus/iio/devices/iio:deviceX/sys_calibration_auto_status
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Reports the status for the IMU overall autocalibration.
+ Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+ the number, the better the calibration status.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746 b/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746
new file mode 100644
index 000000000000..02ca8941dce1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746
@@ -0,0 +1,11 @@
+What: /sys/.../iio:deviceX/in_capacitableY_calibbias_calibration
+What: /sys/.../iio:deviceX/in_capacitableY_calibscale_calibration
+KernelVersion: 6.1
+Contact: linux-iio@vger.kernel.org
+Description:
+ Write 1 to trigger a calibration of the calibbias or
+ calibscale. For calibscale, a full scale capacitance should
+ be connected to the capacitance input and a
+ calibscale_calibration then started. For calibbias see
+ the device datasheet section on "capacitive system offset
+ calibration".
diff --git a/Documentation/ABI/testing/sysfs-devices-hisi_ptt b/Documentation/ABI/testing/sysfs-devices-hisi_ptt
new file mode 100644
index 000000000000..82de6d710266
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-hisi_ptt
@@ -0,0 +1,61 @@
+What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune
+Date: October 2022
+KernelVersion: 6.1
+Contact: Yicong Yang <yangyicong@hisilicon.com>
+Description: This directory contains files for tuning the PCIe link
+ parameters(events). Each file is named after the event
+ of the PCIe link.
+
+ See Documentation/trace/hisi-ptt.rst for more information.
+
+What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl
+Date: October 2022
+KernelVersion: 6.1
+Contact: Yicong Yang <yangyicong@hisilicon.com>
+Description: (RW) Controls the weight of Tx completion TLPs, which influence
+ the proportion of outbound completion TLPs on the PCIe link.
+ The available tune data is [0, 1, 2]. Writing a negative value
+ will return an error, and out of range values will be converted
+ to 2. The value indicates a probable level of the event.
+
+What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np
+Date: October 2022
+KernelVersion: 6.1
+Contact: Yicong Yang <yangyicong@hisilicon.com>
+Description: (RW) Controls the weight of Tx non-posted TLPs, which influence
+ the proportion of outbound non-posted TLPs on the PCIe link.
+ The available tune data is [0, 1, 2]. Writing a negative value
+ will return an error, and out of range values will be converted
+ to 2. The value indicates a probable level of the event.
+
+What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p
+Date: October 2022
+KernelVersion: 6.1
+Contact: Yicong Yang <yangyicong@hisilicon.com>
+Description: (RW) Controls the weight of Tx posted TLPs, which influence the
+ proportion of outbound posted TLPs on the PCIe link.
+ The available tune data is [0, 1, 2]. Writing a negative value
+ will return an error, and out of range values will be converted
+ to 2. The value indicates a probable level of the event.
+
+What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level
+Date: October 2022
+KernelVersion: 6.1
+Contact: Yicong Yang <yangyicong@hisilicon.com>
+Description: (RW) Control the allocated buffer watermark for inbound packets.
+ The packets will be stored in the buffer first and then transmitted
+ either when the watermark reached or when timed out.
+ The available tune data is [0, 1, 2]. Writing a negative value
+ will return an error, and out of range values will be converted
+ to 2. The value indicates a probable level of the event.
+
+What: /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level
+Date: October 2022
+KernelVersion: 6.1
+Contact: Yicong Yang <yangyicong@hisilicon.com>
+Description: (RW) Control the allocated buffer watermark of outbound packets.
+ The packets will be stored in the buffer first and then transmitted
+ either when the watermark reached or when timed out.
+ The available tune data is [0, 1, 2]. Writing a negative value
+ will return an error, and out of range values will be converted
+ to 2. The value indicates a probable level of the event.
diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs
index 96646fb2e7a1..13b5b2ec3be7 100644
--- a/Documentation/ABI/testing/sysfs-driver-habanalabs
+++ b/Documentation/ABI/testing/sysfs-driver-habanalabs
@@ -16,7 +16,7 @@ Description: Version of the application running on the device's CPU
What: /sys/class/habanalabs/hl<n>/clk_max_freq_mhz
Date: Jun 2019
-KernelVersion: not yet upstreamed
+KernelVersion: 5.7
Contact: ogabbay@kernel.org
Description: Allows the user to set the maximum clock frequency, in MHz.
The device clock might be set to lower value than the maximum.
@@ -26,7 +26,7 @@ Description: Allows the user to set the maximum clock frequency, in MHz.
What: /sys/class/habanalabs/hl<n>/clk_cur_freq_mhz
Date: Jun 2019
-KernelVersion: not yet upstreamed
+KernelVersion: 5.7
Contact: ogabbay@kernel.org
Description: Displays the current frequency, in MHz, of the device clock.
This property is valid only for the Gaudi ASIC family
@@ -176,6 +176,12 @@ KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Version of the device's preboot F/W code
+What: /sys/class/habanalabs/hl<n>/security_enabled
+Date: Oct 2022
+KernelVersion: 6.1
+Contact: obitton@habana.ai
+Description: Displays the device's security status
+
What: /sys/class/habanalabs/hl<n>/soft_reset
Date: Jan 2019
KernelVersion: 5.1
@@ -230,6 +236,6 @@ Description: Version of the u-boot running on the device's CPU
What: /sys/class/habanalabs/hl<n>/vrm_ver
Date: Jan 2022
-KernelVersion: not yet upstreamed
+KernelVersion: 5.17
Contact: ogabbay@kernel.org
Description: Version of the Device's Voltage Regulator Monitor F/W code. N/A to GOYA and GAUDI
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
index d783d9276124..2bae06eed693 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
@@ -61,6 +61,9 @@ properties:
maxItems: 1
description: Address translation error interrupt
+ power-domains:
+ maxItems: 1
+
in-ports:
$ref: /schemas/graph.yaml#/properties/ports
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
index 72ffe4d1e948..0c5b875cb654 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
@@ -98,6 +98,9 @@ properties:
base cti node if compatible string arm,coresight-cti-v8-arch is used,
or may appear in a trig-conns child node when appropriate.
+ power-domains:
+ maxItems: 1
+
arm,cti-ctm-id:
$ref: /schemas/types.yaml#/definitions/uint32
description:
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
index 1eeedc22857c..44a1041cb0fc 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
@@ -54,6 +54,9 @@ properties:
- const: apb_pclk
- const: atclk
+ power-domains:
+ maxItems: 1
+
in-ports:
$ref: /schemas/graph.yaml#/properties/ports
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
index a26ed9214e00..03792e9bd97a 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
@@ -54,6 +54,9 @@ properties:
- const: apb_pclk
- const: atclk
+ power-domains:
+ maxItems: 1
+
qcom,replicator-loses-context:
type: boolean
description:
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
index fd06ede26ceb..90679788e0bf 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
@@ -54,6 +54,9 @@ properties:
- const: apb_pclk
- const: atclk
+ power-domains:
+ maxItems: 1
+
in-ports:
$ref: /schemas/graph.yaml#/properties/ports
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
index e0377ce48537..01200f67504a 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
@@ -73,6 +73,9 @@ properties:
- const: apb_pclk
- const: atclk
+ power-domains:
+ maxItems: 1
+
arm,coresight-loses-context-with-cpu:
type: boolean
description:
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
index 374083956b20..cc8c3baa79b4 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
@@ -27,6 +27,9 @@ properties:
compatible:
const: arm,coresight-static-funnel
+ power-domains:
+ maxItems: 1
+
in-ports:
$ref: /schemas/graph.yaml#/properties/ports
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
index a34d8583830c..1892a091ac35 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
@@ -27,6 +27,9 @@ properties:
compatible:
const: arm,coresight-static-replicator
+ power-domains:
+ maxItems: 1
+
in-ports:
$ref: /schemas/graph.yaml#/properties/ports
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
index 905008faa012..378380c3f5aa 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
@@ -61,6 +61,9 @@ properties:
- const: apb_pclk
- const: atclk
+ power-domains:
+ maxItems: 1
+
out-ports:
$ref: /schemas/graph.yaml#/properties/ports
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
index 3463b6e53aef..cb8dceaca70e 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
@@ -55,6 +55,12 @@ properties:
- const: apb_pclk
- const: atclk
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
arm,buffer-size:
$ref: /schemas/types.yaml#/definitions/uint32
deprecated: true
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
index e80d48200c37..61a0cdc27745 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
@@ -54,6 +54,9 @@ properties:
- const: apb_pclk
- const: atclk
+ power-domains:
+ maxItems: 1
+
in-ports:
$ref: /schemas/graph.yaml#/properties/ports
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
index 5f07fb166c56..108460627d9a 100644
--- a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
@@ -33,6 +33,9 @@ properties:
Handle to the cpu this ETE is bound to.
$ref: /schemas/types.yaml#/definitions/phandle
+ power-domains:
+ maxItems: 1
+
out-ports:
description: |
Output connections from the ETE to legacy CoreSight trace bus.
diff --git a/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
new file mode 100644
index 000000000000..4e0b2d2b303e
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Capture (eCAP) Module
+
+maintainers:
+ - Julien Panis <jpanis@baylibre.com>
+
+description: |
+ The eCAP module resources can be used to capture timestamps
+ on input signal events (falling/rising edges).
+
+properties:
+ compatible:
+ const: ti,am62-ecap-capture
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: fck
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ capture@23100000 { /* eCAP in capture mode on am62x */
+ compatible = "ti,am62-ecap-capture";
+ reg = <0x00 0x23100000 0x00 0x100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 51 0>;
+ clock-names = "fck";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
index aee45cb15592..527532f039ce 100644
--- a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
+++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
@@ -22,13 +22,14 @@ properties:
description: SPI chip select
maxItems: 1
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml
new file mode 100644
index 000000000000..3dbdc5af2804
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,occ-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM On-Chip Controller (OCC) accessed from a service processor
+
+maintainers:
+ - Eddie James <eajames@linux.ibm.com>
+
+description: |
+ The POWER processor On-Chip Controller (OCC) helps manage power and
+ thermals for the system. A service processor or baseboard management
+ controller can query the OCC for it's power and thermal data to report
+ through hwmon.
+
+properties:
+ compatible:
+ enum:
+ - ibm,p9-occ-hwmon
+ - ibm,p10-occ-hwmon
+
+ ibm,no-poll-on-init:
+ description: This property describes whether or not the OCC should
+ be polled during driver initialization.
+ type: boolean
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ hwmon {
+ compatible = "ibm,p10-occ-hwmon";
+ ibm,no-poll-on-init;
+ };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
index 6f8f8a6258fe..7332442e5661 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
@@ -27,15 +27,16 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
index 8d829ef878bc..f6f97164c2ca 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -25,14 +25,15 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
required:
- compatible
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
index d6afc1b8c272..185b68ffb536 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
@@ -4,28 +4,30 @@
$id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Analog Devices ADXL313 3-Axis Digital Accelerometer
+title: Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometers
maintainers:
- Lucas Stankus <lucas.p.stankus@gmail.com>
description: |
- Analog Devices ADXL313 3-Axis Digital Accelerometer that supports
- both I2C & SPI interfaces.
+ Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometer that
+ support both I2C & SPI interfaces.
+ https://www.analog.com/en/products/adxl312.html
https://www.analog.com/en/products/adxl313.html
+ https://www.analog.com/en/products/adxl314.html
properties:
compatible:
enum:
+ - adi,adxl312
- adi,adxl313
+ - adi,adxl314
reg:
maxItems: 1
spi-3wire: true
- spi-max-frequency: true
-
vs-supply:
description: Regulator that supplies power to the accelerometer
@@ -48,7 +50,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index 9bb039e2f533..346abfb13a3a 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -32,8 +32,6 @@ properties:
spi-cpol: true
- spi-max-frequency: true
-
interrupts:
maxItems: 1
@@ -42,7 +40,10 @@ required:
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
index ba54d6998f2e..14b487088ab4 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -45,13 +45,14 @@ properties:
vddio-supply:
description: Regulator that provides power to the bus
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
index d259e796c1d6..f10d98d34cb8 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
@@ -35,8 +35,6 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
vddio-supply: true
@@ -45,7 +43,10 @@ required:
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
index 38b59b6454ce..73a5c8f814cc 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -25,14 +25,15 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
required:
- compatible
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
index 942b23ad0712..5dd06f5905b4 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
@@ -20,8 +20,6 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
vdda-supply: true
vddd-supply: true
vddio-supply: true
@@ -30,7 +28,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
index 478e75ae0885..457a709b583c 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
@@ -72,7 +72,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
index 272eb48eef5a..3cb82576d758 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
@@ -24,8 +24,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
vddio-supply: true
@@ -50,7 +48,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
index 9c7c66feeffc..c8659c5eba2a 100644
--- a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
@@ -39,13 +39,14 @@ properties:
- "INT1"
- "INT2"
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
index 390b87242fcb..f64d99b35492 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
@@ -29,13 +29,14 @@ properties:
mount-matrix:
description: an optional 3x3 mounting rotation matrix.
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
new file mode 100644
index 000000000000..23528dcaa073
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MEMSensing digital 3-Axis accelerometer
+
+maintainers:
+ - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+description: |
+ MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
+ sensitivity consumer applications. It has dynamical user selectable full
+ scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
+ with output data rates from 1Hz to 1000Hz.
+ Datasheet can be found at following URL
+ https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf
+
+properties:
+ compatible:
+ const: memsensing,msa311
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ accelerometer@62 {
+ compatible = "memsensing,msa311";
+ reg = <0x62>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+ vdd-supply = <&vcc_5v>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
index f6e2a16a710b..00c990caa1e4 100644
--- a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
@@ -29,7 +29,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
index ad529ab2c6e2..65ce8ea14b52 100644
--- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@@ -27,8 +27,6 @@ properties:
vdd-supply:
description: phandle to the regulator that provides power to the accelerometer
- spi-max-frequency: true
-
interrupts:
maxItems: 1
@@ -44,7 +42,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
index fb3d0dae9bae..75a7184a4735 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -52,8 +52,6 @@ properties:
avdd-supply:
description: avdd supply can be used as reference for conversion.
- spi-max-frequency: true
-
required:
- compatible
- reg
@@ -106,7 +104,10 @@ patternProperties:
additionalProperties: false
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index 22b7ed3723f6..cc347dade4ef 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -30,8 +30,6 @@ properties:
spi-cpha: true
- spi-max-frequency: true
-
clocks:
maxItems: 1
description: phandle to the master clock (mclk)
@@ -94,7 +92,10 @@ required:
- spi-cpol
- spi-cpha
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
index a694d5794d4a..dfb8f305e2f0 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
@@ -28,8 +28,6 @@ properties:
description: IRQ line for the ADC
maxItems: 1
- spi-max-frequency: true
-
adi,voltage-alert-last-chan:
$ref: /schemas/types.yaml#/definitions/uint32
description:
@@ -55,7 +53,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
index a3e39a40c9b3..1bfbeed6f299 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -30,8 +30,6 @@ properties:
spi-cpha: true
- spi-max-frequency: true
-
'#address-cells':
const: 1
@@ -65,7 +63,10 @@ patternProperties:
additionalProperties: true
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
index ca414bb396c5..cd8ac5162d27 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
@@ -24,13 +24,15 @@ properties:
vref-supply: true
vdd-supply: true
- spi-max-frequency: true
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
index 666414a9c0de..44c671eeda73 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
@@ -66,8 +66,6 @@ properties:
to the other supplies. Needed to be able to establish channel scaling
unless there is also an internal reference available (e.g. ad7091r)
- spi-max-frequency: true
-
adi,conversion-start-gpios:
description: A GPIO used to trigger the start of a conversion
maxItems: 1
@@ -76,9 +74,9 @@ required:
- compatible
- reg
-additionalProperties: false
-
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
# Devices where reference is vcc
- if:
properties:
@@ -158,6 +156,8 @@ allOf:
properties:
adi,conversion-start-gpios: false
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 516fc24d3346..ac5a47c8f070 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -32,8 +32,6 @@ properties:
spi-cpol: true
- spi-max-frequency: true
-
avcc-supply: true
interrupts:
@@ -105,7 +103,10 @@ required:
- interrupts
- adi,conversion-start-gpios
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
index a85a28145ef6..3ce59d4d065f 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
@@ -50,8 +50,6 @@ properties:
reset-gpios:
maxItems: 1
- spi-max-frequency: true
-
spi-cpol: true
spi-cpha: true
@@ -88,7 +86,10 @@ patternProperties:
- reg
additionalProperties: false
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
index e82194974eea..07f9d1c09c7d 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
@@ -8,7 +8,6 @@ title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs.
maintainers:
- Michael Hennerich <michael.hennerich@analog.com>
- - Patrick Vasseur <patrick.vasseur@c-s.fr>
description: |
Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908,
@@ -37,19 +36,24 @@ properties:
description: |
The regulator supply for ADC reference voltage.
+ adi,range-double:
+ description: Sets the analog input range from 0 to 2xVREF.
+ type: boolean
+
'#address-cells':
const: 1
'#size-cells':
const: 0
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
index 0b10ed5f74ae..9ee4d977c5ed 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
@@ -49,8 +49,6 @@ properties:
default: 4096000
- spi-max-frequency: true
-
'#io-channel-cells':
const: 1
@@ -64,7 +62,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
index 52490cbb0af0..56bcbe5dcd79 100644
--- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
@@ -24,8 +24,6 @@ properties:
GPIO used for controlling the reset pin
maxItems: 1
- spi-max-frequency: true
-
"#io-channel-cells":
const: 1
@@ -33,7 +31,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
index 0bd2fc0356c8..5207c919abe0 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -22,15 +22,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency:
- description: maximal spi bus frequency supported
-
required:
- compatible
- vref-supply
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
index c1772b568cd1..875f394576c2 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
@@ -13,10 +13,14 @@ description: |
16bit ADC supporting up to 16 single ended or 8 differential inputs.
I2C interface.
+ https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf
+
properties:
compatible:
- const:
- lltc,ltc2497
+ enum:
+ - lltc,ltc2497
+ - lltc,ltc2499
reg: true
vref-supply: true
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
index 46b7747076b9..d0a7ed26d9ea 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
@@ -45,7 +45,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
index 0cf87556ef82..4f74cb33383a 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
@@ -26,13 +26,16 @@ properties:
minimum: 100000
maximum: 4800000
-additionalProperties: false
-
required:
- compatible
- reg
- vref-supply
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
index e948b3e37b0c..bb336e33ebe2 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
@@ -28,23 +28,25 @@ properties:
vref-supply:
description: External reference, needed to establish input scaling
-if:
- properties:
- compatible:
- contains:
- const: maxim,max1118
-then:
- required:
- - vref-supply
-else:
- properties:
- vref-supply: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: maxim,max1118
+ then:
+ required:
+ - vref-supply
+ else:
+ properties:
+ vref-supply: false
required:
- compatible
- reg
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
new file mode 100644
index 000000000000..5f9e043cf5cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX11205 ADC
+
+maintainers:
+ - Ramona Bolboaca <ramona.bolboaca@analog.com>
+
+description: |
+ The MAX11205 is an ultra-low-power (< 300FA max active current),
+ high-resolution, serial-output ADC.
+
+ https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - maxim,max11205a
+ - maxim,max11205b
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 5000000
+
+ spi-cpha: true
+
+ vref-supply:
+ description:
+ The regulator supply for the ADC reference voltage. This is a differential
+ reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - spi-max-frequency
+ - spi-cpha
+ - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ adc@0 {
+ compatible = "maxim,max11205a";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ spi-cpha;
+ interrupt-parent = <&gpio>;
+ interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+ vref-supply = <&max11205_vref>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
index 4c7e0d94bff1..58b12fe8070c 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -39,15 +39,16 @@ properties:
thus enabling power-down mode.
maxItems: 1
- spi-max-frequency: true
-
required:
- compatible
- reg
- vdd-supply
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
index fcc1ba53b20d..18108f0f3731 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
@@ -32,7 +32,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
spi-cpha: true
spi-cpol: true
@@ -51,7 +50,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index 95ab285f4eba..2c93fb41f172 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -36,6 +36,13 @@ properties:
description: IRQ line of the ADC
maxItems: 1
+ microchip,data-ready-hiz:
+ description:
+ Data Ready Pin Inactive State Control
+ true = The DR pin state is high-impedance
+ false = The DR pin state is logic high
+ type: boolean
+
microchip,device-addr:
description: Device address when multiple MCP3911 chips are present on the same SPI bus.
$ref: /schemas/types.yaml#/definitions/uint32
@@ -51,7 +58,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index 74a4a9d95798..8bac0c4120dd 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -58,6 +58,7 @@ required:
patternProperties:
"^.*@[0-9a-f]+$":
type: object
+ additionalProperties: false
description: |
Represents the external channels which are connected to the ADC.
For compatible property "qcom,spmi-vadc" following channels, also known as
diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
new file mode 100644
index 000000000000..88e008629ea8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC
+
+maintainers:
+ - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+ The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
+ interface, and the device provides full information for system by reading
+ out the loading current and power.
+
+ The device monitors both of the drops across sense resistor and the BUS
+ voltage, converts into the current in amperes, and power in watts through
+ internal analog-to-digital converter ADC. The programmable calibration,
+ adjustable conversion time, and averaging function are also built in for
+ more design flexibility.
+
+ Datasheet is available at
+ https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
+
+properties:
+ compatible:
+ const: richtek,rtq6056
+
+ reg:
+ maxItems: 1
+
+ "#io-channel-cells":
+ const: 1
+
+ shunt-resistor-micro-ohms:
+ description: Shunt IN+/IN- sensing node resistor
+
+required:
+ - compatible
+ - reg
+ - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ adc@40 {
+ compatible = "richtek,rtq6056";
+ reg = <0x40>;
+ #io-channel-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 92f9472a77ae..1970503389aa 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -72,6 +72,7 @@ additionalProperties: false
patternProperties:
"^filter@[0-9]+$":
type: object
+ unevaluatedProperties: false
description: child node
properties:
@@ -225,6 +226,7 @@ patternProperties:
patternProperties:
"^dfsdm-dai+$":
type: object
+ additionalProperties: false
description: child node
properties:
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
index 9049c699152f..333744a2159c 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
@@ -13,8 +13,7 @@ description:
This ADC forms part of an ST microelectronics STMPE multifunction device .
The ADC is shared with the STMPE touchscreen. As a result some ADC related
settings are specified in the parent node.
- The node name myst be stmpe_adc and should be a child node of the stmpe node
- to which it belongs.
+ The node should be a child node of the stmpe node to which it belongs.
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
index f5a923cc847f..686721176a58 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
@@ -24,8 +24,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: External reference, needed to establish input scaling
@@ -37,7 +35,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
index 1a113b30a414..726d2cbfa368 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
@@ -19,8 +19,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: External reference, needed to establish input scaling
@@ -37,7 +35,10 @@ required:
- spi-cpol
- spi-cpha
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
index ae5ce60987fe..9b072b057f16 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
@@ -19,7 +19,6 @@ properties:
reg: true
vref-supply: true
- spi-max-frequency: true
"#io-channel-cells":
const: 1
@@ -28,7 +27,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
index ec3b2edf1fb7..076088a328c3 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
@@ -31,8 +31,6 @@ properties:
maxItems: 1
description: Conversion clock input.
- spi-max-frequency: true
-
vref-p-supply:
description: The regulator supply for positive analog voltage reference
@@ -62,7 +60,10 @@ required:
- clocks
- vref-p-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
index d54a0183f024..775eee972b12 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
@@ -27,8 +27,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply: true
"#io-channel-cells":
@@ -39,7 +37,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
index 3f4f334d6f73..afe782522904 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
@@ -21,8 +21,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vdda-supply: true
"#io-channel-cells":
@@ -32,7 +30,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
index a3b79438a13a..2c3c2cf2145c 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
@@ -43,6 +43,7 @@ additionalProperties: false
patternProperties:
"^channel@[0-7]+$":
type: object
+ additionalProperties: false
description:
Child nodes needed for each channel that the platform uses.
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
index 2e6abc9d746a..56a3f1766aab 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
@@ -18,8 +18,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
spi-cpha: true
reset-gpios:
@@ -32,7 +30,10 @@ required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
index e0670e3fbb72..55c2c73626f4 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs
maintainers:
- - Tomislav Denis <tomislav.denis@avl.com>
+ - Jonathan Cameron <jic23@kernel.org>
description: |
The ADS131E0x are a family of multichannel, simultaneous sampling,
@@ -28,8 +28,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
spi-cpha: true
clocks:
@@ -120,7 +118,10 @@ patternProperties:
additionalProperties: false
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
index b8c398187d5c..f75b2c702986 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
@@ -19,8 +19,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: Supply the 2.5V or 5V reference voltage
@@ -32,7 +30,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
index a0af4b24877f..f26fdbc15f84 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
@@ -25,13 +25,14 @@ properties:
description: Optional external reference. If not supplied, assume
REFSEL input tied low to enable the internal reference.
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
index d6f21d5cccd7..b32be24a9f98 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
@@ -11,9 +11,14 @@ maintainers:
properties:
compatible:
- enum:
- - ti,am3359-adc
- - ti,am4372-adc
+ oneOf:
+ - enum:
+ - ti,am3359-adc
+ - ti,am4372-adc
+ - items:
+ - enum:
+ - ti,am654-adc
+ - const: ti,am3359-adc
'#io-channel-cells':
const: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
index 6c2539b3d707..314d1d99bf73 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
@@ -21,8 +21,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply: true
"#io-channel-cells":
@@ -33,7 +31,10 @@ required:
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
index 601d69971d84..bdf3bba2d750 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
@@ -23,7 +23,8 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
+ vref-supply:
+ description: Optional supply of the reference voltage
"#io-channel-cells":
const: 1
@@ -59,7 +60,10 @@ patternProperties:
additionalProperties: false
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
index 3698b4b0900f..be93c109d6ac 100644
--- a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
@@ -134,6 +134,7 @@ properties:
ams-pl@400:
type: object
+ additionalProperties: false
description:
PL-SYSMON is capable of monitoring off chip voltage and temperature.
PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
index baa65a521bad..03bb90a7f4f8 100644
--- a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
+++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
@@ -63,6 +63,7 @@ additionalProperties: false
patternProperties:
"^channel@[0-3]$":
type: object
+ additionalProperties: false
description: Represents the external channels which are connected to the device.
properties:
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
index 5277479be382..c15da155d300 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
@@ -27,14 +27,15 @@ properties:
Enable internal buffer to drive the reference pin.
type: boolean
- spi-max-frequency: true
-
required:
- compatible
- reg
- avdd-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
index 9c48c76993fe..fee0f023a8c8 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -78,6 +78,7 @@ patternProperties:
custom-output-range-config:
type: object
+ additionalProperties: false
description: Configuration of custom range when
adi,output-range-microvolt is not present.
The formulas for calculation the output voltages are
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
index 05ed4e0ec364..c04165fa9259 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
@@ -95,15 +95,12 @@ properties:
vrefD-supply: true
vref-supply: true
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- # Shared external vref, no internal reference
if:
properties:
@@ -232,6 +229,8 @@ allOf:
- vrefA-supply
- vrefB-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
index 65f86f26947c..86e2884cdfb1 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
@@ -28,10 +28,6 @@ properties:
vref1-supply: true
vref2-supply: true
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
@@ -39,6 +35,7 @@ required:
- vref1-supply
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -63,6 +60,8 @@ allOf:
required:
- vref2-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
index d599b418a020..ff50c72c62b5 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
@@ -39,14 +39,15 @@ properties:
description:
If not supplied devices will use internal regulators.
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
index 188f656617e3..52d089ebde95 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
@@ -26,13 +26,14 @@ properties:
maxItems: 1
description: Fault signal.
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
index 044332c97743..d2af2d491986 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
@@ -27,19 +27,16 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
VREF-supply: true
VREFA-supply: true
VREFB-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -72,6 +69,8 @@ allOf:
- VREFA-supply
- VREFB-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
index 330383b85eeb..4d5111a5f9bd 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
@@ -22,17 +22,18 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: If not present, internal reference will be used.
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
index 5c26441eae9f..13f214234b8e 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
@@ -53,14 +53,15 @@ properties:
vcc-supply:
description: If not supplied the internal reference is used.
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
index f866b88e1440..9a3c2926bf85 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
@@ -25,8 +25,6 @@ properties:
description: Either this or spi-cpol but not both.
spi-cpol: true
- spi-max-frequency: true
-
adi,ext-dc-dc-compenstation-resistor:
$ref: /schemas/types.yaml#/definitions/flag
description:
@@ -67,8 +65,6 @@ required:
- compatible
- reg
-additionalProperties: false
-
patternProperties:
"^channel@[0-7]$":
type: object
@@ -123,6 +119,11 @@ oneOf:
- required:
- spi-cpol
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
index fd4edca34a28..e49e7556175d 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
@@ -16,7 +16,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
spi-cpha: true
adi,dc-dc-mode:
@@ -99,6 +98,7 @@ required:
- adi,dc-dc-mode
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
adi,dc-dc-mode:
@@ -115,7 +115,7 @@ allOf:
required:
- adi,range-microvolt
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
index 7f95a9ed55fe..df550b5af2f7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
@@ -22,18 +22,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply:
description: If not supplied, internal reference will be used.
-additionalProperties: false
-
required:
- compatible
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -45,6 +42,8 @@ allOf:
required:
- vref-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
index 8e893d52bfb1..0b409a727a43 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
@@ -22,18 +22,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vrefAB-supply: true
vrefCD-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -46,6 +43,8 @@ allOf:
- vrefAB-supply
- vrefCD-supply
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
index 24ac40180ac1..8e7da0de918f 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -49,8 +49,6 @@ properties:
asserted during driver probe.
maxItems: 1
- spi-max-frequency: true
-
'#address-cells':
const: 1
@@ -62,6 +60,7 @@ properties:
connected to the DAC. Channel 0 can act both as a current
source and sink.
type: object
+ additionalProperties: false
properties:
reg:
@@ -85,6 +84,7 @@ properties:
description: Represents an external channel which are
connected to the DAC.
type: object
+ additionalProperties: false
properties:
reg:
@@ -101,6 +101,7 @@ properties:
description: Represents an external channel which are
connected to the DAC.
type: object
+ additionalProperties: false
properties:
reg:
@@ -116,6 +117,7 @@ properties:
patternProperties:
"^channel@([3-5])$":
type: object
+ additionalProperties: false
description: Represents the external channels which are connected to the DAC.
properties:
reg:
@@ -138,7 +140,10 @@ required:
- channel@4
- channel@5
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
index 650d1ebdcec3..3a84739736f6 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
@@ -23,19 +23,20 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
vss-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
- vdd-supply
- vss-supply
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
index 6a3990a8d0ad..1849a2ff05c7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
@@ -19,19 +19,16 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vrefh-supply: true
vrefl-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
- vrefh-supply
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -44,6 +41,8 @@ allOf:
properties:
vrefl-supply: false
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
index 48f9e7d29423..15cc6bf59b13 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
@@ -48,6 +48,7 @@ properties:
patternProperties:
"^channel@([0-9]|1[0-5])$":
type: object
+ additionalProperties: false
properties:
reg:
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
index 4c430abcdbf9..19374401e509 100644
--- a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
@@ -21,17 +21,18 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
vref-supply: true
-additionalProperties: false
-
required:
- compatible
- reg
- vref-supply
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
index b0157050f1ee..201b04af2b22 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
@@ -33,21 +33,22 @@ properties:
vref-supply:
description: Needed to provide output scaling.
- spi-max-frequency: true
-
required:
- compatible
- reg
- vref-supply
-additionalProperties: false
-
oneOf:
- required:
- spi-cpha
- required:
- spi-cpol
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
vref_2v5_reg: regulator-vref {
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
index 10be98d1f19c..a6814587dbc4 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
@@ -24,14 +24,15 @@ properties:
Reference voltage must be supplied to establish the scaling of the
output voltage.
- spi-max-frequency: true
-
required:
- compatible
- reg
- vref-supply
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
index d172b142f6ed..20dd1370660d 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
@@ -29,13 +29,14 @@ properties:
DACs are loaded when the pin connected to this GPIO is pulled low.
maxItems: 1
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
index 6b3a611e1cf1..0144f74a4768 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -40,15 +40,16 @@ properties:
output stage will shut down until the ADF4371/ADF4372 achieves lock as
measured by the digital lock detect circuitry.
- spi-max-frequency: true
-
required:
- compatible
- reg
- clocks
- clock-names
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
index d861526c5c42..6c5ad426a016 100644
--- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
@@ -25,14 +25,15 @@ properties:
reset-gpios: true
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
index 340be256f283..d166dbca18c3 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@@ -25,8 +25,6 @@ properties:
spi-cpol: true
- spi-max-frequency: true
-
interrupts:
maxItems: 1
@@ -35,7 +33,10 @@ required:
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
index dd29dc6c4c19..56e0dc20f5e4 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
@@ -47,8 +47,6 @@ properties:
- DIO3
- DIO4
- spi-max-frequency: true
-
spi-cpha: true
spi-cpol: true
@@ -96,8 +94,6 @@ properties:
- DIO3
- DIO4
-additionalProperties: false
-
required:
- compatible
- reg
@@ -106,6 +102,11 @@ required:
- spi-cpol
- spi-max-frequency
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
index 6e73cd889b5c..a0760382548d 100644
--- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -46,13 +46,14 @@ properties:
mount-matrix:
description: an optional 3x3 mounting rotation matrix
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml
new file mode 100644
index 000000000000..e0d06db161a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bno055.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BNO055
+
+maintainers:
+ - Andrea Merello <andrea.merello@iit.it>
+
+description: |
+ Inertial Measurement Unit with Accelerometer, Gyroscope, Magnetometer and
+ internal MCU for sensor fusion
+ https://www.bosch-sensortec.com/products/smart-sensors/bno055/
+
+properties:
+ compatible:
+ enum:
+ - bosch,bno055
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial {
+ imu {
+ compatible = "bosch,bno055";
+ reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>;
+ clocks = <&imu_clk>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imu@28 {
+ compatible = "bosch,bno055";
+ reg = <0x28>;
+ reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>;
+ clocks = <&imu_clk>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 4c1c083d0e92..488349755c99 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -47,7 +47,6 @@ properties:
vddio-supply:
description: Regulator that provides power to the bus
- spi-max-frequency: true
spi-cpha: true
spi-cpol: true
@@ -56,7 +55,10 @@ required:
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index 3ebc6526d82d..ec64d7877fe5 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -40,8 +40,6 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
vddio-supply: true
@@ -54,6 +52,7 @@ properties:
These devices also support an auxiliary i2c bus via an i2c-gate.
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
not:
properties:
@@ -67,7 +66,7 @@ allOf:
properties:
i2c-gate: false
-additionalProperties: false
+unevaluatedProperties: false
required:
- compatible
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
index 0203b83b8587..24416b59b782 100644
--- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -36,13 +36,14 @@ properties:
drive-open-drain:
type: boolean
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
index 5d4839f00898..fe1e02e5d7b3 100644
--- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@@ -35,6 +35,9 @@ properties:
- items:
- const: st,asm330lhhx
- const: st,lsm6dsr
+ - items:
+ - const: st,lsm6dstx
+ - const: st,lsm6dst
reg:
maxItems: 1
@@ -45,8 +48,6 @@ properties:
description:
Supports up to 2 interrupt lines via the INT1 and INT2 pins.
- spi-max-frequency: true
-
vdd-supply:
description: if defined provides VDD power to the sensor.
@@ -81,12 +82,15 @@ properties:
wakeup-source:
$ref: /schemas/types.yaml#/definitions/flag
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
new file mode 100644
index 000000000000..7de1b0e721ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTRF216A Ambient Light Sensor
+
+maintainers:
+ - Shreeya Patel <shreeya.patel@collabora.com>
+
+description:
+ Ambient light sensing with an i2c interface.
+
+properties:
+ compatible:
+ const: liteon,ltrf216a
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply:
+ description: Regulator that provides power to the sensor.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ light-sensor@53 {
+ compatible = "liteon,ltrf216a";
+ reg = <0x53>;
+ vdd-supply = <&vdd_regulator>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
index 567697d996ec..87e88f2a9908 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
@@ -25,14 +25,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
index 32e92bced81f..896fe0b5edcc 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
@@ -80,14 +80,15 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
index be2be4b556db..1f9fe15b4b3c 100644
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: All Sensors DLH series low voltage digital pressure sensors
maintainers:
- - Tomislav Denis <tomislav.denis@avl.com>
+ - Jonathan Cameron <jic23@kernel.org>
description: |
Bindings for the All Sensors DLH series pressure sensors.
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 49257f9251e8..72cd2c2d3f17 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: BMP085/BMP180/BMP280/BME280 pressure iio sensors
+title: BMP085/BMP180/BMP280/BME280/BMP380 pressure iio sensors
maintainers:
- Andreas Klinger <ak@it-klinger.de>
@@ -16,6 +16,7 @@ description: |
https://www.bosch-sensortec.com/bst/products/all_products/bmp180
https://www.bosch-sensortec.com/bst/products/all_products/bmp280
https://www.bosch-sensortec.com/bst/products/all_products/bme280
+ https://www.bosch-sensortec.com/bst/products/all_products/bmp380
properties:
compatible:
@@ -24,6 +25,7 @@ properties:
- bosch,bmp180
- bosch,bmp280
- bosch,bme280
+ - bosch,bmp380
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
index a88b3b14d6bd..dd2ae2bd1ad7 100644
--- a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
+++ b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
@@ -40,10 +40,6 @@ properties:
description:
Reset the sensorhub.
- spi-max-frequency: true
-
-additionalProperties: false
-
required:
- compatible
- reg
@@ -52,6 +48,11 @@ required:
- mcu-ap-gpios
- mcu-reset-gpios
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
index fcb2902683c7..250439b13152 100644
--- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
+++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
@@ -73,6 +73,7 @@ properties:
- description: STMicroelectronics Pressure Sensors
enum:
- st,lps001wp-press
+ - st,lps22df
- st,lps22hb-press
- st,lps22hh
- st,lps25h-press
@@ -141,6 +142,7 @@ allOf:
- st,lis2mdl
- st,lis3l02dq
- st,lis3lv02dl-accel
+ - st,lps22df
- st,lps22hb-press
- st,lps22hh
- st,lps25h-press
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
index 9969bac66aa1..0805ed7e2113 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
@@ -32,7 +32,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
spi-cpha: true
required:
@@ -40,6 +39,7 @@ required:
- reg
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -53,7 +53,7 @@ allOf:
properties:
spi-cpha: false
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
index 873b34766676..228a94165487 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
@@ -19,7 +19,6 @@ properties:
reg:
maxItems: 1
- spi-max-frequency: true
spi-cpha: true
thermocouple-type:
@@ -34,7 +33,10 @@ required:
- reg
- spi-cpha
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
index aafb33b16549..a2823ed6867b 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
@@ -25,7 +25,6 @@ properties:
enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection.
type: boolean
- spi-max-frequency: true
spi-cpha: true
required:
@@ -33,7 +32,10 @@ required:
- reg
- spi-cpha
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
index b547ddcd544a..4a55e7f25ae7 100644
--- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
@@ -35,6 +35,9 @@ properties:
maxItems: 1
description: Default is 0x3a, but can be reprogrammed.
+ vdd-supply:
+ description: provide VDD power to the sensor.
+
required:
- compatible
- reg
@@ -50,6 +53,7 @@ examples:
temp-sensor@3a {
compatible = "melexis,mlx90632";
reg = <0x3a>;
+ vdd-supply = <&ldo4_reg>;
};
};
...
diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
index b5a1109f2ee1..75e0a516e59a 100644
--- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
@@ -30,6 +30,7 @@ properties:
- mediatek,mt8173-efuse
- mediatek,mt8183-efuse
- mediatek,mt8186-efuse
+ - mediatek,mt8188-efuse
- mediatek,mt8192-efuse
- mediatek,mt8195-efuse
- mediatek,mt8516-efuse
diff --git a/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml
new file mode 100644
index 000000000000..f97c6beb4766
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/microchip,lan9662-otpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN9662 OTP Controller (OTPC)
+
+maintainers:
+ - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+ OTP controller drives a NVMEM memory where system specific data
+ (e.g. hardware configuration settings, chip identifiers) or
+ user specific data could be stored.
+
+allOf:
+ - $ref: nvmem.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: microchip,lan9668-otpc
+ - const: microchip,lan9662-otpc
+ - enum:
+ - microchip,lan9662-otpc
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ otpc: otp@e0021000 {
+ compatible = "microchip,lan9662-otpc";
+ reg = <0xe0021000 0x300>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index dede8892ee01..2eab2f46cb65 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -18,6 +18,7 @@ properties:
- enum:
- qcom,apq8064-qfprom
- qcom,apq8084-qfprom
+ - qcom,ipq8064-qfprom
- qcom,msm8974-qfprom
- qcom,msm8916-qfprom
- qcom,msm8996-qfprom
@@ -25,7 +26,9 @@ properties:
- qcom,qcs404-qfprom
- qcom,sc7180-qfprom
- qcom,sc7280-qfprom
+ - qcom,sdm630-qfprom
- qcom,sdm845-qfprom
+ - qcom,sm6115-qfprom
- const: qcom,qfprom
reg:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 1faea7d315c0..48b65069e6f2 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -779,6 +779,8 @@ patternProperties:
description: MELFAS Inc.
"^mellanox,.*":
description: Mellanox Technologies
+ "^memsensing,.*":
+ description: MEMSensing Microsystems Co., Ltd.
"^memsic,.*":
description: MEMSIC Inc.
"^menlo,.*":
diff --git a/Documentation/iio/bno055.rst b/Documentation/iio/bno055.rst
new file mode 100644
index 000000000000..9a489a79d8f5
--- /dev/null
+++ b/Documentation/iio/bno055.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================
+BNO055 driver
+==============================
+
+1. Overview
+===========
+
+This driver supports Bosch BNO055 IMUs (on both serial and I2C busses).
+
+Accelerometer, magnetometer and gyroscope measures are always provided.
+When "fusion_enable" sysfs attribute is set to 1, orientation (both Euler
+angles and quaternion), linear velocity and gravity vector are also
+provided, but some sensor settings (e.g. low pass filtering and range)
+became locked (the IMU firmware controls them).
+
+This driver supports also IIO buffers.
+
+2. Calibration
+==============
+
+The IMU continuously performs an autocalibration procedure if (and only if)
+operating in fusion mode. The magnetometer autocalibration can however be
+disabled writing 0 in the sysfs in_magn_calibration_fast_enable attribute.
+
+The driver provides access to autocalibration flags (i.e. you can known if
+the IMU has successfully autocalibrated) and to the calibration data blob.
+
+The user can save this blob in a firmware file (i.e. in /lib/firmware) that
+the driver looks for at probe time. If found, then the IMU is initialized
+with this calibration data. This saves the user from performing the
+calibration procedure every time (which consist of moving the IMU in
+various way).
+
+The driver looks for calibration data file using two different names: first
+a file whose name is suffixed with the IMU unique ID (exposed in sysfs as
+serial_number) is searched for; this is useful when there is more than one
+IMU instance. If this file is not found, then a "generic" calibration file
+is searched for (which can be used when only one IMU is present, without
+struggling with fancy names, that change on each device).
+
+Valid calibration file names would be e.g.
+ bno055-caldata-0e7c26a33541515120204a35342b04ff.dat
+ bno055-caldata.dat
+
+In non-fusion mode the IIO 'offset' attributes provide access to the
+offsets from calibration data (if any), so that the user can apply them to
+the accel, angvel and magn IIO attributes. In fusion mode they are not
+needed (the IMU firmware internally applies those corrections) and they
+read as zero.
diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst
index 58b7a4ebac51..1b7292c58cd0 100644
--- a/Documentation/iio/index.rst
+++ b/Documentation/iio/index.rst
@@ -10,3 +10,5 @@ Industrial I/O
iio_configfs
ep93xx_adc
+
+ bno055
diff --git a/Documentation/trace/coresight/coresight-cpu-debug.rst b/Documentation/trace/coresight/coresight-cpu-debug.rst
index 993dd294b81b..836b35532667 100644
--- a/Documentation/trace/coresight/coresight-cpu-debug.rst
+++ b/Documentation/trace/coresight/coresight-cpu-debug.rst
@@ -117,7 +117,8 @@ divide into below cases:
Device Tree Bindings
--------------------
-See Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt for details.
+See Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml for
+details.
How to use the module
diff --git a/Documentation/trace/coresight/coresight-etm4x-reference.rst b/Documentation/trace/coresight/coresight-etm4x-reference.rst
index fb7578fd9372..70e34b8c81c1 100644
--- a/Documentation/trace/coresight/coresight-etm4x-reference.rst
+++ b/Documentation/trace/coresight/coresight-etm4x-reference.rst
@@ -71,6 +71,20 @@ the ‘TRC’ prefix.
----
+:File: ``ts_source`` (ro)
+:Trace Registers: None.
+:Notes:
+ When FEAT_TRF is implemented, value of TRFCR_ELx.TS used for trace session. Otherwise -1
+ indicates an unknown time source. Check trcidr0.tssize to see if a global timestamp is
+ available.
+
+:Example:
+ ``$> cat ts_source``
+
+ ``$> 1``
+
+----
+
:File: ``addr_idx`` (rw)
:Trace Registers: None.
:Notes:
diff --git a/Documentation/trace/hisi-ptt.rst b/Documentation/trace/hisi-ptt.rst
new file mode 100644
index 000000000000..4f87d8e21065
--- /dev/null
+++ b/Documentation/trace/hisi-ptt.rst
@@ -0,0 +1,298 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+HiSilicon PCIe Tune and Trace device
+======================================
+
+Introduction
+============
+
+HiSilicon PCIe tune and trace device (PTT) is a PCIe Root Complex
+integrated Endpoint (RCiEP) device, providing the capability
+to dynamically monitor and tune the PCIe link's events (tune),
+and trace the TLP headers (trace). The two functions are independent,
+but is recommended to use them together to analyze and enhance the
+PCIe link's performance.
+
+On Kunpeng 930 SoC, the PCIe Root Complex is composed of several
+PCIe cores. Each PCIe core includes several Root Ports and a PTT
+RCiEP, like below. The PTT device is capable of tuning and
+tracing the links of the PCIe core.
+::
+
+ +--------------Core 0-------+
+ | | [ PTT ] |
+ | | [Root Port]---[Endpoint]
+ | | [Root Port]---[Endpoint]
+ | | [Root Port]---[Endpoint]
+ Root Complex |------Core 1-------+
+ | | [ PTT ] |
+ | | [Root Port]---[ Switch ]---[Endpoint]
+ | | [Root Port]---[Endpoint] `-[Endpoint]
+ | | [Root Port]---[Endpoint]
+ +---------------------------+
+
+The PTT device driver registers one PMU device for each PTT device.
+The name of each PTT device is composed of 'hisi_ptt' prefix with
+the id of the SICL and the Core where it locates. The Kunpeng 930
+SoC encapsulates multiple CPU dies (SCCL, Super CPU Cluster) and
+IO dies (SICL, Super I/O Cluster), where there's one PCIe Root
+Complex for each SICL.
+::
+
+ /sys/devices/hisi_ptt<sicl_id>_<core_id>
+
+Tune
+====
+
+PTT tune is designed for monitoring and adjusting PCIe link parameters (events).
+Currently we support events in 2 classes. The scope of the events
+covers the PCIe core to which the PTT device belongs.
+
+Each event is presented as a file under $(PTT PMU dir)/tune, and
+a simple open/read/write/close cycle will be used to tune the event.
+::
+
+ $ cd /sys/devices/hisi_ptt<sicl_id>_<core_id>/tune
+ $ ls
+ qos_tx_cpl qos_tx_np qos_tx_p
+ tx_path_rx_req_alloc_buf_level
+ tx_path_tx_req_alloc_buf_level
+ $ cat qos_tx_dp
+ 1
+ $ echo 2 > qos_tx_dp
+ $ cat qos_tx_dp
+ 2
+
+Current value (numerical value) of the event can be simply read
+from the file, and the desired value written to the file to tune.
+
+1. Tx Path QoS Control
+------------------------
+
+The following files are provided to tune the QoS of the tx path of
+the PCIe core.
+
+- qos_tx_cpl: weight of Tx completion TLPs
+- qos_tx_np: weight of Tx non-posted TLPs
+- qos_tx_p: weight of Tx posted TLPs
+
+The weight influences the proportion of certain packets on the PCIe link.
+For example, for the storage scenario, increase the proportion
+of the completion packets on the link to enhance the performance as
+more completions are consumed.
+
+The available tune data of these events is [0, 1, 2].
+Writing a negative value will return an error, and out of range
+values will be converted to 2. Note that the event value just
+indicates a probable level, but is not precise.
+
+2. Tx Path Buffer Control
+-------------------------
+
+Following files are provided to tune the buffer of tx path of the PCIe core.
+
+- rx_alloc_buf_level: watermark of Rx requested
+- tx_alloc_buf_level: watermark of Tx requested
+
+These events influence the watermark of the buffer allocated for each
+type. Rx means the inbound while Tx means outbound. The packets will
+be stored in the buffer first and then transmitted either when the
+watermark reached or when timed out. For a busy direction, you should
+increase the related buffer watermark to avoid frequently posting and
+thus enhance the performance. In most cases just keep the default value.
+
+The available tune data of above events is [0, 1, 2].
+Writing a negative value will return an error, and out of range
+values will be converted to 2. Note that the event value just
+indicates a probable level, but is not precise.
+
+Trace
+=====
+
+PTT trace is designed for dumping the TLP headers to the memory, which
+can be used to analyze the transactions and usage condition of the PCIe
+Link. You can choose to filter the traced headers by either Requester ID,
+or those downstream of a set of Root Ports on the same core of the PTT
+device. It's also supported to trace the headers of certain type and of
+certain direction.
+
+You can use the perf command `perf record` to set the parameters, start
+trace and get the data. It's also supported to decode the trace
+data with `perf report`. The control parameters for trace is inputted
+as event code for each events, which will be further illustrated later.
+An example usage is like
+::
+
+ $ perf record -e hisi_ptt0_2/filter=0x80001,type=1,direction=1,
+ format=1/ -- sleep 5
+
+This will trace the TLP headers downstream root port 0000:00:10.1 (event
+code for event 'filter' is 0x80001) with type of posted TLP requests,
+direction of inbound and traced data format of 8DW.
+
+1. Filter
+---------
+
+The TLP headers to trace can be filtered by the Root Ports or the Requester ID
+of the Endpoint, which are located on the same core of the PTT device. You can
+set the filter by specifying the `filter` parameter which is required to start
+the trace. The parameter value is 20 bit. Bit 19 indicates the filter type.
+1 for Root Port filter and 0 for Requester filter. Bit[15:0] indicates the
+filter value. The value for a Root Port is a mask of the core port id which is
+calculated from its PCI Slot ID as (slotid & 7) * 2. The value for a Requester
+is the Requester ID (Device ID of the PCIe function). Bit[18:16] is currently
+reserved for extension.
+
+For example, if the desired filter is Endpoint function 0000:01:00.1 the filter
+value will be 0x00101. If the desired filter is Root Port 0000:00:10.0 then
+then filter value is calculated as 0x80001.
+
+Note that multiple Root Ports can be specified at one time, but only one
+Endpoint function can be specified in one trace. Specifying both Root Port
+and function at the same time is not supported. Driver maintains a list of
+available filters and will check the invalid inputs.
+
+Currently the available filters are detected in driver's probe. If the supported
+devices are removed/added after probe, you may need to reload the driver to update
+the filters.
+
+2. Type
+-------
+
+You can trace the TLP headers of certain types by specifying the `type`
+parameter, which is required to start the trace. The parameter value is
+8 bit. Current supported types and related values are shown below:
+
+- 8'b00000001: posted requests (P)
+- 8'b00000010: non-posted requests (NP)
+- 8'b00000100: completions (CPL)
+
+You can specify multiple types when tracing inbound TLP headers, but can only
+specify one when tracing outbound TLP headers.
+
+3. Direction
+------------
+
+You can trace the TLP headers from certain direction, which is relative
+to the Root Port or the PCIe core, by specifying the `direction` parameter.
+This is optional and the default parameter is inbound. The parameter value
+is 4 bit. When the desired format is 4DW, directions and related values
+supported are shown below:
+
+- 4'b0000: inbound TLPs (P, NP, CPL)
+- 4'b0001: outbound TLPs (P, NP, CPL)
+- 4'b0010: outbound TLPs (P, NP, CPL) and inbound TLPs (P, NP, CPL B)
+- 4'b0011: outbound TLPs (P, NP, CPL) and inbound TLPs (CPL A)
+
+When the desired format is 8DW, directions and related values supported are
+shown below:
+
+- 4'b0000: reserved
+- 4'b0001: outbound TLPs (P, NP, CPL)
+- 4'b0010: inbound TLPs (P, NP, CPL B)
+- 4'b0011: inbound TLPs (CPL A)
+
+Inbound completions are classified into two types:
+
+- completion A (CPL A): completion of CHI/DMA/Native non-posted requests, except for CPL B
+- completion B (CPL B): completion of DMA remote2local and P2P non-posted requests
+
+4. Format
+--------------
+
+You can change the format of the traced TLP headers by specifying the
+`format` parameter. The default format is 4DW. The parameter value is 4 bit.
+Current supported formats and related values are shown below:
+
+- 4'b0000: 4DW length per TLP header
+- 4'b0001: 8DW length per TLP header
+
+The traced TLP header format is different from the PCIe standard.
+
+When using the 8DW data format, the entire TLP header is logged
+(Header DW0-3 shown below). For example, the TLP header for Memory
+Reads with 64-bit addresses is shown in PCIe r5.0, Figure 2-17;
+the header for Configuration Requests is shown in Figure 2.20, etc.
+
+In addition, 8DW trace buffer entries contain a timestamp and
+possibly a prefix for a PASID TLP prefix (see Figure 6-20, PCIe r5.0).
+Otherwise this field will be all 0.
+
+The bit[31:11] of DW0 is always 0x1fffff, which can be
+used to distinguish the data format. 8DW format is like
+::
+
+ bits [ 31:11 ][ 10:0 ]
+ |---------------------------------------|-------------------|
+ DW0 [ 0x1fffff ][ Reserved (0x7ff) ]
+ DW1 [ Prefix ]
+ DW2 [ Header DW0 ]
+ DW3 [ Header DW1 ]
+ DW4 [ Header DW2 ]
+ DW5 [ Header DW3 ]
+ DW6 [ Reserved (0x0) ]
+ DW7 [ Time ]
+
+When using the 4DW data format, DW0 of the trace buffer entry
+contains selected fields of DW0 of the TLP, together with a
+timestamp. DW1-DW3 of the trace buffer entry contain DW1-DW3
+directly from the TLP header.
+
+4DW format is like
+::
+
+ bits [31:30] [ 29:25 ][24][23][22][21][ 20:11 ][ 10:0 ]
+ |-----|---------|---|---|---|---|-------------|-------------|
+ DW0 [ Fmt ][ Type ][T9][T8][TH][SO][ Length ][ Time ]
+ DW1 [ Header DW1 ]
+ DW2 [ Header DW2 ]
+ DW3 [ Header DW3 ]
+
+5. Memory Management
+--------------------
+
+The traced TLP headers will be written to the memory allocated
+by the driver. The hardware accepts 4 DMA address with same size,
+and writes the buffer sequentially like below. If DMA addr 3 is
+finished and the trace is still on, it will return to addr 0.
+::
+
+ +->[DMA addr 0]->[DMA addr 1]->[DMA addr 2]->[DMA addr 3]-+
+ +---------------------------------------------------------+
+
+Driver will allocate each DMA buffer of 4MiB. The finished buffer
+will be copied to the perf AUX buffer allocated by the perf core.
+Once the AUX buffer is full while the trace is still on, driver
+will commit the AUX buffer first and then apply for a new one with
+the same size. The size of AUX buffer is default to 16MiB. User can
+adjust the size by specifying the `-m` parameter of the perf command.
+
+6. Decoding
+-----------
+
+You can decode the traced data with `perf report -D` command (currently
+only support to dump the raw trace data). The traced data will be decoded
+according to the format described previously (take 8DW as an example):
+::
+
+ [...perf headers and other information]
+ . ... HISI PTT data: size 4194304 bytes
+ . 00000000: 00 00 00 00 Prefix
+ . 00000004: 01 00 00 60 Header DW0
+ . 00000008: 0f 1e 00 01 Header DW1
+ . 0000000c: 04 00 00 00 Header DW2
+ . 00000010: 40 00 81 02 Header DW3
+ . 00000014: 33 c0 04 00 Time
+ . 00000020: 00 00 00 00 Prefix
+ . 00000024: 01 00 00 60 Header DW0
+ . 00000028: 0f 1e 00 01 Header DW1
+ . 0000002c: 04 00 00 00 Header DW2
+ . 00000030: 40 00 81 02 Header DW3
+ . 00000034: 02 00 00 00 Time
+ . 00000040: 00 00 00 00 Prefix
+ . 00000044: 01 00 00 60 Header DW0
+ . 00000048: 0f 1e 00 01 Header DW1
+ . 0000004c: 04 00 00 00 Header DW2
+ . 00000050: 40 00 81 02 Header DW3
+ [...]
diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst
index 2d73e8697523..ea25a9220f92 100644
--- a/Documentation/trace/index.rst
+++ b/Documentation/trace/index.rst
@@ -33,3 +33,4 @@ Linux Tracing Technologies
coresight/index
user_events
rv/index
+ hisi-ptt
diff --git a/MAINTAINERS b/MAINTAINERS
index f37a0360c76c..2bfeb7462bc3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -618,7 +618,7 @@ ADXL367 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
M: Cosmin Tanislav <cosmin.tanislav@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
-W: http://ez.analog.com/community/linux-device-drivers
+W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
F: drivers/iio/accel/adxl367*
@@ -759,14 +759,6 @@ L: Dell.Client.Kernel@dell.com
S: Maintained
F: drivers/platform/x86/dell/alienware-wmi.c
-ALL SENSORS DLH SERIES PRESSURE SENSORS DRIVER
-M: Tomislav Denis <tomislav.denis@avl.com>
-L: linux-iio@vger.kernel.org
-S: Maintained
-W: http://www.allsensors.com/
-F: Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
-F: drivers/iio/pressure/dlhl60d.c
-
ALLEGRO DVT VIDEO IP CORE DRIVER
M: Michael Tretter <m.tretter@pengutronix.de>
R: Pengutronix Kernel Team <kernel@pengutronix.de>
@@ -1178,7 +1170,7 @@ ANALOG DEVICES INC AD74413R DRIVER
M: Cosmin Tanislav <cosmin.tanislav@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
-W: http://ez.analog.com/community/linux-device-drivers
+W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
F: drivers/iio/addac/ad74413r.c
F: include/dt-bindings/iio/addac/adi,ad74413r.h
@@ -1353,7 +1345,8 @@ W: https://ez.analog.com/linux-software-drivers
F: Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523
F: Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350
F: Documentation/devicetree/bindings/iio/*/adi,*
-F: Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
+F: Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+F: Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
F: drivers/iio/*/ad*
F: drivers/iio/adc/ltc249*
F: drivers/iio/amplifiers/hmc425a.c
@@ -1417,7 +1410,7 @@ APEX EMBEDDED SYSTEMS STX104 IIO DRIVER
M: William Breathitt Gray <william.gray@linaro.org>
L: linux-iio@vger.kernel.org
S: Maintained
-F: drivers/iio/adc/stx104.c
+F: drivers/iio/addac/stx104.c
APM DRIVER
M: Jiri Kosina <jikos@kernel.org>
@@ -5323,7 +5316,7 @@ COUNTER SUBSYSTEM
M: William Breathitt Gray <william.gray@linaro.org>
L: linux-iio@vger.kernel.org
S: Maintained
-T: git https://git.linaro.org/people/william.gray/counter.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter.git
F: Documentation/ABI/testing/sysfs-bus-counter
F: Documentation/driver-api/generic-counter.rst
F: drivers/counter/
@@ -8915,6 +8908,7 @@ T: git https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux.git
F: Documentation/ABI/testing/debugfs-driver-habanalabs
F: Documentation/ABI/testing/sysfs-driver-habanalabs
F: drivers/misc/habanalabs/
+F: include/trace/events/habanalabs.h
F: include/uapi/misc/habanalabs.h
HACKRF MEDIA DRIVER
@@ -9230,6 +9224,14 @@ S: Supported
F: Documentation/admin-guide/perf/hns3-pmu.rst
F: drivers/perf/hisilicon/hns3_pmu.c
+HISILICON PTT DRIVER
+M: Yicong Yang <yangyicong@hisilicon.com>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: Documentation/ABI/testing/sysfs-devices-hisi_ptt
+F: Documentation/trace/hisi-ptt.rst
+F: drivers/hwtracing/ptt/
+
HISILICON QM DRIVER
M: Weili Qian <qianweili@huawei.com>
M: Zhou Wang <wangzhou1@hisilicon.com>
@@ -11680,6 +11682,7 @@ F: Documentation/process/license-rules.rst
F: LICENSES/
F: scripts/spdxcheck-test.sh
F: scripts/spdxcheck.py
+F: scripts/spdxexclude
LINEAR RANGES HELPERS
M: Mark Brown <broonie@kernel.org>
@@ -11978,7 +11981,7 @@ LTC2688 IIO DAC DRIVER
M: Nuno Sá <nuno.sa@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
-W: http://ez.analog.com/community/linux-device-drivers
+W: https://ez.analog.com/linux-software-drivers
F: Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
F: Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
F: drivers/iio/dac/ltc2688.c
@@ -12395,6 +12398,14 @@ S: Maintained
F: Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml
F: drivers/iio/proximity/mb1232.c
+MAXIM MAX11205 DRIVER
+M: Ramona Bolboaca <ramona.bolboaca@analog.com>
+L: linux-iio@vger.kernel.org
+S: Supported
+W: https://ez.analog.com/linux-software-drivers
+F: Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
+F: drivers/iio/adc/max11205.c
+
MAXIM MAX17040 FAMILY FUEL GAUGE DRIVERS
R: Iskren Chernev <iskren.chernev@gmail.com>
R: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
@@ -13237,6 +13248,13 @@ F: drivers/mtd/
F: include/linux/mtd/
F: include/uapi/mtd/
+MEMSENSING MICROSYSTEMS MSA311 DRIVER
+M: Dmitry Rokosov <ddrokosov@sberdevices.ru>
+L: linux-iio@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
+F: drivers/iio/accel/msa311.c
+
MEN A21 WATCHDOG DRIVER
M: Johannes Thumshirn <morbidrsa@gmail.com>
L: linux-watchdog@vger.kernel.org
@@ -13458,7 +13476,7 @@ MICROCHIP MCP3911 ADC DRIVER
M: Marcus Folkesson <marcus.folkesson@gmail.com>
M: Kent Gustavsson <kent@minoris.se>
L: linux-iio@vger.kernel.org
-S: Supported
+S: Maintained
F: Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
F: drivers/iio/adc/mcp3911.c
@@ -13474,6 +13492,14 @@ S: Supported
F: Documentation/devicetree/bindings/mtd/atmel-nand.txt
F: drivers/mtd/nand/raw/atmel/*
+MICROCHIP PCI1XXXX GP DRIVER
+M: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
+L: linux-gpio@vger.kernel.org
+S: Supported
+F: drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c
+F: drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.h
+F: drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c
+
MICROCHIP OTPC DRIVER
M: Claudiu Beznea <claudiu.beznea@microchip.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -20385,13 +20411,6 @@ M: Robert Richter <rric@kernel.org>
S: Odd Fixes
F: drivers/gpio/gpio-thunderx.c
-TI ADS131E0X ADC SERIES DRIVER
-M: Tomislav Denis <tomislav.denis@avl.com>
-L: linux-iio@vger.kernel.org
-S: Maintained
-F: Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
-F: drivers/iio/adc/ti-ads131e08.c
-
TI AM437X VPFE DRIVER
M: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
L: linux-media@vger.kernel.org
@@ -20462,6 +20481,15 @@ F: drivers/media/platform/ti/davinci/
F: drivers/staging/media/deprecated/vpfe_capture/
F: include/media/davinci/
+TI ENHANCED CAPTURE (eCAP) DRIVER
+M: Vignesh Raghavendra <vigneshr@ti.com>
+R: Julien Panis <jpanis@baylibre.com>
+L: linux-iio@vger.kernel.org
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
+F: drivers/counter/ti-ecap-capture.c
+
TI ENHANCED QUADRATURE ENCODER PULSE (eQEP) DRIVER
R: David Lechner <david@lechnology.com>
L: linux-iio@vger.kernel.org
@@ -20880,6 +20908,7 @@ U-BOOT ENVIRONMENT VARIABLES
M: Rafał Miłecki <rafal@milecki.pl>
S: Maintained
F: Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
+F: drivers/nvmem/u-boot-env.c
UACCE ACCELERATOR FRAMEWORK
M: Zhangfei Gao <zhangfei.gao@linaro.org>
@@ -21827,7 +21856,7 @@ VMWARE BALLOON DRIVER
M: Nadav Amit <namit@vmware.com>
R: VMware PV-Drivers Reviewers <pv-drivers@vmware.com>
L: linux-kernel@vger.kernel.org
-S: Maintained
+S: Supported
F: drivers/misc/vmw_balloon.c
VMWARE HYPERVISOR INTERFACE
@@ -21846,14 +21875,14 @@ M: Bryan Tan <bryantan@vmware.com>
M: Vishnu Dasa <vdasa@vmware.com>
R: VMware PV-Drivers Reviewers <pv-drivers@vmware.com>
L: linux-rdma@vger.kernel.org
-S: Maintained
+S: Supported
F: drivers/infiniband/hw/vmw_pvrdma/
-VMware PVSCSI driver
+VMWARE PVSCSI DRIVER
M: Vishal Bhakta <vbhakta@vmware.com>
R: VMware PV-Drivers Reviewers <pv-drivers@vmware.com>
L: linux-scsi@vger.kernel.org
-S: Maintained
+S: Supported
F: drivers/scsi/vmw_pvscsi.c
F: drivers/scsi/vmw_pvscsi.h
@@ -21866,19 +21895,19 @@ F: drivers/ptp/ptp_vmw.c
VMWARE VMCI DRIVER
M: Bryan Tan <bryantan@vmware.com>
-M: Rajesh Jalisatgi <rjalisatgi@vmware.com>
M: Vishnu Dasa <vdasa@vmware.com>
R: VMware PV-Drivers Reviewers <pv-drivers@vmware.com>
L: linux-kernel@vger.kernel.org
-S: Maintained
+S: Supported
F: drivers/misc/vmw_vmci/
+F: include/linux/vmw_vmci*
VMWARE VMMOUSE SUBDRIVER
M: Zack Rusin <zackr@vmware.com>
R: VMware Graphics Reviewers <linux-graphics-maintainer@vmware.com>
R: VMware PV-Drivers Reviewers <pv-drivers@vmware.com>
L: linux-input@vger.kernel.org
-S: Maintained
+S: Supported
F: drivers/input/mouse/vmmouse.c
F: drivers/input/mouse/vmmouse.h
@@ -21886,9 +21915,17 @@ VMWARE VMXNET3 ETHERNET DRIVER
M: Ronak Doshi <doshir@vmware.com>
R: VMware PV-Drivers Reviewers <pv-drivers@vmware.com>
L: netdev@vger.kernel.org
-S: Maintained
+S: Supported
F: drivers/net/vmxnet3/
+VMWARE VSOCK VMCI TRANSPORT DRIVER
+M: Bryan Tan <bryantan@vmware.com>
+M: Vishnu Dasa <vdasa@vmware.com>
+R: VMware PV-Drivers Reviewers <pv-drivers@vmware.com>
+L: linux-kernel@vger.kernel.org
+S: Supported
+F: net/vmw_vsock/vmci_transport*
+
VOCORE VOCORE2 BOARD
M: Harvey Hunt <harveyhuntnexus@gmail.com>
L: linux-mips@vger.kernel.org
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 23003a43ffe9..54a6dc0aa5a4 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -1189,11 +1189,11 @@ CONFIG_TI_PIPE3=y
CONFIG_TWL4030_USB=m
CONFIG_RAS=y
CONFIG_NVMEM_IMX_OCOTP=y
-CONFIG_QCOM_QFPROM=y
-CONFIG_ROCKCHIP_EFUSE=m
+CONFIG_NVMEM_QCOM_QFPROM=y
+CONFIG_NVMEM_ROCKCHIP_EFUSE=m
CONFIG_NVMEM_SUNXI_SID=y
CONFIG_NVMEM_VF610_OCOTP=y
-CONFIG_MESON_MX_EFUSE=m
+CONFIG_NVMEM_MESON_MX_EFUSE=m
CONFIG_NVMEM_RMEM=m
CONFIG_FSI=m
CONFIG_FSI_MASTER_GPIO=m
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 0afa62b92de7..7d8b6884fd00 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -283,7 +283,7 @@ CONFIG_PHY_QCOM_QMP=y
CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
CONFIG_PHY_QCOM_USB_HSIC=y
-CONFIG_QCOM_QFPROM=y
+CONFIG_NVMEM_QCOM_QFPROM=y
CONFIG_INTERCONNECT=y
CONFIG_INTERCONNECT_QCOM=y
CONFIG_INTERCONNECT_QCOM_MSM8974=m
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 7b49c80286be..d31545cc145b 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -1268,12 +1268,12 @@ CONFIG_QCOM_L3_PMU=y
CONFIG_HISI_PMU=y
CONFIG_NVMEM_IMX_OCOTP=y
CONFIG_NVMEM_IMX_OCOTP_SCU=y
-CONFIG_MTK_EFUSE=y
-CONFIG_QCOM_QFPROM=y
-CONFIG_ROCKCHIP_EFUSE=y
+CONFIG_NVMEM_MTK_EFUSE=y
+CONFIG_NVMEM_QCOM_QFPROM=y
+CONFIG_NVMEM_ROCKCHIP_EFUSE=y
CONFIG_NVMEM_SUNXI_SID=y
-CONFIG_UNIPHIER_EFUSE=y
-CONFIG_MESON_EFUSE=m
+CONFIG_NVMEM_UNIPHIER_EFUSE=y
+CONFIG_NVMEM_MESON_EFUSE=m
CONFIG_NVMEM_RMEM=m
CONFIG_NVMEM_LAYERSCAPE_SFP=m
CONFIG_FPGA=y
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index debc1c0b2b7f..7d301700d1a9 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -865,6 +865,7 @@
#define SYS_MPIDR_SAFE_VAL (BIT(31))
#define TRFCR_ELx_TS_SHIFT 5
+#define TRFCR_ELx_TS_MASK ((0x3UL) << TRFCR_ELx_TS_SHIFT)
#define TRFCR_ELx_TS_VIRTUAL ((0x1UL) << TRFCR_ELx_TS_SHIFT)
#define TRFCR_ELx_TS_GUEST_PHYSICAL ((0x2UL) << TRFCR_ELx_TS_SHIFT)
#define TRFCR_ELx_TS_PHYSICAL ((0x3UL) << TRFCR_ELx_TS_SHIFT)
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index cc69b215854e..e1b49f77414a 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -143,7 +143,7 @@ CONFIG_MEMORY=y
CONFIG_JZ4780_NEMC=y
CONFIG_PWM=y
CONFIG_PWM_JZ4740=m
-CONFIG_JZ4780_EFUSE=y
+CONFIG_NVMEM_JZ4780_EFUSE=y
CONFIG_JZ4770_PHY=y
CONFIG_EXT4_FS=y
# CONFIG_DNOTIFY is not set
diff --git a/drivers/Makefile b/drivers/Makefile
index 057857258bfd..bdf1c66141c9 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -175,6 +175,7 @@ obj-$(CONFIG_USB4) += thunderbolt/
obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/
obj-y += hwtracing/intel_th/
obj-$(CONFIG_STM) += hwtracing/stm/
+obj-$(CONFIG_HISI_PTT) += hwtracing/ptt/
obj-y += android/
obj-$(CONFIG_NVMEM) += nvmem/
obj-$(CONFIG_FPGA) += fpga/
diff --git a/drivers/accessibility/speakup/speakup_dummy.c b/drivers/accessibility/speakup/speakup_dummy.c
index 34f11cd47073..56419dbb28d3 100644
--- a/drivers/accessibility/speakup/speakup_dummy.c
+++ b/drivers/accessibility/speakup/speakup_dummy.c
@@ -27,6 +27,7 @@ static struct var_t vars[] = {
{ INFLECTION, .u.n = {"INFLECTION %d\n", 8, 0, 16, 0, 0, NULL } },
{ VOL, .u.n = {"VOL %d\n", 8, 0, 16, 0, 0, NULL } },
{ TONE, .u.n = {"TONE %d\n", 8, 0, 16, 0, 0, NULL } },
+ { PUNCT, .u.n = {"PUNCT %d\n", 0, 0, 3, 0, 0, NULL } },
{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -42,6 +43,8 @@ static struct kobj_attribute pitch_attribute =
__ATTR(pitch, 0644, spk_var_show, spk_var_store);
static struct kobj_attribute inflection_attribute =
__ATTR(inflection, 0644, spk_var_show, spk_var_store);
+static struct kobj_attribute punct_attribute =
+ __ATTR(punct, 0644, spk_var_show, spk_var_store);
static struct kobj_attribute rate_attribute =
__ATTR(rate, 0644, spk_var_show, spk_var_store);
static struct kobj_attribute tone_attribute =
@@ -69,6 +72,7 @@ static struct attribute *synth_attrs[] = {
&caps_stop_attribute.attr,
&pitch_attribute.attr,
&inflection_attribute.attr,
+ &punct_attribute.attr,
&rate_attribute.attr,
&tone_attribute.attr,
&vol_attribute.attr,
diff --git a/drivers/accessibility/speakup/speakup_soft.c b/drivers/accessibility/speakup/speakup_soft.c
index 99f1d4ac426a..28c8f60370cf 100644
--- a/drivers/accessibility/speakup/speakup_soft.c
+++ b/drivers/accessibility/speakup/speakup_soft.c
@@ -26,6 +26,7 @@
static int softsynth_probe(struct spk_synth *synth);
static void softsynth_release(struct spk_synth *synth);
static int softsynth_is_alive(struct spk_synth *synth);
+static int softsynth_adjust(struct spk_synth *synth, struct st_var_header *var);
static unsigned char get_index(struct spk_synth *synth);
static struct miscdevice synth_device, synthu_device;
@@ -33,6 +34,9 @@ static int init_pos;
static int misc_registered;
static struct var_t vars[] = {
+ /* DIRECT is put first so that module_param_named can access it easily */
+ { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
+
{ CAPS_START, .u.s = {"\x01+3p" } },
{ CAPS_STOP, .u.s = {"\x01-3p" } },
{ PAUSE, .u.n = {"\x01P" } },
@@ -41,10 +45,9 @@ static struct var_t vars[] = {
{ INFLECTION, .u.n = {"\x01%dr", 5, 0, 9, 0, 0, NULL } },
{ VOL, .u.n = {"\x01%dv", 5, 0, 9, 0, 0, NULL } },
{ TONE, .u.n = {"\x01%dx", 1, 0, 2, 0, 0, NULL } },
- { PUNCT, .u.n = {"\x01%db", 0, 0, 2, 0, 0, NULL } },
+ { PUNCT, .u.n = {"\x01%db", 0, 0, 3, 0, 0, NULL } },
{ VOICE, .u.n = {"\x01%do", 0, 0, 7, 0, 0, NULL } },
{ FREQUENCY, .u.n = {"\x01%df", 5, 0, 9, 0, 0, NULL } },
- { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -133,7 +136,7 @@ static struct spk_synth synth_soft = {
.catch_up = NULL,
.flush = NULL,
.is_alive = softsynth_is_alive,
- .synth_adjust = NULL,
+ .synth_adjust = softsynth_adjust,
.read_buff_add = NULL,
.get_index = get_index,
.indexing = {
@@ -426,9 +429,32 @@ static int softsynth_is_alive(struct spk_synth *synth)
return 0;
}
+static int softsynth_adjust(struct spk_synth *synth, struct st_var_header *var)
+{
+ struct st_var_header *punc_level_var;
+ struct var_t *var_data;
+
+ if (var->var_id != PUNC_LEVEL)
+ return 0;
+
+ /* We want to set the the speech synthesis punctuation level
+ * accordingly, so it properly tunes speaking A_PUNC characters */
+ var_data = var->data;
+ if (!var_data)
+ return 0;
+ punc_level_var = spk_get_var_header(PUNCT);
+ if (!punc_level_var)
+ return 0;
+ spk_set_num_var(var_data->u.n.value, punc_level_var, E_SET);
+
+ return 1;
+}
+
module_param_named(start, synth_soft.startup, short, 0444);
+module_param_named(direct, vars[0].u.n.default_val, int, 0444);
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
+MODULE_PARM_DESC(direct, "Set the direct variable on load.");
module_spk_synth(synth_soft);
diff --git a/drivers/accessibility/speakup/spk_types.h b/drivers/accessibility/speakup/spk_types.h
index 6a96ad94bc3f..3a14d39bf896 100644
--- a/drivers/accessibility/speakup/spk_types.h
+++ b/drivers/accessibility/speakup/spk_types.h
@@ -195,7 +195,7 @@ struct spk_synth {
void (*catch_up)(struct spk_synth *synth);
void (*flush)(struct spk_synth *synth);
int (*is_alive)(struct spk_synth *synth);
- int (*synth_adjust)(struct st_var_header *var);
+ int (*synth_adjust)(struct spk_synth *synth, struct st_var_header *var);
void (*read_buff_add)(u_char c);
unsigned char (*get_index)(struct spk_synth *synth);
struct synth_indexing indexing;
diff --git a/drivers/accessibility/speakup/varhandlers.c b/drivers/accessibility/speakup/varhandlers.c
index 067c0da97dcb..e1c9f42e39f0 100644
--- a/drivers/accessibility/speakup/varhandlers.c
+++ b/drivers/accessibility/speakup/varhandlers.c
@@ -138,6 +138,7 @@ struct st_var_header *spk_get_var_header(enum var_id_t var_id)
return NULL;
return p_header;
}
+EXPORT_SYMBOL_GPL(spk_get_var_header);
struct st_var_header *spk_var_header_by_name(const char *name)
{
@@ -221,15 +222,17 @@ int spk_set_num_var(int input, struct st_var_header *var, int how)
*p_val = val;
if (var->var_id == PUNC_LEVEL) {
spk_punc_mask = spk_punc_masks[val];
- return 0;
}
if (var_data->u.n.multiplier != 0)
val *= var_data->u.n.multiplier;
val += var_data->u.n.offset;
- if (var->var_id < FIRST_SYNTH_VAR || !synth)
+
+ if (!synth)
+ return 0;
+ if (synth->synth_adjust && synth->synth_adjust(synth, var))
+ return 0;
+ if (var->var_id < FIRST_SYNTH_VAR)
return 0;
- if (synth->synth_adjust)
- return synth->synth_adjust(var);
if (!var_data->u.n.synth_fmt)
return 0;
@@ -245,6 +248,7 @@ int spk_set_num_var(int input, struct st_var_header *var, int how)
synth_printf("%s", cp);
return 0;
}
+EXPORT_SYMBOL_GPL(spk_set_num_var);
int spk_set_string_var(const char *page, struct st_var_header *var, int len)
{
diff --git a/drivers/android/binder_alloc.c b/drivers/android/binder_alloc.c
index 9b1778c00610..1c39cfce32fa 100644
--- a/drivers/android/binder_alloc.c
+++ b/drivers/android/binder_alloc.c
@@ -208,8 +208,8 @@ static int binder_update_page_range(struct binder_alloc *alloc, int allocate,
}
}
- if (need_mm && mmget_not_zero(alloc->vma_vm_mm))
- mm = alloc->vma_vm_mm;
+ if (need_mm && mmget_not_zero(alloc->mm))
+ mm = alloc->mm;
if (mm) {
mmap_read_lock(mm);
@@ -309,34 +309,13 @@ err_no_vma:
return vma ? -ENOMEM : -ESRCH;
}
-
-static inline void binder_alloc_set_vma(struct binder_alloc *alloc,
- struct vm_area_struct *vma)
-{
- unsigned long vm_start = 0;
-
- /*
- * Allow clearing the vma with holding just the read lock to allow
- * munmapping downgrade of the write lock before freeing and closing the
- * file using binder_alloc_vma_close().
- */
- if (vma) {
- vm_start = vma->vm_start;
- mmap_assert_write_locked(alloc->vma_vm_mm);
- } else {
- mmap_assert_locked(alloc->vma_vm_mm);
- }
-
- alloc->vma_addr = vm_start;
-}
-
static inline struct vm_area_struct *binder_alloc_get_vma(
struct binder_alloc *alloc)
{
struct vm_area_struct *vma = NULL;
if (alloc->vma_addr)
- vma = vma_lookup(alloc->vma_vm_mm, alloc->vma_addr);
+ vma = vma_lookup(alloc->mm, alloc->vma_addr);
return vma;
}
@@ -401,15 +380,15 @@ static struct binder_buffer *binder_alloc_new_buf_locked(
size_t size, data_offsets_size;
int ret;
- mmap_read_lock(alloc->vma_vm_mm);
+ mmap_read_lock(alloc->mm);
if (!binder_alloc_get_vma(alloc)) {
- mmap_read_unlock(alloc->vma_vm_mm);
+ mmap_read_unlock(alloc->mm);
binder_alloc_debug(BINDER_DEBUG_USER_ERROR,
"%d: binder_alloc_buf, no vma\n",
alloc->pid);
return ERR_PTR(-ESRCH);
}
- mmap_read_unlock(alloc->vma_vm_mm);
+ mmap_read_unlock(alloc->mm);
data_offsets_size = ALIGN(data_size, sizeof(void *)) +
ALIGN(offsets_size, sizeof(void *));
@@ -793,7 +772,7 @@ int binder_alloc_mmap_handler(struct binder_alloc *alloc,
buffer->free = 1;
binder_insert_free_buffer(alloc, buffer);
alloc->free_async_space = alloc->buffer_size / 2;
- binder_alloc_set_vma(alloc, vma);
+ alloc->vma_addr = vma->vm_start;
return 0;
@@ -823,7 +802,7 @@ void binder_alloc_deferred_release(struct binder_alloc *alloc)
buffers = 0;
mutex_lock(&alloc->mutex);
BUG_ON(alloc->vma_addr &&
- vma_lookup(alloc->vma_vm_mm, alloc->vma_addr));
+ vma_lookup(alloc->mm, alloc->vma_addr));
while ((n = rb_first(&alloc->allocated_buffers))) {
buffer = rb_entry(n, struct binder_buffer, rb_node);
@@ -873,8 +852,8 @@ void binder_alloc_deferred_release(struct binder_alloc *alloc)
kfree(alloc->pages);
}
mutex_unlock(&alloc->mutex);
- if (alloc->vma_vm_mm)
- mmdrop(alloc->vma_vm_mm);
+ if (alloc->mm)
+ mmdrop(alloc->mm);
binder_alloc_debug(BINDER_DEBUG_OPEN_CLOSE,
"%s: %d buffers %d, pages %d\n",
@@ -931,13 +910,13 @@ void binder_alloc_print_pages(struct seq_file *m,
* read inconsistent state.
*/
- mmap_read_lock(alloc->vma_vm_mm);
+ mmap_read_lock(alloc->mm);
if (binder_alloc_get_vma(alloc) == NULL) {
- mmap_read_unlock(alloc->vma_vm_mm);
+ mmap_read_unlock(alloc->mm);
goto uninitialized;
}
- mmap_read_unlock(alloc->vma_vm_mm);
+ mmap_read_unlock(alloc->mm);
for (i = 0; i < alloc->buffer_size / PAGE_SIZE; i++) {
page = &alloc->pages[i];
if (!page->page_ptr)
@@ -983,7 +962,7 @@ int binder_alloc_get_allocated_count(struct binder_alloc *alloc)
*/
void binder_alloc_vma_close(struct binder_alloc *alloc)
{
- binder_alloc_set_vma(alloc, NULL);
+ alloc->vma_addr = 0;
}
/**
@@ -1020,7 +999,7 @@ enum lru_status binder_alloc_free_page(struct list_head *item,
index = page - alloc->pages;
page_addr = (uintptr_t)alloc->buffer + index * PAGE_SIZE;
- mm = alloc->vma_vm_mm;
+ mm = alloc->mm;
if (!mmget_not_zero(mm))
goto err_mmget;
if (!mmap_read_trylock(mm))
@@ -1089,8 +1068,8 @@ static struct shrinker binder_shrinker = {
void binder_alloc_init(struct binder_alloc *alloc)
{
alloc->pid = current->group_leader->pid;
- alloc->vma_vm_mm = current->mm;
- mmgrab(alloc->vma_vm_mm);
+ alloc->mm = current->mm;
+ mmgrab(alloc->mm);
mutex_init(&alloc->mutex);
INIT_LIST_HEAD(&alloc->buffers);
}
diff --git a/drivers/android/binder_alloc.h b/drivers/android/binder_alloc.h
index 1e4fd37af5e0..0f811ac4bcff 100644
--- a/drivers/android/binder_alloc.h
+++ b/drivers/android/binder_alloc.h
@@ -74,11 +74,10 @@ struct binder_lru_page {
/**
* struct binder_alloc - per-binder proc state for binder allocator
- * @vma: vm_area_struct passed to mmap_handler
- * (invarient after mmap)
- * @tsk: tid for task that called init for this proc
- * (invariant after init)
- * @vma_vm_mm: copy of vma->vm_mm (invarient after mmap)
+ * @mutex: protects binder_alloc fields
+ * @vma_addr: vm_area_struct->vm_start passed to mmap_handler
+ * (invariant after mmap)
+ * @mm: copy of task->mm (invariant after open)
* @buffer: base of per-proc address space mapped via mmap
* @buffers: list of all buffers for this proc
* @free_buffers: rb tree of buffers available for allocation
@@ -101,7 +100,7 @@ struct binder_lru_page {
struct binder_alloc {
struct mutex mutex;
unsigned long vma_addr;
- struct mm_struct *vma_vm_mm;
+ struct mm_struct *mm;
void __user *buffer;
struct list_head buffers;
struct rb_root free_buffers;
@@ -109,7 +108,6 @@ struct binder_alloc {
size_t free_async_space;
struct binder_lru_page *pages;
size_t buffer_size;
- uint32_t buffer_free;
int pid;
size_t pages_high;
bool oneway_spam_detected;
diff --git a/drivers/android/binderfs.c b/drivers/android/binderfs.c
index 588d753a7a19..09b2ce7e4c34 100644
--- a/drivers/android/binderfs.c
+++ b/drivers/android/binderfs.c
@@ -39,7 +39,6 @@
#define FIRST_INODE 1
#define SECOND_INODE 2
#define INODE_OFFSET 3
-#define INTSTRLEN 21
#define BINDERFS_MAX_MINOR (1U << MINORBITS)
/* Ensure that the initial ipc namespace always has devices available. */
#define BINDERFS_MAX_MINOR_CAPPED (BINDERFS_MAX_MINOR - 4)
@@ -340,22 +339,10 @@ static int binderfs_show_options(struct seq_file *seq, struct dentry *root)
return 0;
}
-static void binderfs_put_super(struct super_block *sb)
-{
- struct binderfs_info *info = sb->s_fs_info;
-
- if (info && info->ipc_ns)
- put_ipc_ns(info->ipc_ns);
-
- kfree(info);
- sb->s_fs_info = NULL;
-}
-
static const struct super_operations binderfs_super_ops = {
.evict_inode = binderfs_evict_inode,
.show_options = binderfs_show_options,
.statfs = simple_statfs,
- .put_super = binderfs_put_super,
};
static inline bool is_binderfs_control_device(const struct dentry *dentry)
@@ -785,11 +772,27 @@ static int binderfs_init_fs_context(struct fs_context *fc)
return 0;
}
+static void binderfs_kill_super(struct super_block *sb)
+{
+ struct binderfs_info *info = sb->s_fs_info;
+
+ /*
+ * During inode eviction struct binderfs_info is needed.
+ * So first wipe the super_block then free struct binderfs_info.
+ */
+ kill_litter_super(sb);
+
+ if (info && info->ipc_ns)
+ put_ipc_ns(info->ipc_ns);
+
+ kfree(info);
+}
+
static struct file_system_type binder_fs_type = {
.name = "binder",
.init_fs_context = binderfs_init_fs_context,
.parameters = binderfs_fs_parameters,
- .kill_sb = kill_litter_super,
+ .kill_sb = binderfs_kill_super,
.fs_flags = FS_USERNS_MOUNT,
};
diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index fa2246da63c1..caa4ce28cf9e 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -843,7 +843,7 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
struct mhi_controller *mhi_cntrl;
int err;
- dev_dbg(&pdev->dev, "MHI PCI device found: %s\n", info->name);
+ dev_info(&pdev->dev, "MHI PCI device found: %s\n", info->name);
/* mhi_pdev.mhi_cntrl must be zero-initialized */
mhi_pdev = devm_kzalloc(&pdev->dev, sizeof(*mhi_pdev), GFP_KERNEL);
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index 5dc2669432ba..d51573ac525e 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -466,18 +466,7 @@ static int mvebu_sdram_debug_show(struct seq_file *seq, void *v)
struct mvebu_mbus_state *mbus = &mbus_state;
return mbus->soc->show_cpu_target(mbus, seq, v);
}
-
-static int mvebu_sdram_debug_open(struct inode *inode, struct file *file)
-{
- return single_open(file, mvebu_sdram_debug_show, inode->i_private);
-}
-
-static const struct file_operations mvebu_sdram_debug_fops = {
- .open = mvebu_sdram_debug_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(mvebu_sdram_debug);
static int mvebu_devs_debug_show(struct seq_file *seq, void *v)
{
@@ -516,18 +505,7 @@ static int mvebu_devs_debug_show(struct seq_file *seq, void *v)
return 0;
}
-
-static int mvebu_devs_debug_open(struct inode *inode, struct file *file)
-{
- return single_open(file, mvebu_devs_debug_show, inode->i_private);
-}
-
-static const struct file_operations mvebu_devs_debug_fops = {
- .open = mvebu_devs_debug_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(mvebu_devs_debug);
/*
* SoC-specific functions and definitions
diff --git a/drivers/comedi/comedi_fops.c b/drivers/comedi/comedi_fops.c
index 55a0cae04b8d..e2114bcf815a 100644
--- a/drivers/comedi/comedi_fops.c
+++ b/drivers/comedi/comedi_fops.c
@@ -396,7 +396,7 @@ static ssize_t max_read_buffer_kb_show(struct device *csdev,
mutex_unlock(&dev->mutex);
comedi_dev_put(dev);
- return snprintf(buf, PAGE_SIZE, "%u\n", size);
+ return sysfs_emit(buf, "%u\n", size);
}
static ssize_t max_read_buffer_kb_store(struct device *csdev,
@@ -452,7 +452,7 @@ static ssize_t read_buffer_kb_show(struct device *csdev,
mutex_unlock(&dev->mutex);
comedi_dev_put(dev);
- return snprintf(buf, PAGE_SIZE, "%u\n", size);
+ return sysfs_emit(buf, "%u\n", size);
}
static ssize_t read_buffer_kb_store(struct device *csdev,
@@ -509,7 +509,7 @@ static ssize_t max_write_buffer_kb_show(struct device *csdev,
mutex_unlock(&dev->mutex);
comedi_dev_put(dev);
- return snprintf(buf, PAGE_SIZE, "%u\n", size);
+ return sysfs_emit(buf, "%u\n", size);
}
static ssize_t max_write_buffer_kb_store(struct device *csdev,
@@ -565,7 +565,7 @@ static ssize_t write_buffer_kb_show(struct device *csdev,
mutex_unlock(&dev->mutex);
comedi_dev_put(dev);
- return snprintf(buf, PAGE_SIZE, "%u\n", size);
+ return sysfs_emit(buf, "%u\n", size);
}
static ssize_t write_buffer_kb_store(struct device *csdev,
diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c
index 4407203e0c9b..1188673d8521 100644
--- a/drivers/counter/104-quad-8.c
+++ b/drivers/counter/104-quad-8.c
@@ -549,6 +549,32 @@ static int quad8_index_polarity_set(struct counter_device *counter,
return 0;
}
+static int quad8_polarity_read(struct counter_device *counter,
+ struct counter_signal *signal,
+ enum counter_signal_polarity *polarity)
+{
+ int err;
+ u32 index_polarity;
+
+ err = quad8_index_polarity_get(counter, signal, &index_polarity);
+ if (err)
+ return err;
+
+ *polarity = (index_polarity) ? COUNTER_SIGNAL_POLARITY_POSITIVE :
+ COUNTER_SIGNAL_POLARITY_NEGATIVE;
+
+ return 0;
+}
+
+static int quad8_polarity_write(struct counter_device *counter,
+ struct counter_signal *signal,
+ enum counter_signal_polarity polarity)
+{
+ const u32 pol = (polarity == COUNTER_SIGNAL_POLARITY_POSITIVE) ? 1 : 0;
+
+ return quad8_index_polarity_set(counter, signal, pol);
+}
+
static const char *const quad8_synchronous_modes[] = {
"non-synchronous",
"synchronous"
@@ -977,6 +1003,13 @@ static struct counter_comp quad8_signal_ext[] = {
quad8_signal_fck_prescaler_write)
};
+static const enum counter_signal_polarity quad8_polarities[] = {
+ COUNTER_SIGNAL_POLARITY_POSITIVE,
+ COUNTER_SIGNAL_POLARITY_NEGATIVE,
+};
+
+static DEFINE_COUNTER_AVAILABLE(quad8_polarity_available, quad8_polarities);
+
static DEFINE_COUNTER_ENUM(quad8_index_pol_enum, quad8_index_polarity_modes);
static DEFINE_COUNTER_ENUM(quad8_synch_mode_enum, quad8_synchronous_modes);
@@ -984,6 +1017,8 @@ static struct counter_comp quad8_index_ext[] = {
COUNTER_COMP_SIGNAL_ENUM("index_polarity", quad8_index_polarity_get,
quad8_index_polarity_set,
quad8_index_pol_enum),
+ COUNTER_COMP_POLARITY(quad8_polarity_read, quad8_polarity_write,
+ quad8_polarity_available),
COUNTER_COMP_SIGNAL_ENUM("synchronous_mode", quad8_synchronous_mode_get,
quad8_synchronous_mode_set,
quad8_synch_mode_enum),
@@ -1241,3 +1276,4 @@ module_isa_driver(quad8_driver, num_quad8);
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
MODULE_DESCRIPTION("ACCES 104-QUAD-8 driver");
MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(COUNTER);
diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
index 5edd155f1911..d388bf26f4dc 100644
--- a/drivers/counter/Kconfig
+++ b/drivers/counter/Kconfig
@@ -101,4 +101,19 @@ config INTEL_QEP
To compile this driver as a module, choose M here: the module
will be called intel-qep.
+config TI_ECAP_CAPTURE
+ tristate "TI eCAP capture driver"
+ depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+ depends on HAS_IOMEM
+ select REGMAP_MMIO
+ help
+ Select this option to enable the Texas Instruments Enhanced Capture
+ (eCAP) driver in input mode.
+
+ It can be used to timestamp events (falling/rising edges) detected
+ on ECAP input signal.
+
+ To compile this driver as a module, choose M here: the module
+ will be called ti-ecap-capture.
+
endif # COUNTER
diff --git a/drivers/counter/Makefile b/drivers/counter/Makefile
index 8fde6c100ebc..b9a369e0d4fc 100644
--- a/drivers/counter/Makefile
+++ b/drivers/counter/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_TI_EQEP) += ti-eqep.o
obj-$(CONFIG_FTM_QUADDEC) += ftm-quaddec.o
obj-$(CONFIG_MICROCHIP_TCB_CAPTURE) += microchip-tcb-capture.o
obj-$(CONFIG_INTEL_QEP) += intel-qep.o
+obj-$(CONFIG_TI_ECAP_CAPTURE) += ti-ecap-capture.o
diff --git a/drivers/counter/counter-chrdev.c b/drivers/counter/counter-chrdev.c
index 69d340be9c93..80acdf62794a 100644
--- a/drivers/counter/counter-chrdev.c
+++ b/drivers/counter/counter-chrdev.c
@@ -40,7 +40,11 @@ struct counter_comp_node {
a.signal_u32_read == b.signal_u32_read || \
a.device_u64_read == b.device_u64_read || \
a.count_u64_read == b.count_u64_read || \
- a.signal_u64_read == b.signal_u64_read)
+ a.signal_u64_read == b.signal_u64_read || \
+ a.signal_array_u32_read == b.signal_array_u32_read || \
+ a.device_array_u64_read == b.device_array_u64_read || \
+ a.count_array_u64_read == b.count_array_u64_read || \
+ a.signal_array_u64_read == b.signal_array_u64_read)
#define counter_comp_read_is_set(comp) \
(comp.action_read || \
@@ -52,7 +56,11 @@ struct counter_comp_node {
comp.signal_u32_read || \
comp.device_u64_read || \
comp.count_u64_read || \
- comp.signal_u64_read)
+ comp.signal_u64_read || \
+ comp.signal_array_u32_read || \
+ comp.device_array_u64_read || \
+ comp.count_array_u64_read || \
+ comp.signal_array_u64_read)
static ssize_t counter_chrdev_read(struct file *filp, char __user *buf,
size_t len, loff_t *f_ps)
@@ -228,6 +236,31 @@ static int counter_disable_events(struct counter_device *const counter)
return err;
}
+static int counter_get_ext(const struct counter_comp *const ext,
+ const size_t num_ext, const size_t component_id,
+ size_t *const ext_idx, size_t *const id)
+{
+ struct counter_array *element;
+
+ *id = 0;
+ for (*ext_idx = 0; *ext_idx < num_ext; (*ext_idx)++) {
+ if (*id == component_id)
+ return 0;
+
+ if (ext->type == COUNTER_COMP_ARRAY) {
+ element = ext->priv;
+
+ if (component_id - *id < element->length)
+ return 0;
+
+ *id += element->length;
+ } else
+ (*id)++;
+ }
+
+ return -EINVAL;
+}
+
static int counter_add_watch(struct counter_device *const counter,
const unsigned long arg)
{
@@ -237,6 +270,7 @@ static int counter_add_watch(struct counter_device *const counter,
size_t parent, id;
struct counter_comp *ext;
size_t num_ext;
+ size_t ext_idx, ext_id;
int err = 0;
if (copy_from_user(&watch, uwatch, sizeof(watch)))
@@ -314,11 +348,11 @@ static int counter_add_watch(struct counter_device *const counter,
comp_node.comp.priv = counter->counts[parent].synapses + id;
break;
case COUNTER_COMPONENT_EXTENSION:
- if (id >= num_ext)
- return -EINVAL;
- id = array_index_nospec(id, num_ext);
+ err = counter_get_ext(ext, num_ext, id, &ext_idx, &ext_id);
+ if (err < 0)
+ return err;
- comp_node.comp = ext[id];
+ comp_node.comp = ext[ext_idx];
break;
default:
return -EINVAL;
@@ -451,14 +485,56 @@ void counter_chrdev_remove(struct counter_device *const counter)
kfifo_free(&counter->events);
}
+static int counter_get_array_data(struct counter_device *const counter,
+ const enum counter_scope scope,
+ void *const parent,
+ const struct counter_comp *const comp,
+ const size_t idx, u64 *const value)
+{
+ const struct counter_array *const element = comp->priv;
+ u32 value_u32 = 0;
+ int ret;
+
+ switch (element->type) {
+ case COUNTER_COMP_SIGNAL_POLARITY:
+ if (scope != COUNTER_SCOPE_SIGNAL)
+ return -EINVAL;
+ ret = comp->signal_array_u32_read(counter, parent, idx,
+ &value_u32);
+ *value = value_u32;
+ return ret;
+ case COUNTER_COMP_U64:
+ switch (scope) {
+ case COUNTER_SCOPE_DEVICE:
+ return comp->device_array_u64_read(counter, idx, value);
+ case COUNTER_SCOPE_SIGNAL:
+ return comp->signal_array_u64_read(counter, parent, idx,
+ value);
+ case COUNTER_SCOPE_COUNT:
+ return comp->count_array_u64_read(counter, parent, idx,
+ value);
+ default:
+ return -EINVAL;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
static int counter_get_data(struct counter_device *const counter,
const struct counter_comp_node *const comp_node,
u64 *const value)
{
const struct counter_comp *const comp = &comp_node->comp;
- void *const parent = comp_node->parent;
+ const enum counter_scope scope = comp_node->component.scope;
+ const size_t id = comp_node->component.id;
+ struct counter_signal *const signal = comp_node->parent;
+ struct counter_count *const count = comp_node->parent;
u8 value_u8 = 0;
u32 value_u32 = 0;
+ const struct counter_comp *ext;
+ size_t num_ext;
+ size_t ext_idx, ext_id;
int ret;
if (comp_node->component.type == COUNTER_COMPONENT_NONE)
@@ -467,15 +543,15 @@ static int counter_get_data(struct counter_device *const counter,
switch (comp->type) {
case COUNTER_COMP_U8:
case COUNTER_COMP_BOOL:
- switch (comp_node->component.scope) {
+ switch (scope) {
case COUNTER_SCOPE_DEVICE:
ret = comp->device_u8_read(counter, &value_u8);
break;
case COUNTER_SCOPE_SIGNAL:
- ret = comp->signal_u8_read(counter, parent, &value_u8);
+ ret = comp->signal_u8_read(counter, signal, &value_u8);
break;
case COUNTER_SCOPE_COUNT:
- ret = comp->count_u8_read(counter, parent, &value_u8);
+ ret = comp->count_u8_read(counter, count, &value_u8);
break;
default:
return -EINVAL;
@@ -487,16 +563,17 @@ static int counter_get_data(struct counter_device *const counter,
case COUNTER_COMP_ENUM:
case COUNTER_COMP_COUNT_DIRECTION:
case COUNTER_COMP_COUNT_MODE:
- switch (comp_node->component.scope) {
+ case COUNTER_COMP_SIGNAL_POLARITY:
+ switch (scope) {
case COUNTER_SCOPE_DEVICE:
ret = comp->device_u32_read(counter, &value_u32);
break;
case COUNTER_SCOPE_SIGNAL:
- ret = comp->signal_u32_read(counter, parent,
+ ret = comp->signal_u32_read(counter, signal,
&value_u32);
break;
case COUNTER_SCOPE_COUNT:
- ret = comp->count_u32_read(counter, parent, &value_u32);
+ ret = comp->count_u32_read(counter, count, &value_u32);
break;
default:
return -EINVAL;
@@ -504,21 +581,43 @@ static int counter_get_data(struct counter_device *const counter,
*value = value_u32;
return ret;
case COUNTER_COMP_U64:
- switch (comp_node->component.scope) {
+ switch (scope) {
case COUNTER_SCOPE_DEVICE:
return comp->device_u64_read(counter, value);
case COUNTER_SCOPE_SIGNAL:
- return comp->signal_u64_read(counter, parent, value);
+ return comp->signal_u64_read(counter, signal, value);
case COUNTER_SCOPE_COUNT:
- return comp->count_u64_read(counter, parent, value);
+ return comp->count_u64_read(counter, count, value);
default:
return -EINVAL;
}
case COUNTER_COMP_SYNAPSE_ACTION:
- ret = comp->action_read(counter, parent, comp->priv,
- &value_u32);
+ ret = comp->action_read(counter, count, comp->priv, &value_u32);
*value = value_u32;
return ret;
+ case COUNTER_COMP_ARRAY:
+ switch (scope) {
+ case COUNTER_SCOPE_DEVICE:
+ ext = counter->ext;
+ num_ext = counter->num_ext;
+ break;
+ case COUNTER_SCOPE_SIGNAL:
+ ext = signal->ext;
+ num_ext = signal->num_ext;
+ break;
+ case COUNTER_SCOPE_COUNT:
+ ext = count->ext;
+ num_ext = count->num_ext;
+ break;
+ default:
+ return -EINVAL;
+ }
+ ret = counter_get_ext(ext, num_ext, id, &ext_idx, &ext_id);
+ if (ret < 0)
+ return ret;
+
+ return counter_get_array_data(counter, scope, comp_node->parent,
+ comp, id - ext_id, value);
default:
return -EINVAL;
}
@@ -574,4 +673,4 @@ exit_early:
if (copied)
wake_up_poll(&counter->events_wait, EPOLLIN);
}
-EXPORT_SYMBOL_GPL(counter_push_event);
+EXPORT_SYMBOL_NS_GPL(counter_push_event, COUNTER);
diff --git a/drivers/counter/counter-core.c b/drivers/counter/counter-core.c
index 938651f9e9e0..09c77afb33ca 100644
--- a/drivers/counter/counter-core.c
+++ b/drivers/counter/counter-core.c
@@ -73,7 +73,7 @@ void *counter_priv(const struct counter_device *const counter)
return &ch->privdata;
}
-EXPORT_SYMBOL_GPL(counter_priv);
+EXPORT_SYMBOL_NS_GPL(counter_priv, COUNTER);
/**
* counter_alloc - allocate a counter_device
@@ -133,13 +133,13 @@ err_ida_alloc:
return NULL;
}
-EXPORT_SYMBOL_GPL(counter_alloc);
+EXPORT_SYMBOL_NS_GPL(counter_alloc, COUNTER);
void counter_put(struct counter_device *counter)
{
put_device(&counter->dev);
}
-EXPORT_SYMBOL_GPL(counter_put);
+EXPORT_SYMBOL_NS_GPL(counter_put, COUNTER);
/**
* counter_add - complete registration of a counter
@@ -166,7 +166,7 @@ int counter_add(struct counter_device *counter)
/* implies device_add(dev) */
return cdev_device_add(&counter->chrdev, dev);
}
-EXPORT_SYMBOL_GPL(counter_add);
+EXPORT_SYMBOL_NS_GPL(counter_add, COUNTER);
/**
* counter_unregister - unregister Counter from the system
@@ -188,7 +188,7 @@ void counter_unregister(struct counter_device *const counter)
mutex_unlock(&counter->ops_exist_lock);
}
-EXPORT_SYMBOL_GPL(counter_unregister);
+EXPORT_SYMBOL_NS_GPL(counter_unregister, COUNTER);
static void devm_counter_release(void *counter)
{
@@ -223,7 +223,7 @@ struct counter_device *devm_counter_alloc(struct device *dev, size_t sizeof_priv
return counter;
}
-EXPORT_SYMBOL_GPL(devm_counter_alloc);
+EXPORT_SYMBOL_NS_GPL(devm_counter_alloc, COUNTER);
/**
* devm_counter_add - complete registration of a counter
@@ -244,7 +244,7 @@ int devm_counter_add(struct device *dev,
return devm_add_action_or_reset(dev, devm_counter_release, counter);
}
-EXPORT_SYMBOL_GPL(devm_counter_add);
+EXPORT_SYMBOL_NS_GPL(devm_counter_add, COUNTER);
#define COUNTER_DEV_MAX 256
diff --git a/drivers/counter/counter-sysfs.c b/drivers/counter/counter-sysfs.c
index 04eac41dad33..b9efe66f9f8d 100644
--- a/drivers/counter/counter-sysfs.c
+++ b/drivers/counter/counter-sysfs.c
@@ -91,6 +91,11 @@ static const char *const counter_count_mode_str[] = {
[COUNTER_COUNT_MODE_MODULO_N] = "modulo-n"
};
+static const char *const counter_signal_polarity_str[] = {
+ [COUNTER_SIGNAL_POLARITY_POSITIVE] = "positive",
+ [COUNTER_SIGNAL_POLARITY_NEGATIVE] = "negative"
+};
+
static ssize_t counter_comp_u8_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -201,6 +206,8 @@ static ssize_t counter_comp_u32_show(struct device *dev,
return sysfs_emit(buf, "%s\n", counter_count_direction_str[data]);
case COUNTER_COMP_COUNT_MODE:
return sysfs_emit(buf, "%s\n", counter_count_mode_str[data]);
+ case COUNTER_COMP_SIGNAL_POLARITY:
+ return sysfs_emit(buf, "%s\n", counter_signal_polarity_str[data]);
default:
return sysfs_emit(buf, "%u\n", (unsigned int)data);
}
@@ -252,6 +259,10 @@ static ssize_t counter_comp_u32_store(struct device *dev,
err = counter_find_enum(&data, avail->enums, avail->num_items,
buf, counter_count_mode_str);
break;
+ case COUNTER_COMP_SIGNAL_POLARITY:
+ err = counter_find_enum(&data, avail->enums, avail->num_items,
+ buf, counter_signal_polarity_str);
+ break;
default:
err = kstrtou32(buf, 0, &data);
break;
@@ -341,6 +352,124 @@ static ssize_t counter_comp_u64_store(struct device *dev,
return len;
}
+static ssize_t counter_comp_array_u32_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ const struct counter_attribute *const a = to_counter_attribute(attr);
+ struct counter_device *const counter = counter_from_dev(dev);
+ const struct counter_array *const element = a->comp.priv;
+ int err;
+ u32 data = 0;
+
+ if (a->scope != COUNTER_SCOPE_SIGNAL ||
+ element->type != COUNTER_COMP_SIGNAL_POLARITY)
+ return -EINVAL;
+
+ err = a->comp.signal_array_u32_read(counter, a->parent, element->idx,
+ &data);
+ if (err < 0)
+ return err;
+
+ return sysfs_emit(buf, "%s\n", counter_signal_polarity_str[data]);
+}
+
+static ssize_t counter_comp_array_u32_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ const struct counter_attribute *const a = to_counter_attribute(attr);
+ struct counter_device *const counter = counter_from_dev(dev);
+ const struct counter_array *const element = a->comp.priv;
+ int err;
+ u32 data = 0;
+
+ if (element->type != COUNTER_COMP_SIGNAL_POLARITY ||
+ a->scope != COUNTER_SCOPE_SIGNAL)
+ return -EINVAL;
+
+ err = counter_find_enum(&data, element->avail->enums,
+ element->avail->num_items, buf,
+ counter_signal_polarity_str);
+ if (err < 0)
+ return err;
+
+ err = a->comp.signal_array_u32_write(counter, a->parent, element->idx,
+ data);
+ if (err < 0)
+ return err;
+
+ return len;
+}
+
+static ssize_t counter_comp_array_u64_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ const struct counter_attribute *const a = to_counter_attribute(attr);
+ struct counter_device *const counter = counter_from_dev(dev);
+ const struct counter_array *const element = a->comp.priv;
+ int err;
+ u64 data = 0;
+
+ switch (a->scope) {
+ case COUNTER_SCOPE_DEVICE:
+ err = a->comp.device_array_u64_read(counter, element->idx,
+ &data);
+ break;
+ case COUNTER_SCOPE_SIGNAL:
+ err = a->comp.signal_array_u64_read(counter, a->parent,
+ element->idx, &data);
+ break;
+ case COUNTER_SCOPE_COUNT:
+ err = a->comp.count_array_u64_read(counter, a->parent,
+ element->idx, &data);
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (err < 0)
+ return err;
+
+ return sysfs_emit(buf, "%llu\n", (unsigned long long)data);
+}
+
+static ssize_t counter_comp_array_u64_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ const struct counter_attribute *const a = to_counter_attribute(attr);
+ struct counter_device *const counter = counter_from_dev(dev);
+ const struct counter_array *const element = a->comp.priv;
+ int err;
+ u64 data = 0;
+
+ err = kstrtou64(buf, 0, &data);
+ if (err < 0)
+ return err;
+
+ switch (a->scope) {
+ case COUNTER_SCOPE_DEVICE:
+ err = a->comp.device_array_u64_write(counter, element->idx,
+ data);
+ break;
+ case COUNTER_SCOPE_SIGNAL:
+ err = a->comp.signal_array_u64_write(counter, a->parent,
+ element->idx, data);
+ break;
+ case COUNTER_SCOPE_COUNT:
+ err = a->comp.count_array_u64_write(counter, a->parent,
+ element->idx, data);
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (err < 0)
+ return err;
+
+ return len;
+}
+
static ssize_t enums_available_show(const u32 *const enums,
const size_t num_enums,
const char *const strs[], char *buf)
@@ -435,6 +564,7 @@ static int counter_attr_create(struct device *const dev,
const enum counter_scope scope,
void *const parent)
{
+ const struct counter_array *const array = comp->priv;
struct counter_attribute *counter_attr;
struct device_attribute *dev_attr;
@@ -469,6 +599,7 @@ static int counter_attr_create(struct device *const dev,
case COUNTER_COMP_ENUM:
case COUNTER_COMP_COUNT_DIRECTION:
case COUNTER_COMP_COUNT_MODE:
+ case COUNTER_COMP_SIGNAL_POLARITY:
if (comp->device_u32_read) {
dev_attr->attr.mode |= 0444;
dev_attr->show = counter_comp_u32_show;
@@ -488,6 +619,32 @@ static int counter_attr_create(struct device *const dev,
dev_attr->store = counter_comp_u64_store;
}
break;
+ case COUNTER_COMP_ARRAY:
+ switch (array->type) {
+ case COUNTER_COMP_SIGNAL_POLARITY:
+ if (comp->signal_array_u32_read) {
+ dev_attr->attr.mode |= 0444;
+ dev_attr->show = counter_comp_array_u32_show;
+ }
+ if (comp->signal_array_u32_write) {
+ dev_attr->attr.mode |= 0200;
+ dev_attr->store = counter_comp_array_u32_store;
+ }
+ break;
+ case COUNTER_COMP_U64:
+ if (comp->device_array_u64_read) {
+ dev_attr->attr.mode |= 0444;
+ dev_attr->show = counter_comp_array_u64_show;
+ }
+ if (comp->device_array_u64_write) {
+ dev_attr->attr.mode |= 0200;
+ dev_attr->store = counter_comp_array_u64_store;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
default:
return -EINVAL;
}
@@ -580,6 +737,95 @@ static int counter_comp_id_attr_create(struct device *const dev,
return 0;
}
+static int counter_ext_attrs_create(struct device *const dev,
+ struct counter_attribute_group *const group,
+ const struct counter_comp *const ext,
+ const enum counter_scope scope,
+ void *const parent, const size_t id)
+{
+ int err;
+
+ /* Create main extension attribute */
+ err = counter_attr_create(dev, group, ext, scope, parent);
+ if (err < 0)
+ return err;
+
+ /* Create extension id attribute */
+ return counter_comp_id_attr_create(dev, group, ext->name, id);
+}
+
+static int counter_array_attrs_create(struct device *const dev,
+ struct counter_attribute_group *const group,
+ const struct counter_comp *const comp,
+ const enum counter_scope scope,
+ void *const parent, const size_t id)
+{
+ const struct counter_array *const array = comp->priv;
+ struct counter_comp ext = *comp;
+ struct counter_array *element;
+ size_t idx;
+ int err;
+
+ /* Create an attribute for each array element */
+ for (idx = 0; idx < array->length; idx++) {
+ /* Generate array element attribute name */
+ ext.name = devm_kasprintf(dev, GFP_KERNEL, "%s%zu", comp->name,
+ idx);
+ if (!ext.name)
+ return -ENOMEM;
+
+ /* Allocate and configure array element */
+ element = devm_kzalloc(dev, sizeof(*element), GFP_KERNEL);
+ if (!element)
+ return -ENOMEM;
+ element->type = array->type;
+ element->avail = array->avail;
+ element->idx = idx;
+ ext.priv = element;
+
+ /* Create all attributes associated with the array element */
+ err = counter_ext_attrs_create(dev, group, &ext, scope, parent,
+ id + idx);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+static int counter_sysfs_exts_add(struct device *const dev,
+ struct counter_attribute_group *const group,
+ const struct counter_comp *const exts,
+ const size_t num_ext,
+ const enum counter_scope scope,
+ void *const parent)
+{
+ size_t i;
+ const struct counter_comp *ext;
+ int err;
+ size_t id = 0;
+ const struct counter_array *array;
+
+ /* Create attributes for each extension */
+ for (i = 0; i < num_ext; i++) {
+ ext = &exts[i];
+ if (ext->type == COUNTER_COMP_ARRAY) {
+ err = counter_array_attrs_create(dev, group, ext, scope,
+ parent, id);
+ array = ext->priv;
+ id += array->length;
+ } else {
+ err = counter_ext_attrs_create(dev, group, ext, scope,
+ parent, id);
+ id++;
+ }
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
static struct counter_comp counter_signal_comp = {
.type = COUNTER_COMP_SIGNAL_LEVEL,
.name = "signal",
@@ -593,8 +839,6 @@ static int counter_signal_attrs_create(struct counter_device *const counter,
struct device *const dev = &counter->dev;
int err;
struct counter_comp comp;
- size_t i;
- struct counter_comp *ext;
/* Create main Signal attribute */
comp = counter_signal_comp;
@@ -608,21 +852,9 @@ static int counter_signal_attrs_create(struct counter_device *const counter,
if (err < 0)
return err;
- /* Create an attribute for each extension */
- for (i = 0; i < signal->num_ext; i++) {
- ext = &signal->ext[i];
-
- err = counter_attr_create(dev, cattr_group, ext, scope, signal);
- if (err < 0)
- return err;
-
- err = counter_comp_id_attr_create(dev, cattr_group, ext->name,
- i);
- if (err < 0)
- return err;
- }
-
- return 0;
+ /* Add Signal extensions */
+ return counter_sysfs_exts_add(dev, cattr_group, signal->ext,
+ signal->num_ext, scope, signal);
}
static int counter_sysfs_signals_add(struct counter_device *const counter,
@@ -707,8 +939,6 @@ static int counter_count_attrs_create(struct counter_device *const counter,
struct device *const dev = &counter->dev;
int err;
struct counter_comp comp;
- size_t i;
- struct counter_comp *ext;
/* Create main Count attribute */
comp = counter_count_comp;
@@ -731,21 +961,9 @@ static int counter_count_attrs_create(struct counter_device *const counter,
if (err < 0)
return err;
- /* Create an attribute for each extension */
- for (i = 0; i < count->num_ext; i++) {
- ext = &count->ext[i];
-
- err = counter_attr_create(dev, cattr_group, ext, scope, count);
- if (err < 0)
- return err;
-
- err = counter_comp_id_attr_create(dev, cattr_group, ext->name,
- i);
- if (err < 0)
- return err;
- }
-
- return 0;
+ /* Add Count extensions */
+ return counter_sysfs_exts_add(dev, cattr_group, count->ext,
+ count->num_ext, scope, count);
}
static int counter_sysfs_counts_add(struct counter_device *const counter,
@@ -838,8 +1056,6 @@ static int counter_sysfs_attr_add(struct counter_device *const counter,
const enum counter_scope scope = COUNTER_SCOPE_DEVICE;
struct device *const dev = &counter->dev;
int err;
- size_t i;
- struct counter_comp *ext;
/* Add Signals sysfs attributes */
err = counter_sysfs_signals_add(counter, cattr_group);
@@ -876,19 +1092,9 @@ static int counter_sysfs_attr_add(struct counter_device *const counter,
if (err < 0)
return err;
- /* Create an attribute for each extension */
- for (i = 0; i < counter->num_ext; i++) {
- ext = &counter->ext[i];
-
- err = counter_attr_create(dev, cattr_group, ext, scope, NULL);
- if (err < 0)
- return err;
-
- err = counter_comp_id_attr_create(dev, cattr_group, ext->name,
- i);
- if (err < 0)
- return err;
- }
+ /* Add device extensions */
+ return counter_sysfs_exts_add(dev, cattr_group, counter->ext,
+ counter->num_ext, scope, NULL);
return 0;
}
diff --git a/drivers/counter/ftm-quaddec.c b/drivers/counter/ftm-quaddec.c
index 2a58582a9df4..aea6622a9b13 100644
--- a/drivers/counter/ftm-quaddec.c
+++ b/drivers/counter/ftm-quaddec.c
@@ -325,3 +325,4 @@ module_platform_driver(ftm_quaddec_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Kjeld Flarup <kfa@deif.com>");
MODULE_AUTHOR("Patrick Havelange <patrick.havelange@essensium.com>");
+MODULE_IMPORT_NS(COUNTER);
diff --git a/drivers/counter/intel-qep.c b/drivers/counter/intel-qep.c
index 47a6a9dfc9e8..af5942e66f7d 100644
--- a/drivers/counter/intel-qep.c
+++ b/drivers/counter/intel-qep.c
@@ -523,3 +523,4 @@ MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@linux.intel.com>");
MODULE_AUTHOR("Raymond Tan <raymond.tan@intel.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Intel Quadrature Encoder Peripheral driver");
+MODULE_IMPORT_NS(COUNTER);
diff --git a/drivers/counter/interrupt-cnt.c b/drivers/counter/interrupt-cnt.c
index 3b13f56bbb11..229473855c5b 100644
--- a/drivers/counter/interrupt-cnt.c
+++ b/drivers/counter/interrupt-cnt.c
@@ -139,12 +139,23 @@ static int interrupt_cnt_signal_read(struct counter_device *counter,
return 0;
}
+static int interrupt_cnt_watch_validate(struct counter_device *counter,
+ const struct counter_watch *watch)
+{
+ if (watch->channel != 0 ||
+ watch->event != COUNTER_EVENT_CHANGE_OF_STATE)
+ return -EINVAL;
+
+ return 0;
+}
+
static const struct counter_ops interrupt_cnt_ops = {
.action_read = interrupt_cnt_action_read,
.count_read = interrupt_cnt_read,
.count_write = interrupt_cnt_write,
.function_read = interrupt_cnt_function_read,
.signal_read = interrupt_cnt_signal_read,
+ .watch_validate = interrupt_cnt_watch_validate,
};
static int interrupt_cnt_probe(struct platform_device *pdev)
@@ -242,3 +253,4 @@ MODULE_ALIAS("platform:interrupt-counter");
MODULE_AUTHOR("Oleksij Rempel <o.rempel@pengutronix.de>");
MODULE_DESCRIPTION("Interrupt counter driver");
MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(COUNTER);
diff --git a/drivers/counter/microchip-tcb-capture.c b/drivers/counter/microchip-tcb-capture.c
index 00844445143b..f9dee15d9777 100644
--- a/drivers/counter/microchip-tcb-capture.c
+++ b/drivers/counter/microchip-tcb-capture.c
@@ -394,3 +394,4 @@ module_platform_driver(mchp_tc_driver);
MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>");
MODULE_DESCRIPTION("Microchip TCB Capture driver");
MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(COUNTER);
diff --git a/drivers/counter/stm32-lptimer-cnt.c b/drivers/counter/stm32-lptimer-cnt.c
index 68031d93ce89..d6b80b6dfc28 100644
--- a/drivers/counter/stm32-lptimer-cnt.c
+++ b/drivers/counter/stm32-lptimer-cnt.c
@@ -520,3 +520,4 @@ MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
MODULE_ALIAS("platform:stm32-lptimer-counter");
MODULE_DESCRIPTION("STMicroelectronics STM32 LPTIM counter driver");
MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(COUNTER);
diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c
index 5779ae7c73cf..9bf20a5d6bda 100644
--- a/drivers/counter/stm32-timer-cnt.c
+++ b/drivers/counter/stm32-timer-cnt.c
@@ -417,3 +417,4 @@ MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>");
MODULE_ALIAS("platform:stm32-timer-counter");
MODULE_DESCRIPTION("STMicroelectronics STM32 TIMER counter driver");
MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(COUNTER);
diff --git a/drivers/counter/ti-ecap-capture.c b/drivers/counter/ti-ecap-capture.c
new file mode 100644
index 000000000000..af10de30aba5
--- /dev/null
+++ b/drivers/counter/ti-ecap-capture.c
@@ -0,0 +1,614 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ECAP Capture driver
+ *
+ * Copyright (C) 2022 Julien Panis <jpanis@baylibre.com>
+ */
+
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/counter.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#define ECAP_DRV_NAME "ecap"
+
+/* ECAP event IDs */
+#define ECAP_CEVT1 0
+#define ECAP_CEVT2 1
+#define ECAP_CEVT3 2
+#define ECAP_CEVT4 3
+#define ECAP_CNTOVF 4
+
+#define ECAP_CEVT_LAST ECAP_CEVT4
+#define ECAP_NB_CEVT (ECAP_CEVT_LAST + 1)
+
+#define ECAP_EVT_LAST ECAP_CNTOVF
+#define ECAP_NB_EVT (ECAP_EVT_LAST + 1)
+
+/* Registers */
+#define ECAP_TSCNT_REG 0x00
+
+#define ECAP_CAP_REG(i) (((i) << 2) + 0x08)
+
+#define ECAP_ECCTL_REG 0x28
+#define ECAP_CAPPOL_BIT(i) BIT((i) << 1)
+#define ECAP_EV_MODE_MASK GENMASK(7, 0)
+#define ECAP_CAPLDEN_BIT BIT(8)
+#define ECAP_CONT_ONESHT_BIT BIT(16)
+#define ECAP_STOPVALUE_MASK GENMASK(18, 17)
+#define ECAP_TSCNTSTP_BIT BIT(20)
+#define ECAP_SYNCO_DIS_MASK GENMASK(23, 22)
+#define ECAP_CAP_APWM_BIT BIT(25)
+#define ECAP_ECCTL_EN_MASK (ECAP_CAPLDEN_BIT | ECAP_TSCNTSTP_BIT)
+#define ECAP_ECCTL_CFG_MASK (ECAP_SYNCO_DIS_MASK | ECAP_STOPVALUE_MASK \
+ | ECAP_ECCTL_EN_MASK | ECAP_CAP_APWM_BIT \
+ | ECAP_CONT_ONESHT_BIT)
+
+#define ECAP_ECINT_EN_FLG_REG 0x2c
+#define ECAP_EVT_EN_MASK GENMASK(ECAP_NB_EVT, ECAP_NB_CEVT)
+#define ECAP_EVT_FLG_BIT(i) BIT((i) + 17)
+
+#define ECAP_ECINT_CLR_FRC_REG 0x30
+#define ECAP_INT_CLR_BIT BIT(0)
+#define ECAP_EVT_CLR_BIT(i) BIT((i) + 1)
+#define ECAP_EVT_CLR_MASK GENMASK(ECAP_NB_EVT, 0)
+
+#define ECAP_PID_REG 0x5c
+
+/* ECAP signals */
+#define ECAP_CLOCK_SIG 0
+#define ECAP_INPUT_SIG 1
+
+static const struct regmap_config ecap_cnt_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = ECAP_PID_REG,
+};
+
+/**
+ * struct ecap_cnt_dev - device private data structure
+ * @enabled: device state
+ * @lock: synchronization lock to prevent I/O race conditions
+ * @clk: device clock
+ * @regmap: device register map
+ * @nb_ovf: number of overflows since capture start
+ * @pm_ctx: device context for PM operations
+ * @pm_ctx.ev_mode: event mode bits
+ * @pm_ctx.time_cntr: timestamp counter value
+ */
+struct ecap_cnt_dev {
+ bool enabled;
+ struct mutex lock;
+ struct clk *clk;
+ struct regmap *regmap;
+ atomic_t nb_ovf;
+ struct {
+ u8 ev_mode;
+ u32 time_cntr;
+ } pm_ctx;
+};
+
+static u8 ecap_cnt_capture_get_evmode(struct counter_device *counter)
+{
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter);
+ unsigned int regval;
+
+ pm_runtime_get_sync(counter->parent);
+ regmap_read(ecap_dev->regmap, ECAP_ECCTL_REG, &regval);
+ pm_runtime_put_sync(counter->parent);
+
+ return regval;
+}
+
+static void ecap_cnt_capture_set_evmode(struct counter_device *counter, u8 ev_mode)
+{
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter);
+
+ pm_runtime_get_sync(counter->parent);
+ regmap_update_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_EV_MODE_MASK, ev_mode);
+ pm_runtime_put_sync(counter->parent);
+}
+
+static void ecap_cnt_capture_enable(struct counter_device *counter)
+{
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter);
+
+ pm_runtime_get_sync(counter->parent);
+
+ /* Enable interrupts on events */
+ regmap_update_bits(ecap_dev->regmap, ECAP_ECINT_EN_FLG_REG,
+ ECAP_EVT_EN_MASK, ECAP_EVT_EN_MASK);
+
+ /* Run counter */
+ regmap_update_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_ECCTL_CFG_MASK,
+ ECAP_SYNCO_DIS_MASK | ECAP_STOPVALUE_MASK | ECAP_ECCTL_EN_MASK);
+}
+
+static void ecap_cnt_capture_disable(struct counter_device *counter)
+{
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter);
+
+ /* Stop counter */
+ regmap_update_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_ECCTL_EN_MASK, 0);
+
+ /* Disable interrupts on events */
+ regmap_update_bits(ecap_dev->regmap, ECAP_ECINT_EN_FLG_REG, ECAP_EVT_EN_MASK, 0);
+
+ pm_runtime_put_sync(counter->parent);
+}
+
+static u32 ecap_cnt_count_get_val(struct counter_device *counter, unsigned int reg)
+{
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter);
+ unsigned int regval;
+
+ pm_runtime_get_sync(counter->parent);
+ regmap_read(ecap_dev->regmap, reg, &regval);
+ pm_runtime_put_sync(counter->parent);
+
+ return regval;
+}
+
+static void ecap_cnt_count_set_val(struct counter_device *counter, unsigned int reg, u32 val)
+{
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter);
+
+ pm_runtime_get_sync(counter->parent);
+ regmap_write(ecap_dev->regmap, reg, val);
+ pm_runtime_put_sync(counter->parent);
+}
+
+static int ecap_cnt_count_read(struct counter_device *counter,
+ struct counter_count *count, u64 *val)
+{
+ *val = ecap_cnt_count_get_val(counter, ECAP_TSCNT_REG);
+
+ return 0;
+}
+
+static int ecap_cnt_count_write(struct counter_device *counter,
+ struct counter_count *count, u64 val)
+{
+ if (val > U32_MAX)
+ return -ERANGE;
+
+ ecap_cnt_count_set_val(counter, ECAP_TSCNT_REG, val);
+
+ return 0;
+}
+
+static int ecap_cnt_function_read(struct counter_device *counter,
+ struct counter_count *count,
+ enum counter_function *function)
+{
+ *function = COUNTER_FUNCTION_INCREASE;
+
+ return 0;
+}
+
+static int ecap_cnt_action_read(struct counter_device *counter,
+ struct counter_count *count,
+ struct counter_synapse *synapse,
+ enum counter_synapse_action *action)
+{
+ *action = (synapse->signal->id == ECAP_CLOCK_SIG) ?
+ COUNTER_SYNAPSE_ACTION_RISING_EDGE :
+ COUNTER_SYNAPSE_ACTION_NONE;
+
+ return 0;
+}
+
+static int ecap_cnt_watch_validate(struct counter_device *counter,
+ const struct counter_watch *watch)
+{
+ if (watch->channel > ECAP_CEVT_LAST)
+ return -EINVAL;
+
+ switch (watch->event) {
+ case COUNTER_EVENT_CAPTURE:
+ case COUNTER_EVENT_OVERFLOW:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ecap_cnt_clk_get_freq(struct counter_device *counter,
+ struct counter_signal *signal, u64 *freq)
+{
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter);
+
+ *freq = clk_get_rate(ecap_dev->clk);
+
+ return 0;
+}
+
+static int ecap_cnt_pol_read(struct counter_device *counter,
+ struct counter_signal *signal,
+ size_t idx, enum counter_signal_polarity *pol)
+{
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter);
+ int bitval;
+
+ pm_runtime_get_sync(counter->parent);
+ bitval = regmap_test_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_CAPPOL_BIT(idx));
+ pm_runtime_put_sync(counter->parent);
+
+ *pol = bitval ? COUNTER_SIGNAL_POLARITY_NEGATIVE : COUNTER_SIGNAL_POLARITY_POSITIVE;
+
+ return 0;
+}
+
+static int ecap_cnt_pol_write(struct counter_device *counter,
+ struct counter_signal *signal,
+ size_t idx, enum counter_signal_polarity pol)
+{
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter);
+
+ pm_runtime_get_sync(counter->parent);
+ if (pol == COUNTER_SIGNAL_POLARITY_NEGATIVE)
+ regmap_set_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_CAPPOL_BIT(idx));
+ else
+ regmap_clear_bits(ecap_dev->regmap, ECAP_ECCTL_REG, ECAP_CAPPOL_BIT(idx));
+ pm_runtime_put_sync(counter->parent);
+
+ return 0;
+}
+
+static int ecap_cnt_cap_read(struct counter_device *counter,
+ struct counter_count *count,
+ size_t idx, u64 *cap)
+{
+ *cap = ecap_cnt_count_get_val(counter, ECAP_CAP_REG(idx));
+
+ return 0;
+}
+
+static int ecap_cnt_cap_write(struct counter_device *counter,
+ struct counter_count *count,
+ size_t idx, u64 cap)
+{
+ if (cap > U32_MAX)
+ return -ERANGE;
+
+ ecap_cnt_count_set_val(counter, ECAP_CAP_REG(idx), cap);
+
+ return 0;
+}
+
+static int ecap_cnt_nb_ovf_read(struct counter_device *counter,
+ struct counter_count *count, u64 *val)
+{
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter);
+
+ *val = atomic_read(&ecap_dev->nb_ovf);
+
+ return 0;
+}
+
+static int ecap_cnt_nb_ovf_write(struct counter_device *counter,
+ struct counter_count *count, u64 val)
+{
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter);
+
+ if (val > U32_MAX)
+ return -ERANGE;
+
+ atomic_set(&ecap_dev->nb_ovf, val);
+
+ return 0;
+}
+
+static int ecap_cnt_ceiling_read(struct counter_device *counter,
+ struct counter_count *count, u64 *val)
+{
+ *val = U32_MAX;
+
+ return 0;
+}
+
+static int ecap_cnt_enable_read(struct counter_device *counter,
+ struct counter_count *count, u8 *enable)
+{
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter);
+
+ *enable = ecap_dev->enabled;
+
+ return 0;
+}
+
+static int ecap_cnt_enable_write(struct counter_device *counter,
+ struct counter_count *count, u8 enable)
+{
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter);
+
+ mutex_lock(&ecap_dev->lock);
+
+ if (enable == ecap_dev->enabled)
+ goto out;
+
+ if (enable)
+ ecap_cnt_capture_enable(counter);
+ else
+ ecap_cnt_capture_disable(counter);
+ ecap_dev->enabled = enable;
+
+out:
+ mutex_unlock(&ecap_dev->lock);
+
+ return 0;
+}
+
+static const struct counter_ops ecap_cnt_ops = {
+ .count_read = ecap_cnt_count_read,
+ .count_write = ecap_cnt_count_write,
+ .function_read = ecap_cnt_function_read,
+ .action_read = ecap_cnt_action_read,
+ .watch_validate = ecap_cnt_watch_validate,
+};
+
+static const enum counter_function ecap_cnt_functions[] = {
+ COUNTER_FUNCTION_INCREASE,
+};
+
+static const enum counter_synapse_action ecap_cnt_clock_actions[] = {
+ COUNTER_SYNAPSE_ACTION_RISING_EDGE,
+};
+
+static const enum counter_synapse_action ecap_cnt_input_actions[] = {
+ COUNTER_SYNAPSE_ACTION_NONE,
+};
+
+static struct counter_comp ecap_cnt_clock_ext[] = {
+ COUNTER_COMP_SIGNAL_U64("frequency", ecap_cnt_clk_get_freq, NULL),
+};
+
+static const enum counter_signal_polarity ecap_cnt_pol_avail[] = {
+ COUNTER_SIGNAL_POLARITY_POSITIVE,
+ COUNTER_SIGNAL_POLARITY_NEGATIVE,
+};
+
+static DEFINE_COUNTER_ARRAY_POLARITY(ecap_cnt_pol_array, ecap_cnt_pol_avail, ECAP_NB_CEVT);
+
+static struct counter_comp ecap_cnt_signal_ext[] = {
+ COUNTER_COMP_ARRAY_POLARITY(ecap_cnt_pol_read, ecap_cnt_pol_write, ecap_cnt_pol_array),
+};
+
+static struct counter_signal ecap_cnt_signals[] = {
+ {
+ .id = ECAP_CLOCK_SIG,
+ .name = "Clock Signal",
+ .ext = ecap_cnt_clock_ext,
+ .num_ext = ARRAY_SIZE(ecap_cnt_clock_ext),
+ },
+ {
+ .id = ECAP_INPUT_SIG,
+ .name = "Input Signal",
+ .ext = ecap_cnt_signal_ext,
+ .num_ext = ARRAY_SIZE(ecap_cnt_signal_ext),
+ },
+};
+
+static struct counter_synapse ecap_cnt_synapses[] = {
+ {
+ .actions_list = ecap_cnt_clock_actions,
+ .num_actions = ARRAY_SIZE(ecap_cnt_clock_actions),
+ .signal = &ecap_cnt_signals[ECAP_CLOCK_SIG],
+ },
+ {
+ .actions_list = ecap_cnt_input_actions,
+ .num_actions = ARRAY_SIZE(ecap_cnt_input_actions),
+ .signal = &ecap_cnt_signals[ECAP_INPUT_SIG],
+ },
+};
+
+static DEFINE_COUNTER_ARRAY_CAPTURE(ecap_cnt_cap_array, ECAP_NB_CEVT);
+
+static struct counter_comp ecap_cnt_count_ext[] = {
+ COUNTER_COMP_ARRAY_CAPTURE(ecap_cnt_cap_read, ecap_cnt_cap_write, ecap_cnt_cap_array),
+ COUNTER_COMP_COUNT_U64("num_overflows", ecap_cnt_nb_ovf_read, ecap_cnt_nb_ovf_write),
+ COUNTER_COMP_CEILING(ecap_cnt_ceiling_read, NULL),
+ COUNTER_COMP_ENABLE(ecap_cnt_enable_read, ecap_cnt_enable_write),
+};
+
+static struct counter_count ecap_cnt_counts[] = {
+ {
+ .name = "Timestamp Counter",
+ .functions_list = ecap_cnt_functions,
+ .num_functions = ARRAY_SIZE(ecap_cnt_functions),
+ .synapses = ecap_cnt_synapses,
+ .num_synapses = ARRAY_SIZE(ecap_cnt_synapses),
+ .ext = ecap_cnt_count_ext,
+ .num_ext = ARRAY_SIZE(ecap_cnt_count_ext),
+ },
+};
+
+static irqreturn_t ecap_cnt_isr(int irq, void *dev_id)
+{
+ struct counter_device *counter_dev = dev_id;
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter_dev);
+ unsigned int clr = 0;
+ unsigned int flg;
+ int i;
+
+ regmap_read(ecap_dev->regmap, ECAP_ECINT_EN_FLG_REG, &flg);
+
+ /* Check capture events */
+ for (i = 0 ; i < ECAP_NB_CEVT ; i++) {
+ if (flg & ECAP_EVT_FLG_BIT(i)) {
+ counter_push_event(counter_dev, COUNTER_EVENT_CAPTURE, i);
+ clr |= ECAP_EVT_CLR_BIT(i);
+ }
+ }
+
+ /* Check counter overflow */
+ if (flg & ECAP_EVT_FLG_BIT(ECAP_CNTOVF)) {
+ atomic_inc(&ecap_dev->nb_ovf);
+ for (i = 0 ; i < ECAP_NB_CEVT ; i++)
+ counter_push_event(counter_dev, COUNTER_EVENT_OVERFLOW, i);
+ clr |= ECAP_EVT_CLR_BIT(ECAP_CNTOVF);
+ }
+
+ clr |= ECAP_INT_CLR_BIT;
+ regmap_update_bits(ecap_dev->regmap, ECAP_ECINT_CLR_FRC_REG, ECAP_EVT_CLR_MASK, clr);
+
+ return IRQ_HANDLED;
+}
+
+static void ecap_cnt_pm_disable(void *dev)
+{
+ pm_runtime_disable(dev);
+}
+
+static int ecap_cnt_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ecap_cnt_dev *ecap_dev;
+ struct counter_device *counter_dev;
+ void __iomem *mmio_base;
+ unsigned long clk_rate;
+ int ret;
+
+ counter_dev = devm_counter_alloc(dev, sizeof(*ecap_dev));
+ if (IS_ERR(counter_dev))
+ return PTR_ERR(counter_dev);
+
+ counter_dev->name = ECAP_DRV_NAME;
+ counter_dev->parent = dev;
+ counter_dev->ops = &ecap_cnt_ops;
+ counter_dev->signals = ecap_cnt_signals;
+ counter_dev->num_signals = ARRAY_SIZE(ecap_cnt_signals);
+ counter_dev->counts = ecap_cnt_counts;
+ counter_dev->num_counts = ARRAY_SIZE(ecap_cnt_counts);
+
+ ecap_dev = counter_priv(counter_dev);
+
+ mutex_init(&ecap_dev->lock);
+
+ ecap_dev->clk = devm_clk_get_enabled(dev, "fck");
+ if (IS_ERR(ecap_dev->clk))
+ return dev_err_probe(dev, PTR_ERR(ecap_dev->clk), "failed to get clock\n");
+
+ clk_rate = clk_get_rate(ecap_dev->clk);
+ if (!clk_rate) {
+ dev_err(dev, "failed to get clock rate\n");
+ return -EINVAL;
+ }
+
+ mmio_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(mmio_base))
+ return PTR_ERR(mmio_base);
+
+ ecap_dev->regmap = devm_regmap_init_mmio(dev, mmio_base, &ecap_cnt_regmap_config);
+ if (IS_ERR(ecap_dev->regmap))
+ return dev_err_probe(dev, PTR_ERR(ecap_dev->regmap), "failed to init regmap\n");
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "failed to get irq\n");
+
+ ret = devm_request_irq(dev, ret, ecap_cnt_isr, 0, pdev->name, counter_dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to request irq\n");
+
+ platform_set_drvdata(pdev, counter_dev);
+
+ pm_runtime_enable(dev);
+
+ /* Register a cleanup callback to care for disabling PM */
+ ret = devm_add_action_or_reset(dev, ecap_cnt_pm_disable, dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to add pm disable action\n");
+
+ ret = devm_counter_add(dev, counter_dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to add counter\n");
+
+ return 0;
+}
+
+static int ecap_cnt_remove(struct platform_device *pdev)
+{
+ struct counter_device *counter_dev = platform_get_drvdata(pdev);
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter_dev);
+
+ if (ecap_dev->enabled)
+ ecap_cnt_capture_disable(counter_dev);
+
+ return 0;
+}
+
+static int ecap_cnt_suspend(struct device *dev)
+{
+ struct counter_device *counter_dev = dev_get_drvdata(dev);
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter_dev);
+
+ /* If eCAP is running, stop capture then save timestamp counter */
+ if (ecap_dev->enabled) {
+ /*
+ * Disabling capture has the following effects:
+ * - interrupts are disabled
+ * - loading of capture registers is disabled
+ * - timebase counter is stopped
+ */
+ ecap_cnt_capture_disable(counter_dev);
+ ecap_dev->pm_ctx.time_cntr = ecap_cnt_count_get_val(counter_dev, ECAP_TSCNT_REG);
+ }
+
+ ecap_dev->pm_ctx.ev_mode = ecap_cnt_capture_get_evmode(counter_dev);
+
+ clk_disable(ecap_dev->clk);
+
+ return 0;
+}
+
+static int ecap_cnt_resume(struct device *dev)
+{
+ struct counter_device *counter_dev = dev_get_drvdata(dev);
+ struct ecap_cnt_dev *ecap_dev = counter_priv(counter_dev);
+
+ clk_enable(ecap_dev->clk);
+
+ ecap_cnt_capture_set_evmode(counter_dev, ecap_dev->pm_ctx.ev_mode);
+
+ /* If eCAP was running, restore timestamp counter then run capture */
+ if (ecap_dev->enabled) {
+ ecap_cnt_count_set_val(counter_dev, ECAP_TSCNT_REG, ecap_dev->pm_ctx.time_cntr);
+ ecap_cnt_capture_enable(counter_dev);
+ }
+
+ return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(ecap_cnt_pm_ops, ecap_cnt_suspend, ecap_cnt_resume);
+
+static const struct of_device_id ecap_cnt_of_match[] = {
+ { .compatible = "ti,am62-ecap-capture" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ecap_cnt_of_match);
+
+static struct platform_driver ecap_cnt_driver = {
+ .probe = ecap_cnt_probe,
+ .remove = ecap_cnt_remove,
+ .driver = {
+ .name = "ecap-capture",
+ .of_match_table = ecap_cnt_of_match,
+ .pm = pm_sleep_ptr(&ecap_cnt_pm_ops),
+ },
+};
+module_platform_driver(ecap_cnt_driver);
+
+MODULE_DESCRIPTION("ECAP Capture driver");
+MODULE_AUTHOR("Julien Panis <jpanis@baylibre.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(COUNTER);
diff --git a/drivers/counter/ti-eqep.c b/drivers/counter/ti-eqep.c
index 0489d26eb47c..b0f24cf3e891 100644
--- a/drivers/counter/ti-eqep.c
+++ b/drivers/counter/ti-eqep.c
@@ -456,3 +456,4 @@ module_platform_driver(ti_eqep_driver);
MODULE_AUTHOR("David Lechner <david@lechnology.com>");
MODULE_DESCRIPTION("TI eQEP counter driver");
MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(COUNTER);
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 954749afb5fe..82e5de1f6f8c 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -153,7 +153,7 @@ config ARM_OMAP2PLUS_CPUFREQ
config ARM_QCOM_CPUFREQ_NVMEM
tristate "Qualcomm nvmem based CPUFreq"
depends on ARCH_QCOM
- depends on QCOM_QFPROM
+ depends on NVMEM_QCOM_QFPROM
depends on QCOM_SMEM
select PM_OPP
help
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index dca7cecb37e3..290186e44e6b 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -183,7 +183,7 @@ config EXTCON_USBC_CROS_EC
config EXTCON_USBC_TUSB320
tristate "TI TUSB320 USB-C extcon support"
- depends on I2C
+ depends on I2C && TYPEC
select REGMAP_I2C
help
Say Y here to enable support for USB Type C cable detection extcon
diff --git a/drivers/extcon/extcon-usbc-tusb320.c b/drivers/extcon/extcon-usbc-tusb320.c
index 6ba3d89b106d..41041ff0fadb 100644
--- a/drivers/extcon/extcon-usbc-tusb320.c
+++ b/drivers/extcon/extcon-usbc-tusb320.c
@@ -1,11 +1,12 @@
// SPDX-License-Identifier: GPL-2.0
-/**
+/*
* drivers/extcon/extcon-tusb320.c - TUSB320 extcon driver
*
* Copyright (C) 2020 National Instruments Corporation
* Author: Michael Auchter <michael.auchter@ni.com>
*/
+#include <linux/bitfield.h>
#include <linux/extcon-provider.h>
#include <linux/i2c.h>
#include <linux/init.h>
@@ -13,6 +14,24 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/regmap.h>
+#include <linux/usb/typec.h>
+
+#define TUSB320_REG8 0x8
+#define TUSB320_REG8_CURRENT_MODE_ADVERTISE GENMASK(7, 6)
+#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB 0x0
+#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A 0x1
+#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A 0x2
+#define TUSB320_REG8_CURRENT_MODE_DETECT GENMASK(5, 4)
+#define TUSB320_REG8_CURRENT_MODE_DETECT_DEF 0x0
+#define TUSB320_REG8_CURRENT_MODE_DETECT_MED 0x1
+#define TUSB320_REG8_CURRENT_MODE_DETECT_ACC 0x2
+#define TUSB320_REG8_CURRENT_MODE_DETECT_HI 0x3
+#define TUSB320_REG8_ACCESSORY_CONNECTED GENMASK(3, 2)
+#define TUSB320_REG8_ACCESSORY_CONNECTED_NONE 0x0
+#define TUSB320_REG8_ACCESSORY_CONNECTED_AUDIO 0x4
+#define TUSB320_REG8_ACCESSORY_CONNECTED_ACC 0x5
+#define TUSB320_REG8_ACCESSORY_CONNECTED_DEBUG 0x6
+#define TUSB320_REG8_ACTIVE_CABLE_DETECTION BIT(0)
#define TUSB320_REG9 0x9
#define TUSB320_REG9_ATTACHED_STATE_SHIFT 6
@@ -55,6 +74,10 @@ struct tusb320_priv {
struct extcon_dev *edev;
struct tusb320_ops *ops;
enum tusb320_attached_state state;
+ struct typec_port *port;
+ struct typec_capability cap;
+ enum typec_port_type port_type;
+ enum typec_pwr_opmode pwr_opmode;
};
static const char * const tusb_attached_states[] = {
@@ -184,19 +207,47 @@ static struct tusb320_ops tusb320l_ops = {
.get_revision = tusb320l_get_revision,
};
-static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
+static int tusb320_set_adv_pwr_mode(struct tusb320_priv *priv)
{
- struct tusb320_priv *priv = dev_id;
- int state, polarity;
- unsigned reg;
+ u8 mode;
+
+ if (priv->pwr_opmode == TYPEC_PWR_MODE_USB)
+ mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB;
+ else if (priv->pwr_opmode == TYPEC_PWR_MODE_1_5A)
+ mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A;
+ else if (priv->pwr_opmode == TYPEC_PWR_MODE_3_0A)
+ mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A;
+ else /* No other mode is supported. */
+ return -EINVAL;
- if (regmap_read(priv->regmap, TUSB320_REG9, &reg)) {
- dev_err(priv->dev, "error during i2c read!\n");
- return IRQ_NONE;
- }
+ return regmap_write_bits(priv->regmap, TUSB320_REG8,
+ TUSB320_REG8_CURRENT_MODE_ADVERTISE,
+ FIELD_PREP(TUSB320_REG8_CURRENT_MODE_ADVERTISE,
+ mode));
+}
- if (!(reg & TUSB320_REG9_INTERRUPT_STATUS))
- return IRQ_NONE;
+static int tusb320_port_type_set(struct typec_port *port,
+ enum typec_port_type type)
+{
+ struct tusb320_priv *priv = typec_get_drvdata(port);
+
+ if (type == TYPEC_PORT_SRC)
+ return priv->ops->set_mode(priv, TUSB320_MODE_DFP);
+ else if (type == TYPEC_PORT_SNK)
+ return priv->ops->set_mode(priv, TUSB320_MODE_UFP);
+ else if (type == TYPEC_PORT_DRP)
+ return priv->ops->set_mode(priv, TUSB320_MODE_DRP);
+ else
+ return priv->ops->set_mode(priv, TUSB320_MODE_PORT);
+}
+
+static const struct typec_operations tusb320_typec_ops = {
+ .port_type_set = tusb320_port_type_set,
+};
+
+static void tusb320_extcon_irq_handler(struct tusb320_priv *priv, u8 reg)
+{
+ int state, polarity;
state = (reg >> TUSB320_REG9_ATTACHED_STATE_SHIFT) &
TUSB320_REG9_ATTACHED_STATE_MASK;
@@ -219,6 +270,64 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
extcon_sync(priv->edev, EXTCON_USB_HOST);
priv->state = state;
+}
+
+static void tusb320_typec_irq_handler(struct tusb320_priv *priv, u8 reg9)
+{
+ struct typec_port *port = priv->port;
+ struct device *dev = priv->dev;
+ u8 mode, role, state;
+ int ret, reg8;
+ bool ori;
+
+ ori = reg9 & TUSB320_REG9_CABLE_DIRECTION;
+ typec_set_orientation(port, ori ? TYPEC_ORIENTATION_REVERSE :
+ TYPEC_ORIENTATION_NORMAL);
+
+ state = (reg9 >> TUSB320_REG9_ATTACHED_STATE_SHIFT) &
+ TUSB320_REG9_ATTACHED_STATE_MASK;
+ if (state == TUSB320_ATTACHED_STATE_DFP)
+ role = TYPEC_SOURCE;
+ else
+ role = TYPEC_SINK;
+
+ typec_set_vconn_role(port, role);
+ typec_set_pwr_role(port, role);
+ typec_set_data_role(port, role == TYPEC_SOURCE ?
+ TYPEC_HOST : TYPEC_DEVICE);
+
+ ret = regmap_read(priv->regmap, TUSB320_REG8, &reg8);
+ if (ret) {
+ dev_err(dev, "error during reg8 i2c read, ret=%d!\n", ret);
+ return;
+ }
+
+ mode = FIELD_GET(TUSB320_REG8_CURRENT_MODE_DETECT, reg8);
+ if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_DEF)
+ typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
+ else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_MED)
+ typec_set_pwr_opmode(port, TYPEC_PWR_MODE_1_5A);
+ else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_HI)
+ typec_set_pwr_opmode(port, TYPEC_PWR_MODE_3_0A);
+ else /* Charge through accessory */
+ typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
+}
+
+static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
+{
+ struct tusb320_priv *priv = dev_id;
+ unsigned int reg;
+
+ if (regmap_read(priv->regmap, TUSB320_REG9, &reg)) {
+ dev_err(priv->dev, "error during i2c read!\n");
+ return IRQ_NONE;
+ }
+
+ if (!(reg & TUSB320_REG9_INTERRUPT_STATUS))
+ return IRQ_NONE;
+
+ tusb320_extcon_irq_handler(priv, reg);
+ tusb320_typec_irq_handler(priv, reg);
regmap_write(priv->regmap, TUSB320_REG9, reg);
@@ -230,8 +339,84 @@ static const struct regmap_config tusb320_regmap_config = {
.val_bits = 8,
};
-static int tusb320_extcon_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int tusb320_extcon_probe(struct tusb320_priv *priv)
+{
+ int ret;
+
+ priv->edev = devm_extcon_dev_allocate(priv->dev, tusb320_extcon_cable);
+ if (IS_ERR(priv->edev)) {
+ dev_err(priv->dev, "failed to allocate extcon device\n");
+ return PTR_ERR(priv->edev);
+ }
+
+ ret = devm_extcon_dev_register(priv->dev, priv->edev);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to register extcon device\n");
+ return ret;
+ }
+
+ extcon_set_property_capability(priv->edev, EXTCON_USB,
+ EXTCON_PROP_USB_TYPEC_POLARITY);
+ extcon_set_property_capability(priv->edev, EXTCON_USB_HOST,
+ EXTCON_PROP_USB_TYPEC_POLARITY);
+
+ return 0;
+}
+
+static int tusb320_typec_probe(struct i2c_client *client,
+ struct tusb320_priv *priv)
+{
+ struct fwnode_handle *connector;
+ const char *cap_str;
+ int ret;
+
+ /* The Type-C connector is optional, for backward compatibility. */
+ connector = device_get_named_child_node(&client->dev, "connector");
+ if (!connector)
+ return 0;
+
+ /* Type-C connector found. */
+ ret = typec_get_fw_cap(&priv->cap, connector);
+ if (ret)
+ return ret;
+
+ priv->port_type = priv->cap.type;
+
+ /* This goes into register 0x8 field CURRENT_MODE_ADVERTISE */
+ ret = fwnode_property_read_string(connector, "typec-power-opmode", &cap_str);
+ if (ret)
+ return ret;
+
+ ret = typec_find_pwr_opmode(cap_str);
+ if (ret < 0)
+ return ret;
+ if (ret == TYPEC_PWR_MODE_PD)
+ return -EINVAL;
+
+ priv->pwr_opmode = ret;
+
+ /* Initialize the hardware with the devicetree settings. */
+ ret = tusb320_set_adv_pwr_mode(priv);
+ if (ret)
+ return ret;
+
+ priv->cap.revision = USB_TYPEC_REV_1_1;
+ priv->cap.accessory[0] = TYPEC_ACCESSORY_AUDIO;
+ priv->cap.accessory[1] = TYPEC_ACCESSORY_DEBUG;
+ priv->cap.orientation_aware = true;
+ priv->cap.driver_data = priv;
+ priv->cap.ops = &tusb320_typec_ops;
+ priv->cap.fwnode = connector;
+
+ priv->port = typec_register_port(&client->dev, &priv->cap);
+ if (IS_ERR(priv->port))
+ return PTR_ERR(priv->port);
+
+ return 0;
+}
+
+static int tusb320_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
struct tusb320_priv *priv;
const void *match_data;
@@ -257,12 +442,6 @@ static int tusb320_extcon_probe(struct i2c_client *client,
priv->ops = (struct tusb320_ops*)match_data;
- priv->edev = devm_extcon_dev_allocate(priv->dev, tusb320_extcon_cable);
- if (IS_ERR(priv->edev)) {
- dev_err(priv->dev, "failed to allocate extcon device\n");
- return PTR_ERR(priv->edev);
- }
-
if (priv->ops->get_revision) {
ret = priv->ops->get_revision(priv, &revision);
if (ret)
@@ -272,16 +451,13 @@ static int tusb320_extcon_probe(struct i2c_client *client,
dev_info(priv->dev, "chip revision %d\n", revision);
}
- ret = devm_extcon_dev_register(priv->dev, priv->edev);
- if (ret < 0) {
- dev_err(priv->dev, "failed to register extcon device\n");
+ ret = tusb320_extcon_probe(priv);
+ if (ret)
return ret;
- }
- extcon_set_property_capability(priv->edev, EXTCON_USB,
- EXTCON_PROP_USB_TYPEC_POLARITY);
- extcon_set_property_capability(priv->edev, EXTCON_USB_HOST,
- EXTCON_PROP_USB_TYPEC_POLARITY);
+ ret = tusb320_typec_probe(client, priv);
+ if (ret)
+ return ret;
/* update initial state */
tusb320_irq_handler(client->irq, priv);
@@ -313,7 +489,7 @@ static const struct of_device_id tusb320_extcon_dt_match[] = {
MODULE_DEVICE_TABLE(of, tusb320_extcon_dt_match);
static struct i2c_driver tusb320_extcon_driver = {
- .probe = tusb320_extcon_probe,
+ .probe = tusb320_probe,
.driver = {
.name = "extcon-tusb320",
.of_match_table = tusb320_extcon_dt_match,
diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
index adaa492c3d2d..4e2575dfeb90 100644
--- a/drivers/firmware/google/gsmi.c
+++ b/drivers/firmware/google/gsmi.c
@@ -681,6 +681,15 @@ static struct notifier_block gsmi_die_notifier = {
static int gsmi_panic_callback(struct notifier_block *nb,
unsigned long reason, void *arg)
{
+
+ /*
+ * Panic callbacks are executed with all other CPUs stopped,
+ * so we must not attempt to spin waiting for gsmi_dev.lock
+ * to be released.
+ */
+ if (spin_is_locked(&gsmi_dev.lock))
+ return NOTIFY_DONE;
+
gsmi_shutdown_reason(GSMI_SHUTDOWN_PANIC);
return NOTIFY_DONE;
}
diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c
index fd1fa55c9113..0914e7328b1a 100644
--- a/drivers/fpga/dfl-pci.c
+++ b/drivers/fpga/dfl-pci.c
@@ -77,12 +77,18 @@ static void cci_pci_free_irq(struct pci_dev *pcidev)
#define PCIE_DEVICE_ID_INTEL_PAC_D5005 0x0B2B
#define PCIE_DEVICE_ID_SILICOM_PAC_N5010 0x1000
#define PCIE_DEVICE_ID_SILICOM_PAC_N5011 0x1001
+#define PCIE_DEVICE_ID_INTEL_DFL 0xbcce
+/* PCI Subdevice ID for PCIE_DEVICE_ID_INTEL_DFL */
+#define PCIE_SUBDEVICE_ID_INTEL_N6000 0x1770
+#define PCIE_SUBDEVICE_ID_INTEL_N6001 0x1771
+#define PCIE_SUBDEVICE_ID_INTEL_C6100 0x17d4
/* VF Device */
#define PCIE_DEVICE_ID_VF_INT_5_X 0xBCBF
#define PCIE_DEVICE_ID_VF_INT_6_X 0xBCC1
#define PCIE_DEVICE_ID_VF_DSC_1_X 0x09C5
#define PCIE_DEVICE_ID_INTEL_PAC_D5005_VF 0x0B2C
+#define PCIE_DEVICE_ID_INTEL_DFL_VF 0xbccf
static struct pci_device_id cci_pcie_id_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_PF_INT_5_X),},
@@ -96,6 +102,18 @@ static struct pci_device_id cci_pcie_id_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_PAC_D5005_VF),},
{PCI_DEVICE(PCI_VENDOR_ID_SILICOM_DENMARK, PCIE_DEVICE_ID_SILICOM_PAC_N5010),},
{PCI_DEVICE(PCI_VENDOR_ID_SILICOM_DENMARK, PCIE_DEVICE_ID_SILICOM_PAC_N5011),},
+ {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL,
+ PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_N6000),},
+ {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL_VF,
+ PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_N6000),},
+ {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL,
+ PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_N6001),},
+ {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL_VF,
+ PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_N6001),},
+ {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL,
+ PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_C6100),},
+ {PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_DFL_VF,
+ PCI_VENDOR_ID_INTEL, PCIE_SUBDEVICE_ID_INTEL_C6100),},
{0,}
};
MODULE_DEVICE_TABLE(pci, cci_pcie_id_tbl);
diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
index 5498bc337f8b..b9aae85ba930 100644
--- a/drivers/fpga/dfl.c
+++ b/drivers/fpga/dfl.c
@@ -1866,7 +1866,7 @@ long dfl_feature_ioctl_set_irq(struct platform_device *pdev,
return -EINVAL;
fds = memdup_user((void __user *)(arg + sizeof(hdr)),
- hdr.count * sizeof(s32));
+ array_size(hdr.count, sizeof(s32)));
if (IS_ERR(fds))
return PTR_ERR(fds);
diff --git a/drivers/fpga/intel-m10-bmc-sec-update.c b/drivers/fpga/intel-m10-bmc-sec-update.c
index 133e511355c9..79d48852825e 100644
--- a/drivers/fpga/intel-m10-bmc-sec-update.c
+++ b/drivers/fpga/intel-m10-bmc-sec-update.c
@@ -605,6 +605,9 @@ static const struct platform_device_id intel_m10bmc_sec_ids[] = {
{
.name = "n3000bmc-sec-update",
},
+ {
+ .name = "d5005bmc-sec-update",
+ },
{ }
};
MODULE_DEVICE_TABLE(platform, intel_m10bmc_sec_ids);
diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c
index bd284c7b8dc9..7436976ea904 100644
--- a/drivers/fpga/microchip-spi.c
+++ b/drivers/fpga/microchip-spi.c
@@ -395,4 +395,5 @@ static struct spi_driver mpf_driver = {
module_spi_driver(mpf_driver);
MODULE_DESCRIPTION("Microchip Polarfire SPI FPGA Manager");
+MODULE_AUTHOR("Ivan Bornyakov <i.bornyakov@metrotek.ru>");
MODULE_LICENSE("GPL");
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index 3a7b78e36701..694e80c06665 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -392,8 +392,8 @@ int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
}
EXPORT_SYMBOL_GPL(fsi_slave_write);
-extern int fsi_slave_claim_range(struct fsi_slave *slave,
- uint32_t addr, uint32_t size)
+int fsi_slave_claim_range(struct fsi_slave *slave,
+ uint32_t addr, uint32_t size)
{
if (addr + size < addr)
return -EINVAL;
@@ -406,8 +406,8 @@ extern int fsi_slave_claim_range(struct fsi_slave *slave,
}
EXPORT_SYMBOL_GPL(fsi_slave_claim_range);
-extern void fsi_slave_release_range(struct fsi_slave *slave,
- uint32_t addr, uint32_t size)
+void fsi_slave_release_range(struct fsi_slave *slave,
+ uint32_t addr, uint32_t size)
{
}
EXPORT_SYMBOL_GPL(fsi_slave_release_range);
@@ -1314,6 +1314,9 @@ int fsi_master_register(struct fsi_master *master)
mutex_init(&master->scan_lock);
master->idx = ida_simple_get(&master_ida, 0, INT_MAX, GFP_KERNEL);
+ if (master->idx < 0)
+ return master->idx;
+
dev_set_name(&master->dev, "fsi%d", master->idx);
master->dev.class = &fsi_master_class;
diff --git a/drivers/fsi/fsi-master-ast-cf.c b/drivers/fsi/fsi-master-ast-cf.c
index 24292acdbaf8..5f608ef8b53c 100644
--- a/drivers/fsi/fsi-master-ast-cf.c
+++ b/drivers/fsi/fsi-master-ast-cf.c
@@ -1324,12 +1324,14 @@ static int fsi_master_acf_probe(struct platform_device *pdev)
}
master->cvic = devm_of_iomap(&pdev->dev, np, 0, NULL);
if (IS_ERR(master->cvic)) {
+ of_node_put(np);
rc = PTR_ERR(master->cvic);
dev_err(&pdev->dev, "Error %d mapping CVIC\n", rc);
goto err_free;
}
rc = of_property_read_u32(np, "copro-sw-interrupts",
&master->cvic_sw_irq);
+ of_node_put(np);
if (rc) {
dev_err(&pdev->dev, "Can't find coprocessor SW interrupt\n");
goto err_free;
diff --git a/drivers/fsi/fsi-master.h b/drivers/fsi/fsi-master.h
index cd6bee5e12a7..4762315a46ba 100644
--- a/drivers/fsi/fsi-master.h
+++ b/drivers/fsi/fsi-master.h
@@ -51,7 +51,7 @@
#define FSI_MMODE_CRS1SHFT 8 /* Clk rate selection 1 shift */
#define FSI_MMODE_CRS1MASK 0x3ff /* Clk rate selection 1 mask */
-/* MRESB: Reset brindge */
+/* MRESB: Reset bridge */
#define FSI_MRESB_RST_GEN 0x80000000 /* General reset */
#define FSI_MRESB_RST_ERR 0x40000000 /* Error Reset */
diff --git a/drivers/fsi/fsi-occ.c b/drivers/fsi/fsi-occ.c
index c9cc75fbdfb9..abdd37d5507f 100644
--- a/drivers/fsi/fsi-occ.c
+++ b/drivers/fsi/fsi-occ.c
@@ -44,6 +44,7 @@ struct occ {
struct device *sbefifo;
char name[32];
int idx;
+ bool platform_hwmon;
u8 sequence_number;
void *buffer;
void *client_buffer;
@@ -94,6 +95,7 @@ static int occ_open(struct inode *inode, struct file *file)
client->occ = occ;
mutex_init(&client->lock);
file->private_data = client;
+ get_device(occ->dev);
/* We allocate a 1-page buffer, make sure it all fits */
BUILD_BUG_ON((OCC_CMD_DATA_BYTES + 3) > PAGE_SIZE);
@@ -197,6 +199,7 @@ static int occ_release(struct inode *inode, struct file *file)
{
struct occ_client *client = file->private_data;
+ put_device(client->occ->dev);
free_page((unsigned long)client->buffer);
kfree(client);
@@ -246,7 +249,7 @@ static int occ_verify_checksum(struct occ *occ, struct occ_response *resp,
if (checksum != checksum_resp) {
dev_err(occ->dev, "Bad checksum: %04x!=%04x\n", checksum,
checksum_resp);
- return -EBADMSG;
+ return -EBADE;
}
return 0;
@@ -493,12 +496,19 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len,
for (i = 1; i < req_len - 2; ++i)
checksum += byte_request[i];
- mutex_lock(&occ->occ_lock);
+ rc = mutex_lock_interruptible(&occ->occ_lock);
+ if (rc)
+ return rc;
occ->client_buffer = response;
occ->client_buffer_size = user_resp_len;
occ->client_response_size = 0;
+ if (!occ->buffer) {
+ rc = -ENOENT;
+ goto done;
+ }
+
/*
* Get a sequence number and update the counter. Avoid a sequence
* number of 0 which would pass the response check below even if the
@@ -575,8 +585,11 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len,
dev_dbg(dev, "resp_status=%02x resp_data_len=%d\n",
resp->return_status, resp_data_length);
- occ->client_response_size = resp_data_length + 7;
rc = occ_verify_checksum(occ, resp, resp_data_length);
+ if (rc)
+ goto done;
+
+ occ->client_response_size = resp_data_length + 7;
done:
*resp_len = occ->client_response_size;
@@ -586,7 +599,7 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len,
}
EXPORT_SYMBOL_GPL(fsi_occ_submit);
-static int occ_unregister_child(struct device *dev, void *data)
+static int occ_unregister_platform_child(struct device *dev, void *data)
{
struct platform_device *hwmon_dev = to_platform_device(dev);
@@ -595,12 +608,25 @@ static int occ_unregister_child(struct device *dev, void *data)
return 0;
}
+static int occ_unregister_of_child(struct device *dev, void *data)
+{
+ struct platform_device *hwmon_dev = to_platform_device(dev);
+
+ of_device_unregister(hwmon_dev);
+ if (dev->of_node)
+ of_node_clear_flag(dev->of_node, OF_POPULATED);
+
+ return 0;
+}
+
static int occ_probe(struct platform_device *pdev)
{
int rc;
u32 reg;
+ char child_name[32];
struct occ *occ;
- struct platform_device *hwmon_dev;
+ struct platform_device *hwmon_dev = NULL;
+ struct device_node *hwmon_node;
struct device *dev = &pdev->dev;
struct platform_device_info hwmon_dev_info = {
.parent = dev,
@@ -659,10 +685,20 @@ static int occ_probe(struct platform_device *pdev)
return rc;
}
- hwmon_dev_info.id = occ->idx;
- hwmon_dev = platform_device_register_full(&hwmon_dev_info);
- if (IS_ERR(hwmon_dev))
- dev_warn(dev, "failed to create hwmon device\n");
+ hwmon_node = of_get_child_by_name(dev->of_node, hwmon_dev_info.name);
+ if (hwmon_node) {
+ snprintf(child_name, sizeof(child_name), "%s.%d", hwmon_dev_info.name, occ->idx);
+ hwmon_dev = of_platform_device_create(hwmon_node, child_name, dev);
+ of_node_put(hwmon_node);
+ }
+
+ if (!hwmon_dev) {
+ occ->platform_hwmon = true;
+ hwmon_dev_info.id = occ->idx;
+ hwmon_dev = platform_device_register_full(&hwmon_dev_info);
+ if (IS_ERR(hwmon_dev))
+ dev_warn(dev, "failed to create hwmon device\n");
+ }
return 0;
}
@@ -671,11 +707,17 @@ static int occ_remove(struct platform_device *pdev)
{
struct occ *occ = platform_get_drvdata(pdev);
- kvfree(occ->buffer);
-
misc_deregister(&occ->mdev);
- device_for_each_child(&pdev->dev, NULL, occ_unregister_child);
+ mutex_lock(&occ->occ_lock);
+ kvfree(occ->buffer);
+ occ->buffer = NULL;
+ mutex_unlock(&occ->occ_lock);
+
+ if (occ->platform_hwmon)
+ device_for_each_child(&pdev->dev, NULL, occ_unregister_platform_child);
+ else
+ device_for_each_child(&pdev->dev, NULL, occ_unregister_of_child);
ida_simple_remove(&occ_ida, occ->idx);
diff --git a/drivers/fsi/fsi-sbefifo.c b/drivers/fsi/fsi-sbefifo.c
index f52a912cdf16..5f93a53846aa 100644
--- a/drivers/fsi/fsi-sbefifo.c
+++ b/drivers/fsi/fsi-sbefifo.c
@@ -477,7 +477,8 @@ static int sbefifo_wait(struct sbefifo *sbefifo, bool up,
if (!ready) {
sysfs_notify(&sbefifo->dev.kobj, NULL, dev_attr_timeout.attr.name);
sbefifo->timed_out = true;
- dev_err(dev, "%s FIFO Timeout ! status=%08x\n", up ? "UP" : "DOWN", sts);
+ dev_err(dev, "%s FIFO Timeout (%u ms)! status=%08x\n",
+ up ? "UP" : "DOWN", jiffies_to_msecs(timeout), sts);
return -ETIMEDOUT;
}
dev_vdbg(dev, "End of wait status: %08x\n", sts);
@@ -497,8 +498,8 @@ static int sbefifo_send_command(struct sbefifo *sbefifo,
u32 status;
int rc;
- dev_vdbg(dev, "sending command (%zd words, cmd=%04x)\n",
- cmd_len, be32_to_cpu(command[1]));
+ dev_dbg(dev, "sending command (%zd words, cmd=%04x)\n",
+ cmd_len, be32_to_cpu(command[1]));
/* As long as there's something to send */
timeout = msecs_to_jiffies(SBEFIFO_TIMEOUT_START_CMD);
@@ -551,21 +552,23 @@ static int sbefifo_read_response(struct sbefifo *sbefifo, struct iov_iter *respo
size_t len;
int rc;
- dev_vdbg(dev, "reading response, buflen = %zd\n", iov_iter_count(response));
+ dev_dbg(dev, "reading response, buflen = %zd\n", iov_iter_count(response));
timeout = msecs_to_jiffies(sbefifo->timeout_start_rsp_ms);
for (;;) {
/* Grab FIFO status (this will handle parity errors) */
rc = sbefifo_wait(sbefifo, false, &status, timeout);
- if (rc < 0)
+ if (rc < 0) {
+ dev_dbg(dev, "timeout waiting (%u ms)\n", jiffies_to_msecs(timeout));
return rc;
+ }
timeout = msecs_to_jiffies(SBEFIFO_TIMEOUT_IN_RSP);
/* Decode status */
len = sbefifo_populated(status);
eot_set = sbefifo_eot_set(status);
- dev_vdbg(dev, " chunk size %zd eot_set=0x%x\n", len, eot_set);
+ dev_dbg(dev, " chunk size %zd eot_set=0x%x\n", len, eot_set);
/* Go through the chunk */
while(len--) {
diff --git a/drivers/gnss/core.c b/drivers/gnss/core.c
index e6f94501cb28..1e82b7967570 100644
--- a/drivers/gnss/core.c
+++ b/drivers/gnss/core.c
@@ -217,7 +217,7 @@ static void gnss_device_release(struct device *dev)
kfree(gdev->write_buf);
kfifo_free(&gdev->read_fifo);
- ida_simple_remove(&gnss_minors, gdev->id);
+ ida_free(&gnss_minors, gdev->id);
kfree(gdev);
}
@@ -232,7 +232,7 @@ struct gnss_device *gnss_allocate_device(struct device *parent)
if (!gdev)
return NULL;
- id = ida_simple_get(&gnss_minors, 0, GNSS_MINORS, GFP_KERNEL);
+ id = ida_alloc_max(&gnss_minors, GNSS_MINORS - 1, GFP_KERNEL);
if (id < 0) {
kfree(gdev);
return NULL;
diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c
index 45407b12db4b..dd690f700d49 100644
--- a/drivers/hwmon/occ/common.c
+++ b/drivers/hwmon/occ/common.c
@@ -10,6 +10,7 @@
#include <linux/math64.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/property.h>
#include <linux/sysfs.h>
#include <asm/unaligned.h>
@@ -1216,8 +1217,16 @@ int occ_setup(struct occ *occ)
occ->groups[0] = &occ->group;
rc = occ_setup_sysfs(occ);
- if (rc)
+ if (rc) {
dev_err(occ->bus_dev, "failed to setup sysfs: %d\n", rc);
+ return rc;
+ }
+
+ if (!device_property_read_bool(occ->bus_dev, "ibm,no-poll-on-init")) {
+ rc = occ_active(occ, true);
+ if (rc)
+ occ_shutdown_sysfs(occ);
+ }
return rc;
}
diff --git a/drivers/hwmon/occ/p9_sbe.c b/drivers/hwmon/occ/p9_sbe.c
index c1e0a1d96cd4..96521363b696 100644
--- a/drivers/hwmon/occ/p9_sbe.c
+++ b/drivers/hwmon/occ/p9_sbe.c
@@ -7,6 +7,7 @@
#include <linux/fsi-occ.h>
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/string.h>
@@ -14,6 +15,8 @@
#include "common.h"
+#define OCC_CHECKSUM_RETRIES 3
+
struct p9_sbe_occ {
struct occ occ;
bool sbe_error;
@@ -80,18 +83,23 @@ done:
static int p9_sbe_occ_send_cmd(struct occ *occ, u8 *cmd, size_t len,
void *resp, size_t resp_len)
{
+ size_t original_resp_len = resp_len;
struct p9_sbe_occ *ctx = to_p9_sbe_occ(occ);
- int rc;
+ int rc, i;
- rc = fsi_occ_submit(ctx->sbe, cmd, len, resp, &resp_len);
- if (rc < 0) {
+ for (i = 0; i < OCC_CHECKSUM_RETRIES; ++i) {
+ rc = fsi_occ_submit(ctx->sbe, cmd, len, resp, &resp_len);
+ if (rc >= 0)
+ break;
if (resp_len) {
if (p9_sbe_occ_save_ffdc(ctx, resp, resp_len))
sysfs_notify(&occ->bus_dev->kobj, NULL,
bin_attr_ffdc.attr.name);
+ return rc;
}
-
- return rc;
+ if (rc != -EBADE)
+ return rc;
+ resp_len = original_resp_len;
}
switch (((struct occ_response *)resp)->return_status) {
@@ -174,9 +182,17 @@ static int p9_sbe_occ_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id p9_sbe_occ_of_match[] = {
+ { .compatible = "ibm,p9-occ-hwmon" },
+ { .compatible = "ibm,p10-occ-hwmon" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, p9_sbe_occ_of_match);
+
static struct platform_driver p9_sbe_occ_driver = {
.driver = {
.name = "occ-hwmon",
+ .of_match_table = p9_sbe_occ_of_match,
},
.probe = p9_sbe_occ_probe,
.remove = p9_sbe_occ_remove,
diff --git a/drivers/hwtracing/Kconfig b/drivers/hwtracing/Kconfig
index 13085835a636..911ee977103c 100644
--- a/drivers/hwtracing/Kconfig
+++ b/drivers/hwtracing/Kconfig
@@ -5,4 +5,6 @@ source "drivers/hwtracing/stm/Kconfig"
source "drivers/hwtracing/intel_th/Kconfig"
+source "drivers/hwtracing/ptt/Kconfig"
+
endmenu
diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
index 514a9b8086e3..45c1eb5dfcb7 100644
--- a/drivers/hwtracing/coresight/Kconfig
+++ b/drivers/hwtracing/coresight/Kconfig
@@ -193,10 +193,10 @@ config CORESIGHT_TRBE
depends on ARM64 && CORESIGHT_SOURCE_ETM4X
help
This driver provides support for percpu Trace Buffer Extension (TRBE).
- TRBE always needs to be used along with it's corresponding percpu ETE
+ TRBE always needs to be used along with its corresponding percpu ETE
component. ETE generates trace data which is then captured with TRBE.
Unlike traditional sink devices, TRBE is a CPU feature accessible via
- system registers. But it's explicit dependency with trace unit (ETE)
+ system registers. But its explicit dependency with trace unit (ETE)
requires it to be plugged in as a coresight sink device.
To compile this driver as a module, choose M here: the module will be
diff --git a/drivers/hwtracing/coresight/coresight-catu.c b/drivers/hwtracing/coresight/coresight-catu.c
index e0740c6dbd54..bc90a03f478f 100644
--- a/drivers/hwtracing/coresight/coresight-catu.c
+++ b/drivers/hwtracing/coresight/coresight-catu.c
@@ -365,26 +365,15 @@ static const struct etr_buf_operations etr_catu_buf_ops = {
.get_data = catu_get_data_etr_buf,
};
-coresight_simple_reg32(struct catu_drvdata, devid, CORESIGHT_DEVID);
-coresight_simple_reg32(struct catu_drvdata, control, CATU_CONTROL);
-coresight_simple_reg32(struct catu_drvdata, status, CATU_STATUS);
-coresight_simple_reg32(struct catu_drvdata, mode, CATU_MODE);
-coresight_simple_reg32(struct catu_drvdata, axictrl, CATU_AXICTRL);
-coresight_simple_reg32(struct catu_drvdata, irqen, CATU_IRQEN);
-coresight_simple_reg64(struct catu_drvdata, sladdr,
- CATU_SLADDRLO, CATU_SLADDRHI);
-coresight_simple_reg64(struct catu_drvdata, inaddr,
- CATU_INADDRLO, CATU_INADDRHI);
-
static struct attribute *catu_mgmt_attrs[] = {
- &dev_attr_devid.attr,
- &dev_attr_control.attr,
- &dev_attr_status.attr,
- &dev_attr_mode.attr,
- &dev_attr_axictrl.attr,
- &dev_attr_irqen.attr,
- &dev_attr_sladdr.attr,
- &dev_attr_inaddr.attr,
+ coresight_simple_reg32(devid, CORESIGHT_DEVID),
+ coresight_simple_reg32(control, CATU_CONTROL),
+ coresight_simple_reg32(status, CATU_STATUS),
+ coresight_simple_reg32(mode, CATU_MODE),
+ coresight_simple_reg32(axictrl, CATU_AXICTRL),
+ coresight_simple_reg32(irqen, CATU_IRQEN),
+ coresight_simple_reg64(sladdr, CATU_SLADDRLO, CATU_SLADDRHI),
+ coresight_simple_reg64(inaddr, CATU_INADDRLO, CATU_INADDRHI),
NULL,
};
diff --git a/drivers/hwtracing/coresight/coresight-catu.h b/drivers/hwtracing/coresight/coresight-catu.h
index 6160c2d75a56..442e034bbfba 100644
--- a/drivers/hwtracing/coresight/coresight-catu.h
+++ b/drivers/hwtracing/coresight/coresight-catu.h
@@ -70,24 +70,24 @@ struct catu_drvdata {
static inline u32 \
catu_read_##name(struct catu_drvdata *drvdata) \
{ \
- return coresight_read_reg_pair(drvdata->base, offset, -1); \
+ return csdev_access_relaxed_read32(&drvdata->csdev->access, offset); \
} \
static inline void \
catu_write_##name(struct catu_drvdata *drvdata, u32 val) \
{ \
- coresight_write_reg_pair(drvdata->base, val, offset, -1); \
+ csdev_access_relaxed_write32(&drvdata->csdev->access, val, offset); \
}
#define CATU_REG_PAIR(name, lo_off, hi_off) \
static inline u64 \
catu_read_##name(struct catu_drvdata *drvdata) \
{ \
- return coresight_read_reg_pair(drvdata->base, lo_off, hi_off); \
+ return csdev_access_relaxed_read_pair(&drvdata->csdev->access, lo_off, hi_off); \
} \
static inline void \
catu_write_##name(struct catu_drvdata *drvdata, u64 val) \
{ \
- coresight_write_reg_pair(drvdata->base, val, lo_off, hi_off); \
+ csdev_access_relaxed_write_pair(&drvdata->csdev->access, val, lo_off, hi_off); \
}
CATU_REG32(control, CATU_CONTROL);
diff --git a/drivers/hwtracing/coresight/coresight-core.c b/drivers/hwtracing/coresight/coresight-core.c
index 1edfec1e9d18..d5dbc67bacb4 100644
--- a/drivers/hwtracing/coresight/coresight-core.c
+++ b/drivers/hwtracing/coresight/coresight-core.c
@@ -60,6 +60,34 @@ EXPORT_SYMBOL_GPL(coresight_barrier_pkt);
static const struct cti_assoc_op *cti_assoc_ops;
+ssize_t coresight_simple_show_pair(struct device *_dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct coresight_device *csdev = container_of(_dev, struct coresight_device, dev);
+ struct cs_pair_attribute *cs_attr = container_of(attr, struct cs_pair_attribute, attr);
+ u64 val;
+
+ pm_runtime_get_sync(_dev->parent);
+ val = csdev_access_relaxed_read_pair(&csdev->access, cs_attr->lo_off, cs_attr->hi_off);
+ pm_runtime_put_sync(_dev->parent);
+ return sysfs_emit(buf, "0x%llx\n", val);
+}
+EXPORT_SYMBOL_GPL(coresight_simple_show_pair);
+
+ssize_t coresight_simple_show32(struct device *_dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct coresight_device *csdev = container_of(_dev, struct coresight_device, dev);
+ struct cs_off_attribute *cs_attr = container_of(attr, struct cs_off_attribute, attr);
+ u64 val;
+
+ pm_runtime_get_sync(_dev->parent);
+ val = csdev_access_relaxed_read32(&csdev->access, cs_attr->off);
+ pm_runtime_put_sync(_dev->parent);
+ return sysfs_emit(buf, "0x%llx\n", val);
+}
+EXPORT_SYMBOL_GPL(coresight_simple_show32);
+
void coresight_set_cti_ops(const struct cti_assoc_op *cti_op)
{
cti_assoc_ops = cti_op;
diff --git a/drivers/hwtracing/coresight/coresight-cti-sysfs.c b/drivers/hwtracing/coresight/coresight-cti-sysfs.c
index 7ff7e7780bbf..6d59c815ecf5 100644
--- a/drivers/hwtracing/coresight/coresight-cti-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-cti-sysfs.c
@@ -163,48 +163,82 @@ static struct attribute *coresight_cti_attrs[] = {
/* register based attributes */
-/* macro to access RO registers with power check only (no enable check). */
-#define coresight_cti_reg(name, offset) \
-static ssize_t name##_show(struct device *dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); \
- u32 val = 0; \
- pm_runtime_get_sync(dev->parent); \
- spin_lock(&drvdata->spinlock); \
- if (drvdata->config.hw_powered) \
- val = readl_relaxed(drvdata->base + offset); \
- spin_unlock(&drvdata->spinlock); \
- pm_runtime_put_sync(dev->parent); \
- return sprintf(buf, "0x%x\n", val); \
-} \
-static DEVICE_ATTR_RO(name)
+/* Read registers with power check only (no enable check). */
+static ssize_t coresight_cti_reg_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ struct cs_off_attribute *cti_attr = container_of(attr, struct cs_off_attribute, attr);
+ u32 val = 0;
-/* coresight management registers */
-coresight_cti_reg(devaff0, CTIDEVAFF0);
-coresight_cti_reg(devaff1, CTIDEVAFF1);
-coresight_cti_reg(authstatus, CORESIGHT_AUTHSTATUS);
-coresight_cti_reg(devarch, CORESIGHT_DEVARCH);
-coresight_cti_reg(devid, CORESIGHT_DEVID);
-coresight_cti_reg(devtype, CORESIGHT_DEVTYPE);
-coresight_cti_reg(pidr0, CORESIGHT_PERIPHIDR0);
-coresight_cti_reg(pidr1, CORESIGHT_PERIPHIDR1);
-coresight_cti_reg(pidr2, CORESIGHT_PERIPHIDR2);
-coresight_cti_reg(pidr3, CORESIGHT_PERIPHIDR3);
-coresight_cti_reg(pidr4, CORESIGHT_PERIPHIDR4);
+ pm_runtime_get_sync(dev->parent);
+ spin_lock(&drvdata->spinlock);
+ if (drvdata->config.hw_powered)
+ val = readl_relaxed(drvdata->base + cti_attr->off);
+ spin_unlock(&drvdata->spinlock);
+ pm_runtime_put_sync(dev->parent);
+ return sysfs_emit(buf, "0x%x\n", val);
+}
+/* Write registers with power check only (no enable check). */
+static __maybe_unused ssize_t coresight_cti_reg_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
+ struct cs_off_attribute *cti_attr = container_of(attr, struct cs_off_attribute, attr);
+ unsigned long val = 0;
+
+ if (kstrtoul(buf, 0, &val))
+ return -EINVAL;
+
+ pm_runtime_get_sync(dev->parent);
+ spin_lock(&drvdata->spinlock);
+ if (drvdata->config.hw_powered)
+ cti_write_single_reg(drvdata, cti_attr->off, val);
+ spin_unlock(&drvdata->spinlock);
+ pm_runtime_put_sync(dev->parent);
+ return size;
+}
+
+#define coresight_cti_reg(name, offset) \
+ (&((struct cs_off_attribute[]) { \
+ { \
+ __ATTR(name, 0444, coresight_cti_reg_show, NULL), \
+ offset \
+ } \
+ })[0].attr.attr)
+
+#define coresight_cti_reg_rw(name, offset) \
+ (&((struct cs_off_attribute[]) { \
+ { \
+ __ATTR(name, 0644, coresight_cti_reg_show, \
+ coresight_cti_reg_store), \
+ offset \
+ } \
+ })[0].attr.attr)
+
+#define coresight_cti_reg_wo(name, offset) \
+ (&((struct cs_off_attribute[]) { \
+ { \
+ __ATTR(name, 0200, NULL, coresight_cti_reg_store), \
+ offset \
+ } \
+ })[0].attr.attr)
+
+/* coresight management registers */
static struct attribute *coresight_cti_mgmt_attrs[] = {
- &dev_attr_devaff0.attr,
- &dev_attr_devaff1.attr,
- &dev_attr_authstatus.attr,
- &dev_attr_devarch.attr,
- &dev_attr_devid.attr,
- &dev_attr_devtype.attr,
- &dev_attr_pidr0.attr,
- &dev_attr_pidr1.attr,
- &dev_attr_pidr2.attr,
- &dev_attr_pidr3.attr,
- &dev_attr_pidr4.attr,
+ coresight_cti_reg(devaff0, CTIDEVAFF0),
+ coresight_cti_reg(devaff1, CTIDEVAFF1),
+ coresight_cti_reg(authstatus, CORESIGHT_AUTHSTATUS),
+ coresight_cti_reg(devarch, CORESIGHT_DEVARCH),
+ coresight_cti_reg(devid, CORESIGHT_DEVID),
+ coresight_cti_reg(devtype, CORESIGHT_DEVTYPE),
+ coresight_cti_reg(pidr0, CORESIGHT_PERIPHIDR0),
+ coresight_cti_reg(pidr1, CORESIGHT_PERIPHIDR1),
+ coresight_cti_reg(pidr2, CORESIGHT_PERIPHIDR2),
+ coresight_cti_reg(pidr3, CORESIGHT_PERIPHIDR3),
+ coresight_cti_reg(pidr4, CORESIGHT_PERIPHIDR4),
NULL,
};
@@ -454,86 +488,11 @@ static ssize_t apppulse_store(struct device *dev,
}
static DEVICE_ATTR_WO(apppulse);
-coresight_cti_reg(triginstatus, CTITRIGINSTATUS);
-coresight_cti_reg(trigoutstatus, CTITRIGOUTSTATUS);
-coresight_cti_reg(chinstatus, CTICHINSTATUS);
-coresight_cti_reg(choutstatus, CTICHOUTSTATUS);
-
/*
* Define CONFIG_CORESIGHT_CTI_INTEGRATION_REGS to enable the access to the
* integration control registers. Normally only used to investigate connection
* data.
*/
-#ifdef CONFIG_CORESIGHT_CTI_INTEGRATION_REGS
-
-/* macro to access RW registers with power check only (no enable check). */
-#define coresight_cti_reg_rw(name, offset) \
-static ssize_t name##_show(struct device *dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); \
- u32 val = 0; \
- pm_runtime_get_sync(dev->parent); \
- spin_lock(&drvdata->spinlock); \
- if (drvdata->config.hw_powered) \
- val = readl_relaxed(drvdata->base + offset); \
- spin_unlock(&drvdata->spinlock); \
- pm_runtime_put_sync(dev->parent); \
- return sprintf(buf, "0x%x\n", val); \
-} \
- \
-static ssize_t name##_store(struct device *dev, \
- struct device_attribute *attr, \
- const char *buf, size_t size) \
-{ \
- struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); \
- unsigned long val = 0; \
- if (kstrtoul(buf, 0, &val)) \
- return -EINVAL; \
- \
- pm_runtime_get_sync(dev->parent); \
- spin_lock(&drvdata->spinlock); \
- if (drvdata->config.hw_powered) \
- cti_write_single_reg(drvdata, offset, val); \
- spin_unlock(&drvdata->spinlock); \
- pm_runtime_put_sync(dev->parent); \
- return size; \
-} \
-static DEVICE_ATTR_RW(name)
-
-/* macro to access WO registers with power check only (no enable check). */
-#define coresight_cti_reg_wo(name, offset) \
-static ssize_t name##_store(struct device *dev, \
- struct device_attribute *attr, \
- const char *buf, size_t size) \
-{ \
- struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent); \
- unsigned long val = 0; \
- if (kstrtoul(buf, 0, &val)) \
- return -EINVAL; \
- \
- pm_runtime_get_sync(dev->parent); \
- spin_lock(&drvdata->spinlock); \
- if (drvdata->config.hw_powered) \
- cti_write_single_reg(drvdata, offset, val); \
- spin_unlock(&drvdata->spinlock); \
- pm_runtime_put_sync(dev->parent); \
- return size; \
-} \
-static DEVICE_ATTR_WO(name)
-
-coresight_cti_reg_rw(itchout, ITCHOUT);
-coresight_cti_reg_rw(ittrigout, ITTRIGOUT);
-coresight_cti_reg_rw(itctrl, CORESIGHT_ITCTRL);
-coresight_cti_reg_wo(itchinack, ITCHINACK);
-coresight_cti_reg_wo(ittriginack, ITTRIGINACK);
-coresight_cti_reg(ittrigin, ITTRIGIN);
-coresight_cti_reg(itchin, ITCHIN);
-coresight_cti_reg(itchoutack, ITCHOUTACK);
-coresight_cti_reg(ittrigoutack, ITTRIGOUTACK);
-
-#endif /* CORESIGHT_CTI_INTEGRATION_REGS */
-
static struct attribute *coresight_cti_regs_attrs[] = {
&dev_attr_inout_sel.attr,
&dev_attr_inen.attr,
@@ -544,20 +503,20 @@ static struct attribute *coresight_cti_regs_attrs[] = {
&dev_attr_appset.attr,
&dev_attr_appclear.attr,
&dev_attr_apppulse.attr,
- &dev_attr_triginstatus.attr,
- &dev_attr_trigoutstatus.attr,
- &dev_attr_chinstatus.attr,
- &dev_attr_choutstatus.attr,
+ coresight_cti_reg(triginstatus, CTITRIGINSTATUS),
+ coresight_cti_reg(trigoutstatus, CTITRIGOUTSTATUS),
+ coresight_cti_reg(chinstatus, CTICHINSTATUS),
+ coresight_cti_reg(choutstatus, CTICHOUTSTATUS),
#ifdef CONFIG_CORESIGHT_CTI_INTEGRATION_REGS
- &dev_attr_itctrl.attr,
- &dev_attr_ittrigin.attr,
- &dev_attr_itchin.attr,
- &dev_attr_ittrigout.attr,
- &dev_attr_itchout.attr,
- &dev_attr_itchoutack.attr,
- &dev_attr_ittrigoutack.attr,
- &dev_attr_ittriginack.attr,
- &dev_attr_itchinack.attr,
+ coresight_cti_reg_rw(itctrl, CORESIGHT_ITCTRL),
+ coresight_cti_reg(ittrigin, ITTRIGIN),
+ coresight_cti_reg(itchin, ITCHIN),
+ coresight_cti_reg_rw(ittrigout, ITTRIGOUT),
+ coresight_cti_reg_rw(itchout, ITCHOUT),
+ coresight_cti_reg(itchoutack, ITCHOUTACK),
+ coresight_cti_reg(ittrigoutack, ITTRIGOUTACK),
+ coresight_cti_reg_wo(ittriginack, ITTRIGINACK),
+ coresight_cti_reg_wo(itchinack, ITCHINACK),
#endif
NULL,
};
diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c
index efa39820acec..8aa6e4f83e42 100644
--- a/drivers/hwtracing/coresight/coresight-etb10.c
+++ b/drivers/hwtracing/coresight/coresight-etb10.c
@@ -655,27 +655,15 @@ static const struct file_operations etb_fops = {
.llseek = no_llseek,
};
-#define coresight_etb10_reg(name, offset) \
- coresight_simple_reg32(struct etb_drvdata, name, offset)
-
-coresight_etb10_reg(rdp, ETB_RAM_DEPTH_REG);
-coresight_etb10_reg(sts, ETB_STATUS_REG);
-coresight_etb10_reg(rrp, ETB_RAM_READ_POINTER);
-coresight_etb10_reg(rwp, ETB_RAM_WRITE_POINTER);
-coresight_etb10_reg(trg, ETB_TRG);
-coresight_etb10_reg(ctl, ETB_CTL_REG);
-coresight_etb10_reg(ffsr, ETB_FFSR);
-coresight_etb10_reg(ffcr, ETB_FFCR);
-
static struct attribute *coresight_etb_mgmt_attrs[] = {
- &dev_attr_rdp.attr,
- &dev_attr_sts.attr,
- &dev_attr_rrp.attr,
- &dev_attr_rwp.attr,
- &dev_attr_trg.attr,
- &dev_attr_ctl.attr,
- &dev_attr_ffsr.attr,
- &dev_attr_ffcr.attr,
+ coresight_simple_reg32(rdp, ETB_RAM_DEPTH_REG),
+ coresight_simple_reg32(sts, ETB_STATUS_REG),
+ coresight_simple_reg32(rrp, ETB_RAM_READ_POINTER),
+ coresight_simple_reg32(rwp, ETB_RAM_WRITE_POINTER),
+ coresight_simple_reg32(trg, ETB_TRG),
+ coresight_simple_reg32(ctl, ETB_CTL_REG),
+ coresight_simple_reg32(ffsr, ETB_FFSR),
+ coresight_simple_reg32(ffcr, ETB_FFCR),
NULL,
};
diff --git a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
index 68fcbf4ce7a8..fd81eca3ec18 100644
--- a/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm3x-sysfs.c
@@ -1252,31 +1252,17 @@ static struct attribute *coresight_etm_attrs[] = {
NULL,
};
-#define coresight_etm3x_reg(name, offset) \
- coresight_simple_reg32(struct etm_drvdata, name, offset)
-
-coresight_etm3x_reg(etmccr, ETMCCR);
-coresight_etm3x_reg(etmccer, ETMCCER);
-coresight_etm3x_reg(etmscr, ETMSCR);
-coresight_etm3x_reg(etmidr, ETMIDR);
-coresight_etm3x_reg(etmcr, ETMCR);
-coresight_etm3x_reg(etmtraceidr, ETMTRACEIDR);
-coresight_etm3x_reg(etmteevr, ETMTEEVR);
-coresight_etm3x_reg(etmtssvr, ETMTSSCR);
-coresight_etm3x_reg(etmtecr1, ETMTECR1);
-coresight_etm3x_reg(etmtecr2, ETMTECR2);
-
static struct attribute *coresight_etm_mgmt_attrs[] = {
- &dev_attr_etmccr.attr,
- &dev_attr_etmccer.attr,
- &dev_attr_etmscr.attr,
- &dev_attr_etmidr.attr,
- &dev_attr_etmcr.attr,
- &dev_attr_etmtraceidr.attr,
- &dev_attr_etmteevr.attr,
- &dev_attr_etmtssvr.attr,
- &dev_attr_etmtecr1.attr,
- &dev_attr_etmtecr2.attr,
+ coresight_simple_reg32(etmccr, ETMCCR),
+ coresight_simple_reg32(etmccer, ETMCCER),
+ coresight_simple_reg32(etmscr, ETMSCR),
+ coresight_simple_reg32(etmidr, ETMIDR),
+ coresight_simple_reg32(etmcr, ETMCR),
+ coresight_simple_reg32(etmtraceidr, ETMTRACEIDR),
+ coresight_simple_reg32(etmteevr, ETMTEEVR),
+ coresight_simple_reg32(etmtssvr, ETMTSSCR),
+ coresight_simple_reg32(etmtecr1, ETMTECR1),
+ coresight_simple_reg32(etmtecr2, ETMTECR2),
NULL,
};
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
index 6ea8181816fc..9cac848cffaf 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c
@@ -2306,6 +2306,34 @@ static ssize_t cpu_show(struct device *dev,
}
static DEVICE_ATTR_RO(cpu);
+static ssize_t ts_source_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int val;
+ struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+ if (!drvdata->trfcr) {
+ val = -1;
+ goto out;
+ }
+
+ switch (drvdata->trfcr & TRFCR_ELx_TS_MASK) {
+ case TRFCR_ELx_TS_VIRTUAL:
+ case TRFCR_ELx_TS_GUEST_PHYSICAL:
+ case TRFCR_ELx_TS_PHYSICAL:
+ val = FIELD_GET(TRFCR_ELx_TS_MASK, drvdata->trfcr);
+ break;
+ default:
+ val = -1;
+ break;
+ }
+
+out:
+ return sysfs_emit(buf, "%d\n", val);
+}
+static DEVICE_ATTR_RO(ts_source);
+
static struct attribute *coresight_etmv4_attrs[] = {
&dev_attr_nr_pe_cmp.attr,
&dev_attr_nr_addr_cmp.attr,
@@ -2360,6 +2388,7 @@ static struct attribute *coresight_etmv4_attrs[] = {
&dev_attr_vmid_val.attr,
&dev_attr_vmid_masks.attr,
&dev_attr_cpu.attr,
+ &dev_attr_ts_source.attr,
NULL,
};
diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h
index ff1dd2092ac5..595ce5862056 100644
--- a/drivers/hwtracing/coresight/coresight-priv.h
+++ b/drivers/hwtracing/coresight/coresight-priv.h
@@ -39,32 +39,37 @@
#define ETM_MODE_EXCL_KERN BIT(30)
#define ETM_MODE_EXCL_USER BIT(31)
+struct cs_pair_attribute {
+ struct device_attribute attr;
+ u32 lo_off;
+ u32 hi_off;
+};
+
+struct cs_off_attribute {
+ struct device_attribute attr;
+ u32 off;
+};
-typedef u32 (*coresight_read_fn)(const struct device *, u32 offset);
-#define __coresight_simple_func(type, func, name, lo_off, hi_off) \
-static ssize_t name##_show(struct device *_dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- type *drvdata = dev_get_drvdata(_dev->parent); \
- coresight_read_fn fn = func; \
- u64 val; \
- pm_runtime_get_sync(_dev->parent); \
- if (fn) \
- val = (u64)fn(_dev->parent, lo_off); \
- else \
- val = coresight_read_reg_pair(drvdata->base, \
- lo_off, hi_off); \
- pm_runtime_put_sync(_dev->parent); \
- return scnprintf(buf, PAGE_SIZE, "0x%llx\n", val); \
-} \
-static DEVICE_ATTR_RO(name)
-
-#define coresight_simple_func(type, func, name, offset) \
- __coresight_simple_func(type, func, name, offset, -1)
-#define coresight_simple_reg32(type, name, offset) \
- __coresight_simple_func(type, NULL, name, offset, -1)
-#define coresight_simple_reg64(type, name, lo_off, hi_off) \
- __coresight_simple_func(type, NULL, name, lo_off, hi_off)
+extern ssize_t coresight_simple_show32(struct device *_dev,
+ struct device_attribute *attr, char *buf);
+extern ssize_t coresight_simple_show_pair(struct device *_dev,
+ struct device_attribute *attr, char *buf);
+
+#define coresight_simple_reg32(name, offset) \
+ (&((struct cs_off_attribute[]) { \
+ { \
+ __ATTR(name, 0444, coresight_simple_show32, NULL), \
+ offset \
+ } \
+ })[0].attr.attr)
+
+#define coresight_simple_reg64(name, lo_off, hi_off) \
+ (&((struct cs_pair_attribute[]) { \
+ { \
+ __ATTR(name, 0444, coresight_simple_show_pair, NULL), \
+ lo_off, hi_off \
+ } \
+ })[0].attr.attr)
extern const u32 coresight_barrier_pkt[4];
#define CORESIGHT_BARRIER_PKT_SIZE (sizeof(coresight_barrier_pkt))
@@ -127,25 +132,6 @@ static inline void CS_UNLOCK(void __iomem *addr)
} while (0);
}
-static inline u64
-coresight_read_reg_pair(void __iomem *addr, s32 lo_offset, s32 hi_offset)
-{
- u64 val;
-
- val = readl_relaxed(addr + lo_offset);
- val |= (hi_offset < 0) ? 0 :
- (u64)readl_relaxed(addr + hi_offset) << 32;
- return val;
-}
-
-static inline void coresight_write_reg_pair(void __iomem *addr, u64 val,
- s32 lo_offset, s32 hi_offset)
-{
- writel_relaxed((u32)val, addr + lo_offset);
- if (hi_offset >= 0)
- writel_relaxed((u32)(val >> 32), addr + hi_offset);
-}
-
void coresight_disable_path(struct list_head *path);
int coresight_enable_path(struct list_head *path, u32 mode, void *sink_data);
struct coresight_device *coresight_get_sink(struct list_head *path);
diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c
index b86acbc74cf0..4dd50546d7e4 100644
--- a/drivers/hwtracing/coresight/coresight-replicator.c
+++ b/drivers/hwtracing/coresight/coresight-replicator.c
@@ -196,15 +196,9 @@ static const struct coresight_ops replicator_cs_ops = {
.link_ops = &replicator_link_ops,
};
-#define coresight_replicator_reg(name, offset) \
- coresight_simple_reg32(struct replicator_drvdata, name, offset)
-
-coresight_replicator_reg(idfilter0, REPLICATOR_IDFILTER0);
-coresight_replicator_reg(idfilter1, REPLICATOR_IDFILTER1);
-
static struct attribute *replicator_mgmt_attrs[] = {
- &dev_attr_idfilter0.attr,
- &dev_attr_idfilter1.attr,
+ coresight_simple_reg32(idfilter0, REPLICATOR_IDFILTER0),
+ coresight_simple_reg32(idfilter1, REPLICATOR_IDFILTER1),
NULL,
};
diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c
index bb14a3a8a921..463f449cfb79 100644
--- a/drivers/hwtracing/coresight/coresight-stm.c
+++ b/drivers/hwtracing/coresight/coresight-stm.c
@@ -634,22 +634,6 @@ static ssize_t traceid_store(struct device *dev,
}
static DEVICE_ATTR_RW(traceid);
-#define coresight_stm_reg(name, offset) \
- coresight_simple_reg32(struct stm_drvdata, name, offset)
-
-coresight_stm_reg(tcsr, STMTCSR);
-coresight_stm_reg(tsfreqr, STMTSFREQR);
-coresight_stm_reg(syncr, STMSYNCR);
-coresight_stm_reg(sper, STMSPER);
-coresight_stm_reg(spter, STMSPTER);
-coresight_stm_reg(privmaskr, STMPRIVMASKR);
-coresight_stm_reg(spscr, STMSPSCR);
-coresight_stm_reg(spmscr, STMSPMSCR);
-coresight_stm_reg(spfeat1r, STMSPFEAT1R);
-coresight_stm_reg(spfeat2r, STMSPFEAT2R);
-coresight_stm_reg(spfeat3r, STMSPFEAT3R);
-coresight_stm_reg(devid, CORESIGHT_DEVID);
-
static struct attribute *coresight_stm_attrs[] = {
&dev_attr_hwevent_enable.attr,
&dev_attr_hwevent_select.attr,
@@ -660,18 +644,18 @@ static struct attribute *coresight_stm_attrs[] = {
};
static struct attribute *coresight_stm_mgmt_attrs[] = {
- &dev_attr_tcsr.attr,
- &dev_attr_tsfreqr.attr,
- &dev_attr_syncr.attr,
- &dev_attr_sper.attr,
- &dev_attr_spter.attr,
- &dev_attr_privmaskr.attr,
- &dev_attr_spscr.attr,
- &dev_attr_spmscr.attr,
- &dev_attr_spfeat1r.attr,
- &dev_attr_spfeat2r.attr,
- &dev_attr_spfeat3r.attr,
- &dev_attr_devid.attr,
+ coresight_simple_reg32(tcsr, STMTCSR),
+ coresight_simple_reg32(tsfreqr, STMTSFREQR),
+ coresight_simple_reg32(syncr, STMSYNCR),
+ coresight_simple_reg32(sper, STMSPER),
+ coresight_simple_reg32(spter, STMSPTER),
+ coresight_simple_reg32(privmaskr, STMPRIVMASKR),
+ coresight_simple_reg32(spscr, STMSPSCR),
+ coresight_simple_reg32(spmscr, STMSPMSCR),
+ coresight_simple_reg32(spfeat1r, STMSPFEAT1R),
+ coresight_simple_reg32(spfeat2r, STMSPFEAT2R),
+ coresight_simple_reg32(spfeat3r, STMSPFEAT3R),
+ coresight_simple_reg32(devid, CORESIGHT_DEVID),
NULL,
};
diff --git a/drivers/hwtracing/coresight/coresight-tmc-core.c b/drivers/hwtracing/coresight/coresight-tmc-core.c
index d0276af82494..07abf28ad725 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-core.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-core.c
@@ -251,41 +251,21 @@ static enum tmc_mem_intf_width tmc_get_memwidth(u32 devid)
return memwidth;
}
-#define coresight_tmc_reg(name, offset) \
- coresight_simple_reg32(struct tmc_drvdata, name, offset)
-#define coresight_tmc_reg64(name, lo_off, hi_off) \
- coresight_simple_reg64(struct tmc_drvdata, name, lo_off, hi_off)
-
-coresight_tmc_reg(rsz, TMC_RSZ);
-coresight_tmc_reg(sts, TMC_STS);
-coresight_tmc_reg(trg, TMC_TRG);
-coresight_tmc_reg(ctl, TMC_CTL);
-coresight_tmc_reg(ffsr, TMC_FFSR);
-coresight_tmc_reg(ffcr, TMC_FFCR);
-coresight_tmc_reg(mode, TMC_MODE);
-coresight_tmc_reg(pscr, TMC_PSCR);
-coresight_tmc_reg(axictl, TMC_AXICTL);
-coresight_tmc_reg(authstatus, TMC_AUTHSTATUS);
-coresight_tmc_reg(devid, CORESIGHT_DEVID);
-coresight_tmc_reg64(rrp, TMC_RRP, TMC_RRPHI);
-coresight_tmc_reg64(rwp, TMC_RWP, TMC_RWPHI);
-coresight_tmc_reg64(dba, TMC_DBALO, TMC_DBAHI);
-
static struct attribute *coresight_tmc_mgmt_attrs[] = {
- &dev_attr_rsz.attr,
- &dev_attr_sts.attr,
- &dev_attr_rrp.attr,
- &dev_attr_rwp.attr,
- &dev_attr_trg.attr,
- &dev_attr_ctl.attr,
- &dev_attr_ffsr.attr,
- &dev_attr_ffcr.attr,
- &dev_attr_mode.attr,
- &dev_attr_pscr.attr,
- &dev_attr_devid.attr,
- &dev_attr_dba.attr,
- &dev_attr_axictl.attr,
- &dev_attr_authstatus.attr,
+ coresight_simple_reg32(rsz, TMC_RSZ),
+ coresight_simple_reg32(sts, TMC_STS),
+ coresight_simple_reg64(rrp, TMC_RRP, TMC_RRPHI),
+ coresight_simple_reg64(rwp, TMC_RWP, TMC_RWPHI),
+ coresight_simple_reg32(trg, TMC_TRG),
+ coresight_simple_reg32(ctl, TMC_CTL),
+ coresight_simple_reg32(ffsr, TMC_FFSR),
+ coresight_simple_reg32(ffcr, TMC_FFCR),
+ coresight_simple_reg32(mode, TMC_MODE),
+ coresight_simple_reg32(pscr, TMC_PSCR),
+ coresight_simple_reg32(devid, CORESIGHT_DEVID),
+ coresight_simple_reg64(dba, TMC_DBALO, TMC_DBAHI),
+ coresight_simple_reg32(axictl, TMC_AXICTL),
+ coresight_simple_reg32(authstatus, TMC_AUTHSTATUS),
NULL,
};
diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h
index 6bec20a392b3..66959557cf39 100644
--- a/drivers/hwtracing/coresight/coresight-tmc.h
+++ b/drivers/hwtracing/coresight/coresight-tmc.h
@@ -282,12 +282,12 @@ ssize_t tmc_etr_get_sysfs_trace(struct tmc_drvdata *drvdata,
static inline u64 \
tmc_read_##name(struct tmc_drvdata *drvdata) \
{ \
- return coresight_read_reg_pair(drvdata->base, lo_off, hi_off); \
+ return csdev_access_relaxed_read_pair(&drvdata->csdev->access, lo_off, hi_off); \
} \
static inline void \
tmc_write_##name(struct tmc_drvdata *drvdata, u64 val) \
{ \
- coresight_write_reg_pair(drvdata->base, val, lo_off, hi_off); \
+ csdev_access_relaxed_write_pair(&drvdata->csdev->access, val, lo_off, hi_off); \
}
TMC_REG_PAIR(rrp, TMC_RRP, TMC_RRPHI)
diff --git a/drivers/hwtracing/ptt/Kconfig b/drivers/hwtracing/ptt/Kconfig
new file mode 100644
index 000000000000..6d46a09ffeb9
--- /dev/null
+++ b/drivers/hwtracing/ptt/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config HISI_PTT
+ tristate "HiSilicon PCIe Tune and Trace Device"
+ depends on ARM64 || (COMPILE_TEST && 64BIT)
+ depends on PCI && HAS_DMA && HAS_IOMEM && PERF_EVENTS
+ help
+ HiSilicon PCIe Tune and Trace device exists as a PCIe RCiEP
+ device, and it provides support for PCIe traffic tuning and
+ tracing TLP headers to the memory.
+
+ This driver can also be built as a module. If so, the module
+ will be called hisi_ptt.
diff --git a/drivers/hwtracing/ptt/Makefile b/drivers/hwtracing/ptt/Makefile
new file mode 100644
index 000000000000..908c09a98161
--- /dev/null
+++ b/drivers/hwtracing/ptt/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_HISI_PTT) += hisi_ptt.o
diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c
new file mode 100644
index 000000000000..5d5526aa60c4
--- /dev/null
+++ b/drivers/hwtracing/ptt/hisi_ptt.c
@@ -0,0 +1,1046 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for HiSilicon PCIe tune and trace device
+ *
+ * Copyright (c) 2022 HiSilicon Technologies Co., Ltd.
+ * Author: Yicong Yang <yangyicong@hisilicon.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/cpuhotplug.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iommu.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/sysfs.h>
+#include <linux/vmalloc.h>
+
+#include "hisi_ptt.h"
+
+/* Dynamic CPU hotplug state used by PTT */
+static enum cpuhp_state hisi_ptt_pmu_online;
+
+static bool hisi_ptt_wait_tuning_finish(struct hisi_ptt *hisi_ptt)
+{
+ u32 val;
+
+ return !readl_poll_timeout(hisi_ptt->iobase + HISI_PTT_TUNING_INT_STAT,
+ val, !(val & HISI_PTT_TUNING_INT_STAT_MASK),
+ HISI_PTT_WAIT_POLL_INTERVAL_US,
+ HISI_PTT_WAIT_TUNE_TIMEOUT_US);
+}
+
+static ssize_t hisi_ptt_tune_attr_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hisi_ptt *hisi_ptt = to_hisi_ptt(dev_get_drvdata(dev));
+ struct dev_ext_attribute *ext_attr;
+ struct hisi_ptt_tune_desc *desc;
+ u32 reg;
+ u16 val;
+
+ ext_attr = container_of(attr, struct dev_ext_attribute, attr);
+ desc = ext_attr->var;
+
+ mutex_lock(&hisi_ptt->tune_lock);
+
+ reg = readl(hisi_ptt->iobase + HISI_PTT_TUNING_CTRL);
+ reg &= ~(HISI_PTT_TUNING_CTRL_CODE | HISI_PTT_TUNING_CTRL_SUB);
+ reg |= FIELD_PREP(HISI_PTT_TUNING_CTRL_CODE | HISI_PTT_TUNING_CTRL_SUB,
+ desc->event_code);
+ writel(reg, hisi_ptt->iobase + HISI_PTT_TUNING_CTRL);
+
+ /* Write all 1 to indicates it's the read process */
+ writel(~0U, hisi_ptt->iobase + HISI_PTT_TUNING_DATA);
+
+ if (!hisi_ptt_wait_tuning_finish(hisi_ptt)) {
+ mutex_unlock(&hisi_ptt->tune_lock);
+ return -ETIMEDOUT;
+ }
+
+ reg = readl(hisi_ptt->iobase + HISI_PTT_TUNING_DATA);
+ reg &= HISI_PTT_TUNING_DATA_VAL_MASK;
+ val = FIELD_GET(HISI_PTT_TUNING_DATA_VAL_MASK, reg);
+
+ mutex_unlock(&hisi_ptt->tune_lock);
+ return sysfs_emit(buf, "%u\n", val);
+}
+
+static ssize_t hisi_ptt_tune_attr_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hisi_ptt *hisi_ptt = to_hisi_ptt(dev_get_drvdata(dev));
+ struct dev_ext_attribute *ext_attr;
+ struct hisi_ptt_tune_desc *desc;
+ u32 reg;
+ u16 val;
+
+ ext_attr = container_of(attr, struct dev_ext_attribute, attr);
+ desc = ext_attr->var;
+
+ if (kstrtou16(buf, 10, &val))
+ return -EINVAL;
+
+ mutex_lock(&hisi_ptt->tune_lock);
+
+ reg = readl(hisi_ptt->iobase + HISI_PTT_TUNING_CTRL);
+ reg &= ~(HISI_PTT_TUNING_CTRL_CODE | HISI_PTT_TUNING_CTRL_SUB);
+ reg |= FIELD_PREP(HISI_PTT_TUNING_CTRL_CODE | HISI_PTT_TUNING_CTRL_SUB,
+ desc->event_code);
+ writel(reg, hisi_ptt->iobase + HISI_PTT_TUNING_CTRL);
+ writel(FIELD_PREP(HISI_PTT_TUNING_DATA_VAL_MASK, val),
+ hisi_ptt->iobase + HISI_PTT_TUNING_DATA);
+
+ if (!hisi_ptt_wait_tuning_finish(hisi_ptt)) {
+ mutex_unlock(&hisi_ptt->tune_lock);
+ return -ETIMEDOUT;
+ }
+
+ mutex_unlock(&hisi_ptt->tune_lock);
+ return count;
+}
+
+#define HISI_PTT_TUNE_ATTR(_name, _val, _show, _store) \
+ static struct hisi_ptt_tune_desc _name##_desc = { \
+ .name = #_name, \
+ .event_code = (_val), \
+ }; \
+ static struct dev_ext_attribute hisi_ptt_##_name##_attr = { \
+ .attr = __ATTR(_name, 0600, _show, _store), \
+ .var = &_name##_desc, \
+ }
+
+#define HISI_PTT_TUNE_ATTR_COMMON(_name, _val) \
+ HISI_PTT_TUNE_ATTR(_name, _val, \
+ hisi_ptt_tune_attr_show, \
+ hisi_ptt_tune_attr_store)
+
+/*
+ * The value of the tuning event are composed of two parts: main event code
+ * in BIT[0,15] and subevent code in BIT[16,23]. For example, qox_tx_cpl is
+ * a subevent of 'Tx path QoS control' which for tuning the weight of Tx
+ * completion TLPs. See hisi_ptt.rst documentation for more information.
+ */
+#define HISI_PTT_TUNE_QOS_TX_CPL (0x4 | (3 << 16))
+#define HISI_PTT_TUNE_QOS_TX_NP (0x4 | (4 << 16))
+#define HISI_PTT_TUNE_QOS_TX_P (0x4 | (5 << 16))
+#define HISI_PTT_TUNE_RX_ALLOC_BUF_LEVEL (0x5 | (6 << 16))
+#define HISI_PTT_TUNE_TX_ALLOC_BUF_LEVEL (0x5 | (7 << 16))
+
+HISI_PTT_TUNE_ATTR_COMMON(qos_tx_cpl, HISI_PTT_TUNE_QOS_TX_CPL);
+HISI_PTT_TUNE_ATTR_COMMON(qos_tx_np, HISI_PTT_TUNE_QOS_TX_NP);
+HISI_PTT_TUNE_ATTR_COMMON(qos_tx_p, HISI_PTT_TUNE_QOS_TX_P);
+HISI_PTT_TUNE_ATTR_COMMON(rx_alloc_buf_level, HISI_PTT_TUNE_RX_ALLOC_BUF_LEVEL);
+HISI_PTT_TUNE_ATTR_COMMON(tx_alloc_buf_level, HISI_PTT_TUNE_TX_ALLOC_BUF_LEVEL);
+
+static struct attribute *hisi_ptt_tune_attrs[] = {
+ &hisi_ptt_qos_tx_cpl_attr.attr.attr,
+ &hisi_ptt_qos_tx_np_attr.attr.attr,
+ &hisi_ptt_qos_tx_p_attr.attr.attr,
+ &hisi_ptt_rx_alloc_buf_level_attr.attr.attr,
+ &hisi_ptt_tx_alloc_buf_level_attr.attr.attr,
+ NULL,
+};
+
+static struct attribute_group hisi_ptt_tune_group = {
+ .name = "tune",
+ .attrs = hisi_ptt_tune_attrs,
+};
+
+static u16 hisi_ptt_get_filter_val(u16 devid, bool is_port)
+{
+ if (is_port)
+ return BIT(HISI_PCIE_CORE_PORT_ID(devid & 0xff));
+
+ return devid;
+}
+
+static bool hisi_ptt_wait_trace_hw_idle(struct hisi_ptt *hisi_ptt)
+{
+ u32 val;
+
+ return !readl_poll_timeout_atomic(hisi_ptt->iobase + HISI_PTT_TRACE_STS,
+ val, val & HISI_PTT_TRACE_IDLE,
+ HISI_PTT_WAIT_POLL_INTERVAL_US,
+ HISI_PTT_WAIT_TRACE_TIMEOUT_US);
+}
+
+static void hisi_ptt_wait_dma_reset_done(struct hisi_ptt *hisi_ptt)
+{
+ u32 val;
+
+ readl_poll_timeout_atomic(hisi_ptt->iobase + HISI_PTT_TRACE_WR_STS,
+ val, !val, HISI_PTT_RESET_POLL_INTERVAL_US,
+ HISI_PTT_RESET_TIMEOUT_US);
+}
+
+static void hisi_ptt_trace_end(struct hisi_ptt *hisi_ptt)
+{
+ writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+ hisi_ptt->trace_ctrl.started = false;
+}
+
+static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt)
+{
+ struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
+ u32 val;
+ int i;
+
+ /* Check device idle before start trace */
+ if (!hisi_ptt_wait_trace_hw_idle(hisi_ptt)) {
+ pci_err(hisi_ptt->pdev, "Failed to start trace, the device is still busy\n");
+ return -EBUSY;
+ }
+
+ ctrl->started = true;
+
+ /* Reset the DMA before start tracing */
+ val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+ val |= HISI_PTT_TRACE_CTRL_RST;
+ writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+
+ hisi_ptt_wait_dma_reset_done(hisi_ptt);
+
+ val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+ val &= ~HISI_PTT_TRACE_CTRL_RST;
+ writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+
+ /* Reset the index of current buffer */
+ hisi_ptt->trace_ctrl.buf_index = 0;
+
+ /* Zero the trace buffers */
+ for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; i++)
+ memset(ctrl->trace_buf[i].addr, 0, HISI_PTT_TRACE_BUF_SIZE);
+
+ /* Clear the interrupt status */
+ writel(HISI_PTT_TRACE_INT_STAT_MASK, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
+ writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_INT_MASK);
+
+ /* Set the trace control register */
+ val = FIELD_PREP(HISI_PTT_TRACE_CTRL_TYPE_SEL, ctrl->type);
+ val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_RXTX_SEL, ctrl->direction);
+ val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_DATA_FORMAT, ctrl->format);
+ val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_TARGET_SEL, hisi_ptt->trace_ctrl.filter);
+ if (!hisi_ptt->trace_ctrl.is_port)
+ val |= HISI_PTT_TRACE_CTRL_FILTER_MODE;
+
+ /* Start the Trace */
+ val |= HISI_PTT_TRACE_CTRL_EN;
+ writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+
+ return 0;
+}
+
+static int hisi_ptt_update_aux(struct hisi_ptt *hisi_ptt, int index, bool stop)
+{
+ struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
+ struct perf_output_handle *handle = &ctrl->handle;
+ struct perf_event *event = handle->event;
+ struct hisi_ptt_pmu_buf *buf;
+ size_t size;
+ void *addr;
+
+ buf = perf_get_aux(handle);
+ if (!buf || !handle->size)
+ return -EINVAL;
+
+ addr = ctrl->trace_buf[ctrl->buf_index].addr;
+
+ /*
+ * If we're going to stop, read the size of already traced data from
+ * HISI_PTT_TRACE_WR_STS. Otherwise we're coming from the interrupt,
+ * the data size is always HISI_PTT_TRACE_BUF_SIZE.
+ */
+ if (stop) {
+ u32 reg;
+
+ reg = readl(hisi_ptt->iobase + HISI_PTT_TRACE_WR_STS);
+ size = FIELD_GET(HISI_PTT_TRACE_WR_STS_WRITE, reg);
+ } else {
+ size = HISI_PTT_TRACE_BUF_SIZE;
+ }
+
+ memcpy(buf->base + buf->pos, addr, size);
+ buf->pos += size;
+
+ /*
+ * Just commit the traced data if we're going to stop. Otherwise if the
+ * resident AUX buffer cannot contain the data of next trace buffer,
+ * apply a new one.
+ */
+ if (stop) {
+ perf_aux_output_end(handle, buf->pos);
+ } else if (buf->length - buf->pos < HISI_PTT_TRACE_BUF_SIZE) {
+ perf_aux_output_end(handle, buf->pos);
+
+ buf = perf_aux_output_begin(handle, event);
+ if (!buf)
+ return -EINVAL;
+
+ buf->pos = handle->head % buf->length;
+ if (buf->length - buf->pos < HISI_PTT_TRACE_BUF_SIZE) {
+ perf_aux_output_end(handle, 0);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static irqreturn_t hisi_ptt_isr(int irq, void *context)
+{
+ struct hisi_ptt *hisi_ptt = context;
+ u32 status, buf_idx;
+
+ status = readl(hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
+ if (!(status & HISI_PTT_TRACE_INT_STAT_MASK))
+ return IRQ_NONE;
+
+ buf_idx = ffs(status) - 1;
+
+ /* Clear the interrupt status of buffer @buf_idx */
+ writel(status, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
+
+ /*
+ * Update the AUX buffer and cache the current buffer index,
+ * as we need to know this and save the data when the trace
+ * is ended out of the interrupt handler. End the trace
+ * if the updating fails.
+ */
+ if (hisi_ptt_update_aux(hisi_ptt, buf_idx, false))
+ hisi_ptt_trace_end(hisi_ptt);
+ else
+ hisi_ptt->trace_ctrl.buf_index = (buf_idx + 1) % HISI_PTT_TRACE_BUF_CNT;
+
+ return IRQ_HANDLED;
+}
+
+static void hisi_ptt_irq_free_vectors(void *pdev)
+{
+ pci_free_irq_vectors(pdev);
+}
+
+static int hisi_ptt_register_irq(struct hisi_ptt *hisi_ptt)
+{
+ struct pci_dev *pdev = hisi_ptt->pdev;
+ int ret;
+
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
+ if (ret < 0) {
+ pci_err(pdev, "failed to allocate irq vector, ret = %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(&pdev->dev, hisi_ptt_irq_free_vectors, pdev);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_request_threaded_irq(&pdev->dev,
+ pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ),
+ NULL, hisi_ptt_isr, 0,
+ DRV_NAME, hisi_ptt);
+ if (ret) {
+ pci_err(pdev, "failed to request irq %d, ret = %d\n",
+ pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ), ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int hisi_ptt_init_filters(struct pci_dev *pdev, void *data)
+{
+ struct hisi_ptt_filter_desc *filter;
+ struct hisi_ptt *hisi_ptt = data;
+
+ /*
+ * We won't fail the probe if filter allocation failed here. The filters
+ * should be partial initialized and users would know which filter fails
+ * through the log. Other functions of PTT device are still available.
+ */
+ filter = kzalloc(sizeof(*filter), GFP_KERNEL);
+ if (!filter) {
+ pci_err(hisi_ptt->pdev, "failed to add filter %s\n", pci_name(pdev));
+ return -ENOMEM;
+ }
+
+ filter->devid = PCI_DEVID(pdev->bus->number, pdev->devfn);
+
+ if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT) {
+ filter->is_port = true;
+ list_add_tail(&filter->list, &hisi_ptt->port_filters);
+
+ /* Update the available port mask */
+ hisi_ptt->port_mask |= hisi_ptt_get_filter_val(filter->devid, true);
+ } else {
+ list_add_tail(&filter->list, &hisi_ptt->req_filters);
+ }
+
+ return 0;
+}
+
+static void hisi_ptt_release_filters(void *data)
+{
+ struct hisi_ptt_filter_desc *filter, *tmp;
+ struct hisi_ptt *hisi_ptt = data;
+
+ list_for_each_entry_safe(filter, tmp, &hisi_ptt->req_filters, list) {
+ list_del(&filter->list);
+ kfree(filter);
+ }
+
+ list_for_each_entry_safe(filter, tmp, &hisi_ptt->port_filters, list) {
+ list_del(&filter->list);
+ kfree(filter);
+ }
+}
+
+static int hisi_ptt_config_trace_buf(struct hisi_ptt *hisi_ptt)
+{
+ struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
+ struct device *dev = &hisi_ptt->pdev->dev;
+ int i;
+
+ ctrl->trace_buf = devm_kcalloc(dev, HISI_PTT_TRACE_BUF_CNT,
+ sizeof(*ctrl->trace_buf), GFP_KERNEL);
+ if (!ctrl->trace_buf)
+ return -ENOMEM;
+
+ for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; ++i) {
+ ctrl->trace_buf[i].addr = dmam_alloc_coherent(dev, HISI_PTT_TRACE_BUF_SIZE,
+ &ctrl->trace_buf[i].dma,
+ GFP_KERNEL);
+ if (!ctrl->trace_buf[i].addr)
+ return -ENOMEM;
+ }
+
+ /* Configure the trace DMA buffer */
+ for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; i++) {
+ writel(lower_32_bits(ctrl->trace_buf[i].dma),
+ hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_LO_0 +
+ i * HISI_PTT_TRACE_ADDR_STRIDE);
+ writel(upper_32_bits(ctrl->trace_buf[i].dma),
+ hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_HI_0 +
+ i * HISI_PTT_TRACE_ADDR_STRIDE);
+ }
+ writel(HISI_PTT_TRACE_BUF_SIZE, hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_SIZE);
+
+ return 0;
+}
+
+static int hisi_ptt_init_ctrls(struct hisi_ptt *hisi_ptt)
+{
+ struct pci_dev *pdev = hisi_ptt->pdev;
+ struct pci_bus *bus;
+ int ret;
+ u32 reg;
+
+ INIT_LIST_HEAD(&hisi_ptt->port_filters);
+ INIT_LIST_HEAD(&hisi_ptt->req_filters);
+
+ ret = hisi_ptt_config_trace_buf(hisi_ptt);
+ if (ret)
+ return ret;
+
+ /*
+ * The device range register provides the information about the root
+ * ports which the RCiEP can control and trace. The RCiEP and the root
+ * ports which it supports are on the same PCIe core, with same domain
+ * number but maybe different bus number. The device range register
+ * will tell us which root ports we can support, Bit[31:16] indicates
+ * the upper BDF numbers of the root port, while Bit[15:0] indicates
+ * the lower.
+ */
+ reg = readl(hisi_ptt->iobase + HISI_PTT_DEVICE_RANGE);
+ hisi_ptt->upper_bdf = FIELD_GET(HISI_PTT_DEVICE_RANGE_UPPER, reg);
+ hisi_ptt->lower_bdf = FIELD_GET(HISI_PTT_DEVICE_RANGE_LOWER, reg);
+
+ bus = pci_find_bus(pci_domain_nr(pdev->bus), PCI_BUS_NUM(hisi_ptt->upper_bdf));
+ if (bus)
+ pci_walk_bus(bus, hisi_ptt_init_filters, hisi_ptt);
+
+ ret = devm_add_action_or_reset(&pdev->dev, hisi_ptt_release_filters, hisi_ptt);
+ if (ret)
+ return ret;
+
+ hisi_ptt->trace_ctrl.on_cpu = -1;
+ return 0;
+}
+
+static ssize_t cpumask_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct hisi_ptt *hisi_ptt = to_hisi_ptt(dev_get_drvdata(dev));
+ const cpumask_t *cpumask = cpumask_of_node(dev_to_node(&hisi_ptt->pdev->dev));
+
+ return cpumap_print_to_pagebuf(true, buf, cpumask);
+}
+static DEVICE_ATTR_RO(cpumask);
+
+static struct attribute *hisi_ptt_cpumask_attrs[] = {
+ &dev_attr_cpumask.attr,
+ NULL
+};
+
+static const struct attribute_group hisi_ptt_cpumask_attr_group = {
+ .attrs = hisi_ptt_cpumask_attrs,
+};
+
+/*
+ * Bit 19 indicates the filter type, 1 for Root Port filter and 0 for Requester
+ * filter. Bit[15:0] indicates the filter value, for Root Port filter it's
+ * a bit mask of desired ports and for Requester filter it's the Requester ID
+ * of the desired PCIe function. Bit[18:16] is reserved for extension.
+ *
+ * See hisi_ptt.rst documentation for detailed information.
+ */
+PMU_FORMAT_ATTR(filter, "config:0-19");
+PMU_FORMAT_ATTR(direction, "config:20-23");
+PMU_FORMAT_ATTR(type, "config:24-31");
+PMU_FORMAT_ATTR(format, "config:32-35");
+
+static struct attribute *hisi_ptt_pmu_format_attrs[] = {
+ &format_attr_filter.attr,
+ &format_attr_direction.attr,
+ &format_attr_type.attr,
+ &format_attr_format.attr,
+ NULL
+};
+
+static struct attribute_group hisi_ptt_pmu_format_group = {
+ .name = "format",
+ .attrs = hisi_ptt_pmu_format_attrs,
+};
+
+static const struct attribute_group *hisi_ptt_pmu_groups[] = {
+ &hisi_ptt_cpumask_attr_group,
+ &hisi_ptt_pmu_format_group,
+ &hisi_ptt_tune_group,
+ NULL
+};
+
+static int hisi_ptt_trace_valid_direction(u32 val)
+{
+ /*
+ * The direction values have different effects according to the data
+ * format (specified in the parentheses). TLP set A/B means different
+ * set of TLP types. See hisi_ptt.rst documentation for more details.
+ */
+ static const u32 hisi_ptt_trace_available_direction[] = {
+ 0, /* inbound(4DW) or reserved(8DW) */
+ 1, /* outbound(4DW) */
+ 2, /* {in, out}bound(4DW) or inbound(8DW), TLP set A */
+ 3, /* {in, out}bound(4DW) or inbound(8DW), TLP set B */
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(hisi_ptt_trace_available_direction); i++) {
+ if (val == hisi_ptt_trace_available_direction[i])
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int hisi_ptt_trace_valid_type(u32 val)
+{
+ /* Different types can be set simultaneously */
+ static const u32 hisi_ptt_trace_available_type[] = {
+ 1, /* posted_request */
+ 2, /* non-posted_request */
+ 4, /* completion */
+ };
+ int i;
+
+ if (!val)
+ return -EINVAL;
+
+ /*
+ * Walk the available list and clear the valid bits of
+ * the config. If there is any resident bit after the
+ * walk then the config is invalid.
+ */
+ for (i = 0; i < ARRAY_SIZE(hisi_ptt_trace_available_type); i++)
+ val &= ~hisi_ptt_trace_available_type[i];
+
+ if (val)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int hisi_ptt_trace_valid_format(u32 val)
+{
+ static const u32 hisi_ptt_trace_availble_format[] = {
+ 0, /* 4DW */
+ 1, /* 8DW */
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(hisi_ptt_trace_availble_format); i++) {
+ if (val == hisi_ptt_trace_availble_format[i])
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int hisi_ptt_trace_valid_filter(struct hisi_ptt *hisi_ptt, u64 config)
+{
+ unsigned long val, port_mask = hisi_ptt->port_mask;
+ struct hisi_ptt_filter_desc *filter;
+
+ hisi_ptt->trace_ctrl.is_port = FIELD_GET(HISI_PTT_PMU_FILTER_IS_PORT, config);
+ val = FIELD_GET(HISI_PTT_PMU_FILTER_VAL_MASK, config);
+
+ /*
+ * Port filters are defined as bit mask. For port filters, check
+ * the bits in the @val are within the range of hisi_ptt->port_mask
+ * and whether it's empty or not, otherwise user has specified
+ * some unsupported root ports.
+ *
+ * For Requester ID filters, walk the available filter list to see
+ * whether we have one matched.
+ */
+ if (!hisi_ptt->trace_ctrl.is_port) {
+ list_for_each_entry(filter, &hisi_ptt->req_filters, list) {
+ if (val == hisi_ptt_get_filter_val(filter->devid, filter->is_port))
+ return 0;
+ }
+ } else if (bitmap_subset(&val, &port_mask, BITS_PER_LONG)) {
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static void hisi_ptt_pmu_init_configs(struct hisi_ptt *hisi_ptt, struct perf_event *event)
+{
+ struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
+ u32 val;
+
+ val = FIELD_GET(HISI_PTT_PMU_FILTER_VAL_MASK, event->attr.config);
+ hisi_ptt->trace_ctrl.filter = val;
+
+ val = FIELD_GET(HISI_PTT_PMU_DIRECTION_MASK, event->attr.config);
+ ctrl->direction = val;
+
+ val = FIELD_GET(HISI_PTT_PMU_TYPE_MASK, event->attr.config);
+ ctrl->type = val;
+
+ val = FIELD_GET(HISI_PTT_PMU_FORMAT_MASK, event->attr.config);
+ ctrl->format = val;
+}
+
+static int hisi_ptt_pmu_event_init(struct perf_event *event)
+{
+ struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu);
+ int ret;
+ u32 val;
+
+ if (event->cpu < 0) {
+ dev_dbg(event->pmu->dev, "Per-task mode not supported\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (event->attr.type != hisi_ptt->hisi_ptt_pmu.type)
+ return -ENOENT;
+
+ ret = hisi_ptt_trace_valid_filter(hisi_ptt, event->attr.config);
+ if (ret < 0)
+ return ret;
+
+ val = FIELD_GET(HISI_PTT_PMU_DIRECTION_MASK, event->attr.config);
+ ret = hisi_ptt_trace_valid_direction(val);
+ if (ret < 0)
+ return ret;
+
+ val = FIELD_GET(HISI_PTT_PMU_TYPE_MASK, event->attr.config);
+ ret = hisi_ptt_trace_valid_type(val);
+ if (ret < 0)
+ return ret;
+
+ val = FIELD_GET(HISI_PTT_PMU_FORMAT_MASK, event->attr.config);
+ return hisi_ptt_trace_valid_format(val);
+}
+
+static void *hisi_ptt_pmu_setup_aux(struct perf_event *event, void **pages,
+ int nr_pages, bool overwrite)
+{
+ struct hisi_ptt_pmu_buf *buf;
+ struct page **pagelist;
+ int i;
+
+ if (overwrite) {
+ dev_warn(event->pmu->dev, "Overwrite mode is not supported\n");
+ return NULL;
+ }
+
+ /* If the pages size less than buffers, we cannot start trace */
+ if (nr_pages < HISI_PTT_TRACE_TOTAL_BUF_SIZE / PAGE_SIZE)
+ return NULL;
+
+ buf = kzalloc(sizeof(*buf), GFP_KERNEL);
+ if (!buf)
+ return NULL;
+
+ pagelist = kcalloc(nr_pages, sizeof(*pagelist), GFP_KERNEL);
+ if (!pagelist)
+ goto err;
+
+ for (i = 0; i < nr_pages; i++)
+ pagelist[i] = virt_to_page(pages[i]);
+
+ buf->base = vmap(pagelist, nr_pages, VM_MAP, PAGE_KERNEL);
+ if (!buf->base) {
+ kfree(pagelist);
+ goto err;
+ }
+
+ buf->nr_pages = nr_pages;
+ buf->length = nr_pages * PAGE_SIZE;
+ buf->pos = 0;
+
+ kfree(pagelist);
+ return buf;
+err:
+ kfree(buf);
+ return NULL;
+}
+
+static void hisi_ptt_pmu_free_aux(void *aux)
+{
+ struct hisi_ptt_pmu_buf *buf = aux;
+
+ vunmap(buf->base);
+ kfree(buf);
+}
+
+static void hisi_ptt_pmu_start(struct perf_event *event, int flags)
+{
+ struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu);
+ struct perf_output_handle *handle = &hisi_ptt->trace_ctrl.handle;
+ struct hw_perf_event *hwc = &event->hw;
+ struct device *dev = event->pmu->dev;
+ struct hisi_ptt_pmu_buf *buf;
+ int cpu = event->cpu;
+ int ret;
+
+ hwc->state = 0;
+
+ /* Serialize the perf process if user specified several CPUs */
+ spin_lock(&hisi_ptt->pmu_lock);
+ if (hisi_ptt->trace_ctrl.started) {
+ dev_dbg(dev, "trace has already started\n");
+ goto stop;
+ }
+
+ /*
+ * Handle the interrupt on the same cpu which starts the trace to avoid
+ * context mismatch. Otherwise we'll trigger the WARN from the perf
+ * core in event_function_local(). If CPU passed is offline we'll fail
+ * here, just log it since we can do nothing here.
+ */
+ ret = irq_set_affinity(pci_irq_vector(hisi_ptt->pdev, HISI_PTT_TRACE_DMA_IRQ),
+ cpumask_of(cpu));
+ if (ret)
+ dev_warn(dev, "failed to set the affinity of trace interrupt\n");
+
+ hisi_ptt->trace_ctrl.on_cpu = cpu;
+
+ buf = perf_aux_output_begin(handle, event);
+ if (!buf) {
+ dev_dbg(dev, "aux output begin failed\n");
+ goto stop;
+ }
+
+ buf->pos = handle->head % buf->length;
+
+ hisi_ptt_pmu_init_configs(hisi_ptt, event);
+
+ ret = hisi_ptt_trace_start(hisi_ptt);
+ if (ret) {
+ dev_dbg(dev, "trace start failed, ret = %d\n", ret);
+ perf_aux_output_end(handle, 0);
+ goto stop;
+ }
+
+ spin_unlock(&hisi_ptt->pmu_lock);
+ return;
+stop:
+ event->hw.state |= PERF_HES_STOPPED;
+ spin_unlock(&hisi_ptt->pmu_lock);
+}
+
+static void hisi_ptt_pmu_stop(struct perf_event *event, int flags)
+{
+ struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (hwc->state & PERF_HES_STOPPED)
+ return;
+
+ spin_lock(&hisi_ptt->pmu_lock);
+ if (hisi_ptt->trace_ctrl.started) {
+ hisi_ptt_trace_end(hisi_ptt);
+
+ if (!hisi_ptt_wait_trace_hw_idle(hisi_ptt))
+ dev_warn(event->pmu->dev, "Device is still busy\n");
+
+ hisi_ptt_update_aux(hisi_ptt, hisi_ptt->trace_ctrl.buf_index, true);
+ }
+ spin_unlock(&hisi_ptt->pmu_lock);
+
+ hwc->state |= PERF_HES_STOPPED;
+ perf_event_update_userpage(event);
+ hwc->state |= PERF_HES_UPTODATE;
+}
+
+static int hisi_ptt_pmu_add(struct perf_event *event, int flags)
+{
+ struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int cpu = event->cpu;
+
+ /* Only allow the cpus on the device's node to add the event */
+ if (!cpumask_test_cpu(cpu, cpumask_of_node(dev_to_node(&hisi_ptt->pdev->dev))))
+ return 0;
+
+ hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+
+ if (flags & PERF_EF_START) {
+ hisi_ptt_pmu_start(event, PERF_EF_RELOAD);
+ if (hwc->state & PERF_HES_STOPPED)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void hisi_ptt_pmu_del(struct perf_event *event, int flags)
+{
+ hisi_ptt_pmu_stop(event, PERF_EF_UPDATE);
+}
+
+static void hisi_ptt_remove_cpuhp_instance(void *hotplug_node)
+{
+ cpuhp_state_remove_instance_nocalls(hisi_ptt_pmu_online, hotplug_node);
+}
+
+static void hisi_ptt_unregister_pmu(void *pmu)
+{
+ perf_pmu_unregister(pmu);
+}
+
+static int hisi_ptt_register_pmu(struct hisi_ptt *hisi_ptt)
+{
+ u16 core_id, sicl_id;
+ char *pmu_name;
+ u32 reg;
+ int ret;
+
+ ret = cpuhp_state_add_instance_nocalls(hisi_ptt_pmu_online,
+ &hisi_ptt->hotplug_node);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(&hisi_ptt->pdev->dev,
+ hisi_ptt_remove_cpuhp_instance,
+ &hisi_ptt->hotplug_node);
+ if (ret)
+ return ret;
+
+ mutex_init(&hisi_ptt->tune_lock);
+ spin_lock_init(&hisi_ptt->pmu_lock);
+
+ hisi_ptt->hisi_ptt_pmu = (struct pmu) {
+ .module = THIS_MODULE,
+ .capabilities = PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE,
+ .task_ctx_nr = perf_sw_context,
+ .attr_groups = hisi_ptt_pmu_groups,
+ .event_init = hisi_ptt_pmu_event_init,
+ .setup_aux = hisi_ptt_pmu_setup_aux,
+ .free_aux = hisi_ptt_pmu_free_aux,
+ .start = hisi_ptt_pmu_start,
+ .stop = hisi_ptt_pmu_stop,
+ .add = hisi_ptt_pmu_add,
+ .del = hisi_ptt_pmu_del,
+ };
+
+ reg = readl(hisi_ptt->iobase + HISI_PTT_LOCATION);
+ core_id = FIELD_GET(HISI_PTT_CORE_ID, reg);
+ sicl_id = FIELD_GET(HISI_PTT_SICL_ID, reg);
+
+ pmu_name = devm_kasprintf(&hisi_ptt->pdev->dev, GFP_KERNEL, "hisi_ptt%u_%u",
+ sicl_id, core_id);
+ if (!pmu_name)
+ return -ENOMEM;
+
+ ret = perf_pmu_register(&hisi_ptt->hisi_ptt_pmu, pmu_name, -1);
+ if (ret)
+ return ret;
+
+ return devm_add_action_or_reset(&hisi_ptt->pdev->dev,
+ hisi_ptt_unregister_pmu,
+ &hisi_ptt->hisi_ptt_pmu);
+}
+
+/*
+ * The DMA of PTT trace can only use direct mappings due to some
+ * hardware restriction. Check whether there is no IOMMU or the
+ * policy of the IOMMU domain is passthrough, otherwise the trace
+ * cannot work.
+ *
+ * The PTT device is supposed to behind an ARM SMMUv3, which
+ * should have passthrough the device by a quirk.
+ */
+static int hisi_ptt_check_iommu_mapping(struct pci_dev *pdev)
+{
+ struct iommu_domain *iommu_domain;
+
+ iommu_domain = iommu_get_domain_for_dev(&pdev->dev);
+ if (!iommu_domain || iommu_domain->type == IOMMU_DOMAIN_IDENTITY)
+ return 0;
+
+ return -EOPNOTSUPP;
+}
+
+static int hisi_ptt_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct hisi_ptt *hisi_ptt;
+ int ret;
+
+ ret = hisi_ptt_check_iommu_mapping(pdev);
+ if (ret) {
+ pci_err(pdev, "requires direct DMA mappings\n");
+ return ret;
+ }
+
+ hisi_ptt = devm_kzalloc(&pdev->dev, sizeof(*hisi_ptt), GFP_KERNEL);
+ if (!hisi_ptt)
+ return -ENOMEM;
+
+ hisi_ptt->pdev = pdev;
+ pci_set_drvdata(pdev, hisi_ptt);
+
+ ret = pcim_enable_device(pdev);
+ if (ret) {
+ pci_err(pdev, "failed to enable device, ret = %d\n", ret);
+ return ret;
+ }
+
+ ret = pcim_iomap_regions(pdev, BIT(2), DRV_NAME);
+ if (ret) {
+ pci_err(pdev, "failed to remap io memory, ret = %d\n", ret);
+ return ret;
+ }
+
+ hisi_ptt->iobase = pcim_iomap_table(pdev)[2];
+
+ ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+ if (ret) {
+ pci_err(pdev, "failed to set 64 bit dma mask, ret = %d\n", ret);
+ return ret;
+ }
+
+ pci_set_master(pdev);
+
+ ret = hisi_ptt_register_irq(hisi_ptt);
+ if (ret)
+ return ret;
+
+ ret = hisi_ptt_init_ctrls(hisi_ptt);
+ if (ret) {
+ pci_err(pdev, "failed to init controls, ret = %d\n", ret);
+ return ret;
+ }
+
+ ret = hisi_ptt_register_pmu(hisi_ptt);
+ if (ret) {
+ pci_err(pdev, "failed to register PMU device, ret = %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct pci_device_id hisi_ptt_id_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, 0xa12e) },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, hisi_ptt_id_tbl);
+
+static struct pci_driver hisi_ptt_driver = {
+ .name = DRV_NAME,
+ .id_table = hisi_ptt_id_tbl,
+ .probe = hisi_ptt_probe,
+};
+
+static int hisi_ptt_cpu_teardown(unsigned int cpu, struct hlist_node *node)
+{
+ struct hisi_ptt *hisi_ptt;
+ struct device *dev;
+ int target, src;
+
+ hisi_ptt = hlist_entry_safe(node, struct hisi_ptt, hotplug_node);
+ src = hisi_ptt->trace_ctrl.on_cpu;
+ dev = hisi_ptt->hisi_ptt_pmu.dev;
+
+ if (!hisi_ptt->trace_ctrl.started || src != cpu)
+ return 0;
+
+ target = cpumask_any_but(cpumask_of_node(dev_to_node(&hisi_ptt->pdev->dev)), cpu);
+ if (target >= nr_cpu_ids) {
+ dev_err(dev, "no available cpu for perf context migration\n");
+ return 0;
+ }
+
+ perf_pmu_migrate_context(&hisi_ptt->hisi_ptt_pmu, src, target);
+
+ /*
+ * Also make sure the interrupt bind to the migrated CPU as well. Warn
+ * the user on failure here.
+ */
+ if (irq_set_affinity(pci_irq_vector(hisi_ptt->pdev, HISI_PTT_TRACE_DMA_IRQ),
+ cpumask_of(target)))
+ dev_warn(dev, "failed to set the affinity of trace interrupt\n");
+
+ hisi_ptt->trace_ctrl.on_cpu = target;
+ return 0;
+}
+
+static int __init hisi_ptt_init(void)
+{
+ int ret;
+
+ ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, DRV_NAME, NULL,
+ hisi_ptt_cpu_teardown);
+ if (ret < 0)
+ return ret;
+ hisi_ptt_pmu_online = ret;
+
+ ret = pci_register_driver(&hisi_ptt_driver);
+ if (ret)
+ cpuhp_remove_multi_state(hisi_ptt_pmu_online);
+
+ return ret;
+}
+module_init(hisi_ptt_init);
+
+static void __exit hisi_ptt_exit(void)
+{
+ pci_unregister_driver(&hisi_ptt_driver);
+ cpuhp_remove_multi_state(hisi_ptt_pmu_online);
+}
+module_exit(hisi_ptt_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yicong Yang <yangyicong@hisilicon.com>");
+MODULE_DESCRIPTION("Driver for HiSilicon PCIe tune and trace device");
diff --git a/drivers/hwtracing/ptt/hisi_ptt.h b/drivers/hwtracing/ptt/hisi_ptt.h
new file mode 100644
index 000000000000..5beb1648c93a
--- /dev/null
+++ b/drivers/hwtracing/ptt/hisi_ptt.h
@@ -0,0 +1,200 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Driver for HiSilicon PCIe tune and trace device
+ *
+ * Copyright (c) 2022 HiSilicon Technologies Co., Ltd.
+ * Author: Yicong Yang <yangyicong@hisilicon.com>
+ */
+
+#ifndef _HISI_PTT_H
+#define _HISI_PTT_H
+
+#include <linux/bits.h>
+#include <linux/cpumask.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/perf_event.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#define DRV_NAME "hisi_ptt"
+
+/*
+ * The definition of the device registers and register fields.
+ */
+#define HISI_PTT_TUNING_CTRL 0x0000
+#define HISI_PTT_TUNING_CTRL_CODE GENMASK(15, 0)
+#define HISI_PTT_TUNING_CTRL_SUB GENMASK(23, 16)
+#define HISI_PTT_TUNING_DATA 0x0004
+#define HISI_PTT_TUNING_DATA_VAL_MASK GENMASK(15, 0)
+#define HISI_PTT_TRACE_ADDR_SIZE 0x0800
+#define HISI_PTT_TRACE_ADDR_BASE_LO_0 0x0810
+#define HISI_PTT_TRACE_ADDR_BASE_HI_0 0x0814
+#define HISI_PTT_TRACE_ADDR_STRIDE 0x8
+#define HISI_PTT_TRACE_CTRL 0x0850
+#define HISI_PTT_TRACE_CTRL_EN BIT(0)
+#define HISI_PTT_TRACE_CTRL_RST BIT(1)
+#define HISI_PTT_TRACE_CTRL_RXTX_SEL GENMASK(3, 2)
+#define HISI_PTT_TRACE_CTRL_TYPE_SEL GENMASK(7, 4)
+#define HISI_PTT_TRACE_CTRL_DATA_FORMAT BIT(14)
+#define HISI_PTT_TRACE_CTRL_FILTER_MODE BIT(15)
+#define HISI_PTT_TRACE_CTRL_TARGET_SEL GENMASK(31, 16)
+#define HISI_PTT_TRACE_INT_STAT 0x0890
+#define HISI_PTT_TRACE_INT_STAT_MASK GENMASK(3, 0)
+#define HISI_PTT_TRACE_INT_MASK 0x0894
+#define HISI_PTT_TUNING_INT_STAT 0x0898
+#define HISI_PTT_TUNING_INT_STAT_MASK BIT(0)
+#define HISI_PTT_TRACE_WR_STS 0x08a0
+#define HISI_PTT_TRACE_WR_STS_WRITE GENMASK(27, 0)
+#define HISI_PTT_TRACE_WR_STS_BUFFER GENMASK(29, 28)
+#define HISI_PTT_TRACE_STS 0x08b0
+#define HISI_PTT_TRACE_IDLE BIT(0)
+#define HISI_PTT_DEVICE_RANGE 0x0fe0
+#define HISI_PTT_DEVICE_RANGE_UPPER GENMASK(31, 16)
+#define HISI_PTT_DEVICE_RANGE_LOWER GENMASK(15, 0)
+#define HISI_PTT_LOCATION 0x0fe8
+#define HISI_PTT_CORE_ID GENMASK(15, 0)
+#define HISI_PTT_SICL_ID GENMASK(31, 16)
+
+/* Parameters of PTT trace DMA part. */
+#define HISI_PTT_TRACE_DMA_IRQ 0
+#define HISI_PTT_TRACE_BUF_CNT 4
+#define HISI_PTT_TRACE_BUF_SIZE SZ_4M
+#define HISI_PTT_TRACE_TOTAL_BUF_SIZE (HISI_PTT_TRACE_BUF_SIZE * \
+ HISI_PTT_TRACE_BUF_CNT)
+/* Wait time for hardware DMA to reset */
+#define HISI_PTT_RESET_TIMEOUT_US 10UL
+#define HISI_PTT_RESET_POLL_INTERVAL_US 1UL
+/* Poll timeout and interval for waiting hardware work to finish */
+#define HISI_PTT_WAIT_TUNE_TIMEOUT_US 1000000UL
+#define HISI_PTT_WAIT_TRACE_TIMEOUT_US 100UL
+#define HISI_PTT_WAIT_POLL_INTERVAL_US 10UL
+
+#define HISI_PCIE_CORE_PORT_ID(devfn) ((PCI_SLOT(devfn) & 0x7) << 1)
+
+/* Definition of the PMU configs */
+#define HISI_PTT_PMU_FILTER_IS_PORT BIT(19)
+#define HISI_PTT_PMU_FILTER_VAL_MASK GENMASK(15, 0)
+#define HISI_PTT_PMU_DIRECTION_MASK GENMASK(23, 20)
+#define HISI_PTT_PMU_TYPE_MASK GENMASK(31, 24)
+#define HISI_PTT_PMU_FORMAT_MASK GENMASK(35, 32)
+
+/**
+ * struct hisi_ptt_tune_desc - Describe tune event for PTT tune
+ * @hisi_ptt: PTT device this tune event belongs to
+ * @name: name of this event
+ * @event_code: code of the event
+ */
+struct hisi_ptt_tune_desc {
+ struct hisi_ptt *hisi_ptt;
+ const char *name;
+ u32 event_code;
+};
+
+/**
+ * struct hisi_ptt_dma_buffer - Describe a single trace buffer of PTT trace.
+ * The detail of the data format is described
+ * in the documentation of PTT device.
+ * @dma: DMA address of this buffer visible to the device
+ * @addr: virtual address of this buffer visible to the cpu
+ */
+struct hisi_ptt_dma_buffer {
+ dma_addr_t dma;
+ void *addr;
+};
+
+/**
+ * struct hisi_ptt_trace_ctrl - Control and status of PTT trace
+ * @trace_buf: array of the trace buffers for holding the trace data.
+ * the length will be HISI_PTT_TRACE_BUF_CNT.
+ * @handle: perf output handle of current trace session
+ * @buf_index: the index of current using trace buffer
+ * @on_cpu: current tracing cpu
+ * @started: current trace status, true for started
+ * @is_port: whether we're tracing root port or not
+ * @direction: direction of the TLP headers to trace
+ * @filter: filter value for tracing the TLP headers
+ * @format: format of the TLP headers to trace
+ * @type: type of the TLP headers to trace
+ */
+struct hisi_ptt_trace_ctrl {
+ struct hisi_ptt_dma_buffer *trace_buf;
+ struct perf_output_handle handle;
+ u32 buf_index;
+ int on_cpu;
+ bool started;
+ bool is_port;
+ u32 direction:2;
+ u32 filter:16;
+ u32 format:1;
+ u32 type:4;
+};
+
+/**
+ * struct hisi_ptt_filter_desc - Descriptor of the PTT trace filter
+ * @list: entry of this descriptor in the filter list
+ * @is_port: the PCI device of the filter is a Root Port or not
+ * @devid: the PCI device's devid of the filter
+ */
+struct hisi_ptt_filter_desc {
+ struct list_head list;
+ bool is_port;
+ u16 devid;
+};
+
+/**
+ * struct hisi_ptt_pmu_buf - Descriptor of the AUX buffer of PTT trace
+ * @length: size of the AUX buffer
+ * @nr_pages: number of pages of the AUX buffer
+ * @base: start address of AUX buffer
+ * @pos: position in the AUX buffer to commit traced data
+ */
+struct hisi_ptt_pmu_buf {
+ size_t length;
+ int nr_pages;
+ void *base;
+ long pos;
+};
+
+/**
+ * struct hisi_ptt - Per PTT device data
+ * @trace_ctrl: the control information of PTT trace
+ * @hotplug_node: node for register cpu hotplug event
+ * @hisi_ptt_pmu: the pum device of trace
+ * @iobase: base IO address of the device
+ * @pdev: pci_dev of this PTT device
+ * @tune_lock: lock to serialize the tune process
+ * @pmu_lock: lock to serialize the perf process
+ * @upper_bdf: the upper BDF range of the PCI devices managed by this PTT device
+ * @lower_bdf: the lower BDF range of the PCI devices managed by this PTT device
+ * @port_filters: the filter list of root ports
+ * @req_filters: the filter list of requester ID
+ * @port_mask: port mask of the managed root ports
+ */
+struct hisi_ptt {
+ struct hisi_ptt_trace_ctrl trace_ctrl;
+ struct hlist_node hotplug_node;
+ struct pmu hisi_ptt_pmu;
+ void __iomem *iobase;
+ struct pci_dev *pdev;
+ struct mutex tune_lock;
+ spinlock_t pmu_lock;
+ u32 upper_bdf;
+ u32 lower_bdf;
+
+ /*
+ * The trace TLP headers can either be filtered by certain
+ * root port, or by the requester ID. Organize the filters
+ * by @port_filters and @req_filters here. The mask of all
+ * the valid ports is also cached for doing sanity check
+ * of user input.
+ */
+ struct list_head port_filters;
+ struct list_head req_filters;
+ u16 port_mask;
+};
+
+#define to_hisi_ptt(pmu) container_of(pmu, struct hisi_ptt, hisi_ptt_pmu)
+
+#endif /* _HISI_PTT_H */
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 35798712f811..ffac66db7ac9 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -541,6 +541,19 @@ config MMA9553
To compile this driver as a module, choose M here: the module
will be called mma9553.
+config MSA311
+ tristate "MEMSensing Digital 3-Axis Accelerometer Driver"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ select REGMAP_I2C
+ help
+ Say yes here to build support for the MEMSensing MSA311
+ accelerometer driver.
+
+ To compile this driver as a module, choose M here: the module will be
+ called msa311.
+
config MXC4005
tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
depends on I2C
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 4d8792668838..5e45b5fa5ab5 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -58,6 +58,8 @@ obj-$(CONFIG_MMA9551_CORE) += mma9551_core.o
obj-$(CONFIG_MMA9551) += mma9551.o
obj-$(CONFIG_MMA9553) += mma9553.o
+obj-$(CONFIG_MSA311) += msa311.o
+
obj-$(CONFIG_MXC4005) += mxc4005.o
obj-$(CONFIG_MXC6255) += mxc6255.o
diff --git a/drivers/iio/accel/adxl313.h b/drivers/iio/accel/adxl313.h
index 4415f2fc07e1..72f624af4686 100644
--- a/drivers/iio/accel/adxl313.h
+++ b/drivers/iio/accel/adxl313.h
@@ -8,6 +8,8 @@
#ifndef _ADXL313_H_
#define _ADXL313_H_
+#include <linux/iio/iio.h>
+
/* ADXL313 register definitions */
#define ADXL313_REG_DEVID0 0x00
#define ADXL313_REG_DEVID1 0x01
@@ -26,6 +28,7 @@
#define ADXL313_REG_FIFO_STATUS 0x39
#define ADXL313_DEVID0 0xAD
+#define ADXL313_DEVID0_ADXL312_314 0xE5
#define ADXL313_DEVID1 0x1D
#define ADXL313_PARTID 0xCB
#define ADXL313_SOFT_RESET 0x52
@@ -37,18 +40,46 @@
#define ADXL313_MEASUREMENT_MODE BIT(3)
#define ADXL313_RANGE_MSK GENMASK(1, 0)
-#define ADXL313_RANGE_4G 3
+#define ADXL313_RANGE_MAX 3
#define ADXL313_FULL_RES BIT(3)
#define ADXL313_SPI_3WIRE BIT(6)
#define ADXL313_I2C_DISABLE BIT(6)
+extern const struct regmap_access_table adxl312_readable_regs_table;
extern const struct regmap_access_table adxl313_readable_regs_table;
+extern const struct regmap_access_table adxl314_readable_regs_table;
+extern const struct regmap_access_table adxl312_writable_regs_table;
extern const struct regmap_access_table adxl313_writable_regs_table;
+extern const struct regmap_access_table adxl314_writable_regs_table;
+
+enum adxl313_device_type {
+ ADXL312,
+ ADXL313,
+ ADXL314,
+};
+
+struct adxl313_data {
+ struct regmap *regmap;
+ const struct adxl313_chip_info *chip_info;
+ struct mutex lock; /* lock to protect transf_buf */
+ __le16 transf_buf __aligned(IIO_DMA_MINALIGN);
+};
+
+struct adxl313_chip_info {
+ const char *name;
+ enum adxl313_device_type type;
+ int scale_factor;
+ bool variable_range;
+ bool soft_reset;
+ int (*check_id)(struct device *dev, struct adxl313_data *data);
+};
+
+extern const struct adxl313_chip_info adxl31x_chip_info[];
int adxl313_core_probe(struct device *dev,
struct regmap *regmap,
- const char *name,
+ const struct adxl313_chip_info *chip_info,
int (*setup)(struct device *, struct regmap *));
#endif /* _ADXL313_H_ */
diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c
index afeef779e1d0..4de0a41bd679 100644
--- a/drivers/iio/accel/adxl313_core.c
+++ b/drivers/iio/accel/adxl313_core.c
@@ -8,12 +8,18 @@
*/
#include <linux/bitfield.h>
-#include <linux/iio/iio.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include "adxl313.h"
+static const struct regmap_range adxl312_readable_reg_range[] = {
+ regmap_reg_range(ADXL313_REG_DEVID0, ADXL313_REG_DEVID0),
+ regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)),
+ regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL),
+ regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_FIFO_STATUS),
+};
+
static const struct regmap_range adxl313_readable_reg_range[] = {
regmap_reg_range(ADXL313_REG_DEVID0, ADXL313_REG_XID),
regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET),
@@ -22,12 +28,109 @@ static const struct regmap_range adxl313_readable_reg_range[] = {
regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_FIFO_STATUS),
};
+const struct regmap_access_table adxl312_readable_regs_table = {
+ .yes_ranges = adxl312_readable_reg_range,
+ .n_yes_ranges = ARRAY_SIZE(adxl312_readable_reg_range),
+};
+EXPORT_SYMBOL_NS_GPL(adxl312_readable_regs_table, IIO_ADXL313);
+
const struct regmap_access_table adxl313_readable_regs_table = {
.yes_ranges = adxl313_readable_reg_range,
.n_yes_ranges = ARRAY_SIZE(adxl313_readable_reg_range),
};
EXPORT_SYMBOL_NS_GPL(adxl313_readable_regs_table, IIO_ADXL313);
+const struct regmap_access_table adxl314_readable_regs_table = {
+ .yes_ranges = adxl312_readable_reg_range,
+ .n_yes_ranges = ARRAY_SIZE(adxl312_readable_reg_range),
+};
+EXPORT_SYMBOL_NS_GPL(adxl314_readable_regs_table, IIO_ADXL313);
+
+static int adxl312_check_id(struct device *dev,
+ struct adxl313_data *data)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(data->regmap, ADXL313_REG_DEVID0, &regval);
+ if (ret)
+ return ret;
+
+ if (regval != ADXL313_DEVID0_ADXL312_314)
+ dev_warn(dev, "Invalid manufacturer ID: %#02x\n", regval);
+
+ return 0;
+}
+
+static int adxl313_check_id(struct device *dev,
+ struct adxl313_data *data)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(data->regmap, ADXL313_REG_DEVID0, &regval);
+ if (ret)
+ return ret;
+
+ if (regval != ADXL313_DEVID0)
+ dev_warn(dev, "Invalid manufacturer ID: 0x%02x\n", regval);
+
+ /* Check DEVID1 and PARTID */
+ if (regval == ADXL313_DEVID0) {
+ ret = regmap_read(data->regmap, ADXL313_REG_DEVID1, &regval);
+ if (ret)
+ return ret;
+
+ if (regval != ADXL313_DEVID1)
+ dev_warn(dev, "Invalid mems ID: 0x%02x\n", regval);
+
+ ret = regmap_read(data->regmap, ADXL313_REG_PARTID, &regval);
+ if (ret)
+ return ret;
+
+ if (regval != ADXL313_PARTID)
+ dev_warn(dev, "Invalid device ID: 0x%02x\n", regval);
+ }
+
+ return 0;
+}
+
+const struct adxl313_chip_info adxl31x_chip_info[] = {
+ [ADXL312] = {
+ .name = "adxl312",
+ .type = ADXL312,
+ .scale_factor = 28425072,
+ .variable_range = true,
+ .soft_reset = false,
+ .check_id = &adxl312_check_id,
+ },
+ [ADXL313] = {
+ .name = "adxl313",
+ .type = ADXL313,
+ .scale_factor = 9576806,
+ .variable_range = true,
+ .soft_reset = true,
+ .check_id = &adxl313_check_id,
+ },
+ [ADXL314] = {
+ .name = "adxl314",
+ .type = ADXL314,
+ .scale_factor = 478858719,
+ .variable_range = false,
+ .soft_reset = false,
+ .check_id = &adxl312_check_id,
+ },
+};
+EXPORT_SYMBOL_NS_GPL(adxl31x_chip_info, IIO_ADXL313);
+
+static const struct regmap_range adxl312_writable_reg_range[] = {
+ regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)),
+ regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL),
+ regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_INT_MAP),
+ regmap_reg_range(ADXL313_REG_DATA_FORMAT, ADXL313_REG_DATA_FORMAT),
+ regmap_reg_range(ADXL313_REG_FIFO_CTL, ADXL313_REG_FIFO_CTL),
+};
+
static const struct regmap_range adxl313_writable_reg_range[] = {
regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET),
regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)),
@@ -37,17 +140,23 @@ static const struct regmap_range adxl313_writable_reg_range[] = {
regmap_reg_range(ADXL313_REG_FIFO_CTL, ADXL313_REG_FIFO_CTL),
};
+const struct regmap_access_table adxl312_writable_regs_table = {
+ .yes_ranges = adxl312_writable_reg_range,
+ .n_yes_ranges = ARRAY_SIZE(adxl312_writable_reg_range),
+};
+EXPORT_SYMBOL_NS_GPL(adxl312_writable_regs_table, IIO_ADXL313);
+
const struct regmap_access_table adxl313_writable_regs_table = {
.yes_ranges = adxl313_writable_reg_range,
.n_yes_ranges = ARRAY_SIZE(adxl313_writable_reg_range),
};
EXPORT_SYMBOL_NS_GPL(adxl313_writable_regs_table, IIO_ADXL313);
-struct adxl313_data {
- struct regmap *regmap;
- struct mutex lock; /* lock to protect transf_buf */
- __le16 transf_buf __aligned(IIO_DMA_MINALIGN);
+const struct regmap_access_table adxl314_writable_regs_table = {
+ .yes_ranges = adxl312_writable_reg_range,
+ .n_yes_ranges = ARRAY_SIZE(adxl312_writable_reg_range),
};
+EXPORT_SYMBOL_NS_GPL(adxl314_writable_regs_table, IIO_ADXL313);
static const int adxl313_odr_freqs[][2] = {
[0] = { 6, 250000 },
@@ -156,12 +265,10 @@ static int adxl313_read_raw(struct iio_dev *indio_dev,
*val = sign_extend32(ret, chan->scan_type.realbits - 1);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
- /*
- * Scale for any g range is given in datasheet as
- * 1024 LSB/g = 0.0009765625 * 9.80665 = 0.009576806640625 m/s^2
- */
*val = 0;
- *val2 = 9576806;
+
+ *val2 = data->chip_info->scale_factor;
+
return IIO_VAL_INT_PLUS_NANO;
case IIO_CHAN_INFO_CALIBBIAS:
ret = regmap_read(data->regmap,
@@ -170,7 +277,7 @@ static int adxl313_read_raw(struct iio_dev *indio_dev,
return ret;
/*
- * 8-bit resolution at +/- 0.5g, that is 4x accel data scale
+ * 8-bit resolution at minimum range, that is 4x accel data scale
* factor at full resolution
*/
*val = sign_extend32(regval, 7) * 4;
@@ -198,7 +305,7 @@ static int adxl313_write_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_CALIBBIAS:
/*
- * 8-bit resolution at +/- 0.5g, that is 4x accel data scale
+ * 8-bit resolution at minimum range, that is 4x accel data scale
* factor at full resolution
*/
if (clamp_val(val, -128 * 4, 127 * 4) != val)
@@ -223,14 +330,18 @@ static const struct iio_info adxl313_info = {
static int adxl313_setup(struct device *dev, struct adxl313_data *data,
int (*setup)(struct device *, struct regmap *))
{
- unsigned int regval;
int ret;
- /* Ensures the device is in a consistent state after start up */
- ret = regmap_write(data->regmap, ADXL313_REG_SOFT_RESET,
- ADXL313_SOFT_RESET);
- if (ret)
- return ret;
+ /*
+ * If sw reset available, ensures the device is in a consistent
+ * state after start up
+ */
+ if (data->chip_info->soft_reset) {
+ ret = regmap_write(data->regmap, ADXL313_REG_SOFT_RESET,
+ ADXL313_SOFT_RESET);
+ if (ret)
+ return ret;
+ }
if (setup) {
ret = setup(dev, data->regmap);
@@ -238,46 +349,25 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data,
return ret;
}
- ret = regmap_read(data->regmap, ADXL313_REG_DEVID0, &regval);
+ ret = data->chip_info->check_id(dev, data);
if (ret)
return ret;
- if (regval != ADXL313_DEVID0) {
- dev_err(dev, "Invalid manufacturer ID: 0x%02x\n", regval);
- return -ENODEV;
- }
-
- ret = regmap_read(data->regmap, ADXL313_REG_DEVID1, &regval);
- if (ret)
- return ret;
-
- if (regval != ADXL313_DEVID1) {
- dev_err(dev, "Invalid mems ID: 0x%02x\n", regval);
- return -ENODEV;
- }
-
- ret = regmap_read(data->regmap, ADXL313_REG_PARTID, &regval);
- if (ret)
- return ret;
+ /* Sets the range to maximum, full resolution, if applicable */
+ if (data->chip_info->variable_range) {
+ ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT,
+ ADXL313_RANGE_MSK,
+ FIELD_PREP(ADXL313_RANGE_MSK, ADXL313_RANGE_MAX));
+ if (ret)
+ return ret;
- if (regval != ADXL313_PARTID) {
- dev_err(dev, "Invalid device ID: 0x%02x\n", regval);
- return -ENODEV;
+ /* Enables full resolution */
+ ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT,
+ ADXL313_FULL_RES, ADXL313_FULL_RES);
+ if (ret)
+ return ret;
}
- /* Sets the range to +/- 4g */
- ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT,
- ADXL313_RANGE_MSK,
- FIELD_PREP(ADXL313_RANGE_MSK, ADXL313_RANGE_4G));
- if (ret)
- return ret;
-
- /* Enables full resolution */
- ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT,
- ADXL313_FULL_RES, ADXL313_FULL_RES);
- if (ret)
- return ret;
-
/* Enables measurement mode */
return regmap_update_bits(data->regmap, ADXL313_REG_POWER_CTL,
ADXL313_POWER_CTL_MSK,
@@ -288,7 +378,7 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data,
* adxl313_core_probe() - probe and setup for adxl313 accelerometer
* @dev: Driver model representation of the device
* @regmap: Register map of the device
- * @name: Device name buffer reference
+ * @chip_info: Structure containing device specific data
* @setup: Setup routine to be executed right before the standard device
* setup, can also be set to NULL if not required
*
@@ -296,7 +386,7 @@ static int adxl313_setup(struct device *dev, struct adxl313_data *data,
*/
int adxl313_core_probe(struct device *dev,
struct regmap *regmap,
- const char *name,
+ const struct adxl313_chip_info *chip_info,
int (*setup)(struct device *, struct regmap *))
{
struct adxl313_data *data;
@@ -309,9 +399,11 @@ int adxl313_core_probe(struct device *dev,
data = iio_priv(indio_dev);
data->regmap = regmap;
+ data->chip_info = chip_info;
+
mutex_init(&data->lock);
- indio_dev->name = name;
+ indio_dev->name = chip_info->name;
indio_dev->info = &adxl313_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = adxl313_channels;
diff --git a/drivers/iio/accel/adxl313_i2c.c b/drivers/iio/accel/adxl313_i2c.c
index c329765dbf60..99cc7fc29488 100644
--- a/drivers/iio/accel/adxl313_i2c.c
+++ b/drivers/iio/accel/adxl313_i2c.c
@@ -14,42 +14,72 @@
#include "adxl313.h"
-static const struct regmap_config adxl313_i2c_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
- .rd_table = &adxl313_readable_regs_table,
- .wr_table = &adxl313_writable_regs_table,
- .max_register = 0x39,
+static const struct regmap_config adxl31x_i2c_regmap_config[] = {
+ [ADXL312] = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .rd_table = &adxl312_readable_regs_table,
+ .wr_table = &adxl312_writable_regs_table,
+ .max_register = 0x39,
+ },
+ [ADXL313] = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .rd_table = &adxl313_readable_regs_table,
+ .wr_table = &adxl313_writable_regs_table,
+ .max_register = 0x39,
+ },
+ [ADXL314] = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .rd_table = &adxl314_readable_regs_table,
+ .wr_table = &adxl314_writable_regs_table,
+ .max_register = 0x39,
+ },
};
-static int adxl313_i2c_probe(struct i2c_client *client)
-{
- struct regmap *regmap;
-
- regmap = devm_regmap_init_i2c(client, &adxl313_i2c_regmap_config);
- if (IS_ERR(regmap)) {
- dev_err(&client->dev, "Error initializing i2c regmap: %ld\n",
- PTR_ERR(regmap));
- return PTR_ERR(regmap);
- }
-
- return adxl313_core_probe(&client->dev, regmap, client->name, NULL);
-}
-
static const struct i2c_device_id adxl313_i2c_id[] = {
- { "adxl313" },
+ { .name = "adxl312", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL312] },
+ { .name = "adxl313", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL312] },
+ { .name = "adxl314", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL312] },
{ }
};
MODULE_DEVICE_TABLE(i2c, adxl313_i2c_id);
static const struct of_device_id adxl313_of_match[] = {
- { .compatible = "adi,adxl313" },
+ { .compatible = "adi,adxl312", .data = &adxl31x_chip_info[ADXL312] },
+ { .compatible = "adi,adxl313", .data = &adxl31x_chip_info[ADXL313] },
+ { .compatible = "adi,adxl314", .data = &adxl31x_chip_info[ADXL314] },
{ }
};
MODULE_DEVICE_TABLE(of, adxl313_of_match);
+static int adxl313_i2c_probe(struct i2c_client *client)
+{
+ const struct adxl313_chip_info *chip_data;
+ struct regmap *regmap;
+
+ /*
+ * Retrieves device specific data as a pointer to a
+ * adxl313_chip_info structure
+ */
+ chip_data = device_get_match_data(&client->dev);
+ if (!chip_data)
+ chip_data = (const struct adxl313_chip_info *)i2c_match_id(adxl313_i2c_id, client)->driver_data;
+
+ regmap = devm_regmap_init_i2c(client,
+ &adxl31x_i2c_regmap_config[chip_data->type]);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "Error initializing i2c regmap: %ld\n",
+ PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ return adxl313_core_probe(&client->dev, regmap, chip_data, NULL);
+}
+
static struct i2c_driver adxl313_i2c_driver = {
.driver = {
.name = "adxl313_i2c",
diff --git a/drivers/iio/accel/adxl313_spi.c b/drivers/iio/accel/adxl313_spi.c
index a3c6d553462d..b7cc15678a2b 100644
--- a/drivers/iio/accel/adxl313_spi.c
+++ b/drivers/iio/accel/adxl313_spi.c
@@ -11,17 +11,38 @@
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/spi/spi.h>
+#include <linux/property.h>
#include "adxl313.h"
-static const struct regmap_config adxl313_spi_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
- .rd_table = &adxl313_readable_regs_table,
- .wr_table = &adxl313_writable_regs_table,
- .max_register = 0x39,
- /* Setting bits 7 and 6 enables multiple-byte read */
- .read_flag_mask = BIT(7) | BIT(6),
+static const struct regmap_config adxl31x_spi_regmap_config[] = {
+ [ADXL312] = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .rd_table = &adxl312_readable_regs_table,
+ .wr_table = &adxl312_writable_regs_table,
+ .max_register = 0x39,
+ /* Setting bits 7 and 6 enables multiple-byte read */
+ .read_flag_mask = BIT(7) | BIT(6),
+ },
+ [ADXL313] = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .rd_table = &adxl313_readable_regs_table,
+ .wr_table = &adxl313_writable_regs_table,
+ .max_register = 0x39,
+ /* Setting bits 7 and 6 enables multiple-byte read */
+ .read_flag_mask = BIT(7) | BIT(6),
+ },
+ [ADXL314] = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .rd_table = &adxl314_readable_regs_table,
+ .wr_table = &adxl314_writable_regs_table,
+ .max_register = 0x39,
+ /* Setting bits 7 and 6 enables multiple-byte read */
+ .read_flag_mask = BIT(7) | BIT(6),
+ },
};
static int adxl313_spi_setup(struct device *dev, struct regmap *regmap)
@@ -42,7 +63,7 @@ static int adxl313_spi_setup(struct device *dev, struct regmap *regmap)
static int adxl313_spi_probe(struct spi_device *spi)
{
- const struct spi_device_id *id = spi_get_device_id(spi);
+ const struct adxl313_chip_info *chip_data;
struct regmap *regmap;
int ret;
@@ -51,26 +72,40 @@ static int adxl313_spi_probe(struct spi_device *spi)
if (ret)
return ret;
- regmap = devm_regmap_init_spi(spi, &adxl313_spi_regmap_config);
+ /*
+ * Retrieves device specific data as a pointer to a
+ * adxl313_chip_info structure
+ */
+ chip_data = device_get_match_data(&spi->dev);
+ if (!chip_data)
+ chip_data = (const struct adxl313_chip_info *)spi_get_device_id(spi)->driver_data;
+
+ regmap = devm_regmap_init_spi(spi,
+ &adxl31x_spi_regmap_config[chip_data->type]);
+
if (IS_ERR(regmap)) {
dev_err(&spi->dev, "Error initializing spi regmap: %ld\n",
PTR_ERR(regmap));
return PTR_ERR(regmap);
}
- return adxl313_core_probe(&spi->dev, regmap, id->name,
- &adxl313_spi_setup);
+ return adxl313_core_probe(&spi->dev, regmap,
+ chip_data, &adxl313_spi_setup);
}
static const struct spi_device_id adxl313_spi_id[] = {
- { "adxl313" },
+ { .name = "adxl312", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL312] },
+ { .name = "adxl313", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL313] },
+ { .name = "adxl314", .driver_data = (kernel_ulong_t)&adxl31x_chip_info[ADXL314] },
{ }
};
MODULE_DEVICE_TABLE(spi, adxl313_spi_id);
static const struct of_device_id adxl313_of_match[] = {
- { .compatible = "adi,adxl313" },
+ { .compatible = "adi,adxl312", .data = &adxl31x_chip_info[ADXL312] },
+ { .compatible = "adi,adxl313", .data = &adxl31x_chip_info[ADXL313] },
+ { .compatible = "adi,adxl314", .data = &adxl31x_chip_info[ADXL314] },
{ }
};
diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index 370bfec1275a..1919e0089c11 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/property.h>
#include <linux/regmap.h>
+#include <linux/units.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@@ -32,7 +33,6 @@
#define ADXL345_BW_RATE GENMASK(3, 0)
#define ADXL345_BASE_RATE_NANO_HZ 97656250LL
-#define NHZ_PER_HZ 1000000000LL
#define ADXL345_POWER_CTL_MEASURE BIT(3)
#define ADXL345_POWER_CTL_STANDBY 0x00
@@ -139,7 +139,7 @@ static int adxl345_read_raw(struct iio_dev *indio_dev,
samp_freq_nhz = ADXL345_BASE_RATE_NANO_HZ <<
(regval & ADXL345_BW_RATE);
- *val = div_s64_rem(samp_freq_nhz, NHZ_PER_HZ, val2);
+ *val = div_s64_rem(samp_freq_nhz, NANOHZ_PER_HZ, val2);
return IIO_VAL_INT_PLUS_NANO;
}
@@ -164,7 +164,8 @@ static int adxl345_write_raw(struct iio_dev *indio_dev,
ADXL345_REG_OFS_AXIS(chan->address),
val / 4);
case IIO_CHAN_INFO_SAMP_FREQ:
- n = div_s64(val * NHZ_PER_HZ + val2, ADXL345_BASE_RATE_NANO_HZ);
+ n = div_s64(val * NANOHZ_PER_HZ + val2,
+ ADXL345_BASE_RATE_NANO_HZ);
return regmap_update_bits(data->regmap, ADXL345_REG_BW_RATE,
ADXL345_BW_RATE,
diff --git a/drivers/iio/accel/bma400.h b/drivers/iio/accel/bma400.h
index e8f802a82300..36edbaff4f7f 100644
--- a/drivers/iio/accel/bma400.h
+++ b/drivers/iio/accel/bma400.h
@@ -40,6 +40,7 @@
#define BMA400_INT_STAT1_REG 0x0f
#define BMA400_INT_STAT2_REG 0x10
#define BMA400_INT12_MAP_REG 0x23
+#define BMA400_INT_ENG_OVRUN_MSK BIT(4)
/* Temperature register */
#define BMA400_TEMP_DATA_REG 0x11
@@ -105,6 +106,19 @@
#define BMA400_INT_GEN2_MSK BIT(3)
#define BMA400_GEN_HYST_MSK GENMASK(1, 0)
+/* TAP config registers */
+#define BMA400_TAP_CONFIG 0x57
+#define BMA400_TAP_CONFIG1 0x58
+#define BMA400_S_TAP_MSK BIT(2)
+#define BMA400_D_TAP_MSK BIT(3)
+#define BMA400_INT_S_TAP_MSK BIT(10)
+#define BMA400_INT_D_TAP_MSK BIT(11)
+#define BMA400_TAP_SEN_MSK GENMASK(2, 0)
+#define BMA400_TAP_TICSTH_MSK GENMASK(1, 0)
+#define BMA400_TAP_QUIET_MSK GENMASK(3, 2)
+#define BMA400_TAP_QUIETDT_MSK GENMASK(5, 4)
+#define BMA400_TAP_TIM_LIST_LEN 4
+
/*
* BMA400_SCALE_MIN macro value represents m/s^2 for 1 LSB before
* converting to micro values for +-2g range.
diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c
index c31bdd9b168e..ad8fce3e08cd 100644
--- a/drivers/iio/accel/bma400_core.c
+++ b/drivers/iio/accel/bma400_core.c
@@ -26,6 +26,7 @@
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/events.h>
+#include <linux/iio/sysfs.h>
#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
@@ -47,6 +48,27 @@ static int bma400_sample_freqs[14];
static const int bma400_osr_range[] = { 0, 1, 3 };
+static int tap_reset_timeout[BMA400_TAP_TIM_LIST_LEN] = {
+ 300000,
+ 400000,
+ 500000,
+ 600000
+};
+
+static int tap_max2min_time[BMA400_TAP_TIM_LIST_LEN] = {
+ 30000,
+ 45000,
+ 60000,
+ 90000
+};
+
+static int double_tap2_min_delay[BMA400_TAP_TIM_LIST_LEN] = {
+ 20000,
+ 40000,
+ 60000,
+ 80000
+};
+
/* See the ACC_CONFIG0 section of the datasheet */
enum bma400_power_mode {
POWER_MODE_SLEEP = 0x00,
@@ -88,6 +110,7 @@ struct bma400_data {
bool step_event_en;
bool activity_event_en;
unsigned int generic_event_en;
+ unsigned int tap_event_en_bitmask;
/* Correct time stamp alignment */
struct {
__le16 buff[3];
@@ -216,6 +239,115 @@ static const struct iio_event_spec bma400_accel_event[] = {
BIT(IIO_EV_INFO_HYSTERESIS) |
BIT(IIO_EV_INFO_ENABLE),
},
+ {
+ .type = IIO_EV_TYPE_GESTURE,
+ .dir = IIO_EV_DIR_SINGLETAP,
+ .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE) |
+ BIT(IIO_EV_INFO_RESET_TIMEOUT),
+ },
+ {
+ .type = IIO_EV_TYPE_GESTURE,
+ .dir = IIO_EV_DIR_DOUBLETAP,
+ .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE) |
+ BIT(IIO_EV_INFO_RESET_TIMEOUT) |
+ BIT(IIO_EV_INFO_TAP2_MIN_DELAY),
+ },
+};
+
+static int usec_to_tapreg_raw(int usec, const int *time_list)
+{
+ int index;
+
+ for (index = 0; index < BMA400_TAP_TIM_LIST_LEN; index++) {
+ if (usec == time_list[index])
+ return index;
+ }
+ return -EINVAL;
+}
+
+static ssize_t in_accel_gesture_tap_maxtomin_time_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct bma400_data *data = iio_priv(indio_dev);
+ int ret, reg_val, raw, vals[2];
+
+ ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, &reg_val);
+ if (ret)
+ return ret;
+
+ raw = FIELD_GET(BMA400_TAP_TICSTH_MSK, reg_val);
+ vals[0] = 0;
+ vals[1] = tap_max2min_time[raw];
+
+ return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO, 2, vals);
+}
+
+static ssize_t in_accel_gesture_tap_maxtomin_time_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct bma400_data *data = iio_priv(indio_dev);
+ int ret, val_int, val_fract, raw;
+
+ ret = iio_str_to_fixpoint(buf, 100000, &val_int, &val_fract);
+ if (ret)
+ return ret;
+
+ raw = usec_to_tapreg_raw(val_fract, tap_max2min_time);
+ if (raw < 0)
+ return -EINVAL;
+
+ ret = regmap_update_bits(data->regmap, BMA400_TAP_CONFIG1,
+ BMA400_TAP_TICSTH_MSK,
+ FIELD_PREP(BMA400_TAP_TICSTH_MSK, raw));
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static IIO_DEVICE_ATTR_RW(in_accel_gesture_tap_maxtomin_time, 0);
+
+/*
+ * Tap interrupts works with 200 Hz input data rate and the time based tap
+ * controls are in the terms of data samples so the below calculation is
+ * used to convert the configuration values into seconds.
+ * e.g.:
+ * 60 data samples * 0.005 ms = 0.3 seconds.
+ * 80 data samples * 0.005 ms = 0.4 seconds.
+ */
+
+/* quiet configuration values in seconds */
+static IIO_CONST_ATTR(in_accel_gesture_tap_reset_timeout_available,
+ "0.3 0.4 0.5 0.6");
+
+/* tics_th configuration values in seconds */
+static IIO_CONST_ATTR(in_accel_gesture_tap_maxtomin_time_available,
+ "0.03 0.045 0.06 0.09");
+
+/* quiet_dt configuration values in seconds */
+static IIO_CONST_ATTR(in_accel_gesture_doubletap_tap2_min_delay_available,
+ "0.02 0.04 0.06 0.08");
+
+/* List of sensitivity values available to configure tap interrupts */
+static IIO_CONST_ATTR(in_accel_gesture_tap_value_available, "0 1 2 3 4 5 6 7");
+
+static struct attribute *bma400_event_attributes[] = {
+ &iio_const_attr_in_accel_gesture_tap_value_available.dev_attr.attr,
+ &iio_const_attr_in_accel_gesture_tap_reset_timeout_available.dev_attr.attr,
+ &iio_const_attr_in_accel_gesture_tap_maxtomin_time_available.dev_attr.attr,
+ &iio_const_attr_in_accel_gesture_doubletap_tap2_min_delay_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_gesture_tap_maxtomin_time.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group bma400_event_attribute_group = {
+ .attrs = bma400_event_attributes,
};
#define BMA400_ACC_CHANNEL(_index, _axis) { \
@@ -1012,6 +1144,12 @@ static int bma400_read_event_config(struct iio_dev *indio_dev,
case IIO_EV_DIR_FALLING:
return FIELD_GET(BMA400_INT_GEN2_MSK,
data->generic_event_en);
+ case IIO_EV_DIR_SINGLETAP:
+ return FIELD_GET(BMA400_S_TAP_MSK,
+ data->tap_event_en_bitmask);
+ case IIO_EV_DIR_DOUBLETAP:
+ return FIELD_GET(BMA400_D_TAP_MSK,
+ data->tap_event_en_bitmask);
default:
return -EINVAL;
}
@@ -1046,7 +1184,8 @@ static int bma400_activity_event_en(struct bma400_data *data,
enum iio_event_direction dir,
int state)
{
- int ret, reg, msk, value, field_value;
+ int ret, reg, msk, value;
+ int field_value = 0;
switch (dir) {
case IIO_EV_DIR_RISING:
@@ -1101,6 +1240,80 @@ static int bma400_activity_event_en(struct bma400_data *data,
return 0;
}
+static int bma400_tap_event_en(struct bma400_data *data,
+ enum iio_event_direction dir, int state)
+{
+ unsigned int mask, field_value;
+ int ret;
+
+ /*
+ * Tap interrupts can be configured only in normal mode.
+ * See table in section 4.3 "Power modes - performance modes" of
+ * datasheet v1.2.
+ */
+ if (data->power_mode != POWER_MODE_NORMAL)
+ return -EINVAL;
+
+ /*
+ * Tap interrupts are operating with a data rate of 200Hz.
+ * See section 4.7 "Tap sensing interrupt" in datasheet v1.2.
+ */
+ if (data->sample_freq.hz != 200 && state) {
+ dev_err(data->dev, "Invalid data rate for tap interrupts.\n");
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(data->regmap, BMA400_INT12_MAP_REG,
+ BMA400_S_TAP_MSK,
+ FIELD_PREP(BMA400_S_TAP_MSK, state));
+ if (ret)
+ return ret;
+
+ switch (dir) {
+ case IIO_EV_DIR_SINGLETAP:
+ mask = BMA400_S_TAP_MSK;
+ set_mask_bits(&field_value, BMA400_S_TAP_MSK,
+ FIELD_PREP(BMA400_S_TAP_MSK, state));
+ break;
+ case IIO_EV_DIR_DOUBLETAP:
+ mask = BMA400_D_TAP_MSK;
+ set_mask_bits(&field_value, BMA400_D_TAP_MSK,
+ FIELD_PREP(BMA400_D_TAP_MSK, state));
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(data->regmap, BMA400_INT_CONFIG1_REG, mask,
+ field_value);
+ if (ret)
+ return ret;
+
+ set_mask_bits(&data->tap_event_en_bitmask, mask, field_value);
+
+ return 0;
+}
+
+static int bma400_disable_adv_interrupt(struct bma400_data *data)
+{
+ int ret;
+
+ ret = regmap_write(data->regmap, BMA400_INT_CONFIG0_REG, 0);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(data->regmap, BMA400_INT_CONFIG1_REG, 0);
+ if (ret)
+ return ret;
+
+ data->tap_event_en_bitmask = 0;
+ data->generic_event_en = 0;
+ data->step_event_en = false;
+ data->activity_event_en = false;
+
+ return 0;
+}
+
static int bma400_write_event_config(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
@@ -1111,10 +1324,20 @@ static int bma400_write_event_config(struct iio_dev *indio_dev,
switch (chan->type) {
case IIO_ACCEL:
- mutex_lock(&data->mutex);
- ret = bma400_activity_event_en(data, dir, state);
- mutex_unlock(&data->mutex);
- return ret;
+ switch (type) {
+ case IIO_EV_TYPE_MAG:
+ mutex_lock(&data->mutex);
+ ret = bma400_activity_event_en(data, dir, state);
+ mutex_unlock(&data->mutex);
+ return ret;
+ case IIO_EV_TYPE_GESTURE:
+ mutex_lock(&data->mutex);
+ ret = bma400_tap_event_en(data, dir, state);
+ mutex_unlock(&data->mutex);
+ return ret;
+ default:
+ return -EINVAL;
+ }
case IIO_STEPS:
mutex_lock(&data->mutex);
ret = bma400_steps_event_enable(data, state);
@@ -1157,10 +1380,13 @@ static int bma400_read_event_value(struct iio_dev *indio_dev,
int *val, int *val2)
{
struct bma400_data *data = iio_priv(indio_dev);
- int ret, reg;
+ int ret, reg, reg_val, raw;
- switch (chan->type) {
- case IIO_ACCEL:
+ if (chan->type != IIO_ACCEL)
+ return -EINVAL;
+
+ switch (type) {
+ case IIO_EV_TYPE_MAG:
reg = get_gen_config_reg(dir);
if (reg < 0)
return -EINVAL;
@@ -1196,6 +1422,39 @@ static int bma400_read_event_value(struct iio_dev *indio_dev,
default:
return -EINVAL;
}
+ case IIO_EV_TYPE_GESTURE:
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ ret = regmap_read(data->regmap, BMA400_TAP_CONFIG,
+ &reg_val);
+ if (ret)
+ return ret;
+
+ *val = FIELD_GET(BMA400_TAP_SEN_MSK, reg_val);
+ return IIO_VAL_INT;
+ case IIO_EV_INFO_RESET_TIMEOUT:
+ ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1,
+ &reg_val);
+ if (ret)
+ return ret;
+
+ raw = FIELD_GET(BMA400_TAP_QUIET_MSK, reg_val);
+ *val = 0;
+ *val2 = tap_reset_timeout[raw];
+ return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_EV_INFO_TAP2_MIN_DELAY:
+ ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1,
+ &reg_val);
+ if (ret)
+ return ret;
+
+ raw = FIELD_GET(BMA400_TAP_QUIETDT_MSK, reg_val);
+ *val = 0;
+ *val2 = double_tap2_min_delay[raw];
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
default:
return -EINVAL;
}
@@ -1209,10 +1468,13 @@ static int bma400_write_event_value(struct iio_dev *indio_dev,
int val, int val2)
{
struct bma400_data *data = iio_priv(indio_dev);
- int reg, ret;
+ int reg, ret, raw;
- switch (chan->type) {
- case IIO_ACCEL:
+ if (chan->type != IIO_ACCEL)
+ return -EINVAL;
+
+ switch (type) {
+ case IIO_EV_TYPE_MAG:
reg = get_gen_config_reg(dir);
if (reg < 0)
return -EINVAL;
@@ -1248,6 +1510,40 @@ static int bma400_write_event_value(struct iio_dev *indio_dev,
default:
return -EINVAL;
}
+ case IIO_EV_TYPE_GESTURE:
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ if (val < 0 || val > 7)
+ return -EINVAL;
+
+ return regmap_update_bits(data->regmap,
+ BMA400_TAP_CONFIG,
+ BMA400_TAP_SEN_MSK,
+ FIELD_PREP(BMA400_TAP_SEN_MSK,
+ val));
+ case IIO_EV_INFO_RESET_TIMEOUT:
+ raw = usec_to_tapreg_raw(val2, tap_reset_timeout);
+ if (raw < 0)
+ return -EINVAL;
+
+ return regmap_update_bits(data->regmap,
+ BMA400_TAP_CONFIG1,
+ BMA400_TAP_QUIET_MSK,
+ FIELD_PREP(BMA400_TAP_QUIET_MSK,
+ raw));
+ case IIO_EV_INFO_TAP2_MIN_DELAY:
+ raw = usec_to_tapreg_raw(val2, double_tap2_min_delay);
+ if (raw < 0)
+ return -EINVAL;
+
+ return regmap_update_bits(data->regmap,
+ BMA400_TAP_CONFIG1,
+ BMA400_TAP_QUIETDT_MSK,
+ FIELD_PREP(BMA400_TAP_QUIETDT_MSK,
+ raw));
+ default:
+ return -EINVAL;
+ }
default:
return -EINVAL;
}
@@ -1287,6 +1583,7 @@ static const struct iio_info bma400_info = {
.write_event_config = bma400_write_event_config,
.write_event_value = bma400_write_event_value,
.read_event_value = bma400_read_event_value,
+ .event_attrs = &bma400_event_attribute_group,
};
static const struct iio_trigger_ops bma400_trigger_ops = {
@@ -1350,6 +1647,32 @@ static irqreturn_t bma400_interrupt(int irq, void *private)
if (ret || !data->status)
goto unlock_err;
+ /*
+ * Disable all advance interrupts if interrupt engine overrun occurs.
+ * See section 4.7 "Interrupt engine overrun" in datasheet v1.2.
+ */
+ if (FIELD_GET(BMA400_INT_ENG_OVRUN_MSK, le16_to_cpu(data->status))) {
+ bma400_disable_adv_interrupt(data);
+ dev_err(data->dev, "Interrupt engine overrun\n");
+ goto unlock_err;
+ }
+
+ if (FIELD_GET(BMA400_INT_S_TAP_MSK, le16_to_cpu(data->status)))
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL, 0,
+ IIO_MOD_X_OR_Y_OR_Z,
+ IIO_EV_TYPE_GESTURE,
+ IIO_EV_DIR_SINGLETAP),
+ timestamp);
+
+ if (FIELD_GET(BMA400_INT_D_TAP_MSK, le16_to_cpu(data->status)))
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_ACCEL, 0,
+ IIO_MOD_X_OR_Y_OR_Z,
+ IIO_EV_TYPE_GESTURE,
+ IIO_EV_DIR_DOUBLETAP),
+ timestamp);
+
if (FIELD_GET(BMA400_INT_GEN1_MSK, le16_to_cpu(data->status)))
ev_dir = IIO_EV_DIR_RISING;
@@ -1467,5 +1790,6 @@ int bma400_probe(struct device *dev, struct regmap *regmap, int irq,
EXPORT_SYMBOL_NS(bma400_probe, IIO_BMA400);
MODULE_AUTHOR("Dan Robertson <dan@dlrobertson.com>");
+MODULE_AUTHOR("Jagath Jog J <jagathjog1996@gmail.com>");
MODULE_DESCRIPTION("Bosch BMA400 triaxial acceleration sensor core");
MODULE_LICENSE("GPL");
diff --git a/drivers/iio/accel/bmi088-accel-core.c b/drivers/iio/accel/bmi088-accel-core.c
index bca4cf98bf4d..84edcc78d796 100644
--- a/drivers/iio/accel/bmi088-accel-core.c
+++ b/drivers/iio/accel/bmi088-accel-core.c
@@ -606,7 +606,7 @@ void bmi088_accel_core_remove(struct device *dev)
}
EXPORT_SYMBOL_NS_GPL(bmi088_accel_core_remove, IIO_BMI088);
-static int __maybe_unused bmi088_accel_runtime_suspend(struct device *dev)
+static int bmi088_accel_runtime_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmi088_accel_data *data = iio_priv(indio_dev);
@@ -614,7 +614,7 @@ static int __maybe_unused bmi088_accel_runtime_suspend(struct device *dev)
return bmi088_accel_power_down(data);
}
-static int __maybe_unused bmi088_accel_runtime_resume(struct device *dev)
+static int bmi088_accel_runtime_resume(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmi088_accel_data *data = iio_priv(indio_dev);
@@ -622,13 +622,10 @@ static int __maybe_unused bmi088_accel_runtime_resume(struct device *dev)
return bmi088_accel_power_up(data);
}
-const struct dev_pm_ops bmi088_accel_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
- pm_runtime_force_resume)
- SET_RUNTIME_PM_OPS(bmi088_accel_runtime_suspend,
- bmi088_accel_runtime_resume, NULL)
-};
-EXPORT_SYMBOL_NS_GPL(bmi088_accel_pm_ops, IIO_BMI088);
+EXPORT_NS_GPL_RUNTIME_DEV_PM_OPS(bmi088_accel_pm_ops,
+ bmi088_accel_runtime_suspend,
+ bmi088_accel_runtime_resume, NULL,
+ IIO_BMI088);
MODULE_AUTHOR("Niek van Agt <niek.van.agt@topicproducts.com>");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/bmi088-accel-spi.c b/drivers/iio/accel/bmi088-accel-spi.c
index 9e2ed3bd5661..ee540edd8412 100644
--- a/drivers/iio/accel/bmi088-accel-spi.c
+++ b/drivers/iio/accel/bmi088-accel-spi.c
@@ -80,7 +80,7 @@ MODULE_DEVICE_TABLE(spi, bmi088_accel_id);
static struct spi_driver bmi088_accel_driver = {
.driver = {
.name = "bmi088_accel_spi",
- .pm = &bmi088_accel_pm_ops,
+ .pm = pm_ptr(&bmi088_accel_pm_ops),
.of_match_table = bmi088_of_match,
},
.probe = bmi088_accel_probe,
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 94f7b6ac5c87..adc66b3615c0 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1064,7 +1064,7 @@ static int kxcjk1013_write_event_config(struct iio_dev *indio_dev,
/*
* We will expect the enable and disable to do operation in
- * in reverse order. This will happen here anyway as our
+ * reverse order. This will happen here anyway as our
* resume operation uses sync mode runtime pm calls, the
* suspend operation will be delayed by autosuspend delay
* So the disable operation will still happen in reverse of
diff --git a/drivers/iio/accel/msa311.c b/drivers/iio/accel/msa311.c
new file mode 100644
index 000000000000..2fded3759171
--- /dev/null
+++ b/drivers/iio/accel/msa311.c
@@ -0,0 +1,1321 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MEMSensing digital 3-Axis accelerometer
+ *
+ * MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
+ * sensitivity consumer applications. It has dynamic user-selectable full
+ * scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
+ * with output data rates from 1Hz to 1000Hz.
+ *
+ * MSA311 is available in an ultra small (2mm x 2mm, height 0.95mm) LGA package
+ * and is guaranteed to operate over -40C to +85C.
+ *
+ * This driver supports following MSA311 features:
+ * - IIO interface
+ * - Different power modes: NORMAL, SUSPEND
+ * - ODR (Output Data Rate) selection
+ * - Scale selection
+ * - IIO triggered buffer
+ * - NEW_DATA interrupt + trigger
+ *
+ * Below features to be done:
+ * - Motion Events: ACTIVE, TAP, ORIENT, FREEFALL
+ * - Low Power mode
+ *
+ * Copyright (c) 2022, SberDevices. All Rights Reserved.
+ *
+ * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/string_helpers.h>
+#include <linux/units.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define MSA311_SOFT_RESET_REG 0x00
+#define MSA311_PARTID_REG 0x01
+#define MSA311_ACC_X_REG 0x02
+#define MSA311_ACC_Y_REG 0x04
+#define MSA311_ACC_Z_REG 0x06
+#define MSA311_MOTION_INT_REG 0x09
+#define MSA311_DATA_INT_REG 0x0A
+#define MSA311_TAP_ACTIVE_STS_REG 0x0B
+#define MSA311_ORIENT_STS_REG 0x0C
+#define MSA311_RANGE_REG 0x0F
+#define MSA311_ODR_REG 0x10
+#define MSA311_PWR_MODE_REG 0x11
+#define MSA311_SWAP_POLARITY_REG 0x12
+#define MSA311_INT_SET_0_REG 0x16
+#define MSA311_INT_SET_1_REG 0x17
+#define MSA311_INT_MAP_0_REG 0x19
+#define MSA311_INT_MAP_1_REG 0x1A
+#define MSA311_INT_CONFIG_REG 0x20
+#define MSA311_INT_LATCH_REG 0x21
+#define MSA311_FREEFALL_DUR_REG 0x22
+#define MSA311_FREEFALL_TH_REG 0x23
+#define MSA311_FREEFALL_HY_REG 0x24
+#define MSA311_ACTIVE_DUR_REG 0x27
+#define MSA311_ACTIVE_TH_REG 0x28
+#define MSA311_TAP_DUR_REG 0x2A
+#define MSA311_TAP_TH_REG 0x2B
+#define MSA311_ORIENT_HY_REG 0x2C
+#define MSA311_Z_BLOCK_REG 0x2D
+#define MSA311_OFFSET_X_REG 0x38
+#define MSA311_OFFSET_Y_REG 0x39
+#define MSA311_OFFSET_Z_REG 0x3A
+
+enum msa311_fields {
+ /* Soft_Reset */
+ F_SOFT_RESET_I2C, F_SOFT_RESET_SPI,
+ /* Motion_Interrupt */
+ F_ORIENT_INT, F_S_TAP_INT, F_D_TAP_INT, F_ACTIVE_INT, F_FREEFALL_INT,
+ /* Data_Interrupt */
+ F_NEW_DATA_INT,
+ /* Tap_Active_Status */
+ F_TAP_SIGN, F_TAP_FIRST_X, F_TAP_FIRST_Y, F_TAP_FIRST_Z, F_ACTV_SIGN,
+ F_ACTV_FIRST_X, F_ACTV_FIRST_Y, F_ACTV_FIRST_Z,
+ /* Orientation_Status */
+ F_ORIENT_Z, F_ORIENT_X_Y,
+ /* Range */
+ F_FS,
+ /* ODR */
+ F_X_AXIS_DIS, F_Y_AXIS_DIS, F_Z_AXIS_DIS, F_ODR,
+ /* Power Mode/Bandwidth */
+ F_PWR_MODE, F_LOW_POWER_BW,
+ /* Swap_Polarity */
+ F_X_POLARITY, F_Y_POLARITY, F_Z_POLARITY, F_X_Y_SWAP,
+ /* Int_Set_0 */
+ F_ORIENT_INT_EN, F_S_TAP_INT_EN, F_D_TAP_INT_EN, F_ACTIVE_INT_EN_Z,
+ F_ACTIVE_INT_EN_Y, F_ACTIVE_INT_EN_X,
+ /* Int_Set_1 */
+ F_NEW_DATA_INT_EN, F_FREEFALL_INT_EN,
+ /* Int_Map_0 */
+ F_INT1_ORIENT, F_INT1_S_TAP, F_INT1_D_TAP, F_INT1_ACTIVE,
+ F_INT1_FREEFALL,
+ /* Int_Map_1 */
+ F_INT1_NEW_DATA,
+ /* Int_Config */
+ F_INT1_OD, F_INT1_LVL,
+ /* Int_Latch */
+ F_RESET_INT, F_LATCH_INT,
+ /* Freefall_Hy */
+ F_FREEFALL_MODE, F_FREEFALL_HY,
+ /* Active_Dur */
+ F_ACTIVE_DUR,
+ /* Tap_Dur */
+ F_TAP_QUIET, F_TAP_SHOCK, F_TAP_DUR,
+ /* Tap_Th */
+ F_TAP_TH,
+ /* Orient_Hy */
+ F_ORIENT_HYST, F_ORIENT_BLOCKING, F_ORIENT_MODE,
+ /* Z_Block */
+ F_Z_BLOCKING,
+ /* End of register map */
+ F_MAX_FIELDS,
+};
+
+static const struct reg_field msa311_reg_fields[] = {
+ /* Soft_Reset */
+ [F_SOFT_RESET_I2C] = REG_FIELD(MSA311_SOFT_RESET_REG, 2, 2),
+ [F_SOFT_RESET_SPI] = REG_FIELD(MSA311_SOFT_RESET_REG, 5, 5),
+ /* Motion_Interrupt */
+ [F_ORIENT_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 6, 6),
+ [F_S_TAP_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 5, 5),
+ [F_D_TAP_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 4, 4),
+ [F_ACTIVE_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 2, 2),
+ [F_FREEFALL_INT] = REG_FIELD(MSA311_MOTION_INT_REG, 0, 0),
+ /* Data_Interrupt */
+ [F_NEW_DATA_INT] = REG_FIELD(MSA311_DATA_INT_REG, 0, 0),
+ /* Tap_Active_Status */
+ [F_TAP_SIGN] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 7, 7),
+ [F_TAP_FIRST_X] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 6, 6),
+ [F_TAP_FIRST_Y] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 5, 5),
+ [F_TAP_FIRST_Z] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 4, 4),
+ [F_ACTV_SIGN] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 3, 3),
+ [F_ACTV_FIRST_X] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 2, 2),
+ [F_ACTV_FIRST_Y] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 1, 1),
+ [F_ACTV_FIRST_Z] = REG_FIELD(MSA311_TAP_ACTIVE_STS_REG, 0, 0),
+ /* Orientation_Status */
+ [F_ORIENT_Z] = REG_FIELD(MSA311_ORIENT_STS_REG, 6, 6),
+ [F_ORIENT_X_Y] = REG_FIELD(MSA311_ORIENT_STS_REG, 4, 5),
+ /* Range */
+ [F_FS] = REG_FIELD(MSA311_RANGE_REG, 0, 1),
+ /* ODR */
+ [F_X_AXIS_DIS] = REG_FIELD(MSA311_ODR_REG, 7, 7),
+ [F_Y_AXIS_DIS] = REG_FIELD(MSA311_ODR_REG, 6, 6),
+ [F_Z_AXIS_DIS] = REG_FIELD(MSA311_ODR_REG, 5, 5),
+ [F_ODR] = REG_FIELD(MSA311_ODR_REG, 0, 3),
+ /* Power Mode/Bandwidth */
+ [F_PWR_MODE] = REG_FIELD(MSA311_PWR_MODE_REG, 6, 7),
+ [F_LOW_POWER_BW] = REG_FIELD(MSA311_PWR_MODE_REG, 1, 4),
+ /* Swap_Polarity */
+ [F_X_POLARITY] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 3, 3),
+ [F_Y_POLARITY] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 2, 2),
+ [F_Z_POLARITY] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 1, 1),
+ [F_X_Y_SWAP] = REG_FIELD(MSA311_SWAP_POLARITY_REG, 0, 0),
+ /* Int_Set_0 */
+ [F_ORIENT_INT_EN] = REG_FIELD(MSA311_INT_SET_0_REG, 6, 6),
+ [F_S_TAP_INT_EN] = REG_FIELD(MSA311_INT_SET_0_REG, 5, 5),
+ [F_D_TAP_INT_EN] = REG_FIELD(MSA311_INT_SET_0_REG, 4, 4),
+ [F_ACTIVE_INT_EN_Z] = REG_FIELD(MSA311_INT_SET_0_REG, 2, 2),
+ [F_ACTIVE_INT_EN_Y] = REG_FIELD(MSA311_INT_SET_0_REG, 1, 1),
+ [F_ACTIVE_INT_EN_X] = REG_FIELD(MSA311_INT_SET_0_REG, 0, 0),
+ /* Int_Set_1 */
+ [F_NEW_DATA_INT_EN] = REG_FIELD(MSA311_INT_SET_1_REG, 4, 4),
+ [F_FREEFALL_INT_EN] = REG_FIELD(MSA311_INT_SET_1_REG, 3, 3),
+ /* Int_Map_0 */
+ [F_INT1_ORIENT] = REG_FIELD(MSA311_INT_MAP_0_REG, 6, 6),
+ [F_INT1_S_TAP] = REG_FIELD(MSA311_INT_MAP_0_REG, 5, 5),
+ [F_INT1_D_TAP] = REG_FIELD(MSA311_INT_MAP_0_REG, 4, 4),
+ [F_INT1_ACTIVE] = REG_FIELD(MSA311_INT_MAP_0_REG, 2, 2),
+ [F_INT1_FREEFALL] = REG_FIELD(MSA311_INT_MAP_0_REG, 0, 0),
+ /* Int_Map_1 */
+ [F_INT1_NEW_DATA] = REG_FIELD(MSA311_INT_MAP_1_REG, 0, 0),
+ /* Int_Config */
+ [F_INT1_OD] = REG_FIELD(MSA311_INT_CONFIG_REG, 1, 1),
+ [F_INT1_LVL] = REG_FIELD(MSA311_INT_CONFIG_REG, 0, 0),
+ /* Int_Latch */
+ [F_RESET_INT] = REG_FIELD(MSA311_INT_LATCH_REG, 7, 7),
+ [F_LATCH_INT] = REG_FIELD(MSA311_INT_LATCH_REG, 0, 3),
+ /* Freefall_Hy */
+ [F_FREEFALL_MODE] = REG_FIELD(MSA311_FREEFALL_HY_REG, 2, 2),
+ [F_FREEFALL_HY] = REG_FIELD(MSA311_FREEFALL_HY_REG, 0, 1),
+ /* Active_Dur */
+ [F_ACTIVE_DUR] = REG_FIELD(MSA311_ACTIVE_DUR_REG, 0, 1),
+ /* Tap_Dur */
+ [F_TAP_QUIET] = REG_FIELD(MSA311_TAP_DUR_REG, 7, 7),
+ [F_TAP_SHOCK] = REG_FIELD(MSA311_TAP_DUR_REG, 6, 6),
+ [F_TAP_DUR] = REG_FIELD(MSA311_TAP_DUR_REG, 0, 2),
+ /* Tap_Th */
+ [F_TAP_TH] = REG_FIELD(MSA311_TAP_TH_REG, 0, 4),
+ /* Orient_Hy */
+ [F_ORIENT_HYST] = REG_FIELD(MSA311_ORIENT_HY_REG, 4, 6),
+ [F_ORIENT_BLOCKING] = REG_FIELD(MSA311_ORIENT_HY_REG, 2, 3),
+ [F_ORIENT_MODE] = REG_FIELD(MSA311_ORIENT_HY_REG, 0, 1),
+ /* Z_Block */
+ [F_Z_BLOCKING] = REG_FIELD(MSA311_Z_BLOCK_REG, 0, 3),
+};
+
+#define MSA311_WHO_AM_I 0x13
+
+/*
+ * Possible Full Scale ranges
+ *
+ * Axis data is 12-bit signed value, so
+ *
+ * fs0 = (2 + 2) * 9.81 / (2^11) = 0.009580
+ * fs1 = (4 + 4) * 9.81 / (2^11) = 0.019160
+ * fs2 = (8 + 8) * 9.81 / (2^11) = 0.038320
+ * fs3 = (16 + 16) * 9.81 / (2^11) = 0.076641
+ */
+enum {
+ MSA311_FS_2G,
+ MSA311_FS_4G,
+ MSA311_FS_8G,
+ MSA311_FS_16G,
+};
+
+struct iio_decimal_fract {
+ int integral;
+ int microfract;
+};
+
+static const struct iio_decimal_fract msa311_fs_table[] = {
+ {0, 9580}, {0, 19160}, {0, 38320}, {0, 76641},
+};
+
+/* Possible Output Data Rate values */
+enum {
+ MSA311_ODR_1_HZ,
+ MSA311_ODR_1_95_HZ,
+ MSA311_ODR_3_9_HZ,
+ MSA311_ODR_7_81_HZ,
+ MSA311_ODR_15_63_HZ,
+ MSA311_ODR_31_25_HZ,
+ MSA311_ODR_62_5_HZ,
+ MSA311_ODR_125_HZ,
+ MSA311_ODR_250_HZ,
+ MSA311_ODR_500_HZ,
+ MSA311_ODR_1000_HZ,
+};
+
+static const struct iio_decimal_fract msa311_odr_table[] = {
+ {1, 0}, {1, 950000}, {3, 900000}, {7, 810000}, {15, 630000},
+ {31, 250000}, {62, 500000}, {125, 0}, {250, 0}, {500, 0}, {1000, 0},
+};
+
+/* All supported power modes */
+#define MSA311_PWR_MODE_NORMAL 0b00
+#define MSA311_PWR_MODE_LOW 0b01
+#define MSA311_PWR_MODE_UNKNOWN 0b10
+#define MSA311_PWR_MODE_SUSPEND 0b11
+static const char * const msa311_pwr_modes[] = {
+ [MSA311_PWR_MODE_NORMAL] = "normal",
+ [MSA311_PWR_MODE_LOW] = "low",
+ [MSA311_PWR_MODE_UNKNOWN] = "unknown",
+ [MSA311_PWR_MODE_SUSPEND] = "suspend",
+};
+
+/* Autosuspend delay */
+#define MSA311_PWR_SLEEP_DELAY_MS 2000
+
+/* Possible INT1 types and levels */
+enum {
+ MSA311_INT1_OD_PUSH_PULL,
+ MSA311_INT1_OD_OPEN_DRAIN,
+};
+
+enum {
+ MSA311_INT1_LVL_LOW,
+ MSA311_INT1_LVL_HIGH,
+};
+
+/* Latch INT modes */
+#define MSA311_LATCH_INT_NOT_LATCHED 0b0000
+#define MSA311_LATCH_INT_250MS 0b0001
+#define MSA311_LATCH_INT_500MS 0b0010
+#define MSA311_LATCH_INT_1S 0b0011
+#define MSA311_LATCH_INT_2S 0b0100
+#define MSA311_LATCH_INT_4S 0b0101
+#define MSA311_LATCH_INT_8S 0b0110
+#define MSA311_LATCH_INT_1MS 0b1010
+#define MSA311_LATCH_INT_2MS 0b1011
+#define MSA311_LATCH_INT_25MS 0b1100
+#define MSA311_LATCH_INT_50MS 0b1101
+#define MSA311_LATCH_INT_100MS 0b1110
+#define MSA311_LATCH_INT_LATCHED 0b0111
+
+static const struct regmap_range msa311_readonly_registers[] = {
+ regmap_reg_range(MSA311_PARTID_REG, MSA311_ORIENT_STS_REG),
+};
+
+static const struct regmap_access_table msa311_writeable_table = {
+ .no_ranges = msa311_readonly_registers,
+ .n_no_ranges = ARRAY_SIZE(msa311_readonly_registers),
+};
+
+static const struct regmap_range msa311_writeonly_registers[] = {
+ regmap_reg_range(MSA311_SOFT_RESET_REG, MSA311_SOFT_RESET_REG),
+};
+
+static const struct regmap_access_table msa311_readable_table = {
+ .no_ranges = msa311_writeonly_registers,
+ .n_no_ranges = ARRAY_SIZE(msa311_writeonly_registers),
+};
+
+static const struct regmap_range msa311_volatile_registers[] = {
+ regmap_reg_range(MSA311_ACC_X_REG, MSA311_ORIENT_STS_REG),
+};
+
+static const struct regmap_access_table msa311_volatile_table = {
+ .yes_ranges = msa311_volatile_registers,
+ .n_yes_ranges = ARRAY_SIZE(msa311_volatile_registers),
+};
+
+static const struct regmap_config msa311_regmap_config = {
+ .name = "msa311",
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MSA311_OFFSET_Z_REG,
+ .wr_table = &msa311_writeable_table,
+ .rd_table = &msa311_readable_table,
+ .volatile_table = &msa311_volatile_table,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+#define MSA311_GENMASK(field) ({ \
+ typeof(&(msa311_reg_fields)[0]) _field; \
+ _field = &msa311_reg_fields[(field)]; \
+ GENMASK(_field->msb, _field->lsb); \
+})
+
+/**
+ * struct msa311_priv - MSA311 internal private state
+ * @regs: Underlying I2C bus adapter used to abstract slave
+ * register accesses
+ * @fields: Abstract objects for each registers fields access
+ * @dev: Device handler associated with appropriate bus client
+ * @lock: Protects msa311 device state between setup and data access routines
+ * (power transitions, samp_freq/scale tune, retrieving axes data, etc)
+ * @chip_name: Chip name in the format "msa311-%02x" % partid
+ * @new_data_trig: Optional NEW_DATA interrupt driven trigger used
+ * to notify external consumers a new sample is ready
+ * @vdd: Optional external voltage regulator for the device power supply
+ */
+struct msa311_priv {
+ struct regmap *regs;
+ struct regmap_field *fields[F_MAX_FIELDS];
+
+ struct device *dev;
+ struct mutex lock;
+ char *chip_name;
+
+ struct iio_trigger *new_data_trig;
+ struct regulator *vdd;
+};
+
+enum msa311_si {
+ MSA311_SI_X,
+ MSA311_SI_Y,
+ MSA311_SI_Z,
+ MSA311_SI_TIMESTAMP,
+};
+
+#define MSA311_ACCEL_CHANNEL(axis) { \
+ .type = IIO_ACCEL, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = MSA311_SI_##axis, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 12, \
+ .storagebits = 16, \
+ .shift = 4, \
+ .endianness = IIO_LE, \
+ }, \
+ .datasheet_name = "ACC_"#axis, \
+}
+
+static const struct iio_chan_spec msa311_channels[] = {
+ MSA311_ACCEL_CHANNEL(X),
+ MSA311_ACCEL_CHANNEL(Y),
+ MSA311_ACCEL_CHANNEL(Z),
+ IIO_CHAN_SOFT_TIMESTAMP(MSA311_SI_TIMESTAMP),
+};
+
+/**
+ * msa311_get_odr() - Read Output Data Rate (ODR) value from MSA311 accel
+ * @msa311: MSA311 internal private state
+ * @odr: output ODR value
+ *
+ * This function should be called under msa311->lock.
+ *
+ * Return: 0 on success, -ERRNO in other failures
+ */
+static int msa311_get_odr(struct msa311_priv *msa311, unsigned int *odr)
+{
+ int err;
+
+ err = regmap_field_read(msa311->fields[F_ODR], odr);
+ if (err)
+ return err;
+
+ /*
+ * Filter the same 1000Hz ODR register values based on datasheet info.
+ * ODR can be equal to 1010-1111 for 1000Hz, but function returns 1010
+ * all the time.
+ */
+ if (*odr > MSA311_ODR_1000_HZ)
+ *odr = MSA311_ODR_1000_HZ;
+
+ return 0;
+}
+
+/**
+ * msa311_set_odr() - Setup Output Data Rate (ODR) value for MSA311 accel
+ * @msa311: MSA311 internal private state
+ * @odr: requested ODR value
+ *
+ * This function should be called under msa311->lock. Possible ODR values:
+ * - 1Hz (not available in normal mode)
+ * - 1.95Hz (not available in normal mode)
+ * - 3.9Hz
+ * - 7.81Hz
+ * - 15.63Hz
+ * - 31.25Hz
+ * - 62.5Hz
+ * - 125Hz
+ * - 250Hz
+ * - 500Hz
+ * - 1000Hz
+ *
+ * Return: 0 on success, -EINVAL for bad ODR value in the certain power mode,
+ * -ERRNO in other failures
+ */
+static int msa311_set_odr(struct msa311_priv *msa311, unsigned int odr)
+{
+ struct device *dev = msa311->dev;
+ unsigned int pwr_mode;
+ bool good_odr;
+ int err;
+
+ err = regmap_field_read(msa311->fields[F_PWR_MODE], &pwr_mode);
+ if (err)
+ return err;
+
+ /* Filter bad ODR values */
+ if (pwr_mode == MSA311_PWR_MODE_NORMAL)
+ good_odr = (odr > MSA311_ODR_1_95_HZ);
+ else
+ good_odr = false;
+
+ if (!good_odr) {
+ dev_err(dev,
+ "can't set odr %u.%06uHz, not available in %s mode\n",
+ msa311_odr_table[odr].integral,
+ msa311_odr_table[odr].microfract,
+ msa311_pwr_modes[pwr_mode]);
+ return -EINVAL;
+ }
+
+ return regmap_field_write(msa311->fields[F_ODR], odr);
+}
+
+/**
+ * msa311_wait_for_next_data() - Wait next accel data available after resume
+ * @msa311: MSA311 internal private state
+ *
+ * Return: 0 on success, -EINTR if msleep() was interrupted,
+ * -ERRNO in other failures
+ */
+static int msa311_wait_for_next_data(struct msa311_priv *msa311)
+{
+ static const unsigned int unintr_thresh_ms = 20;
+ struct device *dev = msa311->dev;
+ unsigned long freq_uhz;
+ unsigned long wait_ms;
+ unsigned int odr;
+ int err;
+
+ err = msa311_get_odr(msa311, &odr);
+ if (err) {
+ dev_err(dev, "can't get actual frequency (%pe)\n",
+ ERR_PTR(err));
+ return err;
+ }
+
+ /*
+ * After msa311 resuming is done, we need to wait for data
+ * to be refreshed by accel logic.
+ * A certain timeout is calculated based on the current ODR value.
+ * If requested timeout isn't so long (let's assume 20ms),
+ * we can wait for next data in uninterruptible sleep.
+ */
+ freq_uhz = msa311_odr_table[odr].integral * MICROHZ_PER_HZ +
+ msa311_odr_table[odr].microfract;
+ wait_ms = (MICROHZ_PER_HZ / freq_uhz) * MSEC_PER_SEC;
+
+ if (wait_ms < unintr_thresh_ms)
+ usleep_range(wait_ms * USEC_PER_MSEC,
+ unintr_thresh_ms * USEC_PER_MSEC);
+ else if (msleep_interruptible(wait_ms))
+ return -EINTR;
+
+ return 0;
+}
+
+/**
+ * msa311_set_pwr_mode() - Install certain MSA311 power mode
+ * @msa311: MSA311 internal private state
+ * @mode: Power mode can be equal to NORMAL or SUSPEND
+ *
+ * This function should be called under msa311->lock.
+ *
+ * Return: 0 on success, -ERRNO on failure
+ */
+static int msa311_set_pwr_mode(struct msa311_priv *msa311, unsigned int mode)
+{
+ struct device *dev = msa311->dev;
+ unsigned int prev_mode;
+ int err;
+
+ if (mode >= ARRAY_SIZE(msa311_pwr_modes))
+ return -EINVAL;
+
+ dev_dbg(dev, "transition to %s mode\n", msa311_pwr_modes[mode]);
+
+ err = regmap_field_read(msa311->fields[F_PWR_MODE], &prev_mode);
+ if (err)
+ return err;
+
+ err = regmap_field_write(msa311->fields[F_PWR_MODE], mode);
+ if (err)
+ return err;
+
+ /* Wait actual data if we wake up */
+ if (prev_mode == MSA311_PWR_MODE_SUSPEND &&
+ mode == MSA311_PWR_MODE_NORMAL)
+ return msa311_wait_for_next_data(msa311);
+
+ return 0;
+}
+
+/**
+ * msa311_get_axis() - Read MSA311 accel data for certain IIO channel axis spec
+ * @msa311: MSA311 internal private state
+ * @chan: IIO channel specification
+ * @axis: Output accel axis data for requested IIO channel spec
+ *
+ * This function should be called under msa311->lock.
+ *
+ * Return: 0 on success, -EINVAL for unknown IIO channel specification,
+ * -ERRNO in other failures
+ */
+static int msa311_get_axis(struct msa311_priv *msa311,
+ const struct iio_chan_spec * const chan,
+ __le16 *axis)
+{
+ struct device *dev = msa311->dev;
+ unsigned int axis_reg;
+
+ if (chan->scan_index < MSA311_SI_X || chan->scan_index > MSA311_SI_Z) {
+ dev_err(dev, "invalid scan_index value [%d]\n",
+ chan->scan_index);
+ return -EINVAL;
+ }
+
+ /* Axes data layout has 2 byte gap for each axis starting from X axis */
+ axis_reg = MSA311_ACC_X_REG + (chan->scan_index << 1);
+
+ return regmap_bulk_read(msa311->regs, axis_reg, axis, sizeof(*axis));
+}
+
+static int msa311_read_raw_data(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2)
+{
+ struct msa311_priv *msa311 = iio_priv(indio_dev);
+ struct device *dev = msa311->dev;
+ __le16 axis;
+ int err;
+
+ err = pm_runtime_resume_and_get(dev);
+ if (err)
+ return err;
+
+ err = iio_device_claim_direct_mode(indio_dev);
+ if (err)
+ return err;
+
+ mutex_lock(&msa311->lock);
+ err = msa311_get_axis(msa311, chan, &axis);
+ mutex_unlock(&msa311->lock);
+
+ iio_device_release_direct_mode(indio_dev);
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ if (err) {
+ dev_err(dev, "can't get axis %s (%pe)\n",
+ chan->datasheet_name, ERR_PTR(err));
+ return err;
+ }
+
+ /*
+ * Axis data format is:
+ * ACC_X = (ACC_X_MSB[7:0] << 4) | ACC_X_LSB[7:4]
+ */
+ *val = sign_extend32(le16_to_cpu(axis) >> chan->scan_type.shift,
+ chan->scan_type.realbits - 1);
+
+ return IIO_VAL_INT;
+}
+
+static int msa311_read_scale(struct iio_dev *indio_dev, int *val, int *val2)
+{
+ struct msa311_priv *msa311 = iio_priv(indio_dev);
+ struct device *dev = msa311->dev;
+ unsigned int fs;
+ int err;
+
+ mutex_lock(&msa311->lock);
+ err = regmap_field_read(msa311->fields[F_FS], &fs);
+ mutex_unlock(&msa311->lock);
+ if (err) {
+ dev_err(dev, "can't get actual scale (%pe)\n", ERR_PTR(err));
+ return err;
+ }
+
+ *val = msa311_fs_table[fs].integral;
+ *val2 = msa311_fs_table[fs].microfract;
+
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int msa311_read_samp_freq(struct iio_dev *indio_dev,
+ int *val, int *val2)
+{
+ struct msa311_priv *msa311 = iio_priv(indio_dev);
+ struct device *dev = msa311->dev;
+ unsigned int odr;
+ int err;
+
+ mutex_lock(&msa311->lock);
+ err = msa311_get_odr(msa311, &odr);
+ mutex_unlock(&msa311->lock);
+ if (err) {
+ dev_err(dev, "can't get actual frequency (%pe)\n",
+ ERR_PTR(err));
+ return err;
+ }
+
+ *val = msa311_odr_table[odr].integral;
+ *val2 = msa311_odr_table[odr].microfract;
+
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int msa311_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ return msa311_read_raw_data(indio_dev, chan, val, val2);
+
+ case IIO_CHAN_INFO_SCALE:
+ return msa311_read_scale(indio_dev, val, val2);
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return msa311_read_samp_freq(indio_dev, val, val2);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int msa311_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type,
+ int *length, long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *vals = (int *)msa311_odr_table;
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ /* ODR value has 2 ints (integer and fractional parts) */
+ *length = ARRAY_SIZE(msa311_odr_table) * 2;
+ return IIO_AVAIL_LIST;
+
+ case IIO_CHAN_INFO_SCALE:
+ *vals = (int *)msa311_fs_table;
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ /* FS value has 2 ints (integer and fractional parts) */
+ *length = ARRAY_SIZE(msa311_fs_table) * 2;
+ return IIO_AVAIL_LIST;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int msa311_write_scale(struct iio_dev *indio_dev, int val, int val2)
+{
+ struct msa311_priv *msa311 = iio_priv(indio_dev);
+ struct device *dev = msa311->dev;
+ unsigned int fs;
+ int err;
+
+ /* We do not have fs >= 1, so skip such values */
+ if (val)
+ return 0;
+
+ err = pm_runtime_resume_and_get(dev);
+ if (err)
+ return err;
+
+ err = -EINVAL;
+ for (fs = 0; fs < ARRAY_SIZE(msa311_fs_table); fs++)
+ /* Do not check msa311_fs_table[fs].integral, it's always 0 */
+ if (val2 == msa311_fs_table[fs].microfract) {
+ mutex_lock(&msa311->lock);
+ err = regmap_field_write(msa311->fields[F_FS], fs);
+ mutex_unlock(&msa311->lock);
+ break;
+ }
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ if (err)
+ dev_err(dev, "can't update scale (%pe)\n", ERR_PTR(err));
+
+ return err;
+}
+
+static int msa311_write_samp_freq(struct iio_dev *indio_dev, int val, int val2)
+{
+ struct msa311_priv *msa311 = iio_priv(indio_dev);
+ struct device *dev = msa311->dev;
+ unsigned int odr;
+ int err;
+
+ err = pm_runtime_resume_and_get(dev);
+ if (err)
+ return err;
+
+ /*
+ * Sampling frequency changing is prohibited when buffer mode is
+ * enabled, because sometimes MSA311 chip returns outliers during
+ * frequency values growing up in the read operation moment.
+ */
+ err = iio_device_claim_direct_mode(indio_dev);
+ if (err)
+ return err;
+
+ err = -EINVAL;
+ for (odr = 0; odr < ARRAY_SIZE(msa311_odr_table); odr++)
+ if (val == msa311_odr_table[odr].integral &&
+ val2 == msa311_odr_table[odr].microfract) {
+ mutex_lock(&msa311->lock);
+ err = msa311_set_odr(msa311, odr);
+ mutex_unlock(&msa311->lock);
+ break;
+ }
+
+ iio_device_release_direct_mode(indio_dev);
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ if (err)
+ dev_err(dev, "can't update frequency (%pe)\n", ERR_PTR(err));
+
+ return err;
+}
+
+static int msa311_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ return msa311_write_scale(indio_dev, val, val2);
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return msa311_write_samp_freq(indio_dev, val, val2);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int msa311_debugfs_reg_access(struct iio_dev *indio_dev,
+ unsigned int reg, unsigned int writeval,
+ unsigned int *readval)
+{
+ struct msa311_priv *msa311 = iio_priv(indio_dev);
+ struct device *dev = msa311->dev;
+ int err;
+
+ if (reg > regmap_get_max_register(msa311->regs))
+ return -EINVAL;
+
+ err = pm_runtime_resume_and_get(dev);
+ if (err)
+ return err;
+
+ mutex_lock(&msa311->lock);
+
+ if (readval)
+ err = regmap_read(msa311->regs, reg, readval);
+ else
+ err = regmap_write(msa311->regs, reg, writeval);
+
+ mutex_unlock(&msa311->lock);
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ if (err)
+ dev_err(dev, "can't %s register %u from debugfs (%pe)\n",
+ str_read_write(readval), reg, ERR_PTR(err));
+
+ return err;
+}
+
+static int msa311_buffer_preenable(struct iio_dev *indio_dev)
+{
+ struct msa311_priv *msa311 = iio_priv(indio_dev);
+ struct device *dev = msa311->dev;
+
+ return pm_runtime_resume_and_get(dev);
+}
+
+static int msa311_buffer_postdisable(struct iio_dev *indio_dev)
+{
+ struct msa311_priv *msa311 = iio_priv(indio_dev);
+ struct device *dev = msa311->dev;
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ return 0;
+}
+
+static int msa311_set_new_data_trig_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+ struct msa311_priv *msa311 = iio_priv(indio_dev);
+ struct device *dev = msa311->dev;
+ int err;
+
+ mutex_lock(&msa311->lock);
+ err = regmap_field_write(msa311->fields[F_NEW_DATA_INT_EN], state);
+ mutex_unlock(&msa311->lock);
+ if (err)
+ dev_err(dev,
+ "can't %s buffer due to new_data_int failure (%pe)\n",
+ str_enable_disable(state), ERR_PTR(err));
+
+ return err;
+}
+
+static int msa311_validate_device(struct iio_trigger *trig,
+ struct iio_dev *indio_dev)
+{
+ return iio_trigger_get_drvdata(trig) == indio_dev ? 0 : -EINVAL;
+}
+
+static irqreturn_t msa311_buffer_thread(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct msa311_priv *msa311 = iio_priv(pf->indio_dev);
+ struct iio_dev *indio_dev = pf->indio_dev;
+ const struct iio_chan_spec *chan;
+ struct device *dev = msa311->dev;
+ int bit, err, i = 0;
+ __le16 axis;
+ struct {
+ __le16 channels[MSA311_SI_Z + 1];
+ s64 ts __aligned(8);
+ } buf;
+
+ memset(&buf, 0, sizeof(buf));
+
+ mutex_lock(&msa311->lock);
+
+ for_each_set_bit(bit, indio_dev->active_scan_mask,
+ indio_dev->masklength) {
+ chan = &msa311_channels[bit];
+
+ err = msa311_get_axis(msa311, chan, &axis);
+ if (err) {
+ mutex_unlock(&msa311->lock);
+ dev_err(dev, "can't get axis %s (%pe)\n",
+ chan->datasheet_name, ERR_PTR(err));
+ goto notify_done;
+ }
+
+ buf.channels[i++] = axis;
+ }
+
+ mutex_unlock(&msa311->lock);
+
+ iio_push_to_buffers_with_timestamp(indio_dev, &buf,
+ iio_get_time_ns(indio_dev));
+
+notify_done:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t msa311_irq_thread(int irq, void *p)
+{
+ struct msa311_priv *msa311 = iio_priv(p);
+ unsigned int new_data_int_enabled;
+ struct device *dev = msa311->dev;
+ int err;
+
+ mutex_lock(&msa311->lock);
+
+ /*
+ * We do not check NEW_DATA int status, because based on the
+ * specification it's cleared automatically after a fixed time.
+ * So just check that is enabled by driver logic.
+ */
+ err = regmap_field_read(msa311->fields[F_NEW_DATA_INT_EN],
+ &new_data_int_enabled);
+
+ mutex_unlock(&msa311->lock);
+ if (err) {
+ dev_err(dev, "can't read new_data interrupt state (%pe)\n",
+ ERR_PTR(err));
+ return IRQ_NONE;
+ }
+
+ if (new_data_int_enabled)
+ iio_trigger_poll_chained(msa311->new_data_trig);
+
+ return IRQ_HANDLED;
+}
+
+static const struct iio_info msa311_info = {
+ .read_raw = msa311_read_raw,
+ .read_avail = msa311_read_avail,
+ .write_raw = msa311_write_raw,
+ .debugfs_reg_access = msa311_debugfs_reg_access,
+};
+
+static const struct iio_buffer_setup_ops msa311_buffer_setup_ops = {
+ .preenable = msa311_buffer_preenable,
+ .postdisable = msa311_buffer_postdisable,
+};
+
+static const struct iio_trigger_ops msa311_new_data_trig_ops = {
+ .set_trigger_state = msa311_set_new_data_trig_state,
+ .validate_device = msa311_validate_device,
+};
+
+static int msa311_check_partid(struct msa311_priv *msa311)
+{
+ struct device *dev = msa311->dev;
+ unsigned int partid;
+ int err;
+
+ err = regmap_read(msa311->regs, MSA311_PARTID_REG, &partid);
+ if (err)
+ return dev_err_probe(dev, err, "failed to read partid\n");
+
+ if (partid != MSA311_WHO_AM_I)
+ dev_warn(dev, "invalid partid (%#x), expected (%#x)\n",
+ partid, MSA311_WHO_AM_I);
+
+ msa311->chip_name = devm_kasprintf(dev, GFP_KERNEL,
+ "msa311-%02x", partid);
+ if (!msa311->chip_name)
+ return dev_err_probe(dev, -ENOMEM, "can't alloc chip name\n");
+
+ return 0;
+}
+
+static int msa311_soft_reset(struct msa311_priv *msa311)
+{
+ struct device *dev = msa311->dev;
+ int err;
+
+ err = regmap_write(msa311->regs, MSA311_SOFT_RESET_REG,
+ MSA311_GENMASK(F_SOFT_RESET_I2C) |
+ MSA311_GENMASK(F_SOFT_RESET_SPI));
+ if (err)
+ return dev_err_probe(dev, err, "can't soft reset all logic\n");
+
+ return 0;
+}
+
+static int msa311_chip_init(struct msa311_priv *msa311)
+{
+ struct device *dev = msa311->dev;
+ const char zero_bulk[2] = { };
+ int err;
+
+ err = regmap_write(msa311->regs, MSA311_RANGE_REG, MSA311_FS_16G);
+ if (err)
+ return dev_err_probe(dev, err, "failed to setup accel range\n");
+
+ /* Disable all interrupts by default */
+ err = regmap_bulk_write(msa311->regs, MSA311_INT_SET_0_REG,
+ zero_bulk, sizeof(zero_bulk));
+ if (err)
+ return dev_err_probe(dev, err,
+ "can't disable set0/set1 interrupts\n");
+
+ /* Unmap all INT1 interrupts by default */
+ err = regmap_bulk_write(msa311->regs, MSA311_INT_MAP_0_REG,
+ zero_bulk, sizeof(zero_bulk));
+ if (err)
+ return dev_err_probe(dev, err,
+ "failed to unmap map0/map1 interrupts\n");
+
+ /* Disable all axes by default */
+ err = regmap_update_bits(msa311->regs, MSA311_ODR_REG,
+ MSA311_GENMASK(F_X_AXIS_DIS) |
+ MSA311_GENMASK(F_Y_AXIS_DIS) |
+ MSA311_GENMASK(F_Z_AXIS_DIS), 0);
+ if (err)
+ return dev_err_probe(dev, err, "can't enable all axes\n");
+
+ err = msa311_set_odr(msa311, MSA311_ODR_125_HZ);
+ if (err)
+ return dev_err_probe(dev, err,
+ "failed to set accel frequency\n");
+
+ return 0;
+}
+
+static int msa311_setup_interrupts(struct msa311_priv *msa311)
+{
+ struct device *dev = msa311->dev;
+ struct i2c_client *i2c = to_i2c_client(dev);
+ struct iio_dev *indio_dev = i2c_get_clientdata(i2c);
+ struct iio_trigger *trig;
+ int err;
+
+ /* Keep going without interrupts if no initialized I2C IRQ */
+ if (i2c->irq <= 0)
+ return 0;
+
+ err = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
+ msa311_irq_thread, IRQF_ONESHOT,
+ msa311->chip_name, indio_dev);
+ if (err)
+ return dev_err_probe(dev, err, "failed to request IRQ\n");
+
+ trig = devm_iio_trigger_alloc(dev, "%s-new-data", msa311->chip_name);
+ if (!trig)
+ return dev_err_probe(dev, -ENOMEM,
+ "can't allocate newdata trigger\n");
+
+ msa311->new_data_trig = trig;
+ msa311->new_data_trig->ops = &msa311_new_data_trig_ops;
+ iio_trigger_set_drvdata(msa311->new_data_trig, indio_dev);
+
+ err = devm_iio_trigger_register(dev, msa311->new_data_trig);
+ if (err)
+ return dev_err_probe(dev, err,
+ "can't register newdata trigger\n");
+
+ err = regmap_field_write(msa311->fields[F_INT1_OD],
+ MSA311_INT1_OD_PUSH_PULL);
+ if (err)
+ return dev_err_probe(dev, err,
+ "can't enable push-pull interrupt\n");
+
+ err = regmap_field_write(msa311->fields[F_INT1_LVL],
+ MSA311_INT1_LVL_HIGH);
+ if (err)
+ return dev_err_probe(dev, err,
+ "can't set active interrupt level\n");
+
+ err = regmap_field_write(msa311->fields[F_LATCH_INT],
+ MSA311_LATCH_INT_LATCHED);
+ if (err)
+ return dev_err_probe(dev, err,
+ "can't latch interrupt\n");
+
+ err = regmap_field_write(msa311->fields[F_RESET_INT], 1);
+ if (err)
+ return dev_err_probe(dev, err,
+ "can't reset interrupt\n");
+
+ err = regmap_field_write(msa311->fields[F_INT1_NEW_DATA], 1);
+ if (err)
+ return dev_err_probe(dev, err,
+ "can't map new data interrupt\n");
+
+ return 0;
+}
+
+static int msa311_regmap_init(struct msa311_priv *msa311)
+{
+ struct regmap_field **fields = msa311->fields;
+ struct device *dev = msa311->dev;
+ struct i2c_client *i2c = to_i2c_client(dev);
+ struct regmap *regmap;
+ int i;
+
+ regmap = devm_regmap_init_i2c(i2c, &msa311_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "failed to register i2c regmap\n");
+
+ msa311->regs = regmap;
+
+ for (i = 0; i < F_MAX_FIELDS; i++) {
+ fields[i] = devm_regmap_field_alloc(dev,
+ msa311->regs,
+ msa311_reg_fields[i]);
+ if (IS_ERR(msa311->fields[i]))
+ return dev_err_probe(dev, PTR_ERR(msa311->fields[i]),
+ "can't alloc field[%d]\n", i);
+ }
+
+ return 0;
+}
+
+static void msa311_powerdown(void *msa311)
+{
+ msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_SUSPEND);
+}
+
+static void msa311_vdd_disable(void *vdd)
+{
+ regulator_disable(vdd);
+}
+
+static int msa311_probe(struct i2c_client *i2c)
+{
+ struct device *dev = &i2c->dev;
+ struct msa311_priv *msa311;
+ struct iio_dev *indio_dev;
+ int err;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*msa311));
+ if (!indio_dev)
+ return dev_err_probe(dev, -ENOMEM,
+ "IIO device allocation failed\n");
+
+ msa311 = iio_priv(indio_dev);
+ msa311->dev = dev;
+ i2c_set_clientdata(i2c, indio_dev);
+
+ err = msa311_regmap_init(msa311);
+ if (err)
+ return err;
+
+ mutex_init(&msa311->lock);
+
+ msa311->vdd = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(msa311->vdd))
+ return dev_err_probe(dev, PTR_ERR(msa311->vdd),
+ "can't get vdd supply\n");
+
+ err = regulator_enable(msa311->vdd);
+ if (err)
+ return dev_err_probe(dev, err, "can't enable vdd supply\n");
+
+ err = devm_add_action_or_reset(dev, msa311_vdd_disable, msa311->vdd);
+ if (err)
+ return dev_err_probe(dev, err,
+ "can't add vdd disable action\n");
+
+ err = msa311_check_partid(msa311);
+ if (err)
+ return err;
+
+ err = msa311_soft_reset(msa311);
+ if (err)
+ return err;
+
+ err = msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_NORMAL);
+ if (err)
+ return dev_err_probe(dev, err, "failed to power on device\n");
+
+ /*
+ * Register powerdown deferred callback which suspends the chip
+ * after module unloaded.
+ *
+ * MSA311 should be in SUSPEND mode in the two cases:
+ * 1) When driver is loaded, but we do not have any data or
+ * configuration requests to it (we are solving it using
+ * autosuspend feature).
+ * 2) When driver is unloaded and device is not used (devm action is
+ * used in this case).
+ */
+ err = devm_add_action_or_reset(dev, msa311_powerdown, msa311);
+ if (err)
+ return dev_err_probe(dev, err, "can't add powerdown action\n");
+
+ err = pm_runtime_set_active(dev);
+ if (err)
+ return err;
+
+ err = devm_pm_runtime_enable(dev);
+ if (err)
+ return err;
+
+ pm_runtime_get_noresume(dev);
+ pm_runtime_set_autosuspend_delay(dev, MSA311_PWR_SLEEP_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
+
+ err = msa311_chip_init(msa311);
+ if (err)
+ return err;
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = msa311_channels;
+ indio_dev->num_channels = ARRAY_SIZE(msa311_channels);
+ indio_dev->name = msa311->chip_name;
+ indio_dev->info = &msa311_info;
+
+ err = devm_iio_triggered_buffer_setup(dev, indio_dev,
+ iio_pollfunc_store_time,
+ msa311_buffer_thread,
+ &msa311_buffer_setup_ops);
+ if (err)
+ return dev_err_probe(dev, err,
+ "can't setup IIO trigger buffer\n");
+
+ err = msa311_setup_interrupts(msa311);
+ if (err)
+ return err;
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ err = devm_iio_device_register(dev, indio_dev);
+ if (err)
+ return dev_err_probe(dev, err, "IIO device register failed\n");
+
+ return 0;
+}
+
+static int msa311_runtime_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct msa311_priv *msa311 = iio_priv(indio_dev);
+ int err;
+
+ mutex_lock(&msa311->lock);
+ err = msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_SUSPEND);
+ mutex_unlock(&msa311->lock);
+ if (err)
+ dev_err(dev, "failed to power off device (%pe)\n",
+ ERR_PTR(err));
+
+ return err;
+}
+
+static int msa311_runtime_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct msa311_priv *msa311 = iio_priv(indio_dev);
+ int err;
+
+ mutex_lock(&msa311->lock);
+ err = msa311_set_pwr_mode(msa311, MSA311_PWR_MODE_NORMAL);
+ mutex_unlock(&msa311->lock);
+ if (err)
+ dev_err(dev, "failed to power on device (%pe)\n",
+ ERR_PTR(err));
+
+ return err;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(msa311_pm_ops, msa311_runtime_suspend,
+ msa311_runtime_resume, NULL);
+
+static const struct i2c_device_id msa311_i2c_id[] = {
+ { .name = "msa311" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, msa311_i2c_id);
+
+static const struct of_device_id msa311_of_match[] = {
+ { .compatible = "memsensing,msa311" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, msa311_of_match);
+
+static struct i2c_driver msa311_driver = {
+ .driver = {
+ .name = "msa311",
+ .of_match_table = msa311_of_match,
+ .pm = pm_ptr(&msa311_pm_ops),
+ },
+ .probe_new = msa311_probe,
+ .id_table = msa311_i2c_id,
+};
+module_i2c_driver(msa311_driver);
+
+MODULE_AUTHOR("Dmitry Rokosov <ddrokosov@sberdevices.ru>");
+MODULE_DESCRIPTION("MEMSensing MSA311 3-axis accelerometer driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 7fe5930891e0..791612ca6012 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -653,6 +653,20 @@ config MAX1118
To compile this driver as a module, choose M here: the module will be
called max1118.
+config MAX11205
+ tristate "Maxim max11205 ADC driver"
+ depends on SPI
+ select AD_SIGMA_DELTA
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+
+ help
+ Say yes here to build support for Maxim max11205 16-bit, single-channel
+ ultra-low power delta-sigma ADC.
+
+ To compile this driver as a module, choose M here: the module will be
+ called max11205.
+
config MAX1241
tristate "Maxim max1241 ADC driver"
depends on SPI_MASTER
@@ -718,6 +732,8 @@ config MCP3422
config MCP3911
tristate "Microchip Technology MCP3911 driver"
depends on SPI
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for Microchip Technology's MCP3911
analog to digital converter.
@@ -919,6 +935,21 @@ config ROCKCHIP_SARADC
To compile this driver as a module, choose M here: the
module will be called rockchip_saradc.
+config RICHTEK_RTQ6056
+ tristate "Richtek RTQ6056 Current and Power Monitor ADC"
+ depends on I2C
+ select REGMAP_I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to enable RQT6056 ADC support.
+ RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
+ compatible interface, and the device provides full information for
+ system by reading out the load current and power.
+
+ This driver can also be built as a module. If so, the module will be
+ called rtq6056.
+
config RZG2L_ADC
tristate "Renesas RZ/G2L ADC driver"
depends on ARCH_RZG2L || COMPILE_TEST
@@ -1022,22 +1053,6 @@ config STMPE_ADC
Say yes here to build support for ST Microelectronics STMPE
built-in ADC block (stmpe811).
-config STX104
- tristate "Apex Embedded Systems STX104 driver"
- depends on PC104 && X86
- select ISA_BUS_API
- select GPIOLIB
- help
- Say yes here to build support for the Apex Embedded Systems STX104
- integrated analog PC/104 card.
-
- This driver supports the 16 channels of single-ended (8 channels of
- differential) analog inputs, 2 channels of analog output, 4 digital
- inputs, and 4 digital outputs provided by the STX104.
-
- The base port addresses for the devices may be configured via the base
- array module parameter.
-
config SUN4I_GPADC
tristate "Support for the Allwinner SoCs GPADC"
depends on IIO
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 1772a549a3c8..46caba7a010c 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_LTC2497) += ltc2497.o ltc2497-core.o
obj-$(CONFIG_MAX1027) += max1027.o
obj-$(CONFIG_MAX11100) += max11100.o
obj-$(CONFIG_MAX1118) += max1118.o
+obj-$(CONFIG_MAX11205) += max11205.o
obj-$(CONFIG_MAX1241) += max1241.o
obj-$(CONFIG_MAX1363) += max1363.o
obj-$(CONFIG_MAX9611) += max9611.o
@@ -85,10 +86,10 @@ obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o
obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o
obj-$(CONFIG_RN5T618_ADC) += rn5t618-adc.o
obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
+obj-$(CONFIG_RICHTEK_RTQ6056) += rtq6056.o
obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o
obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
-obj-$(CONFIG_STX104) += stx104.o
obj-$(CONFIG_SUN4I_GPADC) += sun4i-gpadc-iio.o
obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
obj-$(CONFIG_STM32_ADC) += stm32-adc.o
diff --git a/drivers/iio/adc/ab8500-gpadc.c b/drivers/iio/adc/ab8500-gpadc.c
index 930ce96e6ff5..4fa2126a354b 100644
--- a/drivers/iio/adc/ab8500-gpadc.c
+++ b/drivers/iio/adc/ab8500-gpadc.c
@@ -925,8 +925,8 @@ static int ab8500_gpadc_read_raw(struct iio_dev *indio_dev,
return -EINVAL;
}
-static int ab8500_gpadc_of_xlate(struct iio_dev *indio_dev,
- const struct of_phandle_args *iiospec)
+static int ab8500_gpadc_fwnode_xlate(struct iio_dev *indio_dev,
+ const struct fwnode_reference_args *iiospec)
{
int i;
@@ -938,7 +938,7 @@ static int ab8500_gpadc_of_xlate(struct iio_dev *indio_dev,
}
static const struct iio_info ab8500_gpadc_info = {
- .of_xlate = ab8500_gpadc_of_xlate,
+ .fwnode_xlate = ab8500_gpadc_fwnode_xlate,
.read_raw = ab8500_gpadc_read_raw,
};
@@ -968,7 +968,7 @@ static int ab8500_gpadc_runtime_resume(struct device *dev)
/**
* ab8500_gpadc_parse_channel() - process devicetree channel configuration
* @dev: pointer to containing device
- * @np: device tree node for the channel to configure
+ * @fwnode: fw node for the channel to configure
* @ch: channel info to fill in
* @iio_chan: IIO channel specification to fill in
*
@@ -976,15 +976,15 @@ static int ab8500_gpadc_runtime_resume(struct device *dev)
* and define usage for things like AUX GPADC inputs more precisely.
*/
static int ab8500_gpadc_parse_channel(struct device *dev,
- struct device_node *np,
+ struct fwnode_handle *fwnode,
struct ab8500_gpadc_chan_info *ch,
struct iio_chan_spec *iio_chan)
{
- const char *name = np->name;
+ const char *name = fwnode_get_name(fwnode);
u32 chan;
int ret;
- ret = of_property_read_u32(np, "reg", &chan);
+ ret = fwnode_property_read_u32(fwnode, "reg", &chan);
if (ret) {
dev_err(dev, "invalid channel number %s\n", name);
return ret;
@@ -1021,22 +1021,20 @@ static int ab8500_gpadc_parse_channel(struct device *dev,
/**
* ab8500_gpadc_parse_channels() - Parse the GPADC channels from DT
* @gpadc: the GPADC to configure the channels for
- * @np: device tree node containing the channel configurations
* @chans: the IIO channels we parsed
* @nchans: the number of IIO channels we parsed
*/
static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc,
- struct device_node *np,
struct iio_chan_spec **chans_parsed,
unsigned int *nchans_parsed)
{
- struct device_node *child;
+ struct fwnode_handle *child;
struct ab8500_gpadc_chan_info *ch;
struct iio_chan_spec *iio_chans;
unsigned int nchans;
int i;
- nchans = of_get_available_child_count(np);
+ nchans = device_get_child_node_count(gpadc->dev);
if (!nchans) {
dev_err(gpadc->dev, "no channel children\n");
return -ENODEV;
@@ -1054,7 +1052,7 @@ static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc,
return -ENOMEM;
i = 0;
- for_each_available_child_of_node(np, child) {
+ device_for_each_child_node(gpadc->dev, child) {
struct iio_chan_spec *iio_chan;
int ret;
@@ -1064,7 +1062,7 @@ static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc,
ret = ab8500_gpadc_parse_channel(gpadc->dev, child, ch,
iio_chan);
if (ret) {
- of_node_put(child);
+ fwnode_handle_put(child);
return ret;
}
i++;
@@ -1081,7 +1079,6 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
struct ab8500_gpadc *gpadc;
struct iio_dev *indio_dev;
struct device *dev = &pdev->dev;
- struct device_node *np = pdev->dev.of_node;
struct iio_chan_spec *iio_chans;
unsigned int n_iio_chans;
int ret;
@@ -1096,7 +1093,7 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
gpadc->dev = dev;
gpadc->ab8500 = dev_get_drvdata(dev->parent);
- ret = ab8500_gpadc_parse_channels(gpadc, np, &iio_chans, &n_iio_chans);
+ ret = ab8500_gpadc_parse_channels(gpadc, &iio_chans, &n_iio_chans);
if (ret)
return ret;
diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
index c5b785d8b241..4088786e1026 100644
--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
@@ -936,11 +936,6 @@ static void ad7124_reg_disable(void *r)
regulator_disable(r);
}
-static void ad7124_clk_disable(void *c)
-{
- clk_disable_unprepare(c);
-}
-
static int ad7124_probe(struct spi_device *spi)
{
const struct ad7124_chip_info *info;
@@ -993,18 +988,10 @@ static int ad7124_probe(struct spi_device *spi)
return ret;
}
- st->mclk = devm_clk_get(&spi->dev, "mclk");
+ st->mclk = devm_clk_get_enabled(&spi->dev, "mclk");
if (IS_ERR(st->mclk))
return PTR_ERR(st->mclk);
- ret = clk_prepare_enable(st->mclk);
- if (ret < 0)
- return ret;
-
- ret = devm_add_action_or_reset(&spi->dev, ad7124_clk_disable, st->mclk);
- if (ret)
- return ret;
-
ret = ad7124_soft_reset(st);
if (ret < 0)
return ret;
diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c
index 652db768ef37..70a25949142c 100644
--- a/drivers/iio/adc/ad7768-1.c
+++ b/drivers/iio/adc/ad7768-1.c
@@ -539,13 +539,6 @@ static void ad7768_regulator_disable(void *data)
regulator_disable(st->vref);
}
-static void ad7768_clk_disable(void *data)
-{
- struct ad7768_state *st = data;
-
- clk_disable_unprepare(st->mclk);
-}
-
static int ad7768_set_channel_label(struct iio_dev *indio_dev,
int num_channels)
{
@@ -600,18 +593,10 @@ static int ad7768_probe(struct spi_device *spi)
if (ret)
return ret;
- st->mclk = devm_clk_get(&spi->dev, "mclk");
+ st->mclk = devm_clk_get_enabled(&spi->dev, "mclk");
if (IS_ERR(st->mclk))
return PTR_ERR(st->mclk);
- ret = clk_prepare_enable(st->mclk);
- if (ret < 0)
- return ret;
-
- ret = devm_add_action_or_reset(&spi->dev, ad7768_clk_disable, st);
- if (ret)
- return ret;
-
st->mclk_freq = clk_get_rate(st->mclk);
mutex_init(&st->lock);
diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c
index edad1f30121d..9d6bf6d0927a 100644
--- a/drivers/iio/adc/ad7923.c
+++ b/drivers/iio/adc/ad7923.c
@@ -8,6 +8,7 @@
#include <linux/device.h>
#include <linux/kernel.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/spi/spi.h>
@@ -93,6 +94,7 @@ enum ad7923_id {
.sign = 'u', \
.realbits = (bits), \
.storagebits = 16, \
+ .shift = 12 - (bits), \
.endianness = IIO_BE, \
}, \
}
@@ -268,7 +270,8 @@ static int ad7923_read_raw(struct iio_dev *indio_dev,
return ret;
if (chan->address == EXTRACT(ret, 12, 4))
- *val = EXTRACT(ret, 0, 12);
+ *val = EXTRACT(ret, chan->scan_type.shift,
+ chan->scan_type.realbits);
else
return -EIO;
@@ -298,6 +301,7 @@ static void ad7923_regulator_disable(void *data)
static int ad7923_probe(struct spi_device *spi)
{
+ u32 ad7923_range = AD7923_RANGE;
struct ad7923_state *st;
struct iio_dev *indio_dev;
const struct ad7923_chip_info *info;
@@ -309,8 +313,11 @@ static int ad7923_probe(struct spi_device *spi)
st = iio_priv(indio_dev);
+ if (device_property_read_bool(&spi->dev, "adi,range-double"))
+ ad7923_range = 0;
+
st->spi = spi;
- st->settings = AD7923_CODING | AD7923_RANGE |
+ st->settings = AD7923_CODING | ad7923_range |
AD7923_PM_MODE_WRITE(AD7923_PM_MODE_OPS);
info = &ad7923_chip_info[spi_get_device_id(spi)->driver_data];
diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
index 5a5f33f7bc8f..7534572f7475 100644
--- a/drivers/iio/adc/ad9467.c
+++ b/drivers/iio/adc/ad9467.c
@@ -378,13 +378,6 @@ static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv)
return ad9467_outputmode_set(st->spi, st->output_mode);
}
-static void ad9467_clk_disable(void *data)
-{
- struct ad9467_state *st = data;
-
- clk_disable_unprepare(st->clk);
-}
-
static int ad9467_probe(struct spi_device *spi)
{
const struct ad9467_chip_info *info;
@@ -404,18 +397,10 @@ static int ad9467_probe(struct spi_device *spi)
st = adi_axi_adc_conv_priv(conv);
st->spi = spi;
- st->clk = devm_clk_get(&spi->dev, "adc-clk");
+ st->clk = devm_clk_get_enabled(&spi->dev, "adc-clk");
if (IS_ERR(st->clk))
return PTR_ERR(st->clk);
- ret = clk_prepare_enable(st->clk);
- if (ret < 0)
- return ret;
-
- ret = devm_add_action_or_reset(&spi->dev, ad9467_clk_disable, st);
- if (ret)
- return ret;
-
st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
GPIOD_OUT_LOW);
if (IS_ERR(st->pwrdown_gpio))
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index 279430c1d88c..4294d6539cdb 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -16,9 +16,11 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/sched.h>
+#include <linux/units.h>
#include <linux/wait.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@@ -26,9 +28,13 @@
#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
+#include <linux/nvmem-consumer.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
+
struct at91_adc_reg_layout {
/* Control Register */
u16 CR;
@@ -73,11 +79,14 @@ struct at91_adc_reg_layout {
/* Startup Time */
#define AT91_SAMA5D2_MR_STARTUP(v) ((v) << 16)
#define AT91_SAMA5D2_MR_STARTUP_MASK GENMASK(19, 16)
+/* Minimum startup time for temperature sensor */
+#define AT91_SAMA5D2_MR_STARTUP_TS_MIN (50)
/* Analog Change */
#define AT91_SAMA5D2_MR_ANACH BIT(23)
/* Tracking Time */
#define AT91_SAMA5D2_MR_TRACKTIM(v) ((v) << 24)
-#define AT91_SAMA5D2_MR_TRACKTIM_MAX 0xff
+#define AT91_SAMA5D2_MR_TRACKTIM_TS 6
+#define AT91_SAMA5D2_MR_TRACKTIM_MAX 0xf
/* Transfer Time */
#define AT91_SAMA5D2_MR_TRANSFER(v) ((v) << 28)
#define AT91_SAMA5D2_MR_TRANSFER_MAX 0x3
@@ -138,11 +147,19 @@ struct at91_adc_reg_layout {
/* Extended Mode Register */
u16 EMR;
/* Extended Mode Register - Oversampling rate */
-#define AT91_SAMA5D2_EMR_OSR(V) ((V) << 16)
-#define AT91_SAMA5D2_EMR_OSR_MASK GENMASK(17, 16)
+#define AT91_SAMA5D2_EMR_OSR(V, M) (((V) << 16) & (M))
#define AT91_SAMA5D2_EMR_OSR_1SAMPLES 0
#define AT91_SAMA5D2_EMR_OSR_4SAMPLES 1
#define AT91_SAMA5D2_EMR_OSR_16SAMPLES 2
+#define AT91_SAMA5D2_EMR_OSR_64SAMPLES 3
+#define AT91_SAMA5D2_EMR_OSR_256SAMPLES 4
+
+/* Extended Mode Register - TRACKX */
+#define AT91_SAMA5D2_TRACKX_MASK GENMASK(23, 22)
+#define AT91_SAMA5D2_TRACKX(x) (((x) << 22) & \
+ AT91_SAMA5D2_TRACKX_MASK)
+/* TRACKX for temperature sensor. */
+#define AT91_SAMA5D2_TRACKX_TS (1)
/* Extended Mode Register - Averaging on single trigger event */
#define AT91_SAMA5D2_EMR_ASTE(V) ((V) << 20)
@@ -159,6 +176,8 @@ struct at91_adc_reg_layout {
u16 ACR;
/* Analog Control Register - Pen detect sensitivity mask */
#define AT91_SAMA5D2_ACR_PENDETSENS_MASK GENMASK(1, 0)
+/* Analog Control Register - Source last channel */
+#define AT91_SAMA5D2_ACR_SRCLCH BIT(16)
/* Touchscreen Mode Register */
u16 TSMR;
@@ -226,6 +245,10 @@ struct at91_adc_reg_layout {
u16 WPSR;
/* Version Register */
u16 VERSION;
+/* Temperature Sensor Mode Register */
+ u16 TEMPMR;
+/* Temperature Sensor Mode - Temperature sensor on */
+#define AT91_SAMA5D2_TEMPMR_TEMPON BIT(0)
};
static const struct at91_adc_reg_layout sama5d2_layout = {
@@ -280,6 +303,7 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
.EOC_IDR = 0x38,
.EOC_IMR = 0x3c,
.EOC_ISR = 0x40,
+ .TEMPMR = 0x44,
.OVER = 0x4c,
.EMR = 0x50,
.CWR = 0x54,
@@ -305,11 +329,6 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
#define AT91_HWFIFO_MAX_SIZE_STR "128"
#define AT91_HWFIFO_MAX_SIZE 128
-/* Possible values for oversampling ratio */
-#define AT91_OSR_1SAMPLES 1
-#define AT91_OSR_4SAMPLES 4
-#define AT91_OSR_16SAMPLES 16
-
#define AT91_SAMA5D2_CHAN_SINGLE(index, num, addr) \
{ \
.type = IIO_VOLTAGE, \
@@ -325,6 +344,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .info_mask_shared_by_all_available = \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.datasheet_name = "CH"#num, \
.indexed = 1, \
}
@@ -346,6 +367,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .info_mask_shared_by_all_available = \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.datasheet_name = "CH"#num"-CH"#num2, \
.indexed = 1, \
}
@@ -365,6 +388,8 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .info_mask_shared_by_all_available = \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.datasheet_name = name, \
}
#define AT91_SAMA5D2_CHAN_PRESSURE(num, name) \
@@ -380,6 +405,23 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ)|\
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .info_mask_shared_by_all_available = \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .datasheet_name = name, \
+ }
+
+#define AT91_SAMA5D2_CHAN_TEMP(num, name, addr) \
+ { \
+ .type = IIO_TEMP, \
+ .channel = num, \
+ .address = addr, \
+ .scan_index = num, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
+ .info_mask_shared_by_all = \
+ BIT(IIO_CHAN_INFO_PROCESSED) | \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .info_mask_shared_by_all_available = \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.datasheet_name = name, \
}
@@ -403,6 +445,12 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
* @max_index: highest channel index (highest index may be higher
* than the total channel number)
* @hw_trig_cnt: number of possible hardware triggers
+ * @osr_mask: oversampling ratio bitmask on EMR register
+ * @oversampling_avail: available oversampling values
+ * @oversampling_avail_no: number of available oversampling values
+ * @chan_realbits: realbits for registered channels
+ * @temp_chan: temperature channel index
+ * @temp_sensor: temperature sensor supported
*/
struct at91_adc_platform {
const struct at91_adc_reg_layout *layout;
@@ -414,20 +462,58 @@ struct at91_adc_platform {
unsigned int max_channels;
unsigned int max_index;
unsigned int hw_trig_cnt;
+ unsigned int osr_mask;
+ unsigned int oversampling_avail[5];
+ unsigned int oversampling_avail_no;
+ unsigned int chan_realbits;
+ unsigned int temp_chan;
+ bool temp_sensor;
+};
+
+/**
+ * struct at91_adc_temp_sensor_clb - at91-sama5d2 temperature sensor
+ * calibration data structure
+ * @p1: P1 calibration temperature
+ * @p4: P4 calibration voltage
+ * @p6: P6 calibration voltage
+ */
+struct at91_adc_temp_sensor_clb {
+ u32 p1;
+ u32 p4;
+ u32 p6;
+};
+
+/**
+ * enum at91_adc_ts_clb_idx - calibration indexes in NVMEM buffer
+ * @AT91_ADC_TS_CLB_IDX_P1: index for P1
+ * @AT91_ADC_TS_CLB_IDX_P4: index for P4
+ * @AT91_ADC_TS_CLB_IDX_P6: index for P6
+ * @AT91_ADC_TS_CLB_IDX_MAX: max index for temperature calibration packet in OTP
+ */
+enum at91_adc_ts_clb_idx {
+ AT91_ADC_TS_CLB_IDX_P1 = 2,
+ AT91_ADC_TS_CLB_IDX_P4 = 5,
+ AT91_ADC_TS_CLB_IDX_P6 = 7,
+ AT91_ADC_TS_CLB_IDX_MAX = 19,
};
+/* Temperature sensor calibration - Vtemp voltage sensitivity to temperature. */
+#define AT91_ADC_TS_VTEMP_DT (2080U)
+
/**
* struct at91_adc_soc_info - at91-sama5d2 soc information struct
* @startup_time: device startup time
* @min_sample_rate: minimum sample rate in Hz
* @max_sample_rate: maximum sample rate in Hz
* @platform: pointer to the platform structure
+ * @temp_sensor_clb: temperature sensor calibration data structure
*/
struct at91_adc_soc_info {
unsigned startup_time;
unsigned min_sample_rate;
unsigned max_sample_rate;
const struct at91_adc_platform *platform;
+ struct at91_adc_temp_sensor_clb temp_sensor_clb;
};
struct at91_adc_trigger {
@@ -475,6 +561,18 @@ struct at91_adc_touch {
struct work_struct workq;
};
+/**
+ * struct at91_adc_temp - at91-sama5d2 temperature information structure
+ * @sample_period_val: sample period value
+ * @saved_sample_rate: saved sample rate
+ * @saved_oversampling: saved oversampling
+ */
+struct at91_adc_temp {
+ u16 sample_period_val;
+ u16 saved_sample_rate;
+ u16 saved_oversampling;
+};
+
/*
* Buffer size requirements:
* No channels * bytes_per_channel(2) + timestamp bytes (8)
@@ -502,7 +600,9 @@ struct at91_adc_state {
wait_queue_head_t wq_data_available;
struct at91_adc_dma dma_st;
struct at91_adc_touch touch_st;
+ struct at91_adc_temp temp_st;
struct iio_dev *indio_dev;
+ struct device *dev;
/* Ensure naturally aligned timestamp */
u16 buffer[AT91_BUFFER_MAX_HWORDS] __aligned(8);
/*
@@ -591,6 +691,7 @@ static const struct iio_chan_spec at91_sama7g5_adc_channels[] = {
AT91_SAMA5D2_CHAN_DIFF(22, 12, 13, 0x90),
AT91_SAMA5D2_CHAN_DIFF(23, 14, 15, 0x98),
IIO_CHAN_SOFT_TIMESTAMP(24),
+ AT91_SAMA5D2_CHAN_TEMP(AT91_SAMA7G5_ADC_TEMP_CHANNEL, "temp", 0xdc),
};
static const struct at91_adc_platform sama5d2_platform = {
@@ -612,6 +713,10 @@ static const struct at91_adc_platform sama5d2_platform = {
.max_index = AT91_SAMA5D2_MAX_CHAN_IDX,
#define AT91_SAMA5D2_HW_TRIG_CNT 3
.hw_trig_cnt = AT91_SAMA5D2_HW_TRIG_CNT,
+ .osr_mask = GENMASK(17, 16),
+ .oversampling_avail = { 1, 4, 16, },
+ .oversampling_avail_no = 3,
+ .chan_realbits = 14,
};
static const struct at91_adc_platform sama7g5_platform = {
@@ -619,14 +724,23 @@ static const struct at91_adc_platform sama7g5_platform = {
.adc_channels = &at91_sama7g5_adc_channels,
#define AT91_SAMA7G5_SINGLE_CHAN_CNT 16
#define AT91_SAMA7G5_DIFF_CHAN_CNT 8
+#define AT91_SAMA7G5_TEMP_CHAN_CNT 1
.nr_channels = AT91_SAMA7G5_SINGLE_CHAN_CNT +
- AT91_SAMA7G5_DIFF_CHAN_CNT,
+ AT91_SAMA7G5_DIFF_CHAN_CNT +
+ AT91_SAMA7G5_TEMP_CHAN_CNT,
#define AT91_SAMA7G5_MAX_CHAN_IDX (AT91_SAMA7G5_SINGLE_CHAN_CNT + \
- AT91_SAMA7G5_DIFF_CHAN_CNT)
+ AT91_SAMA7G5_DIFF_CHAN_CNT + \
+ AT91_SAMA7G5_TEMP_CHAN_CNT)
.max_channels = ARRAY_SIZE(at91_sama7g5_adc_channels),
.max_index = AT91_SAMA7G5_MAX_CHAN_IDX,
#define AT91_SAMA7G5_HW_TRIG_CNT 3
.hw_trig_cnt = AT91_SAMA7G5_HW_TRIG_CNT,
+ .osr_mask = GENMASK(18, 16),
+ .oversampling_avail = { 1, 4, 16, 64, 256, },
+ .oversampling_avail_no = 5,
+ .chan_realbits = 16,
+ .temp_sensor = true,
+ .temp_chan = AT91_SAMA7G5_ADC_TEMP_CHANNEL,
};
static int at91_adc_chan_xlate(struct iio_dev *indio_dev, int chan)
@@ -650,8 +764,8 @@ at91_adc_chan_get(struct iio_dev *indio_dev, int chan)
return indio_dev->channels + index;
}
-static inline int at91_adc_of_xlate(struct iio_dev *indio_dev,
- const struct of_phandle_args *iiospec)
+static inline int at91_adc_fwnode_xlate(struct iio_dev *indio_dev,
+ const struct fwnode_reference_args *iiospec)
{
return at91_adc_chan_xlate(indio_dev, iiospec->args[0]);
}
@@ -725,51 +839,91 @@ static void at91_adc_eoc_ena(struct at91_adc_state *st, unsigned int channel)
at91_adc_writel(st, EOC_IER, BIT(channel));
}
-static void at91_adc_config_emr(struct at91_adc_state *st)
+static int at91_adc_config_emr(struct at91_adc_state *st,
+ u32 oversampling_ratio, u32 trackx)
{
/* configure the extended mode register */
- unsigned int emr = at91_adc_readl(st, EMR);
-
- /* select oversampling per single trigger event */
- emr |= AT91_SAMA5D2_EMR_ASTE(1);
+ unsigned int emr, osr;
+ unsigned int osr_mask = st->soc_info.platform->osr_mask;
+ int i, ret;
- /* delete leftover content if it's the case */
- emr &= ~AT91_SAMA5D2_EMR_OSR_MASK;
+ /* Check against supported oversampling values. */
+ for (i = 0; i < st->soc_info.platform->oversampling_avail_no; i++) {
+ if (oversampling_ratio == st->soc_info.platform->oversampling_avail[i])
+ break;
+ }
+ if (i == st->soc_info.platform->oversampling_avail_no)
+ return -EINVAL;
/* select oversampling ratio from configuration */
- switch (st->oversampling_ratio) {
- case AT91_OSR_1SAMPLES:
- emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES) &
- AT91_SAMA5D2_EMR_OSR_MASK;
+ switch (oversampling_ratio) {
+ case 1:
+ osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_1SAMPLES,
+ osr_mask);
break;
- case AT91_OSR_4SAMPLES:
- emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES) &
- AT91_SAMA5D2_EMR_OSR_MASK;
+ case 4:
+ osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_4SAMPLES,
+ osr_mask);
break;
- case AT91_OSR_16SAMPLES:
- emr |= AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES) &
- AT91_SAMA5D2_EMR_OSR_MASK;
+ case 16:
+ osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_16SAMPLES,
+ osr_mask);
+ break;
+ case 64:
+ osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_64SAMPLES,
+ osr_mask);
+ break;
+ case 256:
+ osr = AT91_SAMA5D2_EMR_OSR(AT91_SAMA5D2_EMR_OSR_256SAMPLES,
+ osr_mask);
break;
}
+ ret = pm_runtime_resume_and_get(st->dev);
+ if (ret < 0)
+ return ret;
+
+ emr = at91_adc_readl(st, EMR);
+ /* select oversampling per single trigger event */
+ emr |= AT91_SAMA5D2_EMR_ASTE(1);
+ /* delete leftover content if it's the case */
+ emr &= ~(osr_mask | AT91_SAMA5D2_TRACKX_MASK);
+ /* Update osr and trackx. */
+ emr |= osr | AT91_SAMA5D2_TRACKX(trackx);
at91_adc_writel(st, EMR, emr);
+
+ pm_runtime_mark_last_busy(st->dev);
+ pm_runtime_put_autosuspend(st->dev);
+
+ st->oversampling_ratio = oversampling_ratio;
+
+ return 0;
}
static int at91_adc_adjust_val_osr(struct at91_adc_state *st, int *val)
{
- if (st->oversampling_ratio == AT91_OSR_1SAMPLES) {
- /*
- * in this case we only have 12 bits of real data, but channel
- * is registered as 14 bits, so shift left two bits
- */
- *val <<= 2;
- } else if (st->oversampling_ratio == AT91_OSR_4SAMPLES) {
- /*
- * in this case we have 13 bits of real data, but channel
- * is registered as 14 bits, so left shift one bit
- */
- *val <<= 1;
- }
+ int nbits, diff;
+
+ if (st->oversampling_ratio == 1)
+ nbits = 12;
+ else if (st->oversampling_ratio == 4)
+ nbits = 13;
+ else if (st->oversampling_ratio == 16)
+ nbits = 14;
+ else if (st->oversampling_ratio == 64)
+ nbits = 15;
+ else if (st->oversampling_ratio == 256)
+ nbits = 16;
+ else
+ /* Should not happen. */
+ return -EINVAL;
+
+ /*
+ * We have nbits of real data and channel is registered as
+ * st->soc_info.platform->chan_realbits, so shift left diff bits.
+ */
+ diff = st->soc_info.platform->chan_realbits - nbits;
+ *val <<= diff;
return IIO_VAL_INT;
}
@@ -799,15 +953,22 @@ static void at91_adc_adjust_val_osr_array(struct at91_adc_state *st, void *buf,
static int at91_adc_configure_touch(struct at91_adc_state *st, bool state)
{
u32 clk_khz = st->current_sample_rate / 1000;
- int i = 0;
+ int i = 0, ret;
u16 pendbc;
u32 tsmr, acr;
- if (!state) {
+ if (state) {
+ ret = pm_runtime_resume_and_get(st->dev);
+ if (ret < 0)
+ return ret;
+ } else {
/* disabling touch IRQs and setting mode to no touch enabled */
at91_adc_writel(st, IDR,
AT91_SAMA5D2_IER_PEN | AT91_SAMA5D2_IER_NOPEN);
at91_adc_writel(st, TSMR, 0);
+
+ pm_runtime_mark_last_busy(st->dev);
+ pm_runtime_put_autosuspend(st->dev);
return 0;
}
/*
@@ -948,10 +1109,9 @@ static int at91_adc_read_pressure(struct at91_adc_state *st, int chan, u16 *val)
return IIO_VAL_INT;
}
-static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
+static void at91_adc_configure_trigger_registers(struct at91_adc_state *st,
+ bool state)
{
- struct iio_dev *indio = iio_trigger_get_drvdata(trig);
- struct at91_adc_state *st = iio_priv(indio);
u32 status = at91_adc_readl(st, TRGR);
/* clear TRGMOD */
@@ -962,6 +1122,26 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
/* set/unset hw trigger */
at91_adc_writel(st, TRGR, status);
+}
+
+static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio = iio_trigger_get_drvdata(trig);
+ struct at91_adc_state *st = iio_priv(indio);
+ int ret;
+
+ if (state) {
+ ret = pm_runtime_resume_and_get(st->dev);
+ if (ret < 0)
+ return ret;
+ }
+
+ at91_adc_configure_trigger_registers(st, state);
+
+ if (!state) {
+ pm_runtime_mark_last_busy(st->dev);
+ pm_runtime_put_autosuspend(st->dev);
+ }
return 0;
}
@@ -1120,11 +1300,15 @@ static int at91_adc_buffer_prepare(struct iio_dev *indio_dev)
if (!(iio_device_get_current_mode(indio_dev) & INDIO_ALL_TRIGGERED_MODES))
return -EINVAL;
+ ret = pm_runtime_resume_and_get(st->dev);
+ if (ret < 0)
+ return ret;
+
/* we continue with the triggered buffer */
ret = at91_adc_dma_start(indio_dev);
if (ret) {
dev_err(&indio_dev->dev, "buffer prepare failed\n");
- return ret;
+ goto pm_runtime_put;
}
for_each_set_bit(bit, indio_dev->active_scan_mask,
@@ -1135,7 +1319,8 @@ static int at91_adc_buffer_prepare(struct iio_dev *indio_dev)
continue;
/* these channel types cannot be handled by this trigger */
if (chan->type == IIO_POSITIONRELATIVE ||
- chan->type == IIO_PRESSURE)
+ chan->type == IIO_PRESSURE ||
+ chan->type == IIO_TEMP)
continue;
at91_adc_cor(st, chan);
@@ -1146,12 +1331,16 @@ static int at91_adc_buffer_prepare(struct iio_dev *indio_dev)
if (at91_adc_buffer_check_use_irq(indio_dev, st))
at91_adc_writel(st, IER, AT91_SAMA5D2_IER_DRDY);
- return 0;
+pm_runtime_put:
+ pm_runtime_mark_last_busy(st->dev);
+ pm_runtime_put_autosuspend(st->dev);
+ return ret;
}
static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev)
{
struct at91_adc_state *st = iio_priv(indio_dev);
+ int ret;
u8 bit;
/* check if we are disabling triggered buffer or the touchscreen */
@@ -1162,6 +1351,10 @@ static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev)
if (!(iio_device_get_current_mode(indio_dev) & INDIO_ALL_TRIGGERED_MODES))
return -EINVAL;
+ ret = pm_runtime_resume_and_get(st->dev);
+ if (ret < 0)
+ return ret;
+
/*
* For each enable channel we must disable it in hardware.
* In the case of DMA, we must read the last converted value
@@ -1177,7 +1370,8 @@ static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev)
continue;
/* these channel types are virtual, no need to do anything */
if (chan->type == IIO_POSITIONRELATIVE ||
- chan->type == IIO_PRESSURE)
+ chan->type == IIO_PRESSURE ||
+ chan->type == IIO_TEMP)
continue;
at91_adc_writel(st, CHDR, BIT(chan->channel));
@@ -1196,6 +1390,9 @@ static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev)
if (st->dma_st.dma_chan)
dmaengine_terminate_sync(st->dma_st.dma_chan);
+ pm_runtime_mark_last_busy(st->dev);
+ pm_runtime_put_autosuspend(st->dev);
+
return 0;
}
@@ -1224,6 +1421,7 @@ static struct iio_trigger *at91_adc_allocate_trigger(struct iio_dev *indio,
return trig;
}
+
static void at91_adc_trigger_handler_nodma(struct iio_dev *indio_dev,
struct iio_poll_func *pf)
{
@@ -1377,25 +1575,35 @@ static unsigned at91_adc_startup_time(unsigned startup_time_min,
return i;
}
-static void at91_adc_setup_samp_freq(struct iio_dev *indio_dev, unsigned freq)
+static void at91_adc_setup_samp_freq(struct iio_dev *indio_dev, unsigned freq,
+ unsigned int startup_time,
+ unsigned int tracktim)
{
struct at91_adc_state *st = iio_priv(indio_dev);
unsigned f_per, prescal, startup, mr;
+ int ret;
f_per = clk_get_rate(st->per_clk);
prescal = (f_per / (2 * freq)) - 1;
- startup = at91_adc_startup_time(st->soc_info.startup_time,
- freq / 1000);
+ startup = at91_adc_startup_time(startup_time, freq / 1000);
+
+ ret = pm_runtime_resume_and_get(st->dev);
+ if (ret < 0)
+ return;
mr = at91_adc_readl(st, MR);
mr &= ~(AT91_SAMA5D2_MR_STARTUP_MASK | AT91_SAMA5D2_MR_PRESCAL_MASK);
mr |= AT91_SAMA5D2_MR_STARTUP(startup);
mr |= AT91_SAMA5D2_MR_PRESCAL(prescal);
+ mr |= AT91_SAMA5D2_MR_TRACKTIM(tracktim);
at91_adc_writel(st, MR, mr);
- dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n",
- freq, startup, prescal);
+ pm_runtime_mark_last_busy(st->dev);
+ pm_runtime_put_autosuspend(st->dev);
+
+ dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u, tracktim=%u\n",
+ freq, startup, prescal, tracktim);
st->current_sample_rate = freq;
}
@@ -1522,6 +1730,7 @@ static irqreturn_t at91_adc_interrupt(int irq, void *private)
return IRQ_HANDLED;
}
+/* This needs to be called with direct mode claimed and st->lock locked. */
static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val)
{
@@ -1529,50 +1738,46 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
u16 tmp_val;
int ret;
+ ret = pm_runtime_resume_and_get(st->dev);
+ if (ret < 0)
+ return ret;
+
/*
* Keep in mind that we cannot use software trigger or touchscreen
* if external trigger is enabled
*/
if (chan->type == IIO_POSITIONRELATIVE) {
- ret = iio_device_claim_direct_mode(indio_dev);
- if (ret)
- return ret;
- mutex_lock(&st->lock);
-
ret = at91_adc_read_position(st, chan->channel,
&tmp_val);
*val = tmp_val;
- mutex_unlock(&st->lock);
- iio_device_release_direct_mode(indio_dev);
+ if (ret > 0)
+ ret = at91_adc_adjust_val_osr(st, val);
- return at91_adc_adjust_val_osr(st, val);
+ goto pm_runtime_put;
}
if (chan->type == IIO_PRESSURE) {
- ret = iio_device_claim_direct_mode(indio_dev);
- if (ret)
- return ret;
- mutex_lock(&st->lock);
-
ret = at91_adc_read_pressure(st, chan->channel,
&tmp_val);
*val = tmp_val;
- mutex_unlock(&st->lock);
- iio_device_release_direct_mode(indio_dev);
+ if (ret > 0)
+ ret = at91_adc_adjust_val_osr(st, val);
- return at91_adc_adjust_val_osr(st, val);
+ goto pm_runtime_put;
}
- /* in this case we have a voltage channel */
-
- ret = iio_device_claim_direct_mode(indio_dev);
- if (ret)
- return ret;
- mutex_lock(&st->lock);
+ /* in this case we have a voltage or temperature channel */
st->chan = chan;
at91_adc_cor(st, chan);
at91_adc_writel(st, CHER, BIT(chan->channel));
+ /*
+ * TEMPMR.TEMPON needs to update after CHER otherwise if none
+ * of the channels are enabled and TEMPMR.TEMPON = 1 will
+ * trigger DRDY interruption while preparing for temperature read.
+ */
+ if (chan->type == IIO_TEMP)
+ at91_adc_writel(st, TEMPMR, AT91_SAMA5D2_TEMPMR_TEMPON);
at91_adc_eoc_ena(st, chan->channel);
at91_adc_writel(st, CR, AT91_SAMA5D2_CR_START);
@@ -1592,14 +1797,125 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
}
at91_adc_eoc_dis(st, st->chan->channel);
+ if (chan->type == IIO_TEMP)
+ at91_adc_writel(st, TEMPMR, 0U);
at91_adc_writel(st, CHDR, BIT(chan->channel));
/* Needed to ACK the DRDY interruption */
at91_adc_readl(st, LCDR);
+pm_runtime_put:
+ pm_runtime_mark_last_busy(st->dev);
+ pm_runtime_put_autosuspend(st->dev);
+ return ret;
+}
+
+static int at91_adc_read_info_locked(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val)
+{
+ struct at91_adc_state *st = iio_priv(indio_dev);
+ int ret;
+
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ mutex_lock(&st->lock);
+ ret = at91_adc_read_info_raw(indio_dev, chan, val);
mutex_unlock(&st->lock);
iio_device_release_direct_mode(indio_dev);
+
+ return ret;
+}
+
+static void at91_adc_temp_sensor_configure(struct at91_adc_state *st,
+ bool start)
+{
+ u32 sample_rate, oversampling_ratio;
+ u32 startup_time, tracktim, trackx;
+
+ if (start) {
+ /*
+ * Configure the sensor for best accuracy: 10MHz frequency,
+ * oversampling rate of 256, tracktim=0xf and trackx=1.
+ */
+ sample_rate = 10 * MEGA;
+ oversampling_ratio = 256;
+ startup_time = AT91_SAMA5D2_MR_STARTUP_TS_MIN;
+ tracktim = AT91_SAMA5D2_MR_TRACKTIM_TS;
+ trackx = AT91_SAMA5D2_TRACKX_TS;
+
+ st->temp_st.saved_sample_rate = st->current_sample_rate;
+ st->temp_st.saved_oversampling = st->oversampling_ratio;
+ } else {
+ /* Go back to previous settings. */
+ sample_rate = st->temp_st.saved_sample_rate;
+ oversampling_ratio = st->temp_st.saved_oversampling;
+ startup_time = st->soc_info.startup_time;
+ tracktim = 0;
+ trackx = 0;
+ }
+
+ at91_adc_setup_samp_freq(st->indio_dev, sample_rate, startup_time,
+ tracktim);
+ at91_adc_config_emr(st, oversampling_ratio, trackx);
+}
+
+static int at91_adc_read_temp(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val)
+{
+ struct at91_adc_state *st = iio_priv(indio_dev);
+ struct at91_adc_temp_sensor_clb *clb = &st->soc_info.temp_sensor_clb;
+ u64 div1, div2;
+ u32 tmp;
+ int ret, vbg, vtemp;
+
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+ mutex_lock(&st->lock);
+
+ ret = pm_runtime_resume_and_get(st->dev);
+ if (ret < 0)
+ goto unlock;
+
+ at91_adc_temp_sensor_configure(st, true);
+
+ /* Read VBG. */
+ tmp = at91_adc_readl(st, ACR);
+ tmp |= AT91_SAMA5D2_ACR_SRCLCH;
+ at91_adc_writel(st, ACR, tmp);
+ ret = at91_adc_read_info_raw(indio_dev, chan, &vbg);
+ if (ret < 0)
+ goto restore_config;
+
+ /* Read VTEMP. */
+ tmp &= ~AT91_SAMA5D2_ACR_SRCLCH;
+ at91_adc_writel(st, ACR, tmp);
+ ret = at91_adc_read_info_raw(indio_dev, chan, &vtemp);
+
+restore_config:
+ /* Revert previous settings. */
+ at91_adc_temp_sensor_configure(st, false);
+ pm_runtime_mark_last_busy(st->dev);
+ pm_runtime_put_autosuspend(st->dev);
+unlock:
+ mutex_unlock(&st->lock);
+ iio_device_release_direct_mode(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Temp[milli] = p1[milli] + (vtemp * clb->p6 - clb->p4 * vbg)/
+ * (vbg * AT91_ADC_TS_VTEMP_DT)
+ */
+ div1 = DIV_ROUND_CLOSEST_ULL(((u64)vtemp * clb->p6), vbg);
+ div1 = DIV_ROUND_CLOSEST_ULL((div1 * 1000), AT91_ADC_TS_VTEMP_DT);
+ div2 = DIV_ROUND_CLOSEST_ULL((u64)clb->p4, AT91_ADC_TS_VTEMP_DT);
+ div2 *= 1000;
+ *val = clb->p1 + (int)div1 - (int)div2;
+
return ret;
}
@@ -1611,7 +1927,8 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
- return at91_adc_read_info_raw(indio_dev, chan, val);
+ return at91_adc_read_info_locked(indio_dev, chan, val);
+
case IIO_CHAN_INFO_SCALE:
*val = st->vref_uv / 1000;
if (chan->differential)
@@ -1619,6 +1936,11 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev,
*val2 = chan->scan_type.realbits;
return IIO_VAL_FRACTIONAL_LOG2;
+ case IIO_CHAN_INFO_PROCESSED:
+ if (chan->type != IIO_TEMP)
+ return -EINVAL;
+ return at91_adc_read_temp(indio_dev, chan, val);
+
case IIO_CHAN_INFO_SAMP_FREQ:
*val = at91_adc_get_sample_freq(st);
return IIO_VAL_INT;
@@ -1637,31 +1959,60 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev,
int val, int val2, long mask)
{
struct at91_adc_state *st = iio_priv(indio_dev);
+ int ret;
switch (mask) {
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
- if ((val != AT91_OSR_1SAMPLES) && (val != AT91_OSR_4SAMPLES) &&
- (val != AT91_OSR_16SAMPLES))
- return -EINVAL;
/* if no change, optimize out */
if (val == st->oversampling_ratio)
return 0;
- st->oversampling_ratio = val;
+
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+ mutex_lock(&st->lock);
/* update ratio */
- at91_adc_config_emr(st);
- return 0;
+ ret = at91_adc_config_emr(st, val, 0);
+ mutex_unlock(&st->lock);
+ iio_device_release_direct_mode(indio_dev);
+ return ret;
case IIO_CHAN_INFO_SAMP_FREQ:
if (val < st->soc_info.min_sample_rate ||
val > st->soc_info.max_sample_rate)
return -EINVAL;
- at91_adc_setup_samp_freq(indio_dev, val);
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+ mutex_lock(&st->lock);
+ at91_adc_setup_samp_freq(indio_dev, val,
+ st->soc_info.startup_time, 0);
+ mutex_unlock(&st->lock);
+ iio_device_release_direct_mode(indio_dev);
return 0;
default:
return -EINVAL;
}
}
+static int at91_adc_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ struct at91_adc_state *st = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *vals = (int *)st->soc_info.platform->oversampling_avail;
+ *type = IIO_VAL_INT;
+ *length = st->soc_info.platform->oversampling_avail_no;
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
static void at91_adc_dma_init(struct at91_adc_state *st)
{
struct device *dev = &st->indio_dev->dev;
@@ -1817,10 +2168,11 @@ static void at91_adc_hw_init(struct iio_dev *indio_dev)
at91_adc_writel(st, MR,
AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
- at91_adc_setup_samp_freq(indio_dev, st->soc_info.min_sample_rate);
+ at91_adc_setup_samp_freq(indio_dev, st->soc_info.min_sample_rate,
+ st->soc_info.startup_time, 0);
/* configure extended mode register */
- at91_adc_config_emr(st);
+ at91_adc_config_emr(st, st->oversampling_ratio, 0);
}
static ssize_t at91_adc_get_fifo_state(struct device *dev,
@@ -1849,20 +2201,6 @@ static IIO_DEVICE_ATTR(hwfifo_watermark, 0444,
static IIO_CONST_ATTR(hwfifo_watermark_min, "2");
static IIO_CONST_ATTR(hwfifo_watermark_max, AT91_HWFIFO_MAX_SIZE_STR);
-static IIO_CONST_ATTR(oversampling_ratio_available,
- __stringify(AT91_OSR_1SAMPLES) " "
- __stringify(AT91_OSR_4SAMPLES) " "
- __stringify(AT91_OSR_16SAMPLES));
-
-static struct attribute *at91_adc_attributes[] = {
- &iio_const_attr_oversampling_ratio_available.dev_attr.attr,
- NULL,
-};
-
-static const struct attribute_group at91_adc_attribute_group = {
- .attrs = at91_adc_attributes,
-};
-
static const struct attribute *at91_adc_fifo_attributes[] = {
&iio_const_attr_hwfifo_watermark_min.dev_attr.attr,
&iio_const_attr_hwfifo_watermark_max.dev_attr.attr,
@@ -1872,11 +2210,11 @@ static const struct attribute *at91_adc_fifo_attributes[] = {
};
static const struct iio_info at91_adc_info = {
- .attrs = &at91_adc_attribute_group,
+ .read_avail = &at91_adc_read_avail,
.read_raw = &at91_adc_read_raw,
.write_raw = &at91_adc_write_raw,
.update_scan_mode = &at91_adc_update_scan_mode,
- .of_xlate = &at91_adc_of_xlate,
+ .fwnode_xlate = &at91_adc_fwnode_xlate,
.hwfifo_set_watermark = &at91_adc_set_watermark,
};
@@ -1918,12 +2256,62 @@ static int at91_adc_buffer_and_trigger_init(struct device *dev,
return 0;
}
+static int at91_adc_temp_sensor_init(struct at91_adc_state *st,
+ struct device *dev)
+{
+ struct at91_adc_temp_sensor_clb *clb = &st->soc_info.temp_sensor_clb;
+ struct nvmem_cell *temp_calib;
+ u32 *buf;
+ size_t len;
+ int ret = 0;
+
+ if (!st->soc_info.platform->temp_sensor)
+ return 0;
+
+ /* Get the calibration data from NVMEM. */
+ temp_calib = devm_nvmem_cell_get(dev, "temperature_calib");
+ if (IS_ERR(temp_calib)) {
+ ret = PTR_ERR(temp_calib);
+ if (ret != -ENOENT)
+ dev_err(dev, "Failed to get temperature_calib cell!\n");
+ return ret;
+ }
+
+ buf = nvmem_cell_read(temp_calib, &len);
+ if (IS_ERR(buf)) {
+ dev_err(dev, "Failed to read calibration data!\n");
+ return PTR_ERR(buf);
+ }
+ if (len < AT91_ADC_TS_CLB_IDX_MAX * 4) {
+ dev_err(dev, "Invalid calibration data!\n");
+ ret = -EINVAL;
+ goto free_buf;
+ }
+
+ /* Store calibration data for later use. */
+ clb->p1 = buf[AT91_ADC_TS_CLB_IDX_P1];
+ clb->p4 = buf[AT91_ADC_TS_CLB_IDX_P4];
+ clb->p6 = buf[AT91_ADC_TS_CLB_IDX_P6];
+
+ /*
+ * We prepare here the conversion to milli and also add constant
+ * factor (5 degrees Celsius) to p1 here to avoid doing it on
+ * hotpath.
+ */
+ clb->p1 = clb->p1 * 1000 + 5000;
+
+free_buf:
+ kfree(buf);
+ return ret;
+}
+
static int at91_adc_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
struct iio_dev *indio_dev;
struct at91_adc_state *st;
struct resource *res;
- int ret, i;
+ int ret, i, num_channels;
u32 edge_type = IRQ_TYPE_NONE;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
@@ -1933,13 +2321,20 @@ static int at91_adc_probe(struct platform_device *pdev)
st = iio_priv(indio_dev);
st->indio_dev = indio_dev;
- st->soc_info.platform = of_device_get_match_data(&pdev->dev);
+ st->soc_info.platform = device_get_match_data(dev);
+
+ ret = at91_adc_temp_sensor_init(st, &pdev->dev);
+ /* Don't register temperature channel if initialization failed. */
+ if (ret)
+ num_channels = st->soc_info.platform->max_channels - 1;
+ else
+ num_channels = st->soc_info.platform->max_channels;
indio_dev->name = dev_name(&pdev->dev);
indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
indio_dev->info = &at91_adc_info;
indio_dev->channels = *st->soc_info.platform->adc_channels;
- indio_dev->num_channels = st->soc_info.platform->max_channels;
+ indio_dev->num_channels = num_channels;
bitmap_set(&st->touch_st.channels_bitmask,
st->soc_info.platform->touch_chan_x, 1);
@@ -1948,36 +2343,34 @@ static int at91_adc_probe(struct platform_device *pdev)
bitmap_set(&st->touch_st.channels_bitmask,
st->soc_info.platform->touch_chan_p, 1);
- st->oversampling_ratio = AT91_OSR_1SAMPLES;
+ st->oversampling_ratio = 1;
- ret = of_property_read_u32(pdev->dev.of_node,
- "atmel,min-sample-rate-hz",
- &st->soc_info.min_sample_rate);
+ ret = device_property_read_u32(dev, "atmel,min-sample-rate-hz",
+ &st->soc_info.min_sample_rate);
if (ret) {
dev_err(&pdev->dev,
"invalid or missing value for atmel,min-sample-rate-hz\n");
return ret;
}
- ret = of_property_read_u32(pdev->dev.of_node,
- "atmel,max-sample-rate-hz",
- &st->soc_info.max_sample_rate);
+ ret = device_property_read_u32(dev, "atmel,max-sample-rate-hz",
+ &st->soc_info.max_sample_rate);
if (ret) {
dev_err(&pdev->dev,
"invalid or missing value for atmel,max-sample-rate-hz\n");
return ret;
}
- ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms",
- &st->soc_info.startup_time);
+ ret = device_property_read_u32(dev, "atmel,startup-time-ms",
+ &st->soc_info.startup_time);
if (ret) {
dev_err(&pdev->dev,
"invalid or missing value for atmel,startup-time-ms\n");
return ret;
}
- ret = of_property_read_u32(pdev->dev.of_node,
- "atmel,trigger-edge-type", &edge_type);
+ ret = device_property_read_u32(dev, "atmel,trigger-edge-type",
+ &edge_type);
if (ret) {
dev_dbg(&pdev->dev,
"atmel,trigger-edge-type not specified, only software trigger available\n");
@@ -2051,13 +2444,19 @@ static int at91_adc_probe(struct platform_device *pdev)
if (ret)
goto vref_disable;
- at91_adc_hw_init(indio_dev);
-
platform_set_drvdata(pdev, indio_dev);
+ st->dev = &pdev->dev;
+ pm_runtime_set_autosuspend_delay(st->dev, 500);
+ pm_runtime_use_autosuspend(st->dev);
+ pm_runtime_set_active(st->dev);
+ pm_runtime_enable(st->dev);
+ pm_runtime_get_noresume(st->dev);
+
+ at91_adc_hw_init(indio_dev);
ret = at91_adc_buffer_and_trigger_init(&pdev->dev, indio_dev);
if (ret < 0)
- goto per_clk_disable_unprepare;
+ goto err_pm_disable;
if (dma_coerce_mask_and_coherent(&indio_dev->dev, DMA_BIT_MASK(32)))
dev_info(&pdev->dev, "cannot set DMA mask to 32-bit\n");
@@ -2073,11 +2472,18 @@ static int at91_adc_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "version: %x\n",
readl_relaxed(st->base + st->soc_info.platform->layout->VERSION));
+ pm_runtime_mark_last_busy(st->dev);
+ pm_runtime_put_autosuspend(st->dev);
+
return 0;
dma_disable:
at91_adc_dma_disable(st);
-per_clk_disable_unprepare:
+err_pm_disable:
+ pm_runtime_put_noidle(st->dev);
+ pm_runtime_disable(st->dev);
+ pm_runtime_set_suspended(st->dev);
+ pm_runtime_dont_use_autosuspend(st->dev);
clk_disable_unprepare(st->per_clk);
vref_disable:
regulator_disable(st->vref);
@@ -2095,6 +2501,8 @@ static int at91_adc_remove(struct platform_device *pdev)
at91_adc_dma_disable(st);
+ pm_runtime_disable(st->dev);
+ pm_runtime_set_suspended(st->dev);
clk_disable_unprepare(st->per_clk);
regulator_disable(st->vref);
@@ -2107,6 +2515,14 @@ static int at91_adc_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct at91_adc_state *st = iio_priv(indio_dev);
+ int ret;
+
+ ret = pm_runtime_resume_and_get(st->dev);
+ if (ret < 0)
+ return ret;
+
+ if (iio_buffer_enabled(indio_dev))
+ at91_adc_buffer_postdisable(indio_dev);
/*
* Do a sofware reset of the ADC before we go to suspend.
@@ -2116,6 +2532,8 @@ static int at91_adc_suspend(struct device *dev)
*/
at91_adc_writel(st, CR, AT91_SAMA5D2_CR_SWRST);
+ pm_runtime_mark_last_busy(st->dev);
+ pm_runtime_put_noidle(st->dev);
clk_disable_unprepare(st->per_clk);
regulator_disable(st->vref);
regulator_disable(st->reg);
@@ -2145,21 +2563,28 @@ static int at91_adc_resume(struct device *dev)
if (ret)
goto vref_disable_resume;
+ pm_runtime_get_noresume(st->dev);
+
at91_adc_hw_init(indio_dev);
/* reconfiguring trigger hardware state */
- if (!iio_buffer_enabled(indio_dev))
- return 0;
+ if (iio_buffer_enabled(indio_dev)) {
+ ret = at91_adc_buffer_prepare(indio_dev);
+ if (ret)
+ goto pm_runtime_put;
- /* check if we are enabling triggered buffer or the touchscreen */
- if (at91_adc_current_chan_is_touch(indio_dev))
- return at91_adc_configure_touch(st, true);
- else
- return at91_adc_configure_trigger(st->trig, true);
+ at91_adc_configure_trigger_registers(st, true);
+ }
+
+ pm_runtime_mark_last_busy(st->dev);
+ pm_runtime_put_autosuspend(st->dev);
- /* not needed but more explicit */
return 0;
+pm_runtime_put:
+ pm_runtime_mark_last_busy(st->dev);
+ pm_runtime_put_noidle(st->dev);
+ clk_disable_unprepare(st->per_clk);
vref_disable_resume:
regulator_disable(st->vref);
reg_disable_resume:
@@ -2169,8 +2594,29 @@ resume_failed:
return ret;
}
-static DEFINE_SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend,
- at91_adc_resume);
+static int at91_adc_runtime_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct at91_adc_state *st = iio_priv(indio_dev);
+
+ clk_disable(st->per_clk);
+
+ return 0;
+}
+
+static int at91_adc_runtime_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct at91_adc_state *st = iio_priv(indio_dev);
+
+ return clk_enable(st->per_clk);
+}
+
+static const struct dev_pm_ops at91_adc_pm_ops = {
+ SYSTEM_SLEEP_PM_OPS(at91_adc_suspend, at91_adc_resume)
+ RUNTIME_PM_OPS(at91_adc_runtime_suspend, at91_adc_runtime_resume,
+ NULL)
+};
static const struct of_device_id at91_adc_dt_match[] = {
{
@@ -2191,7 +2637,7 @@ static struct platform_driver at91_adc_driver = {
.driver = {
.name = "at91-sama5d2_adc",
.of_match_table = at91_adc_dt_match,
- .pm = pm_sleep_ptr(&at91_adc_pm_ops),
+ .pm = pm_ptr(&at91_adc_pm_ops),
},
};
module_platform_driver(at91_adc_driver)
diff --git a/drivers/iio/adc/imx8qxp-adc.c b/drivers/iio/adc/imx8qxp-adc.c
index e48446784a0a..36777b827165 100644
--- a/drivers/iio/adc/imx8qxp-adc.c
+++ b/drivers/iio/adc/imx8qxp-adc.c
@@ -202,7 +202,7 @@ static int imx8qxp_adc_read_raw(struct iio_dev *indio_dev,
struct imx8qxp_adc *adc = iio_priv(indio_dev);
struct device *dev = adc->dev;
- u32 ctrl, vref_uv;
+ u32 ctrl;
long ret;
switch (mask) {
@@ -245,8 +245,10 @@ static int imx8qxp_adc_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
- vref_uv = regulator_get_voltage(adc->vref);
- *val = vref_uv / 1000;
+ ret = regulator_get_voltage(adc->vref);
+ if (ret < 0)
+ return ret;
+ *val = ret / 1000;
*val2 = 12;
return IIO_VAL_FRACTIONAL_LOG2;
diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index bf5c03c34f84..a7325dbbb99a 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -719,12 +719,12 @@ static int ingenic_adc_read_raw(struct iio_dev *iio_dev,
}
}
-static int ingenic_adc_of_xlate(struct iio_dev *iio_dev,
- const struct of_phandle_args *iiospec)
+static int ingenic_adc_fwnode_xlate(struct iio_dev *iio_dev,
+ const struct fwnode_reference_args *iiospec)
{
int i;
- if (!iiospec->args_count)
+ if (!iiospec->nargs)
return -EINVAL;
for (i = 0; i < iio_dev->num_channels; ++i)
@@ -734,16 +734,11 @@ static int ingenic_adc_of_xlate(struct iio_dev *iio_dev,
return -EINVAL;
}
-static void ingenic_adc_clk_cleanup(void *data)
-{
- clk_unprepare(data);
-}
-
static const struct iio_info ingenic_adc_info = {
.write_raw = ingenic_adc_write_raw,
.read_raw = ingenic_adc_read_raw,
.read_avail = ingenic_adc_read_avail,
- .of_xlate = ingenic_adc_of_xlate,
+ .fwnode_xlate = ingenic_adc_fwnode_xlate,
};
static int ingenic_adc_buffer_enable(struct iio_dev *iio_dev)
@@ -858,13 +853,13 @@ static int ingenic_adc_probe(struct platform_device *pdev)
if (IS_ERR(adc->base))
return PTR_ERR(adc->base);
- adc->clk = devm_clk_get(dev, "adc");
+ adc->clk = devm_clk_get_prepared(dev, "adc");
if (IS_ERR(adc->clk)) {
dev_err(dev, "Unable to get clock\n");
return PTR_ERR(adc->clk);
}
- ret = clk_prepare_enable(adc->clk);
+ ret = clk_enable(adc->clk);
if (ret) {
dev_err(dev, "Failed to enable clock\n");
return ret;
@@ -893,12 +888,6 @@ static int ingenic_adc_probe(struct platform_device *pdev)
usleep_range(2000, 3000); /* Must wait at least 2ms. */
clk_disable(adc->clk);
- ret = devm_add_action_or_reset(dev, ingenic_adc_clk_cleanup, adc->clk);
- if (ret) {
- dev_err(dev, "Unable to add action\n");
- return ret;
- }
-
iio_dev->name = "jz-adc";
iio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
iio_dev->setup_ops = &ingenic_buffer_setup_ops;
diff --git a/drivers/iio/adc/lpc18xx_adc.c b/drivers/iio/adc/lpc18xx_adc.c
index 42e6cd6fa6f7..450a243d1f7c 100644
--- a/drivers/iio/adc/lpc18xx_adc.c
+++ b/drivers/iio/adc/lpc18xx_adc.c
@@ -121,11 +121,6 @@ static void lpc18xx_clear_cr_reg(void *data)
writel(0, adc->base + LPC18XX_ADC_CR);
}
-static void lpc18xx_clk_disable(void *clk)
-{
- clk_disable_unprepare(clk);
-}
-
static void lpc18xx_regulator_disable(void *vref)
{
regulator_disable(vref);
@@ -151,7 +146,7 @@ static int lpc18xx_adc_probe(struct platform_device *pdev)
if (IS_ERR(adc->base))
return PTR_ERR(adc->base);
- adc->clk = devm_clk_get(&pdev->dev, NULL);
+ adc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(adc->clk))
return dev_err_probe(&pdev->dev, PTR_ERR(adc->clk),
"error getting clock\n");
@@ -177,17 +172,6 @@ static int lpc18xx_adc_probe(struct platform_device *pdev)
if (ret)
return ret;
- ret = clk_prepare_enable(adc->clk);
- if (ret) {
- dev_err(&pdev->dev, "unable to enable clock\n");
- return ret;
- }
-
- ret = devm_add_action_or_reset(&pdev->dev, lpc18xx_clk_disable,
- adc->clk);
- if (ret)
- return ret;
-
rate = clk_get_rate(adc->clk);
clkdiv = DIV_ROUND_UP(rate, LPC18XX_ADC_CLK_TARGET);
diff --git a/drivers/iio/adc/ltc2496.c b/drivers/iio/adc/ltc2496.c
index dfb3bb5997e5..2593fa4322eb 100644
--- a/drivers/iio/adc/ltc2496.c
+++ b/drivers/iio/adc/ltc2496.c
@@ -15,6 +15,7 @@
#include <linux/iio/driver.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
+#include <linux/property.h>
#include "ltc2497.h"
@@ -74,6 +75,7 @@ static int ltc2496_probe(struct spi_device *spi)
spi_set_drvdata(spi, indio_dev);
st->spi = spi;
st->common_ddata.result_and_measure = ltc2496_result_and_measure;
+ st->common_ddata.chip_info = device_get_match_data(dev);
return ltc2497core_probe(dev, indio_dev);
}
@@ -85,8 +87,13 @@ static void ltc2496_remove(struct spi_device *spi)
ltc2497core_remove(indio_dev);
}
+static const struct ltc2497_chip_info ltc2496_info = {
+ .resolution = 16,
+ .name = NULL,
+};
+
static const struct of_device_id ltc2496_of_match[] = {
- { .compatible = "lltc,ltc2496", },
+ { .compatible = "lltc,ltc2496", .data = &ltc2496_info, },
{},
};
MODULE_DEVICE_TABLE(of, ltc2496_of_match);
diff --git a/drivers/iio/adc/ltc2497-core.c b/drivers/iio/adc/ltc2497-core.c
index 2a485c8a1940..f52d37af4d1f 100644
--- a/drivers/iio/adc/ltc2497-core.c
+++ b/drivers/iio/adc/ltc2497-core.c
@@ -95,7 +95,7 @@ static int ltc2497core_read_raw(struct iio_dev *indio_dev,
return ret;
*val = ret / 1000;
- *val2 = 17;
+ *val2 = ddata->chip_info->resolution + 1;
return IIO_VAL_FRACTIONAL_LOG2;
@@ -169,7 +169,15 @@ int ltc2497core_probe(struct device *dev, struct iio_dev *indio_dev)
struct ltc2497core_driverdata *ddata = iio_priv(indio_dev);
int ret;
- indio_dev->name = dev_name(dev);
+ /*
+ * Keep using dev_name() for the iio_dev's name on some of the parts,
+ * since updating it would result in a ABI breakage.
+ */
+ if (ddata->chip_info->name)
+ indio_dev->name = ddata->chip_info->name;
+ else
+ indio_dev->name = dev_name(dev);
+
indio_dev->info = &ltc2497core_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = ltc2497core_channel;
diff --git a/drivers/iio/adc/ltc2497.c b/drivers/iio/adc/ltc2497.c
index d58a432bafe1..556f10dfb502 100644
--- a/drivers/iio/adc/ltc2497.c
+++ b/drivers/iio/adc/ltc2497.c
@@ -12,18 +12,31 @@
#include <linux/iio/driver.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
+#include <linux/property.h>
+
+#include <asm/unaligned.h>
#include "ltc2497.h"
+enum ltc2497_chip_type {
+ TYPE_LTC2497,
+ TYPE_LTC2499,
+};
+
struct ltc2497_driverdata {
/* this must be the first member */
struct ltc2497core_driverdata common_ddata;
struct i2c_client *client;
+ u32 recv_size;
+ u32 sub_lsb;
/*
* DMA (thus cache coherency maintenance) may require the
* transfer buffers to live in their own cache lines.
*/
- __be32 buf __aligned(IIO_DMA_MINALIGN);
+ union {
+ __be32 d32;
+ u8 d8[3];
+ } data __aligned(IIO_DMA_MINALIGN);
};
static int ltc2497_result_and_measure(struct ltc2497core_driverdata *ddata,
@@ -34,13 +47,43 @@ static int ltc2497_result_and_measure(struct ltc2497core_driverdata *ddata,
int ret;
if (val) {
- ret = i2c_master_recv(st->client, (char *)&st->buf, 3);
+ if (st->recv_size == 3)
+ ret = i2c_master_recv(st->client, (char *)&st->data.d8,
+ st->recv_size);
+ else
+ ret = i2c_master_recv(st->client, (char *)&st->data.d32,
+ st->recv_size);
if (ret < 0) {
dev_err(&st->client->dev, "i2c_master_recv failed\n");
return ret;
}
- *val = (be32_to_cpu(st->buf) >> 14) - (1 << 17);
+ /*
+ * The data format is 16/24 bit 2s complement, but with an upper sign bit on the
+ * resolution + 1 position, which is set for positive values only. Given this
+ * bit's value, subtracting BIT(resolution + 1) from the ADC's result is
+ * equivalent to a sign extension.
+ */
+ if (st->recv_size == 3) {
+ *val = (get_unaligned_be24(st->data.d8) >> st->sub_lsb)
+ - BIT(ddata->chip_info->resolution + 1);
+ } else {
+ *val = (be32_to_cpu(st->data.d32) >> st->sub_lsb)
+ - BIT(ddata->chip_info->resolution + 1);
+ }
+
+ /*
+ * The part started a new conversion at the end of the above i2c
+ * transfer, so if the address didn't change since the last call
+ * everything is fine and we can return early.
+ * If not (which should only happen when some sort of bulk
+ * conversion is implemented) we have to program the new
+ * address. Note that this probably fails as the conversion that
+ * was triggered above is like not complete yet and the two
+ * operations have to be done in a single transfer.
+ */
+ if (ddata->addr_prev == address)
+ return 0;
}
ret = i2c_smbus_write_byte(st->client,
@@ -54,9 +97,11 @@ static int ltc2497_result_and_measure(struct ltc2497core_driverdata *ddata,
static int ltc2497_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ const struct ltc2497_chip_info *chip_info;
struct iio_dev *indio_dev;
struct ltc2497_driverdata *st;
struct device *dev = &client->dev;
+ u32 resolution;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
I2C_FUNC_SMBUS_WRITE_BYTE))
@@ -71,6 +116,15 @@ static int ltc2497_probe(struct i2c_client *client,
st->client = client;
st->common_ddata.result_and_measure = ltc2497_result_and_measure;
+ chip_info = device_get_match_data(dev);
+ if (!chip_info)
+ chip_info = (const struct ltc2497_chip_info *)id->driver_data;
+ st->common_ddata.chip_info = chip_info;
+
+ resolution = chip_info->resolution;
+ st->sub_lsb = 31 - (resolution + 1);
+ st->recv_size = BITS_TO_BYTES(resolution) + 1;
+
return ltc2497core_probe(dev, indio_dev);
}
@@ -81,14 +135,27 @@ static void ltc2497_remove(struct i2c_client *client)
ltc2497core_remove(indio_dev);
}
+static const struct ltc2497_chip_info ltc2497_info[] = {
+ [TYPE_LTC2497] = {
+ .resolution = 16,
+ .name = NULL,
+ },
+ [TYPE_LTC2499] = {
+ .resolution = 24,
+ .name = "ltc2499",
+ },
+};
+
static const struct i2c_device_id ltc2497_id[] = {
- { "ltc2497", 0 },
+ { "ltc2497", (kernel_ulong_t)&ltc2497_info[TYPE_LTC2497] },
+ { "ltc2499", (kernel_ulong_t)&ltc2497_info[TYPE_LTC2499] },
{ }
};
MODULE_DEVICE_TABLE(i2c, ltc2497_id);
static const struct of_device_id ltc2497_of_match[] = {
- { .compatible = "lltc,ltc2497", },
+ { .compatible = "lltc,ltc2497", .data = &ltc2497_info[TYPE_LTC2497] },
+ { .compatible = "lltc,ltc2499", .data = &ltc2497_info[TYPE_LTC2499] },
{},
};
MODULE_DEVICE_TABLE(of, ltc2497_of_match);
diff --git a/drivers/iio/adc/ltc2497.h b/drivers/iio/adc/ltc2497.h
index d0b42dd6b8ad..e023de0d88c4 100644
--- a/drivers/iio/adc/ltc2497.h
+++ b/drivers/iio/adc/ltc2497.h
@@ -4,9 +4,15 @@
#define LTC2497_CONFIG_DEFAULT LTC2497_ENABLE
#define LTC2497_CONVERSION_TIME_MS 150ULL
+struct ltc2497_chip_info {
+ u32 resolution;
+ const char *name;
+};
+
struct ltc2497core_driverdata {
struct regulator *ref;
ktime_t time_prev;
+ const struct ltc2497_chip_info *chip_info;
u8 addr_prev;
int (*result_and_measure)(struct ltc2497core_driverdata *ddata,
u8 address, int *val);
diff --git a/drivers/iio/adc/max11205.c b/drivers/iio/adc/max11205.c
new file mode 100644
index 000000000000..65fc32971ba5
--- /dev/null
+++ b/drivers/iio/adc/max11205.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Maxim MAX11205 16-Bit Delta-Sigma ADC
+ *
+ * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-max11205.pdf
+ * Copyright (C) 2022 Analog Devices, Inc.
+ * Author: Ramona Bolboaca <ramona.bolboaca@analog.com>
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/adc/ad_sigma_delta.h>
+
+#define MAX11205_BIT_SCALE 15
+#define MAX11205A_OUT_DATA_RATE 116
+#define MAX11205B_OUT_DATA_RATE 13
+
+enum max11205_chip_type {
+ TYPE_MAX11205A,
+ TYPE_MAX11205B,
+};
+
+struct max11205_chip_info {
+ unsigned int out_data_rate;
+ const char *name;
+};
+
+struct max11205_state {
+ const struct max11205_chip_info *chip_info;
+ struct regulator *vref;
+ struct ad_sigma_delta sd;
+};
+
+static const struct ad_sigma_delta_info max11205_sigma_delta_info = {
+ .has_registers = false,
+};
+
+static int max11205_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct max11205_state *st = iio_priv(indio_dev);
+ int reg_mv;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ return ad_sigma_delta_single_conversion(indio_dev, chan, val);
+ case IIO_CHAN_INFO_SCALE:
+ reg_mv = regulator_get_voltage(st->vref);
+ if (reg_mv < 0)
+ return reg_mv;
+ reg_mv /= 1000;
+ *val = reg_mv;
+ *val2 = MAX11205_BIT_SCALE;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = st->chip_info->out_data_rate;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info max11205_iio_info = {
+ .read_raw = max11205_read_raw,
+ .validate_trigger = ad_sd_validate_trigger,
+};
+
+static const struct iio_chan_spec max11205_channels[] = {
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_BE,
+ },
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ },
+};
+
+static const struct max11205_chip_info max11205_chip_info[] = {
+ [TYPE_MAX11205A] = {
+ .out_data_rate = MAX11205A_OUT_DATA_RATE,
+ .name = "max11205a",
+ },
+ [TYPE_MAX11205B] = {
+ .out_data_rate = MAX11205B_OUT_DATA_RATE,
+ .name = "max11205b",
+ },
+};
+
+static void max11205_reg_disable(void *reg)
+{
+ regulator_disable(reg);
+}
+
+static int max11205_probe(struct spi_device *spi)
+{
+ struct max11205_state *st;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+
+ ad_sd_init(&st->sd, indio_dev, spi, &max11205_sigma_delta_info);
+
+ st->chip_info = device_get_match_data(&spi->dev);
+ if (!st->chip_info)
+ st->chip_info =
+ (const struct max11205_chip_info *)spi_get_device_id(spi)->driver_data;
+
+ indio_dev->name = st->chip_info->name;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = max11205_channels;
+ indio_dev->num_channels = 1;
+ indio_dev->info = &max11205_iio_info;
+
+ st->vref = devm_regulator_get(&spi->dev, "vref");
+ if (IS_ERR(st->vref))
+ return dev_err_probe(&spi->dev, PTR_ERR(st->vref),
+ "Failed to get vref regulator\n");
+
+ ret = regulator_enable(st->vref);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(&spi->dev, max11205_reg_disable, st->vref);
+ if (ret)
+ return ret;
+
+ ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id max11205_spi_ids[] = {
+ { "max11205a", (kernel_ulong_t)&max11205_chip_info[TYPE_MAX11205A] },
+ { "max11205b", (kernel_ulong_t)&max11205_chip_info[TYPE_MAX11205B] },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, max11205_spi_ids);
+
+static const struct of_device_id max11205_dt_ids[] = {
+ {
+ .compatible = "maxim,max11205a",
+ .data = &max11205_chip_info[TYPE_MAX11205A],
+ },
+ {
+ .compatible = "maxim,max11205b",
+ .data = &max11205_chip_info[TYPE_MAX11205B],
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, max11205_dt_ids);
+
+static struct spi_driver max11205_spi_driver = {
+ .driver = {
+ .name = "max11205",
+ .of_match_table = max11205_dt_ids,
+ },
+ .probe = max11205_probe,
+ .id_table = max11205_spi_ids,
+};
+module_spi_driver(max11205_spi_driver);
+
+MODULE_AUTHOR("Ramona Bolboaca <ramona.bolboaca@analog.com>");
+MODULE_DESCRIPTION("MAX11205 ADC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_AD_SIGMA_DELTA);
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index eef55ed4814a..a28cf86cdce8 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -29,7 +29,6 @@
#include <linux/iio/sysfs.h>
#include <linux/iio/events.h>
#include <linux/iio/buffer.h>
-#include <linux/iio/driver.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
@@ -1595,11 +1594,6 @@ static int max1363_probe(struct i2c_client *client,
if (!indio_dev)
return -ENOMEM;
- ret = devm_iio_map_array_register(&client->dev, indio_dev,
- client->dev.platform_data);
- if (ret < 0)
- return ret;
-
st = iio_priv(indio_dev);
mutex_init(&st->lock);
diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
index 890af7dca62d..b35fd2c9c3c0 100644
--- a/drivers/iio/adc/mcp3911.c
+++ b/drivers/iio/adc/mcp3911.c
@@ -5,16 +5,25 @@
* Copyright (C) 2018 Marcus Folkesson <marcus.folkesson@gmail.com>
* Copyright (C) 2018 Kent Gustavsson <kent@minoris.se>
*/
+#include <linux/bitfield.h>
+#include <linux/bits.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
-#include <linux/iio/iio.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/trigger.h>
+
+#include <asm/unaligned.h>
+
#define MCP3911_REG_CHANNEL0 0x00
#define MCP3911_REG_CHANNEL1 0x03
#define MCP3911_REG_MOD 0x06
@@ -22,6 +31,8 @@
#define MCP3911_REG_GAIN 0x09
#define MCP3911_REG_STATUSCOM 0x0a
+#define MCP3911_STATUSCOM_DRHIZ BIT(12)
+#define MCP3911_STATUSCOM_READ GENMASK(7, 6)
#define MCP3911_STATUSCOM_CH1_24WIDTH BIT(4)
#define MCP3911_STATUSCOM_CH0_24WIDTH BIT(3)
#define MCP3911_STATUSCOM_EN_OFFCAL BIT(2)
@@ -30,6 +41,7 @@
#define MCP3911_REG_CONFIG 0x0c
#define MCP3911_CONFIG_CLKEXT BIT(1)
#define MCP3911_CONFIG_VREFEXT BIT(2)
+#define MCP3911_CONFIG_OSR GENMASK(13, 11)
#define MCP3911_REG_OFFCAL_CH0 0x0e
#define MCP3911_REG_GAINCAL_CH0 0x11
@@ -48,12 +60,22 @@
#define MCP3911_NUM_CHANNELS 2
+static const int mcp3911_osr_table[] = { 32, 64, 128, 256, 512, 1024, 2048, 4096 };
+
struct mcp3911 {
struct spi_device *spi;
struct mutex lock;
struct regulator *vref;
struct clk *clki;
u32 dev_addr;
+ struct iio_trigger *trig;
+ struct {
+ u32 channels[MCP3911_NUM_CHANNELS];
+ s64 ts __aligned(8);
+ } scan;
+
+ u8 tx_buf __aligned(IIO_DMA_MINALIGN);
+ u8 rx_buf[MCP3911_NUM_CHANNELS * 3];
};
static int mcp3911_read(struct mcp3911 *adc, u8 reg, u32 *val, u8 len)
@@ -98,6 +120,36 @@ static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask,
return mcp3911_write(adc, reg, val, len);
}
+static int mcp3911_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ return IIO_VAL_INT;
+ default:
+ return IIO_VAL_INT_PLUS_NANO;
+ }
+}
+
+static int mcp3911_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long info)
+{
+ switch (info) {
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *type = IIO_VAL_INT;
+ *vals = mcp3911_osr_table;
+ *length = ARRAY_SIZE(mcp3911_osr_table);
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
static int mcp3911_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *channel, int *val,
int *val2, long mask)
@@ -126,6 +178,15 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev,
ret = IIO_VAL_INT;
break;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2);
+ if (ret)
+ goto out;
+
+ *val = FIELD_GET(MCP3911_CONFIG_OSR, *val);
+ *val = 32 << *val;
+ ret = IIO_VAL_INT;
+ break;
case IIO_CHAN_INFO_SCALE:
if (adc->vref) {
@@ -185,6 +246,17 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
MCP3911_STATUSCOM_EN_OFFCAL,
MCP3911_STATUSCOM_EN_OFFCAL, 2);
break;
+
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ for (int i = 0; i < sizeof(mcp3911_osr_table); i++) {
+ if (val == mcp3911_osr_table[i]) {
+ val = FIELD_PREP(MCP3911_CONFIG_OSR, i);
+ ret = mcp3911_update(adc, MCP3911_REG_CONFIG, MCP3911_CONFIG_OSR,
+ val, 2);
+ break;
+ }
+ }
+ break;
}
out:
@@ -196,25 +268,80 @@ out:
.type = IIO_VOLTAGE, \
.indexed = 1, \
.channel = idx, \
+ .scan_index = idx, \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_OFFSET) | \
BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_type_available = \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 24, \
+ .storagebits = 32, \
+ .endianness = IIO_BE, \
+ }, \
}
static const struct iio_chan_spec mcp3911_channels[] = {
MCP3911_CHAN(0),
MCP3911_CHAN(1),
+ IIO_CHAN_SOFT_TIMESTAMP(2),
};
+static irqreturn_t mcp3911_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct mcp3911 *adc = iio_priv(indio_dev);
+ struct spi_transfer xfer[] = {
+ {
+ .tx_buf = &adc->tx_buf,
+ .len = 1,
+ }, {
+ .rx_buf = adc->rx_buf,
+ .len = sizeof(adc->rx_buf),
+ },
+ };
+ int scan_index;
+ int i = 0;
+ int ret;
+
+ mutex_lock(&adc->lock);
+ adc->tx_buf = MCP3911_REG_READ(MCP3911_CHANNEL(0), adc->dev_addr);
+ ret = spi_sync_transfer(adc->spi, xfer, ARRAY_SIZE(xfer));
+ if (ret < 0) {
+ dev_warn(&adc->spi->dev,
+ "failed to get conversion data\n");
+ goto out;
+ }
+
+ for_each_set_bit(scan_index, indio_dev->active_scan_mask, indio_dev->masklength) {
+ const struct iio_chan_spec *scan_chan = &indio_dev->channels[scan_index];
+
+ adc->scan.channels[i] = get_unaligned_be24(&adc->rx_buf[scan_chan->channel * 3]);
+ i++;
+ }
+ iio_push_to_buffers_with_timestamp(indio_dev, &adc->scan,
+ iio_get_time_ns(indio_dev));
+out:
+ mutex_unlock(&adc->lock);
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
static const struct iio_info mcp3911_info = {
.read_raw = mcp3911_read_raw,
.write_raw = mcp3911_write_raw,
+ .read_avail = mcp3911_read_avail,
+ .write_raw_get_fmt = mcp3911_write_raw_get_fmt,
};
static int mcp3911_config(struct mcp3911 *adc)
{
struct device *dev = &adc->spi->dev;
- u32 configreg;
+ u32 regval;
int ret;
ret = device_property_read_u32(dev, "microchip,device-addr", &adc->dev_addr);
@@ -233,31 +360,67 @@ static int mcp3911_config(struct mcp3911 *adc)
}
dev_dbg(&adc->spi->dev, "use device address %i\n", adc->dev_addr);
- ret = mcp3911_read(adc, MCP3911_REG_CONFIG, &configreg, 2);
+ ret = mcp3911_read(adc, MCP3911_REG_CONFIG, &regval, 2);
if (ret)
return ret;
+ regval &= ~MCP3911_CONFIG_VREFEXT;
if (adc->vref) {
dev_dbg(&adc->spi->dev, "use external voltage reference\n");
- configreg |= MCP3911_CONFIG_VREFEXT;
+ regval |= FIELD_PREP(MCP3911_CONFIG_VREFEXT, 1);
} else {
dev_dbg(&adc->spi->dev,
"use internal voltage reference (1.2V)\n");
- configreg &= ~MCP3911_CONFIG_VREFEXT;
+ regval |= FIELD_PREP(MCP3911_CONFIG_VREFEXT, 0);
}
+ regval &= ~MCP3911_CONFIG_CLKEXT;
if (adc->clki) {
dev_dbg(&adc->spi->dev, "use external clock as clocksource\n");
- configreg |= MCP3911_CONFIG_CLKEXT;
+ regval |= FIELD_PREP(MCP3911_CONFIG_CLKEXT, 1);
} else {
dev_dbg(&adc->spi->dev,
"use crystal oscillator as clocksource\n");
- configreg &= ~MCP3911_CONFIG_CLKEXT;
+ regval |= FIELD_PREP(MCP3911_CONFIG_CLKEXT, 0);
}
- return mcp3911_write(adc, MCP3911_REG_CONFIG, configreg, 2);
+ ret = mcp3911_write(adc, MCP3911_REG_CONFIG, regval, 2);
+ if (ret)
+ return ret;
+
+ ret = mcp3911_read(adc, MCP3911_REG_STATUSCOM, &regval, 2);
+ if (ret)
+ return ret;
+
+ /* Address counter incremented, cycle through register types */
+ regval &= ~MCP3911_STATUSCOM_READ;
+ regval |= FIELD_PREP(MCP3911_STATUSCOM_READ, 0x02);
+
+ return mcp3911_write(adc, MCP3911_REG_STATUSCOM, regval, 2);
}
+static void mcp3911_cleanup_regulator(void *vref)
+{
+ regulator_disable(vref);
+}
+
+static int mcp3911_set_trigger_state(struct iio_trigger *trig, bool enable)
+{
+ struct mcp3911 *adc = iio_trigger_get_drvdata(trig);
+
+ if (enable)
+ enable_irq(adc->spi->irq);
+ else
+ disable_irq(adc->spi->irq);
+
+ return 0;
+}
+
+static const struct iio_trigger_ops mcp3911_trigger_ops = {
+ .validate_device = iio_trigger_validate_own_device,
+ .set_trigger_state = mcp3911_set_trigger_state,
+};
+
static int mcp3911_probe(struct spi_device *spi)
{
struct iio_dev *indio_dev;
@@ -286,9 +449,14 @@ static int mcp3911_probe(struct spi_device *spi)
ret = regulator_enable(adc->vref);
if (ret)
return ret;
+
+ ret = devm_add_action_or_reset(&spi->dev,
+ mcp3911_cleanup_regulator, adc->vref);
+ if (ret)
+ return ret;
}
- adc->clki = devm_clk_get(&adc->spi->dev, NULL);
+ adc->clki = devm_clk_get_enabled(&adc->spi->dev, NULL);
if (IS_ERR(adc->clki)) {
if (PTR_ERR(adc->clki) == -ENOENT) {
adc->clki = NULL;
@@ -296,21 +464,22 @@ static int mcp3911_probe(struct spi_device *spi)
dev_err(&adc->spi->dev,
"failed to get adc clk (%ld)\n",
PTR_ERR(adc->clki));
- ret = PTR_ERR(adc->clki);
- goto reg_disable;
- }
- } else {
- ret = clk_prepare_enable(adc->clki);
- if (ret < 0) {
- dev_err(&adc->spi->dev,
- "Failed to enable clki: %d\n", ret);
- goto reg_disable;
+ return PTR_ERR(adc->clki);
}
}
ret = mcp3911_config(adc);
if (ret)
- goto clk_disable;
+ return ret;
+
+ if (device_property_read_bool(&adc->spi->dev, "microchip,data-ready-hiz"))
+ ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ,
+ 0, 2);
+ else
+ ret = mcp3911_update(adc, MCP3911_REG_STATUSCOM, MCP3911_STATUSCOM_DRHIZ,
+ MCP3911_STATUSCOM_DRHIZ, 2);
+ if (ret)
+ return ret;
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->modes = INDIO_DIRECT_MODE;
@@ -322,31 +491,38 @@ static int mcp3911_probe(struct spi_device *spi)
mutex_init(&adc->lock);
- ret = iio_device_register(indio_dev);
- if (ret)
- goto clk_disable;
-
- return ret;
-
-clk_disable:
- clk_disable_unprepare(adc->clki);
-reg_disable:
- if (adc->vref)
- regulator_disable(adc->vref);
+ if (spi->irq > 0) {
+ adc->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
+ indio_dev->name,
+ iio_device_id(indio_dev));
+ if (!adc->trig)
+ return PTR_ERR(adc->trig);
- return ret;
-}
+ adc->trig->ops = &mcp3911_trigger_ops;
+ iio_trigger_set_drvdata(adc->trig, adc);
+ ret = devm_iio_trigger_register(&spi->dev, adc->trig);
+ if (ret)
+ return ret;
-static void mcp3911_remove(struct spi_device *spi)
-{
- struct iio_dev *indio_dev = spi_get_drvdata(spi);
- struct mcp3911 *adc = iio_priv(indio_dev);
+ /*
+ * The device generates interrupts as long as it is powered up.
+ * Some platforms might not allow the option to power it down so
+ * don't enable the interrupt to avoid extra load on the system.
+ */
+ ret = devm_request_irq(&spi->dev, spi->irq,
+ &iio_trigger_generic_data_rdy_poll, IRQF_NO_AUTOEN | IRQF_ONESHOT,
+ indio_dev->name, adc->trig);
+ if (ret)
+ return ret;
+ }
- iio_device_unregister(indio_dev);
+ ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
+ NULL,
+ mcp3911_trigger_handler, NULL);
+ if (ret)
+ return ret;
- clk_disable_unprepare(adc->clki);
- if (adc->vref)
- regulator_disable(adc->vref);
+ return devm_iio_device_register(&adc->spi->dev, indio_dev);
}
static const struct of_device_id mcp3911_dt_ids[] = {
@@ -367,7 +543,6 @@ static struct spi_driver mcp3911_driver = {
.of_match_table = mcp3911_dt_ids,
},
.probe = mcp3911_probe,
- .remove = mcp3911_remove,
.id_table = mcp3911_id,
};
module_spi_driver(mcp3911_driver);
diff --git a/drivers/iio/adc/mt6360-adc.c b/drivers/iio/adc/mt6360-adc.c
index 35260d9e4e47..3710473e526f 100644
--- a/drivers/iio/adc/mt6360-adc.c
+++ b/drivers/iio/adc/mt6360-adc.c
@@ -353,7 +353,7 @@ static int mt6360_adc_probe(struct platform_device *pdev)
return devm_iio_device_register(&pdev->dev, indio_dev);
}
-static const struct of_device_id __maybe_unused mt6360_adc_of_id[] = {
+static const struct of_device_id mt6360_adc_of_id[] = {
{ .compatible = "mediatek,mt6360-adc", },
{}
};
diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
index 5e9e56821075..eb424496ee1d 100644
--- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c
+++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
@@ -14,9 +14,9 @@
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -694,8 +694,8 @@ static int pm8xxx_read_raw(struct iio_dev *indio_dev,
}
}
-static int pm8xxx_of_xlate(struct iio_dev *indio_dev,
- const struct of_phandle_args *iiospec)
+static int pm8xxx_fwnode_xlate(struct iio_dev *indio_dev,
+ const struct fwnode_reference_args *iiospec)
{
struct pm8xxx_xoadc *adc = iio_priv(indio_dev);
u8 pre_scale_mux;
@@ -706,10 +706,10 @@ static int pm8xxx_of_xlate(struct iio_dev *indio_dev,
* First cell is prescaler or premux, second cell is analog
* mux.
*/
- if (iiospec->args_count != 2) {
- dev_err(&indio_dev->dev, "wrong number of arguments for %pOFn need 2 got %d\n",
- iiospec->np,
- iiospec->args_count);
+ if (iiospec->nargs != 2) {
+ dev_err(&indio_dev->dev, "wrong number of arguments for %pfwP need 2 got %d\n",
+ iiospec->fwnode,
+ iiospec->nargs);
return -EINVAL;
}
pre_scale_mux = (u8)iiospec->args[0];
@@ -727,34 +727,34 @@ static int pm8xxx_of_xlate(struct iio_dev *indio_dev,
}
static const struct iio_info pm8xxx_xoadc_info = {
- .of_xlate = pm8xxx_of_xlate,
+ .fwnode_xlate = pm8xxx_fwnode_xlate,
.read_raw = pm8xxx_read_raw,
};
static int pm8xxx_xoadc_parse_channel(struct device *dev,
- struct device_node *np,
+ struct fwnode_handle *fwnode,
const struct xoadc_channel *hw_channels,
struct iio_chan_spec *iio_chan,
struct pm8xxx_chan_info *ch)
{
- const char *name = np->name;
+ const char *name = fwnode_get_name(fwnode);
const struct xoadc_channel *hwchan;
- u32 pre_scale_mux, amux_channel;
+ u32 pre_scale_mux, amux_channel, reg[2];
u32 rsv, dec;
int ret;
int chid;
- ret = of_property_read_u32_index(np, "reg", 0, &pre_scale_mux);
+ ret = fwnode_property_read_u32_array(fwnode, "reg", reg,
+ ARRAY_SIZE(reg));
if (ret) {
- dev_err(dev, "invalid pre scale/mux number %s\n", name);
- return ret;
- }
- ret = of_property_read_u32_index(np, "reg", 1, &amux_channel);
- if (ret) {
- dev_err(dev, "invalid amux channel number %s\n", name);
+ dev_err(dev, "invalid pre scale/mux or amux channel number %s\n",
+ name);
return ret;
}
+ pre_scale_mux = reg[0];
+ amux_channel = reg[1];
+
/* Find the right channel setting */
chid = 0;
hwchan = &hw_channels[0];
@@ -778,7 +778,7 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev,
/* Everyone seems to use default ("type 2") decimation */
ch->decimation = VADC_DEF_DECIMATION;
- if (!of_property_read_u32(np, "qcom,ratiometric", &rsv)) {
+ if (!fwnode_property_read_u32(fwnode, "qcom,ratiometric", &rsv)) {
ch->calibration = VADC_CALIB_RATIOMETRIC;
if (rsv > XOADC_RSV_MAX) {
dev_err(dev, "%s too large RSV value %d\n", name, rsv);
@@ -791,7 +791,7 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev,
}
/* Optional decimation, if omitted we use the default */
- ret = of_property_read_u32(np, "qcom,decimation", &dec);
+ ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &dec);
if (!ret) {
ret = qcom_vadc_decimation_from_dt(dec);
if (ret < 0) {
@@ -820,15 +820,14 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev,
return 0;
}
-static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc,
- struct device_node *np)
+static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc)
{
- struct device_node *child;
+ struct fwnode_handle *child;
struct pm8xxx_chan_info *ch;
int ret;
int i;
- adc->nchans = of_get_available_child_count(np);
+ adc->nchans = device_get_child_node_count(adc->dev);
if (!adc->nchans) {
dev_err(adc->dev, "no channel children\n");
return -ENODEV;
@@ -846,14 +845,14 @@ static int pm8xxx_xoadc_parse_channels(struct pm8xxx_xoadc *adc,
return -ENOMEM;
i = 0;
- for_each_available_child_of_node(np, child) {
+ device_for_each_child_node(adc->dev, child) {
ch = &adc->chans[i];
ret = pm8xxx_xoadc_parse_channel(adc->dev, child,
adc->variant->channels,
&adc->iio_chans[i],
ch);
if (ret) {
- of_node_put(child);
+ fwnode_handle_put(child);
return ret;
}
i++;
@@ -884,12 +883,11 @@ static int pm8xxx_xoadc_probe(struct platform_device *pdev)
const struct xoadc_variant *variant;
struct pm8xxx_xoadc *adc;
struct iio_dev *indio_dev;
- struct device_node *np = pdev->dev.of_node;
struct regmap *map;
struct device *dev = &pdev->dev;
int ret;
- variant = of_device_get_match_data(dev);
+ variant = device_get_match_data(dev);
if (!variant)
return -ENODEV;
@@ -904,7 +902,7 @@ static int pm8xxx_xoadc_probe(struct platform_device *pdev)
init_completion(&adc->complete);
mutex_init(&adc->lock);
- ret = pm8xxx_xoadc_parse_channels(adc, np);
+ ret = pm8xxx_xoadc_parse_channels(adc);
if (ret)
return ret;
diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index 87438d1e5c0b..821fee60a765 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -14,9 +14,9 @@
#include <linux/log2.h>
#include <linux/math64.h>
#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/slab.h>
@@ -403,8 +403,8 @@ static irqreturn_t adc5_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int adc5_of_xlate(struct iio_dev *indio_dev,
- const struct of_phandle_args *iiospec)
+static int adc5_fwnode_xlate(struct iio_dev *indio_dev,
+ const struct fwnode_reference_args *iiospec)
{
struct adc5_chip *adc = iio_priv(indio_dev);
int i;
@@ -416,8 +416,8 @@ static int adc5_of_xlate(struct iio_dev *indio_dev,
return -EINVAL;
}
-static int adc7_of_xlate(struct iio_dev *indio_dev,
- const struct of_phandle_args *iiospec)
+static int adc7_fwnode_xlate(struct iio_dev *indio_dev,
+ const struct fwnode_reference_args *iiospec)
{
struct adc5_chip *adc = iio_priv(indio_dev);
int i, v_channel;
@@ -481,12 +481,12 @@ static int adc7_read_raw(struct iio_dev *indio_dev,
static const struct iio_info adc5_info = {
.read_raw = adc5_read_raw,
- .of_xlate = adc5_of_xlate,
+ .fwnode_xlate = adc5_fwnode_xlate,
};
static const struct iio_info adc7_info = {
.read_raw = adc7_read_raw,
- .of_xlate = adc7_of_xlate,
+ .fwnode_xlate = adc7_fwnode_xlate,
};
struct adc5_channels {
@@ -526,6 +526,8 @@ static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = {
SCALE_HW_CALIB_DEFAULT)
[ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1,
SCALE_HW_CALIB_DEFAULT)
+ [ADC5_VCOIN] = ADC5_CHAN_VOLT("vcoin", 1,
+ SCALE_HW_CALIB_DEFAULT)
[ADC5_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 0,
SCALE_HW_CALIB_PMIC_THERM)
[ADC5_USB_IN_I] = ADC5_CHAN_VOLT("usb_in_i_uv", 0,
@@ -549,6 +551,12 @@ static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = {
SCALE_HW_CALIB_THERM_100K_PULLUP)
[ADC5_AMUX_THM2] = ADC5_CHAN_TEMP("amux_thm2", 0,
SCALE_HW_CALIB_PM5_SMB_TEMP)
+ [ADC5_GPIO1_100K_PU] = ADC5_CHAN_TEMP("gpio1_100k_pu", 0,
+ SCALE_HW_CALIB_THERM_100K_PULLUP)
+ [ADC5_GPIO3_100K_PU] = ADC5_CHAN_TEMP("gpio3_100k_pu", 0,
+ SCALE_HW_CALIB_THERM_100K_PULLUP)
+ [ADC5_GPIO4_100K_PU] = ADC5_CHAN_TEMP("gpio4_100k_pu", 0,
+ SCALE_HW_CALIB_THERM_100K_PULLUP)
};
static const struct adc5_channels adc7_chans_pmic[ADC5_MAX_CHANNEL] = {
@@ -589,6 +597,8 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
SCALE_HW_CALIB_DEFAULT)
[ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0,
SCALE_HW_CALIB_DEFAULT)
+ [ADC5_VREF_VADC] = ADC5_CHAN_VOLT("vref_vadc", 0,
+ SCALE_HW_CALIB_DEFAULT)
[ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1,
SCALE_HW_CALIB_DEFAULT)
[ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1,
@@ -611,18 +621,18 @@ static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
SCALE_HW_CALIB_THERM_100K_PULLUP)
};
-static int adc5_get_dt_channel_data(struct adc5_chip *adc,
+static int adc5_get_fw_channel_data(struct adc5_chip *adc,
struct adc5_channel_prop *prop,
- struct device_node *node,
+ struct fwnode_handle *fwnode,
const struct adc5_data *data)
{
- const char *name = node->name, *channel_name;
+ const char *name = fwnode_get_name(fwnode), *channel_name;
u32 chan, value, varr[2];
u32 sid = 0;
int ret;
struct device *dev = adc->dev;
- ret = of_property_read_u32(node, "reg", &chan);
+ ret = fwnode_property_read_u32(fwnode, "reg", &chan);
if (ret) {
dev_err(dev, "invalid channel number %s\n", name);
return ret;
@@ -647,15 +657,13 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
prop->channel = chan;
prop->sid = sid;
- channel_name = of_get_property(node,
- "label", NULL) ? : node->name;
- if (!channel_name) {
- dev_err(dev, "Invalid channel name\n");
- return -EINVAL;
- }
+ ret = fwnode_property_read_string(fwnode, "label", &channel_name);
+ if (ret)
+ channel_name = name;
+
prop->datasheet_name = channel_name;
- ret = of_property_read_u32(node, "qcom,decimation", &value);
+ ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &value);
if (!ret) {
ret = qcom_adc5_decimation_from_dt(value, data->decimation);
if (ret < 0) {
@@ -668,7 +676,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
prop->decimation = ADC5_DECIMATION_DEFAULT;
}
- ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2);
+ ret = fwnode_property_read_u32_array(fwnode, "qcom,pre-scaling", varr, 2);
if (!ret) {
ret = qcom_adc5_prescaling_from_dt(varr[0], varr[1]);
if (ret < 0) {
@@ -682,7 +690,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
adc->data->adc_chans[prop->channel].prescale_index;
}
- ret = of_property_read_u32(node, "qcom,hw-settle-time", &value);
+ ret = fwnode_property_read_u32(fwnode, "qcom,hw-settle-time", &value);
if (!ret) {
u8 dig_version[2];
@@ -713,7 +721,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
prop->hw_settle_time = VADC_DEF_HW_SETTLE_TIME;
}
- ret = of_property_read_u32(node, "qcom,avg-samples", &value);
+ ret = fwnode_property_read_u32(fwnode, "qcom,avg-samples", &value);
if (!ret) {
ret = qcom_adc5_avg_samples_from_dt(value);
if (ret < 0) {
@@ -726,7 +734,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
prop->avg_samples = VADC_DEF_AVG_SAMPLES;
}
- if (of_property_read_bool(node, "qcom,ratiometric"))
+ if (fwnode_property_read_bool(fwnode, "qcom,ratiometric"))
prop->cal_method = ADC5_RATIOMETRIC_CAL;
else
prop->cal_method = ADC5_ABSOLUTE_CAL;
@@ -801,16 +809,16 @@ static const struct of_device_id adc5_match_table[] = {
};
MODULE_DEVICE_TABLE(of, adc5_match_table);
-static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node)
+static int adc5_get_fw_data(struct adc5_chip *adc)
{
const struct adc5_channels *adc_chan;
struct iio_chan_spec *iio_chan;
struct adc5_channel_prop prop, *chan_props;
- struct device_node *child;
+ struct fwnode_handle *child;
unsigned int index = 0;
int ret;
- adc->nchannels = of_get_available_child_count(node);
+ adc->nchannels = device_get_child_node_count(adc->dev);
if (!adc->nchannels)
return -EINVAL;
@@ -826,14 +834,14 @@ static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node)
chan_props = adc->chan_props;
iio_chan = adc->iio_chans;
- adc->data = of_device_get_match_data(adc->dev);
+ adc->data = device_get_match_data(adc->dev);
if (!adc->data)
adc->data = &adc5_data_pmic;
- for_each_available_child_of_node(node, child) {
- ret = adc5_get_dt_channel_data(adc, &prop, child, adc->data);
+ device_for_each_child_node(adc->dev, child) {
+ ret = adc5_get_fw_channel_data(adc, &prop, child, adc->data);
if (ret) {
- of_node_put(child);
+ fwnode_handle_put(child);
return ret;
}
@@ -858,7 +866,6 @@ static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node)
static int adc5_probe(struct platform_device *pdev)
{
- struct device_node *node = pdev->dev.of_node;
struct device *dev = &pdev->dev;
struct iio_dev *indio_dev;
struct adc5_chip *adc;
@@ -870,7 +877,7 @@ static int adc5_probe(struct platform_device *pdev)
if (!regmap)
return -ENODEV;
- ret = of_property_read_u32(node, "reg", &reg);
+ ret = device_property_read_u32(dev, "reg", &reg);
if (ret < 0)
return ret;
@@ -886,7 +893,7 @@ static int adc5_probe(struct platform_device *pdev)
init_completion(&adc->complete);
mutex_init(&adc->lock);
- ret = adc5_get_dt_data(adc, node);
+ ret = adc5_get_fw_data(adc);
if (ret) {
dev_err(dev, "adc get dt data failed\n");
return ret;
diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index 34202ba52469..bcff0f62b70e 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -13,8 +13,9 @@
#include <linux/kernel.h>
#include <linux/math64.h>
#include <linux/module.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/log2.h>
@@ -481,8 +482,8 @@ static int vadc_read_raw(struct iio_dev *indio_dev,
return ret;
}
-static int vadc_of_xlate(struct iio_dev *indio_dev,
- const struct of_phandle_args *iiospec)
+static int vadc_fwnode_xlate(struct iio_dev *indio_dev,
+ const struct fwnode_reference_args *iiospec)
{
struct vadc_priv *vadc = iio_priv(indio_dev);
unsigned int i;
@@ -496,7 +497,7 @@ static int vadc_of_xlate(struct iio_dev *indio_dev,
static const struct iio_info vadc_info = {
.read_raw = vadc_read_raw,
- .of_xlate = vadc_of_xlate,
+ .fwnode_xlate = vadc_fwnode_xlate,
};
struct vadc_channels {
@@ -647,15 +648,15 @@ static const struct vadc_channels vadc_chans[] = {
VADC_CHAN_NO_SCALE(LR_MUX3_BUF_PU1_PU2_XO_THERM, 0)
};
-static int vadc_get_dt_channel_data(struct device *dev,
+static int vadc_get_fw_channel_data(struct device *dev,
struct vadc_channel_prop *prop,
- struct device_node *node)
+ struct fwnode_handle *fwnode)
{
- const char *name = node->name;
+ const char *name = fwnode_get_name(fwnode);
u32 chan, value, varr[2];
int ret;
- ret = of_property_read_u32(node, "reg", &chan);
+ ret = fwnode_property_read_u32(fwnode, "reg", &chan);
if (ret) {
dev_err(dev, "invalid channel number %s\n", name);
return ret;
@@ -669,7 +670,7 @@ static int vadc_get_dt_channel_data(struct device *dev,
/* the channel has DT description */
prop->channel = chan;
- ret = of_property_read_u32(node, "qcom,decimation", &value);
+ ret = fwnode_property_read_u32(fwnode, "qcom,decimation", &value);
if (!ret) {
ret = qcom_vadc_decimation_from_dt(value);
if (ret < 0) {
@@ -682,7 +683,7 @@ static int vadc_get_dt_channel_data(struct device *dev,
prop->decimation = VADC_DEF_DECIMATION;
}
- ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2);
+ ret = fwnode_property_read_u32_array(fwnode, "qcom,pre-scaling", varr, 2);
if (!ret) {
ret = vadc_prescaling_from_dt(varr[0], varr[1]);
if (ret < 0) {
@@ -695,7 +696,7 @@ static int vadc_get_dt_channel_data(struct device *dev,
prop->prescale = vadc_chans[prop->channel].prescale_index;
}
- ret = of_property_read_u32(node, "qcom,hw-settle-time", &value);
+ ret = fwnode_property_read_u32(fwnode, "qcom,hw-settle-time", &value);
if (!ret) {
ret = vadc_hw_settle_time_from_dt(value);
if (ret < 0) {
@@ -708,7 +709,7 @@ static int vadc_get_dt_channel_data(struct device *dev,
prop->hw_settle_time = VADC_DEF_HW_SETTLE_TIME;
}
- ret = of_property_read_u32(node, "qcom,avg-samples", &value);
+ ret = fwnode_property_read_u32(fwnode, "qcom,avg-samples", &value);
if (!ret) {
ret = vadc_avg_samples_from_dt(value);
if (ret < 0) {
@@ -721,7 +722,7 @@ static int vadc_get_dt_channel_data(struct device *dev,
prop->avg_samples = VADC_DEF_AVG_SAMPLES;
}
- if (of_property_read_bool(node, "qcom,ratiometric"))
+ if (fwnode_property_read_bool(fwnode, "qcom,ratiometric"))
prop->calibration = VADC_CALIB_RATIOMETRIC;
else
prop->calibration = VADC_CALIB_ABSOLUTE;
@@ -731,16 +732,16 @@ static int vadc_get_dt_channel_data(struct device *dev,
return 0;
}
-static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node)
+static int vadc_get_fw_data(struct vadc_priv *vadc)
{
const struct vadc_channels *vadc_chan;
struct iio_chan_spec *iio_chan;
struct vadc_channel_prop prop;
- struct device_node *child;
+ struct fwnode_handle *child;
unsigned int index = 0;
int ret;
- vadc->nchannels = of_get_available_child_count(node);
+ vadc->nchannels = device_get_child_node_count(vadc->dev);
if (!vadc->nchannels)
return -EINVAL;
@@ -756,10 +757,10 @@ static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node)
iio_chan = vadc->iio_chans;
- for_each_available_child_of_node(node, child) {
- ret = vadc_get_dt_channel_data(vadc->dev, &prop, child);
+ device_for_each_child_node(vadc->dev, child) {
+ ret = vadc_get_fw_channel_data(vadc->dev, &prop, child);
if (ret) {
- of_node_put(child);
+ fwnode_handle_put(child);
return ret;
}
@@ -848,7 +849,6 @@ static int vadc_check_revision(struct vadc_priv *vadc)
static int vadc_probe(struct platform_device *pdev)
{
- struct device_node *node = pdev->dev.of_node;
struct device *dev = &pdev->dev;
struct iio_dev *indio_dev;
struct vadc_priv *vadc;
@@ -860,7 +860,7 @@ static int vadc_probe(struct platform_device *pdev)
if (!regmap)
return -ENODEV;
- ret = of_property_read_u32(node, "reg", &reg);
+ ret = device_property_read_u32(dev, "reg", &reg);
if (ret < 0)
return ret;
@@ -880,7 +880,7 @@ static int vadc_probe(struct platform_device *pdev)
if (ret)
return ret;
- ret = vadc_get_dt_data(vadc, node);
+ ret = vadc_get_fw_data(vadc);
if (ret)
return ret;
diff --git a/drivers/iio/adc/rtq6056.c b/drivers/iio/adc/rtq6056.c
new file mode 100644
index 000000000000..c1b2e8dc9a26
--- /dev/null
+++ b/drivers/iio/adc/rtq6056.c
@@ -0,0 +1,661 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 Richtek Technology Corp.
+ *
+ * ChiYuan Huang <cy_huang@richtek.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/util_macros.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define RTQ6056_REG_CONFIG 0x00
+#define RTQ6056_REG_SHUNTVOLT 0x01
+#define RTQ6056_REG_BUSVOLT 0x02
+#define RTQ6056_REG_POWER 0x03
+#define RTQ6056_REG_CURRENT 0x04
+#define RTQ6056_REG_CALIBRATION 0x05
+#define RTQ6056_REG_MASKENABLE 0x06
+#define RTQ6056_REG_ALERTLIMIT 0x07
+#define RTQ6056_REG_MANUFACTID 0xFE
+#define RTQ6056_REG_DIEID 0xFF
+
+#define RTQ6056_VENDOR_ID 0x1214
+#define RTQ6056_DEFAULT_CONFIG 0x4127
+#define RTQ6056_CONT_ALLON 7
+
+enum {
+ RTQ6056_CH_VSHUNT = 0,
+ RTQ6056_CH_VBUS,
+ RTQ6056_CH_POWER,
+ RTQ6056_CH_CURRENT,
+ RTQ6056_MAX_CHANNEL
+};
+
+enum {
+ F_OPMODE = 0,
+ F_VSHUNTCT,
+ F_VBUSCT,
+ F_AVG,
+ F_RESET,
+ F_MAX_FIELDS
+};
+
+struct rtq6056_priv {
+ struct device *dev;
+ struct regmap *regmap;
+ struct regmap_field *rm_fields[F_MAX_FIELDS];
+ u32 shunt_resistor_uohm;
+ int vshuntct_us;
+ int vbusct_us;
+ int avg_sample;
+};
+
+static const struct reg_field rtq6056_reg_fields[F_MAX_FIELDS] = {
+ [F_OPMODE] = REG_FIELD(RTQ6056_REG_CONFIG, 0, 2),
+ [F_VSHUNTCT] = REG_FIELD(RTQ6056_REG_CONFIG, 3, 5),
+ [F_VBUSCT] = REG_FIELD(RTQ6056_REG_CONFIG, 6, 8),
+ [F_AVG] = REG_FIELD(RTQ6056_REG_CONFIG, 9, 11),
+ [F_RESET] = REG_FIELD(RTQ6056_REG_CONFIG, 15, 15),
+};
+
+static const struct iio_chan_spec rtq6056_channels[RTQ6056_MAX_CHANNEL + 1] = {
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 0,
+ .address = RTQ6056_REG_SHUNTVOLT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .scan_index = 0,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_CPU,
+ },
+ },
+ {
+ .type = IIO_VOLTAGE,
+ .indexed = 1,
+ .channel = 1,
+ .address = RTQ6056_REG_BUSVOLT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .scan_index = 1,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_CPU,
+ },
+ },
+ {
+ .type = IIO_POWER,
+ .indexed = 1,
+ .channel = 2,
+ .address = RTQ6056_REG_POWER,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .scan_index = 2,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_CPU,
+ },
+ },
+ {
+ .type = IIO_CURRENT,
+ .indexed = 1,
+ .channel = 3,
+ .address = RTQ6056_REG_CURRENT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .scan_index = 3,
+ .scan_type = {
+ .sign = 's',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_CPU,
+ },
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(RTQ6056_MAX_CHANNEL),
+};
+
+static int rtq6056_adc_read_channel(struct rtq6056_priv *priv,
+ struct iio_chan_spec const *ch,
+ int *val)
+{
+ struct device *dev = priv->dev;
+ unsigned int addr = ch->address;
+ unsigned int regval;
+ int ret;
+
+ pm_runtime_get_sync(dev);
+ ret = regmap_read(priv->regmap, addr, &regval);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put(dev);
+ if (ret)
+ return ret;
+
+ /* Power and VBUS is unsigned 16-bit, others are signed 16-bit */
+ if (addr == RTQ6056_REG_BUSVOLT || addr == RTQ6056_REG_POWER)
+ *val = regval;
+ else
+ *val = sign_extend32(regval, 16);
+
+ return IIO_VAL_INT;
+}
+
+static int rtq6056_adc_read_scale(struct iio_chan_spec const *ch, int *val,
+ int *val2)
+{
+ switch (ch->address) {
+ case RTQ6056_REG_SHUNTVOLT:
+ /* VSHUNT lsb 2.5uV */
+ *val = 2500;
+ *val2 = 1000000;
+ return IIO_VAL_FRACTIONAL;
+ case RTQ6056_REG_BUSVOLT:
+ /* VBUS lsb 1.25mV */
+ *val = 1250;
+ *val2 = 1000;
+ return IIO_VAL_FRACTIONAL;
+ case RTQ6056_REG_POWER:
+ /* Power lsb 25mW */
+ *val = 25;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
+
+/*
+ * Sample frequency for channel VSHUNT and VBUS. The indices correspond
+ * with the bit value expected by the chip. And it can be found at
+ * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
+ */
+static const int rtq6056_samp_freq_list[] = {
+ 7194, 4926, 3717, 1904, 964, 485, 243, 122,
+};
+
+static int rtq6056_adc_set_samp_freq(struct rtq6056_priv *priv,
+ struct iio_chan_spec const *ch, int val)
+{
+ struct regmap_field *rm_field;
+ unsigned int selector;
+ int *ct, ret;
+
+ if (val > 7194 || val < 122)
+ return -EINVAL;
+
+ if (ch->address == RTQ6056_REG_SHUNTVOLT) {
+ rm_field = priv->rm_fields[F_VSHUNTCT];
+ ct = &priv->vshuntct_us;
+ } else if (ch->address == RTQ6056_REG_BUSVOLT) {
+ rm_field = priv->rm_fields[F_VBUSCT];
+ ct = &priv->vbusct_us;
+ } else
+ return -EINVAL;
+
+ selector = find_closest_descending(val, rtq6056_samp_freq_list,
+ ARRAY_SIZE(rtq6056_samp_freq_list));
+
+ ret = regmap_field_write(rm_field, selector);
+ if (ret)
+ return ret;
+
+ *ct = 1000000 / rtq6056_samp_freq_list[selector];
+
+ return 0;
+}
+
+/*
+ * Available averaging rate for rtq6056. The indices correspond with the bit
+ * value expected by the chip. And it can be found at
+ * https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
+ */
+static const int rtq6056_avg_sample_list[] = {
+ 1, 4, 16, 64, 128, 256, 512, 1024,
+};
+
+static int rtq6056_adc_set_average(struct rtq6056_priv *priv, int val)
+{
+ unsigned int selector;
+ int ret;
+
+ if (val > 1024 || val < 1)
+ return -EINVAL;
+
+ selector = find_closest(val, rtq6056_avg_sample_list,
+ ARRAY_SIZE(rtq6056_avg_sample_list));
+
+ ret = regmap_field_write(priv->rm_fields[F_AVG], selector);
+ if (ret)
+ return ret;
+
+ priv->avg_sample = rtq6056_avg_sample_list[selector];
+
+ return 0;
+}
+
+static int rtq6056_adc_get_sample_freq(struct rtq6056_priv *priv,
+ struct iio_chan_spec const *ch, int *val)
+{
+ int sample_time;
+
+ if (ch->address == RTQ6056_REG_SHUNTVOLT)
+ sample_time = priv->vshuntct_us;
+ else if (ch->address == RTQ6056_REG_BUSVOLT)
+ sample_time = priv->vbusct_us;
+ else {
+ sample_time = priv->vshuntct_us + priv->vbusct_us;
+ sample_time *= priv->avg_sample;
+ }
+
+ *val = 1000000 / sample_time;
+
+ return IIO_VAL_INT;
+}
+
+static int rtq6056_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct rtq6056_priv *priv = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ return rtq6056_adc_read_channel(priv, chan, val);
+ case IIO_CHAN_INFO_SCALE:
+ return rtq6056_adc_read_scale(chan, val, val2);
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *val = priv->avg_sample;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return rtq6056_adc_get_sample_freq(priv, chan, val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int rtq6056_adc_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *vals = rtq6056_samp_freq_list;
+ *type = IIO_VAL_INT;
+ *length = ARRAY_SIZE(rtq6056_samp_freq_list);
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *vals = rtq6056_avg_sample_list;
+ *type = IIO_VAL_INT;
+ *length = ARRAY_SIZE(rtq6056_avg_sample_list);
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int rtq6056_adc_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val,
+ int val2, long mask)
+{
+ struct rtq6056_priv *priv = iio_priv(indio_dev);
+ int ret;
+
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ ret = rtq6056_adc_set_samp_freq(priv, chan, val);
+ break;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ ret = rtq6056_adc_set_average(priv, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ iio_device_release_direct_mode(indio_dev);
+
+ return ret;
+}
+
+static const char *rtq6056_channel_labels[RTQ6056_MAX_CHANNEL] = {
+ [RTQ6056_CH_VSHUNT] = "Vshunt",
+ [RTQ6056_CH_VBUS] = "Vbus",
+ [RTQ6056_CH_POWER] = "Power",
+ [RTQ6056_CH_CURRENT] = "Current",
+};
+
+static int rtq6056_adc_read_label(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ char *label)
+{
+ return sysfs_emit(label, "%s\n", rtq6056_channel_labels[chan->channel]);
+}
+
+static int rtq6056_set_shunt_resistor(struct rtq6056_priv *priv,
+ int resistor_uohm)
+{
+ unsigned int calib_val;
+ int ret;
+
+ if (resistor_uohm <= 0) {
+ dev_err(priv->dev, "Invalid resistor [%d]\n", resistor_uohm);
+ return -EINVAL;
+ }
+
+ /* calibration = 5120000 / (Rshunt (uOhm) * current lsb (1mA)) */
+ calib_val = 5120000 / resistor_uohm;
+ ret = regmap_write(priv->regmap, RTQ6056_REG_CALIBRATION, calib_val);
+ if (ret)
+ return ret;
+
+ priv->shunt_resistor_uohm = resistor_uohm;
+
+ return 0;
+}
+
+static ssize_t shunt_resistor_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rtq6056_priv *priv = iio_priv(dev_to_iio_dev(dev));
+ int vals[2] = { priv->shunt_resistor_uohm, 1000000 };
+
+ return iio_format_value(buf, IIO_VAL_FRACTIONAL, 1, vals);
+}
+
+static ssize_t shunt_resistor_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct rtq6056_priv *priv = iio_priv(indio_dev);
+ int val, val_fract, ret;
+
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = iio_str_to_fixpoint(buf, 100000, &val, &val_fract);
+ if (ret)
+ goto out_store;
+
+ ret = rtq6056_set_shunt_resistor(priv, val * 1000000 + val_fract);
+
+out_store:
+ iio_device_release_direct_mode(indio_dev);
+
+ return ret ?: len;
+}
+
+static IIO_DEVICE_ATTR_RW(shunt_resistor, 0);
+
+static struct attribute *rtq6056_attributes[] = {
+ &iio_dev_attr_shunt_resistor.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group rtq6056_attribute_group = {
+ .attrs = rtq6056_attributes,
+};
+
+static const struct iio_info rtq6056_info = {
+ .attrs = &rtq6056_attribute_group,
+ .read_raw = rtq6056_adc_read_raw,
+ .read_avail = rtq6056_adc_read_avail,
+ .write_raw = rtq6056_adc_write_raw,
+ .read_label = rtq6056_adc_read_label,
+};
+
+static irqreturn_t rtq6056_buffer_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct rtq6056_priv *priv = iio_priv(indio_dev);
+ struct device *dev = priv->dev;
+ struct {
+ u16 vals[RTQ6056_MAX_CHANNEL];
+ s64 timestamp __aligned(8);
+ } data;
+ unsigned int raw;
+ int i = 0, bit, ret;
+
+ memset(&data, 0, sizeof(data));
+
+ pm_runtime_get_sync(dev);
+
+ for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) {
+ unsigned int addr = rtq6056_channels[bit].address;
+
+ ret = regmap_read(priv->regmap, addr, &raw);
+ if (ret)
+ goto out;
+
+ data.vals[i++] = raw;
+ }
+
+ iio_push_to_buffers_with_timestamp(indio_dev, &data, iio_get_time_ns(indio_dev));
+
+out:
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put(dev);
+
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static void rtq6056_enter_shutdown_state(void *dev)
+{
+ struct rtq6056_priv *priv = dev_get_drvdata(dev);
+
+ /* Enter shutdown state */
+ regmap_field_write(priv->rm_fields[F_OPMODE], 0);
+}
+
+static bool rtq6056_is_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case RTQ6056_REG_CONFIG ... RTQ6056_REG_ALERTLIMIT:
+ case RTQ6056_REG_MANUFACTID ... RTQ6056_REG_DIEID:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool rtq6056_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case RTQ6056_REG_CONFIG:
+ case RTQ6056_REG_CALIBRATION ... RTQ6056_REG_ALERTLIMIT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config rtq6056_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .val_format_endian = REGMAP_ENDIAN_BIG,
+ .max_register = RTQ6056_REG_DIEID,
+ .readable_reg = rtq6056_is_readable_reg,
+ .writeable_reg = rtq6056_is_writeable_reg,
+};
+
+static int rtq6056_probe(struct i2c_client *i2c)
+{
+ struct iio_dev *indio_dev;
+ struct rtq6056_priv *priv;
+ struct device *dev = &i2c->dev;
+ struct regmap *regmap;
+ unsigned int vendor_id, shunt_resistor_uohm;
+ int ret;
+
+ if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+ return -EOPNOTSUPP;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ priv = iio_priv(indio_dev);
+ priv->dev = dev;
+ priv->vshuntct_us = priv->vbusct_us = 1037;
+ priv->avg_sample = 1;
+ i2c_set_clientdata(i2c, priv);
+
+ regmap = devm_regmap_init_i2c(i2c, &rtq6056_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "Failed to init regmap\n");
+
+ priv->regmap = regmap;
+
+ ret = regmap_read(regmap, RTQ6056_REG_MANUFACTID, &vendor_id);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to get manufacturer info\n");
+
+ if (vendor_id != RTQ6056_VENDOR_ID)
+ return dev_err_probe(dev, -ENODEV,
+ "Invalid vendor id 0x%04x\n", vendor_id);
+
+ ret = devm_regmap_field_bulk_alloc(dev, regmap, priv->rm_fields,
+ rtq6056_reg_fields, F_MAX_FIELDS);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to init regmap field\n");
+
+ /*
+ * By default, configure average sample as 1, bus and shunt conversion
+ * time as 1037 microsecond, and operating mode to all on.
+ */
+ ret = regmap_write(regmap, RTQ6056_REG_CONFIG, RTQ6056_DEFAULT_CONFIG);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to enable continuous sensing\n");
+
+ ret = devm_add_action_or_reset(dev, rtq6056_enter_shutdown_state, dev);
+ if (ret)
+ return ret;
+
+ pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_mark_last_busy(dev);
+ ret = devm_pm_runtime_enable(dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to enable pm_runtime\n");
+
+ /* By default, use 2000 micro-Ohm resistor */
+ shunt_resistor_uohm = 2000;
+ device_property_read_u32(dev, "shunt-resistor-micro-ohms",
+ &shunt_resistor_uohm);
+
+ ret = rtq6056_set_shunt_resistor(priv, shunt_resistor_uohm);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to init shunt resistor\n");
+
+ indio_dev->name = "rtq6056";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = rtq6056_channels;
+ indio_dev->num_channels = ARRAY_SIZE(rtq6056_channels);
+ indio_dev->info = &rtq6056_info;
+
+ ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+ rtq6056_buffer_trigger_handler,
+ NULL);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to allocate iio trigger buffer\n");
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
+static int rtq6056_runtime_suspend(struct device *dev)
+{
+ struct rtq6056_priv *priv = dev_get_drvdata(dev);
+
+ /* Configure to shutdown mode */
+ return regmap_field_write(priv->rm_fields[F_OPMODE], 0);
+}
+
+static int rtq6056_runtime_resume(struct device *dev)
+{
+ struct rtq6056_priv *priv = dev_get_drvdata(dev);
+ int sample_rdy_time_us, ret;
+
+ ret = regmap_field_write(priv->rm_fields[F_OPMODE], RTQ6056_CONT_ALLON);
+ if (ret)
+ return ret;
+
+ sample_rdy_time_us = priv->vbusct_us + priv->vshuntct_us;
+ sample_rdy_time_us *= priv->avg_sample;
+
+ usleep_range(sample_rdy_time_us, sample_rdy_time_us + 100);
+
+ return 0;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(rtq6056_pm_ops, rtq6056_runtime_suspend,
+ rtq6056_runtime_resume, NULL);
+
+static const struct of_device_id rtq6056_device_match[] = {
+ { .compatible = "richtek,rtq6056" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rtq6056_device_match);
+
+static struct i2c_driver rtq6056_driver = {
+ .driver = {
+ .name = "rtq6056",
+ .of_match_table = rtq6056_device_match,
+ .pm = pm_ptr(&rtq6056_pm_ops),
+ },
+ .probe_new = rtq6056_probe,
+};
+module_i2c_driver(rtq6056_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_DESCRIPTION("Richtek RTQ6056 Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-core.c
index 1ce52af3fe8b..81d5db91c67b 100644
--- a/drivers/iio/adc/stm32-adc-core.c
+++ b/drivers/iio/adc/stm32-adc-core.c
@@ -9,6 +9,7 @@
*
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/irqchip/chained_irq.h>
@@ -62,6 +63,7 @@ struct stm32_adc_priv;
* @regs: common registers for all instances
* @clk_sel: clock selection routine
* @max_clk_rate_hz: maximum analog clock rate (Hz, from datasheet)
+ * @ipid: adc identification number
* @has_syscfg: SYSCFG capability flags
* @num_irqs: number of interrupt lines
* @num_adcs: maximum number of ADC instances in the common registers
@@ -70,6 +72,7 @@ struct stm32_adc_priv_cfg {
const struct stm32_adc_common_regs *regs;
int (*clk_sel)(struct platform_device *, struct stm32_adc_priv *);
u32 max_clk_rate_hz;
+ u32 ipid;
unsigned int has_syscfg;
unsigned int num_irqs;
unsigned int num_adcs;
@@ -78,6 +81,7 @@ struct stm32_adc_priv_cfg {
/**
* struct stm32_adc_priv - stm32 ADC core private data
* @irq: irq(s) for ADC block
+ * @nb_adc_max: actual maximum number of instance per ADC block
* @domain: irq domain reference
* @aclk: clock reference for the analog circuitry
* @bclk: bus clock common for all ADCs, depends on part used
@@ -95,6 +99,7 @@ struct stm32_adc_priv_cfg {
*/
struct stm32_adc_priv {
int irq[STM32_ADC_MAX_ADCS];
+ unsigned int nb_adc_max;
struct irq_domain *domain;
struct clk *aclk;
struct clk *bclk;
@@ -354,7 +359,7 @@ static void stm32_adc_irq_handler(struct irq_desc *desc)
* before invoking the interrupt handler (e.g. call ISR only for
* IRQ-enabled ADCs).
*/
- for (i = 0; i < priv->cfg->num_adcs; i++) {
+ for (i = 0; i < priv->nb_adc_max; i++) {
if ((status & priv->cfg->regs->eoc_msk[i] &&
stm32_adc_eoc_enabled(priv, i)) ||
(status & priv->cfg->regs->ovr_msk[i]))
@@ -424,7 +429,7 @@ static void stm32_adc_irq_remove(struct platform_device *pdev,
int hwirq;
unsigned int i;
- for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++)
+ for (hwirq = 0; hwirq < priv->nb_adc_max; hwirq++)
irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
irq_domain_remove(priv->domain);
@@ -642,6 +647,49 @@ static int stm32_adc_core_switches_probe(struct device *dev,
return 0;
}
+static int stm32_adc_probe_identification(struct platform_device *pdev,
+ struct stm32_adc_priv *priv)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *child;
+ const char *compat;
+ int ret, count = 0;
+ u32 id, val;
+
+ if (!priv->cfg->ipid)
+ return 0;
+
+ id = FIELD_GET(STM32MP1_IPIDR_MASK,
+ readl_relaxed(priv->common.base + STM32MP1_ADC_IPDR));
+ if (id != priv->cfg->ipid) {
+ dev_err(&pdev->dev, "Unexpected IP version: 0x%x", id);
+ return -EINVAL;
+ }
+
+ for_each_child_of_node(np, child) {
+ ret = of_property_read_string(child, "compatible", &compat);
+ if (ret)
+ continue;
+ /* Count child nodes with stm32 adc compatible */
+ if (strstr(compat, "st,stm32") && strstr(compat, "adc"))
+ count++;
+ }
+
+ val = readl_relaxed(priv->common.base + STM32MP1_ADC_HWCFGR0);
+ priv->nb_adc_max = FIELD_GET(STM32MP1_ADCNUM_MASK, val);
+ if (count > priv->nb_adc_max) {
+ dev_err(&pdev->dev, "Unexpected child number: %d", count);
+ return -EINVAL;
+ }
+
+ val = readl_relaxed(priv->common.base + STM32MP1_ADC_VERR);
+ dev_dbg(&pdev->dev, "ADC version: %lu.%lu\n",
+ FIELD_GET(STM32MP1_MAJREV_MASK, val),
+ FIELD_GET(STM32MP1_MINREV_MASK, val));
+
+ return 0;
+}
+
static int stm32_adc_probe(struct platform_device *pdev)
{
struct stm32_adc_priv *priv;
@@ -661,6 +709,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
priv->cfg = (const struct stm32_adc_priv_cfg *)
of_match_device(dev->driver->of_match_table, dev)->data;
+ priv->nb_adc_max = priv->cfg->num_adcs;
spin_lock_init(&priv->common.lock);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -703,6 +752,10 @@ static int stm32_adc_probe(struct platform_device *pdev)
if (ret)
goto err_pm_stop;
+ ret = stm32_adc_probe_identification(pdev, priv);
+ if (ret < 0)
+ goto err_hw_stop;
+
ret = regulator_get_voltage(priv->vref);
if (ret < 0) {
dev_err(&pdev->dev, "vref get voltage failed, %d\n", ret);
@@ -811,8 +864,8 @@ static const struct stm32_adc_priv_cfg stm32mp1_adc_priv_cfg = {
.clk_sel = stm32h7_adc_clk_sel,
.max_clk_rate_hz = 36000000,
.has_syscfg = HAS_VBOOSTER | HAS_ANASWVDD,
+ .ipid = STM32MP15_IPIDR_NUMBER,
.num_irqs = 2,
- .num_adcs = 2,
};
static const struct of_device_id stm32_adc_of_match[] = {
diff --git a/drivers/iio/adc/stm32-adc-core.h b/drivers/iio/adc/stm32-adc-core.h
index faedf7a49555..2118ef63843d 100644
--- a/drivers/iio/adc/stm32-adc-core.h
+++ b/drivers/iio/adc/stm32-adc-core.h
@@ -24,6 +24,7 @@
* | 0x300 | Master & Slave common regs |
* --------------------------------------------------------
*/
+/* Maximum ADC instances number per ADC block for all supported SoCs */
#define STM32_ADC_MAX_ADCS 3
#define STM32_ADC_OFFSET 0x100
#define STM32_ADCX_COMN_OFFSET 0x300
@@ -105,6 +106,12 @@
/* STM32MP1 - ADC2 instance option register */
#define STM32MP1_ADC2_OR 0xD0
+/* STM32MP1 - Identification registers */
+#define STM32MP1_ADC_HWCFGR0 0x3F0
+#define STM32MP1_ADC_VERR 0x3F4
+#define STM32MP1_ADC_IPDR 0x3F8
+#define STM32MP1_ADC_SIDR 0x3FC
+
/* STM32H7 - common registers for all ADC instances */
#define STM32H7_ADC_CSR (STM32_ADCX_COMN_OFFSET + 0x00)
#define STM32H7_ADC_CCR (STM32_ADCX_COMN_OFFSET + 0x08)
@@ -181,6 +188,30 @@ enum stm32h7_adc_dmngt {
/* STM32MP1_ADC2_OR - bit fields */
#define STM32MP1_VDDCOREEN BIT(0)
+/* STM32MP1_ADC_HWCFGR0 - bit fields */
+#define STM32MP1_ADCNUM_SHIFT 0
+#define STM32MP1_ADCNUM_MASK GENMASK(3, 0)
+#define STM32MP1_MULPIPE_SHIFT 4
+#define STM32MP1_MULPIPE_MASK GENMASK(7, 4)
+#define STM32MP1_OPBITS_SHIFT 8
+#define STM32MP1_OPBITS_MASK GENMASK(11, 8)
+#define STM32MP1_IDLEVALUE_SHIFT 12
+#define STM32MP1_IDLEVALUE_MASK GENMASK(15, 12)
+
+/* STM32MP1_ADC_VERR - bit fields */
+#define STM32MP1_MINREV_SHIFT 0
+#define STM32MP1_MINREV_MASK GENMASK(3, 0)
+#define STM32MP1_MAJREV_SHIFT 4
+#define STM32MP1_MAJREV_MASK GENMASK(7, 4)
+
+/* STM32MP1_ADC_IPDR - bit fields */
+#define STM32MP1_IPIDR_MASK GENMASK(31, 0)
+
+/* STM32MP1_ADC_SIDR - bit fields */
+#define STM32MP1_SIDR_MASK GENMASK(31, 0)
+
+#define STM32MP15_IPIDR_NUMBER 0x00110005
+
/**
* struct stm32_adc_common - stm32 ADC driver common data (for all instances)
* @base: control registers base cpu addr
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 130e8dd6f0c8..6256977eb7f7 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -21,11 +21,11 @@
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/nvmem-consumer.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/property.h>
#include "stm32-adc-core.h"
@@ -241,6 +241,7 @@ struct stm32_adc_cfg {
* @chan_name: channel name array
* @num_diff: number of differential channels
* @int_ch: internal channel indexes array
+ * @nsmps: number of channels with optional sample time
*/
struct stm32_adc {
struct stm32_adc_common *common;
@@ -267,6 +268,7 @@ struct stm32_adc {
char chan_name[STM32_ADC_CH_MAX][STM32_ADC_CH_SZ];
u32 num_diff;
int int_ch[STM32_ADC_INT_CH_NB];
+ int nsmps;
};
struct stm32_adc_diff_channel {
@@ -1520,8 +1522,8 @@ static int stm32_adc_update_scan_mode(struct iio_dev *indio_dev,
return ret;
}
-static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
- const struct of_phandle_args *iiospec)
+static int stm32_adc_fwnode_xlate(struct iio_dev *indio_dev,
+ const struct fwnode_reference_args *iiospec)
{
int i;
@@ -1575,7 +1577,7 @@ static const struct iio_info stm32_adc_iio_info = {
.hwfifo_set_watermark = stm32_adc_set_watermark,
.update_scan_mode = stm32_adc_update_scan_mode,
.debugfs_reg_access = stm32_adc_debugfs_reg_access,
- .of_xlate = stm32_adc_of_xlate,
+ .fwnode_xlate = stm32_adc_fwnode_xlate,
};
static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc)
@@ -1772,14 +1774,14 @@ static const struct iio_chan_spec_ext_info stm32_adc_ext_info[] = {
{},
};
-static int stm32_adc_of_get_resolution(struct iio_dev *indio_dev)
+static int stm32_adc_fw_get_resolution(struct iio_dev *indio_dev)
{
- struct device_node *node = indio_dev->dev.of_node;
+ struct device *dev = &indio_dev->dev;
struct stm32_adc *adc = iio_priv(indio_dev);
unsigned int i;
u32 res;
- if (of_property_read_u32(node, "assigned-resolution-bits", &res))
+ if (device_property_read_u32(dev, "assigned-resolution-bits", &res))
res = adc->cfg->adc_info->resolutions[0];
for (i = 0; i < adc->cfg->adc_info->num_res; i++)
@@ -1863,11 +1865,11 @@ static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm32_adc *adc)
{
- struct device_node *node = indio_dev->dev.of_node;
+ struct device *dev = &indio_dev->dev;
const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
int num_channels = 0, ret;
- ret = of_property_count_u32_elems(node, "st,adc-channels");
+ ret = device_property_count_u32(dev, "st,adc-channels");
if (ret > adc_info->max_channels) {
dev_err(&indio_dev->dev, "Bad st,adc-channels?\n");
return -EINVAL;
@@ -1875,8 +1877,15 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
num_channels += ret;
}
- ret = of_property_count_elems_of_size(node, "st,adc-diff-channels",
- sizeof(struct stm32_adc_diff_channel));
+ /*
+ * each st,adc-diff-channels is a group of 2 u32 so we divide @ret
+ * to get the *real* number of channels.
+ */
+ ret = device_property_count_u32(dev, "st,adc-diff-channels");
+ if (ret < 0)
+ return ret;
+
+ ret /= (int)(sizeof(struct stm32_adc_diff_channel) / sizeof(u32));
if (ret > adc_info->max_channels) {
dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n");
return -EINVAL;
@@ -1886,8 +1895,8 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
}
/* Optional sample time is provided either for each, or all channels */
- ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs");
- if (ret > 1 && ret != num_channels) {
+ adc->nsmps = device_property_count_u32(dev, "st,min-sample-time-nsecs");
+ if (adc->nsmps > 1 && adc->nsmps != num_channels) {
dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n");
return -EINVAL;
}
@@ -1897,21 +1906,20 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
struct stm32_adc *adc,
- struct iio_chan_spec *channels)
+ struct iio_chan_spec *channels,
+ int nchans)
{
- struct device_node *node = indio_dev->dev.of_node;
const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
struct stm32_adc_diff_channel diff[STM32_ADC_CH_MAX];
+ struct device *dev = &indio_dev->dev;
u32 num_diff = adc->num_diff;
int size = num_diff * sizeof(*diff) / sizeof(u32);
- int scan_index = 0, val, ret, i;
- struct property *prop;
- const __be32 *cur;
- u32 smp = 0;
+ int scan_index = 0, ret, i, c;
+ u32 smp = 0, smps[STM32_ADC_CH_MAX], chans[STM32_ADC_CH_MAX];
if (num_diff) {
- ret = of_property_read_u32_array(node, "st,adc-diff-channels",
- (u32 *)diff, size);
+ ret = device_property_read_u32_array(dev, "st,adc-diff-channels",
+ (u32 *)diff, size);
if (ret) {
dev_err(&indio_dev->dev, "Failed to get diff channels %d\n", ret);
return ret;
@@ -1932,32 +1940,47 @@ static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
}
}
- of_property_for_each_u32(node, "st,adc-channels", prop, cur, val) {
- if (val >= adc_info->max_channels) {
- dev_err(&indio_dev->dev, "Invalid channel %d\n", val);
+ ret = device_property_read_u32_array(dev, "st,adc-channels", chans,
+ nchans);
+ if (ret)
+ return ret;
+
+ for (c = 0; c < nchans; c++) {
+ if (chans[c] >= adc_info->max_channels) {
+ dev_err(&indio_dev->dev, "Invalid channel %d\n",
+ chans[c]);
return -EINVAL;
}
/* Channel can't be configured both as single-ended & diff */
for (i = 0; i < num_diff; i++) {
- if (val == diff[i].vinp) {
- dev_err(&indio_dev->dev, "channel %d misconfigured\n", val);
+ if (chans[c] == diff[i].vinp) {
+ dev_err(&indio_dev->dev, "channel %d misconfigured\n", chans[c]);
return -EINVAL;
}
}
- stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
- 0, scan_index, false);
+ stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
+ chans[c], 0, scan_index, false);
scan_index++;
}
+ if (adc->nsmps > 0) {
+ ret = device_property_read_u32_array(dev, "st,min-sample-time-nsecs",
+ smps, adc->nsmps);
+ if (ret)
+ return ret;
+ }
+
for (i = 0; i < scan_index; i++) {
/*
- * Using of_property_read_u32_index(), smp value will only be
- * modified if valid u32 value can be decoded. This allows to
- * get either no value, 1 shared value for all indexes, or one
- * value per channel.
+ * This check is used with the above logic so that smp value
+ * will only be modified if valid u32 value can be decoded. This
+ * allows to get either no value, 1 shared value for all indexes,
+ * or one value per channel. The point is to have the same
+ * behavior as 'of_property_read_u32_index()'.
*/
- of_property_read_u32_index(node, "st,min-sample-time-nsecs", i, &smp);
+ if (i < adc->nsmps)
+ smp = smps[i];
/* Prepare sampling time settings */
stm32_adc_smpr_init(adc, channels[i].channel, smp);
@@ -2005,22 +2028,21 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
struct stm32_adc *adc,
struct iio_chan_spec *channels)
{
- struct device_node *node = indio_dev->dev.of_node;
const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
- struct device_node *child;
+ struct fwnode_handle *child;
const char *name;
int val, scan_index = 0, ret;
bool differential;
u32 vin[2];
- for_each_available_child_of_node(node, child) {
- ret = of_property_read_u32(child, "reg", &val);
+ device_for_each_child_node(&indio_dev->dev, child) {
+ ret = fwnode_property_read_u32(child, "reg", &val);
if (ret) {
dev_err(&indio_dev->dev, "Missing channel index %d\n", ret);
goto err;
}
- ret = of_property_read_string(child, "label", &name);
+ ret = fwnode_property_read_string(child, "label", &name);
/* label is optional */
if (!ret) {
if (strlen(name) >= STM32_ADC_CH_SZ) {
@@ -2047,7 +2069,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
}
differential = false;
- ret = of_property_read_u32_array(child, "diff-channels", vin, 2);
+ ret = fwnode_property_read_u32_array(child, "diff-channels", vin, 2);
/* diff-channels is optional */
if (!ret) {
differential = true;
@@ -2064,7 +2086,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
vin[1], scan_index, differential);
- ret = of_property_read_u32(child, "st,min-sample-time-ns", &val);
+ ret = fwnode_property_read_u32(child, "st,min-sample-time-ns", &val);
/* st,min-sample-time-ns is optional */
if (!ret) {
stm32_adc_smpr_init(adc, channels[scan_index].channel, val);
@@ -2082,14 +2104,13 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
return scan_index;
err:
- of_node_put(child);
+ fwnode_handle_put(child);
return ret;
}
-static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
+static int stm32_adc_chan_fw_init(struct iio_dev *indio_dev, bool timestamping)
{
- struct device_node *node = indio_dev->dev.of_node;
struct stm32_adc *adc = iio_priv(indio_dev);
const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
struct iio_chan_spec *channels;
@@ -2099,7 +2120,7 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
for (i = 0; i < STM32_ADC_INT_CH_NB; i++)
adc->int_ch[i] = STM32_ADC_INT_CH_NONE;
- num_channels = of_get_available_child_count(node);
+ num_channels = device_get_child_node_count(&indio_dev->dev);
/* If no channels have been found, fallback to channels legacy properties. */
if (!num_channels) {
legacy = true;
@@ -2130,7 +2151,8 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
return -ENOMEM;
if (legacy)
- ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels);
+ ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels,
+ num_channels);
else
ret = stm32_adc_generic_chan_init(indio_dev, adc, channels);
if (ret < 0)
@@ -2212,9 +2234,6 @@ static int stm32_adc_probe(struct platform_device *pdev)
bool timestamping = false;
int ret;
- if (!pdev->dev.of_node)
- return -ENODEV;
-
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
if (!indio_dev)
return -ENOMEM;
@@ -2223,17 +2242,16 @@ static int stm32_adc_probe(struct platform_device *pdev)
adc->common = dev_get_drvdata(pdev->dev.parent);
spin_lock_init(&adc->lock);
init_completion(&adc->completion);
- adc->cfg = (const struct stm32_adc_cfg *)
- of_match_device(dev->driver->of_match_table, dev)->data;
+ adc->cfg = device_get_match_data(dev);
indio_dev->name = dev_name(&pdev->dev);
- indio_dev->dev.of_node = pdev->dev.of_node;
+ device_set_node(&indio_dev->dev, dev_fwnode(&pdev->dev));
indio_dev->info = &stm32_adc_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE | INDIO_HARDWARE_TRIGGERED;
platform_set_drvdata(pdev, indio_dev);
- ret = of_property_read_u32(pdev->dev.of_node, "reg", &adc->offset);
+ ret = device_property_read_u32(dev, "reg", &adc->offset);
if (ret != 0) {
dev_err(&pdev->dev, "missing reg property\n");
return -EINVAL;
@@ -2262,7 +2280,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
}
}
- ret = stm32_adc_of_get_resolution(indio_dev);
+ ret = stm32_adc_fw_get_resolution(indio_dev);
if (ret < 0)
return ret;
@@ -2279,7 +2297,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
timestamping = true;
}
- ret = stm32_adc_chan_of_init(indio_dev, timestamping);
+ ret = stm32_adc_chan_fw_init(indio_dev, timestamping);
if (ret < 0)
goto err_dma_disable;
diff --git a/drivers/iio/adc/ti-ads131e08.c b/drivers/iio/adc/ti-ads131e08.c
index 32237cacc9a3..5235a93f28bc 100644
--- a/drivers/iio/adc/ti-ads131e08.c
+++ b/drivers/iio/adc/ti-ads131e08.c
@@ -797,13 +797,6 @@ static void ads131e08_regulator_disable(void *data)
regulator_disable(st->vref_reg);
}
-static void ads131e08_clk_disable(void *data)
-{
- struct ads131e08_state *st = data;
-
- clk_disable_unprepare(st->adc_clk);
-}
-
static int ads131e08_probe(struct spi_device *spi)
{
const struct ads131e08_info *info;
@@ -896,21 +889,11 @@ static int ads131e08_probe(struct spi_device *spi)
st->vref_reg = NULL;
}
- st->adc_clk = devm_clk_get(&spi->dev, "adc-clk");
+ st->adc_clk = devm_clk_get_enabled(&spi->dev, "adc-clk");
if (IS_ERR(st->adc_clk))
return dev_err_probe(&spi->dev, PTR_ERR(st->adc_clk),
"failed to get the ADC clock\n");
- ret = clk_prepare_enable(st->adc_clk);
- if (ret) {
- dev_err(&spi->dev, "failed to prepare/enable the ADC clock\n");
- return ret;
- }
-
- ret = devm_add_action_or_reset(&spi->dev, ads131e08_clk_disable, st);
- if (ret)
- return ret;
-
adc_clk_hz = clk_get_rate(st->adc_clk);
if (!adc_clk_hz) {
dev_err(&spi->dev, "failed to get the ADC clock rate\n");
diff --git a/drivers/iio/adc/ti-tsc2046.c b/drivers/iio/adc/ti-tsc2046.c
index 0d9436a69cbf..1bbb51a6683c 100644
--- a/drivers/iio/adc/ti-tsc2046.c
+++ b/drivers/iio/adc/ti-tsc2046.c
@@ -8,7 +8,9 @@
#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
+#include <linux/units.h>
#include <asm/unaligned.h>
@@ -139,6 +141,7 @@ enum tsc2046_state {
struct tsc2046_adc_priv {
struct spi_device *spi;
const struct tsc2046_adc_dcfg *dcfg;
+ struct regulator *vref_reg;
struct iio_trigger *trig;
struct hrtimer trig_timer;
@@ -173,6 +176,7 @@ struct tsc2046_adc_priv {
u32 scan_interval_us;
u32 time_per_scan_us;
u32 time_per_bit_ns;
+ unsigned int vref_mv;
struct tsc2046_adc_ch_cfg ch_cfg[TI_TSC2046_MAX_CHAN];
};
@@ -252,7 +256,9 @@ static u8 tsc2046_adc_get_cmd(struct tsc2046_adc_priv *priv, int ch_idx,
case TI_TSC2046_ADDR_AUX:
case TI_TSC2046_ADDR_VBAT:
case TI_TSC2046_ADDR_TEMP0:
- pd |= TI_TSC2046_SER | TI_TSC2046_PD1_VREF_ON;
+ pd |= TI_TSC2046_SER;
+ if (!priv->vref_reg)
+ pd |= TI_TSC2046_PD1_VREF_ON;
}
return TI_TSC2046_START | FIELD_PREP(TI_TSC2046_ADDR, ch_idx) | pd;
@@ -468,7 +474,7 @@ static int tsc2046_adc_read_raw(struct iio_dev *indio_dev,
* So, it is better to use external voltage-divider driver
* instead, which is calculating complete chain.
*/
- *val = TI_TSC2046_INT_VREF;
+ *val = priv->vref_mv;
*val2 = chan->scan_type.realbits;
return IIO_VAL_FRACTIONAL_LOG2;
}
@@ -740,6 +746,49 @@ static void tsc2046_adc_parse_fwnode(struct tsc2046_adc_priv *priv)
}
}
+static void tsc2046_adc_regulator_disable(void *data)
+{
+ struct tsc2046_adc_priv *priv = data;
+
+ regulator_disable(priv->vref_reg);
+}
+
+static int tsc2046_adc_configure_regulator(struct tsc2046_adc_priv *priv)
+{
+ struct device *dev = &priv->spi->dev;
+ int ret;
+
+ priv->vref_reg = devm_regulator_get_optional(dev, "vref");
+ if (IS_ERR(priv->vref_reg)) {
+ /* If regulator exists but can't be get, return an error */
+ if (PTR_ERR(priv->vref_reg) != -ENODEV)
+ return PTR_ERR(priv->vref_reg);
+ priv->vref_reg = NULL;
+ }
+ if (!priv->vref_reg) {
+ /* Use internal reference */
+ priv->vref_mv = TI_TSC2046_INT_VREF;
+ return 0;
+ }
+
+ ret = regulator_enable(priv->vref_reg);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(dev, tsc2046_adc_regulator_disable,
+ priv);
+ if (ret)
+ return ret;
+
+ ret = regulator_get_voltage(priv->vref_reg);
+ if (ret < 0)
+ return ret;
+
+ priv->vref_mv = ret / MILLI;
+
+ return 0;
+}
+
static int tsc2046_adc_probe(struct spi_device *spi)
{
const struct tsc2046_adc_dcfg *dcfg;
@@ -756,6 +805,11 @@ static int tsc2046_adc_probe(struct spi_device *spi)
}
dcfg = device_get_match_data(dev);
+ if (!dcfg) {
+ const struct spi_device_id *id = spi_get_device_id(spi);
+
+ dcfg = (const struct tsc2046_adc_dcfg *)id->driver_data;
+ }
if (!dcfg)
return -EINVAL;
@@ -781,6 +835,10 @@ static int tsc2046_adc_probe(struct spi_device *spi)
indio_dev->num_channels = dcfg->num_channels;
indio_dev->info = &tsc2046_adc_info;
+ ret = tsc2046_adc_configure_regulator(priv);
+ if (ret)
+ return ret;
+
tsc2046_adc_parse_fwnode(priv);
ret = tsc2046_adc_setup_spi_msg(priv);
@@ -833,11 +891,18 @@ static const struct of_device_id ads7950_of_table[] = {
};
MODULE_DEVICE_TABLE(of, ads7950_of_table);
+static const struct spi_device_id tsc2046_adc_spi_ids[] = {
+ { "tsc2046e-adc", (unsigned long)&tsc2046_adc_dcfg_tsc2046e },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, tsc2046_adc_spi_ids);
+
static struct spi_driver tsc2046_adc_driver = {
.driver = {
.name = "tsc2046",
.of_match_table = ads7950_of_table,
},
+ .id_table = tsc2046_adc_spi_ids,
.probe = tsc2046_adc_probe,
};
module_spi_driver(tsc2046_adc_driver);
diff --git a/drivers/iio/adc/xilinx-ams.c b/drivers/iio/adc/xilinx-ams.c
index 9cd2713146e5..5b4bdf3a26bb 100644
--- a/drivers/iio/adc/xilinx-ams.c
+++ b/drivers/iio/adc/xilinx-ams.c
@@ -1351,11 +1351,6 @@ static const struct of_device_id ams_of_match_table[] = {
};
MODULE_DEVICE_TABLE(of, ams_of_match_table);
-static void ams_clk_disable_unprepare(void *data)
-{
- clk_disable_unprepare(data);
-}
-
static int ams_probe(struct platform_device *pdev)
{
struct iio_dev *indio_dev;
@@ -1380,18 +1375,10 @@ static int ams_probe(struct platform_device *pdev)
if (IS_ERR(ams->base))
return PTR_ERR(ams->base);
- ams->clk = devm_clk_get(&pdev->dev, NULL);
+ ams->clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(ams->clk))
return PTR_ERR(ams->clk);
- ret = clk_prepare_enable(ams->clk);
- if (ret < 0)
- return ret;
-
- ret = devm_add_action_or_reset(&pdev->dev, ams_clk_disable_unprepare, ams->clk);
- if (ret < 0)
- return ret;
-
ret = devm_delayed_work_autocancel(&pdev->dev, &ams->ams_unmask_work,
ams_unmask_worker);
if (ret < 0)
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 1b247722ba25..292f2892d223 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -1296,13 +1296,6 @@ static const char * const xadc_type_names[] = {
[XADC_TYPE_US] = "xilinx-system-monitor",
};
-static void xadc_clk_disable_unprepare(void *data)
-{
- struct clk *clk = data;
-
- clk_disable_unprepare(clk);
-}
-
static void xadc_cancel_delayed_work(void *data)
{
struct delayed_work *work = data;
@@ -1374,19 +1367,10 @@ static int xadc_probe(struct platform_device *pdev)
}
}
- xadc->clk = devm_clk_get(dev, NULL);
+ xadc->clk = devm_clk_get_enabled(dev, NULL);
if (IS_ERR(xadc->clk))
return PTR_ERR(xadc->clk);
- ret = clk_prepare_enable(xadc->clk);
- if (ret)
- return ret;
-
- ret = devm_add_action_or_reset(dev,
- xadc_clk_disable_unprepare, xadc->clk);
- if (ret)
- return ret;
-
/*
* Make sure not to exceed the maximum samplerate since otherwise the
* resulting interrupt storm will soft-lock the system.
diff --git a/drivers/iio/addac/Kconfig b/drivers/iio/addac/Kconfig
index 138492362f20..fcf6d2269bfc 100644
--- a/drivers/iio/addac/Kconfig
+++ b/drivers/iio/addac/Kconfig
@@ -17,4 +17,20 @@ config AD74413R
To compile this driver as a module, choose M here: the
module will be called ad74413r.
+config STX104
+ tristate "Apex Embedded Systems STX104 driver"
+ depends on PC104 && X86
+ select ISA_BUS_API
+ select GPIOLIB
+ help
+ Say yes here to build support for the Apex Embedded Systems STX104
+ integrated analog PC/104 card.
+
+ This driver supports the 16 channels of single-ended (8 channels of
+ differential) analog inputs, 2 channels of analog output, 4 digital
+ inputs, and 4 digital outputs provided by the STX104.
+
+ The base port addresses for the devices may be configured via the base
+ array module parameter.
+
endmenu
diff --git a/drivers/iio/addac/Makefile b/drivers/iio/addac/Makefile
index cfd4bbe64ad3..17de20ef0d8e 100644
--- a/drivers/iio/addac/Makefile
+++ b/drivers/iio/addac/Makefile
@@ -5,3 +5,4 @@
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_AD74413R) += ad74413r.o
+obj-$(CONFIG_STX104) += stx104.o
diff --git a/drivers/iio/adc/stx104.c b/drivers/iio/addac/stx104.c
index 48a91a95e597..48a91a95e597 100644
--- a/drivers/iio/adc/stx104.c
+++ b/drivers/iio/addac/stx104.c
diff --git a/drivers/iio/cdc/Kconfig b/drivers/iio/cdc/Kconfig
index 5e3319a3ff48..e0a5ce66a984 100644
--- a/drivers/iio/cdc/Kconfig
+++ b/drivers/iio/cdc/Kconfig
@@ -14,4 +14,14 @@ config AD7150
To compile this driver as a module, choose M here: the
module will be called ad7150.
+config AD7746
+ tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver"
+ depends on I2C
+ help
+ Say yes here to build support for Analog Devices capacitive sensors.
+ (AD7745, AD7746, AD7747) Provides direct access via sysfs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7746.
+
endmenu
diff --git a/drivers/iio/cdc/Makefile b/drivers/iio/cdc/Makefile
index ee490637b032..41db756d8020 100644
--- a/drivers/iio/cdc/Makefile
+++ b/drivers/iio/cdc/Makefile
@@ -4,3 +4,4 @@
#
obj-$(CONFIG_AD7150) += ad7150.o
+obj-$(CONFIG_AD7746) += ad7746.o
diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/iio/cdc/ad7746.c
index 52b8957c19c9..b266f5328140 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/iio/cdc/ad7746.c
@@ -5,6 +5,7 @@
* Copyright 2011 Analog Devices Inc.
*/
+#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/i2c.h>
@@ -15,12 +16,12 @@
#include <linux/stat.h>
#include <linux/sysfs.h>
+#include <asm/unaligned.h>
+
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
-/*
- * AD7746 Register Definition
- */
+/* AD7746 Register Definition */
#define AD7746_REG_STATUS 0
#define AD7746_REG_CAP_DATA_HIGH 1
@@ -48,11 +49,12 @@
#define AD7746_CAPSETUP_CACHOP BIT(0)
/* Voltage/Temperature Setup Register Bit Designations (AD7746_REG_VT_SETUP) */
-#define AD7746_VTSETUP_VTEN (1 << 7)
-#define AD7746_VTSETUP_VTMD_INT_TEMP (0 << 5)
-#define AD7746_VTSETUP_VTMD_EXT_TEMP (1 << 5)
-#define AD7746_VTSETUP_VTMD_VDD_MON (2 << 5)
-#define AD7746_VTSETUP_VTMD_EXT_VIN (3 << 5)
+#define AD7746_VTSETUP_VTEN BIT(7)
+#define AD7746_VTSETUP_VTMD_MASK GENMASK(6, 5)
+#define AD7746_VTSETUP_VTMD_INT_TEMP 0
+#define AD7746_VTSETUP_VTMD_EXT_TEMP 1
+#define AD7746_VTSETUP_VTMD_VDD_MON 2
+#define AD7746_VTSETUP_VTMD_EXT_VIN 3
#define AD7746_VTSETUP_EXTREF BIT(4)
#define AD7746_VTSETUP_VTSHORT BIT(1)
#define AD7746_VTSETUP_VTCHOP BIT(0)
@@ -64,23 +66,22 @@
#define AD7746_EXCSETUP_NEXCB BIT(4)
#define AD7746_EXCSETUP_EXCA BIT(3)
#define AD7746_EXCSETUP_NEXCA BIT(2)
-#define AD7746_EXCSETUP_EXCLVL(x) (((x) & 0x3) << 0)
+#define AD7746_EXCSETUP_EXCLVL_MASK GENMASK(1, 0)
/* Config Register Bit Designations (AD7746_REG_CFG) */
-#define AD7746_CONF_VTFS_SHIFT 6
-#define AD7746_CONF_CAPFS_SHIFT 3
#define AD7746_CONF_VTFS_MASK GENMASK(7, 6)
#define AD7746_CONF_CAPFS_MASK GENMASK(5, 3)
-#define AD7746_CONF_MODE_IDLE (0 << 0)
-#define AD7746_CONF_MODE_CONT_CONV (1 << 0)
-#define AD7746_CONF_MODE_SINGLE_CONV (2 << 0)
-#define AD7746_CONF_MODE_PWRDN (3 << 0)
-#define AD7746_CONF_MODE_OFFS_CAL (5 << 0)
-#define AD7746_CONF_MODE_GAIN_CAL (6 << 0)
+#define AD7746_CONF_MODE_MASK GENMASK(2, 0)
+#define AD7746_CONF_MODE_IDLE 0
+#define AD7746_CONF_MODE_CONT_CONV 1
+#define AD7746_CONF_MODE_SINGLE_CONV 2
+#define AD7746_CONF_MODE_PWRDN 3
+#define AD7746_CONF_MODE_OFFS_CAL 5
+#define AD7746_CONF_MODE_GAIN_CAL 6
/* CAPDAC Register Bit Designations (AD7746_REG_CAPDACx) */
#define AD7746_CAPDAC_DACEN BIT(7)
-#define AD7746_CAPDAC_DACP(x) ((x) & 0x7F)
+#define AD7746_CAPDAC_DACP_MASK GENMASK(6, 0)
struct ad7746_chip_info {
struct i2c_client *client;
@@ -94,11 +95,6 @@ struct ad7746_chip_info {
u8 vt_setup;
u8 capdac[2][2];
s8 capdac_set;
-
- union {
- __be32 d32;
- u8 d8[4];
- } data ____cacheline_aligned;
};
enum ad7746_chan {
@@ -112,43 +108,87 @@ enum ad7746_chan {
CIN2_DIFF,
};
+struct ad7746_chan_info {
+ u8 addr;
+ union {
+ u8 vtmd;
+ struct { /* CAP SETUP fields */
+ unsigned int cin2 : 1;
+ unsigned int capdiff : 1;
+ };
+ };
+};
+
+static const struct ad7746_chan_info ad7746_chan_info[] = {
+ [VIN] = {
+ .addr = AD7746_REG_VT_DATA_HIGH,
+ .vtmd = AD7746_VTSETUP_VTMD_EXT_VIN,
+ },
+ [VIN_VDD] = {
+ .addr = AD7746_REG_VT_DATA_HIGH,
+ .vtmd = AD7746_VTSETUP_VTMD_VDD_MON,
+ },
+ [TEMP_INT] = {
+ .addr = AD7746_REG_VT_DATA_HIGH,
+ .vtmd = AD7746_VTSETUP_VTMD_INT_TEMP,
+ },
+ [TEMP_EXT] = {
+ .addr = AD7746_REG_VT_DATA_HIGH,
+ .vtmd = AD7746_VTSETUP_VTMD_EXT_TEMP,
+ },
+ [CIN1] = {
+ .addr = AD7746_REG_CAP_DATA_HIGH,
+ },
+ [CIN1_DIFF] = {
+ .addr = AD7746_REG_CAP_DATA_HIGH,
+ .capdiff = 1,
+ },
+ [CIN2] = {
+ .addr = AD7746_REG_CAP_DATA_HIGH,
+ .cin2 = 1,
+ },
+ [CIN2_DIFF] = {
+ .addr = AD7746_REG_CAP_DATA_HIGH,
+ .cin2 = 1,
+ .capdiff = 1,
+ },
+};
+
static const struct iio_chan_spec ad7746_channels[] = {
[VIN] = {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
- BIT(IIO_CHAN_INFO_SAMP_FREQ),
- .address = AD7746_REG_VT_DATA_HIGH << 8 |
- AD7746_VTSETUP_VTMD_EXT_VIN,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .address = VIN,
},
[VIN_VDD] = {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 1,
.extend_name = "supply",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
- BIT(IIO_CHAN_INFO_SAMP_FREQ),
- .address = AD7746_REG_VT_DATA_HIGH << 8 |
- AD7746_VTSETUP_VTMD_VDD_MON,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .address = VIN_VDD,
},
[TEMP_INT] = {
.type = IIO_TEMP,
.indexed = 1,
.channel = 0,
- .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
- .address = AD7746_REG_VT_DATA_HIGH << 8 |
- AD7746_VTSETUP_VTMD_INT_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .address = TEMP_INT,
},
[TEMP_EXT] = {
.type = IIO_TEMP,
.indexed = 1,
.channel = 1,
- .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
- .address = AD7746_REG_VT_DATA_HIGH << 8 |
- AD7746_VTSETUP_VTMD_EXT_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .address = TEMP_EXT,
},
[CIN1] = {
.type = IIO_CAPACITANCE,
@@ -158,7 +198,8 @@ static const struct iio_chan_spec ad7746_channels[] = {
BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
- .address = AD7746_REG_CAP_DATA_HIGH << 8,
+ .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .address = CIN1,
},
[CIN1_DIFF] = {
.type = IIO_CAPACITANCE,
@@ -167,11 +208,11 @@ static const struct iio_chan_spec ad7746_channels[] = {
.channel = 0,
.channel2 = 2,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
- BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+ BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_ZEROPOINT),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
- .address = AD7746_REG_CAP_DATA_HIGH << 8 |
- AD7746_CAPSETUP_CAPDIFF
+ .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .address = CIN1_DIFF,
},
[CIN2] = {
.type = IIO_CAPACITANCE,
@@ -181,8 +222,8 @@ static const struct iio_chan_spec ad7746_channels[] = {
BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
- .address = AD7746_REG_CAP_DATA_HIGH << 8 |
- AD7746_CAPSETUP_CIN2,
+ .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .address = CIN2,
},
[CIN2_DIFF] = {
.type = IIO_CAPACITANCE,
@@ -191,22 +232,22 @@ static const struct iio_chan_spec ad7746_channels[] = {
.channel = 1,
.channel2 = 3,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
- BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+ BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_ZEROPOINT),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
- .address = AD7746_REG_CAP_DATA_HIGH << 8 |
- AD7746_CAPSETUP_CAPDIFF | AD7746_CAPSETUP_CIN2,
+ .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .address = CIN2_DIFF,
}
};
/* Values are Update Rate (Hz), Conversion Time (ms) + 1*/
static const unsigned char ad7746_vt_filter_rate_table[][2] = {
- {50, 20 + 1}, {31, 32 + 1}, {16, 62 + 1}, {8, 122 + 1},
+ { 50, 20 + 1 }, { 31, 32 + 1 }, { 16, 62 + 1 }, { 8, 122 + 1 },
};
static const unsigned char ad7746_cap_filter_rate_table[][2] = {
- {91, 11 + 1}, {84, 12 + 1}, {50, 20 + 1}, {26, 38 + 1},
- {16, 62 + 1}, {13, 77 + 1}, {11, 92 + 1}, {9, 110 + 1},
+ { 91, 11 + 1 }, { 84, 12 + 1 }, { 50, 20 + 1 }, { 26, 38 + 1 },
+ { 16, 62 + 1 }, { 13, 77 + 1 }, { 11, 92 + 1 }, { 9, 110 + 1 },
};
static int ad7746_set_capdac(struct ad7746_chip_info *chip, int channel)
@@ -231,10 +272,13 @@ static int ad7746_select_channel(struct iio_dev *indio_dev,
switch (chan->type) {
case IIO_CAPACITANCE:
- cap_setup = (chan->address & 0xFF) | AD7746_CAPSETUP_CAPEN;
+ cap_setup = FIELD_PREP(AD7746_CAPSETUP_CIN2,
+ ad7746_chan_info[chan->address].cin2) |
+ FIELD_PREP(AD7746_CAPSETUP_CAPDIFF,
+ ad7746_chan_info[chan->address].capdiff) |
+ FIELD_PREP(AD7746_CAPSETUP_CAPEN, 1);
vt_setup = chip->vt_setup & ~AD7746_VTSETUP_VTEN;
- idx = (chip->config & AD7746_CONF_CAPFS_MASK) >>
- AD7746_CONF_CAPFS_SHIFT;
+ idx = FIELD_GET(AD7746_CONF_CAPFS_MASK, chip->config);
delay = ad7746_cap_filter_rate_table[idx][1];
ret = ad7746_set_capdac(chip, chan->channel);
@@ -246,10 +290,11 @@ static int ad7746_select_channel(struct iio_dev *indio_dev,
break;
case IIO_VOLTAGE:
case IIO_TEMP:
- vt_setup = (chan->address & 0xFF) | AD7746_VTSETUP_VTEN;
+ vt_setup = FIELD_PREP(AD7746_VTSETUP_VTMD_MASK,
+ ad7746_chan_info[chan->address].vtmd) |
+ FIELD_PREP(AD7746_VTSETUP_VTEN, 1);
cap_setup = chip->cap_setup & ~AD7746_CAPSETUP_CAPEN;
- idx = (chip->config & AD7746_CONF_VTFS_MASK) >>
- AD7746_CONF_VTFS_SHIFT;
+ idx = FIELD_GET(AD7746_CONF_VTFS_MASK, chip->config);
delay = ad7746_cap_filter_rate_table[idx][1];
break;
default:
@@ -332,7 +377,8 @@ static ssize_t ad7746_start_offset_calib(struct device *dev,
return ret;
return ad7746_start_calib(dev, attr, buf, len,
- AD7746_CONF_MODE_OFFS_CAL);
+ FIELD_PREP(AD7746_CONF_MODE_MASK,
+ AD7746_CONF_MODE_OFFS_CAL));
}
static ssize_t ad7746_start_gain_calib(struct device *dev,
@@ -347,7 +393,8 @@ static ssize_t ad7746_start_gain_calib(struct device *dev,
return ret;
return ad7746_start_calib(dev, attr, buf, len,
- AD7746_CONF_MODE_GAIN_CAL);
+ FIELD_PREP(AD7746_CONF_MODE_MASK,
+ AD7746_CONF_MODE_GAIN_CAL));
}
static IIO_DEVICE_ATTR(in_capacitance0_calibbias_calibration,
@@ -374,7 +421,7 @@ static int ad7746_store_cap_filter_rate_setup(struct ad7746_chip_info *chip,
i = ARRAY_SIZE(ad7746_cap_filter_rate_table) - 1;
chip->config &= ~AD7746_CONF_CAPFS_MASK;
- chip->config |= i << AD7746_CONF_CAPFS_SHIFT;
+ chip->config |= FIELD_PREP(AD7746_CONF_CAPFS_MASK, i);
return 0;
}
@@ -392,23 +439,17 @@ static int ad7746_store_vt_filter_rate_setup(struct ad7746_chip_info *chip,
i = ARRAY_SIZE(ad7746_vt_filter_rate_table) - 1;
chip->config &= ~AD7746_CONF_VTFS_MASK;
- chip->config |= i << AD7746_CONF_VTFS_SHIFT;
+ chip->config |= FIELD_PREP(AD7746_CONF_VTFS_MASK, i);
return 0;
}
-static IIO_CONST_ATTR(in_voltage_sampling_frequency_available, "50 31 16 8");
-static IIO_CONST_ATTR(in_capacitance_sampling_frequency_available,
- "91 84 50 26 16 13 11 9");
-
static struct attribute *ad7746_attributes[] = {
&iio_dev_attr_in_capacitance0_calibbias_calibration.dev_attr.attr,
&iio_dev_attr_in_capacitance0_calibscale_calibration.dev_attr.attr,
&iio_dev_attr_in_capacitance1_calibscale_calibration.dev_attr.attr,
&iio_dev_attr_in_capacitance1_calibbias_calibration.dev_attr.attr,
&iio_dev_attr_in_voltage0_calibscale_calibration.dev_attr.attr,
- &iio_const_attr_in_voltage_sampling_frequency_available.dev_attr.attr,
- &iio_const_attr_in_capacitance_sampling_frequency_available.dev_attr.attr,
NULL,
};
@@ -425,14 +466,10 @@ static int ad7746_write_raw(struct iio_dev *indio_dev,
struct ad7746_chip_info *chip = iio_priv(indio_dev);
int ret, reg;
- mutex_lock(&chip->lock);
-
switch (mask) {
case IIO_CHAN_INFO_CALIBSCALE:
- if (val != 1) {
- ret = -EINVAL;
- goto out;
- }
+ if (val != 1)
+ return -EINVAL;
val = (val2 * 1024) / 15625;
@@ -444,33 +481,32 @@ static int ad7746_write_raw(struct iio_dev *indio_dev,
reg = AD7746_REG_VOLT_GAINH;
break;
default:
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
+ mutex_lock(&chip->lock);
ret = i2c_smbus_write_word_swapped(chip->client, reg, val);
+ mutex_unlock(&chip->lock);
if (ret < 0)
- goto out;
+ return ret;
- ret = 0;
- break;
+ return 0;
case IIO_CHAN_INFO_CALIBBIAS:
- if (val < 0 || val > 0xFFFF) {
- ret = -EINVAL;
- goto out;
- }
+ if (val < 0 || val > 0xFFFF)
+ return -EINVAL;
+
+ mutex_lock(&chip->lock);
ret = i2c_smbus_write_word_swapped(chip->client,
AD7746_REG_CAP_OFFH, val);
+ mutex_unlock(&chip->lock);
if (ret < 0)
- goto out;
+ return ret;
- ret = 0;
- break;
+ return 0;
case IIO_CHAN_INFO_OFFSET:
- if (val < 0 || val > 43008000) { /* 21pF */
- ret = -EINVAL;
- goto out;
- }
+ case IIO_CHAN_INFO_ZEROPOINT:
+ if (val < 0 || val > 43008000) /* 21pF */
+ return -EINVAL;
/*
* CAPDAC Scale = 21pF_typ / 127
@@ -479,42 +515,104 @@ static int ad7746_write_raw(struct iio_dev *indio_dev,
*/
val /= 338646;
-
+ mutex_lock(&chip->lock);
chip->capdac[chan->channel][chan->differential] = val > 0 ?
- AD7746_CAPDAC_DACP(val) | AD7746_CAPDAC_DACEN : 0;
+ FIELD_PREP(AD7746_CAPDAC_DACP_MASK, val) | AD7746_CAPDAC_DACEN : 0;
ret = ad7746_set_capdac(chip, chan->channel);
- if (ret < 0)
- goto out;
+ if (ret < 0) {
+ mutex_unlock(&chip->lock);
+ return ret;
+ }
chip->capdac_set = chan->channel;
+ mutex_unlock(&chip->lock);
- ret = 0;
- break;
+ return 0;
case IIO_CHAN_INFO_SAMP_FREQ:
- if (val2) {
- ret = -EINVAL;
- goto out;
- }
+ if (val2)
+ return -EINVAL;
switch (chan->type) {
case IIO_CAPACITANCE:
+ mutex_lock(&chip->lock);
ret = ad7746_store_cap_filter_rate_setup(chip, val);
- break;
+ mutex_unlock(&chip->lock);
+ return ret;
case IIO_VOLTAGE:
+ mutex_lock(&chip->lock);
ret = ad7746_store_vt_filter_rate_setup(chip, val);
- break;
+ mutex_unlock(&chip->lock);
+ return ret;
default:
- ret = -EINVAL;
+ return -EINVAL;
}
+ default:
+ return -EINVAL;
+ }
+}
+
+static const int ad7746_v_samp_freq[] = { 50, 31, 16, 8, };
+static const int ad7746_cap_samp_freq[] = { 91, 84, 50, 26, 16, 13, 11, 9, };
+
+static int ad7746_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, const int **vals,
+ int *type, int *length, long mask)
+{
+ if (mask != IIO_CHAN_INFO_SAMP_FREQ)
+ return -EINVAL;
+
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ *vals = ad7746_v_samp_freq;
+ *length = ARRAY_SIZE(ad7746_v_samp_freq);
+ break;
+ case IIO_CAPACITANCE:
+ *vals = ad7746_cap_samp_freq;
+ *length = ARRAY_SIZE(ad7746_cap_samp_freq);
break;
default:
- ret = -EINVAL;
+ return -EINVAL;
}
+ *type = IIO_VAL_INT;
+ return IIO_AVAIL_LIST;
+}
-out:
- mutex_unlock(&chip->lock);
- return ret;
+static int ad7746_read_channel(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val)
+{
+ struct ad7746_chip_info *chip = iio_priv(indio_dev);
+ int ret, delay;
+ u8 data[3];
+ u8 regval;
+
+ ret = ad7746_select_channel(indio_dev, chan);
+ if (ret < 0)
+ return ret;
+ delay = ret;
+
+ regval = chip->config | FIELD_PREP(AD7746_CONF_MODE_MASK,
+ AD7746_CONF_MODE_SINGLE_CONV);
+ ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG, regval);
+ if (ret < 0)
+ return ret;
+
+ msleep(delay);
+ /* Now read the actual register */
+ ret = i2c_smbus_read_i2c_block_data(chip->client,
+ ad7746_chan_info[chan->address].addr,
+ sizeof(data), data);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Offset applied internally becaue the _offset userspace interface is
+ * needed for the CAP DACs which apply a controllable offset.
+ */
+ *val = get_unaligned_be24(data) - 0x800000;
+
+ return 0;
}
static int ad7746_read_raw(struct iio_dev *indio_dev,
@@ -523,55 +621,18 @@ static int ad7746_read_raw(struct iio_dev *indio_dev,
long mask)
{
struct ad7746_chip_info *chip = iio_priv(indio_dev);
- int ret, delay, idx;
- u8 regval, reg;
-
- mutex_lock(&chip->lock);
+ int ret, idx;
+ u8 reg;
switch (mask) {
case IIO_CHAN_INFO_RAW:
- case IIO_CHAN_INFO_PROCESSED:
- ret = ad7746_select_channel(indio_dev, chan);
- if (ret < 0)
- goto out;
- delay = ret;
-
- regval = chip->config | AD7746_CONF_MODE_SINGLE_CONV;
- ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_CFG,
- regval);
- if (ret < 0)
- goto out;
-
- msleep(delay);
- /* Now read the actual register */
-
- ret = i2c_smbus_read_i2c_block_data(chip->client,
- chan->address >> 8, 3,
- &chip->data.d8[1]);
-
+ mutex_lock(&chip->lock);
+ ret = ad7746_read_channel(indio_dev, chan, val);
+ mutex_unlock(&chip->lock);
if (ret < 0)
- goto out;
-
- *val = (be32_to_cpu(chip->data.d32) & 0xFFFFFF) - 0x800000;
-
- switch (chan->type) {
- case IIO_TEMP:
- /*
- * temperature in milli degrees Celsius
- * T = ((*val / 2048) - 4096) * 1000
- */
- *val = (*val * 125) / 256;
- break;
- case IIO_VOLTAGE:
- if (chan->channel == 1) /* supply_raw*/
- *val = *val * 6;
- break;
- default:
- break;
- }
+ return ret;
- ret = IIO_VAL_INT;
- break;
+ return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBSCALE:
switch (chan->type) {
case IIO_CAPACITANCE:
@@ -581,83 +642,78 @@ static int ad7746_read_raw(struct iio_dev *indio_dev,
reg = AD7746_REG_VOLT_GAINH;
break;
default:
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
+ mutex_lock(&chip->lock);
ret = i2c_smbus_read_word_swapped(chip->client, reg);
+ mutex_unlock(&chip->lock);
if (ret < 0)
- goto out;
+ return ret;
/* 1 + gain_val / 2^16 */
*val = 1;
*val2 = (15625 * ret) / 1024;
- ret = IIO_VAL_INT_PLUS_MICRO;
- break;
+ return IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_CALIBBIAS:
+ mutex_lock(&chip->lock);
ret = i2c_smbus_read_word_swapped(chip->client,
AD7746_REG_CAP_OFFH);
+ mutex_unlock(&chip->lock);
if (ret < 0)
- goto out;
+ return ret;
*val = ret;
- ret = IIO_VAL_INT;
- break;
+ return IIO_VAL_INT;
case IIO_CHAN_INFO_OFFSET:
- *val = AD7746_CAPDAC_DACP(chip->capdac[chan->channel]
- [chan->differential]) * 338646;
+ case IIO_CHAN_INFO_ZEROPOINT:
+ *val = FIELD_GET(AD7746_CAPDAC_DACP_MASK,
+ chip->capdac[chan->channel][chan->differential]) * 338646;
- ret = IIO_VAL_INT;
- break;
+ return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_CAPACITANCE:
/* 8.192pf / 2^24 */
*val = 0;
*val2 = 488;
- ret = IIO_VAL_INT_PLUS_NANO;
- break;
+ return IIO_VAL_INT_PLUS_NANO;
case IIO_VOLTAGE:
/* 1170mV / 2^23 */
*val = 1170;
+ if (chan->channel == 1)
+ *val *= 6;
*val2 = 23;
- ret = IIO_VAL_FRACTIONAL_LOG2;
- break;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ case IIO_TEMP:
+ *val = 125;
+ *val2 = 8;
+ return IIO_VAL_FRACTIONAL_LOG2;
default:
- ret = -EINVAL;
- break;
+ return -EINVAL;
}
-
- break;
case IIO_CHAN_INFO_SAMP_FREQ:
switch (chan->type) {
case IIO_CAPACITANCE:
- idx = (chip->config & AD7746_CONF_CAPFS_MASK) >>
- AD7746_CONF_CAPFS_SHIFT;
+ idx = FIELD_GET(AD7746_CONF_CAPFS_MASK, chip->config);
*val = ad7746_cap_filter_rate_table[idx][0];
- ret = IIO_VAL_INT;
- break;
+ return IIO_VAL_INT;
case IIO_VOLTAGE:
- idx = (chip->config & AD7746_CONF_VTFS_MASK) >>
- AD7746_CONF_VTFS_SHIFT;
+ idx = FIELD_GET(AD7746_CONF_VTFS_MASK, chip->config);
*val = ad7746_vt_filter_rate_table[idx][0];
- ret = IIO_VAL_INT;
- break;
+ return IIO_VAL_INT;
default:
- ret = -EINVAL;
+ return -EINVAL;
}
- break;
default:
- ret = -EINVAL;
+ return -EINVAL;
}
-out:
- mutex_unlock(&chip->lock);
- return ret;
}
static const struct iio_info ad7746_info = {
.attrs = &ad7746_attribute_group,
.read_raw = ad7746_read_raw,
+ .read_avail = ad7746_read_avail,
.write_raw = ad7746_write_raw,
};
@@ -674,10 +730,9 @@ static int ad7746_probe(struct i2c_client *client,
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
if (!indio_dev)
return -ENOMEM;
+
chip = iio_priv(indio_dev);
mutex_init(&chip->lock);
- /* this is only used for device removal purposes */
- i2c_set_clientdata(client, indio_dev);
chip->client = client;
chip->capdac_set = -1;
@@ -710,24 +765,24 @@ static int ad7746_probe(struct i2c_client *client,
if (!ret) {
switch (vdd_permille) {
case 125:
- regval |= AD7746_EXCSETUP_EXCLVL(0);
+ regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 0);
break;
case 250:
- regval |= AD7746_EXCSETUP_EXCLVL(1);
+ regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 1);
break;
case 375:
- regval |= AD7746_EXCSETUP_EXCLVL(2);
+ regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 2);
break;
case 500:
- regval |= AD7746_EXCSETUP_EXCLVL(3);
+ regval |= FIELD_PREP(AD7746_EXCSETUP_EXCLVL_MASK, 3);
break;
default:
break;
}
}
- ret = i2c_smbus_write_byte_data(chip->client,
- AD7746_REG_EXC_SETUP, regval);
+ ret = i2c_smbus_write_byte_data(chip->client, AD7746_REG_EXC_SETUP,
+ regval);
if (ret < 0)
return ret;
@@ -740,7 +795,6 @@ static const struct i2c_device_id ad7746_id[] = {
{ "ad7747", 7747 },
{}
};
-
MODULE_DEVICE_TABLE(i2c, ad7746_id);
static const struct of_device_id ad7746_of_match[] = {
@@ -749,7 +803,6 @@ static const struct of_device_id ad7746_of_match[] = {
{ .compatible = "adi,ad7747" },
{ },
};
-
MODULE_DEVICE_TABLE(of, ad7746_of_match);
static struct i2c_driver ad7746_driver = {
diff --git a/drivers/iio/common/scmi_sensors/scmi_iio.c b/drivers/iio/common/scmi_sensors/scmi_iio.c
index 793d628db55f..54ccf19ab2bb 100644
--- a/drivers/iio/common/scmi_sensors/scmi_iio.c
+++ b/drivers/iio/common/scmi_sensors/scmi_iio.c
@@ -18,6 +18,7 @@
#include <linux/scmi_protocol.h>
#include <linux/time.h>
#include <linux/types.h>
+#include <linux/units.h>
#define SCMI_IIO_NUM_OF_AXIS 3
@@ -130,7 +131,6 @@ static const struct iio_buffer_setup_ops scmi_iio_buffer_ops = {
static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2)
{
struct scmi_iio_priv *sensor = iio_priv(iio_dev);
- const unsigned long UHZ_PER_HZ = 1000000UL;
u64 sec, mult, uHz, sf;
u32 sensor_config;
char buf[32];
@@ -145,7 +145,7 @@ static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2)
return err;
}
- uHz = val * UHZ_PER_HZ + val2;
+ uHz = val * MICROHZ_PER_HZ + val2;
/*
* The seconds field in the sensor interval in SCMI is 16 bits long
@@ -156,10 +156,10 @@ static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2)
* count the number of characters
*/
sf = (u64)uHz * 0xFFFF;
- do_div(sf, UHZ_PER_HZ);
+ do_div(sf, MICROHZ_PER_HZ);
mult = scnprintf(buf, sizeof(buf), "%llu", sf) - 1;
- sec = int_pow(10, mult) * UHZ_PER_HZ;
+ sec = int_pow(10, mult) * MICROHZ_PER_HZ;
do_div(sec, uHz);
if (sec == 0) {
dev_err(&iio_dev->dev,
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 9910ba1da085..35720c64fea8 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -354,7 +354,7 @@ void st_sensors_dev_name_probe(struct device *dev, char *name, int len)
return;
/* The name from the match takes precedence if present */
- strlcpy(name, match, len);
+ strscpy(name, match, len);
}
EXPORT_SYMBOL_NS(st_sensors_dev_name_probe, IIO_ST_SENSORS);
diff --git a/drivers/iio/dac/ad5593r.c b/drivers/iio/dac/ad5593r.c
index 92be661034a6..8e5e014e0c28 100644
--- a/drivers/iio/dac/ad5593r.c
+++ b/drivers/iio/dac/ad5593r.c
@@ -13,6 +13,8 @@
#include <linux/module.h>
#include <linux/mod_devicetable.h>
+#include <asm/unaligned.h>
+
#define AD5593R_MODE_CONF (0 << 4)
#define AD5593R_MODE_DAC_WRITE (1 << 4)
#define AD5593R_MODE_ADC_READBACK (4 << 4)
@@ -20,6 +22,24 @@
#define AD5593R_MODE_GPIO_READBACK (6 << 4)
#define AD5593R_MODE_REG_READBACK (7 << 4)
+static int ad5593r_read_word(struct i2c_client *i2c, u8 reg, u16 *value)
+{
+ int ret;
+ u8 buf[2];
+
+ ret = i2c_smbus_write_byte(i2c, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_master_recv(i2c, buf, sizeof(buf));
+ if (ret < 0)
+ return ret;
+
+ *value = get_unaligned_be16(buf);
+
+ return 0;
+}
+
static int ad5593r_write_dac(struct ad5592r_state *st, unsigned chan, u16 value)
{
struct i2c_client *i2c = to_i2c_client(st->dev);
@@ -38,13 +58,7 @@ static int ad5593r_read_adc(struct ad5592r_state *st, unsigned chan, u16 *value)
if (val < 0)
return (int) val;
- val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_ADC_READBACK);
- if (val < 0)
- return (int) val;
-
- *value = (u16) val;
-
- return 0;
+ return ad5593r_read_word(i2c, AD5593R_MODE_ADC_READBACK, value);
}
static int ad5593r_reg_write(struct ad5592r_state *st, u8 reg, u16 value)
@@ -58,25 +72,19 @@ static int ad5593r_reg_write(struct ad5592r_state *st, u8 reg, u16 value)
static int ad5593r_reg_read(struct ad5592r_state *st, u8 reg, u16 *value)
{
struct i2c_client *i2c = to_i2c_client(st->dev);
- s32 val;
-
- val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_REG_READBACK | reg);
- if (val < 0)
- return (int) val;
- *value = (u16) val;
-
- return 0;
+ return ad5593r_read_word(i2c, AD5593R_MODE_REG_READBACK | reg, value);
}
static int ad5593r_gpio_read(struct ad5592r_state *st, u8 *value)
{
struct i2c_client *i2c = to_i2c_client(st->dev);
- s32 val;
+ u16 val;
+ int ret;
- val = i2c_smbus_read_word_swapped(i2c, AD5593R_MODE_GPIO_READBACK);
- if (val < 0)
- return (int) val;
+ ret = ad5593r_read_word(i2c, AD5593R_MODE_GPIO_READBACK, &val);
+ if (ret)
+ return ret;
*value = (u8) val;
@@ -94,6 +102,10 @@ static const struct ad5592r_rw_ops ad5593r_rw_ops = {
static int ad5593r_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
+ if (!i2c_check_functionality(i2c->adapter,
+ I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
+ return -EOPNOTSUPP;
+
return ad5592r_probe(&i2c->dev, id->name, &ad5593r_rw_ops);
}
diff --git a/drivers/iio/frequency/adf4371.c b/drivers/iio/frequency/adf4371.c
index 135c8cedc33d..b27088464826 100644
--- a/drivers/iio/frequency/adf4371.c
+++ b/drivers/iio/frequency/adf4371.c
@@ -540,13 +540,6 @@ static int adf4371_setup(struct adf4371_state *st)
return regmap_bulk_write(st->regmap, ADF4371_REG(0x30), st->buf, 5);
}
-static void adf4371_clk_disable(void *data)
-{
- struct adf4371_state *st = data;
-
- clk_disable_unprepare(st->clkin);
-}
-
static int adf4371_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
@@ -579,18 +572,10 @@ static int adf4371_probe(struct spi_device *spi)
indio_dev->channels = st->chip_info->channels;
indio_dev->num_channels = st->chip_info->num_channels;
- st->clkin = devm_clk_get(&spi->dev, "clkin");
+ st->clkin = devm_clk_get_enabled(&spi->dev, "clkin");
if (IS_ERR(st->clkin))
return PTR_ERR(st->clkin);
- ret = clk_prepare_enable(st->clkin);
- if (ret < 0)
- return ret;
-
- ret = devm_add_action_or_reset(&spi->dev, adf4371_clk_disable, st);
- if (ret)
- return ret;
-
st->clkin_freq = clk_get_rate(st->clkin);
ret = adf4371_setup(st);
diff --git a/drivers/iio/frequency/admv1014.c b/drivers/iio/frequency/admv1014.c
index 865addd10db4..bb5e1feef42b 100644
--- a/drivers/iio/frequency/admv1014.c
+++ b/drivers/iio/frequency/admv1014.c
@@ -669,8 +669,7 @@ static int admv1014_init(struct admv1014_state *st)
chip_id = FIELD_GET(ADMV1014_CHIP_ID_MSK, chip_id);
if (chip_id != ADMV1014_CHIP_ID) {
dev_err(&spi->dev, "Invalid Chip ID.\n");
- ret = -EINVAL;
- return ret;
+ return -EINVAL;
}
ret = __admv1014_spi_update_bits(st, ADMV1014_REG_QUAD,
diff --git a/drivers/iio/frequency/adrf6780.c b/drivers/iio/frequency/adrf6780.c
index 21878bad0909..b4defb82f37e 100644
--- a/drivers/iio/frequency/adrf6780.c
+++ b/drivers/iio/frequency/adrf6780.c
@@ -441,11 +441,6 @@ static void adrf6780_properties_parse(struct adrf6780_state *st)
st->vdet_out_en = device_property_read_bool(&spi->dev, "adi,vdet-out-en");
}
-static void adrf6780_clk_disable(void *data)
-{
- clk_disable_unprepare(data);
-}
-
static void adrf6780_powerdown(void *data)
{
/* Disable all components in the Enable Register */
@@ -473,20 +468,11 @@ static int adrf6780_probe(struct spi_device *spi)
adrf6780_properties_parse(st);
- st->clkin = devm_clk_get(&spi->dev, "lo_in");
+ st->clkin = devm_clk_get_enabled(&spi->dev, "lo_in");
if (IS_ERR(st->clkin))
return dev_err_probe(&spi->dev, PTR_ERR(st->clkin),
"failed to get the LO input clock\n");
- ret = clk_prepare_enable(st->clkin);
- if (ret)
- return ret;
-
- ret = devm_add_action_or_reset(&spi->dev, adrf6780_clk_disable,
- st->clkin);
- if (ret)
- return ret;
-
mutex_init(&st->lock);
ret = adrf6780_init(st);
diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index 001ca2c3ff95..f1d7d4b5e222 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -52,6 +52,7 @@ config ADIS16480
ADIS16485, ADIS16488 inertial sensors.
source "drivers/iio/imu/bmi160/Kconfig"
+source "drivers/iio/imu/bno055/Kconfig"
config FXOS8700
tristate
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
index c82748096c77..6eb612034722 100644
--- a/drivers/iio/imu/Makefile
+++ b/drivers/iio/imu/Makefile
@@ -15,6 +15,7 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o
obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
obj-y += bmi160/
+obj-y += bno055/
obj-$(CONFIG_FXOS8700) += fxos8700_core.o
obj-$(CONFIG_FXOS8700_I2C) += fxos8700_i2c.o
diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c
index ff2b0fab840a..aec55f7e1f26 100644
--- a/drivers/iio/imu/adis16475.c
+++ b/drivers/iio/imu/adis16475.c
@@ -1120,11 +1120,6 @@ check_burst32:
return IRQ_HANDLED;
}
-static void adis16475_disable_clk(void *data)
-{
- clk_disable_unprepare((struct clk *)data);
-}
-
static int adis16475_config_sync_mode(struct adis16475 *st)
{
int ret;
@@ -1150,19 +1145,11 @@ static int adis16475_config_sync_mode(struct adis16475 *st)
/* All the other modes require external input signal */
if (sync->sync_mode != ADIS16475_SYNC_OUTPUT) {
- struct clk *clk = devm_clk_get(dev, NULL);
+ struct clk *clk = devm_clk_get_enabled(dev, NULL);
if (IS_ERR(clk))
return PTR_ERR(clk);
- ret = clk_prepare_enable(clk);
- if (ret)
- return ret;
-
- ret = devm_add_action_or_reset(dev, adis16475_disable_clk, clk);
- if (ret)
- return ret;
-
st->clk_freq = clk_get_rate(clk);
if (st->clk_freq < sync->min_rate ||
st->clk_freq > sync->max_rate) {
diff --git a/drivers/iio/imu/bno055/Kconfig b/drivers/iio/imu/bno055/Kconfig
new file mode 100644
index 000000000000..fa79b1ac4f85
--- /dev/null
+++ b/drivers/iio/imu/bno055/Kconfig
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config BOSCH_BNO055
+ tristate
+
+config BOSCH_BNO055_SERIAL
+ tristate "Bosch BNO055 attached via UART"
+ depends on SERIAL_DEV_BUS
+ select BOSCH_BNO055
+ help
+ Enable this to support Bosch BNO055 IMUs attached via UART.
+
+ This driver can also be built as a module. If so, the module will be
+ called bno055_sl.
+
+config BOSCH_BNO055_I2C
+ tristate "Bosch BNO055 attached via I2C bus"
+ depends on I2C
+ select REGMAP_I2C
+ select BOSCH_BNO055
+ help
+ Enable this to support Bosch BNO055 IMUs attached via I2C bus.
+
+ This driver can also be built as a module. If so, the module will be
+ called bno055_i2c.
diff --git a/drivers/iio/imu/bno055/Makefile b/drivers/iio/imu/bno055/Makefile
new file mode 100644
index 000000000000..98c624730dae
--- /dev/null
+++ b/drivers/iio/imu/bno055/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_BOSCH_BNO055) += bno055.o
+obj-$(CONFIG_BOSCH_BNO055_SERIAL) += bno055_ser.o
+bno055_ser-y := bno055_ser_core.o
+# define_trace.h needs to know how to find our header
+CFLAGS_bno055_ser_trace.o := -I$(src)
+bno055_ser-$(CONFIG_TRACING) += bno055_ser_trace.o
+
+obj-$(CONFIG_BOSCH_BNO055_I2C) += bno055_i2c.o
diff --git a/drivers/iio/imu/bno055/bno055.c b/drivers/iio/imu/bno055/bno055.c
new file mode 100644
index 000000000000..307557a609e3
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055.c
@@ -0,0 +1,1685 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IIO driver for Bosch BNO055 IMU
+ *
+ * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ * Written by Andrea Merello <andrea.merello@iit.it>
+ *
+ * Portions of this driver are taken from the BNO055 driver patch
+ * from Vlad Dogaru which is Copyright (c) 2016, Intel Corporation.
+ *
+ * This driver is also based on BMI160 driver, which is:
+ * Copyright (c) 2016, Intel Corporation.
+ * Copyright (c) 2019, Martin Kelly.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitmap.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/util_macros.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include "bno055.h"
+
+#define BNO055_FW_UID_FMT "bno055-caldata-%*phN.dat"
+#define BNO055_FW_GENERIC_NAME "bno055-caldata.dat"
+
+/* common registers */
+#define BNO055_PAGESEL_REG 0x7
+
+/* page 0 registers */
+#define BNO055_CHIP_ID_REG 0x0
+#define BNO055_CHIP_ID_MAGIC 0xA0
+#define BNO055_SW_REV_LSB_REG 0x4
+#define BNO055_SW_REV_MSB_REG 0x5
+#define BNO055_ACC_DATA_X_LSB_REG 0x8
+#define BNO055_ACC_DATA_Y_LSB_REG 0xA
+#define BNO055_ACC_DATA_Z_LSB_REG 0xC
+#define BNO055_MAG_DATA_X_LSB_REG 0xE
+#define BNO055_MAG_DATA_Y_LSB_REG 0x10
+#define BNO055_MAG_DATA_Z_LSB_REG 0x12
+#define BNO055_GYR_DATA_X_LSB_REG 0x14
+#define BNO055_GYR_DATA_Y_LSB_REG 0x16
+#define BNO055_GYR_DATA_Z_LSB_REG 0x18
+#define BNO055_EUL_DATA_X_LSB_REG 0x1A
+#define BNO055_EUL_DATA_Y_LSB_REG 0x1C
+#define BNO055_EUL_DATA_Z_LSB_REG 0x1E
+#define BNO055_QUAT_DATA_W_LSB_REG 0x20
+#define BNO055_LIA_DATA_X_LSB_REG 0x28
+#define BNO055_LIA_DATA_Y_LSB_REG 0x2A
+#define BNO055_LIA_DATA_Z_LSB_REG 0x2C
+#define BNO055_GRAVITY_DATA_X_LSB_REG 0x2E
+#define BNO055_GRAVITY_DATA_Y_LSB_REG 0x30
+#define BNO055_GRAVITY_DATA_Z_LSB_REG 0x32
+#define BNO055_SCAN_CH_COUNT ((BNO055_GRAVITY_DATA_Z_LSB_REG - BNO055_ACC_DATA_X_LSB_REG) / 2)
+#define BNO055_TEMP_REG 0x34
+#define BNO055_CALIB_STAT_REG 0x35
+#define BNO055_CALIB_STAT_MAGN_SHIFT 0
+#define BNO055_CALIB_STAT_ACCEL_SHIFT 2
+#define BNO055_CALIB_STAT_GYRO_SHIFT 4
+#define BNO055_CALIB_STAT_SYS_SHIFT 6
+#define BNO055_SYS_ERR_REG 0x3A
+#define BNO055_POWER_MODE_REG 0x3E
+#define BNO055_POWER_MODE_NORMAL 0
+#define BNO055_SYS_TRIGGER_REG 0x3F
+#define BNO055_SYS_TRIGGER_RST_SYS BIT(5)
+#define BNO055_SYS_TRIGGER_CLK_SEL BIT(7)
+#define BNO055_OPR_MODE_REG 0x3D
+#define BNO055_OPR_MODE_CONFIG 0x0
+#define BNO055_OPR_MODE_AMG 0x7
+#define BNO055_OPR_MODE_FUSION_FMC_OFF 0xB
+#define BNO055_OPR_MODE_FUSION 0xC
+#define BNO055_UNIT_SEL_REG 0x3B
+/* Android orientation mode means: pitch value decreases turning clockwise */
+#define BNO055_UNIT_SEL_ANDROID BIT(7)
+#define BNO055_UNIT_SEL_GYR_RPS BIT(1)
+#define BNO055_CALDATA_START 0x55
+#define BNO055_CALDATA_END 0x6A
+#define BNO055_CALDATA_LEN 22
+
+/*
+ * The difference in address between the register that contains the
+ * value and the register that contains the offset. This applies for
+ * accel, gyro and magn channels.
+ */
+#define BNO055_REG_OFFSET_ADDR 0x4D
+
+/* page 1 registers */
+#define BNO055_PG1(x) ((x) | 0x80)
+#define BNO055_ACC_CONFIG_REG BNO055_PG1(0x8)
+#define BNO055_ACC_CONFIG_LPF_MASK GENMASK(4, 2)
+#define BNO055_ACC_CONFIG_RANGE_MASK GENMASK(1, 0)
+#define BNO055_MAG_CONFIG_REG BNO055_PG1(0x9)
+#define BNO055_MAG_CONFIG_HIGHACCURACY 0x18
+#define BNO055_MAG_CONFIG_ODR_MASK GENMASK(2, 0)
+#define BNO055_GYR_CONFIG_REG BNO055_PG1(0xA)
+#define BNO055_GYR_CONFIG_RANGE_MASK GENMASK(2, 0)
+#define BNO055_GYR_CONFIG_LPF_MASK GENMASK(5, 3)
+#define BNO055_GYR_AM_SET_REG BNO055_PG1(0x1F)
+#define BNO055_UID_LOWER_REG BNO055_PG1(0x50)
+#define BNO055_UID_HIGHER_REG BNO055_PG1(0x5F)
+#define BNO055_UID_LEN 16
+
+struct bno055_sysfs_attr {
+ int *vals;
+ int len;
+ int *fusion_vals;
+ int *hw_xlate;
+ int type;
+};
+
+static int bno055_acc_lpf_vals[] = {
+ 7, 810000, 15, 630000, 31, 250000, 62, 500000,
+ 125, 0, 250, 0, 500, 0, 1000, 0,
+};
+
+static struct bno055_sysfs_attr bno055_acc_lpf = {
+ .vals = bno055_acc_lpf_vals,
+ .len = ARRAY_SIZE(bno055_acc_lpf_vals),
+ .fusion_vals = (int[]){62, 500000},
+ .type = IIO_VAL_INT_PLUS_MICRO,
+};
+
+static int bno055_acc_range_vals[] = {
+ /* G: 2, 4, 8, 16 */
+ 1962, 3924, 7848, 15696
+};
+
+static struct bno055_sysfs_attr bno055_acc_range = {
+ .vals = bno055_acc_range_vals,
+ .len = ARRAY_SIZE(bno055_acc_range_vals),
+ .fusion_vals = (int[]){3924}, /* 4G */
+ .type = IIO_VAL_INT,
+};
+
+/*
+ * Theoretically the IMU should return data in a given (i.e. fixed) unit
+ * regardless of the range setting. This happens for the accelerometer, but not
+ * for the gyroscope; the gyroscope range setting affects the scale.
+ * This is probably due to this[0] bug.
+ * For this reason we map the internal range setting onto the standard IIO scale
+ * attribute for gyro.
+ * Since the bug[0] may be fixed in future, we check for the IMU FW version and
+ * eventually warn the user.
+ * Currently we just don't care about "range" attributes for gyro.
+ *
+ * [0] https://community.bosch-sensortec.com/t5/MEMS-sensors-forum/BNO055-Wrong-sensitivity-resolution-in-datasheet/td-p/10266
+ */
+
+/*
+ * dps = hwval * (dps_range/2^15)
+ * rps = hwval * (rps_range/2^15)
+ * = hwval * (dps_range/(2^15 * k))
+ * where k is rad-to-deg factor
+ */
+static int bno055_gyr_scale_vals[] = {
+ 125, 1877467, 250, 1877467, 500, 1877467,
+ 1000, 1877467, 2000, 1877467,
+};
+
+static struct bno055_sysfs_attr bno055_gyr_scale = {
+ .vals = bno055_gyr_scale_vals,
+ .len = ARRAY_SIZE(bno055_gyr_scale_vals),
+ .fusion_vals = (int[]){1, 900},
+ .hw_xlate = (int[]){4, 3, 2, 1, 0},
+ .type = IIO_VAL_FRACTIONAL,
+};
+
+static int bno055_gyr_lpf_vals[] = {12, 23, 32, 47, 64, 116, 230, 523};
+static struct bno055_sysfs_attr bno055_gyr_lpf = {
+ .vals = bno055_gyr_lpf_vals,
+ .len = ARRAY_SIZE(bno055_gyr_lpf_vals),
+ .fusion_vals = (int[]){32},
+ .hw_xlate = (int[]){5, 4, 7, 3, 6, 2, 1, 0},
+ .type = IIO_VAL_INT,
+};
+
+static int bno055_mag_odr_vals[] = {2, 6, 8, 10, 15, 20, 25, 30};
+static struct bno055_sysfs_attr bno055_mag_odr = {
+ .vals = bno055_mag_odr_vals,
+ .len = ARRAY_SIZE(bno055_mag_odr_vals),
+ .fusion_vals = (int[]){20},
+ .type = IIO_VAL_INT,
+};
+
+struct bno055_priv {
+ struct regmap *regmap;
+ struct device *dev;
+ struct clk *clk;
+ int operation_mode;
+ int xfer_burst_break_thr;
+ struct mutex lock;
+ u8 uid[BNO055_UID_LEN];
+ struct gpio_desc *reset_gpio;
+ bool sw_reset;
+ struct {
+ __le16 chans[BNO055_SCAN_CH_COUNT];
+ s64 timestamp __aligned(8);
+ } buf;
+ struct dentry *debugfs;
+};
+
+static bool bno055_regmap_volatile(struct device *dev, unsigned int reg)
+{
+ /* data and status registers */
+ if (reg >= BNO055_ACC_DATA_X_LSB_REG && reg <= BNO055_SYS_ERR_REG)
+ return true;
+
+ /* when in fusion mode, config is updated by chip */
+ if (reg == BNO055_MAG_CONFIG_REG ||
+ reg == BNO055_ACC_CONFIG_REG ||
+ reg == BNO055_GYR_CONFIG_REG)
+ return true;
+
+ /* calibration data may be updated by the IMU */
+ if (reg >= BNO055_CALDATA_START && reg <= BNO055_CALDATA_END)
+ return true;
+
+ return false;
+}
+
+static bool bno055_regmap_readable(struct device *dev, unsigned int reg)
+{
+ /* unnamed PG0 reserved areas */
+ if ((reg < BNO055_PG1(0) && reg > BNO055_CALDATA_END) ||
+ reg == 0x3C)
+ return false;
+
+ /* unnamed PG1 reserved areas */
+ if (reg > BNO055_PG1(BNO055_UID_HIGHER_REG) ||
+ (reg < BNO055_PG1(BNO055_UID_LOWER_REG) && reg > BNO055_PG1(BNO055_GYR_AM_SET_REG)) ||
+ reg == BNO055_PG1(0xE) ||
+ (reg < BNO055_PG1(BNO055_PAGESEL_REG) && reg >= BNO055_PG1(0x0)))
+ return false;
+ return true;
+}
+
+static bool bno055_regmap_writeable(struct device *dev, unsigned int reg)
+{
+ /*
+ * Unreadable registers are indeed reserved; there are no WO regs
+ * (except for a single bit in SYS_TRIGGER register)
+ */
+ if (!bno055_regmap_readable(dev, reg))
+ return false;
+
+ /* data and status registers */
+ if (reg >= BNO055_ACC_DATA_X_LSB_REG && reg <= BNO055_SYS_ERR_REG)
+ return false;
+
+ /* ID areas */
+ if (reg < BNO055_PAGESEL_REG ||
+ (reg <= BNO055_UID_HIGHER_REG && reg >= BNO055_UID_LOWER_REG))
+ return false;
+
+ return true;
+}
+
+static const struct regmap_range_cfg bno055_regmap_ranges[] = {
+ {
+ .range_min = 0,
+ .range_max = 0x7f * 2,
+ .selector_reg = BNO055_PAGESEL_REG,
+ .selector_mask = GENMASK(7, 0),
+ .selector_shift = 0,
+ .window_start = 0,
+ .window_len = 0x80,
+ },
+};
+
+const struct regmap_config bno055_regmap_config = {
+ .name = "bno055",
+ .reg_bits = 8,
+ .val_bits = 8,
+ .ranges = bno055_regmap_ranges,
+ .num_ranges = 1,
+ .volatile_reg = bno055_regmap_volatile,
+ .max_register = 0x80 * 2,
+ .writeable_reg = bno055_regmap_writeable,
+ .readable_reg = bno055_regmap_readable,
+ .cache_type = REGCACHE_RBTREE,
+};
+EXPORT_SYMBOL_NS_GPL(bno055_regmap_config, IIO_BNO055);
+
+/* must be called in configuration mode */
+static int bno055_calibration_load(struct bno055_priv *priv, const u8 *data, int len)
+{
+ if (len != BNO055_CALDATA_LEN) {
+ dev_dbg(priv->dev, "Invalid calibration file size %d (expected %d)",
+ len, BNO055_CALDATA_LEN);
+ return -EINVAL;
+ }
+
+ dev_dbg(priv->dev, "loading cal data: %*ph", BNO055_CALDATA_LEN, data);
+ return regmap_bulk_write(priv->regmap, BNO055_CALDATA_START,
+ data, BNO055_CALDATA_LEN);
+}
+
+static int bno055_operation_mode_do_set(struct bno055_priv *priv,
+ int operation_mode)
+{
+ int ret;
+
+ ret = regmap_write(priv->regmap, BNO055_OPR_MODE_REG,
+ operation_mode);
+ if (ret)
+ return ret;
+
+ /* Following datasheet specifications: sensor takes 7mS up to 19 mS to switch mode */
+ msleep(20);
+
+ return 0;
+}
+
+static int bno055_system_reset(struct bno055_priv *priv)
+{
+ int ret;
+
+ if (priv->reset_gpio) {
+ gpiod_set_value_cansleep(priv->reset_gpio, 0);
+ usleep_range(5000, 10000);
+ gpiod_set_value_cansleep(priv->reset_gpio, 1);
+ } else if (priv->sw_reset) {
+ ret = regmap_write(priv->regmap, BNO055_SYS_TRIGGER_REG,
+ BNO055_SYS_TRIGGER_RST_SYS);
+ if (ret)
+ return ret;
+ } else {
+ return 0;
+ }
+
+ regcache_drop_region(priv->regmap, 0x0, 0xff);
+ usleep_range(650000, 700000);
+
+ return 0;
+}
+
+static int bno055_init(struct bno055_priv *priv, const u8 *caldata, int len)
+{
+ int ret;
+
+ ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(priv->regmap, BNO055_POWER_MODE_REG,
+ BNO055_POWER_MODE_NORMAL);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(priv->regmap, BNO055_SYS_TRIGGER_REG,
+ priv->clk ? BNO055_SYS_TRIGGER_CLK_SEL : 0);
+ if (ret)
+ return ret;
+
+ /* use standard SI units */
+ ret = regmap_write(priv->regmap, BNO055_UNIT_SEL_REG,
+ BNO055_UNIT_SEL_ANDROID | BNO055_UNIT_SEL_GYR_RPS);
+ if (ret)
+ return ret;
+
+ if (caldata) {
+ ret = bno055_calibration_load(priv, caldata, len);
+ if (ret)
+ dev_warn(priv->dev, "failed to load calibration data with error %d\n",
+ ret);
+ }
+
+ return 0;
+}
+
+static ssize_t bno055_operation_mode_set(struct bno055_priv *priv,
+ int operation_mode)
+{
+ u8 caldata[BNO055_CALDATA_LEN];
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+ if (ret)
+ goto exit_unlock;
+
+ if (operation_mode == BNO055_OPR_MODE_FUSION ||
+ operation_mode == BNO055_OPR_MODE_FUSION_FMC_OFF) {
+ /* for entering fusion mode, reset the chip to clear the algo state */
+ ret = regmap_bulk_read(priv->regmap, BNO055_CALDATA_START, caldata,
+ BNO055_CALDATA_LEN);
+ if (ret)
+ goto exit_unlock;
+
+ ret = bno055_system_reset(priv);
+ if (ret)
+ goto exit_unlock;
+
+ ret = bno055_init(priv, caldata, BNO055_CALDATA_LEN);
+ if (ret)
+ goto exit_unlock;
+ }
+
+ ret = bno055_operation_mode_do_set(priv, operation_mode);
+ if (ret)
+ goto exit_unlock;
+
+ priv->operation_mode = operation_mode;
+
+exit_unlock:
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+static void bno055_uninit(void *arg)
+{
+ struct bno055_priv *priv = arg;
+
+ /* stop the IMU */
+ bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+}
+
+#define BNO055_CHANNEL(_type, _axis, _index, _address, _sep, _sh, _avail) { \
+ .address = _address, \
+ .type = _type, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##_axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | (_sep), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | (_sh), \
+ .info_mask_shared_by_type_available = _avail, \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_LE, \
+ .repeat = IIO_MOD_##_axis == IIO_MOD_QUATERNION ? 4 : 0, \
+ }, \
+}
+
+/* scan indexes follow DATA register order */
+enum bno055_scan_axis {
+ BNO055_SCAN_ACCEL_X,
+ BNO055_SCAN_ACCEL_Y,
+ BNO055_SCAN_ACCEL_Z,
+ BNO055_SCAN_MAGN_X,
+ BNO055_SCAN_MAGN_Y,
+ BNO055_SCAN_MAGN_Z,
+ BNO055_SCAN_GYRO_X,
+ BNO055_SCAN_GYRO_Y,
+ BNO055_SCAN_GYRO_Z,
+ BNO055_SCAN_YAW,
+ BNO055_SCAN_ROLL,
+ BNO055_SCAN_PITCH,
+ BNO055_SCAN_QUATERNION,
+ BNO055_SCAN_LIA_X,
+ BNO055_SCAN_LIA_Y,
+ BNO055_SCAN_LIA_Z,
+ BNO055_SCAN_GRAVITY_X,
+ BNO055_SCAN_GRAVITY_Y,
+ BNO055_SCAN_GRAVITY_Z,
+ BNO055_SCAN_TIMESTAMP,
+ _BNO055_SCAN_MAX
+};
+
+static const struct iio_chan_spec bno055_channels[] = {
+ /* accelerometer */
+ BNO055_CHANNEL(IIO_ACCEL, X, BNO055_SCAN_ACCEL_X,
+ BNO055_ACC_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+ BNO055_CHANNEL(IIO_ACCEL, Y, BNO055_SCAN_ACCEL_Y,
+ BNO055_ACC_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+ BNO055_CHANNEL(IIO_ACCEL, Z, BNO055_SCAN_ACCEL_Z,
+ BNO055_ACC_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+ /* gyroscope */
+ BNO055_CHANNEL(IIO_ANGL_VEL, X, BNO055_SCAN_GYRO_X,
+ BNO055_GYR_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |
+ BIT(IIO_CHAN_INFO_SCALE)),
+ BNO055_CHANNEL(IIO_ANGL_VEL, Y, BNO055_SCAN_GYRO_Y,
+ BNO055_GYR_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |
+ BIT(IIO_CHAN_INFO_SCALE)),
+ BNO055_CHANNEL(IIO_ANGL_VEL, Z, BNO055_SCAN_GYRO_Z,
+ BNO055_GYR_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |
+ BIT(IIO_CHAN_INFO_SCALE)),
+ /* magnetometer */
+ BNO055_CHANNEL(IIO_MAGN, X, BNO055_SCAN_MAGN_X,
+ BNO055_MAG_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+ BNO055_CHANNEL(IIO_MAGN, Y, BNO055_SCAN_MAGN_Y,
+ BNO055_MAG_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+ BNO055_CHANNEL(IIO_MAGN, Z, BNO055_SCAN_MAGN_Z,
+ BNO055_MAG_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+ /* euler angle */
+ BNO055_CHANNEL(IIO_ROT, YAW, BNO055_SCAN_YAW,
+ BNO055_EUL_DATA_X_LSB_REG, 0, 0, 0),
+ BNO055_CHANNEL(IIO_ROT, ROLL, BNO055_SCAN_ROLL,
+ BNO055_EUL_DATA_Y_LSB_REG, 0, 0, 0),
+ BNO055_CHANNEL(IIO_ROT, PITCH, BNO055_SCAN_PITCH,
+ BNO055_EUL_DATA_Z_LSB_REG, 0, 0, 0),
+ /* quaternion */
+ BNO055_CHANNEL(IIO_ROT, QUATERNION, BNO055_SCAN_QUATERNION,
+ BNO055_QUAT_DATA_W_LSB_REG, 0, 0, 0),
+
+ /* linear acceleration */
+ BNO055_CHANNEL(IIO_ACCEL, LINEAR_X, BNO055_SCAN_LIA_X,
+ BNO055_LIA_DATA_X_LSB_REG, 0, 0, 0),
+ BNO055_CHANNEL(IIO_ACCEL, LINEAR_Y, BNO055_SCAN_LIA_Y,
+ BNO055_LIA_DATA_Y_LSB_REG, 0, 0, 0),
+ BNO055_CHANNEL(IIO_ACCEL, LINEAR_Z, BNO055_SCAN_LIA_Z,
+ BNO055_LIA_DATA_Z_LSB_REG, 0, 0, 0),
+
+ /* gravity vector */
+ BNO055_CHANNEL(IIO_GRAVITY, X, BNO055_SCAN_GRAVITY_X,
+ BNO055_GRAVITY_DATA_X_LSB_REG, 0, 0, 0),
+ BNO055_CHANNEL(IIO_GRAVITY, Y, BNO055_SCAN_GRAVITY_Y,
+ BNO055_GRAVITY_DATA_Y_LSB_REG, 0, 0, 0),
+ BNO055_CHANNEL(IIO_GRAVITY, Z, BNO055_SCAN_GRAVITY_Z,
+ BNO055_GRAVITY_DATA_Z_LSB_REG, 0, 0, 0),
+
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ .scan_index = -1,
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(BNO055_SCAN_TIMESTAMP),
+};
+
+static int bno055_get_regmask(struct bno055_priv *priv, int *val, int *val2,
+ int reg, int mask, struct bno055_sysfs_attr *attr)
+{
+ const int shift = __ffs(mask);
+ int hwval, idx;
+ int ret;
+ int i;
+
+ ret = regmap_read(priv->regmap, reg, &hwval);
+ if (ret)
+ return ret;
+
+ idx = (hwval & mask) >> shift;
+ if (attr->hw_xlate)
+ for (i = 0; i < attr->len; i++)
+ if (attr->hw_xlate[i] == idx) {
+ idx = i;
+ break;
+ }
+ if (attr->type == IIO_VAL_INT) {
+ *val = attr->vals[idx];
+ } else { /* IIO_VAL_INT_PLUS_MICRO or IIO_VAL_FRACTIONAL */
+ *val = attr->vals[idx * 2];
+ *val2 = attr->vals[idx * 2 + 1];
+ }
+
+ return attr->type;
+}
+
+static int bno055_set_regmask(struct bno055_priv *priv, int val, int val2,
+ int reg, int mask, struct bno055_sysfs_attr *attr)
+{
+ const int shift = __ffs(mask);
+ int best_delta;
+ int req_val;
+ int tbl_val;
+ bool first;
+ int delta;
+ int hwval;
+ int ret;
+ int len;
+ int i;
+
+ /*
+ * The closest value the HW supports is only one in fusion mode,
+ * and it is autoselected, so don't do anything, just return OK,
+ * as the closest possible value has been (virtually) selected
+ */
+ if (priv->operation_mode != BNO055_OPR_MODE_AMG)
+ return 0;
+
+ len = attr->len;
+
+ /*
+ * We always get a request in INT_PLUS_MICRO, but we
+ * take care of the micro part only when we really have
+ * non-integer tables. This prevents 32-bit overflow with
+ * larger integers contained in integer tables.
+ */
+ req_val = val;
+ if (attr->type != IIO_VAL_INT) {
+ len /= 2;
+ req_val = min(val, 2147) * 1000000 + val2;
+ }
+
+ first = true;
+ for (i = 0; i < len; i++) {
+ switch (attr->type) {
+ case IIO_VAL_INT:
+ tbl_val = attr->vals[i];
+ break;
+ case IIO_VAL_INT_PLUS_MICRO:
+ WARN_ON(attr->vals[i * 2] > 2147);
+ tbl_val = attr->vals[i * 2] * 1000000 +
+ attr->vals[i * 2 + 1];
+ break;
+ case IIO_VAL_FRACTIONAL:
+ WARN_ON(attr->vals[i * 2] > 4294);
+ tbl_val = attr->vals[i * 2] * 1000000 /
+ attr->vals[i * 2 + 1];
+ break;
+ default:
+ return -EINVAL;
+ }
+ delta = abs(tbl_val - req_val);
+ if (delta < best_delta || first) {
+ best_delta = delta;
+ hwval = i;
+ first = false;
+ }
+ }
+
+ if (attr->hw_xlate)
+ hwval = attr->hw_xlate[hwval];
+
+ ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(priv->regmap, reg, mask, hwval << shift);
+ if (ret)
+ return ret;
+
+ return bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_AMG);
+}
+
+static int bno055_read_simple_chan(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct bno055_priv *priv = iio_priv(indio_dev);
+ __le16 raw_val;
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = regmap_bulk_read(priv->regmap, chan->address,
+ &raw_val, sizeof(raw_val));
+ if (ret < 0)
+ return ret;
+ *val = sign_extend32(le16_to_cpu(raw_val), 15);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_OFFSET:
+ if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+ *val = 0;
+ } else {
+ ret = regmap_bulk_read(priv->regmap,
+ chan->address +
+ BNO055_REG_OFFSET_ADDR,
+ &raw_val, sizeof(raw_val));
+ if (ret < 0)
+ return ret;
+ /*
+ * IMU reports sensor offsets; IIO wants correction
+ * offsets, thus we need the 'minus' here.
+ */
+ *val = -sign_extend32(le16_to_cpu(raw_val), 15);
+ }
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 1;
+ switch (chan->type) {
+ case IIO_GRAVITY:
+ /* Table 3-35: 1 m/s^2 = 100 LSB */
+ case IIO_ACCEL:
+ /* Table 3-17: 1 m/s^2 = 100 LSB */
+ *val2 = 100;
+ break;
+ case IIO_MAGN:
+ /*
+ * Table 3-19: 1 uT = 16 LSB. But we need
+ * Gauss: 1G = 0.1 uT.
+ */
+ *val2 = 160;
+ break;
+ case IIO_ANGL_VEL:
+ /*
+ * Table 3-22: 1 Rps = 900 LSB
+ * .. but this is not exactly true. See comment at the
+ * beginning of this file.
+ */
+ if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+ *val = bno055_gyr_scale.fusion_vals[0];
+ *val2 = bno055_gyr_scale.fusion_vals[1];
+ return IIO_VAL_FRACTIONAL;
+ }
+
+ return bno055_get_regmask(priv, val, val2,
+ BNO055_GYR_CONFIG_REG,
+ BNO055_GYR_CONFIG_RANGE_MASK,
+ &bno055_gyr_scale);
+ break;
+ case IIO_ROT:
+ /* Table 3-28: 1 degree = 16 LSB */
+ *val2 = 16;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return IIO_VAL_FRACTIONAL;
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ if (chan->type != IIO_MAGN)
+ return -EINVAL;
+
+ return bno055_get_regmask(priv, val, val2,
+ BNO055_MAG_CONFIG_REG,
+ BNO055_MAG_CONFIG_ODR_MASK,
+ &bno055_mag_odr);
+
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ return bno055_get_regmask(priv, val, val2,
+ BNO055_GYR_CONFIG_REG,
+ BNO055_GYR_CONFIG_LPF_MASK,
+ &bno055_gyr_lpf);
+ case IIO_ACCEL:
+ return bno055_get_regmask(priv, val, val2,
+ BNO055_ACC_CONFIG_REG,
+ BNO055_ACC_CONFIG_LPF_MASK,
+ &bno055_acc_lpf);
+ default:
+ return -EINVAL;
+ }
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bno055_sysfs_attr_avail(struct bno055_priv *priv, struct bno055_sysfs_attr *attr,
+ const int **vals, int *length)
+{
+ if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+ /* locked when fusion enabled */
+ *vals = attr->fusion_vals;
+ if (attr->type == IIO_VAL_INT)
+ *length = 1;
+ else
+ *length = 2; /* IIO_VAL_INT_PLUS_MICRO or IIO_VAL_FRACTIONAL*/
+ } else {
+ *vals = attr->vals;
+ *length = attr->len;
+ }
+
+ return attr->type;
+}
+
+static int bno055_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ struct bno055_priv *priv = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ *type = bno055_sysfs_attr_avail(priv, &bno055_gyr_scale,
+ vals, length);
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ *type = bno055_sysfs_attr_avail(priv, &bno055_gyr_lpf,
+ vals, length);
+ return IIO_AVAIL_LIST;
+ case IIO_ACCEL:
+ *type = bno055_sysfs_attr_avail(priv, &bno055_acc_lpf,
+ vals, length);
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+
+ break;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ switch (chan->type) {
+ case IIO_MAGN:
+ *type = bno055_sysfs_attr_avail(priv, &bno055_mag_odr,
+ vals, length);
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bno055_read_temp_chan(struct iio_dev *indio_dev, int *val)
+{
+ struct bno055_priv *priv = iio_priv(indio_dev);
+ unsigned int raw_val;
+ int ret;
+
+ ret = regmap_read(priv->regmap, BNO055_TEMP_REG, &raw_val);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Tables 3-36 and 3-37: one byte of priv, signed, 1 LSB = 1C.
+ * ABI wants milliC.
+ */
+ *val = raw_val * 1000;
+
+ return IIO_VAL_INT;
+}
+
+static int bno055_read_quaternion(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int size, int *vals, int *val_len,
+ long mask)
+{
+ struct bno055_priv *priv = iio_priv(indio_dev);
+ __le16 raw_vals[4];
+ int i, ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (size < 4)
+ return -EINVAL;
+ ret = regmap_bulk_read(priv->regmap,
+ BNO055_QUAT_DATA_W_LSB_REG,
+ raw_vals, sizeof(raw_vals));
+ if (ret < 0)
+ return ret;
+ for (i = 0; i < 4; i++)
+ vals[i] = sign_extend32(le16_to_cpu(raw_vals[i]), 15);
+ *val_len = 4;
+ return IIO_VAL_INT_MULTIPLE;
+ case IIO_CHAN_INFO_SCALE:
+ /* Table 3-31: 1 quaternion = 2^14 LSB */
+ if (size < 2)
+ return -EINVAL;
+ vals[0] = 1;
+ vals[1] = 14;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ default:
+ return -EINVAL;
+ }
+}
+
+static bool bno055_is_chan_readable(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan)
+{
+ struct bno055_priv *priv = iio_priv(indio_dev);
+
+ if (priv->operation_mode != BNO055_OPR_MODE_AMG)
+ return true;
+
+ switch (chan->type) {
+ case IIO_GRAVITY:
+ case IIO_ROT:
+ return false;
+ case IIO_ACCEL:
+ if (chan->channel2 == IIO_MOD_LINEAR_X ||
+ chan->channel2 == IIO_MOD_LINEAR_Y ||
+ chan->channel2 == IIO_MOD_LINEAR_Z)
+ return false;
+ return true;
+ default:
+ return true;
+ }
+}
+
+static int _bno055_read_raw_multi(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int size, int *vals, int *val_len,
+ long mask)
+{
+ if (!bno055_is_chan_readable(indio_dev, chan))
+ return -EBUSY;
+
+ switch (chan->type) {
+ case IIO_MAGN:
+ case IIO_ACCEL:
+ case IIO_ANGL_VEL:
+ case IIO_GRAVITY:
+ if (size < 2)
+ return -EINVAL;
+ *val_len = 2;
+ return bno055_read_simple_chan(indio_dev, chan,
+ &vals[0], &vals[1],
+ mask);
+ case IIO_TEMP:
+ *val_len = 1;
+ return bno055_read_temp_chan(indio_dev, &vals[0]);
+ case IIO_ROT:
+ /*
+ * Rotation is exposed as either a quaternion or three
+ * Euler angles.
+ */
+ if (chan->channel2 == IIO_MOD_QUATERNION)
+ return bno055_read_quaternion(indio_dev, chan,
+ size, vals,
+ val_len, mask);
+ if (size < 2)
+ return -EINVAL;
+ *val_len = 2;
+ return bno055_read_simple_chan(indio_dev, chan,
+ &vals[0], &vals[1],
+ mask);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bno055_read_raw_multi(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int size, int *vals, int *val_len,
+ long mask)
+{
+ struct bno055_priv *priv = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&priv->lock);
+ ret = _bno055_read_raw_multi(indio_dev, chan, size,
+ vals, val_len, mask);
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+static int _bno055_write_raw(struct iio_dev *iio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct bno055_priv *priv = iio_priv(iio_dev);
+
+ switch (chan->type) {
+ case IIO_MAGN:
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return bno055_set_regmask(priv, val, val2,
+ BNO055_MAG_CONFIG_REG,
+ BNO055_MAG_CONFIG_ODR_MASK,
+ &bno055_mag_odr);
+ default:
+ return -EINVAL;
+ }
+ case IIO_ACCEL:
+ switch (mask) {
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ return bno055_set_regmask(priv, val, val2,
+ BNO055_ACC_CONFIG_REG,
+ BNO055_ACC_CONFIG_LPF_MASK,
+ &bno055_acc_lpf);
+
+ default:
+ return -EINVAL;
+ }
+ case IIO_ANGL_VEL:
+ switch (mask) {
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ return bno055_set_regmask(priv, val, val2,
+ BNO055_GYR_CONFIG_REG,
+ BNO055_GYR_CONFIG_LPF_MASK,
+ &bno055_gyr_lpf);
+ case IIO_CHAN_INFO_SCALE:
+ return bno055_set_regmask(priv, val, val2,
+ BNO055_GYR_CONFIG_REG,
+ BNO055_GYR_CONFIG_RANGE_MASK,
+ &bno055_gyr_scale);
+ default:
+ return -EINVAL;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bno055_write_raw(struct iio_dev *iio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct bno055_priv *priv = iio_priv(iio_dev);
+ int ret;
+
+ mutex_lock(&priv->lock);
+ ret = _bno055_write_raw(iio_dev, chan, val, val2, mask);
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static ssize_t in_accel_range_raw_available_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+ int len = 0;
+ int i;
+
+ if (priv->operation_mode != BNO055_OPR_MODE_AMG)
+ return sysfs_emit(buf, "%d\n", bno055_acc_range.fusion_vals[0]);
+
+ for (i = 0; i < bno055_acc_range.len; i++)
+ len += sysfs_emit_at(buf, len, "%d ", bno055_acc_range.vals[i]);
+ buf[len - 1] = '\n';
+
+ return len;
+}
+
+static ssize_t fusion_enable_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+ return sysfs_emit(buf, "%d\n",
+ priv->operation_mode != BNO055_OPR_MODE_AMG);
+}
+
+static ssize_t fusion_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct bno055_priv *priv = iio_priv(indio_dev);
+ bool en;
+ int ret;
+
+ if (indio_dev->active_scan_mask &&
+ !bitmap_empty(indio_dev->active_scan_mask, _BNO055_SCAN_MAX))
+ return -EBUSY;
+
+ ret = kstrtobool(buf, &en);
+ if (ret)
+ return -EINVAL;
+
+ if (!en)
+ return bno055_operation_mode_set(priv, BNO055_OPR_MODE_AMG) ?: len;
+
+ /*
+ * Coming from AMG means the FMC was off, just switch to fusion but
+ * don't change anything that doesn't belong to us (i.e let FMC stay off).
+ * Coming from any other fusion mode means we don't need to do anything.
+ */
+ if (priv->operation_mode == BNO055_OPR_MODE_AMG)
+ return bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION_FMC_OFF) ?: len;
+
+ return len;
+}
+
+static ssize_t in_magn_calibration_fast_enable_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+ return sysfs_emit(buf, "%d\n",
+ priv->operation_mode == BNO055_OPR_MODE_FUSION);
+}
+
+static ssize_t in_magn_calibration_fast_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct bno055_priv *priv = iio_priv(indio_dev);
+ int ret;
+
+ if (indio_dev->active_scan_mask &&
+ !bitmap_empty(indio_dev->active_scan_mask, _BNO055_SCAN_MAX))
+ return -EBUSY;
+
+ if (sysfs_streq(buf, "0")) {
+ if (priv->operation_mode == BNO055_OPR_MODE_FUSION) {
+ ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION_FMC_OFF);
+ if (ret)
+ return ret;
+ }
+ } else {
+ if (priv->operation_mode == BNO055_OPR_MODE_AMG)
+ return -EINVAL;
+
+ if (priv->operation_mode != BNO055_OPR_MODE_FUSION) {
+ ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return len;
+}
+
+static ssize_t in_accel_range_raw_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+ int val;
+ int ret;
+
+ ret = bno055_get_regmask(priv, &val, NULL,
+ BNO055_ACC_CONFIG_REG,
+ BNO055_ACC_CONFIG_RANGE_MASK,
+ &bno055_acc_range);
+ if (ret < 0)
+ return ret;
+
+ return sysfs_emit(buf, "%d\n", val);
+}
+
+static ssize_t in_accel_range_raw_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&priv->lock);
+ ret = bno055_set_regmask(priv, val, 0,
+ BNO055_ACC_CONFIG_REG,
+ BNO055_ACC_CONFIG_RANGE_MASK,
+ &bno055_acc_range);
+ mutex_unlock(&priv->lock);
+
+ return ret ?: len;
+}
+
+static ssize_t bno055_get_calib_status(struct device *dev, char *buf, int which)
+{
+ struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+ int calib;
+ int ret;
+ int val;
+
+ if (priv->operation_mode == BNO055_OPR_MODE_AMG ||
+ (priv->operation_mode == BNO055_OPR_MODE_FUSION_FMC_OFF &&
+ which == BNO055_CALIB_STAT_MAGN_SHIFT)) {
+ calib = 0;
+ } else {
+ mutex_lock(&priv->lock);
+ ret = regmap_read(priv->regmap, BNO055_CALIB_STAT_REG, &val);
+ mutex_unlock(&priv->lock);
+
+ if (ret)
+ return -EIO;
+
+ calib = ((val >> which) & GENMASK(1, 0)) + 1;
+ }
+
+ return sysfs_emit(buf, "%d\n", calib);
+}
+
+static ssize_t serialnumber_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+ return sysfs_emit(buf, "%*ph\n", BNO055_UID_LEN, priv->uid);
+}
+
+static ssize_t calibration_data_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t pos, size_t count)
+{
+ struct bno055_priv *priv = iio_priv(dev_to_iio_dev(kobj_to_dev(kobj)));
+ u8 data[BNO055_CALDATA_LEN];
+ int ret;
+
+ /*
+ * Calibration data is volatile; reading it in chunks will possibly
+ * results in inconsistent data. We require the user to read the whole
+ * blob in a single chunk
+ */
+ if (count < BNO055_CALDATA_LEN || pos)
+ return -EINVAL;
+
+ mutex_lock(&priv->lock);
+ ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+ if (ret)
+ goto exit_unlock;
+
+ ret = regmap_bulk_read(priv->regmap, BNO055_CALDATA_START, data,
+ BNO055_CALDATA_LEN);
+ if (ret)
+ goto exit_unlock;
+
+ ret = bno055_operation_mode_do_set(priv, priv->operation_mode);
+ if (ret)
+ goto exit_unlock;
+
+ memcpy(buf, data, BNO055_CALDATA_LEN);
+
+ ret = BNO055_CALDATA_LEN;
+exit_unlock:
+ mutex_unlock(&priv->lock);
+ return ret;
+}
+
+static ssize_t sys_calibration_auto_status_show(struct device *dev,
+ struct device_attribute *a,
+ char *buf)
+{
+ return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_SYS_SHIFT);
+}
+
+static ssize_t in_accel_calibration_auto_status_show(struct device *dev,
+ struct device_attribute *a,
+ char *buf)
+{
+ return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_ACCEL_SHIFT);
+}
+
+static ssize_t in_gyro_calibration_auto_status_show(struct device *dev,
+ struct device_attribute *a,
+ char *buf)
+{
+ return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_GYRO_SHIFT);
+}
+
+static ssize_t in_magn_calibration_auto_status_show(struct device *dev,
+ struct device_attribute *a,
+ char *buf)
+{
+ return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_MAGN_SHIFT);
+}
+
+static int bno055_debugfs_reg_access(struct iio_dev *iio_dev, unsigned int reg,
+ unsigned int writeval, unsigned int *readval)
+{
+ struct bno055_priv *priv = iio_priv(iio_dev);
+
+ if (readval)
+ return regmap_read(priv->regmap, reg, readval);
+ else
+ return regmap_write(priv->regmap, reg, writeval);
+}
+
+static ssize_t bno055_show_fw_version(struct file *file, char __user *userbuf,
+ size_t count, loff_t *ppos)
+{
+ struct bno055_priv *priv = file->private_data;
+ int rev, ver;
+ char *buf;
+ int ret;
+
+ ret = regmap_read(priv->regmap, BNO055_SW_REV_LSB_REG, &rev);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(priv->regmap, BNO055_SW_REV_MSB_REG, &ver);
+ if (ret)
+ return ret;
+
+ buf = kasprintf(GFP_KERNEL, "ver: 0x%x, rev: 0x%x\n", ver, rev);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
+ kfree(buf);
+
+ return ret;
+}
+
+static const struct file_operations bno055_fw_version_ops = {
+ .open = simple_open,
+ .read = bno055_show_fw_version,
+ .llseek = default_llseek,
+ .owner = THIS_MODULE,
+};
+
+static void bno055_debugfs_remove(void *_priv)
+{
+ struct bno055_priv *priv = _priv;
+
+ debugfs_remove(priv->debugfs);
+ priv->debugfs = NULL;
+}
+
+static void bno055_debugfs_init(struct iio_dev *iio_dev)
+{
+ struct bno055_priv *priv = iio_priv(iio_dev);
+
+ priv->debugfs = debugfs_create_file("firmware_version", 0400,
+ iio_get_debugfs_dentry(iio_dev),
+ priv, &bno055_fw_version_ops);
+ if (!IS_ERR(priv->debugfs))
+ devm_add_action_or_reset(priv->dev, bno055_debugfs_remove,
+ priv);
+ if (IS_ERR_OR_NULL(priv->debugfs))
+ dev_warn(priv->dev, "failed to setup debugfs");
+}
+
+static IIO_DEVICE_ATTR_RW(fusion_enable, 0);
+static IIO_DEVICE_ATTR_RW(in_magn_calibration_fast_enable, 0);
+static IIO_DEVICE_ATTR_RW(in_accel_range_raw, 0);
+
+static IIO_DEVICE_ATTR_RO(in_accel_range_raw_available, 0);
+static IIO_DEVICE_ATTR_RO(sys_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(in_accel_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(in_gyro_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(in_magn_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(serialnumber, 0);
+
+static struct attribute *bno055_attrs[] = {
+ &iio_dev_attr_in_accel_range_raw_available.dev_attr.attr,
+ &iio_dev_attr_in_accel_range_raw.dev_attr.attr,
+ &iio_dev_attr_fusion_enable.dev_attr.attr,
+ &iio_dev_attr_in_magn_calibration_fast_enable.dev_attr.attr,
+ &iio_dev_attr_sys_calibration_auto_status.dev_attr.attr,
+ &iio_dev_attr_in_accel_calibration_auto_status.dev_attr.attr,
+ &iio_dev_attr_in_gyro_calibration_auto_status.dev_attr.attr,
+ &iio_dev_attr_in_magn_calibration_auto_status.dev_attr.attr,
+ &iio_dev_attr_serialnumber.dev_attr.attr,
+ NULL
+};
+
+static BIN_ATTR_RO(calibration_data, BNO055_CALDATA_LEN);
+
+static struct bin_attribute *bno055_bin_attrs[] = {
+ &bin_attr_calibration_data,
+ NULL
+};
+
+static const struct attribute_group bno055_attrs_group = {
+ .attrs = bno055_attrs,
+ .bin_attrs = bno055_bin_attrs,
+};
+
+static const struct iio_info bno055_info = {
+ .read_raw_multi = bno055_read_raw_multi,
+ .read_avail = bno055_read_avail,
+ .write_raw = bno055_write_raw,
+ .attrs = &bno055_attrs_group,
+ .debugfs_reg_access = bno055_debugfs_reg_access,
+};
+
+/*
+ * Reads len samples from the HW, stores them in buf starting from buf_idx,
+ * and applies mask to cull (skip) unneeded samples.
+ * Updates buf_idx incrementing with the number of stored samples.
+ * Samples from HW are transferred into buf, then in-place copy on buf is
+ * performed in order to cull samples that need to be skipped.
+ * This avoids copies of the first samples until we hit the 1st sample to skip,
+ * and also avoids having an extra bounce buffer.
+ * buf must be able to contain len elements in spite of how many samples we are
+ * going to cull.
+ */
+static int bno055_scan_xfer(struct bno055_priv *priv,
+ int start_ch, int len, unsigned long mask,
+ __le16 *buf, int *buf_idx)
+{
+ const int base = BNO055_ACC_DATA_X_LSB_REG;
+ bool quat_in_read = false;
+ int buf_base = *buf_idx;
+ __le16 *dst, *src;
+ int offs_fixup = 0;
+ int xfer_len = len;
+ int ret;
+ int i, n;
+
+ if (!mask)
+ return 0;
+
+ /*
+ * All channels are made up 1 16-bit sample, except for quaternion that
+ * is made up 4 16-bit values.
+ * For us the quaternion CH is just like 4 regular CHs.
+ * If our read starts past the quaternion make sure to adjust the
+ * starting offset; if the quaternion is contained in our scan then make
+ * sure to adjust the read len.
+ */
+ if (start_ch > BNO055_SCAN_QUATERNION) {
+ start_ch += 3;
+ } else if ((start_ch <= BNO055_SCAN_QUATERNION) &&
+ ((start_ch + len) > BNO055_SCAN_QUATERNION)) {
+ quat_in_read = true;
+ xfer_len += 3;
+ }
+
+ ret = regmap_bulk_read(priv->regmap,
+ base + start_ch * sizeof(__le16),
+ buf + buf_base,
+ xfer_len * sizeof(__le16));
+ if (ret)
+ return ret;
+
+ for_each_set_bit(i, &mask, len) {
+ if (quat_in_read && ((start_ch + i) > BNO055_SCAN_QUATERNION))
+ offs_fixup = 3;
+
+ dst = buf + *buf_idx;
+ src = buf + buf_base + offs_fixup + i;
+
+ n = (start_ch + i == BNO055_SCAN_QUATERNION) ? 4 : 1;
+
+ if (dst != src)
+ memcpy(dst, src, n * sizeof(__le16));
+
+ *buf_idx += n;
+ }
+ return 0;
+}
+
+static irqreturn_t bno055_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *iio_dev = pf->indio_dev;
+ struct bno055_priv *priv = iio_priv(iio_dev);
+ int xfer_start, start, end, prev_end;
+ unsigned long mask;
+ int quat_extra_len;
+ bool first = true;
+ int buf_idx = 0;
+ bool thr_hit;
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ /*
+ * Walk the bitmap and eventually perform several transfers.
+ * Bitmap ones-fields that are separated by gaps <= xfer_burst_break_thr
+ * will be included in same transfer.
+ * Every time the bitmap contains a gap wider than xfer_burst_break_thr
+ * then we split the transfer, skipping the gap.
+ */
+ for_each_set_bitrange(start, end, iio_dev->active_scan_mask,
+ iio_dev->masklength) {
+ /*
+ * First transfer will start from the beginning of the first
+ * ones-field in the bitmap
+ */
+ if (first) {
+ xfer_start = start;
+ } else {
+ /*
+ * We found the next ones-field; check whether to
+ * include it in * the current transfer or not (i.e.
+ * let's perform the current * transfer and prepare for
+ * another one).
+ */
+
+ /*
+ * In case the zeros-gap contains the quaternion bit,
+ * then its length is actually 4 words instead of 1
+ * (i.e. +3 wrt other channels).
+ */
+ quat_extra_len = ((start > BNO055_SCAN_QUATERNION) &&
+ (prev_end <= BNO055_SCAN_QUATERNION)) ? 3 : 0;
+
+ /* If the gap is wider than xfer_burst_break_thr then.. */
+ thr_hit = (start - prev_end + quat_extra_len) >
+ priv->xfer_burst_break_thr;
+
+ /*
+ * .. transfer all the data up to the gap. Then set the
+ * next transfer start index at right after the gap
+ * (i.e. at the start of this ones-field).
+ */
+ if (thr_hit) {
+ mask = *iio_dev->active_scan_mask >> xfer_start;
+ ret = bno055_scan_xfer(priv, xfer_start,
+ prev_end - xfer_start,
+ mask, priv->buf.chans, &buf_idx);
+ if (ret)
+ goto done;
+ xfer_start = start;
+ }
+ }
+ first = false;
+ prev_end = end;
+ }
+
+ /*
+ * We finished walking the bitmap; no more gaps to check for. Just
+ * perform the current transfer.
+ */
+ mask = *iio_dev->active_scan_mask >> xfer_start;
+ ret = bno055_scan_xfer(priv, xfer_start,
+ prev_end - xfer_start,
+ mask, priv->buf.chans, &buf_idx);
+
+ if (!ret)
+ iio_push_to_buffers_with_timestamp(iio_dev,
+ &priv->buf, pf->timestamp);
+done:
+ mutex_unlock(&priv->lock);
+ iio_trigger_notify_done(iio_dev->trig);
+ return IRQ_HANDLED;
+}
+
+static int bno055_buffer_preenable(struct iio_dev *indio_dev)
+{
+ struct bno055_priv *priv = iio_priv(indio_dev);
+ const unsigned long fusion_mask =
+ BIT(BNO055_SCAN_YAW) |
+ BIT(BNO055_SCAN_ROLL) |
+ BIT(BNO055_SCAN_PITCH) |
+ BIT(BNO055_SCAN_QUATERNION) |
+ BIT(BNO055_SCAN_LIA_X) |
+ BIT(BNO055_SCAN_LIA_Y) |
+ BIT(BNO055_SCAN_LIA_Z) |
+ BIT(BNO055_SCAN_GRAVITY_X) |
+ BIT(BNO055_SCAN_GRAVITY_Y) |
+ BIT(BNO055_SCAN_GRAVITY_Z);
+
+ if (priv->operation_mode == BNO055_OPR_MODE_AMG &&
+ bitmap_intersects(indio_dev->active_scan_mask, &fusion_mask,
+ _BNO055_SCAN_MAX))
+ return -EBUSY;
+ return 0;
+}
+
+static const struct iio_buffer_setup_ops bno055_buffer_setup_ops = {
+ .preenable = bno055_buffer_preenable,
+};
+
+int bno055_probe(struct device *dev, struct regmap *regmap,
+ int xfer_burst_break_thr, bool sw_reset)
+{
+ const struct firmware *caldata = NULL;
+ struct bno055_priv *priv;
+ struct iio_dev *iio_dev;
+ char *fw_name_buf;
+ unsigned int val;
+ int rev, ver;
+ int ret;
+
+ iio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
+ if (!iio_dev)
+ return -ENOMEM;
+
+ iio_dev->name = "bno055";
+ priv = iio_priv(iio_dev);
+ mutex_init(&priv->lock);
+ priv->regmap = regmap;
+ priv->dev = dev;
+ priv->xfer_burst_break_thr = xfer_burst_break_thr;
+ priv->sw_reset = sw_reset;
+
+ priv->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(priv->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), "Failed to get reset GPIO\n");
+
+ priv->clk = devm_clk_get_optional_enabled(dev, "clk");
+ if (IS_ERR(priv->clk))
+ return dev_err_probe(dev, PTR_ERR(priv->clk), "Failed to get CLK\n");
+
+ if (priv->reset_gpio) {
+ usleep_range(5000, 10000);
+ gpiod_set_value_cansleep(priv->reset_gpio, 1);
+ usleep_range(650000, 750000);
+ } else if (!sw_reset) {
+ dev_warn(dev, "No usable reset method; IMU may be unreliable\n");
+ }
+
+ ret = regmap_read(priv->regmap, BNO055_CHIP_ID_REG, &val);
+ if (ret)
+ return ret;
+
+ if (val != BNO055_CHIP_ID_MAGIC)
+ dev_warn(dev, "Unrecognized chip ID 0x%x\n", val);
+
+ /*
+ * In case we haven't a HW reset pin, we can still reset the chip via
+ * register write. This is probably nonsense in case we can't even
+ * communicate with the chip or the chip isn't the one we expect (i.e.
+ * we don't write to unknown chips), so we perform SW reset only after
+ * chip magic ID check
+ */
+ if (!priv->reset_gpio) {
+ ret = bno055_system_reset(priv);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_read(priv->regmap, BNO055_SW_REV_LSB_REG, &rev);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(priv->regmap, BNO055_SW_REV_MSB_REG, &ver);
+ if (ret)
+ return ret;
+
+ /*
+ * The stock FW version contains a bug (see comment at the beginning of
+ * this file) that causes the anglvel scale to be changed depending on
+ * the chip range setting. We workaround this, but we don't know what
+ * other FW versions might do.
+ */
+ if (ver != 0x3 || rev != 0x11)
+ dev_warn(dev, "Untested firmware version. Anglvel scale may not work as expected\n");
+
+ ret = regmap_bulk_read(priv->regmap, BNO055_UID_LOWER_REG,
+ priv->uid, BNO055_UID_LEN);
+ if (ret)
+ return ret;
+
+ /* Sensor calibration data */
+ fw_name_buf = kasprintf(GFP_KERNEL, BNO055_FW_UID_FMT,
+ BNO055_UID_LEN, priv->uid);
+ if (!fw_name_buf)
+ return -ENOMEM;
+
+ ret = request_firmware(&caldata, fw_name_buf, dev);
+ kfree(fw_name_buf);
+ if (ret)
+ ret = request_firmware(&caldata, BNO055_FW_GENERIC_NAME, dev);
+ if (ret) {
+ dev_notice(dev, "Calibration file load failed. See instruction in kernel Documentation/iio/bno055.rst\n");
+ ret = bno055_init(priv, NULL, 0);
+ } else {
+ ret = bno055_init(priv, caldata->data, caldata->size);
+ release_firmware(caldata);
+ }
+ if (ret)
+ return ret;
+
+ priv->operation_mode = BNO055_OPR_MODE_FUSION;
+ ret = bno055_operation_mode_do_set(priv, priv->operation_mode);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(dev, bno055_uninit, priv);
+ if (ret)
+ return ret;
+
+ iio_dev->channels = bno055_channels;
+ iio_dev->num_channels = ARRAY_SIZE(bno055_channels);
+ iio_dev->info = &bno055_info;
+ iio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = devm_iio_triggered_buffer_setup(dev, iio_dev,
+ iio_pollfunc_store_time,
+ bno055_trigger_handler,
+ &bno055_buffer_setup_ops);
+ if (ret)
+ return ret;
+
+ ret = devm_iio_device_register(dev, iio_dev);
+ if (ret)
+ return ret;
+
+ bno055_debugfs_init(iio_dev);
+
+ return 0;
+}
+EXPORT_SYMBOL_NS_GPL(bno055_probe, IIO_BNO055);
+
+MODULE_AUTHOR("Andrea Merello <andrea.merello@iit.it>");
+MODULE_DESCRIPTION("Bosch BNO055 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/bno055/bno055.h b/drivers/iio/imu/bno055/bno055.h
new file mode 100644
index 000000000000..64f9fc95cebc
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef __BNO055_H__
+#define __BNO055_H__
+
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+struct device;
+int bno055_probe(struct device *dev, struct regmap *regmap,
+ int xfer_burst_break_thr, bool sw_reset);
+extern const struct regmap_config bno055_regmap_config;
+
+#endif
diff --git a/drivers/iio/imu/bno055/bno055_i2c.c b/drivers/iio/imu/bno055/bno055_i2c.c
new file mode 100644
index 000000000000..c1bbc0fe34f9
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055_i2c.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for I2C-interfaced Bosch BNO055 IMU.
+ *
+ * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ * Written by Andrea Merello <andrea.merello@iit.it>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "bno055.h"
+
+#define BNO055_I2C_XFER_BURST_BREAK_THRESHOLD 3
+
+static int bno055_i2c_probe(struct i2c_client *client)
+{
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_i2c(client, &bno055_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(&client->dev, PTR_ERR(regmap),
+ "Unable to init register map");
+
+ return bno055_probe(&client->dev, regmap,
+ BNO055_I2C_XFER_BURST_BREAK_THRESHOLD, true);
+}
+
+static const struct i2c_device_id bno055_i2c_id[] = {
+ {"bno055", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, bno055_i2c_id);
+
+static const struct of_device_id __maybe_unused bno055_i2c_of_match[] = {
+ { .compatible = "bosch,bno055" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bno055_i2c_of_match);
+
+static struct i2c_driver bno055_driver = {
+ .driver = {
+ .name = "bno055-i2c",
+ .of_match_table = bno055_i2c_of_match,
+ },
+ .probe_new = bno055_i2c_probe,
+ .id_table = bno055_i2c_id,
+};
+module_i2c_driver(bno055_driver);
+
+MODULE_AUTHOR("Andrea Merello");
+MODULE_DESCRIPTION("Bosch BNO055 I2C interface");
+MODULE_IMPORT_NS(IIO_BNO055);
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/bno055/bno055_ser_core.c b/drivers/iio/imu/bno055/bno055_ser_core.c
new file mode 100644
index 000000000000..57728a568471
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055_ser_core.c
@@ -0,0 +1,560 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Serial line interface for Bosh BNO055 IMU (via serdev).
+ * This file implements serial communication up to the register read/write
+ * level.
+ *
+ * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ * Written by Andrea Merello <andrea.merello@iit.it>
+ *
+ * This driver is based on
+ * Plantower PMS7003 particulate matter sensor driver
+ * Which is
+ * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com>
+ */
+
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/serdev.h>
+
+#include "bno055_ser_trace.h"
+#include "bno055.h"
+
+/*
+ * Register writes cmd have the following format
+ * +------+------+-----+-----+----- ... ----+
+ * | 0xAA | 0xOO | REG | LEN | payload[LEN] |
+ * +------+------+-----+-----+----- ... ----+
+ *
+ * Register write responses have the following format
+ * +------+----------+
+ * | 0xEE | ERROCODE |
+ * +------+----------+
+ *
+ * .. except when writing the SYS_RST bit (i.e. triggering a system reset); in
+ * case the IMU accepts the command, then it resets without responding. We don't
+ * handle this (yet) here (so we inform the common bno055 code not to perform
+ * sw resets - bno055 on serial bus basically requires the hw reset pin).
+ *
+ * Register read have the following format
+ * +------+------+-----+-----+
+ * | 0xAA | 0xO1 | REG | LEN |
+ * +------+------+-----+-----+
+ *
+ * Successful register read response have the following format
+ * +------+-----+----- ... ----+
+ * | 0xBB | LEN | payload[LEN] |
+ * +------+-----+----- ... ----+
+ *
+ * Failed register read response have the following format
+ * +------+--------+
+ * | 0xEE | ERRCODE| (ERRCODE always > 1)
+ * +------+--------+
+ *
+ * Error codes are
+ * 01: OK
+ * 02: read/write FAIL
+ * 04: invalid address
+ * 05: write on RO
+ * 06: wrong start byte
+ * 07: bus overrun
+ * 08: len too high
+ * 09: len too low
+ * 10: bus RX byte timeout (timeout is 30mS)
+ *
+ *
+ * **WORKAROUND ALERT**
+ *
+ * Serial communication seems very fragile: the BNO055 buffer seems to overflow
+ * very easy; BNO055 seems able to sink few bytes, then it needs a brief pause.
+ * On the other hand, it is also picky on timeout: if there is a pause > 30mS in
+ * between two bytes then the transaction fails (IMU internal RX FSM resets).
+ *
+ * BNO055 has been seen also failing to process commands in case we send them
+ * too close each other (or if it is somehow busy?)
+ *
+ * In particular I saw these scenarios:
+ * 1) If we send 2 bytes per time, then the IMU never(?) overflows.
+ * 2) If we send 4 bytes per time (i.e. the full header), then the IMU could
+ * overflow, but it seem to sink all 4 bytes, then it returns error.
+ * 3) If we send more than 4 bytes, the IMU could overflow, and I saw it sending
+ * error after 4 bytes are sent; we have troubles in synchronizing again,
+ * because we are still sending data, and the IMU interprets it as the 1st
+ * byte of a new command.
+ *
+ * While we must avoid case 3, we could send 4 bytes per time and eventually
+ * retry in case of failure; this seemed convenient for reads (which requires
+ * TXing exactly 4 bytes), however it has been seen that, depending by the IMU
+ * settings (e.g. LPF), failures became less or more frequent; in certain IMU
+ * configurations they are very rare, but in certain others we keeps failing
+ * even after like 30 retries.
+ *
+ * So, we just split TXes in [2-bytes + delay] steps, and still keep an eye on
+ * the IMU response; in case it overflows (which is now unlikely), we retry.
+ */
+
+/*
+ * Read operation overhead:
+ * 4 bytes req + 2byte resp hdr.
+ * 6 bytes = 60 bit (considering 1start + 1stop bits).
+ * 60/115200 = ~520uS + about 2500mS delay -> ~3mS
+ * In 3mS we could read back about 34 bytes that means 17 samples, this means
+ * that in case of scattered reads in which the gap is 17 samples or less it is
+ * still convenient to go for a burst.
+ * We have to take into account also IMU response time - IMU seems to be often
+ * reasonably quick to respond, but sometimes it seems to be in some "critical
+ * section" in which it delays handling of serial protocol. Because of this we
+ * round-up to 22, which is the max number of samples, always bursting indeed.
+ */
+#define BNO055_SER_XFER_BURST_BREAK_THRESHOLD 22
+
+struct bno055_ser_priv {
+ enum {
+ CMD_NONE,
+ CMD_READ,
+ CMD_WRITE,
+ } expect_response;
+ int expected_data_len;
+ u8 *response_buf;
+
+ /**
+ * enum cmd_status - represent the status of a command sent to the HW.
+ * @STATUS_CRIT: The command failed: the serial communication failed.
+ * @STATUS_OK: The command executed successfully.
+ * @STATUS_FAIL: The command failed: HW responded with an error.
+ */
+ enum {
+ STATUS_CRIT = -1,
+ STATUS_OK = 0,
+ STATUS_FAIL = 1,
+ } cmd_status;
+
+ /*
+ * Protects all the above fields, which are accessed in behalf of both
+ * the serdev RX callback and the regmap side
+ */
+ struct mutex lock;
+
+ /* Only accessed in serdev RX callback context*/
+ struct {
+ enum {
+ RX_IDLE,
+ RX_START,
+ RX_DATA,
+ } state;
+ int databuf_count;
+ int expected_len;
+ int type;
+ } rx;
+
+ /* Never accessed in behalf of serdev RX callback context */
+ bool cmd_stale;
+
+ struct completion cmd_complete;
+ struct serdev_device *serdev;
+};
+
+static int bno055_ser_send_chunk(struct bno055_ser_priv *priv, const u8 *data, int len)
+{
+ int ret;
+
+ trace_send_chunk(len, data);
+ ret = serdev_device_write(priv->serdev, data, len, msecs_to_jiffies(25));
+ if (ret < 0)
+ return ret;
+
+ if (ret < len)
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * Send a read or write command.
+ * 'data' can be NULL (used in read case). 'len' parameter is always valid; in
+ * case 'data' is non-NULL then it must match 'data' size.
+ */
+static int bno055_ser_do_send_cmd(struct bno055_ser_priv *priv,
+ bool read, int addr, int len, const u8 *data)
+{
+ u8 hdr[] = {0xAA, read, addr, len};
+ int chunk_len;
+ int ret;
+
+ ret = bno055_ser_send_chunk(priv, hdr, 2);
+ if (ret)
+ goto fail;
+ usleep_range(2000, 3000);
+ ret = bno055_ser_send_chunk(priv, hdr + 2, 2);
+ if (ret)
+ goto fail;
+
+ if (read)
+ return 0;
+
+ while (len) {
+ chunk_len = min(len, 2);
+ usleep_range(2000, 3000);
+ ret = bno055_ser_send_chunk(priv, data, chunk_len);
+ if (ret)
+ goto fail;
+ data += chunk_len;
+ len -= chunk_len;
+ }
+
+ return 0;
+fail:
+ /* waiting more than 30mS should clear the BNO055 internal state */
+ usleep_range(40000, 50000);
+ return ret;
+}
+
+static int bno055_ser_send_cmd(struct bno055_ser_priv *priv,
+ bool read, int addr, int len, const u8 *data)
+{
+ const int retry_max = 5;
+ int retry = retry_max;
+ int ret = 0;
+
+ /*
+ * In case previous command was interrupted we still need to wait it to
+ * complete before we can issue new commands
+ */
+ if (priv->cmd_stale) {
+ ret = wait_for_completion_interruptible_timeout(&priv->cmd_complete,
+ msecs_to_jiffies(100));
+ if (ret == -ERESTARTSYS)
+ return -ERESTARTSYS;
+
+ priv->cmd_stale = false;
+ /* if serial protocol broke, bail out */
+ if (priv->cmd_status == STATUS_CRIT)
+ return -EIO;
+ }
+
+ /*
+ * Try to convince the IMU to cooperate.. as explained in the comments
+ * at the top of this file, the IMU could also refuse the command (i.e.
+ * it is not ready yet); retry in this case.
+ */
+ do {
+ mutex_lock(&priv->lock);
+ priv->expect_response = read ? CMD_READ : CMD_WRITE;
+ reinit_completion(&priv->cmd_complete);
+ mutex_unlock(&priv->lock);
+
+ if (retry != retry_max)
+ trace_cmd_retry(read, addr, retry_max - retry);
+ ret = bno055_ser_do_send_cmd(priv, read, addr, len, data);
+ if (ret)
+ continue;
+
+ ret = wait_for_completion_interruptible_timeout(&priv->cmd_complete,
+ msecs_to_jiffies(100));
+ if (ret == -ERESTARTSYS) {
+ priv->cmd_stale = true;
+ return -ERESTARTSYS;
+ }
+
+ if (!ret)
+ return -ETIMEDOUT;
+
+ if (priv->cmd_status == STATUS_OK)
+ return 0;
+ if (priv->cmd_status == STATUS_CRIT)
+ return -EIO;
+
+ /* loop in case priv->cmd_status == STATUS_FAIL */
+ } while (--retry);
+
+ if (ret < 0)
+ return ret;
+ if (priv->cmd_status == STATUS_FAIL)
+ return -EINVAL;
+ return 0;
+}
+
+static int bno055_ser_write_reg(void *context, const void *_data, size_t count)
+{
+ const u8 *data = _data;
+ struct bno055_ser_priv *priv = context;
+
+ if (count < 2) {
+ dev_err(&priv->serdev->dev, "Invalid write count %zu", count);
+ return -EINVAL;
+ }
+
+ trace_write_reg(data[0], data[1]);
+ return bno055_ser_send_cmd(priv, 0, data[0], count - 1, data + 1);
+}
+
+static int bno055_ser_read_reg(void *context,
+ const void *_reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ int ret;
+ int reg_addr;
+ const u8 *reg = _reg;
+ struct bno055_ser_priv *priv = context;
+
+ if (val_size > 128) {
+ dev_err(&priv->serdev->dev, "Invalid read valsize %zu", val_size);
+ return -EINVAL;
+ }
+
+ reg_addr = *reg;
+ trace_read_reg(reg_addr, val_size);
+ mutex_lock(&priv->lock);
+ priv->expected_data_len = val_size;
+ priv->response_buf = val;
+ mutex_unlock(&priv->lock);
+
+ ret = bno055_ser_send_cmd(priv, 1, reg_addr, val_size, NULL);
+
+ mutex_lock(&priv->lock);
+ priv->response_buf = NULL;
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+/*
+ * Handler for received data; this is called from the receiver callback whenever
+ * it got some packet from the serial bus. The status tells us whether the
+ * packet is valid (i.e. header ok && received payload len consistent wrt the
+ * header). It's now our responsibility to check whether this is what we
+ * expected, of whether we got some unexpected, yet valid, packet.
+ */
+static void bno055_ser_handle_rx(struct bno055_ser_priv *priv, int status)
+{
+ mutex_lock(&priv->lock);
+ switch (priv->expect_response) {
+ case CMD_NONE:
+ dev_warn(&priv->serdev->dev, "received unexpected, yet valid, data from sensor");
+ mutex_unlock(&priv->lock);
+ return;
+
+ case CMD_READ:
+ priv->cmd_status = status;
+ if (status == STATUS_OK &&
+ priv->rx.databuf_count != priv->expected_data_len) {
+ /*
+ * If we got here, then the lower layer serial protocol
+ * seems consistent with itself; if we got an unexpected
+ * amount of data then signal it as a non critical error
+ */
+ priv->cmd_status = STATUS_FAIL;
+ dev_warn(&priv->serdev->dev,
+ "received an unexpected amount of, yet valid, data from sensor");
+ }
+ break;
+
+ case CMD_WRITE:
+ priv->cmd_status = status;
+ break;
+ }
+
+ priv->expect_response = CMD_NONE;
+ mutex_unlock(&priv->lock);
+ complete(&priv->cmd_complete);
+}
+
+/*
+ * Serdev receiver FSM. This tracks the serial communication and parse the
+ * header. It pushes packets to bno055_ser_handle_rx(), eventually communicating
+ * failures (i.e. malformed packets).
+ * Ideally it doesn't know anything about upper layer (i.e. if this is the
+ * packet we were really expecting), but since we copies the payload into the
+ * receiver buffer (that is not valid when i.e. we don't expect data), we
+ * snoop a bit in the upper layer..
+ * Also, we assume to RX one pkt per time (i.e. the HW doesn't send anything
+ * unless we require to AND we don't queue more than one request per time).
+ */
+static int bno055_ser_receive_buf(struct serdev_device *serdev,
+ const unsigned char *buf, size_t size)
+{
+ int status;
+ struct bno055_ser_priv *priv = serdev_device_get_drvdata(serdev);
+ int remaining = size;
+
+ if (size == 0)
+ return 0;
+
+ trace_recv(size, buf);
+ switch (priv->rx.state) {
+ case RX_IDLE:
+ /*
+ * New packet.
+ * Check for its 1st byte that identifies the pkt type.
+ */
+ if (buf[0] != 0xEE && buf[0] != 0xBB) {
+ dev_err(&priv->serdev->dev,
+ "Invalid packet start %x", buf[0]);
+ bno055_ser_handle_rx(priv, STATUS_CRIT);
+ break;
+ }
+ priv->rx.type = buf[0];
+ priv->rx.state = RX_START;
+ remaining--;
+ buf++;
+ priv->rx.databuf_count = 0;
+ fallthrough;
+
+ case RX_START:
+ /*
+ * Packet RX in progress, we expect either 1-byte len or 1-byte
+ * status depending by the packet type.
+ */
+ if (remaining == 0)
+ break;
+
+ if (priv->rx.type == 0xEE) {
+ if (remaining > 1) {
+ dev_err(&priv->serdev->dev, "EE pkt. Extra data received");
+ status = STATUS_CRIT;
+ } else {
+ status = (buf[0] == 1) ? STATUS_OK : STATUS_FAIL;
+ }
+ bno055_ser_handle_rx(priv, status);
+ priv->rx.state = RX_IDLE;
+ break;
+
+ } else {
+ /*priv->rx.type == 0xBB */
+ priv->rx.state = RX_DATA;
+ priv->rx.expected_len = buf[0];
+ remaining--;
+ buf++;
+ }
+ fallthrough;
+
+ case RX_DATA:
+ /* Header parsed; now receiving packet data payload */
+ if (remaining == 0)
+ break;
+
+ if (priv->rx.databuf_count + remaining > priv->rx.expected_len) {
+ /*
+ * This is an inconsistency in serial protocol, we lost
+ * sync and we don't know how to handle further data
+ */
+ dev_err(&priv->serdev->dev, "BB pkt. Extra data received");
+ bno055_ser_handle_rx(priv, STATUS_CRIT);
+ priv->rx.state = RX_IDLE;
+ break;
+ }
+
+ mutex_lock(&priv->lock);
+ /*
+ * NULL e.g. when read cmd is stale or when no read cmd is
+ * actually pending.
+ */
+ if (priv->response_buf &&
+ /*
+ * Snoop on the upper layer protocol stuff to make sure not
+ * to write to an invalid memory. Apart for this, let's the
+ * upper layer manage any inconsistency wrt expected data
+ * len (as long as the serial protocol is consistent wrt
+ * itself (i.e. response header is consistent with received
+ * response len.
+ */
+ (priv->rx.databuf_count + remaining <= priv->expected_data_len))
+ memcpy(priv->response_buf + priv->rx.databuf_count,
+ buf, remaining);
+ mutex_unlock(&priv->lock);
+
+ priv->rx.databuf_count += remaining;
+
+ /*
+ * Reached expected len advertised by the IMU for the current
+ * packet. Pass it to the upper layer (for us it is just valid).
+ */
+ if (priv->rx.databuf_count == priv->rx.expected_len) {
+ bno055_ser_handle_rx(priv, STATUS_OK);
+ priv->rx.state = RX_IDLE;
+ }
+ break;
+ }
+
+ return size;
+}
+
+static const struct serdev_device_ops bno055_ser_serdev_ops = {
+ .receive_buf = bno055_ser_receive_buf,
+ .write_wakeup = serdev_device_write_wakeup,
+};
+
+static struct regmap_bus bno055_ser_regmap_bus = {
+ .write = bno055_ser_write_reg,
+ .read = bno055_ser_read_reg,
+};
+
+static int bno055_ser_probe(struct serdev_device *serdev)
+{
+ struct bno055_ser_priv *priv;
+ struct regmap *regmap;
+ int ret;
+
+ priv = devm_kzalloc(&serdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ serdev_device_set_drvdata(serdev, priv);
+ priv->serdev = serdev;
+ mutex_init(&priv->lock);
+ init_completion(&priv->cmd_complete);
+
+ serdev_device_set_client_ops(serdev, &bno055_ser_serdev_ops);
+ ret = devm_serdev_device_open(&serdev->dev, serdev);
+ if (ret)
+ return ret;
+
+ if (serdev_device_set_baudrate(serdev, 115200) != 115200) {
+ dev_err(&serdev->dev, "Cannot set required baud rate");
+ return -EIO;
+ }
+
+ ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
+ if (ret) {
+ dev_err(&serdev->dev, "Cannot set required parity setting");
+ return ret;
+ }
+ serdev_device_set_flow_control(serdev, false);
+
+ regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus,
+ priv, &bno055_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(&serdev->dev, PTR_ERR(regmap),
+ "Unable to init register map");
+
+ return bno055_probe(&serdev->dev, regmap,
+ BNO055_SER_XFER_BURST_BREAK_THRESHOLD, false);
+}
+
+static const struct of_device_id bno055_ser_of_match[] = {
+ { .compatible = "bosch,bno055" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bno055_ser_of_match);
+
+static struct serdev_device_driver bno055_ser_driver = {
+ .driver = {
+ .name = "bno055-ser",
+ .of_match_table = bno055_ser_of_match,
+ },
+ .probe = bno055_ser_probe,
+};
+module_serdev_device_driver(bno055_ser_driver);
+
+MODULE_AUTHOR("Andrea Merello <andrea.merello@iit.it>");
+MODULE_DESCRIPTION("Bosch BNO055 serdev interface");
+MODULE_IMPORT_NS(IIO_BNO055);
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/bno055/bno055_ser_trace.c b/drivers/iio/imu/bno055/bno055_ser_trace.c
new file mode 100644
index 000000000000..48397b66daef
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055_ser_trace.c
@@ -0,0 +1,14 @@
+//SPDX-License-Identifier: GPL-2.0
+
+/*
+ * bno055_ser Trace Support
+ * Copyright (C) 2022 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ *
+ * Based on:
+ * Device core Trace Support
+ * Copyright (C) 2021, Intel Corporation
+ */
+
+#define CREATE_TRACE_POINTS
+#include "bno055_ser_trace.h"
diff --git a/drivers/iio/imu/bno055/bno055_ser_trace.h b/drivers/iio/imu/bno055/bno055_ser_trace.h
new file mode 100644
index 000000000000..7d9eae166eec
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055_ser_trace.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#if !defined(__BNO055_SERDEV_TRACE_H__) || defined(TRACE_HEADER_MULTI_READ)
+#define __BNO055_SERDEV_TRACE_H__
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM bno055_ser
+
+TRACE_EVENT(send_chunk,
+ TP_PROTO(int len, const u8 *data),
+ TP_ARGS(len, data),
+ TP_STRUCT__entry(
+ __field(int, len)
+ __dynamic_array(u8, chunk, len)
+ ),
+ TP_fast_assign(
+ __entry->len = len;
+ memcpy(__get_dynamic_array(chunk),
+ data, __entry->len);
+ ),
+ TP_printk("len: %d, data: = %*ph",
+ __entry->len, __entry->len, __get_dynamic_array(chunk)
+ )
+);
+
+TRACE_EVENT(cmd_retry,
+ TP_PROTO(bool read, int addr, int retry),
+ TP_ARGS(read, addr, retry),
+ TP_STRUCT__entry(
+ __field(bool, read)
+ __field(int, addr)
+ __field(int, retry)
+ ),
+ TP_fast_assign(
+ __entry->read = read;
+ __entry->addr = addr;
+ __entry->retry = retry;
+ ),
+ TP_printk("%s addr 0x%x retry #%d",
+ __entry->read ? "read" : "write",
+ __entry->addr, __entry->retry
+ )
+);
+
+TRACE_EVENT(write_reg,
+ TP_PROTO(u8 addr, u8 value),
+ TP_ARGS(addr, value),
+ TP_STRUCT__entry(
+ __field(u8, addr)
+ __field(u8, value)
+ ),
+ TP_fast_assign(
+ __entry->addr = addr;
+ __entry->value = value;
+ ),
+ TP_printk("reg 0x%x = 0x%x",
+ __entry->addr, __entry->value
+ )
+);
+
+TRACE_EVENT(read_reg,
+ TP_PROTO(int addr, size_t len),
+ TP_ARGS(addr, len),
+ TP_STRUCT__entry(
+ __field(int, addr)
+ __field(size_t, len)
+ ),
+ TP_fast_assign(
+ __entry->addr = addr;
+ __entry->len = len;
+ ),
+ TP_printk("reg 0x%x (len %zu)",
+ __entry->addr, __entry->len
+ )
+);
+
+TRACE_EVENT(recv,
+ TP_PROTO(size_t len, const unsigned char *buf),
+ TP_ARGS(len, buf),
+ TP_STRUCT__entry(
+ __field(size_t, len)
+ __dynamic_array(unsigned char, buf, len)
+ ),
+ TP_fast_assign(
+ __entry->len = len;
+ memcpy(__get_dynamic_array(buf),
+ buf, __entry->len);
+ ),
+ TP_printk("len: %zu, data: = %*ph",
+ __entry->len, (int)__entry->len, __get_dynamic_array(buf)
+ )
+);
+
+#endif /* __BNO055_SERDEV_TRACE_H__ || TRACE_HEADER_MULTI_READ */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE bno055_ser_trace
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
index 9b4298095d3f..f7bce428d9eb 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
@@ -65,7 +65,7 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev,
sub_elem = &elem->package.elements[j];
if (sub_elem->type == ACPI_TYPE_STRING)
- strlcpy(info->type, sub_elem->string.pointer,
+ strscpy(info->type, sub_elem->string.pointer,
sizeof(info->type));
else if (sub_elem->type == ACPI_TYPE_INTEGER) {
if (sub_elem->integer.value != client->addr) {
@@ -158,7 +158,7 @@ int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
char *name;
info.addr = secondary;
- strlcpy(info.type, dev_name(&adev->dev),
+ strscpy(info.type, dev_name(&adev->dev),
sizeof(info.type));
name = strchr(info.type, ':');
if (name)
diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index fefd0b939100..2ed2b3f40c0b 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -12,7 +12,7 @@ config IIO_ST_LSM6DSX
Say yes here to build support for STMicroelectronics LSM6DSx imu
sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
ism330dlc, lsm6dso, lsm6dsox, asm330lhh, asm330lhhx, lsm6dsr,
- lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop,
+ lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop, lsm6dstx,
the accelerometer/gyroscope of lsm9ds1 and lsm6dst.
To compile this driver as a module, choose M here: the module
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index a86dd29a4738..6b57d47be69e 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -32,6 +32,7 @@
#define ST_LSM6DST_DEV_NAME "lsm6dst"
#define ST_LSM6DSOP_DEV_NAME "lsm6dsop"
#define ST_ASM330LHHX_DEV_NAME "asm330lhhx"
+#define ST_LSM6DSTX_DEV_NAME "lsm6dstx"
enum st_lsm6dsx_hw_id {
ST_LSM6DS3_ID,
@@ -51,6 +52,7 @@ enum st_lsm6dsx_hw_id {
ST_LSM6DST_ID,
ST_LSM6DSOP_ID,
ST_ASM330LHHX_ID,
+ ST_LSM6DSTX_ID,
ST_LSM6DSX_MAX_ID,
};
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index c7d3730ab1c5..e49f2d120ed3 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -15,7 +15,7 @@
* value of the decimation factor and ODR set for each FIFO data set.
*
* LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/LSM6DSRX/ISM330DHCX/
- * LSM6DST/LSM6DSOP:
+ * LSM6DST/LSM6DSOP/LSM6DSTX:
* The FIFO buffer can be configured to store data from gyroscope and
* accelerometer. Each sample is queued with a tag (1B) indicating data
* source (gyroscope, accelerometer, hw timer).
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index b5e4a4113652..f8bbb005718e 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -26,7 +26,8 @@
* - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
* - FIFO size: 4KB
*
- * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP:
+ * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP/
+ * LSM6DSTX:
* - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416,
* 833
* - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
@@ -791,6 +792,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.hw_id = ST_ASM330LHHX_ID,
.name = ST_ASM330LHHX_DEV_NAME,
.wai = 0x6b,
+ }, {
+ .hw_id = ST_LSM6DSTX_ID,
+ .name = ST_LSM6DSTX_DEV_NAME,
+ .wai = 0x6d,
},
},
.channels = {
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index 2ea34c0d3a8c..307c8c436862 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -105,6 +105,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
.compatible = "st,asm330lhhx",
.data = (void *)ST_ASM330LHHX_ID,
},
+ {
+ .compatible = "st,lsm6dstx",
+ .data = (void *)ST_LSM6DSTX_ID,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
@@ -127,6 +131,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
{ ST_LSM6DST_DEV_NAME, ST_LSM6DST_ID },
{ ST_LSM6DSOP_DEV_NAME, ST_LSM6DSOP_ID },
{ ST_ASM330LHHX_DEV_NAME, ST_ASM330LHHX_ID },
+ { ST_LSM6DSTX_DEV_NAME, ST_LSM6DSTX_ID },
{},
};
MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
index 6a8883f022a8..6a4eecf4bb05 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -105,6 +105,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
.compatible = "st,asm330lhhx",
.data = (void *)ST_ASM330LHHX_ID,
},
+ {
+ .compatible = "st,lsm6dstx",
+ .data = (void *)ST_LSM6DSTX_ID,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
@@ -127,6 +131,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
{ ST_LSM6DST_DEV_NAME, ST_LSM6DST_ID },
{ ST_LSM6DSOP_DEV_NAME, ST_LSM6DSOP_ID },
{ ST_ASM330LHHX_DEV_NAME, ST_ASM330LHHX_ID },
+ { ST_LSM6DSTX_DEV_NAME, ST_LSM6DSTX_ID },
{},
};
MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index acc2b6c05d57..228598b82a2f 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -843,8 +843,8 @@ static int iio_verify_update(struct iio_dev *indio_dev,
* to verify.
*/
if (remove_buffer && !insert_buffer &&
- list_is_singular(&iio_dev_opaque->buffer_list))
- return 0;
+ list_is_singular(&iio_dev_opaque->buffer_list))
+ return 0;
modes = indio_dev->modes;
@@ -940,6 +940,7 @@ struct iio_demux_table {
static void iio_buffer_demux_free(struct iio_buffer *buffer)
{
struct iio_demux_table *p, *q;
+
list_for_each_entry_safe(p, q, &buffer->demux_list, l) {
list_del(&p->l);
kfree(p);
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index 0f4dbda3b9d3..151ff3993354 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -134,6 +134,12 @@ static const char * const iio_modifier_names[] = {
[IIO_MOD_ETHANOL] = "ethanol",
[IIO_MOD_H2] = "h2",
[IIO_MOD_O2] = "o2",
+ [IIO_MOD_LINEAR_X] = "linear_x",
+ [IIO_MOD_LINEAR_Y] = "linear_y",
+ [IIO_MOD_LINEAR_Z] = "linear_z",
+ [IIO_MOD_PITCH] = "pitch",
+ [IIO_MOD_YAW] = "yaw",
+ [IIO_MOD_ROLL] = "roll",
};
/* relies on pairs of these shared then separate */
@@ -168,6 +174,7 @@ static const char * const iio_chan_info_postfix[] = {
[IIO_CHAN_INFO_OVERSAMPLING_RATIO] = "oversampling_ratio",
[IIO_CHAN_INFO_THERMOCOUPLE_TYPE] = "thermocouple_type",
[IIO_CHAN_INFO_CALIBAMBIENT] = "calibambient",
+ [IIO_CHAN_INFO_ZEROPOINT] = "zeropoint",
};
/**
* iio_device_id() - query the unique ID for the device
@@ -236,6 +243,7 @@ static int iio_sysfs_match_string_with_gaps(const char * const *array, size_t n,
struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev)
{
struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
+
return iio_dev_opaque->debugfs_dentry;
}
EXPORT_SYMBOL_GPL(iio_get_debugfs_dentry);
@@ -447,6 +455,7 @@ static const struct file_operations iio_debugfs_reg_fops = {
static void iio_device_unregister_debugfs(struct iio_dev *indio_dev)
{
struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
+
debugfs_remove_recursive(iio_dev_opaque->debugfs_dentry);
}
@@ -1021,6 +1030,7 @@ int __iio_device_attr_init(struct device_attribute *dev_attr,
int ret = 0;
char *name = NULL;
char *full_postfix;
+
sysfs_attr_init(&dev_attr->attr);
/* Build up postfix of <extend_name>_<modifier>_postfix */
@@ -1299,8 +1309,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
ret = iio_device_add_info_mask_type_avail(indio_dev, chan,
IIO_SEPARATE,
- &chan->
- info_mask_separate_available);
+ &chan->info_mask_separate_available);
if (ret < 0)
return ret;
attrcount += ret;
@@ -1314,8 +1323,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
ret = iio_device_add_info_mask_type_avail(indio_dev, chan,
IIO_SHARED_BY_TYPE,
- &chan->
- info_mask_shared_by_type_available);
+ &chan->info_mask_shared_by_type_available);
if (ret < 0)
return ret;
attrcount += ret;
@@ -1355,6 +1363,7 @@ static int iio_device_add_channel_sysfs(struct iio_dev *indio_dev,
if (chan->ext_info) {
unsigned int i = 0;
+
for (ext_info = chan->ext_info; ext_info->name; ext_info++) {
ret = __iio_add_chan_devattr(ext_info->name,
chan,
@@ -1403,6 +1412,7 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+
return sysfs_emit(buf, "%s\n", indio_dev->name);
}
@@ -1412,6 +1422,7 @@ static ssize_t label_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+
return sysfs_emit(buf, "%s\n", indio_dev->label);
}
@@ -1565,7 +1576,7 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev)
ret = -ENOMEM;
goto error_clear_attrs;
}
- /* Copy across original attributes */
+ /* Copy across original attributes, and point to original binary attributes */
if (indio_dev->info->attrs) {
memcpy(iio_dev_opaque->chan_attr_group.attrs,
indio_dev->info->attrs->attrs,
@@ -1573,6 +1584,8 @@ static int iio_device_register_sysfs(struct iio_dev *indio_dev)
*attrcount_orig);
iio_dev_opaque->chan_attr_group.is_visible =
indio_dev->info->attrs->is_visible;
+ iio_dev_opaque->chan_attr_group.bin_attrs =
+ indio_dev->info->attrs->bin_attrs;
}
attrn = attrcount_orig;
/* Add all elements from the list. */
@@ -1621,6 +1634,8 @@ static void iio_dev_release(struct device *device)
iio_device_detach_buffers(indio_dev);
+ lockdep_unregister_key(&iio_dev_opaque->mlock_key);
+
ida_free(&iio_ida, iio_dev_opaque->id);
kfree(iio_dev_opaque);
}
@@ -1680,6 +1695,9 @@ struct iio_dev *iio_device_alloc(struct device *parent, int sizeof_priv)
INIT_LIST_HEAD(&iio_dev_opaque->buffer_list);
INIT_LIST_HEAD(&iio_dev_opaque->ioctl_handlers);
+ lockdep_register_key(&iio_dev_opaque->mlock_key);
+ lockdep_set_class(&indio_dev->mlock, &iio_dev_opaque->mlock_key);
+
return indio_dev;
}
EXPORT_SYMBOL(iio_device_alloc);
@@ -1777,6 +1795,7 @@ static int iio_chrdev_release(struct inode *inode, struct file *filp)
struct iio_dev_opaque *iio_dev_opaque =
container_of(inode->i_cdev, struct iio_dev_opaque, chrdev);
struct iio_dev *indio_dev = &iio_dev_opaque->indio_dev;
+
kfree(ib);
clear_bit(IIO_BUSY_BIT_POS, &iio_dev_opaque->flags);
iio_device_put(indio_dev);
diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c
index b5e059e15b0a..3d78da2531a9 100644
--- a/drivers/iio/industrialio-event.c
+++ b/drivers/iio/industrialio-event.c
@@ -231,12 +231,15 @@ static const char * const iio_ev_type_text[] = {
[IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive",
[IIO_EV_TYPE_CHANGE] = "change",
[IIO_EV_TYPE_MAG_REFERENCED] = "mag_referenced",
+ [IIO_EV_TYPE_GESTURE] = "gesture",
};
static const char * const iio_ev_dir_text[] = {
[IIO_EV_DIR_EITHER] = "either",
[IIO_EV_DIR_RISING] = "rising",
- [IIO_EV_DIR_FALLING] = "falling"
+ [IIO_EV_DIR_FALLING] = "falling",
+ [IIO_EV_DIR_SINGLETAP] = "singletap",
+ [IIO_EV_DIR_DOUBLETAP] = "doubletap",
};
static const char * const iio_ev_info_text[] = {
@@ -247,6 +250,8 @@ static const char * const iio_ev_info_text[] = {
[IIO_EV_INFO_HIGH_PASS_FILTER_3DB] = "high_pass_filter_3db",
[IIO_EV_INFO_LOW_PASS_FILTER_3DB] = "low_pass_filter_3db",
[IIO_EV_INFO_TIMEOUT] = "timeout",
+ [IIO_EV_INFO_RESET_TIMEOUT] = "reset_timeout",
+ [IIO_EV_INFO_TAP2_MIN_DELAY] = "tap2_min_delay",
};
static enum iio_event_direction iio_ev_attr_dir(struct iio_dev_attr *attr)
@@ -354,9 +359,10 @@ static int iio_device_add_event(struct iio_dev *indio_dev,
enum iio_shared_by shared_by, const unsigned long *mask)
{
struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
- ssize_t (*show)(struct device *, struct device_attribute *, char *);
- ssize_t (*store)(struct device *, struct device_attribute *,
- const char *, size_t);
+ ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+ char *buf);
+ ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len);
unsigned int attrcount = 0;
unsigned int i;
char *postfix;
diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index b78814d869b7..6885a186fe27 100644
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -50,6 +50,7 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct iio_trigger *trig = to_iio_trigger(dev);
+
return sysfs_emit(buf, "%s\n", trig->name);
}
diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c
index df74765d33dc..872fd5c24147 100644
--- a/drivers/iio/inkern.c
+++ b/drivers/iio/inkern.c
@@ -5,9 +5,9 @@
*/
#include <linux/err.h>
#include <linux/export.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/mutex.h>
-#include <linux/of.h>
#include <linux/iio/iio.h>
#include <linux/iio/iio-opaque.h>
@@ -45,13 +45,13 @@ int iio_map_array_register(struct iio_dev *indio_dev, struct iio_map *maps)
int i = 0, ret = 0;
struct iio_map_internal *mapi;
- if (maps == NULL)
+ if (!maps)
return 0;
mutex_lock(&iio_map_list_lock);
- while (maps[i].consumer_dev_name != NULL) {
+ while (maps[i].consumer_dev_name) {
mapi = kzalloc(sizeof(*mapi), GFP_KERNEL);
- if (mapi == NULL) {
+ if (!mapi) {
ret = -ENOMEM;
goto error_ret;
}
@@ -69,7 +69,6 @@ error_ret:
}
EXPORT_SYMBOL_GPL(iio_map_array_register);
-
/*
* Remove all map entries associated with the given iio device
*/
@@ -117,15 +116,8 @@ static const struct iio_chan_spec
return chan;
}
-#ifdef CONFIG_OF
-
-static int iio_dev_node_match(struct device *dev, const void *data)
-{
- return dev->of_node == data && dev->type == &iio_device_type;
-}
-
/**
- * __of_iio_simple_xlate - translate iiospec to the IIO channel index
+ * __fwnode_iio_simple_xlate - translate iiospec to the IIO channel index
* @indio_dev: pointer to the iio_dev structure
* @iiospec: IIO specifier as found in the device tree
*
@@ -134,14 +126,14 @@ static int iio_dev_node_match(struct device *dev, const void *data)
* whether IIO index is less than num_channels (that is specified in the
* iio_dev).
*/
-static int __of_iio_simple_xlate(struct iio_dev *indio_dev,
- const struct of_phandle_args *iiospec)
+static int __fwnode_iio_simple_xlate(struct iio_dev *indio_dev,
+ const struct fwnode_reference_args *iiospec)
{
- if (!iiospec->args_count)
+ if (!iiospec->nargs)
return 0;
if (iiospec->args[0] >= indio_dev->num_channels) {
- dev_err(&indio_dev->dev, "invalid channel index %u\n",
+ dev_err(&indio_dev->dev, "invalid channel index %llu\n",
iiospec->args[0]);
return -EINVAL;
}
@@ -149,32 +141,33 @@ static int __of_iio_simple_xlate(struct iio_dev *indio_dev,
return iiospec->args[0];
}
-static int __of_iio_channel_get(struct iio_channel *channel,
- struct device_node *np, int index)
+static int __fwnode_iio_channel_get(struct iio_channel *channel,
+ struct fwnode_handle *fwnode, int index)
{
+ struct fwnode_reference_args iiospec;
struct device *idev;
struct iio_dev *indio_dev;
int err;
- struct of_phandle_args iiospec;
- err = of_parse_phandle_with_args(np, "io-channels",
- "#io-channel-cells",
- index, &iiospec);
+ err = fwnode_property_get_reference_args(fwnode, "io-channels",
+ "#io-channel-cells", 0,
+ index, &iiospec);
if (err)
return err;
- idev = bus_find_device(&iio_bus_type, NULL, iiospec.np,
- iio_dev_node_match);
- of_node_put(iiospec.np);
- if (idev == NULL)
+ idev = bus_find_device_by_fwnode(&iio_bus_type, iiospec.fwnode);
+ if (!idev) {
+ fwnode_handle_put(iiospec.fwnode);
return -EPROBE_DEFER;
+ }
indio_dev = dev_to_iio_dev(idev);
channel->indio_dev = indio_dev;
- if (indio_dev->info->of_xlate)
- index = indio_dev->info->of_xlate(indio_dev, &iiospec);
+ if (indio_dev->info->fwnode_xlate)
+ index = indio_dev->info->fwnode_xlate(indio_dev, &iiospec);
else
- index = __of_iio_simple_xlate(indio_dev, &iiospec);
+ index = __fwnode_iio_simple_xlate(indio_dev, &iiospec);
+ fwnode_handle_put(iiospec.fwnode);
if (index < 0)
goto err_put;
channel->channel = &indio_dev->channels[index];
@@ -186,7 +179,8 @@ err_put:
return index;
}
-static struct iio_channel *of_iio_channel_get(struct device_node *np, int index)
+static struct iio_channel *fwnode_iio_channel_get(struct fwnode_handle *fwnode,
+ int index)
{
struct iio_channel *channel;
int err;
@@ -195,10 +189,10 @@ static struct iio_channel *of_iio_channel_get(struct device_node *np, int index)
return ERR_PTR(-EINVAL);
channel = kzalloc(sizeof(*channel), GFP_KERNEL);
- if (channel == NULL)
+ if (!channel)
return ERR_PTR(-ENOMEM);
- err = __of_iio_channel_get(channel, np, index);
+ err = __fwnode_iio_channel_get(channel, fwnode, index);
if (err)
goto err_free_channel;
@@ -209,74 +203,116 @@ err_free_channel:
return ERR_PTR(err);
}
-struct iio_channel *of_iio_channel_get_by_name(struct device_node *np,
- const char *name)
+static struct iio_channel *
+__fwnode_iio_channel_get_by_name(struct fwnode_handle *fwnode, const char *name)
{
- struct iio_channel *chan = NULL;
-
- /* Walk up the tree of devices looking for a matching iio channel */
- while (np) {
- int index = 0;
-
+ struct iio_channel *chan;
+ int index = 0;
+
+ /*
+ * For named iio channels, first look up the name in the
+ * "io-channel-names" property. If it cannot be found, the
+ * index will be an error code, and fwnode_iio_channel_get()
+ * will fail.
+ */
+ if (name)
+ index = fwnode_property_match_string(fwnode, "io-channel-names",
+ name);
+
+ chan = fwnode_iio_channel_get(fwnode, index);
+ if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER)
+ return chan;
+ if (name) {
+ if (index >= 0) {
+ pr_err("ERROR: could not get IIO channel %pfw:%s(%i)\n",
+ fwnode, name, index);
+ /*
+ * In this case, we found 'name' in 'io-channel-names'
+ * but somehow we still fail so that we should not proceed
+ * with any other lookup. Hence, explicitly return -EINVAL
+ * (maybe not the better error code) so that the caller
+ * won't do a system lookup.
+ */
+ return ERR_PTR(-EINVAL);
+ }
/*
- * For named iio channels, first look up the name in the
- * "io-channel-names" property. If it cannot be found, the
- * index will be an error code, and of_iio_channel_get()
- * will fail.
+ * If index < 0, then fwnode_property_get_reference_args() fails
+ * with -EINVAL or -ENOENT (ACPI case) which is expected. We
+ * should not proceed if we get any other error.
*/
- if (name)
- index = of_property_match_string(np, "io-channel-names",
- name);
- chan = of_iio_channel_get(np, index);
- if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER)
- break;
- else if (name && index >= 0) {
- pr_err("ERROR: could not get IIO channel %pOF:%s(%i)\n",
- np, name ? name : "", index);
- return NULL;
- }
-
+ if (PTR_ERR(chan) != -EINVAL && PTR_ERR(chan) != -ENOENT)
+ return chan;
+ } else if (PTR_ERR(chan) != -ENOENT) {
/*
- * No matching IIO channel found on this node.
- * If the parent node has a "io-channel-ranges" property,
- * then we can try one of its channels.
+ * if !name, then we should only proceed the lookup if
+ * fwnode_property_get_reference_args() returns -ENOENT.
*/
- np = np->parent;
- if (np && !of_get_property(np, "io-channel-ranges", NULL))
- return NULL;
+ return chan;
}
- return chan;
+ /* so we continue the lookup */
+ return ERR_PTR(-ENODEV);
}
-EXPORT_SYMBOL_GPL(of_iio_channel_get_by_name);
-static struct iio_channel *of_iio_channel_get_all(struct device *dev)
+struct iio_channel *fwnode_iio_channel_get_by_name(struct fwnode_handle *fwnode,
+ const char *name)
{
+ struct fwnode_handle *parent;
+ struct iio_channel *chan;
+
+ /* Walk up the tree of devices looking for a matching iio channel */
+ chan = __fwnode_iio_channel_get_by_name(fwnode, name);
+ if (!IS_ERR(chan) || PTR_ERR(chan) != -ENODEV)
+ return chan;
+
+ /*
+ * No matching IIO channel found on this node.
+ * If the parent node has a "io-channel-ranges" property,
+ * then we can try one of its channels.
+ */
+ fwnode_for_each_parent_node(fwnode, parent) {
+ if (!fwnode_property_present(parent, "io-channel-ranges")) {
+ fwnode_handle_put(parent);
+ return ERR_PTR(-ENODEV);
+ }
+
+ chan = __fwnode_iio_channel_get_by_name(fwnode, name);
+ if (!IS_ERR(chan) || PTR_ERR(chan) != -ENODEV) {
+ fwnode_handle_put(parent);
+ return chan;
+ }
+ }
+
+ return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL_GPL(fwnode_iio_channel_get_by_name);
+
+static struct iio_channel *fwnode_iio_channel_get_all(struct device *dev)
+{
+ struct fwnode_handle *fwnode = dev_fwnode(dev);
struct iio_channel *chans;
int i, mapind, nummaps = 0;
int ret;
do {
- ret = of_parse_phandle_with_args(dev->of_node,
- "io-channels",
- "#io-channel-cells",
- nummaps, NULL);
+ ret = fwnode_property_get_reference_args(fwnode, "io-channels",
+ "#io-channel-cells", 0,
+ nummaps, NULL);
if (ret < 0)
break;
} while (++nummaps);
- if (nummaps == 0) /* no error, return NULL to search map table */
- return NULL;
+ if (nummaps == 0)
+ return ERR_PTR(-ENODEV);
/* NULL terminated array to save passing size */
chans = kcalloc(nummaps + 1, sizeof(*chans), GFP_KERNEL);
- if (chans == NULL)
+ if (!chans)
return ERR_PTR(-ENOMEM);
- /* Search for OF matches */
+ /* Search for FW matches */
for (mapind = 0; mapind < nummaps; mapind++) {
- ret = __of_iio_channel_get(&chans[mapind], dev->of_node,
- mapind);
+ ret = __fwnode_iio_channel_get(&chans[mapind], fwnode, mapind);
if (ret)
goto error_free_chans;
}
@@ -289,15 +325,6 @@ error_free_chans:
return ERR_PTR(ret);
}
-#else /* CONFIG_OF */
-
-static inline struct iio_channel *of_iio_channel_get_all(struct device *dev)
-{
- return NULL;
-}
-
-#endif /* CONFIG_OF */
-
static struct iio_channel *iio_channel_get_sys(const char *name,
const char *channel_name)
{
@@ -305,7 +332,7 @@ static struct iio_channel *iio_channel_get_sys(const char *name,
struct iio_channel *channel;
int err;
- if (name == NULL && channel_name == NULL)
+ if (!(name || channel_name))
return ERR_PTR(-ENODEV);
/* first find matching entry the channel map */
@@ -320,11 +347,11 @@ static struct iio_channel *iio_channel_get_sys(const char *name,
break;
}
mutex_unlock(&iio_map_list_lock);
- if (c == NULL)
+ if (!c)
return ERR_PTR(-ENODEV);
channel = kzalloc(sizeof(*channel), GFP_KERNEL);
- if (channel == NULL) {
+ if (!channel) {
err = -ENOMEM;
goto error_no_mem;
}
@@ -336,7 +363,7 @@ static struct iio_channel *iio_channel_get_sys(const char *name,
iio_chan_spec_from_name(channel->indio_dev,
c->map->adc_channel_label);
- if (channel->channel == NULL) {
+ if (!channel->channel) {
err = -EINVAL;
goto error_no_chan;
}
@@ -358,9 +385,9 @@ struct iio_channel *iio_channel_get(struct device *dev,
struct iio_channel *channel;
if (dev) {
- channel = of_iio_channel_get_by_name(dev->of_node,
- channel_name);
- if (channel != NULL)
+ channel = fwnode_iio_channel_get_by_name(dev_fwnode(dev),
+ channel_name);
+ if (!IS_ERR(channel) || PTR_ERR(channel) != -ENODEV)
return channel;
}
@@ -400,14 +427,14 @@ struct iio_channel *devm_iio_channel_get(struct device *dev,
}
EXPORT_SYMBOL_GPL(devm_iio_channel_get);
-struct iio_channel *devm_of_iio_channel_get_by_name(struct device *dev,
- struct device_node *np,
- const char *channel_name)
+struct iio_channel *devm_fwnode_iio_channel_get_by_name(struct device *dev,
+ struct fwnode_handle *fwnode,
+ const char *channel_name)
{
struct iio_channel *channel;
int ret;
- channel = of_iio_channel_get_by_name(np, channel_name);
+ channel = fwnode_iio_channel_get_by_name(fwnode, channel_name);
if (IS_ERR(channel))
return channel;
@@ -417,7 +444,7 @@ struct iio_channel *devm_of_iio_channel_get_by_name(struct device *dev,
return channel;
}
-EXPORT_SYMBOL_GPL(devm_of_iio_channel_get_by_name);
+EXPORT_SYMBOL_GPL(devm_fwnode_iio_channel_get_by_name);
struct iio_channel *iio_channel_get_all(struct device *dev)
{
@@ -428,11 +455,15 @@ struct iio_channel *iio_channel_get_all(struct device *dev)
int mapind = 0;
int i, ret;
- if (dev == NULL)
+ if (!dev)
return ERR_PTR(-EINVAL);
- chans = of_iio_channel_get_all(dev);
- if (chans)
+ chans = fwnode_iio_channel_get_all(dev);
+ /*
+ * We only want to carry on if the error is -ENODEV. Anything else
+ * should be reported up the stack.
+ */
+ if (!IS_ERR(chans) || PTR_ERR(chans) != -ENODEV)
return chans;
name = dev_name(dev);
@@ -452,7 +483,7 @@ struct iio_channel *iio_channel_get_all(struct device *dev)
/* NULL terminated array to save passing size */
chans = kcalloc(nummaps + 1, sizeof(*chans), GFP_KERNEL);
- if (chans == NULL) {
+ if (!chans) {
ret = -ENOMEM;
goto error_ret;
}
@@ -466,7 +497,7 @@ struct iio_channel *iio_channel_get_all(struct device *dev)
chans[mapind].channel =
iio_chan_spec_from_name(chans[mapind].indio_dev,
c->map->adc_channel_label);
- if (chans[mapind].channel == NULL) {
+ if (!chans[mapind].channel) {
ret = -EINVAL;
goto error_free_chans;
}
@@ -528,14 +559,14 @@ struct iio_channel *devm_iio_channel_get_all(struct device *dev)
EXPORT_SYMBOL_GPL(devm_iio_channel_get_all);
static int iio_channel_read(struct iio_channel *chan, int *val, int *val2,
- enum iio_chan_info_enum info)
+ enum iio_chan_info_enum info)
{
int unused;
int vals[INDIO_MAX_RAW_ELEMENTS];
int ret;
int val_len = 2;
- if (val2 == NULL)
+ if (!val2)
val2 = &unused;
if (!iio_channel_has_info(chan->channel, info))
@@ -547,9 +578,10 @@ static int iio_channel_read(struct iio_channel *chan, int *val, int *val2,
vals, &val_len, info);
*val = vals[0];
*val2 = vals[1];
- } else
+ } else {
ret = chan->indio_dev->info->read_raw(chan->indio_dev,
chan->channel, val, val2, info);
+ }
return ret;
}
@@ -560,7 +592,7 @@ int iio_read_channel_raw(struct iio_channel *chan, int *val)
int ret;
mutex_lock(&iio_dev_opaque->info_exist_lock);
- if (chan->indio_dev->info == NULL) {
+ if (!chan->indio_dev->info) {
ret = -ENODEV;
goto err_unlock;
}
@@ -579,7 +611,7 @@ int iio_read_channel_average_raw(struct iio_channel *chan, int *val)
int ret;
mutex_lock(&iio_dev_opaque->info_exist_lock);
- if (chan->indio_dev->info == NULL) {
+ if (!chan->indio_dev->info) {
ret = -ENODEV;
goto err_unlock;
}
@@ -593,7 +625,8 @@ err_unlock:
EXPORT_SYMBOL_GPL(iio_read_channel_average_raw);
static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
- int raw, int *processed, unsigned int scale)
+ int raw, int *processed,
+ unsigned int scale)
{
int scale_type, scale_val, scale_val2;
int offset_type, offset_val, offset_val2;
@@ -626,7 +659,7 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
}
scale_type = iio_channel_read(chan, &scale_val, &scale_val2,
- IIO_CHAN_INFO_SCALE);
+ IIO_CHAN_INFO_SCALE);
if (scale_type < 0) {
/*
* If no channel scaling is available apply consumer scale to
@@ -671,19 +704,19 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
}
int iio_convert_raw_to_processed(struct iio_channel *chan, int raw,
- int *processed, unsigned int scale)
+ int *processed, unsigned int scale)
{
struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(chan->indio_dev);
int ret;
mutex_lock(&iio_dev_opaque->info_exist_lock);
- if (chan->indio_dev->info == NULL) {
+ if (!chan->indio_dev->info) {
ret = -ENODEV;
goto err_unlock;
}
ret = iio_convert_raw_to_processed_unlocked(chan, raw, processed,
- scale);
+ scale);
err_unlock:
mutex_unlock(&iio_dev_opaque->info_exist_lock);
@@ -698,7 +731,7 @@ int iio_read_channel_attribute(struct iio_channel *chan, int *val, int *val2,
int ret;
mutex_lock(&iio_dev_opaque->info_exist_lock);
- if (chan->indio_dev->info == NULL) {
+ if (!chan->indio_dev->info) {
ret = -ENODEV;
goto err_unlock;
}
@@ -724,7 +757,7 @@ int iio_read_channel_processed_scale(struct iio_channel *chan, int *val,
int ret;
mutex_lock(&iio_dev_opaque->info_exist_lock);
- if (chan->indio_dev->info == NULL) {
+ if (!chan->indio_dev->info) {
ret = -ENODEV;
goto err_unlock;
}
@@ -802,7 +835,7 @@ int iio_read_avail_channel_raw(struct iio_channel *chan,
int type;
ret = iio_read_avail_channel_attribute(chan, vals, &type, length,
- IIO_CHAN_INFO_RAW);
+ IIO_CHAN_INFO_RAW);
if (ret >= 0 && type != IIO_VAL_INT)
/* raw values are assumed to be IIO_VAL_INT */
@@ -886,7 +919,7 @@ int iio_get_channel_type(struct iio_channel *chan, enum iio_chan_type *type)
/* Need to verify underlying driver has not gone away */
mutex_lock(&iio_dev_opaque->info_exist_lock);
- if (chan->indio_dev->info == NULL) {
+ if (!chan->indio_dev->info) {
ret = -ENODEV;
goto err_unlock;
}
@@ -913,7 +946,7 @@ int iio_write_channel_attribute(struct iio_channel *chan, int val, int val2,
int ret;
mutex_lock(&iio_dev_opaque->info_exist_lock);
- if (chan->indio_dev->info == NULL) {
+ if (!chan->indio_dev->info) {
ret = -ENODEV;
goto err_unlock;
}
@@ -947,9 +980,8 @@ unsigned int iio_get_channel_ext_info_count(struct iio_channel *chan)
}
EXPORT_SYMBOL_GPL(iio_get_channel_ext_info_count);
-static const struct iio_chan_spec_ext_info *iio_lookup_ext_info(
- const struct iio_channel *chan,
- const char *attr)
+static const struct iio_chan_spec_ext_info *
+iio_lookup_ext_info(const struct iio_channel *chan, const char *attr)
{
const struct iio_chan_spec_ext_info *ext_info;
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 8537e88f02e3..7cf6e8490123 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -331,6 +331,17 @@ config LTR501
This driver can also be built as a module. If so, the module
will be called ltr501.
+config LTRF216A
+ tristate "Liteon LTRF216A Light Sensor"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ If you say Y or M here, you get support for Liteon LTRF216A
+ Ambient Light Sensor.
+
+ If built as a dynamically linked module, it will be called
+ ltrf216a.
+
config LV0104CS
tristate "LV0104CS Ambient Light Sensor"
depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index d10912faf964..6f23817fae6f 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_ISL29125) += isl29125.o
obj-$(CONFIG_JSA1212) += jsa1212.o
obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o
obj-$(CONFIG_LTR501) += ltr501.o
+obj-$(CONFIG_LTRF216A) += ltrf216a.o
obj-$(CONFIG_LV0104CS) += lv0104cs.o
obj-$(CONFIG_MAX44000) += max44000.o
obj-$(CONFIG_MAX44009) += max44009.o
diff --git a/drivers/iio/light/ltrf216a.c b/drivers/iio/light/ltrf216a.c
new file mode 100644
index 000000000000..4b8ef36b6912
--- /dev/null
+++ b/drivers/iio/light/ltrf216a.c
@@ -0,0 +1,550 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LTRF216A Ambient Light Sensor
+ *
+ * Copyright (C) 2022 Collabora, Ltd.
+ * Author: Shreeya Patel <shreeya.patel@collabora.com>
+ *
+ * Copyright (C) 2021 Lite-On Technology Corp (Singapore)
+ * Author: Shi Zhigang <Zhigang.Shi@liteon.com>
+ *
+ * IIO driver for LTRF216A (7-bit I2C slave address 0x53).
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+
+#include <asm/unaligned.h>
+
+#define LTRF216A_ALS_RESET_MASK BIT(4)
+#define LTRF216A_ALS_DATA_STATUS BIT(3)
+#define LTRF216A_ALS_ENABLE_MASK BIT(1)
+#define LTRF216A_MAIN_CTRL 0x00
+#define LTRF216A_ALS_MEAS_RES 0x04
+#define LTRF216A_ALS_GAIN 0x05
+#define LTRF216A_PART_ID 0x06
+#define LTRF216A_MAIN_STATUS 0x07
+#define LTRF216A_ALS_CLEAR_DATA_0 0x0a
+#define LTRF216A_ALS_CLEAR_DATA_1 0x0b
+#define LTRF216A_ALS_CLEAR_DATA_2 0x0c
+#define LTRF216A_ALS_DATA_0 0x0d
+#define LTRF216A_ALS_DATA_1 0x0e
+#define LTRF216A_ALS_DATA_2 0x0f
+#define LTRF216A_INT_CFG 0x19
+#define LTRF216A_INT_PST 0x1a
+#define LTRF216A_ALS_THRES_UP_0 0x21
+#define LTRF216A_ALS_THRES_UP_1 0x22
+#define LTRF216A_ALS_THRES_UP_2 0x23
+#define LTRF216A_ALS_THRES_LOW_0 0x24
+#define LTRF216A_ALS_THRES_LOW_1 0x25
+#define LTRF216A_ALS_THRES_LOW_2 0x26
+#define LTRF216A_ALS_READ_DATA_DELAY_US 20000
+
+static const int ltrf216a_int_time_available[][2] = {
+ { 0, 400000 },
+ { 0, 200000 },
+ { 0, 100000 },
+ { 0, 50000 },
+ { 0, 25000 },
+};
+
+static const int ltrf216a_int_time_reg[][2] = {
+ { 400, 0x03 },
+ { 200, 0x13 },
+ { 100, 0x22 },
+ { 50, 0x31 },
+ { 25, 0x40 },
+};
+
+/*
+ * Window Factor is needed when the device is under Window glass
+ * with coated tinted ink. This is to compensate for the light loss
+ * due to the lower transmission rate of the window glass and helps
+ * in calculating lux.
+ */
+#define LTRF216A_WIN_FAC 1
+
+struct ltrf216a_data {
+ struct regmap *regmap;
+ struct i2c_client *client;
+ u32 int_time;
+ u16 int_time_fac;
+ u8 als_gain_fac;
+ /*
+ * Protects regmap accesses and makes sure integration time
+ * remains constant during the measurement of lux.
+ */
+ struct mutex lock;
+};
+
+static const struct iio_chan_spec ltrf216a_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_INT_TIME),
+ .info_mask_separate_available =
+ BIT(IIO_CHAN_INFO_INT_TIME),
+ },
+};
+
+static void ltrf216a_reset(struct iio_dev *indio_dev)
+{
+ struct ltrf216a_data *data = iio_priv(indio_dev);
+
+ /* reset sensor, chip fails to respond to this, so ignore any errors */
+ regmap_write(data->regmap, LTRF216A_MAIN_CTRL, LTRF216A_ALS_RESET_MASK);
+
+ /* reset time */
+ usleep_range(1000, 2000);
+}
+
+static int ltrf216a_enable(struct iio_dev *indio_dev)
+{
+ struct ltrf216a_data *data = iio_priv(indio_dev);
+ struct device *dev = &data->client->dev;
+ int ret;
+
+ /* enable sensor */
+ ret = regmap_set_bits(data->regmap,
+ LTRF216A_MAIN_CTRL, LTRF216A_ALS_ENABLE_MASK);
+ if (ret) {
+ dev_err(dev, "failed to enable sensor: %d\n", ret);
+ return ret;
+ }
+
+ /* sleep for one integration cycle after enabling the device */
+ msleep(ltrf216a_int_time_reg[0][0]);
+
+ return 0;
+}
+
+static int ltrf216a_disable(struct iio_dev *indio_dev)
+{
+ struct ltrf216a_data *data = iio_priv(indio_dev);
+ struct device *dev = &data->client->dev;
+ int ret;
+
+ ret = regmap_write(data->regmap, LTRF216A_MAIN_CTRL, 0);
+ if (ret)
+ dev_err(dev, "failed to disable sensor: %d\n", ret);
+
+ return ret;
+}
+
+static void ltrf216a_cleanup(void *data)
+{
+ struct iio_dev *indio_dev = data;
+
+ ltrf216a_disable(indio_dev);
+}
+
+static int ltrf216a_set_int_time(struct ltrf216a_data *data, int itime)
+{
+ struct device *dev = &data->client->dev;
+ unsigned int i;
+ u8 reg_val;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(ltrf216a_int_time_available); i++) {
+ if (ltrf216a_int_time_available[i][1] == itime)
+ break;
+ }
+ if (i == ARRAY_SIZE(ltrf216a_int_time_available))
+ return -EINVAL;
+
+ reg_val = ltrf216a_int_time_reg[i][1];
+
+ ret = regmap_write(data->regmap, LTRF216A_ALS_MEAS_RES, reg_val);
+ if (ret) {
+ dev_err(dev, "failed to set integration time: %d\n", ret);
+ return ret;
+ }
+
+ data->int_time_fac = ltrf216a_int_time_reg[i][0];
+ data->int_time = itime;
+
+ return 0;
+}
+
+static int ltrf216a_get_int_time(struct ltrf216a_data *data,
+ int *val, int *val2)
+{
+ *val = 0;
+ *val2 = data->int_time;
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int ltrf216a_set_power_state(struct ltrf216a_data *data, bool on)
+{
+ struct device *dev = &data->client->dev;
+ int ret = 0;
+
+ if (on) {
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret) {
+ dev_err(dev, "failed to resume runtime PM: %d\n", ret);
+ return ret;
+ }
+ } else {
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+ }
+
+ return ret;
+}
+
+static int ltrf216a_read_data(struct ltrf216a_data *data, u8 addr)
+{
+ struct device *dev = &data->client->dev;
+ int ret, val;
+ u8 buf[3];
+
+ ret = regmap_read_poll_timeout(data->regmap, LTRF216A_MAIN_STATUS,
+ val, val & LTRF216A_ALS_DATA_STATUS,
+ LTRF216A_ALS_READ_DATA_DELAY_US,
+ LTRF216A_ALS_READ_DATA_DELAY_US * 50);
+ if (ret) {
+ dev_err(dev, "failed to wait for measurement data: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_bulk_read(data->regmap, addr, buf, sizeof(buf));
+ if (ret) {
+ dev_err(dev, "failed to read measurement data: %d\n", ret);
+ return ret;
+ }
+
+ return get_unaligned_le24(&buf[0]);
+}
+
+static int ltrf216a_get_lux(struct ltrf216a_data *data)
+{
+ int ret, greendata;
+ u64 lux, div;
+
+ ret = ltrf216a_set_power_state(data, true);
+ if (ret)
+ return ret;
+
+ greendata = ltrf216a_read_data(data, LTRF216A_ALS_DATA_0);
+ if (greendata < 0)
+ return greendata;
+
+ ltrf216a_set_power_state(data, false);
+
+ lux = greendata * 45 * LTRF216A_WIN_FAC * 100;
+ div = data->als_gain_fac * data->int_time_fac * 100;
+
+ return div_u64(lux, div);
+}
+
+static int ltrf216a_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct ltrf216a_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = ltrf216a_set_power_state(data, true);
+ if (ret)
+ return ret;
+ mutex_lock(&data->lock);
+ ret = ltrf216a_read_data(data, LTRF216A_ALS_DATA_0);
+ mutex_unlock(&data->lock);
+ ltrf216a_set_power_state(data, false);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_PROCESSED:
+ mutex_lock(&data->lock);
+ ret = ltrf216a_get_lux(data);
+ mutex_unlock(&data->lock);
+ if (ret < 0)
+ return ret;
+ *val = ret;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_INT_TIME:
+ mutex_lock(&data->lock);
+ ret = ltrf216a_get_int_time(data, val, val2);
+ mutex_unlock(&data->lock);
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ltrf216a_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val,
+ int val2, long mask)
+{
+ struct ltrf216a_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ if (val != 0)
+ return -EINVAL;
+ mutex_lock(&data->lock);
+ ret = ltrf216a_set_int_time(data, val2);
+ mutex_unlock(&data->lock);
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ltrf216a_read_available(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ *length = ARRAY_SIZE(ltrf216a_int_time_available) * 2;
+ *vals = (const int *)ltrf216a_int_time_available;
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info ltrf216a_info = {
+ .read_raw = ltrf216a_read_raw,
+ .write_raw = ltrf216a_write_raw,
+ .read_avail = ltrf216a_read_available,
+};
+
+static bool ltrf216a_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case LTRF216A_MAIN_CTRL:
+ case LTRF216A_ALS_MEAS_RES:
+ case LTRF216A_ALS_GAIN:
+ case LTRF216A_PART_ID:
+ case LTRF216A_MAIN_STATUS:
+ case LTRF216A_ALS_CLEAR_DATA_0:
+ case LTRF216A_ALS_CLEAR_DATA_1:
+ case LTRF216A_ALS_CLEAR_DATA_2:
+ case LTRF216A_ALS_DATA_0:
+ case LTRF216A_ALS_DATA_1:
+ case LTRF216A_ALS_DATA_2:
+ case LTRF216A_INT_CFG:
+ case LTRF216A_INT_PST:
+ case LTRF216A_ALS_THRES_UP_0:
+ case LTRF216A_ALS_THRES_UP_1:
+ case LTRF216A_ALS_THRES_UP_2:
+ case LTRF216A_ALS_THRES_LOW_0:
+ case LTRF216A_ALS_THRES_LOW_1:
+ case LTRF216A_ALS_THRES_LOW_2:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool ltrf216a_writable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case LTRF216A_MAIN_CTRL:
+ case LTRF216A_ALS_MEAS_RES:
+ case LTRF216A_ALS_GAIN:
+ case LTRF216A_INT_CFG:
+ case LTRF216A_INT_PST:
+ case LTRF216A_ALS_THRES_UP_0:
+ case LTRF216A_ALS_THRES_UP_1:
+ case LTRF216A_ALS_THRES_UP_2:
+ case LTRF216A_ALS_THRES_LOW_0:
+ case LTRF216A_ALS_THRES_LOW_1:
+ case LTRF216A_ALS_THRES_LOW_2:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool ltrf216a_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case LTRF216A_MAIN_STATUS:
+ case LTRF216A_ALS_CLEAR_DATA_0:
+ case LTRF216A_ALS_CLEAR_DATA_1:
+ case LTRF216A_ALS_CLEAR_DATA_2:
+ case LTRF216A_ALS_DATA_0:
+ case LTRF216A_ALS_DATA_1:
+ case LTRF216A_ALS_DATA_2:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool ltrf216a_precious_reg(struct device *dev, unsigned int reg)
+{
+ return reg == LTRF216A_MAIN_STATUS;
+}
+
+static const struct regmap_config ltrf216a_regmap_config = {
+ .name = "ltrf216a",
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .max_register = LTRF216A_ALS_THRES_LOW_2,
+ .readable_reg = ltrf216a_readable_reg,
+ .writeable_reg = ltrf216a_writable_reg,
+ .volatile_reg = ltrf216a_volatile_reg,
+ .precious_reg = ltrf216a_precious_reg,
+ .disable_locking = true,
+};
+
+static int ltrf216a_probe(struct i2c_client *client)
+{
+ struct ltrf216a_data *data;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+
+ data->regmap = devm_regmap_init_i2c(client, &ltrf216a_regmap_config);
+ if (IS_ERR(data->regmap))
+ return dev_err_probe(&client->dev, PTR_ERR(data->regmap),
+ "regmap initialization failed\n");
+
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+
+ mutex_init(&data->lock);
+
+ indio_dev->info = &ltrf216a_info;
+ indio_dev->name = "ltrf216a";
+ indio_dev->channels = ltrf216a_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ltrf216a_channels);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = pm_runtime_set_active(&client->dev);
+ if (ret)
+ return ret;
+
+ /* reset sensor, chip fails to respond to this, so ignore any errors */
+ ltrf216a_reset(indio_dev);
+
+ ret = regmap_reinit_cache(data->regmap, &ltrf216a_regmap_config);
+ if (ret)
+ return dev_err_probe(&client->dev, ret,
+ "failed to reinit regmap cache\n");
+
+ ret = ltrf216a_enable(indio_dev);
+ if (ret)
+ return ret;
+
+ ret = devm_add_action_or_reset(&client->dev, ltrf216a_cleanup,
+ indio_dev);
+ if (ret)
+ return ret;
+
+ ret = devm_pm_runtime_enable(&client->dev);
+ if (ret)
+ return dev_err_probe(&client->dev, ret,
+ "failed to enable runtime PM\n");
+
+ pm_runtime_set_autosuspend_delay(&client->dev, 1000);
+ pm_runtime_use_autosuspend(&client->dev);
+
+ data->int_time = 100000;
+ data->int_time_fac = 100;
+ data->als_gain_fac = 3;
+
+ return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static int ltrf216a_runtime_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct ltrf216a_data *data = iio_priv(indio_dev);
+ int ret;
+
+ ret = ltrf216a_disable(indio_dev);
+ if (ret)
+ return ret;
+
+ regcache_cache_only(data->regmap, true);
+
+ return 0;
+}
+
+static int ltrf216a_runtime_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+ struct ltrf216a_data *data = iio_priv(indio_dev);
+ int ret;
+
+ regcache_cache_only(data->regmap, false);
+ regcache_mark_dirty(data->regmap);
+ ret = regcache_sync(data->regmap);
+ if (ret)
+ goto cache_only;
+
+ ret = ltrf216a_enable(indio_dev);
+ if (ret)
+ goto cache_only;
+
+ return 0;
+
+cache_only:
+ regcache_cache_only(data->regmap, true);
+
+ return ret;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(ltrf216a_pm_ops, ltrf216a_runtime_suspend,
+ ltrf216a_runtime_resume, NULL);
+
+static const struct i2c_device_id ltrf216a_id[] = {
+ { "ltrf216a" },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, ltrf216a_id);
+
+static const struct of_device_id ltrf216a_of_match[] = {
+ { .compatible = "liteon,ltrf216a" },
+ { .compatible = "ltr,ltrf216a" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ltrf216a_of_match);
+
+static struct i2c_driver ltrf216a_driver = {
+ .driver = {
+ .name = "ltrf216a",
+ .pm = pm_ptr(&ltrf216a_pm_ops),
+ .of_match_table = ltrf216a_of_match,
+ },
+ .probe_new = ltrf216a_probe,
+ .id_table = ltrf216a_id,
+};
+module_i2c_driver(ltrf216a_driver);
+
+MODULE_AUTHOR("Shreeya Patel <shreeya.patel@collabora.com>");
+MODULE_AUTHOR("Shi Zhigang <Zhigang.Shi@liteon.com>");
+MODULE_DESCRIPTION("LTRF216A ambient light sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/light/st_uvis25_core.c b/drivers/iio/light/st_uvis25_core.c
index 3d4cc1180b6a..c737d3e193ae 100644
--- a/drivers/iio/light/st_uvis25_core.c
+++ b/drivers/iio/light/st_uvis25_core.c
@@ -325,7 +325,7 @@ int st_uvis25_probe(struct device *dev, int irq, struct regmap *regmap)
}
EXPORT_SYMBOL_NS(st_uvis25_probe, IIO_UVIS25);
-static int __maybe_unused st_uvis25_suspend(struct device *dev)
+static int st_uvis25_suspend(struct device *dev)
{
struct iio_dev *iio_dev = dev_get_drvdata(dev);
struct st_uvis25_hw *hw = iio_priv(iio_dev);
@@ -334,7 +334,7 @@ static int __maybe_unused st_uvis25_suspend(struct device *dev)
ST_UVIS25_REG_ODR_MASK, 0);
}
-static int __maybe_unused st_uvis25_resume(struct device *dev)
+static int st_uvis25_resume(struct device *dev)
{
struct iio_dev *iio_dev = dev_get_drvdata(dev);
struct st_uvis25_hw *hw = iio_priv(iio_dev);
@@ -346,10 +346,7 @@ static int __maybe_unused st_uvis25_resume(struct device *dev)
return 0;
}
-const struct dev_pm_ops st_uvis25_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(st_uvis25_suspend, st_uvis25_resume)
-};
-EXPORT_SYMBOL_NS(st_uvis25_pm_ops, IIO_UVIS25);
+EXPORT_NS_SIMPLE_DEV_PM_OPS(st_uvis25_pm_ops, st_uvis25_suspend, st_uvis25_resume, IIO_UVIS25);
MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>");
MODULE_DESCRIPTION("STMicroelectronics uvis25 sensor driver");
diff --git a/drivers/iio/light/st_uvis25_i2c.c b/drivers/iio/light/st_uvis25_i2c.c
index b06d09af28a3..c982b0b255cf 100644
--- a/drivers/iio/light/st_uvis25_i2c.c
+++ b/drivers/iio/light/st_uvis25_i2c.c
@@ -55,7 +55,7 @@ MODULE_DEVICE_TABLE(i2c, st_uvis25_i2c_id_table);
static struct i2c_driver st_uvis25_driver = {
.driver = {
.name = "st_uvis25_i2c",
- .pm = &st_uvis25_pm_ops,
+ .pm = pm_sleep_ptr(&st_uvis25_pm_ops),
.of_match_table = st_uvis25_i2c_of_match,
},
.probe = st_uvis25_i2c_probe,
diff --git a/drivers/iio/light/st_uvis25_spi.c b/drivers/iio/light/st_uvis25_spi.c
index 3a4dc6d7180c..86a232320d7d 100644
--- a/drivers/iio/light/st_uvis25_spi.c
+++ b/drivers/iio/light/st_uvis25_spi.c
@@ -55,7 +55,7 @@ MODULE_DEVICE_TABLE(spi, st_uvis25_spi_id_table);
static struct spi_driver st_uvis25_driver = {
.driver = {
.name = "st_uvis25_spi",
- .pm = &st_uvis25_pm_ops,
+ .pm = pm_sleep_ptr(&st_uvis25_pm_ops),
.of_match_table = st_uvis25_spi_of_match,
},
.probe = st_uvis25_spi_probe,
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 07eb619bcfe8..b91fc5e6a26e 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -216,8 +216,8 @@ config YAMAHA_YAS530
select IIO_TRIGGERED_BUFFER
help
Say Y here to add support for the Yamaha YAS530 series of
- 3-Axis Magnetometers. Right now YAS530, YAS532 and YAS533 are
- fully supported.
+ 3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are
+ supported.
This driver can also be compiled as a module.
To compile this driver as a module, choose M here: the module
diff --git a/drivers/iio/magnetometer/hmc5843.h b/drivers/iio/magnetometer/hmc5843.h
index 9120c8bbf3dd..60fbb5431c88 100644
--- a/drivers/iio/magnetometer/hmc5843.h
+++ b/drivers/iio/magnetometer/hmc5843.h
@@ -52,16 +52,5 @@ int hmc5843_common_probe(struct device *dev, struct regmap *regmap,
enum hmc5843_ids id, const char *name);
void hmc5843_common_remove(struct device *dev);
-int hmc5843_common_suspend(struct device *dev);
-int hmc5843_common_resume(struct device *dev);
-
-#ifdef CONFIG_PM_SLEEP
-static __maybe_unused SIMPLE_DEV_PM_OPS(hmc5843_pm_ops,
- hmc5843_common_suspend,
- hmc5843_common_resume);
-#define HMC5843_PM_OPS (&hmc5843_pm_ops)
-#else
-#define HMC5843_PM_OPS NULL
-#endif
-
+extern const struct dev_pm_ops hmc5843_pm_ops;
#endif /* HMC5843_CORE_H */
diff --git a/drivers/iio/magnetometer/hmc5843_core.c b/drivers/iio/magnetometer/hmc5843_core.c
index 4a63b2da9df0..c5521d61da29 100644
--- a/drivers/iio/magnetometer/hmc5843_core.c
+++ b/drivers/iio/magnetometer/hmc5843_core.c
@@ -603,19 +603,19 @@ static const struct iio_info hmc5843_info = {
static const unsigned long hmc5843_scan_masks[] = {0x7, 0};
-int hmc5843_common_suspend(struct device *dev)
+static int hmc5843_common_suspend(struct device *dev)
{
return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)),
HMC5843_MODE_SLEEP);
}
-EXPORT_SYMBOL_NS(hmc5843_common_suspend, IIO_HMC5843);
-int hmc5843_common_resume(struct device *dev)
+static int hmc5843_common_resume(struct device *dev)
{
return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)),
HMC5843_MODE_CONVERSION_CONTINUOUS);
}
-EXPORT_SYMBOL_NS(hmc5843_common_resume, IIO_HMC5843);
+EXPORT_NS_SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, hmc5843_common_suspend,
+ hmc5843_common_resume, IIO_HMC5843);
int hmc5843_common_probe(struct device *dev, struct regmap *regmap,
enum hmc5843_ids id, const char *name)
diff --git a/drivers/iio/magnetometer/hmc5843_i2c.c b/drivers/iio/magnetometer/hmc5843_i2c.c
index fe5e8415b2f2..18a13dd51296 100644
--- a/drivers/iio/magnetometer/hmc5843_i2c.c
+++ b/drivers/iio/magnetometer/hmc5843_i2c.c
@@ -91,7 +91,7 @@ MODULE_DEVICE_TABLE(of, hmc5843_of_match);
static struct i2c_driver hmc5843_driver = {
.driver = {
.name = "hmc5843",
- .pm = HMC5843_PM_OPS,
+ .pm = pm_sleep_ptr(&hmc5843_pm_ops),
.of_match_table = hmc5843_of_match,
},
.id_table = hmc5843_id,
diff --git a/drivers/iio/magnetometer/hmc5843_spi.c b/drivers/iio/magnetometer/hmc5843_spi.c
index 8403f09aba39..c42d2e2a6a6c 100644
--- a/drivers/iio/magnetometer/hmc5843_spi.c
+++ b/drivers/iio/magnetometer/hmc5843_spi.c
@@ -86,13 +86,13 @@ static const struct spi_device_id hmc5843_id[] = {
MODULE_DEVICE_TABLE(spi, hmc5843_id);
static struct spi_driver hmc5843_driver = {
- .driver = {
- .name = "hmc5843",
- .pm = HMC5843_PM_OPS,
- },
- .id_table = hmc5843_id,
- .probe = hmc5843_spi_probe,
- .remove = hmc5843_spi_remove,
+ .driver = {
+ .name = "hmc5843",
+ .pm = pm_sleep_ptr(&hmc5843_pm_ops),
+ },
+ .id_table = hmc5843_id,
+ .probe = hmc5843_spi_probe,
+ .remove = hmc5843_spi_remove,
};
module_spi_driver(hmc5843_driver);
diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c
index c3a10942654e..801c760feb4d 100644
--- a/drivers/iio/magnetometer/yamaha-yas530.c
+++ b/drivers/iio/magnetometer/yamaha-yas530.c
@@ -10,13 +10,16 @@
* (YAS534 is a magnetic switch, not handled)
* YAS535 MS-6C
* YAS536 MS-3W
- * YAS537 MS-3T (2015 Samsung Galaxy S6, Note 5, Xiaomi)
+ * YAS537 MS-3T (2015 Samsung Galaxy S6, Note 5, Galaxy S7)
* YAS539 MS-3S (2018 Samsung Galaxy A7 SM-A750FN)
*
* Code functions found in the MPU3050 YAS530 and YAS532 drivers
* named "inv_compass" in the Tegra Android kernel tree.
* Copyright (C) 2012 InvenSense Corporation
*
+ * Code functions for YAS537 based on Yamaha Android kernel driver.
+ * Copyright (c) 2014 Yamaha Corporation
+ *
* Author: Linus Walleij <linus.walleij@linaro.org>
*/
#include <linux/bitfield.h>
@@ -29,9 +32,11 @@
#include <linux/mod_devicetable.h>
#include <linux/mutex.h>
#include <linux/pm_runtime.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/random.h>
+#include <linux/units.h>
#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
@@ -40,20 +45,39 @@
#include <asm/unaligned.h>
-/* This register map covers YAS530 and YAS532 but differs in YAS 537 and YAS539 */
+/* Commonly used registers */
#define YAS5XX_DEVICE_ID 0x80
-#define YAS5XX_ACTUATE_INIT_COIL 0x81
-#define YAS5XX_MEASURE 0x82
-#define YAS5XX_CONFIG 0x83
-#define YAS5XX_MEASURE_INTERVAL 0x84
-#define YAS5XX_OFFSET_X 0x85 /* [-31 .. 31] */
-#define YAS5XX_OFFSET_Y1 0x86 /* [-31 .. 31] */
-#define YAS5XX_OFFSET_Y2 0x87 /* [-31 .. 31] */
-#define YAS5XX_TEST1 0x88
-#define YAS5XX_TEST2 0x89
-#define YAS5XX_CAL 0x90
#define YAS5XX_MEASURE_DATA 0xB0
+/* These registers are used by YAS530, YAS532 and YAS533 */
+#define YAS530_ACTUATE_INIT_COIL 0x81
+#define YAS530_MEASURE 0x82
+#define YAS530_CONFIG 0x83
+#define YAS530_MEASURE_INTERVAL 0x84
+#define YAS530_OFFSET_X 0x85 /* [-31 .. 31] */
+#define YAS530_OFFSET_Y1 0x86 /* [-31 .. 31] */
+#define YAS530_OFFSET_Y2 0x87 /* [-31 .. 31] */
+#define YAS530_TEST1 0x88
+#define YAS530_TEST2 0x89
+#define YAS530_CAL 0x90
+
+/* Registers used by YAS537 */
+#define YAS537_MEASURE 0x81 /* Originally YAS537_REG_CMDR */
+#define YAS537_CONFIG 0x82 /* Originally YAS537_REG_CONFR */
+#define YAS537_MEASURE_INTERVAL 0x83 /* Originally YAS537_REG_INTRVLR */
+#define YAS537_OFFSET_X 0x84 /* Originally YAS537_REG_OXR */
+#define YAS537_OFFSET_Y1 0x85 /* Originally YAS537_REG_OY1R */
+#define YAS537_OFFSET_Y2 0x86 /* Originally YAS537_REG_OY2R */
+#define YAS537_AVR 0x87
+#define YAS537_HCK 0x88
+#define YAS537_LCK 0x89
+#define YAS537_SRST 0x90
+#define YAS537_ADCCAL 0x91
+#define YAS537_MTC 0x93
+#define YAS537_OC 0x9E
+#define YAS537_TRM 0x9F
+#define YAS537_CAL 0xC0
+
/* Bits in the YAS5xx config register */
#define YAS5XX_CONFIG_INTON BIT(0) /* Interrupt on? */
#define YAS5XX_CONFIG_INTHACT BIT(1) /* Interrupt active high? */
@@ -65,6 +89,7 @@
#define YAS5XX_MEASURE_LDTC BIT(1)
#define YAS5XX_MEASURE_FORS BIT(2)
#define YAS5XX_MEASURE_DLYMES BIT(4)
+#define YAS5XX_MEASURE_CONT BIT(5)
/* Bits in the measure data register */
#define YAS5XX_MEASURE_DATA_BUSY BIT(7)
@@ -88,33 +113,101 @@
#define YAS532_DATA_BITS 13
#define YAS532_DATA_CENTER BIT(YAS532_DATA_BITS - 1)
#define YAS532_DATA_OVERFLOW (BIT(YAS532_DATA_BITS) - 1)
-#define YAS532_20DEGREES 390 /* Looks like Kelvin */
-/* These variant IDs are known from code dumps */
#define YAS537_DEVICE_ID 0x07 /* YAS537 (MS-3T) */
-#define YAS539_DEVICE_ID 0x08 /* YAS539 (MS-3S) */
+#define YAS537_VERSION_0 0 /* Version naming unknown */
+#define YAS537_VERSION_1 1 /* Version naming unknown */
+#define YAS537_MAG_AVERAGE_32_MASK GENMASK(6, 4)
+#define YAS537_MEASURE_TIME_WORST_US 1500
+#define YAS537_DEFAULT_SENSOR_DELAY_MS 50
+#define YAS537_MAG_RCOIL_TIME_US 65
+#define YAS537_MTC3_MASK_PREP GENMASK(7, 0)
+#define YAS537_MTC3_MASK_GET GENMASK(7, 5)
+#define YAS537_MTC3_ADD_BIT BIT(4)
+#define YAS537_HCK_MASK_PREP GENMASK(4, 0)
+#define YAS537_HCK_MASK_GET GENMASK(7, 4)
+#define YAS537_LCK_MASK_PREP GENMASK(4, 0)
+#define YAS537_LCK_MASK_GET GENMASK(3, 0)
+#define YAS537_OC_MASK_GET GENMASK(5, 0)
/* Turn off device regulators etc after 5 seconds of inactivity */
#define YAS5XX_AUTOSUSPEND_DELAY_MS 5000
+enum chip_ids {
+ yas530,
+ yas532,
+ yas533,
+ yas537,
+};
+
+static const int yas530_volatile_reg[] = {
+ YAS530_ACTUATE_INIT_COIL,
+ YAS530_MEASURE,
+};
+
+static const int yas537_volatile_reg[] = {
+ YAS537_MEASURE,
+};
+
struct yas5xx_calibration {
/* Linearization calibration x, y1, y2 */
s32 r[3];
u32 f[3];
/* Temperature compensation calibration */
- s32 Cx, Cy1, Cy2;
+ s16 Cx, Cy1, Cy2;
/* Misc calibration coefficients */
- s32 a2, a3, a4, a5, a6, a7, a8, a9, k;
+ s8 a2, a3, a4, a6, a7, a8;
+ s16 a5, a9;
+ u8 k;
/* clock divider */
u8 dck;
};
+struct yas5xx;
+
+/**
+ * struct yas5xx_chip_info - device-specific data and function pointers
+ * @devid: device ID number
+ * @product_name: product name of the YAS variant
+ * @version_names: version letters or namings
+ * @volatile_reg: device-specific volatile registers
+ * @volatile_reg_qty: quantity of device-specific volatile registers
+ * @scaling_val2: scaling value for IIO_CHAN_INFO_SCALE
+ * @t_ref: number of counts at reference temperature 20 °C
+ * @min_temp_x10: starting point of temperature counting in 1/10:s degrees Celsius
+ * @get_measure: function pointer to get a measurement
+ * @get_calibration_data: function pointer to get calibration data
+ * @dump_calibration: function pointer to dump calibration for debugging
+ * @measure_offsets: function pointer to measure the offsets
+ * @power_on: function pointer to power-on procedure
+ *
+ * The "t_ref" value for YAS532/533 is known from the Android driver.
+ * For YAS530 and YAS537 it was approximately measured.
+ *
+ * The temperatures "min_temp_x10" are derived from the temperature resolutions
+ * given in the data sheets.
+ */
+struct yas5xx_chip_info {
+ unsigned int devid;
+ const char *product_name;
+ const char *version_names[2];
+ const int *volatile_reg;
+ int volatile_reg_qty;
+ u32 scaling_val2;
+ u16 t_ref;
+ s16 min_temp_x10;
+ int (*get_measure)(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo);
+ int (*get_calibration_data)(struct yas5xx *yas5xx);
+ void (*dump_calibration)(struct yas5xx *yas5xx);
+ int (*measure_offsets)(struct yas5xx *yas5xx);
+ int (*power_on)(struct yas5xx *yas5xx);
+};
+
/**
* struct yas5xx - state container for the YAS5xx driver
* @dev: parent device pointer
- * @devid: device ID number
+ * @chip_info: device-specific data and function pointers
* @version: device version
- * @name: device name
* @calibration: calibration settings from the OTP storage
* @hard_offsets: offsets for each axis measured with initcoil actuated
* @orientation: mounting matrix, flipped axis etc
@@ -128,11 +221,10 @@ struct yas5xx_calibration {
*/
struct yas5xx {
struct device *dev;
- unsigned int devid;
+ const struct yas5xx_chip_info *chip_info;
unsigned int version;
- char name[16];
struct yas5xx_calibration calibration;
- u8 hard_offsets[3];
+ s8 hard_offsets[3];
struct iio_mount_matrix orientation;
struct regmap *map;
struct regulator_bulk_data regs[2];
@@ -179,23 +271,26 @@ static u16 yas532_extract_axis(u8 *data)
}
/**
- * yas5xx_measure() - Make a measure from the hardware
+ * yas530_measure() - Make a measure from the hardware
* @yas5xx: The device state
* @t: the raw temperature measurement
* @x: the raw x axis measurement
* @y1: the y1 axis measurement
* @y2: the y2 axis measurement
* @return: 0 on success or error code
+ *
+ * Used by YAS530, YAS532 and YAS533.
*/
-static int yas5xx_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2)
+static int yas530_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2)
{
+ const struct yas5xx_chip_info *ci = yas5xx->chip_info;
unsigned int busy;
u8 data[8];
int ret;
u16 val;
mutex_lock(&yas5xx->lock);
- ret = regmap_write(yas5xx->map, YAS5XX_MEASURE, YAS5XX_MEASURE_START);
+ ret = regmap_write(yas5xx->map, YAS530_MEASURE, YAS5XX_MEASURE_START);
if (ret < 0)
goto out_unlock;
@@ -219,7 +314,7 @@ static int yas5xx_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y
mutex_unlock(&yas5xx->lock);
- switch (yas5xx->devid) {
+ switch (ci->devid) {
case YAS530_DEVICE_ID:
/*
* The t value is 9 bits in big endian format
@@ -261,8 +356,81 @@ out_unlock:
return ret;
}
-static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis)
+/**
+ * yas537_measure() - Make a measure from the hardware
+ * @yas5xx: The device state
+ * @t: the raw temperature measurement
+ * @x: the raw x axis measurement
+ * @y1: the y1 axis measurement
+ * @y2: the y2 axis measurement
+ * @return: 0 on success or error code
+ */
+static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y2)
+{
+ struct yas5xx_calibration *c = &yas5xx->calibration;
+ unsigned int busy;
+ u8 data[8];
+ u16 xy1y2[3];
+ s32 h[3], s[3];
+ int i, ret;
+
+ mutex_lock(&yas5xx->lock);
+
+ /* Contrary to YAS530/532, also a "cont" bit is set, meaning unknown */
+ ret = regmap_write(yas5xx->map, YAS537_MEASURE, YAS5XX_MEASURE_START |
+ YAS5XX_MEASURE_CONT);
+ if (ret < 0)
+ goto out_unlock;
+
+ /* Use same timeout like YAS530/532 but the bit is in data row 2 */
+ ret = regmap_read_poll_timeout(yas5xx->map, YAS5XX_MEASURE_DATA + 2, busy,
+ !(busy & YAS5XX_MEASURE_DATA_BUSY),
+ 500, 20000);
+ if (ret) {
+ dev_err(yas5xx->dev, "timeout waiting for measurement\n");
+ goto out_unlock;
+ }
+
+ ret = regmap_bulk_read(yas5xx->map, YAS5XX_MEASURE_DATA,
+ data, sizeof(data));
+ if (ret)
+ goto out_unlock;
+
+ mutex_unlock(&yas5xx->lock);
+
+ *t = get_unaligned_be16(&data[0]);
+ xy1y2[0] = FIELD_GET(GENMASK(13, 0), get_unaligned_be16(&data[2]));
+ xy1y2[1] = get_unaligned_be16(&data[4]);
+ xy1y2[2] = get_unaligned_be16(&data[6]);
+
+ /* The second version of YAS537 needs to include calibration coefficients */
+ if (yas5xx->version == YAS537_VERSION_1) {
+ for (i = 0; i < 3; i++)
+ s[i] = xy1y2[i] - BIT(13);
+ h[0] = (c->k * (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / BIT(13);
+ h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / BIT(13);
+ h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / BIT(13);
+ for (i = 0; i < 3; i++) {
+ clamp_val(h[i], -BIT(13), BIT(13) - 1);
+ xy1y2[i] = h[i] + BIT(13);
+ }
+ }
+
+ *x = xy1y2[0];
+ *y1 = xy1y2[1];
+ *y2 = xy1y2[2];
+
+ return 0;
+
+out_unlock:
+ mutex_unlock(&yas5xx->lock);
+ return ret;
+}
+
+/* Used by YAS530, YAS532 and YAS533 */
+static s32 yas530_linearize(struct yas5xx *yas5xx, u16 val, int axis)
{
+ const struct yas5xx_chip_info *ci = yas5xx->chip_info;
struct yas5xx_calibration *c = &yas5xx->calibration;
static const s32 yas532ac_coef[] = {
YAS532_VERSION_AC_COEF_X,
@@ -272,7 +440,7 @@ static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis)
s32 coef;
/* Select coefficients */
- switch (yas5xx->devid) {
+ switch (ci->devid) {
case YAS530_DEVICE_ID:
if (yas5xx->version == YAS530_VERSION_A)
coef = YAS530_VERSION_A_COEF;
@@ -302,8 +470,24 @@ static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis)
(yas5xx->hard_offsets[axis] - c->r[axis]) * coef;
}
+static s32 yas5xx_calc_temperature(struct yas5xx *yas5xx, u16 t)
+{
+ const struct yas5xx_chip_info *ci = yas5xx->chip_info;
+ s32 to;
+ u16 t_ref;
+ s16 min_temp_x10;
+ int ref_temp_x10;
+
+ t_ref = ci->t_ref;
+ min_temp_x10 = ci->min_temp_x10;
+ ref_temp_x10 = 200;
+
+ to = (min_temp_x10 + ((ref_temp_x10 - min_temp_x10) * t / t_ref)) * 100;
+ return to;
+}
+
/**
- * yas5xx_get_measure() - Measure a sample of all axis and process
+ * yas530_get_measure() - Measure a sample of all axis and process
* @yas5xx: The device state
* @to: Temperature out
* @xo: X axis out
@@ -311,36 +495,50 @@ static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis)
* @zo: Z axis out
* @return: 0 on success or error code
*
- * Returned values are in nanotesla according to some code.
+ * Used by YAS530, YAS532 and YAS533.
*/
-static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo)
+static int yas530_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo)
{
+ const struct yas5xx_chip_info *ci = yas5xx->chip_info;
struct yas5xx_calibration *c = &yas5xx->calibration;
- u16 t, x, y1, y2;
- /* These are "signed x, signed y1 etc */
+ u16 t_ref, t_comp, t, x, y1, y2;
+ /* These are signed x, signed y1 etc */
s32 sx, sy1, sy2, sy, sz;
int ret;
/* We first get raw data that needs to be translated to [x,y,z] */
- ret = yas5xx_measure(yas5xx, &t, &x, &y1, &y2);
+ ret = yas530_measure(yas5xx, &t, &x, &y1, &y2);
if (ret)
return ret;
/* Do some linearization if available */
- sx = yas5xx_linearize(yas5xx, x, 0);
- sy1 = yas5xx_linearize(yas5xx, y1, 1);
- sy2 = yas5xx_linearize(yas5xx, y2, 2);
+ sx = yas530_linearize(yas5xx, x, 0);
+ sy1 = yas530_linearize(yas5xx, y1, 1);
+ sy2 = yas530_linearize(yas5xx, y2, 2);
+
+ /*
+ * Set the temperature for compensation (unit: counts):
+ * YAS532/YAS533 version AC uses the temperature deviation as a
+ * multiplier. YAS530 and YAS532 version AB use solely the t value.
+ */
+ t_ref = ci->t_ref;
+ if (ci->devid == YAS532_DEVICE_ID &&
+ yas5xx->version == YAS532_VERSION_AC) {
+ t_comp = t - t_ref;
+ } else {
+ t_comp = t;
+ }
/*
* Temperature compensation for x, y1, y2 respectively:
*
- * Cx * t
- * x' = x - ------
- * 100
+ * Cx * t_comp
+ * x' = x - -----------
+ * 100
*/
- sx = sx - (c->Cx * t) / 100;
- sy1 = sy1 - (c->Cy1 * t) / 100;
- sy2 = sy2 - (c->Cy2 * t) / 100;
+ sx = sx - (c->Cx * t_comp) / 100;
+ sy1 = sy1 - (c->Cy1 * t_comp) / 100;
+ sy2 = sy2 - (c->Cy2 * t_comp) / 100;
/*
* Break y1 and y2 into y and z, y1 and y2 are apparently encoding
@@ -349,11 +547,9 @@ static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo,
sy = sy1 - sy2;
sz = -sy1 - sy2;
- /*
- * FIXME: convert to Celsius? Just guessing this is given
- * as 1/10:s of degrees so multiply by 100 to get millicentigrades.
- */
- *to = t * 100;
+ /* Calculate temperature readout */
+ *to = yas5xx_calc_temperature(yas5xx, t);
+
/*
* Calibrate [x,y,z] with some formulas like this:
*
@@ -376,19 +572,56 @@ static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo,
return 0;
}
+/**
+ * yas537_get_measure() - Measure a sample of all axis and process
+ * @yas5xx: The device state
+ * @to: Temperature out
+ * @xo: X axis out
+ * @yo: Y axis out
+ * @zo: Z axis out
+ * @return: 0 on success or error code
+ */
+static int yas537_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo)
+{
+ u16 t, x, y1, y2;
+ int ret;
+
+ /* We first get raw data that needs to be translated to [x,y,z] */
+ ret = yas537_measure(yas5xx, &t, &x, &y1, &y2);
+ if (ret)
+ return ret;
+
+ /* Calculate temperature readout */
+ *to = yas5xx_calc_temperature(yas5xx, t);
+
+ /*
+ * Unfortunately, no linearization or temperature compensation formulas
+ * are known for YAS537.
+ */
+
+ /* Calculate x, y, z from x, y1, y2 */
+ *xo = (x - BIT(13)) * 300;
+ *yo = (y1 - y2) * 1732 / 10;
+ *zo = (-y1 - y2 + BIT(14)) * 300;
+
+ return 0;
+}
+
static int yas5xx_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2,
long mask)
{
struct yas5xx *yas5xx = iio_priv(indio_dev);
+ const struct yas5xx_chip_info *ci = yas5xx->chip_info;
s32 t, x, y, z;
int ret;
switch (mask) {
+ case IIO_CHAN_INFO_PROCESSED:
case IIO_CHAN_INFO_RAW:
pm_runtime_get_sync(yas5xx->dev);
- ret = yas5xx_get_measure(yas5xx, &t, &x, &y, &z);
+ ret = ci->get_measure(yas5xx, &t, &x, &y, &z);
pm_runtime_mark_last_busy(yas5xx->dev);
pm_runtime_put_autosuspend(yas5xx->dev);
if (ret)
@@ -412,19 +645,8 @@ static int yas5xx_read_raw(struct iio_dev *indio_dev,
}
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
- if (chan->address == 0) {
- /* Temperature is unscaled */
- *val = 1;
- return IIO_VAL_INT;
- }
- /*
- * The axis values are in nanotesla according to the vendor
- * drivers, but is clearly in microtesla according to
- * experiments. Since 1 uT = 0.01 Gauss, we need to divide
- * by 100000000 (10^8) to get to Gauss from the raw value.
- */
*val = 1;
- *val2 = 100000000;
+ *val2 = ci->scaling_val2;
return IIO_VAL_FRACTIONAL;
default:
/* Unknown request */
@@ -435,11 +657,12 @@ static int yas5xx_read_raw(struct iio_dev *indio_dev,
static void yas5xx_fill_buffer(struct iio_dev *indio_dev)
{
struct yas5xx *yas5xx = iio_priv(indio_dev);
+ const struct yas5xx_chip_info *ci = yas5xx->chip_info;
s32 t, x, y, z;
int ret;
pm_runtime_get_sync(yas5xx->dev);
- ret = yas5xx_get_measure(yas5xx, &t, &x, &y, &z);
+ ret = ci->get_measure(yas5xx, &t, &x, &y, &z);
pm_runtime_mark_last_busy(yas5xx->dev);
pm_runtime_put_autosuspend(yas5xx->dev);
if (ret) {
@@ -505,7 +728,7 @@ static const struct iio_chan_spec yas5xx_channels[] = {
.address = 0,
.scan_index = 0,
.scan_type = {
- .sign = 'u',
+ .sign = 's',
.realbits = 32,
.storagebits = 32,
.endianness = IIO_CPU,
@@ -525,9 +748,26 @@ static const struct iio_info yas5xx_info = {
static bool yas5xx_volatile_reg(struct device *dev, unsigned int reg)
{
- return reg == YAS5XX_ACTUATE_INIT_COIL ||
- reg == YAS5XX_MEASURE ||
- (reg >= YAS5XX_MEASURE_DATA && reg <= YAS5XX_MEASURE_DATA + 8);
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct yas5xx *yas5xx = iio_priv(indio_dev);
+ const struct yas5xx_chip_info *ci = yas5xx->chip_info;
+ int reg_qty;
+ int i;
+
+ if (reg >= YAS5XX_MEASURE_DATA && reg < YAS5XX_MEASURE_DATA + 8)
+ return true;
+
+ /*
+ * YAS versions share different registers on the same address,
+ * need to differentiate.
+ */
+ reg_qty = ci->volatile_reg_qty;
+ for (i = 0; i < reg_qty; i++) {
+ if (reg == ci->volatile_reg[i])
+ return true;
+ }
+
+ return false;
}
/* TODO: enable regmap cache, using mark dirty and sync at runtime resume */
@@ -539,11 +779,13 @@ static const struct regmap_config yas5xx_regmap_config = {
};
/**
- * yas53x_extract_calibration() - extracts the a2-a9 and k calibration
+ * yas530_extract_calibration() - extracts the a2-a9 and k calibration
* @data: the bitfield to use
* @c: the calibration to populate
+ *
+ * Used by YAS530, YAS532 and YAS533.
*/
-static void yas53x_extract_calibration(u8 *data, struct yas5xx_calibration *c)
+static void yas530_extract_calibration(u8 *data, struct yas5xx_calibration *c)
{
u64 val = get_unaligned_be64(data);
@@ -581,24 +823,27 @@ static int yas530_get_calibration_data(struct yas5xx *yas5xx)
int ret;
/* Dummy read, first read is ALWAYS wrong */
- ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data));
+ ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data));
if (ret)
return ret;
/* Actual calibration readout */
- ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data));
+ ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data));
if (ret)
return ret;
- dev_dbg(yas5xx->dev, "calibration data: %*ph\n", 14, data);
+ dev_dbg(yas5xx->dev, "calibration data: %16ph\n", data);
+ /* Contribute calibration data to the input pool for kernel entropy */
add_device_randomness(data, sizeof(data));
+
+ /* Extract version */
yas5xx->version = data[15] & GENMASK(1, 0);
/* Extract the calibration from the bitfield */
c->Cx = data[0] * 6 - 768;
c->Cy1 = data[1] * 6 - 768;
c->Cy2 = data[2] * 6 - 768;
- yas53x_extract_calibration(&data[3], c);
+ yas530_extract_calibration(&data[3], c);
/*
* Extract linearization:
@@ -618,6 +863,7 @@ static int yas530_get_calibration_data(struct yas5xx *yas5xx)
c->r[0] = sign_extend32(FIELD_GET(GENMASK(28, 23), val), 5);
c->r[1] = sign_extend32(FIELD_GET(GENMASK(20, 15), val), 5);
c->r[2] = sign_extend32(FIELD_GET(GENMASK(12, 7), val), 5);
+
return 0;
}
@@ -629,22 +875,22 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx)
int ret;
/* Dummy read, first read is ALWAYS wrong */
- ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data));
+ ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data));
if (ret)
return ret;
/* Actual calibration readout */
- ret = regmap_bulk_read(yas5xx->map, YAS5XX_CAL, data, sizeof(data));
+ ret = regmap_bulk_read(yas5xx->map, YAS530_CAL, data, sizeof(data));
if (ret)
return ret;
- dev_dbg(yas5xx->dev, "calibration data: %*ph\n", 14, data);
+ dev_dbg(yas5xx->dev, "calibration data: %14ph\n", data);
/* Sanity check, is this all zeroes? */
- if (memchr_inv(data, 0x00, 13) == NULL) {
- if (!(data[13] & BIT(7)))
- dev_warn(yas5xx->dev, "calibration is blank!\n");
- }
+ if (!memchr_inv(data, 0x00, 13) && !(data[13] & BIT(7)))
+ dev_warn(yas5xx->dev, "calibration is blank!\n");
+ /* Contribute calibration data to the input pool for kernel entropy */
add_device_randomness(data, sizeof(data));
+
/* Only one bit of version info reserved here as far as we know */
yas5xx->version = data[13] & BIT(0);
@@ -652,7 +898,8 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx)
c->Cx = data[0] * 10 - 1280;
c->Cy1 = data[1] * 10 - 1280;
c->Cy2 = data[2] * 10 - 1280;
- yas53x_extract_calibration(&data[3], c);
+ yas530_extract_calibration(&data[3], c);
+
/*
* Extract linearization:
* Linearization layout in the 32 bits at byte 10:
@@ -675,7 +922,204 @@ static int yas532_get_calibration_data(struct yas5xx *yas5xx)
return 0;
}
-static void yas5xx_dump_calibration(struct yas5xx *yas5xx)
+static int yas537_get_calibration_data(struct yas5xx *yas5xx)
+{
+ struct yas5xx_calibration *c = &yas5xx->calibration;
+ u8 data[17];
+ u32 val1, val2, val3, val4;
+ int i, ret;
+
+ /* Writing SRST register */
+ ret = regmap_write(yas5xx->map, YAS537_SRST, BIT(1));
+ if (ret)
+ return ret;
+
+ /* Calibration readout, YAS537 needs one readout only */
+ ret = regmap_bulk_read(yas5xx->map, YAS537_CAL, data, sizeof(data));
+ if (ret)
+ return ret;
+ dev_dbg(yas5xx->dev, "calibration data: %17ph\n", data);
+
+ /* Sanity check, is this all zeroes? */
+ if (!memchr_inv(data, 0x00, 16) && !FIELD_GET(GENMASK(5, 0), data[16]))
+ dev_warn(yas5xx->dev, "calibration is blank!\n");
+
+ /* Contribute calibration data to the input pool for kernel entropy */
+ add_device_randomness(data, sizeof(data));
+
+ /* Extract version information */
+ yas5xx->version = FIELD_GET(GENMASK(7, 6), data[16]);
+
+ /* There are two versions of YAS537 behaving differently */
+ switch (yas5xx->version) {
+ case YAS537_VERSION_0:
+ /*
+ * The first version simply writes data back into registers:
+ *
+ * data[0] YAS537_MTC 0x93
+ * data[1] 0x94
+ * data[2] 0x95
+ * data[3] 0x96
+ * data[4] 0x97
+ * data[5] 0x98
+ * data[6] 0x99
+ * data[7] 0x9a
+ * data[8] 0x9b
+ * data[9] 0x9c
+ * data[10] 0x9d
+ * data[11] YAS537_OC 0x9e
+ *
+ * data[12] YAS537_OFFSET_X 0x84
+ * data[13] YAS537_OFFSET_Y1 0x85
+ * data[14] YAS537_OFFSET_Y2 0x86
+ *
+ * data[15] YAS537_HCK 0x88
+ * data[16] YAS537_LCK 0x89
+ */
+ for (i = 0; i < 12; i++) {
+ ret = regmap_write(yas5xx->map, YAS537_MTC + i,
+ data[i]);
+ if (ret)
+ return ret;
+ }
+ for (i = 0; i < 3; i++) {
+ ret = regmap_write(yas5xx->map, YAS537_OFFSET_X + i,
+ data[i + 12]);
+ if (ret)
+ return ret;
+ yas5xx->hard_offsets[i] = data[i + 12];
+ }
+ for (i = 0; i < 2; i++) {
+ ret = regmap_write(yas5xx->map, YAS537_HCK + i,
+ data[i + 15]);
+ if (ret)
+ return ret;
+ }
+ break;
+ case YAS537_VERSION_1:
+ /*
+ * The second version writes some data into registers but also
+ * extracts calibration coefficients.
+ *
+ * Registers being written:
+ *
+ * data[0] YAS537_MTC 0x93
+ * data[1] YAS537_MTC+1 0x94
+ * data[2] YAS537_MTC+2 0x95
+ * data[3] YAS537_MTC+3 (partially) 0x96
+ *
+ * data[12] YAS537_OFFSET_X 0x84
+ * data[13] YAS537_OFFSET_Y1 0x85
+ * data[14] YAS537_OFFSET_Y2 0x86
+ *
+ * data[15] YAS537_HCK (partially) 0x88
+ * YAS537_LCK (partially) 0x89
+ * data[16] YAS537_OC (partially) 0x9e
+ */
+ for (i = 0; i < 3; i++) {
+ ret = regmap_write(yas5xx->map, YAS537_MTC + i,
+ data[i]);
+ if (ret)
+ return ret;
+ }
+ for (i = 0; i < 3; i++) {
+ ret = regmap_write(yas5xx->map, YAS537_OFFSET_X + i,
+ data[i + 12]);
+ if (ret)
+ return ret;
+ yas5xx->hard_offsets[i] = data[i + 12];
+ }
+ /*
+ * Visualization of partially taken data:
+ *
+ * data[3] n 7 6 5 4 3 2 1 0
+ * YAS537_MTC+3 x x x 1 0 0 0 0
+ *
+ * data[15] n 7 6 5 4 3 2 1 0
+ * YAS537_HCK x x x x 0
+ *
+ * data[15] n 7 6 5 4 3 2 1 0
+ * YAS537_LCK x x x x 0
+ *
+ * data[16] n 7 6 5 4 3 2 1 0
+ * YAS537_OC x x x x x x
+ */
+ ret = regmap_write(yas5xx->map, YAS537_MTC + 3,
+ FIELD_PREP(YAS537_MTC3_MASK_PREP,
+ FIELD_GET(YAS537_MTC3_MASK_GET, data[3])) |
+ YAS537_MTC3_ADD_BIT);
+ if (ret)
+ return ret;
+ ret = regmap_write(yas5xx->map, YAS537_HCK,
+ FIELD_PREP(YAS537_HCK_MASK_PREP,
+ FIELD_GET(YAS537_HCK_MASK_GET, data[15])));
+ if (ret)
+ return ret;
+ ret = regmap_write(yas5xx->map, YAS537_LCK,
+ FIELD_PREP(YAS537_LCK_MASK_PREP,
+ FIELD_GET(YAS537_LCK_MASK_GET, data[15])));
+ if (ret)
+ return ret;
+ ret = regmap_write(yas5xx->map, YAS537_OC,
+ FIELD_GET(YAS537_OC_MASK_GET, data[16]));
+ if (ret)
+ return ret;
+ /*
+ * For data extraction, build some blocks. Four 32-bit blocks
+ * look appropriate.
+ *
+ * n 7 6 5 4 3 2 1 0
+ * data[0] 0 [ Cx Cx Cx Cx Cx Cx Cx Cx ] bits 31 .. 24
+ * data[1] 1 [ Cx C1 C1 C1 C1 C1 C1 C1 ] bits 23 .. 16
+ * data[2] 2 [ C1 C1 C2 C2 C2 C2 C2 C2 ] bits 15 .. 8
+ * data[3] 3 [ C2 C2 C2 ] bits 7 .. 0
+ *
+ * n 7 6 5 4 3 2 1 0
+ * data[3] 0 [ a2 a2 a2 a2 a2 ] bits 31 .. 24
+ * data[4] 1 [ a2 a2 a3 a3 a3 a3 a3 a3 ] bits 23 .. 16
+ * data[5] 2 [ a3 a4 a4 a4 a4 a4 a4 a4 ] bits 15 .. 8
+ * data[6] 3 [ a4 ] bits 7 .. 0
+ *
+ * n 7 6 5 4 3 2 1 0
+ * data[6] 0 [ a5 a5 a5 a5 a5 a5 a5 ] bits 31 .. 24
+ * data[7] 1 [ a5 a5 a6 a6 a6 a6 a6 a6 ] bits 23 .. 16
+ * data[8] 2 [ a6 a7 a7 a7 a7 a7 a7 a7 ] bits 15 .. 8
+ * data[9] 3 [ a7 ] bits 7 .. 0
+ *
+ * n 7 6 5 4 3 2 1 0
+ * data[9] 0 [ a8 a8 a8 a8 a8 a8 a8 ] bits 31 .. 24
+ * data[10] 1 [ a9 a9 a9 a9 a9 a9 a9 a9 ] bits 23 .. 16
+ * data[11] 2 [ a9 k k k k k k k ] bits 15 .. 8
+ * data[12] 3 [ ] bits 7 .. 0
+ */
+ val1 = get_unaligned_be32(&data[0]);
+ val2 = get_unaligned_be32(&data[3]);
+ val3 = get_unaligned_be32(&data[6]);
+ val4 = get_unaligned_be32(&data[9]);
+ /* Extract calibration coefficients and modify */
+ c->Cx = FIELD_GET(GENMASK(31, 23), val1) - 256;
+ c->Cy1 = FIELD_GET(GENMASK(22, 14), val1) - 256;
+ c->Cy2 = FIELD_GET(GENMASK(13, 5), val1) - 256;
+ c->a2 = FIELD_GET(GENMASK(28, 22), val2) - 64;
+ c->a3 = FIELD_GET(GENMASK(21, 15), val2) - 64;
+ c->a4 = FIELD_GET(GENMASK(14, 7), val2) - 128;
+ c->a5 = FIELD_GET(GENMASK(30, 22), val3) - 112;
+ c->a6 = FIELD_GET(GENMASK(21, 15), val3) - 64;
+ c->a7 = FIELD_GET(GENMASK(14, 7), val3) - 128;
+ c->a8 = FIELD_GET(GENMASK(30, 24), val4) - 64;
+ c->a9 = FIELD_GET(GENMASK(23, 15), val4) - 112;
+ c->k = FIELD_GET(GENMASK(14, 8), val4);
+ break;
+ default:
+ dev_err(yas5xx->dev, "unknown version of YAS537\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* Used by YAS530, YAS532 and YAS533 */
+static void yas530_dump_calibration(struct yas5xx *yas5xx)
{
struct yas5xx_calibration *c = &yas5xx->calibration;
@@ -698,20 +1142,42 @@ static void yas5xx_dump_calibration(struct yas5xx *yas5xx)
dev_dbg(yas5xx->dev, "dck = %d\n", c->dck);
}
-static int yas5xx_set_offsets(struct yas5xx *yas5xx, s8 ox, s8 oy1, s8 oy2)
+static void yas537_dump_calibration(struct yas5xx *yas5xx)
+{
+ struct yas5xx_calibration *c = &yas5xx->calibration;
+
+ if (yas5xx->version == YAS537_VERSION_1) {
+ dev_dbg(yas5xx->dev, "Cx = %d\n", c->Cx);
+ dev_dbg(yas5xx->dev, "Cy1 = %d\n", c->Cy1);
+ dev_dbg(yas5xx->dev, "Cy2 = %d\n", c->Cy2);
+ dev_dbg(yas5xx->dev, "a2 = %d\n", c->a2);
+ dev_dbg(yas5xx->dev, "a3 = %d\n", c->a3);
+ dev_dbg(yas5xx->dev, "a4 = %d\n", c->a4);
+ dev_dbg(yas5xx->dev, "a5 = %d\n", c->a5);
+ dev_dbg(yas5xx->dev, "a6 = %d\n", c->a6);
+ dev_dbg(yas5xx->dev, "a7 = %d\n", c->a7);
+ dev_dbg(yas5xx->dev, "a8 = %d\n", c->a8);
+ dev_dbg(yas5xx->dev, "a9 = %d\n", c->a9);
+ dev_dbg(yas5xx->dev, "k = %d\n", c->k);
+ }
+}
+
+/* Used by YAS530, YAS532 and YAS533 */
+static int yas530_set_offsets(struct yas5xx *yas5xx, s8 ox, s8 oy1, s8 oy2)
{
int ret;
- ret = regmap_write(yas5xx->map, YAS5XX_OFFSET_X, ox);
+ ret = regmap_write(yas5xx->map, YAS530_OFFSET_X, ox);
if (ret)
return ret;
- ret = regmap_write(yas5xx->map, YAS5XX_OFFSET_Y1, oy1);
+ ret = regmap_write(yas5xx->map, YAS530_OFFSET_Y1, oy1);
if (ret)
return ret;
- return regmap_write(yas5xx->map, YAS5XX_OFFSET_Y2, oy2);
+ return regmap_write(yas5xx->map, YAS530_OFFSET_Y2, oy2);
}
-static s8 yas5xx_adjust_offset(s8 old, int bit, u16 center, u16 measure)
+/* Used by YAS530, YAS532 and YAS533 */
+static s8 yas530_adjust_offset(s8 old, int bit, u16 center, u16 measure)
{
if (measure > center)
return old + BIT(bit);
@@ -720,8 +1186,10 @@ static s8 yas5xx_adjust_offset(s8 old, int bit, u16 center, u16 measure)
return old;
}
-static int yas5xx_meaure_offsets(struct yas5xx *yas5xx)
+/* Used by YAS530, YAS532 and YAS533 */
+static int yas530_measure_offsets(struct yas5xx *yas5xx)
{
+ const struct yas5xx_chip_info *ci = yas5xx->chip_info;
int ret;
u16 center;
u16 t, x, y1, y2;
@@ -729,12 +1197,12 @@ static int yas5xx_meaure_offsets(struct yas5xx *yas5xx)
int i;
/* Actuate the init coil and measure offsets */
- ret = regmap_write(yas5xx->map, YAS5XX_ACTUATE_INIT_COIL, 0);
+ ret = regmap_write(yas5xx->map, YAS530_ACTUATE_INIT_COIL, 0);
if (ret)
return ret;
/* When the initcoil is active this should be around the center */
- switch (yas5xx->devid) {
+ switch (ci->devid) {
case YAS530_DEVICE_ID:
center = YAS530_DATA_CENTER;
break;
@@ -763,26 +1231,26 @@ static int yas5xx_meaure_offsets(struct yas5xx *yas5xx)
oy2 = 0;
for (i = 4; i >= 0; i--) {
- ret = yas5xx_set_offsets(yas5xx, ox, oy1, oy2);
+ ret = yas530_set_offsets(yas5xx, ox, oy1, oy2);
if (ret)
return ret;
- ret = yas5xx_measure(yas5xx, &t, &x, &y1, &y2);
+ ret = yas530_measure(yas5xx, &t, &x, &y1, &y2);
if (ret)
return ret;
dev_dbg(yas5xx->dev, "measurement %d: x=%d, y1=%d, y2=%d\n",
5-i, x, y1, y2);
- ox = yas5xx_adjust_offset(ox, i, center, x);
- oy1 = yas5xx_adjust_offset(oy1, i, center, y1);
- oy2 = yas5xx_adjust_offset(oy2, i, center, y2);
+ ox = yas530_adjust_offset(ox, i, center, x);
+ oy1 = yas530_adjust_offset(oy1, i, center, y1);
+ oy2 = yas530_adjust_offset(oy2, i, center, y2);
}
/* Needed for calibration algorithm */
yas5xx->hard_offsets[0] = ox;
yas5xx->hard_offsets[1] = oy1;
yas5xx->hard_offsets[2] = oy2;
- ret = yas5xx_set_offsets(yas5xx, ox, oy1, oy2);
+ ret = yas530_set_offsets(yas5xx, ox, oy1, oy2);
if (ret)
return ret;
@@ -791,35 +1259,139 @@ static int yas5xx_meaure_offsets(struct yas5xx *yas5xx)
return 0;
}
-static int yas5xx_power_on(struct yas5xx *yas5xx)
+/* Used by YAS530, YAS532 and YAS533 */
+static int yas530_power_on(struct yas5xx *yas5xx)
{
unsigned int val;
int ret;
/* Zero the test registers */
- ret = regmap_write(yas5xx->map, YAS5XX_TEST1, 0);
+ ret = regmap_write(yas5xx->map, YAS530_TEST1, 0);
if (ret)
return ret;
- ret = regmap_write(yas5xx->map, YAS5XX_TEST2, 0);
+ ret = regmap_write(yas5xx->map, YAS530_TEST2, 0);
if (ret)
return ret;
/* Set up for no interrupts, calibrated clock divider */
val = FIELD_PREP(YAS5XX_CONFIG_CCK_MASK, yas5xx->calibration.dck);
- ret = regmap_write(yas5xx->map, YAS5XX_CONFIG, val);
+ ret = regmap_write(yas5xx->map, YAS530_CONFIG, val);
if (ret)
return ret;
/* Measure interval 0 (back-to-back?) */
- return regmap_write(yas5xx->map, YAS5XX_MEASURE_INTERVAL, 0);
+ return regmap_write(yas5xx->map, YAS530_MEASURE_INTERVAL, 0);
}
+static int yas537_power_on(struct yas5xx *yas5xx)
+{
+ __be16 buf;
+ int ret;
+ u8 intrvl;
+
+ /* Writing ADCCAL and TRM registers */
+ buf = cpu_to_be16(GENMASK(9, 3));
+ ret = regmap_bulk_write(yas5xx->map, YAS537_ADCCAL, &buf, sizeof(buf));
+ if (ret)
+ return ret;
+ ret = regmap_write(yas5xx->map, YAS537_TRM, GENMASK(7, 0));
+ if (ret)
+ return ret;
+
+ /* The interval value is static in regular operation */
+ intrvl = (YAS537_DEFAULT_SENSOR_DELAY_MS * MILLI
+ - YAS537_MEASURE_TIME_WORST_US) / 4100;
+ ret = regmap_write(yas5xx->map, YAS537_MEASURE_INTERVAL, intrvl);
+ if (ret)
+ return ret;
+
+ /* The average value is also static in regular operation */
+ ret = regmap_write(yas5xx->map, YAS537_AVR, YAS537_MAG_AVERAGE_32_MASK);
+ if (ret)
+ return ret;
+
+ /* Perform the "rcoil" part but skip the "last_after_rcoil" read */
+ ret = regmap_write(yas5xx->map, YAS537_CONFIG, BIT(3));
+ if (ret)
+ return ret;
+
+ /* Wait until the coil has ramped up */
+ usleep_range(YAS537_MAG_RCOIL_TIME_US, YAS537_MAG_RCOIL_TIME_US + 100);
+
+ return 0;
+}
+
+static const struct yas5xx_chip_info yas5xx_chip_info_tbl[] = {
+ [yas530] = {
+ .devid = YAS530_DEVICE_ID,
+ .product_name = "YAS530 MS-3E",
+ .version_names = { "A", "B" },
+ .volatile_reg = yas530_volatile_reg,
+ .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg),
+ .scaling_val2 = 100000000, /* picotesla to Gauss */
+ .t_ref = 182, /* counts */
+ .min_temp_x10 = -620, /* 1/10:s degrees Celsius */
+ .get_measure = yas530_get_measure,
+ .get_calibration_data = yas530_get_calibration_data,
+ .dump_calibration = yas530_dump_calibration,
+ .measure_offsets = yas530_measure_offsets,
+ .power_on = yas530_power_on,
+ },
+ [yas532] = {
+ .devid = YAS532_DEVICE_ID,
+ .product_name = "YAS532 MS-3R",
+ .version_names = { "AB", "AC" },
+ .volatile_reg = yas530_volatile_reg,
+ .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg),
+ .scaling_val2 = 100000, /* nanotesla to Gauss */
+ .t_ref = 390, /* counts */
+ .min_temp_x10 = -500, /* 1/10:s degrees Celsius */
+ .get_measure = yas530_get_measure,
+ .get_calibration_data = yas532_get_calibration_data,
+ .dump_calibration = yas530_dump_calibration,
+ .measure_offsets = yas530_measure_offsets,
+ .power_on = yas530_power_on,
+ },
+ [yas533] = {
+ .devid = YAS532_DEVICE_ID,
+ .product_name = "YAS533 MS-3F",
+ .version_names = { "AB", "AC" },
+ .volatile_reg = yas530_volatile_reg,
+ .volatile_reg_qty = ARRAY_SIZE(yas530_volatile_reg),
+ .scaling_val2 = 100000, /* nanotesla to Gauss */
+ .t_ref = 390, /* counts */
+ .min_temp_x10 = -500, /* 1/10:s degrees Celsius */
+ .get_measure = yas530_get_measure,
+ .get_calibration_data = yas532_get_calibration_data,
+ .dump_calibration = yas530_dump_calibration,
+ .measure_offsets = yas530_measure_offsets,
+ .power_on = yas530_power_on,
+ },
+ [yas537] = {
+ .devid = YAS537_DEVICE_ID,
+ .product_name = "YAS537 MS-3T",
+ .version_names = { "v0", "v1" }, /* version naming unknown */
+ .volatile_reg = yas537_volatile_reg,
+ .volatile_reg_qty = ARRAY_SIZE(yas537_volatile_reg),
+ .scaling_val2 = 100000, /* nanotesla to Gauss */
+ .t_ref = 8120, /* counts */
+ .min_temp_x10 = -3860, /* 1/10:s degrees Celsius */
+ .get_measure = yas537_get_measure,
+ .get_calibration_data = yas537_get_calibration_data,
+ .dump_calibration = yas537_dump_calibration,
+ /* .measure_offets is not needed for yas537 */
+ .power_on = yas537_power_on,
+ },
+};
+
static int yas5xx_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct iio_dev *indio_dev;
struct device *dev = &i2c->dev;
struct yas5xx *yas5xx;
+ const struct yas5xx_chip_info *ci;
+ int id_check;
int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(*yas5xx));
@@ -843,10 +1415,8 @@ static int yas5xx_probe(struct i2c_client *i2c,
return dev_err_probe(dev, ret, "cannot get regulators\n");
ret = regulator_bulk_enable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs);
- if (ret) {
- dev_err(dev, "cannot enable regulators\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret, "cannot enable regulators\n");
/* See comment in runtime resume callback */
usleep_range(31000, 40000);
@@ -854,57 +1424,55 @@ static int yas5xx_probe(struct i2c_client *i2c,
/* This will take the device out of reset if need be */
yas5xx->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(yas5xx->reset)) {
- ret = dev_err_probe(dev, PTR_ERR(yas5xx->reset),
- "failed to get reset line\n");
+ ret = dev_err_probe(dev, PTR_ERR(yas5xx->reset), "failed to get reset line\n");
goto reg_off;
}
yas5xx->map = devm_regmap_init_i2c(i2c, &yas5xx_regmap_config);
if (IS_ERR(yas5xx->map)) {
- dev_err(dev, "failed to allocate register map\n");
- ret = PTR_ERR(yas5xx->map);
+ ret = dev_err_probe(dev, PTR_ERR(yas5xx->map), "failed to allocate register map\n");
goto assert_reset;
}
- ret = regmap_read(yas5xx->map, YAS5XX_DEVICE_ID, &yas5xx->devid);
+ ci = device_get_match_data(dev);
+ if (!ci)
+ ci = (const struct yas5xx_chip_info *)id->driver_data;
+ yas5xx->chip_info = ci;
+
+ ret = regmap_read(yas5xx->map, YAS5XX_DEVICE_ID, &id_check);
if (ret)
goto assert_reset;
- switch (yas5xx->devid) {
- case YAS530_DEVICE_ID:
- ret = yas530_get_calibration_data(yas5xx);
- if (ret)
- goto assert_reset;
- dev_info(dev, "detected YAS530 MS-3E %s",
- yas5xx->version ? "B" : "A");
- strncpy(yas5xx->name, "yas530", sizeof(yas5xx->name));
- break;
- case YAS532_DEVICE_ID:
- ret = yas532_get_calibration_data(yas5xx);
- if (ret)
- goto assert_reset;
- dev_info(dev, "detected YAS532/YAS533 MS-3R/F %s",
- yas5xx->version ? "AC" : "AB");
- strncpy(yas5xx->name, "yas532", sizeof(yas5xx->name));
- break;
- default:
- ret = -ENODEV;
- dev_err(dev, "unhandled device ID %02x\n", yas5xx->devid);
+ if (id_check != ci->devid) {
+ ret = dev_err_probe(dev, -ENODEV,
+ "device ID %02x doesn't match %s\n",
+ id_check, id->name);
goto assert_reset;
}
- yas5xx_dump_calibration(yas5xx);
- ret = yas5xx_power_on(yas5xx);
+ ret = ci->get_calibration_data(yas5xx);
if (ret)
goto assert_reset;
- ret = yas5xx_meaure_offsets(yas5xx);
+
+ dev_info(dev, "detected %s %s\n", ci->product_name,
+ ci->version_names[yas5xx->version]);
+
+ ci->dump_calibration(yas5xx);
+
+ ret = ci->power_on(yas5xx);
if (ret)
goto assert_reset;
+ if (ci->measure_offsets) {
+ ret = ci->measure_offsets(yas5xx);
+ if (ret)
+ goto assert_reset;
+ }
+
indio_dev->info = &yas5xx_info;
indio_dev->available_scan_masks = yas5xx_scan_masks;
indio_dev->modes = INDIO_DIRECT_MODE;
- indio_dev->name = yas5xx->name;
+ indio_dev->name = id->name;
indio_dev->channels = yas5xx_channels;
indio_dev->num_channels = ARRAY_SIZE(yas5xx_channels);
@@ -912,13 +1480,13 @@ static int yas5xx_probe(struct i2c_client *i2c,
yas5xx_handle_trigger,
NULL);
if (ret) {
- dev_err(dev, "triggered buffer setup failed\n");
+ dev_err_probe(dev, ret, "triggered buffer setup failed\n");
goto assert_reset;
}
ret = iio_device_register(indio_dev);
if (ret) {
- dev_err(dev, "device register failed\n");
+ dev_err_probe(dev, ret, "device register failed\n");
goto cleanup_buffer;
}
@@ -978,6 +1546,7 @@ static int yas5xx_runtime_resume(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct yas5xx *yas5xx = iio_priv(indio_dev);
+ const struct yas5xx_chip_info *ci = yas5xx->chip_info;
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(yas5xx->regs), yas5xx->regs);
@@ -994,7 +1563,7 @@ static int yas5xx_runtime_resume(struct device *dev)
usleep_range(31000, 40000);
gpiod_set_value_cansleep(yas5xx->reset, 0);
- ret = yas5xx_power_on(yas5xx);
+ ret = ci->power_on(yas5xx);
if (ret) {
dev_err(dev, "cannot power on\n");
goto out_reset;
@@ -1013,17 +1582,19 @@ static DEFINE_RUNTIME_DEV_PM_OPS(yas5xx_dev_pm_ops, yas5xx_runtime_suspend,
yas5xx_runtime_resume, NULL);
static const struct i2c_device_id yas5xx_id[] = {
- {"yas530", },
- {"yas532", },
- {"yas533", },
+ {"yas530", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas530] },
+ {"yas532", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas532] },
+ {"yas533", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas533] },
+ {"yas537", (kernel_ulong_t)&yas5xx_chip_info_tbl[yas537] },
{}
};
MODULE_DEVICE_TABLE(i2c, yas5xx_id);
static const struct of_device_id yas5xx_of_match[] = {
- { .compatible = "yamaha,yas530", },
- { .compatible = "yamaha,yas532", },
- { .compatible = "yamaha,yas533", },
+ { .compatible = "yamaha,yas530", &yas5xx_chip_info_tbl[yas530] },
+ { .compatible = "yamaha,yas532", &yas5xx_chip_info_tbl[yas532] },
+ { .compatible = "yamaha,yas533", &yas5xx_chip_info_tbl[yas533] },
+ { .compatible = "yamaha,yas537", &yas5xx_chip_info_tbl[yas537] },
{}
};
MODULE_DEVICE_TABLE(of, yas5xx_of_match);
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 0ff756cea63a..c9453389e4f7 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -17,14 +17,14 @@ config ABP060MG
will be called abp060mg.
config BMP280
- tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver"
+ tristate "Bosch Sensortec BMP180/BMP280/BMP380 pressure sensor I2C driver"
depends on (I2C || SPI_MASTER)
select REGMAP
select BMP280_I2C if (I2C)
select BMP280_SPI if (SPI_MASTER)
help
- Say yes here to build support for Bosch Sensortec BMP180 and BMP280
- pressure and temperature sensors. Also supports the BME280 with
+ Say yes here to build support for Bosch Sensortec BMP180, BMP280 and
+ BMP380 pressure and temperature sensors. Also supports the BME280 with
an additional humidity sensor channel.
To compile this driver as a module, choose M here: the core module
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index fe7aa81e7cc9..c0aff78489b4 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -9,13 +9,22 @@
* Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor.
*
* Datasheet:
- * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP180-DS000-121.pdf
- * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001-12.pdf
- * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME280_DS001-11.pdf
+ * https://cdn-shop.adafruit.com/datasheets/BST-BMP180-DS000-09.pdf
+ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf
+ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf
+ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf
+ *
+ * Notice:
+ * The link to the bmp180 datasheet points to an outdated version missing these changes:
+ * - Changed document referral from ANP015 to BST-MPS-AN004-00 on page 26
+ * - Updated equation for B3 param on section 3.5 to ((((long)AC1 * 4 + X3) << oss) + 2) / 4
+ * - Updated RoHS directive to 2011/65/EU effective 8 June 2011 on page 26
*/
#define pr_fmt(fmt) "bmp280: " fmt
+#include <linux/bitops.h>
+#include <linux/bitfield.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/regmap.h>
@@ -30,6 +39,8 @@
#include <linux/pm_runtime.h>
#include <linux/random.h>
+#include <asm/unaligned.h>
+
#include "bmp280.h"
/*
@@ -74,12 +85,51 @@ struct bmp280_calib {
s8 H6;
};
+/* See datasheet Section 3.11.1. */
+struct bmp380_calib {
+ u16 T1;
+ u16 T2;
+ s8 T3;
+ s16 P1;
+ s16 P2;
+ s8 P3;
+ s8 P4;
+ u16 P5;
+ u16 P6;
+ s8 P7;
+ s8 P8;
+ s16 P9;
+ s8 P10;
+ s8 P11;
+};
+
static const char *const bmp280_supply_names[] = {
"vddd", "vdda"
};
#define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names)
+enum bmp380_odr {
+ BMP380_ODR_200HZ,
+ BMP380_ODR_100HZ,
+ BMP380_ODR_50HZ,
+ BMP380_ODR_25HZ,
+ BMP380_ODR_12_5HZ,
+ BMP380_ODR_6_25HZ,
+ BMP380_ODR_3_125HZ,
+ BMP380_ODR_1_5625HZ,
+ BMP380_ODR_0_78HZ,
+ BMP380_ODR_0_39HZ,
+ BMP380_ODR_0_2HZ,
+ BMP380_ODR_0_1HZ,
+ BMP380_ODR_0_05HZ,
+ BMP380_ODR_0_02HZ,
+ BMP380_ODR_0_01HZ,
+ BMP380_ODR_0_006HZ,
+ BMP380_ODR_0_003HZ,
+ BMP380_ODR_0_0015HZ,
+};
+
struct bmp280_data {
struct device *dev;
struct mutex lock;
@@ -90,6 +140,7 @@ struct bmp280_data {
union {
struct bmp180_calib bmp180;
struct bmp280_calib bmp280;
+ struct bmp380_calib bmp380;
} calib;
struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES];
unsigned int start_up_time; /* in microseconds */
@@ -98,36 +149,99 @@ struct bmp280_data {
u8 oversampling_press;
u8 oversampling_temp;
u8 oversampling_humid;
+ u8 iir_filter_coeff;
+
+ /*
+ * BMP380 devices introduce sampling frequency configuration. See
+ * datasheet sections 3.3.3. and 4.3.19 for more details.
+ *
+ * BMx280 devices allowed indirect configuration of sampling frequency
+ * changing the t_standby duration between measurements, as detailed on
+ * section 3.6.3 of the datasheet.
+ */
+ int sampling_freq;
/*
* Carryover value from temperature conversion, used in pressure
* calculation.
*/
s32 t_fine;
+
+ /*
+ * DMA (thus cache coherency maintenance) may require the
+ * transfer buffers to live in their own cache lines.
+ */
+ union {
+ /* Sensor data buffer */
+ u8 buf[3];
+ /* Calibration data buffers */
+ __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2];
+ __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2];
+ u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT];
+ /* Miscellaneous, endianess-aware data buffers */
+ __le16 le16;
+ __be16 be16;
+ } __aligned(IIO_DMA_MINALIGN);
};
struct bmp280_chip_info {
+ unsigned int id_reg;
+
+ const struct iio_chan_spec *channels;
+ int num_channels;
+ unsigned int start_up_time;
+
const int *oversampling_temp_avail;
int num_oversampling_temp_avail;
+ int oversampling_temp_default;
const int *oversampling_press_avail;
int num_oversampling_press_avail;
+ int oversampling_press_default;
const int *oversampling_humid_avail;
int num_oversampling_humid_avail;
+ int oversampling_humid_default;
+
+ const int *iir_filter_coeffs_avail;
+ int num_iir_filter_coeffs_avail;
+ int iir_filter_coeff_default;
+
+ const int (*sampling_freq_avail)[2];
+ int num_sampling_freq_avail;
+ int sampling_freq_default;
int (*chip_config)(struct bmp280_data *);
int (*read_temp)(struct bmp280_data *, int *);
int (*read_press)(struct bmp280_data *, int *, int *);
int (*read_humid)(struct bmp280_data *, int *, int *);
+ int (*read_calib)(struct bmp280_data *);
};
/*
* These enums are used for indexing into the array of compensation
* parameters for BMP280.
*/
-enum { T1, T2, T3 };
-enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 };
+enum { T1, T2, T3, P1, P2, P3, P4, P5, P6, P7, P8, P9 };
+
+enum {
+ /* Temperature calib indexes */
+ BMP380_T1 = 0,
+ BMP380_T2 = 2,
+ BMP380_T3 = 4,
+ /* Pressure calib indexes */
+ BMP380_P1 = 5,
+ BMP380_P2 = 7,
+ BMP380_P3 = 9,
+ BMP380_P4 = 10,
+ BMP380_P5 = 11,
+ BMP380_P6 = 13,
+ BMP380_P7 = 15,
+ BMP380_P8 = 16,
+ BMP380_P9 = 17,
+ BMP380_P10 = 19,
+ BMP380_P11 = 20,
+};
static const struct iio_chan_spec bmp280_channels[] = {
{
@@ -147,56 +261,81 @@ static const struct iio_chan_spec bmp280_channels[] = {
},
};
-static int bmp280_read_calib(struct bmp280_data *data,
- struct bmp280_calib *calib,
- unsigned int chip)
+static const struct iio_chan_spec bmp380_channels[] = {
+ {
+ .type = IIO_PRESSURE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+ },
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+ },
+ {
+ .type = IIO_HUMIDITYRELATIVE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+ },
+};
+
+static int bmp280_read_calib(struct bmp280_data *data)
{
+ struct bmp280_calib *calib = &data->calib.bmp280;
int ret;
- unsigned int tmp;
- __le16 l16;
- __be16 b16;
- struct device *dev = data->dev;
- __le16 t_buf[BMP280_COMP_TEMP_REG_COUNT / 2];
- __le16 p_buf[BMP280_COMP_PRESS_REG_COUNT / 2];
- /* Read temperature calibration values. */
+
+ /* Read temperature and pressure calibration values. */
ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START,
- t_buf, BMP280_COMP_TEMP_REG_COUNT);
+ data->bmp280_cal_buf, sizeof(data->bmp280_cal_buf));
if (ret < 0) {
dev_err(data->dev,
- "failed to read temperature calibration parameters\n");
+ "failed to read temperature and pressure calibration parameters\n");
return ret;
}
- /* Toss the temperature calibration data into the entropy pool */
- add_device_randomness(t_buf, sizeof(t_buf));
+ /* Toss the temperature and pressure calibration data into the entropy pool */
+ add_device_randomness(data->bmp280_cal_buf, sizeof(data->bmp280_cal_buf));
+
+ /* Parse temperature calibration values. */
+ calib->T1 = le16_to_cpu(data->bmp280_cal_buf[T1]);
+ calib->T2 = le16_to_cpu(data->bmp280_cal_buf[T2]);
+ calib->T3 = le16_to_cpu(data->bmp280_cal_buf[T3]);
+
+ /* Parse pressure calibration values. */
+ calib->P1 = le16_to_cpu(data->bmp280_cal_buf[P1]);
+ calib->P2 = le16_to_cpu(data->bmp280_cal_buf[P2]);
+ calib->P3 = le16_to_cpu(data->bmp280_cal_buf[P3]);
+ calib->P4 = le16_to_cpu(data->bmp280_cal_buf[P4]);
+ calib->P5 = le16_to_cpu(data->bmp280_cal_buf[P5]);
+ calib->P6 = le16_to_cpu(data->bmp280_cal_buf[P6]);
+ calib->P7 = le16_to_cpu(data->bmp280_cal_buf[P7]);
+ calib->P8 = le16_to_cpu(data->bmp280_cal_buf[P8]);
+ calib->P9 = le16_to_cpu(data->bmp280_cal_buf[P9]);
- calib->T1 = le16_to_cpu(t_buf[T1]);
- calib->T2 = le16_to_cpu(t_buf[T2]);
- calib->T3 = le16_to_cpu(t_buf[T3]);
+ return 0;
+}
- /* Read pressure calibration values. */
- ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_PRESS_START,
- p_buf, BMP280_COMP_PRESS_REG_COUNT);
- if (ret < 0) {
- dev_err(data->dev,
- "failed to read pressure calibration parameters\n");
+static int bme280_read_calib(struct bmp280_data *data)
+{
+ struct bmp280_calib *calib = &data->calib.bmp280;
+ struct device *dev = data->dev;
+ unsigned int tmp;
+ int ret;
+
+ /* Load shared calibration params with bmp280 first */
+ ret = bmp280_read_calib(data);
+ if (ret < 0) {
+ dev_err(dev, "failed to read common bmp280 calibration parameters\n");
return ret;
}
- /* Toss the pressure calibration data into the entropy pool */
- add_device_randomness(p_buf, sizeof(p_buf));
-
- calib->P1 = le16_to_cpu(p_buf[P1]);
- calib->P2 = le16_to_cpu(p_buf[P2]);
- calib->P3 = le16_to_cpu(p_buf[P3]);
- calib->P4 = le16_to_cpu(p_buf[P4]);
- calib->P5 = le16_to_cpu(p_buf[P5]);
- calib->P6 = le16_to_cpu(p_buf[P6]);
- calib->P7 = le16_to_cpu(p_buf[P7]);
- calib->P8 = le16_to_cpu(p_buf[P8]);
- calib->P9 = le16_to_cpu(p_buf[P9]);
-
/*
* Read humidity calibration values.
* Due to some odd register addressing we cannot just
@@ -204,8 +343,6 @@ static int bmp280_read_calib(struct bmp280_data *data,
* value separately and sometimes do some bit shifting...
* Humidity data is only available on BME280.
*/
- if (chip != BME280_CHIP_ID)
- return 0;
ret = regmap_read(data->regmap, BMP280_REG_COMP_H1, &tmp);
if (ret < 0) {
@@ -214,12 +351,13 @@ static int bmp280_read_calib(struct bmp280_data *data,
}
calib->H1 = tmp;
- ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2, &l16, 2);
+ ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2,
+ &data->le16, sizeof(data->le16));
if (ret < 0) {
dev_err(dev, "failed to read H2 comp value\n");
return ret;
}
- calib->H2 = sign_extend32(le16_to_cpu(l16), 15);
+ calib->H2 = sign_extend32(le16_to_cpu(data->le16), 15);
ret = regmap_read(data->regmap, BMP280_REG_COMP_H3, &tmp);
if (ret < 0) {
@@ -228,20 +366,22 @@ static int bmp280_read_calib(struct bmp280_data *data,
}
calib->H3 = tmp;
- ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4, &b16, 2);
+ ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4,
+ &data->be16, sizeof(data->be16));
if (ret < 0) {
dev_err(dev, "failed to read H4 comp value\n");
return ret;
}
- calib->H4 = sign_extend32(((be16_to_cpu(b16) >> 4) & 0xff0) |
- (be16_to_cpu(b16) & 0xf), 11);
+ calib->H4 = sign_extend32(((be16_to_cpu(data->be16) >> 4) & 0xff0) |
+ (be16_to_cpu(data->be16) & 0xf), 11);
- ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5, &l16, 2);
+ ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5,
+ &data->le16, sizeof(data->le16));
if (ret < 0) {
dev_err(dev, "failed to read H5 comp value\n");
return ret;
}
- calib->H5 = sign_extend32(((le16_to_cpu(l16) >> 4) & 0xfff), 11);
+ calib->H5 = sign_extend32(FIELD_GET(BMP280_COMP_H5_MASK, le16_to_cpu(data->le16)), 11);
ret = regmap_read(data->regmap, BMP280_REG_COMP_H6, &tmp);
if (ret < 0) {
@@ -261,8 +401,8 @@ static int bmp280_read_calib(struct bmp280_data *data,
static u32 bmp280_compensate_humidity(struct bmp280_data *data,
s32 adc_humidity)
{
- s32 var;
struct bmp280_calib *calib = &data->calib.bmp280;
+ s32 var;
var = ((s32)data->t_fine) - (s32)76800;
var = ((((adc_humidity << 14) - (calib->H4 << 20) - (calib->H5 * var))
@@ -286,8 +426,8 @@ static u32 bmp280_compensate_humidity(struct bmp280_data *data,
static s32 bmp280_compensate_temp(struct bmp280_data *data,
s32 adc_temp)
{
- s32 var1, var2;
struct bmp280_calib *calib = &data->calib.bmp280;
+ s32 var1, var2;
var1 = (((adc_temp >> 3) - ((s32)calib->T1 << 1)) *
((s32)calib->T2)) >> 11;
@@ -309,8 +449,8 @@ static s32 bmp280_compensate_temp(struct bmp280_data *data,
static u32 bmp280_compensate_press(struct bmp280_data *data,
s32 adc_press)
{
- s64 var1, var2, p;
struct bmp280_calib *calib = &data->calib.bmp280;
+ s64 var1, var2, p;
var1 = ((s64)data->t_fine) - 128000;
var2 = var1 * var1 * (s64)calib->P6;
@@ -335,17 +475,17 @@ static u32 bmp280_compensate_press(struct bmp280_data *data,
static int bmp280_read_temp(struct bmp280_data *data,
int *val)
{
- int ret;
- __be32 tmp = 0;
s32 adc_temp, comp_temp;
+ int ret;
- ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB, &tmp, 3);
+ ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB,
+ data->buf, sizeof(data->buf));
if (ret < 0) {
dev_err(data->dev, "failed to read temperature\n");
return ret;
}
- adc_temp = be32_to_cpu(tmp) >> 12;
+ adc_temp = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf));
if (adc_temp == BMP280_TEMP_SKIPPED) {
/* reading was skipped */
dev_err(data->dev, "reading temperature skipped\n");
@@ -368,23 +508,23 @@ static int bmp280_read_temp(struct bmp280_data *data,
static int bmp280_read_press(struct bmp280_data *data,
int *val, int *val2)
{
- int ret;
- __be32 tmp = 0;
- s32 adc_press;
u32 comp_press;
+ s32 adc_press;
+ int ret;
/* Read and compensate temperature so we get a reading of t_fine. */
ret = bmp280_read_temp(data, NULL);
if (ret < 0)
return ret;
- ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, &tmp, 3);
+ ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB,
+ data->buf, sizeof(data->buf));
if (ret < 0) {
dev_err(data->dev, "failed to read pressure\n");
return ret;
}
- adc_press = be32_to_cpu(tmp) >> 12;
+ adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf));
if (adc_press == BMP280_PRESS_SKIPPED) {
/* reading was skipped */
dev_err(data->dev, "reading pressure skipped\n");
@@ -400,23 +540,23 @@ static int bmp280_read_press(struct bmp280_data *data,
static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2)
{
- __be16 tmp;
- int ret;
- s32 adc_humidity;
u32 comp_humidity;
+ s32 adc_humidity;
+ int ret;
/* Read and compensate temperature so we get a reading of t_fine. */
ret = bmp280_read_temp(data, NULL);
if (ret < 0)
return ret;
- ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB, &tmp, 2);
+ ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB,
+ &data->be16, sizeof(data->be16));
if (ret < 0) {
dev_err(data->dev, "failed to read humidity\n");
return ret;
}
- adc_humidity = be16_to_cpu(tmp);
+ adc_humidity = be16_to_cpu(data->be16);
if (adc_humidity == BMP280_HUMIDITY_SKIPPED) {
/* reading was skipped */
dev_err(data->dev, "reading humidity skipped\n");
@@ -433,8 +573,8 @@ static int bmp280_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
- int ret;
struct bmp280_data *data = iio_priv(indio_dev);
+ int ret;
pm_runtime_get_sync(data->dev);
mutex_lock(&data->lock);
@@ -475,6 +615,25 @@ static int bmp280_read_raw(struct iio_dev *indio_dev,
break;
}
break;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ if (!data->chip_info->sampling_freq_avail) {
+ ret = -EINVAL;
+ break;
+ }
+
+ *val = data->chip_info->sampling_freq_avail[data->sampling_freq][0];
+ *val2 = data->chip_info->sampling_freq_avail[data->sampling_freq][1];
+ ret = IIO_VAL_INT_PLUS_MICRO;
+ break;
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ if (!data->chip_info->iir_filter_coeffs_avail) {
+ ret = -EINVAL;
+ break;
+ }
+
+ *val = (1 << data->iir_filter_coeff) - 1;
+ ret = IIO_VAL_INT;
+ break;
default:
ret = -EINVAL;
break;
@@ -490,15 +649,23 @@ static int bmp280_read_raw(struct iio_dev *indio_dev,
static int bmp280_write_oversampling_ratio_humid(struct bmp280_data *data,
int val)
{
- int i;
const int *avail = data->chip_info->oversampling_humid_avail;
const int n = data->chip_info->num_oversampling_humid_avail;
+ int ret, prev;
+ int i;
for (i = 0; i < n; i++) {
if (avail[i] == val) {
+ prev = data->oversampling_humid;
data->oversampling_humid = ilog2(val);
- return data->chip_info->chip_config(data);
+ ret = data->chip_info->chip_config(data);
+ if (ret) {
+ data->oversampling_humid = prev;
+ data->chip_info->chip_config(data);
+ return ret;
+ }
+ return 0;
}
}
return -EINVAL;
@@ -507,15 +674,23 @@ static int bmp280_write_oversampling_ratio_humid(struct bmp280_data *data,
static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data,
int val)
{
- int i;
const int *avail = data->chip_info->oversampling_temp_avail;
const int n = data->chip_info->num_oversampling_temp_avail;
+ int ret, prev;
+ int i;
for (i = 0; i < n; i++) {
if (avail[i] == val) {
+ prev = data->oversampling_temp;
data->oversampling_temp = ilog2(val);
- return data->chip_info->chip_config(data);
+ ret = data->chip_info->chip_config(data);
+ if (ret) {
+ data->oversampling_temp = prev;
+ data->chip_info->chip_config(data);
+ return ret;
+ }
+ return 0;
}
}
return -EINVAL;
@@ -524,15 +699,73 @@ static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data,
static int bmp280_write_oversampling_ratio_press(struct bmp280_data *data,
int val)
{
- int i;
const int *avail = data->chip_info->oversampling_press_avail;
const int n = data->chip_info->num_oversampling_press_avail;
+ int ret, prev;
+ int i;
for (i = 0; i < n; i++) {
if (avail[i] == val) {
+ prev = data->oversampling_press;
data->oversampling_press = ilog2(val);
- return data->chip_info->chip_config(data);
+ ret = data->chip_info->chip_config(data);
+ if (ret) {
+ data->oversampling_press = prev;
+ data->chip_info->chip_config(data);
+ return ret;
+ }
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+static int bmp280_write_sampling_frequency(struct bmp280_data *data,
+ int val, int val2)
+{
+ const int (*avail)[2] = data->chip_info->sampling_freq_avail;
+ const int n = data->chip_info->num_sampling_freq_avail;
+ int ret, prev;
+ int i;
+
+ for (i = 0; i < n; i++) {
+ if (avail[i][0] == val && avail[i][1] == val2) {
+ prev = data->sampling_freq;
+ data->sampling_freq = i;
+
+ ret = data->chip_info->chip_config(data);
+ if (ret) {
+ data->sampling_freq = prev;
+ data->chip_info->chip_config(data);
+ return ret;
+ }
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+static int bmp280_write_iir_filter_coeffs(struct bmp280_data *data, int val)
+{
+ const int *avail = data->chip_info->iir_filter_coeffs_avail;
+ const int n = data->chip_info->num_iir_filter_coeffs_avail;
+ int ret, prev;
+ int i;
+
+ for (i = 0; i < n; i++) {
+ if (avail[i] - 1 == val) {
+ prev = data->iir_filter_coeff;
+ data->iir_filter_coeff = i;
+
+ ret = data->chip_info->chip_config(data);
+ if (ret) {
+ data->iir_filter_coeff = prev;
+ data->chip_info->chip_config(data);
+ return ret;
+
+ }
+ return 0;
}
}
return -EINVAL;
@@ -542,9 +775,15 @@ static int bmp280_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
- int ret = 0;
struct bmp280_data *data = iio_priv(indio_dev);
+ int ret = 0;
+ /*
+ * Helper functions to update sensor running configuration.
+ * If an error happens applying new settings, will try restore
+ * previous parameters to ensure the sensor is left in a known
+ * working configuration.
+ */
switch (mask) {
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
pm_runtime_get_sync(data->dev);
@@ -567,6 +806,22 @@ static int bmp280_write_raw(struct iio_dev *indio_dev,
pm_runtime_mark_last_busy(data->dev);
pm_runtime_put_autosuspend(data->dev);
break;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ pm_runtime_get_sync(data->dev);
+ mutex_lock(&data->lock);
+ ret = bmp280_write_sampling_frequency(data, val, val2);
+ mutex_unlock(&data->lock);
+ pm_runtime_mark_last_busy(data->dev);
+ pm_runtime_put_autosuspend(data->dev);
+ break;
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ pm_runtime_get_sync(data->dev);
+ mutex_lock(&data->lock);
+ ret = bmp280_write_iir_filter_coeffs(data, val);
+ mutex_unlock(&data->lock);
+ pm_runtime_mark_last_busy(data->dev);
+ pm_runtime_put_autosuspend(data->dev);
+ break;
default:
return -EINVAL;
}
@@ -597,6 +852,17 @@ static int bmp280_read_avail(struct iio_dev *indio_dev,
}
*type = IIO_VAL_INT;
return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *vals = (const int *)data->chip_info->sampling_freq_avail;
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ /* Values are stored in a 2D matrix */
+ *length = data->chip_info->num_sampling_freq_avail;
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ *vals = data->chip_info->iir_filter_coeffs_avail;
+ *type = IIO_VAL_INT;
+ *length = data->chip_info->num_iir_filter_coeffs_avail;
+ return IIO_AVAIL_LIST;
default:
return -EINVAL;
}
@@ -610,9 +876,9 @@ static const struct iio_info bmp280_info = {
static int bmp280_chip_config(struct bmp280_data *data)
{
+ u8 osrs = FIELD_PREP(BMP280_OSRS_TEMP_MASK, data->oversampling_temp + 1) |
+ FIELD_PREP(BMP280_OSRS_PRESS_MASK, data->oversampling_press + 1);
int ret;
- u8 osrs = BMP280_OSRS_TEMP_X(data->oversampling_temp + 1) |
- BMP280_OSRS_PRESS_X(data->oversampling_press + 1);
ret = regmap_write_bits(data->regmap, BMP280_REG_CTRL_MEAS,
BMP280_OSRS_TEMP_MASK |
@@ -640,21 +906,39 @@ static int bmp280_chip_config(struct bmp280_data *data)
static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 };
static const struct bmp280_chip_info bmp280_chip_info = {
+ .id_reg = BMP280_REG_ID,
+ .start_up_time = 2000,
+ .channels = bmp280_channels,
+ .num_channels = 2,
+
.oversampling_temp_avail = bmp280_oversampling_avail,
.num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail),
+ /*
+ * Oversampling config values on BMx280 have one additional setting
+ * that other generations of the family don't:
+ * The value 0 means the measurement is bypassed instead of
+ * oversampling set to x1.
+ *
+ * To account for this difference, and preserve the same common
+ * config logic, this is handled later on chip_config callback
+ * incrementing one unit the oversampling setting.
+ */
+ .oversampling_temp_default = BMP280_OSRS_TEMP_2X - 1,
.oversampling_press_avail = bmp280_oversampling_avail,
.num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail),
+ .oversampling_press_default = BMP280_OSRS_PRESS_16X - 1,
.chip_config = bmp280_chip_config,
.read_temp = bmp280_read_temp,
.read_press = bmp280_read_press,
+ .read_calib = bmp280_read_calib,
};
static int bme280_chip_config(struct bmp280_data *data)
{
+ u8 osrs = FIELD_PREP(BMP280_OSRS_HUMIDITY_MASK, data->oversampling_humid + 1);
int ret;
- u8 osrs = BMP280_OSRS_HUMIDITIY_X(data->oversampling_humid + 1);
/*
* Oversampling of humidity must be set before oversampling of
@@ -670,27 +954,405 @@ static int bme280_chip_config(struct bmp280_data *data)
}
static const struct bmp280_chip_info bme280_chip_info = {
+ .id_reg = BMP280_REG_ID,
+ .start_up_time = 2000,
+ .channels = bmp280_channels,
+ .num_channels = 3,
+
.oversampling_temp_avail = bmp280_oversampling_avail,
.num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail),
+ .oversampling_temp_default = BMP280_OSRS_TEMP_2X - 1,
.oversampling_press_avail = bmp280_oversampling_avail,
.num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail),
+ .oversampling_press_default = BMP280_OSRS_PRESS_16X - 1,
.oversampling_humid_avail = bmp280_oversampling_avail,
.num_oversampling_humid_avail = ARRAY_SIZE(bmp280_oversampling_avail),
+ .oversampling_humid_default = BMP280_OSRS_HUMIDITY_16X - 1,
.chip_config = bme280_chip_config,
.read_temp = bmp280_read_temp,
.read_press = bmp280_read_press,
.read_humid = bmp280_read_humid,
+ .read_calib = bme280_read_calib,
};
-static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
+/*
+ * Helper function to send a command to BMP3XX sensors.
+ *
+ * Sensor processes commands written to the CMD register and signals
+ * execution result through "cmd_rdy" and "cmd_error" flags available on
+ * STATUS and ERROR registers.
+ */
+static int bmp380_cmd(struct bmp280_data *data, u8 cmd)
+{
+ unsigned int reg;
+ int ret;
+
+ /* Check if device is ready to process a command */
+ ret = regmap_read(data->regmap, BMP380_REG_STATUS, &reg);
+ if (ret) {
+ dev_err(data->dev, "failed to read error register\n");
+ return ret;
+ }
+ if (!(reg & BMP380_STATUS_CMD_RDY_MASK)) {
+ dev_err(data->dev, "device is not ready to accept commands\n");
+ return -EBUSY;
+ }
+
+ /* Send command to process */
+ ret = regmap_write(data->regmap, BMP380_REG_CMD, cmd);
+ if (ret) {
+ dev_err(data->dev, "failed to send command to device\n");
+ return ret;
+ }
+ /* Wait for 2ms for command to be processed */
+ usleep_range(data->start_up_time, data->start_up_time + 100);
+ /* Check for command processing error */
+ ret = regmap_read(data->regmap, BMP380_REG_ERROR, &reg);
+ if (ret) {
+ dev_err(data->dev, "error reading ERROR reg\n");
+ return ret;
+ }
+ if (reg & BMP380_ERR_CMD_MASK) {
+ dev_err(data->dev, "error processing command 0x%X\n", cmd);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * Returns temperature in Celsius dregrees, resolution is 0.01º C. Output value of
+ * "5123" equals 51.2º C. t_fine carries fine temperature as global value.
+ *
+ * Taken from datasheet, Section Appendix 9, "Compensation formula" and repo
+ * https://github.com/BoschSensortec/BMP3-Sensor-API.
+ */
+static s32 bmp380_compensate_temp(struct bmp280_data *data, u32 adc_temp)
+{
+ s64 var1, var2, var3, var4, var5, var6, comp_temp;
+ struct bmp380_calib *calib = &data->calib.bmp380;
+
+ var1 = ((s64) adc_temp) - (((s64) calib->T1) << 8);
+ var2 = var1 * ((s64) calib->T2);
+ var3 = var1 * var1;
+ var4 = var3 * ((s64) calib->T3);
+ var5 = (var2 << 18) + var4;
+ var6 = var5 >> 32;
+ data->t_fine = (s32) var6;
+ comp_temp = (var6 * 25) >> 14;
+
+ comp_temp = clamp_val(comp_temp, BMP380_MIN_TEMP, BMP380_MAX_TEMP);
+ return (s32) comp_temp;
+}
+
+/*
+ * Returns pressure in Pa as an unsigned 32 bit integer in fractional Pascal.
+ * Output value of "9528709" represents 9528709/100 = 95287.09 Pa = 952.8709 hPa.
+ *
+ * Taken from datasheet, Section 9.3. "Pressure compensation" and repository
+ * https://github.com/BoschSensortec/BMP3-Sensor-API.
+ */
+static u32 bmp380_compensate_press(struct bmp280_data *data, u32 adc_press)
+{
+ s64 var1, var2, var3, var4, var5, var6, offset, sensitivity;
+ struct bmp380_calib *calib = &data->calib.bmp380;
+ u32 comp_press;
+
+ var1 = (s64)data->t_fine * (s64)data->t_fine;
+ var2 = var1 >> 6;
+ var3 = (var2 * ((s64) data->t_fine)) >> 8;
+ var4 = ((s64)calib->P8 * var3) >> 5;
+ var5 = ((s64)calib->P7 * var1) << 4;
+ var6 = ((s64)calib->P6 * (s64)data->t_fine) << 22;
+ offset = ((s64)calib->P5 << 47) + var4 + var5 + var6;
+ var2 = ((s64)calib->P4 * var3) >> 5;
+ var4 = ((s64)calib->P3 * var1) << 2;
+ var5 = ((s64)calib->P2 - ((s64)1 << 14)) *
+ ((s64)data->t_fine << 21);
+ sensitivity = (((s64) calib->P1 - ((s64) 1 << 14)) << 46) +
+ var2 + var4 + var5;
+ var1 = (sensitivity >> 24) * (s64)adc_press;
+ var2 = (s64)calib->P10 * (s64)data->t_fine;
+ var3 = var2 + ((s64)calib->P9 << 16);
+ var4 = (var3 * (s64)adc_press) >> 13;
+
+ /*
+ * Dividing by 10 followed by multiplying by 10 to avoid
+ * possible overflow caused by (uncomp_data->pressure * partial_data4).
+ */
+ var5 = ((s64)adc_press * div_s64(var4, 10)) >> 9;
+ var5 *= 10;
+ var6 = (s64)adc_press * (s64)adc_press;
+ var2 = ((s64)calib->P11 * var6) >> 16;
+ var3 = (var2 * (s64)adc_press) >> 7;
+ var4 = (offset >> 2) + var1 + var5 + var3;
+ comp_press = ((u64)var4 * 25) >> 40;
+
+ comp_press = clamp_val(comp_press, BMP380_MIN_PRES, BMP380_MAX_PRES);
+ return comp_press;
+}
+
+static int bmp380_read_temp(struct bmp280_data *data, int *val)
+{
+ s32 comp_temp;
+ u32 adc_temp;
+ int ret;
+
+ ret = regmap_bulk_read(data->regmap, BMP380_REG_TEMP_XLSB,
+ data->buf, sizeof(data->buf));
+ if (ret) {
+ dev_err(data->dev, "failed to read temperature\n");
+ return ret;
+ }
+
+ adc_temp = get_unaligned_le24(data->buf);
+ if (adc_temp == BMP380_TEMP_SKIPPED) {
+ dev_err(data->dev, "reading temperature skipped\n");
+ return -EIO;
+ }
+ comp_temp = bmp380_compensate_temp(data, adc_temp);
+
+ /*
+ * Val might be NULL if we're called by the read_press routine,
+ * who only cares about the carry over t_fine value.
+ */
+ if (val) {
+ /* IIO reports temperatures in milli Celsius */
+ *val = comp_temp * 10;
+ return IIO_VAL_INT;
+ }
+
+ return 0;
+}
+
+static int bmp380_read_press(struct bmp280_data *data, int *val, int *val2)
+{
+ s32 comp_press;
+ u32 adc_press;
+ int ret;
+
+ /* Read and compensate for temperature so we get a reading of t_fine */
+ ret = bmp380_read_temp(data, NULL);
+ if (ret)
+ return ret;
+
+ ret = regmap_bulk_read(data->regmap, BMP380_REG_PRESS_XLSB,
+ data->buf, sizeof(data->buf));
+ if (ret) {
+ dev_err(data->dev, "failed to read pressure\n");
+ return ret;
+ }
+
+ adc_press = get_unaligned_le24(data->buf);
+ if (adc_press == BMP380_PRESS_SKIPPED) {
+ dev_err(data->dev, "reading pressure skipped\n");
+ return -EIO;
+ }
+ comp_press = bmp380_compensate_press(data, adc_press);
+
+ *val = comp_press;
+ /* Compensated pressure is in cPa (centipascals) */
+ *val2 = 100000;
+
+ return IIO_VAL_FRACTIONAL;
+}
+
+static int bmp380_read_calib(struct bmp280_data *data)
+{
+ struct bmp380_calib *calib = &data->calib.bmp380;
+ int ret;
+
+ /* Read temperature and pressure calibration data */
+ ret = regmap_bulk_read(data->regmap, BMP380_REG_CALIB_TEMP_START,
+ data->bmp380_cal_buf, sizeof(data->bmp380_cal_buf));
+ if (ret) {
+ dev_err(data->dev,
+ "failed to read temperature calibration parameters\n");
+ return ret;
+ }
+
+ /* Toss the temperature calibration data into the entropy pool */
+ add_device_randomness(data->bmp380_cal_buf, sizeof(data->bmp380_cal_buf));
+
+ /* Parse calibration values */
+ calib->T1 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_T1]);
+ calib->T2 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_T2]);
+ calib->T3 = data->bmp380_cal_buf[BMP380_T3];
+ calib->P1 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P1]);
+ calib->P2 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P2]);
+ calib->P3 = data->bmp380_cal_buf[BMP380_P3];
+ calib->P4 = data->bmp380_cal_buf[BMP380_P4];
+ calib->P5 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P5]);
+ calib->P6 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P6]);
+ calib->P7 = data->bmp380_cal_buf[BMP380_P7];
+ calib->P8 = data->bmp380_cal_buf[BMP380_P8];
+ calib->P9 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P9]);
+ calib->P10 = data->bmp380_cal_buf[BMP380_P10];
+ calib->P11 = data->bmp380_cal_buf[BMP380_P11];
+
+ return 0;
+}
+
+static const int bmp380_odr_table[][2] = {
+ [BMP380_ODR_200HZ] = {200, 0},
+ [BMP380_ODR_100HZ] = {100, 0},
+ [BMP380_ODR_50HZ] = {50, 0},
+ [BMP380_ODR_25HZ] = {25, 0},
+ [BMP380_ODR_12_5HZ] = {12, 500000},
+ [BMP380_ODR_6_25HZ] = {6, 250000},
+ [BMP380_ODR_3_125HZ] = {3, 125000},
+ [BMP380_ODR_1_5625HZ] = {1, 562500},
+ [BMP380_ODR_0_78HZ] = {0, 781250},
+ [BMP380_ODR_0_39HZ] = {0, 390625},
+ [BMP380_ODR_0_2HZ] = {0, 195313},
+ [BMP380_ODR_0_1HZ] = {0, 97656},
+ [BMP380_ODR_0_05HZ] = {0, 48828},
+ [BMP380_ODR_0_02HZ] = {0, 24414},
+ [BMP380_ODR_0_01HZ] = {0, 12207},
+ [BMP380_ODR_0_006HZ] = {0, 6104},
+ [BMP380_ODR_0_003HZ] = {0, 3052},
+ [BMP380_ODR_0_0015HZ] = {0, 1526},
+};
+
+static int bmp380_chip_config(struct bmp280_data *data)
{
+ bool change = false, aux;
+ unsigned int tmp;
+ u8 osrs;
int ret;
+
+ /* Configure power control register */
+ ret = regmap_update_bits(data->regmap, BMP380_REG_POWER_CONTROL,
+ BMP380_CTRL_SENSORS_MASK,
+ BMP380_CTRL_SENSORS_PRESS_EN |
+ BMP380_CTRL_SENSORS_TEMP_EN);
+ if (ret) {
+ dev_err(data->dev,
+ "failed to write operation control register\n");
+ return ret;
+ }
+
+ /* Configure oversampling */
+ osrs = FIELD_PREP(BMP380_OSRS_TEMP_MASK, data->oversampling_temp) |
+ FIELD_PREP(BMP380_OSRS_PRESS_MASK, data->oversampling_press);
+
+ ret = regmap_update_bits_check(data->regmap, BMP380_REG_OSR,
+ BMP380_OSRS_TEMP_MASK |
+ BMP380_OSRS_PRESS_MASK,
+ osrs, &aux);
+ if (ret) {
+ dev_err(data->dev, "failed to write oversampling register\n");
+ return ret;
+ }
+ change = change || aux;
+
+ /* Configure output data rate */
+ ret = regmap_update_bits_check(data->regmap, BMP380_REG_ODR,
+ BMP380_ODRS_MASK, data->sampling_freq, &aux);
+ if (ret) {
+ dev_err(data->dev, "failed to write ODR selection register\n");
+ return ret;
+ }
+ change = change || aux;
+
+ /* Set filter data */
+ ret = regmap_update_bits_check(data->regmap, BMP380_REG_CONFIG, BMP380_FILTER_MASK,
+ FIELD_PREP(BMP380_FILTER_MASK, data->iir_filter_coeff),
+ &aux);
+ if (ret) {
+ dev_err(data->dev, "failed to write config register\n");
+ return ret;
+ }
+ change = change || aux;
+
+ if (change) {
+ /*
+ * The configurations errors are detected on the fly during a measurement
+ * cycle. If the sampling frequency is too low, it's faster to reset
+ * the measurement loop than wait until the next measurement is due.
+ *
+ * Resets sensor measurement loop toggling between sleep and normal
+ * operating modes.
+ */
+ ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL,
+ BMP380_MODE_MASK,
+ FIELD_PREP(BMP380_MODE_MASK, BMP380_MODE_SLEEP));
+ if (ret) {
+ dev_err(data->dev, "failed to set sleep mode\n");
+ return ret;
+ }
+ usleep_range(2000, 2500);
+ ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL,
+ BMP380_MODE_MASK,
+ FIELD_PREP(BMP380_MODE_MASK, BMP380_MODE_NORMAL));
+ if (ret) {
+ dev_err(data->dev, "failed to set normal mode\n");
+ return ret;
+ }
+ /*
+ * Waits for measurement before checking configuration error flag.
+ * Selected longest measure time indicated in section 3.9.1
+ * in the datasheet.
+ */
+ msleep(80);
+
+ /* Check config error flag */
+ ret = regmap_read(data->regmap, BMP380_REG_ERROR, &tmp);
+ if (ret) {
+ dev_err(data->dev,
+ "failed to read error register\n");
+ return ret;
+ }
+ if (tmp & BMP380_ERR_CONF_MASK) {
+ dev_warn(data->dev,
+ "sensor flagged configuration as incompatible\n");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static const int bmp380_oversampling_avail[] = { 1, 2, 4, 8, 16, 32 };
+static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128};
+
+static const struct bmp280_chip_info bmp380_chip_info = {
+ .id_reg = BMP380_REG_ID,
+ .start_up_time = 2000,
+ .channels = bmp380_channels,
+ .num_channels = 2,
+
+ .oversampling_temp_avail = bmp380_oversampling_avail,
+ .num_oversampling_temp_avail = ARRAY_SIZE(bmp380_oversampling_avail),
+ .oversampling_temp_default = ilog2(1),
+
+ .oversampling_press_avail = bmp380_oversampling_avail,
+ .num_oversampling_press_avail = ARRAY_SIZE(bmp380_oversampling_avail),
+ .oversampling_press_default = ilog2(4),
+
+ .sampling_freq_avail = bmp380_odr_table,
+ .num_sampling_freq_avail = ARRAY_SIZE(bmp380_odr_table) * 2,
+ .sampling_freq_default = BMP380_ODR_50HZ,
+
+ .iir_filter_coeffs_avail = bmp380_iir_filter_coeffs_avail,
+ .num_iir_filter_coeffs_avail = ARRAY_SIZE(bmp380_iir_filter_coeffs_avail),
+ .iir_filter_coeff_default = 2,
+
+ .chip_config = bmp380_chip_config,
+ .read_temp = bmp380_read_temp,
+ .read_press = bmp380_read_press,
+ .read_calib = bmp380_read_calib,
+};
+
+static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
+{
const int conversion_time_max[] = { 4500, 7500, 13500, 25500 };
unsigned int delay_us;
unsigned int ctrl;
+ int ret;
if (data->use_eoc)
reinit_completion(&data->done);
@@ -710,7 +1372,7 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
if (!ret)
dev_err(data->dev, "timeout waiting for completion\n");
} else {
- if (ctrl_meas == BMP180_MEAS_TEMP)
+ if (FIELD_GET(BMP180_MEAS_CTRL_MASK, ctrl_meas) == BMP180_MEAS_TEMP)
delay_us = 4500;
else
delay_us =
@@ -732,55 +1394,57 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
static int bmp180_read_adc_temp(struct bmp280_data *data, int *val)
{
- __be16 tmp;
int ret;
- ret = bmp180_measure(data, BMP180_MEAS_TEMP);
+ ret = bmp180_measure(data,
+ FIELD_PREP(BMP180_MEAS_CTRL_MASK, BMP180_MEAS_TEMP) |
+ BMP180_MEAS_SCO);
if (ret)
return ret;
- ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, &tmp, 2);
+ ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB,
+ &data->be16, sizeof(data->be16));
if (ret)
return ret;
- *val = be16_to_cpu(tmp);
+ *val = be16_to_cpu(data->be16);
return 0;
}
-static int bmp180_read_calib(struct bmp280_data *data,
- struct bmp180_calib *calib)
+static int bmp180_read_calib(struct bmp280_data *data)
{
+ struct bmp180_calib *calib = &data->calib.bmp180;
int ret;
int i;
- __be16 buf[BMP180_REG_CALIB_COUNT / 2];
- ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, buf,
- sizeof(buf));
+ ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START,
+ data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf));
if (ret < 0)
return ret;
/* None of the words has the value 0 or 0xFFFF */
- for (i = 0; i < ARRAY_SIZE(buf); i++) {
- if (buf[i] == cpu_to_be16(0) || buf[i] == cpu_to_be16(0xffff))
+ for (i = 0; i < ARRAY_SIZE(data->bmp180_cal_buf); i++) {
+ if (data->bmp180_cal_buf[i] == cpu_to_be16(0) ||
+ data->bmp180_cal_buf[i] == cpu_to_be16(0xffff))
return -EIO;
}
/* Toss the calibration data into the entropy pool */
- add_device_randomness(buf, sizeof(buf));
-
- calib->AC1 = be16_to_cpu(buf[AC1]);
- calib->AC2 = be16_to_cpu(buf[AC2]);
- calib->AC3 = be16_to_cpu(buf[AC3]);
- calib->AC4 = be16_to_cpu(buf[AC4]);
- calib->AC5 = be16_to_cpu(buf[AC5]);
- calib->AC6 = be16_to_cpu(buf[AC6]);
- calib->B1 = be16_to_cpu(buf[B1]);
- calib->B2 = be16_to_cpu(buf[B2]);
- calib->MB = be16_to_cpu(buf[MB]);
- calib->MC = be16_to_cpu(buf[MC]);
- calib->MD = be16_to_cpu(buf[MD]);
+ add_device_randomness(data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf));
+
+ calib->AC1 = be16_to_cpu(data->bmp180_cal_buf[AC1]);
+ calib->AC2 = be16_to_cpu(data->bmp180_cal_buf[AC2]);
+ calib->AC3 = be16_to_cpu(data->bmp180_cal_buf[AC3]);
+ calib->AC4 = be16_to_cpu(data->bmp180_cal_buf[AC4]);
+ calib->AC5 = be16_to_cpu(data->bmp180_cal_buf[AC5]);
+ calib->AC6 = be16_to_cpu(data->bmp180_cal_buf[AC6]);
+ calib->B1 = be16_to_cpu(data->bmp180_cal_buf[B1]);
+ calib->B2 = be16_to_cpu(data->bmp180_cal_buf[B2]);
+ calib->MB = be16_to_cpu(data->bmp180_cal_buf[MB]);
+ calib->MC = be16_to_cpu(data->bmp180_cal_buf[MC]);
+ calib->MD = be16_to_cpu(data->bmp180_cal_buf[MD]);
return 0;
}
@@ -793,8 +1457,8 @@ static int bmp180_read_calib(struct bmp280_data *data,
*/
static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp)
{
- s32 x1, x2;
struct bmp180_calib *calib = &data->calib.bmp180;
+ s32 x1, x2;
x1 = ((adc_temp - calib->AC6) * calib->AC5) >> 15;
x2 = (calib->MC << 11) / (x1 + calib->MD);
@@ -805,8 +1469,8 @@ static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp)
static int bmp180_read_temp(struct bmp280_data *data, int *val)
{
- int ret;
s32 adc_temp, comp_temp;
+ int ret;
ret = bmp180_read_adc_temp(data, &adc_temp);
if (ret)
@@ -828,19 +1492,22 @@ static int bmp180_read_temp(struct bmp280_data *data, int *val)
static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
{
- int ret;
- __be32 tmp = 0;
u8 oss = data->oversampling_press;
+ int ret;
- ret = bmp180_measure(data, BMP180_MEAS_PRESS_X(oss));
+ ret = bmp180_measure(data,
+ FIELD_PREP(BMP180_MEAS_CTRL_MASK, BMP180_MEAS_PRESS) |
+ FIELD_PREP(BMP180_OSRS_PRESS_MASK, oss) |
+ BMP180_MEAS_SCO);
if (ret)
return ret;
- ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, &tmp, 3);
+ ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB,
+ data->buf, sizeof(data->buf));
if (ret)
return ret;
- *val = (be32_to_cpu(tmp) >> 8) >> (8 - oss);
+ *val = get_unaligned_be24(data->buf) >> (8 - oss);
return 0;
}
@@ -852,11 +1519,11 @@ static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
*/
static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press)
{
+ struct bmp180_calib *calib = &data->calib.bmp180;
+ s32 oss = data->oversampling_press;
s32 x1, x2, x3, p;
s32 b3, b6;
u32 b4, b7;
- s32 oss = data->oversampling_press;
- struct bmp180_calib *calib = &data->calib.bmp180;
b6 = data->t_fine - 4000;
x1 = (calib->B2 * (b6 * b6 >> 12)) >> 11;
@@ -883,9 +1550,9 @@ static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press)
static int bmp180_read_press(struct bmp280_data *data,
int *val, int *val2)
{
- int ret;
- s32 adc_press;
u32 comp_press;
+ s32 adc_press;
+ int ret;
/* Read and compensate temperature so we get a reading of t_fine. */
ret = bmp180_read_temp(data, NULL);
@@ -913,17 +1580,25 @@ static const int bmp180_oversampling_temp_avail[] = { 1 };
static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 };
static const struct bmp280_chip_info bmp180_chip_info = {
+ .id_reg = BMP280_REG_ID,
+ .start_up_time = 2000,
+ .channels = bmp280_channels,
+ .num_channels = 2,
+
.oversampling_temp_avail = bmp180_oversampling_temp_avail,
.num_oversampling_temp_avail =
ARRAY_SIZE(bmp180_oversampling_temp_avail),
+ .oversampling_temp_default = 0,
.oversampling_press_avail = bmp180_oversampling_press_avail,
.num_oversampling_press_avail =
ARRAY_SIZE(bmp180_oversampling_press_avail),
+ .oversampling_press_default = BMP180_MEAS_PRESS_8X,
.chip_config = bmp180_chip_config,
.read_temp = bmp180_read_temp,
.read_press = bmp180_read_press,
+ .read_calib = bmp180_read_calib,
};
static irqreturn_t bmp085_eoc_irq(int irq, void *d)
@@ -990,11 +1665,12 @@ int bmp280_common_probe(struct device *dev,
const char *name,
int irq)
{
- int ret;
+ const struct bmp280_chip_info *chip_info;
struct iio_dev *indio_dev;
struct bmp280_data *data;
- unsigned int chip_id;
struct gpio_desc *gpiod;
+ unsigned int chip_id;
+ int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
if (!indio_dev)
@@ -1005,36 +1681,36 @@ int bmp280_common_probe(struct device *dev,
data->dev = dev;
indio_dev->name = name;
- indio_dev->channels = bmp280_channels;
indio_dev->info = &bmp280_info;
indio_dev->modes = INDIO_DIRECT_MODE;
switch (chip) {
case BMP180_CHIP_ID:
- indio_dev->num_channels = 2;
- data->chip_info = &bmp180_chip_info;
- data->oversampling_press = ilog2(8);
- data->oversampling_temp = ilog2(1);
- data->start_up_time = 10000;
+ chip_info = &bmp180_chip_info;
break;
case BMP280_CHIP_ID:
- indio_dev->num_channels = 2;
- data->chip_info = &bmp280_chip_info;
- data->oversampling_press = ilog2(16);
- data->oversampling_temp = ilog2(2);
- data->start_up_time = 2000;
+ chip_info = &bmp280_chip_info;
break;
case BME280_CHIP_ID:
- indio_dev->num_channels = 3;
- data->chip_info = &bme280_chip_info;
- data->oversampling_press = ilog2(16);
- data->oversampling_humid = ilog2(16);
- data->oversampling_temp = ilog2(2);
- data->start_up_time = 2000;
+ chip_info = &bme280_chip_info;
+ break;
+ case BMP380_CHIP_ID:
+ chip_info = &bmp380_chip_info;
break;
default:
return -EINVAL;
}
+ data->chip_info = chip_info;
+
+ /* Apply initial values from chip info structure */
+ indio_dev->channels = chip_info->channels;
+ indio_dev->num_channels = chip_info->num_channels;
+ data->oversampling_press = chip_info->oversampling_press_default;
+ data->oversampling_humid = chip_info->oversampling_humid_default;
+ data->oversampling_temp = chip_info->oversampling_temp_default;
+ data->iir_filter_coeff = chip_info->iir_filter_coeff_default;
+ data->sampling_freq = chip_info->sampling_freq_default;
+ data->start_up_time = chip_info->start_up_time;
/* Bring up regulators */
regulator_bulk_set_supply_names(data->supplies,
@@ -1071,7 +1747,8 @@ int bmp280_common_probe(struct device *dev,
}
data->regmap = regmap;
- ret = regmap_read(regmap, BMP280_REG_ID, &chip_id);
+
+ ret = regmap_read(regmap, data->chip_info->id_reg, &chip_id);
if (ret < 0)
return ret;
if (chip_id != chip) {
@@ -1080,6 +1757,13 @@ int bmp280_common_probe(struct device *dev,
return -EINVAL;
}
+ /* BMP3xx requires soft-reset as part of initialization */
+ if (chip_id == BMP380_CHIP_ID) {
+ ret = bmp380_cmd(data, BMP380_CMD_SOFT_RESET);
+ if (ret < 0)
+ return ret;
+ }
+
ret = data->chip_info->chip_config(data);
if (ret < 0)
return ret;
@@ -1091,21 +1775,11 @@ int bmp280_common_probe(struct device *dev,
* non-volatile memory during production". Let's read them out at probe
* time once. They will not change.
*/
- if (chip_id == BMP180_CHIP_ID) {
- ret = bmp180_read_calib(data, &data->calib.bmp180);
- if (ret < 0) {
- dev_err(data->dev,
- "failed to read calibration coefficients\n");
- return ret;
- }
- } else if (chip_id == BMP280_CHIP_ID || chip_id == BME280_CHIP_ID) {
- ret = bmp280_read_calib(data, &data->calib.bmp280, chip_id);
- if (ret < 0) {
- dev_err(data->dev,
- "failed to read calibration coefficients\n");
- return ret;
- }
- }
+
+ ret = data->chip_info->read_calib(data);
+ if (ret < 0)
+ return dev_err_probe(data->dev, ret,
+ "failed to read calibration coefficients\n");
/*
* Attempt to grab an optional EOC IRQ - only the BMP085 has this
diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c
index bf4a7a617537..0c27211f3ea0 100644
--- a/drivers/iio/pressure/bmp280-i2c.c
+++ b/drivers/iio/pressure/bmp280-i2c.c
@@ -19,6 +19,9 @@ static int bmp280_i2c_probe(struct i2c_client *client,
case BME280_CHIP_ID:
regmap_config = &bmp280_regmap_config;
break;
+ case BMP380_CHIP_ID:
+ regmap_config = &bmp380_regmap_config;
+ break;
default:
return -EINVAL;
}
@@ -37,19 +40,21 @@ static int bmp280_i2c_probe(struct i2c_client *client,
}
static const struct of_device_id bmp280_of_i2c_match[] = {
- { .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID },
- { .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID },
- { .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID },
{ .compatible = "bosch,bmp085", .data = (void *)BMP180_CHIP_ID },
+ { .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID },
+ { .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID },
+ { .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID },
+ { .compatible = "bosch,bmp380", .data = (void *)BMP380_CHIP_ID },
{ },
};
MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match);
static const struct i2c_device_id bmp280_i2c_id[] = {
- {"bmp280", BMP280_CHIP_ID },
- {"bmp180", BMP180_CHIP_ID },
{"bmp085", BMP180_CHIP_ID },
+ {"bmp180", BMP180_CHIP_ID },
+ {"bmp280", BMP280_CHIP_ID },
{"bme280", BME280_CHIP_ID },
+ {"bmp380", BMP380_CHIP_ID },
{ },
};
MODULE_DEVICE_TABLE(i2c, bmp280_i2c_id);
diff --git a/drivers/iio/pressure/bmp280-regmap.c b/drivers/iio/pressure/bmp280-regmap.c
index 969698518984..c98c67970265 100644
--- a/drivers/iio/pressure/bmp280-regmap.c
+++ b/drivers/iio/pressure/bmp280-regmap.c
@@ -72,6 +72,49 @@ static bool bmp280_is_volatile_reg(struct device *dev, unsigned int reg)
}
}
+static bool bmp380_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BMP380_REG_CMD:
+ case BMP380_REG_CONFIG:
+ case BMP380_REG_FIFO_CONFIG_1:
+ case BMP380_REG_FIFO_CONFIG_2:
+ case BMP380_REG_FIFO_WATERMARK_LSB:
+ case BMP380_REG_FIFO_WATERMARK_MSB:
+ case BMP380_REG_POWER_CONTROL:
+ case BMP380_REG_INT_CONTROL:
+ case BMP380_REG_IF_CONFIG:
+ case BMP380_REG_ODR:
+ case BMP380_REG_OSR:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool bmp380_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BMP380_REG_TEMP_XLSB:
+ case BMP380_REG_TEMP_LSB:
+ case BMP380_REG_TEMP_MSB:
+ case BMP380_REG_PRESS_XLSB:
+ case BMP380_REG_PRESS_LSB:
+ case BMP380_REG_PRESS_MSB:
+ case BMP380_REG_SENSOR_TIME_XLSB:
+ case BMP380_REG_SENSOR_TIME_LSB:
+ case BMP380_REG_SENSOR_TIME_MSB:
+ case BMP380_REG_INT_STATUS:
+ case BMP380_REG_FIFO_DATA:
+ case BMP380_REG_STATUS:
+ case BMP380_REG_ERROR:
+ case BMP380_REG_EVENT:
+ return true;
+ default:
+ return false;
+ }
+}
+
const struct regmap_config bmp280_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -83,3 +126,15 @@ const struct regmap_config bmp280_regmap_config = {
.volatile_reg = bmp280_is_volatile_reg,
};
EXPORT_SYMBOL_NS(bmp280_regmap_config, IIO_BMP280);
+
+const struct regmap_config bmp380_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = BMP380_REG_CMD,
+ .cache_type = REGCACHE_RBTREE,
+
+ .writeable_reg = bmp380_is_writeable_reg,
+ .volatile_reg = bmp380_is_volatile_reg,
+};
+EXPORT_SYMBOL_NS(bmp380_regmap_config, IIO_BMP280);
diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c
index 4cfaf3e869b8..011c68e07ebf 100644
--- a/drivers/iio/pressure/bmp280-spi.c
+++ b/drivers/iio/pressure/bmp280-spi.c
@@ -66,6 +66,9 @@ static int bmp280_spi_probe(struct spi_device *spi)
case BME280_CHIP_ID:
regmap_config = &bmp280_regmap_config;
break;
+ case BMP380_CHIP_ID:
+ regmap_config = &bmp380_regmap_config;
+ break;
default:
return -EINVAL;
}
@@ -92,6 +95,7 @@ static const struct of_device_id bmp280_of_spi_match[] = {
{ .compatible = "bosch,bmp181", },
{ .compatible = "bosch,bmp280", },
{ .compatible = "bosch,bme280", },
+ { .compatible = "bosch,bmp380", },
{ },
};
MODULE_DEVICE_TABLE(of, bmp280_of_spi_match);
@@ -101,6 +105,7 @@ static const struct spi_device_id bmp280_spi_id[] = {
{ "bmp181", BMP180_CHIP_ID },
{ "bmp280", BMP280_CHIP_ID },
{ "bme280", BME280_CHIP_ID },
+ { "bmp380", BMP380_CHIP_ID },
{ }
};
MODULE_DEVICE_TABLE(spi, bmp280_spi_id);
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index 57ba0e85db91..c791325c7416 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -3,6 +3,87 @@
#include <linux/device.h>
#include <linux/regmap.h>
+/* BMP380 specific registers */
+#define BMP380_REG_CMD 0x7E
+#define BMP380_REG_CONFIG 0x1F
+#define BMP380_REG_ODR 0x1D
+#define BMP380_REG_OSR 0x1C
+#define BMP380_REG_POWER_CONTROL 0x1B
+#define BMP380_REG_IF_CONFIG 0x1A
+#define BMP380_REG_INT_CONTROL 0x19
+#define BMP380_REG_INT_STATUS 0x11
+#define BMP380_REG_EVENT 0x10
+#define BMP380_REG_STATUS 0x03
+#define BMP380_REG_ERROR 0x02
+#define BMP380_REG_ID 0x00
+
+#define BMP380_REG_FIFO_CONFIG_1 0x18
+#define BMP380_REG_FIFO_CONFIG_2 0x17
+#define BMP380_REG_FIFO_WATERMARK_MSB 0x16
+#define BMP380_REG_FIFO_WATERMARK_LSB 0x15
+#define BMP380_REG_FIFO_DATA 0x14
+#define BMP380_REG_FIFO_LENGTH_MSB 0x13
+#define BMP380_REG_FIFO_LENGTH_LSB 0x12
+
+#define BMP380_REG_SENSOR_TIME_MSB 0x0E
+#define BMP380_REG_SENSOR_TIME_LSB 0x0D
+#define BMP380_REG_SENSOR_TIME_XLSB 0x0C
+
+#define BMP380_REG_TEMP_MSB 0x09
+#define BMP380_REG_TEMP_LSB 0x08
+#define BMP380_REG_TEMP_XLSB 0x07
+
+#define BMP380_REG_PRESS_MSB 0x06
+#define BMP380_REG_PRESS_LSB 0x05
+#define BMP380_REG_PRESS_XLSB 0x04
+
+#define BMP380_REG_CALIB_TEMP_START 0x31
+#define BMP380_CALIB_REG_COUNT 21
+
+#define BMP380_FILTER_MASK GENMASK(3, 1)
+#define BMP380_FILTER_OFF 0
+#define BMP380_FILTER_1X 1
+#define BMP380_FILTER_3X 2
+#define BMP380_FILTER_7X 3
+#define BMP380_FILTER_15X 4
+#define BMP380_FILTER_31X 5
+#define BMP380_FILTER_63X 6
+#define BMP380_FILTER_127X 7
+
+#define BMP380_OSRS_TEMP_MASK GENMASK(5, 3)
+#define BMP380_OSRS_PRESS_MASK GENMASK(2, 0)
+
+#define BMP380_ODRS_MASK GENMASK(4, 0)
+
+#define BMP380_CTRL_SENSORS_MASK GENMASK(1, 0)
+#define BMP380_CTRL_SENSORS_PRESS_EN BIT(0)
+#define BMP380_CTRL_SENSORS_TEMP_EN BIT(1)
+#define BMP380_MODE_MASK GENMASK(5, 4)
+#define BMP380_MODE_SLEEP 0
+#define BMP380_MODE_FORCED 1
+#define BMP380_MODE_NORMAL 3
+
+#define BMP380_MIN_TEMP -4000
+#define BMP380_MAX_TEMP 8500
+#define BMP380_MIN_PRES 3000000
+#define BMP380_MAX_PRES 12500000
+
+#define BMP380_CMD_NOOP 0x00
+#define BMP380_CMD_EXTMODE_EN_MID 0x34
+#define BMP380_CMD_FIFO_FLUSH 0xB0
+#define BMP380_CMD_SOFT_RESET 0xB6
+
+#define BMP380_STATUS_CMD_RDY_MASK BIT(4)
+#define BMP380_STATUS_DRDY_PRESS_MASK BIT(5)
+#define BMP380_STATUS_DRDY_TEMP_MASK BIT(6)
+
+#define BMP380_ERR_FATAL_MASK BIT(0)
+#define BMP380_ERR_CMD_MASK BIT(1)
+#define BMP380_ERR_CONF_MASK BIT(2)
+
+#define BMP380_TEMP_SKIPPED 0x800000
+#define BMP380_PRESS_SKIPPED 0x800000
+
/* BMP280 specific registers */
#define BMP280_REG_HUMIDITY_LSB 0xFE
#define BMP280_REG_HUMIDITY_MSB 0xFD
@@ -13,6 +94,9 @@
#define BMP280_REG_PRESS_LSB 0xF8
#define BMP280_REG_PRESS_MSB 0xF7
+/* Helper mask to truncate excess 4 bits on pressure and temp readings */
+#define BMP280_MEAS_TRIM_MASK GENMASK(24, 4)
+
#define BMP280_REG_CONFIG 0xF5
#define BMP280_REG_CTRL_MEAS 0xF4
#define BMP280_REG_STATUS 0xF3
@@ -32,44 +116,46 @@
#define BMP280_REG_COMP_PRESS_START 0x8E
#define BMP280_COMP_PRESS_REG_COUNT 18
-#define BMP280_FILTER_MASK (BIT(4) | BIT(3) | BIT(2))
+#define BMP280_COMP_H5_MASK GENMASK(15, 4)
+
+#define BMP280_CONTIGUOUS_CALIB_REGS (BMP280_COMP_TEMP_REG_COUNT + \
+ BMP280_COMP_PRESS_REG_COUNT)
+
+#define BMP280_FILTER_MASK GENMASK(4, 2)
#define BMP280_FILTER_OFF 0
-#define BMP280_FILTER_2X BIT(2)
-#define BMP280_FILTER_4X BIT(3)
-#define BMP280_FILTER_8X (BIT(3) | BIT(2))
-#define BMP280_FILTER_16X BIT(4)
+#define BMP280_FILTER_2X 1
+#define BMP280_FILTER_4X 2
+#define BMP280_FILTER_8X 3
+#define BMP280_FILTER_16X 4
-#define BMP280_OSRS_HUMIDITY_MASK (BIT(2) | BIT(1) | BIT(0))
-#define BMP280_OSRS_HUMIDITIY_X(osrs_h) ((osrs_h) << 0)
+#define BMP280_OSRS_HUMIDITY_MASK GENMASK(2, 0)
#define BMP280_OSRS_HUMIDITY_SKIP 0
-#define BMP280_OSRS_HUMIDITY_1X BMP280_OSRS_HUMIDITIY_X(1)
-#define BMP280_OSRS_HUMIDITY_2X BMP280_OSRS_HUMIDITIY_X(2)
-#define BMP280_OSRS_HUMIDITY_4X BMP280_OSRS_HUMIDITIY_X(3)
-#define BMP280_OSRS_HUMIDITY_8X BMP280_OSRS_HUMIDITIY_X(4)
-#define BMP280_OSRS_HUMIDITY_16X BMP280_OSRS_HUMIDITIY_X(5)
+#define BMP280_OSRS_HUMIDITY_1X 1
+#define BMP280_OSRS_HUMIDITY_2X 2
+#define BMP280_OSRS_HUMIDITY_4X 3
+#define BMP280_OSRS_HUMIDITY_8X 4
+#define BMP280_OSRS_HUMIDITY_16X 5
-#define BMP280_OSRS_TEMP_MASK (BIT(7) | BIT(6) | BIT(5))
+#define BMP280_OSRS_TEMP_MASK GENMASK(7, 5)
#define BMP280_OSRS_TEMP_SKIP 0
-#define BMP280_OSRS_TEMP_X(osrs_t) ((osrs_t) << 5)
-#define BMP280_OSRS_TEMP_1X BMP280_OSRS_TEMP_X(1)
-#define BMP280_OSRS_TEMP_2X BMP280_OSRS_TEMP_X(2)
-#define BMP280_OSRS_TEMP_4X BMP280_OSRS_TEMP_X(3)
-#define BMP280_OSRS_TEMP_8X BMP280_OSRS_TEMP_X(4)
-#define BMP280_OSRS_TEMP_16X BMP280_OSRS_TEMP_X(5)
-
-#define BMP280_OSRS_PRESS_MASK (BIT(4) | BIT(3) | BIT(2))
+#define BMP280_OSRS_TEMP_1X 1
+#define BMP280_OSRS_TEMP_2X 2
+#define BMP280_OSRS_TEMP_4X 3
+#define BMP280_OSRS_TEMP_8X 4
+#define BMP280_OSRS_TEMP_16X 5
+
+#define BMP280_OSRS_PRESS_MASK GENMASK(4, 2)
#define BMP280_OSRS_PRESS_SKIP 0
-#define BMP280_OSRS_PRESS_X(osrs_p) ((osrs_p) << 2)
-#define BMP280_OSRS_PRESS_1X BMP280_OSRS_PRESS_X(1)
-#define BMP280_OSRS_PRESS_2X BMP280_OSRS_PRESS_X(2)
-#define BMP280_OSRS_PRESS_4X BMP280_OSRS_PRESS_X(3)
-#define BMP280_OSRS_PRESS_8X BMP280_OSRS_PRESS_X(4)
-#define BMP280_OSRS_PRESS_16X BMP280_OSRS_PRESS_X(5)
-
-#define BMP280_MODE_MASK (BIT(1) | BIT(0))
+#define BMP280_OSRS_PRESS_1X 1
+#define BMP280_OSRS_PRESS_2X 2
+#define BMP280_OSRS_PRESS_4X 3
+#define BMP280_OSRS_PRESS_8X 4
+#define BMP280_OSRS_PRESS_16X 5
+
+#define BMP280_MODE_MASK GENMASK(1, 0)
#define BMP280_MODE_SLEEP 0
-#define BMP280_MODE_FORCED BIT(0)
-#define BMP280_MODE_NORMAL (BIT(1) | BIT(0))
+#define BMP280_MODE_FORCED 1
+#define BMP280_MODE_NORMAL 3
/* BMP180 specific registers */
#define BMP180_REG_OUT_XLSB 0xF8
@@ -79,19 +165,22 @@
#define BMP180_REG_CALIB_START 0xAA
#define BMP180_REG_CALIB_COUNT 22
+#define BMP180_MEAS_CTRL_MASK GENMASK(4, 0)
+#define BMP180_MEAS_TEMP 0x0E
+#define BMP180_MEAS_PRESS 0x14
#define BMP180_MEAS_SCO BIT(5)
-#define BMP180_MEAS_TEMP (0x0E | BMP180_MEAS_SCO)
-#define BMP180_MEAS_PRESS_X(oss) ((oss) << 6 | 0x14 | BMP180_MEAS_SCO)
-#define BMP180_MEAS_PRESS_1X BMP180_MEAS_PRESS_X(0)
-#define BMP180_MEAS_PRESS_2X BMP180_MEAS_PRESS_X(1)
-#define BMP180_MEAS_PRESS_4X BMP180_MEAS_PRESS_X(2)
-#define BMP180_MEAS_PRESS_8X BMP180_MEAS_PRESS_X(3)
+#define BMP180_OSRS_PRESS_MASK GENMASK(7, 6)
+#define BMP180_MEAS_PRESS_1X 0
+#define BMP180_MEAS_PRESS_2X 1
+#define BMP180_MEAS_PRESS_4X 2
+#define BMP180_MEAS_PRESS_8X 3
/* BMP180 and BMP280 common registers */
#define BMP280_REG_CTRL_MEAS 0xF4
#define BMP280_REG_RESET 0xE0
#define BMP280_REG_ID 0xD0
+#define BMP380_CHIP_ID 0x50
#define BMP180_CHIP_ID 0x55
#define BMP280_CHIP_ID 0x58
#define BME280_CHIP_ID 0x60
@@ -105,6 +194,7 @@
/* Regmap configurations */
extern const struct regmap_config bmp180_regmap_config;
extern const struct regmap_config bmp280_regmap_config;
+extern const struct regmap_config bmp380_regmap_config;
/* Probe called from different transports */
int bmp280_common_probe(struct device *dev,
diff --git a/drivers/iio/pressure/dlhl60d.c b/drivers/iio/pressure/dlhl60d.c
index 5f6bb3603a8b..f0b0d198c6d4 100644
--- a/drivers/iio/pressure/dlhl60d.c
+++ b/drivers/iio/pressure/dlhl60d.c
@@ -129,9 +129,8 @@ static int dlh_read_direct(struct dlh_state *st,
if (ret)
return ret;
- *pressure = get_unaligned_be32(&st->rx_buf[1]) >> 8;
- *temperature = get_unaligned_be32(&st->rx_buf[3]) &
- GENMASK(DLH_NUM_TEMP_BITS - 1, 0);
+ *pressure = get_unaligned_be24(&st->rx_buf[1]);
+ *temperature = get_unaligned_be24(&st->rx_buf[4]);
return 0;
}
diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c
index 36fb7ae0d0a9..984a3f511a1a 100644
--- a/drivers/iio/pressure/dps310.c
+++ b/drivers/iio/pressure/dps310.c
@@ -89,6 +89,7 @@ struct dps310_data {
s32 c00, c10, c20, c30, c01, c11, c21;
s32 pressure_raw;
s32 temp_raw;
+ bool timeout_recovery_failed;
};
static const struct iio_chan_spec dps310_channels[] = {
@@ -159,6 +160,102 @@ static int dps310_get_coefs(struct dps310_data *data)
return 0;
}
+/*
+ * Some versions of the chip will read temperatures in the ~60C range when
+ * it's actually ~20C. This is the manufacturer recommended workaround
+ * to correct the issue. The registers used below are undocumented.
+ */
+static int dps310_temp_workaround(struct dps310_data *data)
+{
+ int rc;
+ int reg;
+
+ rc = regmap_read(data->regmap, 0x32, &reg);
+ if (rc)
+ return rc;
+
+ /*
+ * If bit 1 is set then the device is okay, and the workaround does not
+ * need to be applied
+ */
+ if (reg & BIT(1))
+ return 0;
+
+ rc = regmap_write(data->regmap, 0x0e, 0xA5);
+ if (rc)
+ return rc;
+
+ rc = regmap_write(data->regmap, 0x0f, 0x96);
+ if (rc)
+ return rc;
+
+ rc = regmap_write(data->regmap, 0x62, 0x02);
+ if (rc)
+ return rc;
+
+ rc = regmap_write(data->regmap, 0x0e, 0x00);
+ if (rc)
+ return rc;
+
+ return regmap_write(data->regmap, 0x0f, 0x00);
+}
+
+static int dps310_startup(struct dps310_data *data)
+{
+ int rc;
+ int ready;
+
+ /*
+ * Set up pressure sensor in single sample, one measurement per second
+ * mode
+ */
+ rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0);
+ if (rc)
+ return rc;
+
+ /*
+ * Set up external (MEMS) temperature sensor in single sample, one
+ * measurement per second mode
+ */
+ rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT);
+ if (rc)
+ return rc;
+
+ /* Temp and pressure shifts are disabled when PRC <= 8 */
+ rc = regmap_write_bits(data->regmap, DPS310_CFG_REG,
+ DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0);
+ if (rc)
+ return rc;
+
+ /* MEAS_CFG doesn't update correctly unless first written with 0 */
+ rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
+ DPS310_MEAS_CTRL_BITS, 0);
+ if (rc)
+ return rc;
+
+ /* Turn on temperature and pressure measurement in the background */
+ rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
+ DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN |
+ DPS310_TEMP_EN | DPS310_BACKGROUND);
+ if (rc)
+ return rc;
+
+ /*
+ * Calibration coefficients required for reporting temperature.
+ * They are available 40ms after the device has started
+ */
+ rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
+ ready & DPS310_COEF_RDY, 10000, 40000);
+ if (rc)
+ return rc;
+
+ rc = dps310_get_coefs(data);
+ if (rc)
+ return rc;
+
+ return dps310_temp_workaround(data);
+}
+
static int dps310_get_pres_precision(struct dps310_data *data)
{
int rc;
@@ -297,11 +394,69 @@ static int dps310_get_temp_k(struct dps310_data *data)
return scale_factors[ilog2(rc)];
}
+static int dps310_reset_wait(struct dps310_data *data)
+{
+ int rc;
+
+ rc = regmap_write(data->regmap, DPS310_RESET, DPS310_RESET_MAGIC);
+ if (rc)
+ return rc;
+
+ /* Wait for device chip access: 2.5ms in specification */
+ usleep_range(2500, 12000);
+ return 0;
+}
+
+static int dps310_reset_reinit(struct dps310_data *data)
+{
+ int rc;
+
+ rc = dps310_reset_wait(data);
+ if (rc)
+ return rc;
+
+ return dps310_startup(data);
+}
+
+static int dps310_ready_status(struct dps310_data *data, int ready_bit, int timeout)
+{
+ int sleep = DPS310_POLL_SLEEP_US(timeout);
+ int ready;
+
+ return regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, ready & ready_bit,
+ sleep, timeout);
+}
+
+static int dps310_ready(struct dps310_data *data, int ready_bit, int timeout)
+{
+ int rc;
+
+ rc = dps310_ready_status(data, ready_bit, timeout);
+ if (rc) {
+ if (rc == -ETIMEDOUT && !data->timeout_recovery_failed) {
+ /* Reset and reinitialize the chip. */
+ if (dps310_reset_reinit(data)) {
+ data->timeout_recovery_failed = true;
+ } else {
+ /* Try again to get sensor ready status. */
+ if (dps310_ready_status(data, ready_bit, timeout))
+ data->timeout_recovery_failed = true;
+ else
+ return 0;
+ }
+ }
+
+ return rc;
+ }
+
+ data->timeout_recovery_failed = false;
+ return 0;
+}
+
static int dps310_read_pres_raw(struct dps310_data *data)
{
int rc;
int rate;
- int ready;
int timeout;
s32 raw;
u8 val[3];
@@ -313,9 +468,7 @@ static int dps310_read_pres_raw(struct dps310_data *data)
timeout = DPS310_POLL_TIMEOUT_US(rate);
/* Poll for sensor readiness; base the timeout upon the sample rate. */
- rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
- ready & DPS310_PRS_RDY,
- DPS310_POLL_SLEEP_US(timeout), timeout);
+ rc = dps310_ready(data, DPS310_PRS_RDY, timeout);
if (rc)
goto done;
@@ -352,7 +505,6 @@ static int dps310_read_temp_raw(struct dps310_data *data)
{
int rc;
int rate;
- int ready;
int timeout;
if (mutex_lock_interruptible(&data->lock))
@@ -362,10 +514,8 @@ static int dps310_read_temp_raw(struct dps310_data *data)
timeout = DPS310_POLL_TIMEOUT_US(rate);
/* Poll for sensor readiness; base the timeout upon the sample rate. */
- rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
- ready & DPS310_TMP_RDY,
- DPS310_POLL_SLEEP_US(timeout), timeout);
- if (rc < 0)
+ rc = dps310_ready(data, DPS310_TMP_RDY, timeout);
+ if (rc)
goto done;
rc = dps310_read_temp_ready(data);
@@ -660,7 +810,7 @@ static void dps310_reset(void *action_data)
{
struct dps310_data *data = action_data;
- regmap_write(data->regmap, DPS310_RESET, DPS310_RESET_MAGIC);
+ dps310_reset_wait(data);
}
static const struct regmap_config dps310_regmap_config = {
@@ -677,52 +827,12 @@ static const struct iio_info dps310_info = {
.write_raw = dps310_write_raw,
};
-/*
- * Some verions of chip will read temperatures in the ~60C range when
- * its actually ~20C. This is the manufacturer recommended workaround
- * to correct the issue. The registers used below are undocumented.
- */
-static int dps310_temp_workaround(struct dps310_data *data)
-{
- int rc;
- int reg;
-
- rc = regmap_read(data->regmap, 0x32, &reg);
- if (rc < 0)
- return rc;
-
- /*
- * If bit 1 is set then the device is okay, and the workaround does not
- * need to be applied
- */
- if (reg & BIT(1))
- return 0;
-
- rc = regmap_write(data->regmap, 0x0e, 0xA5);
- if (rc < 0)
- return rc;
-
- rc = regmap_write(data->regmap, 0x0f, 0x96);
- if (rc < 0)
- return rc;
-
- rc = regmap_write(data->regmap, 0x62, 0x02);
- if (rc < 0)
- return rc;
-
- rc = regmap_write(data->regmap, 0x0e, 0x00);
- if (rc < 0)
- return rc;
-
- return regmap_write(data->regmap, 0x0f, 0x00);
-}
-
static int dps310_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct dps310_data *data;
struct iio_dev *iio;
- int rc, ready;
+ int rc;
iio = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!iio)
@@ -747,54 +857,8 @@ static int dps310_probe(struct i2c_client *client,
if (rc)
return rc;
- /*
- * Set up pressure sensor in single sample, one measurement per second
- * mode
- */
- rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0);
-
- /*
- * Set up external (MEMS) temperature sensor in single sample, one
- * measurement per second mode
- */
- rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT);
- if (rc < 0)
- return rc;
-
- /* Temp and pressure shifts are disabled when PRC <= 8 */
- rc = regmap_write_bits(data->regmap, DPS310_CFG_REG,
- DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0);
- if (rc < 0)
- return rc;
-
- /* MEAS_CFG doesn't update correctly unless first written with 0 */
- rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
- DPS310_MEAS_CTRL_BITS, 0);
- if (rc < 0)
- return rc;
-
- /* Turn on temperature and pressure measurement in the background */
- rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG,
- DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN |
- DPS310_TEMP_EN | DPS310_BACKGROUND);
- if (rc < 0)
- return rc;
-
- /*
- * Calibration coefficients required for reporting temperature.
- * They are available 40ms after the device has started
- */
- rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready,
- ready & DPS310_COEF_RDY, 10000, 40000);
- if (rc < 0)
- return rc;
-
- rc = dps310_get_coefs(data);
- if (rc < 0)
- return rc;
-
- rc = dps310_temp_workaround(data);
- if (rc < 0)
+ rc = dps310_startup(data);
+ if (rc)
return rc;
rc = devm_iio_device_register(&client->dev, iio);
diff --git a/drivers/iio/pressure/icp10100.c b/drivers/iio/pressure/icp10100.c
index af4621eaa6b5..b62f28585db5 100644
--- a/drivers/iio/pressure/icp10100.c
+++ b/drivers/iio/pressure/icp10100.c
@@ -595,7 +595,7 @@ static int icp10100_probe(struct i2c_client *client,
return devm_iio_device_register(&client->dev, indio_dev);
}
-static int __maybe_unused icp10100_suspend(struct device *dev)
+static int icp10100_suspend(struct device *dev)
{
struct icp10100_state *st = iio_priv(dev_get_drvdata(dev));
int ret;
@@ -607,7 +607,7 @@ static int __maybe_unused icp10100_suspend(struct device *dev)
return ret;
}
-static int __maybe_unused icp10100_resume(struct device *dev)
+static int icp10100_resume(struct device *dev)
{
struct icp10100_state *st = iio_priv(dev_get_drvdata(dev));
int ret;
@@ -626,8 +626,8 @@ out_unlock:
return ret;
}
-static UNIVERSAL_DEV_PM_OPS(icp10100_pm, icp10100_suspend, icp10100_resume,
- NULL);
+static DEFINE_RUNTIME_DEV_PM_OPS(icp10100_pm, icp10100_suspend, icp10100_resume,
+ NULL);
static const struct of_device_id icp10100_of_match[] = {
{
@@ -646,7 +646,7 @@ MODULE_DEVICE_TABLE(i2c, icp10100_id);
static struct i2c_driver icp10100_driver = {
.driver = {
.name = "icp10100",
- .pm = &icp10100_pm,
+ .pm = pm_ptr(&icp10100_pm),
.of_match_table = icp10100_of_match,
},
.probe = icp10100_probe,
diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h
index 156e6a72dc5c..6e11bea784fa 100644
--- a/drivers/iio/pressure/st_pressure.h
+++ b/drivers/iio/pressure/st_pressure.h
@@ -22,6 +22,7 @@ enum st_press_type {
LPS33HW,
LPS35HW,
LPS22HH,
+ LPS22DF,
ST_PRESS_MAX,
};
@@ -32,6 +33,7 @@ enum st_press_type {
#define LPS33HW_PRESS_DEV_NAME "lps33hw"
#define LPS35HW_PRESS_DEV_NAME "lps35hw"
#define LPS22HH_PRESS_DEV_NAME "lps22hh"
+#define LPS22DF_PRESS_DEV_NAME "lps22df"
/**
* struct st_sensors_platform_data - default press platform data
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 76913a2028d2..80176e3083af 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -552,6 +552,76 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.multi_read_bit = false,
.bootime = 2,
},
+ {
+ /*
+ * CUSTOM VALUES FOR LPS22DF SENSOR
+ * See LPS22DF datasheet:
+ * http://www.st.com/resource/en/datasheet/lps22df.pdf
+ */
+ .wai = 0xb4,
+ .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+ .sensors_supported = {
+ [0] = LPS22DF_PRESS_DEV_NAME,
+ },
+ .ch = (struct iio_chan_spec *)st_press_lps22hb_channels,
+ .num_ch = ARRAY_SIZE(st_press_lps22hb_channels),
+ .odr = {
+ .addr = 0x10,
+ .mask = 0x78,
+ .odr_avl = {
+ { .hz = 1, .value = 0x01 },
+ { .hz = 4, .value = 0x02 },
+ { .hz = 10, .value = 0x03 },
+ { .hz = 25, .value = 0x04 },
+ { .hz = 50, .value = 0x05 },
+ { .hz = 75, .value = 0x06 },
+ { .hz = 100, .value = 0x07 },
+ { .hz = 200, .value = 0x08 },
+ },
+ },
+ .pw = {
+ .addr = 0x10,
+ .mask = 0x78,
+ .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+ },
+ .fs = {
+ .fs_avl = {
+ /*
+ * Pressure and temperature sensitivity values
+ * as defined in table 2 of LPS22DF datasheet.
+ */
+ [0] = {
+ .num = ST_PRESS_FS_AVL_1260MB,
+ .gain = ST_PRESS_KPASCAL_NANO_SCALE,
+ .gain2 = ST_PRESS_LPS22HB_LSB_PER_CELSIUS,
+ },
+ },
+ },
+ .bdu = {
+ .addr = 0x11,
+ .mask = BIT(3),
+ },
+ .drdy_irq = {
+ .int1 = {
+ .addr = 0x13,
+ .mask = BIT(5),
+ .addr_od = 0x12,
+ .mask_od = BIT(1),
+ },
+ .addr_ihl = 0x12,
+ .mask_ihl = BIT(3),
+ .stat_drdy = {
+ .addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+ .mask = 0x03,
+ },
+ },
+ .sim = {
+ .addr = 0x0E,
+ .value = BIT(5),
+ },
+ .multi_read_bit = false,
+ .bootime = 2,
+ },
};
static int st_press_write_raw(struct iio_dev *indio_dev,
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index 7035777fd988..58fede861891 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -47,6 +47,10 @@ static const struct of_device_id st_press_of_match[] = {
.compatible = "st,lps22hh",
.data = LPS22HH_PRESS_DEV_NAME,
},
+ {
+ .compatible = "st,lps22df",
+ .data = LPS22DF_PRESS_DEV_NAME,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_press_of_match);
@@ -67,6 +71,7 @@ static const struct i2c_device_id st_press_id_table[] = {
{ LPS33HW_PRESS_DEV_NAME, LPS33HW },
{ LPS35HW_PRESS_DEV_NAME, LPS35HW },
{ LPS22HH_PRESS_DEV_NAME, LPS22HH },
+ { LPS22DF_PRESS_DEV_NAME, LPS22DF },
{},
};
MODULE_DEVICE_TABLE(i2c, st_press_id_table);
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index bfab8e7fb061..25cca5ad7c55 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -51,6 +51,10 @@ static const struct of_device_id st_press_of_match[] = {
.compatible = "st,lps22hh",
.data = LPS22HH_PRESS_DEV_NAME,
},
+ {
+ .compatible = "st,lps22df",
+ .data = LPS22DF_PRESS_DEV_NAME,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_press_of_match);
@@ -97,6 +101,7 @@ static const struct spi_device_id st_press_id_table[] = {
{ LPS33HW_PRESS_DEV_NAME },
{ LPS35HW_PRESS_DEV_NAME },
{ LPS22HH_PRESS_DEV_NAME },
+ { LPS22DF_PRESS_DEV_NAME },
{ "lps001wp-press" },
{ "lps25h-press", },
{ "lps331ap-press" },
diff --git a/drivers/iio/proximity/srf04.c b/drivers/iio/proximity/srf04.c
index 05015351a34a..faf2f806ce80 100644
--- a/drivers/iio/proximity/srf04.c
+++ b/drivers/iio/proximity/srf04.c
@@ -359,7 +359,7 @@ static int srf04_remove(struct platform_device *pdev)
return 0;
}
-static int __maybe_unused srf04_pm_runtime_suspend(struct device *dev)
+static int srf04_pm_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = container_of(dev,
struct platform_device, dev);
@@ -371,7 +371,7 @@ static int __maybe_unused srf04_pm_runtime_suspend(struct device *dev)
return 0;
}
-static int __maybe_unused srf04_pm_runtime_resume(struct device *dev)
+static int srf04_pm_runtime_resume(struct device *dev)
{
struct platform_device *pdev = container_of(dev,
struct platform_device, dev);
@@ -385,8 +385,8 @@ static int __maybe_unused srf04_pm_runtime_resume(struct device *dev)
}
static const struct dev_pm_ops srf04_pm_ops = {
- SET_RUNTIME_PM_OPS(srf04_pm_runtime_suspend,
- srf04_pm_runtime_resume, NULL)
+ RUNTIME_PM_OPS(srf04_pm_runtime_suspend,
+ srf04_pm_runtime_resume, NULL)
};
static struct platform_driver srf04_driver = {
@@ -395,7 +395,7 @@ static struct platform_driver srf04_driver = {
.driver = {
.name = "srf04-gpio",
.of_match_table = of_srf04_match,
- .pm = &srf04_pm_ops,
+ .pm = pm_ptr(&srf04_pm_ops),
},
};
diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index ea7318b508ea..0e4747ccd3cf 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -965,7 +965,7 @@ static int sx9310_probe(struct i2c_client *client)
return sx_common_probe(client, &sx9310_chip_info, &sx9310_regmap_config);
}
-static int __maybe_unused sx9310_suspend(struct device *dev)
+static int sx9310_suspend(struct device *dev)
{
struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
u8 ctrl0;
@@ -991,7 +991,7 @@ out:
return ret;
}
-static int __maybe_unused sx9310_resume(struct device *dev)
+static int sx9310_resume(struct device *dev)
{
struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
int ret;
@@ -1013,7 +1013,7 @@ out:
return 0;
}
-static SIMPLE_DEV_PM_OPS(sx9310_pm_ops, sx9310_suspend, sx9310_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(sx9310_pm_ops, sx9310_suspend, sx9310_resume);
static const struct acpi_device_id sx9310_acpi_match[] = {
{ "STH9310", SX9310_WHOAMI_VALUE },
@@ -1041,7 +1041,7 @@ static struct i2c_driver sx9310_driver = {
.name = "sx9310",
.acpi_match_table = sx9310_acpi_match,
.of_match_table = sx9310_of_match,
- .pm = &sx9310_pm_ops,
+ .pm = pm_sleep_ptr(&sx9310_pm_ops),
/*
* Lots of i2c transfers in probe + over 200 ms waiting in
diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c
index edb5a2ce4e27..977cf17cec52 100644
--- a/drivers/iio/proximity/sx9324.c
+++ b/drivers/iio/proximity/sx9324.c
@@ -1073,7 +1073,7 @@ static int sx9324_probe(struct i2c_client *client)
return sx_common_probe(client, &sx9324_chip_info, &sx9324_regmap_config);
}
-static int __maybe_unused sx9324_suspend(struct device *dev)
+static int sx9324_suspend(struct device *dev)
{
struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
unsigned int regval;
@@ -1098,7 +1098,7 @@ out:
return ret;
}
-static int __maybe_unused sx9324_resume(struct device *dev)
+static int sx9324_resume(struct device *dev)
{
struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
int ret;
@@ -1114,7 +1114,7 @@ static int __maybe_unused sx9324_resume(struct device *dev)
return 0;
}
-static SIMPLE_DEV_PM_OPS(sx9324_pm_ops, sx9324_suspend, sx9324_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(sx9324_pm_ops, sx9324_suspend, sx9324_resume);
static const struct acpi_device_id sx9324_acpi_match[] = {
{ "STH9324", SX9324_WHOAMI_VALUE },
@@ -1139,7 +1139,7 @@ static struct i2c_driver sx9324_driver = {
.name = "sx9324",
.acpi_match_table = sx9324_acpi_match,
.of_match_table = sx9324_of_match,
- .pm = &sx9324_pm_ops,
+ .pm = pm_sleep_ptr(&sx9324_pm_ops),
/*
* Lots of i2c transfers in probe + over 200 ms waiting in
diff --git a/drivers/iio/proximity/sx9360.c b/drivers/iio/proximity/sx9360.c
index d9a12e6be6ca..7fa2213d23ba 100644
--- a/drivers/iio/proximity/sx9360.c
+++ b/drivers/iio/proximity/sx9360.c
@@ -819,7 +819,7 @@ static int sx9360_probe(struct i2c_client *client)
return sx_common_probe(client, &sx9360_chip_info, &sx9360_regmap_config);
}
-static int __maybe_unused sx9360_suspend(struct device *dev)
+static int sx9360_suspend(struct device *dev)
{
struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
unsigned int regval;
@@ -844,7 +844,7 @@ out:
return ret;
}
-static int __maybe_unused sx9360_resume(struct device *dev)
+static int sx9360_resume(struct device *dev)
{
struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
int ret;
@@ -861,7 +861,7 @@ static int __maybe_unused sx9360_resume(struct device *dev)
return 0;
}
-static SIMPLE_DEV_PM_OPS(sx9360_pm_ops, sx9360_suspend, sx9360_resume);
+static DEFINE_SIMPLE_DEV_PM_OPS(sx9360_pm_ops, sx9360_suspend, sx9360_resume);
static const struct acpi_device_id sx9360_acpi_match[] = {
{ "STH9360", SX9360_WHOAMI_VALUE },
@@ -886,7 +886,7 @@ static struct i2c_driver sx9360_driver = {
.name = "sx9360",
.acpi_match_table = sx9360_acpi_match,
.of_match_table = sx9360_of_match,
- .pm = &sx9360_pm_ops,
+ .pm = pm_sleep_ptr(&sx9360_pm_ops),
/*
* Lots of i2c transfers in probe + over 200 ms waiting in
diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c
index 0808bb865928..8eb0f962ed25 100644
--- a/drivers/iio/temperature/mlx90614.c
+++ b/drivers/iio/temperature/mlx90614.c
@@ -79,16 +79,15 @@ struct mlx90614_data {
/* Bandwidth values for IIR filtering */
static const int mlx90614_iir_values[] = {77, 31, 20, 15, 723, 153, 110, 86};
-static IIO_CONST_ATTR(in_temp_object_filter_low_pass_3db_frequency_available,
- "0.15 0.20 0.31 0.77 0.86 1.10 1.53 7.23");
-
-static struct attribute *mlx90614_attributes[] = {
- &iio_const_attr_in_temp_object_filter_low_pass_3db_frequency_available.dev_attr.attr,
- NULL,
-};
-
-static const struct attribute_group mlx90614_attr_group = {
- .attrs = mlx90614_attributes,
+static const int mlx90614_freqs[][2] = {
+ {0, 150000},
+ {0, 200000},
+ {0, 310000},
+ {0, 770000},
+ {0, 860000},
+ {1, 100000},
+ {1, 530000},
+ {7, 230000}
};
/*
@@ -373,6 +372,22 @@ static int mlx90614_write_raw_get_fmt(struct iio_dev *indio_dev,
}
}
+static int mlx90614_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ *vals = (int *)mlx90614_freqs;
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ *length = 2 * ARRAY_SIZE(mlx90614_freqs);
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
static const struct iio_chan_spec mlx90614_channels[] = {
{
.type = IIO_TEMP,
@@ -389,6 +404,8 @@ static const struct iio_chan_spec mlx90614_channels[] = {
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_CALIBEMISSIVITY) |
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+ .info_mask_separate_available =
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE),
},
@@ -401,6 +418,8 @@ static const struct iio_chan_spec mlx90614_channels[] = {
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_CALIBEMISSIVITY) |
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+ .info_mask_separate_available =
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE),
},
@@ -410,7 +429,7 @@ static const struct iio_info mlx90614_info = {
.read_raw = mlx90614_read_raw,
.write_raw = mlx90614_write_raw,
.write_raw_get_fmt = mlx90614_write_raw_get_fmt,
- .attrs = &mlx90614_attr_group,
+ .read_avail = mlx90614_read_avail,
};
#ifdef CONFIG_PM
diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
index e8ef47147e2b..f6dec0e5f097 100644
--- a/drivers/iio/temperature/mlx90632.c
+++ b/drivers/iio/temperature/mlx90632.c
@@ -18,6 +18,7 @@
#include <linux/math64.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
@@ -128,6 +129,7 @@
* calculations
* @object_ambient_temperature: Ambient temperature at object (might differ of
* the ambient temperature of sensor.
+ * @regulator: Regulator of the device
*/
struct mlx90632_data {
struct i2c_client *client;
@@ -136,6 +138,7 @@ struct mlx90632_data {
u16 emissivity;
u8 mtyp;
u32 object_ambient_temperature;
+ struct regulator *regulator;
};
static const struct regmap_range mlx90632_volatile_reg_range[] = {
@@ -208,6 +211,15 @@ static s32 mlx90632_pwr_continuous(struct regmap *regmap)
}
/**
+ * mlx90632_reset_delay() - Give the mlx90632 some time to reset properly
+ * If this is not done, the following I2C command(s) will not be accepted.
+ */
+static void mlx90632_reset_delay(void)
+{
+ usleep_range(150, 200);
+}
+
+/**
* mlx90632_perform_measurement() - Trigger and retrieve current measurement cycle
* @data: pointer to mlx90632_data object containing regmap information
*
@@ -248,11 +260,7 @@ static int mlx90632_set_meas_type(struct regmap *regmap, u8 type)
if (ret < 0)
return ret;
- /*
- * Give the mlx90632 some time to reset properly before sending a new I2C command
- * if this is not done, the following I2C command(s) will not be accepted.
- */
- usleep_range(150, 200);
+ mlx90632_reset_delay();
ret = regmap_write_bits(regmap, MLX90632_REG_CONTROL,
(MLX90632_CFG_MTYP_MASK | MLX90632_CFG_PWR_MASK),
@@ -841,6 +849,32 @@ static int mlx90632_wakeup(struct mlx90632_data *data)
return mlx90632_pwr_continuous(data->regmap);
}
+static void mlx90632_disable_regulator(void *_data)
+{
+ struct mlx90632_data *data = _data;
+ int ret;
+
+ ret = regulator_disable(data->regulator);
+ if (ret < 0)
+ dev_err(regmap_get_device(data->regmap),
+ "Failed to disable power regulator: %d\n", ret);
+}
+
+static int mlx90632_enable_regulator(struct mlx90632_data *data)
+{
+ int ret;
+
+ ret = regulator_enable(data->regulator);
+ if (ret < 0) {
+ dev_err(regmap_get_device(data->regmap), "Failed to enable power regulator!\n");
+ return ret;
+ }
+
+ mlx90632_reset_delay();
+
+ return ret;
+}
+
static int mlx90632_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -876,6 +910,23 @@ static int mlx90632_probe(struct i2c_client *client,
indio_dev->channels = mlx90632_channels;
indio_dev->num_channels = ARRAY_SIZE(mlx90632_channels);
+ mlx90632->regulator = devm_regulator_get(&client->dev, "vdd");
+ if (IS_ERR(mlx90632->regulator))
+ return dev_err_probe(&client->dev, PTR_ERR(mlx90632->regulator),
+ "failed to get vdd regulator");
+
+ ret = mlx90632_enable_regulator(mlx90632);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_add_action_or_reset(&client->dev, mlx90632_disable_regulator,
+ mlx90632);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to setup regulator cleanup action %d\n",
+ ret);
+ return ret;
+ }
+
ret = mlx90632_wakeup(mlx90632);
if (ret < 0) {
dev_err(&client->dev, "Wakeup failed: %d\n", ret);
diff --git a/drivers/iio/test/iio-test-rescale.c b/drivers/iio/test/iio-test-rescale.c
index cc782ccff880..31ee55a6faed 100644
--- a/drivers/iio/test/iio-test-rescale.c
+++ b/drivers/iio/test/iio-test-rescale.c
@@ -29,7 +29,7 @@ struct rescale_tc_data {
const char *expected_off;
};
-const struct rescale_tc_data scale_cases[] = {
+static const struct rescale_tc_data scale_cases[] = {
/*
* Typical use cases
*/
@@ -477,7 +477,7 @@ const struct rescale_tc_data scale_cases[] = {
},
};
-const struct rescale_tc_data offset_cases[] = {
+static const struct rescale_tc_data offset_cases[] = {
/*
* Typical use cases
*/
diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c
index 808f6e7a8048..25debded65a8 100644
--- a/drivers/interconnect/core.c
+++ b/drivers/interconnect/core.c
@@ -1057,29 +1057,25 @@ EXPORT_SYMBOL_GPL(icc_provider_add);
/**
* icc_provider_del() - delete previously added interconnect provider
* @provider: the interconnect provider that will be removed from topology
- *
- * Return: 0 on success, or an error code otherwise
*/
-int icc_provider_del(struct icc_provider *provider)
+void icc_provider_del(struct icc_provider *provider)
{
mutex_lock(&icc_lock);
if (provider->users) {
pr_warn("interconnect provider still has %d users\n",
provider->users);
mutex_unlock(&icc_lock);
- return -EBUSY;
+ return;
}
if (!list_empty(&provider->nodes)) {
pr_warn("interconnect provider still has nodes\n");
mutex_unlock(&icc_lock);
- return -EBUSY;
+ return;
}
list_del(&provider->provider_list);
mutex_unlock(&icc_lock);
-
- return 0;
}
EXPORT_SYMBOL_GPL(icc_provider_del);
diff --git a/drivers/interconnect/imx/imx.c b/drivers/interconnect/imx/imx.c
index 48ffd59953bf..823d9be9771a 100644
--- a/drivers/interconnect/imx/imx.c
+++ b/drivers/interconnect/imx/imx.c
@@ -324,13 +324,13 @@ provider_del:
}
EXPORT_SYMBOL_GPL(imx_icc_register);
-int imx_icc_unregister(struct platform_device *pdev)
+void imx_icc_unregister(struct platform_device *pdev)
{
struct imx_icc_provider *imx_provider = platform_get_drvdata(pdev);
imx_icc_unregister_nodes(&imx_provider->provider);
- return icc_provider_del(&imx_provider->provider);
+ icc_provider_del(&imx_provider->provider);
}
EXPORT_SYMBOL_GPL(imx_icc_unregister);
diff --git a/drivers/interconnect/imx/imx.h b/drivers/interconnect/imx/imx.h
index e0a2ee173ecd..895907cdcb3b 100644
--- a/drivers/interconnect/imx/imx.h
+++ b/drivers/interconnect/imx/imx.h
@@ -103,6 +103,6 @@ int imx_icc_register(struct platform_device *pdev,
struct imx_icc_node_desc *nodes,
int nodes_count,
struct imx_icc_noc_setting *noc_settings);
-int imx_icc_unregister(struct platform_device *pdev);
+void imx_icc_unregister(struct platform_device *pdev);
#endif /* __DRIVERS_INTERCONNECT_IMX_H */
diff --git a/drivers/interconnect/imx/imx8mm.c b/drivers/interconnect/imx/imx8mm.c
index ae797412db96..b43325364aa3 100644
--- a/drivers/interconnect/imx/imx8mm.c
+++ b/drivers/interconnect/imx/imx8mm.c
@@ -88,7 +88,9 @@ static int imx8mm_icc_probe(struct platform_device *pdev)
static int imx8mm_icc_remove(struct platform_device *pdev)
{
- return imx_icc_unregister(pdev);
+ imx_icc_unregister(pdev);
+
+ return 0;
}
static struct platform_driver imx8mm_icc_driver = {
diff --git a/drivers/interconnect/imx/imx8mn.c b/drivers/interconnect/imx/imx8mn.c
index 1ce94c5bdd8c..8ce6d8e4bf5e 100644
--- a/drivers/interconnect/imx/imx8mn.c
+++ b/drivers/interconnect/imx/imx8mn.c
@@ -77,7 +77,9 @@ static int imx8mn_icc_probe(struct platform_device *pdev)
static int imx8mn_icc_remove(struct platform_device *pdev)
{
- return imx_icc_unregister(pdev);
+ imx_icc_unregister(pdev);
+
+ return 0;
}
static struct platform_driver imx8mn_icc_driver = {
diff --git a/drivers/interconnect/imx/imx8mp.c b/drivers/interconnect/imx/imx8mp.c
index 5f1c83ed157b..8bfaf173f1da 100644
--- a/drivers/interconnect/imx/imx8mp.c
+++ b/drivers/interconnect/imx/imx8mp.c
@@ -242,7 +242,9 @@ static int imx8mp_icc_probe(struct platform_device *pdev)
static int imx8mp_icc_remove(struct platform_device *pdev)
{
- return imx_icc_unregister(pdev);
+ imx_icc_unregister(pdev);
+
+ return 0;
}
static struct platform_driver imx8mp_icc_driver = {
diff --git a/drivers/interconnect/imx/imx8mq.c b/drivers/interconnect/imx/imx8mq.c
index 7f00a0511c6e..b6fb71305c99 100644
--- a/drivers/interconnect/imx/imx8mq.c
+++ b/drivers/interconnect/imx/imx8mq.c
@@ -87,7 +87,9 @@ static int imx8mq_icc_probe(struct platform_device *pdev)
static int imx8mq_icc_remove(struct platform_device *pdev)
{
- return imx_icc_unregister(pdev);
+ imx_icc_unregister(pdev);
+
+ return 0;
}
static struct platform_driver imx8mq_icc_driver = {
diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
index 25d5b4baf6f6..1a1c941635a2 100644
--- a/drivers/interconnect/qcom/Kconfig
+++ b/drivers/interconnect/qcom/Kconfig
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
config INTERCONNECT_QCOM
- bool "Qualcomm Network-on-Chip interconnect drivers"
+ tristate "Qualcomm Network-on-Chip interconnect drivers"
depends on ARCH_QCOM
help
Support for Qualcomm's Network-on-Chip interconnect hardware.
diff --git a/drivers/interconnect/qcom/icc-common.c b/drivers/interconnect/qcom/icc-common.c
index 0822ce207b5d..f27f4fdc4531 100644
--- a/drivers/interconnect/qcom/icc-common.c
+++ b/drivers/interconnect/qcom/icc-common.c
@@ -5,6 +5,7 @@
#include <linux/of.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include "icc-common.h"
@@ -32,3 +33,5 @@ struct icc_node_data *qcom_icc_xlate_extended(struct of_phandle_args *spec, void
return ndata;
}
EXPORT_SYMBOL_GPL(qcom_icc_xlate_extended);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index 7f6a70e0256a..39e43b957599 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -563,6 +563,8 @@ int qnoc_remove(struct platform_device *pdev)
icc_nodes_remove(&qp->provider);
clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
- return icc_provider_del(&qp->provider);
+ icc_provider_del(&qp->provider);
+
+ return 0;
}
EXPORT_SYMBOL(qnoc_remove);
diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
index 114bb8f64573..fd17291c61eb 100644
--- a/drivers/interconnect/qcom/icc-rpmh.c
+++ b/drivers/interconnect/qcom/icc-rpmh.c
@@ -251,7 +251,9 @@ int qcom_icc_rpmh_remove(struct platform_device *pdev)
struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
icc_nodes_remove(&qp->provider);
- return icc_provider_del(&qp->provider);
+ icc_provider_del(&qp->provider);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(qcom_icc_rpmh_remove);
diff --git a/drivers/interconnect/qcom/msm8974.c b/drivers/interconnect/qcom/msm8974.c
index 6fa0ad90fc3d..5ea192f1141d 100644
--- a/drivers/interconnect/qcom/msm8974.c
+++ b/drivers/interconnect/qcom/msm8974.c
@@ -749,7 +749,9 @@ static int msm8974_icc_remove(struct platform_device *pdev)
icc_nodes_remove(&qp->provider);
clk_bulk_disable_unprepare(qp->num_clks, qp->bus_clks);
- return icc_provider_del(&qp->provider);
+ icc_provider_del(&qp->provider);
+
+ return 0;
}
static const struct of_device_id msm8974_noc_of_match[] = {
diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c
index 4198656f4e59..ddbdf0943f94 100644
--- a/drivers/interconnect/qcom/osm-l3.c
+++ b/drivers/interconnect/qcom/osm-l3.c
@@ -217,7 +217,9 @@ static int qcom_osm_l3_remove(struct platform_device *pdev)
struct qcom_osm_l3_icc_provider *qp = platform_get_drvdata(pdev);
icc_nodes_remove(&qp->provider);
- return icc_provider_del(&qp->provider);
+ icc_provider_del(&qp->provider);
+
+ return 0;
}
static int qcom_osm_l3_probe(struct platform_device *pdev)
diff --git a/drivers/interconnect/qcom/sm8450.c b/drivers/interconnect/qcom/sm8450.c
index e821fd0b2f66..e3a12e3d6e06 100644
--- a/drivers/interconnect/qcom/sm8450.c
+++ b/drivers/interconnect/qcom/sm8450.c
@@ -1933,7 +1933,9 @@ static int qnoc_remove(struct platform_device *pdev)
struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
icc_nodes_remove(&qp->provider);
- return icc_provider_del(&qp->provider);
+ icc_provider_del(&qp->provider);
+
+ return 0;
}
static const struct of_device_id qnoc_of_match[] = {
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index d32b02336411..71f7edded9cf 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -2817,6 +2817,26 @@ static int arm_smmu_dev_disable_feature(struct device *dev,
}
}
+/*
+ * HiSilicon PCIe tune and trace device can be used to trace TLP headers on the
+ * PCIe link and save the data to memory by DMA. The hardware is restricted to
+ * use identity mapping only.
+ */
+#define IS_HISI_PTT_DEVICE(pdev) ((pdev)->vendor == PCI_VENDOR_ID_HUAWEI && \
+ (pdev)->device == 0xa12e)
+
+static int arm_smmu_def_domain_type(struct device *dev)
+{
+ if (dev_is_pci(dev)) {
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ if (IS_HISI_PTT_DEVICE(pdev))
+ return IOMMU_DOMAIN_IDENTITY;
+ }
+
+ return 0;
+}
+
static struct iommu_ops arm_smmu_ops = {
.capable = arm_smmu_capable,
.domain_alloc = arm_smmu_domain_alloc,
@@ -2831,6 +2851,7 @@ static struct iommu_ops arm_smmu_ops = {
.sva_unbind = arm_smmu_sva_unbind,
.sva_get_pasid = arm_smmu_sva_get_pasid,
.page_response = arm_smmu_page_response,
+ .def_domain_type = arm_smmu_def_domain_type,
.pgsize_bitmap = -1UL, /* Restricted during device attach */
.owner = THIS_MODULE,
.default_domain_ops = &(const struct iommu_domain_ops) {
diff --git a/drivers/ipack/ipack.c b/drivers/ipack/ipack.c
index b1c3198355e7..74d449858a61 100644
--- a/drivers/ipack/ipack.c
+++ b/drivers/ipack/ipack.c
@@ -429,8 +429,11 @@ int ipack_device_init(struct ipack_device *dev)
dev->dev.bus = &ipack_bus_type;
dev->dev.release = ipack_device_release;
dev->dev.parent = dev->bus->parent;
- dev_set_name(&dev->dev,
+ ret = dev_set_name(&dev->dev,
"ipack-dev.%u.%u", dev->bus->bus_nr, dev->slot);
+ if (ret)
+ return ret;
+
device_initialize(&dev->dev);
if (dev->bus->ops->set_clockrate(dev, 8))
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 94e9fb4cdd76..358ad56f6524 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -513,4 +513,5 @@ source "drivers/misc/cardreader/Kconfig"
source "drivers/misc/habanalabs/Kconfig"
source "drivers/misc/uacce/Kconfig"
source "drivers/misc/pvpanic/Kconfig"
+source "drivers/misc/mchp_pci1xxxx/Kconfig"
endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 2be8542616dd..ac9b3e757ba1 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -60,4 +60,5 @@ obj-$(CONFIG_XILINX_SDFEC) += xilinx_sdfec.o
obj-$(CONFIG_HISI_HIKEY_USB) += hisi_hikey_usb.o
obj-$(CONFIG_HI6421V600_IRQ) += hi6421v600-irq.o
obj-$(CONFIG_OPEN_DICE) += open-dice.o
-obj-$(CONFIG_VCPU_STALL_DETECTOR) += vcpu_stall_detector.o \ No newline at end of file
+obj-$(CONFIG_GP_PCI1XXXX) += mchp_pci1xxxx/
+obj-$(CONFIG_VCPU_STALL_DETECTOR) += vcpu_stall_detector.o
diff --git a/drivers/misc/altera-stapl/altera.c b/drivers/misc/altera-stapl/altera.c
index 075f3a36d512..a58b7cb81d98 100644
--- a/drivers/misc/altera-stapl/altera.c
+++ b/drivers/misc/altera-stapl/altera.c
@@ -1014,7 +1014,7 @@ exit_done:
* ...argument 0 is string ID
*/
count = strlen(msg_buff);
- strlcpy(&msg_buff[count],
+ strscpy(&msg_buff[count],
&p[str_table + args[0]],
ALTERA_MESSAGE_LENGTH - count);
break;
@@ -2146,7 +2146,7 @@ static int altera_get_note(u8 *p, s32 program_size, s32 *offset,
&p[note_table + (8 * i) + 4])];
if (value != NULL)
- strlcpy(value, value_ptr, vallen);
+ strscpy(value, value_ptr, vallen);
}
}
@@ -2162,13 +2162,13 @@ static int altera_get_note(u8 *p, s32 program_size, s32 *offset,
status = 0;
if (key != NULL)
- strlcpy(key, &p[note_strings +
+ strscpy(key, &p[note_strings +
get_unaligned_be32(
&p[note_table + (8 * i)])],
keylen);
if (value != NULL)
- strlcpy(value, &p[note_strings +
+ strscpy(value, &p[note_strings +
get_unaligned_be32(
&p[note_table + (8 * i) + 4])],
vallen);
diff --git a/drivers/misc/bcm-vk/bcm_vk_dev.c b/drivers/misc/bcm-vk/bcm_vk_dev.c
index a16b99bdaa13..d4a96137728d 100644
--- a/drivers/misc/bcm-vk/bcm_vk_dev.c
+++ b/drivers/misc/bcm-vk/bcm_vk_dev.c
@@ -1339,7 +1339,7 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_drvdata(pdev, vk);
irq = pci_alloc_irq_vectors(pdev,
- 1,
+ VK_MSIX_IRQ_MIN_REQ,
VK_MSIX_IRQ_MAX,
PCI_IRQ_MSI | PCI_IRQ_MSIX);
@@ -1401,7 +1401,7 @@ static int bcm_vk_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
bcm_vk_tty_set_irq_enabled(vk, i);
}
- id = ida_simple_get(&bcm_vk_ida, 0, 0, GFP_KERNEL);
+ id = ida_alloc(&bcm_vk_ida, GFP_KERNEL);
if (id < 0) {
err = id;
dev_err(dev, "unable to get id\n");
@@ -1500,7 +1500,7 @@ err_kfree_name:
misc_device->name = NULL;
err_ida_remove:
- ida_simple_remove(&bcm_vk_ida, id);
+ ida_free(&bcm_vk_ida, id);
err_irq:
for (i = 0; i < vk->num_irqs; i++)
@@ -1573,7 +1573,7 @@ static void bcm_vk_remove(struct pci_dev *pdev)
if (misc_device->name) {
misc_deregister(misc_device);
kfree(misc_device->name);
- ida_simple_remove(&bcm_vk_ida, vk->devid);
+ ida_free(&bcm_vk_ida, vk->devid);
}
for (i = 0; i < vk->num_irqs; i++)
devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i), vk);
diff --git a/drivers/misc/eeprom/eeprom.c b/drivers/misc/eeprom/eeprom.c
index 4a9445fea93d..8a841a75d893 100644
--- a/drivers/misc/eeprom/eeprom.c
+++ b/drivers/misc/eeprom/eeprom.c
@@ -136,7 +136,7 @@ static int eeprom_detect(struct i2c_client *client, struct i2c_board_info *info)
&& !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
return -ENODEV;
- strlcpy(info->type, "eeprom", I2C_NAME_SIZE);
+ strscpy(info->type, "eeprom", I2C_NAME_SIZE);
return 0;
}
diff --git a/drivers/misc/eeprom/idt_89hpesx.c b/drivers/misc/eeprom/idt_89hpesx.c
index ada2a3af36d7..bb3ed352b95f 100644
--- a/drivers/misc/eeprom/idt_89hpesx.c
+++ b/drivers/misc/eeprom/idt_89hpesx.c
@@ -1075,7 +1075,7 @@ static const struct i2c_device_id *idt_ee_match_id(struct fwnode_handle *fwnode)
return NULL;
p = strchr(compatible, ',');
- strlcpy(devname, p ? p + 1 : compatible, sizeof(devname));
+ strscpy(devname, p ? p + 1 : compatible, sizeof(devname));
/* Search through the device name */
while (id->name[0]) {
if (strcmp(devname, id->name) == 0)
diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c
index 5d9e3483b89d..7ff0b63c25e3 100644
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -1515,7 +1515,7 @@ static int fastrpc_get_info_from_dsp(struct fastrpc_user *fl, uint32_t *dsp_attr
args[1].ptr = (u64)(uintptr_t)&dsp_attr_buf[1];
args[1].length = dsp_attr_buf_len;
args[1].fd = -1;
- fl->pd = 1;
+ fl->pd = USER_PD;
return fastrpc_internal_invoke(fl, true, FASTRPC_DSP_UTILITIES_HANDLE,
FASTRPC_SCALARS(0, 1, 1), args);
diff --git a/drivers/misc/habanalabs/Kconfig b/drivers/misc/habanalabs/Kconfig
index 861c81006c6d..bd01d0d940c0 100644
--- a/drivers/misc/habanalabs/Kconfig
+++ b/drivers/misc/habanalabs/Kconfig
@@ -10,6 +10,7 @@ config HABANA_AI
select HWMON
select DMA_SHARED_BUFFER
select CRC32
+ select FW_LOADER
help
Enables PCIe card driver for Habana's AI Processors (AIP) that are
designed to accelerate Deep Learning inference and training workloads.
diff --git a/drivers/misc/habanalabs/Makefile b/drivers/misc/habanalabs/Makefile
index b35d7000c86b..a48a9e0969ed 100644
--- a/drivers/misc/habanalabs/Makefile
+++ b/drivers/misc/habanalabs/Makefile
@@ -8,13 +8,13 @@ obj-$(CONFIG_HABANA_AI) := habanalabs.o
include $(src)/common/Makefile
habanalabs-y += $(HL_COMMON_FILES)
-include $(src)/goya/Makefile
-habanalabs-y += $(HL_GOYA_FILES)
+include $(src)/gaudi2/Makefile
+habanalabs-y += $(HL_GAUDI2_FILES)
include $(src)/gaudi/Makefile
habanalabs-y += $(HL_GAUDI_FILES)
-include $(src)/gaudi2/Makefile
-habanalabs-y += $(HL_GAUDI2_FILES)
+include $(src)/goya/Makefile
+habanalabs-y += $(HL_GOYA_FILES)
habanalabs-$(CONFIG_DEBUG_FS) += common/debugfs.o
diff --git a/drivers/misc/habanalabs/common/command_buffer.c b/drivers/misc/habanalabs/common/command_buffer.c
index b027f66f8bd4..2b332991ac6a 100644
--- a/drivers/misc/habanalabs/common/command_buffer.c
+++ b/drivers/misc/habanalabs/common/command_buffer.c
@@ -12,20 +12,18 @@
#include <linux/slab.h>
#include <linux/uaccess.h>
+#define CB_VA_POOL_SIZE (4UL * SZ_1G)
+
static int cb_map_mem(struct hl_ctx *ctx, struct hl_cb *cb)
{
struct hl_device *hdev = ctx->hdev;
struct asic_fixed_properties *prop = &hdev->asic_prop;
- struct hl_vm_va_block *va_block, *tmp;
- dma_addr_t bus_addr;
- u64 virt_addr;
u32 page_size = prop->pmmu.page_size;
- s32 offset;
int rc;
if (!hdev->supports_cb_mapping) {
dev_err_ratelimited(hdev->dev,
- "Cannot map CB because no VA range is allocated for CB mapping\n");
+ "Mapping a CB to the device's MMU is not supported\n");
return -EINVAL;
}
@@ -35,106 +33,45 @@ static int cb_map_mem(struct hl_ctx *ctx, struct hl_cb *cb)
return -EINVAL;
}
- INIT_LIST_HEAD(&cb->va_block_list);
-
- for (bus_addr = cb->bus_address;
- bus_addr < cb->bus_address + cb->size;
- bus_addr += page_size) {
-
- virt_addr = (u64) gen_pool_alloc(ctx->cb_va_pool, page_size);
- if (!virt_addr) {
- dev_err(hdev->dev,
- "Failed to allocate device virtual address for CB\n");
- rc = -ENOMEM;
- goto err_va_pool_free;
- }
+ if (cb->is_mmu_mapped)
+ return 0;
- va_block = kzalloc(sizeof(*va_block), GFP_KERNEL);
- if (!va_block) {
- rc = -ENOMEM;
- gen_pool_free(ctx->cb_va_pool, virt_addr, page_size);
- goto err_va_pool_free;
- }
+ cb->roundup_size = roundup(cb->size, page_size);
- va_block->start = virt_addr;
- va_block->end = virt_addr + page_size - 1;
- va_block->size = page_size;
- list_add_tail(&va_block->node, &cb->va_block_list);
+ cb->virtual_addr = (u64) gen_pool_alloc(ctx->cb_va_pool, cb->roundup_size);
+ if (!cb->virtual_addr) {
+ dev_err(hdev->dev, "Failed to allocate device virtual address for CB\n");
+ return -ENOMEM;
}
- mutex_lock(&ctx->mmu_lock);
-
- bus_addr = cb->bus_address;
- offset = 0;
- list_for_each_entry(va_block, &cb->va_block_list, node) {
- rc = hl_mmu_map_page(ctx, va_block->start, bus_addr,
- va_block->size, list_is_last(&va_block->node,
- &cb->va_block_list));
- if (rc) {
- dev_err(hdev->dev, "Failed to map VA %#llx to CB\n",
- va_block->start);
- goto err_va_umap;
- }
-
- bus_addr += va_block->size;
- offset += va_block->size;
+ mutex_lock(&hdev->mmu_lock);
+ rc = hl_mmu_map_contiguous(ctx, cb->virtual_addr, cb->bus_address, cb->roundup_size);
+ if (rc) {
+ dev_err(hdev->dev, "Failed to map VA %#llx to CB\n", cb->virtual_addr);
+ goto err_va_umap;
}
-
rc = hl_mmu_invalidate_cache(hdev, false, MMU_OP_USERPTR | MMU_OP_SKIP_LOW_CACHE_INV);
-
- mutex_unlock(&ctx->mmu_lock);
+ mutex_unlock(&hdev->mmu_lock);
cb->is_mmu_mapped = true;
-
return rc;
err_va_umap:
- list_for_each_entry(va_block, &cb->va_block_list, node) {
- if (offset <= 0)
- break;
- hl_mmu_unmap_page(ctx, va_block->start, va_block->size,
- offset <= va_block->size);
- offset -= va_block->size;
- }
-
- rc = hl_mmu_invalidate_cache(hdev, true, MMU_OP_USERPTR);
-
- mutex_unlock(&ctx->mmu_lock);
-
-err_va_pool_free:
- list_for_each_entry_safe(va_block, tmp, &cb->va_block_list, node) {
- gen_pool_free(ctx->cb_va_pool, va_block->start, va_block->size);
- list_del(&va_block->node);
- kfree(va_block);
- }
-
+ mutex_unlock(&hdev->mmu_lock);
+ gen_pool_free(ctx->cb_va_pool, cb->virtual_addr, cb->roundup_size);
return rc;
}
static void cb_unmap_mem(struct hl_ctx *ctx, struct hl_cb *cb)
{
struct hl_device *hdev = ctx->hdev;
- struct hl_vm_va_block *va_block, *tmp;
-
- mutex_lock(&ctx->mmu_lock);
-
- list_for_each_entry(va_block, &cb->va_block_list, node)
- if (hl_mmu_unmap_page(ctx, va_block->start, va_block->size,
- list_is_last(&va_block->node,
- &cb->va_block_list)))
- dev_warn_ratelimited(hdev->dev,
- "Failed to unmap CB's va 0x%llx\n",
- va_block->start);
+ mutex_lock(&hdev->mmu_lock);
+ hl_mmu_unmap_contiguous(ctx, cb->virtual_addr, cb->roundup_size);
hl_mmu_invalidate_cache(hdev, true, MMU_OP_USERPTR);
+ mutex_unlock(&hdev->mmu_lock);
- mutex_unlock(&ctx->mmu_lock);
-
- list_for_each_entry_safe(va_block, tmp, &cb->va_block_list, node) {
- gen_pool_free(ctx->cb_va_pool, va_block->start, va_block->size);
- list_del(&va_block->node);
- kfree(va_block);
- }
+ gen_pool_free(ctx->cb_va_pool, cb->virtual_addr, cb->roundup_size);
}
static void cb_fini(struct hl_device *hdev, struct hl_cb *cb)
@@ -376,7 +313,6 @@ int hl_cb_destroy(struct hl_mem_mgr *mmg, u64 cb_handle)
static int hl_cb_info(struct hl_mem_mgr *mmg,
u64 handle, u32 flags, u32 *usage_cnt, u64 *device_va)
{
- struct hl_vm_va_block *va_block;
struct hl_cb *cb;
int rc = 0;
@@ -388,9 +324,8 @@ static int hl_cb_info(struct hl_mem_mgr *mmg,
}
if (flags & HL_CB_FLAGS_GET_DEVICE_VA) {
- va_block = list_first_entry(&cb->va_block_list, struct hl_vm_va_block, node);
- if (va_block) {
- *device_va = va_block->start;
+ if (cb->is_mmu_mapped) {
+ *device_va = cb->virtual_addr;
} else {
dev_err(mmg->dev, "CB is not mapped to the device's MMU\n");
rc = -EINVAL;
@@ -566,16 +501,23 @@ int hl_cb_va_pool_init(struct hl_ctx *ctx)
return -ENOMEM;
}
- rc = gen_pool_add(ctx->cb_va_pool, prop->cb_va_start_addr,
- prop->cb_va_end_addr - prop->cb_va_start_addr, -1);
+ ctx->cb_va_pool_base = hl_reserve_va_block(hdev, ctx, HL_VA_RANGE_TYPE_HOST,
+ CB_VA_POOL_SIZE, HL_MMU_VA_ALIGNMENT_NOT_NEEDED);
+ if (!ctx->cb_va_pool_base) {
+ rc = -ENOMEM;
+ goto err_pool_destroy;
+ }
+ rc = gen_pool_add(ctx->cb_va_pool, ctx->cb_va_pool_base, CB_VA_POOL_SIZE, -1);
if (rc) {
dev_err(hdev->dev,
"Failed to add memory to VA gen pool for CB mapping\n");
- goto err_pool_destroy;
+ goto err_unreserve_va_block;
}
return 0;
+err_unreserve_va_block:
+ hl_unreserve_va_block(hdev, ctx, ctx->cb_va_pool_base, CB_VA_POOL_SIZE);
err_pool_destroy:
gen_pool_destroy(ctx->cb_va_pool);
@@ -590,4 +532,5 @@ void hl_cb_va_pool_fini(struct hl_ctx *ctx)
return;
gen_pool_destroy(ctx->cb_va_pool);
+ hl_unreserve_va_block(hdev, ctx, ctx->cb_va_pool_base, CB_VA_POOL_SIZE);
}
diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c
index 90a4574cbe2d..fa05770865c6 100644
--- a/drivers/misc/habanalabs/common/command_submission.c
+++ b/drivers/misc/habanalabs/common/command_submission.c
@@ -12,7 +12,9 @@
#include <linux/slab.h>
#define HL_CS_FLAGS_TYPE_MASK (HL_CS_FLAGS_SIGNAL | HL_CS_FLAGS_WAIT | \
- HL_CS_FLAGS_COLLECTIVE_WAIT)
+ HL_CS_FLAGS_COLLECTIVE_WAIT | HL_CS_FLAGS_RESERVE_SIGNALS_ONLY | \
+ HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY | HL_CS_FLAGS_ENGINE_CORE_COMMAND)
+
#define MAX_TS_ITER_NUM 10
@@ -824,10 +826,10 @@ static void cs_timedout(struct work_struct *work)
}
/* Save only the first CS timeout parameters */
- rc = atomic_cmpxchg(&hdev->last_error.cs_timeout.write_enable, 1, 0);
+ rc = atomic_cmpxchg(&hdev->captured_err_info.cs_timeout.write_enable, 1, 0);
if (rc) {
- hdev->last_error.cs_timeout.timestamp = ktime_get();
- hdev->last_error.cs_timeout.seq = cs->sequence;
+ hdev->captured_err_info.cs_timeout.timestamp = ktime_get();
+ hdev->captured_err_info.cs_timeout.seq = cs->sequence;
event_mask = device_reset ? (HL_NOTIFIER_EVENT_CS_TIMEOUT |
HL_NOTIFIER_EVENT_DEVICE_RESET) : HL_NOTIFIER_EVENT_CS_TIMEOUT;
@@ -1242,6 +1244,8 @@ static enum hl_cs_type hl_cs_get_cs_type(u32 cs_type_flags)
return CS_RESERVE_SIGNALS;
else if (cs_type_flags & HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY)
return CS_UNRESERVE_SIGNALS;
+ else if (cs_type_flags & HL_CS_FLAGS_ENGINE_CORE_COMMAND)
+ return CS_TYPE_ENGINE_CORE;
else
return CS_TYPE_DEFAULT;
}
@@ -1253,6 +1257,7 @@ static int hl_cs_sanity_checks(struct hl_fpriv *hpriv, union hl_cs_args *args)
u32 cs_type_flags, num_chunks;
enum hl_device_status status;
enum hl_cs_type cs_type;
+ bool is_sync_stream;
if (!hl_device_operational(hdev, &status)) {
return -EBUSY;
@@ -1276,9 +1281,10 @@ static int hl_cs_sanity_checks(struct hl_fpriv *hpriv, union hl_cs_args *args)
cs_type = hl_cs_get_cs_type(cs_type_flags);
num_chunks = args->in.num_chunks_execute;
- if (unlikely((cs_type == CS_TYPE_SIGNAL || cs_type == CS_TYPE_WAIT ||
- cs_type == CS_TYPE_COLLECTIVE_WAIT) &&
- !hdev->supports_sync_stream)) {
+ is_sync_stream = (cs_type == CS_TYPE_SIGNAL || cs_type == CS_TYPE_WAIT ||
+ cs_type == CS_TYPE_COLLECTIVE_WAIT);
+
+ if (unlikely(is_sync_stream && !hdev->supports_sync_stream)) {
dev_err(hdev->dev, "Sync stream CS is not supported\n");
return -EINVAL;
}
@@ -1288,7 +1294,7 @@ static int hl_cs_sanity_checks(struct hl_fpriv *hpriv, union hl_cs_args *args)
dev_err(hdev->dev, "Got execute CS with 0 chunks, context %d\n", ctx->asid);
return -EINVAL;
}
- } else if (num_chunks != 1) {
+ } else if (is_sync_stream && num_chunks != 1) {
dev_err(hdev->dev,
"Sync stream CS mandates one chunk only, context %d\n",
ctx->asid);
@@ -1584,13 +1590,14 @@ static int hl_cs_ctx_switch(struct hl_fpriv *hpriv, union hl_cs_args *args,
struct hl_device *hdev = hpriv->hdev;
struct hl_ctx *ctx = hpriv->ctx;
bool need_soft_reset = false;
- int rc = 0, do_ctx_switch;
+ int rc = 0, do_ctx_switch = 0;
void __user *chunks;
u32 num_chunks, tmp;
u16 sob_count;
int ret;
- do_ctx_switch = atomic_cmpxchg(&ctx->thread_ctx_switch_token, 1, 0);
+ if (hdev->supports_ctx_switch)
+ do_ctx_switch = atomic_cmpxchg(&ctx->thread_ctx_switch_token, 1, 0);
if (do_ctx_switch || (args->in.cs_flags & HL_CS_FLAGS_FORCE_RESTORE)) {
mutex_lock(&hpriv->restore_phase_mutex);
@@ -1661,9 +1668,10 @@ wait_again:
}
}
- ctx->thread_ctx_switch_wait_token = 1;
+ if (hdev->supports_ctx_switch)
+ ctx->thread_ctx_switch_wait_token = 1;
- } else if (!ctx->thread_ctx_switch_wait_token) {
+ } else if (hdev->supports_ctx_switch && !ctx->thread_ctx_switch_wait_token) {
rc = hl_poll_timeout_memory(hdev,
&ctx->thread_ctx_switch_wait_token, tmp, (tmp == 1),
100, jiffies_to_usecs(hdev->timeout_jiffies), false);
@@ -2351,6 +2359,41 @@ out:
return rc;
}
+static int cs_ioctl_engine_cores(struct hl_fpriv *hpriv, u64 engine_cores,
+ u32 num_engine_cores, u32 core_command)
+{
+ int rc;
+ struct hl_device *hdev = hpriv->hdev;
+ void __user *engine_cores_arr;
+ u32 *cores;
+
+ if (!num_engine_cores || num_engine_cores > hdev->asic_prop.num_engine_cores) {
+ dev_err(hdev->dev, "Number of engine cores %d is invalid\n", num_engine_cores);
+ return -EINVAL;
+ }
+
+ if (core_command != HL_ENGINE_CORE_RUN && core_command != HL_ENGINE_CORE_HALT) {
+ dev_err(hdev->dev, "Engine core command is invalid\n");
+ return -EINVAL;
+ }
+
+ engine_cores_arr = (void __user *) (uintptr_t) engine_cores;
+ cores = kmalloc_array(num_engine_cores, sizeof(u32), GFP_KERNEL);
+ if (!cores)
+ return -ENOMEM;
+
+ if (copy_from_user(cores, engine_cores_arr, num_engine_cores * sizeof(u32))) {
+ dev_err(hdev->dev, "Failed to copy core-ids array from user\n");
+ kfree(cores);
+ return -EFAULT;
+ }
+
+ rc = hdev->asic_funcs->set_engine_cores(hdev, cores, num_engine_cores, core_command);
+ kfree(cores);
+
+ return rc;
+}
+
int hl_cs_ioctl(struct hl_fpriv *hpriv, void *data)
{
union hl_cs_args *args = data;
@@ -2403,6 +2446,10 @@ int hl_cs_ioctl(struct hl_fpriv *hpriv, void *data)
rc = cs_ioctl_unreserve_signals(hpriv,
args->in.encaps_sig_handle_id);
break;
+ case CS_TYPE_ENGINE_CORE:
+ rc = cs_ioctl_engine_cores(hpriv, args->in.engine_cores,
+ args->in.num_engine_cores, args->in.core_command);
+ break;
default:
rc = cs_ioctl_default(hpriv, chunks, num_chunks, &cs_seq,
args->in.cs_flags,
@@ -2524,7 +2571,7 @@ static int hl_cs_poll_fences(struct multi_cs_data *mcs_data, struct multi_cs_com
ktime_t max_ktime, first_cs_time;
enum hl_cs_wait_status status;
- memset(fence_ptr, 0, arr_len * sizeof(*fence_ptr));
+ memset(fence_ptr, 0, arr_len * sizeof(struct hl_fence *));
/* get all fences under the same lock */
rc = hl_ctx_get_fences(mcs_data->ctx, seq_arr, fence_ptr, arr_len);
@@ -2826,7 +2873,7 @@ static int hl_multi_cs_wait_ioctl(struct hl_fpriv *hpriv, void *data)
}
/* allocate array for the fences */
- fence_arr = kmalloc_array(seq_arr_len, sizeof(*fence_arr), GFP_KERNEL);
+ fence_arr = kmalloc_array(seq_arr_len, sizeof(struct hl_fence *), GFP_KERNEL);
if (!fence_arr) {
rc = -ENOMEM;
goto free_seq_arr;
diff --git a/drivers/misc/habanalabs/common/debugfs.c b/drivers/misc/habanalabs/common/debugfs.c
index 64439f33a19b..48d3ec8b5c82 100644
--- a/drivers/misc/habanalabs/common/debugfs.c
+++ b/drivers/misc/habanalabs/common/debugfs.c
@@ -291,14 +291,16 @@ static int vm_show(struct seq_file *s, void *data)
if (ctx->asid != HL_KERNEL_ASID_ID &&
!list_empty(&ctx->hw_block_mem_list)) {
seq_puts(s, "\nhw_block mappings:\n\n");
- seq_puts(s, " virtual address size HW block id\n");
- seq_puts(s, "-------------------------------------------\n");
+ seq_puts(s,
+ " virtual address block size mapped size HW block id\n");
+ seq_puts(s,
+ "---------------------------------------------------------------\n");
mutex_lock(&ctx->hw_block_list_lock);
- list_for_each_entry(lnode, &ctx->hw_block_mem_list,
- node) {
+ list_for_each_entry(lnode, &ctx->hw_block_mem_list, node) {
seq_printf(s,
- " 0x%-14lx %-6u %-9u\n",
- lnode->vaddr, lnode->size, lnode->id);
+ " 0x%-14lx %-6u %-6u %-9u\n",
+ lnode->vaddr, lnode->block_size, lnode->mapped_size,
+ lnode->id);
}
mutex_unlock(&ctx->hw_block_list_lock);
}
@@ -591,6 +593,7 @@ static int engines_show(struct seq_file *s, void *data)
struct hl_debugfs_entry *entry = s->private;
struct hl_dbg_device_entry *dev_entry = entry->dev_entry;
struct hl_device *hdev = dev_entry->hdev;
+ struct engines_data eng_data;
if (hdev->reset_info.in_reset) {
dev_warn_ratelimited(hdev->dev,
@@ -598,7 +601,25 @@ static int engines_show(struct seq_file *s, void *data)
return 0;
}
- hdev->asic_funcs->is_device_idle(hdev, NULL, 0, s);
+ eng_data.actual_size = 0;
+ eng_data.allocated_buf_size = HL_ENGINES_DATA_MAX_SIZE;
+ eng_data.buf = vmalloc(eng_data.allocated_buf_size);
+ if (!eng_data.buf)
+ return -ENOMEM;
+
+ hdev->asic_funcs->is_device_idle(hdev, NULL, 0, &eng_data);
+
+ if (eng_data.actual_size > eng_data.allocated_buf_size) {
+ dev_err(hdev->dev,
+ "Engines data size (%d Bytes) is bigger than allocated size (%u Bytes)\n",
+ eng_data.actual_size, eng_data.allocated_buf_size);
+ vfree(eng_data.buf);
+ return -ENOMEM;
+ }
+
+ seq_write(s, eng_data.buf, eng_data.actual_size);
+
+ vfree(eng_data.buf);
return 0;
}
diff --git a/drivers/misc/habanalabs/common/device.c b/drivers/misc/habanalabs/common/device.c
index b30aeb1c657f..233d8b46c831 100644
--- a/drivers/misc/habanalabs/common/device.c
+++ b/drivers/misc/habanalabs/common/device.c
@@ -13,6 +13,8 @@
#include <linux/pci.h>
#include <linux/hwmon.h>
+#include <trace/events/habanalabs.h>
+
#define HL_RESET_DELAY_USEC 10000 /* 10ms */
enum dma_alloc_type {
@@ -26,8 +28,9 @@ enum dma_alloc_type {
/*
* hl_set_dram_bar- sets the bar to allow later access to address
*
- * @hdev: pointer to habanalabs device structure
+ * @hdev: pointer to habanalabs device structure.
* @addr: the address the caller wants to access.
+ * @region: the PCI region.
*
* @return: the old BAR base address on success, U64_MAX for failure.
* The caller should set it back to the old address after use.
@@ -37,58 +40,64 @@ enum dma_alloc_type {
* This function can be called also if the bar doesn't need to be set,
* in that case it just won't change the base.
*/
-static uint64_t hl_set_dram_bar(struct hl_device *hdev, u64 addr)
+static u64 hl_set_dram_bar(struct hl_device *hdev, u64 addr, struct pci_mem_region *region)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
- u64 bar_base_addr;
+ u64 bar_base_addr, old_base;
- bar_base_addr = addr & ~(prop->dram_pci_bar_size - 0x1ull);
+ if (is_power_of_2(prop->dram_pci_bar_size))
+ bar_base_addr = addr & ~(prop->dram_pci_bar_size - 0x1ull);
+ else
+ bar_base_addr = DIV_ROUND_DOWN_ULL(addr, prop->dram_pci_bar_size) *
+ prop->dram_pci_bar_size;
- return hdev->asic_funcs->set_dram_bar_base(hdev, bar_base_addr);
-}
+ old_base = hdev->asic_funcs->set_dram_bar_base(hdev, bar_base_addr);
+ /* in case of success we need to update the new BAR base */
+ if (old_base != U64_MAX)
+ region->region_base = bar_base_addr;
+
+ return old_base;
+}
static int hl_access_sram_dram_region(struct hl_device *hdev, u64 addr, u64 *val,
enum debugfs_access_type acc_type, enum pci_region region_type)
{
struct pci_mem_region *region = &hdev->pci_mem_region[region_type];
+ void __iomem *acc_addr;
u64 old_base = 0, rc;
if (region_type == PCI_REGION_DRAM) {
- old_base = hl_set_dram_bar(hdev, addr);
+ old_base = hl_set_dram_bar(hdev, addr, region);
if (old_base == U64_MAX)
return -EIO;
}
+ acc_addr = hdev->pcie_bar[region->bar_id] + addr - region->region_base +
+ region->offset_in_bar;
switch (acc_type) {
case DEBUGFS_READ8:
- *val = readb(hdev->pcie_bar[region->bar_id] +
- addr - region->region_base + region->offset_in_bar);
+ *val = readb(acc_addr);
break;
case DEBUGFS_WRITE8:
- writeb(*val, hdev->pcie_bar[region->bar_id] +
- addr - region->region_base + region->offset_in_bar);
+ writeb(*val, acc_addr);
break;
case DEBUGFS_READ32:
- *val = readl(hdev->pcie_bar[region->bar_id] +
- addr - region->region_base + region->offset_in_bar);
+ *val = readl(acc_addr);
break;
case DEBUGFS_WRITE32:
- writel(*val, hdev->pcie_bar[region->bar_id] +
- addr - region->region_base + region->offset_in_bar);
+ writel(*val, acc_addr);
break;
case DEBUGFS_READ64:
- *val = readq(hdev->pcie_bar[region->bar_id] +
- addr - region->region_base + region->offset_in_bar);
+ *val = readq(acc_addr);
break;
case DEBUGFS_WRITE64:
- writeq(*val, hdev->pcie_bar[region->bar_id] +
- addr - region->region_base + region->offset_in_bar);
+ writeq(*val, acc_addr);
break;
}
if (region_type == PCI_REGION_DRAM) {
- rc = hl_set_dram_bar(hdev, old_base);
+ rc = hl_set_dram_bar(hdev, old_base, region);
if (rc == U64_MAX)
return -EIO;
}
@@ -97,9 +106,10 @@ static int hl_access_sram_dram_region(struct hl_device *hdev, u64 addr, u64 *val
}
static void *hl_dma_alloc_common(struct hl_device *hdev, size_t size, dma_addr_t *dma_handle,
- gfp_t flag, enum dma_alloc_type alloc_type)
+ gfp_t flag, enum dma_alloc_type alloc_type,
+ const char *caller)
{
- void *ptr;
+ void *ptr = NULL;
switch (alloc_type) {
case DMA_ALLOC_COHERENT:
@@ -113,11 +123,16 @@ static void *hl_dma_alloc_common(struct hl_device *hdev, size_t size, dma_addr_t
break;
}
+ if (trace_habanalabs_dma_alloc_enabled() && !ZERO_OR_NULL_PTR(ptr))
+ trace_habanalabs_dma_alloc(hdev->dev, (u64) (uintptr_t) ptr, *dma_handle, size,
+ caller);
+
return ptr;
}
static void hl_asic_dma_free_common(struct hl_device *hdev, size_t size, void *cpu_addr,
- dma_addr_t dma_handle, enum dma_alloc_type alloc_type)
+ dma_addr_t dma_handle, enum dma_alloc_type alloc_type,
+ const char *caller)
{
switch (alloc_type) {
case DMA_ALLOC_COHERENT:
@@ -130,39 +145,44 @@ static void hl_asic_dma_free_common(struct hl_device *hdev, size_t size, void *c
hdev->asic_funcs->asic_dma_pool_free(hdev, cpu_addr, dma_handle);
break;
}
+
+ trace_habanalabs_dma_free(hdev->dev, (u64) (uintptr_t) cpu_addr, dma_handle, size, caller);
}
-void *hl_asic_dma_alloc_coherent(struct hl_device *hdev, size_t size, dma_addr_t *dma_handle,
- gfp_t flag)
+void *hl_asic_dma_alloc_coherent_caller(struct hl_device *hdev, size_t size, dma_addr_t *dma_handle,
+ gfp_t flag, const char *caller)
{
- return hl_dma_alloc_common(hdev, size, dma_handle, flag, DMA_ALLOC_COHERENT);
+ return hl_dma_alloc_common(hdev, size, dma_handle, flag, DMA_ALLOC_COHERENT, caller);
}
-void hl_asic_dma_free_coherent(struct hl_device *hdev, size_t size, void *cpu_addr,
- dma_addr_t dma_handle)
+void hl_asic_dma_free_coherent_caller(struct hl_device *hdev, size_t size, void *cpu_addr,
+ dma_addr_t dma_handle, const char *caller)
{
- hl_asic_dma_free_common(hdev, size, cpu_addr, dma_handle, DMA_ALLOC_COHERENT);
+ hl_asic_dma_free_common(hdev, size, cpu_addr, dma_handle, DMA_ALLOC_COHERENT, caller);
}
-void *hl_cpu_accessible_dma_pool_alloc(struct hl_device *hdev, size_t size, dma_addr_t *dma_handle)
+void *hl_cpu_accessible_dma_pool_alloc_caller(struct hl_device *hdev, size_t size,
+ dma_addr_t *dma_handle, const char *caller)
{
- return hl_dma_alloc_common(hdev, size, dma_handle, 0, DMA_ALLOC_CPU_ACCESSIBLE);
+ return hl_dma_alloc_common(hdev, size, dma_handle, 0, DMA_ALLOC_CPU_ACCESSIBLE, caller);
}
-void hl_cpu_accessible_dma_pool_free(struct hl_device *hdev, size_t size, void *vaddr)
+void hl_cpu_accessible_dma_pool_free_caller(struct hl_device *hdev, size_t size, void *vaddr,
+ const char *caller)
{
- hl_asic_dma_free_common(hdev, size, vaddr, 0, DMA_ALLOC_CPU_ACCESSIBLE);
+ hl_asic_dma_free_common(hdev, size, vaddr, 0, DMA_ALLOC_CPU_ACCESSIBLE, caller);
}
-void *hl_asic_dma_pool_zalloc(struct hl_device *hdev, size_t size, gfp_t mem_flags,
- dma_addr_t *dma_handle)
+void *hl_asic_dma_pool_zalloc_caller(struct hl_device *hdev, size_t size, gfp_t mem_flags,
+ dma_addr_t *dma_handle, const char *caller)
{
- return hl_dma_alloc_common(hdev, size, dma_handle, mem_flags, DMA_ALLOC_POOL);
+ return hl_dma_alloc_common(hdev, size, dma_handle, mem_flags, DMA_ALLOC_POOL, caller);
}
-void hl_asic_dma_pool_free(struct hl_device *hdev, void *vaddr, dma_addr_t dma_addr)
+void hl_asic_dma_pool_free_caller(struct hl_device *hdev, void *vaddr, dma_addr_t dma_addr,
+ const char *caller)
{
- hl_asic_dma_free_common(hdev, 0, vaddr, dma_addr, DMA_ALLOC_POOL);
+ hl_asic_dma_free_common(hdev, 0, vaddr, dma_addr, DMA_ALLOC_POOL, caller);
}
int hl_dma_map_sgtable(struct hl_device *hdev, struct sg_table *sgt, enum dma_data_direction dir)
@@ -267,6 +287,30 @@ int hl_access_dev_mem(struct hl_device *hdev, enum pci_region region_type,
return 0;
}
+void hl_engine_data_sprintf(struct engines_data *e, const char *fmt, ...)
+{
+ va_list args;
+ int str_size;
+
+ va_start(args, fmt);
+ /* Calculate formatted string length. Assuming each string is null terminated, hence
+ * increment result by 1
+ */
+ str_size = vsnprintf(NULL, 0, fmt, args) + 1;
+ va_end(args);
+
+ if ((e->actual_size + str_size) < e->allocated_buf_size) {
+ va_start(args, fmt);
+ vsnprintf(e->buf + e->actual_size, str_size, fmt, args);
+ va_end(args);
+ }
+
+ /* Need to update the size even when not updating destination buffer to get the exact size
+ * of all input strings
+ */
+ e->actual_size += str_size;
+}
+
enum hl_device_status hl_device_status(struct hl_device *hdev)
{
enum hl_device_status status;
@@ -322,6 +366,8 @@ static void hpriv_release(struct kref *ref)
hdev = hpriv->hdev;
+ hdev->asic_funcs->send_device_activity(hdev, false);
+
put_pid(hpriv->taskpid);
hl_debugfs_remove_file(hpriv);
@@ -673,7 +719,7 @@ static int device_early_init(struct hl_device *hdev)
if (hdev->asic_prop.completion_queues_count) {
hdev->cq_wq = kcalloc(hdev->asic_prop.completion_queues_count,
- sizeof(*hdev->cq_wq),
+ sizeof(struct workqueue_struct *),
GFP_KERNEL);
if (!hdev->cq_wq) {
rc = -ENOMEM;
@@ -1091,7 +1137,9 @@ int hl_device_resume(struct hl_device *hdev)
/* 'in_reset' was set to true during suspend, now we must clear it in order
* for hard reset to be performed
*/
+ spin_lock(&hdev->reset_info.lock);
hdev->reset_info.in_reset = 0;
+ spin_unlock(&hdev->reset_info.lock);
rc = hl_device_reset(hdev, HL_DRV_RESET_HARD);
if (rc) {
@@ -1518,6 +1566,13 @@ kill_processes:
*/
hdev->disabled = false;
+ /* F/W security enabled indication might be updated after hard-reset */
+ if (hard_reset) {
+ rc = hl_fw_read_preboot_status(hdev);
+ if (rc)
+ goto out_err;
+ }
+
rc = hdev->asic_funcs->hw_init(hdev);
if (rc) {
dev_err(hdev->dev, "failed to initialize the H/W after reset\n");
@@ -1556,7 +1611,7 @@ kill_processes:
if (!hdev->asic_prop.fw_security_enabled)
hl_fw_set_max_power(hdev);
} else {
- rc = hdev->asic_funcs->non_hard_reset_late_init(hdev);
+ rc = hdev->asic_funcs->compute_reset_late_init(hdev);
if (rc) {
if (reset_upon_device_release)
dev_err(hdev->dev,
@@ -1704,7 +1759,9 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
char *name;
bool add_cdev_sysfs_on_err = false;
- name = kasprintf(GFP_KERNEL, "hl%d", hdev->id / 2);
+ hdev->cdev_idx = hdev->id / 2;
+
+ name = kasprintf(GFP_KERNEL, "hl%d", hdev->cdev_idx);
if (!name) {
rc = -ENOMEM;
goto out_disabled;
@@ -1719,7 +1776,7 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
if (rc)
goto out_disabled;
- name = kasprintf(GFP_KERNEL, "hl_controlD%d", hdev->id / 2);
+ name = kasprintf(GFP_KERNEL, "hl_controlD%d", hdev->cdev_idx);
if (!name) {
rc = -ENOMEM;
goto free_dev;
@@ -1806,7 +1863,7 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
}
hdev->shadow_cs_queue = kcalloc(hdev->asic_prop.max_pending_cs,
- sizeof(*hdev->shadow_cs_queue), GFP_KERNEL);
+ sizeof(struct hl_cs *), GFP_KERNEL);
if (!hdev->shadow_cs_queue) {
rc = -ENOMEM;
goto cq_fini;
@@ -1997,10 +2054,10 @@ out_disabled:
if (hdev->pdev)
dev_err(&hdev->pdev->dev,
"Failed to initialize hl%d. Device is NOT usable !\n",
- hdev->id / 2);
+ hdev->cdev_idx);
else
pr_err("Failed to initialize hl%d. Device is NOT usable !\n",
- hdev->id / 2);
+ hdev->cdev_idx);
return rc;
}
diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index 608ca67527a5..2de6a9bd564d 100644
--- a/drivers/misc/habanalabs/common/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -15,14 +15,6 @@
#define FW_FILE_MAX_SIZE 0x1400000 /* maximum size of 20MB */
-struct fw_binning_conf {
- u64 tpc_binning;
- u32 dec_binning;
- u32 hbm_binning;
- u32 edma_binning;
- u32 mme_redundancy;
-};
-
static char *extract_fw_ver_from_str(const char *fw_str)
{
char *str, *fw_ver, *whitespace;
@@ -260,7 +252,7 @@ int hl_fw_send_cpu_message(struct hl_device *hdev, u32 hw_queue_id, u32 *msg,
struct cpucp_packet *pkt;
dma_addr_t pkt_dma_addr;
struct hl_bd *sent_bd;
- u32 tmp, expected_ack_val, pi;
+ u32 tmp, expected_ack_val, pi, opcode;
int rc;
pkt = hl_cpu_accessible_dma_pool_alloc(hdev, len, &pkt_dma_addr);
@@ -327,8 +319,35 @@ int hl_fw_send_cpu_message(struct hl_device *hdev, u32 hw_queue_id, u32 *msg,
rc = (tmp & CPUCP_PKT_CTL_RC_MASK) >> CPUCP_PKT_CTL_RC_SHIFT;
if (rc) {
- dev_dbg(hdev->dev, "F/W ERROR %d for CPU packet %d\n",
- rc, (tmp & CPUCP_PKT_CTL_OPCODE_MASK) >> CPUCP_PKT_CTL_OPCODE_SHIFT);
+ opcode = (tmp & CPUCP_PKT_CTL_OPCODE_MASK) >> CPUCP_PKT_CTL_OPCODE_SHIFT;
+
+ if (!prop->supports_advanced_cpucp_rc) {
+ dev_dbg(hdev->dev, "F/W ERROR %d for CPU packet %d\n", rc, opcode);
+ goto scrub_descriptor;
+ }
+
+ switch (rc) {
+ case cpucp_packet_invalid:
+ dev_err(hdev->dev,
+ "CPU packet %d is not supported by F/W\n", opcode);
+ break;
+ case cpucp_packet_fault:
+ dev_err(hdev->dev,
+ "F/W failed processing CPU packet %d\n", opcode);
+ break;
+ case cpucp_packet_invalid_pkt:
+ dev_dbg(hdev->dev,
+ "CPU packet %d is not supported by F/W\n", opcode);
+ break;
+ case cpucp_packet_invalid_params:
+ dev_err(hdev->dev,
+ "F/W reports invalid parameters for CPU packet %d\n", opcode);
+ break;
+
+ default:
+ dev_err(hdev->dev,
+ "Unknown F/W ERROR %d for CPU packet %d\n", rc, opcode);
+ }
/* propagate the return code from the f/w to the callers who want to check it */
if (result)
@@ -340,6 +359,7 @@ int hl_fw_send_cpu_message(struct hl_device *hdev, u32 hw_queue_id, u32 *msg,
*result = le64_to_cpu(pkt->result);
}
+scrub_descriptor:
/* Scrub previous buffer descriptor 'ctl' field which contains the
* previous PI value written during packet submission.
* We must do this or else F/W can read an old value upon queue wraparound.
@@ -462,6 +482,21 @@ void hl_fw_cpu_accessible_dma_pool_free(struct hl_device *hdev, size_t size,
size);
}
+int hl_fw_send_device_activity(struct hl_device *hdev, bool open)
+{
+ struct cpucp_packet pkt;
+ int rc;
+
+ memset(&pkt, 0, sizeof(pkt));
+ pkt.ctl = cpu_to_le32(CPUCP_PACKET_ACTIVE_STATUS_SET << CPUCP_PKT_CTL_OPCODE_SHIFT);
+ pkt.value = cpu_to_le64(open);
+ rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt), 0, NULL);
+ if (rc)
+ dev_err(hdev->dev, "failed to send device activity msg(%u)\n", open);
+
+ return rc;
+}
+
int hl_fw_send_heartbeat(struct hl_device *hdev)
{
struct cpucp_packet hb_pkt;
@@ -581,6 +616,15 @@ static bool fw_report_boot_dev0(struct hl_device *hdev, u32 err_val,
dev_dbg(hdev->dev, "Device status0 %#x\n", sts_val);
/* All warnings should go here in order not to reach the unknown error validation */
+ if (err_val & CPU_BOOT_ERR0_EEPROM_FAIL) {
+ dev_warn(hdev->dev,
+ "Device boot warning - EEPROM failure detected, default settings applied\n");
+ /* This is a warning so we don't want it to disable the
+ * device
+ */
+ err_val &= ~CPU_BOOT_ERR0_EEPROM_FAIL;
+ }
+
if (err_val & CPU_BOOT_ERR0_DRAM_SKIPPED) {
dev_warn(hdev->dev,
"Device boot warning - Skipped DRAM initialization\n");
@@ -1476,6 +1520,8 @@ static void hl_fw_preboot_update_state(struct hl_device *hdev)
*/
prop->hard_reset_done_by_fw = !!(cpu_boot_dev_sts0 & CPU_BOOT_DEV_STS0_FW_HARD_RST_EN);
+ prop->fw_security_enabled = !!(cpu_boot_dev_sts0 & CPU_BOOT_DEV_STS0_SECURITY_EN);
+
dev_dbg(hdev->dev, "Firmware preboot boot device status0 %#x\n",
cpu_boot_dev_sts0);
@@ -1514,7 +1560,7 @@ int hl_fw_read_preboot_status(struct hl_device *hdev)
hdev->asic_funcs->init_firmware_preload_params(hdev);
/*
- * In order to determine boot method (static VS dymanic) we need to
+ * In order to determine boot method (static VS dynamic) we need to
* read the boot caps register
*/
rc = hl_fw_read_preboot_caps(hdev);
@@ -1781,7 +1827,7 @@ int hl_fw_dynamic_send_protocol_cmd(struct hl_device *hdev,
*
* @return the CRC32 result
*
- * NOTE: kernel's CRC32 differ's from standard CRC32 calculation.
+ * NOTE: kernel's CRC32 differs from standard CRC32 calculation.
* in order to be aligned we need to flip the bits of both the input
* initial CRC and kernel's CRC32 result.
* in addition both sides use initial CRC of 0,
@@ -1798,7 +1844,7 @@ static u32 hl_fw_compat_crc32(u8 *data, size_t size)
*
* @hdev: pointer to the habanalabs device structure
* @addr: device address of memory transfer
- * @size: memory transter size
+ * @size: memory transfer size
* @region: PCI memory region
*
* @return 0 on success, otherwise non-zero error code
@@ -1854,50 +1900,36 @@ static int hl_fw_dynamic_validate_descriptor(struct hl_device *hdev,
u64 addr;
int rc;
- if (le32_to_cpu(fw_desc->header.magic) != HL_COMMS_DESC_MAGIC) {
- dev_err(hdev->dev, "Invalid magic for dynamic FW descriptor (%x)\n",
+ if (le32_to_cpu(fw_desc->header.magic) != HL_COMMS_DESC_MAGIC)
+ dev_warn(hdev->dev, "Invalid magic for dynamic FW descriptor (%x)\n",
fw_desc->header.magic);
- return -EIO;
- }
- if (fw_desc->header.version != HL_COMMS_DESC_VER) {
- dev_err(hdev->dev, "Invalid version for dynamic FW descriptor (%x)\n",
+ if (fw_desc->header.version != HL_COMMS_DESC_VER)
+ dev_warn(hdev->dev, "Invalid version for dynamic FW descriptor (%x)\n",
fw_desc->header.version);
- return -EIO;
- }
/*
- * calc CRC32 of data without header.
+ * Calc CRC32 of data without header. use the size of the descriptor
+ * reported by firmware, without calculating it ourself, to allow adding
+ * more fields to the lkd_fw_comms_desc structure.
* note that no alignment/stride address issues here as all structures
- * are 64 bit padded
+ * are 64 bit padded.
*/
- data_size = sizeof(struct lkd_fw_comms_desc) -
- sizeof(struct comms_desc_header);
data_ptr = (u8 *)fw_desc + sizeof(struct comms_desc_header);
-
- if (le16_to_cpu(fw_desc->header.size) != data_size) {
- dev_err(hdev->dev,
- "Invalid descriptor size 0x%x, expected size 0x%zx\n",
- le16_to_cpu(fw_desc->header.size), data_size);
- return -EIO;
- }
+ data_size = le16_to_cpu(fw_desc->header.size);
data_crc32 = hl_fw_compat_crc32(data_ptr, data_size);
-
if (data_crc32 != le32_to_cpu(fw_desc->header.crc32)) {
- dev_err(hdev->dev,
- "CRC32 mismatch for dynamic FW descriptor (%x:%x)\n",
- data_crc32, fw_desc->header.crc32);
+ dev_err(hdev->dev, "CRC32 mismatch for dynamic FW descriptor (%x:%x)\n",
+ data_crc32, fw_desc->header.crc32);
return -EIO;
}
/* find memory region to which to copy the image */
addr = le64_to_cpu(fw_desc->img_addr);
region_id = hl_get_pci_memory_region(hdev, addr);
- if ((region_id != PCI_REGION_SRAM) &&
- ((region_id != PCI_REGION_DRAM))) {
- dev_err(hdev->dev,
- "Invalid region to copy FW image address=%llx\n", addr);
+ if ((region_id != PCI_REGION_SRAM) && ((region_id != PCI_REGION_DRAM))) {
+ dev_err(hdev->dev, "Invalid region to copy FW image address=%llx\n", addr);
return -EIO;
}
@@ -1914,8 +1946,7 @@ static int hl_fw_dynamic_validate_descriptor(struct hl_device *hdev,
fw_loader->dynamic_loader.fw_image_size,
region);
if (rc) {
- dev_err(hdev->dev,
- "invalid mem transfer request for FW image\n");
+ dev_err(hdev->dev, "invalid mem transfer request for FW image\n");
return rc;
}
@@ -2422,18 +2453,6 @@ static int hl_fw_dynamic_send_msg(struct hl_device *hdev,
msg.reset_cause = *(__u8 *) data;
break;
- case HL_COMMS_BINNING_CONF_TYPE:
- {
- struct fw_binning_conf *binning_conf = (struct fw_binning_conf *) data;
-
- msg.tpc_binning_conf = cpu_to_le64(binning_conf->tpc_binning);
- msg.dec_binning_conf = cpu_to_le32(binning_conf->dec_binning);
- msg.hbm_binning_conf = cpu_to_le32(binning_conf->hbm_binning);
- msg.edma_binning_conf = cpu_to_le32(binning_conf->edma_binning);
- msg.mme_redundancy_conf = cpu_to_le32(binning_conf->mme_redundancy);
- break;
- }
-
default:
dev_err(hdev->dev,
"Send COMMS message - invalid message type %u\n",
@@ -2503,13 +2522,6 @@ static int hl_fw_dynamic_init_cpu(struct hl_device *hdev,
*/
dyn_regs = &fw_loader->dynamic_loader.comm_desc.cpu_dyn_regs;
- /* if no preboot loaded indication- wait for preboot */
- if (!(hdev->fw_loader.fw_comp_loaded & FW_TYPE_PREBOOT_CPU)) {
- rc = hl_fw_wait_preboot_ready(hdev);
- if (rc)
- return -EIO;
- }
-
rc = hl_fw_dynamic_send_protocol_cmd(hdev, fw_loader, COMMS_RST_STATE,
0, true,
fw_loader->cpu_timeout);
@@ -2547,7 +2559,7 @@ static int hl_fw_dynamic_init_cpu(struct hl_device *hdev,
/*
* when testing FW load (without Linux) on PLDM we don't want to
* wait until boot fit is active as it may take several hours.
- * instead, we load the bootfit and let it do all initializations in
+ * instead, we load the bootfit and let it do all initialization in
* the background.
*/
if (hdev->pldm && !(hdev->fw_components & FW_TYPE_LINUX))
@@ -2961,3 +2973,49 @@ void hl_fw_set_max_power(struct hl_device *hdev)
if (rc)
dev_err(hdev->dev, "Failed to set max power, error %d\n", rc);
}
+
+static int hl_fw_get_sec_attest_data(struct hl_device *hdev, u32 packet_id, void *data, u32 size,
+ u32 nonce, u32 timeout)
+{
+ struct cpucp_packet pkt = {};
+ dma_addr_t req_dma_addr;
+ void *req_cpu_addr;
+ int rc;
+
+ req_cpu_addr = hl_cpu_accessible_dma_pool_alloc(hdev, size, &req_dma_addr);
+ if (!data) {
+ dev_err(hdev->dev,
+ "Failed to allocate DMA memory for CPU-CP packet %u\n", packet_id);
+ return -ENOMEM;
+ }
+
+ memset(data, 0, size);
+
+ pkt.ctl = cpu_to_le32(packet_id << CPUCP_PKT_CTL_OPCODE_SHIFT);
+ pkt.addr = cpu_to_le64(req_dma_addr);
+ pkt.data_max_size = cpu_to_le32(size);
+ pkt.nonce = cpu_to_le32(nonce);
+
+ rc = hdev->asic_funcs->send_cpu_message(hdev, (u32 *) &pkt, sizeof(pkt),
+ timeout, NULL);
+ if (rc) {
+ dev_err(hdev->dev,
+ "Failed to handle CPU-CP pkt %u, error %d\n", packet_id, rc);
+ goto out;
+ }
+
+ memcpy(data, req_cpu_addr, size);
+
+out:
+ hl_cpu_accessible_dma_pool_free(hdev, size, req_cpu_addr);
+
+ return rc;
+}
+
+int hl_fw_get_sec_attest_info(struct hl_device *hdev, struct cpucp_sec_attest_info *sec_attest_info,
+ u32 nonce)
+{
+ return hl_fw_get_sec_attest_data(hdev, CPUCP_PACKET_SEC_ATTEST_GET, sec_attest_info,
+ sizeof(struct cpucp_sec_attest_info), nonce,
+ HL_CPUCP_SEC_ATTEST_INFO_TINEOUT_USEC);
+}
diff --git a/drivers/misc/habanalabs/common/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h
index d59bba9e55c9..58c95b13be69 100644
--- a/drivers/misc/habanalabs/common/habanalabs.h
+++ b/drivers/misc/habanalabs/common/habanalabs.h
@@ -66,6 +66,7 @@ struct hl_fpriv;
#define HL_CPUCP_INFO_TIMEOUT_USEC 10000000 /* 10s */
#define HL_CPUCP_EEPROM_TIMEOUT_USEC 10000000 /* 10s */
#define HL_CPUCP_MON_DUMP_TIMEOUT_USEC 10000000 /* 10s */
+#define HL_CPUCP_SEC_ATTEST_INFO_TINEOUT_USEC 10000000 /* 10s */
#define HL_FW_STATUS_POLL_INTERVAL_USEC 10000 /* 10ms */
#define HL_FW_COMMS_STATUS_PLDM_POLL_INTERVAL_USEC 1000000 /* 1s */
@@ -94,7 +95,7 @@ struct hl_fpriv;
#define MMU_HASH_TABLE_BITS 7 /* 1 << 7 buckets */
/**
- * enum hl_mmu_page_table_locaion - mmu page table location
+ * enum hl_mmu_page_table_location - mmu page table location
* @MMU_DR_PGT: page-table is located on device DRAM.
* @MMU_HR_PGT: page-table is located on host memory.
* @MMU_NUM_PGT_LOCATIONS: number of page-table locations currently supported.
@@ -143,6 +144,25 @@ enum hl_mmu_enablement {
#define HL_MAX_DCORES 8
+/* DMA alloc/free wrappers */
+#define hl_asic_dma_alloc_coherent(hdev, size, dma_handle, flags) \
+ hl_asic_dma_alloc_coherent_caller(hdev, size, dma_handle, flags, __func__)
+
+#define hl_cpu_accessible_dma_pool_alloc(hdev, size, dma_handle) \
+ hl_cpu_accessible_dma_pool_alloc_caller(hdev, size, dma_handle, __func__)
+
+#define hl_asic_dma_pool_zalloc(hdev, size, mem_flags, dma_handle) \
+ hl_asic_dma_pool_zalloc_caller(hdev, size, mem_flags, dma_handle, __func__)
+
+#define hl_asic_dma_free_coherent(hdev, size, cpu_addr, dma_handle) \
+ hl_asic_dma_free_coherent_caller(hdev, size, cpu_addr, dma_handle, __func__)
+
+#define hl_cpu_accessible_dma_pool_free(hdev, size, vaddr) \
+ hl_cpu_accessible_dma_pool_free_caller(hdev, size, vaddr, __func__)
+
+#define hl_asic_dma_pool_free(hdev, vaddr, dma_addr) \
+ hl_asic_dma_pool_free_caller(hdev, vaddr, dma_addr, __func__)
+
/*
* Reset Flags
*
@@ -208,6 +228,7 @@ enum hl_protection_levels {
* struct iterate_module_ctx - HW module iterator
* @fn: function to apply to each HW module instance
* @data: optional internal data to the function iterator
+ * @rc: return code for optional use of iterator/iterator-caller
*/
struct iterate_module_ctx {
/*
@@ -217,10 +238,12 @@ struct iterate_module_ctx {
* @inst: HW module instance within the block
* @offset: current HW module instance offset from the 1-st HW module instance
* in the 1-st block
- * @data: function specific data
+ * @ctx: the iterator context.
*/
- void (*fn)(struct hl_device *hdev, int block, int inst, u32 offset, void *data);
+ void (*fn)(struct hl_device *hdev, int block, int inst, u32 offset,
+ struct iterate_module_ctx *ctx);
void *data;
+ int rc;
};
struct hl_block_glbl_sec {
@@ -342,7 +365,8 @@ enum hl_cs_type {
CS_TYPE_WAIT,
CS_TYPE_COLLECTIVE_WAIT,
CS_RESERVE_SIGNALS,
- CS_UNRESERVE_SIGNALS
+ CS_UNRESERVE_SIGNALS,
+ CS_TYPE_ENGINE_CORE
};
/*
@@ -544,10 +568,6 @@ struct hl_hints_range {
* @tpc_binning_mask: which TPCs are binned. 0 means usable and 1 means binned.
* @dram_enabled_mask: which DRAMs are enabled.
* @dram_binning_mask: which DRAMs are binned. 0 means usable, 1 means binned.
- * @cb_va_start_addr: virtual start address of command buffers which are mapped
- * to the device's MMU.
- * @cb_va_end_addr: virtual end address of command buffers which are mapped to
- * the device's MMU.
* @dram_hints_align_mask: dram va hint addresses alignment mask which is used
* for hints validity check.
* @cfg_base_address: config space base address.
@@ -614,6 +634,7 @@ struct hl_hints_range {
* which the property supports_user_set_page_size is true
* (i.e. the DRAM supports multiple page sizes), otherwise
* it will shall be equal to dram_page_size.
+ * @num_engine_cores: number of engine cpu cores
* @collective_first_sob: first sync object available for collective use
* @collective_first_mon: first monitor available for collective use
* @sync_stream_first_sob: first sync object available for sync stream use
@@ -658,6 +679,7 @@ struct hl_hints_range {
* @set_max_power_on_device_init: true if need to set max power in F/W on device init.
* @supports_user_set_page_size: true if user can set the allocation page size.
* @dma_mask: the dma mask to be set for this device
+ * @supports_advanced_cpucp_rc: true if new cpucp opcodes are supported.
*/
struct asic_fixed_properties {
struct hw_queue_properties *hw_queues_props;
@@ -689,8 +711,6 @@ struct asic_fixed_properties {
u64 tpc_binning_mask;
u64 dram_enabled_mask;
u64 dram_binning_mask;
- u64 cb_va_start_addr;
- u64 cb_va_end_addr;
u64 dram_hints_align_mask;
u64 cfg_base_address;
u64 mmu_cache_mng_addr;
@@ -734,6 +754,7 @@ struct asic_fixed_properties {
u32 faulty_dram_cluster_map;
u32 xbar_edge_enabled_mask;
u32 device_mem_alloc_default_page_size;
+ u32 num_engine_cores;
u16 collective_first_sob;
u16 collective_first_mon;
u16 sync_stream_first_sob;
@@ -766,6 +787,7 @@ struct asic_fixed_properties {
u8 set_max_power_on_device_init;
u8 supports_user_set_page_size;
u8 dma_mask;
+ u8 supports_advanced_cpucp_rc;
};
/**
@@ -797,7 +819,7 @@ struct hl_fence {
* @lock: spinlock to protect fence.
* @hdev: habanalabs device structure.
* @hw_sob: the H/W SOB used in this signal/wait CS.
- * @encaps_sig_hdl: encaps signals hanlder.
+ * @encaps_sig_hdl: encaps signals handler.
* @cs_seq: command submission sequence number.
* @type: type of the CS - signal/wait.
* @sob_val: the SOB value that is used in this signal/wait CS.
@@ -898,14 +920,14 @@ struct hl_mmap_mem_buf {
* @buf: back pointer to the parent mappable memory buffer
* @debugfs_list: node in debugfs list of command buffers.
* @pool_list: node in pool list of command buffers.
- * @va_block_list: list of virtual addresses blocks of the CB if it is mapped to
- * the device's MMU.
* @kernel_address: Holds the CB's kernel virtual address.
+ * @virtual_addr: Holds the CB's virtual address.
* @bus_address: Holds the CB's DMA address.
* @size: holds the CB's size.
+ * @roundup_size: holds the cb size after roundup to page size.
* @cs_cnt: holds number of CS that this CB participates in.
* @is_pool: true if CB was acquired from the pool, false otherwise.
- * @is_internal: internaly allocated
+ * @is_internal: internally allocated
* @is_mmu_mapped: true if the CB is mapped to the device's MMU.
*/
struct hl_cb {
@@ -914,10 +936,11 @@ struct hl_cb {
struct hl_mmap_mem_buf *buf;
struct list_head debugfs_list;
struct list_head pool_list;
- struct list_head va_block_list;
void *kernel_address;
+ u64 virtual_addr;
dma_addr_t bus_address;
u32 size;
+ u32 roundup_size;
atomic_t cs_cnt;
u8 is_pool;
u8 is_internal;
@@ -1113,7 +1136,7 @@ struct timestamp_reg_info {
* @fence: hl fence object for interrupt completion
* @cq_target_value: CQ target value
* @cq_kernel_addr: CQ kernel address, to be used in the cq interrupt
- * handler for taget value comparison
+ * handler for target value comparison
*/
struct hl_user_pending_interrupt {
struct timestamp_reg_info ts_reg_info;
@@ -1372,6 +1395,18 @@ struct fw_load_mgr {
struct hl_cs;
/**
+ * struct engines_data - asic engines data
+ * @buf: buffer for engines data in ascii
+ * @actual_size: actual size of data that was written by the driver to the allocated buffer
+ * @allocated_buf_size: total size of allocated buffer
+ */
+struct engines_data {
+ char *buf;
+ int actual_size;
+ u32 allocated_buf_size;
+};
+
+/**
* struct hl_asic_funcs - ASIC specific functions that are can be called from
* common code.
* @early_init: sets up early driver state (pre sw_init), doesn't configure H/W.
@@ -1434,11 +1469,9 @@ struct hl_cs;
* @send_heartbeat: send is-alive packet to CPU-CP and verify response.
* @debug_coresight: perform certain actions on Coresight for debugging.
* @is_device_idle: return true if device is idle, false otherwise.
- * @non_hard_reset_late_init: perform certain actions needed after a reset which is not hard-reset
+ * @compute_reset_late_init: perform certain actions needed after a compute reset
* @hw_queues_lock: acquire H/W queues lock.
* @hw_queues_unlock: release H/W queues lock.
- * @kdma_lock: acquire H/W queues lock. Relevant from GRECO ASIC
- * @kdma_unlock: release H/W queues lock. Relevant from GRECO ASIC
* @get_pci_id: retrieve PCI ID.
* @get_eeprom_data: retrieve EEPROM data from F/W.
* @get_monitor_dump: retrieve monitor registers dump from F/W.
@@ -1498,6 +1531,8 @@ struct hl_cs;
* @check_if_razwi_happened: check if there was a razwi due to RR violation.
* @access_dev_mem: access device memory
* @set_dram_bar_base: set the base of the DRAM BAR
+ * @set_engine_cores: set a config command to enigne cores
+ * @send_device_activity: indication to FW about device availability
*/
struct hl_asic_funcs {
int (*early_init)(struct hl_device *hdev);
@@ -1570,13 +1605,11 @@ struct hl_asic_funcs {
int (*mmu_prefetch_cache_range)(struct hl_ctx *ctx, u32 flags, u32 asid, u64 va, u64 size);
int (*send_heartbeat)(struct hl_device *hdev);
int (*debug_coresight)(struct hl_device *hdev, struct hl_ctx *ctx, void *data);
- bool (*is_device_idle)(struct hl_device *hdev, u64 *mask_arr,
- u8 mask_len, struct seq_file *s);
- int (*non_hard_reset_late_init)(struct hl_device *hdev);
+ bool (*is_device_idle)(struct hl_device *hdev, u64 *mask_arr, u8 mask_len,
+ struct engines_data *e);
+ int (*compute_reset_late_init)(struct hl_device *hdev);
void (*hw_queues_lock)(struct hl_device *hdev);
void (*hw_queues_unlock)(struct hl_device *hdev);
- void (*kdma_lock)(struct hl_device *hdev, int dcore_id);
- void (*kdma_unlock)(struct hl_device *hdev, int dcore_id);
u32 (*get_pci_id)(struct hl_device *hdev);
int (*get_eeprom_data)(struct hl_device *hdev, void *data, size_t max_size);
int (*get_monitor_dump)(struct hl_device *hdev, void *data);
@@ -1634,6 +1667,9 @@ struct hl_asic_funcs {
int (*access_dev_mem)(struct hl_device *hdev, enum pci_region region_type,
u64 addr, u64 *val, enum debugfs_access_type acc_type);
u64 (*set_dram_bar_base)(struct hl_device *hdev, u64 addr);
+ int (*set_engine_cores)(struct hl_device *hdev, u32 *core_ids,
+ u32 num_cores, u32 core_command);
+ int (*send_device_activity)(struct hl_device *hdev, bool open);
};
@@ -1727,10 +1763,10 @@ struct hl_cs_outcome {
/**
* struct hl_cs_outcome_store - represents a limited store of completed CS outcomes
- * @outcome_map: index of completed CS searcheable by sequence number
+ * @outcome_map: index of completed CS searchable by sequence number
* @used_list: list of outcome objects currently in use
* @free_list: list of outcome objects currently not in use
- * @nodes_pool: a static pool of preallocated outcome objects
+ * @nodes_pool: a static pool of pre-allocated outcome objects
* @db_lock: any operation on the store must take this lock
*/
struct hl_cs_outcome_store {
@@ -1754,12 +1790,10 @@ struct hl_cs_outcome_store {
* @refcount: reference counter for the context. Context is released only when
* this hits 0l. It is incremented on CS and CS_WAIT.
* @cs_pending: array of hl fence objects representing pending CS.
- * @outcome_store: storage data structure used to remember ouitcomes of completed
+ * @outcome_store: storage data structure used to remember outcomes of completed
* command submissions for a long time after CS id wraparound.
* @va_range: holds available virtual addresses for host and dram mappings.
* @mem_hash_lock: protects the mem_hash.
- * @mmu_lock: protects the MMU page tables. Any change to the PGT, modifying the
- * MMU hash or walking the PGT requires talking this lock.
* @hw_block_list_lock: protects the HW block memory list.
* @debugfs_list: node in debugfs list of contexts.
* @hw_block_mem_list: list of HW block virtual mapped addresses.
@@ -1767,6 +1801,7 @@ struct hl_cs_outcome_store {
* @cb_va_pool: device VA pool for command buffers which are mapped to the
* device's MMU.
* @sig_mgr: encaps signals handle manager.
+ * @cb_va_pool_base: the base address for the device VA pool
* @cs_sequence: sequence number for CS. Value is assigned to a CS and passed
* to user so user could inquire about CS. It is used as
* index to cs_pending array.
@@ -1795,13 +1830,13 @@ struct hl_ctx {
struct hl_cs_outcome_store outcome_store;
struct hl_va_range *va_range[HL_VA_RANGE_TYPE_MAX];
struct mutex mem_hash_lock;
- struct mutex mmu_lock;
struct mutex hw_block_list_lock;
struct list_head debugfs_list;
struct list_head hw_block_mem_list;
struct hl_cs_counters_atomic cs_counters;
struct gen_pool *cb_va_pool;
struct hl_encaps_signals_mgr sig_mgr;
+ u64 cb_va_pool_base;
u64 cs_sequence;
u64 *dram_default_hops;
spinlock_t cs_lock;
@@ -1823,7 +1858,6 @@ struct hl_ctx_mgr {
};
-
/*
* COMMAND SUBMISSIONS
*/
@@ -1889,7 +1923,7 @@ struct hl_userptr {
* @tdr_active: true if TDR was activated for this CS (to prevent
* double TDR activation).
* @aborted: true if CS was aborted due to some device error.
- * @timestamp: true if a timestmap must be captured upon completion.
+ * @timestamp: true if a timestamp must be captured upon completion.
* @staged_last: true if this is the last staged CS and needs completion.
* @staged_first: true if this is the first staged CS and we need to receive
* timeout for this CS.
@@ -2047,14 +2081,16 @@ struct hl_vm_hash_node {
* @node: node to hang on the list in context object.
* @ctx: the context this node belongs to.
* @vaddr: virtual address of the HW block.
- * @size: size of the block.
+ * @block_size: size of the block.
+ * @mapped_size: size of the block which is mapped. May change if partial un-mappings are done.
* @id: HW block id (handle).
*/
struct hl_vm_hw_block_list_node {
struct list_head node;
struct hl_ctx *ctx;
unsigned long vaddr;
- u32 size;
+ u32 block_size;
+ u32 mapped_size;
u32 id;
};
@@ -2214,7 +2250,7 @@ struct hl_info_list {
/**
* struct hl_debugfs_entry - debugfs dentry wrapper.
- * @info_ent: dentry realted ops.
+ * @info_ent: dentry related ops.
* @dev_entry: ASIC specific debugfs manager.
*/
struct hl_debugfs_entry {
@@ -2492,7 +2528,7 @@ void hl_wreg(struct hl_device *hdev, u32 reg, u32 val);
break; \
(val) = __elbi_read; \
} else {\
- (val) = RREG32((u32)addr); \
+ (val) = RREG32((u32)(addr)); \
} \
if (cond) \
break; \
@@ -2503,7 +2539,7 @@ void hl_wreg(struct hl_device *hdev, u32 reg, u32 val);
break; \
(val) = __elbi_read; \
} else {\
- (val) = RREG32((u32)addr); \
+ (val) = RREG32((u32)(addr)); \
} \
break; \
} \
@@ -2919,7 +2955,7 @@ struct razwi_info {
* struct undefined_opcode_info - info about last undefined opcode error
* @timestamp: timestamp of the undefined opcode error
* @cb_addr_streams: CB addresses (per stream) that are currently exists in the PQ
- * entiers. In case all streams array entries are
+ * entries. In case all streams array entries are
* filled with values, it means the execution was in Lower-CP.
* @cq_addr: the address of the current handled command buffer
* @cq_size: the size of the current handled command buffer
@@ -2946,12 +2982,12 @@ struct undefined_opcode_info {
};
/**
- * struct last_error_session_info - info about last session errors occurred.
- * @cs_timeout: CS timeout error last information.
- * @razwi: razwi last information.
+ * struct hl_error_info - holds information collected during an error.
+ * @cs_timeout: CS timeout error information.
+ * @razwi: razwi information.
* @undef_opcode: undefined opcode information
*/
-struct last_error_session_info {
+struct hl_error_info {
struct cs_timeout_info cs_timeout;
struct razwi_info razwi;
struct undefined_opcode_info undef_opcode;
@@ -2960,7 +2996,7 @@ struct last_error_session_info {
/**
* struct hl_reset_info - holds current device reset information.
* @lock: lock to protect critical reset flows.
- * @compute_reset_cnt: number of compte resets since the driver was loaded.
+ * @compute_reset_cnt: number of compute resets since the driver was loaded.
* @hard_reset_cnt: number of hard resets since the driver was loaded.
* @hard_reset_schedule_flags: hard reset is scheduled to after current compute reset,
* here we hold the hard reset flags.
@@ -2971,7 +3007,7 @@ struct last_error_session_info {
* @hard_reset_pending: is there a hard reset work pending.
* @curr_reset_cause: saves an enumerated reset cause when a hard reset is
* triggered, and cleared after it is shared with preboot.
- * @prev_reset_trigger: saves the previous trigger which caused a reset, overidden
+ * @prev_reset_trigger: saves the previous trigger which caused a reset, overridden
* with a new value on next reset
* @reset_trigger_repeated: set if device reset is triggered more than once with
* same cause.
@@ -3041,6 +3077,12 @@ struct hl_reset_info {
* @asid_mutex: protects asid_bitmap.
* @send_cpu_message_lock: enforces only one message in Host <-> CPU-CP queue.
* @debug_lock: protects critical section of setting debug mode for device
+ * @mmu_lock: protects the MMU page tables and invalidation h/w. Although the
+ * page tables are per context, the invalidation h/w is per MMU.
+ * Therefore, we can't allow multiple contexts (we only have two,
+ * user and kernel) to access the invalidation h/w at the same time.
+ * In addition, any change to the PGT, modifying the MMU hash or
+ * walking the PGT requires talking this lock.
* @asic_prop: ASIC specific immutable properties.
* @asic_funcs: ASIC specific functions.
* @asic_specific: ASIC specific information to use only from ASIC files.
@@ -3049,7 +3091,7 @@ struct hl_reset_info {
* @hl_chip_info: ASIC's sensors information.
* @device_status_description: device status description.
* @hl_debugfs: device's debugfs manager.
- * @cb_pool: list of preallocated CBs.
+ * @cb_pool: list of pre allocated CBs.
* @cb_pool_lock: protects the CB pool.
* @internal_cb_pool_virt_addr: internal command buffer pool virtual address.
* @internal_cb_pool_dma_addr: internal command buffer pool dma address.
@@ -3070,7 +3112,7 @@ struct hl_reset_info {
* @state_dump_specs: constants and dictionaries needed to dump system state.
* @multi_cs_completion: array of multi-CS completion.
* @clk_throttling: holds information about current/previous clock throttling events
- * @last_error: holds information about last session in which CS timeout or razwi error occurred.
+ * @captured_err_info: holds information about errors.
* @reset_info: holds current device reset information.
* @stream_master_qid_arr: pointer to array with QIDs of master streams.
* @fw_major_version: major version of current loaded preboot.
@@ -3111,7 +3153,8 @@ struct hl_reset_info {
* @edma_binning: contains mask of edma engines that is received from the f/w which
* indicates which edma engines are binned-out
* @id: device minor.
- * @id_control: minor of the control device
+ * @id_control: minor of the control device.
+ * @cdev_idx: char device index. Used for setting its name.
* @cpu_pci_msb_addr: 50-bit extension bits for the device CPU's 40-bit
* addresses.
* @is_in_dram_scrub: true if dram scrub operation is on going.
@@ -3165,6 +3208,7 @@ struct hl_reset_info {
* Used only for testing.
* @heartbeat: Controls if we want to enable the heartbeat mechanism vs. the f/w, which verifies
* that the f/w is always alive. Used only for testing.
+ * @supports_ctx_switch: true if a ctx switch is required upon first submission.
*/
struct hl_device {
struct pci_dev *pdev;
@@ -3204,6 +3248,7 @@ struct hl_device {
struct mutex asid_mutex;
struct mutex send_cpu_message_lock;
struct mutex debug_lock;
+ struct mutex mmu_lock;
struct asic_fixed_properties asic_prop;
const struct hl_asic_funcs *asic_funcs;
void *asic_specific;
@@ -3242,7 +3287,7 @@ struct hl_device {
struct multi_cs_completion multi_cs_completion[
MULTI_CS_MAX_USER_CTX];
struct hl_clk_throttle clk_throttling;
- struct last_error_session_info last_error;
+ struct hl_error_info captured_err_info;
struct hl_reset_info reset_info;
@@ -3271,6 +3316,7 @@ struct hl_device {
u32 edma_binning;
u16 id;
u16 id_control;
+ u16 cdev_idx;
u16 cpu_pci_msb_addr;
u8 is_in_dram_scrub;
u8 disabled;
@@ -3300,6 +3346,7 @@ struct hl_device {
u8 compute_ctx_in_release;
u8 supports_mmu_prefetch;
u8 reset_upon_device_release;
+ u8 supports_ctx_switch;
/* Parameters for bring-up */
u64 nic_ports_mask;
@@ -3426,15 +3473,18 @@ static inline bool hl_mem_area_crosses_range(u64 address, u32 size,
}
uint64_t hl_set_dram_bar_default(struct hl_device *hdev, u64 addr);
-void *hl_asic_dma_alloc_coherent(struct hl_device *hdev, size_t size, dma_addr_t *dma_handle,
- gfp_t flag);
-void hl_asic_dma_free_coherent(struct hl_device *hdev, size_t size, void *cpu_addr,
- dma_addr_t dma_handle);
-void *hl_cpu_accessible_dma_pool_alloc(struct hl_device *hdev, size_t size, dma_addr_t *dma_handle);
-void hl_cpu_accessible_dma_pool_free(struct hl_device *hdev, size_t size, void *vaddr);
-void *hl_asic_dma_pool_zalloc(struct hl_device *hdev, size_t size, gfp_t mem_flags,
- dma_addr_t *dma_handle);
-void hl_asic_dma_pool_free(struct hl_device *hdev, void *vaddr, dma_addr_t dma_addr);
+void *hl_asic_dma_alloc_coherent_caller(struct hl_device *hdev, size_t size, dma_addr_t *dma_handle,
+ gfp_t flag, const char *caller);
+void hl_asic_dma_free_coherent_caller(struct hl_device *hdev, size_t size, void *cpu_addr,
+ dma_addr_t dma_handle, const char *caller);
+void *hl_cpu_accessible_dma_pool_alloc_caller(struct hl_device *hdev, size_t size,
+ dma_addr_t *dma_handle, const char *caller);
+void hl_cpu_accessible_dma_pool_free_caller(struct hl_device *hdev, size_t size, void *vaddr,
+ const char *caller);
+void *hl_asic_dma_pool_zalloc_caller(struct hl_device *hdev, size_t size, gfp_t mem_flags,
+ dma_addr_t *dma_handle, const char *caller);
+void hl_asic_dma_pool_free_caller(struct hl_device *hdev, void *vaddr, dma_addr_t dma_addr,
+ const char *caller);
int hl_dma_map_sgtable(struct hl_device *hdev, struct sg_table *sgt, enum dma_data_direction dir);
void hl_dma_unmap_sgtable(struct hl_device *hdev, struct sg_table *sgt,
enum dma_data_direction dir);
@@ -3513,6 +3563,7 @@ void hl_sysfs_fini(struct hl_device *hdev);
int hl_hwmon_init(struct hl_device *hdev);
void hl_hwmon_fini(struct hl_device *hdev);
+void hl_hwmon_release_resources(struct hl_device *hdev);
int hl_cb_create(struct hl_device *hdev, struct hl_mem_mgr *mmg,
struct hl_ctx *ctx, u32 cb_size, bool internal_cb,
@@ -3557,7 +3608,7 @@ void hl_hw_block_mem_init(struct hl_ctx *ctx);
void hl_hw_block_mem_fini(struct hl_ctx *ctx);
u64 hl_reserve_va_block(struct hl_device *hdev, struct hl_ctx *ctx,
- enum hl_va_range_type type, u32 size, u32 alignment);
+ enum hl_va_range_type type, u64 size, u32 alignment);
int hl_unreserve_va_block(struct hl_device *hdev, struct hl_ctx *ctx,
u64 start_addr, u64 size);
int hl_pin_host_memory(struct hl_device *hdev, u64 addr, u64 size,
@@ -3674,6 +3725,7 @@ int hl_fw_dram_replaced_row_get(struct hl_device *hdev,
struct cpucp_hbm_row_info *info);
int hl_fw_dram_pending_row_get(struct hl_device *hdev, u32 *pend_rows_num);
int hl_fw_cpucp_engine_core_asid_set(struct hl_device *hdev, u32 asid);
+int hl_fw_send_device_activity(struct hl_device *hdev, bool open);
int hl_pci_bars_map(struct hl_device *hdev, const char * const name[3],
bool is_wc[3]);
int hl_pci_elbi_read(struct hl_device *hdev, u64 addr, u32 *data);
@@ -3697,6 +3749,8 @@ int hl_get_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr, long *va
void hl_set_pwm_info(struct hl_device *hdev, int sensor_index, u32 attr, long value);
long hl_fw_get_max_power(struct hl_device *hdev);
void hl_fw_set_max_power(struct hl_device *hdev);
+int hl_fw_get_sec_attest_info(struct hl_device *hdev, struct cpucp_sec_attest_info *sec_attest_info,
+ u32 nonce);
int hl_set_voltage(struct hl_device *hdev, int sensor_index, u32 attr, long value);
int hl_set_current(struct hl_device *hdev, int sensor_index, u32 attr, long value);
int hl_set_power(struct hl_device *hdev, int sensor_index, u32 attr, long value);
@@ -3743,6 +3797,7 @@ struct hl_mmap_mem_buf *
hl_mmap_mem_buf_alloc(struct hl_mem_mgr *mmg,
struct hl_mmap_mem_buf_behavior *behavior, gfp_t gfp,
void *args);
+__printf(2, 3) void hl_engine_data_sprintf(struct engines_data *e, const char *fmt, ...);
#ifdef CONFIG_DEBUG_FS
diff --git a/drivers/misc/habanalabs/common/habanalabs_drv.c b/drivers/misc/habanalabs/common/habanalabs_drv.c
index f733ead605e7..112632afe7d5 100644
--- a/drivers/misc/habanalabs/common/habanalabs_drv.c
+++ b/drivers/misc/habanalabs/common/habanalabs_drv.c
@@ -14,6 +14,9 @@
#include <linux/aer.h>
#include <linux/module.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/habanalabs.h>
+
#define HL_DRIVER_AUTHOR "HabanaLabs Kernel Driver Team"
#define HL_DRIVER_DESC "Driver for HabanaLabs's AI Accelerators"
@@ -27,7 +30,10 @@ static struct class *hl_class;
static DEFINE_IDR(hl_devs_idr);
static DEFINE_MUTEX(hl_devs_idr_lock);
-static int timeout_locked = 30;
+#define HL_DEFAULT_TIMEOUT_LOCKED 30 /* 30 seconds */
+#define GAUDI_DEFAULT_TIMEOUT_LOCKED 600 /* 10 minutes */
+
+static int timeout_locked = HL_DEFAULT_TIMEOUT_LOCKED;
static int reset_on_lockup = 1;
static int memory_scrub;
static ulong boot_error_status_mask = ULONG_MAX;
@@ -55,14 +61,12 @@ MODULE_PARM_DESC(boot_error_status_mask,
#define PCI_IDS_GAUDI_SEC 0x1010
#define PCI_IDS_GAUDI2 0x1020
-#define PCI_IDS_GAUDI2_SEC 0x1030
static const struct pci_device_id ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GOYA), },
{ PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GAUDI), },
{ PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GAUDI_SEC), },
{ PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GAUDI2), },
- { PCI_DEVICE(PCI_VENDOR_ID_HABANALABS, PCI_IDS_GAUDI2_SEC), },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, ids);
@@ -92,9 +96,6 @@ static enum hl_asic_type get_asic_type(u16 device)
case PCI_IDS_GAUDI2:
asic_type = ASIC_GAUDI2;
break;
- case PCI_IDS_GAUDI2_SEC:
- asic_type = ASIC_GAUDI2_SEC;
- break;
default:
asic_type = ASIC_INVALID;
break;
@@ -107,7 +108,6 @@ static bool is_asic_secured(enum hl_asic_type asic_type)
{
switch (asic_type) {
case ASIC_GAUDI_SEC:
- case ASIC_GAUDI2_SEC:
return true;
default:
return false;
@@ -161,7 +161,7 @@ int hl_device_open(struct inode *inode, struct file *filp)
mutex_lock(&hdev->fpriv_list_lock);
if (!hl_device_operational(hdev, &status)) {
- dev_err_ratelimited(hdev->dev,
+ dev_dbg_ratelimited(hdev->dev,
"Can't open %s because it is %s\n",
dev_name(hdev->dev), hdev->status[status]);
@@ -207,11 +207,13 @@ int hl_device_open(struct inode *inode, struct file *filp)
list_add(&hpriv->dev_node, &hdev->fpriv_list);
mutex_unlock(&hdev->fpriv_list_lock);
+ hdev->asic_funcs->send_device_activity(hdev, true);
+
hl_debugfs_add_file(hpriv);
- atomic_set(&hdev->last_error.cs_timeout.write_enable, 1);
- atomic_set(&hdev->last_error.razwi.write_enable, 1);
- hdev->last_error.undef_opcode.write_enable = true;
+ atomic_set(&hdev->captured_err_info.cs_timeout.write_enable, 1);
+ atomic_set(&hdev->captured_err_info.razwi.write_enable, 1);
+ hdev->captured_err_info.undef_opcode.write_enable = true;
hdev->open_counter++;
hdev->last_successful_open_jif = jiffies;
@@ -269,7 +271,7 @@ int hl_device_open_ctrl(struct inode *inode, struct file *filp)
mutex_lock(&hdev->fpriv_ctrl_list_lock);
if (!hl_device_operational(hdev, NULL)) {
- dev_err_ratelimited(hdev->dev_ctrl,
+ dev_dbg_ratelimited(hdev->dev_ctrl,
"Can't open %s because it is disabled or in reset\n",
dev_name(hdev->dev_ctrl));
rc = -EPERM;
@@ -314,12 +316,22 @@ static void copy_kernel_module_params_to_device(struct hl_device *hdev)
hdev->boot_error_status_mask = boot_error_status_mask;
}
-static void fixup_device_params_per_asic(struct hl_device *hdev)
+static void fixup_device_params_per_asic(struct hl_device *hdev, int timeout)
{
switch (hdev->asic_type) {
- case ASIC_GOYA:
case ASIC_GAUDI:
case ASIC_GAUDI_SEC:
+ /* If user didn't request a different timeout than the default one, we have
+ * a different default timeout for Gaudi
+ */
+ if (timeout == HL_DEFAULT_TIMEOUT_LOCKED)
+ hdev->timeout_jiffies = msecs_to_jiffies(GAUDI_DEFAULT_TIMEOUT_LOCKED *
+ MSEC_PER_SEC);
+
+ hdev->reset_upon_device_release = 0;
+ break;
+
+ case ASIC_GOYA:
hdev->reset_upon_device_release = 0;
break;
@@ -339,7 +351,7 @@ static int fixup_device_params(struct hl_device *hdev)
hdev->fw_comms_poll_interval_usec = HL_FW_STATUS_POLL_INTERVAL_USEC;
if (tmp_timeout)
- hdev->timeout_jiffies = msecs_to_jiffies(tmp_timeout * 1000);
+ hdev->timeout_jiffies = msecs_to_jiffies(tmp_timeout * MSEC_PER_SEC);
else
hdev->timeout_jiffies = MAX_SCHEDULE_TIMEOUT;
@@ -360,7 +372,7 @@ static int fixup_device_params(struct hl_device *hdev)
if (!hdev->cpu_queues_enable)
hdev->heartbeat = 0;
- fixup_device_params_per_asic(hdev);
+ fixup_device_params_per_asic(hdev, tmp_timeout);
return 0;
}
diff --git a/drivers/misc/habanalabs/common/habanalabs_ioctl.c b/drivers/misc/habanalabs/common/habanalabs_ioctl.c
index 6a30bd98ab5e..43afe40966e5 100644
--- a/drivers/misc/habanalabs/common/habanalabs_ioctl.c
+++ b/drivers/misc/habanalabs/common/habanalabs_ioctl.c
@@ -14,6 +14,7 @@
#include <linux/fs.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
+#include <linux/vmalloc.h>
static u32 hl_debug_struct_size[HL_DEBUG_OP_TIMESTAMP + 1] = {
[HL_DEBUG_OP_ETR] = sizeof(struct hl_debug_params_etr),
@@ -103,6 +104,7 @@ static int hw_ip_info(struct hl_device *hdev, struct hl_info_args *args)
hw_ip.edma_enabled_mask = prop->edma_enabled_mask;
hw_ip.server_type = prop->server_type;
+ hw_ip.security_enabled = prop->fw_security_enabled;
return copy_to_user(out, &hw_ip,
min((size_t) size, sizeof(hw_ip))) ? -EFAULT : 0;
@@ -591,8 +593,8 @@ static int cs_timeout_info(struct hl_fpriv *hpriv, struct hl_info_args *args)
if ((!max_size) || (!out))
return -EINVAL;
- info.seq = hdev->last_error.cs_timeout.seq;
- info.timestamp = ktime_to_ns(hdev->last_error.cs_timeout.timestamp);
+ info.seq = hdev->captured_err_info.cs_timeout.seq;
+ info.timestamp = ktime_to_ns(hdev->captured_err_info.cs_timeout.timestamp);
return copy_to_user(out, &info, min_t(size_t, max_size, sizeof(info))) ? -EFAULT : 0;
}
@@ -607,12 +609,12 @@ static int razwi_info(struct hl_fpriv *hpriv, struct hl_info_args *args)
if ((!max_size) || (!out))
return -EINVAL;
- info.timestamp = ktime_to_ns(hdev->last_error.razwi.timestamp);
- info.addr = hdev->last_error.razwi.addr;
- info.engine_id_1 = hdev->last_error.razwi.engine_id_1;
- info.engine_id_2 = hdev->last_error.razwi.engine_id_2;
- info.no_engine_id = hdev->last_error.razwi.non_engine_initiator;
- info.error_type = hdev->last_error.razwi.type;
+ info.timestamp = ktime_to_ns(hdev->captured_err_info.razwi.timestamp);
+ info.addr = hdev->captured_err_info.razwi.addr;
+ info.engine_id_1 = hdev->captured_err_info.razwi.engine_id_1;
+ info.engine_id_2 = hdev->captured_err_info.razwi.engine_id_2;
+ info.no_engine_id = hdev->captured_err_info.razwi.non_engine_initiator;
+ info.error_type = hdev->captured_err_info.razwi.type;
return copy_to_user(out, &info, min_t(size_t, max_size, sizeof(info))) ? -EFAULT : 0;
}
@@ -627,13 +629,13 @@ static int undefined_opcode_info(struct hl_fpriv *hpriv, struct hl_info_args *ar
if ((!max_size) || (!out))
return -EINVAL;
- info.timestamp = ktime_to_ns(hdev->last_error.undef_opcode.timestamp);
- info.engine_id = hdev->last_error.undef_opcode.engine_id;
- info.cq_addr = hdev->last_error.undef_opcode.cq_addr;
- info.cq_size = hdev->last_error.undef_opcode.cq_size;
- info.stream_id = hdev->last_error.undef_opcode.stream_id;
- info.cb_addr_streams_len = hdev->last_error.undef_opcode.cb_addr_streams_len;
- memcpy(info.cb_addr_streams, hdev->last_error.undef_opcode.cb_addr_streams,
+ info.timestamp = ktime_to_ns(hdev->captured_err_info.undef_opcode.timestamp);
+ info.engine_id = hdev->captured_err_info.undef_opcode.engine_id;
+ info.cq_addr = hdev->captured_err_info.undef_opcode.cq_addr;
+ info.cq_size = hdev->captured_err_info.undef_opcode.cq_size;
+ info.stream_id = hdev->captured_err_info.undef_opcode.stream_id;
+ info.cb_addr_streams_len = hdev->captured_err_info.undef_opcode.cb_addr_streams_len;
+ memcpy(info.cb_addr_streams, hdev->captured_err_info.undef_opcode.cb_addr_streams,
sizeof(info.cb_addr_streams));
return copy_to_user(out, &info, min_t(size_t, max_size, sizeof(info))) ? -EFAULT : 0;
@@ -660,6 +662,55 @@ static int dev_mem_alloc_page_sizes_info(struct hl_fpriv *hpriv, struct hl_info_
return copy_to_user(out, &info, min_t(size_t, max_size, sizeof(info))) ? -EFAULT : 0;
}
+static int sec_attest_info(struct hl_fpriv *hpriv, struct hl_info_args *args)
+{
+ void __user *out = (void __user *) (uintptr_t) args->return_pointer;
+ struct cpucp_sec_attest_info *sec_attest_info;
+ struct hl_info_sec_attest *info;
+ u32 max_size = args->return_size;
+ int rc;
+
+ if ((!max_size) || (!out))
+ return -EINVAL;
+
+ sec_attest_info = kmalloc(sizeof(*sec_attest_info), GFP_KERNEL);
+ if (!sec_attest_info)
+ return -ENOMEM;
+
+ info = kmalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ rc = -ENOMEM;
+ goto free_sec_attest_info;
+ }
+
+ rc = hl_fw_get_sec_attest_info(hpriv->hdev, sec_attest_info, args->sec_attest_nonce);
+ if (rc)
+ goto free_info;
+
+ info->nonce = le32_to_cpu(sec_attest_info->nonce);
+ info->pcr_quote_len = le16_to_cpu(sec_attest_info->pcr_quote_len);
+ info->pub_data_len = le16_to_cpu(sec_attest_info->pub_data_len);
+ info->certificate_len = le16_to_cpu(sec_attest_info->certificate_len);
+ info->pcr_num_reg = sec_attest_info->pcr_num_reg;
+ info->pcr_reg_len = sec_attest_info->pcr_reg_len;
+ info->quote_sig_len = sec_attest_info->quote_sig_len;
+ memcpy(&info->pcr_data, &sec_attest_info->pcr_data, sizeof(info->pcr_data));
+ memcpy(&info->pcr_quote, &sec_attest_info->pcr_quote, sizeof(info->pcr_quote));
+ memcpy(&info->public_data, &sec_attest_info->public_data, sizeof(info->public_data));
+ memcpy(&info->certificate, &sec_attest_info->certificate, sizeof(info->certificate));
+ memcpy(&info->quote_sig, &sec_attest_info->quote_sig, sizeof(info->quote_sig));
+
+ rc = copy_to_user(out, info,
+ min_t(size_t, max_size, sizeof(*info))) ? -EFAULT : 0;
+
+free_info:
+ kfree(info);
+free_sec_attest_info:
+ kfree(sec_attest_info);
+
+ return rc;
+}
+
static int eventfd_register(struct hl_fpriv *hpriv, struct hl_info_args *args)
{
int rc;
@@ -697,6 +748,42 @@ static int eventfd_unregister(struct hl_fpriv *hpriv, struct hl_info_args *args)
return 0;
}
+static int engine_status_info(struct hl_fpriv *hpriv, struct hl_info_args *args)
+{
+ void __user *out = (void __user *) (uintptr_t) args->return_pointer;
+ u32 status_buf_size = args->return_size;
+ struct hl_device *hdev = hpriv->hdev;
+ struct engines_data eng_data;
+ int rc;
+
+ if ((status_buf_size < SZ_1K) || (status_buf_size > HL_ENGINES_DATA_MAX_SIZE) || (!out))
+ return -EINVAL;
+
+ eng_data.actual_size = 0;
+ eng_data.allocated_buf_size = status_buf_size;
+ eng_data.buf = vmalloc(status_buf_size);
+ if (!eng_data.buf)
+ return -ENOMEM;
+
+ hdev->asic_funcs->is_device_idle(hdev, NULL, 0, &eng_data);
+
+ if (eng_data.actual_size > eng_data.allocated_buf_size) {
+ dev_err(hdev->dev,
+ "Engines data size (%d Bytes) is bigger than allocated size (%u Bytes)\n",
+ eng_data.actual_size, status_buf_size);
+ vfree(eng_data.buf);
+ return -ENOMEM;
+ }
+
+ args->user_buffer_actual_size = eng_data.actual_size;
+ rc = copy_to_user(out, eng_data.buf, min_t(size_t, status_buf_size, eng_data.actual_size)) ?
+ -EFAULT : 0;
+
+ vfree(eng_data.buf);
+
+ return rc;
+}
+
static int _hl_info_ioctl(struct hl_fpriv *hpriv, void *data,
struct device *dev)
{
@@ -806,12 +893,18 @@ static int _hl_info_ioctl(struct hl_fpriv *hpriv, void *data,
case HL_INFO_DRAM_PENDING_ROWS:
return dram_pending_rows_info(hpriv, args);
+ case HL_INFO_SECURED_ATTESTATION:
+ return sec_attest_info(hpriv, args);
+
case HL_INFO_REGISTER_EVENTFD:
return eventfd_register(hpriv, args);
case HL_INFO_UNREGISTER_EVENTFD:
return eventfd_unregister(hpriv, args);
+ case HL_INFO_ENGINE_STATUS:
+ return engine_status_info(hpriv, args);
+
default:
dev_err(dev, "Invalid request %d\n", args->op);
rc = -EINVAL;
diff --git a/drivers/misc/habanalabs/common/hw_queue.c b/drivers/misc/habanalabs/common/hw_queue.c
index 3f15ab9d827f..d0087c0ec48c 100644
--- a/drivers/misc/habanalabs/common/hw_queue.c
+++ b/drivers/misc/habanalabs/common/hw_queue.c
@@ -826,9 +826,7 @@ static int ext_and_cpu_queue_init(struct hl_device *hdev, struct hl_hw_queue *q,
q->kernel_address = p;
- q->shadow_queue = kmalloc_array(HL_QUEUE_LENGTH,
- sizeof(*q->shadow_queue),
- GFP_KERNEL);
+ q->shadow_queue = kmalloc_array(HL_QUEUE_LENGTH, sizeof(struct hl_cs_job *), GFP_KERNEL);
if (!q->shadow_queue) {
dev_err(hdev->dev,
"Failed to allocate shadow queue for H/W queue %d\n",
diff --git a/drivers/misc/habanalabs/common/hwmon.c b/drivers/misc/habanalabs/common/hwmon.c
index 57f5d2c48330..55eb0203817f 100644
--- a/drivers/misc/habanalabs/common/hwmon.c
+++ b/drivers/misc/habanalabs/common/hwmon.c
@@ -194,7 +194,8 @@ int hl_build_hwmon_channel_info(struct hl_device *hdev, struct cpucp_sensor *sen
curr_arr[sensors_by_type_next_index[type]++] = flags;
}
- channels_info = kcalloc(num_active_sensor_types + 1, sizeof(*channels_info), GFP_KERNEL);
+ channels_info = kcalloc(num_active_sensor_types + 1, sizeof(struct hwmon_channel_info *),
+ GFP_KERNEL);
if (!channels_info) {
rc = -ENOMEM;
goto channels_info_array_err;
@@ -910,3 +911,24 @@ void hl_hwmon_fini(struct hl_device *hdev)
hwmon_device_unregister(hdev->hwmon_dev);
}
+
+void hl_hwmon_release_resources(struct hl_device *hdev)
+{
+ const struct hwmon_channel_info **channel_info_arr;
+ int i = 0;
+
+ if (!hdev->hl_chip_info->info)
+ return;
+
+ channel_info_arr = hdev->hl_chip_info->info;
+
+ while (channel_info_arr[i]) {
+ kfree(channel_info_arr[i]->config);
+ kfree(channel_info_arr[i]);
+ i++;
+ }
+
+ kfree(channel_info_arr);
+
+ hdev->hl_chip_info->info = NULL;
+}
diff --git a/drivers/misc/habanalabs/common/memory.c b/drivers/misc/habanalabs/common/memory.c
index 61bc1bfe984a..ef28f3b37b93 100644
--- a/drivers/misc/habanalabs/common/memory.c
+++ b/drivers/misc/habanalabs/common/memory.c
@@ -457,7 +457,7 @@ static void merge_va_blocks_locked(struct hl_device *hdev,
prev = list_prev_entry(va_block, node);
if (&prev->node != va_list && prev->end + 1 == va_block->start) {
prev->end = va_block->end;
- prev->size = prev->end - prev->start;
+ prev->size = prev->end - prev->start + 1;
list_del(&va_block->node);
kfree(va_block);
va_block = prev;
@@ -466,7 +466,7 @@ static void merge_va_blocks_locked(struct hl_device *hdev,
next = list_next_entry(va_block, node);
if (&next->node != va_list && va_block->end + 1 == next->start) {
next->start = va_block->start;
- next->size = next->end - next->start;
+ next->size = next->end - next->start + 1;
list_del(&va_block->node);
kfree(va_block);
}
@@ -755,7 +755,7 @@ out:
* - Return the start address of the virtual block.
*/
u64 hl_reserve_va_block(struct hl_device *hdev, struct hl_ctx *ctx,
- enum hl_va_range_type type, u32 size, u32 alignment)
+ enum hl_va_range_type type, u64 size, u32 alignment)
{
return get_va_block(hdev, ctx->va_range[type], size, 0,
max(alignment, ctx->va_range[type]->page_size),
@@ -1210,18 +1210,18 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args, u64 *device
goto va_block_err;
}
- mutex_lock(&ctx->mmu_lock);
+ mutex_lock(&hdev->mmu_lock);
rc = map_phys_pg_pack(ctx, ret_vaddr, phys_pg_pack);
if (rc) {
dev_err(hdev->dev, "mapping page pack failed for handle %u\n", handle);
- mutex_unlock(&ctx->mmu_lock);
+ mutex_unlock(&hdev->mmu_lock);
goto map_err;
}
rc = hl_mmu_invalidate_cache_range(hdev, false, *vm_type | MMU_OP_SKIP_LOW_CACHE_INV,
ctx->asid, ret_vaddr, phys_pg_pack->total_size);
- mutex_unlock(&ctx->mmu_lock);
+ mutex_unlock(&hdev->mmu_lock);
if (rc)
goto map_err;
@@ -1362,7 +1362,7 @@ static int unmap_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
else
vaddr &= ~(((u64) phys_pg_pack->page_size) - 1);
- mutex_lock(&ctx->mmu_lock);
+ mutex_lock(&hdev->mmu_lock);
unmap_phys_pg_pack(ctx, vaddr, phys_pg_pack);
@@ -1375,7 +1375,7 @@ static int unmap_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
rc = hl_mmu_invalidate_cache_range(hdev, true, *vm_type, ctx->asid, vaddr,
phys_pg_pack->total_size);
- mutex_unlock(&ctx->mmu_lock);
+ mutex_unlock(&hdev->mmu_lock);
/*
* If the context is closing we don't need to check for the MMU cache
@@ -1418,18 +1418,23 @@ vm_type_err:
return rc;
}
-static int map_block(struct hl_device *hdev, u64 address, u64 *handle,
- u32 *size)
+static int map_block(struct hl_device *hdev, u64 address, u64 *handle, u32 *size)
{
- u32 block_id = 0;
+ u32 block_id;
int rc;
+ *handle = 0;
+ if (size)
+ *size = 0;
+
rc = hdev->asic_funcs->get_hw_block_id(hdev, address, size, &block_id);
+ if (rc)
+ return rc;
*handle = block_id | HL_MMAP_TYPE_BLOCK;
*handle <<= PAGE_SHIFT;
- return rc;
+ return 0;
}
static void hw_block_vm_close(struct vm_area_struct *vma)
@@ -1437,6 +1442,13 @@ static void hw_block_vm_close(struct vm_area_struct *vma)
struct hl_vm_hw_block_list_node *lnode =
(struct hl_vm_hw_block_list_node *) vma->vm_private_data;
struct hl_ctx *ctx = lnode->ctx;
+ long new_mmap_size;
+
+ new_mmap_size = lnode->mapped_size - (vma->vm_end - vma->vm_start);
+ if (new_mmap_size > 0) {
+ lnode->mapped_size = new_mmap_size;
+ return;
+ }
mutex_lock(&ctx->hw_block_list_lock);
list_del(&lnode->node);
@@ -1487,23 +1499,23 @@ int hl_hw_block_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma)
if (!lnode)
return -ENOMEM;
- vma->vm_ops = &hw_block_vm_ops;
- vma->vm_private_data = lnode;
-
- hl_ctx_get(ctx);
-
rc = hdev->asic_funcs->hw_block_mmap(hdev, vma, block_id, block_size);
if (rc) {
- hl_ctx_put(ctx);
kfree(lnode);
return rc;
}
+ hl_ctx_get(ctx);
+
lnode->ctx = ctx;
lnode->vaddr = vma->vm_start;
- lnode->size = block_size;
+ lnode->block_size = block_size;
+ lnode->mapped_size = lnode->block_size;
lnode->id = block_id;
+ vma->vm_private_data = lnode;
+ vma->vm_ops = &hw_block_vm_ops;
+
mutex_lock(&ctx->hw_block_list_lock);
list_add_tail(&lnode->node, &ctx->hw_block_mem_list);
mutex_unlock(&ctx->hw_block_list_lock);
@@ -2296,8 +2308,7 @@ static int get_user_memory(struct hl_device *hdev, u64 addr, u64 size,
return -EFAULT;
}
- userptr->pages = kvmalloc_array(npages, sizeof(*userptr->pages),
- GFP_KERNEL);
+ userptr->pages = kvmalloc_array(npages, sizeof(struct page *), GFP_KERNEL);
if (!userptr->pages)
return -ENOMEM;
@@ -2759,13 +2770,13 @@ void hl_vm_ctx_fini(struct hl_ctx *ctx)
unmap_device_va(ctx, &args, true);
}
- mutex_lock(&ctx->mmu_lock);
+ mutex_lock(&hdev->mmu_lock);
/* invalidate the cache once after the unmapping loop */
hl_mmu_invalidate_cache(hdev, true, MMU_OP_USERPTR);
hl_mmu_invalidate_cache(hdev, true, MMU_OP_PHYS_PACK);
- mutex_unlock(&ctx->mmu_lock);
+ mutex_unlock(&hdev->mmu_lock);
INIT_LIST_HEAD(&free_list);
diff --git a/drivers/misc/habanalabs/common/memory_mgr.c b/drivers/misc/habanalabs/common/memory_mgr.c
index 56df962d2f3c..1936d653699e 100644
--- a/drivers/misc/habanalabs/common/memory_mgr.c
+++ b/drivers/misc/habanalabs/common/memory_mgr.c
@@ -11,7 +11,7 @@
* hl_mmap_mem_buf_get - increase the buffer refcount and return a pointer to
* the buffer descriptor.
*
- * @mmg: parent unifed memory manager
+ * @mmg: parent unified memory manager
* @handle: requested buffer handle
*
* Find the buffer in the store and return a pointer to its descriptor.
@@ -104,7 +104,7 @@ int hl_mmap_mem_buf_put(struct hl_mmap_mem_buf *buf)
* hl_mmap_mem_buf_put_handle - decrease the reference to the buffer with the
* given handle.
*
- * @mmg: parent unifed memory manager
+ * @mmg: parent unified memory manager
* @handle: requested buffer handle
*
* Decrease the reference to the buffer, and release it if it was the last one.
@@ -137,7 +137,7 @@ int hl_mmap_mem_buf_put_handle(struct hl_mem_mgr *mmg, u64 handle)
/**
* hl_mmap_mem_buf_alloc - allocate a new mappable buffer
*
- * @mmg: parent unifed memory manager
+ * @mmg: parent unified memory manager
* @behavior: behavior object describing this buffer polymorphic behavior
* @gfp: gfp flags to use for the memory allocations
* @args: additional args passed to behavior->alloc
@@ -222,7 +222,7 @@ static const struct vm_operations_struct hl_mmap_mem_buf_vm_ops = {
/**
* hl_mem_mgr_mmap - map the given buffer to the user
*
- * @mmg: unifed memory manager
+ * @mmg: unified memory manager
* @vma: the vma object for which mmap was closed.
* @args: additional args passed to behavior->mmap
*
@@ -322,7 +322,7 @@ void hl_mem_mgr_init(struct device *dev, struct hl_mem_mgr *mmg)
/**
* hl_mem_mgr_fini - release unified memory manager
*
- * @mmg: parent unifed memory manager
+ * @mmg: parent unified memory manager
*
* Release the unified memory manager. Shall be called from an interrupt context.
*/
diff --git a/drivers/misc/habanalabs/common/mmu/mmu.c b/drivers/misc/habanalabs/common/mmu/mmu.c
index 60740de47b34..cf8946266615 100644
--- a/drivers/misc/habanalabs/common/mmu/mmu.c
+++ b/drivers/misc/habanalabs/common/mmu/mmu.c
@@ -9,6 +9,8 @@
#include "../habanalabs.h"
+#include <trace/events/habanalabs.h>
+
/**
* hl_mmu_get_funcs() - get MMU functions structure
* @hdev: habanalabs device structure.
@@ -45,6 +47,8 @@ int hl_mmu_init(struct hl_device *hdev)
if (!hdev->mmu_enable)
return 0;
+ mutex_init(&hdev->mmu_lock);
+
if (hdev->mmu_func[MMU_DR_PGT].init != NULL) {
rc = hdev->mmu_func[MMU_DR_PGT].init(hdev);
if (rc)
@@ -86,6 +90,8 @@ void hl_mmu_fini(struct hl_device *hdev)
if (hdev->mmu_func[MMU_HR_PGT].fini != NULL)
hdev->mmu_func[MMU_HR_PGT].fini(hdev);
+
+ mutex_destroy(&hdev->mmu_lock);
}
/**
@@ -104,8 +110,6 @@ int hl_mmu_ctx_init(struct hl_ctx *ctx)
if (!hdev->mmu_enable)
return 0;
- mutex_init(&ctx->mmu_lock);
-
if (hdev->mmu_func[MMU_DR_PGT].ctx_init != NULL) {
rc = hdev->mmu_func[MMU_DR_PGT].ctx_init(ctx);
if (rc)
@@ -149,8 +153,6 @@ void hl_mmu_ctx_fini(struct hl_ctx *ctx)
if (hdev->mmu_func[MMU_HR_PGT].ctx_fini != NULL)
hdev->mmu_func[MMU_HR_PGT].ctx_fini(ctx);
-
- mutex_destroy(&ctx->mmu_lock);
}
/*
@@ -259,6 +261,9 @@ int hl_mmu_unmap_page(struct hl_ctx *ctx, u64 virt_addr, u32 page_size, bool flu
if (flush_pte)
mmu_funcs->flush(ctx);
+ if (trace_habanalabs_mmu_unmap_enabled() && !rc)
+ trace_habanalabs_mmu_unmap(hdev->dev, virt_addr, 0, page_size, flush_pte);
+
return rc;
}
@@ -344,6 +349,8 @@ int hl_mmu_map_page(struct hl_ctx *ctx, u64 virt_addr, u64 phys_addr, u32 page_s
if (flush_pte)
mmu_funcs->flush(ctx);
+ trace_habanalabs_mmu_map(hdev->dev, virt_addr, phys_addr, page_size, flush_pte);
+
return 0;
err:
@@ -403,6 +410,8 @@ int hl_mmu_map_contiguous(struct hl_ctx *ctx, u64 virt_addr,
dev_err(hdev->dev,
"Map failed for va 0x%llx to pa 0x%llx\n",
curr_va, curr_pa);
+ /* last mapping failed so don't try to unmap it - reduce off by page_size */
+ off -= page_size;
goto unmap;
}
}
@@ -600,9 +609,9 @@ int hl_mmu_get_tlb_info(struct hl_ctx *ctx, u64 virt_addr,
pgt_residency = mmu_prop->host_resident ? MMU_HR_PGT : MMU_DR_PGT;
mmu_funcs = hl_mmu_get_funcs(hdev, pgt_residency, is_dram_addr);
- mutex_lock(&ctx->mmu_lock);
+ mutex_lock(&hdev->mmu_lock);
rc = mmu_funcs->get_tlb_info(ctx, virt_addr, hops);
- mutex_unlock(&ctx->mmu_lock);
+ mutex_unlock(&hdev->mmu_lock);
if (rc)
return rc;
@@ -692,16 +701,16 @@ static void hl_mmu_prefetch_work_function(struct work_struct *work)
{
struct hl_prefetch_work *pfw = container_of(work, struct hl_prefetch_work, pf_work);
struct hl_ctx *ctx = pfw->ctx;
+ struct hl_device *hdev = ctx->hdev;
- if (!hl_device_operational(ctx->hdev, NULL))
+ if (!hl_device_operational(hdev, NULL))
goto put_ctx;
- mutex_lock(&ctx->mmu_lock);
+ mutex_lock(&hdev->mmu_lock);
- ctx->hdev->asic_funcs->mmu_prefetch_cache_range(ctx, pfw->flags, pfw->asid,
- pfw->va, pfw->size);
+ hdev->asic_funcs->mmu_prefetch_cache_range(ctx, pfw->flags, pfw->asid, pfw->va, pfw->size);
- mutex_unlock(&ctx->mmu_lock);
+ mutex_unlock(&hdev->mmu_lock);
put_ctx:
/*
diff --git a/drivers/misc/habanalabs/common/sysfs.c b/drivers/misc/habanalabs/common/sysfs.c
index 6c5271f01160..36e9814139d1 100644
--- a/drivers/misc/habanalabs/common/sysfs.c
+++ b/drivers/misc/habanalabs/common/sysfs.c
@@ -375,6 +375,14 @@ out:
return max_size;
}
+static ssize_t security_enabled_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct hl_device *hdev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", hdev->asic_prop.fw_security_enabled);
+}
+
static DEVICE_ATTR_RO(armcp_kernel_ver);
static DEVICE_ATTR_RO(armcp_ver);
static DEVICE_ATTR_RO(cpld_ver);
@@ -393,6 +401,7 @@ static DEVICE_ATTR_RO(status);
static DEVICE_ATTR_RO(thermal_ver);
static DEVICE_ATTR_RO(uboot_ver);
static DEVICE_ATTR_RO(fw_os_ver);
+static DEVICE_ATTR_RO(security_enabled);
static struct bin_attribute bin_attr_eeprom = {
.attr = {.name = "eeprom", .mode = (0444)},
@@ -417,6 +426,7 @@ static struct attribute *hl_dev_attrs[] = {
&dev_attr_thermal_ver.attr,
&dev_attr_uboot_ver.attr,
&dev_attr_fw_os_ver.attr,
+ &dev_attr_security_enabled.attr,
NULL,
};
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index cb2988e2c7a8..92560414e843 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -899,12 +899,13 @@ static int gaudi_early_fini(struct hl_device *hdev)
*/
static int gaudi_fetch_psoc_frequency(struct hl_device *hdev)
{
- struct asic_fixed_properties *prop = &hdev->asic_prop;
u32 nr = 0, nf = 0, od = 0, div_fctr = 0, pll_clk, div_sel;
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
u16 pll_freq_arr[HL_PLL_NUM_OUTPUTS], freq;
int rc;
- if (hdev->asic_prop.fw_security_enabled) {
+ if ((hdev->fw_components & FW_TYPE_LINUX) &&
+ (prop->fw_app_cpu_boot_dev_sts0 & CPU_BOOT_DEV_STS0_PLL_INFO_EN)) {
struct gaudi_device *gaudi = hdev->asic_specific;
if (!(gaudi->hw_cap_initialized & HW_CAP_CPU_Q))
@@ -939,9 +940,7 @@ static int gaudi_fetch_psoc_frequency(struct hl_device *hdev)
else
freq = pll_clk / (div_fctr + 1);
} else {
- dev_warn(hdev->dev,
- "Received invalid div select value: %d",
- div_sel);
+ dev_warn(hdev->dev, "Received invalid div select value: %#x", div_sel);
freq = 0;
}
}
@@ -985,9 +984,10 @@ static int _gaudi_init_tpc_mem(struct hl_device *hdev,
init_tpc_mem_pkt->ctl = cpu_to_le32(ctl);
init_tpc_mem_pkt->src_addr = cpu_to_le64(tpc_kernel_src_addr);
- dst_addr = (prop->sram_user_base_address &
- GAUDI_PKT_LIN_DMA_DST_ADDR_MASK) >>
- GAUDI_PKT_LIN_DMA_DST_ADDR_SHIFT;
+
+ /* TPC_CMD is configured with I$ prefetch enabled, so address should be aligned to 8KB */
+ dst_addr = FIELD_PREP(GAUDI_PKT_LIN_DMA_DST_ADDR_MASK,
+ round_up(prop->sram_user_base_address, SZ_8K));
init_tpc_mem_pkt->dst_addr |= cpu_to_le64(dst_addr);
job = hl_cs_allocate_job(hdev, QUEUE_TYPE_EXT, true);
@@ -1683,23 +1683,7 @@ disable_pci_access:
static void gaudi_late_fini(struct hl_device *hdev)
{
- const struct hwmon_channel_info **channel_info_arr;
- int i = 0;
-
- if (!hdev->hl_chip_info->info)
- return;
-
- channel_info_arr = hdev->hl_chip_info->info;
-
- while (channel_info_arr[i]) {
- kfree(channel_info_arr[i]->config);
- kfree(channel_info_arr[i]);
- i++;
- }
-
- kfree(channel_info_arr);
-
- hdev->hl_chip_info->info = NULL;
+ hl_hwmon_release_resources(hdev);
}
static int gaudi_alloc_cpu_accessible_dma_mem(struct hl_device *hdev)
@@ -4723,7 +4707,7 @@ static int gaudi_scrub_device_mem(struct hl_device *hdev)
addr = prop->sram_user_base_address;
size = hdev->pldm ? 0x10000 : prop->sram_size - SRAM_USER_BASE_OFFSET;
- dev_dbg(hdev->dev, "Scrubing SRAM: 0x%09llx - 0x%09llx val: 0x%llx\n",
+ dev_dbg(hdev->dev, "Scrubbing SRAM: 0x%09llx - 0x%09llx val: 0x%llx\n",
addr, addr + size, val);
rc = gaudi_memset_device_memory(hdev, addr, size, val);
if (rc) {
@@ -6911,9 +6895,9 @@ static void gaudi_handle_sw_config_stream_data(struct hl_device *hdev, u32 strea
stream, cq_ptr, size);
if (event_mask & HL_NOTIFIER_EVENT_UNDEFINED_OPCODE) {
- hdev->last_error.undef_opcode.cq_addr = cq_ptr;
- hdev->last_error.undef_opcode.cq_size = size;
- hdev->last_error.undef_opcode.stream_id = stream;
+ hdev->captured_err_info.undef_opcode.cq_addr = cq_ptr;
+ hdev->captured_err_info.undef_opcode.cq_size = size;
+ hdev->captured_err_info.undef_opcode.stream_id = stream;
}
}
@@ -6979,7 +6963,7 @@ static void gaudi_handle_last_pqes_on_err(struct hl_device *hdev, u32 qid_base,
}
if (event_mask & HL_NOTIFIER_EVENT_UNDEFINED_OPCODE) {
- struct undefined_opcode_info *undef_opcode = &hdev->last_error.undef_opcode;
+ struct undefined_opcode_info *undef_opcode = &hdev->captured_err_info.undef_opcode;
u32 arr_idx = undef_opcode->cb_addr_streams_len;
if (arr_idx == 0) {
@@ -7063,11 +7047,11 @@ static void gaudi_handle_qman_err_generic(struct hl_device *hdev,
}
/* check for undefined opcode */
if (glbl_sts_val & TPC0_QM_GLBL_STS1_CP_UNDEF_CMD_ERR_MASK &&
- hdev->last_error.undef_opcode.write_enable) {
- memset(&hdev->last_error.undef_opcode, 0,
- sizeof(hdev->last_error.undef_opcode));
+ hdev->captured_err_info.undef_opcode.write_enable) {
+ memset(&hdev->captured_err_info.undef_opcode, 0,
+ sizeof(hdev->captured_err_info.undef_opcode));
- hdev->last_error.undef_opcode.write_enable = false;
+ hdev->captured_err_info.undef_opcode.write_enable = false;
*event_mask |= HL_NOTIFIER_EVENT_UNDEFINED_OPCODE;
}
@@ -7233,12 +7217,6 @@ static void gaudi_handle_qman_err(struct hl_device *hdev, u16 event_type, u64 *e
switch (event_type) {
case GAUDI_EVENT_TPC0_QM ... GAUDI_EVENT_TPC7_QM:
- /* In TPC QM event, notify on TPC assertion. While there isn't
- * a specific event for assertion yet, the FW generates QM event.
- * The SW upper layer will inspect an internal mapped area to indicate
- * if the event is a tpc assertion or tpc QM.
- */
- *event_mask |= HL_NOTIFIER_EVENT_TPC_ASSERT;
index = event_type - GAUDI_EVENT_TPC0_QM;
qid_base = GAUDI_QUEUE_ID_TPC_0_0 + index * QMAN_STREAMS;
qman_base = mmTPC0_QM_BASE + index * TPC_QMAN_OFFSET;
@@ -7349,18 +7327,19 @@ static void gaudi_print_irq_info(struct hl_device *hdev, u16 event_type,
gaudi_print_and_get_mmu_error_info(hdev, &razwi_addr, &razwi_type);
/* In case it's the first razwi, save its parameters*/
- rc = atomic_cmpxchg(&hdev->last_error.razwi.write_enable, 1, 0);
+ rc = atomic_cmpxchg(&hdev->captured_err_info.razwi.write_enable, 1, 0);
if (rc) {
- hdev->last_error.razwi.timestamp = ktime_get();
- hdev->last_error.razwi.addr = razwi_addr;
- hdev->last_error.razwi.engine_id_1 = engine_id_1;
- hdev->last_error.razwi.engine_id_2 = engine_id_2;
+ hdev->captured_err_info.razwi.timestamp = ktime_get();
+ hdev->captured_err_info.razwi.addr = razwi_addr;
+ hdev->captured_err_info.razwi.engine_id_1 = engine_id_1;
+ hdev->captured_err_info.razwi.engine_id_2 = engine_id_2;
/*
* If first engine id holds non valid value the razwi initiator
* does not have engine id
*/
- hdev->last_error.razwi.non_engine_initiator = (engine_id_1 == U16_MAX);
- hdev->last_error.razwi.type = razwi_type;
+ hdev->captured_err_info.razwi.non_engine_initiator =
+ (engine_id_1 == U16_MAX);
+ hdev->captured_err_info.razwi.type = razwi_type;
}
}
@@ -7427,7 +7406,7 @@ static void gaudi_print_nic_axi_irq_info(struct hl_device *hdev, u16 event_type,
event_type, desc);
}
-static int gaudi_non_hard_reset_late_init(struct hl_device *hdev)
+static int gaudi_compute_reset_late_init(struct hl_device *hdev)
{
/* GAUDI doesn't support any reset except hard-reset */
return -EPERM;
@@ -7702,6 +7681,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
case GAUDI_EVENT_NIC0_CS_DBG_DERR ... GAUDI_EVENT_NIC4_CS_DBG_DERR:
gaudi_print_irq_info(hdev, event_type, true);
gaudi_handle_ecc_event(hdev, event_type, &eq_entry->ecc_data);
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
fw_fatal_err_flag = HL_DRV_RESET_FW_FATAL_ERR;
goto reset_device;
@@ -7711,6 +7691,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
case GAUDI_EVENT_PLL0 ... GAUDI_EVENT_PLL17:
gaudi_print_irq_info(hdev, event_type, false);
fw_fatal_err_flag = HL_DRV_RESET_FW_FATAL_ERR;
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
goto reset_device;
case GAUDI_EVENT_HBM0_SPI_0:
@@ -7722,6 +7703,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
gaudi_hbm_event_to_dev(event_type),
&eq_entry->hbm_ecc_data);
fw_fatal_err_flag = HL_DRV_RESET_FW_FATAL_ERR;
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
goto reset_device;
case GAUDI_EVENT_HBM0_SPI_1:
@@ -7733,6 +7715,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
gaudi_hbm_event_to_dev(event_type),
&eq_entry->hbm_ecc_data);
hl_fw_unmask_irq(hdev, event_type);
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI_EVENT_TPC0_DEC:
@@ -7743,10 +7726,17 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
case GAUDI_EVENT_TPC5_DEC:
case GAUDI_EVENT_TPC6_DEC:
case GAUDI_EVENT_TPC7_DEC:
+ /* In TPC DEC event, notify on TPC assertion. While there isn't
+ * a specific event for assertion yet, the FW generates TPC DEC event.
+ * The SW upper layer will inspect an internal mapped area to indicate
+ * if the event is a TPC Assertion or a "real" TPC DEC.
+ */
+ event_mask |= HL_NOTIFIER_EVENT_TPC_ASSERT;
gaudi_print_irq_info(hdev, event_type, true);
reset_required = gaudi_tpc_read_interrupts(hdev,
tpc_dec_event_to_tpc_id(event_type),
"AXI_SLV_DEC_Error");
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
if (reset_required) {
dev_err(hdev->dev, "reset required due to %s\n",
gaudi_irq_map_table[event_type].name);
@@ -7755,6 +7745,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
goto reset_device;
} else {
hl_fw_unmask_irq(hdev, event_type);
+ event_mask |= HL_NOTIFIER_EVENT_DEVICE_RESET;
}
break;
@@ -7770,6 +7761,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
reset_required = gaudi_tpc_read_interrupts(hdev,
tpc_krn_event_to_tpc_id(event_type),
"KRN_ERR");
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
if (reset_required) {
dev_err(hdev->dev, "reset required due to %s\n",
gaudi_irq_map_table[event_type].name);
@@ -7778,6 +7770,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
goto reset_device;
} else {
hl_fw_unmask_irq(hdev, event_type);
+ event_mask |= HL_NOTIFIER_EVENT_DEVICE_RESET;
}
break;
@@ -7806,9 +7799,25 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
gaudi_print_irq_info(hdev, event_type, true);
gaudi_handle_ecc_event(hdev, event_type, &eq_entry->ecc_data);
hl_fw_unmask_irq(hdev, event_type);
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI_EVENT_PCIE_DEC:
+ case GAUDI_EVENT_CPU_AXI_SPLITTER:
+ case GAUDI_EVENT_PSOC_AXI_DEC:
+ case GAUDI_EVENT_PSOC_PRSTN_FALL:
+ gaudi_print_irq_info(hdev, event_type, true);
+ hl_fw_unmask_irq(hdev, event_type);
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
+ break;
+
+ case GAUDI_EVENT_MMU_PAGE_FAULT:
+ case GAUDI_EVENT_MMU_WR_PERM:
+ gaudi_print_irq_info(hdev, event_type, true);
+ hl_fw_unmask_irq(hdev, event_type);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
+ break;
+
case GAUDI_EVENT_MME0_WBC_RSP:
case GAUDI_EVENT_MME0_SBAB0_RSP:
case GAUDI_EVENT_MME1_WBC_RSP:
@@ -7817,11 +7826,6 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
case GAUDI_EVENT_MME2_SBAB0_RSP:
case GAUDI_EVENT_MME3_WBC_RSP:
case GAUDI_EVENT_MME3_SBAB0_RSP:
- case GAUDI_EVENT_CPU_AXI_SPLITTER:
- case GAUDI_EVENT_PSOC_AXI_DEC:
- case GAUDI_EVENT_PSOC_PRSTN_FALL:
- case GAUDI_EVENT_MMU_PAGE_FAULT:
- case GAUDI_EVENT_MMU_WR_PERM:
case GAUDI_EVENT_RAZWI_OR_ADC:
case GAUDI_EVENT_MME0_QM ... GAUDI_EVENT_MME2_QM:
case GAUDI_EVENT_DMA0_QM ... GAUDI_EVENT_DMA7_QM:
@@ -7841,10 +7845,12 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
gaudi_print_irq_info(hdev, event_type, true);
gaudi_handle_qman_err(hdev, event_type, &event_mask);
hl_fw_unmask_irq(hdev, event_type);
+ event_mask |= (HL_NOTIFIER_EVENT_USER_ENGINE_ERR | HL_NOTIFIER_EVENT_DEVICE_RESET);
break;
case GAUDI_EVENT_RAZWI_OR_ADC_SW:
gaudi_print_irq_info(hdev, event_type, true);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
goto reset_device;
case GAUDI_EVENT_TPC0_BMON_SPMU:
@@ -7858,11 +7864,13 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
case GAUDI_EVENT_DMA_BM_CH0 ... GAUDI_EVENT_DMA_BM_CH7:
gaudi_print_irq_info(hdev, event_type, false);
hl_fw_unmask_irq(hdev, event_type);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI_EVENT_NIC_SEI_0 ... GAUDI_EVENT_NIC_SEI_4:
gaudi_print_nic_axi_irq_info(hdev, event_type, &data);
hl_fw_unmask_irq(hdev, event_type);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI_EVENT_DMA_IF_SEI_0 ... GAUDI_EVENT_DMA_IF_SEI_3:
@@ -7870,6 +7878,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
gaudi_print_sm_sei_info(hdev, event_type,
&eq_entry->sm_sei_data);
rc = hl_state_dump(hdev);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
if (rc)
dev_err(hdev->dev,
"Error during system state dump %d\n", rc);
@@ -7880,6 +7889,7 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
break;
case GAUDI_EVENT_FIX_POWER_ENV_S ... GAUDI_EVENT_FIX_THERMAL_ENV_E:
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
gaudi_print_clk_change_info(hdev, event_type);
hl_fw_unmask_irq(hdev, event_type);
break;
@@ -7889,20 +7899,24 @@ static void gaudi_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entr
dev_err(hdev->dev,
"Received high temp H/W interrupt %d (cause %d)\n",
event_type, cause);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI_EVENT_DEV_RESET_REQ:
gaudi_print_irq_info(hdev, event_type, false);
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
goto reset_device;
case GAUDI_EVENT_PKT_QUEUE_OUT_SYNC:
gaudi_print_irq_info(hdev, event_type, false);
gaudi_print_out_of_sync_info(hdev, &eq_entry->pkt_sync_err);
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
goto reset_device;
case GAUDI_EVENT_FW_ALIVE_S:
gaudi_print_irq_info(hdev, event_type, false);
gaudi_print_fw_alive_info(hdev, &eq_entry->fw_alive);
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
goto reset_device;
default:
@@ -8066,8 +8080,8 @@ static int gaudi_cpucp_info_get(struct hl_device *hdev)
return 0;
}
-static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
- u8 mask_len, struct seq_file *s)
+static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr, u8 mask_len,
+ struct engines_data *e)
{
struct gaudi_device *gaudi = hdev->asic_specific;
const char *fmt = "%-5d%-9s%#-14x%#-12x%#x\n";
@@ -8079,8 +8093,8 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
u64 offset;
int i, dma_id, port;
- if (s)
- seq_puts(s,
+ if (e)
+ hl_engine_data_sprintf(e,
"\nDMA is_idle QM_GLBL_STS0 QM_CGM_STS DMA_CORE_STS0\n"
"--- ------- ------------ ---------- -------------\n");
@@ -8097,14 +8111,14 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
if (mask && !is_eng_idle)
set_bit(GAUDI_ENGINE_ID_DMA_0 + dma_id, mask);
- if (s)
- seq_printf(s, fmt, dma_id,
+ if (e)
+ hl_engine_data_sprintf(e, fmt, dma_id,
is_eng_idle ? "Y" : "N", qm_glbl_sts0,
qm_cgm_sts, dma_core_sts0);
}
- if (s)
- seq_puts(s,
+ if (e)
+ hl_engine_data_sprintf(e,
"\nTPC is_idle QM_GLBL_STS0 QM_CGM_STS CFG_STATUS\n"
"--- ------- ------------ ---------- ----------\n");
@@ -8119,14 +8133,14 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
if (mask && !is_eng_idle)
set_bit(GAUDI_ENGINE_ID_TPC_0 + i, mask);
- if (s)
- seq_printf(s, fmt, i,
+ if (e)
+ hl_engine_data_sprintf(e, fmt, i,
is_eng_idle ? "Y" : "N",
qm_glbl_sts0, qm_cgm_sts, tpc_cfg_sts);
}
- if (s)
- seq_puts(s,
+ if (e)
+ hl_engine_data_sprintf(e,
"\nMME is_idle QM_GLBL_STS0 QM_CGM_STS ARCH_STATUS\n"
"--- ------- ------------ ---------- -----------\n");
@@ -8147,20 +8161,21 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
if (mask && !is_eng_idle)
set_bit(GAUDI_ENGINE_ID_MME_0 + i, mask);
- if (s) {
+ if (e) {
if (!is_slave)
- seq_printf(s, fmt, i,
+ hl_engine_data_sprintf(e, fmt, i,
is_eng_idle ? "Y" : "N",
qm_glbl_sts0, qm_cgm_sts, mme_arch_sts);
else
- seq_printf(s, mme_slave_fmt, i,
+ hl_engine_data_sprintf(e, mme_slave_fmt, i,
is_eng_idle ? "Y" : "N", "-",
"-", mme_arch_sts);
}
}
- if (s)
- seq_puts(s, "\nNIC is_idle QM_GLBL_STS0 QM_CGM_STS\n"
+ if (e)
+ hl_engine_data_sprintf(e,
+ "\nNIC is_idle QM_GLBL_STS0 QM_CGM_STS\n"
"--- ------- ------------ ----------\n");
for (i = 0 ; i < (NIC_NUMBER_OF_ENGINES / 2) ; i++) {
@@ -8174,8 +8189,8 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
if (mask && !is_eng_idle)
set_bit(GAUDI_ENGINE_ID_NIC_0 + port, mask);
- if (s)
- seq_printf(s, nic_fmt, port,
+ if (e)
+ hl_engine_data_sprintf(e, nic_fmt, port,
is_eng_idle ? "Y" : "N",
qm_glbl_sts0, qm_cgm_sts);
}
@@ -8189,15 +8204,15 @@ static bool gaudi_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
if (mask && !is_eng_idle)
set_bit(GAUDI_ENGINE_ID_NIC_0 + port, mask);
- if (s)
- seq_printf(s, nic_fmt, port,
+ if (e)
+ hl_engine_data_sprintf(e, nic_fmt, port,
is_eng_idle ? "Y" : "N",
qm_glbl_sts0, qm_cgm_sts);
}
}
- if (s)
- seq_puts(s, "\n");
+ if (e)
+ hl_engine_data_sprintf(e, "\n");
return is_idle;
}
@@ -8392,13 +8407,13 @@ static int gaudi_internal_cb_pool_init(struct hl_device *hdev,
goto destroy_internal_cb_pool;
}
- mutex_lock(&ctx->mmu_lock);
+ mutex_lock(&hdev->mmu_lock);
rc = hl_mmu_map_contiguous(ctx, hdev->internal_cb_va_base,
hdev->internal_cb_pool_dma_addr,
HOST_SPACE_INTERNAL_CB_SZ);
hl_mmu_invalidate_cache(hdev, false, MMU_OP_USERPTR);
- mutex_unlock(&ctx->mmu_lock);
+ mutex_unlock(&hdev->mmu_lock);
if (rc)
goto unreserve_internal_cb_pool;
@@ -8425,13 +8440,13 @@ static void gaudi_internal_cb_pool_fini(struct hl_device *hdev,
if (!(gaudi->hw_cap_initialized & HW_CAP_MMU))
return;
- mutex_lock(&ctx->mmu_lock);
+ mutex_lock(&hdev->mmu_lock);
hl_mmu_unmap_contiguous(ctx, hdev->internal_cb_va_base,
HOST_SPACE_INTERNAL_CB_SZ);
hl_unreserve_va_block(hdev, ctx, hdev->internal_cb_va_base,
HOST_SPACE_INTERNAL_CB_SZ);
hl_mmu_invalidate_cache(hdev, true, MMU_OP_USERPTR);
- mutex_unlock(&ctx->mmu_lock);
+ mutex_unlock(&hdev->mmu_lock);
gen_pool_destroy(hdev->internal_cb_pool);
@@ -9148,6 +9163,11 @@ static void gaudi_add_device_attr(struct hl_device *hdev, struct attribute_group
dev_vrm_attr_grp->attrs = gaudi_vrm_dev_attrs;
}
+static int gaudi_send_device_activity(struct hl_device *hdev, bool open)
+{
+ return 0;
+}
+
static const struct hl_asic_funcs gaudi_funcs = {
.early_init = gaudi_early_init,
.early_fini = gaudi_early_fini,
@@ -9192,11 +9212,9 @@ static const struct hl_asic_funcs gaudi_funcs = {
.send_heartbeat = gaudi_send_heartbeat,
.debug_coresight = gaudi_debug_coresight,
.is_device_idle = gaudi_is_device_idle,
- .non_hard_reset_late_init = gaudi_non_hard_reset_late_init,
+ .compute_reset_late_init = gaudi_compute_reset_late_init,
.hw_queues_lock = gaudi_hw_queues_lock,
.hw_queues_unlock = gaudi_hw_queues_unlock,
- .kdma_lock = NULL,
- .kdma_unlock = NULL,
.get_pci_id = gaudi_get_pci_id,
.get_eeprom_data = gaudi_get_eeprom_data,
.get_monitor_dump = gaudi_get_monitor_dump,
@@ -9242,6 +9260,7 @@ static const struct hl_asic_funcs gaudi_funcs = {
.mmu_get_real_page_size = hl_mmu_get_real_page_size,
.access_dev_mem = hl_access_dev_mem,
.set_dram_bar_base = gaudi_set_hbm_bar_base,
+ .send_device_activity = gaudi_send_device_activity,
};
/**
diff --git a/drivers/misc/habanalabs/gaudi2/gaudi2.c b/drivers/misc/habanalabs/gaudi2/gaudi2.c
index 98336a1a84b0..75c4bef7841c 100644
--- a/drivers/misc/habanalabs/gaudi2/gaudi2.c
+++ b/drivers/misc/habanalabs/gaudi2/gaudi2.c
@@ -21,7 +21,7 @@
#define GAUDI2_DMA_POOL_BLK_SIZE SZ_256 /* 256 bytes */
-#define GAUDI2_RESET_TIMEOUT_MSEC 500 /* 500ms */
+#define GAUDI2_RESET_TIMEOUT_MSEC 2000 /* 2000ms */
#define GAUDI2_RESET_POLL_TIMEOUT_USEC 50000 /* 50ms */
#define GAUDI2_PLDM_HRESET_TIMEOUT_MSEC 25000 /* 25s */
#define GAUDI2_PLDM_SRESET_TIMEOUT_MSEC 25000 /* 25s */
@@ -117,6 +117,12 @@
#define MMU_RANGE_INV_ASID_EN_SHIFT 1
#define MMU_RANGE_INV_ASID_SHIFT 2
+/* The last SPI_SEI cause bit, "burst_fifo_full", is expected to be triggered in PMMU because it has
+ * a 2 entries FIFO, and hence it is not enabled for it.
+ */
+#define GAUDI2_PMMU_SPI_SEI_ENABLE_MASK GENMASK(GAUDI2_NUM_OF_MMU_SPI_SEI_CAUSE - 2, 0)
+#define GAUDI2_HMMU_SPI_SEI_ENABLE_MASK GENMASK(GAUDI2_NUM_OF_MMU_SPI_SEI_CAUSE - 1, 0)
+
#define GAUDI2_MAX_STRING_LEN 64
#define GAUDI2_VDEC_MSIX_ENTRIES (GAUDI2_IRQ_NUM_SHARED_DEC1_ABNRM - \
@@ -610,7 +616,7 @@ static const char * const guadi2_mme_error_cause[GAUDI2_NUM_OF_MME_ERR_CAUSE] =
"qman_axi_err",
"wap sei (wbc axi err)",
"arc sei",
- "mme_cfg_unalign_addr",
+ "cfg access error",
"qm_sw_err",
"sbte_dbg_intr_0",
"sbte_dbg_intr_1",
@@ -1525,17 +1531,57 @@ static const u32 rtr_coordinates_to_rtr_id[NUM_OF_RTR_PER_DCORE * NUM_OF_DCORES]
RTR_ID_X_Y(17, 11)
};
+enum rtr_id {
+ DCORE0_RTR0,
+ DCORE0_RTR1,
+ DCORE0_RTR2,
+ DCORE0_RTR3,
+ DCORE0_RTR4,
+ DCORE0_RTR5,
+ DCORE0_RTR6,
+ DCORE0_RTR7,
+ DCORE1_RTR0,
+ DCORE1_RTR1,
+ DCORE1_RTR2,
+ DCORE1_RTR3,
+ DCORE1_RTR4,
+ DCORE1_RTR5,
+ DCORE1_RTR6,
+ DCORE1_RTR7,
+ DCORE2_RTR0,
+ DCORE2_RTR1,
+ DCORE2_RTR2,
+ DCORE2_RTR3,
+ DCORE2_RTR4,
+ DCORE2_RTR5,
+ DCORE2_RTR6,
+ DCORE2_RTR7,
+ DCORE3_RTR0,
+ DCORE3_RTR1,
+ DCORE3_RTR2,
+ DCORE3_RTR3,
+ DCORE3_RTR4,
+ DCORE3_RTR5,
+ DCORE3_RTR6,
+ DCORE3_RTR7,
+};
+
static const u32 gaudi2_tpc_initiator_rtr_id[NUM_OF_TPC_PER_DCORE * NUM_OF_DCORES + 1] = {
- 1, 1, 2, 2, 3, 3, 14, 14, 13, 13, 12, 12, 19, 19, 18, 18, 17,
- 17, 28, 28, 29, 29, 30, 30, 0
+ DCORE0_RTR1, DCORE0_RTR1, DCORE0_RTR2, DCORE0_RTR2, DCORE0_RTR3, DCORE0_RTR3,
+ DCORE1_RTR6, DCORE1_RTR6, DCORE1_RTR5, DCORE1_RTR5, DCORE1_RTR4, DCORE1_RTR4,
+ DCORE2_RTR3, DCORE2_RTR3, DCORE2_RTR2, DCORE2_RTR2, DCORE2_RTR1, DCORE2_RTR1,
+ DCORE3_RTR4, DCORE3_RTR4, DCORE3_RTR5, DCORE3_RTR5, DCORE3_RTR6, DCORE3_RTR6,
+ DCORE0_RTR0
};
static const u32 gaudi2_dec_initiator_rtr_id[NUMBER_OF_DEC] = {
- 0, 0, 15, 15, 16, 16, 31, 31, 0, 0
+ DCORE0_RTR0, DCORE0_RTR0, DCORE1_RTR7, DCORE1_RTR7, DCORE2_RTR0, DCORE2_RTR0,
+ DCORE3_RTR7, DCORE3_RTR7, DCORE0_RTR0, DCORE0_RTR0
};
static const u32 gaudi2_nic_initiator_rtr_id[NIC_NUMBER_OF_MACROS] = {
- 15, 15, 15, 15, 15, 16, 16, 16, 16, 31, 31, 31
+ DCORE1_RTR7, DCORE1_RTR7, DCORE1_RTR7, DCORE1_RTR7, DCORE1_RTR7, DCORE2_RTR0,
+ DCORE2_RTR0, DCORE2_RTR0, DCORE2_RTR0, DCORE3_RTR7, DCORE3_RTR7, DCORE3_RTR7
};
struct sft_info {
@@ -1548,11 +1594,11 @@ static const struct sft_info gaudi2_edma_initiator_sft_id[NUM_OF_EDMA_PER_DCORE
};
static const u32 gaudi2_pdma_initiator_rtr_id[NUM_OF_PDMA] = {
- 0, 0
+ DCORE0_RTR0, DCORE0_RTR0
};
static const u32 gaudi2_rot_initiator_rtr_id[NUM_OF_ROT] = {
- 16, 31
+ DCORE2_RTR0, DCORE3_RTR7
};
struct mme_initiators_rtr_id {
@@ -1663,7 +1709,7 @@ struct gaudi2_cache_invld_params {
};
struct gaudi2_tpc_idle_data {
- struct seq_file *s;
+ struct engines_data *e;
unsigned long *mask;
bool *is_idle;
const char *tpc_fmt;
@@ -1706,6 +1752,9 @@ void gaudi2_iterate_tpcs(struct hl_device *hdev, struct iterate_module_ctx *ctx)
int dcore, inst, tpc_seq;
u32 offset;
+ /* init the return code */
+ ctx->rc = 0;
+
for (dcore = 0; dcore < NUM_OF_DCORES; dcore++) {
for (inst = 0; inst < NUM_OF_TPC_PER_DCORE; inst++) {
tpc_seq = dcore * NUM_OF_TPC_PER_DCORE + inst;
@@ -1715,7 +1764,12 @@ void gaudi2_iterate_tpcs(struct hl_device *hdev, struct iterate_module_ctx *ctx)
offset = (DCORE_OFFSET * dcore) + (DCORE_TPC_OFFSET * inst);
- ctx->fn(hdev, dcore, inst, offset, ctx->data);
+ ctx->fn(hdev, dcore, inst, offset, ctx);
+ if (ctx->rc) {
+ dev_err(hdev->dev, "TPC iterator failed for DCORE%d TPC%d\n",
+ dcore, inst);
+ return;
+ }
}
}
@@ -1724,7 +1778,9 @@ void gaudi2_iterate_tpcs(struct hl_device *hdev, struct iterate_module_ctx *ctx)
/* special check for PCI TPC (DCORE0_TPC6) */
offset = DCORE_TPC_OFFSET * (NUM_DCORE0_TPC - 1);
- ctx->fn(hdev, 0, NUM_DCORE0_TPC - 1, offset, ctx->data);
+ ctx->fn(hdev, 0, NUM_DCORE0_TPC - 1, offset, ctx);
+ if (ctx->rc)
+ dev_err(hdev->dev, "TPC iterator failed for DCORE0 TPC6\n");
}
static bool gaudi2_host_phys_addr_valid(u64 addr)
@@ -1973,6 +2029,7 @@ static int gaudi2_set_fixed_properties(struct hl_device *hdev)
prop->pmmu_huge.end_addr = VA_HOST_SPACE_HPAGE_END;
}
+ prop->num_engine_cores = CPU_ID_MAX;
prop->cfg_size = CFG_SIZE;
prop->max_asid = MAX_ASID;
prop->num_of_events = GAUDI2_EVENT_SIZE;
@@ -2005,9 +2062,6 @@ static int gaudi2_set_fixed_properties(struct hl_device *hdev)
prop->server_type = HL_SERVER_TYPE_UNKNOWN;
- prop->cb_va_start_addr = VA_HOST_SPACE_USER_MAPPED_CB_START;
- prop->cb_va_end_addr = VA_HOST_SPACE_USER_MAPPED_CB_END;
-
prop->max_dec = NUMBER_OF_DEC;
prop->clk_pll_index = HL_GAUDI2_MME_PLL;
@@ -2477,7 +2531,6 @@ static int gaudi2_early_init(struct hl_device *hdev)
struct asic_fixed_properties *prop = &hdev->asic_prop;
struct pci_dev *pdev = hdev->pdev;
resource_size_t pci_bar_size;
- u32 fw_boot_status;
int rc;
rc = gaudi2_set_fixed_properties(hdev);
@@ -2505,22 +2558,14 @@ static int gaudi2_early_init(struct hl_device *hdev)
prop->dram_pci_bar_size = pci_resource_len(pdev, DRAM_BAR_ID);
hdev->dram_pci_bar_start = pci_resource_start(pdev, DRAM_BAR_ID);
- /* If FW security is enabled at this point it means no access to ELBI */
- if (hdev->asic_prop.fw_security_enabled) {
- hdev->asic_prop.iatu_done_by_fw = true;
- goto pci_init;
- }
-
- rc = hl_pci_elbi_read(hdev, CFG_BASE + mmCPU_BOOT_DEV_STS0, &fw_boot_status);
- if (rc)
- goto free_queue_props;
-
- /* Check whether FW is configuring iATU */
- if ((fw_boot_status & CPU_BOOT_DEV_STS0_ENABLED) &&
- (fw_boot_status & CPU_BOOT_DEV_STS0_FW_IATU_CONF_EN))
+ /*
+ * Only in pldm driver config iATU
+ */
+ if (hdev->pldm)
+ hdev->asic_prop.iatu_done_by_fw = false;
+ else
hdev->asic_prop.iatu_done_by_fw = true;
-pci_init:
rc = hl_pci_init(hdev);
if (rc)
goto free_queue_props;
@@ -2676,6 +2721,8 @@ static int gaudi2_late_init(struct hl_device *hdev)
struct gaudi2_device *gaudi2 = hdev->asic_specific;
int rc;
+ hdev->asic_prop.supports_advanced_cpucp_rc = true;
+
rc = hl_fw_send_pci_access_msg(hdev, CPUCP_PACKET_ENABLE_PCI_ACCESS,
gaudi2->virt_msix_db_dma_addr);
if (rc) {
@@ -2703,23 +2750,7 @@ disable_pci_access:
static void gaudi2_late_fini(struct hl_device *hdev)
{
- const struct hwmon_channel_info **channel_info_arr;
- int i = 0;
-
- if (!hdev->hl_chip_info->info)
- return;
-
- channel_info_arr = hdev->hl_chip_info->info;
-
- while (channel_info_arr[i]) {
- kfree(channel_info_arr[i]->config);
- kfree(channel_info_arr[i]);
- i++;
- }
-
- kfree(channel_info_arr);
-
- hdev->hl_chip_info->info = NULL;
+ hl_hwmon_release_resources(hdev);
}
static void gaudi2_user_mapped_dec_init(struct gaudi2_device *gaudi2, u32 start_idx)
@@ -2994,7 +3025,6 @@ static int gaudi2_sw_init(struct hl_device *hdev)
}
spin_lock_init(&gaudi2->hw_queues_lock);
- spin_lock_init(&gaudi2->kdma_lock);
gaudi2->scratchpad_kernel_address = hl_asic_dma_alloc_coherent(hdev, PAGE_SIZE,
&gaudi2->scratchpad_bus_address,
@@ -3551,7 +3581,7 @@ static int gaudi2_enable_msix(struct hl_device *hdev)
rc = gaudi2_dec_enable_msix(hdev);
if (rc) {
dev_err(hdev->dev, "Failed to enable decoder IRQ");
- goto free_completion_irq;
+ goto free_event_irq;
}
for (i = GAUDI2_IRQ_NUM_USER_FIRST, j = prop->user_dec_intr_count, user_irq_init_cnt = 0;
@@ -3582,6 +3612,10 @@ free_user_irq:
gaudi2_dec_disable_msix(hdev, GAUDI2_IRQ_NUM_SHARED_DEC1_ABNRM + 1);
+free_event_irq:
+ irq = pci_irq_vector(hdev->pdev, GAUDI2_IRQ_NUM_EVENT_QUEUE);
+ free_irq(irq, cq);
+
free_completion_irq:
irq = pci_irq_vector(hdev->pdev, GAUDI2_IRQ_NUM_COMPLETION);
free_irq(irq, cq);
@@ -3745,14 +3779,16 @@ static void gaudi2_stop_dec(struct hl_device *hdev)
gaudi2_stop_pcie_dec(hdev);
}
-static void gaudi2_halt_arc(struct hl_device *hdev, u32 cpu_id)
+static void gaudi2_set_arc_running_mode(struct hl_device *hdev, u32 cpu_id, u32 run_mode)
{
u32 reg_base, reg_val;
reg_base = gaudi2_arc_blocks_bases[cpu_id];
+ if (run_mode == HL_ENGINE_CORE_RUN)
+ reg_val = FIELD_PREP(ARC_FARM_ARC0_AUX_RUN_HALT_REQ_RUN_REQ_MASK, 1);
+ else
+ reg_val = FIELD_PREP(ARC_FARM_ARC0_AUX_RUN_HALT_REQ_HALT_REQ_MASK, 1);
- /* Halt ARC */
- reg_val = FIELD_PREP(ARC_FARM_ARC0_AUX_RUN_HALT_REQ_HALT_REQ_MASK, 1);
WREG32(reg_base + ARC_HALT_REQ_OFFSET, reg_val);
}
@@ -3762,8 +3798,35 @@ static void gaudi2_halt_arcs(struct hl_device *hdev)
for (arc_id = CPU_ID_SCHED_ARC0; arc_id < CPU_ID_MAX; arc_id++) {
if (gaudi2_is_arc_enabled(hdev, arc_id))
- gaudi2_halt_arc(hdev, arc_id);
+ gaudi2_set_arc_running_mode(hdev, arc_id, HL_ENGINE_CORE_HALT);
+ }
+}
+
+static int gaudi2_verify_arc_running_mode(struct hl_device *hdev, u32 cpu_id, u32 run_mode)
+{
+ int rc;
+ u32 reg_base, val, ack_mask, timeout_usec = 100000;
+
+ if (hdev->pldm)
+ timeout_usec *= 100;
+
+ reg_base = gaudi2_arc_blocks_bases[cpu_id];
+ if (run_mode == HL_ENGINE_CORE_RUN)
+ ack_mask = ARC_FARM_ARC0_AUX_RUN_HALT_ACK_RUN_ACK_MASK;
+ else
+ ack_mask = ARC_FARM_ARC0_AUX_RUN_HALT_ACK_HALT_ACK_MASK;
+
+ rc = hl_poll_timeout(hdev, reg_base + ARC_HALT_ACK_OFFSET,
+ val, ((val & ack_mask) == ack_mask),
+ 1000, timeout_usec);
+
+ if (!rc) {
+ /* Clear */
+ val = FIELD_PREP(ARC_FARM_ARC0_AUX_RUN_HALT_REQ_RUN_REQ_MASK, 0);
+ WREG32(reg_base + ARC_HALT_REQ_OFFSET, val);
}
+
+ return rc;
}
static void gaudi2_reset_arcs(struct hl_device *hdev)
@@ -3790,8 +3853,39 @@ static void gaudi2_nic_qmans_manual_flush(struct hl_device *hdev)
queue_id = GAUDI2_QUEUE_ID_NIC_0_0;
- for (i = 0 ; i < NIC_NUMBER_OF_ENGINES ; i++, queue_id += NUM_OF_PQ_PER_QMAN)
+ for (i = 0 ; i < NIC_NUMBER_OF_ENGINES ; i++, queue_id += NUM_OF_PQ_PER_QMAN) {
+ if (!(hdev->nic_ports_mask & BIT(i)))
+ continue;
+
gaudi2_qman_manual_flush_common(hdev, queue_id);
+ }
+}
+
+static int gaudi2_set_engine_cores(struct hl_device *hdev, u32 *core_ids,
+ u32 num_cores, u32 core_command)
+{
+ int i, rc;
+
+
+ for (i = 0 ; i < num_cores ; i++) {
+ if (gaudi2_is_arc_enabled(hdev, core_ids[i]))
+ gaudi2_set_arc_running_mode(hdev, core_ids[i], core_command);
+ }
+
+ for (i = 0 ; i < num_cores ; i++) {
+ if (gaudi2_is_arc_enabled(hdev, core_ids[i])) {
+ rc = gaudi2_verify_arc_running_mode(hdev, core_ids[i], core_command);
+
+ if (rc) {
+ dev_err(hdev->dev, "failed to %s arc: %d\n",
+ (core_command == HL_ENGINE_CORE_HALT) ?
+ "HALT" : "RUN", core_ids[i]);
+ return -1;
+ }
+ }
+ }
+
+ return 0;
}
static void gaudi2_halt_engines(struct hl_device *hdev, bool hard_reset, bool fw_reset)
@@ -4124,11 +4218,15 @@ static void gaudi2_init_qman_common(struct hl_device *hdev, u32 reg_base,
WREG32(reg_base + QM_GLBL_CFG2_OFFSET, 0);
/* Enable the QMAN channel.
- * PDMA1 QMAN configuration is different, as we do not allow user to
- * access CP2/3, it is reserved for the ARC usage.
+ * PDMA QMAN configuration is different, as we do not allow user to
+ * access some of the CPs.
+ * PDMA0: CP2/3 are reserved for the ARC usage.
+ * PDMA1: CP1/2/3 are reserved for the ARC usage.
*/
if (reg_base == gaudi2_qm_blocks_bases[GAUDI2_QUEUE_ID_PDMA_1_0])
WREG32(reg_base + QM_GLBL_CFG0_OFFSET, PDMA1_QMAN_ENABLE);
+ else if (reg_base == gaudi2_qm_blocks_bases[GAUDI2_QUEUE_ID_PDMA_0_0])
+ WREG32(reg_base + QM_GLBL_CFG0_OFFSET, PDMA0_QMAN_ENABLE);
else
WREG32(reg_base + QM_GLBL_CFG0_OFFSET, QMAN_ENABLE);
}
@@ -4501,10 +4599,10 @@ struct gaudi2_tpc_init_cfg_data {
};
static void gaudi2_init_tpc_config(struct hl_device *hdev, int dcore, int inst,
- u32 offset, void *data)
+ u32 offset, struct iterate_module_ctx *ctx)
{
struct gaudi2_device *gaudi2 = hdev->asic_specific;
- struct gaudi2_tpc_init_cfg_data *cfg_data = data;
+ struct gaudi2_tpc_init_cfg_data *cfg_data = ctx->data;
u32 queue_id_base;
u8 seq;
@@ -4956,8 +5054,7 @@ static int gaudi2_mmu_update_hop0_addr(struct hl_device *hdev, u32 stlb_base)
return 0;
}
-static int gaudi2_mmu_init_common(struct hl_device *hdev, u32 mmu_base,
- u32 stlb_base)
+static int gaudi2_mmu_init_common(struct hl_device *hdev, u32 mmu_base, u32 stlb_base)
{
u32 status, timeout_usec;
int rc;
@@ -4985,7 +5082,6 @@ static int gaudi2_mmu_init_common(struct hl_device *hdev, u32 mmu_base,
return rc;
WREG32(mmu_base + MMU_BYPASS_OFFSET, 0);
- WREG32(mmu_base + MMU_SPI_SEI_MASK_OFFSET, 0xF);
rc = hl_poll_timeout(
hdev,
@@ -5042,6 +5138,8 @@ static int gaudi2_pci_mmu_init(struct hl_device *hdev)
DCORE0_HMMU0_MMU_STATIC_MULTI_PAGE_SIZE_CFG_8_BITS_HOP_MODE_EN_MASK);
}
+ WREG32(mmu_base + MMU_SPI_SEI_MASK_OFFSET, GAUDI2_PMMU_SPI_SEI_ENABLE_MASK);
+
rc = gaudi2_mmu_init_common(hdev, mmu_base, stlb_base);
if (rc)
return rc;
@@ -5092,6 +5190,8 @@ static int gaudi2_dcore_hmmu_init(struct hl_device *hdev, int dcore_id,
RMWREG32(stlb_base + STLB_HOP_CONFIGURATION_OFFSET, 1,
STLB_HOP_CONFIGURATION_ONLY_LARGE_PAGE_MASK);
+ WREG32(mmu_base + MMU_SPI_SEI_MASK_OFFSET, GAUDI2_HMMU_SPI_SEI_ENABLE_MASK);
+
rc = gaudi2_mmu_init_common(hdev, mmu_base, stlb_base);
if (rc)
return rc;
@@ -5339,7 +5439,10 @@ static void gaudi2_execute_soft_reset(struct hl_device *hdev, u32 reset_sleep_ms
if (!driver_performs_reset) {
/* set SP to indicate reset request sent to FW */
- WREG32(mmCPU_RST_STATUS_TO_HOST, CPU_RST_STATUS_NA);
+ if (dyn_regs->cpu_rst_status)
+ WREG32(le32_to_cpu(dyn_regs->cpu_rst_status), CPU_RST_STATUS_NA);
+ else
+ WREG32(mmCPU_RST_STATUS_TO_HOST, CPU_RST_STATUS_NA);
WREG32(le32_to_cpu(dyn_regs->gic_host_soft_rst_irq),
gaudi2_irq_map_table[GAUDI2_EVENT_CPU_SOFT_RESET].cpu_id);
@@ -5527,10 +5630,11 @@ static bool gaudi2_is_queue_enabled(struct hl_device *hdev, u32 hw_queue_id)
u64 hw_test_cap_bit = 0;
switch (hw_queue_id) {
- case GAUDI2_QUEUE_ID_PDMA_0_0 ... GAUDI2_QUEUE_ID_PDMA_1_1:
+ case GAUDI2_QUEUE_ID_PDMA_0_0:
+ case GAUDI2_QUEUE_ID_PDMA_0_1:
+ case GAUDI2_QUEUE_ID_PDMA_1_0:
hw_cap_mask = HW_CAP_PDMA_MASK;
break;
-
case GAUDI2_QUEUE_ID_DCORE0_EDMA_0_0...GAUDI2_QUEUE_ID_DCORE0_EDMA_1_3:
hw_test_cap_bit = HW_CAP_EDMA_SHIFT +
((hw_queue_id - GAUDI2_QUEUE_ID_DCORE0_EDMA_0_0) >> 2);
@@ -6129,7 +6233,7 @@ done:
return ret_val;
}
-static int gaudi2_non_hard_reset_late_init(struct hl_device *hdev)
+static int gaudi2_compute_reset_late_init(struct hl_device *hdev)
{
struct gaudi2_device *gaudi2 = hdev->asic_specific;
size_t irq_arr_size;
@@ -6147,9 +6251,9 @@ static int gaudi2_non_hard_reset_late_init(struct hl_device *hdev)
}
static void gaudi2_is_tpc_engine_idle(struct hl_device *hdev, int dcore, int inst, u32 offset,
- void *data)
+ struct iterate_module_ctx *ctx)
{
- struct gaudi2_tpc_idle_data *idle_data = (struct gaudi2_tpc_idle_data *)data;
+ struct gaudi2_tpc_idle_data *idle_data = ctx->data;
u32 tpc_cfg_sts, qm_glbl_sts0, qm_glbl_sts1, qm_cgm_sts;
bool is_eng_idle;
int engine_idx;
@@ -6172,14 +6276,15 @@ static void gaudi2_is_tpc_engine_idle(struct hl_device *hdev, int dcore, int ins
if (idle_data->mask && !is_eng_idle)
set_bit(engine_idx, idle_data->mask);
- if (idle_data->s)
- seq_printf(idle_data->s, idle_data->tpc_fmt, dcore, inst,
+ if (idle_data->e)
+ hl_engine_data_sprintf(idle_data->e,
+ idle_data->tpc_fmt, dcore, inst,
is_eng_idle ? "Y" : "N",
qm_glbl_sts0, qm_cgm_sts, tpc_cfg_sts);
}
-static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
- u8 mask_len, struct seq_file *s)
+static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr, u8 mask_len,
+ struct engines_data *e)
{
u32 qm_glbl_sts0, qm_glbl_sts1, qm_cgm_sts, dma_core_idle_ind_mask,
mme_arch_sts, dec_swreg15, dec_enabled_bit;
@@ -6197,7 +6302,7 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
struct gaudi2_tpc_idle_data tpc_idle_data = {
.tpc_fmt = "%-6d%-5d%-9s%#-14x%#-12x%#x\n",
- .s = s,
+ .e = e,
.mask = mask,
.is_idle = &is_idle,
};
@@ -6209,8 +6314,8 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
int engine_idx, i, j;
/* EDMA, Two engines per Dcore */
- if (s)
- seq_puts(s,
+ if (e)
+ hl_engine_data_sprintf(e,
"\nCORE EDMA is_idle QM_GLBL_STS0 DMA_CORE_IDLE_IND_MASK\n"
"---- ---- ------- ------------ ----------------------\n");
@@ -6239,19 +6344,19 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
if (mask && !is_eng_idle)
set_bit(engine_idx, mask);
- if (s)
- seq_printf(s, edma_fmt, i, j,
- is_eng_idle ? "Y" : "N",
- qm_glbl_sts0,
- dma_core_idle_ind_mask);
+ if (e)
+ hl_engine_data_sprintf(e, edma_fmt, i, j,
+ is_eng_idle ? "Y" : "N",
+ qm_glbl_sts0,
+ dma_core_idle_ind_mask);
}
}
/* PDMA, Two engines in Full chip */
- if (s)
- seq_puts(s,
- "\nPDMA is_idle QM_GLBL_STS0 DMA_CORE_IDLE_IND_MASK\n"
- "---- ------- ------------ ----------------------\n");
+ if (e)
+ hl_engine_data_sprintf(e,
+ "\nPDMA is_idle QM_GLBL_STS0 DMA_CORE_IDLE_IND_MASK\n"
+ "---- ------- ------------ ----------------------\n");
for (i = 0 ; i < NUM_OF_PDMA ; i++) {
engine_idx = GAUDI2_ENGINE_ID_PDMA_0 + i;
@@ -6269,16 +6374,16 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
if (mask && !is_eng_idle)
set_bit(engine_idx, mask);
- if (s)
- seq_printf(s, pdma_fmt, i, is_eng_idle ? "Y" : "N", qm_glbl_sts0,
- dma_core_idle_ind_mask);
+ if (e)
+ hl_engine_data_sprintf(e, pdma_fmt, i, is_eng_idle ? "Y" : "N",
+ qm_glbl_sts0, dma_core_idle_ind_mask);
}
/* NIC, twelve macros in Full chip */
- if (s && hdev->nic_ports_mask)
- seq_puts(s,
- "\nNIC is_idle QM_GLBL_STS0 QM_CGM_STS\n"
- "--- ------- ------------ ----------\n");
+ if (e && hdev->nic_ports_mask)
+ hl_engine_data_sprintf(e,
+ "\nNIC is_idle QM_GLBL_STS0 QM_CGM_STS\n"
+ "--- ------- ------------ ----------\n");
for (i = 0 ; i < NIC_NUMBER_OF_ENGINES ; i++) {
if (!(i & 1))
@@ -6302,15 +6407,15 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
if (mask && !is_eng_idle)
set_bit(engine_idx, mask);
- if (s)
- seq_printf(s, nic_fmt, i, is_eng_idle ? "Y" : "N", qm_glbl_sts0,
- qm_cgm_sts);
+ if (e)
+ hl_engine_data_sprintf(e, nic_fmt, i, is_eng_idle ? "Y" : "N",
+ qm_glbl_sts0, qm_cgm_sts);
}
- if (s)
- seq_puts(s,
- "\nMME Stub is_idle QM_GLBL_STS0 MME_ARCH_STATUS\n"
- "--- ---- ------- ------------ ---------------\n");
+ if (e)
+ hl_engine_data_sprintf(e,
+ "\nMME Stub is_idle QM_GLBL_STS0 MME_ARCH_STATUS\n"
+ "--- ---- ------- ------------ ---------------\n");
/* MME, one per Dcore */
for (i = 0 ; i < NUM_OF_DCORES ; i++) {
engine_idx = GAUDI2_DCORE0_ENGINE_ID_MME + i * GAUDI2_ENGINE_ID_DCORE_OFFSET;
@@ -6327,8 +6432,8 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
is_eng_idle &= IS_MME_IDLE(mme_arch_sts);
is_idle &= is_eng_idle;
- if (s)
- seq_printf(s, mme_fmt, i, "N",
+ if (e)
+ hl_engine_data_sprintf(e, mme_fmt, i, "N",
is_eng_idle ? "Y" : "N",
qm_glbl_sts0,
mme_arch_sts);
@@ -6340,16 +6445,16 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
/*
* TPC
*/
- if (s && prop->tpc_enabled_mask)
- seq_puts(s,
+ if (e && prop->tpc_enabled_mask)
+ hl_engine_data_sprintf(e,
"\nCORE TPC is_idle QM_GLBL_STS0 QM_CGM_STS DMA_CORE_IDLE_IND_MASK\n"
"---- --- -------- ------------ ---------- ----------------------\n");
gaudi2_iterate_tpcs(hdev, &tpc_iter);
/* Decoders, two each Dcore and two shared PCIe decoders */
- if (s && (prop->decoder_enabled_mask & (~PCIE_DEC_EN_MASK)))
- seq_puts(s,
+ if (e && (prop->decoder_enabled_mask & (~PCIE_DEC_EN_MASK)))
+ hl_engine_data_sprintf(e,
"\nCORE DEC is_idle VSI_CMD_SWREG15\n"
"---- --- ------- ---------------\n");
@@ -6370,13 +6475,14 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
if (mask && !is_eng_idle)
set_bit(engine_idx, mask);
- if (s)
- seq_printf(s, dec_fmt, i, j, is_eng_idle ? "Y" : "N", dec_swreg15);
+ if (e)
+ hl_engine_data_sprintf(e, dec_fmt, i, j,
+ is_eng_idle ? "Y" : "N", dec_swreg15);
}
}
- if (s && (prop->decoder_enabled_mask & PCIE_DEC_EN_MASK))
- seq_puts(s,
+ if (e && (prop->decoder_enabled_mask & PCIE_DEC_EN_MASK))
+ hl_engine_data_sprintf(e,
"\nPCIe DEC is_idle VSI_CMD_SWREG15\n"
"-------- ------- ---------------\n");
@@ -6395,12 +6501,13 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
if (mask && !is_eng_idle)
set_bit(engine_idx, mask);
- if (s)
- seq_printf(s, pcie_dec_fmt, i, is_eng_idle ? "Y" : "N", dec_swreg15);
+ if (e)
+ hl_engine_data_sprintf(e, pcie_dec_fmt, i,
+ is_eng_idle ? "Y" : "N", dec_swreg15);
}
- if (s)
- seq_puts(s,
+ if (e)
+ hl_engine_data_sprintf(e,
"\nCORE ROT is_idle QM_GLBL_STS0 QM_CGM_STS DMA_CORE_STS0\n"
"---- ---- ------- ------------ ---------- -------------\n");
@@ -6419,8 +6526,8 @@ static bool gaudi2_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
if (mask && !is_eng_idle)
set_bit(engine_idx, mask);
- if (s)
- seq_printf(s, rot_fmt, i, 0, is_eng_idle ? "Y" : "N",
+ if (e)
+ hl_engine_data_sprintf(e, rot_fmt, i, 0, is_eng_idle ? "Y" : "N",
qm_glbl_sts0, qm_cgm_sts, "-");
}
@@ -6443,22 +6550,6 @@ static void gaudi2_hw_queues_unlock(struct hl_device *hdev)
spin_unlock(&gaudi2->hw_queues_lock);
}
-static void gaudi2_kdma_lock(struct hl_device *hdev, int dcore_id)
- __acquires(&gaudi2->kdma_lock)
-{
- struct gaudi2_device *gaudi2 = hdev->asic_specific;
-
- spin_lock(&gaudi2->kdma_lock);
-}
-
-static void gaudi2_kdma_unlock(struct hl_device *hdev, int dcore_id)
- __releases(&gaudi2->kdma_lock)
-{
- struct gaudi2_device *gaudi2 = hdev->asic_specific;
-
- spin_unlock(&gaudi2->kdma_lock);
-}
-
static u32 gaudi2_get_pci_id(struct hl_device *hdev)
{
return hdev->pdev->device;
@@ -6725,9 +6816,9 @@ static int gaudi2_mmu_shared_prepare(struct hl_device *hdev, u32 asid)
}
static void gaudi2_tpc_mmu_prepare(struct hl_device *hdev, int dcore, int inst, u32 offset,
- void *data)
+ struct iterate_module_ctx *ctx)
{
- struct gaudi2_tpc_mmu_data *mmu_data = (struct gaudi2_tpc_mmu_data *)data;
+ struct gaudi2_tpc_mmu_data *mmu_data = ctx->data;
WREG32(mmDCORE0_TPC0_CFG_AXUSER_HB_MMU_BP + offset, 0);
WREG32(mmDCORE0_TPC0_CFG_AXUSER_HB_ASID + offset, mmu_data->rw_asid);
@@ -7020,10 +7111,6 @@ static void gaudi2_razwi_rr_hbw_shared_printf_info(struct hl_device *hdev,
razwi_lo = le32_to_cpu(razwi_info->hbw.rr_aw_razwi_lo_reg);
razwi_xy = le32_to_cpu(razwi_info->hbw.rr_aw_razwi_id_reg);
}
-
- dev_err_ratelimited(hdev->dev,
- "%s-RAZWI SHARED RR HBW WR error, captured address HI 0x%x LO 0x%x, Initiator coordinates 0x%x\n",
- name, razwi_hi, razwi_lo, razwi_xy);
} else {
if (read_razwi_regs) {
razwi_hi = RREG32(rtr_mstr_if_base_addr + RR_SHRD_HBW_AR_RAZWI_HI);
@@ -7034,11 +7121,11 @@ static void gaudi2_razwi_rr_hbw_shared_printf_info(struct hl_device *hdev,
razwi_lo = le32_to_cpu(razwi_info->hbw.rr_ar_razwi_lo_reg);
razwi_xy = le32_to_cpu(razwi_info->hbw.rr_ar_razwi_id_reg);
}
-
- dev_err_ratelimited(hdev->dev,
- "%s-RAZWI SHARED RR HBW AR error, captured address HI 0x%x LO 0x%x, Initiator coordinates 0x%x\n",
- name, razwi_hi, razwi_lo, razwi_xy);
}
+
+ dev_err_ratelimited(hdev->dev,
+ "%s-RAZWI SHARED RR HBW %s error, address %#llx, Initiator coordinates 0x%x\n",
+ name, is_write ? "WR" : "RD", (u64)razwi_hi << 32 | razwi_lo, razwi_xy);
}
static void gaudi2_razwi_rr_lbw_shared_printf_info(struct hl_device *hdev,
@@ -7296,7 +7383,79 @@ static void gaudi2_check_if_razwi_happened(struct hl_device *hdev)
gaudi2_ack_module_razwi_event_handler(hdev, RAZWI_ROT, mod_idx, 0, NULL);
}
-static void gaudi2_razwi_unmapped_addr_hbw_printf_info(struct hl_device *hdev,
+static const char *gaudi2_get_initiators_name(u32 rtr_id)
+{
+ switch (rtr_id) {
+ case DCORE0_RTR0:
+ return "DEC0/1/8/9, TPC24, PDMA0/1, PMMU, PCIE_IF, EDMA0/2, HMMU0/2/4/6, CPU";
+ case DCORE0_RTR1:
+ return "TPC0/1";
+ case DCORE0_RTR2:
+ return "TPC2/3";
+ case DCORE0_RTR3:
+ return "TPC4/5";
+ case DCORE0_RTR4:
+ return "MME0_SBTE0/1";
+ case DCORE0_RTR5:
+ return "MME0_WAP0/SBTE2";
+ case DCORE0_RTR6:
+ return "MME0_CTRL_WR/SBTE3";
+ case DCORE0_RTR7:
+ return "MME0_WAP1/CTRL_RD/SBTE4";
+ case DCORE1_RTR0:
+ return "MME1_WAP1/CTRL_RD/SBTE4";
+ case DCORE1_RTR1:
+ return "MME1_CTRL_WR/SBTE3";
+ case DCORE1_RTR2:
+ return "MME1_WAP0/SBTE2";
+ case DCORE1_RTR3:
+ return "MME1_SBTE0/1";
+ case DCORE1_RTR4:
+ return "TPC10/11";
+ case DCORE1_RTR5:
+ return "TPC8/9";
+ case DCORE1_RTR6:
+ return "TPC6/7";
+ case DCORE1_RTR7:
+ return "DEC2/3, NIC0/1/2/3/4, ARC_FARM, KDMA, EDMA1/3, HMMU1/3/5/7";
+ case DCORE2_RTR0:
+ return "DEC4/5, NIC5/6/7/8, EDMA4/6, HMMU8/10/12/14, ROT0";
+ case DCORE2_RTR1:
+ return "TPC16/17";
+ case DCORE2_RTR2:
+ return "TPC14/15";
+ case DCORE2_RTR3:
+ return "TPC12/13";
+ case DCORE2_RTR4:
+ return "MME2_SBTE0/1";
+ case DCORE2_RTR5:
+ return "MME2_WAP0/SBTE2";
+ case DCORE2_RTR6:
+ return "MME2_CTRL_WR/SBTE3";
+ case DCORE2_RTR7:
+ return "MME2_WAP1/CTRL_RD/SBTE4";
+ case DCORE3_RTR0:
+ return "MME3_WAP1/CTRL_RD/SBTE4";
+ case DCORE3_RTR1:
+ return "MME3_CTRL_WR/SBTE3";
+ case DCORE3_RTR2:
+ return "MME3_WAP0/SBTE2";
+ case DCORE3_RTR3:
+ return "MME3_SBTE0/1";
+ case DCORE3_RTR4:
+ return "TPC18/19";
+ case DCORE3_RTR5:
+ return "TPC20/21";
+ case DCORE3_RTR6:
+ return "TPC22/23";
+ case DCORE3_RTR7:
+ return "DEC6/7, NIC9/10/11, EDMA5/7, HMMU9/11/13/15, ROT1, PSOC";
+ default:
+ return "N/A";
+ }
+}
+
+static void gaudi2_razwi_unmapped_addr_hbw_printf_info(struct hl_device *hdev, u32 rtr_id,
u64 rtr_ctrl_base_addr, bool is_write)
{
u32 razwi_hi, razwi_lo;
@@ -7305,50 +7464,47 @@ static void gaudi2_razwi_unmapped_addr_hbw_printf_info(struct hl_device *hdev,
razwi_hi = RREG32(rtr_ctrl_base_addr + DEC_RAZWI_HBW_AW_ADDR_HI);
razwi_lo = RREG32(rtr_ctrl_base_addr + DEC_RAZWI_HBW_AW_ADDR_LO);
- dev_err_ratelimited(hdev->dev,
- "RAZWI PSOC unmapped HBW WR error, ctr_base 0x%llx, captured address HI 0x%x, LO 0x%x\n",
- rtr_ctrl_base_addr, razwi_hi, razwi_lo);
-
/* Clear set indication */
WREG32(rtr_ctrl_base_addr + DEC_RAZWI_HBW_AW_SET, 0x1);
} else {
razwi_hi = RREG32(rtr_ctrl_base_addr + DEC_RAZWI_HBW_AR_ADDR_HI);
-
razwi_lo = RREG32(rtr_ctrl_base_addr + DEC_RAZWI_HBW_AR_ADDR_LO);
- dev_err_ratelimited(hdev->dev,
- "RAZWI PSOC unmapped HBW AR error, ctr_base 0x%llx, captured address HI 0x%x, LO 0x%x\n",
- rtr_ctrl_base_addr, razwi_hi, razwi_lo);
-
/* Clear set indication */
WREG32(rtr_ctrl_base_addr + DEC_RAZWI_HBW_AR_SET, 0x1);
}
+
+ dev_err_ratelimited(hdev->dev,
+ "RAZWI PSOC unmapped HBW %s error, rtr id %u, address %#llx\n",
+ is_write ? "WR" : "RD", rtr_id, (u64)razwi_hi << 32 | razwi_lo);
+
+ dev_err_ratelimited(hdev->dev,
+ "Initiators: %s\n", gaudi2_get_initiators_name(rtr_id));
}
-static void gaudi2_razwi_unmapped_addr_lbw_printf_info(struct hl_device *hdev,
- u64 rtr_ctrl_base_addr, bool is_write)
+static void gaudi2_razwi_unmapped_addr_lbw_printf_info(struct hl_device *hdev, u32 rtr_id,
+ u64 rtr_ctrl_base_addr, bool is_write)
{
u32 razwi_addr;
if (is_write) {
razwi_addr = RREG32(rtr_ctrl_base_addr + DEC_RAZWI_LBW_AW_ADDR);
- dev_err_ratelimited(hdev->dev,
- "RAZWI PSOC unmapped LBW WR error, ctr_base 0x%llx, captured address 0x%x\n",
- rtr_ctrl_base_addr, razwi_addr);
-
/* Clear set indication */
WREG32(rtr_ctrl_base_addr + DEC_RAZWI_LBW_AW_SET, 0x1);
} else {
razwi_addr = RREG32(rtr_ctrl_base_addr + DEC_RAZWI_LBW_AR_ADDR);
- dev_err_ratelimited(hdev->dev,
- "RAZWI PSOC unmapped LBW AR error, ctr_base 0x%llx, captured address 0x%x\n",
- rtr_ctrl_base_addr, razwi_addr);
-
/* Clear set indication */
WREG32(rtr_ctrl_base_addr + DEC_RAZWI_LBW_AR_SET, 0x1);
}
+
+ dev_err_ratelimited(hdev->dev,
+ "RAZWI PSOC unmapped LBW %s error, rtr id %u, address %#x\n",
+ is_write ? "WR" : "RD", rtr_id, razwi_addr);
+
+ dev_err_ratelimited(hdev->dev,
+ "Initiators: %s\n", gaudi2_get_initiators_name(rtr_id));
}
/* PSOC RAZWI interrupt occurs only when trying to access a bad address */
@@ -7366,21 +7522,16 @@ static void gaudi2_ack_psoc_razwi_event_handler(struct hl_device *hdev)
}
razwi_mask_info = RREG32(mmPSOC_GLOBAL_CONF_RAZWI_MASK_INFO);
-
- xy = (razwi_mask_info & PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_AXUSER_L_MASK)
- >> PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_AXUSER_L_SHIFT;
+ xy = FIELD_GET(PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_AXUSER_L_MASK, razwi_mask_info);
dev_err_ratelimited(hdev->dev,
- "PSOC RAZWI interrupt: Mask %d, WAS_AR %d, WAS_AW %d, AXUSER_L 0x%x AXUSER_H 0x%x\n",
- (razwi_mask_info & PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_MASK_MASK)
- >> PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_MASK_SHIFT,
- (razwi_mask_info & PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_WAS_AR_MASK)
- >> PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_WAS_AR_SHIFT,
- (razwi_mask_info & PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_WAS_AW_MASK)
- >> PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_WAS_AW_SHIFT, xy,
- (razwi_mask_info &
- PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_AXUSER_H_MASK)
- >> PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_AXUSER_H_SHIFT);
+ "PSOC RAZWI interrupt: Mask %d, AR %d, AW %d, AXUSER_L 0x%x AXUSER_H 0x%x\n",
+ FIELD_GET(PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_MASK_MASK, razwi_mask_info),
+ FIELD_GET(PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_WAS_AR_MASK, razwi_mask_info),
+ FIELD_GET(PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_WAS_AW_MASK, razwi_mask_info),
+ xy,
+ FIELD_GET(PSOC_GLOBAL_CONF_RAZWI_MASK_INFO_AXUSER_H_MASK, razwi_mask_info));
+
if (xy == 0) {
dev_err_ratelimited(hdev->dev,
"PSOC RAZWI interrupt: received event from 0 rtr coordinates\n");
@@ -7410,16 +7561,20 @@ static void gaudi2_ack_psoc_razwi_event_handler(struct hl_device *hdev)
lbw_ar_set = RREG32(rtr_ctrl_base_addr + DEC_RAZWI_LBW_AR_SET);
if (hbw_aw_set)
- gaudi2_razwi_unmapped_addr_hbw_printf_info(hdev, rtr_ctrl_base_addr, true);
+ gaudi2_razwi_unmapped_addr_hbw_printf_info(hdev, rtr_id,
+ rtr_ctrl_base_addr, true);
if (hbw_ar_set)
- gaudi2_razwi_unmapped_addr_hbw_printf_info(hdev, rtr_ctrl_base_addr, false);
+ gaudi2_razwi_unmapped_addr_hbw_printf_info(hdev, rtr_id,
+ rtr_ctrl_base_addr, false);
if (lbw_aw_set)
- gaudi2_razwi_unmapped_addr_lbw_printf_info(hdev, rtr_ctrl_base_addr, true);
+ gaudi2_razwi_unmapped_addr_lbw_printf_info(hdev, rtr_id,
+ rtr_ctrl_base_addr, true);
if (lbw_ar_set)
- gaudi2_razwi_unmapped_addr_lbw_printf_info(hdev, rtr_ctrl_base_addr, false);
+ gaudi2_razwi_unmapped_addr_lbw_printf_info(hdev, rtr_id,
+ rtr_ctrl_base_addr, false);
clear:
/* Clear Interrupts only on pldm or if f/w doesn't handle interrupts */
@@ -7811,14 +7966,58 @@ static void gaudi2_handle_dma_core_event(struct hl_device *hdev, u64 intr_cause_
gaudi2_dma_core_interrupts_cause[i]);
}
+static void gaudi2_print_pcie_mstr_rr_mstr_if_razwi_info(struct hl_device *hdev)
+{
+ u32 mstr_if_base_addr = mmPCIE_MSTR_RR_MSTR_IF_RR_SHRD_HBW_BASE, razwi_happened_addr;
+
+ razwi_happened_addr = mstr_if_base_addr + RR_SHRD_HBW_AW_RAZWI_HAPPENED;
+ if (RREG32(razwi_happened_addr)) {
+ gaudi2_razwi_rr_hbw_shared_printf_info(hdev, mstr_if_base_addr, true, "PCIE", true,
+ NULL);
+ WREG32(razwi_happened_addr, 0x1);
+ }
+
+ razwi_happened_addr = mstr_if_base_addr + RR_SHRD_HBW_AR_RAZWI_HAPPENED;
+ if (RREG32(razwi_happened_addr)) {
+ gaudi2_razwi_rr_hbw_shared_printf_info(hdev, mstr_if_base_addr, false, "PCIE", true,
+ NULL);
+ WREG32(razwi_happened_addr, 0x1);
+ }
+
+ razwi_happened_addr = mstr_if_base_addr + RR_SHRD_LBW_AW_RAZWI_HAPPENED;
+ if (RREG32(razwi_happened_addr)) {
+ gaudi2_razwi_rr_lbw_shared_printf_info(hdev, mstr_if_base_addr, true, "PCIE", true,
+ NULL);
+ WREG32(razwi_happened_addr, 0x1);
+ }
+
+ razwi_happened_addr = mstr_if_base_addr + RR_SHRD_LBW_AR_RAZWI_HAPPENED;
+ if (RREG32(razwi_happened_addr)) {
+ gaudi2_razwi_rr_lbw_shared_printf_info(hdev, mstr_if_base_addr, false, "PCIE", true,
+ NULL);
+ WREG32(razwi_happened_addr, 0x1);
+ }
+}
+
static void gaudi2_print_pcie_addr_dec_info(struct hl_device *hdev, u64 intr_cause_data)
{
int i;
- for (i = 0 ; i < GAUDI2_NUM_OF_PCIE_ADDR_DEC_ERR_CAUSE; i++)
- if (intr_cause_data & BIT_ULL(i))
- dev_err_ratelimited(hdev->dev, "PCIE ADDR DEC Error: %s\n",
- gaudi2_pcie_addr_dec_error_cause[i]);
+ for (i = 0 ; i < GAUDI2_NUM_OF_PCIE_ADDR_DEC_ERR_CAUSE ; i++) {
+ if (!(intr_cause_data & BIT_ULL(i)))
+ continue;
+
+ dev_err_ratelimited(hdev->dev, "PCIE ADDR DEC Error: %s\n",
+ gaudi2_pcie_addr_dec_error_cause[i]);
+
+ switch (intr_cause_data & BIT_ULL(i)) {
+ case PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_LBW_ERR_INTR_MASK:
+ break;
+ case PCIE_WRAP_PCIE_IC_SEI_INTR_IND_BAD_ACCESS_INTR_MASK:
+ gaudi2_print_pcie_mstr_rr_mstr_if_razwi_info(hdev);
+ break;
+ }
+ }
}
static void gaudi2_handle_pif_fatal(struct hl_device *hdev, u64 intr_cause_data)
@@ -8158,10 +8357,17 @@ static bool gaudi2_handle_hbm_mc_sei_err(struct hl_device *hdev, u16 event_type,
return true;
}
- dev_err_ratelimited(hdev->dev,
- "System Error Interrupt - HBM(%u) MC(%u) MC_CH(%u) MC_PC(%u). Critical(%u). Error cause: %s\n",
- hbm_id, mc_id, sei_data->hdr.mc_channel, sei_data->hdr.mc_pseudo_channel,
- sei_data->hdr.is_critical, hbm_mc_sei_cause[cause_idx]);
+ if (sei_data->hdr.is_critical)
+ dev_err(hdev->dev,
+ "System Critical Error Interrupt - HBM(%u) MC(%u) MC_CH(%u) MC_PC(%u). Error cause: %s\n",
+ hbm_id, mc_id, sei_data->hdr.mc_channel, sei_data->hdr.mc_pseudo_channel,
+ hbm_mc_sei_cause[cause_idx]);
+
+ else
+ dev_err_ratelimited(hdev->dev,
+ "System Non-Critical Error Interrupt - HBM(%u) MC(%u) MC_CH(%u) MC_PC(%u). Error cause: %s\n",
+ hbm_id, mc_id, sei_data->hdr.mc_channel, sei_data->hdr.mc_pseudo_channel,
+ hbm_mc_sei_cause[cause_idx]);
/* Print error-specific info */
switch (cause_idx) {
@@ -8371,6 +8577,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
struct gaudi2_device *gaudi2 = hdev->asic_specific;
bool reset_required = false, skip_reset = false;
int index, sbte_index;
+ u64 event_mask = 0;
u16 event_type;
ctl = le32_to_cpu(eq_entry->hdr.ctl);
@@ -8392,6 +8599,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
fallthrough;
case GAUDI2_EVENT_ROTATOR0_SERR ... GAUDI2_EVENT_ROTATOR1_DERR:
reset_flags |= HL_DRV_RESET_FW_FATAL_ERR;
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
reset_required = gaudi2_handle_ecc_event(hdev, event_type, &eq_entry->ecc_data);
break;
@@ -8401,21 +8609,25 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
fallthrough;
case GAUDI2_EVENT_NIC0_QM0 ... GAUDI2_EVENT_NIC11_QM1:
gaudi2_handle_qman_err(hdev, event_type);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_ARC_AXI_ERROR_RESPONSE_0:
reset_flags |= HL_DRV_RESET_FW_FATAL_ERR;
gaudi2_handle_arc_farm_sei_err(hdev);
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_CPU_AXI_ERR_RSP:
gaudi2_handle_cpu_sei_err(hdev);
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_PDMA_CH0_AXI_ERR_RSP:
case GAUDI2_EVENT_PDMA_CH1_AXI_ERR_RSP:
reset_flags |= HL_DRV_RESET_FW_FATAL_ERR;
gaudi2_handle_qm_sei_err(hdev, event_type, &eq_entry->razwi_info);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_ROTATOR0_AXI_ERROR_RESPONSE:
@@ -8423,6 +8635,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
index = event_type - GAUDI2_EVENT_ROTATOR0_AXI_ERROR_RESPONSE;
gaudi2_handle_rot_err(hdev, index, &eq_entry->razwi_with_intr_cause);
gaudi2_handle_qm_sei_err(hdev, event_type, NULL);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_TPC0_AXI_ERR_RSP ... GAUDI2_EVENT_TPC24_AXI_ERR_RSP:
@@ -8430,11 +8643,13 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
gaudi2_tpc_ack_interrupts(hdev, index, "AXI_ERR_RSP",
&eq_entry->razwi_with_intr_cause);
gaudi2_handle_qm_sei_err(hdev, event_type, NULL);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_DEC0_AXI_ERR_RSPONSE ... GAUDI2_EVENT_DEC9_AXI_ERR_RSPONSE:
index = event_type - GAUDI2_EVENT_DEC0_AXI_ERR_RSPONSE;
gaudi2_handle_dec_err(hdev, index, "AXI_ERR_RESPONSE", &eq_entry->razwi_info);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_TPC0_KERNEL_ERR:
@@ -8465,6 +8680,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
index = (event_type - GAUDI2_EVENT_TPC0_KERNEL_ERR) /
(GAUDI2_EVENT_TPC1_KERNEL_ERR - GAUDI2_EVENT_TPC0_KERNEL_ERR);
gaudi2_tpc_ack_interrupts(hdev, index, "KRN_ERR", &eq_entry->razwi_with_intr_cause);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_DEC0_SPI:
@@ -8480,6 +8696,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
index = (event_type - GAUDI2_EVENT_DEC0_SPI) /
(GAUDI2_EVENT_DEC1_SPI - GAUDI2_EVENT_DEC0_SPI);
gaudi2_handle_dec_err(hdev, index, "SPI", &eq_entry->razwi_info);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_MME0_CTRL_AXI_ERROR_RESPONSE:
@@ -8492,6 +8709,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
gaudi2_handle_mme_err(hdev, index,
"CTRL_AXI_ERROR_RESPONSE", &eq_entry->razwi_info);
gaudi2_handle_qm_sei_err(hdev, event_type, NULL);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_MME0_QMAN_SW_ERROR:
@@ -8502,6 +8720,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
(GAUDI2_EVENT_MME1_QMAN_SW_ERROR -
GAUDI2_EVENT_MME0_QMAN_SW_ERROR);
gaudi2_handle_mme_err(hdev, index, "QMAN_SW_ERROR", &eq_entry->razwi_info);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_MME0_WAP_SOURCE_RESULT_INVALID:
@@ -8512,22 +8731,27 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
(GAUDI2_EVENT_MME1_WAP_SOURCE_RESULT_INVALID -
GAUDI2_EVENT_MME0_WAP_SOURCE_RESULT_INVALID);
gaudi2_handle_mme_wap_err(hdev, index, &eq_entry->razwi_info);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_KDMA_CH0_AXI_ERR_RSP:
case GAUDI2_EVENT_KDMA0_CORE:
gaudi2_handle_kdma_core_event(hdev,
le64_to_cpu(eq_entry->intr_cause.intr_cause_data));
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_HDMA2_CORE ... GAUDI2_EVENT_PDMA1_CORE:
gaudi2_handle_dma_core_event(hdev,
le64_to_cpu(eq_entry->intr_cause.intr_cause_data));
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_PCIE_ADDR_DEC_ERR:
gaudi2_print_pcie_addr_dec_info(hdev,
le64_to_cpu(eq_entry->intr_cause.intr_cause_data));
+ reset_flags |= HL_DRV_RESET_FW_FATAL_ERR;
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_HMMU0_PAGE_FAULT_OR_WR_PERM ... GAUDI2_EVENT_HMMU12_SECURITY_ERROR:
@@ -8536,25 +8760,30 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
case GAUDI2_EVENT_PMMU_AXI_ERR_RSP_0:
gaudi2_handle_mmu_spi_sei_err(hdev, event_type);
reset_flags |= HL_DRV_RESET_FW_FATAL_ERR;
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_HIF0_FATAL ... GAUDI2_EVENT_HIF12_FATAL:
gaudi2_handle_hif_fatal(hdev, event_type,
le64_to_cpu(eq_entry->intr_cause.intr_cause_data));
reset_flags |= HL_DRV_RESET_FW_FATAL_ERR;
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_PMMU_FATAL_0:
gaudi2_handle_pif_fatal(hdev,
le64_to_cpu(eq_entry->intr_cause.intr_cause_data));
reset_flags |= HL_DRV_RESET_FW_FATAL_ERR;
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_PSOC63_RAZWI_OR_PID_MIN_MAX_INTERRUPT:
gaudi2_ack_psoc_razwi_event_handler(hdev);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_HBM0_MC0_SEI_SEVERE ... GAUDI2_EVENT_HBM5_MC1_SEI_NON_SEVERE:
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
if (gaudi2_handle_hbm_mc_sei_err(hdev, event_type, &eq_entry->sei_data)) {
reset_flags |= HL_DRV_RESET_FW_FATAL_ERR;
reset_required = true;
@@ -8563,25 +8792,31 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
case GAUDI2_EVENT_HBM_CATTRIP_0 ... GAUDI2_EVENT_HBM_CATTRIP_5:
gaudi2_handle_hbm_cattrip(hdev, le64_to_cpu(eq_entry->intr_cause.intr_cause_data));
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_HBM0_MC0_SPI ... GAUDI2_EVENT_HBM5_MC1_SPI:
gaudi2_handle_hbm_mc_spi(hdev, le64_to_cpu(eq_entry->intr_cause.intr_cause_data));
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_PCIE_DRAIN_COMPLETE:
gaudi2_handle_pcie_drain(hdev, &eq_entry->pcie_drain_ind_data);
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_PSOC59_RPM_ERROR_OR_DRAIN:
gaudi2_handle_psoc_drain(hdev, le64_to_cpu(eq_entry->intr_cause.intr_cause_data));
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_CPU_AXI_ECC:
reset_flags |= HL_DRV_RESET_FW_FATAL_ERR;
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_CPU_L2_RAM_ECC:
reset_flags |= HL_DRV_RESET_FW_FATAL_ERR;
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_MME0_SBTE0_AXI_ERR_RSP ... GAUDI2_EVENT_MME0_SBTE4_AXI_ERR_RSP:
case GAUDI2_EVENT_MME1_SBTE0_AXI_ERR_RSP ... GAUDI2_EVENT_MME1_SBTE4_AXI_ERR_RSP:
@@ -8595,17 +8830,24 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
GAUDI2_EVENT_MME0_SBTE0_AXI_ERR_RSP);
gaudi2_handle_mme_sbte_err(hdev, index, sbte_index,
le64_to_cpu(eq_entry->intr_cause.intr_cause_data));
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_VM0_ALARM_A ... GAUDI2_EVENT_VM3_ALARM_B:
reset_flags |= HL_DRV_RESET_FW_FATAL_ERR;
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_PSOC_AXI_ERR_RSP:
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
+ break;
case GAUDI2_EVENT_PSOC_PRSTN_FALL:
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_PCIE_APB_TIMEOUT:
reset_flags |= HL_DRV_RESET_FW_FATAL_ERR;
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_PCIE_FATAL_ERR:
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_TPC0_BMON_SPMU:
case GAUDI2_EVENT_TPC1_BMON_SPMU:
@@ -8657,6 +8899,7 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
case GAUDI2_EVENT_DEC8_BMON_SPMU:
case GAUDI2_EVENT_DEC9_BMON_SPMU:
case GAUDI2_EVENT_ROTATOR0_BMON_SPMU ... GAUDI2_EVENT_SM3_BMON_SPMU:
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_CPU_FIX_POWER_ENV_S:
@@ -8664,43 +8907,53 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
case GAUDI2_EVENT_CPU_FIX_THERMAL_ENV_S:
case GAUDI2_EVENT_CPU_FIX_THERMAL_ENV_E:
gaudi2_print_clk_change_info(hdev, event_type);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_CPU_PKT_QUEUE_OUT_SYNC:
gaudi2_print_out_of_sync_info(hdev, &eq_entry->pkt_sync_err);
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_PCIE_FLR_REQUESTED:
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
/* Do nothing- FW will handle it */
break;
case GAUDI2_EVENT_PCIE_P2P_MSIX:
gaudi2_handle_pcie_p2p_msix(hdev);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_SM0_AXI_ERROR_RESPONSE ... GAUDI2_EVENT_SM3_AXI_ERROR_RESPONSE:
index = event_type - GAUDI2_EVENT_SM0_AXI_ERROR_RESPONSE;
skip_reset = !gaudi2_handle_sm_err(hdev, index);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
case GAUDI2_EVENT_PSOC_MME_PLL_LOCK_ERR ... GAUDI2_EVENT_DCORE2_HBM_PLL_LOCK_ERR:
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_CPU_CPLD_SHUTDOWN_CAUSE:
dev_info(hdev->dev, "CPLD shutdown cause, reset reason: 0x%llx\n",
le64_to_cpu(eq_entry->data[0]));
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_CPU_CPLD_SHUTDOWN_EVENT:
dev_err(hdev->dev, "CPLD shutdown event, reset reason: 0x%llx\n",
le64_to_cpu(eq_entry->data[0]));
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_CPU_PKT_SANITY_FAILED:
gaudi2_print_cpu_pkt_failure_info(hdev, &eq_entry->pkt_sync_err);
+ event_mask |= HL_NOTIFIER_EVENT_GENERAL_HW_ERR;
break;
case GAUDI2_EVENT_ARC_DCCM_FULL:
hl_arc_event_handle(hdev, &eq_entry->arc_data);
+ event_mask |= HL_NOTIFIER_EVENT_USER_ENGINE_ERR;
break;
default:
@@ -8716,15 +8969,22 @@ static void gaudi2_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_ent
if (!gaudi2_irq_map_table[event_type].msg)
hl_fw_unmask_irq(hdev, event_type);
+ if (event_mask)
+ hl_notifier_event_send_all(hdev, event_mask);
+
return;
reset_device:
if (hdev->hard_reset_on_fw_events) {
hl_device_reset(hdev, reset_flags);
+ event_mask |= HL_NOTIFIER_EVENT_DEVICE_RESET;
} else {
if (!gaudi2_irq_map_table[event_type].msg)
hl_fw_unmask_irq(hdev, event_type);
}
+
+ if (event_mask)
+ hl_notifier_event_send_all(hdev, event_mask);
}
static int gaudi2_memset_device_memory(struct hl_device *hdev, u64 addr, u64 size, u64 val)
@@ -9090,19 +9350,17 @@ static int gaudi2_debugfs_read_dma(struct hl_device *hdev, u64 addr, u32 size, v
}
/* Create mapping on asic side */
- mutex_lock(&ctx->mmu_lock);
+ mutex_lock(&hdev->mmu_lock);
rc = hl_mmu_map_contiguous(ctx, reserved_va_base, host_mem_dma_addr, SZ_2M);
hl_mmu_invalidate_cache_range(hdev, false,
MMU_OP_USERPTR | MMU_OP_SKIP_LOW_CACHE_INV,
ctx->asid, reserved_va_base, SZ_2M);
- mutex_unlock(&ctx->mmu_lock);
+ mutex_unlock(&hdev->mmu_lock);
if (rc) {
dev_err(hdev->dev, "Failed to create mapping on asic mmu\n");
goto unreserve_va;
}
- hdev->asic_funcs->kdma_lock(hdev, 0);
-
/* Enable MMU on KDMA */
gaudi2_kdma_set_mmbp_asid(hdev, false, ctx->asid);
@@ -9130,13 +9388,11 @@ static int gaudi2_debugfs_read_dma(struct hl_device *hdev, u64 addr, u32 size, v
gaudi2_kdma_set_mmbp_asid(hdev, true, HL_KERNEL_ASID_ID);
- hdev->asic_funcs->kdma_unlock(hdev, 0);
-
- mutex_lock(&ctx->mmu_lock);
+ mutex_lock(&hdev->mmu_lock);
hl_mmu_unmap_contiguous(ctx, reserved_va_base, SZ_2M);
hl_mmu_invalidate_cache_range(hdev, false, MMU_OP_USERPTR,
ctx->asid, reserved_va_base, SZ_2M);
- mutex_unlock(&ctx->mmu_lock);
+ mutex_unlock(&hdev->mmu_lock);
unreserve_va:
hl_unreserve_va_block(hdev, ctx, reserved_va_base, SZ_2M);
free_data_buffer:
@@ -9189,11 +9445,11 @@ static int gaudi2_internal_cb_pool_init(struct hl_device *hdev, struct hl_ctx *c
goto destroy_internal_cb_pool;
}
- mutex_lock(&ctx->mmu_lock);
+ mutex_lock(&hdev->mmu_lock);
rc = hl_mmu_map_contiguous(ctx, hdev->internal_cb_va_base, hdev->internal_cb_pool_dma_addr,
HOST_SPACE_INTERNAL_CB_SZ);
hl_mmu_invalidate_cache(hdev, false, MMU_OP_USERPTR);
- mutex_unlock(&ctx->mmu_lock);
+ mutex_unlock(&hdev->mmu_lock);
if (rc)
goto unreserve_internal_cb_pool;
@@ -9218,11 +9474,11 @@ static void gaudi2_internal_cb_pool_fini(struct hl_device *hdev, struct hl_ctx *
if (!(gaudi2->hw_cap_initialized & HW_CAP_PMMU))
return;
- mutex_lock(&ctx->mmu_lock);
+ mutex_lock(&hdev->mmu_lock);
hl_mmu_unmap_contiguous(ctx, hdev->internal_cb_va_base, HOST_SPACE_INTERNAL_CB_SZ);
hl_unreserve_va_block(hdev, ctx, hdev->internal_cb_va_base, HOST_SPACE_INTERNAL_CB_SZ);
hl_mmu_invalidate_cache(hdev, true, MMU_OP_USERPTR);
- mutex_unlock(&ctx->mmu_lock);
+ mutex_unlock(&hdev->mmu_lock);
gen_pool_destroy(hdev->internal_cb_pool);
@@ -9336,7 +9592,7 @@ static u32 gaudi2_get_queue_id_for_cq(struct hl_device *hdev, u32 cq_idx)
static u32 gaudi2_gen_signal_cb(struct hl_device *hdev, void *data, u16 sob_id, u32 size, bool eb)
{
- struct hl_cb *cb = (struct hl_cb *) data;
+ struct hl_cb *cb = data;
struct packet_msg_short *pkt;
u32 value, ctl, pkt_size = sizeof(*pkt);
@@ -9429,7 +9685,7 @@ static u32 gaudi2_add_fence_pkt(struct packet_fence *pkt)
static u32 gaudi2_gen_wait_cb(struct hl_device *hdev, struct hl_gen_wait_properties *prop)
{
- struct hl_cb *cb = (struct hl_cb *) prop->data;
+ struct hl_cb *cb = prop->data;
void *buf = (void *) (uintptr_t) (cb->kernel_address);
u64 monitor_base, fence_addr = 0;
@@ -9481,7 +9737,7 @@ static u32 gaudi2_gen_wait_cb(struct hl_device *hdev, struct hl_gen_wait_propert
static void gaudi2_reset_sob(struct hl_device *hdev, void *data)
{
- struct hl_hw_sob *hw_sob = (struct hl_hw_sob *) data;
+ struct hl_hw_sob *hw_sob = data;
dev_dbg(hdev->dev, "reset SOB, q_idx: %d, sob_id: %d\n", hw_sob->q_idx, hw_sob->sob_id);
@@ -9724,7 +9980,7 @@ static int gaudi2_get_mmu_base(struct hl_device *hdev, u64 mmu_id, u32 *mmu_base
static void gaudi2_ack_mmu_error(struct hl_device *hdev, u64 mmu_id)
{
- bool is_pmmu = (mmu_id == HW_CAP_PMMU ? true : false);
+ bool is_pmmu = (mmu_id == HW_CAP_PMMU);
struct gaudi2_device *gaudi2 = hdev->asic_specific;
u32 mmu_base;
@@ -9881,6 +10137,17 @@ static int gaudi2_get_monitor_dump(struct hl_device *hdev, void *data)
return -EOPNOTSUPP;
}
+int gaudi2_send_device_activity(struct hl_device *hdev, bool open)
+{
+ struct gaudi2_device *gaudi2 = hdev->asic_specific;
+
+ if (!(gaudi2->hw_cap_initialized & HW_CAP_CPU_Q) || hdev->fw_major_version < 37)
+ return 0;
+
+ /* TODO: add check for FW version using minor ver once it's known */
+ return hl_fw_send_device_activity(hdev, open);
+}
+
static const struct hl_asic_funcs gaudi2_funcs = {
.early_init = gaudi2_early_init,
.early_fini = gaudi2_early_fini,
@@ -9927,11 +10194,9 @@ static const struct hl_asic_funcs gaudi2_funcs = {
.send_heartbeat = gaudi2_send_heartbeat,
.debug_coresight = gaudi2_debug_coresight,
.is_device_idle = gaudi2_is_device_idle,
- .non_hard_reset_late_init = gaudi2_non_hard_reset_late_init,
+ .compute_reset_late_init = gaudi2_compute_reset_late_init,
.hw_queues_lock = gaudi2_hw_queues_lock,
.hw_queues_unlock = gaudi2_hw_queues_unlock,
- .kdma_lock = gaudi2_kdma_lock,
- .kdma_unlock = gaudi2_kdma_unlock,
.get_pci_id = gaudi2_get_pci_id,
.get_eeprom_data = gaudi2_get_eeprom_data,
.get_monitor_dump = gaudi2_get_monitor_dump,
@@ -9978,6 +10243,8 @@ static const struct hl_asic_funcs gaudi2_funcs = {
.mmu_get_real_page_size = gaudi2_mmu_get_real_page_size,
.access_dev_mem = hl_access_dev_mem,
.set_dram_bar_base = gaudi2_set_hbm_bar_base,
+ .set_engine_cores = gaudi2_set_engine_cores,
+ .send_device_activity = gaudi2_send_device_activity,
};
void gaudi2_set_asic_funcs(struct hl_device *hdev)
diff --git a/drivers/misc/habanalabs/gaudi2/gaudi2P.h b/drivers/misc/habanalabs/gaudi2/gaudi2P.h
index e4bc4009f05b..a99c348bbf39 100644
--- a/drivers/misc/habanalabs/gaudi2/gaudi2P.h
+++ b/drivers/misc/habanalabs/gaudi2/gaudi2P.h
@@ -15,7 +15,6 @@
#include "../include/gaudi2/gaudi2_packets.h"
#include "../include/gaudi2/gaudi2_fw_if.h"
#include "../include/gaudi2/gaudi2_async_events.h"
-#include "../include/gaudi2/gaudi2_async_virt_events.h"
#define GAUDI2_LINUX_FW_FILE "habanalabs/gaudi2/gaudi2-fit.itb"
#define GAUDI2_BOOT_FIT_FILE "habanalabs/gaudi2/gaudi2-boot-fit.itb"
@@ -140,9 +139,6 @@
#define VA_HOST_SPACE_HPAGE_START 0xFFF0800000000000ull
#define VA_HOST_SPACE_HPAGE_END 0xFFF1000000000000ull /* 140TB */
-#define VA_HOST_SPACE_USER_MAPPED_CB_START 0xFFF1000000000000ull
-#define VA_HOST_SPACE_USER_MAPPED_CB_END 0xFFF1000100000000ull /* 4GB */
-
/* 140TB */
#define VA_HOST_SPACE_PAGE_SIZE (VA_HOST_SPACE_PAGE_END - VA_HOST_SPACE_PAGE_START)
@@ -458,7 +454,6 @@ struct dup_block_ctx {
* the user can map.
* @lfsr_rand_seeds: array of MME ACC random seeds to set.
* @hw_queues_lock: protects the H/W queues from concurrent access.
- * @kdma_lock: protects the KDMA engine from concurrent access.
* @scratchpad_kernel_address: general purpose PAGE_SIZE contiguous memory,
* this memory region should be write-only.
* currently used for HBW QMAN writes which is
@@ -510,9 +505,6 @@ struct dup_block_ctx {
* @flush_db_fifo: flag to force flush DB FIFO after a write.
* @hbm_cfg: HBM subsystem settings
* @hw_queues_lock_mutex: used by simulator instead of hw_queues_lock.
- * @kdma_lock_mutex: used by simulator instead of kdma_lock.
- * @use_deprecated_event_mappings: use old event mappings which are about to be
- * deprecated
*/
struct gaudi2_device {
int (*cpucp_info_get)(struct hl_device *hdev);
@@ -521,7 +513,6 @@ struct gaudi2_device {
int lfsr_rand_seeds[MME_NUM_OF_LFSR_SEEDS];
spinlock_t hw_queues_lock;
- spinlock_t kdma_lock;
void *scratchpad_kernel_address;
dma_addr_t scratchpad_bus_address;
@@ -562,5 +553,6 @@ void gaudi2_pb_print_security_errors(struct hl_device *hdev, u32 block_addr, u32
u32 offended_addr);
int gaudi2_init_security(struct hl_device *hdev);
void gaudi2_ack_protection_bits_errors(struct hl_device *hdev);
+int gaudi2_send_device_activity(struct hl_device *hdev, bool open);
#endif /* GAUDI2P_H_ */
diff --git a/drivers/misc/habanalabs/gaudi2/gaudi2_masks.h b/drivers/misc/habanalabs/gaudi2/gaudi2_masks.h
index eed16d642a5a..e9ac87828221 100644
--- a/drivers/misc/habanalabs/gaudi2/gaudi2_masks.h
+++ b/drivers/misc/habanalabs/gaudi2/gaudi2_masks.h
@@ -51,12 +51,18 @@
(0x1F << PDMA0_QM_GLBL_CFG0_CP_EN_SHIFT) | \
(0x1 << PDMA0_QM_GLBL_CFG0_ARC_CQF_EN_SHIFT))
-#define PDMA1_QMAN_ENABLE \
+#define PDMA0_QMAN_ENABLE \
((0x3 << PDMA0_QM_GLBL_CFG0_PQF_EN_SHIFT) | \
(0x1F << PDMA0_QM_GLBL_CFG0_CQF_EN_SHIFT) | \
(0x1F << PDMA0_QM_GLBL_CFG0_CP_EN_SHIFT) | \
(0x1 << PDMA0_QM_GLBL_CFG0_ARC_CQF_EN_SHIFT))
+#define PDMA1_QMAN_ENABLE \
+ ((0x1 << PDMA0_QM_GLBL_CFG0_PQF_EN_SHIFT) | \
+ (0x1F << PDMA0_QM_GLBL_CFG0_CQF_EN_SHIFT) | \
+ (0x1F << PDMA0_QM_GLBL_CFG0_CP_EN_SHIFT) | \
+ (0x1 << PDMA0_QM_GLBL_CFG0_ARC_CQF_EN_SHIFT))
+
/* QM_IDLE_MASK is valid for all engines QM idle check */
#define QM_IDLE_MASK (DCORE0_EDMA0_QM_GLBL_STS0_PQF_IDLE_MASK | \
DCORE0_EDMA0_QM_GLBL_STS0_CQF_IDLE_MASK | \
@@ -138,4 +144,17 @@
#define DCORE0_SYNC_MNGR_OBJS_SOB_OBJ_SIGN_SHIFT 15
#define DCORE0_SYNC_MNGR_OBJS_SOB_OBJ_SIGN_MASK 0x8000
+#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_ERR_INTR_SHIFT 0
+#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_ERR_INTR_MASK 0x1
+#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_LBW_ERR_INTR_SHIFT 1
+#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_LBW_ERR_INTR_MASK 0x2
+#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_BAD_ACCESS_INTR_SHIFT 2
+#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_BAD_ACCESS_INTR_MASK 0x4
+#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_ERR_INTR_MASK_SHIFT 3
+#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_ERR_INTR_MASK_MASK 0x8
+#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_LBW_ERR_INTR_MASK_SHIFT 4
+#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_AXI_LBW_ERR_INTR_MASK_MASK 0x10
+#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_BAD_ACCESS_INTR_MASK_SHIFT 5
+#define PCIE_WRAP_PCIE_IC_SEI_INTR_IND_BAD_ACCESS_INTR_MASK_MASK 0x20
+
#endif /* GAUDI2_MASKS_H_ */
diff --git a/drivers/misc/habanalabs/gaudi2/gaudi2_security.c b/drivers/misc/habanalabs/gaudi2/gaudi2_security.c
index 89a06ff5ba34..c6906fb14229 100644
--- a/drivers/misc/habanalabs/gaudi2/gaudi2_security.c
+++ b/drivers/misc/habanalabs/gaudi2/gaudi2_security.c
@@ -2559,6 +2559,10 @@ static const u32 gaudi2_pb_pcie[] = {
mmPCIE_WRAP_BASE,
};
+static const u32 gaudi2_pb_pcie_unsecured_regs[] = {
+ mmPCIE_WRAP_SPECIAL_GLBL_SPARE_0,
+};
+
static const u32 gaudi2_pb_thermal_sensor0[] = {
mmDCORE0_XFT_BASE,
mmDCORE0_TSTDVS_BASE,
@@ -2583,9 +2587,9 @@ struct gaudi2_tpc_pb_data {
};
static void gaudi2_config_tpcs_glbl_sec(struct hl_device *hdev, int dcore, int inst, u32 offset,
- void *data)
+ struct iterate_module_ctx *ctx)
{
- struct gaudi2_tpc_pb_data *pb_data = (struct gaudi2_tpc_pb_data *)data;
+ struct gaudi2_tpc_pb_data *pb_data = ctx->data;
hl_config_glbl_sec(hdev, gaudi2_pb_dcr0_tpc0, pb_data->glbl_sec,
offset, pb_data->block_array_size);
@@ -2660,15 +2664,14 @@ static int gaudi2_init_pb_tpc(struct hl_device *hdev)
struct gaudi2_tpc_arc_pb_data {
u32 unsecured_regs_arr_size;
u32 arc_regs_arr_size;
- int rc;
};
static void gaudi2_config_tpcs_pb_ranges(struct hl_device *hdev, int dcore, int inst, u32 offset,
- void *data)
+ struct iterate_module_ctx *ctx)
{
- struct gaudi2_tpc_arc_pb_data *pb_data = (struct gaudi2_tpc_arc_pb_data *)data;
+ struct gaudi2_tpc_arc_pb_data *pb_data = ctx->data;
- pb_data->rc |= hl_init_pb_ranges(hdev, HL_PB_SHARED, HL_PB_NA, 1,
+ ctx->rc = hl_init_pb_ranges(hdev, HL_PB_SHARED, HL_PB_NA, 1,
offset, gaudi2_pb_dcr0_tpc0_arc,
pb_data->arc_regs_arr_size,
gaudi2_pb_dcr0_tpc0_arc_unsecured_regs,
@@ -2683,12 +2686,12 @@ static int gaudi2_init_pb_tpc_arc(struct hl_device *hdev)
tpc_arc_pb_data.arc_regs_arr_size = ARRAY_SIZE(gaudi2_pb_dcr0_tpc0_arc);
tpc_arc_pb_data.unsecured_regs_arr_size =
ARRAY_SIZE(gaudi2_pb_dcr0_tpc0_arc_unsecured_regs);
- tpc_arc_pb_data.rc = 0;
+
tpc_iter.fn = &gaudi2_config_tpcs_pb_ranges;
tpc_iter.data = &tpc_arc_pb_data;
gaudi2_iterate_tpcs(hdev, &tpc_iter);
- return tpc_arc_pb_data.rc;
+ return tpc_iter.rc;
}
static int gaudi2_init_pb_sm_objs(struct hl_device *hdev)
@@ -3419,7 +3422,8 @@ static int gaudi2_init_protection_bits(struct hl_device *hdev)
rc |= hl_init_pb(hdev, HL_PB_SHARED, HL_PB_NA,
HL_PB_SINGLE_INSTANCE, HL_PB_NA,
gaudi2_pb_pcie, ARRAY_SIZE(gaudi2_pb_pcie),
- NULL, HL_PB_NA);
+ gaudi2_pb_pcie_unsecured_regs,
+ ARRAY_SIZE(gaudi2_pb_pcie_unsecured_regs));
/* Thermal Sensor.
* Skip when security is enabled in F/W, because the blocks are protected by privileged RR.
@@ -3547,9 +3551,9 @@ struct gaudi2_ack_pb_tpc_data {
};
static void gaudi2_ack_pb_tpc_config(struct hl_device *hdev, int dcore, int inst, u32 offset,
- void *data)
+ struct iterate_module_ctx *ctx)
{
- struct gaudi2_ack_pb_tpc_data *pb_data = (struct gaudi2_ack_pb_tpc_data *)data;
+ struct gaudi2_ack_pb_tpc_data *pb_data = ctx->data;
hl_ack_pb_single_dcore(hdev, offset, HL_PB_SINGLE_INSTANCE, HL_PB_NA,
gaudi2_pb_dcr0_tpc0, pb_data->tpc_regs_array_size);
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index db4487c33582..5ef9e3ca97a6 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -916,26 +916,11 @@ int goya_late_init(struct hl_device *hdev)
*/
void goya_late_fini(struct hl_device *hdev)
{
- const struct hwmon_channel_info **channel_info_arr;
struct goya_device *goya = hdev->asic_specific;
- int i = 0;
cancel_delayed_work_sync(&goya->goya_work->work_freq);
- if (!hdev->hl_chip_info->info)
- return;
-
- channel_info_arr = hdev->hl_chip_info->info;
-
- while (channel_info_arr[i]) {
- kfree(channel_info_arr[i]->config);
- kfree(channel_info_arr[i]);
- i++;
- }
-
- kfree(channel_info_arr);
-
- hdev->hl_chip_info->info = NULL;
+ hl_hwmon_release_resources(hdev);
}
static void goya_set_pci_memory_regions(struct hl_device *hdev)
@@ -1040,6 +1025,7 @@ static int goya_sw_init(struct hl_device *hdev)
hdev->asic_prop.supports_compute_reset = true;
hdev->asic_prop.allow_inference_soft_reset = true;
hdev->supports_wait_for_multi_cs = false;
+ hdev->supports_ctx_switch = true;
hdev->asic_funcs->set_pci_memory_regions(hdev);
@@ -4559,7 +4545,7 @@ static int goya_unmask_irq_arr(struct hl_device *hdev, u32 *irq_arr,
return rc;
}
-static int goya_non_hard_reset_late_init(struct hl_device *hdev)
+static int goya_compute_reset_late_init(struct hl_device *hdev)
{
/*
* Unmask all IRQs since some could have been received
@@ -5137,8 +5123,8 @@ int goya_cpucp_info_get(struct hl_device *hdev)
return 0;
}
-static bool goya_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
- u8 mask_len, struct seq_file *s)
+static bool goya_is_device_idle(struct hl_device *hdev, u64 *mask_arr, u8 mask_len,
+ struct engines_data *e)
{
const char *fmt = "%-5d%-9s%#-14x%#-16x%#x\n";
const char *dma_fmt = "%-5d%-9s%#-14x%#x\n";
@@ -5149,9 +5135,9 @@ static bool goya_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
u64 offset;
int i;
- if (s)
- seq_puts(s, "\nDMA is_idle QM_GLBL_STS0 DMA_CORE_STS0\n"
- "--- ------- ------------ -------------\n");
+ if (e)
+ hl_engine_data_sprintf(e, "\nDMA is_idle QM_GLBL_STS0 DMA_CORE_STS0\n"
+ "--- ------- ------------ -------------\n");
offset = mmDMA_QM_1_GLBL_STS0 - mmDMA_QM_0_GLBL_STS0;
@@ -5164,13 +5150,13 @@ static bool goya_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
if (mask && !is_eng_idle)
set_bit(GOYA_ENGINE_ID_DMA_0 + i, mask);
- if (s)
- seq_printf(s, dma_fmt, i, is_eng_idle ? "Y" : "N",
+ if (e)
+ hl_engine_data_sprintf(e, dma_fmt, i, is_eng_idle ? "Y" : "N",
qm_glbl_sts0, dma_core_sts0);
}
- if (s)
- seq_puts(s,
+ if (e)
+ hl_engine_data_sprintf(e,
"\nTPC is_idle QM_GLBL_STS0 CMDQ_GLBL_STS0 CFG_STATUS\n"
"--- ------- ------------ -------------- ----------\n");
@@ -5187,13 +5173,13 @@ static bool goya_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
if (mask && !is_eng_idle)
set_bit(GOYA_ENGINE_ID_TPC_0 + i, mask);
- if (s)
- seq_printf(s, fmt, i, is_eng_idle ? "Y" : "N",
+ if (e)
+ hl_engine_data_sprintf(e, fmt, i, is_eng_idle ? "Y" : "N",
qm_glbl_sts0, cmdq_glbl_sts0, tpc_cfg_sts);
}
- if (s)
- seq_puts(s,
+ if (e)
+ hl_engine_data_sprintf(e,
"\nMME is_idle QM_GLBL_STS0 CMDQ_GLBL_STS0 ARCH_STATUS\n"
"--- ------- ------------ -------------- -----------\n");
@@ -5207,10 +5193,10 @@ static bool goya_is_device_idle(struct hl_device *hdev, u64 *mask_arr,
if (mask && !is_eng_idle)
set_bit(GOYA_ENGINE_ID_MME_0, mask);
- if (s) {
- seq_printf(s, fmt, 0, is_eng_idle ? "Y" : "N", qm_glbl_sts0,
+ if (e) {
+ hl_engine_data_sprintf(e, fmt, 0, is_eng_idle ? "Y" : "N", qm_glbl_sts0,
cmdq_glbl_sts0, mme_arch_sts);
- seq_puts(s, "\n");
+ hl_engine_data_sprintf(e, "\n");
}
return is_idle;
@@ -5434,6 +5420,11 @@ static int goya_scrub_device_dram(struct hl_device *hdev, u64 val)
return -EOPNOTSUPP;
}
+static int goya_send_device_activity(struct hl_device *hdev, bool open)
+{
+ return 0;
+}
+
static const struct hl_asic_funcs goya_funcs = {
.early_init = goya_early_init,
.early_fini = goya_early_fini,
@@ -5478,11 +5469,9 @@ static const struct hl_asic_funcs goya_funcs = {
.send_heartbeat = goya_send_heartbeat,
.debug_coresight = goya_debug_coresight,
.is_device_idle = goya_is_device_idle,
- .non_hard_reset_late_init = goya_non_hard_reset_late_init,
+ .compute_reset_late_init = goya_compute_reset_late_init,
.hw_queues_lock = goya_hw_queues_lock,
.hw_queues_unlock = goya_hw_queues_unlock,
- .kdma_lock = NULL,
- .kdma_unlock = NULL,
.get_pci_id = goya_get_pci_id,
.get_eeprom_data = goya_get_eeprom_data,
.get_monitor_dump = goya_get_monitor_dump,
@@ -5528,6 +5517,7 @@ static const struct hl_asic_funcs goya_funcs = {
.mmu_get_real_page_size = hl_mmu_get_real_page_size,
.access_dev_mem = hl_access_dev_mem,
.set_dram_bar_base = goya_set_ddr_bar_base,
+ .send_device_activity = goya_send_device_activity,
};
/*
diff --git a/drivers/misc/habanalabs/include/common/cpucp_if.h b/drivers/misc/habanalabs/include/common/cpucp_if.h
index abf40e1c4965..baa5aa43b6f4 100644
--- a/drivers/misc/habanalabs/include/common/cpucp_if.h
+++ b/drivers/misc/habanalabs/include/common/cpucp_if.h
@@ -629,6 +629,12 @@ enum pq_init_status {
* CPUCP_PACKET_ENGINE_CORE_ASID_SET -
* Packet to perform engine core ASID configuration
*
+ * CPUCP_PACKET_SEC_ATTEST_GET -
+ * Get the attestaion data that is collected during various stages of the
+ * boot sequence. the attestation data is also hashed with some unique
+ * number (nonce) provided by the host to prevent replay attacks.
+ * public key and certificate also provided as part of the FW response.
+ *
* CPUCP_PACKET_MONITOR_DUMP_GET -
* Get monitors registers dump from the CpuCP kernel.
* The CPU will put the registers dump in the a buffer allocated by the driver
@@ -636,6 +642,10 @@ enum pq_init_status {
* passes the max size it allows the CpuCP to write to the structure, to prevent
* data corruption in case of mismatched driver/FW versions.
* Relevant only to Gaudi.
+ *
+ * CPUCP_PACKET_ACTIVE_STATUS_SET -
+ * LKD sends FW indication whether device is free or in use, this indication is reported
+ * also to the BMC.
*/
enum cpucp_packet_id {
@@ -687,10 +697,17 @@ enum cpucp_packet_id {
CPUCP_PACKET_RESERVED, /* not used */
CPUCP_PACKET_ENGINE_CORE_ASID_SET, /* internal */
CPUCP_PACKET_RESERVED2, /* not used */
+ CPUCP_PACKET_SEC_ATTEST_GET, /* internal */
CPUCP_PACKET_RESERVED3, /* not used */
CPUCP_PACKET_RESERVED4, /* not used */
- CPUCP_PACKET_RESERVED5, /* not used */
CPUCP_PACKET_MONITOR_DUMP_GET, /* debugfs */
+ CPUCP_PACKET_RESERVED5, /* not used */
+ CPUCP_PACKET_RESERVED6, /* not used */
+ CPUCP_PACKET_RESERVED7, /* not used */
+ CPUCP_PACKET_RESERVED8, /* not used */
+ CPUCP_PACKET_RESERVED9, /* not used */
+ CPUCP_PACKET_ACTIVE_STATUS_SET, /* internal */
+ CPUCP_PACKET_ID_MAX /* must be last */
};
#define CPUCP_PACKET_FENCE_VAL 0xFE8CE7A5
@@ -783,6 +800,9 @@ struct cpucp_packet {
* result cannot be used to hold general purpose data.
*/
__le32 status_mask;
+
+ /* random, used once number, for security packets */
+ __le32 nonce;
};
/* For NIC requests */
@@ -813,10 +833,25 @@ enum cpucp_led_index {
CPUCP_LED2_INDEX
};
+/*
+ * enum cpucp_packet_rc - Error return code
+ * @cpucp_packet_success -> in case of success.
+ * @cpucp_packet_invalid -> this is to support Goya and Gaudi platform.
+ * @cpucp_packet_fault -> in case of processing error like failing to
+ * get device binding or semaphore etc.
+ * @cpucp_packet_invalid_pkt -> when cpucp packet is un-supported. This is
+ * supported Greco onwards.
+ * @cpucp_packet_invalid_params -> when checking parameter like length of buffer
+ * or attribute value etc. Supported Greco onwards.
+ * @cpucp_packet_rc_max -> It indicates size of enum so should be at last.
+ */
enum cpucp_packet_rc {
cpucp_packet_success,
cpucp_packet_invalid,
- cpucp_packet_fault
+ cpucp_packet_fault,
+ cpucp_packet_invalid_pkt,
+ cpucp_packet_invalid_params,
+ cpucp_packet_rc_max
};
/*
@@ -1193,6 +1228,70 @@ enum cpu_reset_status {
CPU_RST_STATUS_SOFT_RST_DONE = 1,
};
+#define SEC_PCR_DATA_BUF_SZ 256
+#define SEC_PCR_QUOTE_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */
+#define SEC_SIGNATURE_BUF_SZ 255 /* (256 - 1) 1 byte used for size */
+#define SEC_PUB_DATA_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */
+#define SEC_CERTIFICATE_BUF_SZ 2046 /* (2048 - 2) 2 bytes used for size */
+
+/*
+ * struct cpucp_sec_attest_info - attestation report of the boot
+ * @pcr_data: raw values of the PCR registers
+ * @pcr_num_reg: number of PCR registers in the pcr_data array
+ * @pcr_reg_len: length of each PCR register in the pcr_data array (bytes)
+ * @nonce: number only used once. random number provided by host. this also
+ * passed to the quote command as a qualifying data.
+ * @pcr_quote_len: length of the attestation quote data (bytes)
+ * @pcr_quote: attestation report data structure
+ * @quote_sig_len: length of the attestation report signature (bytes)
+ * @quote_sig: signature structure of the attestation report
+ * @pub_data_len: length of the public data (bytes)
+ * @public_data: public key for the signed attestation
+ * (outPublic + name + qualifiedName)
+ * @certificate_len: length of the certificate (bytes)
+ * @certificate: certificate for the attestation signing key
+ */
+struct cpucp_sec_attest_info {
+ __u8 pcr_data[SEC_PCR_DATA_BUF_SZ];
+ __u8 pcr_num_reg;
+ __u8 pcr_reg_len;
+ __le16 pad0;
+ __le32 nonce;
+ __le16 pcr_quote_len;
+ __u8 pcr_quote[SEC_PCR_QUOTE_BUF_SZ];
+ __u8 quote_sig_len;
+ __u8 quote_sig[SEC_SIGNATURE_BUF_SZ];
+ __le16 pub_data_len;
+ __u8 public_data[SEC_PUB_DATA_BUF_SZ];
+ __le16 certificate_len;
+ __u8 certificate[SEC_CERTIFICATE_BUF_SZ];
+};
+
+/*
+ * struct cpucp_dev_info_signed - device information signed by a secured device
+ * @info: device information structure as defined above
+ * @nonce: number only used once. random number provided by host. this number is
+ * hashed and signed along with the device information.
+ * @info_sig_len: length of the attestation signature (bytes)
+ * @info_sig: signature of the info + nonce data.
+ * @pub_data_len: length of the public data (bytes)
+ * @public_data: public key info signed info data
+ * (outPublic + name + qualifiedName)
+ * @certificate_len: length of the certificate (bytes)
+ * @certificate: certificate for the signing key
+ */
+struct cpucp_dev_info_signed {
+ struct cpucp_info info; /* assumed to be 64bit aligned */
+ __le32 nonce;
+ __le32 pad0;
+ __u8 info_sig_len;
+ __u8 info_sig[SEC_SIGNATURE_BUF_SZ];
+ __le16 pub_data_len;
+ __u8 public_data[SEC_PUB_DATA_BUF_SZ];
+ __le16 certificate_len;
+ __u8 certificate[SEC_CERTIFICATE_BUF_SZ];
+};
+
/*
* struct dcore_monitor_regs_data - DCORE monitor regs data.
* the structure follows sync manager block layout. relevant only to Gaudi.
diff --git a/drivers/misc/habanalabs/include/common/hl_boot_if.h b/drivers/misc/habanalabs/include/common/hl_boot_if.h
index a3594119bc51..e0ea51cc7475 100644
--- a/drivers/misc/habanalabs/include/common/hl_boot_if.h
+++ b/drivers/misc/habanalabs/include/common/hl_boot_if.h
@@ -34,6 +34,7 @@ enum cpu_boot_err {
CPU_BOOT_ERR_BINNING_FAIL = 19,
CPU_BOOT_ERR_TPM_FAIL = 20,
CPU_BOOT_ERR_TMP_THRESH_INIT_FAIL = 21,
+ CPU_BOOT_ERR_EEPROM_FAIL = 22,
CPU_BOOT_ERR_ENABLED = 31,
CPU_BOOT_ERR_SCND_EN = 63,
CPU_BOOT_ERR_LAST = 64 /* we have 2 registers of 32 bits */
@@ -115,6 +116,9 @@ enum cpu_boot_err {
* CPU_BOOT_ERR0_TMP_THRESH_INIT_FAIL Failed to set threshold for tmperature
* sensor.
*
+ * CPU_BOOT_ERR_EEPROM_FAIL Failed reading EEPROM data. Defaults
+ * are used.
+ *
* CPU_BOOT_ERR0_ENABLED Error registers enabled.
* This is a main indication that the
* running FW populates the error
@@ -139,6 +143,7 @@ enum cpu_boot_err {
#define CPU_BOOT_ERR0_BINNING_FAIL (1 << CPU_BOOT_ERR_BINNING_FAIL)
#define CPU_BOOT_ERR0_TPM_FAIL (1 << CPU_BOOT_ERR_TPM_FAIL)
#define CPU_BOOT_ERR0_TMP_THRESH_INIT_FAIL (1 << CPU_BOOT_ERR_TMP_THRESH_INIT_FAIL)
+#define CPU_BOOT_ERR0_EEPROM_FAIL (1 << CPU_BOOT_ERR_EEPROM_FAIL)
#define CPU_BOOT_ERR0_ENABLED (1 << CPU_BOOT_ERR_ENABLED)
#define CPU_BOOT_ERR1_ENABLED (1 << CPU_BOOT_ERR_ENABLED)
@@ -426,7 +431,9 @@ struct cpu_dyn_regs {
__le32 gic_host_ints_irq;
__le32 gic_host_soft_rst_irq;
__le32 gic_rot_qm_irq_ctrl;
- __le32 reserved1[22]; /* reserve for future use */
+ __le32 cpu_rst_status;
+ __le32 eng_arc_irq_ctrl;
+ __le32 reserved1[20]; /* reserve for future use */
};
/* TODO: remove the desc magic after the code is updated to use message */
@@ -465,6 +472,26 @@ enum comms_msg_type {
HL_COMMS_BINNING_CONF_TYPE = 3,
};
+/*
+ * Binning information shared between LKD and FW
+ * @tpc_mask - TPC binning information
+ * @dec_mask - Decoder binning information
+ * @hbm_mask - HBM binning information
+ * @edma_mask - EDMA binning information
+ * @mme_mask_l - MME binning information lower 32
+ * @mme_mask_h - MME binning information upper 32
+ * @reserved - reserved field for 64 bit alignment
+ */
+struct lkd_fw_binning_info {
+ __le64 tpc_mask;
+ __le32 dec_mask;
+ __le32 hbm_mask;
+ __le32 edma_mask;
+ __le32 mme_mask_l;
+ __le32 mme_mask_h;
+ __le32 reserved;
+};
+
/* TODO: remove this struct after the code is updated to use message */
/* this is the comms descriptor header - meta data */
struct comms_desc_header {
@@ -525,13 +552,7 @@ struct lkd_fw_comms_msg {
struct {
__u8 fw_cfg_skip; /* 1 - skip, 0 - don't skip */
};
- struct {
- __le64 tpc_binning_conf;
- __le32 dec_binning_conf;
- __le32 hbm_binning_conf;
- __le32 edma_binning_conf;
- __le32 mme_redundancy_conf; /* use MME_REDUNDANT_COLUMN */
- };
+ struct lkd_fw_binning_info binning_info;
};
};
diff --git a/drivers/misc/habanalabs/include/gaudi2/asic_reg/gaudi2_regs.h b/drivers/misc/habanalabs/include/gaudi2/asic_reg/gaudi2_regs.h
index d0e2c68a639f..6aa1b1412462 100644
--- a/drivers/misc/habanalabs/include/gaudi2/asic_reg/gaudi2_regs.h
+++ b/drivers/misc/habanalabs/include/gaudi2/asic_reg/gaudi2_regs.h
@@ -132,6 +132,7 @@
#include "dcore0_mme_ctrl_lo_arch_tensor_a_regs.h"
#include "dcore0_mme_ctrl_lo_arch_tensor_b_regs.h"
#include "dcore0_mme_ctrl_lo_arch_tensor_cout_regs.h"
+#include "pcie_wrap_special_regs.h"
#include "pdma0_qm_masks.h"
#include "pdma0_core_masks.h"
@@ -239,6 +240,7 @@
#define SFT_IF_RTR_OFFSET (mmSFT0_HBW_RTR_IF1_RTR_H3_BASE - mmSFT0_HBW_RTR_IF0_RTR_H3_BASE)
#define ARC_HALT_REQ_OFFSET (mmARC_FARM_ARC0_AUX_RUN_HALT_REQ - mmARC_FARM_ARC0_AUX_BASE)
+#define ARC_HALT_ACK_OFFSET (mmARC_FARM_ARC0_AUX_RUN_HALT_ACK - mmARC_FARM_ARC0_AUX_BASE)
#define ARC_REGION_CFG_OFFSET(region) \
(mmARC_FARM_ARC0_AUX_ARC_REGION_CFG_0 + (region * 4) - mmARC_FARM_ARC0_AUX_BASE)
diff --git a/drivers/misc/habanalabs/include/gaudi2/asic_reg/pcie_wrap_special_regs.h b/drivers/misc/habanalabs/include/gaudi2/asic_reg/pcie_wrap_special_regs.h
new file mode 100644
index 000000000000..46558e7a7f63
--- /dev/null
+++ b/drivers/misc/habanalabs/include/gaudi2/asic_reg/pcie_wrap_special_regs.h
@@ -0,0 +1,185 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright 2016-2020 HabanaLabs, Ltd.
+ * All Rights Reserved.
+ *
+ */
+
+/************************************
+ ** This is an auto-generated file **
+ ** DO NOT EDIT BELOW **
+ ************************************/
+
+#ifndef ASIC_REG_PCIE_WRAP_SPECIAL_REGS_H_
+#define ASIC_REG_PCIE_WRAP_SPECIAL_REGS_H_
+
+/*
+ *****************************************
+ * PCIE_WRAP_SPECIAL
+ * (Prototype: SPECIAL_REGS)
+ *****************************************
+ */
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_0 0x4C01E80
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_1 0x4C01E84
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_2 0x4C01E88
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_3 0x4C01E8C
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_4 0x4C01E90
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_5 0x4C01E94
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_6 0x4C01E98
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_7 0x4C01E9C
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_8 0x4C01EA0
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_9 0x4C01EA4
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_10 0x4C01EA8
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_11 0x4C01EAC
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_12 0x4C01EB0
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_13 0x4C01EB4
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_14 0x4C01EB8
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_15 0x4C01EBC
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_16 0x4C01EC0
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_17 0x4C01EC4
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_18 0x4C01EC8
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_19 0x4C01ECC
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_20 0x4C01ED0
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_21 0x4C01ED4
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_22 0x4C01ED8
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_23 0x4C01EDC
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_24 0x4C01EE0
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_25 0x4C01EE4
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_26 0x4C01EE8
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_27 0x4C01EEC
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_28 0x4C01EF0
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_29 0x4C01EF4
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_30 0x4C01EF8
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_PRIV_31 0x4C01EFC
+
+#define mmPCIE_WRAP_SPECIAL_MEM_GW_DATA 0x4C01F00
+
+#define mmPCIE_WRAP_SPECIAL_MEM_GW_REQ 0x4C01F04
+
+#define mmPCIE_WRAP_SPECIAL_MEM_NUMOF 0x4C01F0C
+
+#define mmPCIE_WRAP_SPECIAL_MEM_ECC_SEL 0x4C01F10
+
+#define mmPCIE_WRAP_SPECIAL_MEM_ECC_CTL 0x4C01F14
+
+#define mmPCIE_WRAP_SPECIAL_MEM_ECC_ERR_MASK 0x4C01F18
+
+#define mmPCIE_WRAP_SPECIAL_MEM_ECC_GLBL_ERR_MASK 0x4C01F1C
+
+#define mmPCIE_WRAP_SPECIAL_MEM_ECC_ERR_STS 0x4C01F20
+
+#define mmPCIE_WRAP_SPECIAL_MEM_ECC_ERR_ADDR 0x4C01F24
+
+#define mmPCIE_WRAP_SPECIAL_MEM_RM 0x4C01F28
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_ERR_MASK 0x4C01F40
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_ERR_ADDR 0x4C01F44
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_ERR_CAUSE 0x4C01F48
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SPARE_0 0x4C01F60
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SPARE_1 0x4C01F64
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SPARE_2 0x4C01F68
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SPARE_3 0x4C01F6C
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_0 0x4C01F80
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_1 0x4C01F84
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_2 0x4C01F88
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_3 0x4C01F8C
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_4 0x4C01F90
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_5 0x4C01F94
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_6 0x4C01F98
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_7 0x4C01F9C
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_8 0x4C01FA0
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_9 0x4C01FA4
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_10 0x4C01FA8
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_11 0x4C01FAC
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_12 0x4C01FB0
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_13 0x4C01FB4
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_14 0x4C01FB8
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_15 0x4C01FBC
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_16 0x4C01FC0
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_17 0x4C01FC4
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_18 0x4C01FC8
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_19 0x4C01FCC
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_20 0x4C01FD0
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_21 0x4C01FD4
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_22 0x4C01FD8
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_23 0x4C01FDC
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_24 0x4C01FE0
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_25 0x4C01FE4
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_26 0x4C01FE8
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_27 0x4C01FEC
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_28 0x4C01FF0
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_29 0x4C01FF4
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_30 0x4C01FF8
+
+#define mmPCIE_WRAP_SPECIAL_GLBL_SEC_31 0x4C01FFC
+
+#endif /* ASIC_REG_PCIE_WRAP_SPECIAL_REGS_H_ */
diff --git a/drivers/misc/habanalabs/include/gaudi2/gaudi2_async_virt_events.h b/drivers/misc/habanalabs/include/gaudi2/gaudi2_async_virt_events.h
deleted file mode 100644
index 6d6ed7838a64..000000000000
--- a/drivers/misc/habanalabs/include/gaudi2/gaudi2_async_virt_events.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0
- *
- * Copyright 2022 HabanaLabs, Ltd.
- * All Rights Reserved.
- *
- */
-
-#ifndef __GAUDI2_ASYNC_VIRT_EVENTS_H_
-#define __GAUDI2_ASYNC_VIRT_EVENTS_H_
-
-enum gaudi2_async_virt_event_id {
- GAUDI2_EVENT_NIC3_QM1_OLD = 1206,
- GAUDI2_EVENT_NIC4_QM0_OLD = 1207,
- GAUDI2_EVENT_NIC4_QM1_OLD = 1208,
- GAUDI2_EVENT_NIC5_QM0_OLD = 1209,
- GAUDI2_EVENT_NIC5_QM1_OLD = 1210,
- GAUDI2_EVENT_NIC6_QM0_OLD = 1211,
- GAUDI2_EVENT_NIC6_QM1_OLD = 1212,
- GAUDI2_EVENT_NIC7_QM0_OLD = 1213,
- GAUDI2_EVENT_NIC7_QM1_OLD = 1214,
- GAUDI2_EVENT_NIC8_QM0_OLD = 1215,
- GAUDI2_EVENT_NIC8_QM1_OLD = 1216,
- GAUDI2_EVENT_NIC9_QM0_OLD = 1217,
- GAUDI2_EVENT_NIC9_QM1_OLD = 1218,
- GAUDI2_EVENT_NIC10_QM0_OLD = 1219,
- GAUDI2_EVENT_NIC10_QM1_OLD = 1220,
- GAUDI2_EVENT_NIC11_QM0_OLD = 1221,
- GAUDI2_EVENT_NIC11_QM1_OLD = 1222,
- GAUDI2_EVENT_CPU_PKT_SANITY_FAILED_OLD = 1223,
- GAUDI2_EVENT_CPU0_STATUS_NIC0_ENG0_OLD = 1224,
- GAUDI2_EVENT_CPU0_STATUS_NIC0_ENG1_OLD = 1225,
- GAUDI2_EVENT_CPU1_STATUS_NIC1_ENG0_OLD = 1226,
- GAUDI2_EVENT_CPU1_STATUS_NIC1_ENG1_OLD = 1227,
- GAUDI2_EVENT_CPU2_STATUS_NIC2_ENG0_OLD = 1228,
- GAUDI2_EVENT_CPU2_STATUS_NIC2_ENG1_OLD = 1229,
- GAUDI2_EVENT_CPU3_STATUS_NIC3_ENG0_OLD = 1230,
- GAUDI2_EVENT_CPU3_STATUS_NIC3_ENG1_OLD = 1231,
- GAUDI2_EVENT_CPU4_STATUS_NIC4_ENG0_OLD = 1232,
- GAUDI2_EVENT_CPU4_STATUS_NIC4_ENG1_OLD = 1233,
- GAUDI2_EVENT_CPU5_STATUS_NIC5_ENG0_OLD = 1234,
- GAUDI2_EVENT_CPU5_STATUS_NIC5_ENG1_OLD = 1235,
- GAUDI2_EVENT_CPU6_STATUS_NIC6_ENG0_OLD = 1236,
- GAUDI2_EVENT_CPU6_STATUS_NIC6_ENG1_OLD = 1237,
- GAUDI2_EVENT_CPU7_STATUS_NIC7_ENG0_OLD = 1238,
- GAUDI2_EVENT_CPU7_STATUS_NIC7_ENG1_OLD = 1239,
- GAUDI2_EVENT_CPU8_STATUS_NIC8_ENG0_OLD = 1240,
- GAUDI2_EVENT_CPU8_STATUS_NIC8_ENG1_OLD = 1241,
- GAUDI2_EVENT_CPU9_STATUS_NIC9_ENG0_OLD = 1242,
- GAUDI2_EVENT_CPU9_STATUS_NIC9_ENG1_OLD = 1243,
- GAUDI2_EVENT_CPU10_STATUS_NIC10_ENG0_OLD = 1244,
- GAUDI2_EVENT_CPU10_STATUS_NIC10_ENG1_OLD = 1245,
- GAUDI2_EVENT_CPU11_STATUS_NIC11_ENG0_OLD = 1246,
- GAUDI2_EVENT_CPU11_STATUS_NIC11_ENG1_OLD = 1247,
- GAUDI2_EVENT_ARC_DCCM_FULL_OLD = 1248,
-};
-
-#endif /* __GAUDI2_ASYNC_VIRT_EVENTS_H_ */
diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c
index 2c4bb6d6e1a0..1cb71df966a4 100644
--- a/drivers/misc/ics932s401.c
+++ b/drivers/misc/ics932s401.c
@@ -424,7 +424,7 @@ static int ics932s401_detect(struct i2c_client *client,
if (revision != ICS932S401_REV)
dev_info(&adapter->dev, "Unknown revision %d\n", revision);
- strlcpy(info->type, "ics932s401", I2C_NAME_SIZE);
+ strscpy(info->type, "ics932s401", I2C_NAME_SIZE);
return 0;
}
diff --git a/drivers/misc/mchp_pci1xxxx/Kconfig b/drivers/misc/mchp_pci1xxxx/Kconfig
new file mode 100644
index 000000000000..4abb47de7219
--- /dev/null
+++ b/drivers/misc/mchp_pci1xxxx/Kconfig
@@ -0,0 +1,13 @@
+config GP_PCI1XXXX
+ tristate "Microchip PCI1XXXX PCIe to GPIO Expander + OTP/EEPROM manager"
+ depends on PCI
+ depends on GPIOLIB
+ select GPIOLIB_IRQCHIP
+ select AUXILIARY_BUS
+ help
+ PCI1XXXX is a PCIe GEN 3 switch with one of the endpoints having
+ multiple functions and one of the functions is a GPIO controller
+ which also has registers to interface with the OTP and EEPROM.
+ Select yes, no or module here to include or exclude the driver
+ for the GPIO function.
+
diff --git a/drivers/misc/mchp_pci1xxxx/Makefile b/drivers/misc/mchp_pci1xxxx/Makefile
new file mode 100644
index 000000000000..fc4615cfe28b
--- /dev/null
+++ b/drivers/misc/mchp_pci1xxxx/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_GP_PCI1XXXX) := mchp_pci1xxxx_gp.o mchp_pci1xxxx_gpio.o
diff --git a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c
new file mode 100644
index 000000000000..32af2b14ff34
--- /dev/null
+++ b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2022 Microchip Technology Inc.
+
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/idr.h>
+#include "mchp_pci1xxxx_gp.h"
+
+struct aux_bus_device {
+ struct auxiliary_device_wrapper *aux_device_wrapper[2];
+};
+
+static DEFINE_IDA(gp_client_ida);
+static const char aux_dev_otp_e2p_name[15] = "gp_otp_e2p";
+static const char aux_dev_gpio_name[15] = "gp_gpio";
+
+static void gp_auxiliary_device_release(struct device *dev)
+{
+ struct auxiliary_device_wrapper *aux_device_wrapper =
+ (struct auxiliary_device_wrapper *)container_of(dev,
+ struct auxiliary_device_wrapper, aux_dev.dev);
+
+ ida_free(&gp_client_ida, aux_device_wrapper->aux_dev.id);
+ kfree(aux_device_wrapper);
+}
+
+static int gp_aux_bus_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct aux_bus_device *aux_bus;
+ int retval;
+
+ retval = pcim_enable_device(pdev);
+ if (retval)
+ return retval;
+
+ aux_bus = devm_kzalloc(&pdev->dev, sizeof(*aux_bus), GFP_KERNEL);
+ if (!aux_bus)
+ return -ENOMEM;
+
+ aux_bus->aux_device_wrapper[0] = kzalloc(sizeof(*aux_bus->aux_device_wrapper[0]),
+ GFP_KERNEL);
+ if (!aux_bus->aux_device_wrapper[0])
+ return -ENOMEM;
+
+ retval = ida_alloc(&gp_client_ida, GFP_KERNEL);
+ if (retval < 0)
+ goto err_ida_alloc_0;
+
+ aux_bus->aux_device_wrapper[0]->aux_dev.name = aux_dev_otp_e2p_name;
+ aux_bus->aux_device_wrapper[0]->aux_dev.dev.parent = &pdev->dev;
+ aux_bus->aux_device_wrapper[0]->aux_dev.dev.release = gp_auxiliary_device_release;
+ aux_bus->aux_device_wrapper[0]->aux_dev.id = retval;
+
+ aux_bus->aux_device_wrapper[0]->gp_aux_data.region_start = pci_resource_start(pdev, 0);
+ aux_bus->aux_device_wrapper[0]->gp_aux_data.region_length = pci_resource_end(pdev, 0);
+
+ retval = auxiliary_device_init(&aux_bus->aux_device_wrapper[0]->aux_dev);
+ if (retval < 0)
+ goto err_aux_dev_init_0;
+
+ retval = auxiliary_device_add(&aux_bus->aux_device_wrapper[0]->aux_dev);
+ if (retval)
+ goto err_aux_dev_add_0;
+
+ aux_bus->aux_device_wrapper[1] = kzalloc(sizeof(*aux_bus->aux_device_wrapper[1]),
+ GFP_KERNEL);
+ if (!aux_bus->aux_device_wrapper[1])
+ return -ENOMEM;
+
+ retval = ida_alloc(&gp_client_ida, GFP_KERNEL);
+ if (retval < 0)
+ goto err_ida_alloc_1;
+
+ aux_bus->aux_device_wrapper[1]->aux_dev.name = aux_dev_gpio_name;
+ aux_bus->aux_device_wrapper[1]->aux_dev.dev.parent = &pdev->dev;
+ aux_bus->aux_device_wrapper[1]->aux_dev.dev.release = gp_auxiliary_device_release;
+ aux_bus->aux_device_wrapper[1]->aux_dev.id = retval;
+
+ aux_bus->aux_device_wrapper[1]->gp_aux_data.region_start = pci_resource_start(pdev, 0);
+ aux_bus->aux_device_wrapper[1]->gp_aux_data.region_length = pci_resource_end(pdev, 0);
+
+ retval = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+
+ if (retval < 0)
+ goto err_aux_dev_init_1;
+
+ retval = pci_irq_vector(pdev, 0);
+ if (retval < 0)
+ goto err_aux_dev_init_1;
+
+ pdev->irq = retval;
+ aux_bus->aux_device_wrapper[1]->gp_aux_data.irq_num = pdev->irq;
+
+ retval = auxiliary_device_init(&aux_bus->aux_device_wrapper[1]->aux_dev);
+ if (retval < 0)
+ goto err_aux_dev_init_1;
+
+ retval = auxiliary_device_add(&aux_bus->aux_device_wrapper[1]->aux_dev);
+ if (retval)
+ goto err_aux_dev_add_1;
+
+ pci_set_drvdata(pdev, aux_bus);
+ pci_set_master(pdev);
+
+ return 0;
+
+err_aux_dev_add_1:
+ auxiliary_device_uninit(&aux_bus->aux_device_wrapper[1]->aux_dev);
+
+err_aux_dev_init_1:
+ ida_free(&gp_client_ida, aux_bus->aux_device_wrapper[1]->aux_dev.id);
+
+err_ida_alloc_1:
+ kfree(aux_bus->aux_device_wrapper[1]);
+
+err_aux_dev_add_0:
+ auxiliary_device_uninit(&aux_bus->aux_device_wrapper[0]->aux_dev);
+
+err_aux_dev_init_0:
+ ida_free(&gp_client_ida, aux_bus->aux_device_wrapper[0]->aux_dev.id);
+
+err_ida_alloc_0:
+ kfree(aux_bus->aux_device_wrapper[0]);
+
+ return retval;
+}
+
+static void gp_aux_bus_remove(struct pci_dev *pdev)
+{
+ struct aux_bus_device *aux_bus = pci_get_drvdata(pdev);
+
+ auxiliary_device_delete(&aux_bus->aux_device_wrapper[0]->aux_dev);
+ auxiliary_device_uninit(&aux_bus->aux_device_wrapper[0]->aux_dev);
+ auxiliary_device_delete(&aux_bus->aux_device_wrapper[1]->aux_dev);
+ auxiliary_device_uninit(&aux_bus->aux_device_wrapper[1]->aux_dev);
+}
+
+static const struct pci_device_id pci1xxxx_tbl[] = {
+ { PCI_DEVICE(0x1055, 0xA005) },
+ { PCI_DEVICE(0x1055, 0xA015) },
+ { PCI_DEVICE(0x1055, 0xA025) },
+ { PCI_DEVICE(0x1055, 0xA035) },
+ { PCI_DEVICE(0x1055, 0xA045) },
+ { PCI_DEVICE(0x1055, 0xA055) },
+ {0,}
+};
+MODULE_DEVICE_TABLE(pci, pci1xxxx_tbl);
+
+static struct pci_driver pci1xxxx_gp_driver = {
+ .name = "PCI1xxxxGP",
+ .id_table = pci1xxxx_tbl,
+ .probe = gp_aux_bus_probe,
+ .remove = gp_aux_bus_remove,
+};
+
+module_pci_driver(pci1xxxx_gp_driver);
+
+MODULE_DESCRIPTION("Microchip Technology Inc. PCI1xxxx GP expander");
+MODULE_AUTHOR("Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.h b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.h
new file mode 100644
index 000000000000..37eec73b20d7
--- /dev/null
+++ b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gp.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2022 Microchip Technology Inc. */
+
+#ifndef _GPIO_PCI1XXXX_H
+#define _GPIO_PCI1XXXX_H
+
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/kthread.h>
+#include <linux/types.h>
+#include <linux/auxiliary_bus.h>
+
+/* Perform operations like variable length write, read and write with read back for OTP / EEPROM
+ * Perform bit mode write in OTP
+ */
+
+struct gp_aux_data_type {
+ int irq_num;
+ resource_size_t region_start;
+ resource_size_t region_length;
+};
+
+struct auxiliary_device_wrapper {
+ struct auxiliary_device aux_dev;
+ struct gp_aux_data_type gp_aux_data;
+};
+
+#endif
diff --git a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c
new file mode 100644
index 000000000000..3389803cb281
--- /dev/null
+++ b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2022 Microchip Technology Inc.
+// pci1xxxx gpio driver
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/gpio/driver.h>
+#include <linux/bio.h>
+#include <linux/mutex.h>
+#include <linux/kthread.h>
+#include <linux/interrupt.h>
+
+#include "mchp_pci1xxxx_gp.h"
+
+#define PCI1XXXX_NR_PINS 93
+#define PERI_GEN_RESET 0
+#define OUT_EN_OFFSET(x) ((((x) / 32) * 4) + 0x400)
+#define INP_EN_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x10)
+#define OUT_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x20)
+#define INP_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x30)
+#define PULLUP_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x40)
+#define PULLDOWN_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x50)
+#define OPENDRAIN_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x60)
+#define WAKEMASK_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x70)
+#define MODE_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x80)
+#define INTR_LO_TO_HI_EDGE_CONFIG(x) ((((x) / 32) * 4) + 0x400 + 0x90)
+#define INTR_HI_TO_LO_EDGE_CONFIG(x) ((((x) / 32) * 4) + 0x400 + 0xA0)
+#define INTR_LEVEL_CONFIG_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0xB0)
+#define INTR_LEVEL_MASK_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0xC0)
+#define INTR_STAT_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0xD0)
+#define DEBOUNCE_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0xE0)
+#define PIO_GLOBAL_CONFIG_OFFSET (0x400 + 0xF0)
+#define PIO_PCI_CTRL_REG_OFFSET (0x400 + 0xF4)
+#define INTR_MASK_OFFSET(x) ((((x) / 32) * 4) + 0x400 + 0x100)
+#define INTR_STATUS_OFFSET(x) (((x) * 4) + 0x400 + 0xD0)
+
+struct pci1xxxx_gpio {
+ struct auxiliary_device *aux_dev;
+ void __iomem *reg_base;
+ struct gpio_chip gpio;
+ spinlock_t lock;
+ int irq_base;
+};
+
+static int pci1xxxx_gpio_get_direction(struct gpio_chip *gpio, unsigned int nr)
+{
+ struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio);
+ u32 data;
+ int ret = -EINVAL;
+
+ data = readl(priv->reg_base + INP_EN_OFFSET(nr));
+ if (data & BIT(nr % 32)) {
+ ret = 1;
+ } else {
+ data = readl(priv->reg_base + OUT_EN_OFFSET(nr));
+ if (data & BIT(nr % 32))
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static inline void pci1xxx_assign_bit(void __iomem *base_addr, unsigned int reg_offset,
+ unsigned int bitpos, bool set)
+{
+ u32 data;
+
+ data = readl(base_addr + reg_offset);
+ if (set)
+ data |= BIT(bitpos);
+ else
+ data &= ~BIT(bitpos);
+ writel(data, base_addr + reg_offset);
+}
+
+static int pci1xxxx_gpio_direction_input(struct gpio_chip *gpio, unsigned int nr)
+{
+ struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ pci1xxx_assign_bit(priv->reg_base, INP_EN_OFFSET(nr), (nr % 32), true);
+ pci1xxx_assign_bit(priv->reg_base, OUT_EN_OFFSET(nr), (nr % 32), false);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int pci1xxxx_gpio_get(struct gpio_chip *gpio, unsigned int nr)
+{
+ struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio);
+
+ return (readl(priv->reg_base + INP_OFFSET(nr)) >> (nr % 32)) & 1;
+}
+
+static int pci1xxxx_gpio_direction_output(struct gpio_chip *gpio,
+ unsigned int nr, int val)
+{
+ struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio);
+ unsigned long flags;
+ u32 data;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ pci1xxx_assign_bit(priv->reg_base, INP_EN_OFFSET(nr), (nr % 32), false);
+ pci1xxx_assign_bit(priv->reg_base, OUT_EN_OFFSET(nr), (nr % 32), true);
+ data = readl(priv->reg_base + OUT_OFFSET(nr));
+ if (val)
+ data |= (1 << (nr % 32));
+ else
+ data &= ~(1 << (nr % 32));
+ writel(data, priv->reg_base + OUT_OFFSET(nr));
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static void pci1xxxx_gpio_set(struct gpio_chip *gpio,
+ unsigned int nr, int val)
+{
+ struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ pci1xxx_assign_bit(priv->reg_base, OUT_OFFSET(nr), (nr % 32), val);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int pci1xxxx_gpio_set_config(struct gpio_chip *gpio, unsigned int offset,
+ unsigned long config)
+{
+ struct pci1xxxx_gpio *priv = gpiochip_get_data(gpio);
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ switch (pinconf_to_config_param(config)) {
+ case PIN_CONFIG_BIAS_PULL_UP:
+ pci1xxx_assign_bit(priv->reg_base, PULLUP_OFFSET(offset), (offset % 32), true);
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ pci1xxx_assign_bit(priv->reg_base, PULLDOWN_OFFSET(offset), (offset % 32), true);
+ break;
+ case PIN_CONFIG_BIAS_DISABLE:
+ pci1xxx_assign_bit(priv->reg_base, PULLUP_OFFSET(offset), (offset % 32), false);
+ pci1xxx_assign_bit(priv->reg_base, PULLDOWN_OFFSET(offset), (offset % 32), false);
+ break;
+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+ pci1xxx_assign_bit(priv->reg_base, OPENDRAIN_OFFSET(offset), (offset % 32), true);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return ret;
+}
+
+static void pci1xxxx_gpio_irq_ack(struct irq_data *data)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct pci1xxxx_gpio *priv = gpiochip_get_data(chip);
+ unsigned int gpio = irqd_to_hwirq(data);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ pci1xxx_assign_bit(priv->reg_base, INTR_STAT_OFFSET(gpio), (gpio % 32), true);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void pci1xxxx_gpio_irq_set_mask(struct irq_data *data, bool set)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct pci1xxxx_gpio *priv = gpiochip_get_data(chip);
+ unsigned int gpio = irqd_to_hwirq(data);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ pci1xxx_assign_bit(priv->reg_base, INTR_MASK_OFFSET(gpio), (gpio % 32), set);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void pci1xxxx_gpio_irq_mask(struct irq_data *data)
+{
+ pci1xxxx_gpio_irq_set_mask(data, true);
+}
+
+static void pci1xxxx_gpio_irq_unmask(struct irq_data *data)
+{
+ pci1xxxx_gpio_irq_set_mask(data, false);
+}
+
+static int pci1xxxx_gpio_set_type(struct irq_data *data, unsigned int trigger_type)
+{
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct pci1xxxx_gpio *priv = gpiochip_get_data(chip);
+ unsigned int gpio = irqd_to_hwirq(data);
+ unsigned int bitpos = gpio % 32;
+
+ if (trigger_type & IRQ_TYPE_EDGE_FALLING) {
+ pci1xxx_assign_bit(priv->reg_base, INTR_HI_TO_LO_EDGE_CONFIG(gpio),
+ bitpos, false);
+ pci1xxx_assign_bit(priv->reg_base, MODE_OFFSET(gpio),
+ bitpos, false);
+ irq_set_handler_locked(data, handle_edge_irq);
+ } else {
+ pci1xxx_assign_bit(priv->reg_base, INTR_HI_TO_LO_EDGE_CONFIG(gpio),
+ bitpos, true);
+ }
+
+ if (trigger_type & IRQ_TYPE_EDGE_RISING) {
+ pci1xxx_assign_bit(priv->reg_base, INTR_LO_TO_HI_EDGE_CONFIG(gpio),
+ bitpos, false);
+ pci1xxx_assign_bit(priv->reg_base, MODE_OFFSET(gpio), bitpos,
+ false);
+ irq_set_handler_locked(data, handle_edge_irq);
+ } else {
+ pci1xxx_assign_bit(priv->reg_base, INTR_LO_TO_HI_EDGE_CONFIG(gpio),
+ bitpos, true);
+ }
+
+ if (trigger_type & IRQ_TYPE_LEVEL_LOW) {
+ pci1xxx_assign_bit(priv->reg_base, INTR_LEVEL_CONFIG_OFFSET(gpio),
+ bitpos, true);
+ pci1xxx_assign_bit(priv->reg_base, INTR_LEVEL_MASK_OFFSET(gpio),
+ bitpos, false);
+ pci1xxx_assign_bit(priv->reg_base, MODE_OFFSET(gpio), bitpos,
+ true);
+ irq_set_handler_locked(data, handle_edge_irq);
+ }
+
+ if (trigger_type & IRQ_TYPE_LEVEL_HIGH) {
+ pci1xxx_assign_bit(priv->reg_base, INTR_LEVEL_CONFIG_OFFSET(gpio),
+ bitpos, false);
+ pci1xxx_assign_bit(priv->reg_base, INTR_LEVEL_MASK_OFFSET(gpio),
+ bitpos, false);
+ pci1xxx_assign_bit(priv->reg_base, MODE_OFFSET(gpio), bitpos,
+ true);
+ irq_set_handler_locked(data, handle_edge_irq);
+ }
+
+ if ((!(trigger_type & IRQ_TYPE_LEVEL_LOW)) && (!(trigger_type & IRQ_TYPE_LEVEL_HIGH)))
+ pci1xxx_assign_bit(priv->reg_base, INTR_LEVEL_MASK_OFFSET(gpio), bitpos, true);
+
+ return true;
+}
+
+static irqreturn_t pci1xxxx_gpio_irq_handler(int irq, void *dev_id)
+{
+ struct pci1xxxx_gpio *priv = dev_id;
+ struct gpio_chip *gc = &priv->gpio;
+ unsigned long int_status = 0;
+ unsigned long flags;
+ u8 pincount;
+ int bit;
+ u8 gpiobank;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ pci1xxx_assign_bit(priv->reg_base, PIO_GLOBAL_CONFIG_OFFSET, 16, true);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ for (gpiobank = 0; gpiobank < 3; gpiobank++) {
+ spin_lock_irqsave(&priv->lock, flags);
+ int_status = readl(priv->reg_base + INTR_STATUS_OFFSET(gpiobank));
+ spin_unlock_irqrestore(&priv->lock, flags);
+ if (gpiobank == 2)
+ pincount = 29;
+ else
+ pincount = 32;
+ for_each_set_bit(bit, &int_status, pincount) {
+ unsigned int irq;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ writel(BIT(bit), priv->reg_base + INTR_STATUS_OFFSET(gpiobank));
+ spin_unlock_irqrestore(&priv->lock, flags);
+ irq = irq_find_mapping(gc->irq.domain, (bit + (gpiobank * 32)));
+ generic_handle_irq(irq);
+ }
+ }
+ spin_lock_irqsave(&priv->lock, flags);
+ pci1xxx_assign_bit(priv->reg_base, PIO_GLOBAL_CONFIG_OFFSET, 16, false);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static struct irq_chip pci1xxxx_gpio_irqchip = {
+ .name = "pci1xxxx_gpio",
+ .irq_ack = pci1xxxx_gpio_irq_ack,
+ .irq_mask = pci1xxxx_gpio_irq_mask,
+ .irq_unmask = pci1xxxx_gpio_irq_unmask,
+ .irq_set_type = pci1xxxx_gpio_set_type,
+};
+
+static int pci1xxxx_gpio_suspend(struct device *dev)
+{
+ struct pci1xxxx_gpio *priv = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ pci1xxx_assign_bit(priv->reg_base, PIO_GLOBAL_CONFIG_OFFSET,
+ 16, true);
+ pci1xxx_assign_bit(priv->reg_base, PIO_GLOBAL_CONFIG_OFFSET,
+ 17, false);
+ pci1xxx_assign_bit(priv->reg_base, PERI_GEN_RESET, 16, true);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int pci1xxxx_gpio_resume(struct device *dev)
+{
+ struct pci1xxxx_gpio *priv = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ pci1xxx_assign_bit(priv->reg_base, PIO_GLOBAL_CONFIG_OFFSET,
+ 17, true);
+ pci1xxx_assign_bit(priv->reg_base, PIO_GLOBAL_CONFIG_OFFSET,
+ 16, false);
+ pci1xxx_assign_bit(priv->reg_base, PERI_GEN_RESET, 16, false);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int pci1xxxx_gpio_setup(struct pci1xxxx_gpio *priv, int irq)
+{
+ struct gpio_chip *gchip = &priv->gpio;
+ struct gpio_irq_chip *girq;
+ int retval;
+
+ gchip->label = dev_name(&priv->aux_dev->dev);
+ gchip->parent = &priv->aux_dev->dev;
+ gchip->owner = THIS_MODULE;
+ gchip->direction_input = pci1xxxx_gpio_direction_input;
+ gchip->direction_output = pci1xxxx_gpio_direction_output;
+ gchip->get_direction = pci1xxxx_gpio_get_direction;
+ gchip->get = pci1xxxx_gpio_get;
+ gchip->set = pci1xxxx_gpio_set;
+ gchip->set_config = pci1xxxx_gpio_set_config;
+ gchip->dbg_show = NULL;
+ gchip->base = -1;
+ gchip->ngpio = PCI1XXXX_NR_PINS;
+ gchip->can_sleep = false;
+
+ retval = devm_request_threaded_irq(&priv->aux_dev->dev, irq,
+ NULL, pci1xxxx_gpio_irq_handler,
+ IRQF_ONESHOT, "PCI1xxxxGPIO", priv);
+
+ if (retval)
+ return retval;
+
+ girq = &priv->gpio.irq;
+ girq->chip = &pci1xxxx_gpio_irqchip;
+ girq->parent_handler = NULL;
+ girq->num_parents = 0;
+ girq->parents = NULL;
+ girq->default_type = IRQ_TYPE_NONE;
+ girq->handler = handle_bad_irq;
+
+ return 0;
+}
+
+static int pci1xxxx_gpio_probe(struct auxiliary_device *aux_dev,
+ const struct auxiliary_device_id *id)
+
+{
+ struct auxiliary_device_wrapper *aux_dev_wrapper;
+ struct gp_aux_data_type *pdata;
+ struct pci1xxxx_gpio *priv;
+ int retval;
+
+ aux_dev_wrapper = (struct auxiliary_device_wrapper *)
+ container_of(aux_dev, struct auxiliary_device_wrapper, aux_dev);
+
+ pdata = &aux_dev_wrapper->gp_aux_data;
+
+ if (!pdata)
+ return -EINVAL;
+
+ priv = devm_kzalloc(&aux_dev->dev, sizeof(struct pci1xxxx_gpio), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->lock);
+ priv->aux_dev = aux_dev;
+
+ if (!devm_request_mem_region(&aux_dev->dev, pdata->region_start, 0x800, aux_dev->name))
+ return -EBUSY;
+
+ priv->reg_base = devm_ioremap(&aux_dev->dev, pdata->region_start, 0x800);
+ if (!priv->reg_base)
+ return -ENOMEM;
+
+ writel(0x0264, (priv->reg_base + 0x400 + 0xF0));
+
+ retval = pci1xxxx_gpio_setup(priv, pdata->irq_num);
+
+ if (retval < 0)
+ return retval;
+
+ dev_set_drvdata(&aux_dev->dev, priv);
+
+ return devm_gpiochip_add_data(&aux_dev->dev, &priv->gpio, priv);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(pci1xxxx_gpio_pm_ops, pci1xxxx_gpio_suspend, pci1xxxx_gpio_resume);
+
+static const struct auxiliary_device_id pci1xxxx_gpio_auxiliary_id_table[] = {
+ {.name = "mchp_pci1xxxx_gp.gp_gpio"},
+ {}
+};
+MODULE_DEVICE_TABLE(auxiliary, pci1xxxx_gpio_auxiliary_id_table);
+
+static struct auxiliary_driver pci1xxxx_gpio_driver = {
+ .driver = {
+ .name = "PCI1xxxxGPIO",
+ .pm = &pci1xxxx_gpio_pm_ops,
+ },
+ .probe = pci1xxxx_gpio_probe,
+ .id_table = pci1xxxx_gpio_auxiliary_id_table
+};
+module_auxiliary_driver(pci1xxxx_gpio_driver);
+
+MODULE_DESCRIPTION("Microchip Technology Inc. PCI1xxxx GPIO controller");
+MODULE_AUTHOR("Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c
index 79305e4acce2..71fbf0bc8453 100644
--- a/drivers/misc/mei/bus-fixup.c
+++ b/drivers/misc/mei/bus-fixup.c
@@ -487,7 +487,7 @@ static void mei_nfc(struct mei_cl_device *cldev)
}
dev_dbg(bus->dev, "nfc radio %s\n", radio_name);
- strlcpy(cldev->name, radio_name, sizeof(cldev->name));
+ strscpy(cldev->name, radio_name, sizeof(cldev->name));
disconnect:
mutex_lock(&bus->device_lock);
diff --git a/drivers/misc/mei/gsc-me.c b/drivers/misc/mei/gsc-me.c
index 75765e4df4ed..e63cabd0818d 100644
--- a/drivers/misc/mei/gsc-me.c
+++ b/drivers/misc/mei/gsc-me.c
@@ -68,7 +68,6 @@ static int mei_gsc_probe(struct auxiliary_device *aux_dev,
hw = to_me_hw(dev);
hw->mem_addr = devm_ioremap_resource(device, &adev->bar);
if (IS_ERR(hw->mem_addr)) {
- dev_err(device, "mmio not mapped\n");
ret = PTR_ERR(hw->mem_addr);
goto err;
}
diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c
index 9862c6cd3e32..5d0f68b95c29 100644
--- a/drivers/misc/mei/hw-txe.c
+++ b/drivers/misc/mei/hw-txe.c
@@ -176,7 +176,7 @@ static bool mei_txe_aliveness_set(struct mei_device *dev, u32 req)
* @dev: the device structure
*
* Extract HICR_HOST_ALIVENESS_RESP_ACK bit from
- * from HICR_HOST_ALIVENESS_REQ register value
+ * HICR_HOST_ALIVENESS_REQ register value
*
* Return: SICR_HOST_ALIVENESS_REQ_REQUESTED bit value
*/
diff --git a/drivers/misc/ocxl/file.c b/drivers/misc/ocxl/file.c
index 6777c419a8da..d46dba2df5a1 100644
--- a/drivers/misc/ocxl/file.c
+++ b/drivers/misc/ocxl/file.c
@@ -257,6 +257,8 @@ static long afu_ioctl(struct file *file, unsigned int cmd,
if (IS_ERR(ev_ctx))
return PTR_ERR(ev_ctx);
rc = ocxl_irq_set_handler(ctx, irq_id, irq_handler, irq_free, ev_ctx);
+ if (rc)
+ eventfd_ctx_put(ev_ctx);
break;
case OCXL_IOCTL_GET_METADATA:
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 8f786a225dcf..11530b4ec389 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -332,6 +332,22 @@ static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test,
return false;
}
+static int pci_endpoint_test_validate_xfer_params(struct device *dev,
+ struct pci_endpoint_test_xfer_param *param, size_t alignment)
+{
+ if (!param->size) {
+ dev_dbg(dev, "Data size is zero\n");
+ return -EINVAL;
+ }
+
+ if (param->size > SIZE_MAX - alignment) {
+ dev_dbg(dev, "Maximum transfer data size exceeded\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static bool pci_endpoint_test_copy(struct pci_endpoint_test *test,
unsigned long arg)
{
@@ -363,9 +379,11 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test,
return false;
}
+ err = pci_endpoint_test_validate_xfer_params(dev, &param, alignment);
+ if (err)
+ return false;
+
size = param.size;
- if (size > SIZE_MAX - alignment)
- goto err;
use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA);
if (use_dma)
@@ -497,9 +515,11 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test,
return false;
}
+ err = pci_endpoint_test_validate_xfer_params(dev, &param, alignment);
+ if (err)
+ return false;
+
size = param.size;
- if (size > SIZE_MAX - alignment)
- goto err;
use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA);
if (use_dma)
@@ -595,9 +615,11 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test,
return false;
}
+ err = pci_endpoint_test_validate_xfer_params(dev, &param, alignment);
+ if (err)
+ return false;
+
size = param.size;
- if (size > SIZE_MAX - alignment)
- goto err;
use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA);
if (use_dma)
diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h
index 9f9af77f8d2e..f1336f43d3bd 100644
--- a/drivers/misc/sgi-xp/xp.h
+++ b/drivers/misc/sgi-xp/xp.h
@@ -334,10 +334,6 @@ extern int (*xp_cpu_to_nasid) (int);
extern enum xp_retval (*xp_expand_memprotect) (unsigned long, unsigned long);
extern enum xp_retval (*xp_restrict_memprotect) (unsigned long, unsigned long);
-extern u64 xp_nofault_PIOR_target;
-extern int xp_nofault_PIOR(void *);
-extern int xp_error_PIOR(void);
-
extern struct device *xp;
extern enum xp_retval xp_init_uv(void);
extern void xp_exit_uv(void);
diff --git a/drivers/misc/vmw_vmci/vmci_queue_pair.c b/drivers/misc/vmw_vmci/vmci_queue_pair.c
index 8f2de1893245..e71068f7759b 100644
--- a/drivers/misc/vmw_vmci/vmci_queue_pair.c
+++ b/drivers/misc/vmw_vmci/vmci_queue_pair.c
@@ -324,7 +324,7 @@ static void *qp_alloc_queue(u64 size, u32 flags)
/*
* Copies from a given buffer or iovector to a VMCI Queue. Uses
- * kmap()/kunmap() to dynamically map/unmap required portions of the queue
+ * kmap_local_page() to dynamically map required portions of the queue
* by traversing the offset -> page translation structure for the queue.
* Assumes that offset + size does not wrap around in the queue.
*/
@@ -345,7 +345,7 @@ static int qp_memcpy_to_queue_iter(struct vmci_queue *queue,
size_t to_copy;
if (kernel_if->host)
- va = kmap(kernel_if->u.h.page[page_index]);
+ va = kmap_local_page(kernel_if->u.h.page[page_index]);
else
va = kernel_if->u.g.vas[page_index + 1];
/* Skip header. */
@@ -359,12 +359,12 @@ static int qp_memcpy_to_queue_iter(struct vmci_queue *queue,
if (!copy_from_iter_full((u8 *)va + page_offset, to_copy,
from)) {
if (kernel_if->host)
- kunmap(kernel_if->u.h.page[page_index]);
+ kunmap_local(va);
return VMCI_ERROR_INVALID_ARGS;
}
bytes_copied += to_copy;
if (kernel_if->host)
- kunmap(kernel_if->u.h.page[page_index]);
+ kunmap_local(va);
}
return VMCI_SUCCESS;
@@ -372,7 +372,7 @@ static int qp_memcpy_to_queue_iter(struct vmci_queue *queue,
/*
* Copies to a given buffer or iovector from a VMCI Queue. Uses
- * kmap()/kunmap() to dynamically map/unmap required portions of the queue
+ * kmap_local_page() to dynamically map required portions of the queue
* by traversing the offset -> page translation structure for the queue.
* Assumes that offset + size does not wrap around in the queue.
*/
@@ -393,7 +393,7 @@ static int qp_memcpy_from_queue_iter(struct iov_iter *to,
int err;
if (kernel_if->host)
- va = kmap(kernel_if->u.h.page[page_index]);
+ va = kmap_local_page(kernel_if->u.h.page[page_index]);
else
va = kernel_if->u.g.vas[page_index + 1];
/* Skip header. */
@@ -407,12 +407,12 @@ static int qp_memcpy_from_queue_iter(struct iov_iter *to,
err = copy_to_iter((u8 *)va + page_offset, to_copy, to);
if (err != to_copy) {
if (kernel_if->host)
- kunmap(kernel_if->u.h.page[page_index]);
+ kunmap_local(va);
return VMCI_ERROR_INVALID_ARGS;
}
bytes_copied += to_copy;
if (kernel_if->host)
- kunmap(kernel_if->u.h.page[page_index]);
+ kunmap_local(va);
}
return VMCI_SUCCESS;
diff --git a/drivers/misc/xilinx_sdfec.c b/drivers/misc/xilinx_sdfec.c
index d6e3c650bd11..cb9506f9cbd0 100644
--- a/drivers/misc/xilinx_sdfec.c
+++ b/drivers/misc/xilinx_sdfec.c
@@ -636,7 +636,7 @@ static int xsdfec_table_write(struct xsdfec_dev *xsdfec, u32 offset,
}
for (i = 0; i < nr_pages; i++) {
- addr = kmap(pages[i]);
+ addr = kmap_local_page(pages[i]);
do {
xsdfec_regwrite(xsdfec,
base_addr + ((offset + reg) *
@@ -645,6 +645,7 @@ static int xsdfec_table_write(struct xsdfec_dev *xsdfec, u32 offset,
reg++;
} while ((reg < len) &&
((reg * XSDFEC_REG_WIDTH_JUMP) % PAGE_SIZE));
+ kunmap_local(addr);
unpin_user_page(pages[i]);
}
return 0;
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 8393319b7782..18aa54460d36 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -1218,6 +1218,34 @@ int __get_mtd_device(struct mtd_info *mtd)
EXPORT_SYMBOL_GPL(__get_mtd_device);
/**
+ * of_get_mtd_device_by_node - obtain an MTD device associated with a given node
+ *
+ * @np: device tree node
+ */
+struct mtd_info *of_get_mtd_device_by_node(struct device_node *np)
+{
+ struct mtd_info *mtd = NULL;
+ struct mtd_info *tmp;
+ int err;
+
+ mutex_lock(&mtd_table_mutex);
+
+ err = -EPROBE_DEFER;
+ mtd_for_each_device(tmp) {
+ if (mtd_get_of_node(tmp) == np) {
+ mtd = tmp;
+ err = __get_mtd_device(mtd);
+ break;
+ }
+ }
+
+ mutex_unlock(&mtd_table_mutex);
+
+ return err ? ERR_PTR(err) : mtd;
+}
+EXPORT_SYMBOL_GPL(of_get_mtd_device_by_node);
+
+/**
* get_mtd_device_nm - obtain a validated handle for an MTD device by
* device name
* @name: MTD device name to open
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index d72d879a6d34..ec8a49c04003 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -21,6 +21,40 @@ config NVMEM_SYSFS
This interface is mostly used by userspace applications to
read/write directly into nvmem.
+# Devices
+
+config NVMEM_APPLE_EFUSES
+ tristate "Apple eFuse support"
+ depends on ARCH_APPLE || COMPILE_TEST
+ default ARCH_APPLE
+ help
+ Say y here to enable support for reading eFuses on Apple SoCs
+ such as the M1. These are e.g. used to store factory programmed
+ calibration data required for the PCIe or the USB-C PHY.
+
+ This driver can also be built as a module. If so, the module will
+ be called nvmem-apple-efuses.
+
+config NVMEM_BCM_OCOTP
+ tristate "Broadcom On-Chip OTP Controller support"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM
+ default ARCH_BCM_IPROC
+ help
+ Say y here to enable read/write access to the Broadcom OTP
+ controller.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-bcm-ocotp.
+
+config NVMEM_BRCM_NVRAM
+ tristate "Broadcom's NVRAM support"
+ depends on ARCH_BCM_5301X || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This driver provides support for Broadcom's NVRAM that can be accessed
+ using I/O mapping.
+
config NVMEM_IMX_IIM
tristate "i.MX IC Identification Module support"
depends on ARCH_MXC || COMPILE_TEST
@@ -52,7 +86,7 @@ config NVMEM_IMX_OCOTP_SCU
This is a driver for the SCU On-Chip OTP Controller (OCOTP)
available on i.MX8 SoCs.
-config JZ4780_EFUSE
+config NVMEM_JZ4780_EFUSE
tristate "JZ4780 EFUSE Memory Support"
depends on MACH_INGENIC || COMPILE_TEST
depends on HAS_IOMEM
@@ -64,6 +98,27 @@ config JZ4780_EFUSE
To compile this driver as a module, choose M here: the module
will be called nvmem_jz4780_efuse.
+config NVMEM_LAN9662_OTPC
+ tristate "Microchip LAN9662 OTP controller support"
+ depends on SOC_LAN966 || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This driver enables the OTP controller available on Microchip LAN9662
+ SoCs. It controls the access to the OTP memory connected to it.
+
+config NVMEM_LAYERSCAPE_SFP
+ tristate "Layerscape SFP (Security Fuse Processor) support"
+ depends on ARCH_LAYERSCAPE || COMPILE_TEST
+ depends on HAS_IOMEM
+ select REGMAP_MMIO
+ help
+ This driver provides support to read the eFuses on Freescale
+ Layerscape SoC's. For example, the vendor provides a per part
+ unique ID there.
+
+ This driver can also be built as a module. If so, the module
+ will be called layerscape-sfp.
+
config NVMEM_LPC18XX_EEPROM
tristate "NXP LPC18XX EEPROM Memory Support"
depends on ARCH_LPC18XX || COMPILE_TEST
@@ -84,19 +139,34 @@ config NVMEM_LPC18XX_OTP
To compile this driver as a module, choose M here: the module
will be called nvmem_lpc18xx_otp.
-config NVMEM_MXS_OCOTP
- tristate "Freescale MXS On-Chip OTP Memory Support"
- depends on ARCH_MXS || COMPILE_TEST
- depends on HAS_IOMEM
+config NVMEM_MESON_EFUSE
+ tristate "Amlogic Meson GX eFuse Support"
+ depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
help
- If you say Y here, you will get readonly access to the
- One Time Programmable memory pages that are stored
- on the Freescale i.MX23/i.MX28 processor.
+ This is a driver to retrieve specific values from the eFuse found on
+ the Amlogic Meson GX SoCs.
This driver can also be built as a module. If so, the module
- will be called nvmem-mxs-ocotp.
+ will be called nvmem_meson_efuse.
+
+config NVMEM_MESON_MX_EFUSE
+ tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
+ depends on ARCH_MESON || COMPILE_TEST
+ help
+ This is a driver to retrieve specific values from the eFuse found on
+ the Amlogic Meson6, Meson8 and Meson8b SoCs.
-config MTK_EFUSE
+ This driver can also be built as a module. If so, the module
+ will be called nvmem_meson_mx_efuse.
+
+config NVMEM_MICROCHIP_OTPC
+ tristate "Microchip OTPC support"
+ depends on ARCH_AT91 || COMPILE_TEST
+ help
+ This driver enable the OTP controller available on Microchip SAMA7G5
+ SoCs. It controlls the access to the OTP memory connected to it.
+
+config NVMEM_MTK_EFUSE
tristate "Mediatek SoCs EFUSE support"
depends on ARCH_MEDIATEK || COMPILE_TEST
depends on HAS_IOMEM
@@ -107,12 +177,17 @@ config MTK_EFUSE
This driver can also be built as a module. If so, the module
will be called efuse-mtk.
-config MICROCHIP_OTPC
- tristate "Microchip OTPC support"
- depends on ARCH_AT91 || COMPILE_TEST
+config NVMEM_MXS_OCOTP
+ tristate "Freescale MXS On-Chip OTP Memory Support"
+ depends on ARCH_MXS || COMPILE_TEST
+ depends on HAS_IOMEM
help
- This driver enable the OTP controller available on Microchip SAMA7G5
- SoCs. It controlls the access to the OTP memory connected to it.
+ If you say Y here, you will get readonly access to the
+ One Time Programmable memory pages that are stored
+ on the Freescale i.MX23/i.MX28 processor.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-mxs-ocotp.
config NVMEM_NINTENDO_OTP
tristate "Nintendo Wii and Wii U OTP Support"
@@ -126,7 +201,7 @@ config NVMEM_NINTENDO_OTP
This driver can also be built as a module. If so, the module
will be called nvmem-nintendo-otp.
-config QCOM_QFPROM
+config NVMEM_QCOM_QFPROM
tristate "QCOM QFPROM Support"
depends on ARCH_QCOM || COMPILE_TEST
depends on HAS_IOMEM
@@ -137,15 +212,23 @@ config QCOM_QFPROM
This driver can also be built as a module. If so, the module
will be called nvmem_qfprom.
-config NVMEM_SPMI_SDAM
- tristate "SPMI SDAM Support"
- depends on SPMI
+config NVMEM_RAVE_SP_EEPROM
+ tristate "Rave SP EEPROM Support"
+ depends on RAVE_SP_CORE
help
- This driver supports the Shared Direct Access Memory Module on
- Qualcomm Technologies, Inc. PMICs. It provides the clients
- an interface to read/write to the SDAM module's shared memory.
+ Say y here to enable Rave SP EEPROM support.
+
+config NVMEM_RMEM
+ tristate "Reserved Memory Based Driver Support"
+ depends on HAS_IOMEM
+ help
+ This driver maps reserved memory into an nvmem device. It might be
+ useful to expose information left by firmware in memory.
-config ROCKCHIP_EFUSE
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-rmem.
+
+config NVMEM_ROCKCHIP_EFUSE
tristate "Rockchip eFuse Support"
depends on ARCH_ROCKCHIP || COMPILE_TEST
depends on HAS_IOMEM
@@ -156,7 +239,7 @@ config ROCKCHIP_EFUSE
This driver can also be built as a module. If so, the module
will be called nvmem_rockchip_efuse.
-config ROCKCHIP_OTP
+config NVMEM_ROCKCHIP_OTP
tristate "Rockchip OTP controller support"
depends on ARCH_ROCKCHIP || COMPILE_TEST
depends on HAS_IOMEM
@@ -167,17 +250,45 @@ config ROCKCHIP_OTP
This driver can also be built as a module. If so, the module
will be called nvmem_rockchip_otp.
-config NVMEM_BCM_OCOTP
- tristate "Broadcom On-Chip OTP Controller support"
- depends on ARCH_BCM_IPROC || COMPILE_TEST
+config NVMEM_SC27XX_EFUSE
+ tristate "Spreadtrum SC27XX eFuse Support"
+ depends on MFD_SC27XX_PMIC || COMPILE_TEST
depends on HAS_IOMEM
- default ARCH_BCM_IPROC
help
- Say y here to enable read/write access to the Broadcom OTP
- controller.
+ This is a simple driver to dump specified values of Spreadtrum
+ SC27XX PMICs from eFuse.
This driver can also be built as a module. If so, the module
- will be called nvmem-bcm-ocotp.
+ will be called nvmem-sc27xx-efuse.
+
+config NVMEM_SNVS_LPGPR
+ tristate "Support for Low Power General Purpose Register"
+ depends on ARCH_MXC || COMPILE_TEST
+ help
+ This is a driver for Low Power General Purpose Register (LPGPR) available on
+ i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-snvs-lpgpr.
+
+config NVMEM_SPMI_SDAM
+ tristate "SPMI SDAM Support"
+ depends on SPMI
+ help
+ This driver supports the Shared Direct Access Memory Module on
+ Qualcomm Technologies, Inc. PMICs. It provides the clients
+ an interface to read/write to the SDAM module's shared memory.
+
+config NVMEM_SPRD_EFUSE
+ tristate "Spreadtrum SoC eFuse Support"
+ depends on ARCH_SPRD || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This is a simple driver to dump specified values of Spreadtrum
+ SoCs from eFuse.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-sprd-efuse.
config NVMEM_STM32_ROMEM
tristate "STMicroelectronics STM32 factory-programmed memory support"
@@ -189,6 +300,18 @@ config NVMEM_STM32_ROMEM
This driver can also be built as a module. If so, the module
will be called nvmem-stm32-romem.
+config NVMEM_SUNPLUS_OCOTP
+ tristate "Sunplus SoC OTP support"
+ depends on SOC_SP7021 || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This is a driver for the On-chip OTP controller (OCOTP) available
+ on Sunplus SoCs. It provides access to 128 bytes of one-time
+ programmable eFuse.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-sunplus-ocotp.
+
config NVMEM_SUNXI_SID
tristate "Allwinner SoCs SID support"
depends on ARCH_SUNXI
@@ -199,7 +322,20 @@ config NVMEM_SUNXI_SID
This driver can also be built as a module. If so, the module
will be called nvmem_sunxi_sid.
-config UNIPHIER_EFUSE
+config NVMEM_U_BOOT_ENV
+ tristate "U-Boot environment variables support"
+ depends on OF && MTD
+ select CRC32
+ help
+ U-Boot stores its setup as environment variables. This driver adds
+ support for verifying & exporting such data. It also exposes variables
+ as NVMEM cells so they can be referenced by other drivers.
+
+ Currently this drivers works only with env variables on top of MTD.
+
+ If compiled as module it will be called nvmem_u-boot-env.
+
+config NVMEM_UNIPHIER_EFUSE
tristate "UniPhier SoCs eFuse support"
depends on ARCH_UNIPHIER || COMPILE_TEST
depends on HAS_IOMEM
@@ -221,53 +357,6 @@ config NVMEM_VF610_OCOTP
This driver can also be build as a module. If so, the module will
be called nvmem-vf610-ocotp.
-config MESON_EFUSE
- tristate "Amlogic Meson GX eFuse Support"
- depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
- help
- This is a driver to retrieve specific values from the eFuse found on
- the Amlogic Meson GX SoCs.
-
- This driver can also be built as a module. If so, the module
- will be called nvmem_meson_efuse.
-
-config MESON_MX_EFUSE
- tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
- depends on ARCH_MESON || COMPILE_TEST
- help
- This is a driver to retrieve specific values from the eFuse found on
- the Amlogic Meson6, Meson8 and Meson8b SoCs.
-
- This driver can also be built as a module. If so, the module
- will be called nvmem_meson_mx_efuse.
-
-config NVMEM_SNVS_LPGPR
- tristate "Support for Low Power General Purpose Register"
- depends on ARCH_MXC || COMPILE_TEST
- help
- This is a driver for Low Power General Purpose Register (LPGPR) available on
- i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip.
-
- This driver can also be built as a module. If so, the module
- will be called nvmem-snvs-lpgpr.
-
-config RAVE_SP_EEPROM
- tristate "Rave SP EEPROM Support"
- depends on RAVE_SP_CORE
- help
- Say y here to enable Rave SP EEPROM support.
-
-config SC27XX_EFUSE
- tristate "Spreadtrum SC27XX eFuse Support"
- depends on MFD_SC27XX_PMIC || COMPILE_TEST
- depends on HAS_IOMEM
- help
- This is a simple driver to dump specified values of Spreadtrum
- SC27XX PMICs from eFuse.
-
- This driver can also be built as a module. If so, the module
- will be called nvmem-sc27xx-efuse.
-
config NVMEM_ZYNQMP
bool "Xilinx ZYNQMP SoC nvmem firmware support"
depends on ARCH_ZYNQMP
@@ -278,70 +367,4 @@ config NVMEM_ZYNQMP
If sure, say yes. If unsure, say no.
-config SPRD_EFUSE
- tristate "Spreadtrum SoC eFuse Support"
- depends on ARCH_SPRD || COMPILE_TEST
- depends on HAS_IOMEM
- help
- This is a simple driver to dump specified values of Spreadtrum
- SoCs from eFuse.
-
- This driver can also be built as a module. If so, the module
- will be called nvmem-sprd-efuse.
-
-config NVMEM_RMEM
- tristate "Reserved Memory Based Driver Support"
- depends on HAS_IOMEM
- help
- This driver maps reserved memory into an nvmem device. It might be
- useful to expose information left by firmware in memory.
-
- This driver can also be built as a module. If so, the module
- will be called nvmem-rmem.
-
-config NVMEM_BRCM_NVRAM
- tristate "Broadcom's NVRAM support"
- depends on ARCH_BCM_5301X || COMPILE_TEST
- depends on HAS_IOMEM
- help
- This driver provides support for Broadcom's NVRAM that can be accessed
- using I/O mapping.
-
-config NVMEM_LAYERSCAPE_SFP
- tristate "Layerscape SFP (Security Fuse Processor) support"
- depends on ARCH_LAYERSCAPE || COMPILE_TEST
- depends on HAS_IOMEM
- select REGMAP_MMIO
- help
- This driver provides support to read the eFuses on Freescale
- Layerscape SoC's. For example, the vendor provides a per part
- unique ID there.
-
- This driver can also be built as a module. If so, the module
- will be called layerscape-sfp.
-
-config NVMEM_SUNPLUS_OCOTP
- tristate "Sunplus SoC OTP support"
- depends on SOC_SP7021 || COMPILE_TEST
- depends on HAS_IOMEM
- help
- This is a driver for the On-chip OTP controller (OCOTP) available
- on Sunplus SoCs. It provides access to 128 bytes of one-time
- programmable eFuse.
-
- This driver can also be built as a module. If so, the module
- will be called nvmem-sunplus-ocotp.
-
-config NVMEM_APPLE_EFUSES
- tristate "Apple eFuse support"
- depends on ARCH_APPLE || COMPILE_TEST
- default ARCH_APPLE
- help
- Say y here to enable support for reading eFuses on Apple SoCs
- such as the M1. These are e.g. used to store factory programmed
- calibration data required for the PCIe or the USB-C PHY.
-
- This driver can also be built as a module. If so, the module will
- be called nvmem-apple-efuses.
-
endif
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index c710b64f9fe4..fa80fe17e567 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -7,65 +7,69 @@ obj-$(CONFIG_NVMEM) += nvmem_core.o
nvmem_core-y := core.o
# Devices
-obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o
-nvmem-bcm-ocotp-y := bcm-ocotp.o
-obj-$(CONFIG_NVMEM_IMX_IIM) += nvmem-imx-iim.o
-nvmem-imx-iim-y := imx-iim.o
-obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o
-nvmem-imx-ocotp-y := imx-ocotp.o
+obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o
+nvmem-apple-efuses-y := apple-efuses.o
+obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o
+nvmem-bcm-ocotp-y := bcm-ocotp.o
+obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o
+nvmem_brcm_nvram-y := brcm_nvram.o
+obj-$(CONFIG_NVMEM_IMX_IIM) += nvmem-imx-iim.o
+nvmem-imx-iim-y := imx-iim.o
+obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o
+nvmem-imx-ocotp-y := imx-ocotp.o
obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU) += nvmem-imx-ocotp-scu.o
-nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o
-obj-$(CONFIG_JZ4780_EFUSE) += nvmem_jz4780_efuse.o
-nvmem_jz4780_efuse-y := jz4780-efuse.o
+nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o
+obj-$(CONFIG_NVMEM_JZ4780_EFUSE) += nvmem_jz4780_efuse.o
+nvmem_jz4780_efuse-y := jz4780-efuse.o
+obj-$(CONFIG_NVMEM_LAN9662_OTPC) += nvmem-lan9662-otpc.o
+nvmem-lan9662-otpc-y := lan9662-otpc.o
+obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP) += nvmem-layerscape-sfp.o
+nvmem-layerscape-sfp-y := layerscape-sfp.o
obj-$(CONFIG_NVMEM_LPC18XX_EEPROM) += nvmem_lpc18xx_eeprom.o
-nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o
-obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o
-nvmem_lpc18xx_otp-y := lpc18xx_otp.o
-obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o
-nvmem-mxs-ocotp-y := mxs-ocotp.o
+nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o
+obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o
+nvmem_lpc18xx_otp-y := lpc18xx_otp.o
+obj-$(CONFIG_NVMEM_MESON_EFUSE) += nvmem_meson_efuse.o
+nvmem_meson_efuse-y := meson-efuse.o
+obj-$(CONFIG_NVMEM_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o
+nvmem_meson_mx_efuse-y := meson-mx-efuse.o
+obj-$(CONFIG_NVMEM_MICROCHIP_OTPC) += nvmem-microchip-otpc.o
+nvmem-microchip-otpc-y := microchip-otpc.o
+obj-$(CONFIG_NVMEM_MTK_EFUSE) += nvmem_mtk-efuse.o
+nvmem_mtk-efuse-y := mtk-efuse.o
+obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o
+nvmem-mxs-ocotp-y := mxs-ocotp.o
obj-$(CONFIG_NVMEM_NINTENDO_OTP) += nvmem-nintendo-otp.o
-nvmem-nintendo-otp-y := nintendo-otp.o
-obj-$(CONFIG_MTK_EFUSE) += nvmem_mtk-efuse.o
-nvmem_mtk-efuse-y := mtk-efuse.o
-obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o
-nvmem_qfprom-y := qfprom.o
-obj-$(CONFIG_NVMEM_SPMI_SDAM) += nvmem_qcom-spmi-sdam.o
-nvmem_qcom-spmi-sdam-y += qcom-spmi-sdam.o
-obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o
-nvmem_rockchip_efuse-y := rockchip-efuse.o
-obj-$(CONFIG_ROCKCHIP_OTP) += nvmem-rockchip-otp.o
-nvmem-rockchip-otp-y := rockchip-otp.o
-obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o
-nvmem_stm32_romem-y := stm32-romem.o
-obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o
-nvmem_sunxi_sid-y := sunxi_sid.o
-obj-$(CONFIG_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o
-nvmem-uniphier-efuse-y := uniphier-efuse.o
-obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o
-nvmem-vf610-ocotp-y := vf610-ocotp.o
-obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o
-nvmem_meson_efuse-y := meson-efuse.o
-obj-$(CONFIG_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o
-nvmem_meson_mx_efuse-y := meson-mx-efuse.o
-obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o
-nvmem_snvs_lpgpr-y := snvs_lpgpr.o
-obj-$(CONFIG_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o
-nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o
-obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o
-nvmem-sc27xx-efuse-y := sc27xx-efuse.o
-obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o
-nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o
-obj-$(CONFIG_SPRD_EFUSE) += nvmem_sprd_efuse.o
-nvmem_sprd_efuse-y := sprd-efuse.o
-obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o
-nvmem-rmem-y := rmem.o
-obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o
-nvmem_brcm_nvram-y := brcm_nvram.o
-obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP) += nvmem-layerscape-sfp.o
-nvmem-layerscape-sfp-y := layerscape-sfp.o
+nvmem-nintendo-otp-y := nintendo-otp.o
+obj-$(CONFIG_NVMEM_QCOM_QFPROM) += nvmem_qfprom.o
+nvmem_qfprom-y := qfprom.o
+obj-$(CONFIG_NVMEM_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o
+nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o
+obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o
+nvmem-rmem-y := rmem.o
+obj-$(CONFIG_NVMEM_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o
+nvmem_rockchip_efuse-y := rockchip-efuse.o
+obj-$(CONFIG_NVMEM_ROCKCHIP_OTP) += nvmem-rockchip-otp.o
+nvmem-rockchip-otp-y := rockchip-otp.o
+obj-$(CONFIG_NVMEM_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o
+nvmem-sc27xx-efuse-y := sc27xx-efuse.o
+obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o
+nvmem_snvs_lpgpr-y := snvs_lpgpr.o
+obj-$(CONFIG_NVMEM_SPMI_SDAM) += nvmem_qcom-spmi-sdam.o
+nvmem_qcom-spmi-sdam-y += qcom-spmi-sdam.o
+obj-$(CONFIG_NVMEM_SPRD_EFUSE) += nvmem_sprd_efuse.o
+nvmem_sprd_efuse-y := sprd-efuse.o
+obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o
+nvmem_stm32_romem-y := stm32-romem.o
obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP) += nvmem_sunplus_ocotp.o
-nvmem_sunplus_ocotp-y := sunplus-ocotp.o
-obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o
-nvmem-apple-efuses-y := apple-efuses.o
-obj-$(CONFIG_MICROCHIP_OTPC) += nvmem-microchip-otpc.o
-nvmem-microchip-otpc-y := microchip-otpc.o
+nvmem_sunplus_ocotp-y := sunplus-ocotp.o
+obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o
+nvmem_sunxi_sid-y := sunxi_sid.o
+obj-$(CONFIG_NVMEM_U_BOOT_ENV) += nvmem_u-boot-env.o
+nvmem_u-boot-env-y := u-boot-env.o
+obj-$(CONFIG_NVMEM_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o
+nvmem-uniphier-efuse-y := uniphier-efuse.o
+obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o
+nvmem-vf610-ocotp-y := vf610-ocotp.o
+obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o
+nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o
diff --git a/drivers/nvmem/brcm_nvram.c b/drivers/nvmem/brcm_nvram.c
index 450b927691c3..4441daa20965 100644
--- a/drivers/nvmem/brcm_nvram.c
+++ b/drivers/nvmem/brcm_nvram.c
@@ -96,7 +96,7 @@ static int brcm_nvram_parse(struct brcm_nvram *priv)
len = le32_to_cpu(header.len);
- data = kcalloc(1, len, GFP_KERNEL);
+ data = kzalloc(len, GFP_KERNEL);
memcpy_fromio(data, priv->base, len);
data[len - 1] = '\0';
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 1e3c754efd0d..321d7d63e068 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -810,18 +810,24 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
switch (config->id) {
case NVMEM_DEVID_NONE:
- dev_set_name(&nvmem->dev, "%s", config->name);
+ rval = dev_set_name(&nvmem->dev, "%s", config->name);
break;
case NVMEM_DEVID_AUTO:
- dev_set_name(&nvmem->dev, "%s%d", config->name, nvmem->id);
+ rval = dev_set_name(&nvmem->dev, "%s%d", config->name, nvmem->id);
break;
default:
- dev_set_name(&nvmem->dev, "%s%d",
+ rval = dev_set_name(&nvmem->dev, "%s%d",
config->name ? : "nvmem",
config->name ? config->id : nvmem->id);
break;
}
+ if (rval) {
+ ida_free(&nvmem_ida, nvmem->id);
+ kfree(nvmem);
+ return ERR_PTR(rval);
+ }
+
nvmem->read_only = device_property_present(config->dev, "read-only") ||
config->read_only || !nvmem->reg_write;
@@ -829,21 +835,18 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
nvmem->dev.groups = nvmem_dev_groups;
#endif
- if (nvmem->nkeepout) {
- rval = nvmem_validate_keepouts(nvmem);
- if (rval) {
- ida_free(&nvmem_ida, nvmem->id);
- kfree(nvmem);
- return ERR_PTR(rval);
- }
- }
-
dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
rval = device_register(&nvmem->dev);
if (rval)
goto err_put_device;
+ if (nvmem->nkeepout) {
+ rval = nvmem_validate_keepouts(nvmem);
+ if (rval)
+ goto err_device_del;
+ }
+
if (config->compat) {
rval = nvmem_sysfs_setup_compat(nvmem, config);
if (rval)
diff --git a/drivers/nvmem/lan9662-otpc.c b/drivers/nvmem/lan9662-otpc.c
new file mode 100644
index 000000000000..f6732fd216d8
--- /dev/null
+++ b/drivers/nvmem/lan9662-otpc.c
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define OTP_OTP_PWR_DN(t) (t + 0x00)
+#define OTP_OTP_PWR_DN_OTP_PWRDN_N BIT(0)
+#define OTP_OTP_ADDR_HI(t) (t + 0x04)
+#define OTP_OTP_ADDR_LO(t) (t + 0x08)
+#define OTP_OTP_PRGM_DATA(t) (t + 0x10)
+#define OTP_OTP_PRGM_MODE(t) (t + 0x14)
+#define OTP_OTP_PRGM_MODE_OTP_PGM_MODE_BYTE BIT(0)
+#define OTP_OTP_RD_DATA(t) (t + 0x18)
+#define OTP_OTP_FUNC_CMD(t) (t + 0x20)
+#define OTP_OTP_FUNC_CMD_OTP_PROGRAM BIT(1)
+#define OTP_OTP_FUNC_CMD_OTP_READ BIT(0)
+#define OTP_OTP_CMD_GO(t) (t + 0x28)
+#define OTP_OTP_CMD_GO_OTP_GO BIT(0)
+#define OTP_OTP_PASS_FAIL(t) (t + 0x2c)
+#define OTP_OTP_PASS_FAIL_OTP_READ_PROHIBITED BIT(3)
+#define OTP_OTP_PASS_FAIL_OTP_WRITE_PROHIBITED BIT(2)
+#define OTP_OTP_PASS_FAIL_OTP_FAIL BIT(0)
+#define OTP_OTP_STATUS(t) (t + 0x30)
+#define OTP_OTP_STATUS_OTP_CPUMPEN BIT(1)
+#define OTP_OTP_STATUS_OTP_BUSY BIT(0)
+
+#define OTP_MEM_SIZE 8192
+#define OTP_SLEEP_US 10
+#define OTP_TIMEOUT_US 500000
+
+struct lan9662_otp {
+ struct device *dev;
+ void __iomem *base;
+};
+
+static bool lan9662_otp_wait_flag_clear(void __iomem *reg, u32 flag)
+{
+ u32 val;
+
+ return readl_poll_timeout(reg, val, !(val & flag),
+ OTP_SLEEP_US, OTP_TIMEOUT_US);
+}
+
+static int lan9662_otp_power(struct lan9662_otp *otp, bool up)
+{
+ void __iomem *pwrdn = OTP_OTP_PWR_DN(otp->base);
+
+ if (up) {
+ writel(readl(pwrdn) & ~OTP_OTP_PWR_DN_OTP_PWRDN_N, pwrdn);
+ if (lan9662_otp_wait_flag_clear(OTP_OTP_STATUS(otp->base),
+ OTP_OTP_STATUS_OTP_CPUMPEN))
+ return -ETIMEDOUT;
+ } else {
+ writel(readl(pwrdn) | OTP_OTP_PWR_DN_OTP_PWRDN_N, pwrdn);
+ }
+
+ return 0;
+}
+
+static int lan9662_otp_execute(struct lan9662_otp *otp)
+{
+ if (lan9662_otp_wait_flag_clear(OTP_OTP_CMD_GO(otp->base),
+ OTP_OTP_CMD_GO_OTP_GO))
+ return -ETIMEDOUT;
+
+ if (lan9662_otp_wait_flag_clear(OTP_OTP_STATUS(otp->base),
+ OTP_OTP_STATUS_OTP_BUSY))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static void lan9662_otp_set_address(struct lan9662_otp *otp, u32 offset)
+{
+ writel(0xff & (offset >> 8), OTP_OTP_ADDR_HI(otp->base));
+ writel(0xff & offset, OTP_OTP_ADDR_LO(otp->base));
+}
+
+static int lan9662_otp_read_byte(struct lan9662_otp *otp, u32 offset, u8 *dst)
+{
+ u32 pass;
+ int rc;
+
+ lan9662_otp_set_address(otp, offset);
+ writel(OTP_OTP_FUNC_CMD_OTP_READ, OTP_OTP_FUNC_CMD(otp->base));
+ writel(OTP_OTP_CMD_GO_OTP_GO, OTP_OTP_CMD_GO(otp->base));
+ rc = lan9662_otp_execute(otp);
+ if (!rc) {
+ pass = readl(OTP_OTP_PASS_FAIL(otp->base));
+ if (pass & OTP_OTP_PASS_FAIL_OTP_READ_PROHIBITED)
+ return -EACCES;
+ *dst = (u8) readl(OTP_OTP_RD_DATA(otp->base));
+ }
+ return rc;
+}
+
+static int lan9662_otp_write_byte(struct lan9662_otp *otp, u32 offset, u8 data)
+{
+ u32 pass;
+ int rc;
+
+ lan9662_otp_set_address(otp, offset);
+ writel(OTP_OTP_PRGM_MODE_OTP_PGM_MODE_BYTE, OTP_OTP_PRGM_MODE(otp->base));
+ writel(data, OTP_OTP_PRGM_DATA(otp->base));
+ writel(OTP_OTP_FUNC_CMD_OTP_PROGRAM, OTP_OTP_FUNC_CMD(otp->base));
+ writel(OTP_OTP_CMD_GO_OTP_GO, OTP_OTP_CMD_GO(otp->base));
+
+ rc = lan9662_otp_execute(otp);
+ if (!rc) {
+ pass = readl(OTP_OTP_PASS_FAIL(otp->base));
+ if (pass & OTP_OTP_PASS_FAIL_OTP_WRITE_PROHIBITED)
+ return -EACCES;
+ if (pass & OTP_OTP_PASS_FAIL_OTP_FAIL)
+ return -EIO;
+ }
+ return rc;
+}
+
+static int lan9662_otp_read(void *context, unsigned int offset,
+ void *_val, size_t bytes)
+{
+ struct lan9662_otp *otp = context;
+ u8 *val = _val;
+ uint8_t data;
+ int i, rc = 0;
+
+ lan9662_otp_power(otp, true);
+ for (i = 0; i < bytes; i++) {
+ rc = lan9662_otp_read_byte(otp, offset + i, &data);
+ if (rc < 0)
+ break;
+ *val++ = data;
+ }
+ lan9662_otp_power(otp, false);
+
+ return rc;
+}
+
+static int lan9662_otp_write(void *context, unsigned int offset,
+ void *_val, size_t bytes)
+{
+ struct lan9662_otp *otp = context;
+ u8 *val = _val;
+ u8 data, newdata;
+ int i, rc = 0;
+
+ lan9662_otp_power(otp, true);
+ for (i = 0; i < bytes; i++) {
+ /* Skip zero bytes */
+ if (val[i]) {
+ rc = lan9662_otp_read_byte(otp, offset + i, &data);
+ if (rc < 0)
+ break;
+
+ newdata = data | val[i];
+ if (newdata == data)
+ continue;
+
+ rc = lan9662_otp_write_byte(otp, offset + i,
+ newdata);
+ if (rc < 0)
+ break;
+ }
+ }
+ lan9662_otp_power(otp, false);
+
+ return rc;
+}
+
+static struct nvmem_config otp_config = {
+ .name = "lan9662-otp",
+ .stride = 1,
+ .word_size = 1,
+ .reg_read = lan9662_otp_read,
+ .reg_write = lan9662_otp_write,
+ .size = OTP_MEM_SIZE,
+};
+
+static int lan9662_otp_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct nvmem_device *nvmem;
+ struct lan9662_otp *otp;
+
+ otp = devm_kzalloc(&pdev->dev, sizeof(*otp), GFP_KERNEL);
+ if (!otp)
+ return -ENOMEM;
+
+ otp->dev = dev;
+ otp->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(otp->base))
+ return PTR_ERR(otp->base);
+
+ otp_config.priv = otp;
+ otp_config.dev = dev;
+
+ nvmem = devm_nvmem_register(dev, &otp_config);
+
+ return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id lan9662_otp_match[] = {
+ { .compatible = "microchip,lan9662-otp", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, lan9662_otp_match);
+
+static struct platform_driver lan9662_otp_driver = {
+ .probe = lan9662_otp_probe,
+ .driver = {
+ .name = "lan9662-otp",
+ .of_match_table = lan9662_otp_match,
+ },
+};
+module_platform_driver(lan9662_otp_driver);
+
+MODULE_AUTHOR("Horatiu Vultur <horatiu.vultur@microchip.com>");
+MODULE_DESCRIPTION("lan9662 OTP driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
new file mode 100644
index 000000000000..8e72d1bbd649
--- /dev/null
+++ b/drivers/nvmem/u-boot-env.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/crc32.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+enum u_boot_env_format {
+ U_BOOT_FORMAT_SINGLE,
+ U_BOOT_FORMAT_REDUNDANT,
+};
+
+struct u_boot_env {
+ struct device *dev;
+ enum u_boot_env_format format;
+
+ struct mtd_info *mtd;
+
+ /* Cells */
+ struct nvmem_cell_info *cells;
+ int ncells;
+};
+
+struct u_boot_env_image_single {
+ __le32 crc32;
+ uint8_t data[];
+} __packed;
+
+struct u_boot_env_image_redundant {
+ __le32 crc32;
+ u8 mark;
+ uint8_t data[];
+} __packed;
+
+static int u_boot_env_read(void *context, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct u_boot_env *priv = context;
+ struct device *dev = priv->dev;
+ size_t bytes_read;
+ int err;
+
+ err = mtd_read(priv->mtd, offset, bytes, &bytes_read, val);
+ if (err && !mtd_is_bitflip(err)) {
+ dev_err(dev, "Failed to read from mtd: %d\n", err);
+ return err;
+ }
+
+ if (bytes_read != bytes) {
+ dev_err(dev, "Failed to read %zu bytes\n", bytes);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
+ size_t data_offset, size_t data_len)
+{
+ struct device *dev = priv->dev;
+ char *data = buf + data_offset;
+ char *var, *value, *eq;
+ int idx;
+
+ priv->ncells = 0;
+ for (var = data; var < data + data_len && *var; var += strlen(var) + 1)
+ priv->ncells++;
+
+ priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL);
+ if (!priv->cells)
+ return -ENOMEM;
+
+ for (var = data, idx = 0;
+ var < data + data_len && *var;
+ var = value + strlen(value) + 1, idx++) {
+ eq = strchr(var, '=');
+ if (!eq)
+ break;
+ *eq = '\0';
+ value = eq + 1;
+
+ priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL);
+ if (!priv->cells[idx].name)
+ return -ENOMEM;
+ priv->cells[idx].offset = data_offset + value - data;
+ priv->cells[idx].bytes = strlen(value);
+ priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
+ }
+
+ if (WARN_ON(idx != priv->ncells))
+ priv->ncells = idx;
+
+ return 0;
+}
+
+static int u_boot_env_parse(struct u_boot_env *priv)
+{
+ struct device *dev = priv->dev;
+ size_t crc32_data_offset;
+ size_t crc32_data_len;
+ size_t crc32_offset;
+ size_t data_offset;
+ size_t data_len;
+ uint32_t crc32;
+ uint32_t calc;
+ size_t bytes;
+ uint8_t *buf;
+ int err;
+
+ buf = kcalloc(1, priv->mtd->size, GFP_KERNEL);
+ if (!buf) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ err = mtd_read(priv->mtd, 0, priv->mtd->size, &bytes, buf);
+ if ((err && !mtd_is_bitflip(err)) || bytes != priv->mtd->size) {
+ dev_err(dev, "Failed to read from mtd: %d\n", err);
+ goto err_kfree;
+ }
+
+ switch (priv->format) {
+ case U_BOOT_FORMAT_SINGLE:
+ crc32_offset = offsetof(struct u_boot_env_image_single, crc32);
+ crc32_data_offset = offsetof(struct u_boot_env_image_single, data);
+ data_offset = offsetof(struct u_boot_env_image_single, data);
+ break;
+ case U_BOOT_FORMAT_REDUNDANT:
+ crc32_offset = offsetof(struct u_boot_env_image_redundant, crc32);
+ crc32_data_offset = offsetof(struct u_boot_env_image_redundant, mark);
+ data_offset = offsetof(struct u_boot_env_image_redundant, data);
+ break;
+ }
+ crc32 = le32_to_cpu(*(__le32 *)(buf + crc32_offset));
+ crc32_data_len = priv->mtd->size - crc32_data_offset;
+ data_len = priv->mtd->size - data_offset;
+
+ calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L;
+ if (calc != crc32) {
+ dev_err(dev, "Invalid calculated CRC32: 0x%08x (expected: 0x%08x)\n", calc, crc32);
+ err = -EINVAL;
+ goto err_kfree;
+ }
+
+ buf[priv->mtd->size - 1] = '\0';
+ err = u_boot_env_add_cells(priv, buf, data_offset, data_len);
+ if (err)
+ dev_err(dev, "Failed to add cells: %d\n", err);
+
+err_kfree:
+ kfree(buf);
+err_out:
+ return err;
+}
+
+static int u_boot_env_probe(struct platform_device *pdev)
+{
+ struct nvmem_config config = {
+ .name = "u-boot-env",
+ .reg_read = u_boot_env_read,
+ };
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct u_boot_env *priv;
+ int err;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ priv->dev = dev;
+
+ priv->format = (uintptr_t)of_device_get_match_data(dev);
+
+ priv->mtd = of_get_mtd_device_by_node(np);
+ if (IS_ERR(priv->mtd)) {
+ dev_err_probe(dev, PTR_ERR(priv->mtd), "Failed to get %pOF MTD\n", np);
+ return PTR_ERR(priv->mtd);
+ }
+
+ err = u_boot_env_parse(priv);
+ if (err)
+ return err;
+
+ config.dev = dev;
+ config.cells = priv->cells;
+ config.ncells = priv->ncells;
+ config.priv = priv;
+ config.size = priv->mtd->size;
+
+ return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
+}
+
+static const struct of_device_id u_boot_env_of_match_table[] = {
+ { .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, },
+ { .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+ { .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+ {},
+};
+
+static struct platform_driver u_boot_env_driver = {
+ .probe = u_boot_env_probe,
+ .driver = {
+ .name = "u_boot_env",
+ .of_match_table = u_boot_env_of_match_table,
+ },
+};
+module_platform_driver(u_boot_env_driver);
+
+MODULE_AUTHOR("Rafał Miłecki");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, u_boot_env_of_match_table);
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index eda4ded4d5e5..7c45927e2131 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -2604,6 +2604,7 @@ enum parport_pc_pci_cards {
oxsemi_pcie_pport,
aks_0100,
mobility_pp,
+ netmos_9900,
netmos_9705,
netmos_9715,
netmos_9755,
@@ -2665,6 +2666,7 @@ static struct parport_pc_pci {
/* oxsemi_pcie_pport */ { 1, { { 0, 1 }, } },
/* aks_0100 */ { 1, { { 0, -1 }, } },
/* mobility_pp */ { 1, { { 0, 1 }, } },
+ /* netmos_9900 */ { 1, { { 0, -1 }, } },
/* The netmos entries below are untested */
/* netmos_9705 */ { 1, { { 0, -1 }, } },
@@ -2746,6 +2748,8 @@ static const struct pci_device_id parport_pc_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 },
{ 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp },
/* NetMos communication controllers */
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
+ 0xA000, 0x2000, 0, 0, netmos_9900 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9715,
diff --git a/drivers/slimbus/Kconfig b/drivers/slimbus/Kconfig
index 1235b7dc8496..2ed821f75816 100644
--- a/drivers/slimbus/Kconfig
+++ b/drivers/slimbus/Kconfig
@@ -22,7 +22,8 @@ config SLIM_QCOM_CTRL
config SLIM_QCOM_NGD_CTRL
tristate "Qualcomm SLIMbus Satellite Non-Generic Device Component"
- depends on HAS_IOMEM && DMA_ENGINE && NET && QCOM_RPROC_COMMON
+ depends on HAS_IOMEM && DMA_ENGINE && NET
+ depends on QCOM_RPROC_COMMON || COMPILE_TEST
depends on ARCH_QCOM || COMPILE_TEST
select QCOM_QMI_HELPERS
select QCOM_PDR_HELPERS
diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index 0aa8408464ad..76c5e446d243 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -1470,7 +1470,13 @@ static int of_qcom_slim_ngd_register(struct device *parent,
ngd->pdev->dev.of_node = node;
ctrl->ngd = ngd;
- platform_device_add(ngd->pdev);
+ ret = platform_device_add(ngd->pdev);
+ if (ret) {
+ platform_device_put(ngd->pdev);
+ kfree(ngd);
+ of_node_put(node);
+ return ret;
+ }
ngd->base = ctrl->base + ngd->id * data->offset +
(ngd->id - 1) * data->size;
@@ -1543,10 +1549,8 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
ret = devm_request_irq(dev, ret, qcom_slim_ngd_interrupt,
IRQF_TRIGGER_HIGH, "slim-ngd", ctrl);
- if (ret) {
- dev_err(&pdev->dev, "request IRQ failed\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret, "request IRQ failed\n");
ctrl->nb.notifier_call = qcom_slim_ngd_ssr_notify;
ctrl->notifier = qcom_register_ssr_notifier("lpass", &ctrl->nb);
@@ -1575,18 +1579,27 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
ctrl->pdr = pdr_handle_alloc(slim_pd_status, ctrl);
if (IS_ERR(ctrl->pdr)) {
- dev_err(dev, "Failed to init PDR handle\n");
- return PTR_ERR(ctrl->pdr);
+ ret = dev_err_probe(dev, PTR_ERR(ctrl->pdr),
+ "Failed to init PDR handle\n");
+ goto err_pdr_alloc;
}
pds = pdr_add_lookup(ctrl->pdr, "avs/audio", "msm/adsp/audio_pd");
if (IS_ERR(pds) && PTR_ERR(pds) != -EALREADY) {
- dev_err(dev, "pdr add lookup failed: %d\n", ret);
- return PTR_ERR(pds);
+ ret = dev_err_probe(dev, PTR_ERR(pds), "pdr add lookup failed\n");
+ goto err_pdr_lookup;
}
platform_driver_register(&qcom_slim_ngd_driver);
return of_qcom_slim_ngd_register(dev, ctrl);
+
+err_pdr_alloc:
+ qcom_unregister_ssr_notifier(ctrl->notifier, &ctrl->nb);
+
+err_pdr_lookup:
+ pdr_handle_release(ctrl->pdr);
+
+ return ret;
}
static int qcom_slim_ngd_ctrl_remove(struct platform_device *pdev)
diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index 73e63920b1b9..40d0cc600cae 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -77,7 +77,7 @@ config MTK_MMSYS
config MTK_SVS
tristate "MediaTek Smart Voltage Scaling(SVS)"
- depends on MTK_EFUSE && NVMEM
+ depends on NVMEM_MTK_EFUSE && NVMEM
help
The Smart Voltage Scaling(SVS) engine is a piece of hardware
which has several controllers(banks) for calculating suitable
diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 2113be40b5a9..2cf3203b2397 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -91,7 +91,7 @@ enum pmic_arb_channel {
/* Maximum number of support PMIC peripherals */
#define PMIC_ARB_MAX_PERIPHS 512
-#define PMIC_ARB_TIMEOUT_US 100
+#define PMIC_ARB_TIMEOUT_US 1000
#define PMIC_ARB_MAX_TRANS_BYTES (8)
#define PMIC_ARB_APID_MASK 0xFF
@@ -590,23 +590,16 @@ static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id)
u8 per = ppid & 0xFF;
u8 irq_mask = BIT(id);
+ dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d sid=0x%x per=0x%x irq=%d\n",
+ __func__, apid, sid, per, id);
writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, apid));
-
- if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
- (per << 8) + QPNPINT_REG_LATCHED_CLR, &irq_mask, 1))
- dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n",
- irq_mask, ppid);
-
- if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
- (per << 8) + QPNPINT_REG_EN_CLR, &irq_mask, 1))
- dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n",
- irq_mask, ppid);
}
-static void periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
+static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
{
unsigned int irq;
u32 status, id;
+ int handled = 0;
u8 sid = (pmic_arb->apid_data[apid].ppid >> 8) & 0xF;
u8 per = pmic_arb->apid_data[apid].ppid & 0xFF;
@@ -621,7 +614,10 @@ static void periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
continue;
}
generic_handle_irq(irq);
+ handled++;
}
+
+ return handled;
}
static void pmic_arb_chained_irq(struct irq_desc *desc)
@@ -629,28 +625,66 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
struct spmi_pmic_arb *pmic_arb = irq_desc_get_handler_data(desc);
const struct pmic_arb_ver_ops *ver_ops = pmic_arb->ver_ops;
struct irq_chip *chip = irq_desc_get_chip(desc);
- int first = pmic_arb->min_apid >> 5;
- int last = pmic_arb->max_apid >> 5;
+ int first = pmic_arb->min_apid;
+ int last = pmic_arb->max_apid;
u8 ee = pmic_arb->ee;
- u32 status, enable;
+ u32 status, enable, handled = 0;
int i, id, apid;
+ /* status based dispatch */
+ bool acc_valid = false;
+ u32 irq_status = 0;
chained_irq_enter(chip, desc);
- for (i = first; i <= last; ++i) {
+ for (i = first >> 5; i <= last >> 5; ++i) {
status = readl_relaxed(
ver_ops->owner_acc_status(pmic_arb, ee, i));
+ if (status)
+ acc_valid = true;
+
while (status) {
id = ffs(status) - 1;
status &= ~BIT(id);
apid = id + i * 32;
+ if (apid < first || apid > last) {
+ WARN_ONCE(true, "spurious spmi irq received for apid=%d\n",
+ apid);
+ continue;
+ }
enable = readl_relaxed(
ver_ops->acc_enable(pmic_arb, apid));
if (enable & SPMI_PIC_ACC_ENABLE_BIT)
- periph_interrupt(pmic_arb, apid);
+ if (periph_interrupt(pmic_arb, apid) != 0)
+ handled++;
+ }
+ }
+
+ /* ACC_STATUS is empty but IRQ fired check IRQ_STATUS */
+ if (!acc_valid) {
+ for (i = first; i <= last; i++) {
+ /* skip if APPS is not irq owner */
+ if (pmic_arb->apid_data[i].irq_ee != pmic_arb->ee)
+ continue;
+
+ irq_status = readl_relaxed(
+ ver_ops->irq_status(pmic_arb, i));
+ if (irq_status) {
+ enable = readl_relaxed(
+ ver_ops->acc_enable(pmic_arb, i));
+ if (enable & SPMI_PIC_ACC_ENABLE_BIT) {
+ dev_dbg(&pmic_arb->spmic->dev,
+ "Dispatching IRQ for apid=%d status=%x\n",
+ i, irq_status);
+ if (periph_interrupt(pmic_arb, i) != 0)
+ handled++;
+ }
+ }
}
}
+ if (handled == 0)
+ handle_bad_irq(desc);
+
chained_irq_exit(chip, desc);
}
@@ -770,6 +804,7 @@ static int qpnpint_irq_domain_activate(struct irq_domain *domain,
u16 apid = hwirq_to_apid(d->hwirq);
u16 sid = hwirq_to_sid(d->hwirq);
u16 irq = hwirq_to_irq(d->hwirq);
+ u8 buf;
if (pmic_arb->apid_data[apid].irq_ee != pmic_arb->ee) {
dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u: ee=%u but owner=%u\n",
@@ -778,6 +813,10 @@ static int qpnpint_irq_domain_activate(struct irq_domain *domain,
return -ENODEV;
}
+ buf = BIT(irq);
+ qpnpint_spmi_write(d, QPNPINT_REG_EN_CLR, &buf, 1);
+ qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &buf, 1);
+
return 0;
}
@@ -992,7 +1031,8 @@ static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pmic_arb)
* version 5, there is more than one APID mapped to each PPID.
* The owner field for each of these mappings specifies the EE which is
* allowed to write to the APID. The owner of the last (highest) APID
- * for a given PPID will receive interrupts from the PPID.
+ * which has the IRQ owner bit set for a given PPID will receive
+ * interrupts from the PPID.
*/
for (i = 0; ; i++, apidd++) {
offset = pmic_arb->ver_ops->apid_map_offset(i);
@@ -1015,16 +1055,16 @@ static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pmic_arb)
apid = pmic_arb->ppid_to_apid[ppid] & ~PMIC_ARB_APID_VALID;
prev_apidd = &pmic_arb->apid_data[apid];
- if (valid && is_irq_ee &&
- prev_apidd->write_ee == pmic_arb->ee) {
+ if (!valid || apidd->write_ee == pmic_arb->ee) {
+ /* First PPID mapping or one for this EE */
+ pmic_arb->ppid_to_apid[ppid] = i | PMIC_ARB_APID_VALID;
+ } else if (valid && is_irq_ee &&
+ prev_apidd->write_ee == pmic_arb->ee) {
/*
* Duplicate PPID mapping after the one for this EE;
* override the irq owner
*/
prev_apidd->irq_ee = apidd->irq_ee;
- } else if (!valid || is_irq_ee) {
- /* First PPID mapping or duplicate for another EE */
- pmic_arb->ppid_to_apid[ppid] = i | PMIC_ARB_APID_VALID;
}
apidd->ppid = ppid;
@@ -1093,6 +1133,11 @@ static int pmic_arb_offset_v5(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
offset = 0x10000 * pmic_arb->ee + 0x80 * apid;
break;
case PMIC_ARB_CHANNEL_RW:
+ if (pmic_arb->apid_data[apid].write_ee != pmic_arb->ee) {
+ dev_err(&pmic_arb->spmic->dev, "disallowed SPMI write to sid=%u, addr=0x%04X\n",
+ sid, addr);
+ return -EPERM;
+ }
offset = 0x10000 * apid;
break;
}
diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
index a456ce5141e1..55381592bb5a 100644
--- a/drivers/spmi/spmi.c
+++ b/drivers/spmi/spmi.c
@@ -35,7 +35,7 @@ static void spmi_ctrl_release(struct device *dev)
{
struct spmi_controller *ctrl = to_spmi_controller(dev);
- ida_simple_remove(&ctrl_ida, ctrl->nr);
+ ida_free(&ctrl_ida, ctrl->nr);
kfree(ctrl);
}
@@ -457,7 +457,7 @@ struct spmi_controller *spmi_controller_alloc(struct device *parent,
ctrl->dev.of_node = parent->of_node;
spmi_controller_set_drvdata(ctrl, &ctrl[1]);
- id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL);
+ id = ida_alloc(&ctrl_ida, GFP_KERNEL);
if (id < 0) {
dev_err(parent,
"unable to allocate SPMI controller identifier.\n");
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index a8e970db179d..afd05bf3345e 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -8,7 +8,6 @@ menu "IIO staging drivers"
source "drivers/staging/iio/accel/Kconfig"
source "drivers/staging/iio/adc/Kconfig"
source "drivers/staging/iio/addac/Kconfig"
-source "drivers/staging/iio/cdc/Kconfig"
source "drivers/staging/iio/frequency/Kconfig"
source "drivers/staging/iio/impedance-analyzer/Kconfig"
source "drivers/staging/iio/meter/Kconfig"
diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile
index b15904b99581..5ed56fe57e14 100644
--- a/drivers/staging/iio/Makefile
+++ b/drivers/staging/iio/Makefile
@@ -6,7 +6,6 @@
obj-y += accel/
obj-y += adc/
obj-y += addac/
-obj-y += cdc/
obj-y += frequency/
obj-y += impedance-analyzer/
obj-y += meter/
diff --git a/drivers/staging/iio/cdc/Kconfig b/drivers/staging/iio/cdc/Kconfig
deleted file mode 100644
index a7386bbbcb79..000000000000
--- a/drivers/staging/iio/cdc/Kconfig
+++ /dev/null
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# CDC drivers
-#
-menu "Capacitance to digital converters"
-
-config AD7746
- tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver"
- depends on I2C
- help
- Say yes here to build support for Analog Devices capacitive sensors.
- (AD7745, AD7746, AD7747) Provides direct access via sysfs.
-
- To compile this driver as a module, choose M here: the
- module will be called ad7746.
-
-endmenu
diff --git a/drivers/staging/iio/cdc/Makefile b/drivers/staging/iio/cdc/Makefile
deleted file mode 100644
index afb7499a7090..000000000000
--- a/drivers/staging/iio/cdc/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for industrial I/O CDC drivers
-#
-
-obj-$(CONFIG_AD7746) += ad7746.o
diff --git a/drivers/staging/iio/frequency/ad9832.c b/drivers/staging/iio/frequency/ad9832.c
index f43464db618a..6f9eebd6c7ee 100644
--- a/drivers/staging/iio/frequency/ad9832.c
+++ b/drivers/staging/iio/frequency/ad9832.c
@@ -112,10 +112,10 @@ struct ad9832_state {
* transfer buffers to live in their own cache lines.
*/
union {
- __be16 freq_data[4]____cacheline_aligned;
+ __be16 freq_data[4];
__be16 phase_data[2];
__be16 data;
- };
+ } __aligned(IIO_DMA_MINALIGN);
};
static unsigned long ad9832_calc_freqreg(unsigned long mclk, unsigned long fout)
diff --git a/drivers/staging/iio/frequency/ad9834.c b/drivers/staging/iio/frequency/ad9834.c
index 94b131ef8a22..2b4267a87e65 100644
--- a/drivers/staging/iio/frequency/ad9834.c
+++ b/drivers/staging/iio/frequency/ad9834.c
@@ -83,7 +83,7 @@ struct ad9834_state {
* DMA (thus cache coherency maintenance) requires the
* transfer buffers to live in their own cache lines.
*/
- __be16 data ____cacheline_aligned;
+ __be16 data __aligned(IIO_DMA_MINALIGN);
__be16 freq_data[2];
};
diff --git a/drivers/staging/iio/meter/ade7854.h b/drivers/staging/iio/meter/ade7854.h
index a51e6e3183d3..7a49f8f1016f 100644
--- a/drivers/staging/iio/meter/ade7854.h
+++ b/drivers/staging/iio/meter/ade7854.h
@@ -162,7 +162,7 @@ struct ade7854_state {
int bits);
int irq;
struct mutex buf_lock;
- u8 tx[ADE7854_MAX_TX] ____cacheline_aligned;
+ u8 tx[ADE7854_MAX_TX] __aligned(IIO_DMA_MINALIGN);
u8 rx[ADE7854_MAX_RX];
};
diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
index c0b2716d0511..e4cf42438487 100644
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -94,8 +94,8 @@ struct ad2s1210_state {
bool hysteresis;
u8 resolution;
enum ad2s1210_mode mode;
- u8 rx[2] ____cacheline_aligned;
- u8 tx[2] ____cacheline_aligned;
+ u8 rx[2] __aligned(IIO_DMA_MINALIGN);
+ u8 tx[2];
};
static const int ad2s1210_mode_vals[4][2] = {
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
index bfd889422dd3..2c7f3f9a26eb 100644
--- a/drivers/thermal/qcom/Kconfig
+++ b/drivers/thermal/qcom/Kconfig
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config QCOM_TSENS
tristate "Qualcomm TSENS Temperature Alarm"
- depends on QCOM_QFPROM
+ depends on NVMEM_QCOM_QFPROM
depends on ARCH_QCOM || COMPILE_TEST
help
This enables the thermal sysfs driver for the TSENS device. It shows
diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
index af68adf720cc..1b2c43eab27d 100644
--- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
@@ -829,7 +829,8 @@ static int adc_tm5_get_dt_channel_data(struct adc_tm5_chip *adc_tm,
}
channel->adc_channel = args.args[0];
- channel->iio = devm_of_iio_channel_get_by_name(adc_tm->dev, node, NULL);
+ channel->iio = devm_fwnode_iio_channel_get_by_name(adc_tm->dev,
+ of_fwnode_handle(node), NULL);
if (IS_ERR(channel->iio)) {
ret = PTR_ERR(channel->iio);
if (ret != -EPROBE_DEFER)
diff --git a/drivers/uio/uio_dfl.c b/drivers/uio/uio_dfl.c
index 8f39cc8bb034..69e93f3e7faf 100644
--- a/drivers/uio/uio_dfl.c
+++ b/drivers/uio/uio_dfl.c
@@ -46,10 +46,12 @@ static int uio_dfl_probe(struct dfl_device *ddev)
#define FME_FEATURE_ID_ETH_GROUP 0x10
#define FME_FEATURE_ID_HSSI_SUBSYS 0x15
+#define PORT_FEATURE_ID_IOPLL_USRCLK 0x14
static const struct dfl_device_id uio_dfl_ids[] = {
{ FME_ID, FME_FEATURE_ID_ETH_GROUP },
{ FME_ID, FME_FEATURE_ID_HSSI_SUBSYS },
+ { PORT_ID, PORT_FEATURE_ID_IOPLL_USRCLK },
{ }
};
MODULE_DEVICE_TABLE(dfl, uio_dfl_ids);
diff --git a/drivers/virt/vboxguest/vboxguest_core.c b/drivers/virt/vboxguest/vboxguest_core.c
index 0b43efddea22..dfd69bd77f53 100644
--- a/drivers/virt/vboxguest/vboxguest_core.c
+++ b/drivers/virt/vboxguest/vboxguest_core.c
@@ -198,7 +198,7 @@ static int vbg_report_guest_info(struct vbg_dev *gdev)
req2->additions_revision = VBG_SVN_REV;
req2->additions_features =
VMMDEV_GUEST_INFO2_ADDITIONS_FEATURES_REQUESTOR_INFO;
- strlcpy(req2->name, VBG_VERSION_STRING,
+ strscpy(req2->name, VBG_VERSION_STRING,
sizeof(req2->name));
/*
diff --git a/drivers/virt/vboxguest/vboxguest_linux.c b/drivers/virt/vboxguest/vboxguest_linux.c
index 4ccfd30c2a30..c47e62dc55da 100644
--- a/drivers/virt/vboxguest/vboxguest_linux.c
+++ b/drivers/virt/vboxguest/vboxguest_linux.c
@@ -270,6 +270,13 @@ static ssize_t host_features_show(struct device *dev,
static DEVICE_ATTR_RO(host_version);
static DEVICE_ATTR_RO(host_features);
+static struct attribute *vbg_pci_attrs[] = {
+ &dev_attr_host_version.attr,
+ &dev_attr_host_features.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(vbg_pci);
+
/**
* Does the PCI detection and init of the device.
*
@@ -390,12 +397,6 @@ static int vbg_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
}
pci_set_drvdata(pci, gdev);
- device_create_file(dev, &dev_attr_host_version);
- device_create_file(dev, &dev_attr_host_features);
-
- vbg_info("vboxguest: misc device minor %d, IRQ %d, I/O port %x, MMIO at %pap (size %pap)\n",
- gdev->misc_device.minor, pci->irq, gdev->io_port,
- &mmio, &mmio_len);
return 0;
@@ -422,8 +423,6 @@ static void vbg_pci_remove(struct pci_dev *pci)
mutex_unlock(&vbg_gdev_mutex);
free_irq(pci->irq, gdev);
- device_remove_file(gdev->dev, &dev_attr_host_features);
- device_remove_file(gdev->dev, &dev_attr_host_version);
misc_deregister(&gdev->misc_device_user);
misc_deregister(&gdev->misc_device);
vbg_core_exit(gdev);
@@ -488,6 +487,7 @@ MODULE_DEVICE_TABLE(pci, vbg_pci_ids);
static struct pci_driver vbg_pci_driver = {
.name = DEVICE_NAME,
+ .dev_groups = vbg_pci_groups,
.id_table = vbg_pci_ids,
.probe = vbg_pci_probe,
.remove = vbg_pci_remove,
diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index fa490aa4407c..db110cc442b1 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -611,7 +611,8 @@ static void w1_cn_callback(struct cn_msg *cn, struct netlink_skb_parms *nsp)
}
atomic_set(&block->refcnt, 1);
block->portid = nsp->portid;
- memcpy(&block->request_cn, cn, sizeof(*cn) + cn->len);
+ block->request_cn = *cn;
+ memcpy(block->request_cn.data, cn->data, cn->len);
node = (struct w1_cb_node *)(block->request_cn.data + cn->len);
/* Sneeky, when not bundling, reply_size is the allocated space
diff --git a/include/dt-bindings/iio/adc/at91-sama5d2_adc.h b/include/dt-bindings/iio/adc/at91-sama5d2_adc.h
index 70f99dbdbb42..866d36530583 100644
--- a/include/dt-bindings/iio/adc/at91-sama5d2_adc.h
+++ b/include/dt-bindings/iio/adc/at91-sama5d2_adc.h
@@ -13,4 +13,7 @@
/* pressure channel index */
#define AT91_SAMA5D2_ADC_P_CHANNEL 26
+/* SAMA7G5 Temperature sensor channel index. */
+#define AT91_SAMA7G5_ADC_TEMP_CHANNEL 31
+
#endif
diff --git a/include/linux/coresight.h b/include/linux/coresight.h
index 9f445f09fcfe..1554021231f9 100644
--- a/include/linux/coresight.h
+++ b/include/linux/coresight.h
@@ -372,6 +372,29 @@ static inline u32 csdev_access_relaxed_read32(struct csdev_access *csa,
return csa->read(offset, true, false);
}
+static inline u64 csdev_access_relaxed_read_pair(struct csdev_access *csa,
+ u32 lo_offset, u32 hi_offset)
+{
+ if (likely(csa->io_mem)) {
+ return readl_relaxed(csa->base + lo_offset) |
+ ((u64)readl_relaxed(csa->base + hi_offset) << 32);
+ }
+
+ return csa->read(lo_offset, true, false) | (csa->read(hi_offset, true, false) << 32);
+}
+
+static inline void csdev_access_relaxed_write_pair(struct csdev_access *csa, u64 val,
+ u32 lo_offset, u32 hi_offset)
+{
+ if (likely(csa->io_mem)) {
+ writel_relaxed((u32)val, csa->base + lo_offset);
+ writel_relaxed((u32)(val >> 32), csa->base + hi_offset);
+ } else {
+ csa->write((u32)val, lo_offset, true, false);
+ csa->write((u32)(val >> 32), hi_offset, true, false);
+ }
+}
+
static inline u32 csdev_access_read32(struct csdev_access *csa, u32 offset)
{
if (likely(csa->io_mem))
diff --git a/include/linux/counter.h b/include/linux/counter.h
index 1fe17f5adb09..c41fa602ed28 100644
--- a/include/linux/counter.h
+++ b/include/linux/counter.h
@@ -31,6 +31,8 @@ enum counter_comp_type {
COUNTER_COMP_ENUM,
COUNTER_COMP_COUNT_DIRECTION,
COUNTER_COMP_COUNT_MODE,
+ COUNTER_COMP_SIGNAL_POLARITY,
+ COUNTER_COMP_ARRAY,
};
/**
@@ -38,66 +40,114 @@ enum counter_comp_type {
* @type: Counter component data type
* @name: device-specific component name
* @priv: component-relevant data
- * @action_read: Synapse action mode read callback. The read value of the
+ * @action_read: Synapse action mode read callback. The read value of the
* respective Synapse action mode should be passed back via
* the action parameter.
- * @device_u8_read: Device u8 component read callback. The read value of the
+ * @device_u8_read: Device u8 component read callback. The read value of the
* respective Device u8 component should be passed back via
* the val parameter.
- * @count_u8_read: Count u8 component read callback. The read value of the
+ * @count_u8_read: Count u8 component read callback. The read value of the
* respective Count u8 component should be passed back via
* the val parameter.
- * @signal_u8_read: Signal u8 component read callback. The read value of the
+ * @signal_u8_read: Signal u8 component read callback. The read value of the
* respective Signal u8 component should be passed back via
* the val parameter.
- * @device_u32_read: Device u32 component read callback. The read value of
+ * @device_u32_read: Device u32 component read callback. The read value of
* the respective Device u32 component should be passed
* back via the val parameter.
- * @count_u32_read: Count u32 component read callback. The read value of the
+ * @count_u32_read: Count u32 component read callback. The read value of the
* respective Count u32 component should be passed back via
* the val parameter.
- * @signal_u32_read: Signal u32 component read callback. The read value of
+ * @signal_u32_read: Signal u32 component read callback. The read value of
* the respective Signal u32 component should be passed
* back via the val parameter.
- * @device_u64_read: Device u64 component read callback. The read value of
+ * @device_u64_read: Device u64 component read callback. The read value of
* the respective Device u64 component should be passed
* back via the val parameter.
- * @count_u64_read: Count u64 component read callback. The read value of the
+ * @count_u64_read: Count u64 component read callback. The read value of the
* respective Count u64 component should be passed back via
* the val parameter.
- * @signal_u64_read: Signal u64 component read callback. The read value of
+ * @signal_u64_read: Signal u64 component read callback. The read value of
* the respective Signal u64 component should be passed
* back via the val parameter.
- * @action_write: Synapse action mode write callback. The write value of
+ * @signal_array_u32_read: Signal u32 array component read callback. The
+ * index of the respective Count u32 array
+ * component element is passed via the idx
+ * parameter. The read value of the respective
+ * Count u32 array component element should be
+ * passed back via the val parameter.
+ * @device_array_u64_read: Device u64 array component read callback. The
+ * index of the respective Device u64 array
+ * component element is passed via the idx
+ * parameter. The read value of the respective
+ * Device u64 array component element should be
+ * passed back via the val parameter.
+ * @count_array_u64_read: Count u64 array component read callback. The
+ * index of the respective Count u64 array
+ * component element is passed via the idx
+ * parameter. The read value of the respective
+ * Count u64 array component element should be
+ * passed back via the val parameter.
+ * @signal_array_u64_read: Signal u64 array component read callback. The
+ * index of the respective Count u64 array
+ * component element is passed via the idx
+ * parameter. The read value of the respective
+ * Count u64 array component element should be
+ * passed back via the val parameter.
+ * @action_write: Synapse action mode write callback. The write value of
* the respective Synapse action mode is passed via the
* action parameter.
- * @device_u8_write: Device u8 component write callback. The write value of
+ * @device_u8_write: Device u8 component write callback. The write value of
* the respective Device u8 component is passed via the val
* parameter.
- * @count_u8_write: Count u8 component write callback. The write value of
+ * @count_u8_write: Count u8 component write callback. The write value of
* the respective Count u8 component is passed via the val
* parameter.
- * @signal_u8_write: Signal u8 component write callback. The write value of
+ * @signal_u8_write: Signal u8 component write callback. The write value of
* the respective Signal u8 component is passed via the val
* parameter.
- * @device_u32_write: Device u32 component write callback. The write value of
+ * @device_u32_write: Device u32 component write callback. The write value of
* the respective Device u32 component is passed via the
* val parameter.
- * @count_u32_write: Count u32 component write callback. The write value of
+ * @count_u32_write: Count u32 component write callback. The write value of
* the respective Count u32 component is passed via the val
* parameter.
- * @signal_u32_write: Signal u32 component write callback. The write value of
+ * @signal_u32_write: Signal u32 component write callback. The write value of
* the respective Signal u32 component is passed via the
* val parameter.
- * @device_u64_write: Device u64 component write callback. The write value of
+ * @device_u64_write: Device u64 component write callback. The write value of
* the respective Device u64 component is passed via the
* val parameter.
- * @count_u64_write: Count u64 component write callback. The write value of
+ * @count_u64_write: Count u64 component write callback. The write value of
* the respective Count u64 component is passed via the val
* parameter.
- * @signal_u64_write: Signal u64 component write callback. The write value of
+ * @signal_u64_write: Signal u64 component write callback. The write value of
* the respective Signal u64 component is passed via the
* val parameter.
+ * @signal_array_u32_write: Signal u32 array component write callback. The
+ * index of the respective Signal u32 array
+ * component element is passed via the idx
+ * parameter. The write value of the respective
+ * Signal u32 array component element is passed via
+ * the val parameter.
+ * @device_array_u64_write: Device u64 array component write callback. The
+ * index of the respective Device u64 array
+ * component element is passed via the idx
+ * parameter. The write value of the respective
+ * Device u64 array component element is passed via
+ * the val parameter.
+ * @count_array_u64_write: Count u64 array component write callback. The
+ * index of the respective Count u64 array
+ * component element is passed via the idx
+ * parameter. The write value of the respective
+ * Count u64 array component element is passed via
+ * the val parameter.
+ * @signal_array_u64_write: Signal u64 array component write callback. The
+ * index of the respective Signal u64 array
+ * component element is passed via the idx
+ * parameter. The write value of the respective
+ * Signal u64 array component element is passed via
+ * the val parameter.
*/
struct counter_comp {
enum counter_comp_type type;
@@ -125,6 +175,17 @@ struct counter_comp {
struct counter_count *count, u64 *val);
int (*signal_u64_read)(struct counter_device *counter,
struct counter_signal *signal, u64 *val);
+ int (*signal_array_u32_read)(struct counter_device *counter,
+ struct counter_signal *signal,
+ size_t idx, u32 *val);
+ int (*device_array_u64_read)(struct counter_device *counter,
+ size_t idx, u64 *val);
+ int (*count_array_u64_read)(struct counter_device *counter,
+ struct counter_count *count,
+ size_t idx, u64 *val);
+ int (*signal_array_u64_read)(struct counter_device *counter,
+ struct counter_signal *signal,
+ size_t idx, u64 *val);
};
union {
int (*action_write)(struct counter_device *counter,
@@ -148,6 +209,17 @@ struct counter_comp {
struct counter_count *count, u64 val);
int (*signal_u64_write)(struct counter_device *counter,
struct counter_signal *signal, u64 val);
+ int (*signal_array_u32_write)(struct counter_device *counter,
+ struct counter_signal *signal,
+ size_t idx, u32 val);
+ int (*device_array_u64_write)(struct counter_device *counter,
+ size_t idx, u64 val);
+ int (*count_array_u64_write)(struct counter_device *counter,
+ struct counter_count *count,
+ size_t idx, u64 val);
+ int (*signal_array_u64_write)(struct counter_device *counter,
+ struct counter_signal *signal,
+ size_t idx, u64 val);
};
};
@@ -452,6 +524,60 @@ struct counter_available {
.priv = &(_available), \
}
+struct counter_array {
+ enum counter_comp_type type;
+ const struct counter_available *avail;
+ union {
+ size_t length;
+ size_t idx;
+ };
+};
+
+#define DEFINE_COUNTER_ARRAY_U64(_name, _length) \
+ struct counter_array _name = { \
+ .type = COUNTER_COMP_U64, \
+ .length = (_length), \
+ }
+
+#define DEFINE_COUNTER_ARRAY_CAPTURE(_name, _length) \
+ DEFINE_COUNTER_ARRAY_U64(_name, _length)
+
+#define DEFINE_COUNTER_ARRAY_POLARITY(_name, _enums, _length) \
+ DEFINE_COUNTER_AVAILABLE(_name##_available, _enums); \
+ struct counter_array _name = { \
+ .type = COUNTER_COMP_SIGNAL_POLARITY, \
+ .avail = &(_name##_available), \
+ .length = (_length), \
+ }
+
+#define COUNTER_COMP_DEVICE_ARRAY_U64(_name, _read, _write, _array) \
+{ \
+ .type = COUNTER_COMP_ARRAY, \
+ .name = (_name), \
+ .device_array_u64_read = (_read), \
+ .device_array_u64_write = (_write), \
+ .priv = &(_array), \
+}
+#define COUNTER_COMP_COUNT_ARRAY_U64(_name, _read, _write, _array) \
+{ \
+ .type = COUNTER_COMP_ARRAY, \
+ .name = (_name), \
+ .count_array_u64_read = (_read), \
+ .count_array_u64_write = (_write), \
+ .priv = &(_array), \
+}
+#define COUNTER_COMP_SIGNAL_ARRAY_U64(_name, _read, _write, _array) \
+{ \
+ .type = COUNTER_COMP_ARRAY, \
+ .name = (_name), \
+ .signal_array_u64_read = (_read), \
+ .signal_array_u64_write = (_write), \
+ .priv = &(_array), \
+}
+
+#define COUNTER_COMP_CAPTURE(_read, _write) \
+ COUNTER_COMP_COUNT_U64("capture", _read, _write)
+
#define COUNTER_COMP_CEILING(_read, _write) \
COUNTER_COMP_COUNT_U64("ceiling", _read, _write)
@@ -477,10 +603,31 @@ struct counter_available {
#define COUNTER_COMP_FLOOR(_read, _write) \
COUNTER_COMP_COUNT_U64("floor", _read, _write)
+#define COUNTER_COMP_POLARITY(_read, _write, _available) \
+{ \
+ .type = COUNTER_COMP_SIGNAL_POLARITY, \
+ .name = "polarity", \
+ .signal_u32_read = (_read), \
+ .signal_u32_write = (_write), \
+ .priv = &(_available), \
+}
+
#define COUNTER_COMP_PRESET(_read, _write) \
COUNTER_COMP_COUNT_U64("preset", _read, _write)
#define COUNTER_COMP_PRESET_ENABLE(_read, _write) \
COUNTER_COMP_COUNT_BOOL("preset_enable", _read, _write)
+#define COUNTER_COMP_ARRAY_CAPTURE(_read, _write, _array) \
+ COUNTER_COMP_COUNT_ARRAY_U64("capture", _read, _write, _array)
+
+#define COUNTER_COMP_ARRAY_POLARITY(_read, _write, _array) \
+{ \
+ .type = COUNTER_COMP_ARRAY, \
+ .name = "polarity", \
+ .signal_array_u32_read = (_read), \
+ .signal_array_u32_write = (_write), \
+ .priv = &(_array), \
+}
+
#endif /* _COUNTER_H_ */
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index 5fa5957586cf..6802596b017c 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -13,7 +13,7 @@
struct iio_dev;
struct iio_chan_spec;
struct device;
-struct device_node;
+struct fwnode_handle;
/**
* struct iio_channel - everything needed for a consumer to use a channel
@@ -99,26 +99,20 @@ void iio_channel_release_all(struct iio_channel *chan);
struct iio_channel *devm_iio_channel_get_all(struct device *dev);
/**
- * of_iio_channel_get_by_name() - get description of all that is needed to access channel.
- * @np: Pointer to consumer device tree node
+ * fwnode_iio_channel_get_by_name() - get description of all that is needed to access channel.
+ * @fwnode: Pointer to consumer Firmware node
* @consumer_channel: Unique name to identify the channel on the consumer
* side. This typically describes the channels use within
* the consumer. E.g. 'battery_voltage'
*/
-#ifdef CONFIG_OF
-struct iio_channel *of_iio_channel_get_by_name(struct device_node *np, const char *name);
-#else
-static inline struct iio_channel *
-of_iio_channel_get_by_name(struct device_node *np, const char *name)
-{
- return NULL;
-}
-#endif
+struct iio_channel *fwnode_iio_channel_get_by_name(struct fwnode_handle *fwnode,
+ const char *name);
/**
- * devm_of_iio_channel_get_by_name() - Resource managed version of of_iio_channel_get_by_name().
+ * devm_fwnode_iio_channel_get_by_name() - Resource managed version of
+ * fwnode_iio_channel_get_by_name().
* @dev: Pointer to consumer device.
- * @np: Pointer to consumer device tree node
+ * @fwnode: Pointer to consumer Firmware node
* @consumer_channel: Unique name to identify the channel on the consumer
* side. This typically describes the channels use within
* the consumer. E.g. 'battery_voltage'
@@ -129,9 +123,9 @@ of_iio_channel_get_by_name(struct device_node *np, const char *name)
* The allocated iio channel is automatically released when the device is
* unbound.
*/
-struct iio_channel *devm_of_iio_channel_get_by_name(struct device *dev,
- struct device_node *np,
- const char *consumer_channel);
+struct iio_channel *devm_fwnode_iio_channel_get_by_name(struct device *dev,
+ struct fwnode_handle *fwnode,
+ const char *consumer_channel);
struct iio_cb_buffer;
/**
diff --git a/include/linux/iio/iio-opaque.h b/include/linux/iio/iio-opaque.h
index 6b3586b3f952..d1f8b30a7c8b 100644
--- a/include/linux/iio/iio-opaque.h
+++ b/include/linux/iio/iio-opaque.h
@@ -11,6 +11,7 @@
* checked by device drivers but should be considered
* read-only as this is a core internal bit
* @driver_module: used to make it harder to undercut users
+ * @mlock_key: lockdep class for iio_dev lock
* @info_exist_lock: lock to prevent use during removal
* @trig_readonly: mark the current trigger immutable
* @event_interface: event chrdevs associated with interrupt lines
@@ -42,6 +43,7 @@ struct iio_dev_opaque {
int currentmode;
int id;
struct module *driver_module;
+ struct lock_class_key mlock_key;
struct mutex info_exist_lock;
bool trig_readonly;
struct iio_event_interface *event_interface;
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index 5dfbfc991c69..f0ec8a5e5a7a 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -17,7 +17,7 @@
* Currently assumes nano seconds.
*/
-struct of_phandle_args;
+struct fwnode_reference_args;
enum iio_shared_by {
IIO_SEPARATE,
@@ -429,6 +429,8 @@ struct iio_trigger; /* forward declaration */
* provide a custom of_xlate function that reads the
* *args* and returns the appropriate index in registered
* IIO channels array.
+ * @fwnode_xlate: fwnode based function pointer to obtain channel specifier index.
+ * Functionally the same as @of_xlate.
* @hwfifo_set_watermark: function pointer to set the current hardware
* fifo watermark level; see hwfifo_* entries in
* Documentation/ABI/testing/sysfs-bus-iio for details on
@@ -508,8 +510,8 @@ struct iio_info {
int (*debugfs_reg_access)(struct iio_dev *indio_dev,
unsigned reg, unsigned writeval,
unsigned *readval);
- int (*of_xlate)(struct iio_dev *indio_dev,
- const struct of_phandle_args *iiospec);
+ int (*fwnode_xlate)(struct iio_dev *indio_dev,
+ const struct fwnode_reference_args *iiospec);
int (*hwfifo_set_watermark)(struct iio_dev *indio_dev, unsigned val);
int (*hwfifo_flush_to_buffer)(struct iio_dev *indio_dev,
unsigned count);
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
index a7aa91f3a8dc..82faa98c719a 100644
--- a/include/linux/iio/types.h
+++ b/include/linux/iio/types.h
@@ -17,6 +17,8 @@ enum iio_event_info {
IIO_EV_INFO_HIGH_PASS_FILTER_3DB,
IIO_EV_INFO_LOW_PASS_FILTER_3DB,
IIO_EV_INFO_TIMEOUT,
+ IIO_EV_INFO_RESET_TIMEOUT,
+ IIO_EV_INFO_TAP2_MIN_DELAY,
};
#define IIO_VAL_INT 1
@@ -63,6 +65,7 @@ enum iio_chan_info_enum {
IIO_CHAN_INFO_OVERSAMPLING_RATIO,
IIO_CHAN_INFO_THERMOCOUPLE_TYPE,
IIO_CHAN_INFO_CALIBAMBIENT,
+ IIO_CHAN_INFO_ZEROPOINT,
};
#endif /* _IIO_TYPES_H_ */
diff --git a/include/linux/interconnect-provider.h b/include/linux/interconnect-provider.h
index 6bd01f7159c6..cd5c5a27557f 100644
--- a/include/linux/interconnect-provider.h
+++ b/include/linux/interconnect-provider.h
@@ -123,7 +123,7 @@ void icc_node_add(struct icc_node *node, struct icc_provider *provider);
void icc_node_del(struct icc_node *node);
int icc_nodes_remove(struct icc_provider *provider);
int icc_provider_add(struct icc_provider *provider);
-int icc_provider_del(struct icc_provider *provider);
+void icc_provider_del(struct icc_provider *provider);
struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec);
void icc_sync_state(struct device *dev);
@@ -172,9 +172,8 @@ static inline int icc_provider_add(struct icc_provider *provider)
return -ENOTSUPP;
}
-static inline int icc_provider_del(struct icc_provider *provider)
+static inline void icc_provider_del(struct icc_provider *provider)
{
- return -ENOTSUPP;
}
static inline struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec)
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index c12a5930f32c..7c58c44662b8 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -684,6 +684,7 @@ extern int mtd_device_unregister(struct mtd_info *master);
extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
extern int __get_mtd_device(struct mtd_info *mtd);
extern void __put_mtd_device(struct mtd_info *mtd);
+extern struct mtd_info *of_get_mtd_device_by_node(struct device_node *np);
extern struct mtd_info *get_mtd_device_nm(const char *name);
extern void put_mtd_device(struct mtd_info *mtd);
diff --git a/include/linux/string_helpers.h b/include/linux/string_helpers.h
index dc2e726fd820..8530c7328269 100644
--- a/include/linux/string_helpers.h
+++ b/include/linux/string_helpers.h
@@ -128,4 +128,9 @@ static inline const char *str_enabled_disabled(bool v)
return v ? "enabled" : "disabled";
}
+static inline const char *str_read_write(bool v)
+{
+ return v ? "read" : "write";
+}
+
#endif
diff --git a/include/linux/units.h b/include/linux/units.h
index 681fc652e3d7..2793a41e73a2 100644
--- a/include/linux/units.h
+++ b/include/linux/units.h
@@ -20,6 +20,9 @@
#define PICO 1000000000000ULL
#define FEMTO 1000000000000000ULL
+#define NANOHZ_PER_HZ 1000000000UL
+#define MICROHZ_PER_HZ 1000000UL
+#define MILLIHZ_PER_HZ 1000UL
#define HZ_PER_KHZ 1000UL
#define KHZ_PER_MHZ 1000UL
#define HZ_PER_MHZ 1000000UL
diff --git a/include/trace/events/habanalabs.h b/include/trace/events/habanalabs.h
new file mode 100644
index 000000000000..f05c5fa668a2
--- /dev/null
+++ b/include/trace/events/habanalabs.h
@@ -0,0 +1,93 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright 2016-2021 HabanaLabs, Ltd.
+ * All Rights Reserved.
+ *
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM habanalabs
+
+#if !defined(_TRACE_HABANALABS_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_HABANALABS_H
+
+#include <linux/tracepoint.h>
+
+DECLARE_EVENT_CLASS(habanalabs_mmu_template,
+ TP_PROTO(struct device *dev, u64 virt_addr, u64 phys_addr, u32 page_size, bool flush_pte),
+
+ TP_ARGS(dev, virt_addr, phys_addr, page_size, flush_pte),
+
+ TP_STRUCT__entry(
+ __string(dname, dev_name(dev))
+ __field(u64, virt_addr)
+ __field(u64, phys_addr)
+ __field(u32, page_size)
+ __field(u8, flush_pte)
+ ),
+
+ TP_fast_assign(
+ __assign_str(dname, dev_name(dev));
+ __entry->virt_addr = virt_addr;
+ __entry->phys_addr = phys_addr;
+ __entry->page_size = page_size;
+ __entry->flush_pte = flush_pte;
+ ),
+
+ TP_printk("%s: vaddr: %#llx, paddr: %#llx, psize: %#x, flush: %s",
+ __get_str(dname),
+ __entry->virt_addr,
+ __entry->phys_addr,
+ __entry->page_size,
+ __entry->flush_pte ? "true" : "false")
+);
+
+DEFINE_EVENT(habanalabs_mmu_template, habanalabs_mmu_map,
+ TP_PROTO(struct device *dev, u64 virt_addr, u64 phys_addr, u32 page_size, bool flush_pte),
+ TP_ARGS(dev, virt_addr, phys_addr, page_size, flush_pte));
+
+DEFINE_EVENT(habanalabs_mmu_template, habanalabs_mmu_unmap,
+ TP_PROTO(struct device *dev, u64 virt_addr, u64 phys_addr, u32 page_size, bool flush_pte),
+ TP_ARGS(dev, virt_addr, phys_addr, page_size, flush_pte));
+
+DECLARE_EVENT_CLASS(habanalabs_dma_alloc_template,
+ TP_PROTO(struct device *dev, u64 cpu_addr, u64 dma_addr, size_t size, const char *caller),
+
+ TP_ARGS(dev, cpu_addr, dma_addr, size, caller),
+
+ TP_STRUCT__entry(
+ __string(dname, dev_name(dev))
+ __field(u64, cpu_addr)
+ __field(u64, dma_addr)
+ __field(u32, size)
+ __field(const char *, caller)
+ ),
+
+ TP_fast_assign(
+ __assign_str(dname, dev_name(dev));
+ __entry->cpu_addr = cpu_addr;
+ __entry->dma_addr = dma_addr;
+ __entry->size = size;
+ __entry->caller = caller;
+ ),
+
+ TP_printk("%s: cpu_addr: %#llx, dma_addr: %#llx, size: %#x, caller: %s",
+ __get_str(dname),
+ __entry->cpu_addr,
+ __entry->dma_addr,
+ __entry->size,
+ __entry->caller)
+);
+
+DEFINE_EVENT(habanalabs_dma_alloc_template, habanalabs_dma_alloc,
+ TP_PROTO(struct device *dev, u64 cpu_addr, u64 dma_addr, size_t size, const char *caller),
+ TP_ARGS(dev, cpu_addr, dma_addr, size, caller));
+
+DEFINE_EVENT(habanalabs_dma_alloc_template, habanalabs_dma_free,
+ TP_PROTO(struct device *dev, u64 cpu_addr, u64 dma_addr, size_t size, const char *caller),
+ TP_ARGS(dev, cpu_addr, dma_addr, size, caller));
+
+#endif /* if !defined(_TRACE_HABANALABS_H) || defined(TRACE_HEADER_MULTI_READ) */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/uapi/linux/counter.h b/include/uapi/linux/counter.h
index 96c5ffd368ad..8ab12d731e3b 100644
--- a/include/uapi/linux/counter.h
+++ b/include/uapi/linux/counter.h
@@ -63,6 +63,8 @@ enum counter_event_type {
COUNTER_EVENT_INDEX,
/* State of counter is changed */
COUNTER_EVENT_CHANGE_OF_STATE,
+ /* Count value captured */
+ COUNTER_EVENT_CAPTURE,
};
/**
@@ -153,4 +155,10 @@ enum counter_synapse_action {
COUNTER_SYNAPSE_ACTION_BOTH_EDGES,
};
+/* Signal polarity values */
+enum counter_signal_polarity {
+ COUNTER_SIGNAL_POLARITY_POSITIVE,
+ COUNTER_SIGNAL_POLARITY_NEGATIVE,
+};
+
#endif /* _UAPI_COUNTER_H_ */
diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h
index 472cead10d8d..c79f2f046a0b 100644
--- a/include/uapi/linux/iio/types.h
+++ b/include/uapi/linux/iio/types.h
@@ -95,6 +95,12 @@ enum iio_modifier {
IIO_MOD_ETHANOL,
IIO_MOD_H2,
IIO_MOD_O2,
+ IIO_MOD_LINEAR_X,
+ IIO_MOD_LINEAR_Y,
+ IIO_MOD_LINEAR_Z,
+ IIO_MOD_PITCH,
+ IIO_MOD_YAW,
+ IIO_MOD_ROLL,
};
enum iio_event_type {
@@ -105,6 +111,7 @@ enum iio_event_type {
IIO_EV_TYPE_MAG_ADAPTIVE,
IIO_EV_TYPE_CHANGE,
IIO_EV_TYPE_MAG_REFERENCED,
+ IIO_EV_TYPE_GESTURE,
};
enum iio_event_direction {
@@ -112,7 +119,8 @@ enum iio_event_direction {
IIO_EV_DIR_RISING,
IIO_EV_DIR_FALLING,
IIO_EV_DIR_NONE,
+ IIO_EV_DIR_SINGLETAP,
+ IIO_EV_DIR_DOUBLETAP,
};
#endif /* _UAPI_IIO_TYPES_H_ */
-
diff --git a/include/uapi/misc/habanalabs.h b/include/uapi/misc/habanalabs.h
index 5d06d5c74dd1..e00ebe05097d 100644
--- a/include/uapi/misc/habanalabs.h
+++ b/include/uapi/misc/habanalabs.h
@@ -707,6 +707,25 @@ enum hl_server_type {
HL_SERVER_GAUDI2_HLS2 = 5
};
+/*
+ * Notifier event values - for the notification mechanism and the HL_INFO_GET_EVENTS command
+ *
+ * HL_NOTIFIER_EVENT_TPC_ASSERT - Indicates TPC assert event
+ * HL_NOTIFIER_EVENT_UNDEFINED_OPCODE - Indicates undefined operation code
+ * HL_NOTIFIER_EVENT_DEVICE_RESET - Indicates device requires a reset
+ * HL_NOTIFIER_EVENT_CS_TIMEOUT - Indicates CS timeout error
+ * HL_NOTIFIER_EVENT_DEVICE_UNAVAILABLE - Indicates device is unavailable
+ * HL_NOTIFIER_EVENT_USER_ENGINE_ERR - Indicates device engine in error state
+ * HL_NOTIFIER_EVENT_GENERAL_HW_ERR - Indicates device HW error
+ */
+#define HL_NOTIFIER_EVENT_TPC_ASSERT (1ULL << 0)
+#define HL_NOTIFIER_EVENT_UNDEFINED_OPCODE (1ULL << 1)
+#define HL_NOTIFIER_EVENT_DEVICE_RESET (1ULL << 2)
+#define HL_NOTIFIER_EVENT_CS_TIMEOUT (1ULL << 3)
+#define HL_NOTIFIER_EVENT_DEVICE_UNAVAILABLE (1ULL << 4)
+#define HL_NOTIFIER_EVENT_USER_ENGINE_ERR (1ULL << 5)
+#define HL_NOTIFIER_EVENT_GENERAL_HW_ERR (1ULL << 6)
+
/* Opcode for management ioctl
*
* HW_IP_INFO - Receive information about different IP blocks in the
@@ -754,6 +773,7 @@ enum hl_server_type {
* Razwi initiator.
* Razwi cause, was it a page fault or MMU access error.
* HL_INFO_DEV_MEM_ALLOC_PAGE_SIZES - Retrieve valid page sizes for device memory allocation
+ * HL_INFO_SECURED_ATTESTATION - Retrieve attestation report of the boot.
* HL_INFO_REGISTER_EVENTFD - Register eventfd for event notifications.
* HL_INFO_UNREGISTER_EVENTFD - Unregister eventfd
* HL_INFO_GET_EVENTS - Retrieve the last occurred events
@@ -783,14 +803,19 @@ enum hl_server_type {
#define HL_INFO_CS_TIMEOUT_EVENT 24
#define HL_INFO_RAZWI_EVENT 25
#define HL_INFO_DEV_MEM_ALLOC_PAGE_SIZES 26
+#define HL_INFO_SECURED_ATTESTATION 27
#define HL_INFO_REGISTER_EVENTFD 28
#define HL_INFO_UNREGISTER_EVENTFD 29
#define HL_INFO_GET_EVENTS 30
#define HL_INFO_UNDEFINED_OPCODE_EVENT 31
+#define HL_INFO_ENGINE_STATUS 32
#define HL_INFO_VERSION_MAX_LEN 128
#define HL_INFO_CARD_NAME_MAX_LEN 16
+/* Maximum buffer size for retrieving engines status */
+#define HL_ENGINES_DATA_MAX_SIZE SZ_1M
+
/**
* struct hl_info_hw_ip_info - hardware information on various IPs in the ASIC
* @sram_base_address: The first SRAM physical base address that is free to be
@@ -821,6 +846,7 @@ enum hl_server_type {
* @tpc_enabled_mask: Bit-mask that represents which TPCs are enabled. Relevant
* for Goya/Gaudi only.
* @dram_enabled: Whether the DRAM is enabled.
+ * @security_enabled: Whether security is enabled on device.
* @mme_master_slave_mode: Indicate whether the MME is working in master/slave
* configuration. Relevant for Greco and later.
* @cpucp_version: The CPUCP f/w version.
@@ -852,7 +878,7 @@ struct hl_info_hw_ip_info {
__u32 psoc_pci_pll_div_factor;
__u8 tpc_enabled_mask;
__u8 dram_enabled;
- __u8 reserved;
+ __u8 security_enabled;
__u8 mme_master_slave_mode;
__u8 cpucp_version[HL_INFO_VERSION_MAX_LEN];
__u8 card_name[HL_INFO_CARD_NAME_MAX_LEN];
@@ -876,13 +902,13 @@ struct hl_info_hw_idle {
__u32 is_idle;
/*
* Bitmask of busy engines.
- * Bits definition is according to `enum <chip>_enging_id'.
+ * Bits definition is according to `enum <chip>_engine_id'.
*/
__u32 busy_engines_mask;
/*
* Extended Bitmask of busy engines.
- * Bits definition is according to `enum <chip>_enging_id'.
+ * Bits definition is according to `enum <chip>_engine_id'.
*/
__u64 busy_engines_mask_ext[HL_BUSY_ENGINES_MASK_EXT_SIZE];
};
@@ -1078,12 +1104,12 @@ struct hl_info_razwi_event {
* struct hl_info_undefined_opcode_event - info about last undefined opcode error
* @timestamp: timestamp of the undefined opcode error
* @cb_addr_streams: CB addresses (per stream) that are currently exists in the PQ
- * entiers. In case all streams array entries are
+ * entries. In case all streams array entries are
* filled with values, it means the execution was in Lower-CP.
* @cq_addr: the address of the current handled command buffer
* @cq_size: the size of the current handled command buffer
* @cb_addr_streams_len: num of streams - actual len of cb_addr_streams array.
- * should be equal to 1 incase of undefined opcode
+ * should be equal to 1 in case of undefined opcode
* in Upper-CP (specific stream) and equal to 4 incase
* of undefined opcode in Lower-CP.
* @engine_id: engine-id that the error occurred on
@@ -1109,6 +1135,45 @@ struct hl_info_dev_memalloc_page_sizes {
__u64 page_order_bitmask;
};
+#define SEC_PCR_DATA_BUF_SZ 256
+#define SEC_PCR_QUOTE_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */
+#define SEC_SIGNATURE_BUF_SZ 255 /* (256 - 1) 1 byte used for size */
+#define SEC_PUB_DATA_BUF_SZ 510 /* (512 - 2) 2 bytes used for size */
+#define SEC_CERTIFICATE_BUF_SZ 2046 /* (2048 - 2) 2 bytes used for size */
+
+/*
+ * struct hl_info_sec_attest - attestation report of the boot
+ * @nonce: number only used once. random number provided by host. this also passed to the quote
+ * command as a qualifying data.
+ * @pcr_quote_len: length of the attestation quote data (bytes)
+ * @pub_data_len: length of the public data (bytes)
+ * @certificate_len: length of the certificate (bytes)
+ * @pcr_num_reg: number of PCR registers in the pcr_data array
+ * @pcr_reg_len: length of each PCR register in the pcr_data array (bytes)
+ * @quote_sig_len: length of the attestation report signature (bytes)
+ * @pcr_data: raw values of the PCR registers
+ * @pcr_quote: attestation report data structure
+ * @quote_sig: signature structure of the attestation report
+ * @public_data: public key for the signed attestation
+ * (outPublic + name + qualifiedName)
+ * @certificate: certificate for the attestation signing key
+ */
+struct hl_info_sec_attest {
+ __u32 nonce;
+ __u16 pcr_quote_len;
+ __u16 pub_data_len;
+ __u16 certificate_len;
+ __u8 pcr_num_reg;
+ __u8 pcr_reg_len;
+ __u8 quote_sig_len;
+ __u8 pcr_data[SEC_PCR_DATA_BUF_SZ];
+ __u8 pcr_quote[SEC_PCR_QUOTE_BUF_SZ];
+ __u8 quote_sig[SEC_SIGNATURE_BUF_SZ];
+ __u8 public_data[SEC_PUB_DATA_BUF_SZ];
+ __u8 certificate[SEC_CERTIFICATE_BUF_SZ];
+ __u8 pad0[2];
+};
+
enum gaudi_dcores {
HL_GAUDI_WS_DCORE,
HL_GAUDI_WN_DCORE,
@@ -1130,6 +1195,11 @@ enum gaudi_dcores {
* resolution. Currently not in use.
* @pll_index: Index as defined in hl_<asic type>_pll_index enumeration.
* @eventfd: event file descriptor for event notifications.
+ * @user_buffer_actual_size: Actual data size which was copied to user allocated buffer by the
+ * driver. It is possible for the user to allocate buffer larger than
+ * needed, hence updating this variable so user will know the exact amount
+ * of bytes copied by the kernel to the buffer.
+ * @sec_attest_nonce: Nonce number used for attestation report.
* @pad: Padding to 64 bit.
*/
struct hl_info_args {
@@ -1143,6 +1213,8 @@ struct hl_info_args {
__u32 period_ms;
__u32 pll_index;
__u32 eventfd;
+ __u32 user_buffer_actual_size;
+ __u32 sec_attest_nonce;
};
__u32 pad;
@@ -1337,17 +1409,47 @@ struct hl_cs_chunk {
#define HL_CS_FLAGS_RESERVE_SIGNALS_ONLY 0x1000
#define HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY 0x2000
+/*
+ * The engine cores CS is merged into the existing CS ioctls.
+ * Use it to control the engine cores mode.
+ */
+#define HL_CS_FLAGS_ENGINE_CORE_COMMAND 0x4000
+
#define HL_CS_STATUS_SUCCESS 0
#define HL_MAX_JOBS_PER_CS 512
+/* HL_ENGINE_CORE_ values
+ *
+ * HL_ENGINE_CORE_HALT: engine core halt
+ * HL_ENGINE_CORE_RUN: engine core run
+ */
+#define HL_ENGINE_CORE_HALT (1 << 0)
+#define HL_ENGINE_CORE_RUN (1 << 1)
+
struct hl_cs_in {
- /* this holds address of array of hl_cs_chunk for restore phase */
- __u64 chunks_restore;
+ union {
+ struct {
+ /* this holds address of array of hl_cs_chunk for restore phase */
+ __u64 chunks_restore;
+
+ /* holds address of array of hl_cs_chunk for execution phase */
+ __u64 chunks_execute;
+ };
+
+ /* Valid only when HL_CS_FLAGS_ENGINE_CORE_COMMAND is set */
+ struct {
+ /* this holds address of array of uint32 for engine_cores */
+ __u64 engine_cores;
- /* holds address of array of hl_cs_chunk for execution phase */
- __u64 chunks_execute;
+ /* number of engine cores in engine_cores array */
+ __u32 num_engine_cores;
+
+ /* the core command to be sent towards engine cores */
+ __u32 core_command;
+ };
+ };
union {
/*
@@ -1412,7 +1514,7 @@ struct hl_cs_out {
/* Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set */
struct {
- /* This is the resereved signal handle id */
+ /* This is the reserved signal handle id */
__u32 handle_id;
/* This is the signals count */
@@ -1875,21 +1977,6 @@ struct hl_debug_args {
};
/*
- * Notifier event values - for the notification mechanism and the HL_INFO_GET_EVENTS command
- *
- * HL_NOTIFIER_EVENT_TPC_ASSERT - Indicates TPC assert event
- * HL_NOTIFIER_EVENT_UNDEFINED_OPCODE - Indicates undefined operation code
- * HL_NOTIFIER_EVENT_DEVICE_RESET - Indicates device requires a reset
- * HL_NOTIFIER_EVENT_CS_TIMEOUT - Indicates CS timeout error
- * HL_NOTIFIER_EVENT_DEVICE_UNAVAILABLE - Indicates device is unavailable
- */
-#define HL_NOTIFIER_EVENT_TPC_ASSERT (1ULL << 0)
-#define HL_NOTIFIER_EVENT_UNDEFINED_OPCODE (1ULL << 1)
-#define HL_NOTIFIER_EVENT_DEVICE_RESET (1ULL << 2)
-#define HL_NOTIFIER_EVENT_CS_TIMEOUT (1ULL << 3)
-#define HL_NOTIFIER_EVENT_DEVICE_UNAVAILABLE (1ULL << 4)
-
-/*
* Various information operations such as:
* - H/W IP information
* - Current dram usage
diff --git a/tools/iio/iio_event_monitor.c b/tools/iio/iio_event_monitor.c
index 2f4581658859..0a5c2bb60030 100644
--- a/tools/iio/iio_event_monitor.c
+++ b/tools/iio/iio_event_monitor.c
@@ -69,12 +69,15 @@ static const char * const iio_ev_type_text[] = {
[IIO_EV_TYPE_MAG_ADAPTIVE] = "mag_adaptive",
[IIO_EV_TYPE_CHANGE] = "change",
[IIO_EV_TYPE_MAG_REFERENCED] = "mag_referenced",
+ [IIO_EV_TYPE_GESTURE] = "gesture",
};
static const char * const iio_ev_dir_text[] = {
[IIO_EV_DIR_EITHER] = "either",
[IIO_EV_DIR_RISING] = "rising",
- [IIO_EV_DIR_FALLING] = "falling"
+ [IIO_EV_DIR_FALLING] = "falling",
+ [IIO_EV_DIR_SINGLETAP] = "singletap",
+ [IIO_EV_DIR_DOUBLETAP] = "doubletap",
};
static const char * const iio_modifier_names[] = {
@@ -122,6 +125,12 @@ static const char * const iio_modifier_names[] = {
[IIO_MOD_PM4] = "pm4",
[IIO_MOD_PM10] = "pm10",
[IIO_MOD_O2] = "o2",
+ [IIO_MOD_LINEAR_X] = "linear_x",
+ [IIO_MOD_LINEAR_Y] = "linear_y",
+ [IIO_MOD_LINEAR_Z] = "linear_z",
+ [IIO_MOD_PITCH] = "pitch",
+ [IIO_MOD_YAW] = "yaw",
+ [IIO_MOD_ROLL] = "roll",
};
static bool event_is_known(struct iio_event_data *event)
@@ -227,6 +236,7 @@ static bool event_is_known(struct iio_event_data *event)
case IIO_EV_TYPE_THRESH_ADAPTIVE:
case IIO_EV_TYPE_MAG_ADAPTIVE:
case IIO_EV_TYPE_CHANGE:
+ case IIO_EV_TYPE_GESTURE:
break;
default:
return false;
@@ -236,6 +246,8 @@ static bool event_is_known(struct iio_event_data *event)
case IIO_EV_DIR_EITHER:
case IIO_EV_DIR_RISING:
case IIO_EV_DIR_FALLING:
+ case IIO_EV_DIR_SINGLETAP:
+ case IIO_EV_DIR_DOUBLETAP:
case IIO_EV_DIR_NONE:
break;
default: