Merge commit 'bluetooth/master'

14 files changed, 2561 insertions, 30 deletions

diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index d05737aaa84b..06b982affe76 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -82,6 +82,8 @@ block/
 	- info on the Block I/O (BIO) layer.
 blockdev/
 	- info on block devices & drivers
+btmrvl.txt
+	- info on Marvell Bluetooth driver usage.
 cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
 cdrom/
diff --git a/Documentation/btmrvl.txt b/Documentation/btmrvl.txt
new file mode 100644
index 000000000000..34916a46c099
--- /dev/null
+++ b/Documentation/btmrvl.txt
@@ -0,0 +1,119 @@
+=======================================================================
+		README for btmrvl driver
+=======================================================================
+
+
+All commands are used via debugfs interface.
+
+=====================
+Set/get driver configurations:
+
+Path:	/debug/btmrvl/config/
+
+gpiogap=[n]
+hscfgcmd
+	These commands are used to configure the host sleep parameters.
+	bit 8:0  -- Gap
+	bit 16:8 -- GPIO
+
+	where GPIO is the pin number of GPIO used to wake up the host.
+	It could be any valid GPIO pin# (e.g. 0-7) or 0xff (SDIO interface
+	wakeup will be used instead).
+
+	where Gap is the gap in milli seconds between wakeup signal and
+	wakeup event, or 0xff for special host sleep setting.
+
+	Usage:
+		# Use SDIO interface to wake up the host and set GAP to 0x80:
+		echo 0xff80 > /debug/btmrvl/config/gpiogap
+		echo 1 > /debug/btmrvl/config/hscfgcmd
+
+		# Use GPIO pin #3 to wake up the host and set GAP to 0xff:
+		echo 0x03ff >  /debug/btmrvl/config/gpiogap
+		echo 1 > /debug/btmrvl/config/hscfgcmd
+
+psmode=[n]
+pscmd
+	These commands are used to enable/disable auto sleep mode
+
+	where the option is:
+			1 	-- Enable auto sleep mode
+			0 	-- Disable auto sleep mode
+
+	Usage:
+		# Enable auto sleep mode
+		echo 1 > /debug/btmrvl/config/psmode
+		echo 1 > /debug/btmrvl/config/pscmd
+
+		# Disable auto sleep mode
+		echo 0 > /debug/btmrvl/config/psmode
+		echo 1 > /debug/btmrvl/config/pscmd
+
+
+hsmode=[n]
+hscmd
+	These commands are used to enable host sleep or wake up firmware
+
+	where the option is:
+			1	-- Enable host sleep
+			0	-- Wake up firmware
+
+	Usage:
+		# Enable host sleep
+		echo 1 > /debug/btmrvl/config/hsmode
+		echo 1 > /debug/btmrvl/config/hscmd
+
+		# Wake up firmware
+		echo 0 > /debug/btmrvl/config/hsmode
+		echo 1 > /debug/btmrvl/config/hscmd
+
+
+======================
+Get driver status:
+
+Path:	/debug/btmrvl/status/
+
+Usage:
+	cat /debug/btmrvl/status/<args>
+
+where the args are:
+
+curpsmode
+	This command displays current auto sleep status.
+
+psstate
+	This command display the power save state.
+
+hsstate
+	This command display the host sleep state.
+
+txdnldrdy
+	This command displays the value of Tx download ready flag.
+
+
+=====================
+
+Use hcitool to issue raw hci command, refer to hcitool manual
+
+	Usage: Hcitool cmd <ogf> <ocf> [Parameters]
+
+	Interface Control Command
+	hcitool cmd 0x3f 0x5b 0xf5 0x01 0x00    --Enable All interface
+	hcitool cmd 0x3f 0x5b 0xf5 0x01 0x01    --Enable Wlan interface
+	hcitool cmd 0x3f 0x5b 0xf5 0x01 0x02    --Enable BT interface
+	hcitool cmd 0x3f 0x5b 0xf5 0x00 0x00    --Disable All interface
+	hcitool cmd 0x3f 0x5b 0xf5 0x00 0x01    --Disable Wlan interface
+	hcitool cmd 0x3f 0x5b 0xf5 0x00 0x02    --Disable BT interface
+
+=======================================================================
+
+
+SD8688 firmware:
+
+/lib/firmware/sd8688_helper.bin
+/lib/firmware/sd8688.bin
+
+
+The images can be downloaded from:
+
+git.infradead.org/users/dwmw2/linux-firmware.git/libertas/
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 1164837bb781..652367aa6546 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -170,5 +170,30 @@ config BT_HCIVHCI
 	  Say Y here to compile support for virtual HCI devices into the
 	  kernel or say M to compile it as module (hci_vhci).
 
+config BT_MRVL
+	tristate "Marvell Bluetooth driver support"
+	help
+	  The core driver to support Marvell Bluetooth devices.
+
+	  This driver is required if you want to support
+	  Marvell Bluetooth devices, such as 8688.
+
+	  Say Y here to compile Marvell Bluetooth driver
+	  into the kernel or say M to compile it as module.
+
+config BT_MRVL_SDIO
+	tristate "Marvell BT-over-SDIO driver"
+	depends on BT_MRVL && MMC
+	select FW_LOADER
+	help
+	  The driver for Marvell Bluetooth chipsets with SDIO interface.
+
+	  This driver is required if you want to use Marvell Bluetooth
+	  devices with SDIO interface. Currently only SD8688 chipset is
+	  supported.
+
+	  Say Y here to compile support for Marvell BT-over-SDIO driver
+	  into the kernel or say M to compile it as module.
+
 endmenu
 
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 16930f93d1ca..b3f57d2d4eb0 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -15,6 +15,12 @@ obj-$(CONFIG_BT_HCIBTUART)	+= btuart_cs.o
 obj-$(CONFIG_BT_HCIBTUSB)	+= btusb.o
 obj-$(CONFIG_BT_HCIBTSDIO)	+= btsdio.o
 
+obj-$(CONFIG_BT_MRVL)		+= btmrvl.o
+obj-$(CONFIG_BT_MRVL_SDIO)	+= btmrvl_sdio.o
+
+btmrvl-y			:= btmrvl_main.o
+btmrvl-$(CONFIG_DEBUG_FS)	+= btmrvl_debugfs.o
+
 hci_uart-y				:= hci_ldisc.o
 hci_uart-$(CONFIG_BT_HCIUART_H4)	+= hci_h4.o
 hci_uart-$(CONFIG_BT_HCIUART_BCSP)	+= hci_bcsp.o
diff --git a/drivers/bluetooth/btmrvl_debugfs.c b/drivers/bluetooth/btmrvl_debugfs.c
new file mode 100644
index 000000000000..4617bd12f63b
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_debugfs.c
@@ -0,0 +1,432 @@
+/**
+ * Marvell Bluetooth driver: debugfs related functions
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ **/
+
+#include <linux/debugfs.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btmrvl_drv.h"
+
+struct btmrvl_debugfs_data {
+	struct dentry *root_dir, *config_dir, *status_dir;
+
+	/* config */
+	struct dentry *drvdbg;
+	struct dentry *psmode;
+	struct dentry *pscmd;
+	struct dentry *hsmode;
+	struct dentry *hscmd;
+	struct dentry *gpiogap;
+	struct dentry *hscfgcmd;
+
+	/* status */
+	struct dentry *curpsmode;
+	struct dentry *hsstate;
+	struct dentry *psstate;
+	struct dentry *txdnldready;
+};
+
+static int btmrvl_open_generic(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+static ssize_t btmrvl_hscfgcmd_write(struct file *file,
+			const char __user *ubuf, size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	long result, ret;
+
+	memset(buf, 0, sizeof(buf));
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	ret = strict_strtol(buf, 10, &result);
+
+	priv->btmrvl_dev.hscfgcmd = result;
+
+	if (priv->btmrvl_dev.hscfgcmd) {
+		btmrvl_prepare_command(priv);
+		wake_up_interruptible(&priv->main_thread.wait_q);
+	}
+
+	return count;
+}
+
+static ssize_t btmrvl_hscfgcmd_read(struct file *file, char __user *userbuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	int ret;
+
+	ret = snprintf(buf, sizeof(buf) - 1, "%d\n",
+						priv->btmrvl_dev.hscfgcmd);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_hscfgcmd_fops = {
+	.read	= btmrvl_hscfgcmd_read,
+	.write	= btmrvl_hscfgcmd_write,
+	.open	= btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_psmode_write(struct file *file, const char __user *ubuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	long result, ret;
+
+	memset(buf, 0, sizeof(buf));
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	ret = strict_strtol(buf, 10, &result);
+
+	priv->btmrvl_dev.psmode = result;
+
+	return count;
+}
+
+static ssize_t btmrvl_psmode_read(struct file *file, char __user *userbuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	int ret;
+
+	ret = snprintf(buf, sizeof(buf) - 1, "%d\n",
+						priv->btmrvl_dev.psmode);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_psmode_fops = {
+	.read	= btmrvl_psmode_read,
+	.write	= btmrvl_psmode_write,
+	.open	= btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_pscmd_write(struct file *file, const char __user *ubuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	long result, ret;
+
+	memset(buf, 0, sizeof(buf));
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	ret = strict_strtol(buf, 10, &result);
+
+	priv->btmrvl_dev.pscmd = result;
+
+	if (priv->btmrvl_dev.pscmd) {
+		btmrvl_prepare_command(priv);
+		wake_up_interruptible(&priv->main_thread.wait_q);
+	}
+
+	return count;
+
+}
+
+static ssize_t btmrvl_pscmd_read(struct file *file, char __user *userbuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	int ret;
+
+	ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->btmrvl_dev.pscmd);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_pscmd_fops = {
+	.read = btmrvl_pscmd_read,
+	.write = btmrvl_pscmd_write,
+	.open = btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_gpiogap_write(struct file *file, const char __user *ubuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	long result, ret;
+
+	memset(buf, 0, sizeof(buf));
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	ret = strict_strtol(buf, 16, &result);
+
+	priv->btmrvl_dev.gpio_gap = result;
+
+	return count;
+}
+
+static ssize_t btmrvl_gpiogap_read(struct file *file, char __user *userbuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	int ret;
+
+	ret = snprintf(buf, sizeof(buf) - 1, "0x%x\n",
+						priv->btmrvl_dev.gpio_gap);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_gpiogap_fops = {
+	.read	= btmrvl_gpiogap_read,
+	.write	= btmrvl_gpiogap_write,
+	.open	= btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_hscmd_write(struct file *file, const char __user *ubuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = (struct btmrvl_private *) file->private_data;
+	char buf[16];
+	long result, ret;
+
+	memset(buf, 0, sizeof(buf));
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	ret = strict_strtol(buf, 10, &result);
+
+	priv->btmrvl_dev.hscmd = result;
+	if (priv->btmrvl_dev.hscmd) {
+		btmrvl_prepare_command(priv);
+		wake_up_interruptible(&priv->main_thread.wait_q);
+	}
+
+	return count;
+}
+
+static ssize_t btmrvl_hscmd_read(struct file *file, char __user *userbuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	int ret;
+
+	ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->btmrvl_dev.hscmd);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_hscmd_fops = {
+	.read	= btmrvl_hscmd_read,
+	.write	= btmrvl_hscmd_write,
+	.open	= btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_hsmode_write(struct file *file, const char __user *ubuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	long result, ret;
+
+	memset(buf, 0, sizeof(buf));
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+		return -EFAULT;
+
+	ret = strict_strtol(buf, 10, &result);
+
+	priv->btmrvl_dev.hsmode = result;
+
+	return count;
+}
+
+static ssize_t btmrvl_hsmode_read(struct file *file, char __user * userbuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	int ret;
+
+	ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->btmrvl_dev.hsmode);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_hsmode_fops = {
+	.read	= btmrvl_hsmode_read,
+	.write	= btmrvl_hsmode_write,
+	.open	= btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_curpsmode_read(struct file *file, char __user *userbuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	int ret;
+
+	ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->adapter->psmode);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_curpsmode_fops = {
+	.read	= btmrvl_curpsmode_read,
+	.open	= btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_psstate_read(struct file *file, char __user * userbuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	int ret;
+
+	ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->adapter->ps_state);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_psstate_fops = {
+	.read	= btmrvl_psstate_read,
+	.open	= btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_hsstate_read(struct file *file, char __user *userbuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	int ret;
+
+	ret = snprintf(buf, sizeof(buf) - 1, "%d\n", priv->adapter->hs_state);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_hsstate_fops = {
+	.read	= btmrvl_hsstate_read,
+	.open	= btmrvl_open_generic,
+};
+
+static ssize_t btmrvl_txdnldready_read(struct file *file, char __user *userbuf,
+						size_t count, loff_t *ppos)
+{
+	struct btmrvl_private *priv = file->private_data;
+	char buf[16];
+	int ret;
+
+	ret = snprintf(buf, sizeof(buf) - 1, "%d\n",
+					priv->btmrvl_dev.tx_dnld_rdy);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, ret);
+}
+
+static const struct file_operations btmrvl_txdnldready_fops = {
+	.read	= btmrvl_txdnldready_read,
+	.open	= btmrvl_open_generic,
+};
+
+void btmrvl_debugfs_init(struct hci_dev *hdev)
+{
+	struct btmrvl_private *priv = hdev->driver_data;
+	struct btmrvl_debugfs_data *dbg;
+
+	dbg = kzalloc(sizeof(*dbg), GFP_KERNEL);
+	priv->debugfs_data = dbg;
+
+	if (!dbg) {
+		BT_ERR("Can not allocate memory for btmrvl_debugfs_data.");
+		return;
+	}
+
+	dbg->root_dir = debugfs_create_dir("btmrvl", NULL);
+
+	dbg->config_dir = debugfs_create_dir("config", dbg->root_dir);
+
+	dbg->psmode = debugfs_create_file("psmode", 0644, dbg->config_dir,
+				hdev->driver_data, &btmrvl_psmode_fops);
+	dbg->pscmd = debugfs_create_file("pscmd", 0644, dbg->config_dir,
+				hdev->driver_data, &btmrvl_pscmd_fops);
+	dbg->gpiogap = debugfs_create_file("gpiogap", 0644, dbg->config_dir,
+				hdev->driver_data, &btmrvl_gpiogap_fops);
+	dbg->hsmode =  debugfs_create_file("hsmode", 0644, dbg->config_dir,
+				hdev->driver_data, &btmrvl_hsmode_fops);
+	dbg->hscmd = debugfs_create_file("hscmd", 0644, dbg->config_dir,
+				hdev->driver_data, &btmrvl_hscmd_fops);
+	dbg->hscfgcmd = debugfs_create_file("hscfgcmd", 0644, dbg->config_dir,
+				hdev->driver_data, &btmrvl_hscfgcmd_fops);
+
+	dbg->status_dir = debugfs_create_dir("status", dbg->root_dir);
+	dbg->curpsmode = debugfs_create_file("curpsmode", 0444,
+						dbg->status_dir,
+						hdev->driver_data,
+						&btmrvl_curpsmode_fops);
+	dbg->psstate = debugfs_create_file("psstate", 0444, dbg->status_dir,
+				hdev->driver_data, &btmrvl_psstate_fops);
+	dbg->hsstate = debugfs_create_file("hsstate", 0444, dbg->status_dir,
+				hdev->driver_data, &btmrvl_hsstate_fops);
+	dbg->txdnldready = debugfs_create_file("txdnldready", 0444,
+						dbg->status_dir,
+						hdev->driver_data,
+						&btmrvl_txdnldready_fops);
+}
+
+void btmrvl_debugfs_remove(struct hci_dev *hdev)
+{
+	struct btmrvl_private *priv = hdev->driver_data;
+	struct btmrvl_debugfs_data *dbg = priv->debugfs_data;
+
+	if (!dbg)
+		return;
+
+	debugfs_remove(dbg->psmode);
+	debugfs_remove(dbg->pscmd);
+	debugfs_remove(dbg->gpiogap);
+	debugfs_remove(dbg->hsmode);
+	debugfs_remove(dbg->hscmd);
+	debugfs_remove(dbg->hscfgcmd);
+	debugfs_remove(dbg->config_dir);
+
+	debugfs_remove(dbg->curpsmode);
+	debugfs_remove(dbg->psstate);
+	debugfs_remove(dbg->hsstate);
+	debugfs_remove(dbg->txdnldready);
+	debugfs_remove(dbg->status_dir);
+
+	debugfs_remove(dbg->root_dir);
+
+	kfree(dbg);
+}
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
new file mode 100644
index 000000000000..411c7a77082d
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -0,0 +1,139 @@
+/*
+ * Marvell Bluetooth driver: global definitions & declarations
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ *
+ */
+
+#include <linux/kthread.h>
+#include <linux/bitops.h>
+#include <net/bluetooth/bluetooth.h>
+
+#define BTM_HEADER_LEN			4
+#define BTM_UPLD_SIZE			2312
+
+/* Time to wait until Host Sleep state change in millisecond */
+#define WAIT_UNTIL_HS_STATE_CHANGED	5000
+/* Time to wait for command response in millisecond */
+#define WAIT_UNTIL_CMD_RESP		5000
+
+struct btmrvl_thread {
+	struct task_struct *task;
+	wait_queue_head_t wait_q;
+	void *priv;
+};
+
+struct btmrvl_device {
+	void *card;
+	struct hci_dev *hcidev;
+
+	u8 tx_dnld_rdy;
+
+	u8 psmode;
+	u8 pscmd;
+	u8 hsmode;
+	u8 hscmd;
+
+	/* Low byte is gap, high byte is GPIO */
+	u16 gpio_gap;
+
+	u8 hscfgcmd;
+	u8 sendcmdflag;
+};
+
+struct btmrvl_adapter {
+	u32 int_count;
+	struct sk_buff_head tx_queue;
+	u8 psmode;
+	u8 ps_state;
+	u8 hs_state;
+	u8 wakeup_tries;
+	wait_queue_head_t cmd_wait_q;
+	u8 cmd_complete;
+};
+
+struct btmrvl_private {
+	struct btmrvl_device btmrvl_dev;
+	struct btmrvl_adapter *adapter;
+	struct btmrvl_thread main_thread;
+	int (*hw_host_to_card) (struct btmrvl_private *priv,
+				u8 *payload, u16 nb);
+	int (*hw_wakeup_firmware) (struct btmrvl_private *priv);
+	spinlock_t driver_lock;		/* spinlock used by driver */
+#ifdef CONFIG_DEBUG_FS
+	void *debugfs_data;
+#endif
+};
+
+#define MRVL_VENDOR_PKT			0xFE
+
+/* Bluetooth commands  */
+#define BT_CMD_AUTO_SLEEP_MODE		0x23
+#define BT_CMD_HOST_SLEEP_CONFIG	0x59
+#define BT_CMD_HOST_SLEEP_ENABLE	0x5A
+#define BT_CMD_MODULE_CFG_REQ		0x5B
+
+/* Sub-commands: Module Bringup/Shutdown Request */
+#define MODULE_BRINGUP_REQ		0xF1
+#define MODULE_SHUTDOWN_REQ		0xF2
+
+#define BT_EVENT_POWER_STATE		0x20
+
+/* Bluetooth Power States */
+#define BT_PS_ENABLE			0x02
+#define BT_PS_DISABLE			0x03
+#define BT_PS_SLEEP			0x01
+
+#define OGF				0x3F
+
+/* Host Sleep states */
+#define HS_ACTIVATED			0x01
+#define HS_DEACTIVATED			0x00
+
+/* Power Save modes */
+#define PS_SLEEP			0x01
+#define PS_AWAKE			0x00
+
+struct btmrvl_cmd {
+	__le16 ocf_ogf;
+	u8 length;
+	u8 data[4];
+} __attribute__ ((packed));
+
+struct btmrvl_event {
+	u8 ec;		/* event counter */
+	u8 length;
+	u8 data[4];
+} __attribute__ ((packed));
+
+/* Prototype of global function */
+
+struct btmrvl_private *btmrvl_add_card(void *card);
+int btmrvl_remove_card(struct btmrvl_private *priv);
+
+void btmrvl_interrupt(struct btmrvl_private *priv);
+
+void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
+int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb);
+
+int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd);
+int btmrvl_prepare_command(struct btmrvl_private *priv);
+
+#ifdef CONFIG_DEBUG_FS
+void btmrvl_debugfs_init(struct hci_dev *hdev);
+void btmrvl_debugfs_remove(struct hci_dev *hdev);
+#endif
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
new file mode 100644
index 000000000000..e605563b4eaa
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -0,0 +1,624 @@
+/**
+ * Marvell Bluetooth driver
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ **/
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btmrvl_drv.h"
+
+#define VERSION "1.0"
+
+/*
+ * This function is called by interface specific interrupt handler.
+ * It updates Power Save & Host Sleep states, and wakes up the main
+ * thread.
+ */
+void btmrvl_interrupt(struct btmrvl_private *priv)
+{
+	priv->adapter->ps_state = PS_AWAKE;
+
+	priv->adapter->wakeup_tries = 0;
+
+	priv->adapter->int_count++;
+
+	wake_up_interruptible(&priv->main_thread.wait_q);
+}
+EXPORT_SYMBOL_GPL(btmrvl_interrupt);
+
+void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
+{
+	struct hci_event_hdr *hdr = (void *) skb->data;
+	struct hci_ev_cmd_complete *ec;
+	u16 opcode, ocf;
+
+	if (hdr->evt == HCI_EV_CMD_COMPLETE) {
+		ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE);
+		opcode = __le16_to_cpu(ec->opcode);
+		ocf = hci_opcode_ocf(opcode);
+		if (ocf == BT_CMD_MODULE_CFG_REQ &&
+					priv->btmrvl_dev.sendcmdflag) {
+			priv->btmrvl_dev.sendcmdflag = false;
+			priv->adapter->cmd_complete = true;
+			wake_up_interruptible(&priv->adapter->cmd_wait_q);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(btmrvl_check_evtpkt);
+
+int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
+{
+	struct btmrvl_adapter *adapter = priv->adapter;
+	struct btmrvl_event *event;
+	u8 ret = 0;
+
+	event = (struct btmrvl_event *) skb->data;
+	if (event->ec != 0xff) {
+		BT_DBG("Not Marvell Event=%x", event->ec);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (event->data[0]) {
+	case BT_CMD_AUTO_SLEEP_MODE:
+		if (!event->data[2]) {
+			if (event->data[1] == BT_PS_ENABLE)
+				adapter->psmode = 1;
+			else
+				adapter->psmode = 0;
+			BT_DBG("PS Mode:%s",
+				(adapter->psmode) ? "Enable" : "Disable");
+		} else {
+			BT_DBG("PS Mode command failed");
+		}
+		break;
+
+	case BT_CMD_HOST_SLEEP_CONFIG:
+		if (!event->data[3])
+			BT_DBG("gpio=%x, gap=%x", event->data[1],
+							event->data[2]);
+		else
+			BT_DBG("HSCFG command failed");
+		break;
+
+	case BT_CMD_HOST_SLEEP_ENABLE:
+		if (!event->data[1]) {
+			adapter->hs_state = HS_ACTIVATED;
+			if (adapter->psmode)
+				adapter->ps_state = PS_SLEEP;
+			wake_up_interruptible(&adapter->cmd_wait_q);
+			BT_DBG("HS ACTIVATED!");
+		} else {
+			BT_DBG("HS Enable failed");
+		}
+		break;
+
+	case BT_CMD_MODULE_CFG_REQ:
+		if (priv->btmrvl_dev.sendcmdflag &&
+				event->data[1] == MODULE_BRINGUP_REQ) {
+			BT_DBG("EVENT:%s", (event->data[2]) ?
+				"Bring-up failed" : "Bring-up succeed");
+		} else if (priv->btmrvl_dev.sendcmdflag &&
+				event->data[1] == MODULE_SHUTDOWN_REQ) {
+			BT_DBG("EVENT:%s", (event->data[2]) ?
+				"Shutdown failed" : "Shutdown succeed");
+		} else {
+			BT_DBG("BT_CMD_MODULE_CFG_REQ resp for APP");
+			ret = -EINVAL;
+		}
+		break;
+
+	case BT_EVENT_POWER_STATE:
+		if (event->data[1] == BT_PS_SLEEP)
+			adapter->ps_state = PS_SLEEP;
+		BT_DBG("EVENT:%s",
+			(adapter->ps_state) ? "PS_SLEEP" : "PS_AWAKE");
+		break;
+
+	default:
+		BT_DBG("Unknown Event=%d", event->data[0]);
+		ret = -EINVAL;
+		break;
+	}
+
+exit:
+	if (!ret)
+		kfree_skb(skb);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(btmrvl_process_event);
+
+int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd)
+{
+	struct sk_buff *skb;
+	struct btmrvl_cmd *cmd;
+	int ret = 0;
+
+	skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
+	if (skb == NULL) {
+		BT_ERR("No free skb");
+		return -ENOMEM;
+	}
+
+	cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
+	cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_MODULE_CFG_REQ));
+	cmd->length = 1;
+	cmd->data[0] = subcmd;
+
+	bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
+
+	skb->dev = (void *) priv->btmrvl_dev.hcidev;
+	skb_queue_head(&priv->adapter->tx_queue, skb);
+
+	priv->btmrvl_dev.sendcmdflag = true;
+
+	priv->adapter->cmd_complete = false;
+
+	BT_DBG("Queue module cfg Command");
+
+	wake_up_interruptible(&priv->main_thread.wait_q);
+
+	if (!wait_event_interruptible_timeout(priv->adapter->cmd_wait_q,
+				priv->adapter->cmd_complete,
+				msecs_to_jiffies(WAIT_UNTIL_CMD_RESP))) {
+		ret = -ETIMEDOUT;
+		BT_ERR("module_cfg_cmd(%x): timeout: %d",
+					subcmd, priv->btmrvl_dev.sendcmdflag);
+	}
+
+	BT_DBG("module cfg Command done");
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(btmrvl_send_module_cfg_cmd);
+
+static int btmrvl_enable_hs(struct btmrvl_private *priv)
+{
+	struct sk_buff *skb;
+	struct btmrvl_cmd *cmd;
+	int ret = 0;
+
+	skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
+	if (skb == NULL) {
+		BT_ERR("No free skb");
+		return -ENOMEM;
+	}
+
+	cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
+	cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_HOST_SLEEP_ENABLE));
+	cmd->length = 0;
+
+	bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
+
+	skb->dev = (void *) priv->btmrvl_dev.hcidev;
+	skb_queue_head(&priv->adapter->tx_queue, skb);
+
+	BT_DBG("Queue hs enable Command");
+
+	wake_up_interruptible(&priv->main_thread.wait_q);
+
+	if (!wait_event_interruptible_timeout(priv->adapter->cmd_wait_q,
+			priv->adapter->hs_state,
+			msecs_to_jiffies(WAIT_UNTIL_HS_STATE_CHANGED))) {
+		ret = -ETIMEDOUT;
+		BT_ERR("timeout: %d, %d,%d", priv->adapter->hs_state,
+						priv->adapter->ps_state,
+						priv->adapter->wakeup_tries);
+	}
+
+	return ret;
+}
+
+int btmrvl_prepare_command(struct btmrvl_private *priv)
+{
+	struct sk_buff *skb = NULL;
+	struct btmrvl_cmd *cmd;
+	int ret = 0;
+
+	if (priv->btmrvl_dev.hscfgcmd) {
+		priv->btmrvl_dev.hscfgcmd = 0;
+
+		skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
+		if (skb == NULL) {
+			BT_ERR("No free skb");
+			return -ENOMEM;
+		}
+
+		cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
+		cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_HOST_SLEEP_CONFIG));
+		cmd->length = 2;
+		cmd->data[0] = (priv->btmrvl_dev.gpio_gap & 0xff00) >> 8;
+		cmd->data[1] = (u8) (priv->btmrvl_dev.gpio_gap & 0x00ff);
+
+		bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
+
+		skb->dev = (void *) priv->btmrvl_dev.hcidev;
+		skb_queue_head(&priv->adapter->tx_queue, skb);
+
+		BT_DBG("Queue HSCFG Command, gpio=0x%x, gap=0x%x",
+						cmd->data[0], cmd->data[1]);
+	}
+
+	if (priv->btmrvl_dev.pscmd) {
+		priv->btmrvl_dev.pscmd = 0;
+
+		skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
+		if (skb == NULL) {
+			BT_ERR("No free skb");
+			return -ENOMEM;
+		}
+
+		cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
+		cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_AUTO_SLEEP_MODE));
+		cmd->length = 1;
+
+		if (priv->btmrvl_dev.psmode)
+			cmd->data[0] = BT_PS_ENABLE;
+		else
+			cmd->data[0] = BT_PS_DISABLE;
+
+		bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
+
+		skb->dev = (void *) priv->btmrvl_dev.hcidev;
+		skb_queue_head(&priv->adapter->tx_queue, skb);
+
+		BT_DBG("Queue PSMODE Command:%d", cmd->data[0]);
+	}
+
+	if (priv->btmrvl_dev.hscmd) {
+		priv->btmrvl_dev.hscmd = 0;
+
+		if (priv->btmrvl_dev.hsmode) {
+			ret = btmrvl_enable_hs(priv);
+		} else {
+			ret = priv->hw_wakeup_firmware(priv);
+			priv->adapter->hs_state = HS_DEACTIVATED;
+		}
+	}
+
+	return ret;
+}
+
+static int btmrvl_tx_pkt(struct btmrvl_private *priv, struct sk_buff *skb)
+{
+	int ret = 0;
+
+	if (!skb || !skb->data)
+		return -EINVAL;
+
+	if (!skb->len || ((skb->len + BTM_HEADER_LEN) > BTM_UPLD_SIZE)) {
+		BT_ERR("Tx Error: Bad skb length %d : %d",
+						skb->len, BTM_UPLD_SIZE);
+		return -EINVAL;
+	}
+
+	if (skb_headroom(skb) < BTM_HEADER_LEN) {
+		struct sk_buff *tmp = skb;
+
+		skb = skb_realloc_headroom(skb, BTM_HEADER_LEN);
+		if (!skb) {
+			BT_ERR("Tx Error: realloc_headroom failed %d",
+				BTM_HEADER_LEN);
+			skb = tmp;
+			return -EINVAL;
+		}
+
+		kfree_skb(tmp);
+	}
+
+	skb_push(skb, BTM_HEADER_LEN);
+
+	/* header type: byte[3]
+	 * HCI_COMMAND = 1, ACL_DATA = 2, SCO_DATA = 3, 0xFE = Vendor
+	 * header length: byte[2][1][0]
+	 */
+
+	skb->data[0] = (skb->len & 0x0000ff);
+	skb->data[1] = (skb->len & 0x00ff00) >> 8;
+	skb->data[2] = (skb->len & 0xff0000) >> 16;
+	skb->data[3] = bt_cb(skb)->pkt_type;
+
+	if (priv->hw_host_to_card)
+		ret = priv->hw_host_to_card(priv, skb->data, skb->len);
+
+	return ret;
+}
+
+static void btmrvl_init_adapter(struct btmrvl_private *priv)
+{
+	skb_queue_head_init(&priv->adapter->tx_queue);
+
+	priv->adapter->ps_state = PS_AWAKE;
+
+	init_waitqueue_head(&priv->adapter->cmd_wait_q);
+}
+
+static void btmrvl_free_adapter(struct btmrvl_private *priv)
+{
+	skb_queue_purge(&priv->adapter->tx_queue);
+
+	kfree(priv->adapter);
+
+	priv->adapter = NULL;
+}
+
+static int btmrvl_ioctl(struct hci_dev *hdev,
+				unsigned int cmd, unsigned long arg)
+{
+	return -ENOIOCTLCMD;
+}
+
+static void btmrvl_destruct(struct hci_dev *hdev)
+{
+}
+
+static int btmrvl_send_frame(struct sk_buff *skb)
+{
+	struct hci_dev *hdev = (struct hci_dev *) skb->dev;
+	struct btmrvl_private *priv = NULL;
+
+	BT_DBG("type=%d, len=%d", skb->pkt_type, skb->len);
+
+	if (!hdev || !hdev->driver_data) {
+		BT_ERR("Frame for unknown HCI device");
+		return -ENODEV;
+	}
+
+	priv = (struct btmrvl_private *) hdev->driver_data;
+	if (!test_bit(HCI_RUNNING, &hdev->flags)) {
+		BT_ERR("Failed testing HCI_RUNING, flags=%lx", hdev->flags);
+		print_hex_dump_bytes("data: ", DUMP_PREFIX_OFFSET,
+							skb->data, skb->len);
+		return -EBUSY;
+	}
+
+	switch (bt_cb(skb)->pkt_type) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+	}
+
+	skb_queue_tail(&priv->adapter->tx_queue, skb);
+
+	wake_up_interruptible(&priv->main_thread.wait_q);
+
+	return 0;
+}
+
+static int btmrvl_flush(struct hci_dev *hdev)
+{
+	struct btmrvl_private *priv = hdev->driver_data;
+
+	skb_queue_purge(&priv->adapter->tx_queue);
+
+	return 0;
+}
+
+static int btmrvl_close(struct hci_dev *hdev)
+{
+	struct btmrvl_private *priv = hdev->driver_data;
+
+	if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
+		return 0;
+
+	skb_queue_purge(&priv->adapter->tx_queue);
+
+	return 0;
+}
+
+static int btmrvl_open(struct hci_dev *hdev)
+{
+	set_bit(HCI_RUNNING, &hdev->flags);
+
+	return 0;
+}
+
+/*
+ * This function handles the event generated by firmware, rx data
+ * received from firmware, and tx data sent from kernel.
+ */
+static int btmrvl_service_main_thread(void *data)
+{
+	struct btmrvl_thread *thread = data;
+	struct btmrvl_private *priv = thread->priv;
+	struct btmrvl_adapter *adapter = priv->adapter;
+	wait_queue_t wait;
+	struct sk_buff *skb;
+	ulong flags;
+
+	init_waitqueue_entry(&wait, current);
+
+	current->flags |= PF_NOFREEZE;
+
+	for (;;) {
+		add_wait_queue(&thread->wait_q, &wait);
+
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		if (adapter->wakeup_tries ||
+				((!adapter->int_count) &&
+				(!priv->btmrvl_dev.tx_dnld_rdy ||
+				skb_queue_empty(&adapter->tx_queue)))) {
+			BT_DBG("main_thread is sleeping...");
+			schedule();
+		}
+
+		set_current_state(TASK_RUNNING);
+
+		remove_wait_queue(&thread->wait_q, &wait);
+
+		BT_DBG("main_thread woke up");
+
+		if (kthread_should_stop()) {
+			BT_DBG("main_thread: break from main thread");
+			break;
+		}
+
+		spin_lock_irqsave(&priv->driver_lock, flags);
+		if (adapter->int_count) {
+			adapter->int_count = 0;
+		} else if (adapter->ps_state == PS_SLEEP &&
+					!skb_queue_empty(&adapter->tx_queue)) {
+			spin_unlock_irqrestore(&priv->driver_lock, flags);
+			adapter->wakeup_tries++;
+			priv->hw_wakeup_firmware(priv);
+			continue;
+		}
+		spin_unlock_irqrestore(&priv->driver_lock, flags);
+
+		if (adapter->ps_state == PS_SLEEP)
+			continue;
+
+		if (!priv->btmrvl_dev.tx_dnld_rdy)
+			continue;
+
+		skb = skb_dequeue(&adapter->tx_queue);
+		if (skb) {
+			if (btmrvl_tx_pkt(priv, skb))
+				priv->btmrvl_dev.hcidev->stat.err_tx++;
+			else
+				priv->btmrvl_dev.hcidev->stat.byte_tx += skb->len;
+
+			kfree_skb(skb);
+		}
+	}
+
+	return 0;
+}
+
+struct btmrvl_private *btmrvl_add_card(void *card)
+{
+	struct hci_dev *hdev = NULL;
+	struct btmrvl_private *priv;
+	int ret;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		BT_ERR("Can not allocate priv");
+		goto err_priv;
+	}
+
+	priv->adapter = kzalloc(sizeof(*priv->adapter), GFP_KERNEL);
+	if (!priv->adapter) {
+		BT_ERR("Allocate buffer for btmrvl_adapter failed!");
+		goto err_adapter;
+	}
+
+	btmrvl_init_adapter(priv);
+
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Can not allocate HCI device");
+		goto err_hdev;
+	}
+
+	BT_DBG("Starting kthread...");
+	priv->main_thread.priv = priv;
+	spin_lock_init(&priv->driver_lock);
+
+	init_waitqueue_head(&priv->main_thread.wait_q);
+	priv->main_thread.task = kthread_run(btmrvl_service_main_thread,
+				&priv->main_thread, "btmrvl_main_service");
+
+	priv->btmrvl_dev.hcidev = hdev;
+	priv->btmrvl_dev.card = card;
+
+	hdev->driver_data = priv;
+
+	priv->btmrvl_dev.tx_dnld_rdy = true;
+
+	hdev->type = HCI_SDIO;
+	hdev->open = btmrvl_open;
+	hdev->close = btmrvl_close;
+	hdev->flush = btmrvl_flush;
+	hdev->send = btmrvl_send_frame;
+	hdev->destruct = btmrvl_destruct;
+	hdev->ioctl = btmrvl_ioctl;
+	hdev->owner = THIS_MODULE;
+
+	ret = hci_register_dev(hdev);
+	if (ret < 0) {
+		BT_ERR("Can not register HCI device");
+		goto err_hci_register_dev;
+	}
+
+#ifdef CONFIG_DEBUG_FS
+	btmrvl_debugfs_init(hdev);
+#endif
+
+	return priv;
+
+err_hci_register_dev:
+	/* Stop the thread servicing the interrupts */
+	kthread_stop(priv->main_thread.task);
+
+	hci_free_dev(hdev);
+
+err_hdev:
+	btmrvl_free_adapter(priv);
+
+err_adapter:
+	kfree(priv);
+
+err_priv:
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(btmrvl_add_card);
+
+int btmrvl_remove_card(struct btmrvl_private *priv)
+{
+	struct hci_dev *hdev;
+
+	hdev = priv->btmrvl_dev.hcidev;
+
+	wake_up_interruptible(&priv->adapter->cmd_wait_q);
+
+	kthread_stop(priv->main_thread.task);
+
+#ifdef CONFIG_DEBUG_FS
+	btmrvl_debugfs_remove(hdev);
+#endif
+
+	hci_unregister_dev(hdev);
+
+	hci_free_dev(hdev);
+
+	priv->btmrvl_dev.hcidev = NULL;
+
+	btmrvl_free_adapter(priv);
+
+	kfree(priv);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btmrvl_remove_card);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell Bluetooth driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
new file mode 100644
index 000000000000..1cfa8b4ace50
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -0,0 +1,1002 @@
+/**
+ * Marvell BT-over-SDIO driver: SDIO interface related functions.
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ **/
+
+#include <linux/firmware.h>
+
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btmrvl_drv.h"
+#include "btmrvl_sdio.h"
+
+#define VERSION "1.0"
+
+/* The btmrvl_sdio_remove() callback function is called
+ * when user removes this module from kernel space or ejects
+ * the card from the slot. The driver handles these 2 cases
+ * differently.
+ * If the user is removing the module, a MODULE_SHUTDOWN_REQ
+ * command is sent to firmware and interrupt will be disabled.
+ * If the card is removed, there is no need to send command
+ * or disable interrupt.
+ *
+ * The variable 'user_rmmod' is used to distinguish these two
+ * scenarios. This flag is initialized as FALSE in case the card
+ * is removed, and will be set to TRUE for module removal when
+ * module_exit function is called.
+ */
+static u8 user_rmmod;
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd6888 = {
+	.helper		= "sd8688_helper.bin",
+	.firmware	= "sd8688.bin",
+};
+
+static const struct sdio_device_id btmrvl_sdio_ids[] = {
+	/* Marvell SD8688 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
+			.driver_data = (unsigned long) &btmrvl_sdio_sd6888 },
+
+	{ }	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(sdio, btmrvl_sdio_ids);
+
+static int btmrvl_sdio_get_rx_unit(struct btmrvl_sdio_card *card)
+{
+	u8 reg;
+	int ret;
+
+	reg = sdio_readb(card->func, CARD_RX_UNIT_REG, &ret);
+	if (!ret)
+		card->rx_unit = reg;
+
+	return ret;
+}
+
+static int btmrvl_sdio_read_fw_status(struct btmrvl_sdio_card *card, u16 *dat)
+{
+	u8 fws0, fws1;
+	int ret;
+
+	*dat = 0;
+
+	fws0 = sdio_readb(card->func, CARD_FW_STATUS0_REG, &ret);
+
+	if (!ret)
+		fws1 = sdio_readb(card->func, CARD_FW_STATUS1_REG, &ret);
+
+	if (ret)
+		return -EIO;
+
+	*dat = (((u16) fws1) << 8) | fws0;
+
+	return 0;
+}
+
+static int btmrvl_sdio_read_rx_len(struct btmrvl_sdio_card *card, u16 *dat)
+{
+	u8 reg;
+	int ret;
+
+	reg = sdio_readb(card->func, CARD_RX_LEN_REG, &ret);
+	if (!ret)
+		*dat = (u16) reg << card->rx_unit;
+
+	return ret;
+}
+
+static int btmrvl_sdio_enable_host_int_mask(struct btmrvl_sdio_card *card,
+								u8 mask)
+{
+	int ret;
+
+	sdio_writeb(card->func, mask, HOST_INT_MASK_REG, &ret);
+	if (ret) {
+		BT_ERR("Unable to enable the host interrupt!");
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int btmrvl_sdio_disable_host_int_mask(struct btmrvl_sdio_card *card,
+								u8 mask)
+{
+	u8 host_int_mask;
+	int ret;
+
+	host_int_mask = sdio_readb(card->func, HOST_INT_MASK_REG, &ret);
+	if (ret)
+		return -EIO;
+
+	host_int_mask &= ~mask;
+
+	sdio_writeb(card->func, host_int_mask, HOST_INT_MASK_REG, &ret);
+	if (ret < 0) {
+		BT_ERR("Unable to disable the host interrupt!");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int btmrvl_sdio_poll_card_status(struct btmrvl_sdio_card *card, u8 bits)
+{
+	unsigned int tries;
+	u8 status;
+	int ret;
+
+	for (tries = 0; tries < MAX_POLL_TRIES * 1000; tries++) {
+		status = sdio_readb(card->func, CARD_STATUS_REG, &ret);
+		if (ret)
+			goto failed;
+		if ((status & bits) == bits)
+			return ret;
+
+		udelay(1);
+	}
+
+	ret = -ETIMEDOUT;
+
+failed:
+	BT_ERR("FAILED! ret=%d", ret);
+
+	return ret;
+}
+
+static int btmrvl_sdio_verify_fw_download(struct btmrvl_sdio_card *card,
+								int pollnum)
+{
+	int ret = -ETIMEDOUT;
+	u16 firmwarestat;
+	unsigned int tries;
+
+	 /* Wait for firmware to become ready */
+	for (tries = 0; tries < pollnum; tries++) {
+		if (btmrvl_sdio_read_fw_status(card, &firmwarestat) < 0)
+			continue;
+
+		if (firmwarestat == FIRMWARE_READY) {
+			ret = 0;
+			break;
+		} else {
+			msleep(10);
+		}
+	}
+
+	return ret;
+}
+
+static int btmrvl_sdio_download_helper(struct btmrvl_sdio_card *card)
+{
+	const struct firmware *fw_helper = NULL;
+	const u8 *helper = NULL;
+	int ret;
+	void *tmphlprbuf = NULL;
+	int tmphlprbufsz, hlprblknow, helperlen;
+	u8 *helperbuf;
+	u32 tx_len;
+
+	ret = request_firmware(&fw_helper, card->helper,
+						&card->func->dev);
+	if ((ret < 0) || !fw_helper) {
+		BT_ERR("request_firmware(helper) failed, error code = %d",
+									ret);
+		ret = -ENOENT;
+		goto done;
+	}
+
+	helper = fw_helper->data;
+	helperlen = fw_helper->size;
+
+	BT_DBG("Downloading helper image (%d bytes), block size %d bytes",
+						helperlen, SDIO_BLOCK_SIZE);
+
+	tmphlprbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN);
+
+	tmphlprbuf = kmalloc(tmphlprbufsz, GFP_KERNEL);
+	if (!tmphlprbuf) {
+		BT_ERR("Unable to allocate buffer for helper."
+			" Terminating download");
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	memset(tmphlprbuf, 0, tmphlprbufsz);
+
+	helperbuf = (u8 *) ALIGN_ADDR(tmphlprbuf, BTSDIO_DMA_ALIGN);
+
+	/* Perform helper data transfer */
+	tx_len = (FIRMWARE_TRANSFER_NBLOCK * SDIO_BLOCK_SIZE)
+			- SDIO_HEADER_LEN;
+	hlprblknow = 0;
+
+	do {
+		ret = btmrvl_sdio_poll_card_status(card,
+					    CARD_IO_READY | DN_LD_CARD_RDY);
+		if (ret < 0) {
+			BT_ERR("Helper download poll status timeout @ %d",
+				hlprblknow);
+			goto done;
+		}
+
+		/* Check if there is more data? */
+		if (hlprblknow >= helperlen)
+			break;
+
+		if (helperlen - hlprblknow < tx_len)
+			tx_len = helperlen - hlprblknow;
+
+		/* Little-endian */
+		helperbuf[0] = ((tx_len & 0x000000ff) >> 0);
+		helperbuf[1] = ((tx_len & 0x0000ff00) >> 8);
+		helperbuf[2] = ((tx_len & 0x00ff0000) >> 16);
+		helperbuf[3] = ((tx_len & 0xff000000) >> 24);
+
+		memcpy(&helperbuf[SDIO_HEADER_LEN], &helper[hlprblknow],
+				tx_len);
+
+		/* Now send the data */
+		ret = sdio_writesb(card->func, card->ioport, helperbuf,
+				FIRMWARE_TRANSFER_NBLOCK * SDIO_BLOCK_SIZE);
+		if (ret < 0) {
+			BT_ERR("IO error during helper download @ %d",
+				hlprblknow);
+			goto done;
+		}
+
+		hlprblknow += tx_len;
+	} while (true);
+
+	BT_DBG("Transferring helper image EOF block");
+
+	memset(helperbuf, 0x0, SDIO_BLOCK_SIZE);
+
+	ret = sdio_writesb(card->func, card->ioport, helperbuf,
+							SDIO_BLOCK_SIZE);
+	if (ret < 0) {
+		BT_ERR("IO error in writing helper image EOF block");
+		goto done;
+	}
+
+	ret = 0;
+
+done:
+	kfree(tmphlprbuf);
+	if (fw_helper)
+		release_firmware(fw_helper);
+
+	return ret;
+}
+
+static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
+{
+	const struct firmware *fw_firmware = NULL;
+	const u8 *firmware = NULL;
+	int firmwarelen, tmpfwbufsz, ret;
+	unsigned int tries, offset;
+	u8 base0, base1;
+	void *tmpfwbuf = NULL;
+	u8 *fwbuf;
+	u16 len;
+	int txlen = 0, tx_blocks = 0, count = 0;
+
+	ret = request_firmware(&fw_firmware, card->firmware,
+							&card->func->dev);
+	if ((ret < 0) || !fw_firmware) {
+		BT_ERR("request_firmware(firmware) failed, error code = %d",
+									ret);
+		ret = -ENOENT;
+		goto done;
+	}
+
+	firmware = fw_firmware->data;
+	firmwarelen = fw_firmware->size;
+
+	BT_DBG("Downloading FW image (%d bytes)", firmwarelen);
+
+	tmpfwbufsz = ALIGN_SZ(BTM_UPLD_SIZE, BTSDIO_DMA_ALIGN);
+	tmpfwbuf = kmalloc(tmpfwbufsz, GFP_KERNEL);
+	if (!tmpfwbuf) {
+		BT_ERR("Unable to allocate buffer for firmware."
+		       " Terminating download");
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	memset(tmpfwbuf, 0, tmpfwbufsz);
+
+	/* Ensure aligned firmware buffer */
+	fwbuf = (u8 *) ALIGN_ADDR(tmpfwbuf, BTSDIO_DMA_ALIGN);
+
+	/* Perform firmware data transfer */
+	offset = 0;
+	do {
+		ret = btmrvl_sdio_poll_card_status(card,
+					CARD_IO_READY | DN_LD_CARD_RDY);
+		if (ret < 0) {
+			BT_ERR("FW download with helper poll status"
+						" timeout @ %d", offset);
+			goto done;
+		}
+
+		/* Check if there is more data ? */
+		if (offset >= firmwarelen)
+			break;
+
+		for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
+			base0 = sdio_readb(card->func,
+					SQ_READ_BASE_ADDRESS_A0_REG, &ret);
+			if (ret) {
+				BT_ERR("BASE0 register read failed:"
+					" base0 = 0x%04X(%d)."
+					" Terminating download",
+					base0, base0);
+				ret = -EIO;
+				goto done;
+			}
+			base1 = sdio_readb(card->func,
+					SQ_READ_BASE_ADDRESS_A1_REG, &ret);
+			if (ret) {
+				BT_ERR("BASE1 register read failed:"
+					" base1 = 0x%04X(%d)."
+					" Terminating download",
+					base1, base1);
+				ret = -EIO;
+				goto done;
+			}
+
+			len = (((u16) base1) << 8) | base0;
+			if (len)
+				break;
+
+			udelay(10);
+		}
+
+		if (!len)
+			break;
+		else if (len > BTM_UPLD_SIZE) {
+			BT_ERR("FW download failure @%d, invalid length %d",
+								offset, len);
+			ret = -EINVAL;
+			goto done;
+		}
+
+		txlen = len;
+
+		if (len & BIT(0)) {
+			count++;
+			if (count > MAX_WRITE_IOMEM_RETRY) {
+				BT_ERR("FW download failure @%d, "
+					"over max retry count", offset);
+				ret = -EIO;
+				goto done;
+			}
+			BT_ERR("FW CRC error indicated by the helper: "
+				"len = 0x%04X, txlen = %d", len, txlen);
+			len &= ~BIT(0);
+			/* Set txlen to 0 so as to resend from same offset */
+			txlen = 0;
+		} else {
+			count = 0;
+
+			/* Last block ? */
+			if (firmwarelen - offset < txlen)
+				txlen = firmwarelen - offset;
+
+			tx_blocks =
+			    (txlen + SDIO_BLOCK_SIZE - 1) / SDIO_BLOCK_SIZE;
+
+			memcpy(fwbuf, &firmware[offset], txlen);
+		}
+
+		ret = sdio_writesb(card->func, card->ioport, fwbuf,
+					tx_blocks * SDIO_BLOCK_SIZE);
+
+		if (ret < 0) {
+			BT_ERR("FW download, writesb(%d) failed @%d",
+							count, offset);
+			sdio_writeb(card->func, HOST_CMD53_FIN, CONFIG_REG,
+									&ret);
+			if (ret)
+				BT_ERR("writeb failed (CFG)");
+		}
+
+		offset += txlen;
+	} while (true);
+
+	BT_DBG("FW download over, size %d bytes", offset);
+
+	ret = 0;
+
+done:
+	kfree(tmpfwbuf);
+
+	if (fw_firmware)
+		release_firmware(fw_firmware);
+
+	return ret;
+}
+
+static int btmrvl_sdio_card_to_host(struct btmrvl_private *priv)
+{
+	u16 buf_len = 0;
+	int ret, buf_block_len, blksz;
+	struct sk_buff *skb = NULL;
+	u32 type;
+	u8 *payload = NULL;
+	struct hci_dev *hdev = priv->btmrvl_dev.hcidev;
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+
+	if (!card || !card->func) {
+		BT_ERR("card or function is NULL!");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* Read the length of data to be transferred */
+	ret = btmrvl_sdio_read_rx_len(card, &buf_len);
+	if (ret < 0) {
+		BT_ERR("read rx_len failed");
+		ret = -EIO;
+		goto exit;
+	}
+
+	blksz = SDIO_BLOCK_SIZE;
+	buf_block_len = (buf_len + blksz - 1) / blksz;
+
+	if (buf_len <= SDIO_HEADER_LEN
+			|| (buf_block_len * blksz) > ALLOC_BUF_SIZE) {
+		BT_ERR("invalid packet length: %d", buf_len);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* Allocate buffer */
+	skb = bt_skb_alloc(buf_block_len * blksz + BTSDIO_DMA_ALIGN,
+								GFP_ATOMIC);
+	if (skb == NULL) {
+		BT_ERR("No free skb");
+		goto exit;
+	}
+
+	if ((unsigned long) skb->data & (BTSDIO_DMA_ALIGN - 1)) {
+		skb_put(skb, (unsigned long) skb->data &
+					(BTSDIO_DMA_ALIGN - 1));
+		skb_pull(skb, (unsigned long) skb->data &
+					(BTSDIO_DMA_ALIGN - 1));
+	}
+
+	payload = skb->data;
+
+	ret = sdio_readsb(card->func, payload, card->ioport,
+			  buf_block_len * blksz);
+	if (ret < 0) {
+		BT_ERR("readsb failed: %d", ret);
+		ret = -EIO;
+		goto exit;
+	}
+
+	/* This is SDIO specific header length: byte[2][1][0], type: byte[3]
+	 * (HCI_COMMAND = 1, ACL_DATA = 2, SCO_DATA = 3, 0xFE = Vendor)
+	 */
+
+	buf_len = payload[0];
+	buf_len |= (u16) payload[1] << 8;
+	type = payload[3];
+
+	switch (type) {
+	case HCI_ACLDATA_PKT:
+	case HCI_SCODATA_PKT:
+	case HCI_EVENT_PKT:
+		bt_cb(skb)->pkt_type = type;
+		skb->dev = (void *)hdev;
+		skb_put(skb, buf_len);
+		skb_pull(skb, SDIO_HEADER_LEN);
+
+		if (type == HCI_EVENT_PKT)
+			btmrvl_check_evtpkt(priv, skb);
+
+		hci_recv_frame(skb);
+		hdev->stat.byte_rx += buf_len;
+		break;
+
+	case MRVL_VENDOR_PKT:
+		bt_cb(skb)->pkt_type = HCI_VENDOR_PKT;
+		skb->dev = (void *)hdev;
+		skb_put(skb, buf_len);
+		skb_pull(skb, SDIO_HEADER_LEN);
+
+		if (btmrvl_process_event(priv, skb))
+			hci_recv_frame(skb);
+
+		hdev->stat.byte_rx += buf_len;
+		break;
+
+	default:
+		BT_ERR("Unknow packet type:%d", type);
+		print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, payload,
+						blksz * buf_block_len);
+
+		kfree_skb(skb);
+		skb = NULL;
+		break;
+	}
+
+exit:
+	if (ret) {
+		hdev->stat.err_rx++;
+		if (skb)
+			kfree_skb(skb);
+	}
+
+	return ret;
+}
+
+static int btmrvl_sdio_get_int_status(struct btmrvl_private *priv, u8 * ireg)
+{
+	int ret;
+	u8 sdio_ireg = 0;
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+
+	*ireg = 0;
+
+	sdio_ireg = sdio_readb(card->func, HOST_INTSTATUS_REG, &ret);
+	if (ret) {
+		BT_ERR("sdio_readb: read int status register failed");
+		ret = -EIO;
+		goto done;
+	}
+
+	if (sdio_ireg != 0) {
+		/*
+		 * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS
+		 * Clear the interrupt status register and re-enable the
+		 * interrupt.
+		 */
+		BT_DBG("sdio_ireg = 0x%x", sdio_ireg);
+
+		sdio_writeb(card->func, ~(sdio_ireg) & (DN_LD_HOST_INT_STATUS |
+							UP_LD_HOST_INT_STATUS),
+			    HOST_INTSTATUS_REG, &ret);
+		if (ret) {
+			BT_ERR("sdio_writeb: clear int status register "
+				"failed");
+			ret = -EIO;
+			goto done;
+		}
+	}
+
+	if (sdio_ireg & DN_LD_HOST_INT_STATUS) {
+		if (priv->btmrvl_dev.tx_dnld_rdy)
+			BT_DBG("tx_done already received: "
+				" int_status=0x%x", sdio_ireg);
+		else
+			priv->btmrvl_dev.tx_dnld_rdy = true;
+	}
+
+	if (sdio_ireg & UP_LD_HOST_INT_STATUS)
+		btmrvl_sdio_card_to_host(priv);
+
+	*ireg = sdio_ireg;
+
+	ret = 0;
+
+done:
+	return ret;
+}
+
+static void btmrvl_sdio_interrupt(struct sdio_func *func)
+{
+	struct btmrvl_private *priv;
+	struct hci_dev *hcidev;
+	struct btmrvl_sdio_card *card;
+	u8 ireg = 0;
+
+	card = sdio_get_drvdata(func);
+	if (card && card->priv) {
+		priv = card->priv;
+		hcidev = priv->btmrvl_dev.hcidev;
+
+		if (btmrvl_sdio_get_int_status(priv, &ireg))
+			BT_ERR("reading HOST_INT_STATUS_REG failed");
+		else
+			BT_DBG("HOST_INT_STATUS_REG %#x", ireg);
+
+		btmrvl_interrupt(priv);
+	}
+}
+
+static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
+{
+	struct sdio_func *func;
+	u8 reg;
+	int ret = 0;
+
+	if (!card || !card->func) {
+		BT_ERR("Error: card or function is NULL!");
+		ret = -EINVAL;
+		goto failed;
+	}
+
+	func = card->func;
+
+	sdio_claim_host(func);
+
+	ret = sdio_enable_func(func);
+	if (ret) {
+		BT_ERR("sdio_enable_func() failed: ret=%d", ret);
+		ret = -EIO;
+		goto release_host;
+	}
+
+	ret = sdio_claim_irq(func, btmrvl_sdio_interrupt);
+	if (ret) {
+		BT_ERR("sdio_claim_irq failed: ret=%d", ret);
+		ret = -EIO;
+		goto disable_func;
+	}
+
+	ret = sdio_set_block_size(card->func, SDIO_BLOCK_SIZE);
+	if (ret) {
+		BT_ERR("cannot set SDIO block size");
+		ret = -EIO;
+		goto release_irq;
+	}
+
+	reg = sdio_readb(func, IO_PORT_0_REG, &ret);
+	if (ret < 0) {
+		ret = -EIO;
+		goto release_irq;
+	}
+
+	card->ioport = reg;
+
+	reg = sdio_readb(func, IO_PORT_1_REG, &ret);
+	if (ret < 0) {
+		ret = -EIO;
+		goto release_irq;
+	}
+
+	card->ioport |= (reg << 8);
+
+	reg = sdio_readb(func, IO_PORT_2_REG, &ret);
+	if (ret < 0) {
+		ret = -EIO;
+		goto release_irq;
+	}
+
+	card->ioport |= (reg << 16);
+
+	BT_DBG("SDIO FUNC%d IO port: 0x%x", func->num, card->ioport);
+
+	sdio_set_drvdata(func, card);
+
+	sdio_release_host(func);
+
+	return 0;
+
+release_irq:
+	sdio_release_irq(func);
+
+disable_func:
+	sdio_disable_func(func);
+
+release_host:
+	sdio_release_host(func);
+
+failed:
+	return ret;
+}
+
+static int btmrvl_sdio_unregister_dev(struct btmrvl_sdio_card *card)
+{
+	if (card && card->func) {
+		sdio_claim_host(card->func);
+		sdio_release_irq(card->func);
+		sdio_disable_func(card->func);
+		sdio_release_host(card->func);
+		sdio_set_drvdata(card->func, NULL);
+	}
+
+	return 0;
+}
+
+static int btmrvl_sdio_enable_host_int(struct btmrvl_sdio_card *card)
+{
+	int ret;
+
+	if (!card || !card->func)
+		return -EINVAL;
+
+	sdio_claim_host(card->func);
+
+	ret = btmrvl_sdio_enable_host_int_mask(card, HIM_ENABLE);
+
+	btmrvl_sdio_get_rx_unit(card);
+
+	sdio_release_host(card->func);
+
+	return ret;
+}
+
+static int btmrvl_sdio_disable_host_int(struct btmrvl_sdio_card *card)
+{
+	int ret;
+
+	if (!card || !card->func)
+		return -EINVAL;
+
+	sdio_claim_host(card->func);
+
+	ret = btmrvl_sdio_disable_host_int_mask(card, HIM_DISABLE);
+
+	sdio_release_host(card->func);
+
+	return ret;
+}
+
+static int btmrvl_sdio_host_to_card(struct btmrvl_private *priv,
+				u8 *payload, u16 nb)
+{
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+	int ret = 0;
+	int buf_block_len;
+	int blksz;
+	int i = 0;
+	u8 *buf = NULL;
+	void *tmpbuf = NULL;
+	int tmpbufsz;
+
+	if (!card || !card->func) {
+		BT_ERR("card or function is NULL!");
+		return -EINVAL;
+	}
+
+	buf = payload;
+	if ((unsigned long) payload & (BTSDIO_DMA_ALIGN - 1)) {
+		tmpbufsz = ALIGN_SZ(nb, BTSDIO_DMA_ALIGN);
+		tmpbuf = kmalloc(tmpbufsz, GFP_KERNEL);
+		memset(tmpbuf, 0, tmpbufsz);
+		buf = (u8 *) ALIGN_ADDR(tmpbuf, BTSDIO_DMA_ALIGN);
+		memcpy(buf, payload, nb);
+	}
+
+	blksz = SDIO_BLOCK_SIZE;
+	buf_block_len = (nb + blksz - 1) / blksz;
+
+	sdio_claim_host(card->func);
+
+	do {
+		/* Transfer data to card */
+		ret = sdio_writesb(card->func, card->ioport, buf,
+				   buf_block_len * blksz);
+		if (ret < 0) {
+			i++;
+			BT_ERR("i=%d writesb failed: %d", i, ret);
+			print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
+						payload, nb);
+			ret = -EIO;
+			if (i > MAX_WRITE_IOMEM_RETRY)
+				goto exit;
+		}
+	} while (ret);
+
+	priv->btmrvl_dev.tx_dnld_rdy = false;
+
+exit:
+	sdio_release_host(card->func);
+
+	return ret;
+}
+
+static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
+{
+	int ret = 0;
+
+	if (!card || !card->func) {
+		BT_ERR("card or function is NULL!");
+		return -EINVAL;
+	}
+	sdio_claim_host(card->func);
+
+	if (!btmrvl_sdio_verify_fw_download(card, 1)) {
+		BT_DBG("Firmware already downloaded!");
+		goto done;
+	}
+
+	ret = btmrvl_sdio_download_helper(card);
+	if (ret) {
+		BT_ERR("Failed to download helper!");
+		ret = -EIO;
+		goto done;
+	}
+
+	if (btmrvl_sdio_download_fw_w_helper(card)) {
+		BT_ERR("Failed to download firmware!");
+		ret = -EIO;
+		goto done;
+	}
+
+	if (btmrvl_sdio_verify_fw_download(card, MAX_POLL_TRIES)) {
+		BT_ERR("FW failed to be active in time!");
+		ret = -ETIMEDOUT;
+		goto done;
+	}
+
+done:
+	sdio_release_host(card->func);
+
+	return ret;
+}
+
+static int btmrvl_sdio_wakeup_fw(struct btmrvl_private *priv)
+{
+	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
+	int ret = 0;
+
+	if (!card || !card->func) {
+		BT_ERR("card or function is NULL!");
+		return -EINVAL;
+	}
+
+	sdio_claim_host(card->func);
+
+	sdio_writeb(card->func, HOST_POWER_UP, CONFIG_REG, &ret);
+
+	sdio_release_host(card->func);
+
+	BT_DBG("wake up firmware");
+
+	return ret;
+}
+
+static int btmrvl_sdio_probe(struct sdio_func *func,
+					const struct sdio_device_id *id)
+{
+	int ret = 0;
+	struct btmrvl_private *priv = NULL;
+	struct btmrvl_sdio_card *card = NULL;
+
+	BT_INFO("vendor=0x%x, device=0x%x, class=%d, fn=%d",
+			id->vendor, id->device, id->class, func->num);
+
+	card = kzalloc(sizeof(*card), GFP_KERNEL);
+	if (!card) {
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	card->func = func;
+
+	if (id->driver_data) {
+		struct btmrvl_sdio_device *data = (void *) id->driver_data;
+		card->helper   = data->helper;
+		card->firmware = data->firmware;
+	}
+
+	if (btmrvl_sdio_register_dev(card) < 0) {
+		BT_ERR("Failed to register BT device!");
+		ret = -ENODEV;
+		goto free_card;
+	}
+
+	/* Disable the interrupts on the card */
+	btmrvl_sdio_disable_host_int(card);
+
+	if (btmrvl_sdio_download_fw(card)) {
+		BT_ERR("Downloading firmware failed!");
+		ret = -ENODEV;
+		goto unreg_dev;
+	}
+
+	msleep(100);
+
+	btmrvl_sdio_enable_host_int(card);
+
+	priv = btmrvl_add_card(card);
+	if (!priv) {
+		BT_ERR("Initializing card failed!");
+		ret = -ENODEV;
+		goto disable_host_int;
+	}
+
+	card->priv = priv;
+
+	/* Initialize the interface specific function pointers */
+	priv->hw_host_to_card = btmrvl_sdio_host_to_card;
+	priv->hw_wakeup_firmware = btmrvl_sdio_wakeup_fw;
+
+	btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
+
+	return 0;
+
+disable_host_int:
+	btmrvl_sdio_disable_host_int(card);
+unreg_dev:
+	btmrvl_sdio_unregister_dev(card);
+free_card:
+	kfree(card);
+done:
+	return ret;
+}
+
+static void btmrvl_sdio_remove(struct sdio_func *func)
+{
+	struct btmrvl_sdio_card *card;
+
+	if (func) {
+		card = sdio_get_drvdata(func);
+		if (card) {
+			/* Send SHUTDOWN command & disable interrupt
+			 * if user removes the module.
+			 */
+			if (user_rmmod) {
+				btmrvl_send_module_cfg_cmd(card->priv,
+							MODULE_SHUTDOWN_REQ);
+				btmrvl_sdio_disable_host_int(card);
+			}
+			BT_DBG("unregester dev");
+			btmrvl_sdio_unregister_dev(card);
+			btmrvl_remove_card(card->priv);
+			kfree(card);
+		}
+	}
+}
+
+static struct sdio_driver bt_mrvl_sdio = {
+	.name		= "btmrvl_sdio",
+	.id_table	= btmrvl_sdio_ids,
+	.probe		= btmrvl_sdio_probe,
+	.remove		= btmrvl_sdio_remove,
+};
+
+static int btmrvl_sdio_init_module(void)
+{
+	if (sdio_register_driver(&bt_mrvl_sdio) != 0) {
+		BT_ERR("SDIO Driver Registration Failed");
+		return -ENODEV;
+	}
+
+	/* Clear the flag in case user removes the card. */
+	user_rmmod = 0;
+
+	return 0;
+}
+
+static void btmrvl_sdio_exit_module(void)
+{
+	/* Set the flag as user is removing this module. */
+	user_rmmod = 1;
+
+	sdio_unregister_driver(&bt_mrvl_sdio);
+}
+
+module_init(btmrvl_sdio_init_module);
+module_exit(btmrvl_sdio_exit_module);
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell BT-over-SDIO driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
new file mode 100644
index 000000000000..27329f107e5a
--- /dev/null
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -0,0 +1,108 @@
+/**
+ * Marvell BT-over-SDIO driver: SDIO interface related definitions
+ *
+ * Copyright (C) 2009, Marvell International Ltd.
+ *
+ * This software file (the "File") is distributed by Marvell International
+ * Ltd. under the terms of the GNU General Public License Version 2, June 1991
+ * (the "License").  You may use, redistribute and/or modify this File in
+ * accordance with the terms and conditions of the License, a copy of which
+ * is available by writing to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
+ * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
+ *
+ *
+ * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
+ * ARE EXPRESSLY DISCLAIMED.  The License provides additional details about
+ * this warranty disclaimer.
+ *
+ **/
+
+#define SDIO_HEADER_LEN			4
+
+/* SD block size can not bigger than 64 due to buf size limit in firmware */
+/* define SD block size for data Tx/Rx */
+#define SDIO_BLOCK_SIZE			64
+
+/* Number of blocks for firmware transfer */
+#define FIRMWARE_TRANSFER_NBLOCK	2
+
+/* This is for firmware specific length */
+#define FW_EXTRA_LEN			36
+
+#define MRVDRV_SIZE_OF_CMD_BUFFER       (2 * 1024)
+
+#define MRVDRV_BT_RX_PACKET_BUFFER_SIZE \
+	(HCI_MAX_FRAME_SIZE + FW_EXTRA_LEN)
+
+#define ALLOC_BUF_SIZE	(((max_t (int, MRVDRV_BT_RX_PACKET_BUFFER_SIZE, \
+			MRVDRV_SIZE_OF_CMD_BUFFER) + SDIO_HEADER_LEN \
+			+ SDIO_BLOCK_SIZE - 1) / SDIO_BLOCK_SIZE) \
+			* SDIO_BLOCK_SIZE)
+
+/* The number of times to try when polling for status */
+#define MAX_POLL_TRIES			100
+
+/* Max retry number of CMD53 write */
+#define MAX_WRITE_IOMEM_RETRY		2
+
+/* Host Control Registers */
+#define IO_PORT_0_REG			0x00
+#define IO_PORT_1_REG			0x01
+#define IO_PORT_2_REG			0x02
+
+#define CONFIG_REG			0x03
+#define HOST_POWER_UP			BIT(1)
+#define HOST_CMD53_FIN			BIT(2)
+
+#define HOST_INT_MASK_REG		0x04
+#define HIM_DISABLE			0xff
+#define HIM_ENABLE			(BIT(0) | BIT(1))
+
+#define HOST_INTSTATUS_REG		0x05
+#define UP_LD_HOST_INT_STATUS		BIT(0)
+#define DN_LD_HOST_INT_STATUS		BIT(1)
+
+/* Card Control Registers */
+#define SQ_READ_BASE_ADDRESS_A0_REG  	0x10
+#define SQ_READ_BASE_ADDRESS_A1_REG  	0x11
+
+#define CARD_STATUS_REG              	0x20
+#define DN_LD_CARD_RDY               	BIT(0)
+#define CARD_IO_READY              	BIT(3)
+
+#define CARD_FW_STATUS0_REG		0x40
+#define CARD_FW_STATUS1_REG		0x41
+#define FIRMWARE_READY			0xfedc
+
+#define CARD_RX_LEN_REG			0x42
+#define CARD_RX_UNIT_REG		0x43
+
+
+struct btmrvl_sdio_card {
+	struct sdio_func *func;
+	u32 ioport;
+	const char *helper;
+	const char *firmware;
+	u8 rx_unit;
+	struct btmrvl_private *priv;
+};
+
+struct btmrvl_sdio_device {
+	const char *helper;
+	const char *firmware;
+};
+
+
+/* Platform specific DMA alignment */
+#define BTSDIO_DMA_ALIGN		8
+
+/* Macros for Data Alignment : size */
+#define ALIGN_SZ(p, a)	\
+	(((p) + ((a) - 1)) & ~((a) - 1))
+
+/* Macros for Data Alignment : address */
+#define ALIGN_ADDR(p, a)	\
+	((((unsigned long)(p)) + (((unsigned long)(a)) - 1)) & \
+					~(((unsigned long)(a)) - 1))
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index e70c57ee4221..124db8cd144c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -301,7 +301,7 @@ static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
 	struct urb *urb;
 	unsigned char *buf;
 	unsigned int pipe;
-	int err, size;
+	int err, size = HCI_MAX_FRAME_SIZE;
 
 	BT_DBG("%s", hdev->name);
 
@@ -312,8 +312,6 @@ static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
 	if (!urb)
 		return -ENOMEM;
 
-	size = le16_to_cpu(data->bulk_rx_ep->wMaxPacketSize);
-
 	buf = kmalloc(size, mem_flags);
 	if (!buf) {
 		usb_free_urb(urb);
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index e919fca1072a..06b072fd6d54 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -190,7 +190,7 @@ struct l2cap_conf_rfc {
 #define L2CAP_MODE_RETRANS	0x01
 #define L2CAP_MODE_FLOWCTL	0x02
 #define L2CAP_MODE_ERTM		0x03
-#define L2CAP_MODE_STREAM	0x04
+#define L2CAP_MODE_STREAMING	0x04
 
 struct l2cap_disconn_req {
 	__le16     dcid;
@@ -271,9 +271,11 @@ struct l2cap_pinfo {
 	__u16		imtu;
 	__u16		omtu;
 	__u16		flush_to;
-	__u8            sec_level;
+	__u8		mode;
+	__u8		fcs;
+	__u8		sec_level;
 	__u8		role_switch;
-	__u8            force_reliable;
+	__u8		force_reliable;
 
 	__u8		conf_req[64];
 	__u8		conf_len;
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index b18676870d55..a9f7afb6ee35 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -374,6 +374,7 @@ static void hidp_process_hid_control(struct hidp_session *session,
 
 		/* Kill session thread */
 		atomic_inc(&session->terminate);
+		hidp_schedule(session);
 	}
 }
 
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index bd0a4c1bced0..7ce1a24735c8 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -50,7 +50,9 @@
 #include <net/bluetooth/hci_core.h>
 #include <net/bluetooth/l2cap.h>
 
-#define VERSION "2.13"
+#define VERSION "2.14"
+
+static int enable_ertm = 0;
 
 static u32 l2cap_feat_mask = L2CAP_FEAT_FIXED_CHAN;
 static u8 l2cap_fixed_chan[8] = { 0x02, };
@@ -715,12 +717,16 @@ static void l2cap_sock_init(struct sock *sk, struct sock *parent)
 
 		pi->imtu = l2cap_pi(parent)->imtu;
 		pi->omtu = l2cap_pi(parent)->omtu;
+		pi->mode = l2cap_pi(parent)->mode;
+		pi->fcs  = l2cap_pi(parent)->fcs;
 		pi->sec_level = l2cap_pi(parent)->sec_level;
 		pi->role_switch = l2cap_pi(parent)->role_switch;
 		pi->force_reliable = l2cap_pi(parent)->force_reliable;
 	} else {
 		pi->imtu = L2CAP_DEFAULT_MTU;
 		pi->omtu = 0;
+		pi->mode = L2CAP_MODE_BASIC;
+		pi->fcs  = L2CAP_FCS_CRC16;
 		pi->sec_level = BT_SECURITY_LOW;
 		pi->role_switch = 0;
 		pi->force_reliable = 0;
@@ -956,6 +962,18 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr, int al
 		goto done;
 	}
 
+	switch (l2cap_pi(sk)->mode) {
+	case L2CAP_MODE_BASIC:
+		break;
+	case L2CAP_MODE_ERTM:
+		if (enable_ertm)
+			break;
+		/* fall through */
+	default:
+		err = -ENOTSUPP;
+		goto done;
+	}
+
 	switch (sk->sk_state) {
 	case BT_CONNECT:
 	case BT_CONNECT2:
@@ -1007,6 +1025,18 @@ static int l2cap_sock_listen(struct socket *sock, int backlog)
 		goto done;
 	}
 
+	switch (l2cap_pi(sk)->mode) {
+	case L2CAP_MODE_BASIC:
+		break;
+	case L2CAP_MODE_ERTM:
+		if (enable_ertm)
+			break;
+		/* fall through */
+	default:
+		err = -ENOTSUPP;
+		goto done;
+	}
+
 	if (!l2cap_pi(sk)->psm) {
 		bdaddr_t *src = &bt_sk(sk)->src;
 		u16 psm;
@@ -1257,7 +1287,7 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __us
 		opts.imtu     = l2cap_pi(sk)->imtu;
 		opts.omtu     = l2cap_pi(sk)->omtu;
 		opts.flush_to = l2cap_pi(sk)->flush_to;
-		opts.mode     = L2CAP_MODE_BASIC;
+		opts.mode     = l2cap_pi(sk)->mode;
 
 		len = min_t(unsigned int, sizeof(opts), optlen);
 		if (copy_from_user((char *) &opts, optval, len)) {
@@ -1265,8 +1295,9 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __us
 			break;
 		}
 
-		l2cap_pi(sk)->imtu  = opts.imtu;
-		l2cap_pi(sk)->omtu  = opts.omtu;
+		l2cap_pi(sk)->imtu = opts.imtu;
+		l2cap_pi(sk)->omtu = opts.omtu;
+		l2cap_pi(sk)->mode = opts.mode;
 		break;
 
 	case L2CAP_LM:
@@ -1379,7 +1410,7 @@ static int l2cap_sock_getsockopt_old(struct socket *sock, int optname, char __us
 		opts.imtu     = l2cap_pi(sk)->imtu;
 		opts.omtu     = l2cap_pi(sk)->omtu;
 		opts.flush_to = l2cap_pi(sk)->flush_to;
-		opts.mode     = L2CAP_MODE_BASIC;
+		opts.mode     = l2cap_pi(sk)->mode;
 
 		len = min_t(unsigned int, len, sizeof(opts));
 		if (copy_to_user(optval, (char *) &opts, len))
@@ -1712,12 +1743,29 @@ static int l2cap_build_conf_req(struct sock *sk, void *data)
 {
 	struct l2cap_pinfo *pi = l2cap_pi(sk);
 	struct l2cap_conf_req *req = data;
+	struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_BASIC };
 	void *ptr = req->data;
 
 	BT_DBG("sk %p", sk);
 
-	if (pi->imtu != L2CAP_DEFAULT_MTU)
-		l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->imtu);
+	switch (pi->mode) {
+	case L2CAP_MODE_BASIC:
+		if (pi->imtu != L2CAP_DEFAULT_MTU)
+			l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->imtu);
+		break;
+
+	case L2CAP_MODE_ERTM:
+		rfc.mode            = L2CAP_MODE_ERTM;
+		rfc.txwin_size      = L2CAP_DEFAULT_RX_WINDOW;
+		rfc.max_transmit    = L2CAP_DEFAULT_MAX_RECEIVE;
+		rfc.retrans_timeout = cpu_to_le16(L2CAP_DEFAULT_RETRANS_TO);
+		rfc.monitor_timeout = cpu_to_le16(L2CAP_DEFAULT_MONITOR_TO);
+		rfc.max_pdu_size    = cpu_to_le16(L2CAP_DEFAULT_MAX_RX_APDU);
+
+		l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
+					sizeof(rfc), (unsigned long) &rfc);
+		break;
+	}
 
 	/* FIXME: Need actual value of the flush timeout */
 	//if (flush_to != L2CAP_DEFAULT_FLUSH_TO)
@@ -1797,7 +1845,7 @@ static int l2cap_parse_conf_req(struct sock *sk, void *data)
 			rfc.mode = L2CAP_MODE_BASIC;
 
 			l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
-						sizeof(rfc), (unsigned long) &rfc);
+					sizeof(rfc), (unsigned long) &rfc);
 		}
 	}
 
@@ -2205,10 +2253,13 @@ static inline int l2cap_information_req(struct l2cap_conn *conn, struct l2cap_cm
 
 	if (type == L2CAP_IT_FEAT_MASK) {
 		u8 buf[8];
+		u32 feat_mask = l2cap_feat_mask;
 		struct l2cap_info_rsp *rsp = (struct l2cap_info_rsp *) buf;
 		rsp->type   = cpu_to_le16(L2CAP_IT_FEAT_MASK);
 		rsp->result = cpu_to_le16(L2CAP_IR_SUCCESS);
-		put_unaligned(cpu_to_le32(l2cap_feat_mask), (__le32 *) rsp->data);
+		if (enable_ertm)
+			feat_mask |= L2CAP_FEAT_ERTM;
+		put_unaligned(cpu_to_le32(feat_mask), (__le32 *) rsp->data);
 		l2cap_send_cmd(conn, cmd->ident,
 					L2CAP_INFO_RSP, sizeof(buf), buf);
 	} else if (type == L2CAP_IT_FIXED_CHAN) {
@@ -2828,6 +2879,9 @@ EXPORT_SYMBOL(l2cap_load);
 module_init(l2cap_init);
 module_exit(l2cap_exit);
 
+module_param(enable_ertm, bool, 0644);
+MODULE_PARM_DESC(enable_ertm, "Enable enhanced retransmission mode");
+
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth L2CAP ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 51ae0c3e470a..13c27f17192c 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -359,20 +359,9 @@ static void sco_sock_kill(struct sock *sk)
 	sock_put(sk);
 }
 
-/* Close socket.
- * Must be called on unlocked socket.
- */
-static void sco_sock_close(struct sock *sk)
+static void __sco_sock_close(struct sock *sk)
 {
-	struct sco_conn *conn;
-
-	sco_sock_clear_timer(sk);
-
-	lock_sock(sk);
-
-	conn = sco_pi(sk)->conn;
-
-	BT_DBG("sk %p state %d conn %p socket %p", sk, sk->sk_state, conn, sk->sk_socket);
+	BT_DBG("sk %p state %d socket %p", sk, sk->sk_state, sk->sk_socket);
 
 	switch (sk->sk_state) {
 	case BT_LISTEN:
@@ -390,9 +379,15 @@ static void sco_sock_close(struct sock *sk)
 		sock_set_flag(sk, SOCK_ZAPPED);
 		break;
 	}
+}
 
+/* Must be called on unlocked socket. */
+static void sco_sock_close(struct sock *sk)
+{
+	sco_sock_clear_timer(sk);
+	lock_sock(sk);
+	__sco_sock_close(sk);
 	release_sock(sk);
-
 	sco_sock_kill(sk);
 }
 
@@ -748,6 +743,30 @@ static int sco_sock_getsockopt(struct socket *sock, int level, int optname, char
 	return err;
 }
 
+static int sco_sock_shutdown(struct socket *sock, int how)
+{
+	struct sock *sk = sock->sk;
+	int err = 0;
+
+	BT_DBG("sock %p, sk %p", sock, sk);
+
+	if (!sk)
+		return 0;
+
+	lock_sock(sk);
+	if (!sk->sk_shutdown) {
+		sk->sk_shutdown = SHUTDOWN_MASK;
+		sco_sock_clear_timer(sk);
+		__sco_sock_close(sk);
+
+		if (sock_flag(sk, SOCK_LINGER) && sk->sk_lingertime)
+			err = bt_sock_wait_state(sk, BT_CLOSED,
+							sk->sk_lingertime);
+	}
+	release_sock(sk);
+	return err;
+}
+
 static int sco_sock_release(struct socket *sock)
 {
 	struct sock *sk = sock->sk;
@@ -969,7 +988,7 @@ static const struct proto_ops sco_sock_ops = {
 	.ioctl		= bt_sock_ioctl,
 	.mmap		= sock_no_mmap,
 	.socketpair	= sock_no_socketpair,
-	.shutdown	= sock_no_shutdown,
+	.shutdown	= sco_sock_shutdown,
 	.setsockopt	= sco_sock_setsockopt,
 	.getsockopt	= sco_sock_getsockopt
 };