Merge commit 'sh/master'

11 files changed, 208 insertions, 45 deletions

diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 8ece0b5bd028..39224b57c6ef 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -61,10 +61,6 @@ config EARLY_PRINTK
 	  select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using
 	  the kernel command line option to toggle back and forth.
 
-config DEBUG_BOOTMEM
-	depends on DEBUG_KERNEL
-	bool "Debug BOOTMEM initialization"
-
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL && SUPERH32
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 9c3a33210d61..180455642a43 100644
--- a/arch/sh/boards/mach-se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -50,7 +50,7 @@ unsigned char se7206_inb_p(unsigned long port)
 
 unsigned short se7206_inw(unsigned long port)
 {
-	return *port2adr(port);;
+	return *port2adr(port);
 }
 
 void se7206_outb(unsigned char value, unsigned long port)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 9cd04bd558b8..21d18005fb4a 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -23,6 +23,8 @@
 #include <media/sh_mobile_ceu.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
+#include <asm/sh_eth.h>
+#include <asm/clock.h>
 #include <asm/sh_keysc.h>
 #include <cpu/sh7724.h>
 #include <mach-se/mach/se7724.h>
@@ -272,6 +274,34 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* SH Eth */
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 91,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8187 */
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
 static struct platform_device *ms7724se_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_eth_device,
@@ -280,8 +310,57 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&ceu0_device,
 	&ceu1_device,
 	&keysc_device,
+	&sh_eth_device,
 };
 
+#define EEPROM_OP   0xBA206000
+#define EEPROM_ADR  0xBA206004
+#define EEPROM_DATA 0xBA20600C
+#define EEPROM_STAT 0xBA206010
+#define EEPROM_STRT 0xBA206014
+static int __init sh_eth_is_eeprom_ready(void)
+{
+	int t = 10000;
+
+	while (t--) {
+		if (!ctrl_inw(EEPROM_STAT))
+			return 1;
+		cpu_relax();
+	}
+
+	printk(KERN_ERR "ms7724se can not access to eeprom\n");
+	return 0;
+}
+
+static void __init sh_eth_init(void)
+{
+	int i;
+	u16 mac[3];
+
+	/* check EEPROM status */
+	if (!sh_eth_is_eeprom_ready())
+		return;
+
+	/* read MAC addr from EEPROM */
+	for (i = 0 ; i < 3 ; i++) {
+		ctrl_outw(0x0, EEPROM_OP); /* read */
+		ctrl_outw(i*2, EEPROM_ADR);
+		ctrl_outw(0x1, EEPROM_STRT);
+		if (!sh_eth_is_eeprom_ready())
+			return;
+
+		mac[i] = ctrl_inw(EEPROM_DATA);
+		mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+	}
+
+	/* reset sh-eth */
+	ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
+
+	/* set MAC addr */
+	ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
+	ctrl_outl((mac[2]), SH_ETH_MALR);
+}
+
 #define SW4140    0xBA201000
 #define FPGA_OUT  0xBA200400
 #define PORT_HIZA 0xA4050158
@@ -302,7 +381,8 @@ static int __init devices_setup(void)
 	ctrl_outw(ctrl_inw(FPGA_OUT) &
 		  ~((1 << 1)  | /* LAN */
 		    (1 << 6)  | /* VIDEO DAC */
-		    (1 << 12)), /* USB0 */
+		    (1 << 12) | /* USB0 */
+		    (1 << 14)), /* RMII */
 		  FPGA_OUT);
 
 	/* enable IRQ 0,1,2 */
@@ -404,6 +484,28 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_KEYOUT1,     NULL);
 	gpio_request(GPIO_FN_KEYOUT0,     NULL);
 
+	/*
+	 * enable SH-Eth
+	 *
+	 * please remove J33 pin from your board !!
+	 *
+	 * ms7724 board should not use GPIO_FN_LNKSTA pin
+	 * So, This time PTX5 is set to input pin
+	 */
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_PTX5, NULL);
+	gpio_direction_input(GPIO_PTX5);
+	sh_eth_init();
+
 	if (sw & SW41_B) {
 		/* SVGA */
 		lcdc_info.ch[0].lcd_cfg.xres         = 800;
@@ -437,7 +539,7 @@ static int __init devices_setup(void)
 	}
 
 	return platform_add_devices(ms7724se_devices,
-				ARRAY_SIZE(ms7724se_devices));
+				    ARRAY_SIZE(ms7724se_devices));
 }
 device_initcall(devices_setup);
 
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index 3840270283e4..3ee783a0a075 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.30
-# Thu Jun 18 16:09:05 2009
+# Mon Jun 29 16:28:43 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -88,10 +91,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
 
 #
 # Performance Counters
 #
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
@@ -107,6 +112,10 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -119,7 +128,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -584,7 +593,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -624,7 +632,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
-# CONFIG_SH_ETH is not set
+CONFIG_SH_ETH=y
 CONFIG_SMC91X=y
 # CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
@@ -801,6 +809,11 @@ CONFIG_SPI_BITBANG=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -851,6 +864,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -1196,6 +1211,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1260,6 +1276,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 CONFIG_FILE_LOCKING=y
diff --git a/arch/sh/include/asm/perf_counter.h b/arch/sh/include/asm/perf_counter.h
index a8153c2aa6fa..61c2b40c802c 100644
--- a/arch/sh/include/asm/perf_counter.h
+++ b/arch/sh/include/asm/perf_counter.h
@@ -2,6 +2,6 @@
 #define __ASM_SH_PERF_COUNTER_H
 
 /* SH only supports software counters through this interface. */
-#define set_perf_counter_pending()	do { } while (0)
+static inline void set_perf_counter_pending(void) {}
 
 #endif /* __ASM_SH_PERF_COUNTER_H */
diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h
index 74164b60d0db..29514a39d0f5 100644
--- a/arch/sh/include/mach-se/mach/se7724.h
+++ b/arch/sh/include/mach-se/mach/se7724.h
@@ -20,6 +20,11 @@
  */
 #include <asm/addrspace.h>
 
+/* SH Eth */
+#define SH_ETH_ADDR	(0xA4600000)
+#define SH_ETH_MAHR	(SH_ETH_ADDR + 0x1C0)
+#define SH_ETH_MALR	(SH_ETH_ADDR + 0x1C8)
+
 #define PA_LED		(0xba203000)	/* 8bit LED */
 #define IRQ_MODE	(0xba200010)
 #define IRQ0_SR		(0xba200014)
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index cc8ddbdf3d7a..71925946f1e1 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -15,12 +15,28 @@
 #include <linux/mm.h>
 #include <linux/hardirq.h>
 #include <linux/kprobes.h>
-#include <linux/marker.h>
+#include <linux/perf_counter.h>
 #include <asm/io_trapped.h>
 #include <asm/system.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
 
+static inline int notify_page_fault(struct pt_regs *regs, int trap)
+{
+	int ret = 0;
+
+#ifdef CONFIG_KPROBES
+	if (!user_mode(regs)) {
+		preempt_disable();
+		if (kprobe_running() && kprobe_fault_handler(regs, trap))
+			ret = 1;
+		preempt_enable();
+	}
+#endif
+
+	return ret;
+}
+
 /*
  * This routine handles page faults.  It determines the address,
  * and the problem, and then passes it off to one of the appropriate
@@ -87,13 +103,16 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 		return;
 	}
 
+	mm = tsk->mm;
+
+	if (unlikely(notify_page_fault(regs, lookup_exception_vector())))
+		return;
+
 	/* Only enable interrupts if they were on before the fault */
-	if ((regs->sr & SR_IMASK) != SR_IMASK) {
-		trace_hardirqs_on();
+	if ((regs->sr & SR_IMASK) != SR_IMASK)
 		local_irq_enable();
-	}
 
-	mm = tsk->mm;
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 
 	/*
 	 * If we're in an interrupt or have no user
@@ -141,10 +160,15 @@ survive:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
 
 	up_read(&mm->mmap_sem);
 	return;
@@ -245,22 +269,6 @@ do_sigbus:
 		goto no_context;
 }
 
-static inline int notify_page_fault(struct pt_regs *regs, int trap)
-{
-	int ret = 0;
-
-#ifdef CONFIG_KPROBES
-	if (!user_mode(regs)) {
-		preempt_disable();
-		if (kprobe_running() && kprobe_fault_handler(regs, trap))
-			ret = 1;
-		preempt_enable();
-	}
-#endif
-
-	return ret;
-}
-
 /*
  * Called with interrupts disabled.
  */
@@ -273,12 +281,7 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
 	pmd_t *pmd;
 	pte_t *pte;
 	pte_t entry;
-	int ret = 0;
-
-	if (notify_page_fault(regs, lookup_exception_vector()))
-		goto out;
-
-	ret = 1;
+	int ret = 1;
 
 	/*
 	 * We don't take page faults for P1, P2, and parts of P4, these
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index fcbb6e135cef..3ce40ea34824 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2000, 2001  Paolo Alberelli
  * Copyright (C) 2003  Richard Curnow (/proc/tlb, bug fixes)
- * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2003 - 2009 Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -20,6 +20,7 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
+#include <linux/perf_counter.h>
 #include <linux/interrupt.h>
 #include <asm/system.h>
 #include <asm/io.h>
@@ -115,6 +116,8 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 	/* Not an IO address, so reenable interrupts */
 	local_irq_enable();
 
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
+
 	/*
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
@@ -195,10 +198,16 @@ survive:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
 
 	/* If we get here, the page fault has been handled.  Do the TLB refill
 	   now from the newly-setup PTE, to avoid having to fault again right
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 9ffb05f4095d..93c2322feab7 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -161,7 +161,7 @@ static void sh_tmu_set_next(struct sh_tmu_priv *p, unsigned long delta,
 	if (periodic)
 		sh_tmu_write(p, TCOR, delta);
 	else
-		sh_tmu_write(p, TCOR, 0);
+		sh_tmu_write(p, TCOR, 0xffffffff);
 
 	sh_tmu_write(p, TCNT, delta);
 
diff --git a/mm/nommu.c b/mm/nommu.c
index bf0cc762a7d2..53cab10fece4 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -238,6 +238,27 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 }
 EXPORT_SYMBOL(get_user_pages);
 
+/**
+ * follow_pfn - look up PFN at a user virtual address
+ * @vma: memory mapping
+ * @address: user virtual address
+ * @pfn: location to store found PFN
+ *
+ * Only IO mappings and raw PFN mappings are allowed.
+ *
+ * Returns zero and the pfn at @pfn on success, -ve otherwise.
+ */
+int follow_pfn(struct vm_area_struct *vma, unsigned long address,
+	unsigned long *pfn)
+{
+	if (!(vma->vm_flags & (VM_IO | VM_PFNMAP)))
+		return -EINVAL;
+
+	*pfn = address >> PAGE_SHIFT;
+	return 0;
+}
+EXPORT_SYMBOL(follow_pfn);
+
 DEFINE_RWLOCK(vmlist_lock);
 struct vm_struct *vmlist;
 
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index ceb68aa51f7f..f735b6924a2f 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -19,6 +19,16 @@
 #define cpu_relax()	asm volatile("" ::: "memory");
 #endif
 
+#ifdef __sh__
+#include "../../arch/sh/include/asm/unistd.h"
+#if defined(__SH4A__) || defined(__SH5__)
+# define rmb()		asm volatile("synco" ::: "memory")
+#else
+# define rmb()		asm volatile("" ::: "memory")
+#endif
+#define cpu_relax()	asm volatile("" ::: "memory")
+#endif
+
 #include <time.h>
 #include <unistd.h>
 #include <sys/types.h>