Merge remote branch 'mmc/mmc-next'

25 files changed, 626 insertions, 73 deletions

diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index f7a12586a1f5..fe627aba6da7 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -770,7 +770,7 @@ static struct resource dove_sdio0_resources[] = {
 };
 
 static struct platform_device dove_sdio0 = {
-	.name		= "sdhci-mv",
+	.name		= "sdhci-dove",
 	.id		= 0,
 	.dev		= {
 		.dma_mask		= &sdio_dmamask,
@@ -798,7 +798,7 @@ static struct resource dove_sdio1_resources[] = {
 };
 
 static struct platform_device dove_sdio1 = {
-	.name		= "sdhci-mv",
+	.name		= "sdhci-dove",
 	.id		= 1,
 	.dev		= {
 		.dma_mask		= &sdio_dmamask,
diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig
index bb22ffd76ef8..ef103871517f 100644
--- a/drivers/mmc/core/Kconfig
+++ b/drivers/mmc/core/Kconfig
@@ -16,3 +16,14 @@ config MMC_UNSAFE_RESUME
 
 	  This option sets a default which can be overridden by the
 	  module parameter "removable=0" or "removable=1".
+
+config MMC_CLKGATE
+	bool "MMC host clock gating (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  This will attempt to aggressively gate the clock to the MMC card.
+	  This is done to save power due to gating off the logic and bus
+	  noise when the MMC card is not in use. Your host driver has to
+	  support handling this in order for it to be of any use.
+
+	  If unsure, say N.
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 8f86d702e46e..6286898ffea0 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -130,6 +130,8 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
 
 		if (mrq->done)
 			mrq->done(mrq);
+
+		mmc_host_clk_gate(host);
 	}
 }
 
@@ -190,6 +192,7 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 			mrq->stop->mrq = mrq;
 		}
 	}
+	mmc_host_clk_ungate(host);
 	host->ops->request(host, mrq);
 }
 
@@ -296,7 +299,7 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card)
 
 		timeout_us = data->timeout_ns / 1000;
 		timeout_us += data->timeout_clks * 1000 /
-			(card->host->ios.clock / 1000);
+			(mmc_host_clk_rate(card->host) / 1000);
 
 		if (data->flags & MMC_DATA_WRITE)
 			/*
@@ -614,6 +617,8 @@ static inline void mmc_set_ios(struct mmc_host *host)
 		 ios->power_mode, ios->chip_select, ios->vdd,
 		 ios->bus_width, ios->timing);
 
+	if (ios->clock > 0)
+		mmc_set_ungated(host);
 	host->ops->set_ios(host, ios);
 }
 
@@ -641,6 +646,61 @@ void mmc_set_clock(struct mmc_host *host, unsigned int hz)
 	mmc_set_ios(host);
 }
 
+#ifdef CONFIG_MMC_CLKGATE
+/*
+ * This gates the clock by setting it to 0 Hz.
+ */
+void mmc_gate_clock(struct mmc_host *host)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->clk_lock, flags);
+	host->clk_old = host->ios.clock;
+	host->ios.clock = 0;
+	host->clk_gated = true;
+	spin_unlock_irqrestore(&host->clk_lock, flags);
+	mmc_set_ios(host);
+}
+
+/*
+ * This restores the clock from gating by using the cached
+ * clock value.
+ */
+void mmc_ungate_clock(struct mmc_host *host)
+{
+	/*
+	 * We should previously have gated the clock, so the clock shall
+	 * be 0 here! The clock may however be 0 during initialization,
+	 * when some request operations are performed before setting
+	 * the frequency. When ungate is requested in that situation
+	 * we just ignore the call.
+	 */
+	if (host->clk_old) {
+		BUG_ON(host->ios.clock);
+		/* This call will also set host->clk_gated to false */
+		mmc_set_clock(host, host->clk_old);
+	}
+}
+
+void mmc_set_ungated(struct mmc_host *host)
+{
+	unsigned long flags;
+
+	/*
+	 * We've been given a new frequency while the clock is gated,
+	 * so make sure we regard this as ungating it.
+	 */
+	spin_lock_irqsave(&host->clk_lock, flags);
+	host->clk_gated = false;
+	spin_unlock_irqrestore(&host->clk_lock, flags);
+}
+
+#else
+void mmc_set_ungated(struct mmc_host *host)
+{
+}
+#endif
+
 /*
  * Change the bus mode (open drain/push-pull) of a host.
  */
@@ -1559,7 +1619,7 @@ void mmc_stop_host(struct mmc_host *host)
 
 	if (host->caps & MMC_CAP_DISABLE)
 		cancel_delayed_work(&host->disable);
-	cancel_delayed_work(&host->detect);
+	cancel_delayed_work_sync(&host->detect);
 	mmc_flush_scheduled_work();
 
 	/* clear pm flags now and let card drivers set them as needed */
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 77240cd11bcf..026c975b99a9 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -33,6 +33,9 @@ void mmc_init_erase(struct mmc_card *card);
 
 void mmc_set_chip_select(struct mmc_host *host, int mode);
 void mmc_set_clock(struct mmc_host *host, unsigned int hz);
+void mmc_gate_clock(struct mmc_host *host);
+void mmc_ungate_clock(struct mmc_host *host);
+void mmc_set_ungated(struct mmc_host *host);
 void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode);
 void mmc_set_bus_width(struct mmc_host *host, unsigned int width);
 void mmc_set_bus_width_ddr(struct mmc_host *host, unsigned int width,
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
index eed1405fd742..998797ed67a6 100644
--- a/drivers/mmc/core/debugfs.c
+++ b/drivers/mmc/core/debugfs.c
@@ -183,6 +183,11 @@ void mmc_add_host_debugfs(struct mmc_host *host)
 			&mmc_clock_fops))
 		goto err_node;
 
+#ifdef CONFIG_MMC_CLKGATE
+	if (!debugfs_create_u32("clk_delay", (S_IRUSR | S_IWUSR),
+				root, &host->clk_delay))
+		goto err_node;
+#endif
 	return;
 
 err_node:
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 10b8af27e03a..92e33703e437 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2003 Russell King, All Rights Reserved.
  *  Copyright (C) 2007-2008 Pierre Ossman
+ *  Copyright (C) 2010 Linus Walleij
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -20,6 +21,7 @@
 #include <linux/suspend.h>
 
 #include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
 
 #include "core.h"
 #include "host.h"
@@ -50,6 +52,204 @@ void mmc_unregister_host_class(void)
 static DEFINE_IDR(mmc_host_idr);
 static DEFINE_SPINLOCK(mmc_host_lock);
 
+#ifdef CONFIG_MMC_CLKGATE
+
+/*
+ * Enabling clock gating will make the core call out to the host
+ * once up and once down when it performs a request or card operation
+ * intermingled in any fashion. The driver will see this through
+ * set_ios() operations with ios.clock field set to 0 to gate (disable)
+ * the block clock, and to the old frequency to enable it again.
+ */
+static void mmc_host_clk_gate_delayed(struct mmc_host *host)
+{
+	unsigned long tick_ns;
+	unsigned long freq = host->ios.clock;
+	unsigned long flags;
+
+	if (!freq) {
+		pr_debug("%s: frequency set to 0 in disable function, "
+			 "this means the clock is already disabled.\n",
+			 mmc_hostname(host));
+		return;
+	}
+	/*
+	 * New requests may have appeared while we were scheduling,
+	 * then there is no reason to delay the check before
+	 * clk_disable().
+	 */
+	spin_lock_irqsave(&host->clk_lock, flags);
+
+	/*
+	 * Delay n bus cycles (at least 8 from MMC spec) before attempting
+	 * to disable the MCI block clock. The reference count may have
+	 * gone up again after this delay due to rescheduling!
+	 */
+	if (!host->clk_requests) {
+		spin_unlock_irqrestore(&host->clk_lock, flags);
+		tick_ns = DIV_ROUND_UP(1000000000, freq);
+		ndelay(host->clk_delay * tick_ns);
+	} else {
+		/* New users appeared while waiting for this work */
+		spin_unlock_irqrestore(&host->clk_lock, flags);
+		return;
+	}
+	mutex_lock(&host->clk_gate_mutex);
+	spin_lock_irqsave(&host->clk_lock, flags);
+	if (!host->clk_requests) {
+		spin_unlock_irqrestore(&host->clk_lock, flags);
+		/* This will set host->ios.clock to 0 */
+		mmc_gate_clock(host);
+		spin_lock_irqsave(&host->clk_lock, flags);
+		pr_debug("%s: gated MCI clock\n", mmc_hostname(host));
+	}
+	spin_unlock_irqrestore(&host->clk_lock, flags);
+	mutex_unlock(&host->clk_gate_mutex);
+}
+
+/*
+ * Internal work. Work to disable the clock at some later point.
+ */
+static void mmc_host_clk_gate_work(struct work_struct *work)
+{
+	struct mmc_host *host = container_of(work, struct mmc_host,
+					      clk_gate_work);
+
+	mmc_host_clk_gate_delayed(host);
+}
+
+/**
+ *	mmc_host_clk_ungate - ungate hardware MCI clocks
+ *	@host: host to ungate.
+ *
+ *	Makes sure the host ios.clock is restored to a non-zero value
+ *	past this call.	Increase clock reference count and ungate clock
+ *	if we're the first user.
+ */
+void mmc_host_clk_ungate(struct mmc_host *host)
+{
+	unsigned long flags;
+
+	mutex_lock(&host->clk_gate_mutex);
+	spin_lock_irqsave(&host->clk_lock, flags);
+	if (host->clk_gated) {
+		spin_unlock_irqrestore(&host->clk_lock, flags);
+		mmc_ungate_clock(host);
+		spin_lock_irqsave(&host->clk_lock, flags);
+		pr_debug("%s: ungated MCI clock\n", mmc_hostname(host));
+	}
+	host->clk_requests++;
+	spin_unlock_irqrestore(&host->clk_lock, flags);
+	mutex_unlock(&host->clk_gate_mutex);
+}
+
+/**
+ *	mmc_host_may_gate_card - check if this card may be gated
+ *	@card: card to check.
+ */
+static bool mmc_host_may_gate_card(struct mmc_card *card)
+{
+	/* If there is no card we may gate it */
+	if (!card)
+		return true;
+	/*
+	 * Don't gate SDIO cards! These need to be clocked at all times
+	 * since they may be independent systems generating interrupts
+	 * and other events. The clock requests counter from the core will
+	 * go down to zero since the core does not need it, but we will not
+	 * gate the clock, because there is somebody out there that may still
+	 * be using it.
+	 */
+	if (mmc_card_sdio(card))
+		return false;
+
+	return true;
+}
+
+/**
+ *	mmc_host_clk_gate - gate off hardware MCI clocks
+ *	@host: host to gate.
+ *
+ *	Calls the host driver with ios.clock set to zero as often as possible
+ *	in order to gate off hardware MCI clocks. Decrease clock reference
+ *	count and schedule disabling of clock.
+ */
+void mmc_host_clk_gate(struct mmc_host *host)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->clk_lock, flags);
+	host->clk_requests--;
+	if (mmc_host_may_gate_card(host->card) &&
+	    !host->clk_requests)
+		schedule_work(&host->clk_gate_work);
+	spin_unlock_irqrestore(&host->clk_lock, flags);
+}
+
+/**
+ *	mmc_host_clk_rate - get current clock frequency setting
+ *	@host: host to get the clock frequency for.
+ *
+ *	Returns current clock frequency regardless of gating.
+ */
+unsigned int mmc_host_clk_rate(struct mmc_host *host)
+{
+	unsigned long freq;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->clk_lock, flags);
+	if (host->clk_gated)
+		freq = host->clk_old;
+	else
+		freq = host->ios.clock;
+	spin_unlock_irqrestore(&host->clk_lock, flags);
+	return freq;
+}
+
+/**
+ *	mmc_host_clk_init - set up clock gating code
+ *	@host: host with potential clock to control
+ */
+static inline void mmc_host_clk_init(struct mmc_host *host)
+{
+	host->clk_requests = 0;
+	/* Hold MCI clock for 8 cycles by default */
+	host->clk_delay = 8;
+	host->clk_gated = false;
+	INIT_WORK(&host->clk_gate_work, mmc_host_clk_gate_work);
+	spin_lock_init(&host->clk_lock);
+	mutex_init(&host->clk_gate_mutex);
+}
+
+/**
+ *	mmc_host_clk_exit - shut down clock gating code
+ *	@host: host with potential clock to control
+ */
+static inline void mmc_host_clk_exit(struct mmc_host *host)
+{
+	/*
+	 * Wait for any outstanding gate and then make sure we're
+	 * ungated before exiting.
+	 */
+	if (cancel_work_sync(&host->clk_gate_work))
+		mmc_host_clk_gate_delayed(host);
+	if (host->clk_gated)
+		mmc_host_clk_ungate(host);
+	BUG_ON(host->clk_requests > 0);
+}
+
+#else
+
+static inline void mmc_host_clk_init(struct mmc_host *host)
+{
+}
+
+static inline void mmc_host_clk_exit(struct mmc_host *host)
+{
+}
+
+#endif
+
 /**
  *	mmc_alloc_host - initialise the per-host structure.
  *	@extra: sizeof private data structure
@@ -82,6 +282,8 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
 	host->class_dev.class = &mmc_host_class;
 	device_initialize(&host->class_dev);
 
+	mmc_host_clk_init(host);
+
 	spin_lock_init(&host->lock);
 	init_waitqueue_head(&host->wq);
 	INIT_DELAYED_WORK(&host->detect, mmc_rescan);
@@ -163,6 +365,8 @@ void mmc_remove_host(struct mmc_host *host)
 	device_del(&host->class_dev);
 
 	led_trigger_unregister_simple(host->led);
+
+	mmc_host_clk_exit(host);
 }
 
 EXPORT_SYMBOL(mmc_remove_host);
@@ -183,4 +387,3 @@ void mmc_free_host(struct mmc_host *host)
 }
 
 EXPORT_SYMBOL(mmc_free_host);
-
diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h
index 8c87e1109a34..de199f911928 100644
--- a/drivers/mmc/core/host.h
+++ b/drivers/mmc/core/host.h
@@ -10,10 +10,31 @@
  */
 #ifndef _MMC_CORE_HOST_H
 #define _MMC_CORE_HOST_H
+#include <linux/mmc/host.h>
 
 int mmc_register_host_class(void);
 void mmc_unregister_host_class(void);
 
+#ifdef CONFIG_MMC_CLKGATE
+void mmc_host_clk_ungate(struct mmc_host *host);
+void mmc_host_clk_gate(struct mmc_host *host);
+unsigned int mmc_host_clk_rate(struct mmc_host *host);
+
+#else
+static inline void mmc_host_clk_ungate(struct mmc_host *host)
+{
+}
+
+static inline void mmc_host_clk_gate(struct mmc_host *host)
+{
+}
+
+static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
+{
+	return host->ios.clock;
+}
+#endif
+
 void mmc_host_deeper_disable(struct work_struct *work);
 
 #endif
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 995261f7fd70..77f93c3b8808 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -375,7 +375,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	struct mmc_card *oldcard)
 {
 	struct mmc_card *card;
-	int err, ddr = MMC_SDR_MODE;
+	int err, ddr = 0;
 	u32 cid[4];
 	unsigned int max_dtr;
 
@@ -562,7 +562,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 			       1 << bus_width, ddr);
 			err = 0;
 		} else {
-			mmc_card_set_ddr_mode(card);
+			if (ddr)
+				mmc_card_set_ddr_mode(card);
+			else
+				ddr = MMC_SDR_MODE;
+
 			mmc_set_bus_width_ddr(card->host, bus_width, ddr);
 		}
 	}
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index c3ad1058cd31..efef5f94ac42 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -547,9 +547,11 @@ static void mmc_sdio_detect(struct mmc_host *host)
 	BUG_ON(!host->card);
 
 	/* Make sure card is powered before detecting it */
-	err = pm_runtime_get_sync(&host->card->dev);
-	if (err < 0)
-		goto out;
+	if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+		err = pm_runtime_get_sync(&host->card->dev);
+		if (err < 0)
+			goto out;
+	}
 
 	mmc_claim_host(host);
 
@@ -560,6 +562,20 @@ static void mmc_sdio_detect(struct mmc_host *host)
 
 	mmc_release_host(host);
 
+	/*
+	 * Tell PM core it's OK to power off the card now.
+	 *
+	 * The _sync variant is used in order to ensure that the card
+	 * is left powered off in case an error occurred, and the card
+	 * is going to be removed.
+	 *
+	 * Since there is no specific reason to believe a new user
+	 * is about to show up at this point, the _sync variant is
+	 * desirable anyway.
+	 */
+	if (host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_sync(&host->card->dev);
+
 out:
 	if (err) {
 		mmc_sdio_remove(host);
@@ -568,9 +584,6 @@ out:
 		mmc_detach_bus(host);
 		mmc_release_host(host);
 	}
-
-	/* Tell PM core that we're done */
-	pm_runtime_put(&host->card->dev);
 }
 
 /*
@@ -718,16 +731,21 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
 	card = host->card;
 
 	/*
-	 * Let runtime PM core know our card is active
+	 * Enable runtime PM only if supported by host+card+board
 	 */
-	err = pm_runtime_set_active(&card->dev);
-	if (err)
-		goto remove;
+	if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+		/*
+		 * Let runtime PM core know our card is active
+		 */
+		err = pm_runtime_set_active(&card->dev);
+		if (err)
+			goto remove;
 
-	/*
-	 * Enable runtime PM for this card
-	 */
-	pm_runtime_enable(&card->dev);
+		/*
+		 * Enable runtime PM for this card
+		 */
+		pm_runtime_enable(&card->dev);
+	}
 
 	/*
 	 * The number of functions on the card is encoded inside
@@ -745,9 +763,10 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
 			goto remove;
 
 		/*
-		 * Enable Runtime PM for this func
+		 * Enable Runtime PM for this func (if supported)
 		 */
-		pm_runtime_enable(&card->sdio_func[i]->dev);
+		if (host->caps & MMC_CAP_POWER_OFF_CARD)
+			pm_runtime_enable(&card->sdio_func[i]->dev);
 	}
 
 	mmc_release_host(host);
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 2716c7ab6bbf..203da443e339 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -17,6 +17,7 @@
 #include <linux/pm_runtime.h>
 
 #include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
 #include <linux/mmc/sdio_func.h>
 
 #include "sdio_cis.h"
@@ -132,9 +133,11 @@ static int sdio_bus_probe(struct device *dev)
 	 * it should call pm_runtime_put_noidle() in its probe routine and
 	 * pm_runtime_get_noresume() in its remove routine.
 	 */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		goto out;
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			goto out;
+	}
 
 	/* Set the default block size so the driver is sure it's something
 	 * sensible. */
@@ -151,7 +154,8 @@ static int sdio_bus_probe(struct device *dev)
 	return 0;
 
 disable_runtimepm:
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 out:
 	return ret;
 }
@@ -160,12 +164,14 @@ static int sdio_bus_remove(struct device *dev)
 {
 	struct sdio_driver *drv = to_sdio_driver(dev->driver);
 	struct sdio_func *func = dev_to_sdio_func(dev);
-	int ret;
+	int ret = 0;
 
 	/* Make sure card is powered before invoking ->remove() */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		goto out;
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			goto out;
+	}
 
 	drv->remove(func);
 
@@ -178,10 +184,12 @@ static int sdio_bus_remove(struct device *dev)
 	}
 
 	/* First, undo the increment made directly above */
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 
 	/* Then undo the runtime PM settings in sdio_bus_probe() */
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 
 out:
 	return ret;
@@ -191,6 +199,8 @@ out:
 
 static int sdio_bus_pm_prepare(struct device *dev)
 {
+	struct sdio_func *func = dev_to_sdio_func(dev);
+
 	/*
 	 * Resume an SDIO device which was suspended at run time at this
 	 * point, in order to allow standard SDIO suspend/resume paths
@@ -212,7 +222,8 @@ static int sdio_bus_pm_prepare(struct device *dev)
 	 * since there is little point in failing system suspend if a
 	 * device can't be resumed.
 	 */
-	pm_runtime_resume(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_resume(dev);
 
 	return 0;
 }
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index d618e8673996..f8fa9efca8ee 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -140,6 +140,17 @@ config MMC_SDHCI_ESDHC_IMX
 
 	  If unsure, say N.
 
+config MMC_SDHCI_DOVE
+	bool "SDHCI support on Marvell's Dove SoC"
+	depends on ARCH_DOVE
+	depends on MMC_SDHCI_PLTFM
+	select MMC_SDHCI_IO_ACCESSORS
+	help
+	  This selects the Secure Digital Host Controller Interface in
+	  Marvell's Dove SoC.
+
+	  If unsure, say N.
+
 config MMC_SDHCI_S3C
 	tristate "SDHCI support on Samsung S3C SoC"
 	depends on MMC_SDHCI && PLAT_SAMSUNG
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 7b645ff43b30..d91364d4bf39 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_MMC_SDHCI_PLTFM)			+= sdhci-platform.o
 sdhci-platform-y				:= sdhci-pltfm.o
 sdhci-platform-$(CONFIG_MMC_SDHCI_CNS3XXX)	+= sdhci-cns3xxx.o
 sdhci-platform-$(CONFIG_MMC_SDHCI_ESDHC_IMX)	+= sdhci-esdhc-imx.o
+sdhci-platform-$(CONFIG_MMC_SDHCI_DOVE)		+= sdhci-dove.o
 
 obj-$(CONFIG_MMC_SDHCI_OF)	+= sdhci-of.o
 sdhci-of-y				:= sdhci-of-core.o
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index bdd2cbb87cba..2b9f7c856700 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -31,6 +31,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
 
 #include <asm/dma.h>
 #include <asm/irq.h>
@@ -141,10 +142,49 @@ struct mxcmci_host {
 
 	struct work_struct	datawork;
 	spinlock_t		lock;
+
+	struct regulator	*vcc;
 };
 
 static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
 
+static inline void mxcmci_init_ocr(struct mxcmci_host *host)
+{
+	host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
+
+	if (IS_ERR(host->vcc)) {
+		host->vcc = NULL;
+	} else {
+		host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
+		if (host->pdata && host->pdata->ocr_avail)
+			dev_warn(mmc_dev(host->mmc),
+				"pdata->ocr_avail will not be used\n");
+	}
+
+	if (host->vcc == NULL) {
+		/* fall-back to platform data */
+		if (host->pdata && host->pdata->ocr_avail)
+			host->mmc->ocr_avail = host->pdata->ocr_avail;
+		else
+			host->mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	}
+}
+
+static inline void mxcmci_set_power(struct mxcmci_host *host,
+				    unsigned char power_mode,
+				    unsigned int vdd)
+{
+	if (host->vcc) {
+		if (power_mode == MMC_POWER_UP)
+			mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
+		else if (power_mode == MMC_POWER_OFF)
+			mmc_regulator_set_ocr(host->mmc, host->vcc, 0);
+	}
+
+	if (host->pdata && host->pdata->setpower)
+		host->pdata->setpower(mmc_dev(host->mmc), vdd);
+}
+
 static inline int mxcmci_use_dma(struct mxcmci_host *host)
 {
 	return host->do_dma;
@@ -680,9 +720,9 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4;
 
 	if (host->power_mode != ios->power_mode) {
-		if (host->pdata && host->pdata->setpower)
-			host->pdata->setpower(mmc_dev(mmc), ios->vdd);
+		mxcmci_set_power(host, ios->power_mode, ios->vdd);
 		host->power_mode = ios->power_mode;
+
 		if (ios->power_mode == MMC_POWER_ON)
 			host->cmdat |= CMD_DAT_CONT_INIT;
 	}
@@ -807,10 +847,7 @@ static int mxcmci_probe(struct platform_device *pdev)
 	host->pdata = pdev->dev.platform_data;
 	spin_lock_init(&host->lock);
 
-	if (host->pdata && host->pdata->ocr_avail)
-		mmc->ocr_avail = host->pdata->ocr_avail;
-	else
-		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	mxcmci_init_ocr(host);
 
 	if (host->pdata && host->pdata->dat3_card_detect)
 		host->default_irq_mask =
@@ -915,6 +952,9 @@ static int mxcmci_remove(struct platform_device *pdev)
 
 	mmc_remove_host(mmc);
 
+	if (host->vcc)
+		regulator_put(host->vcc);
+
 	if (host->pdata && host->pdata->exit)
 		host->pdata->exit(&pdev->dev, mmc);
 
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 82a1079bbdc7..5d46021cbb57 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1002,7 +1002,7 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
 	 * Monitor a 0->1 transition first
 	 */
 	if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
-		while ((!(OMAP_HSMMC_READ(host, SYSCTL) & bit))
+		while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
 					&& (i++ < limit))
 			cpu_relax();
 	}
diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c
new file mode 100644
index 000000000000..2aeef4ffed8c
--- /dev/null
+++ b/drivers/mmc/host/sdhci-dove.c
@@ -0,0 +1,70 @@
+/*
+ * sdhci-dove.c Support for SDHCI on Marvell's Dove SoC
+ *
+ * Author: Saeed Bishara <saeed@marvell.com>
+ *	   Mike Rapoport <mike@compulab.co.il>
+ * Based on sdhci-cns3xxx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+
+#include "sdhci.h"
+#include "sdhci-pltfm.h"
+
+static u16 sdhci_dove_readw(struct sdhci_host *host, int reg)
+{
+	u16 ret;
+
+	switch (reg) {
+	case SDHCI_HOST_VERSION:
+	case SDHCI_SLOT_INT_STATUS:
+		/* those registers don't exist */
+		return 0;
+	default:
+		ret = readw(host->ioaddr + reg);
+	}
+	return ret;
+}
+
+static u32 sdhci_dove_readl(struct sdhci_host *host, int reg)
+{
+	u32 ret;
+
+	switch (reg) {
+	case SDHCI_CAPABILITIES:
+		ret = readl(host->ioaddr + reg);
+		/* Mask the support for 3.0V */
+		ret &= ~SDHCI_CAN_VDD_300;
+		break;
+	default:
+		ret = readl(host->ioaddr + reg);
+	}
+	return ret;
+}
+
+static struct sdhci_ops sdhci_dove_ops = {
+	.read_w	= sdhci_dove_readw,
+	.read_l	= sdhci_dove_readl,
+};
+
+struct sdhci_pltfm_data sdhci_dove_pdata = {
+	.ops	= &sdhci_dove_ops,
+	.quirks	= SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+		  SDHCI_QUIRK_NO_BUSY_IRQ |
+		  SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
+		  SDHCI_QUIRK_FORCE_DMA,
+};
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 2e9cca19c90b..9b82910b9dbb 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdhci-pltfm.h>
+#include <mach/hardware.h>
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
@@ -112,6 +113,13 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd
 	clk_enable(clk);
 	pltfm_host->clk = clk;
 
+	if (cpu_is_mx35() || cpu_is_mx51())
+		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+	/* Fix errata ENGcm07207 which is present on i.MX25 and i.MX35 */
+	if (cpu_is_mx25() || cpu_is_mx35())
+		host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+
 	return 0;
 }
 
@@ -133,10 +141,8 @@ static struct sdhci_ops sdhci_esdhc_ops = {
 };
 
 struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
-	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_MULTIBLOCK
-			| SDHCI_QUIRK_BROKEN_ADMA,
+	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA,
 	/* ADMA has issues. Might be fixable */
-	/* NO_MULTIBLOCK might be MX35 only (Errata: ENGcm07207) */
 	.ops = &sdhci_esdhc_ops,
 	.init = esdhc_pltfm_init,
 	.exit = esdhc_pltfm_exit,
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 55746bac2f44..3d9c2460d437 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -149,11 +149,11 @@ static const struct sdhci_pci_fixes sdhci_cafe = {
  * ADMA operation is disabled for Moorestown platform due to
  * hardware bugs.
  */
-static int mrst_hc1_probe(struct sdhci_pci_chip *chip)
+static int mrst_hc_probe(struct sdhci_pci_chip *chip)
 {
 	/*
-	 * slots number is fixed here for MRST as SDIO3 is never used and has
-	 * hardware bugs.
+	 * slots number is fixed here for MRST as SDIO3/5 are never used and
+	 * have hardware bugs.
 	 */
 	chip->num_slots = 1;
 	return 0;
@@ -163,9 +163,9 @@ static const struct sdhci_pci_fixes sdhci_intel_mrst_hc0 = {
 	.quirks		= SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
 };
 
-static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1 = {
+static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = {
 	.quirks		= SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
-	.probe		= mrst_hc1_probe,
+	.probe		= mrst_hc_probe,
 };
 
 static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
@@ -538,7 +538,15 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 		.device		= PCI_DEVICE_ID_INTEL_MRST_SD1,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
-		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_MRST_SD2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
 	},
 
 	{
@@ -637,6 +645,7 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 {
 	struct sdhci_pci_chip *chip;
 	struct sdhci_pci_slot *slot;
+	mmc_pm_flag_t slot_pm_flags;
 	mmc_pm_flag_t pm_flags = 0;
 	int i, ret;
 
@@ -657,7 +666,11 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 			return ret;
 		}
 
-		pm_flags |= slot->host->mmc->pm_flags;
+		slot_pm_flags = slot->host->mmc->pm_flags;
+		if (slot_pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+			sdhci_enable_irq_wakeups(slot->host);
+
+		pm_flags |= slot_pm_flags;
 	}
 
 	if (chip->fixes && chip->fixes->suspend) {
@@ -671,8 +684,10 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 
 	pci_save_state(pdev);
 	if (pm_flags & MMC_PM_KEEP_POWER) {
-		if (pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+		if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) {
+			pci_pme_active(pdev, true);
 			pci_enable_wake(pdev, PCI_D3hot, 1);
+		}
 		pci_set_power_state(pdev, PCI_D3hot);
 	} else {
 		pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 0502f89f662b..91c6766c660c 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -170,6 +170,9 @@ static const struct platform_device_id sdhci_pltfm_ids[] = {
 #ifdef CONFIG_MMC_SDHCI_ESDHC_IMX
 	{ "sdhci-esdhc-imx", (kernel_ulong_t)&sdhci_esdhc_imx_pdata },
 #endif
+#ifdef CONFIG_MMC_SDHCI_DOVE
+	{ "sdhci-dove", (kernel_ulong_t)&sdhci_dove_pdata },
+#endif
 	{ },
 };
 MODULE_DEVICE_TABLE(platform, sdhci_pltfm_ids);
diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h
index c1bfe48af56a..62118b9f9d0a 100644
--- a/drivers/mmc/host/sdhci-pltfm.h
+++ b/drivers/mmc/host/sdhci-pltfm.h
@@ -22,5 +22,6 @@ struct sdhci_pltfm_host {
 
 extern struct sdhci_pltfm_data sdhci_cns3xxx_pdata;
 extern struct sdhci_pltfm_data sdhci_esdhc_imx_pdata;
+extern struct sdhci_pltfm_data sdhci_dove_pdata;
 
 #endif /* _DRIVERS_MMC_SDHCI_PLTFM_H */
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 782c0ee3c925..f1f9658e49a5 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1185,17 +1185,31 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (host->ops->platform_send_init_74_clocks)
 		host->ops->platform_send_init_74_clocks(host, ios->power_mode);
 
-	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
-
-	if (ios->bus_width == MMC_BUS_WIDTH_8)
-		ctrl |= SDHCI_CTRL_8BITBUS;
-	else
-		ctrl &= ~SDHCI_CTRL_8BITBUS;
+	/*
+	 * If your platform has 8-bit width support but is not a v3 controller,
+	 * or if it requires special setup code, you should implement that in
+	 * platform_8bit_width().
+	 */
+	if (host->ops->platform_8bit_width)
+		host->ops->platform_8bit_width(host, ios->bus_width);
+	else {
+		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+		if (ios->bus_width == MMC_BUS_WIDTH_8) {
+			ctrl &= ~SDHCI_CTRL_4BITBUS;
+			if (host->version >= SDHCI_SPEC_300)
+				ctrl |= SDHCI_CTRL_8BITBUS;
+		} else {
+			if (host->version >= SDHCI_SPEC_300)
+				ctrl &= ~SDHCI_CTRL_8BITBUS;
+			if (ios->bus_width == MMC_BUS_WIDTH_4)
+				ctrl |= SDHCI_CTRL_4BITBUS;
+			else
+				ctrl &= ~SDHCI_CTRL_4BITBUS;
+		}
+		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+	}
 
-	if (ios->bus_width == MMC_BUS_WIDTH_4)
-		ctrl |= SDHCI_CTRL_4BITBUS;
-	else
-		ctrl &= ~SDHCI_CTRL_4BITBUS;
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 
 	if ((ios->timing == MMC_TIMING_SD_HS ||
 	     ios->timing == MMC_TIMING_MMC_HS)
@@ -1681,6 +1695,16 @@ int sdhci_resume_host(struct sdhci_host *host)
 
 EXPORT_SYMBOL_GPL(sdhci_resume_host);
 
+void sdhci_enable_irq_wakeups(struct sdhci_host *host)
+{
+	u8 val;
+	val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+	val |= SDHCI_WAKE_ON_INT;
+	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+
+EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
+
 #endif /* CONFIG_PM */
 
 /*****************************************************************************\
@@ -1845,11 +1869,21 @@ int sdhci_add_host(struct sdhci_host *host)
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
 	else
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
+
 	mmc->f_max = host->max_clk;
 	mmc->caps |= MMC_CAP_SDIO_IRQ;
 
-	if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
-		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+	/*
+	 * A controller may support 8-bit width, but the board itself
+	 * might not have the pins brought out.  So, boards that support
+	 * 8-bit width should set the below quirk, and we won't assume
+	 * that devices without the quirk can use 8-bit width.
+	 */
+	if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA)) {
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
+		if (host->quirks & SDHCI_QUIRK_SLOT_CAN_DO_8_BITS)
+			mmc->caps |= MMC_CAP_8_BIT_DATA;
+	}
 
 	if (caps & SDHCI_CAN_DO_HISPD)
 		mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index b7b8a3b28b01..e42d7f00c060 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -76,7 +76,7 @@
 #define   SDHCI_CTRL_ADMA1	0x08
 #define   SDHCI_CTRL_ADMA32	0x10
 #define   SDHCI_CTRL_ADMA64	0x18
-#define  SDHCI_CTRL_8BITBUS	0x20
+#define   SDHCI_CTRL_8BITBUS	0x20
 
 #define SDHCI_POWER_CONTROL	0x29
 #define  SDHCI_POWER_ON		0x01
@@ -87,6 +87,9 @@
 #define SDHCI_BLOCK_GAP_CONTROL	0x2A
 
 #define SDHCI_WAKE_UP_CONTROL	0x2B
+#define  SDHCI_WAKE_ON_INT	0x01
+#define  SDHCI_WAKE_ON_INSERT	0x02
+#define  SDHCI_WAKE_ON_REMOVE	0x04
 
 #define SDHCI_CLOCK_CONTROL	0x2C
 #define  SDHCI_DIVIDER_SHIFT	8
@@ -152,6 +155,7 @@
 #define  SDHCI_CLOCK_BASE_SHIFT	8
 #define  SDHCI_MAX_BLOCK_MASK	0x00030000
 #define  SDHCI_MAX_BLOCK_SHIFT  16
+#define  SDHCI_CAN_DO_8BIT	0x00040000
 #define  SDHCI_CAN_DO_ADMA2	0x00080000
 #define  SDHCI_CAN_DO_ADMA1	0x00100000
 #define  SDHCI_CAN_DO_HISPD	0x00200000
@@ -212,6 +216,8 @@ struct sdhci_ops {
 	unsigned int	(*get_max_clock)(struct sdhci_host *host);
 	unsigned int	(*get_min_clock)(struct sdhci_host *host);
 	unsigned int	(*get_timeout_clock)(struct sdhci_host *host);
+	int		(*platform_8bit_width)(struct sdhci_host *host,
+					       int width);
 	void (*platform_send_init_74_clocks)(struct sdhci_host *host,
 					     u8 power_mode);
 	unsigned int    (*get_ro)(struct sdhci_host *host);
@@ -317,6 +323,7 @@ extern void sdhci_remove_host(struct sdhci_host *host, int dead);
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
 extern int sdhci_resume_host(struct sdhci_host *host);
+extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
 #endif
 
 #endif /* __SDHCI_HW_H */
diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c
index b4ead4a13c98..f8f65df9b017 100644
--- a/drivers/mmc/host/ushc.c
+++ b/drivers/mmc/host/ushc.c
@@ -425,7 +425,7 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 	struct mmc_host *mmc;
 	struct ushc_data *ushc;
-	int ret = -ENOMEM;
+	int ret;
 
 	mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev);
 	if (mmc == NULL)
@@ -462,11 +462,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 	mmc->max_blk_count = 511;
 
 	ushc->int_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->int_urb == NULL)
+	if (ushc->int_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->int_data = kzalloc(sizeof(struct ushc_int_data), GFP_KERNEL);
-	if (ushc->int_data == NULL)
+	if (ushc->int_data == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	usb_fill_int_urb(ushc->int_urb, ushc->usb_dev,
 			 usb_rcvintpipe(usb_dev,
 					intf->cur_altsetting->endpoint[0].desc.bEndpointAddress),
@@ -475,11 +479,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 			 intf->cur_altsetting->endpoint[0].desc.bInterval);
 
 	ushc->cbw_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->cbw_urb == NULL)
+	if (ushc->cbw_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->cbw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
-	if (ushc->cbw == NULL)
+	if (ushc->cbw == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->cbw->signature = USHC_CBW_SIGNATURE;
 
 	usb_fill_bulk_urb(ushc->cbw_urb, ushc->usb_dev, usb_sndbulkpipe(usb_dev, 2),
@@ -487,15 +495,21 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 			  cbw_callback, ushc);
 
 	ushc->data_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->data_urb == NULL)
+	if (ushc->data_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 
 	ushc->csw_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->csw_urb == NULL)
+	if (ushc->csw_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
-	if (ushc->csw == NULL)
+	if (ushc->csw == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	usb_fill_bulk_urb(ushc->csw_urb, ushc->usb_dev, usb_rcvbulkpipe(usb_dev, 6),
 			  ushc->csw, sizeof(struct ushc_csw),
 			  csw_callback, ushc);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 6d87f68ce4b6..381c77fd4dca 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -168,9 +168,20 @@ struct mmc_host {
 						/* DDR mode at 1.8V */
 #define MMC_CAP_1_2V_DDR	(1 << 12)	/* can support */
 						/* DDR mode at 1.2V */
+#define MMC_CAP_POWER_OFF_CARD	(1 << 13)	/* Can power off after boot */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
+#ifdef CONFIG_MMC_CLKGATE
+	int			clk_requests;	/* internal reference counter */
+	unsigned int		clk_delay;	/* number of MCI clk hold cycles */
+	bool			clk_gated;	/* clock gated */
+	struct work_struct	clk_gate_work; /* delayed clock gate */
+	unsigned int		clk_old;	/* old clock value cache */
+	spinlock_t		clk_lock;	/* lock for clk fields */
+	struct mutex		clk_gate_mutex;	/* mutex for clock gating */
+#endif
+
 	/* host specific block data */
 	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
 	unsigned short		max_segs;	/* see blk_queue_max_segments */
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 1fdc673f2396..7fdcfca931e1 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -83,6 +83,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12		(1<<28)
 /* Controller doesn't have HISPD bit field in HI-SPEED SD card */
 #define SDHCI_QUIRK_NO_HISPD_BIT			(1<<29)
+/* Slot has 8 data pins going to eMMC/MMC card */
+#define SDHCI_QUIRK_SLOT_CAN_DO_8_BITS			(1<<30)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c6bcfe93b9ca..d369b533dc2a 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2441,6 +2441,7 @@
 #define PCI_DEVICE_ID_INTEL_MFD_SDIO2	0x0822
 #define PCI_DEVICE_ID_INTEL_MFD_EMMC0	0x0823
 #define PCI_DEVICE_ID_INTEL_MFD_EMMC1	0x0824
+#define PCI_DEVICE_ID_INTEL_MRST_SD2	0x084F
 #define PCI_DEVICE_ID_INTEL_I960	0x0960
 #define PCI_DEVICE_ID_INTEL_I960RM	0x0962
 #define PCI_DEVICE_ID_INTEL_8257X_SOL	0x1062