summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJohn 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>2021-04-19 17:29:30 -0700
committerSteven Rostedt (VMware) <rostedt@goodmis.org>2021-05-03 18:57:03 -0400
commitc043ccbfc6d83fa21512f842c5d2ba4060cee5fe (patch)
tree3b0a29396b6dce5f910e1bdf1681506f7e6d410b
parent12d4cddda2043466a5af8fc0c49e49f24f1d4c59 (diff)
ktest: Further consistency cleanups
This cleans up some additional whitespace pieces that to be more consistent, as well as moving a curly brace around, and some 'or' statements to match the rest of the file (usually or goes at the end of the line vs. at the beginning) Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-rwxr-xr-xtools/testing/ktest/ktest.pl85
1 files changed, 36 insertions, 49 deletions
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 633c715173ff..a3c6ad64c479 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -24,7 +24,7 @@ my %evals;
#default opts
my %default = (
- "MAILER" => "sendmail", # default mailer
+ "MAILER" => "sendmail", # default mailer
"EMAIL_ON_ERROR" => 1,
"EMAIL_WHEN_FINISHED" => 1,
"EMAIL_WHEN_CANCELED" => 0,
@@ -36,15 +36,15 @@ my %default = (
"CLOSE_CONSOLE_SIGNAL" => "INT",
"TIMEOUT" => 120,
"TMP_DIR" => "/tmp/ktest/\${MACHINE}",
- "SLEEP_TIME" => 60, # sleep time between tests
+ "SLEEP_TIME" => 60, # sleep time between tests
"BUILD_NOCLEAN" => 0,
"REBOOT_ON_ERROR" => 0,
"POWEROFF_ON_ERROR" => 0,
"REBOOT_ON_SUCCESS" => 1,
"POWEROFF_ON_SUCCESS" => 0,
"BUILD_OPTIONS" => "",
- "BISECT_SLEEP_TIME" => 60, # sleep time between bisects
- "PATCHCHECK_SLEEP_TIME" => 60, # sleep time between patch checks
+ "BISECT_SLEEP_TIME" => 60, # sleep time between bisects
+ "PATCHCHECK_SLEEP_TIME" => 60, # sleep time between patch checks
"CLEAR_LOG" => 0,
"BISECT_MANUAL" => 0,
"BISECT_SKIP" => 1,
@@ -537,7 +537,7 @@ sub read_prompt {
my $ans;
for (;;) {
- if ($cancel) {
+ if ($cancel) {
print "$prompt [y/n/C] ";
} else {
print "$prompt [Y/n] ";
@@ -863,7 +863,6 @@ sub value_defined {
defined($opt{$2});
}
-my $d = 0;
sub process_expression {
my ($name, $val) = @_;
@@ -978,7 +977,6 @@ sub __read_config {
$override = 0;
if ($type eq "TEST_START") {
-
if ($num_tests_set) {
die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
}
@@ -1048,7 +1046,6 @@ sub __read_config {
$test_num = $old_test_num;
$repeat = $old_repeat;
}
-
} elsif (/^\s*ELSE\b(.*)$/) {
if (!$if) {
die "$name: $.: ELSE found with out matching IF section\n$_";
@@ -1471,7 +1468,6 @@ sub get_test_name() {
}
sub dodie {
-
# avoid recursion
return if ($in_die);
$in_die = 1;
@@ -1481,10 +1477,8 @@ sub dodie {
doprint "CRITICAL FAILURE... [TEST $i] ", @_, "\n";
if ($reboot_on_error && !do_not_reboot) {
-
doprint "REBOOTING\n";
reboot_to_good;
-
} elsif ($poweroff_on_error && defined($power_off)) {
doprint "POWERING OFF\n";
`$power_off`;
@@ -1519,8 +1513,9 @@ sub dodie {
close O;
close L;
}
+
send_email("KTEST: critical failure for test $i [$name]",
- "Your test started at $script_start_time has failed with:\n@_\n", $log_file);
+ "Your test started at $script_start_time has failed with:\n@_\n", $log_file);
}
if ($monitor_cnt) {
@@ -1915,8 +1910,8 @@ sub _get_grub_index {
my ($command, $target, $skip) = @_;
return if (defined($grub_number) && defined($last_grub_menu) &&
- $last_grub_menu eq $grub_menu && defined($last_machine) &&
- $last_machine eq $machine);
+ $last_grub_menu eq $grub_menu && defined($last_machine) &&
+ $last_machine eq $machine);
doprint "Find $reboot_type menu ... ";
$grub_number = -1;
@@ -1924,8 +1919,8 @@ sub _get_grub_index {
my $ssh_grub = $ssh_exec;
$ssh_grub =~ s,\$SSH_COMMAND,$command,g;
- open(IN, "$ssh_grub |")
- or dodie "unable to execute $command";
+ open(IN, "$ssh_grub |") or
+ dodie "unable to execute $command";
my $found = 0;
@@ -1979,8 +1974,7 @@ sub get_grub_index {
_get_grub_index($command, $target, $skip);
}
-sub wait_for_input
-{
+sub wait_for_input {
my ($fp, $time) = @_;
my $start_time;
my $rin;
@@ -2096,7 +2090,6 @@ sub monitor {
my $version_found = 0;
while (!$done) {
-
if ($bug && defined($stop_after_failure) &&
$stop_after_failure >= 0) {
my $time = $stop_after_failure - (time - $failure_start);
@@ -2571,7 +2564,6 @@ sub build {
run_command "mv $outputdir/config_temp $output_config" or
dodie "moving config_temp";
}
-
} elsif (!$noclean) {
unlink "$output_config";
run_command "$make mrproper" or
@@ -2652,11 +2644,12 @@ sub success {
print_times;
- doprint "\n\n*******************************************\n";
- doprint "*******************************************\n";
- doprint "KTEST RESULT: TEST $i$name SUCCESS!!!! **\n";
- doprint "*******************************************\n";
- doprint "*******************************************\n";
+ doprint "\n\n";
+ doprint "*******************************************\n";
+ doprint "*******************************************\n";
+ doprint "KTEST RESULT: TEST $i$name SUCCESS!!!! **\n";
+ doprint "*******************************************\n";
+ doprint "*******************************************\n";
if (defined($store_successes)) {
save_logs "success", $store_successes;
@@ -3034,7 +3027,6 @@ sub bisect {
}
if ($do_check) {
-
# get current HEAD
my $head = get_sha1("HEAD");
@@ -3074,13 +3066,11 @@ sub bisect {
run_command "git bisect replay $replay" or
dodie "failed to run replay";
} else {
-
run_command "git bisect good $good" or
dodie "could not set bisect good to $good";
run_git_bisect "git bisect bad $bad" or
dodie "could not set bisect bad to $bad";
-
}
if (defined($start)) {
@@ -3133,8 +3123,8 @@ sub assign_configs {
doprint "Reading configs from $config\n";
- open (IN, $config)
- or dodie "Failed to read $config";
+ open (IN, $config) or
+ dodie "Failed to read $config";
while (<IN>) {
chomp;
@@ -3287,10 +3277,11 @@ sub config_bisect {
if (!defined($config_bisect_exec)) {
# First check the location that ktest.pl ran
- my @locations = ( "$pwd/config-bisect.pl",
- "$dirname/config-bisect.pl",
- "$builddir/tools/testing/ktest/config-bisect.pl",
- undef );
+ my @locations = (
+ "$pwd/config-bisect.pl",
+ "$dirname/config-bisect.pl",
+ "$builddir/tools/testing/ktest/config-bisect.pl",
+ undef );
foreach my $loc (@locations) {
doprint "loc = $loc\n";
$config_bisect_exec = $loc;
@@ -3632,8 +3623,8 @@ sub read_kconfig {
sub read_depends {
# find out which arch this is by the kconfig file
- open (IN, $output_config)
- or dodie "Failed to read $output_config";
+ open (IN, $output_config) or
+ dodie "Failed to read $output_config";
my $arch;
while (<IN>) {
if (m,Linux/(\S+)\s+\S+\s+Kernel Configuration,) {
@@ -3708,7 +3699,6 @@ sub get_depends {
my @configs;
while ($dep =~ /[$valid]/) {
-
if ($dep =~ /^[^$valid]*([$valid]+)/) {
my $conf = "CONFIG_" . $1;
@@ -3889,7 +3879,6 @@ sub make_min_config {
my $take_two = 0;
while (!$done) {
-
my $config;
my $found;
@@ -3900,7 +3889,7 @@ sub make_min_config {
# Sort keys by who is most dependent on
@test_configs = sort { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} }
- @test_configs ;
+ @test_configs ;
# Put configs that did not modify the config at the end.
my $reset = 1;
@@ -3976,8 +3965,8 @@ sub make_min_config {
# update new ignore configs
if (defined($ignore_config)) {
- open (OUT, ">$temp_config")
- or dodie "Can't write to $temp_config";
+ open (OUT, ">$temp_config") or
+ dodie "Can't write to $temp_config";
foreach my $config (keys %save_configs) {
print OUT "$save_configs{$config}\n";
}
@@ -4004,8 +3993,8 @@ sub make_min_config {
}
# Save off all the current mandatory configs
- open (OUT, ">$temp_config")
- or dodie "Can't write to $temp_config";
+ open (OUT, ">$temp_config") or
+ dodie "Can't write to $temp_config";
foreach my $config (keys %keep_configs) {
print OUT "$keep_configs{$config}\n";
}
@@ -4043,7 +4032,6 @@ sub make_warnings_file {
open(IN, $buildlog) or dodie "Can't open $buildlog";
while (<IN>) {
-
# Some compilers use UTF-8 extended for quotes
# for distcc heterogeneous systems, this causes issues
s/$utf8_quote/'/g;
@@ -4263,7 +4251,6 @@ sub do_send_mail {
}
sub send_email {
-
if (defined($mailto)) {
if (!defined($mailer)) {
doprint "No email sent: email or mailer not specified in config.\n";
@@ -4277,7 +4264,7 @@ sub cancel_test {
if ($email_when_canceled) {
my $name = get_test_name;
send_email("KTEST: Your [$name] test was cancelled",
- "Your test started at $script_start_time was cancelled: sig int");
+ "Your test started at $script_start_time was cancelled: sig int");
}
die "\nCaught Sig Int, test interrupted: $!\n"
}
@@ -4332,7 +4319,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
if ($email_when_started) {
my $name = get_test_name;
send_email("KTEST: Your [$name] test was started",
- "Your test was started on $script_start_time");
+ "Your test was started on $script_start_time");
}
}
@@ -4411,7 +4398,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
my $ret = run_command $pre_test;
if (!$ret && defined($pre_test_die) &&
$pre_test_die) {
- dodie "failed to pre_test\n";
+ dodie "failed to pre_test\n";
}
}
@@ -4509,7 +4496,7 @@ doprint "\n $successes of $opt{NUM_TESTS} tests were successful\n\n";
if ($email_when_finished) {
send_email("KTEST: Your test has finished!",
- "$successes of $opt{NUM_TESTS} tests started at $script_start_time were successful!");
+ "$successes of $opt{NUM_TESTS} tests started at $script_start_time were successful!");
}
if (defined($opt{"LOG_FILE"})) {