summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@woody.linux-foundation.org>2007-05-30 10:04:01 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-05-30 10:04:01 -0700
commitf54496f55a729078e9eef90bf9e0783857a27db1 (patch)
tree104cf71ea8349a35990a9d3b58679229a604df31
parentaa2d3322989d8fd40fb2e417142c9a029d7831a4 (diff)
parentcdea460643072e1ee3647434aa254b5b81364f68 (diff)
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix some section mismatch warnings [ARM] 4417/1: Serial: Fix AMBA drivers locking [ARM] 4394/1: ARMv7: Add the TLB range operations [ARM] 4410/1: Remove extern declarations in coyote/ixdpg425-pci.c [ARM] 4416/1: NWFPE: fix undeclared symbols [ARM] 4415/1: AML5900: fix sparse warnings from map_io [ARM] 4414/1: S3C2443: sparse fix for clock.c [ARM] 4412/1: S3C2412: reset errata fix [ARM] 4411/1: KS8695: Another serial driver fix [ARM] oprofile: avoid lockdep warnings on mpcore oprofile init [ARM] Fix stacktrace FP range checking [ARM] use __used attribute [ARM] enable arbitary speed tty ioctls and split input/output speed [ARM] remove unused header file: arch/arm/mach-s3c2410/bast.h [ARM] 4406/1: Trivial NSLU2 / NAS-100D header & setup code cleanup [ARM] 4405/1: NSLU2, DSM-G600 frequency fixup code [ARM] 4404/1: Trivial IXP42x Kconfig cleanup [ARM] 4403/1: Make the PXA-I2C driver work with lockdep validator [ARM] 4402/1: S3C2443: Add physical address of HSMMC controller [ARM] 4401/1: S3C2443: Add definitions for port GPIOJ
-rw-r--r--arch/arm/kernel/armksyms.c2
-rw-r--r--arch/arm/kernel/stacktrace.c2
-rw-r--r--arch/arm/mach-at91/board-dk.c2
-rw-r--r--arch/arm/mach-at91/board-kb9202.c2
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c2
-rw-r--r--arch/arm/mach-at91/board-sam9rlek.c2
-rw-r--r--arch/arm/mach-footbridge/cats-pci.c2
-rw-r--r--arch/arm/mach-imx/generic.c1
-rw-r--r--arch/arm/mach-ixp2000/ixdp2400.c2
-rw-r--r--arch/arm/mach-ixp2000/ixdp2800.c2
-rw-r--r--arch/arm/mach-ixp2000/ixdp2x00.c2
-rw-r--r--arch/arm/mach-ixp23xx/ixdp2351.c2
-rw-r--r--arch/arm/mach-ixp23xx/pci.c2
-rw-r--r--arch/arm/mach-ixp23xx/roadrunner.c2
-rw-r--r--arch/arm/mach-ixp4xx/Kconfig3
-rw-r--r--arch/arm/mach-ixp4xx/common.c2
-rw-r--r--arch/arm/mach-ixp4xx/coyote-pci.c4
-rw-r--r--arch/arm/mach-ixp4xx/dsmg600-setup.c24
-rw-r--r--arch/arm/mach-ixp4xx/ixdpg425-pci.c4
-rw-r--r--arch/arm/mach-ixp4xx/nas100d-setup.c3
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-setup.c37
-rw-r--r--arch/arm/mach-s3c2410/bast.h2
-rw-r--r--arch/arm/mach-s3c2410/mach-amlm5900.c2
-rw-r--r--arch/arm/mach-s3c2412/s3c2412.c24
-rw-r--r--arch/arm/mach-s3c2443/clock.c3
-rw-r--r--arch/arm/mach-sa1100/neponset.c4
-rw-r--r--arch/arm/mm/Kconfig5
-rw-r--r--arch/arm/mm/Makefile1
-rw-r--r--arch/arm/mm/proc-v7.S2
-rw-r--r--arch/arm/mm/tlb-v7.S88
-rw-r--r--arch/arm/nwfpe/softfloat.h3
-rw-r--r--arch/arm/oprofile/op_model_mpcore.c9
-rw-r--r--drivers/i2c/busses/i2c-pxa.c23
-rw-r--r--drivers/input/serio/sa1111ps2.c4
-rw-r--r--drivers/serial/amba-pl010.c3
-rw-r--r--drivers/serial/amba-pl011.c3
-rw-r--r--drivers/serial/serial_ks8695.c2
-rw-r--r--include/asm-arm/arch-ixp4xx/nas100d.h28
-rw-r--r--include/asm-arm/arch-ixp4xx/nslu2.h46
-rw-r--r--include/asm-arm/arch-ixp4xx/platform.h1
-rw-r--r--include/asm-arm/arch-s3c2410/map.h4
-rw-r--r--include/asm-arm/arch-s3c2410/regs-gpioj.h4
-rw-r--r--include/asm-arm/arch-s3c2410/regs-s3c2412.h21
-rw-r--r--include/asm-arm/ioctls.h4
-rw-r--r--include/asm-arm/mach/arch.h2
-rw-r--r--include/asm-arm/setup.h4
-rw-r--r--include/asm-arm/termbits.h16
-rw-r--r--include/asm-arm/termios.h6
-rw-r--r--include/asm-arm/tlbflush.h13
-rw-r--r--include/asm-arm26/setup.h2
51 files changed, 291 insertions, 144 deletions
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 9179e8220314..f73d62e8ab60 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -57,7 +57,7 @@ extern void fp_enter(void);
#define EXPORT_SYMBOL_ALIAS(sym,orig) \
EXPORT_CRC_ALIAS(sym) \
static const struct kernel_symbol __ksymtab_##sym \
- __attribute_used__ __attribute__((section("__ksymtab"))) = \
+ __used __attribute__((section("__ksymtab"))) = \
{ (unsigned long)&orig, #sym };
/*
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 8b63ad89d0a8..ae31deb2d065 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -13,7 +13,7 @@ int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high,
/*
* Check current frame pointer is within bounds
*/
- if ((fp - 12) < low || fp + 4 >= high)
+ if (fp < (low + 12) || fp + 4 >= high)
break;
frame = (struct stackframe *)(fp - 12);
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 6043c38c0a9e..af497896a96c 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -132,7 +132,7 @@ static struct mtd_partition __initdata dk_nand_partition[] = {
},
};
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
{
*num_partitions = ARRAY_SIZE(dk_nand_partition);
return dk_nand_partition;
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 76f6e1e553ea..7d9b1a278fd6 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -96,7 +96,7 @@ static struct mtd_partition __initdata kb9202_nand_partition[] = {
},
};
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
{
*num_partitions = ARRAY_SIZE(kb9202_nand_partition);
return kb9202_nand_partition;
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 1f0c8a400b3a..26ca8ab3f62a 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -178,7 +178,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
},
};
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
{
*num_partitions = ARRAY_SIZE(ek_nand_partition);
return ek_nand_partition;
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index f57458559fb6..c164c8e58ae6 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -180,7 +180,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
},
};
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
{
*num_partitions = ARRAY_SIZE(ek_nand_partition);
return ek_nand_partition;
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 30c79aca84d4..9b61320f295a 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -87,7 +87,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
},
};
-static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
{
*num_partitions = ARRAY_SIZE(ek_nand_partition);
return ek_nand_partition;
diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c
index 4f984fde7375..35eb232a649a 100644
--- a/arch/arm/mach-footbridge/cats-pci.c
+++ b/arch/arm/mach-footbridge/cats-pci.c
@@ -45,7 +45,7 @@ static struct hw_pci cats_pci __initdata = {
.postinit = dc21285_postinit,
};
-static int cats_pci_init(void)
+static int __init cats_pci_init(void)
{
if (machine_is_cats())
pci_common_init(&cats_pci);
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 7a7fa51ec62c..1c474cf709ca 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -201,7 +201,6 @@ void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
{
imx_mmc_device.dev.platform_data = info;
}
-EXPORT_SYMBOL(imx_set_mmc_info);
static struct imxfb_mach_info imx_fb_info;
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 0fdd03ab36e6..ce7c15c73004 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -164,7 +164,7 @@ int __init ixdp2400_pci_init(void)
subsys_initcall(ixdp2400_pci_init);
-void ixdp2400_init_irq(void)
+void __init ixdp2400_init_irq(void)
{
ixdp2x00_init_irq(IXDP2400_CPLD_INT_STAT, IXDP2400_CPLD_INT_MASK, IXDP2400_NR_IRQS);
}
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 70d247f09a7e..14f09b80ab77 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -279,7 +279,7 @@ int __init ixdp2800_pci_init(void)
subsys_initcall(ixdp2800_pci_init);
-void ixdp2800_init_irq(void)
+void __init ixdp2800_init_irq(void)
{
ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS);
}
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 011065b967b4..73c651e83d92 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -145,7 +145,7 @@ static struct irq_chip ixdp2x00_cpld_irq_chip = {
.unmask = ixdp2x00_irq_unmask
};
-void ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_irqs)
+void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_irqs)
{
unsigned int irq;
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index 7a86a2516eaa..c41a6b5a0acc 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -124,7 +124,7 @@ static struct irq_chip ixdp2351_intb_chip = {
.unmask = ixdp2351_intb_unmask
};
-void ixdp2351_init_irq(void)
+void __init ixdp2351_init_irq(void)
{
int irq;
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index ac7d43d23c28..227f808dc0ec 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -284,7 +284,7 @@ int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
return 1;
}
-void ixp23xx_pci_slave_init(void)
+void __init ixp23xx_pci_slave_init(void)
{
ixp23xx_pci_common_init();
}
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index d06e21b70de5..e35644961aa4 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -110,7 +110,7 @@ static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
return NO_IRQ;
}
-static void roadrunner_pci_preinit(void)
+static void __init roadrunner_pci_preinit(void)
{
set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW);
set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW);
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 9715ef506c24..060909870b50 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -104,9 +104,6 @@ config MACH_DSMG600
DSM-G600 RevA device. For more information on this platform,
see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
-#
-# Avila and IXDP share the same source for now. Will change in future
-#
config ARCH_IXDP4XX
bool
depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 64685da1462d..8112f726ffa0 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -283,7 +283,7 @@ static struct irqaction ixp4xx_timer_irq = {
.handler = ixp4xx_timer_interrupt,
};
-static void __init ixp4xx_timer_init(void)
+void __init ixp4xx_timer_init(void)
{
/* Reset/disable counter */
*IXP4XX_OSRT1 = 0;
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index 7bc94f3def1c..ad2e5b97966e 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -25,10 +25,6 @@
#include <asm/mach/pci.h>
-extern void ixp4xx_pci_preinit(void);
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-
void __init coyote_pci_preinit(void)
{
set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW);
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 1caff65e22cc..1e75e105c4f7 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -18,6 +18,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include <asm/mach/time.h>
static struct flash_platform_data dsmg600_flash_data = {
.map_name = "cfi_probe",
@@ -128,6 +129,19 @@ static void dsmg600_power_off(void)
gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
}
+static void __init dsmg600_timer_init(void)
+{
+ /* The xtal on this machine is non-standard. */
+ ixp4xx_timer_freq = DSMG600_FREQ;
+
+ /* Call standard timer_init function. */
+ ixp4xx_timer_init();
+}
+
+static struct sys_timer dsmg600_timer = {
+ .init = dsmg600_timer_init,
+};
+
static void __init dsmg600_init(void)
{
ixp4xx_sys_init();
@@ -155,21 +169,13 @@ static void __init dsmg600_init(void)
#endif
}
-static void __init dsmg600_fixup(struct machine_desc *desc,
- struct tag *tags, char **cmdline, struct meminfo *mi)
-{
- /* The xtal on this machine is non-standard. */
- ixp4xx_timer_freq = DSMG600_FREQ;
-}
-
MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
/* Maintainer: www.nslu2-linux.org */
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
.boot_params = 0x00000100,
- .fixup = dsmg600_fixup,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .timer = &dsmg600_timer,
.init_machine = dsmg600_init,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index 509a95a692a4..d1e75b7dc3b1 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -23,10 +23,6 @@
#include <asm/mach/pci.h>
-extern void ixp4xx_pci_preinit(void);
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-
void __init ixdpg425_pci_preinit(void)
{
set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 9a31444d9214..78a17413ceca 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -155,7 +155,8 @@ static void __init nas100d_init(void)
pm_power_off = nas100d_power_off;
- /* This is only useful on a modified machine, but it is valuable
+ /*
+ * This is only useful on a modified machine, but it is valuable
* to have it first in order to see debug messages, and so that
* it does *not* get removed if platform_add_devices fails!
*/
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 162c266e5f8f..9bf8ccbcaccf 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -22,6 +22,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
+#include <asm/mach/time.h>
static struct flash_platform_data nslu2_flash_data = {
.map_name = "cfi_probe",
@@ -49,26 +50,26 @@ static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = {
static struct resource nslu2_led_resources[] = {
{
.name = "ready", /* green led */
- .start = NSLU2_LED_GRN,
- .end = NSLU2_LED_GRN,
+ .start = NSLU2_LED_GRN_GPIO,
+ .end = NSLU2_LED_GRN_GPIO,
.flags = IXP4XX_GPIO_HIGH,
},
{
.name = "status", /* red led */
- .start = NSLU2_LED_RED,
- .end = NSLU2_LED_RED,
+ .start = NSLU2_LED_RED_GPIO,
+ .end = NSLU2_LED_RED_GPIO,
.flags = IXP4XX_GPIO_HIGH,
},
{
.name = "disk-1",
- .start = NSLU2_LED_DISK1,
- .end = NSLU2_LED_DISK1,
+ .start = NSLU2_LED_DISK1_GPIO,
+ .end = NSLU2_LED_DISK1_GPIO,
.flags = IXP4XX_GPIO_LOW,
},
{
.name = "disk-2",
- .start = NSLU2_LED_DISK2,
- .end = NSLU2_LED_DISK2,
+ .start = NSLU2_LED_DISK2_GPIO,
+ .end = NSLU2_LED_DISK2_GPIO,
.flags = IXP4XX_GPIO_LOW,
},
};
@@ -157,10 +158,21 @@ static void nslu2_power_off(void)
gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
}
-static void __init nslu2_init(void)
+static void __init nslu2_timer_init(void)
{
- ixp4xx_timer_freq = NSLU2_FREQ;
+ /* The xtal on this machine is non-standard. */
+ ixp4xx_timer_freq = NSLU2_FREQ;
+
+ /* Call standard timer_init function. */
+ ixp4xx_timer_init();
+}
+static struct sys_timer nslu2_timer = {
+ .init = nslu2_timer_init,
+};
+
+static void __init nslu2_init(void)
+{
ixp4xx_sys_init();
nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
@@ -169,7 +181,8 @@ static void __init nslu2_init(void)
pm_power_off = nslu2_power_off;
- /* This is only useful on a modified machine, but it is valuable
+ /*
+ * This is only useful on a modified machine, but it is valuable
* to have it first in order to see debug messages, and so that
* it does *not* get removed if platform_add_devices fails!
*/
@@ -185,6 +198,6 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
.boot_params = 0x00000100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
+ .timer = &nslu2_timer,
.init_machine = nslu2_init,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/bast.h b/arch/arm/mach-s3c2410/bast.h
deleted file mode 100644
index e98543742eb9..000000000000
--- a/arch/arm/mach-s3c2410/bast.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/bast.h
-extern void bast_init_irq(void);
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index bc308ceb91c3..435adcce6482 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -160,7 +160,7 @@ static struct platform_device *amlm5900_devices[] __initdata = {
#endif
};
-void __init amlm5900_map_io(void)
+static void __init amlm5900_map_io(void)
{
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
s3c24xx_init_clocks(0);
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index c602aa39f9c4..782b5814ced2 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
@@ -29,6 +30,7 @@
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/arch/reset.h>
#include <asm/arch/idle.h>
#include <asm/arch/regs-clock.h>
@@ -38,6 +40,7 @@
#include <asm/arch/regs-gpioj.h>
#include <asm/arch/regs-dsc.h>
#include <asm/arch/regs-spi.h>
+#include <asm/arch/regs-s3c2412.h>
#include <asm/plat-s3c24xx/s3c2412.h>
#include <asm/plat-s3c24xx/cpu.h>
@@ -106,6 +109,23 @@ static void s3c2412_idle(void)
cpu_do_idle();
}
+static void s3c2412_hard_reset(void)
+{
+ /* errata "Watch-dog/Software Reset Problem" specifies that
+ * this reset must be done with the SYSCLK sourced from
+ * EXTCLK instead of FOUT to avoid a glitch in the reset
+ * mechanism.
+ *
+ * See the watchdog section of the S3C2412 manual for more
+ * information on this fix.
+ */
+
+ __raw_writel(0x00, S3C2412_CLKSRC);
+ __raw_writel(S3C2412_SWRST_RESET, S3C2412_SWRST);
+
+ mdelay(1);
+}
+
/* s3c2412_map_io
*
* register the standard cpu IO areas, and any passed in from the
@@ -122,6 +142,10 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
s3c24xx_idle = s3c2412_idle;
+ /* set custom reset hook */
+
+ s3c24xx_reset_hook = s3c2412_hard_reset;
+
/* register our io-tables */
iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 5955efb5de8d..58402948c47c 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -394,7 +394,7 @@ static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate)
return 0;
}
-struct clk clk_usb_bus_host = {
+static struct clk clk_usb_bus_host = {
.name = "usb-bus-host-parent",
.id = -1,
.parent = &clk_esysclk,
@@ -758,7 +758,6 @@ static struct clk init_clocks[] = {
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_CFC,
- .ctrlbit = S3C2443_HCLKCON_HSMMC,
}, {
.name = "ssmc",
.id = -1,
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index d7c038a0256b..4cbf9468f654 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -139,12 +139,12 @@ static u_int neponset_get_mctrl(struct uart_port *port)
return ret;
}
-static struct sa1100_port_fns neponset_port_fns __initdata = {
+static struct sa1100_port_fns neponset_port_fns __devinitdata = {
.set_mctrl = neponset_set_mctrl,
.get_mctrl = neponset_get_mctrl,
};
-static int neponset_probe(struct platform_device *dev)
+static int __devinit neponset_probe(struct platform_device *dev)
{
sa1100_register_uart_fns(&neponset_port_fns);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 5f472a8b406a..e7904bc92c73 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -379,7 +379,7 @@ config CPU_V7
select CPU_CP15_MMU
select CPU_HAS_ASID
select CPU_COPY_V6 if MMU
- select CPU_TLB_V6 if MMU
+ select CPU_TLB_V7 if MMU
# Figure out what processor architecture version we should be using.
# This defines the compiler instruction set which depends on the machine type.
@@ -498,6 +498,9 @@ config CPU_TLB_V4WBI
config CPU_TLB_V6
bool
+config CPU_TLB_V7
+ bool
+
endif
config CPU_HAS_ASID
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index b5bd335ff14a..762702765fc3 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o
obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o
obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o
obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o
+obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o
obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o
obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index dd823dd4a374..718f4782ee8b 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -256,7 +256,7 @@ __v7_proc_info:
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
.long cpu_v7_name
.long v7_processor_functions
- .long v6wbi_tlb_fns
+ .long v7wbi_tlb_fns
.long v6_user_fns
.long v7_cache_fns
.size __v7_proc_info, . - __v7_proc_info
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
new file mode 100644
index 000000000000..b56dda8052f7
--- /dev/null
+++ b/arch/arm/mm/tlb-v7.S
@@ -0,0 +1,88 @@
+/*
+ * linux/arch/arm/mm/tlb-v7.S
+ *
+ * Copyright (C) 1997-2002 Russell King
+ * Modified for ARMv7 by Catalin Marinas
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ARM architecture version 6 TLB handling functions.
+ * These assume a split I/D TLB.
+ */
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+#include "proc-macros.S"
+
+/*
+ * v7wbi_flush_user_tlb_range(start, end, vma)
+ *
+ * Invalidate a range of TLB entries in the specified address space.
+ *
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ * - vma - vma_struct describing address range
+ *
+ * It is assumed that:
+ * - the "Invalidate single entry" instruction will invalidate
+ * both the I and the D TLBs on Harvard-style TLBs
+ */
+ENTRY(v7wbi_flush_user_tlb_range)
+ vma_vm_mm r3, r2 @ get vma->vm_mm
+ mmid r3, r3 @ get vm_mm->context.id
+ dsb
+ mov r0, r0, lsr #PAGE_SHIFT @ align address
+ mov r1, r1, lsr #PAGE_SHIFT
+ asid r3, r3 @ mask ASID
+ orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA
+ mov r1, r1, lsl #PAGE_SHIFT
+ vma_vm_flags r2, r2 @ get vma->vm_flags
+1:
+ mcr p15, 0, r0, c8, c6, 1 @ TLB invalidate D MVA (was 1)
+ tst r2, #VM_EXEC @ Executable area ?
+ mcrne p15, 0, r0, c8, c5, 1 @ TLB invalidate I MVA (was 1)
+ add r0, r0, #PAGE_SZ
+ cmp r0, r1
+ blo 1b
+ mov ip, #0
+ mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB
+ dsb
+ mov pc, lr
+
+/*
+ * v7wbi_flush_kern_tlb_range(start,end)
+ *
+ * Invalidate a range of kernel TLB entries
+ *
+ * - start - start address (may not be aligned)
+ * - end - end address (exclusive, may not be aligned)
+ */
+ENTRY(v7wbi_flush_kern_tlb_range)
+ dsb
+ mov r0, r0, lsr #PAGE_SHIFT @ align address
+ mov r1, r1, lsr #PAGE_SHIFT
+ mov r0, r0, lsl #PAGE_SHIFT
+ mov r1, r1, lsl #PAGE_SHIFT
+1:
+ mcr p15, 0, r0, c8, c6, 1 @ TLB invalidate D MVA
+ mcr p15, 0, r0, c8, c5, 1 @ TLB invalidate I MVA
+ add r0, r0, #PAGE_SZ
+ cmp r0, r1
+ blo 1b
+ mov r2, #0
+ mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
+ dsb
+ isb
+ mov pc, lr
+
+ .section ".text.init", #alloc, #execinstr
+
+ .type v7wbi_tlb_fns, #object
+ENTRY(v7wbi_tlb_fns)
+ .long v7wbi_flush_user_tlb_range
+ .long v7wbi_flush_kern_tlb_range
+ .long v6wbi_tlb_flags
+ .size v7wbi_tlb_fns, . - v7wbi_tlb_fns
diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h
index 0a3067452cd2..260fe29d73f5 100644
--- a/arch/arm/nwfpe/softfloat.h
+++ b/arch/arm/nwfpe/softfloat.h
@@ -273,4 +273,7 @@ static inline flag float64_lt_nocheck(float64 a, float64 b)
extern flag float32_is_nan( float32 a );
extern flag float64_is_nan( float64 a );
+extern int32 float64_to_uint32( struct roundingData *roundData, float64 a );
+extern int32 float64_to_uint32_round_to_zero( float64 a );
+
#endif
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 898500718249..7791da791f5f 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -257,8 +257,13 @@ static void em_stop(void)
*/
static void em_route_irq(int irq, unsigned int cpu)
{
- irq_desc[irq].affinity = cpumask_of_cpu(cpu);
- irq_desc[irq].chip->set_affinity(irq, cpumask_of_cpu(cpu));
+ struct irq_desc *desc = irq_desc + irq;
+ cpumask_t mask = cpumask_of_cpu(cpu);
+
+ spin_lock_irq(&desc->lock);
+ desc->affinity = mask;
+ desc->chip->set_affinity(irq, mask);
+ spin_unlock_irq(&desc->lock);
}
static int em_setup(void)
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 8a0a99b93641..28e7b91a4553 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -837,20 +837,10 @@ static const struct i2c_algorithm i2c_pxa_algorithm = {
.functionality = i2c_pxa_functionality,
};
-static struct pxa_i2c i2c_pxa = {
- .lock = __SPIN_LOCK_UNLOCKED(i2c_pxa.lock),
- .adap = {
- .owner = THIS_MODULE,
- .algo = &i2c_pxa_algorithm,
- .name = "pxa2xx-i2c.0",
- .retries = 5,
- },
-};
-
#define res_len(r) ((r)->end - (r)->start + 1)
static int i2c_pxa_probe(struct platform_device *dev)
{
- struct pxa_i2c *i2c = &i2c_pxa;
+ struct pxa_i2c *i2c;
struct resource *res;
struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
int ret;
@@ -864,15 +854,20 @@ static int i2c_pxa_probe(struct platform_device *dev)
if (!request_mem_region(res->start, res_len(res), res->name))
return -ENOMEM;
- i2c = kmalloc(sizeof(struct pxa_i2c), GFP_KERNEL);
+ i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL);
if (!i2c) {
ret = -ENOMEM;
goto emalloc;
}
- memcpy(i2c, &i2c_pxa, sizeof(struct pxa_i2c));
+ i2c->adap.owner = THIS_MODULE;
+ i2c->adap.algo = &i2c_pxa_algorithm;
+ i2c->adap.retries = 5;
+
+ spin_lock_init(&i2c->lock);
init_waitqueue_head(&i2c->wait);
- i2c->adap.name[strlen(i2c->adap.name) - 1] = '0' + dev->id % 10;
+
+ sprintf(i2c->adap.name, "pxa_i2c-i2c.%u", dev->id);
i2c->reg_base = ioremap(res->start, res_len(res));
if (!i2c->reg_base) {
diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c
index 559508795af1..d31ece8f68e9 100644
--- a/drivers/input/serio/sa1111ps2.c
+++ b/drivers/input/serio/sa1111ps2.c
@@ -170,7 +170,7 @@ static void ps2_close(struct serio *io)
/*
* Clear the input buffer.
*/
-static void __init ps2_clear_input(struct ps2if *ps2if)
+static void __devinit ps2_clear_input(struct ps2if *ps2if)
{
int maxread = 100;
@@ -228,7 +228,7 @@ static int __init ps2_test(struct ps2if *ps2if)
/*
* Add one device to this driver.
*/
-static int ps2_probe(struct sa1111_dev *dev)
+static int __devinit ps2_probe(struct sa1111_dev *dev)
{
struct ps2if *ps2if;
struct serio *serio;
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 1a9a24b82636..00d1255e4c12 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -167,8 +167,9 @@ static void pl010_rx_chars(struct uart_amba_port *uap)
ignore_char:
status = readb(uap->port.membase + UART01x_FR);
}
+ spin_unlock(&port->lock);
tty_flip_buffer_push(tty);
- return;
+ spin_lock(&port->lock);
}
static void pl010_tx_chars(struct uart_amba_port *uap)
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 44639e71372a..954073c6ce3a 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -153,8 +153,9 @@ static void pl011_rx_chars(struct uart_amba_port *uap)
ignore_char:
status = readw(uap->port.membase + UART01x_FR);
}
+ spin_unlock(&uap->port.lock);
tty_flip_buffer_push(tty);
- return;
+ spin_lock(&uap->port.lock);
}
static void pl011_tx_chars(struct uart_amba_port *uap)
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 698763b28ddd..8721afe1ae4f 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -589,7 +589,7 @@ static int __init ks8695_console_setup(struct console *co, char *options)
return uart_set_options(port, co, baud, parity, bits, flow);
}
-extern struct uart_driver ks8695_reg;
+static struct uart_driver ks8695_reg;
static struct console ks8695_console = {
.name = SERIAL_KS8695_DEVNAME,
diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h
index 84467a5190d0..131e0a1d0df3 100644
--- a/include/asm-arm/arch-ixp4xx/nas100d.h
+++ b/include/asm-arm/arch-ixp4xx/nas100d.h
@@ -10,7 +10,7 @@
* based on ixdp425.h:
* Copyright 2004 (c) MontaVista, Software, Inc.
*
- * This file is licensed under the terms of the GNU General Public
+ * This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
@@ -36,31 +36,11 @@
#define NAS100D_PCI_INTD_PIN 8
#define NAS100D_PCI_INTE_PIN 7
-/* GPIO */
-
-#define NAS100D_GPIO0 0
-#define NAS100D_GPIO1 1
-#define NAS100D_GPIO2 2
-#define NAS100D_GPIO3 3
-#define NAS100D_GPIO4 4
-#define NAS100D_GPIO5 5
-#define NAS100D_GPIO6 6
-#define NAS100D_GPIO7 7
-#define NAS100D_GPIO8 8
-#define NAS100D_GPIO9 9
-#define NAS100D_GPIO10 10
-#define NAS100D_GPIO11 11
-#define NAS100D_GPIO12 12
-#define NAS100D_GPIO13 13
-#define NAS100D_GPIO14 14
-#define NAS100D_GPIO15 15
-
-
/* Buttons */
-#define NAS100D_PB_GPIO NAS100D_GPIO14
-#define NAS100D_RB_GPIO NAS100D_GPIO4
-#define NAS100D_PO_GPIO NAS100D_GPIO12 /* power off */
+#define NAS100D_PB_GPIO 14
+#define NAS100D_RB_GPIO 4
+#define NAS100D_PO_GPIO 12 /* power off */
#define NAS100D_PB_IRQ IRQ_IXP4XX_GPIO14
#define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4
diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h
index 6b437f7c9955..850fdc5b45da 100644
--- a/include/asm-arm/arch-ixp4xx/nslu2.h
+++ b/include/asm-arm/arch-ixp4xx/nslu2.h
@@ -9,7 +9,7 @@
* based on ixdp425.h:
* Copyright 2004 (c) MontaVista, Software, Inc.
*
- * This file is licensed under the terms of the GNU General Public
+ * This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
@@ -34,36 +34,14 @@
#define NSLU2_PCI_INTC_PIN 9
#define NSLU2_PCI_INTD_PIN 8
-
/* NSLU2 Timer */
#define NSLU2_FREQ 66000000
-#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-
-/* GPIO */
-
-#define NSLU2_GPIO0 0
-#define NSLU2_GPIO1 1
-#define NSLU2_GPIO2 2
-#define NSLU2_GPIO3 3
-#define NSLU2_GPIO4 4
-#define NSLU2_GPIO5 5
-#define NSLU2_GPIO6 6
-#define NSLU2_GPIO7 7
-#define NSLU2_GPIO8 8
-#define NSLU2_GPIO9 9
-#define NSLU2_GPIO10 10
-#define NSLU2_GPIO11 11
-#define NSLU2_GPIO12 12
-#define NSLU2_GPIO13 13
-#define NSLU2_GPIO14 14
-#define NSLU2_GPIO15 15
/* Buttons */
-#define NSLU2_PB_GPIO NSLU2_GPIO5
-#define NSLU2_PO_GPIO NSLU2_GPIO8 /* power off */
-#define NSLU2_RB_GPIO NSLU2_GPIO12
+#define NSLU2_PB_GPIO 5
+#define NSLU2_PO_GPIO 8 /* power off */
+#define NSLU2_RB_GPIO 12
#define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5
#define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12
@@ -79,16 +57,16 @@
/* LEDs */
-#define NSLU2_LED_RED NSLU2_GPIO0
-#define NSLU2_LED_GRN NSLU2_GPIO1
+#define NSLU2_LED_RED_GPIO 0
+#define NSLU2_LED_GRN_GPIO 1
-#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED)
-#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN)
+#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED_GPIO)
+#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN_GPIO)
-#define NSLU2_LED_DISK1 NSLU2_GPIO3
-#define NSLU2_LED_DISK2 NSLU2_GPIO2
+#define NSLU2_LED_DISK1_GPIO 3
+#define NSLU2_LED_DISK2_GPIO 2
-#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2)
-#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3)
+#define NSLU2_LED_DISK1_BM (1L << NSLU2_LED_DISK1_GPIO)
+#define NSLU2_LED_DISK2_BM (1L << NSLU2_LED_DISK2_GPIO)
diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
index ab194e5f6653..2a44d3d67980 100644
--- a/include/asm-arm/arch-ixp4xx/platform.h
+++ b/include/asm-arm/arch-ixp4xx/platform.h
@@ -113,6 +113,7 @@ extern unsigned long ixp4xx_timer_freq;
extern void ixp4xx_map_io(void);
extern void ixp4xx_init_irq(void);
extern void ixp4xx_sys_init(void);
+extern void ixp4xx_timer_init(void);
extern struct sys_timer ixp4xx_timer;
extern void ixp4xx_pci_preinit(void);
struct pci_sys_data;
diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h
index 4505aefbad17..19e77f038042 100644
--- a/include/asm-arm/arch-s3c2410/map.h
+++ b/include/asm-arm/arch-s3c2410/map.h
@@ -153,6 +153,10 @@
#define S3C2440_PA_AC97 (0x5B000000)
#define S3C2440_SZ_AC97 SZ_1M
+/* S3C2443 High-speed SD/MMC */
+#define S3C2443_PA_HSMMC (0x4A800000)
+#define S3C2443_SZ_HSMMC (256)
+
/* ISA style IO, for each machine to sort out mappings for, if it
* implements it. We reserve two 16M regions for ISA.
*/
diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h
index 02131a5a1d3a..0362332faaf0 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpioj.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpioj.h
@@ -98,5 +98,9 @@
#define S3C2440_GPJ12_OUTP (0x01 << 24)
#define S3C2440_GPJ12_CAMRESET (0x02 << 24)
+#define S3C2443_GPJ13 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13)
+#define S3C2443_GPJ14 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14)
+#define S3C2443_GPJ15 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15)
+
#endif /* __ASM_ARCH_REGS_GPIOJ_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412.h b/include/asm-arm/arch-s3c2410/regs-s3c2412.h
new file mode 100644
index 000000000000..8ca6a3bc8555
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-s3c2412.h
@@ -0,0 +1,21 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412.h
+ *
+ * Copyright 2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 specific register definitions
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2412_H
+#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
+
+#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30)
+#define S3C2412_SWRST_RESET (0x533C2412)
+
+#endif /* __ASM_ARCH_REGS_S3C2412_H */
+
diff --git a/include/asm-arm/ioctls.h b/include/asm-arm/ioctls.h
index bb9a7aa10c12..a91d8a1523cf 100644
--- a/include/asm-arm/ioctls.h
+++ b/include/asm-arm/ioctls.h
@@ -46,6 +46,10 @@
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T',0x2A, struct termios2)
+#define TCSETS2 _IOW('T',0x2B, struct termios2)
+#define TCSETSW2 _IOW('T',0x2C, struct termios2)
+#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h
index fd2f9bf4dcc6..c59fad18e73b 100644
--- a/include/asm-arm/mach/arch.h
+++ b/include/asm-arm/mach/arch.h
@@ -49,7 +49,7 @@ struct machine_desc {
*/
#define MACHINE_START(_type,_name) \
static const struct machine_desc __mach_desc_##_type \
- __attribute_used__ \
+ __used \
__attribute__((__section__(".arch.info.init"))) = { \
.nr = MACH_TYPE_##_type, \
.name = _name,
diff --git a/include/asm-arm/setup.h b/include/asm-arm/setup.h
index e5407392afca..7bbf105463f1 100644
--- a/include/asm-arm/setup.h
+++ b/include/asm-arm/setup.h
@@ -185,7 +185,7 @@ struct tagtable {
#ifdef __KERNEL__
-#define __tag __attribute_used__ __attribute__((__section__(".taglist.init")))
+#define __tag __used __attribute__((__section__(".taglist.init")))
#define __tagtable(tag, fn) \
static struct tagtable __tagtable_##fn __tag = { tag, fn }
@@ -218,7 +218,7 @@ struct early_params {
};
#define __early_param(name,fn) \
-static struct early_params __early_##fn __attribute_used__ \
+static struct early_params __early_##fn __used \
__attribute__((__section__(".early_param.init"))) = { name, fn }
#endif /* __KERNEL__ */
diff --git a/include/asm-arm/termbits.h b/include/asm-arm/termbits.h
index a3f4fe1742d0..f784d11f40b5 100644
--- a/include/asm-arm/termbits.h
+++ b/include/asm-arm/termbits.h
@@ -15,6 +15,17 @@ struct termios {
cc_t c_cc[NCCS]; /* control characters */
};
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
struct ktermios {
tcflag_t c_iflag; /* input mode flags */
tcflag_t c_oflag; /* output mode flags */
@@ -128,6 +139,7 @@ struct ktermios {
#define HUPCL 0002000
#define CLOCAL 0004000
#define CBAUDEX 0010000
+#define BOTHER 0010000
#define B57600 0010001
#define B115200 0010002
#define B230400 0010003
@@ -143,10 +155,12 @@ struct ktermios {
#define B3000000 0010015
#define B3500000 0010016
#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CIBAUD 002003600000 /* input baud rate */
#define CMSPAR 010000000000 /* mark or space (stick) parity */
#define CRTSCTS 020000000000 /* flow control */
+#define IBSHIFT 16
+
/* c_lflag bits */
#define ISIG 0000001
#define ICANON 0000002
diff --git a/include/asm-arm/termios.h b/include/asm-arm/termios.h
index 329c324c4040..293e3f1bc3f2 100644
--- a/include/asm-arm/termios.h
+++ b/include/asm-arm/termios.h
@@ -82,8 +82,10 @@ struct termio {
copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
})
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
#endif /* __KERNEL__ */
diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h
index ccd0de010e81..71be4fded7e2 100644
--- a/include/asm-arm/tlbflush.h
+++ b/include/asm-arm/tlbflush.h
@@ -138,6 +138,19 @@
# define v6wbi_always_flags (-1UL)
#endif
+#ifdef CONFIG_CPU_TLB_V7
+# define v7wbi_possible_flags v6wbi_tlb_flags
+# define v7wbi_always_flags v6wbi_tlb_flags
+# ifdef _TLB
+# define MULTI_TLB 1
+# else
+# define _TLB v7wbi
+# endif
+#else
+# define v7wbi_possible_flags 0
+# define v7wbi_always_flags (-1UL)
+#endif
+
#ifndef _TLB
#error Unknown TLB model
#endif
diff --git a/include/asm-arm26/setup.h b/include/asm-arm26/setup.h
index 10fd07c76662..e82562306475 100644
--- a/include/asm-arm26/setup.h
+++ b/include/asm-arm26/setup.h
@@ -173,7 +173,7 @@ struct tagtable {
int (*parse)(const struct tag *);
};
-#define __tag __attribute_used__ __attribute__((__section__(".taglist")))
+#define __tag __used __attribute__((__section__(".taglist")))
#define __tagtable(tag, fn) \
static struct tagtable __tagtable_##fn __tag = { tag, fn }