Revert "hwmon: New driver for SMSC SCH5627"

This reverts commit 19803daeb1452d4be3442262844929126bad4978.

5 files changed, 0 insertions, 896 deletions

diff --git a/Documentation/hwmon/sch5627 b/Documentation/hwmon/sch5627
deleted file mode 100644
index 446a054e4912..000000000000
--- a/Documentation/hwmon/sch5627
+++ /dev/null
@@ -1,22 +0,0 @@
-Kernel driver sch5627
-=====================
-
-Supported chips:
-  * SMSC SCH5627
-    Prefix: 'sch5627'
-    Addresses scanned: none, address read from Super I/O config space
-    Datasheet: Application Note available upon request
-
-Author: Hans de Goede <hdegoede@redhat.com>
-
-
-Description
------------
-
-SMSC SCH5627 Super I/O chips include complete hardware monitoring
-capabilities. They can monitor up to 5 voltages, 4 fans and 8 temperatures.
-
-The hardware monitoring part of the SMSC SCH5627 is accessed by talking
-through an embedded microcontroller. An application note describing the
-protocol for communicating with the microcontroller is available upon
-request. Please mail me if you want a copy.
diff --git a/MAINTAINERS b/MAINTAINERS
index eebbbfb0fa38..2b9de57848a5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5765,13 +5765,6 @@ S:	Supported
 F:	Documentation/hwmon/emc2103
 F:	drivers/hwmon/emc2103.c
 
-SMSC SCH5627 HARDWARE MONITOR DRIVER
-M:	Hans de Goede <hdegoede@redhat.com>
-L:	lm-sensors@lm-sensors.org
-S:	Supported
-F:	Documentation/hwmon/sch5627
-F:	drivers/hwmon/sch5627.c
-
 SMSC47B397 HARDWARE MONITOR DRIVER
 M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	lm-sensors@lm-sensors.org
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 81131eda5544..898059086996 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -959,15 +959,6 @@ config SENSORS_SMSC47B397
 	  This driver can also be built as a module.  If so, the module
 	  will be called smsc47b397.
 
-config SENSORS_SCH5627
-	tristate "SMSC SCH5627"
-	help
-	  If you say yes here you get support for the hardware monitoring
-	  features of the SMSC SCH5627 Super-I/O chip.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called sch5627.
-
 config SENSORS_ADS1015
 	tristate "Texas Instruments ADS1015"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index b351e2bc4f78..01faebd87585 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -91,7 +91,6 @@ obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_S3C)	+= s3c-hwmon.o
-obj-$(CONFIG_SENSORS_SCH5627)	+= sch5627.o
 obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
 obj-$(CONFIG_SENSORS_SHT21)	+= sht21.o
 obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c
deleted file mode 100644
index 0001331f55fe..000000000000
--- a/drivers/hwmon/sch5627.c
+++ /dev/null
@@ -1,857 +0,0 @@
-/***************************************************************************
- *   Copyright (C) 2010-2011 Hans de Goede <hdegoede@redhat.com>           *
- *                                                                         *
- *   This program is free software; you can redistribute it and/or modify  *
- *   it under the terms of the GNU General Public License as published by  *
- *   the Free Software Foundation; either version 2 of the License, or     *
- *   (at your option) any later version.                                   *
- *                                                                         *
- *   This program is distributed in the hope that it will be useful,       *
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- *   GNU General Public License for more details.                          *
- *                                                                         *
- *   You should have received a copy of the GNU General Public License     *
- *   along with this program; if not, write to the                         *
- *   Free Software Foundation, Inc.,                                       *
- *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- ***************************************************************************/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/platform_device.h>
-#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/acpi.h>
-
-#define DRVNAME "sch5627"
-#define DEVNAME DRVNAME /* We only support one model */
-
-#define SIO_SCH5627_EM_LD	0x0C	/* Embedded Microcontroller LD */
-#define SIO_UNLOCK_KEY		0x55	/* Key to enable Super-I/O */
-#define SIO_LOCK_KEY		0xAA	/* Key to disable Super-I/O */
-
-#define SIO_REG_LDSEL		0x07	/* Logical device select */
-#define SIO_REG_DEVID		0x20	/* Device ID */
-#define SIO_REG_ENABLE		0x30	/* Logical device enable */
-#define SIO_REG_ADDR		0x66	/* Logical device address (2 bytes) */
-
-#define SIO_SCH5627_ID		0xC6	/* Chipset ID */
-
-#define REGION_LENGTH		9
-
-#define SCH5627_HWMON_ID		0xa5
-#define SCH5627_COMPANY_ID		0x5c
-#define SCH5627_PRIMARY_ID		0xa0
-
-#define SCH5627_REG_BUILD_CODE		0x39
-#define SCH5627_REG_BUILD_ID		0x3a
-#define SCH5627_REG_HWMON_ID		0x3c
-#define SCH5627_REG_HWMON_REV		0x3d
-#define SCH5627_REG_COMPANY_ID		0x3e
-#define SCH5627_REG_PRIMARY_ID		0x3f
-#define SCH5627_REG_CTRL		0x40
-
-#define SCH5627_NO_TEMPS		8
-#define SCH5627_NO_FANS			4
-#define SCH5627_NO_IN			5
-
-static const u16 SCH5627_REG_TEMP_MSB[SCH5627_NO_TEMPS] = {
-	0x2B, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x180, 0x181 };
-static const u16 SCH5627_REG_TEMP_LSN[SCH5627_NO_TEMPS] = {
-	0xE2, 0xE1, 0xE1, 0xE5, 0xE5, 0xE6, 0x182, 0x182 };
-static const u16 SCH5627_REG_TEMP_HIGH_NIBBLE[SCH5627_NO_TEMPS] = {
-	0, 0, 1, 1, 0, 0, 0, 1 };
-static const u16 SCH5627_REG_TEMP_HIGH[SCH5627_NO_TEMPS] = {
-	0x61, 0x57, 0x59, 0x5B, 0x5D, 0x5F, 0x184, 0x186 };
-static const u16 SCH5627_REG_TEMP_ABS[SCH5627_NO_TEMPS] = {
-	0x9B, 0x96, 0x97, 0x98, 0x99, 0x9A, 0x1A8, 0x1A9 };
-
-static const u16 SCH5627_REG_FAN[SCH5627_NO_FANS] = {
-	0x2C, 0x2E, 0x30, 0x32 };
-static const u16 SCH5627_REG_FAN_MIN[SCH5627_NO_FANS] = {
-	0x62, 0x64, 0x66, 0x68 };
-
-static const u16 SCH5627_REG_IN_MSB[SCH5627_NO_IN] = {
-	0x22, 0x23, 0x24, 0x25, 0x189 };
-static const u16 SCH5627_REG_IN_LSN[SCH5627_NO_IN] = {
-	0xE4, 0xE4, 0xE3, 0xE3, 0x18A };
-static const u16 SCH5627_REG_IN_HIGH_NIBBLE[SCH5627_NO_IN] = {
-	1, 0, 1, 0, 1 };
-static const u16 SCH5627_REG_IN_FACTOR[SCH5627_NO_IN] = {
-	10745, 3660, 9765, 10745, 3660 };
-static const char * const SCH5627_IN_LABELS[SCH5627_NO_IN] = {
-	"VCC", "VTT", "VBAT", "VTR", "V_IN" };
-
-struct sch5627_data {
-	unsigned short addr;
-	struct device *hwmon_dev;
-	u8 temp_max[SCH5627_NO_TEMPS];
-	u8 temp_crit[SCH5627_NO_TEMPS];
-	u16 fan_min[SCH5627_NO_FANS];
-
-	struct mutex update_lock;
-	char valid;			/* !=0 if following fields are valid */
-	unsigned long last_updated;	/* In jiffies */
-	u16 temp[SCH5627_NO_TEMPS];
-	u16 fan[SCH5627_NO_FANS];
-	u16 in[SCH5627_NO_IN];
-};
-
-static struct platform_device *sch5627_pdev;
-
-/* Super I/O functions */
-static inline int superio_inb(int base, int reg)
-{
-	outb(reg, base);
-	return inb(base + 1);
-}
-
-static inline int superio_enter(int base)
-{
-	/* Don't step on other drivers' I/O space by accident */
-	if (!request_muxed_region(base, 2, DRVNAME)) {
-		pr_err("I/O address 0x%04x already in use\n", base);
-		return -EBUSY;
-	}
-
-	outb(SIO_UNLOCK_KEY, base);
-
-	return 0;
-}
-
-static inline void superio_select(int base, int ld)
-{
-	outb(SIO_REG_LDSEL, base);
-	outb(ld, base + 1);
-}
-
-static inline void superio_exit(int base)
-{
-	outb(SIO_LOCK_KEY, base);
-	release_region(base, 2);
-}
-
-static int sch5627_read_virtual_reg(struct sch5627_data *data, u16 reg)
-{
-	u8 val;
-	int i;
-	/*
-	 * According to SMSC for the commands we use the maximum time for
-	 * the EM to respond is 15 ms, but testing shows in practice it
-	 * responds within 15-32 reads, so we first busy poll, and if
-	 * that fails sleep a bit and try again until we are way past
-	 * the 15 ms maximum response time.
-	 */
-	const int max_busy_polls = 64;
-	const int max_lazy_polls = 32;
-
-	/* (Optional) Write-Clear the EC to Host Mailbox Register */
-	val = inb(data->addr + 1);
-	outb(val, data->addr + 1);
-
-	/* Set Mailbox Address Pointer to first location in Region 1 */
-	outb(0x00, data->addr + 2);
-	outb(0x80, data->addr + 3);
-
-	/* Write Request Packet Header */
-	outb(0x02, data->addr + 4); /* Access Type: VREG read */
-	outb(0x01, data->addr + 5); /* # of Entries: 1 Byte (8-bit) */
-	outb(0x04, data->addr + 2); /* Mailbox AP to first data entry loc. */
-
-	/* Write Address field */
-	outb(reg & 0xff, data->addr + 6);
-	outb(reg >> 8, data->addr + 7);
-
-	/* Execute the Random Access Command */
-	outb(0x01, data->addr); /* Write 01h to the Host-to-EC register */
-
-	/* EM Interface Polling "Algorithm" */
-	for (i = 0; i < max_busy_polls + max_lazy_polls; i++) {
-		if (i >= max_busy_polls)
-			msleep(1);
-		/* Read Interrupt source Register */
-		val = inb(data->addr + 8);
-		/* Write Clear the interrupt source bits */
-		if (val)
-			outb(val, data->addr + 8);
-		/* Command Completed ? */
-		if (val & 0x01)
-			break;
-	}
-	if (i == max_busy_polls + max_lazy_polls) {
-		pr_err("Max retries exceeded reading virtual "
-		       "register 0x%04hx (%d)\n", reg, 1);
-		return -EIO;
-	}
-
-	/*
-	 * According to SMSC we may need to retry this, but sofar I've always
-	 * seen this succeed in 1 try.
-	 */
-	for (i = 0; i < max_busy_polls; i++) {
-		/* Read EC-to-Host Register */
-		val = inb(data->addr + 1);
-		/* Command Completed ? */
-		if (val == 0x01)
-			break;
-
-		if (i == 0)
-			pr_warn("EC reports: 0x%02x reading virtual register "
-				"0x%04hx\n", (unsigned int)val, reg);
-	}
-	if (i == max_busy_polls) {
-		pr_err("Max retries exceeded reading virtual "
-		       "register 0x%04hx (%d)\n", reg, 2);
-		return -EIO;
-	}
-
-	/*
-	 * According to the SMSC app note we should now do:
-	 *
-	 * Set Mailbox Address Pointer to first location in Region 1 *
-	 * outb(0x00, data->addr + 2);
-	 * outb(0x80, data->addr + 3);
-	 *
-	 * But if we do that things don't work, so let's not.
-	 */
-
-	/* Read Data from Mailbox */
-	return inb(data->addr + 4);
-}
-
-static int sch5627_read_virtual_reg16(struct sch5627_data *data, u16 reg)
-{
-	int lsb, msb;
-
-	/* Read LSB first, this will cause the matching MSB to be latched */
-	lsb = sch5627_read_virtual_reg(data, reg);
-	if (lsb < 0)
-		return lsb;
-
-	msb = sch5627_read_virtual_reg(data, reg + 1);
-	if (msb < 0)
-		return msb;
-
-	return lsb | (msb << 8);
-}
-
-static int sch5627_read_virtual_reg12(struct sch5627_data *data, u16 msb_reg,
-				      u16 lsn_reg, int high_nibble)
-{
-	int msb, lsn;
-
-	/* Read MSB first, this will cause the matching LSN to be latched */
-	msb = sch5627_read_virtual_reg(data, msb_reg);
-	if (msb < 0)
-		return msb;
-
-	lsn = sch5627_read_virtual_reg(data, lsn_reg);
-	if (lsn < 0)
-		return lsn;
-
-	if (high_nibble)
-		return (msb << 4) | (lsn >> 4);
-	else
-		return (msb << 4) | (lsn & 0x0f);
-}
-
-static struct sch5627_data *sch5627_update_device(struct device *dev)
-{
-	struct sch5627_data *data = dev_get_drvdata(dev);
-	struct sch5627_data *ret = data;
-	int i, val;
-
-	mutex_lock(&data->update_lock);
-
-	/* Cache the values for 1 second */
-	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
-		for (i = 0; i < SCH5627_NO_TEMPS; i++) {
-			val = sch5627_read_virtual_reg12(data,
-				SCH5627_REG_TEMP_MSB[i],
-				SCH5627_REG_TEMP_LSN[i],
-				SCH5627_REG_TEMP_HIGH_NIBBLE[i]);
-			if (unlikely(val < 0)) {
-				ret = ERR_PTR(val);
-				goto abort;
-			}
-			data->temp[i] = val;
-		}
-
-		for (i = 0; i < SCH5627_NO_FANS; i++) {
-			val = sch5627_read_virtual_reg16(data,
-							 SCH5627_REG_FAN[i]);
-			if (unlikely(val < 0)) {
-				ret = ERR_PTR(val);
-				goto abort;
-			}
-			data->fan[i] = val;
-		}
-
-		for (i = 0; i < SCH5627_NO_IN; i++) {
-			val = sch5627_read_virtual_reg12(data,
-				SCH5627_REG_IN_MSB[i],
-				SCH5627_REG_IN_LSN[i],
-				SCH5627_REG_IN_HIGH_NIBBLE[i]);
-			if (unlikely(val < 0)) {
-				ret = ERR_PTR(val);
-				goto abort;
-			}
-			data->in[i] = val;
-		}
-
-		data->last_updated = jiffies;
-		data->valid = 1;
-	}
-abort:
-	mutex_unlock(&data->update_lock);
-	return ret;
-}
-
-static int __devinit sch5627_read_limits(struct sch5627_data *data)
-{
-	int i, val;
-
-	for (i = 0; i < SCH5627_NO_TEMPS; i++) {
-		/*
-		 * Note what SMSC calls ABS, is what lm_sensors calls max
-		 * (aka high), and HIGH is what lm_sensors calls crit.
-		 */
-		val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_ABS[i]);
-		if (val < 0)
-			return val;
-		data->temp_max[i] = val;
-
-		val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_HIGH[i]);
-		if (val < 0)
-			return val;
-		data->temp_crit[i] = val;
-	}
-	for (i = 0; i < SCH5627_NO_FANS; i++) {
-		val = sch5627_read_virtual_reg16(data, SCH5627_REG_FAN_MIN[i]);
-		if (val < 0)
-			return val;
-		data->fan_min[i] = val;
-	}
-
-	return 0;
-}
-
-static int reg_to_temp(u16 reg)
-{
-	return (reg * 625) / 10 - 64000;
-}
-
-static int reg_to_temp_limit(u8 reg)
-{
-	return (reg - 64) * 1000;
-}
-
-static int reg_to_rpm(u16 reg)
-{
-	if (reg == 0)
-		return -EIO;
-	if (reg == 0xffff)
-		return 0;
-
-	return 5400540 / reg;
-}
-
-static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
-	char *buf)
-{
-	return snprintf(buf, PAGE_SIZE, "%s\n", DEVNAME);
-}
-
-static ssize_t show_temp(struct device *dev, struct device_attribute
-	*devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct sch5627_data *data = sch5627_update_device(dev);
-	int val;
-
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-
-	val = reg_to_temp(data->temp[attr->index]);
-	return snprintf(buf, PAGE_SIZE, "%d\n", val);
-}
-
-static ssize_t show_temp_fault(struct device *dev, struct device_attribute
-	*devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct sch5627_data *data = sch5627_update_device(dev);
-
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", data->temp[attr->index] == 0);
-}
-
-static ssize_t show_temp_max(struct device *dev, struct device_attribute
-	*devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct sch5627_data *data = dev_get_drvdata(dev);
-	int val;
-
-	val = reg_to_temp_limit(data->temp_max[attr->index]);
-	return snprintf(buf, PAGE_SIZE, "%d\n", val);
-}
-
-static ssize_t show_temp_crit(struct device *dev, struct device_attribute
-	*devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct sch5627_data *data = dev_get_drvdata(dev);
-	int val;
-
-	val = reg_to_temp_limit(data->temp_crit[attr->index]);
-	return snprintf(buf, PAGE_SIZE, "%d\n", val);
-}
-
-static ssize_t show_fan(struct device *dev, struct device_attribute
-	*devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct sch5627_data *data = sch5627_update_device(dev);
-	int val;
-
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-
-	val = reg_to_rpm(data->fan[attr->index]);
-	if (val < 0)
-		return val;
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", val);
-}
-
-static ssize_t show_fan_fault(struct device *dev, struct device_attribute
-	*devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct sch5627_data *data = sch5627_update_device(dev);
-
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n",
-			data->fan[attr->index] == 0xffff);
-}
-
-static ssize_t show_fan_min(struct device *dev, struct device_attribute
-	*devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct sch5627_data *data = dev_get_drvdata(dev);
-	int val = reg_to_rpm(data->fan_min[attr->index]);
-	if (val < 0)
-		return val;
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", val);
-}
-
-static ssize_t show_in(struct device *dev, struct device_attribute
-	*devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct sch5627_data *data = sch5627_update_device(dev);
-	int val;
-
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-
-	val = DIV_ROUND_CLOSEST(
-		data->in[attr->index] * SCH5627_REG_IN_FACTOR[attr->index],
-		10000);
-	return snprintf(buf, PAGE_SIZE, "%d\n", val);
-}
-
-static ssize_t show_in_label(struct device *dev, struct device_attribute
-	*devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-
-	return snprintf(buf, PAGE_SIZE, "%s\n",
-			SCH5627_IN_LABELS[attr->index]);
-}
-
-static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
-static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
-static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4);
-static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_temp, NULL, 5);
-static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, show_temp, NULL, 6);
-static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7);
-static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_temp_fault, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_temp_fault, NULL, 2);
-static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_temp_fault, NULL, 3);
-static SENSOR_DEVICE_ATTR(temp5_fault, S_IRUGO, show_temp_fault, NULL, 4);
-static SENSOR_DEVICE_ATTR(temp6_fault, S_IRUGO, show_temp_fault, NULL, 5);
-static SENSOR_DEVICE_ATTR(temp7_fault, S_IRUGO, show_temp_fault, NULL, 6);
-static SENSOR_DEVICE_ATTR(temp8_fault, S_IRUGO, show_temp_fault, NULL, 7);
-static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp_max, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp_max, NULL, 2);
-static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO, show_temp_max, NULL, 3);
-static SENSOR_DEVICE_ATTR(temp5_max, S_IRUGO, show_temp_max, NULL, 4);
-static SENSOR_DEVICE_ATTR(temp6_max, S_IRUGO, show_temp_max, NULL, 5);
-static SENSOR_DEVICE_ATTR(temp7_max, S_IRUGO, show_temp_max, NULL, 6);
-static SENSOR_DEVICE_ATTR(temp8_max, S_IRUGO, show_temp_max, NULL, 7);
-static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0);
-static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit, NULL, 1);
-static SENSOR_DEVICE_ATTR(temp3_crit, S_IRUGO, show_temp_crit, NULL, 2);
-static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp_crit, NULL, 3);
-static SENSOR_DEVICE_ATTR(temp5_crit, S_IRUGO, show_temp_crit, NULL, 4);
-static SENSOR_DEVICE_ATTR(temp6_crit, S_IRUGO, show_temp_crit, NULL, 5);
-static SENSOR_DEVICE_ATTR(temp7_crit, S_IRUGO, show_temp_crit, NULL, 6);
-static SENSOR_DEVICE_ATTR(temp8_crit, S_IRUGO, show_temp_crit, NULL, 7);
-
-static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
-static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
-static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
-static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
-static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault, NULL, 0);
-static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_fan_fault, NULL, 1);
-static SENSOR_DEVICE_ATTR(fan3_fault, S_IRUGO, show_fan_fault, NULL, 2);
-static SENSOR_DEVICE_ATTR(fan4_fault, S_IRUGO, show_fan_fault, NULL, 3);
-static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO, show_fan_min, NULL, 0);
-static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO, show_fan_min, NULL, 1);
-static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO, show_fan_min, NULL, 2);
-static SENSOR_DEVICE_ATTR(fan4_min, S_IRUGO, show_fan_min, NULL, 3);
-
-static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0);
-static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
-static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2);
-static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3);
-static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 4);
-static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_in_label, NULL, 0);
-static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_in_label, NULL, 1);
-static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_in_label, NULL, 2);
-static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_in_label, NULL, 3);
-
-static struct attribute *sch5627_attributes[] = {
-	&dev_attr_name.attr,
-
-	&sensor_dev_attr_temp1_input.dev_attr.attr,
-	&sensor_dev_attr_temp2_input.dev_attr.attr,
-	&sensor_dev_attr_temp3_input.dev_attr.attr,
-	&sensor_dev_attr_temp4_input.dev_attr.attr,
-	&sensor_dev_attr_temp5_input.dev_attr.attr,
-	&sensor_dev_attr_temp6_input.dev_attr.attr,
-	&sensor_dev_attr_temp7_input.dev_attr.attr,
-	&sensor_dev_attr_temp8_input.dev_attr.attr,
-	&sensor_dev_attr_temp1_fault.dev_attr.attr,
-	&sensor_dev_attr_temp2_fault.dev_attr.attr,
-	&sensor_dev_attr_temp3_fault.dev_attr.attr,
-	&sensor_dev_attr_temp4_fault.dev_attr.attr,
-	&sensor_dev_attr_temp5_fault.dev_attr.attr,
-	&sensor_dev_attr_temp6_fault.dev_attr.attr,
-	&sensor_dev_attr_temp7_fault.dev_attr.attr,
-	&sensor_dev_attr_temp8_fault.dev_attr.attr,
-	&sensor_dev_attr_temp1_max.dev_attr.attr,
-	&sensor_dev_attr_temp2_max.dev_attr.attr,
-	&sensor_dev_attr_temp3_max.dev_attr.attr,
-	&sensor_dev_attr_temp4_max.dev_attr.attr,
-	&sensor_dev_attr_temp5_max.dev_attr.attr,
-	&sensor_dev_attr_temp6_max.dev_attr.attr,
-	&sensor_dev_attr_temp7_max.dev_attr.attr,
-	&sensor_dev_attr_temp8_max.dev_attr.attr,
-	&sensor_dev_attr_temp1_crit.dev_attr.attr,
-	&sensor_dev_attr_temp2_crit.dev_attr.attr,
-	&sensor_dev_attr_temp3_crit.dev_attr.attr,
-	&sensor_dev_attr_temp4_crit.dev_attr.attr,
-	&sensor_dev_attr_temp5_crit.dev_attr.attr,
-	&sensor_dev_attr_temp6_crit.dev_attr.attr,
-	&sensor_dev_attr_temp7_crit.dev_attr.attr,
-	&sensor_dev_attr_temp8_crit.dev_attr.attr,
-
-	&sensor_dev_attr_fan1_input.dev_attr.attr,
-	&sensor_dev_attr_fan2_input.dev_attr.attr,
-	&sensor_dev_attr_fan3_input.dev_attr.attr,
-	&sensor_dev_attr_fan4_input.dev_attr.attr,
-	&sensor_dev_attr_fan1_fault.dev_attr.attr,
-	&sensor_dev_attr_fan2_fault.dev_attr.attr,
-	&sensor_dev_attr_fan3_fault.dev_attr.attr,
-	&sensor_dev_attr_fan4_fault.dev_attr.attr,
-	&sensor_dev_attr_fan1_min.dev_attr.attr,
-	&sensor_dev_attr_fan2_min.dev_attr.attr,
-	&sensor_dev_attr_fan3_min.dev_attr.attr,
-	&sensor_dev_attr_fan4_min.dev_attr.attr,
-
-	&sensor_dev_attr_in0_input.dev_attr.attr,
-	&sensor_dev_attr_in1_input.dev_attr.attr,
-	&sensor_dev_attr_in2_input.dev_attr.attr,
-	&sensor_dev_attr_in3_input.dev_attr.attr,
-	&sensor_dev_attr_in4_input.dev_attr.attr,
-	&sensor_dev_attr_in0_label.dev_attr.attr,
-	&sensor_dev_attr_in1_label.dev_attr.attr,
-	&sensor_dev_attr_in2_label.dev_attr.attr,
-	&sensor_dev_attr_in3_label.dev_attr.attr,
-	/* No in4_label as in4 is a generic input pin */
-
-	NULL
-};
-
-static const struct attribute_group sch5627_group = {
-	.attrs = sch5627_attributes,
-};
-
-static int sch5627_remove(struct platform_device *pdev)
-{
-	struct sch5627_data *data = platform_get_drvdata(pdev);
-
-	if (data->hwmon_dev)
-		hwmon_device_unregister(data->hwmon_dev);
-
-	sysfs_remove_group(&pdev->dev.kobj, &sch5627_group);
-	platform_set_drvdata(pdev, NULL);
-	kfree(data);
-
-	return 0;
-}
-
-static int __devinit sch5627_probe(struct platform_device *pdev)
-{
-	struct sch5627_data *data;
-	int err, build_code, build_id, hwmon_rev, val;
-
-	data = kzalloc(sizeof(struct sch5627_data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
-	mutex_init(&data->update_lock);
-	platform_set_drvdata(pdev, data);
-
-	val = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_ID);
-	if (val < 0) {
-		err = val;
-		goto error;
-	}
-	if (val != SCH5627_HWMON_ID) {
-		pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "hwmon",
-		       val, SCH5627_HWMON_ID);
-		err = -ENODEV;
-		goto error;
-	}
-
-	val = sch5627_read_virtual_reg(data, SCH5627_REG_COMPANY_ID);
-	if (val < 0) {
-		err = val;
-		goto error;
-	}
-	if (val != SCH5627_COMPANY_ID) {
-		pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "company",
-		       val, SCH5627_COMPANY_ID);
-		err = -ENODEV;
-		goto error;
-	}
-
-	val = sch5627_read_virtual_reg(data, SCH5627_REG_PRIMARY_ID);
-	if (val < 0) {
-		err = val;
-		goto error;
-	}
-	if (val != SCH5627_PRIMARY_ID) {
-		pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "primary",
-		       val, SCH5627_PRIMARY_ID);
-		err = -ENODEV;
-		goto error;
-	}
-
-	build_code = sch5627_read_virtual_reg(data, SCH5627_REG_BUILD_CODE);
-	if (build_code < 0) {
-		err = build_code;
-		goto error;
-	}
-
-	build_id = sch5627_read_virtual_reg16(data, SCH5627_REG_BUILD_ID);
-	if (build_id < 0) {
-		err = build_id;
-		goto error;
-	}
-
-	hwmon_rev = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_REV);
-	if (hwmon_rev < 0) {
-		err = hwmon_rev;
-		goto error;
-	}
-
-	val = sch5627_read_virtual_reg(data, SCH5627_REG_CTRL);
-	if (val < 0) {
-		err = val;
-		goto error;
-	}
-	if (!(val & 0x01)) {
-		pr_err("hardware monitoring not enabled\n");
-		err = -ENODEV;
-		goto error;
-	}
-
-	/*
-	 * Read limits, we do this only once as reading a register on
-	 * the sch5627 is quite expensive (and they don't change).
-	 */
-	err = sch5627_read_limits(data);
-	if (err)
-		goto error;
-
-	pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n",
-		build_code, build_id, hwmon_rev);
-
-	/* Register sysfs interface files */
-	err = sysfs_create_group(&pdev->dev.kobj, &sch5627_group);
-	if (err)
-		goto error;
-
-	data->hwmon_dev = hwmon_device_register(&pdev->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		data->hwmon_dev = NULL;
-		goto error;
-	}
-
-	return 0;
-
-error:
-	sch5627_remove(pdev);
-	return err;
-}
-
-static int __init sch5627_find(int sioaddr, unsigned short *address)
-{
-	u8 devid;
-	int err = superio_enter(sioaddr);
-	if (err)
-		return err;
-
-	devid = superio_inb(sioaddr, SIO_REG_DEVID);
-	if (devid != SIO_SCH5627_ID) {
-		pr_debug("Unsupported device id: 0x%02x\n",
-			 (unsigned int)devid);
-		err = -ENODEV;
-		goto exit;
-	}
-
-	superio_select(sioaddr, SIO_SCH5627_EM_LD);
-
-	if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
-		pr_warn("Device not activated\n");
-		err = -ENODEV;
-		goto exit;
-	}
-
-	/*
-	 * Warning the order of the low / high byte is the other way around
-	 * as on most other superio devices!!
-	 */
-	*address = superio_inb(sioaddr, SIO_REG_ADDR) |
-		   superio_inb(sioaddr, SIO_REG_ADDR + 1) << 8;
-	if (*address == 0) {
-		pr_warn("Base address not set\n");
-		err = -ENODEV;
-		goto exit;
-	}
-
-	pr_info("Found %s chip at %#hx\n", DEVNAME, *address);
-exit:
-	superio_exit(sioaddr);
-	return err;
-}
-
-static int __init sch5627_device_add(unsigned short address)
-{
-	struct resource res = {
-		.start	= address,
-		.end	= address + REGION_LENGTH - 1,
-		.flags	= IORESOURCE_IO,
-	};
-	int err;
-
-	sch5627_pdev = platform_device_alloc(DRVNAME, address);
-	if (!sch5627_pdev)
-		return -ENOMEM;
-
-	res.name = sch5627_pdev->name;
-	err = acpi_check_resource_conflict(&res);
-	if (err)
-		goto exit_device_put;
-
-	err = platform_device_add_resources(sch5627_pdev, &res, 1);
-	if (err) {
-		pr_err("Device resource addition failed\n");
-		goto exit_device_put;
-	}
-
-	err = platform_device_add(sch5627_pdev);
-	if (err) {
-		pr_err("Device addition failed\n");
-		goto exit_device_put;
-	}
-
-	return 0;
-
-exit_device_put:
-	platform_device_put(sch5627_pdev);
-
-	return err;
-}
-
-static struct platform_driver sch5627_driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= DRVNAME,
-	},
-	.probe		= sch5627_probe,
-	.remove		= sch5627_remove,
-};
-
-static int __init sch5627_init(void)
-{
-	int err = -ENODEV;
-	unsigned short address;
-
-	if (sch5627_find(0x4e, &address) && sch5627_find(0x2e, &address))
-		goto exit;
-
-	err = platform_driver_register(&sch5627_driver);
-	if (err)
-		goto exit;
-
-	err = sch5627_device_add(address);
-	if (err)
-		goto exit_driver;
-
-	return 0;
-
-exit_driver:
-	platform_driver_unregister(&sch5627_driver);
-exit:
-	return err;
-}
-
-static void __exit sch5627_exit(void)
-{
-	platform_device_unregister(sch5627_pdev);
-	platform_driver_unregister(&sch5627_driver);
-}
-
-MODULE_DESCRIPTION("SMSC SCH5627 Hardware Monitoring Driver");
-MODULE_AUTHOR("Hans de Goede (hdegoede@redhat.com)");
-MODULE_LICENSE("GPL");
-
-module_init(sch5627_init);
-module_exit(sch5627_exit);