summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJames Bottomley <James.Bottomley@HansenPartnership.com>2016-01-13 16:29:30 -0800
committerJames Bottomley <James.Bottomley@HansenPartnership.com>2016-01-13 16:29:30 -0800
commit60539fa3a1e3caf458a943b1a14154e3fa44d0d1 (patch)
tree9bca5f667844338ed877cb8b1684c9f661a003c3
parentabaee091a18c19ccd86feb1c8374585d82e96777 (diff)
parenta290dd57926cb0c54eec7ea506885119e296b755 (diff)
Merge remote-tracking branch 'mkp-scsi/4.5/scsi-queue' into misc
-rw-r--r--drivers/scsi/3w-xxxx.c3
-rw-r--r--drivers/scsi/Kconfig17
-rw-r--r--drivers/scsi/NCR5380.c2868
-rw-r--r--drivers/scsi/NCR5380.h87
-rw-r--r--drivers/scsi/arm/cumana_1.c31
-rw-r--r--drivers/scsi/arm/oak.c27
-rw-r--r--drivers/scsi/atari_NCR5380.c2266
-rw-r--r--drivers/scsi/atari_scsi.c102
-rw-r--r--drivers/scsi/cxgbi/cxgb3i/cxgb3i.c2
-rw-r--r--drivers/scsi/dmx3191d.c33
-rw-r--r--drivers/scsi/dtc.c115
-rw-r--r--drivers/scsi/dtc.h45
-rw-r--r--drivers/scsi/g_NCR5380.c408
-rw-r--r--drivers/scsi/g_NCR5380.h66
-rw-r--r--drivers/scsi/hisi_sas/hisi_sas_v1_hw.c40
-rw-r--r--drivers/scsi/imm.c50
-rw-r--r--drivers/scsi/ipr.c5
-rw-r--r--drivers/scsi/mac_scsi.c117
-rw-r--r--drivers/scsi/megaraid/megaraid_mm.c4
-rw-r--r--drivers/scsi/pas16.c116
-rw-r--r--drivers/scsi/pas16.h40
-rw-r--r--drivers/scsi/scsi_devinfo.c1
-rw-r--r--drivers/scsi/storvsc_drv.c2
-rw-r--r--drivers/scsi/sun3_scsi.c141
-rw-r--r--drivers/scsi/t128.c102
-rw-r--r--drivers/scsi/t128.h39
26 files changed, 3009 insertions, 3718 deletions
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index 2940bd769936..25aba1613e21 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -1045,6 +1045,9 @@ static int tw_chrdev_open(struct inode *inode, struct file *file)
static const struct file_operations tw_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = tw_chrdev_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = tw_chrdev_ioctl,
+#endif
.open = tw_chrdev_open,
.release = NULL,
.llseek = noop_llseek,
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index c1fe0d2f90ca..23d862dfdde3 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1620,23 +1620,6 @@ config ATARI_SCSI
ST-DMA, replacing ACSI). It does NOT support other schemes, like
in the Hades (without DMA).
-config ATARI_SCSI_TOSHIBA_DELAY
- bool "Long delays for Toshiba CD-ROMs"
- depends on ATARI_SCSI
- help
- This option increases the delay after a SCSI arbitration to
- accommodate some flaky Toshiba CD-ROM drives. Say Y if you intend to
- use a Toshiba CD-ROM drive; otherwise, the option is not needed and
- would impact performance a bit, so say N.
-
-config ATARI_SCSI_RESET_BOOT
- bool "Reset SCSI-devices at boottime"
- depends on ATARI_SCSI
- help
- Reset the devices on your Atari whenever it boots. This makes the
- boot process fractionally longer but may assist recovery from errors
- that leave the devices with SCSI operations partway completed.
-
config MAC_SCSI
tristate "Macintosh NCR5380 SCSI"
depends on MAC && SCSI=y
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index a777e5c412df..d72867257346 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -1,17 +1,17 @@
-/*
+/*
* NCR 5380 generic driver routines. These should make it *trivial*
- * to implement 5380 SCSI drivers under Linux with a non-trantor
- * architecture.
+ * to implement 5380 SCSI drivers under Linux with a non-trantor
+ * architecture.
*
- * Note that these routines also work with NR53c400 family chips.
+ * Note that these routines also work with NR53c400 family chips.
*
* Copyright 1993, Drew Eckhardt
- * Visionary Computing
- * (Unix and Linux consulting and custom programming)
- * drew@colorado.edu
- * +1 (303) 666-5836
+ * Visionary Computing
+ * (Unix and Linux consulting and custom programming)
+ * drew@colorado.edu
+ * +1 (303) 666-5836
*
- * For more information, please consult
+ * For more information, please consult
*
* NCR 5380 Family
* SCSI Protocol Controller
@@ -25,84 +25,28 @@
*/
/*
- * Revision 1.10 1998/9/2 Alan Cox
- * (alan@lxorguk.ukuu.org.uk)
- * Fixed up the timer lockups reported so far. Things still suck. Looking
- * forward to 2.3 and per device request queues. Then it'll be possible to
- * SMP thread this beast and improve life no end.
-
- * Revision 1.9 1997/7/27 Ronald van Cuijlenborg
- * (ronald.van.cuijlenborg@tip.nl or nutty@dds.nl)
- * (hopefully) fixed and enhanced USLEEP
- * added support for DTC3181E card (for Mustek scanner)
- *
-
- * Revision 1.8 Ingmar Baumgart
- * (ingmar@gonzo.schwaben.de)
- * added support for NCR53C400a card
- *
-
- * Revision 1.7 1996/3/2 Ray Van Tassle (rayvt@comm.mot.com)
- * added proc_info
- * added support needed for DTC 3180/3280
- * fixed a couple of bugs
- *
-
- * Revision 1.5 1994/01/19 09:14:57 drew
- * Fixed udelay() hack that was being used on DATAOUT phases
- * instead of a proper wait for the final handshake.
- *
- * Revision 1.4 1994/01/19 06:44:25 drew
- * *** empty log message ***
- *
- * Revision 1.3 1994/01/19 05:24:40 drew
- * Added support for TCR LAST_BYTE_SENT bit.
- *
- * Revision 1.2 1994/01/15 06:14:11 drew
- * REAL DMA support, bug fixes.
- *
- * Revision 1.1 1994/01/15 06:00:54 drew
- * Initial revision
- *
+ * With contributions from Ray Van Tassle, Ingmar Baumgart,
+ * Ronald van Cuijlenborg, Alan Cox and others.
*/
/*
- * Further development / testing that should be done :
+ * Further development / testing that should be done :
* 1. Cleanup the NCR5380_transfer_dma function and DMA operation complete
- * code so that everything does the same thing that's done at the
- * end of a pseudo-DMA read operation.
+ * code so that everything does the same thing that's done at the
+ * end of a pseudo-DMA read operation.
*
* 2. Fix REAL_DMA (interrupt driven, polled works fine) -
- * basically, transfer size needs to be reduced by one
- * and the last byte read as is done with PSEUDO_DMA.
- *
- * 4. Test SCSI-II tagged queueing (I have no devices which support
- * tagged queueing)
- *
- * 5. Test linked command handling code after Eric is ready with
- * the high level code.
+ * basically, transfer size needs to be reduced by one
+ * and the last byte read as is done with PSEUDO_DMA.
+ *
+ * 4. Test SCSI-II tagged queueing (I have no devices which support
+ * tagged queueing)
*/
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_transport_spi.h>
-
-#if (NDEBUG & NDEBUG_LISTS)
-#define LIST(x,y) {printk("LINE:%d Adding %p to %p\n", __LINE__, (void*)(x), (void*)(y)); if ((x)==(y)) udelay(5); }
-#define REMOVE(w,x,y,z) {printk("LINE:%d Removing: %p->%p %p->%p \n", __LINE__, (void*)(w), (void*)(x), (void*)(y), (void*)(z)); if ((x)==(y)) udelay(5); }
-#else
-#define LIST(x,y)
-#define REMOVE(w,x,y,z)
-#endif
#ifndef notyet
-#undef LINKED
#undef REAL_DMA
#endif
-#ifdef REAL_DMA_POLL
-#undef READ_OVERRUNS
-#define READ_OVERRUNS
-#endif
-
#ifdef BOARD_REQUIRES_NO_DELAY
#define io_recovery_delay(x)
#else
@@ -112,44 +56,28 @@
/*
* Design
*
- * This is a generic 5380 driver. To use it on a different platform,
+ * This is a generic 5380 driver. To use it on a different platform,
* one simply writes appropriate system specific macros (ie, data
- * transfer - some PC's will use the I/O bus, 68K's must use
+ * transfer - some PC's will use the I/O bus, 68K's must use
* memory mapped) and drops this file in their 'C' wrapper.
*
- * (Note from hch: unfortunately it was not enough for the different
- * m68k folks and instead of improving this driver they copied it
- * and hacked it up for their needs. As a consequence they lost
- * most updates to this driver. Maybe someone will fix all these
- * drivers to use a common core one day..)
- *
- * As far as command queueing, two queues are maintained for
+ * As far as command queueing, two queues are maintained for
* each 5380 in the system - commands that haven't been issued yet,
- * and commands that are currently executing. This means that an
- * unlimited number of commands may be queued, letting
- * more commands propagate from the higher driver levels giving higher
- * throughput. Note that both I_T_L and I_T_L_Q nexuses are supported,
- * allowing multiple commands to propagate all the way to a SCSI-II device
+ * and commands that are currently executing. This means that an
+ * unlimited number of commands may be queued, letting
+ * more commands propagate from the higher driver levels giving higher
+ * throughput. Note that both I_T_L and I_T_L_Q nexuses are supported,
+ * allowing multiple commands to propagate all the way to a SCSI-II device
* while a command is already executing.
*
*
- * Issues specific to the NCR5380 :
+ * Issues specific to the NCR5380 :
*
- * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead
- * piece of hardware that requires you to sit in a loop polling for
- * the REQ signal as long as you are connected. Some devices are
- * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect
- * while doing long seek operations.
- *
- * The workaround for this is to keep track of devices that have
- * disconnected. If the device hasn't disconnected, for commands that
- * should disconnect, we do something like
- *
- * while (!REQ is asserted) { sleep for N usecs; poll for M usecs }
- *
- * Some tweaking of N and M needs to be done. An algorithm based
- * on "time to data" would give the best results as long as short time
- * to datas (ie, on the same track) were considered, however these
+ * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead
+ * piece of hardware that requires you to sit in a loop polling for
+ * the REQ signal as long as you are connected. Some devices are
+ * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect
+ * while doing long seek operations. [...] These
* broken devices are the exception rather than the rule and I'd rather
* spend my time optimizing for the normal case.
*
@@ -159,23 +87,23 @@
* which is started from a workqueue for each NCR5380 host in the
* system. It attempts to establish I_T_L or I_T_L_Q nexuses by
* removing the commands from the issue queue and calling
- * NCR5380_select() if a nexus is not established.
+ * NCR5380_select() if a nexus is not established.
*
* Once a nexus is established, the NCR5380_information_transfer()
* phase goes through the various phases as instructed by the target.
* if the target goes into MSG IN and sends a DISCONNECT message,
* the command structure is placed into the per instance disconnected
- * queue, and NCR5380_main tries to find more work. If the target is
+ * queue, and NCR5380_main tries to find more work. If the target is
* idle for too long, the system will try to sleep.
*
* If a command has disconnected, eventually an interrupt will trigger,
* calling NCR5380_intr() which will in turn call NCR5380_reselect
* to reestablish a nexus. This will run main if necessary.
*
- * On command termination, the done function will be called as
+ * On command termination, the done function will be called as
* appropriate.
*
- * SCSI pointers are maintained in the SCp field of SCSI command
+ * SCSI pointers are maintained in the SCp field of SCSI command
* structures, being initialized after the command is connected
* in NCR5380_select, and set as appropriate in NCR5380_information_transfer.
* Note that in violation of the standard, an implicit SAVE POINTERS operation
@@ -185,73 +113,48 @@
/*
* Using this file :
* This file a skeleton Linux SCSI driver for the NCR 5380 series
- * of chips. To use it, you write an architecture specific functions
+ * of chips. To use it, you write an architecture specific functions
* and macros and include this file in your driver.
*
- * These macros control options :
- * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be
- * defined.
- *
+ * These macros control options :
+ * AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be
+ * defined.
+ *
* AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- * for commands that return with a CHECK CONDITION status.
+ * for commands that return with a CHECK CONDITION status.
*
* DIFFERENTIAL - if defined, NCR53c81 chips will use external differential
- * transceivers.
+ * transceivers.
*
* DONT_USE_INTR - if defined, never use interrupts, even if we probe or
- * override-configure an IRQ.
- *
- * LIMIT_TRANSFERSIZE - if defined, limit the pseudo-dma transfers to 512
- * bytes at a time. Since interrupts are disabled by default during
- * these transfers, we might need this to give reasonable interrupt
- * service time if the transfer size gets too large.
- *
- * LINKED - if defined, linked commands are supported.
+ * override-configure an IRQ.
*
* PSEUDO_DMA - if defined, PSEUDO DMA is used during the data transfer phases.
*
* REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
*
* REAL_DMA_POLL - if defined, REAL DMA is used but the driver doesn't
- * rely on phase mismatch and EOP interrupts to determine end
- * of phase.
- *
- * UNSAFE - leave interrupts enabled during pseudo-DMA transfers. You
- * only really want to use this if you're having a problem with
- * dropped characters during high speed communications, and even
- * then, you're going to be better off twiddling with transfersize
- * in the high level code.
- *
- * Defaults for these will be provided although the user may want to adjust
- * these to allocate CPU resources to the SCSI driver or "real" code.
- *
- * USLEEP_SLEEP - amount of time, in jiffies, to sleep
- *
- * USLEEP_POLL - amount of time, in jiffies, to poll
+ * rely on phase mismatch and EOP interrupts to determine end
+ * of phase.
*
* These macros MUST be defined :
- * NCR5380_local_declare() - declare any local variables needed for your
- * transfer routines.
*
- * NCR5380_setup(instance) - initialize any local variables needed from a given
- * instance of the host adapter for NCR5380_{read,write,pread,pwrite}
- *
* NCR5380_read(register) - read from the specified register
*
- * NCR5380_write(register, value) - write to the specific register
+ * NCR5380_write(register, value) - write to the specific register
*
- * NCR5380_implementation_fields - additional fields needed for this
- * specific implementation of the NCR5380
+ * NCR5380_implementation_fields - additional fields needed for this
+ * specific implementation of the NCR5380
*
* Either real DMA *or* pseudo DMA may be implemented
- * REAL functions :
+ * REAL functions :
* NCR5380_REAL_DMA should be defined if real DMA is to be used.
- * Note that the DMA setup functions should return the number of bytes
- * that they were able to program the controller for.
+ * Note that the DMA setup functions should return the number of bytes
+ * that they were able to program the controller for.
*
- * Also note that generic i386/PC versions of these macros are
- * available as NCR5380_i386_dma_write_setup,
- * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
+ * Also note that generic i386/PC versions of these macros are
+ * available as NCR5380_i386_dma_write_setup,
+ * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
*
* NCR5380_dma_write_setup(instance, src, count) - initialize
* NCR5380_dma_read_setup(instance, dst, count) - initialize
@@ -262,25 +165,25 @@
* NCR5380_pread(instance, dst, count);
*
* The generic driver is initialized by calling NCR5380_init(instance),
- * after setting the appropriate host specific fields and ID. If the
+ * after setting the appropriate host specific fields and ID. If the
* driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
* possible) function may be used.
*/
-static int do_abort(struct Scsi_Host *host);
-static void do_reset(struct Scsi_Host *host);
+static int do_abort(struct Scsi_Host *);
+static void do_reset(struct Scsi_Host *);
-/*
- * initialize_SCp - init the scsi pointer field
- * @cmd: command block to set up
+/**
+ * initialize_SCp - init the scsi pointer field
+ * @cmd: command block to set up
*
- * Set up the internal fields in the SCSI command.
+ * Set up the internal fields in the SCSI command.
*/
static inline void initialize_SCp(struct scsi_cmnd *cmd)
{
- /*
- * Initialize the Scsi Pointer field so that all of the commands in the
+ /*
+ * Initialize the Scsi Pointer field so that all of the commands in the
* various queues are valid.
*/
@@ -295,120 +198,123 @@ static inline void initialize_SCp(struct scsi_cmnd *cmd)
cmd->SCp.ptr = NULL;
cmd->SCp.this_residual = 0;
}
+
+ cmd->SCp.Status = 0;
+ cmd->SCp.Message = 0;
}
/**
- * NCR5380_poll_politely - wait for NCR5380 status bits
- * @instance: controller to poll
- * @reg: 5380 register to poll
- * @bit: Bitmask to check
- * @val: Value required to exit
- *
- * Polls the NCR5380 in a reasonably efficient manner waiting for
- * an event to occur, after a short quick poll we begin giving the
- * CPU back in non IRQ contexts
- *
- * Returns the value of the register or a negative error code.
+ * NCR5380_poll_politely2 - wait for two chip register values
+ * @instance: controller to poll
+ * @reg1: 5380 register to poll
+ * @bit1: Bitmask to check
+ * @val1: Expected value
+ * @reg2: Second 5380 register to poll
+ * @bit2: Second bitmask to check
+ * @val2: Second expected value
+ * @wait: Time-out in jiffies
+ *
+ * Polls the chip in a reasonably efficient manner waiting for an
+ * event to occur. After a short quick poll we begin to yield the CPU
+ * (if possible). In irq contexts the time-out is arbitrarily limited.
+ * Callers may hold locks as long as they are held in irq mode.
+ *
+ * Returns 0 if either or both event(s) occurred otherwise -ETIMEDOUT.
*/
-
-static int NCR5380_poll_politely(struct Scsi_Host *instance, int reg, int bit, int val, int t)
+
+static int NCR5380_poll_politely2(struct Scsi_Host *instance,
+ int reg1, int bit1, int val1,
+ int reg2, int bit2, int val2, int wait)
{
- NCR5380_local_declare();
- int n = 500; /* At about 8uS a cycle for the cpu access */
- unsigned long end = jiffies + t;
- int r;
-
- NCR5380_setup(instance);
-
- while( n-- > 0)
- {
- r = NCR5380_read(reg);
- if((r & bit) == val)
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ unsigned long deadline = jiffies + wait;
+ unsigned long n;
+
+ /* Busy-wait for up to 10 ms */
+ n = min(10000U, jiffies_to_usecs(wait));
+ n *= hostdata->accesses_per_ms;
+ n /= 2000;
+ do {
+ if ((NCR5380_read(reg1) & bit1) == val1)
+ return 0;
+ if ((NCR5380_read(reg2) & bit2) == val2)
return 0;
cpu_relax();
- }
-
- /* t time yet ? */
- while(time_before(jiffies, end))
- {
- r = NCR5380_read(reg);
- if((r & bit) == val)
+ } while (n--);
+
+ if (irqs_disabled() || in_interrupt())
+ return -ETIMEDOUT;
+
+ /* Repeatedly sleep for 1 ms until deadline */
+ while (time_is_after_jiffies(deadline)) {
+ schedule_timeout_uninterruptible(1);
+ if ((NCR5380_read(reg1) & bit1) == val1)
+ return 0;
+ if ((NCR5380_read(reg2) & bit2) == val2)
return 0;
- if(!in_interrupt())
- cond_resched();
- else
- cpu_relax();
}
+
return -ETIMEDOUT;
}
-static struct {
- unsigned char value;
- const char *name;
-} phases[] __maybe_unused = {
- {PHASE_DATAOUT, "DATAOUT"},
- {PHASE_DATAIN, "DATAIN"},
- {PHASE_CMDOUT, "CMDOUT"},
- {PHASE_STATIN, "STATIN"},
- {PHASE_MSGOUT, "MSGOUT"},
- {PHASE_MSGIN, "MSGIN"},
- {PHASE_UNKNOWN, "UNKNOWN"}
-};
+static inline int NCR5380_poll_politely(struct Scsi_Host *instance,
+ int reg, int bit, int val, int wait)
+{
+ return NCR5380_poll_politely2(instance, reg, bit, val,
+ reg, bit, val, wait);
+}
#if NDEBUG
static struct {
unsigned char mask;
const char *name;
-} signals[] = {
- {SR_DBP, "PARITY"},
- {SR_RST, "RST"},
- {SR_BSY, "BSY"},
- {SR_REQ, "REQ"},
- {SR_MSG, "MSG"},
- {SR_CD, "CD"},
- {SR_IO, "IO"},
- {SR_SEL, "SEL"},
+} signals[] = {
+ {SR_DBP, "PARITY"},
+ {SR_RST, "RST"},
+ {SR_BSY, "BSY"},
+ {SR_REQ, "REQ"},
+ {SR_MSG, "MSG"},
+ {SR_CD, "CD"},
+ {SR_IO, "IO"},
+ {SR_SEL, "SEL"},
{0, NULL}
-},
+},
basrs[] = {
- {BASR_ATN, "ATN"},
- {BASR_ACK, "ACK"},
+ {BASR_ATN, "ATN"},
+ {BASR_ACK, "ACK"},
{0, NULL}
-},
-icrs[] = {
- {ICR_ASSERT_RST, "ASSERT RST"},
- {ICR_ASSERT_ACK, "ASSERT ACK"},
- {ICR_ASSERT_BSY, "ASSERT BSY"},
- {ICR_ASSERT_SEL, "ASSERT SEL"},
- {ICR_ASSERT_ATN, "ASSERT ATN"},
- {ICR_ASSERT_DATA, "ASSERT DATA"},
+},
+icrs[] = {
+ {ICR_ASSERT_RST, "ASSERT RST"},
+ {ICR_ASSERT_ACK, "ASSERT ACK"},
+ {ICR_ASSERT_BSY, "ASSERT BSY"},
+ {ICR_ASSERT_SEL, "ASSERT SEL"},
+ {ICR_ASSERT_ATN, "ASSERT ATN"},
+ {ICR_ASSERT_DATA, "ASSERT DATA"},
{0, NULL}
-},
-mrs[] = {
- {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"},
- {MR_TARGET, "MODE TARGET"},
- {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"},
- {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"},
- {MR_MONITOR_BSY, "MODE MONITOR BSY"},
- {MR_DMA_MODE, "MODE DMA"},
- {MR_ARBITRATE, "MODE ARBITRATION"},
+},
+mrs[] = {
+ {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"},
+ {MR_TARGET, "MODE TARGET"},
+ {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"},
+ {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"},
+ {MR_ENABLE_EOP_INTR, "MODE EOP INTR"},
+ {MR_MONITOR_BSY, "MODE MONITOR BSY"},
+ {MR_DMA_MODE, "MODE DMA"},
+ {MR_ARBITRATE, "MODE ARBITRATION"},
{0, NULL}
};
/**
- * NCR5380_print - print scsi bus signals
- * @instance: adapter state to dump
- *
- * Print the SCSI bus signals for debugging purposes
+ * NCR5380_print - print scsi bus signals
+ * @instance: adapter state to dump
*
- * Locks: caller holds hostdata lock (not essential)
+ * Print the SCSI bus signals for debugging purposes
*/
static void NCR5380_print(struct Scsi_Host *instance)
{
- NCR5380_local_declare();
unsigned char status, data, basr, mr, icr, i;
- NCR5380_setup(instance);
data = NCR5380_read(CURRENT_SCSI_DATA_REG);
status = NCR5380_read(STATUS_REG);
@@ -435,117 +341,56 @@ static void NCR5380_print(struct Scsi_Host *instance)
printk("\n");
}
+static struct {
+ unsigned char value;
+ const char *name;
+} phases[] = {
+ {PHASE_DATAOUT, "DATAOUT"},
+ {PHASE_DATAIN, "DATAIN"},
+ {PHASE_CMDOUT, "CMDOUT"},
+ {PHASE_STATIN, "STATIN"},
+ {PHASE_MSGOUT, "MSGOUT"},
+ {PHASE_MSGIN, "MSGIN"},
+ {PHASE_UNKNOWN, "UNKNOWN"}
+};
-/*
- * NCR5380_print_phase - show SCSI phase
- * @instance: adapter to dump
- *
- * Print the current SCSI phase for debugging purposes
+/**
+ * NCR5380_print_phase - show SCSI phase
+ * @instance: adapter to dump
*
- * Locks: none
+ * Print the current SCSI phase for debugging purposes
*/
static void NCR5380_print_phase(struct Scsi_Host *instance)
{
- NCR5380_local_declare();
unsigned char status;
int i;
- NCR5380_setup(instance);
status = NCR5380_read(STATUS_REG);
if (!(status & SR_REQ))
- printk("scsi%d : REQ not asserted, phase unknown.\n", instance->host_no);
+ shost_printk(KERN_DEBUG, instance, "REQ not asserted, phase unknown.\n");
else {
- for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i);
- printk("scsi%d : phase %s\n", instance->host_no, phases[i].name);
+ for (i = 0; (phases[i].value != PHASE_UNKNOWN) &&
+ (phases[i].value != (status & PHASE_MASK)); ++i)
+ ;
+ shost_printk(KERN_DEBUG, instance, "phase %s\n", phases[i].name);
}
}
#endif
-/*
- * These need tweaking, and would probably work best as per-device
- * flags initialized differently for disk, tape, cd, etc devices.
- * People with broken devices are free to experiment as to what gives
- * the best results for them.
- *
- * USLEEP_SLEEP should be a minimum seek time.
- *
- * USLEEP_POLL should be a maximum rotational latency.
- */
-#ifndef USLEEP_SLEEP
-/* 20 ms (reasonable hard disk speed) */
-#define USLEEP_SLEEP msecs_to_jiffies(20)
-#endif
-/* 300 RPM (floppy speed) */
-#ifndef USLEEP_POLL
-#define USLEEP_POLL msecs_to_jiffies(200)
-#endif
-#ifndef USLEEP_WAITLONG
-/* RvC: (reasonable time to wait on select error) */
-#define USLEEP_WAITLONG USLEEP_SLEEP
-#endif
-/*
- * Function : int should_disconnect (unsigned char cmd)
- *
- * Purpose : decide whether a command would normally disconnect or
- * not, since if it won't disconnect we should go to sleep.
- *
- * Input : cmd - opcode of SCSI command
- *
- * Returns : DISCONNECT_LONG if we should disconnect for a really long
- * time (ie always, sleep, look for REQ active, sleep),
- * DISCONNECT_TIME_TO_DATA if we would only disconnect for a normal
- * time-to-data delay, DISCONNECT_NONE if this command would return
- * immediately.
- *
- * Future sleep algorithms based on time to data can exploit
- * something like this so they can differentiate between "normal"
- * (ie, read, write, seek) and unusual commands (ie, * format).
- *
- * Note : We don't deal with commands that handle an immediate disconnect,
- *
- */
-
-static int should_disconnect(unsigned char cmd)
-{
- switch (cmd) {
- case READ_6:
- case WRITE_6:
- case SEEK_6:
- case READ_10:
- case WRITE_10:
- case SEEK_10:
- return DISCONNECT_TIME_TO_DATA;
- case FORMAT_UNIT:
- case SEARCH_HIGH:
- case SEARCH_LOW:
- case SEARCH_EQUAL:
- return DISCONNECT_LONG;
- default:
- return DISCONNECT_NONE;
- }
-}
-
-static void NCR5380_set_timer(struct NCR5380_hostdata *hostdata, unsigned long timeout)
-{
- hostdata->time_expires = jiffies + timeout;
- schedule_delayed_work(&hostdata->coroutine, timeout);
-}
-
-
-static int probe_irq __initdata = 0;
+static int probe_irq __initdata;
/**
- * probe_intr - helper for IRQ autoprobe
- * @irq: interrupt number
- * @dev_id: unused
- * @regs: unused
+ * probe_intr - helper for IRQ autoprobe
+ * @irq: interrupt number
+ * @dev_id: unused
+ * @regs: unused
*
- * Set a flag to indicate the IRQ in question was received. This is
- * used by the IRQ probe code.
+ * Set a flag to indicate the IRQ in question was received. This is
+ * used by the IRQ probe code.
*/
-
+
static irqreturn_t __init probe_intr(int irq, void *dev_id)
{
probe_irq = irq;
@@ -553,24 +398,20 @@ static irqreturn_t __init probe_intr(int irq, void *dev_id)
}
/**
- * NCR5380_probe_irq - find the IRQ of an NCR5380
- * @instance: NCR5380 controller
- * @possible: bitmask of ISA IRQ lines
+ * NCR5380_probe_irq - find the IRQ of an NCR5380
+ * @instance: NCR5380 controller
+ * @possible: bitmask of ISA IRQ lines
*
- * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
- * and then looking to see what interrupt actually turned up.
- *
- * Locks: none, irqs must be enabled on entry
+ * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
+ * and then looking to see what interrupt actually turned up.
*/
static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
int possible)
{
- NCR5380_local_declare();
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned long timeout;
int trying_irqs, i, mask;
- NCR5380_setup(instance);
for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1)
if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", NULL) == 0))
@@ -581,7 +422,7 @@ static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
/*
* A interrupt is triggered whenever BSY = false, SEL = true
- * and a bit set in the SELECT_ENABLE_REG is asserted on the
+ * and a bit set in the SELECT_ENABLE_REG is asserted on the
* SCSI bus.
*
* Note that the bus is only driven when the phase control signals
@@ -596,7 +437,7 @@ static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
while (probe_irq == NO_IRQ && time_before(jiffies, timeout))
schedule_timeout_uninterruptible(1);
-
+
NCR5380_write(SELECT_ENABLE_REG, 0);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
@@ -608,12 +449,10 @@ static int __init __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
}
/**
- * NCR58380_info - report driver and host information
- * @instance: relevant scsi host instance
- *
- * For use as the host template info() handler.
+ * NCR58380_info - report driver and host information
+ * @instance: relevant scsi host instance
*
- * Locks: none
+ * For use as the host template info() handler.
*/
static const char *NCR5380_info(struct Scsi_Host *instance)
@@ -633,20 +472,14 @@ static void prepare_info(struct Scsi_Host *instance)
"can_queue %d, cmd_per_lun %d, "
"sg_tablesize %d, this_id %d, "
"flags { %s%s%s}, "
-#if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG)
- "USLEEP_POLL %lu, USLEEP_WAITLONG %lu, "
-#endif
"options { %s} ",
instance->hostt->name, instance->io_port, instance->n_io_port,
instance->base, instance->irq,
instance->can_queue, instance->cmd_per_lun,
instance->sg_tablesize, instance->this_id,
- hostdata->flags & FLAG_NCR53C400 ? "NCR53C400 " : "",
- hostdata->flags & FLAG_DTC3181E ? "DTC3181E " : "",
+ hostdata->flags & FLAG_NO_DMA_FIXUP ? "NO_DMA_FIXUP " : "",
hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
-#if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG)
- USLEEP_POLL, USLEEP_WAITLONG,
-#endif
+ hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "",
#ifdef AUTOPROBE_IRQ
"AUTOPROBE_IRQ "
#endif
@@ -665,46 +498,10 @@ static void prepare_info(struct Scsi_Host *instance)
#ifdef PSEUDO_DMA
"PSEUDO_DMA "
#endif
-#ifdef UNSAFE
- "UNSAFE "
-#endif
-#ifdef NCR53C400
- "NCR53C400 "
-#endif
"");
}
-/**
- * NCR5380_print_status - dump controller info
- * @instance: controller to dump
- *
- * Print commands in the various queues, called from NCR5380_abort
- * and NCR5380_debug to aid debugging.
- *
- * Locks: called functions disable irqs
- */
-
-static void NCR5380_print_status(struct Scsi_Host *instance)
-{
- NCR5380_dprint(NDEBUG_ANY, instance);
- NCR5380_dprint_phase(NDEBUG_ANY, instance);
-}
-
#ifdef PSEUDO_DMA
-/******************************************/
-/*
- * /proc/scsi/[dtc pas16 t128 generic]/[0-ASC_NUM_BOARD_SUPPORTED]
- *
- * *buffer: I/O buffer
- * **start: if inout == FALSE pointer into buffer where user read should start
- * offset: current offset
- * length: length of buffer
- * hostno: Scsi_Host host_no
- * inout: TRUE - user is writing; FALSE - user is reading
- *
- * Return the number of bytes read from or written
- */
-
static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
char *buffer, int length)
{
@@ -714,104 +511,41 @@ static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
hostdata->spin_max_w = 0;
return 0;
}
-#endif
-
-static
-void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m);
-static
-void lprint_command(unsigned char *cmd, struct seq_file *m);
-static
-void lprint_opcode(int opcode, struct seq_file *m);
static int __maybe_unused NCR5380_show_info(struct seq_file *m,
- struct Scsi_Host *instance)
+ struct Scsi_Host *instance)
{
- struct NCR5380_hostdata *hostdata;
- struct scsi_cmnd *ptr;
-
- hostdata = (struct NCR5380_hostdata *) instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
-#ifdef PSEUDO_DMA
seq_printf(m, "Highwater I/O busy spin counts: write %d, read %d\n",
hostdata->spin_max_w, hostdata->spin_max_r);
-#endif
- spin_lock_irq(instance->host_lock);
- if (!hostdata->connected)
- seq_printf(m, "scsi%d: no currently connected command\n", instance->host_no);
- else
- lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m);
- seq_printf(m, "scsi%d: issue_queue\n", instance->host_no);
- for (ptr = (struct scsi_cmnd *) hostdata->issue_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble)
- lprint_Scsi_Cmnd(ptr, m);
-
- seq_printf(m, "scsi%d: disconnected_queue\n", instance->host_no);
- for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble)
- lprint_Scsi_Cmnd(ptr, m);
- spin_unlock_irq(instance->host_lock);
return 0;
}
-
-static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
-{
- seq_printf(m, "scsi%d : destination target %d, lun %llu\n", cmd->device->host->host_no, cmd->device->id, cmd->device->lun);
- seq_puts(m, " command = ");
- lprint_command(cmd->cmnd, m);
-}
-
-static void lprint_command(unsigned char *command, struct seq_file *m)
-{
- int i, s;
- lprint_opcode(command[0], m);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- seq_printf(m, "%02x ", command[i]);
- seq_putc(m, '\n');
-}
-
-static void lprint_opcode(int opcode, struct seq_file *m)
-{
- seq_printf(m, "%2d (0x%02x)", opcode, opcode);
-}
-
+#endif
/**
- * NCR5380_init - initialise an NCR5380
- * @instance: adapter to configure
- * @flags: control flags
+ * NCR5380_init - initialise an NCR5380
+ * @instance: adapter to configure
+ * @flags: control flags
*
- * Initializes *instance and corresponding 5380 chip,
- * with flags OR'd into the initial flags value.
+ * Initializes *instance and corresponding 5380 chip,
+ * with flags OR'd into the initial flags value.
*
- * Notes : I assume that the host, hostno, and id bits have been
- * set correctly. I don't care about the irq and other fields.
+ * Notes : I assume that the host, hostno, and id bits have been
+ * set correctly. I don't care about the irq and other fields.
*
- * Returns 0 for success
- *
- * Locks: interrupts must be enabled when we are called
+ * Returns 0 for success
*/
static int NCR5380_init(struct Scsi_Host *instance, int flags)
{
- NCR5380_local_declare();
- int i, pass;
- unsigned long timeout;
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
-
- if(in_interrupt())
- printk(KERN_ERR "NCR5380_init called with interrupts off!\n");
- /*
- * On NCR53C400 boards, NCR5380 registers are mapped 8 past
- * the base address.
- */
-
-#ifdef NCR53C400
- if (flags & FLAG_NCR53C400)
- instance->NCR5380_instance_name += NCR53C400_address_adjust;
-#endif
-
- NCR5380_setup(instance);
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ int i;
+ unsigned long deadline;
- hostdata->aborted = 0;
+ hostdata->host = instance;
hostdata->id_mask = 1 << instance->this_id;
+ hostdata->id_higher_mask = 0;
for (i = hostdata->id_mask; i <= 0x80; i <<= 1)
if (i > hostdata->id_mask)
hostdata->id_higher_mask |= i;
@@ -820,21 +554,21 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags)
#ifdef REAL_DMA
hostdata->dmalen = 0;
#endif
- hostdata->targets_present = 0;
+ spin_lock_init(&hostdata->lock);
hostdata->connected = NULL;
- hostdata->issue_queue = NULL;
- hostdata->disconnected_queue = NULL;
-
- INIT_DELAYED_WORK(&hostdata->coroutine, NCR5380_main);
-
- /* The CHECK code seems to break the 53C400. Will check it later maybe */
- if (flags & FLAG_NCR53C400)
- hostdata->flags = FLAG_HAS_LAST_BYTE_SENT | flags;
- else
- hostdata->flags = FLAG_CHECK_LAST_BYTE_SENT | flags;
+ hostdata->sensing = NULL;
+ INIT_LIST_HEAD(&hostdata->autosense);
+ INIT_LIST_HEAD(&hostdata->unissued);
+ INIT_LIST_HEAD(&hostdata->disconnected);
- hostdata->host = instance;
- hostdata->time_expires = 0;
+ hostdata->flags = flags;
+
+ INIT_WORK(&hostdata->main_task, NCR5380_main);
+ hostdata->work_q = alloc_workqueue("ncr5380_%d",
+ WQ_UNBOUND | WQ_MEM_RECLAIM,
+ 1, instance->host_no);
+ if (!hostdata->work_q)
+ return -ENOMEM;
prepare_info(instance);
@@ -843,43 +577,69 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags)
NCR5380_write(TARGET_COMMAND_REG, 0);
NCR5380_write(SELECT_ENABLE_REG, 0);
-#ifdef NCR53C400
- if (hostdata->flags & FLAG_NCR53C400) {
- NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
- }
-#endif
+ /* Calibrate register polling loop */
+ i = 0;
+ deadline = jiffies + 1;
+ do {
+ cpu_relax();
+ } while (time_is_after_jiffies(deadline));
+ deadline += msecs_to_jiffies(256);
+ do {
+ NCR5380_read(STATUS_REG);
+ ++i;
+ cpu_relax();
+ } while (time_is_after_jiffies(deadline));
+ hostdata->accesses_per_ms = i / 256;
- /*
- * Detect and correct bus wedge problems.
- *
- * If the system crashed, it may have crashed in a state
- * where a SCSI command was still executing, and the
- * SCSI bus is not in a BUS FREE STATE.
- *
- * If this is the case, we'll try to abort the currently
- * established nexus which we know nothing about, and that
- * failing, do a hard reset of the SCSI bus
- */
+ return 0;
+}
+
+/**
+ * NCR5380_maybe_reset_bus - Detect and correct bus wedge problems.
+ * @instance: adapter to check
+ *
+ * If the system crashed, it may have crashed with a connected target and
+ * the SCSI bus busy. Check for BUS FREE phase. If not, try to abort the
+ * currently established nexus, which we know nothing about. Failing that
+ * do a bus reset.
+ *
+ * Note that a bus reset will cause the chip to assert IRQ.
+ *
+ * Returns 0 if successful, otherwise -ENXIO.
+ */
+
+static int NCR5380_maybe_reset_bus(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ int pass;
for (pass = 1; (NCR5380_read(STATUS_REG) & SR_BSY) && pass <= 6; ++pass) {
switch (pass) {
case 1:
case 3:
case 5:
- printk(KERN_INFO "scsi%d: SCSI bus busy, waiting up to five seconds\n", instance->host_no);
- timeout = jiffies + 5 * HZ;
- NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, 0, 5*HZ);
+ shost_printk(KERN_ERR, instance, "SCSI bus busy, waiting up to five seconds\n");
+ NCR5380_poll_politely(instance,
+ STATUS_REG, SR_BSY, 0, 5 * HZ);
break;
case 2:
- printk(KERN_WARNING "scsi%d: bus busy, attempting abort\n", instance->host_no);
+ shost_printk(KERN_ERR, instance, "bus busy, attempting abort\n");
do_abort(instance);
break;
case 4:
- printk(KERN_WARNING "scsi%d: bus busy, attempting reset\n", instance->host_no);
+ shost_printk(KERN_ERR, instance, "bus busy, attempting reset\n");
do_reset(instance);
+ /* Wait after a reset; the SCSI standard calls for
+ * 250ms, we wait 500ms to be on the safe side.
+ * But some Toshiba CD-ROMs need ten times that.
+ */
+ if (hostdata->flags & FLAG_TOSHIBA_DELAY)
+ msleep(2500);
+ else
+ msleep(500);
break;
case 6:
- printk(KERN_ERR "scsi%d: bus locked solid or invalid override\n", instance->host_no);
+ shost_printk(KERN_ERR, instance, "bus locked solid\n");
return -ENXIO;
}
}
@@ -887,450 +647,513 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags)
}
/**
- * NCR5380_exit - remove an NCR5380
- * @instance: adapter to remove
+ * NCR5380_exit - remove an NCR5380
+ * @instance: adapter to remove
+ *
+ * Assumes that no more work can be queued (e.g. by NCR5380_intr).
*/
static void NCR5380_exit(struct Scsi_Host *instance)
{
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
- cancel_delayed_work_sync(&hostdata->coroutine);
+ cancel_work_sync(&hostdata->main_task);
+ destroy_workqueue(hostdata->work_q);
}
/**
- * NCR5380_queue_command - queue a command
- * @cmd: SCSI command
- * @done: completion handler
- *
- * cmd is added to the per instance issue_queue, with minor
- * twiddling done to the host specific fields of cmd. If the
- * main coroutine is not running, it is restarted.
+ * complete_cmd - finish processing a command and return it to the SCSI ML
+ * @instance: the host instance
+ * @cmd: command to complete
+ */
+
+static void complete_cmd(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ dsprintk(NDEBUG_QUEUES, instance, "complete_cmd: cmd %p\n", cmd);
+
+ if (hostdata->sensing == cmd) {
+ /* Autosense processing ends here */
+ if ((cmd->result & 0xff) != SAM_STAT_GOOD) {
+ scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+ set_host_byte(cmd, DID_ERROR);
+ } else
+ scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+ hostdata->sensing = NULL;
+ }
+
+ hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
+
+ cmd->scsi_done(cmd);
+}
+
+/**
+ * NCR5380_queue_command - queue a command
+ * @instance: the relevant SCSI adapter
+ * @cmd: SCSI command
*
- * Locks: host lock taken by caller
+ * cmd is added to the per-instance issue queue, with minor
+ * twiddling done to the host specific fields of cmd. If the
+ * main coroutine is not running, it is restarted.
*/
-static int NCR5380_queue_command_lck(struct scsi_cmnd *cmd, void (*done) (struct scsi_cmnd *))
+static int NCR5380_queue_command(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
{
- struct Scsi_Host *instance = cmd->device->host;
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
- struct scsi_cmnd *tmp;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
+ unsigned long flags;
#if (NDEBUG & NDEBUG_NO_WRITE)
switch (cmd->cmnd[0]) {
case WRITE_6:
case WRITE_10:
- printk("scsi%d : WRITE attempted with NO_WRITE debugging flag set\n", instance->host_no);
+ shost_printk(KERN_DEBUG, instance, "WRITE attempted with NDEBUG_NO_WRITE set\n");
cmd->result = (DID_ERROR << 16);
- done(cmd);
+ cmd->scsi_done(cmd);
return 0;
}
-#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
-
- /*
- * We use the host_scribble field as a pointer to the next command
- * in a queue
- */
+#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
- cmd->host_scribble = NULL;
- cmd->scsi_done = done;
cmd->result = 0;
- /*
- * Insert the cmd into the issue queue. Note that REQUEST SENSE
+ spin_lock_irqsave(&hostdata->lock, flags);
+
+ /*
+ * Insert the cmd into the issue queue. Note that REQUEST SENSE
* commands are added to the head of the queue since any command will
- * clear the contingent allegiance condition that exists and the
+ * clear the contingent allegiance condition that exists and the
* sense data is only guaranteed to be valid while the condition exists.
*/
- if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
- LIST(cmd, hostdata->issue_queue);
- cmd->host_scribble = (unsigned char *) hostdata->issue_queue;
- hostdata->issue_queue = cmd;
- } else {
- for (tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp->host_scribble; tmp = (struct scsi_cmnd *) tmp->host_scribble);
- LIST(cmd, tmp);
- tmp->host_scribble = (unsigned char *) cmd;
- }
- dprintk(NDEBUG_QUEUES, "scsi%d : command added to %s of queue\n", instance->host_no, (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
+ if (cmd->cmnd[0] == REQUEST_SENSE)
+ list_add(&ncmd->list, &hostdata->unissued);
+ else
+ list_add_tail(&ncmd->list, &hostdata->unissued);
+
+ spin_unlock_irqrestore(&hostdata->lock, flags);
+
+ dsprintk(NDEBUG_QUEUES, instance, "command %p added to %s of queue\n",
+ cmd, (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
- /* Run the coroutine if it isn't already running. */
/* Kick off command processing */
- schedule_delayed_work(&hostdata->coroutine, 0);
+ queue_work(hostdata->work_q, &hostdata->main_task);
return 0;
}
-static DEF_SCSI_QCMD(NCR5380_queue_command)
+/**
+ * dequeue_next_cmd - dequeue a command for processing
+ * @instance: the scsi host instance
+ *
+ * Priority is given to commands on the autosense queue. These commands
+ * need autosense because of a CHECK CONDITION result.
+ *
+ * Returns a command pointer if a command is found for a target that is
+ * not already busy. Otherwise returns NULL.
+ */
+
+static struct scsi_cmnd *dequeue_next_cmd(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ struct NCR5380_cmd *ncmd;
+ struct scsi_cmnd *cmd;
+
+ if (list_empty(&hostdata->autosense)) {
+ list_for_each_entry(ncmd, &hostdata->unissued, list) {
+ cmd = NCR5380_to_scmd(ncmd);
+ dsprintk(NDEBUG_QUEUES, instance, "dequeue: cmd=%p target=%d busy=0x%02x lun=%llu\n",
+ cmd, scmd_id(cmd), hostdata->busy[scmd_id(cmd)], cmd->device->lun);
+
+ if (!(hostdata->busy[scmd_id(cmd)] & (1 << cmd->device->lun))) {
+ list_del(&ncmd->list);
+ dsprintk(NDEBUG_QUEUES, instance,
+ "dequeue: removed %p from issue queue\n", cmd);
+ return cmd;
+ }
+ }
+ } else {
+ /* Autosense processing begins here */
+ ncmd = list_first_entry(&hostdata->autosense,
+ struct NCR5380_cmd, list);
+ list_del(&ncmd->list);
+ cmd = NCR5380_to_scmd(ncmd);
+ dsprintk(NDEBUG_QUEUES, instance,
+ "dequeue: removed %p from autosense queue\n", cmd);
+ scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
+ hostdata->sensing = cmd;
+ return cmd;
+ }
+ return NULL;
+}
+
+static void requeue_cmd(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
+
+ if (hostdata->sensing) {
+ scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+ list_add(&ncmd->list, &hostdata->autosense);
+ hostdata->sensing = NULL;
+ } else
+ list_add(&ncmd->list, &hostdata->unissued);
+}
/**
- * NCR5380_main - NCR state machines
- *
- * NCR5380_main is a coroutine that runs as long as more work can
- * be done on the NCR5380 host adapters in a system. Both
- * NCR5380_queue_command() and NCR5380_intr() will try to start it
- * in case it is not running.
- *
- * Locks: called as its own thread with no locks held. Takes the
- * host lock and called routines may take the isa dma lock.
+ * NCR5380_main - NCR state machines
+ *
+ * NCR5380_main is a coroutine that runs as long as more work can
+ * be done on the NCR5380 host adapters in a system. Both
+ * NCR5380_queue_command() and NCR5380_intr() will try to start it
+ * in case it is not running.
*/
static void NCR5380_main(struct work_struct *work)
{
struct NCR5380_hostdata *hostdata =
- container_of(work, struct NCR5380_hostdata, coroutine.work);
+ container_of(work, struct NCR5380_hostdata, main_task);
struct Scsi_Host *instance = hostdata->host;
- struct scsi_cmnd *tmp, *prev;
+ struct scsi_cmnd *cmd;
int done;
-
- spin_lock_irq(instance->host_lock);
+
do {
- /* Lock held here */
done = 1;
- if (!hostdata->connected && !hostdata->selecting) {
- dprintk(NDEBUG_MAIN, "scsi%d : not connected\n", instance->host_no);
- /*
- * Search through the issue_queue for a command destined
- * for a target that's not busy.
- */
- for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL; tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble)
- {
- if (prev != tmp)
- dprintk(NDEBUG_LISTS, "MAIN tmp=%p target=%d busy=%d lun=%llu\n", tmp, tmp->device->id, hostdata->busy[tmp->device->id], tmp->device->lun);
- /* When we find one, remove it from the issue queue. */
- if (!(hostdata->busy[tmp->device->id] &
- (1 << (u8)(tmp->device->lun & 0xff)))) {
- if (prev) {
- REMOVE(prev, prev->host_scribble, tmp, tmp->host_scribble);
- prev->host_scribble = tmp->host_scribble;
- } else {
- REMOVE(-1, hostdata->issue_queue, tmp, tmp->host_scribble);
- hostdata->issue_queue = (struct scsi_cmnd *) tmp->host_scribble;
- }
- tmp->host_scribble = NULL;
- /*
- * Attempt to establish an I_T_L nexus here.
- * On success, instance->hostdata->connected is set.
- * On failure, we must add the command back to the
- * issue queue so we can keep trying.
- */
- dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, "scsi%d : main() : command for target %d lun %llu removed from issue_queue\n", instance->host_no, tmp->device->id, tmp->device->lun);
-
- /*
- * A successful selection is defined as one that
- * leaves us with the command connected and
- * in hostdata->connected, OR has terminated the
- * command.
- *
- * With successful commands, we fall through
- * and see if we can do an information transfer,
- * with failures we will restart.
- */
- hostdata->selecting = NULL;
- /* RvC: have to preset this to indicate a new command is being performed */
+ spin_lock_irq(&hostdata->lock);
+ while (!hostdata->connected &&
+ (cmd = dequeue_next_cmd(instance))) {
- /*
- * REQUEST SENSE commands are issued without tagged
- * queueing, even on SCSI-II devices because the
- * contingent allegiance condition exists for the
- * entire unit.
- */
+ dsprintk(NDEBUG_MAIN, instance, "main: dequeued %p\n", cmd);
- if (!NCR5380_select(instance, tmp)) {
- break;
- } else {
- LIST(tmp, hostdata->issue_queue);
- tmp->host_scribble = (unsigned char *) hostdata->issue_queue;
- hostdata->issue_queue = tmp;
- done = 0;
- dprintk(NDEBUG_MAIN|NDEBUG_QUEUES, "scsi%d : main(): select() failed, returned to issue_queue\n", instance->host_no);
- }
- /* lock held here still */
- } /* if target/lun is not busy */
- } /* for */
- /* exited locked */
- } /* if (!hostdata->connected) */
- if (hostdata->selecting) {
- tmp = (struct scsi_cmnd *) hostdata->selecting;
- /* Selection will drop and retake the lock */
- if (!NCR5380_select(instance, tmp)) {
- /* Ok ?? */
+ /*
+ * Attempt to establish an I_T_L nexus here.
+ * On success, instance->hostdata->connected is set.
+ * On failure, we must add the command back to the
+ * issue queue so we can keep trying.
+ */
+ /*
+ * REQUEST SENSE commands are issued without tagged
+ * queueing, even on SCSI-II devices because the
+ * contingent allegiance condition exists for the
+ * entire unit.
+ */
+
+ cmd = NCR5380_select(instance, cmd);
+ if (!cmd) {
+ dsprintk(NDEBUG_MAIN, instance, "main: select complete\n");
} else {
- /* RvC: device failed, so we wait a long time
- this is needed for Mustek scanners, that
- do not respond to commands immediately
- after a scan */
- printk(KERN_DEBUG "scsi%d: device %d did not respond in time\n", instance->host_no, tmp->device->id);
- LIST(tmp, hostdata->issue_queue);
- tmp->host_scribble = (unsigned char *) hostdata->issue_queue;
- hostdata->issue_queue = tmp;
- NCR5380_set_timer(hostdata, USLEEP_WAITLONG);
+ dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, instance,
+ "main: select failed, returning %p to queue\n", cmd);
+ requeue_cmd(instance, cmd);
}
- } /* if hostdata->selecting */
+ }
if (hostdata->connected
#ifdef REAL_DMA
&& !hostdata->dmalen
#endif
- && (!hostdata->time_expires || time_before_eq(hostdata->time_expires, jiffies))
) {
- dprintk(NDEBUG_MAIN, "scsi%d : main() : performing information transfer\n", instance->host_no);
+ dsprintk(NDEBUG_MAIN, instance, "main: performing information transfer\n");
NCR5380_information_transfer(instance);
- dprintk(NDEBUG_MAIN, "scsi%d : main() : done set false\n", instance->host_no);
done = 0;
- } else
- break;
+ }
+ spin_unlock_irq(&hostdata->lock);
+ if (!done)
+ cond_resched();
} while (!done);
-
- spin_unlock_irq(instance->host_lock);
}
#ifndef DONT_USE_INTR
/**
- * NCR5380_intr - generic NCR5380 irq handler
- * @irq: interrupt number
- * @dev_id: device info
- *
- * Handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses
- * from the disconnected queue, and restarting NCR5380_main()
- * as required.
- *
- * Locks: takes the needed instance locks
+ * NCR5380_intr - generic NCR5380 irq handler
+ * @irq: interrupt number
+ * @dev_id: device info
+ *
+ * Handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses
+ * from the disconnected queue, and restarting NCR5380_main()
+ * as required.
+ *
+ * The chip can assert IRQ in any of six different conditions. The IRQ flag
+ * is then cleared by reading the Reset Parity/Interrupt Register (RPIR).
+ * Three of these six conditions are latched in the Bus and Status Register:
+ * - End of DMA (cleared by ending DMA Mode)
+ * - Parity error (cleared by reading RPIR)
+ * - Loss of BSY (cleared by reading RPIR)
+ * Two conditions have flag bits that are not latched:
+ * - Bus phase mismatch (non-maskable in DMA Mode, cleared by ending DMA Mode)
+ * - Bus reset (non-maskable)
+ * The remaining condition has no flag bit at all:
+ * - Selection/reselection
+ *
+ * Hence, establishing the cause(s) of any interrupt is partly guesswork.
+ * In "The DP8490 and DP5380 Comparison Guide", National Semiconductor
+ * claimed that "the design of the [DP8490] interrupt logic ensures
+ * interrupts will not be lost (they can be on the DP5380)."
+ * The L5380/53C80 datasheet from LOGIC Devices has more details.
+ *
+ * Checking for bus reset by reading RST is futile because of interrupt
+ * latency, but a bus reset will reset chip logic. Checking for parity error
+ * is unnecessary because that interrupt is never enabled. A Loss of BSY
+ * condition will clear DMA Mode. We can tell when this occurs because the
+ * the Busy Monitor interrupt is enabled together with DMA Mode.
*/
-static irqreturn_t NCR5380_intr(int dummy, void *dev_id)
+static irqreturn_t NCR5380_intr(int irq, void *dev_id)
{
- NCR5380_local_declare();
struct Scsi_Host *instance = dev_id;
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
- int done;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ int handled = 0;
unsigned char basr;
unsigned long flags;
- dprintk(NDEBUG_INTR, "scsi : NCR5380 irq %d triggered\n",
- instance->irq);
+ spin_lock_irqsave(&hostdata->lock, flags);
+
+ basr = NCR5380_read(BUS_AND_STATUS_REG);
+ if (basr & BASR_IRQ) {
+ unsigned char mr = NCR5380_read(MODE_REG);
+ unsigned char sr = NCR5380_read(STATUS_REG);
+
+ dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
+ irq, basr, sr, mr);
- do {
- done = 1;
- spin_lock_irqsave(instance->host_lock, flags);
- /* Look for pending interrupts */
- NCR5380_setup(instance);
- basr = NCR5380_read(BUS_AND_STATUS_REG);
- /* XXX dispatch to appropriate routine if found and done=0 */
- if (basr & BASR_IRQ) {
- NCR5380_dprint(NDEBUG_INTR, instance);
- if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) {
- done = 0;
- dprintk(NDEBUG_INTR, "scsi%d : SEL interrupt\n", instance->host_no);
- NCR5380_reselect(instance);
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- } else if (basr & BASR_PARITY_ERROR) {
- dprintk(NDEBUG_INTR, "scsi%d : PARITY interrupt\n", instance->host_no);
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- } else if ((NCR5380_read(STATUS_REG) & SR_RST) == SR_RST) {
- dprintk(NDEBUG_INTR, "scsi%d : RESET interrupt\n", instance->host_no);
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- } else {
#if defined(REAL_DMA)
- /*
- * We should only get PHASE MISMATCH and EOP interrupts
- * if we have DMA enabled, so do a sanity check based on
- * the current setting of the MODE register.
- */
+ if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) {
+ /* Probably End of DMA, Phase Mismatch or Loss of BSY.
+ * We ack IRQ after clearing Mode Register. Workarounds
+ * for End of DMA errata need to happen in DMA Mode.
+ */
- if ((NCR5380_read(MODE_REG) & MR_DMA) && ((basr & BASR_END_DMA_TRANSFER) || !(basr & BASR_PHASE_MATCH))) {
- int transferred;
+ dsprintk(NDEBUG_INTR, instance, "interrupt in DMA mode\n");
- if (!hostdata->connected)
- panic("scsi%d : received end of DMA interrupt with no connected cmd\n", instance->hostno);
+ int transferred;
- transferred = (hostdata->dmalen - NCR5380_dma_residual(instance));
- hostdata->connected->SCp.this_residual -= transferred;
- hostdata->connected->SCp.ptr += transferred;
- hostdata->dmalen = 0;
+ if (!hostdata->connected)
+ panic("scsi%d : DMA interrupt with no connected cmd\n",
+ instance->hostno);
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-
- /* FIXME: we need to poll briefly then defer a workqueue task ! */
- NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG, BASR_ACK, 0, 2*HZ);
+ transferred = hostdata->dmalen - NCR5380_dma_residual(instance);
+ hostdata->connected->SCp.this_residual -= transferred;
+ hostdata->connected->SCp.ptr += transferred;
+ hostdata->dmalen = 0;
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- }
-#else
- dprintk(NDEBUG_INTR, "scsi : unknown interrupt, BASR 0x%X, MR 0x%X, SR 0x%x\n", basr, NCR5380_read(MODE_REG), NCR5380_read(STATUS_REG));
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-#endif
+ /* FIXME: we need to poll briefly then defer a workqueue task ! */
+ NCR5380_poll_politely(hostdata, BUS_AND_STATUS_REG, BASR_ACK, 0, 2 * HZ);
+
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ } else
+#endif /* REAL_DMA */
+ if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) &&
+ (sr & (SR_SEL | SR_IO | SR_BSY | SR_RST)) == (SR_SEL | SR_IO)) {
+ /* Probably reselected */
+ NCR5380_write(SELECT_ENABLE_REG, 0);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+
+ dsprintk(NDEBUG_INTR, instance, "interrupt with SEL and IO\n");
+
+ if (!hostdata->connected) {
+ NCR5380_reselect(instance);
+ queue_work(hostdata->work_q, &hostdata->main_task);
}
- } /* if BASR_IRQ */
- spin_unlock_irqrestore(instance->host_lock, flags);
- if(!done)
- schedule_delayed_work(&hostdata->coroutine, 0);
- } while (!done);
- return IRQ_HANDLED;
+ if (!hostdata->connected)
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ } else {
+ /* Probably Bus Reset */
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+
+ dsprintk(NDEBUG_INTR, instance, "unknown interrupt\n");
+ }
+ handled = 1;
+ } else {
+ shost_printk(KERN_NOTICE, instance, "interrupt without IRQ bit\n");
+ }
+
+ spin_unlock_irqrestore(&hostdata->lock, flags);
+
+ return IRQ_RETVAL(handled);
}
-#endif
+#endif
-/*
+/*
* Function : int NCR5380_select(struct Scsi_Host *instance,
- * struct scsi_cmnd *cmd)
+ * struct scsi_cmnd *cmd)
*
* Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
- * including ARBITRATION, SELECTION, and initial message out for
- * IDENTIFY and queue messages.
- *
- * Inputs : instance - instantiation of the 5380 driver on which this
- * target lives, cmd - SCSI command to execute.
- *
- * Returns : -1 if selection could not execute for some reason,
- * 0 if selection succeeded or failed because the target
- * did not respond.
- *
- * Side effects :
- * If bus busy, arbitration failed, etc, NCR5380_select() will exit
- * with registers as they should have been on entry - ie
- * SELECT_ENABLE will be set appropriately, the NCR5380
- * will cease to drive any SCSI bus signals.
- *
- * If successful : I_T_L or I_T_L_Q nexus will be established,
- * instance->connected will be set to cmd.
- * SELECT interrupt will be disabled.
- *
- * If failed (no target) : cmd->scsi_done() will be called, and the
- * cmd->result host byte set to DID_BAD_TARGET.
- *
- * Locks: caller holds hostdata lock in IRQ mode
+ * including ARBITRATION, SELECTION, and initial message out for
+ * IDENTIFY and queue messages.
+ *
+ * Inputs : instance - instantiation of the 5380 driver on which this
+ * target lives, cmd - SCSI command to execute.
+ *
+ * Returns cmd if selection failed but should be retried,
+ * NULL if selection failed and should not be retried, or
+ * NULL if selection succeeded (hostdata->connected == cmd).
+ *
+ * Side effects :
+ * If bus busy, arbitration failed, etc, NCR5380_select() will exit
+ * with registers as they should have been on entry - ie
+ * SELECT_ENABLE will be set appropriately, the NCR5380
+ * will cease to drive any SCSI bus signals.
+ *
+ * If successful : I_T_L or I_T_L_Q nexus will be established,
+ * instance->connected will be set to cmd.
+ * SELECT interrupt will be disabled.
+ *
+ * If failed (no target) : cmd->scsi_done() will be called, and the
+ * cmd->result host byte set to DID_BAD_TARGET.
*/
-
-static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
+
+static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
{
- NCR5380_local_declare();
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char tmp[3], phase;
unsigned char *data;
int len;
- unsigned long timeout;
- unsigned char value;
int err;
- NCR5380_setup(instance);
-
- if (hostdata->selecting)
- goto part2;
-
- hostdata->restart_select = 0;
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
- dprintk(NDEBUG_ARBITRATION, "scsi%d : starting arbitration, id = %d\n", instance->host_no, instance->this_id);
+ dsprintk(NDEBUG_ARBITRATION, instance, "starting arbitration, id = %d\n",
+ instance->this_id);
+
+ /*
+ * Arbitration and selection phases are slow and involve dropping the
+ * lock, so we have to watch out for EH. An exception handler may
+ * change 'selecting' to NULL. This function will then return NULL
+ * so that the caller will forget about 'cmd'. (During information
+ * transfer phases, EH may change 'connected' to NULL.)
+ */
+ hostdata->selecting = cmd;
- /*
- * Set the phase bits to 0, otherwise the NCR5380 won't drive the
+ /*
+ * Set the phase bits to 0, otherwise the NCR5380 won't drive the
* data bus during SELECTION.
*/
NCR5380_write(TARGET_COMMAND_REG, 0);
- /*
+ /*
* Start arbitration.
*/
NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
NCR5380_write(MODE_REG, MR_ARBITRATE);
+ /* The chip now waits for BUS FREE phase. Then after the 800 ns
+ * Bus Free Delay, arbitration will begin.
+ */
- /* We can be relaxed here, interrupts are on, we are
- in workqueue context, the birds are singing in the trees */
- spin_unlock_irq(instance->host_lock);
- err = NCR5380_poll_politely(instance, INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS, ICR_ARBITRATION_PROGRESS, 5*HZ);
- spin_lock_irq(instance->host_lock);
+ spin_unlock_irq(&hostdata->lock);
+ err = NCR5380_poll_politely2(instance, MODE_REG, MR_ARBITRATE, 0,
+ INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS,
+ ICR_ARBITRATION_PROGRESS, HZ);
+ spin_lock_irq(&hostdata->lock);
+ if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
+ /* Reselection interrupt */
+ goto out;
+ }
if (err < 0) {
- printk(KERN_DEBUG "scsi: arbitration timeout at %d\n", __LINE__);
NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- goto failed;
+ shost_printk(KERN_ERR, instance,
+ "select: arbitration timeout\n");
+ goto out;
}
+ spin_unlock_irq(&hostdata->lock);
- dprintk(NDEBUG_ARBITRATION, "scsi%d : arbitration complete\n", instance->host_no);
-
- /*
- * The arbitration delay is 2.2us, but this is a minimum and there is
- * no maximum so we can safely sleep for ceil(2.2) usecs to accommodate
- * the integral nature of udelay().
- *
- */
-
+ /* The SCSI-2 arbitration delay is 2.4 us */
udelay(3);
/* Check for lost arbitration */
- if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) || (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) || (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
- NCR5380_write(MODE_REG, MR_BASE);
- dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting MR_ARBITRATE\n", instance->host_no);
- goto failed;
- }
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_SEL);
-
- if (!(hostdata->flags & FLAG_DTC3181E) &&
- /* RvC: DTC3181E has some trouble with this
- * so we simply removed it. Seems to work with
- * only Mustek scanner attached
- */
+ if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
+ (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) ||
(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- dprintk(NDEBUG_ARBITRATION, "scsi%d : lost arbitration, deasserting ICR_ASSERT_SEL\n", instance->host_no);
- goto failed;
+ dsprintk(NDEBUG_ARBITRATION, instance, "lost arbitration, deasserting MR_ARBITRATE\n");
+ spin_lock_irq(&hostdata->lock);
+ goto out;
}
- /*
- * Again, bus clear + bus settle time is 1.2us, however, this is
+
+ /* After/during arbitration, BSY should be asserted.
+ * IBM DPES-31080 Version S31Q works now
+ * Tnx to Thomas_Roesch@m2.maus.de for finding this! (Roman)
+ */
+ NCR5380_write(INITIATOR_COMMAND_REG,
+ ICR_BASE | ICR_ASSERT_SEL | ICR_ASSERT_BSY);
+
+ /*
+ * Again, bus clear + bus settle time is 1.2us, however, this is
* a minimum so we'll udelay ceil(1.2)
*/
- udelay(2);
+ if (hostdata->flags & FLAG_TOSHIBA_DELAY)
+ udelay(15);
+ else
+ udelay(2);
+
+ spin_lock_irq(&hostdata->lock);
+
+ /* NCR5380_reselect() clears MODE_REG after a reselection interrupt */
+ if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE))
+ goto out;
+
+ if (!hostdata->selecting) {
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ goto out;
+ }
- dprintk(NDEBUG_ARBITRATION, "scsi%d : won arbitration\n", instance->host_no);
+ dsprintk(NDEBUG_ARBITRATION, instance, "won arbitration\n");
- /*
- * Now that we have won arbitration, start Selection process, asserting
+ /*
+ * Now that we have won arbitration, start Selection process, asserting
* the host and target ID's on the SCSI bus.
*/
- NCR5380_write(OUTPUT_DATA_REG, (hostdata->id_mask | (1 << scmd_id(cmd))));
+ NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask | (1 << scmd_id(cmd)));
- /*
+ /*
* Raise ATN while SEL is true before BSY goes false from arbitration,
* since this is the only way to guarantee that we'll get a MESSAGE OUT
* phase immediately after selection.
*/
- NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_BSY | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL));
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY |
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL);
NCR5380_write(MODE_REG, MR_BASE);
- /*
+ /*
* Reselect interrupts must be turned off prior to the dropping of BSY,
* otherwise we will trigger an interrupt.
*/
NCR5380_write(SELECT_ENABLE_REG, 0);
+ spin_unlock_irq(&hostdata->lock);
+
/*
- * The initiator shall then wait at least two deskew delays and release
+ * The initiator shall then wait at least two deskew delays and release
* the BSY signal.
*/
- udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */
+ udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */
/* Reset BSY */
- NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL));
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA |
+ ICR_ASSERT_ATN | ICR_ASSERT_SEL);
- /*
+ /*
* Something weird happens when we cease to drive BSY - looks
- * like the board/chip is letting us do another read before the
+ * like the board/chip is letting us do another read before the
* appropriate propagation delay has expired, and we're confusing
* a BSY signal from ourselves as the target's response to SELECTION.
*
* A small delay (the 'C++' frontend breaks the pipeline with an
* unnecessary jump, making it work on my 386-33/Trantor T128, the
- * tighter 'C' code breaks and requires this) solves the problem -
- * the 1 us delay is arbitrary, and only used because this delay will
- * be the same on other platforms and since it works here, it should
+ * tighter 'C' code breaks and requires this) solves the problem -
+ * the 1 us delay is arbitrary, and only used because this delay will
+ * be the same on other platforms and since it works here, it should
* work there.
*
* wingel suggests that this could be due to failing to wait
@@ -1339,50 +1162,43 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
udelay(1);
- dprintk(NDEBUG_SELECTION, "scsi%d : selecting target %d\n", instance->host_no, scmd_id(cmd));
+ dsprintk(NDEBUG_SELECTION, instance, "selecting target %d\n", scmd_id(cmd));
- /*
- * The SCSI specification calls for a 250 ms timeout for the actual
+ /*
+ * The SCSI specification calls for a 250 ms timeout for the actual
* selection.
*/
- timeout = jiffies + msecs_to_jiffies(250);
-
- /*
- * XXX very interesting - we're seeing a bounce where the BSY we
- * asserted is being reflected / still asserted (propagation delay?)
- * and it's detecting as true. Sigh.
- */
-
- hostdata->select_time = 0; /* we count the clock ticks at which we polled */
- hostdata->selecting = cmd;
+ err = NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, SR_BSY,
+ msecs_to_jiffies(250));
-part2:
- /* RvC: here we enter after a sleeping period, or immediately after
- execution of part 1
- we poll only once ech clock tick */
- value = NCR5380_read(STATUS_REG) & (SR_BSY | SR_IO);
-
- if (!value && (hostdata->select_time < HZ/4)) {
- /* RvC: we still must wait for a device response */
- hostdata->select_time++; /* after 25 ticks the device has failed */
- NCR5380_set_timer(hostdata, 1);
- return 0; /* RvC: we return here with hostdata->selecting set,
- to go to sleep */
- }
-
- hostdata->selecting = NULL;/* clear this pointer, because we passed the
- waiting period */
if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) {
+ spin_lock_irq(&hostdata->lock);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_reselect(instance);
- printk("scsi%d : reselection after won arbitration?\n", instance->host_no);
+ if (!hostdata->connected)
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ shost_printk(KERN_ERR, instance, "reselection after won arbitration?\n");
+ goto out;
+ }
+
+ if (err < 0) {
+ spin_lock_irq(&hostdata->lock);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
+ /* Can't touch cmd if it has been reclaimed by the scsi ML */
+ if (hostdata->selecting) {
+ cmd->result = DID_BAD_TARGET << 16;
+ complete_cmd(instance, cmd);
+ dsprintk(NDEBUG_SELECTION, instance, "target did not respond within 250ms\n");
+ cmd = NULL;
+ }
+ goto out;
}
- /*
- * No less than two deskew delays after the initiator detects the
- * BSY signal is true, it shall release the SEL signal and may
+
+ /*
+ * No less than two deskew delays after the initiator detects the
+ * BSY signal is true, it shall release the SEL signal and may
* change the DATA BUS. -wingel
*/
@@ -1390,53 +1206,38 @@ part2:
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
- if (!(NCR5380_read(STATUS_REG) & SR_BSY)) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- if (hostdata->targets_present & (1 << scmd_id(cmd))) {
- printk(KERN_DEBUG "scsi%d : weirdness\n", instance->host_no);
- if (hostdata->restart_select)
- printk(KERN_DEBUG "\trestart select\n");
- NCR5380_dprint(NDEBUG_SELECTION, instance);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
- }
- cmd->result = DID_BAD_TARGET << 16;
- cmd->scsi_done(cmd);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n", instance->host_no);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return 0;
- }
- hostdata->targets_present |= (1 << scmd_id(cmd));
-
/*
- * Since we followed the SCSI spec, and raised ATN while SEL
+ * Since we followed the SCSI spec, and raised ATN while SEL
* was true but before BSY was false during selection, the information
* transfer phase should be a MESSAGE OUT phase so that we can send the
* IDENTIFY message.
- *
+ *
* If SCSI-II tagged queuing is enabled, we also send a SIMPLE_QUEUE_TAG
* message (2 bytes) with a tag ID that we increment with every command
* until it wraps back to 0.
*
* XXX - it turns out that there are some broken SCSI-II devices,
- * which claim to support tagged queuing but fail when more than
- * some number of commands are issued at once.
+ * which claim to support tagged queuing but fail when more than
+ * some number of commands are issued at once.
*/
/* Wait for start of REQ/ACK handshake */
- spin_unlock_irq(instance->host_lock);
err = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
- spin_lock_irq(instance->host_lock);
-
- if(err) {
- printk(KERN_ERR "scsi%d: timeout at NCR5380.c:%d\n", instance->host_no, __LINE__);
+ spin_lock_irq(&hostdata->lock);
+ if (err < 0) {
+ shost_printk(KERN_ERR, instance, "select: REQ timeout\n");
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- goto failed;
+ goto out;
+ }
+ if (!hostdata->selecting) {
+ do_abort(instance);
+ goto out;
}
- dprintk(NDEBUG_SELECTION, "scsi%d : target %d selected, going into MESSAGE OUT phase.\n", instance->host_no, cmd->device->id);
+ dsprintk(NDEBUG_SELECTION, instance, "target %d selected, going into MESSAGE OUT phase.\n",
+ scmd_id(cmd));
tmp[0] = IDENTIFY(((instance->irq == NO_IRQ) ? 0 : 1), cmd->device->lun);
len = 1;
@@ -1446,104 +1247,82 @@ part2:
data = tmp;
phase = PHASE_MSGOUT;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_SELECTION, "scsi%d : nexus established.\n", instance->host_no);
+ dsprintk(NDEBUG_SELECTION, instance, "nexus established.\n");
/* XXX need to handle errors here */
+
hostdata->connected = cmd;
- hostdata->busy[cmd->device->id] |= (1 << (cmd->device->lun & 0xFF));
+ hostdata->busy[cmd->device->id] |= 1 << cmd->device->lun;
initialize_SCp(cmd);
- return 0;
-
- /* Selection failed */
-failed:
- return -1;
+ cmd = NULL;
+out:
+ if (!hostdata->selecting)
+ return NULL;
+ hostdata->selecting = NULL;
+ return cmd;
}
-/*
- * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance,
- * unsigned char *phase, int *count, unsigned char **data)
+/*
+ * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance,
+ * unsigned char *phase, int *count, unsigned char **data)
*
* Purpose : transfers data in given phase using polled I/O
*
- * Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
- * bytes to transfer, **data - pointer to data pointer.
- *
+ * Inputs : instance - instance of driver, *phase - pointer to
+ * what phase is expected, *count - pointer to number of
+ * bytes to transfer, **data - pointer to data pointer.
+ *
* Returns : -1 when different phase is entered without transferring
- * maximum number of bytes, 0 if all bytes or transferred or exit
- * is in same phase.
+ * maximum number of bytes, 0 if all bytes are transferred or exit
+ * is in same phase.
*
- * Also, *phase, *count, *data are modified in place.
+ * Also, *phase, *count, *data are modified in place.
*
* XXX Note : handling for bus free may be useful.
*/
/*
- * Note : this code is not as quick as it could be, however it
+ * Note : this code is not as quick as it could be, however it
* IS 100% reliable, and for the actual data transfer where speed
* counts, we will always do a pseudo DMA or DMA transfer.
*/
-static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) {
- NCR5380_local_declare();
+static int NCR5380_transfer_pio(struct Scsi_Host *instance,
+ unsigned char *phase, int *count,
+ unsigned char **data)
+{
unsigned char p = *phase, tmp;
int c = *count;
unsigned char *d = *data;
- /*
- * RvC: some administrative data to process polling time
- */
- int break_allowed = 0;
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
- NCR5380_setup(instance);
-
- if (!(p & SR_IO))
- dprintk(NDEBUG_PIO, "scsi%d : pio write %d bytes\n", instance->host_no, c);
- else
- dprintk(NDEBUG_PIO, "scsi%d : pio read %d bytes\n", instance->host_no, c);
- /*
- * The NCR5380 chip will only drive the SCSI bus when the
+ /*
+ * The NCR5380 chip will only drive the SCSI bus when the
* phase specified in the appropriate bits of the TARGET COMMAND
* REGISTER match the STATUS REGISTER
*/
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
+ NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
- /* RvC: don't know if this is necessary, but other SCSI I/O is short
- * so breaks are not necessary there
- */
- if ((p == PHASE_DATAIN) || (p == PHASE_DATAOUT)) {
- break_allowed = 1;
- }
do {
- /*
- * Wait for assertion of REQ, after which the phase bits will be
- * valid
- */
-
- /* RvC: we simply poll once, after that we stop temporarily
- * and let the device buffer fill up
- * if breaking is not allowed, we keep polling as long as needed
+ /*
+ * Wait for assertion of REQ, after which the phase bits will be
+ * valid
*/
- /* FIXME */
- while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ) && !break_allowed);
- if (!(tmp & SR_REQ)) {
- /* timeout condition */
- NCR5380_set_timer(hostdata, USLEEP_SLEEP);
+ if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0)
break;
- }
- dprintk(NDEBUG_HANDSHAKE, "scsi%d : REQ detected\n", instance->host_no);
+ dsprintk(NDEBUG_HANDSHAKE, instance, "REQ asserted\n");
/* Check for phase mismatch */
- if ((tmp & PHASE_MASK) != p) {
- dprintk(NDEBUG_HANDSHAKE, "scsi%d : phase mismatch\n", instance->host_no);
- NCR5380_dprint_phase(NDEBUG_HANDSHAKE, instance);
+ if ((NCR5380_read(STATUS_REG) & PHASE_MASK) != p) {
+ dsprintk(NDEBUG_PIO, instance, "phase mismatch\n");
+ NCR5380_dprint_phase(NDEBUG_PIO, instance);
break;
}
+
/* Do actual transfer from SCSI bus to / from memory */
if (!(p & SR_IO))
NCR5380_write(OUTPUT_DATA_REG, *d);
@@ -1552,7 +1331,7 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase
++d;
- /*
+ /*
* The SCSI standard suggests that in MSGOUT phase, the initiator
* should drop ATN on the last byte of the message phase
* after REQ has been asserted for the handshake but before
@@ -1563,29 +1342,34 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase
if (!((p & SR_MSG) && c > 1)) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA);
NCR5380_dprint(NDEBUG_PIO, instance);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ACK);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
+ ICR_ASSERT_DATA | ICR_ASSERT_ACK);
} else {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN);
NCR5380_dprint(NDEBUG_PIO, instance);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
}
} else {
NCR5380_dprint(NDEBUG_PIO, instance);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
}
- /* FIXME - if this fails bus reset ?? */
- NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 5*HZ);
- dprintk(NDEBUG_HANDSHAKE, "scsi%d : req false, handshake complete\n", instance->host_no);
+ if (NCR5380_poll_politely(instance,
+ STATUS_REG, SR_REQ, 0, 5 * HZ) < 0)
+ break;
+
+ dsprintk(NDEBUG_HANDSHAKE, instance, "REQ negated, handshake complete\n");
/*
- * We have several special cases to consider during REQ/ACK handshaking :
- * 1. We were in MSGOUT phase, and we are on the last byte of the
- * message. ATN must be dropped as ACK is dropped.
+ * We have several special cases to consider during REQ/ACK handshaking :
+ * 1. We were in MSGOUT phase, and we are on the last byte of the
+ * message. ATN must be dropped as ACK is dropped.
*
- * 2. We are in a MSGIN phase, and we are on the last byte of the
- * message. We must exit with ACK asserted, so that the calling
- * code may raise ATN before dropping ACK to reject the message.
+ * 2. We are in a MSGIN phase, and we are on the last byte of the
+ * message. We must exit with ACK asserted, so that the calling
+ * code may raise ATN before dropping ACK to reject the message.
*
* 3. ACK and ATN are clear and the target may proceed as normal.
*/
@@ -1597,12 +1381,16 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase
}
} while (--c);
- dprintk(NDEBUG_PIO, "scsi%d : residual %d\n", instance->host_no, c);
+ dsprintk(NDEBUG_PIO, instance, "residual %d\n", c);
*count = c;
*data = d;
tmp = NCR5380_read(STATUS_REG);
- if (tmp & SR_REQ)
+ /* The phase read from the bus is valid if either REQ is (already)
+ * asserted or if ACK hasn't been released yet. The latter applies if
+ * we're in MSG IN, DATA IN or STATUS and all bytes have been received.
+ */
+ if ((tmp & SR_REQ) || ((tmp & SR_IO) && c == 0))
*phase = tmp & PHASE_MASK;
else
*phase = PHASE_UNKNOWN;
@@ -1614,79 +1402,80 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance, unsigned char *phase
}
/**
- * do_reset - issue a reset command
- * @host: adapter to reset
+ * do_reset - issue a reset command
+ * @instance: adapter to reset
*
- * Issue a reset sequence to the NCR5380 and try and get the bus
- * back into sane shape.
+ * Issue a reset sequence to the NCR5380 and try and get the bus
+ * back into sane shape.
*
- * Locks: caller holds queue lock
+ * This clears the reset interrupt flag because there may be no handler for
+ * it. When the driver is initialized, the NCR5380_intr() handler has not yet
+ * been installed. And when in EH we may have released the ST DMA interrupt.
*/
-
-static void do_reset(struct Scsi_Host *host) {
- NCR5380_local_declare();
- NCR5380_setup(host);
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
+static void do_reset(struct Scsi_Host *instance)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ NCR5380_write(TARGET_COMMAND_REG,
+ PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
- udelay(25);
+ udelay(50);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ local_irq_restore(flags);
}
-/*
- * Function : do_abort (Scsi_Host *host)
- *
- * Purpose : abort the currently established nexus. Should only be
- * called from a routine which can drop into a
- *
- * Returns : 0 on success, -1 on failure.
- *
- * Locks: queue lock held by caller
- * FIXME: sort this out and get new_eh running
+/**
+ * do_abort - abort the currently established nexus by going to
+ * MESSAGE OUT phase and sending an ABORT message.
+ * @instance: relevant scsi host instance
+ *
+ * Returns 0 on success, -1 on failure.
*/
-static int do_abort(struct Scsi_Host *host) {
- NCR5380_local_declare();
+static int do_abort(struct Scsi_Host *instance)
+{
unsigned char *msgptr, phase, tmp;
int len;
int rc;
- NCR5380_setup(host);
-
/* Request message out phase */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
- /*
- * Wait for the target to indicate a valid phase by asserting
- * REQ. Once this happens, we'll have either a MSGOUT phase
- * and can immediately send the ABORT message, or we'll have some
+ /*
+ * Wait for the target to indicate a valid phase by asserting
+ * REQ. Once this happens, we'll have either a MSGOUT phase
+ * and can immediately send the ABORT message, or we'll have some
* other phase and will have to source/sink data.
- *
+ *
* We really don't care what value was on the bus or what value
* the target sees, so we just handshake.
*/
- rc = NCR5380_poll_politely(host, STATUS_REG, SR_REQ, SR_REQ, 60 * HZ);
-
- if(rc < 0)
- return -1;
+ rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 10 * HZ);
+ if (rc < 0)
+ goto timeout;
+
+ tmp = NCR5380_read(STATUS_REG) & PHASE_MASK;
- tmp = (unsigned char)rc;
-
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
- if ((tmp & PHASE_MASK) != PHASE_MSGOUT) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
- rc = NCR5380_poll_politely(host, STATUS_REG, SR_REQ, 0, 3*HZ);
+ if (tmp != PHASE_MSGOUT) {
+ NCR5380_write(INITIATOR_COMMAND_REG,
+ ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
+ rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ);
+ if (rc < 0)
+ goto timeout;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
- if(rc == -1)
- return -1;
}
+
tmp = ABORT;
msgptr = &tmp;
len = 1;
phase = PHASE_MSGOUT;
- NCR5380_transfer_pio(host, &phase, &len, &msgptr);
+ NCR5380_transfer_pio(instance, &phase, &len, &msgptr);
/*
* If we got here, and the command completed successfully,
@@ -1694,32 +1483,37 @@ static int do_abort(struct Scsi_Host *host) {
*/
return len ? -1 : 0;
+
+timeout:
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ return -1;
}
#if defined(REAL_DMA) || defined(PSEUDO_DMA) || defined (REAL_DMA_POLL)
-/*
- * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
- * unsigned char *phase, int *count, unsigned char **data)
+/*
+ * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
+ * unsigned char *phase, int *count, unsigned char **data)
*
* Purpose : transfers data in given phase using either real
- * or pseudo DMA.
+ * or pseudo DMA.
*
- * Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
- * bytes to transfer, **data - pointer to data pointer.
- *
- * Returns : -1 when different phase is entered without transferring
- * maximum number of bytes, 0 if all bytes or transferred or exit
- * is in same phase.
+ * Inputs : instance - instance of driver, *phase - pointer to
+ * what phase is expected, *count - pointer to number of
+ * bytes to transfer, **data - pointer to data pointer.
*
- * Also, *phase, *count, *data are modified in place.
+ * Returns : -1 when different phase is entered without transferring
+ * maximum number of bytes, 0 if all bytes or transferred or exit
+ * is in same phase.
*
- * Locks: io_request lock held by caller
+ * Also, *phase, *count, *data are modified in place.
*/
-static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data) {
- NCR5380_local_declare();
+static int NCR5380_transfer_dma(struct Scsi_Host *instance,
+ unsigned char *phase, int *count,
+ unsigned char **data)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
register int c = *count;
register unsigned char p = *phase;
register unsigned char *d = *data;
@@ -1730,54 +1524,47 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase
unsigned char saved_data = 0, overrun = 0, residue;
#endif
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
-
- NCR5380_setup(instance);
-
if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) {
*phase = tmp;
return -1;
}
#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
-#ifdef READ_OVERRUNS
if (p & SR_IO) {
- c -= 2;
+ if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS))
+ c -= 2;
}
-#endif
- dprintk(NDEBUG_DMA, "scsi%d : initializing DMA channel %d for %s, %d bytes %s %0x\n", instance->host_no, instance->dma_channel, (p & SR_IO) ? "reading" : "writing", c, (p & SR_IO) ? "to" : "from", (unsigned) d);
hostdata->dma_len = (p & SR_IO) ? NCR5380_dma_read_setup(instance, d, c) : NCR5380_dma_write_setup(instance, d, c);
+
+ dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n",
+ (p & SR_IO) ? "receive" : "send", c, *data);
#endif
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
#ifdef REAL_DMA
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_EOP_INTR | MR_MONITOR_BSY);
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
+ MR_ENABLE_EOP_INTR);
#elif defined(REAL_DMA_POLL)
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE);
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY);
#else
/*
* Note : on my sample board, watch-dog timeouts occurred when interrupts
- * were not disabled for the duration of a single DMA transfer, from
+ * were not disabled for the duration of a single DMA transfer, from
* before the setting of DMA mode to after transfer of the last byte.
*/
-#if defined(PSEUDO_DMA) && defined(UNSAFE)
- spin_unlock_irq(instance->host_lock);
-#endif
- /* KLL May need eop and parity in 53c400 */
- if (hostdata->flags & FLAG_NCR53C400)
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE |
- MR_ENABLE_PAR_CHECK | MR_ENABLE_PAR_INTR |
- MR_ENABLE_EOP_INTR | MR_MONITOR_BSY);
+ if (hostdata->flags & FLAG_NO_DMA_FIXUP)
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
+ MR_ENABLE_EOP_INTR);
else
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE);
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY);
#endif /* def REAL_DMA */
dprintk(NDEBUG_DMA, "scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG));
- /*
- * On the PAS16 at least I/O recovery delays are not needed here.
- * Everyone else seems to want them.
+ /*
+ * On the PAS16 at least I/O recovery delays are not needed here.
+ * Everyone else seems to want them.
*/
if (p & SR_IO) {
@@ -1797,49 +1584,49 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase
} while ((tmp & BASR_PHASE_MATCH) && !(tmp & (BASR_BUSY_ERROR | BASR_END_DMA_TRANSFER)));
/*
- At this point, either we've completed DMA, or we have a phase mismatch,
- or we've unexpectedly lost BUSY (which is a real error).
-
- For write DMAs, we want to wait until the last byte has been
- transferred out over the bus before we turn off DMA mode. Alas, there
- seems to be no terribly good way of doing this on a 5380 under all
- conditions. For non-scatter-gather operations, we can wait until REQ
- and ACK both go false, or until a phase mismatch occurs. Gather-writes
- are nastier, since the device will be expecting more data than we
- are prepared to send it, and REQ will remain asserted. On a 53C8[01] we
- could test LAST BIT SENT to assure transfer (I imagine this is precisely
- why this signal was added to the newer chips) but on the older 538[01]
- this signal does not exist. The workaround for this lack is a watchdog;
- we bail out of the wait-loop after a modest amount of wait-time if
- the usual exit conditions are not met. Not a terribly clean or
- correct solution :-%
-
- Reads are equally tricky due to a nasty characteristic of the NCR5380.
- If the chip is in DMA mode for an READ, it will respond to a target's
- REQ by latching the SCSI data into the INPUT DATA register and asserting
- ACK, even if it has _already_ been notified by the DMA controller that
- the current DMA transfer has completed! If the NCR5380 is then taken
- out of DMA mode, this already-acknowledged byte is lost.
-
- This is not a problem for "one DMA transfer per command" reads, because
- the situation will never arise... either all of the data is DMA'ed
- properly, or the target switches to MESSAGE IN phase to signal a
- disconnection (either operation bringing the DMA to a clean halt).
- However, in order to handle scatter-reads, we must work around the
- problem. The chosen fix is to DMA N-2 bytes, then check for the
- condition before taking the NCR5380 out of DMA mode. One or two extra
- bytes are transferred via PIO as necessary to fill out the original
- request.
+ * At this point, either we've completed DMA, or we have a phase mismatch,
+ * or we've unexpectedly lost BUSY (which is a real error).
+ *
+ * For DMA sends, we want to wait until the last byte has been
+ * transferred out over the bus before we turn off DMA mode. Alas, there
+ * seems to be no terribly good way of doing this on a 5380 under all
+ * conditions. For non-scatter-gather operations, we can wait until REQ
+ * and ACK both go false, or until a phase mismatch occurs. Gather-sends
+ * are nastier, since the device will be expecting more data than we
+ * are prepared to send it, and REQ will remain asserted. On a 53C8[01] we
+ * could test Last Byte Sent to assure transfer (I imagine this is precisely
+ * why this signal was added to the newer chips) but on the older 538[01]
+ * this signal does not exist. The workaround for this lack is a watchdog;
+ * we bail out of the wait-loop after a modest amount of wait-time if
+ * the usual exit conditions are not met. Not a terribly clean or
+ * correct solution :-%
+ *
+ * DMA receive is equally tricky due to a nasty characteristic of the NCR5380.
+ * If the chip is in DMA receive mode, it will respond to a target's
+ * REQ by latching the SCSI data into the INPUT DATA register and asserting
+ * ACK, even if it has _already_ been notified by the DMA controller that
+ * the current DMA transfer has completed! If the NCR5380 is then taken
+ * out of DMA mode, this already-acknowledged byte is lost. This is
+ * not a problem for "one DMA transfer per READ command", because
+ * the situation will never arise... either all of the data is DMA'ed
+ * properly, or the target switches to MESSAGE IN phase to signal a
+ * disconnection (either operation bringing the DMA to a clean halt).
+ * However, in order to handle scatter-receive, we must work around the
+ * problem. The chosen fix is to DMA N-2 bytes, then check for the
+ * condition before taking the NCR5380 out of DMA mode. One or two extra
+ * bytes are transferred via PIO as necessary to fill out the original
+ * request.
*/
if (p & SR_IO) {
-#ifdef READ_OVERRUNS
- udelay(10);
- if (((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) == (BASR_PHASE_MATCH | BASR_ACK))) {
- saved_data = NCR5380_read(INPUT_DATA_REGISTER);
- overrun = 1;
+ if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS)) {
+ udelay(10);
+ if ((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) ==
+ (BASR_PHASE_MATCH | BASR_ACK)) {
+ saved_data = NCR5380_read(INPUT_DATA_REGISTER);
+ overrun = 1;
+ }
}
-#endif
} else {
int limit = 100;
while (((tmp = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_ACK) || (NCR5380_read(STATUS_REG) & SR_REQ)) {
@@ -1850,7 +1637,8 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase
}
}
- dprintk(NDEBUG_DMA, "scsi%d : polled DMA transfer complete, basr 0x%X, sr 0x%X\n", instance->host_no, tmp, NCR5380_read(STATUS_REG));
+ dsprintk(NDEBUG_DMA, "polled DMA transfer complete, basr 0x%02x, sr 0x%02x\n",
+ tmp, NCR5380_read(STATUS_REG));
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
@@ -1861,8 +1649,8 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase
*data += c;
*phase = NCR5380_read(STATUS_REG) & PHASE_MASK;
-#ifdef READ_OVERRUNS
- if (*phase == p && (p & SR_IO) && residue == 0) {
+ if (!(hostdata->flags & FLAG_NO_DMA_FIXUPS) &&
+ *phase == p && (p & SR_IO) && residue == 0) {
if (overrun) {
dprintk(NDEBUG_DMA, "Got an input overrun, using saved byte\n");
**data = saved_data;
@@ -1877,7 +1665,6 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase
NCR5380_transfer_pio(instance, phase, &cnt, data);
*count -= toPIO - cnt;
}
-#endif
dprintk(NDEBUG_DMA, "Return with data ptr = 0x%X, count %d, last 0x%X, next 0x%X\n", *data, *count, *(*data + *count - 1), *(*data + *count));
return 0;
@@ -1886,95 +1673,64 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase
return 0;
#else /* defined(REAL_DMA_POLL) */
if (p & SR_IO) {
-#ifdef DMA_WORKS_RIGHT
- foo = NCR5380_pread(instance, d, c);
-#else
- int diff = 1;
- if (hostdata->flags & FLAG_NCR53C400) {
- diff = 0;
- }
- if (!(foo = NCR5380_pread(instance, d, c - diff))) {
+ foo = NCR5380_pread(instance, d,
+ hostdata->flags & FLAG_NO_DMA_FIXUP ? c : c - 1);
+ if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
/*
- * We can't disable DMA mode after successfully transferring
+ * We can't disable DMA mode after successfully transferring
* what we plan to be the last byte, since that would open up
- * a race condition where if the target asserted REQ before
+ * a race condition where if the target asserted REQ before
* we got the DMA mode reset, the NCR5380 would have latched
* an additional byte into the INPUT DATA register and we'd
* have dropped it.
- *
- * The workaround was to transfer one fewer bytes than we
- * intended to with the pseudo-DMA read function, wait for
+ *
+ * The workaround was to transfer one fewer bytes than we
+ * intended to with the pseudo-DMA read function, wait for
* the chip to latch the last byte, read it, and then disable
* pseudo-DMA mode.
- *
+ *
* After REQ is asserted, the NCR5380 asserts DRQ and ACK.
* REQ is deasserted when ACK is asserted, and not reasserted
* until ACK goes false. Since the NCR5380 won't lower ACK
* until DACK is asserted, which won't happen unless we twiddle
- * the DMA port or we take the NCR5380 out of DMA mode, we
- * can guarantee that we won't handshake another extra
+ * the DMA port or we take the NCR5380 out of DMA mode, we
+ * can guarantee that we won't handshake another extra
* byte.
*/
- if (!(hostdata->flags & FLAG_NCR53C400)) {
- while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ));
- /* Wait for clean handshake */
- while (NCR5380_read(STATUS_REG) & SR_REQ);
- d[c - 1] = NCR5380_read(INPUT_DATA_REG);
+ if (NCR5380_poll_politely(instance, BUS_AND_STATUS_REG,
+ BASR_DRQ, BASR_DRQ, HZ) < 0) {
+ foo = -1;
+ shost_printk(KERN_ERR, instance, "PDMA read: DRQ timeout\n");
+ }
+ if (NCR5380_poll_politely(instance, STATUS_REG,
+ SR_REQ, 0, HZ) < 0) {
+ foo = -1;
+ shost_printk(KERN_ERR, instance, "PDMA read: !REQ timeout\n");
}
+ d[c - 1] = NCR5380_read(INPUT_DATA_REG);
}
-#endif
} else {
-#ifdef DMA_WORKS_RIGHT
foo = NCR5380_pwrite(instance, d, c);
-#else
- int timeout;
- dprintk(NDEBUG_C400_PWRITE, "About to pwrite %d bytes\n", c);
- if (!(foo = NCR5380_pwrite(instance, d, c))) {
+ if (!foo && !(hostdata->flags & FLAG_NO_DMA_FIXUP)) {
/*
- * Wait for the last byte to be sent. If REQ is being asserted for
- * the byte we're interested, we'll ACK it and it will go false.
+ * Wait for the last byte to be sent. If REQ is being asserted for
+ * the byte we're interested, we'll ACK it and it will go false.
*/
- if (!(hostdata->flags & FLAG_HAS_LAST_BYTE_SENT)) {
- timeout = 20000;
- while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) && (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH));
-
- if (!timeout)
- dprintk(NDEBUG_LAST_BYTE_SENT, "scsi%d : timed out on last byte\n", instance->host_no);
-
- if (hostdata->flags & FLAG_CHECK_LAST_BYTE_SENT) {
- hostdata->flags &= ~FLAG_CHECK_LAST_BYTE_SENT;
- if (NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT) {
- hostdata->flags |= FLAG_HAS_LAST_BYTE_SENT;
- dprintk(NDEBUG_LAST_BYTE_SENT, "scsi%d : last byte sent works\n", instance->host_no);
- }
- }
- } else {
- dprintk(NDEBUG_C400_PWRITE, "Waiting for LASTBYTE\n");
- while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT));
- dprintk(NDEBUG_C400_PWRITE, "Got LASTBYTE\n");
+ if (NCR5380_poll_politely2(instance,
+ BUS_AND_STATUS_REG, BASR_DRQ, BASR_DRQ,
+ BUS_AND_STATUS_REG, BASR_PHASE_MATCH, 0, HZ) < 0) {
+ foo = -1;
+ shost_printk(KERN_ERR, instance, "PDMA write: DRQ and phase timeout\n");
}
}
-#endif
}
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- if ((!(p & SR_IO)) && (hostdata->flags & FLAG_NCR53C400)) {
- dprintk(NDEBUG_C400_PWRITE, "53C400w: Checking for IRQ\n");
- if (NCR5380_read(BUS_AND_STATUS_REG) & BASR_IRQ) {
- dprintk(NDEBUG_C400_PWRITE, "53C400w: got it, reading reset interrupt reg\n");
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- } else {
- printk("53C400w: IRQ NOT THERE!\n");
- }
- }
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
*data = d + c;
*count = 0;
*phase = NCR5380_read(STATUS_REG) & PHASE_MASK;
-#if defined(PSEUDO_DMA) && defined(UNSAFE)
- spin_lock_irq(instance->host_lock);
-#endif /* defined(REAL_DMA_POLL) */
return foo;
#endif /* def REAL_DMA */
}
@@ -1983,25 +1739,23 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase
/*
* Function : NCR5380_information_transfer (struct Scsi_Host *instance)
*
- * Purpose : run through the various SCSI phases and do as the target
- * directs us to. Operates on the currently connected command,
- * instance->connected.
+ * Purpose : run through the various SCSI phases and do as the target
+ * directs us to. Operates on the currently connected command,
+ * instance->connected.
*
* Inputs : instance, instance for which we are doing commands
*
- * Side effects : SCSI things happen, the disconnected queue will be
- * modified if a command disconnects, *instance->connected will
- * change.
- *
- * XXX Note : we need to watch for bus free or a reset condition here
- * to recover from an unexpected bus free condition.
+ * Side effects : SCSI things happen, the disconnected queue will be
+ * modified if a command disconnects, *instance->connected will
+ * change.
*
- * Locks: io_request_lock held by caller in IRQ mode
+ * XXX Note : we need to watch for bus free or a reset condition here
+ * to recover from an unexpected bus free condition.
*/
-static void NCR5380_information_transfer(struct Scsi_Host *instance) {
- NCR5380_local_declare();
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *)instance->hostdata;
+static void NCR5380_information_transfer(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char msgout = NOP;
int sink = 0;
int len;
@@ -2010,13 +1764,11 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
#endif
unsigned char *data;
unsigned char phase, tmp, extended_msg[10], old_phase = 0xff;
- struct scsi_cmnd *cmd = (struct scsi_cmnd *) hostdata->connected;
- /* RvC: we need to set the end of the polling time */
- unsigned long poll_time = jiffies + USLEEP_POLL;
+ struct scsi_cmnd *cmd;
- NCR5380_setup(instance);
+ while ((cmd = hostdata->connected)) {
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
- while (1) {
tmp = NCR5380_read(STATUS_REG);
/* We only have a valid SCSI phase when REQ is asserted */
if (tmp & SR_REQ) {
@@ -2028,24 +1780,28 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
if (sink && (phase != PHASE_MSGOUT)) {
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
- while (NCR5380_read(STATUS_REG) & SR_REQ);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN |
+ ICR_ASSERT_ACK);
+ while (NCR5380_read(STATUS_REG) & SR_REQ)
+ ;
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
+ ICR_ASSERT_ATN);
sink = 0;
continue;
}
+
switch (phase) {
- case PHASE_DATAIN:
case PHASE_DATAOUT:
#if (NDEBUG & NDEBUG_NO_DATAOUT)
- printk("scsi%d : NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n", instance->host_no);
+ shost_printk(KERN_DEBUG, instance, "NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n");
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
return;
#endif
- /*
+ case PHASE_DATAIN:
+ /*
* If there is no room left in the current buffer in the
* scatter-gather list, move onto the next one.
*/
@@ -2055,10 +1811,13 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
--cmd->SCp.buffers_residual;
cmd->SCp.this_residual = cmd->SCp.buffer->length;
cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
- dprintk(NDEBUG_INFORMATION, "scsi%d : %d bytes and %d buffers left\n", instance->host_no, cmd->SCp.this_residual, cmd->SCp.buffers_residual);
+ dsprintk(NDEBUG_INFORMATION, instance, "%d bytes and %d buffers left\n",
+ cmd->SCp.this_residual,
+ cmd->SCp.buffers_residual);
}
+
/*
- * The preferred transfer method is going to be
+ * The preferred transfer method is going to be
* PSEUDO-DMA for systems that are strictly PIO,
* since we can let the hardware do the handshaking.
*
@@ -2068,50 +1827,39 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
*/
#if defined(PSEUDO_DMA) || defined(REAL_DMA_POLL)
- /* KLL
- * PSEUDO_DMA is defined here. If this is the g_NCR5380
- * driver then it will always be defined, so the
- * FLAG_NO_PSEUDO_DMA is used to inhibit PDMA in the base
- * NCR5380 case. I think this is a fairly clean solution.
- * We supplement these 2 if's with the flag.
- */
-#ifdef NCR5380_dma_xfer_len
- if (!cmd->device->borken && !(hostdata->flags & FLAG_NO_PSEUDO_DMA) && (transfersize = NCR5380_dma_xfer_len(instance, cmd)) != 0) {
-#else
- transfersize = cmd->transfersize;
-
-#ifdef LIMIT_TRANSFERSIZE /* If we have problems with interrupt service */
- if (transfersize > 512)
- transfersize = 512;
-#endif /* LIMIT_TRANSFERSIZE */
-
- if (!cmd->device->borken && transfersize && !(hostdata->flags & FLAG_NO_PSEUDO_DMA) && cmd->SCp.this_residual && !(cmd->SCp.this_residual % transfersize)) {
- /* Limit transfers to 32K, for xx400 & xx406
- * pseudoDMA that transfers in 128 bytes blocks. */
- if (transfersize > 32 * 1024)
- transfersize = 32 * 1024;
-#endif
+ transfersize = 0;
+ if (!cmd->device->borken &&
+ !(hostdata->flags & FLAG_NO_PSEUDO_DMA))
+ transfersize = NCR5380_dma_xfer_len(instance, cmd, phase);
+
+ if (transfersize) {
len = transfersize;
- if (NCR5380_transfer_dma(instance, &phase, &len, (unsigned char **) &cmd->SCp.ptr)) {
+ if (NCR5380_transfer_dma(instance, &phase,
+ &len, (unsigned char **)&cmd->SCp.ptr)) {
/*
- * If the watchdog timer fires, all future accesses to this
- * device will use the polled-IO.
+ * If the watchdog timer fires, all future
+ * accesses to this device will use the
+ * polled-IO.
*/
scmd_printk(KERN_INFO, cmd,
- "switching to slow handshake\n");
+ "switching to slow handshake\n");
cmd->device->borken = 1;
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
/* XXX - need to source or sink data here, as appropriate */
} else
cmd->SCp.this_residual -= transfersize - len;
} else
#endif /* defined(PSEUDO_DMA) || defined(REAL_DMA_POLL) */
- NCR5380_transfer_pio(instance, &phase, (int *) &cmd->SCp.this_residual, (unsigned char **)
- &cmd->SCp.ptr);
+ {
+ spin_unlock_irq(&hostdata->lock);
+ NCR5380_transfer_pio(instance, &phase,
+ (int *)&cmd->SCp.this_residual,
+ (unsigned char **)&cmd->SCp.ptr);
+ spin_lock_irq(&hostdata->lock);
+ }
break;
case PHASE_MSGIN:
len = 1;
@@ -2120,101 +1868,42 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
cmd->SCp.Message = tmp;
switch (tmp) {
- /*
- * Linking lets us reduce the time required to get the
- * next command out to the device, hopefully this will
- * mean we don't waste another revolution due to the delays
- * required by ARBITRATION and another SELECTION.
- *
- * In the current implementation proposal, low level drivers
- * merely have to start the next command, pointed to by
- * next_link, done() is called as with unlinked commands.
- */
-#ifdef LINKED
- case LINKED_CMD_COMPLETE:
- case LINKED_FLG_CMD_COMPLETE:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- dprintk(NDEBUG_LINKED, "scsi%d : target %d lun %llu linked command complete.\n", instance->host_no, cmd->device->id, cmd->device->lun);
- /*
- * Sanity check : A linked command should only terminate with
- * one of these messages if there are more linked commands
- * available.
- */
- if (!cmd->next_link) {
- printk("scsi%d : target %d lun %llu linked command complete, no next_link\n" instance->host_no, cmd->device->id, cmd->device->lun);
- sink = 1;
- do_abort(instance);
- return;
- }
- initialize_SCp(cmd->next_link);
- /* The next command is still part of this process */
- cmd->next_link->tag = cmd->tag;
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- dprintk(NDEBUG_LINKED, "scsi%d : target %d lun %llu linked request done, calling scsi_done().\n", instance->host_no, cmd->device->id, cmd->device->lun);
- cmd->scsi_done(cmd);
- cmd = hostdata->connected;
- break;
-#endif /* def LINKED */
case ABORT:
case COMMAND_COMPLETE:
/* Accept message by clearing ACK */
sink = 1;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- hostdata->connected = NULL;
- dprintk(NDEBUG_QUEUES, "scsi%d : command for target %d, lun %llu completed\n", instance->host_no, cmd->device->id, cmd->device->lun);
- hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF));
-
- /*
- * I'm not sure what the correct thing to do here is :
- *
- * If the command that just executed is NOT a request
- * sense, the obvious thing to do is to set the result
- * code to the values of the stored parameters.
- *
- * If it was a REQUEST SENSE command, we need some way
- * to differentiate between the failure code of the original
- * and the failure code of the REQUEST sense - the obvious
- * case is success, where we fall through and leave the result
- * code unchanged.
- *
- * The non-obvious place is where the REQUEST SENSE failed
- */
-
- if (cmd->cmnd[0] != REQUEST_SENSE)
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- else if (status_byte(cmd->SCp.Status) != GOOD)
- cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16);
+ dsprintk(NDEBUG_QUEUES, instance,
+ "COMMAND COMPLETE %p target %d lun %llu\n",
+ cmd, scmd_id(cmd), cmd->device->lun);
- if ((cmd->cmnd[0] == REQUEST_SENSE) &&
- hostdata->ses.cmd_len) {
- scsi_eh_restore_cmnd(cmd, &hostdata->ses);
- hostdata->ses.cmd_len = 0 ;
- }
-
- if ((cmd->cmnd[0] != REQUEST_SENSE) && (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
- scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
-
- dprintk(NDEBUG_AUTOSENSE, "scsi%d : performing request sense\n", instance->host_no);
+ hostdata->connected = NULL;
- LIST(cmd, hostdata->issue_queue);
- cmd->host_scribble = (unsigned char *)
- hostdata->issue_queue;
- hostdata->issue_queue = (struct scsi_cmnd *) cmd;
- dprintk(NDEBUG_QUEUES, "scsi%d : REQUEST SENSE added to head of issue queue\n", instance->host_no);
- } else {
- cmd->scsi_done(cmd);
+ cmd->result &= ~0xffff;
+ cmd->result |= cmd->SCp.Status;
+ cmd->result |= cmd->SCp.Message << 8;
+
+ if (cmd->cmnd[0] == REQUEST_SENSE)
+ complete_cmd(instance, cmd);
+ else {
+ if (cmd->SCp.Status == SAM_STAT_CHECK_CONDITION ||
+ cmd->SCp.Status == SAM_STAT_COMMAND_TERMINATED) {
+ dsprintk(NDEBUG_QUEUES, instance, "autosense: adding cmd %p to tail of autosense queue\n",
+ cmd);
+ list_add_tail(&ncmd->list,
+ &hostdata->autosense);
+ } else
+ complete_cmd(instance, cmd);
}
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /*
- * Restore phase bits to 0 so an interrupted selection,
+ /*
+ * Restore phase bits to 0 so an interrupted selection,
* arbitration can resume.
*/
NCR5380_write(TARGET_COMMAND_REG, 0);
- while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
- barrier();
+ /* Enable reselect interrupts */
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
case MESSAGE_REJECT:
/* Accept message by clearing ACK */
@@ -2229,38 +1918,33 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
default:
break;
}
- case DISCONNECT:{
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- cmd->device->disconnect = 1;
- LIST(cmd, hostdata->disconnected_queue);
- cmd->host_scribble = (unsigned char *)
- hostdata->disconnected_queue;
- hostdata->connected = NULL;
- hostdata->disconnected_queue = cmd;
- dprintk(NDEBUG_QUEUES, "scsi%d : command for target %d lun %llu was moved from connected to" " the disconnected_queue\n", instance->host_no, cmd->device->id, cmd->device->lun);
- /*
- * Restore phase bits to 0 so an interrupted selection,
- * arbitration can resume.
- */
- NCR5380_write(TARGET_COMMAND_REG, 0);
-
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /* Wait for bus free to avoid nasty timeouts - FIXME timeout !*/
- /* NCR538_poll_politely(instance, STATUS_REG, SR_BSY, 0, 30 * HZ); */
- while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
- barrier();
- return;
- }
- /*
+ break;
+ case DISCONNECT:
+ /* Accept message by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ hostdata->connected = NULL;
+ list_add(&ncmd->list, &hostdata->disconnected);
+ dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES,
+ instance, "connected command %p for target %d lun %llu moved to disconnected queue\n",
+ cmd, scmd_id(cmd), cmd->device->lun);
+
+ /*
+ * Restore phase bits to 0 so an interrupted selection,
+ * arbitration can resume.
+ */
+ NCR5380_write(TARGET_COMMAND_REG, 0);
+
+ /* Enable reselect interrupts */
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ return;
+ /*
* The SCSI data pointer is *IMPLICITLY* saved on a disconnect
- * operation, in violation of the SCSI spec so we can safely
+ * operation, in violation of the SCSI spec so we can safely
* ignore SAVE/RESTORE pointers calls.
*
- * Unfortunately, some disks violate the SCSI spec and
+ * Unfortunately, some disks violate the SCSI spec and
* don't issue the required SAVE_POINTERS message before
- * disconnecting, and we have to break spec to remain
+ * disconnecting, and we have to break spec to remain
* compatible.
*/
case SAVE_POINTERS:
@@ -2269,31 +1953,28 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
break;
case EXTENDED_MESSAGE:
-/*
- * Extended messages are sent in the following format :
- * Byte
- * 0 EXTENDED_MESSAGE == 1
- * 1 length (includes one byte for code, doesn't
- * include first two bytes)
- * 2 code
- * 3..length+1 arguments
- *
- * Start the extended message buffer with the EXTENDED_MESSAGE
- * byte, since spi_print_msg() wants the whole thing.
- */
+ /*
+ * Start the message buffer with the EXTENDED_MESSAGE
+ * byte, since spi_print_msg() wants the whole thing.
+ */
extended_msg[0] = EXTENDED_MESSAGE;
/* Accept first byte by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- dprintk(NDEBUG_EXTENDED, "scsi%d : receiving extended message\n", instance->host_no);
+
+ spin_unlock_irq(&hostdata->lock);
+
+ dsprintk(NDEBUG_EXTENDED, instance, "receiving extended message\n");
len = 2;
data = extended_msg + 1;
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
+ dsprintk(NDEBUG_EXTENDED, instance, "length %d, code 0x%02x\n",
+ (int)extended_msg[1],
+ (int)extended_msg[2]);
- dprintk(NDEBUG_EXTENDED, "scsi%d : length=%d, code=0x%02x\n", instance->host_no, (int) extended_msg[1], (int) extended_msg[2]);
-
- if (!len && extended_msg[1] <= (sizeof(extended_msg) - 1)) {
+ if (!len && extended_msg[1] > 0 &&
+ extended_msg[1] <= sizeof(extended_msg) - 2) {
/* Accept third byte by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
len = extended_msg[1] - 1;
@@ -2301,7 +1982,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_EXTENDED, "scsi%d : message received, residual %d\n", instance->host_no, len);
+ dsprintk(NDEBUG_EXTENDED, instance, "message received, residual %d\n",
+ len);
switch (extended_msg[2]) {
case EXTENDED_SDTR:
@@ -2311,34 +1993,42 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
tmp = 0;
}
} else if (len) {
- printk("scsi%d: error receiving extended message\n", instance->host_no);
+ shost_printk(KERN_ERR, instance, "error receiving extended message\n");
tmp = 0;
} else {
- printk("scsi%d: extended message code %02x length %d is too long\n", instance->host_no, extended_msg[2], extended_msg[1]);
+ shost_printk(KERN_NOTICE, instance, "extended message code %02x length %d is too long\n",
+ extended_msg[2], extended_msg[1]);
tmp = 0;
}
+
+ spin_lock_irq(&hostdata->lock);
+ if (!hostdata->connected)
+ return;
+
/* Fall through to reject message */
- /*
- * If we get something weird that we aren't expecting,
+ /*
+ * If we get something weird that we aren't expecting,
* reject it.
*/
default:
if (!tmp) {
- printk("scsi%d: rejecting message ", instance->host_no);
+ shost_printk(KERN_ERR, instance, "rejecting message ");
spi_print_msg(extended_msg);
printk("\n");
} else if (tmp != EXTENDED_MESSAGE)
scmd_printk(KERN_INFO, cmd,
- "rejecting unknown message %02x\n",tmp);
+ "rejecting unknown message %02x\n",
+ tmp);
else
scmd_printk(KERN_INFO, cmd,
- "rejecting unknown extended message code %02x, length %d\n", extended_msg[1], extended_msg[0]);
+ "rejecting unknown extended message code %02x, length %d\n",
+ extended_msg[1], extended_msg[0]);
msgout = MESSAGE_REJECT;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
break;
- } /* switch (tmp) */
+ } /* switch (tmp) */
break;
case PHASE_MSGOUT:
len = 1;
@@ -2346,10 +2036,9 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
hostdata->last_message = msgout;
NCR5380_transfer_pio(instance, &phase, &len, &data);
if (msgout == ABORT) {
- hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF));
hostdata->connected = NULL;
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
}
@@ -2358,17 +2047,12 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
case PHASE_CMDOUT:
len = cmd->cmd_len;
data = cmd->cmnd;
- /*
- * XXX for performance reasons, on machines with a
- * PSEUDO-DMA architecture we should probably
- * use the dma transfer function.
+ /*
+ * XXX for performance reasons, on machines with a
+ * PSEUDO-DMA architecture we should probably
+ * use the dma transfer function.
*/
NCR5380_transfer_pio(instance, &phase, &len, &data);
- if (!cmd->device->disconnect && should_disconnect(cmd->cmnd[0])) {
- NCR5380_set_timer(hostdata, USLEEP_SLEEP);
- dprintk(NDEBUG_USLEEP, "scsi%d : issued command, sleeping until %lu\n", instance->host_no, hostdata->time_expires);
- return;
- }
break;
case PHASE_STATIN:
len = 1;
@@ -2377,46 +2061,37 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) {
cmd->SCp.Status = tmp;
break;
default:
- printk("scsi%d : unknown phase\n", instance->host_no);
+ shost_printk(KERN_ERR, instance, "unknown phase\n");
NCR5380_dprint(NDEBUG_ANY, instance);
- } /* switch(phase) */
- } /* if (tmp * SR_REQ) */
- else {
- /* RvC: go to sleep if polling time expired
- */
- if (!cmd->device->disconnect && time_after_eq(jiffies, poll_time)) {
- NCR5380_set_timer(hostdata, USLEEP_SLEEP);
- dprintk(NDEBUG_USLEEP, "scsi%d : poll timed out, sleeping until %lu\n", instance->host_no, hostdata->time_expires);
- return;
- }
+ } /* switch(phase) */
+ } else {
+ spin_unlock_irq(&hostdata->lock);
+ NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
+ spin_lock_irq(&hostdata->lock);
}
- } /* while (1) */
+ }
}
/*
* Function : void NCR5380_reselect (struct Scsi_Host *instance)
*
- * Purpose : does reselection, initializing the instance->connected
- * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
- * nexus has been reestablished,
- *
- * Inputs : instance - this instance of the NCR5380.
+ * Purpose : does reselection, initializing the instance->connected
+ * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
+ * nexus has been reestablished,
*
- * Locks: io_request_lock held by caller if IRQ driven
+ * Inputs : instance - this instance of the NCR5380.
*/
-static void NCR5380_reselect(struct Scsi_Host *instance) {
- NCR5380_local_declare();
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *)
- instance->hostdata;
+static void NCR5380_reselect(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char target_mask;
unsigned char lun, phase;
int len;
unsigned char msg[3];
unsigned char *data;
- struct scsi_cmnd *tmp = NULL, *prev;
- int abort = 0;
- NCR5380_setup(instance);
+ struct NCR5380_cmd *ncmd;
+ struct scsi_cmnd *tmp;
/*
* Disable arbitration, etc. since the host adapter obviously
@@ -2424,12 +2099,12 @@ static void NCR5380_reselect(struct Scsi_Host *instance) {
*/
NCR5380_write(MODE_REG, MR_BASE);
- hostdata->restart_select = 1;
target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
- dprintk(NDEBUG_SELECTION, "scsi%d : reselect\n", instance->host_no);
- /*
+ dsprintk(NDEBUG_RESELECTION, instance, "reselect\n");
+
+ /*
* At this point, we have detected that our SCSI ID is on the bus,
* SEL is true and BSY was false for at least one bus settle delay
* (400 ns).
@@ -2439,103 +2114,110 @@ static void NCR5380_reselect(struct Scsi_Host *instance) {
*/
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
-
- /* FIXME: timeout too long, must fail to workqueue */
- if(NCR5380_poll_politely(instance, STATUS_REG, SR_SEL, 0, 2*HZ)<0)
- abort = 1;
-
+ if (NCR5380_poll_politely(instance,
+ STATUS_REG, SR_SEL, 0, 2 * HZ) < 0) {
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ return;
+ }
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
/*
* Wait for target to go into MSGIN.
- * FIXME: timeout needed and fail to work queeu
*/
- if(NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 2*HZ))
- abort = 1;
+ if (NCR5380_poll_politely(instance,
+ STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
+ do_abort(instance);
+ return;
+ }
len = 1;
data = msg;
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
+ if (len) {
+ do_abort(instance);
+ return;
+ }
+
if (!(msg[0] & 0x80)) {
- printk(KERN_ERR "scsi%d : expecting IDENTIFY message, got ", instance->host_no);
+ shost_printk(KERN_ERR, instance, "expecting IDENTIFY message, got ");
spi_print_msg(msg);
- abort = 1;
- } else {
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- lun = (msg[0] & 0x07);
+ printk("\n");
+ do_abort(instance);
+ return;
+ }
+ lun = msg[0] & 0x07;
- /*
- * We need to add code for SCSI-II to track which devices have
- * I_T_L_Q nexuses established, and which have simple I_T_L
- * nexuses so we can chose to do additional data transfer.
- */
+ /*
+ * We need to add code for SCSI-II to track which devices have
+ * I_T_L_Q nexuses established, and which have simple I_T_L
+ * nexuses so we can chose to do additional data transfer.
+ */
- /*
- * Find the command corresponding to the I_T_L or I_T_L_Q nexus we
- * just reestablished, and remove it from the disconnected queue.
- */
+ /*
+ * Find the command corresponding to the I_T_L or I_T_L_Q nexus we
+ * just reestablished, and remove it from the disconnected queue.
+ */
+ tmp = NULL;
+ list_for_each_entry(ncmd, &hostdata->disconnected, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL; tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble)
- if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun)
- ) {
- if (prev) {
- REMOVE(prev, prev->host_scribble, tmp, tmp->host_scribble);
- prev->host_scribble = tmp->host_scribble;
- } else {
- REMOVE(-1, hostdata->disconnected_queue, tmp, tmp->host_scribble);
- hostdata->disconnected_queue = (struct scsi_cmnd *) tmp->host_scribble;
- }
- tmp->host_scribble = NULL;
- break;
- }
- if (!tmp) {
- printk(KERN_ERR "scsi%d : warning : target bitmask %02x lun %d not in disconnect_queue.\n", instance->host_no, target_mask, lun);
- /*
- * Since we have an established nexus that we can't do anything with,
- * we must abort it.
- */
- abort = 1;
+ if (target_mask == (1 << scmd_id(cmd)) &&
+ lun == (u8)cmd->device->lun) {
+ list_del(&ncmd->list);
+ tmp = cmd;
+ break;
}
}
- if (abort) {
- do_abort(instance);
+ if (tmp) {
+ dsprintk(NDEBUG_RESELECTION | NDEBUG_QUEUES, instance,
+ "reselect: removed %p from disconnected queue\n", tmp);
} else {
- hostdata->connected = tmp;
- dprintk(NDEBUG_RESELECTION, "scsi%d : nexus established, target = %d, lun = %llu, tag = %d\n", instance->host_no, tmp->device->id, tmp->device->lun, tmp->tag);
+ shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n",
+ target_mask, lun);
+ /*
+ * Since we have an established nexus that we can't do anything
+ * with, we must abort it.
+ */
+ do_abort(instance);
+ return;
}
+
+ /* Accept message by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+
+ hostdata->connected = tmp;
+ dsprintk(NDEBUG_RESELECTION, instance, "nexus established, target %d, lun %llu, tag %d\n",
+ scmd_id(tmp), tmp->device->lun, tmp->tag);
}
/*
* Function : void NCR5380_dma_complete (struct Scsi_Host *instance)
*
* Purpose : called by interrupt handler when DMA finishes or a phase
- * mismatch occurs (which would finish the DMA transfer).
+ * mismatch occurs (which would finish the DMA transfer).
*
* Inputs : instance - this instance of the NCR5380.
*
* Returns : pointer to the scsi_cmnd structure for which the I_T_L
- * nexus has been reestablished, on failure NULL is returned.
+ * nexus has been reestablished, on failure NULL is returned.
*/
#ifdef REAL_DMA
static void NCR5380_dma_complete(NCR5380_instance * instance) {
- NCR5380_local_declare();
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int transferred;
- NCR5380_setup(instance);
/*
* XXX this might not be right.
*
* Wait for final byte to transfer, ie wait for ACK to go false.
*
- * We should use the Last Byte Sent bit, unfortunately this is
+ * We should use the Last Byte Sent bit, unfortunately this is
* not available on the 5380/5381 (only the various CMOS chips)
*
* FIXME: timeout, and need to handle long timeout/irq case
@@ -2543,7 +2225,6 @@ static void NCR5380_dma_complete(NCR5380_instance * instance) {
NCR5380_poll_politely(instance, BUS_AND_STATUS_REG, BASR_ACK, 0, 5*HZ);
- NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
/*
@@ -2560,190 +2241,251 @@ static void NCR5380_dma_complete(NCR5380_instance * instance) {
}
#endif /* def REAL_DMA */
-/*
- * Function : int NCR5380_abort (struct scsi_cmnd *cmd)
- *
- * Purpose : abort a command
- *
- * Inputs : cmd - the scsi_cmnd to abort, code - code to set the
- * host byte of the result field to, if zero DID_ABORTED is
- * used.
- *
- * Returns : SUCCESS - success, FAILED on failure.
- *
- * XXX - there is no way to abort the command that is currently
- * connected, you have to wait for it to complete. If this is
- * a problem, we could implement longjmp() / setjmp(), setjmp()
- * called where the loop started in NCR5380_main().
- *
- * Locks: host lock taken by caller
+/**
+ * list_find_cmd - test for presence of a command in a linked list
+ * @haystack: list of commands
+ * @needle: command to search for
*/
-static int NCR5380_abort(struct scsi_cmnd *cmd)
+static bool list_find_cmd(struct list_head *haystack,
+ struct scsi_cmnd *needle)
{
- NCR5380_local_declare();
- struct Scsi_Host *instance = cmd->device->host;
- struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
- struct scsi_cmnd *tmp, **prev;
+ struct NCR5380_cmd *ncmd;
- scmd_printk(KERN_WARNING, cmd, "aborting command\n");
+ list_for_each_entry(ncmd, haystack, list)
+ if (NCR5380_to_scmd(ncmd) == needle)
+ return true;
+ return false;
+}
- NCR5380_print_status(instance);
+/**
+ * list_remove_cmd - remove a command from linked list
+ * @haystack: list of commands
+ * @needle: command to remove
+ */
- NCR5380_setup(instance);
+static bool list_del_cmd(struct list_head *haystack,
+ struct scsi_cmnd *needle)
+{
+ if (list_find_cmd(haystack, needle)) {
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(needle);
- dprintk(NDEBUG_ABORT, "scsi%d : abort called\n", instance->host_no);
- dprintk(NDEBUG_ABORT, " basr 0x%X, sr 0x%X\n", NCR5380_read(BUS_AND_STATUS_REG), NCR5380_read(STATUS_REG));
+ list_del(&ncmd->list);
+ return true;
+ }
+ return false;
+}
-#if 0
-/*
- * Case 1 : If the command is the currently executing command,
- * we'll set the aborted flag and return control so that
- * information transfer routine can exit cleanly.
+/**
+ * NCR5380_abort - scsi host eh_abort_handler() method
+ * @cmd: the command to be aborted
+ *
+ * Try to abort a given command by removing it from queues and/or sending
+ * the target an abort message. This may not succeed in causing a target
+ * to abort the command. Nonetheless, the low-level driver must forget about
+ * the command because the mid-layer reclaims it and it may be re-issued.
+ *
+ * The normal path taken by a command is as follows. For EH we trace this
+ * same path to locate and abort the command.
+ *
+ * unissued -> selecting -> [unissued -> selecting ->]... connected ->
+ * [disconnected -> connected ->]...
+ * [autosense -> connected ->] done
+ *
+ * If cmd is unissued then just remove it.
+ * If cmd is disconnected, try to select the target.
+ * If cmd is connected, try to send an abort message.
+ * If cmd is waiting for autosense, give it a chance to complete but check
+ * that it isn't left connected.
+ * If cmd was not found at all then presumably it has already been completed,
+ * in which case return SUCCESS to try to avoid further EH measures.
+ * If the command has not completed yet, we must not fail to find it.
*/
- if (hostdata->connected == cmd) {
- dprintk(NDEBUG_ABORT, "scsi%d : aborting connected command\n", instance->host_no);
- hostdata->aborted = 1;
-/*
- * We should perform BSY checking, and make sure we haven't slipped
- * into BUS FREE.
- */
+static int NCR5380_abort(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *instance = cmd->device->host;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ unsigned long flags;
+ int result = SUCCESS;
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_ATN);
-/*
- * Since we can't change phases until we've completed the current
- * handshake, we have to source or sink a byte of data if the current
- * phase is not MSGOUT.
- */
+ spin_lock_irqsave(&hostdata->lock, flags);
-/*
- * Return control to the executing NCR drive so we can clear the
- * aborted flag and get back into our main loop.
- */
+#if (NDEBUG & NDEBUG_ANY)
+ scmd_printk(KERN_INFO, cmd, __func__);
+#endif
+ NCR5380_dprint(NDEBUG_ANY, instance);
+ NCR5380_dprint_phase(NDEBUG_ANY, instance);
- return SUCCESS;
+ if (list_del_cmd(&hostdata->unissued, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: removed %p from issue queue\n", cmd);
+ cmd->result = DID_ABORT << 16;
+ cmd->scsi_done(cmd); /* No tag or busy flag to worry about */
}
-#endif
-/*
- * Case 2 : If the command hasn't been issued yet, we simply remove it
- * from the issue queue.
- */
-
- dprintk(NDEBUG_ABORT, "scsi%d : abort going into loop.\n", instance->host_no);
- for (prev = (struct scsi_cmnd **) &(hostdata->issue_queue), tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp; prev = (struct scsi_cmnd **) &(tmp->host_scribble), tmp = (struct scsi_cmnd *) tmp->host_scribble)
- if (cmd == tmp) {
- REMOVE(5, *prev, tmp, tmp->host_scribble);
- (*prev) = (struct scsi_cmnd *) tmp->host_scribble;
- tmp->host_scribble = NULL;
- tmp->result = DID_ABORT << 16;
- dprintk(NDEBUG_ABORT, "scsi%d : abort removed command from issue queue.\n", instance->host_no);
- tmp->scsi_done(tmp);
- return SUCCESS;
+ if (hostdata->selecting == cmd) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: cmd %p == selecting\n", cmd);
+ hostdata->selecting = NULL;
+ cmd->result = DID_ABORT << 16;
+ complete_cmd(instance, cmd);
+ goto out;
+ }
+
+ if (list_del_cmd(&hostdata->disconnected, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: removed %p from disconnected list\n", cmd);
+ cmd->result = DID_ERROR << 16;
+ if (!hostdata->connected)
+ NCR5380_select(instance, cmd);
+ if (hostdata->connected != cmd) {
+ complete_cmd(instance, cmd);
+ result = FAILED;
+ goto out;
+ }
+ }
+
+ if (hostdata->connected == cmd) {
+ dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd);
+ hostdata->connected = NULL;
+ if (do_abort(instance)) {
+ set_host_byte(cmd, DID_ERROR);
+ complete_cmd(instance, cmd);
+ result = FAILED;
+ goto out;
}
-#if (NDEBUG & NDEBUG_ABORT)
- /* KLL */
- else if (prev == tmp)
- printk(KERN_ERR "scsi%d : LOOP\n", instance->host_no);
+ set_host_byte(cmd, DID_ABORT);
+#ifdef REAL_DMA
+ hostdata->dma_len = 0;
#endif
+ if (cmd->cmnd[0] == REQUEST_SENSE)
+ complete_cmd(instance, cmd);
+ else {
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
-/*
- * Case 3 : If any commands are connected, we're going to fail the abort
- * and let the high level SCSI driver retry at a later time or
- * issue a reset.
- *
- * Timeouts, and therefore aborted commands, will be highly unlikely
- * and handling them cleanly in this situation would make the common
- * case of noresets less efficient, and would pollute our code. So,
- * we fail.
- */
+ /* Perform autosense for this command */
+ list_add(&ncmd->list, &hostdata->autosense);
+ }
+ }
- if (hostdata->connected) {
- dprintk(NDEBUG_ABORT, "scsi%d : abort failed, command connected.\n", instance->host_no);
- return FAILED;
+ if (list_find_cmd(&hostdata->autosense, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: found %p on sense queue\n", cmd);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
+ queue_work(hostdata->work_q, &hostdata->main_task);
+ msleep(1000);
+ spin_lock_irqsave(&hostdata->lock, flags);
+ if (list_del_cmd(&hostdata->autosense, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: removed %p from sense queue\n", cmd);
+ set_host_byte(cmd, DID_ABORT);
+ complete_cmd(instance, cmd);
+ goto out;
+ }
}
-/*
- * Case 4: If the command is currently disconnected from the bus, and
- * there are no connected commands, we reconnect the I_T_L or
- * I_T_L_Q nexus associated with it, go into message out, and send
- * an abort message.
- *
- * This case is especially ugly. In order to reestablish the nexus, we
- * need to call NCR5380_select(). The easiest way to implement this
- * function was to abort if the bus was busy, and let the interrupt
- * handler triggered on the SEL for reselect take care of lost arbitrations
- * where necessary, meaning interrupts need to be enabled.
- *
- * When interrupts are enabled, the queues may change - so we
- * can't remove it from the disconnected queue before selecting it
- * because that could cause a failure in hashing the nexus if that
- * device reselected.
- *
- * Since the queues may change, we can't use the pointers from when we
- * first locate it.
- *
- * So, we must first locate the command, and if NCR5380_select()
- * succeeds, then issue the abort, relocate the command and remove
- * it from the disconnected queue.
- */
- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; tmp = (struct scsi_cmnd *) tmp->host_scribble)
- if (cmd == tmp) {
- dprintk(NDEBUG_ABORT, "scsi%d : aborting disconnected command.\n", instance->host_no);
+ if (hostdata->connected == cmd) {
+ dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd);
+ hostdata->connected = NULL;
+ if (do_abort(instance)) {
+ set_host_byte(cmd, DID_ERROR);
+ complete_cmd(instance, cmd);
+ result = FAILED;
+ goto out;
+ }
+ set_host_byte(cmd, DID_ABORT);
+#ifdef REAL_DMA
+ hostdata->dma_len = 0;
+#endif
+ complete_cmd(instance, cmd);
+ }
- if (NCR5380_select(instance, cmd))
- return FAILED;
- dprintk(NDEBUG_ABORT, "scsi%d : nexus reestablished.\n", instance->host_no);
+out:
+ if (result == FAILED)
+ dsprintk(NDEBUG_ABORT, instance, "abort: failed to abort %p\n", cmd);
+ else
+ dsprintk(NDEBUG_ABORT, instance, "abort: successfully aborted %p\n", cmd);
- do_abort(instance);
+ queue_work(hostdata->work_q, &hostdata->main_task);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
- for (prev = (struct scsi_cmnd **) &(hostdata->disconnected_queue), tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; prev = (struct scsi_cmnd **) &(tmp->host_scribble), tmp = (struct scsi_cmnd *) tmp->host_scribble)
- if (cmd == tmp) {
- REMOVE(5, *prev, tmp, tmp->host_scribble);
- *prev = (struct scsi_cmnd *) tmp->host_scribble;
- tmp->host_scribble = NULL;
- tmp->result = DID_ABORT << 16;
- tmp->scsi_done(tmp);
- return SUCCESS;
- }
- }
-/*
- * Case 5 : If we reached this point, the command was not found in any of
- * the queues.
- *
- * We probably reached this point because of an unlikely race condition
- * between the command completing successfully and the abortion code,
- * so we won't panic, but we will notify the user in case something really
- * broke.
- */
- printk(KERN_WARNING "scsi%d : warning : SCSI command probably completed successfully\n"
- " before abortion\n", instance->host_no);
- return FAILED;
+ return result;
}
-/*
- * Function : int NCR5380_bus_reset (struct scsi_cmnd *cmd)
- *
- * Purpose : reset the SCSI bus.
- *
- * Returns : SUCCESS
+/**
+ * NCR5380_bus_reset - reset the SCSI bus
+ * @cmd: SCSI command undergoing EH
*
- * Locks: host lock taken by caller
+ * Returns SUCCESS
*/
static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
{
struct Scsi_Host *instance = cmd->device->host;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ int i;
+ unsigned long flags;
+ struct NCR5380_cmd *ncmd;
- NCR5380_local_declare();
- NCR5380_setup(instance);
- NCR5380_print_status(instance);
+ spin_lock_irqsave(&hostdata->lock, flags);
+
+#if (NDEBUG & NDEBUG_ANY)
+ scmd_printk(KERN_INFO, cmd, __func__);
+#endif
+ NCR5380_dprint(NDEBUG_ANY, instance);
+ NCR5380_dprint_phase(NDEBUG_ANY, instance);
- spin_lock_irq(instance->host_lock);
do_reset(instance);
- spin_unlock_irq(instance->host_lock);
+
+ /* reset NCR registers */
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_write(TARGET_COMMAND_REG, 0);
+ NCR5380_write(SELECT_ENABLE_REG, 0);
+
+ /* After the reset, there are no more connected or disconnected commands
+ * and no busy units; so clear the low-level status here to avoid
+ * conflicts when the mid-level code tries to wake up the affected
+ * commands!
+ */
+
+ hostdata->selecting = NULL;
+
+ list_for_each_entry(ncmd, &hostdata->disconnected, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ set_host_byte(cmd, DID_RESET);
+ cmd->scsi_done(cmd);
+ }
+
+ list_for_each_entry(ncmd, &hostdata->autosense, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ set_host_byte(cmd, DID_RESET);
+ cmd->scsi_done(cmd);
+ }
+
+ if (hostdata->connected) {
+ set_host_byte(hostdata->connected, DID_RESET);
+ complete_cmd(instance, hostdata->connected);
+ hostdata->connected = NULL;
+ }
+
+ if (hostdata->sensing) {
+ set_host_byte(hostdata->connected, DID_RESET);
+ complete_cmd(instance, hostdata->sensing);
+ hostdata->sensing = NULL;
+ }
+
+ for (i = 0; i < 8; ++i)
+ hostdata->busy[i] = 0;
+#ifdef REAL_DMA
+ hostdata->dma_len = 0;
+#endif
+
+ queue_work(hostdata->work_q, &hostdata->main_task);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
return SUCCESS;
}
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
index 162112dd1bf8..a79288682a74 100644
--- a/drivers/scsi/NCR5380.h
+++ b/drivers/scsi/NCR5380.h
@@ -22,8 +22,13 @@
#ifndef NCR5380_H
#define NCR5380_H
+#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/workqueue.h>
+#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
+#include <scsi/scsi_transport_spi.h>
#define NDEBUG_ARBITRATION 0x1
#define NDEBUG_AUTOSENSE 0x2
@@ -158,8 +163,7 @@
/* Write any value to this register to start an ini mode DMA receive */
#define START_DMA_INITIATOR_RECEIVE_REG 7 /* wo */
-#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8 /* rw */
-
+/* NCR 53C400(A) Control Status Register bits: */
#define CSR_RESET 0x80 /* wo Resets 53c400 */
#define CSR_53C80_REG 0x80 /* ro 5380 registers busy */
#define CSR_TRANS_DIR 0x40 /* rw Data transfer direction */
@@ -176,16 +180,6 @@
#define CSR_BASE CSR_53C80_INTR
#endif
-/* Number of 128-byte blocks to be transferred */
-#define C400_BLOCK_COUNTER_REG NCR53C400_register_offset-7 /* rw */
-
-/* Resume transfer after disconnect */
-#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6 /* wo */
-
-/* Access to host buffer stack */
-#define C400_HOST_BUFFER NCR53C400_register_offset-4 /* rw */
-
-
/* Note : PHASE_* macros are based on the values of the STATUS register */
#define PHASE_MASK (SR_MSG | SR_CD | SR_IO)
@@ -205,16 +199,6 @@
#define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
-/*
- * The internal should_disconnect() function returns these based on the
- * expected length of a disconnect if a device supports disconnect/
- * reconnect.
- */
-
-#define DISCONNECT_NONE 0
-#define DISCONNECT_TIME_TO_DATA 1
-#define DISCONNECT_LONG 2
-
/*
* "Special" value for the (unsigned char) command tag, to indicate
* I_T_L nexus instead of I_T_L_Q.
@@ -236,15 +220,11 @@
#define NO_IRQ 0
#endif
-#define FLAG_HAS_LAST_BYTE_SENT 1 /* NCR53c81 or better */
-#define FLAG_CHECK_LAST_BYTE_SENT 2 /* Only test once */
-#define FLAG_NCR53C400 4 /* NCR53c400 */
+#define FLAG_NO_DMA_FIXUP 1 /* No DMA errata workarounds */
#define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */
-#define FLAG_DTC3181E 16 /* DTC3181E */
#define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */
#define FLAG_TAGGED_QUEUING 64 /* as X3T9.2 spelled it */
-
-#ifndef ASM
+#define FLAG_TOSHIBA_DELAY 128 /* Allow for borken CD-ROMs */
#ifdef SUPPORT_TAGS
struct tag_alloc {
@@ -258,33 +238,24 @@ struct NCR5380_hostdata {
NCR5380_implementation_fields; /* implementation specific */
struct Scsi_Host *host; /* Host backpointer */
unsigned char id_mask, id_higher_mask; /* 1 << id, all bits greater */
- unsigned char targets_present; /* targets we have connected
- to, so we can call a select
- failure a retryable condition */
- volatile unsigned char busy[8]; /* index = target, bit = lun */
+ unsigned char busy[8]; /* index = target, bit = lun */
#if defined(REAL_DMA) || defined(REAL_DMA_POLL)
- volatile int dma_len; /* requested length of DMA */
+ int dma_len; /* requested length of DMA */
#endif
- volatile unsigned char last_message; /* last message OUT */
- volatile struct scsi_cmnd *connected; /* currently connected command */
- volatile struct scsi_cmnd *issue_queue; /* waiting to be issued */
- volatile struct scsi_cmnd *disconnected_queue; /* waiting for reconnect */
- volatile int restart_select; /* we have disconnected,
- used to restart
- NCR5380_select() */
- volatile unsigned aborted:1; /* flag, says aborted */
+ unsigned char last_message; /* last message OUT */
+ struct scsi_cmnd *connected; /* currently connected cmnd */
+ struct scsi_cmnd *selecting; /* cmnd to be connected */
+ struct list_head unissued; /* waiting to be issued */
+ struct list_head autosense; /* priority issue queue */
+ struct list_head disconnected; /* waiting for reconnect */
+ spinlock_t lock; /* protects this struct */
int flags;
- unsigned long time_expires; /* in jiffies, set prior to sleeping */
- int select_time; /* timer in select for target response */
- volatile struct scsi_cmnd *selecting;
- struct delayed_work coroutine; /* our co-routine */
struct scsi_eh_save ses;
+ struct scsi_cmnd *sensing;
char info[256];
int read_overruns; /* number of bytes to cut from a
* transfer to handle chip overruns */
- int retain_dma_intr;
struct work_struct main_task;
- volatile int main_running;
#ifdef SUPPORT_TAGS
struct tag_alloc TagAlloc[8][8]; /* 8 targets and 8 LUNs */
#endif
@@ -292,10 +263,23 @@ struct NCR5380_hostdata {
unsigned spin_max_r;
unsigned spin_max_w;
#endif
+ struct workqueue_struct *work_q;
+ unsigned long accesses_per_ms; /* chip register accesses per ms */
};
#ifdef __KERNEL__
+struct NCR5380_cmd {
+ struct list_head list;
+};
+
+#define NCR5380_CMD_SIZE (sizeof(struct NCR5380_cmd))
+
+static inline struct scsi_cmnd *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr)
+{
+ return ((struct scsi_cmnd *)ncmd_ptr) - 1;
+}
+
#ifndef NDEBUG
#define NDEBUG (0)
#endif
@@ -304,6 +288,11 @@ struct NCR5380_hostdata {
do { if ((NDEBUG) & (flg)) \
printk(KERN_DEBUG fmt, ## __VA_ARGS__); } while (0)
+#define dsprintk(flg, host, fmt, ...) \
+ do { if ((NDEBUG) & (flg)) \
+ shost_printk(KERN_DEBUG, host, fmt, ## __VA_ARGS__); \
+ } while (0)
+
#if NDEBUG
#define NCR5380_dprint(flg, arg) \
do { if ((NDEBUG) & (flg)) NCR5380_print(arg); } while (0)
@@ -320,6 +309,7 @@ static void NCR5380_print(struct Scsi_Host *instance);
static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
#endif
static int NCR5380_init(struct Scsi_Host *instance, int flags);
+static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
static void NCR5380_exit(struct Scsi_Host *instance);
static void NCR5380_information_transfer(struct Scsi_Host *instance);
#ifndef DONT_USE_INTR
@@ -328,7 +318,7 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id);
static void NCR5380_main(struct work_struct *work);
static const char *NCR5380_info(struct Scsi_Host *instance);
static void NCR5380_reselect(struct Scsi_Host *instance);
-static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd);
+static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *);
#if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)
static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
#endif
@@ -443,5 +433,4 @@ static __inline__ int NCR5380_pc_dma_residual(struct Scsi_Host *instance)
#endif /* defined(i386) || defined(__alpha__) */
#endif /* defined(REAL_DMA) */
#endif /* __KERNEL__ */
-#endif /* ndef ASM */
#endif /* NCR5380_H */
diff --git a/drivers/scsi/arm/cumana_1.c b/drivers/scsi/arm/cumana_1.c
index d28d6c0f18c0..221f18c5df93 100644
--- a/drivers/scsi/arm/cumana_1.c
+++ b/drivers/scsi/arm/cumana_1.c
@@ -4,9 +4,7 @@
* Copyright 1995-2002, Russell King
*/
#include <linux/module.h>
-#include <linux/signal.h>
#include <linux/ioport.h>
-#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/init.h>
@@ -15,15 +13,14 @@
#include <scsi/scsi_host.h>
-#include <scsi/scsicam.h>
-
#define PSEUDO_DMA
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
-#define NCR5380_local_declare() struct Scsi_Host *_instance
-#define NCR5380_setup(instance) _instance = instance
-#define NCR5380_read(reg) cumanascsi_read(_instance, reg)
-#define NCR5380_write(reg, value) cumanascsi_write(_instance, reg, value)
+#define NCR5380_read(reg) cumanascsi_read(instance, reg)
+#define NCR5380_write(reg, value) cumanascsi_write(instance, reg, value)
+
+#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
+
#define NCR5380_intr cumanascsi_intr
#define NCR5380_queue_command cumanascsi_queue_command
#define NCR5380_info cumanascsi_info
@@ -211,6 +208,8 @@ static struct scsi_host_template cumanascsi_template = {
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "CumanaSCSI-1",
+ .cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
static int cumanascsi1_probe(struct expansion_card *ec,
@@ -240,23 +239,21 @@ static int cumanascsi1_probe(struct expansion_card *ec,
host->irq = ec->irq;
- NCR5380_init(host, 0);
+ ret = NCR5380_init(host, 0);
+ if (ret)
+ goto out_unmap;
+
+ NCR5380_maybe_reset_bus(host);
priv(host)->ctrl = 0;
writeb(0, priv(host)->base + CTRL);
- host->n_io_port = 255;
- if (!(request_region(host->io_port, host->n_io_port, "CumanaSCSI-1"))) {
- ret = -EBUSY;
- goto out_unmap;
- }
-
ret = request_irq(host->irq, cumanascsi_intr, 0,
"CumanaSCSI-1", host);
if (ret) {
printk("scsi%d: IRQ%d not free: %d\n",
host->host_no, host->irq, ret);
- goto out_unmap;
+ goto out_exit;
}
ret = scsi_add_host(host, &ec->dev);
@@ -268,6 +265,8 @@ static int cumanascsi1_probe(struct expansion_card *ec,
out_free_irq:
free_irq(host->irq, host);
+ out_exit:
+ NCR5380_exit(host);
out_unmap:
iounmap(priv(host)->base);
iounmap(priv(host)->dma);
diff --git a/drivers/scsi/arm/oak.c b/drivers/scsi/arm/oak.c
index 7c6fa1479c9c..1fab1d1896b1 100644
--- a/drivers/scsi/arm/oak.c
+++ b/drivers/scsi/arm/oak.c
@@ -5,9 +5,7 @@
*/
#include <linux/module.h>
-#include <linux/signal.h>
#include <linux/ioport.h>
-#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/init.h>
@@ -20,14 +18,16 @@
#define DONT_USE_INTR
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
-#define NCR5380_local_declare() void __iomem *_base
-#define NCR5380_setup(host) _base = priv(host)->base
-#define NCR5380_read(reg) readb(_base + ((reg) << 2))
-#define NCR5380_write(reg, value) writeb(value, _base + ((reg) << 2))
+#define NCR5380_read(reg) \
+ readb(priv(instance)->base + ((reg) << 2))
+#define NCR5380_write(reg, value) \
+ writeb(value, priv(instance)->base + ((reg) << 2))
+
+#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
+
#define NCR5380_queue_command oakscsi_queue_command
#define NCR5380_info oakscsi_info
-#define NCR5380_show_info oakscsi_show_info
#define NCR5380_implementation_fields \
void __iomem *base
@@ -103,7 +103,6 @@ printk("reading %p len %d\n", addr, len);
static struct scsi_host_template oakscsi_template = {
.module = THIS_MODULE,
- .show_info = oakscsi_show_info,
.name = "Oak 16-bit SCSI",
.info = oakscsi_info,
.queuecommand = oakscsi_queue_command,
@@ -115,6 +114,8 @@ static struct scsi_host_template oakscsi_template = {
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "oakscsi",
+ .cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
@@ -142,15 +143,21 @@ static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
host->irq = NO_IRQ;
host->n_io_port = 255;
- NCR5380_init(host, 0);
+ ret = NCR5380_init(host, 0);
+ if (ret)
+ goto out_unmap;
+
+ NCR5380_maybe_reset_bus(host);
ret = scsi_add_host(host, &ec->dev);
if (ret)
- goto out_unmap;
+ goto out_exit;
scsi_scan_host(host);
goto out;
+ out_exit:
+ NCR5380_exit(host);
out_unmap:
iounmap(priv(host)->base);
unreg:
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index db87ece6edb2..e65478651ca9 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -1,15 +1,15 @@
/*
* NCR 5380 generic driver routines. These should make it *trivial*
- * to implement 5380 SCSI drivers under Linux with a non-trantor
- * architecture.
+ * to implement 5380 SCSI drivers under Linux with a non-trantor
+ * architecture.
*
- * Note that these routines also work with NR53c400 family chips.
+ * Note that these routines also work with NR53c400 family chips.
*
* Copyright 1993, Drew Eckhardt
- * Visionary Computing
- * (Unix and Linux consulting and custom programming)
- * drew@colorado.edu
- * +1 (303) 666-5836
+ * Visionary Computing
+ * (Unix and Linux consulting and custom programming)
+ * drew@colorado.edu
+ * +1 (303) 666-5836
*
* For more information, please consult
*
@@ -24,84 +24,10 @@
* 1+ (800) 334-5454
*/
-/*
- * ++roman: To port the 5380 driver to the Atari, I had to do some changes in
- * this file, too:
- *
- * - Some of the debug statements were incorrect (undefined variables and the
- * like). I fixed that.
- *
- * - In information_transfer(), I think a #ifdef was wrong. Looking at the
- * possible DMA transfer size should also happen for REAL_DMA. I added this
- * in the #if statement.
- *
- * - When using real DMA, information_transfer() should return in a DATAOUT
- * phase after starting the DMA. It has nothing more to do.
- *
- * - The interrupt service routine should run main after end of DMA, too (not
- * only after RESELECTION interrupts). Additionally, it should _not_ test
- * for more interrupts after running main, since a DMA process may have
- * been started and interrupts are turned on now. The new int could happen
- * inside the execution of NCR5380_intr(), leading to recursive
- * calls.
- *
- * - I've added a function merge_contiguous_buffers() that tries to
- * merge scatter-gather buffers that are located at contiguous
- * physical addresses and can be processed with the same DMA setup.
- * Since most scatter-gather operations work on a page (4K) of
- * 4 buffers (1K), in more than 90% of all cases three interrupts and
- * DMA setup actions are saved.
- *
- * - I've deleted all the stuff for AUTOPROBE_IRQ, REAL_DMA_POLL, PSEUDO_DMA
- * and USLEEP, because these were messing up readability and will never be
- * needed for Atari SCSI.
- *
- * - I've revised the NCR5380_main() calling scheme (relax the 'main_running'
- * stuff), and 'main' is executed in a bottom half if awoken by an
- * interrupt.
- *
- * - The code was quite cluttered up by "#if (NDEBUG & NDEBUG_*) printk..."
- * constructs. In my eyes, this made the source rather unreadable, so I
- * finally replaced that by the *_PRINTK() macros.
- *
- */
-
-/*
- * Further development / testing that should be done :
- * 1. Test linked command handling code after Eric is ready with
- * the high level code.
- */
+/* Ported to Atari by Roman Hodek and others. */
/* Adapted for the sun3 by Sam Creasey. */
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_transport_spi.h>
-
-#if (NDEBUG & NDEBUG_LISTS)
-#define LIST(x, y) \
- do { \
- printk("LINE:%d Adding %p to %p\n", \
- __LINE__, (void*)(x), (void*)(y)); \
- if ((x) == (y)) \
- udelay(5); \
- } while (0)
-#define REMOVE(w, x, y, z) \
- do { \
- printk("LINE:%d Removing: %p->%p %p->%p \n", \
- __LINE__, (void*)(w), (void*)(x), \
- (void*)(y), (void*)(z)); \
- if ((x) == (y)) \
- udelay(5); \
- } while (0)
-#else
-#define LIST(x,y)
-#define REMOVE(w,x,y,z)
-#endif
-
-#ifndef notyet
-#undef LINKED
-#endif
-
/*
* Design
*
@@ -126,17 +52,7 @@
* piece of hardware that requires you to sit in a loop polling for
* the REQ signal as long as you are connected. Some devices are
* brain dead (ie, many TEXEL CD ROM drives) and won't disconnect
- * while doing long seek operations.
- *
- * The workaround for this is to keep track of devices that have
- * disconnected. If the device hasn't disconnected, for commands that
- * should disconnect, we do something like
- *
- * while (!REQ is asserted) { sleep for N usecs; poll for M usecs }
- *
- * Some tweaking of N and M needs to be done. An algorithm based
- * on "time to data" would give the best results as long as short time
- * to datas (ie, on the same track) were considered, however these
+ * while doing long seek operations. [...] These
* broken devices are the exception rather than the rule and I'd rather
* spend my time optimizing for the normal case.
*
@@ -177,12 +93,10 @@
*
* These macros control options :
* AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- * for commands that return with a CHECK CONDITION status.
+ * for commands that return with a CHECK CONDITION status.
*
* DIFFERENTIAL - if defined, NCR53c81 chips will use external differential
- * transceivers.
- *
- * LINKED - if defined, linked commands are supported.
+ * transceivers.
*
* REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
*
@@ -195,17 +109,17 @@
* NCR5380_write(register, value) - write to the specific register
*
* NCR5380_implementation_fields - additional fields needed for this
- * specific implementation of the NCR5380
+ * specific implementation of the NCR5380
*
* Either real DMA *or* pseudo DMA may be implemented
* REAL functions :
* NCR5380_REAL_DMA should be defined if real DMA is to be used.
* Note that the DMA setup functions should return the number of bytes
- * that they were able to program the controller for.
+ * that they were able to program the controller for.
*
* Also note that generic i386/PC versions of these macros are
- * available as NCR5380_i386_dma_write_setup,
- * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
+ * available as NCR5380_i386_dma_write_setup,
+ * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
*
* NCR5380_dma_write_setup(instance, src, count) - initialize
* NCR5380_dma_read_setup(instance, dst, count) - initialize
@@ -221,18 +135,8 @@
* possible) function may be used.
*/
-/* Macros ease life... :-) */
-#define SETUP_HOSTDATA(in) \
- struct NCR5380_hostdata *hostdata = \
- (struct NCR5380_hostdata *)(in)->hostdata
-#define HOSTDATA(in) ((struct NCR5380_hostdata *)(in)->hostdata)
-
-#define NEXT(cmd) ((struct scsi_cmnd *)(cmd)->host_scribble)
-#define SET_NEXT(cmd,next) ((cmd)->host_scribble = (void *)(next))
-#define NEXTADDR(cmd) ((struct scsi_cmnd **)&(cmd)->host_scribble)
-
-#define HOSTNO instance->host_no
-#define H_NO(cmd) (cmd)->device->host->host_no
+static int do_abort(struct Scsi_Host *);
+static void do_reset(struct Scsi_Host *);
#ifdef SUPPORT_TAGS
@@ -251,9 +155,7 @@
* cannot know it in advance :-( We just see a QUEUE_FULL status being
* returned. So, in this case, the driver internal queue size assumption is
* reduced to the number of active tags if QUEUE_FULL is returned by the
- * target. The command is returned to the mid-level, but with status changed
- * to BUSY, since --as I've seen-- the mid-level can't handle QUEUE_FULL
- * correctly.
+ * target.
*
* We're also not allowed running tagged commands as long as an untagged
* command is active. And REQUEST SENSE commands after a contingent allegiance
@@ -304,7 +206,8 @@ static void __init init_tags(struct NCR5380_hostdata *hostdata)
static int is_lun_busy(struct scsi_cmnd *cmd, int should_be_tagged)
{
u8 lun = cmd->device->lun;
- SETUP_HOSTDATA(cmd->device->host);
+ struct Scsi_Host *instance = cmd->device->host;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
if (hostdata->busy[cmd->device->id] & (1 << lun))
return 1;
@@ -314,8 +217,8 @@ static int is_lun_busy(struct scsi_cmnd *cmd, int should_be_tagged)
return 0;
if (hostdata->TagAlloc[scmd_id(cmd)][lun].nr_allocated >=
hostdata->TagAlloc[scmd_id(cmd)][lun].queue_size) {
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d: no free tags\n",
- H_NO(cmd), cmd->device->id, lun);
+ dsprintk(NDEBUG_TAGS, instance, "target %d lun %d: no free tags\n",
+ scmd_id(cmd), lun);
return 1;
}
return 0;
@@ -330,7 +233,8 @@ static int is_lun_busy(struct scsi_cmnd *cmd, int should_be_tagged)
static void cmd_get_tag(struct scsi_cmnd *cmd, int should_be_tagged)
{
u8 lun = cmd->device->lun;
- SETUP_HOSTDATA(cmd->device->host);
+ struct Scsi_Host *instance = cmd->device->host;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
/* If we or the target don't support tagged queuing, allocate the LUN for
* an untagged command.
@@ -340,18 +244,16 @@ static void cmd_get_tag(struct scsi_cmnd *cmd, int should_be_tagged)
!cmd->device->tagged_supported) {
cmd->tag = TAG_NONE;
hostdata->busy[cmd->device->id] |= (1 << lun);
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d now allocated by untagged "
- "command\n", H_NO(cmd), cmd->device->id, lun);
+ dsprintk(NDEBUG_TAGS, instance, "target %d lun %d now allocated by untagged command\n",
+ scmd_id(cmd), lun);
} else {
struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun];
cmd->tag = find_first_zero_bit(ta->allocated, MAX_TAGS);
set_bit(cmd->tag, ta->allocated);
ta->nr_allocated++;
- dprintk(NDEBUG_TAGS, "scsi%d: using tag %d for target %d lun %d "
- "(now %d tags in use)\n",
- H_NO(cmd), cmd->tag, cmd->device->id,
- lun, ta->nr_allocated);
+ dsprintk(NDEBUG_TAGS, instance, "using tag %d for target %d lun %d (%d tags allocated)\n",
+ cmd->tag, scmd_id(cmd), lun, ta->nr_allocated);
}
}
@@ -363,21 +265,22 @@ static void cmd_get_tag(struct scsi_cmnd *cmd, int should_be_tagged)
static void cmd_free_tag(struct scsi_cmnd *cmd)
{
u8 lun = cmd->device->lun;
- SETUP_HOSTDATA(cmd->device->host);
+ struct Scsi_Host *instance = cmd->device->host;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
if (cmd->tag == TAG_NONE) {
hostdata->busy[cmd->device->id] &= ~(1 << lun);
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d untagged cmd finished\n",
- H_NO(cmd), cmd->device->id, lun);
+ dsprintk(NDEBUG_TAGS, instance, "target %d lun %d untagged cmd freed\n",
+ scmd_id(cmd), lun);
} else if (cmd->tag >= MAX_TAGS) {
- printk(KERN_NOTICE "scsi%d: trying to free bad tag %d!\n",
- H_NO(cmd), cmd->tag);
+ shost_printk(KERN_NOTICE, instance,
+ "trying to free bad tag %d!\n", cmd->tag);
} else {
struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun];
clear_bit(cmd->tag, ta->allocated);
ta->nr_allocated--;
- dprintk(NDEBUG_TAGS, "scsi%d: freed tag %d for target %d lun %d\n",
- H_NO(cmd), cmd->tag, cmd->device->id, lun);
+ dsprintk(NDEBUG_TAGS, instance, "freed tag %d for target %d lun %d\n",
+ cmd->tag, scmd_id(cmd), lun);
}
}
@@ -401,17 +304,15 @@ static void free_all_tags(struct NCR5380_hostdata *hostdata)
#endif /* SUPPORT_TAGS */
-
-/*
- * Function: void merge_contiguous_buffers( struct scsi_cmnd *cmd )
- *
- * Purpose: Try to merge several scatter-gather requests into one DMA
- * transfer. This is possible if the scatter buffers lie on
- * physical contiguous addresses.
- *
- * Parameters: struct scsi_cmnd *cmd
- * The command to work on. The first scatter buffer's data are
- * assumed to be already transferred into ptr/this_residual.
+/**
+ * merge_contiguous_buffers - coalesce scatter-gather list entries
+ * @cmd: command requesting IO
+ *
+ * Try to merge several scatter-gather buffers into one DMA transfer.
+ * This is possible if the scatter buffers lie on physically
+ * contiguous addresses. The first scatter-gather buffer's data are
+ * assumed to be already transferred into cmd->SCp.this_residual.
+ * Every buffer merged avoids an interrupt and a DMA setup operation.
*/
static void merge_contiguous_buffers(struct scsi_cmnd *cmd)
@@ -463,9 +364,7 @@ static inline void initialize_SCp(struct scsi_cmnd *cmd)
cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1;
cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
cmd->SCp.this_residual = cmd->SCp.buffer->length;
- /* ++roman: Try to merge some scatter-buffers if they are at
- * contiguous physical addresses.
- */
+
merge_contiguous_buffers(cmd);
} else {
cmd->SCp.buffer = NULL;
@@ -473,31 +372,110 @@ static inline void initialize_SCp(struct scsi_cmnd *cmd)
cmd->SCp.ptr = NULL;
cmd->SCp.this_residual = 0;
}
+
+ cmd->SCp.Status = 0;
+ cmd->SCp.Message = 0;
+}
+
+/**
+ * NCR5380_poll_politely2 - wait for two chip register values
+ * @instance: controller to poll
+ * @reg1: 5380 register to poll
+ * @bit1: Bitmask to check
+ * @val1: Expected value
+ * @reg2: Second 5380 register to poll
+ * @bit2: Second bitmask to check
+ * @val2: Second expected value
+ * @wait: Time-out in jiffies
+ *
+ * Polls the chip in a reasonably efficient manner waiting for an
+ * event to occur. After a short quick poll we begin to yield the CPU
+ * (if possible). In irq contexts the time-out is arbitrarily limited.
+ * Callers may hold locks as long as they are held in irq mode.
+ *
+ * Returns 0 if either or both event(s) occurred otherwise -ETIMEDOUT.
+ */
+
+static int NCR5380_poll_politely2(struct Scsi_Host *instance,
+ int reg1, int bit1, int val1,
+ int reg2, int bit2, int val2, int wait)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ unsigned long deadline = jiffies + wait;
+ unsigned long n;
+
+ /* Busy-wait for up to 10 ms */
+ n = min(10000U, jiffies_to_usecs(wait));
+ n *= hostdata->accesses_per_ms;
+ n /= 2000;
+ do {
+ if ((NCR5380_read(reg1) & bit1) == val1)
+ return 0;
+ if ((NCR5380_read(reg2) & bit2) == val2)
+ return 0;
+ cpu_relax();
+ } while (n--);
+
+ if (irqs_disabled() || in_interrupt())
+ return -ETIMEDOUT;
+
+ /* Repeatedly sleep for 1 ms until deadline */
+ while (time_is_after_jiffies(deadline)) {
+ schedule_timeout_uninterruptible(1);
+ if ((NCR5380_read(reg1) & bit1) == val1)
+ return 0;
+ if ((NCR5380_read(reg2) & bit2) == val2)
+ return 0;
+ }
+
+ return -ETIMEDOUT;
}
-#include <linux/delay.h>
+static inline int NCR5380_poll_politely(struct Scsi_Host *instance,
+ int reg, int bit, int val, int wait)
+{
+ return NCR5380_poll_politely2(instance, reg, bit, val,
+ reg, bit, val, wait);
+}
#if NDEBUG
static struct {
unsigned char mask;
const char *name;
} signals[] = {
- { SR_DBP, "PARITY"}, { SR_RST, "RST" }, { SR_BSY, "BSY" },
- { SR_REQ, "REQ" }, { SR_MSG, "MSG" }, { SR_CD, "CD" }, { SR_IO, "IO" },
- { SR_SEL, "SEL" }, {0, NULL}
-}, basrs[] = {
- {BASR_ATN, "ATN"}, {BASR_ACK, "ACK"}, {0, NULL}
-}, icrs[] = {
- {ICR_ASSERT_RST, "ASSERT RST"},{ICR_ASSERT_ACK, "ASSERT ACK"},
- {ICR_ASSERT_BSY, "ASSERT BSY"}, {ICR_ASSERT_SEL, "ASSERT SEL"},
- {ICR_ASSERT_ATN, "ASSERT ATN"}, {ICR_ASSERT_DATA, "ASSERT DATA"},
+ {SR_DBP, "PARITY"},
+ {SR_RST, "RST"},
+ {SR_BSY, "BSY"},
+ {SR_REQ, "REQ"},
+ {SR_MSG, "MSG"},
+ {SR_CD, "CD"},
+ {SR_IO, "IO"},
+ {SR_SEL, "SEL"},
+ {0, NULL}
+},
+basrs[] = {
+ {BASR_ATN, "ATN"},
+ {BASR_ACK, "ACK"},
{0, NULL}
-}, mrs[] = {
- {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, {MR_TARGET, "MODE TARGET"},
- {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, {MR_ENABLE_PAR_INTR,
- "MODE PARITY INTR"}, {MR_ENABLE_EOP_INTR,"MODE EOP INTR"},
+},
+icrs[] = {
+ {ICR_ASSERT_RST, "ASSERT RST"},
+ {ICR_ASSERT_ACK, "ASSERT ACK"},
+ {ICR_ASSERT_BSY, "ASSERT BSY"},
+ {ICR_ASSERT_SEL, "ASSERT SEL"},
+ {ICR_ASSERT_ATN, "ASSERT ATN"},
+ {ICR_ASSERT_DATA, "ASSERT DATA"},
+ {0, NULL}
+},
+mrs[] = {
+ {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"},
+ {MR_TARGET, "MODE TARGET"},
+ {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"},
+ {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"},
+ {MR_ENABLE_EOP_INTR, "MODE EOP INTR"},
{MR_MONITOR_BSY, "MODE MONITOR BSY"},
- {MR_DMA_MODE, "MODE DMA"}, {MR_ARBITRATE, "MODE ARBITRATION"},
+ {MR_DMA_MODE, "MODE DMA"},
+ {MR_ARBITRATE, "MODE ARBITRATION"},
{0, NULL}
};
@@ -511,15 +489,13 @@ static struct {
static void NCR5380_print(struct Scsi_Host *instance)
{
unsigned char status, data, basr, mr, icr, i;
- unsigned long flags;
- local_irq_save(flags);
data = NCR5380_read(CURRENT_SCSI_DATA_REG);
status = NCR5380_read(STATUS_REG);
mr = NCR5380_read(MODE_REG);
icr = NCR5380_read(INITIATOR_COMMAND_REG);
basr = NCR5380_read(BUS_AND_STATUS_REG);
- local_irq_restore(flags);
+
printk("STATUS_REG: %02x ", status);
for (i = 0; signals[i].mask; ++i)
if (status & signals[i].mask)
@@ -543,8 +519,12 @@ static struct {
unsigned char value;
const char *name;
} phases[] = {
- {PHASE_DATAOUT, "DATAOUT"}, {PHASE_DATAIN, "DATAIN"}, {PHASE_CMDOUT, "CMDOUT"},
- {PHASE_STATIN, "STATIN"}, {PHASE_MSGOUT, "MSGOUT"}, {PHASE_MSGIN, "MSGIN"},
+ {PHASE_DATAOUT, "DATAOUT"},
+ {PHASE_DATAIN, "DATAIN"},
+ {PHASE_CMDOUT, "CMDOUT"},
+ {PHASE_STATIN, "STATIN"},
+ {PHASE_MSGOUT, "MSGOUT"},
+ {PHASE_MSGIN, "MSGIN"},
{PHASE_UNKNOWN, "UNKNOWN"}
};
@@ -553,8 +533,6 @@ static struct {
* @instance: adapter to dump
*
* Print the current SCSI phase for debugging purposes
- *
- * Locks: none
*/
static void NCR5380_print_phase(struct Scsi_Host *instance)
@@ -564,54 +542,21 @@ static void NCR5380_print_phase(struct Scsi_Host *instance)
status = NCR5380_read(STATUS_REG);
if (!(status & SR_REQ))
- printk(KERN_DEBUG "scsi%d: REQ not asserted, phase unknown.\n", HOSTNO);
+ shost_printk(KERN_DEBUG, instance, "REQ not asserted, phase unknown.\n");
else {
for (i = 0; (phases[i].value != PHASE_UNKNOWN) &&
(phases[i].value != (status & PHASE_MASK)); ++i)
;
- printk(KERN_DEBUG "scsi%d: phase %s\n", HOSTNO, phases[i].name);
+ shost_printk(KERN_DEBUG, instance, "phase %s\n", phases[i].name);
}
}
-
#endif
-/*
- * ++roman: New scheme of calling NCR5380_main()
- *
- * If we're not in an interrupt, we can call our main directly, it cannot be
- * already running. Else, we queue it on a task queue, if not 'main_running'
- * tells us that a lower level is already executing it. This way,
- * 'main_running' needs not be protected in a special way.
- *
- * queue_main() is a utility function for putting our main onto the task
- * queue, if main_running is false. It should be called only from a
- * interrupt or bottom half.
- */
-
-#include <linux/gfp.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-
-static inline void queue_main(struct NCR5380_hostdata *hostdata)
-{
- if (!hostdata->main_running) {
- /* If in interrupt and NCR5380_main() not already running,
- queue it on the 'immediate' task queue, to be processed
- immediately after the current interrupt processing has
- finished. */
- schedule_work(&hostdata->main_task);
- }
- /* else: nothing to do: the running NCR5380_main() will pick up
- any newly queued command. */
-}
-
/**
* NCR58380_info - report driver and host information
* @instance: relevant scsi host instance
*
* For use as the host template info() handler.
- *
- * Locks: none
*/
static const char *NCR5380_info(struct Scsi_Host *instance)
@@ -630,13 +575,14 @@ static void prepare_info(struct Scsi_Host *instance)
"base 0x%lx, irq %d, "
"can_queue %d, cmd_per_lun %d, "
"sg_tablesize %d, this_id %d, "
- "flags { %s}, "
+ "flags { %s%s}, "
"options { %s} ",
instance->hostt->name, instance->io_port, instance->n_io_port,
instance->base, instance->irq,
instance->can_queue, instance->cmd_per_lun,
instance->sg_tablesize, instance->this_id,
hostdata->flags & FLAG_TAGGED_QUEUING ? "TAGGED_QUEUING " : "",
+ hostdata->flags & FLAG_TOSHIBA_DELAY ? "TOSHIBA_DELAY " : "",
#ifdef DIFFERENTIAL
"DIFFERENTIAL "
#endif
@@ -653,102 +599,6 @@ static void prepare_info(struct Scsi_Host *instance)
}
/**
- * NCR5380_print_status - dump controller info
- * @instance: controller to dump
- *
- * Print commands in the various queues, called from NCR5380_abort
- * to aid debugging.
- */
-
-static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd)
-{
- int i, s;
- unsigned char *command;
- printk("scsi%d: destination target %d, lun %llu\n",
- H_NO(cmd), cmd->device->id, cmd->device->lun);
- printk(KERN_CONT " command = ");
- command = cmd->cmnd;
- printk(KERN_CONT "%2d (0x%02x)", command[0], command[0]);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- printk(KERN_CONT " %02x", command[i]);
- printk("\n");
-}
-
-static void NCR5380_print_status(struct Scsi_Host *instance)
-{
- struct NCR5380_hostdata *hostdata;
- struct scsi_cmnd *ptr;
- unsigned long flags;
-
- NCR5380_dprint(NDEBUG_ANY, instance);
- NCR5380_dprint_phase(NDEBUG_ANY, instance);
-
- hostdata = (struct NCR5380_hostdata *)instance->hostdata;
-
- local_irq_save(flags);
- printk("NCR5380: coroutine is%s running.\n",
- hostdata->main_running ? "" : "n't");
- if (!hostdata->connected)
- printk("scsi%d: no currently connected command\n", HOSTNO);
- else
- lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected);
- printk("scsi%d: issue_queue\n", HOSTNO);
- for (ptr = (struct scsi_cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr))
- lprint_Scsi_Cmnd(ptr);
-
- printk("scsi%d: disconnected_queue\n", HOSTNO);
- for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr;
- ptr = NEXT(ptr))
- lprint_Scsi_Cmnd(ptr);
-
- local_irq_restore(flags);
- printk("\n");
-}
-
-static void show_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
-{
- int i, s;
- unsigned char *command;
- seq_printf(m, "scsi%d: destination target %d, lun %llu\n",
- H_NO(cmd), cmd->device->id, cmd->device->lun);
- seq_puts(m, " command = ");
- command = cmd->cmnd;
- seq_printf(m, "%2d (0x%02x)", command[0], command[0]);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- seq_printf(m, " %02x", command[i]);
- seq_putc(m, '\n');
-}
-
-static int __maybe_unused NCR5380_show_info(struct seq_file *m,
- struct Scsi_Host *instance)
-{
- struct NCR5380_hostdata *hostdata;
- struct scsi_cmnd *ptr;
- unsigned long flags;
-
- hostdata = (struct NCR5380_hostdata *)instance->hostdata;
-
- local_irq_save(flags);
- seq_printf(m, "NCR5380: coroutine is%s running.\n",
- hostdata->main_running ? "" : "n't");
- if (!hostdata->connected)
- seq_printf(m, "scsi%d: no currently connected command\n", HOSTNO);
- else
- show_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m);
- seq_printf(m, "scsi%d: issue_queue\n", HOSTNO);
- for (ptr = (struct scsi_cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr))
- show_Scsi_Cmnd(ptr, m);
-
- seq_printf(m, "scsi%d: disconnected_queue\n", HOSTNO);
- for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr;
- ptr = NEXT(ptr))
- show_Scsi_Cmnd(ptr, m);
-
- local_irq_restore(flags);
- return 0;
-}
-
-/**
* NCR5380_init - initialise an NCR5380
* @instance: adapter to configure
* @flags: control flags
@@ -764,11 +614,11 @@ static int __maybe_unused NCR5380_show_info(struct seq_file *m,
static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int i;
- SETUP_HOSTDATA(instance);
+ unsigned long deadline;
hostdata->host = instance;
- hostdata->aborted = 0;
hostdata->id_mask = 1 << instance->this_id;
hostdata->id_higher_mask = 0;
for (i = hostdata->id_mask; i <= 0x80; i <<= 1)
@@ -782,13 +632,21 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
#if defined (REAL_DMA)
hostdata->dma_len = 0;
#endif
- hostdata->targets_present = 0;
+ spin_lock_init(&hostdata->lock);
hostdata->connected = NULL;
- hostdata->issue_queue = NULL;
- hostdata->disconnected_queue = NULL;
+ hostdata->sensing = NULL;
+ INIT_LIST_HEAD(&hostdata->autosense);
+ INIT_LIST_HEAD(&hostdata->unissued);
+ INIT_LIST_HEAD(&hostdata->disconnected);
+
hostdata->flags = flags;
INIT_WORK(&hostdata->main_task, NCR5380_main);
+ hostdata->work_q = alloc_workqueue("ncr5380_%d",
+ WQ_UNBOUND | WQ_MEM_RECLAIM,
+ 1, instance->host_no);
+ if (!hostdata->work_q)
+ return -ENOMEM;
prepare_info(instance);
@@ -797,6 +655,72 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
NCR5380_write(TARGET_COMMAND_REG, 0);
NCR5380_write(SELECT_ENABLE_REG, 0);
+ /* Calibrate register polling loop */
+ i = 0;
+ deadline = jiffies + 1;
+ do {
+ cpu_relax();
+ } while (time_is_after_jiffies(deadline));
+ deadline += msecs_to_jiffies(256);
+ do {
+ NCR5380_read(STATUS_REG);
+ ++i;
+ cpu_relax();
+ } while (time_is_after_jiffies(deadline));
+ hostdata->accesses_per_ms = i / 256;
+
+ return 0;
+}
+
+/**
+ * NCR5380_maybe_reset_bus - Detect and correct bus wedge problems.
+ * @instance: adapter to check
+ *
+ * If the system crashed, it may have crashed with a connected target and
+ * the SCSI bus busy. Check for BUS FREE phase. If not, try to abort the
+ * currently established nexus, which we know nothing about. Failing that
+ * do a bus reset.
+ *
+ * Note that a bus reset will cause the chip to assert IRQ.
+ *
+ * Returns 0 if successful, otherwise -ENXIO.
+ */
+
+static int NCR5380_maybe_reset_bus(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ int pass;
+
+ for (pass = 1; (NCR5380_read(STATUS_REG) & SR_BSY) && pass <= 6; ++pass) {
+ switch (pass) {
+ case 1:
+ case 3:
+ case 5:
+ shost_printk(KERN_ERR, instance, "SCSI bus busy, waiting up to five seconds\n");
+ NCR5380_poll_politely(instance,
+ STATUS_REG, SR_BSY, 0, 5 * HZ);
+ break;
+ case 2:
+ shost_printk(KERN_ERR, instance, "bus busy, attempting abort\n");
+ do_abort(instance);
+ break;
+ case 4:
+ shost_printk(KERN_ERR, instance, "bus busy, attempting reset\n");
+ do_reset(instance);
+ /* Wait after a reset; the SCSI standard calls for
+ * 250ms, we wait 500ms to be on the safe side.
+ * But some Toshiba CD-ROMs need ten times that.
+ */
+ if (hostdata->flags & FLAG_TOSHIBA_DELAY)
+ msleep(2500);
+ else
+ msleep(500);
+ break;
+ case 6:
+ shost_printk(KERN_ERR, instance, "bus locked solid\n");
+ return -ENXIO;
+ }
+ }
return 0;
}
@@ -812,6 +736,38 @@ static void NCR5380_exit(struct Scsi_Host *instance)
struct NCR5380_hostdata *hostdata = shost_priv(instance);
cancel_work_sync(&hostdata->main_task);
+ destroy_workqueue(hostdata->work_q);
+}
+
+/**
+ * complete_cmd - finish processing a command and return it to the SCSI ML
+ * @instance: the host instance
+ * @cmd: command to complete
+ */
+
+static void complete_cmd(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ dsprintk(NDEBUG_QUEUES, instance, "complete_cmd: cmd %p\n", cmd);
+
+ if (hostdata->sensing == cmd) {
+ /* Autosense processing ends here */
+ if ((cmd->result & 0xff) != SAM_STAT_GOOD) {
+ scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+ set_host_byte(cmd, DID_ERROR);
+ } else
+ scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+ hostdata->sensing = NULL;
+ }
+
+#ifdef SUPPORT_TAGS
+ cmd_free_tag(cmd);
+#else
+ hostdata->busy[scmd_id(cmd)] &= ~(1 << cmd->device->lun);
+#endif
+ cmd->scsi_done(cmd);
}
/**
@@ -819,7 +775,7 @@ static void NCR5380_exit(struct Scsi_Host *instance)
* @instance: the relevant SCSI adapter
* @cmd: SCSI command
*
- * cmd is added to the per instance issue_queue, with minor
+ * cmd is added to the per-instance issue queue, with minor
* twiddling done to the host specific fields of cmd. If the
* main coroutine is not running, it is restarted.
*/
@@ -828,44 +784,23 @@ static int NCR5380_queue_command(struct Scsi_Host *instance,
struct scsi_cmnd *cmd)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- struct scsi_cmnd *tmp;
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
unsigned long flags;
#if (NDEBUG & NDEBUG_NO_WRITE)
switch (cmd->cmnd[0]) {
case WRITE_6:
case WRITE_10:
- printk(KERN_NOTICE "scsi%d: WRITE attempted with NO_WRITE debugging flag set\n",
- H_NO(cmd));
+ shost_printk(KERN_DEBUG, instance, "WRITE attempted with NDEBUG_NO_WRITE set\n");
cmd->result = (DID_ERROR << 16);
cmd->scsi_done(cmd);
return 0;
}
#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
- /*
- * We use the host_scribble field as a pointer to the next command
- * in a queue
- */
-
- SET_NEXT(cmd, NULL);
cmd->result = 0;
/*
- * Insert the cmd into the issue queue. Note that REQUEST SENSE
- * commands are added to the head of the queue since any command will
- * clear the contingent allegiance condition that exists and the
- * sense data is only guaranteed to be valid while the condition exists.
- */
-
- /* ++guenther: now that the issue queue is being set up, we can lock ST-DMA.
- * Otherwise a running NCR5380_main may steal the lock.
- * Lock before actually inserting due to fairness reasons explained in
- * atari_scsi.c. If we insert first, then it's impossible for this driver
- * to release the lock.
- * Stop timer for this command while waiting for the lock, or timeouts
- * may happen (and they really do), and it's no good if the command doesn't
- * appear in any of the queues.
* ++roman: Just disabling the NCR interrupt isn't sufficient here,
* because also a timer int can trigger an abort or reset, which would
* alter queues and touch the lock.
@@ -873,7 +808,7 @@ static int NCR5380_queue_command(struct Scsi_Host *instance,
if (!NCR5380_acquire_dma_irq(instance))
return SCSI_MLQUEUE_HOST_BUSY;
- local_irq_save(flags);
+ spin_lock_irqsave(&hostdata->lock, flags);
/*
* Insert the cmd into the issue queue. Note that REQUEST SENSE
@@ -882,33 +817,18 @@ static int NCR5380_queue_command(struct Scsi_Host *instance,
* sense data is only guaranteed to be valid while the condition exists.
*/
- if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
- LIST(cmd, hostdata->issue_queue);
- SET_NEXT(cmd, hostdata->issue_queue);
- hostdata->issue_queue = cmd;
- } else {
- for (tmp = (struct scsi_cmnd *)hostdata->issue_queue;
- NEXT(tmp); tmp = NEXT(tmp))
- ;
- LIST(cmd, tmp);
- SET_NEXT(tmp, cmd);
- }
- local_irq_restore(flags);
+ if (cmd->cmnd[0] == REQUEST_SENSE)
+ list_add(&ncmd->list, &hostdata->unissued);
+ else
+ list_add_tail(&ncmd->list, &hostdata->unissued);
- dprintk(NDEBUG_QUEUES, "scsi%d: command added to %s of queue\n", H_NO(cmd),
- (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
+ spin_unlock_irqrestore(&hostdata->lock, flags);
- /* If queue_command() is called from an interrupt (real one or bottom
- * half), we let queue_main() do the job of taking care about main. If it
- * is already running, this is a no-op, else main will be queued.
- *
- * If we're not in an interrupt, we can call NCR5380_main()
- * unconditionally, because it cannot be already running.
- */
- if (in_interrupt() || irqs_disabled())
- queue_main(hostdata);
- else
- NCR5380_main(&hostdata->main_task);
+ dsprintk(NDEBUG_QUEUES, instance, "command %p added to %s of queue\n",
+ cmd, (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
+
+ /* Kick off command processing */
+ queue_work(hostdata->work_q, &hostdata->main_task);
return 0;
}
@@ -917,22 +837,85 @@ static inline void maybe_release_dma_irq(struct Scsi_Host *instance)
struct NCR5380_hostdata *hostdata = shost_priv(instance);
/* Caller does the locking needed to set & test these data atomically */
- if (!hostdata->disconnected_queue &&
- !hostdata->issue_queue &&
+ if (list_empty(&hostdata->disconnected) &&
+ list_empty(&hostdata->unissued) &&
+ list_empty(&hostdata->autosense) &&
!hostdata->connected &&
- !hostdata->retain_dma_intr)
+ !hostdata->selecting)
NCR5380_release_dma_irq(instance);
}
/**
+ * dequeue_next_cmd - dequeue a command for processing
+ * @instance: the scsi host instance
+ *
+ * Priority is given to commands on the autosense queue. These commands
+ * need autosense because of a CHECK CONDITION result.
+ *
+ * Returns a command pointer if a command is found for a target that is
+ * not already busy. Otherwise returns NULL.
+ */
+
+static struct scsi_cmnd *dequeue_next_cmd(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ struct NCR5380_cmd *ncmd;
+ struct scsi_cmnd *cmd;
+
+ if (list_empty(&hostdata->autosense)) {
+ list_for_each_entry(ncmd, &hostdata->unissued, list) {
+ cmd = NCR5380_to_scmd(ncmd);
+ dsprintk(NDEBUG_QUEUES, instance, "dequeue: cmd=%p target=%d busy=0x%02x lun=%llu\n",
+ cmd, scmd_id(cmd), hostdata->busy[scmd_id(cmd)], cmd->device->lun);
+
+ if (
+#ifdef SUPPORT_TAGS
+ !is_lun_busy(cmd, 1)
+#else
+ !(hostdata->busy[scmd_id(cmd)] & (1 << cmd->device->lun))
+#endif
+ ) {
+ list_del(&ncmd->list);
+ dsprintk(NDEBUG_QUEUES, instance,
+ "dequeue: removed %p from issue queue\n", cmd);
+ return cmd;
+ }
+ }
+ } else {
+ /* Autosense processing begins here */
+ ncmd = list_first_entry(&hostdata->autosense,
+ struct NCR5380_cmd, list);
+ list_del(&ncmd->list);
+ cmd = NCR5380_to_scmd(ncmd);
+ dsprintk(NDEBUG_QUEUES, instance,
+ "dequeue: removed %p from autosense queue\n", cmd);
+ scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
+ hostdata->sensing = cmd;
+ return cmd;
+ }
+ return NULL;
+}
+
+static void requeue_cmd(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
+
+ if (hostdata->sensing) {
+ scsi_eh_restore_cmnd(cmd, &hostdata->ses);
+ list_add(&ncmd->list, &hostdata->autosense);
+ hostdata->sensing = NULL;
+ } else
+ list_add(&ncmd->list, &hostdata->unissued);
+}
+
+/**
* NCR5380_main - NCR state machines
*
* NCR5380_main is a coroutine that runs as long as more work can
* be done on the NCR5380 host adapters in a system. Both
* NCR5380_queue_command() and NCR5380_intr() will try to start it
* in case it is not running.
- *
- * Locks: called as its own thread with no locks held.
*/
static void NCR5380_main(struct work_struct *work)
@@ -940,154 +923,69 @@ static void NCR5380_main(struct work_struct *work)
struct NCR5380_hostdata *hostdata =
container_of(work, struct NCR5380_hostdata, main_task);
struct Scsi_Host *instance = hostdata->host;
- struct scsi_cmnd *tmp, *prev;
+ struct scsi_cmnd *cmd;
int done;
- unsigned long flags;
/*
- * We run (with interrupts disabled) until we're sure that none of
- * the host adapters have anything that can be done, at which point
- * we set main_running to 0 and exit.
- *
- * Interrupts are enabled before doing various other internal
- * instructions, after we've decided that we need to run through
- * the loop again.
- *
- * this should prevent any race conditions.
- *
* ++roman: Just disabling the NCR interrupt isn't sufficient here,
* because also a timer int can trigger an abort or reset, which can
* alter queues and touch the Falcon lock.
*/
- /* Tell int handlers main() is now already executing. Note that
- no races are possible here. If an int comes in before
- 'main_running' is set here, and queues/executes main via the
- task queue, it doesn't do any harm, just this instance of main
- won't find any work left to do. */
- if (hostdata->main_running)
- return;
- hostdata->main_running = 1;
-
- local_save_flags(flags);
do {
- local_irq_disable(); /* Freeze request queues */
done = 1;
- if (!hostdata->connected) {
- dprintk(NDEBUG_MAIN, "scsi%d: not connected\n", HOSTNO);
- /*
- * Search through the issue_queue for a command destined
- * for a target that's not busy.
- */
-#if (NDEBUG & NDEBUG_LISTS)
- for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL;
- tmp && (tmp != prev); prev = tmp, tmp = NEXT(tmp))
- ;
- /*printk("%p ", tmp);*/
- if ((tmp == prev) && tmp)
- printk(" LOOP\n");
- /* else printk("\n"); */
-#endif
- for (tmp = (struct scsi_cmnd *) hostdata->issue_queue,
- prev = NULL; tmp; prev = tmp, tmp = NEXT(tmp)) {
- u8 lun = tmp->device->lun;
-
- dprintk(NDEBUG_LISTS,
- "MAIN tmp=%p target=%d busy=%d lun=%d\n",
- tmp, scmd_id(tmp), hostdata->busy[scmd_id(tmp)],
- lun);
- /* When we find one, remove it from the issue queue. */
- /* ++guenther: possible race with Falcon locking */
- if (
-#ifdef SUPPORT_TAGS
- !is_lun_busy( tmp, tmp->cmnd[0] != REQUEST_SENSE)
-#else
- !(hostdata->busy[tmp->device->id] & (1 << lun))
-#endif
- ) {
- /* ++guenther: just to be sure, this must be atomic */
- local_irq_disable();
- if (prev) {
- REMOVE(prev, NEXT(prev), tmp, NEXT(tmp));
- SET_NEXT(prev, NEXT(tmp));
- } else {
- REMOVE(-1, hostdata->issue_queue, tmp, NEXT(tmp));
- hostdata->issue_queue = NEXT(tmp);
- }
- SET_NEXT(tmp, NULL);
- hostdata->retain_dma_intr++;
+ spin_lock_irq(&hostdata->lock);
+ while (!hostdata->connected &&
+ (cmd = dequeue_next_cmd(instance))) {
- /* reenable interrupts after finding one */
- local_irq_restore(flags);
+ dsprintk(NDEBUG_MAIN, instance, "main: dequeued %p\n", cmd);
- /*
- * Attempt to establish an I_T_L nexus here.
- * On success, instance->hostdata->connected is set.
- * On failure, we must add the command back to the
- * issue queue so we can keep trying.
- */
- dprintk(NDEBUG_MAIN, "scsi%d: main(): command for target %d "
- "lun %d removed from issue_queue\n",
- HOSTNO, tmp->device->id, lun);
- /*
- * REQUEST SENSE commands are issued without tagged
- * queueing, even on SCSI-II devices because the
- * contingent allegiance condition exists for the
- * entire unit.
- */
- /* ++roman: ...and the standard also requires that
- * REQUEST SENSE command are untagged.
- */
+ /*
+ * Attempt to establish an I_T_L nexus here.
+ * On success, instance->hostdata->connected is set.
+ * On failure, we must add the command back to the
+ * issue queue so we can keep trying.
+ */
+ /*
+ * REQUEST SENSE commands are issued without tagged
+ * queueing, even on SCSI-II devices because the
+ * contingent allegiance condition exists for the
+ * entire unit.
+ */
+ /* ++roman: ...and the standard also requires that
+ * REQUEST SENSE command are untagged.
+ */
#ifdef SUPPORT_TAGS
- cmd_get_tag(tmp, tmp->cmnd[0] != REQUEST_SENSE);
+ cmd_get_tag(cmd, cmd->cmnd[0] != REQUEST_SENSE);
#endif
- if (!NCR5380_select(instance, tmp)) {
- local_irq_disable();
- hostdata->retain_dma_intr--;
- /* release if target did not response! */
- maybe_release_dma_irq(instance);
- local_irq_restore(flags);
- break;
- } else {
- local_irq_disable();
- LIST(tmp, hostdata->issue_queue);
- SET_NEXT(tmp, hostdata->issue_queue);
- hostdata->issue_queue = tmp;
+ cmd = NCR5380_select(instance, cmd);
+ if (!cmd) {
+ dsprintk(NDEBUG_MAIN, instance, "main: select complete\n");
+ maybe_release_dma_irq(instance);
+ } else {
+ dsprintk(NDEBUG_MAIN | NDEBUG_QUEUES, instance,
+ "main: select failed, returning %p to queue\n", cmd);
+ requeue_cmd(instance, cmd);
#ifdef SUPPORT_TAGS
- cmd_free_tag(tmp);
+ cmd_free_tag(cmd);
#endif
- hostdata->retain_dma_intr--;
- local_irq_restore(flags);
- dprintk(NDEBUG_MAIN, "scsi%d: main(): select() failed, "
- "returned to issue_queue\n", HOSTNO);
- if (hostdata->connected)
- break;
- }
- } /* if target/lun/target queue is not busy */
- } /* for issue_queue */
- } /* if (!hostdata->connected) */
-
+ }
+ }
if (hostdata->connected
#ifdef REAL_DMA
&& !hostdata->dma_len
#endif
) {
- local_irq_restore(flags);
- dprintk(NDEBUG_MAIN, "scsi%d: main: performing information transfer\n",
- HOSTNO);
+ dsprintk(NDEBUG_MAIN, instance, "main: performing information transfer\n");
NCR5380_information_transfer(instance);
- dprintk(NDEBUG_MAIN, "scsi%d: main: done set false\n", HOSTNO);
done = 0;
}
+ spin_unlock_irq(&hostdata->lock);
+ if (!done)
+ cond_resched();
} while (!done);
-
- /* Better allow ints _after_ 'main_running' has been cleared, else
- an interrupt could believe we'll pick up the work it left for
- us, but we won't see it anymore here... */
- hostdata->main_running = 0;
- local_irq_restore(flags);
}
@@ -1096,27 +994,20 @@ static void NCR5380_main(struct work_struct *work)
* Function : void NCR5380_dma_complete (struct Scsi_Host *instance)
*
* Purpose : Called by interrupt handler when DMA finishes or a phase
- * mismatch occurs (which would finish the DMA transfer).
+ * mismatch occurs (which would finish the DMA transfer).
*
* Inputs : instance - this instance of the NCR5380.
- *
*/
static void NCR5380_dma_complete(struct Scsi_Host *instance)
{
- SETUP_HOSTDATA(instance);
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int transferred;
unsigned char **data;
- volatile int *count;
+ int *count;
int saved_data = 0, overrun = 0;
unsigned char p;
- if (!hostdata->connected) {
- printk(KERN_WARNING "scsi%d: received end of DMA interrupt with "
- "no connected cmd\n", HOSTNO);
- return;
- }
-
if (hostdata->read_overruns) {
p = hostdata->connected->SCp.phase;
if (p & SR_IO) {
@@ -1126,15 +1017,11 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance)
(BASR_PHASE_MATCH|BASR_ACK)) {
saved_data = NCR5380_read(INPUT_DATA_REG);
overrun = 1;
- dprintk(NDEBUG_DMA, "scsi%d: read overrun handled\n", HOSTNO);
+ dsprintk(NDEBUG_DMA, instance, "read overrun handled\n");
}
}
}
- dprintk(NDEBUG_DMA, "scsi%d: real DMA transfer complete, basr 0x%X, sr 0x%X\n",
- HOSTNO, NCR5380_read(BUS_AND_STATUS_REG),
- NCR5380_read(STATUS_REG));
-
#if defined(CONFIG_SUN3)
if ((sun3scsi_dma_finish(rq_data_dir(hostdata->connected->request)))) {
pr_err("scsi%d: overrun in UDC counter -- not prepared to deal with this!\n",
@@ -1153,9 +1040,9 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance)
}
#endif
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
transferred = hostdata->dma_len - NCR5380_dma_residual(instance);
hostdata->dma_len = 0;
@@ -1194,140 +1081,160 @@ static void NCR5380_dma_complete(struct Scsi_Host *instance)
* Handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses
* from the disconnected queue, and restarting NCR5380_main()
* as required.
+ *
+ * The chip can assert IRQ in any of six different conditions. The IRQ flag
+ * is then cleared by reading the Reset Parity/Interrupt Register (RPIR).
+ * Three of these six conditions are latched in the Bus and Status Register:
+ * - End of DMA (cleared by ending DMA Mode)
+ * - Parity error (cleared by reading RPIR)
+ * - Loss of BSY (cleared by reading RPIR)
+ * Two conditions have flag bits that are not latched:
+ * - Bus phase mismatch (non-maskable in DMA Mode, cleared by ending DMA Mode)
+ * - Bus reset (non-maskable)
+ * The remaining condition has no flag bit at all:
+ * - Selection/reselection
+ *
+ * Hence, establishing the cause(s) of any interrupt is partly guesswork.
+ * In "The DP8490 and DP5380 Comparison Guide", National Semiconductor
+ * claimed that "the design of the [DP8490] interrupt logic ensures
+ * interrupts will not be lost (they can be on the DP5380)."
+ * The L5380/53C80 datasheet from LOGIC Devices has more details.
+ *
+ * Checking for bus reset by reading RST is futile because of interrupt
+ * latency, but a bus reset will reset chip logic. Checking for parity error
+ * is unnecessary because that interrupt is never enabled. A Loss of BSY
+ * condition will clear DMA Mode. We can tell when this occurs because the
+ * the Busy Monitor interrupt is enabled together with DMA Mode.
*/
static irqreturn_t NCR5380_intr(int irq, void *dev_id)
{
struct Scsi_Host *instance = dev_id;
- int done = 1, handled = 0;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ int handled = 0;
unsigned char basr;
+ unsigned long flags;
- dprintk(NDEBUG_INTR, "scsi%d: NCR5380 irq triggered\n", HOSTNO);
+ spin_lock_irqsave(&hostdata->lock, flags);
- /* Look for pending interrupts */
basr = NCR5380_read(BUS_AND_STATUS_REG);
- dprintk(NDEBUG_INTR, "scsi%d: BASR=%02x\n", HOSTNO, basr);
- /* dispatch to appropriate routine if found and done=0 */
if (basr & BASR_IRQ) {
- NCR5380_dprint(NDEBUG_INTR, instance);
- if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
- done = 0;
- dprintk(NDEBUG_INTR, "scsi%d: SEL interrupt\n", HOSTNO);
- NCR5380_reselect(instance);
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- } else if (basr & BASR_PARITY_ERROR) {
- dprintk(NDEBUG_INTR, "scsi%d: PARITY interrupt\n", HOSTNO);
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- } else if ((NCR5380_read(STATUS_REG) & SR_RST) == SR_RST) {
- dprintk(NDEBUG_INTR, "scsi%d: RESET interrupt\n", HOSTNO);
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- } else {
- /*
- * The rest of the interrupt conditions can occur only during a
- * DMA transfer
- */
+ unsigned char mr = NCR5380_read(MODE_REG);
+ unsigned char sr = NCR5380_read(STATUS_REG);
+
+ dsprintk(NDEBUG_INTR, instance, "IRQ %d, BASR 0x%02x, SR 0x%02x, MR 0x%02x\n",
+ irq, basr, sr, mr);
#if defined(REAL_DMA)
- /*
- * We should only get PHASE MISMATCH and EOP interrupts if we have
- * DMA enabled, so do a sanity check based on the current setting
- * of the MODE register.
+ if ((mr & MR_DMA_MODE) || (mr & MR_MONITOR_BSY)) {
+ /* Probably End of DMA, Phase Mismatch or Loss of BSY.
+ * We ack IRQ after clearing Mode Register. Workarounds
+ * for End of DMA errata need to happen in DMA Mode.
*/
- if ((NCR5380_read(MODE_REG) & MR_DMA_MODE) &&
- ((basr & BASR_END_DMA_TRANSFER) ||
- !(basr & BASR_PHASE_MATCH))) {
+ dsprintk(NDEBUG_INTR, instance, "interrupt in DMA mode\n");
- dprintk(NDEBUG_INTR, "scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
- NCR5380_dma_complete( instance );
- done = 0;
- } else
+ if (hostdata->connected) {
+ NCR5380_dma_complete(instance);
+ queue_work(hostdata->work_q, &hostdata->main_task);
+ } else {
+ NCR5380_write(MODE_REG, MR_BASE);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ }
+ } else
#endif /* REAL_DMA */
- {
-/* MS: Ignore unknown phase mismatch interrupts (caused by EOP interrupt) */
- if (basr & BASR_PHASE_MATCH)
- dprintk(NDEBUG_INTR, "scsi%d: unknown interrupt, "
- "BASR 0x%x, MR 0x%x, SR 0x%x\n",
- HOSTNO, basr, NCR5380_read(MODE_REG),
- NCR5380_read(STATUS_REG));
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ if ((NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_mask) &&
+ (sr & (SR_SEL | SR_IO | SR_BSY | SR_RST)) == (SR_SEL | SR_IO)) {
+ /* Probably reselected */
+ NCR5380_write(SELECT_ENABLE_REG, 0);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+
+ dsprintk(NDEBUG_INTR, instance, "interrupt with SEL and IO\n");
+
+ if (!hostdata->connected) {
+ NCR5380_reselect(instance);
+ queue_work(hostdata->work_q, &hostdata->main_task);
+ }
+ if (!hostdata->connected)
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ } else {
+ /* Probably Bus Reset */
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+
+ dsprintk(NDEBUG_INTR, instance, "unknown interrupt\n");
#ifdef SUN3_SCSI_VME
- dregs->csr |= CSR_DMA_ENABLE;
+ dregs->csr |= CSR_DMA_ENABLE;
#endif
- }
- } /* if !(SELECTION || PARITY) */
+ }
handled = 1;
- } /* BASR & IRQ */ else {
- printk(KERN_NOTICE "scsi%d: interrupt without IRQ bit set in BASR, "
- "BASR 0x%X, MR 0x%X, SR 0x%x\n", HOSTNO, basr,
- NCR5380_read(MODE_REG), NCR5380_read(STATUS_REG));
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ } else {
+ shost_printk(KERN_NOTICE, instance, "interrupt without IRQ bit\n");
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_DMA_ENABLE;
#endif
}
- if (!done) {
- dprintk(NDEBUG_INTR, "scsi%d: in int routine, calling main\n", HOSTNO);
- /* Put a call to NCR5380_main() on the queue... */
- queue_main(shost_priv(instance));
- }
+ spin_unlock_irqrestore(&hostdata->lock, flags);
+
return IRQ_RETVAL(handled);
}
/*
* Function : int NCR5380_select(struct Scsi_Host *instance,
- * struct scsi_cmnd *cmd)
+ * struct scsi_cmnd *cmd)
*
* Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
- * including ARBITRATION, SELECTION, and initial message out for
- * IDENTIFY and queue messages.
+ * including ARBITRATION, SELECTION, and initial message out for
+ * IDENTIFY and queue messages.
*
* Inputs : instance - instantiation of the 5380 driver on which this
- * target lives, cmd - SCSI command to execute.
+ * target lives, cmd - SCSI command to execute.
*
- * Returns : -1 if selection could not execute for some reason,
- * 0 if selection succeeded or failed because the target
- * did not respond.
+ * Returns cmd if selection failed but should be retried,
+ * NULL if selection failed and should not be retried, or
+ * NULL if selection succeeded (hostdata->connected == cmd).
*
* Side effects :
- * If bus busy, arbitration failed, etc, NCR5380_select() will exit
- * with registers as they should have been on entry - ie
- * SELECT_ENABLE will be set appropriately, the NCR5380
- * will cease to drive any SCSI bus signals.
+ * If bus busy, arbitration failed, etc, NCR5380_select() will exit
+ * with registers as they should have been on entry - ie
+ * SELECT_ENABLE will be set appropriately, the NCR5380
+ * will cease to drive any SCSI bus signals.
*
- * If successful : I_T_L or I_T_L_Q nexus will be established,
- * instance->connected will be set to cmd.
- * SELECT interrupt will be disabled.
+ * If successful : I_T_L or I_T_L_Q nexus will be established,
+ * instance->connected will be set to cmd.
+ * SELECT interrupt will be disabled.
*
- * If failed (no target) : cmd->scsi_done() will be called, and the
- * cmd->result host byte set to DID_BAD_TARGET.
+ * If failed (no target) : cmd->scsi_done() will be called, and the
+ * cmd->result host byte set to DID_BAD_TARGET.
*/
-static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
+static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
{
- SETUP_HOSTDATA(instance);
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char tmp[3], phase;
unsigned char *data;
int len;
- unsigned long timeout;
- unsigned long flags;
+ int err;
- hostdata->restart_select = 0;
NCR5380_dprint(NDEBUG_ARBITRATION, instance);
- dprintk(NDEBUG_ARBITRATION, "scsi%d: starting arbitration, id = %d\n", HOSTNO,
- instance->this_id);
+ dsprintk(NDEBUG_ARBITRATION, instance, "starting arbitration, id = %d\n",
+ instance->this_id);
+
+ /*
+ * Arbitration and selection phases are slow and involve dropping the
+ * lock, so we have to watch out for EH. An exception handler may
+ * change 'selecting' to NULL. This function will then return NULL
+ * so that the caller will forget about 'cmd'. (During information
+ * transfer phases, EH may change 'connected' to NULL.)
+ */
+ hostdata->selecting = cmd;
/*
* Set the phase bits to 0, otherwise the NCR5380 won't drive the
* data bus during SELECTION.
*/
- local_irq_save(flags);
- if (hostdata->connected) {
- local_irq_restore(flags);
- return -1;
- }
NCR5380_write(TARGET_COMMAND_REG, 0);
/*
@@ -1337,96 +1244,77 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
NCR5380_write(MODE_REG, MR_ARBITRATE);
- local_irq_restore(flags);
-
- /* Wait for arbitration logic to complete */
-#if defined(NCR_TIMEOUT)
- {
- unsigned long timeout = jiffies + 2*NCR_TIMEOUT;
+ /* The chip now waits for BUS FREE phase. Then after the 800 ns
+ * Bus Free Delay, arbitration will begin.
+ */
- while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS) &&
- time_before(jiffies, timeout) && !hostdata->connected)
- ;
- if (time_after_eq(jiffies, timeout)) {
- printk("scsi : arbitration timeout at %d\n", __LINE__);
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
- }
+ spin_unlock_irq(&hostdata->lock);
+ err = NCR5380_poll_politely2(instance, MODE_REG, MR_ARBITRATE, 0,
+ INITIATOR_COMMAND_REG, ICR_ARBITRATION_PROGRESS,
+ ICR_ARBITRATION_PROGRESS, HZ);
+ spin_lock_irq(&hostdata->lock);
+ if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE)) {
+ /* Reselection interrupt */
+ goto out;
}
-#else /* NCR_TIMEOUT */
- while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS) &&
- !hostdata->connected)
- ;
-#endif
-
- dprintk(NDEBUG_ARBITRATION, "scsi%d: arbitration complete\n", HOSTNO);
-
- if (hostdata->connected) {
+ if (err < 0) {
NCR5380_write(MODE_REG, MR_BASE);
- return -1;
+ shost_printk(KERN_ERR, instance,
+ "select: arbitration timeout\n");
+ goto out;
}
- /*
- * The arbitration delay is 2.2us, but this is a minimum and there is
- * no maximum so we can safely sleep for ceil(2.2) usecs to accommodate
- * the integral nature of udelay().
- *
- */
+ spin_unlock_irq(&hostdata->lock);
+ /* The SCSI-2 arbitration delay is 2.4 us */
udelay(3);
/* Check for lost arbitration */
if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
(NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) ||
- (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
- hostdata->connected) {
+ (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST)) {
NCR5380_write(MODE_REG, MR_BASE);
- dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting MR_ARBITRATE\n",
- HOSTNO);
- return -1;
+ dsprintk(NDEBUG_ARBITRATION, instance, "lost arbitration, deasserting MR_ARBITRATE\n");
+ spin_lock_irq(&hostdata->lock);
+ goto out;
}
- /* after/during arbitration, BSY should be asserted.
- IBM DPES-31080 Version S31Q works now */
- /* Tnx to Thomas_Roesch@m2.maus.de for finding this! (Roman) */
+ /* After/during arbitration, BSY should be asserted.
+ * IBM DPES-31080 Version S31Q works now
+ * Tnx to Thomas_Roesch@m2.maus.de for finding this! (Roman)
+ */
NCR5380_write(INITIATOR_COMMAND_REG,
ICR_BASE | ICR_ASSERT_SEL | ICR_ASSERT_BSY);
- if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
- hostdata->connected) {
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting ICR_ASSERT_SEL\n",
- HOSTNO);
- return -1;
- }
-
/*
* Again, bus clear + bus settle time is 1.2us, however, this is
* a minimum so we'll udelay ceil(1.2)
*/
-#ifdef CONFIG_ATARI_SCSI_TOSHIBA_DELAY
- /* ++roman: But some targets (see above :-) seem to need a bit more... */
- udelay(15);
-#else
- udelay(2);
-#endif
+ if (hostdata->flags & FLAG_TOSHIBA_DELAY)
+ udelay(15);
+ else
+ udelay(2);
- if (hostdata->connected) {
+ spin_lock_irq(&hostdata->lock);
+
+ /* NCR5380_reselect() clears MODE_REG after a reselection interrupt */
+ if (!(NCR5380_read(MODE_REG) & MR_ARBITRATE))
+ goto out;
+
+ if (!hostdata->selecting) {
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- return -1;
+ goto out;
}
- dprintk(NDEBUG_ARBITRATION, "scsi%d: won arbitration\n", HOSTNO);
+ dsprintk(NDEBUG_ARBITRATION, instance, "won arbitration\n");
/*
* Now that we have won arbitration, start Selection process, asserting
* the host and target ID's on the SCSI bus.
*/
- NCR5380_write(OUTPUT_DATA_REG, (hostdata->id_mask | (1 << cmd->device->id)));
+ NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask | (1 << scmd_id(cmd)));
/*
* Raise ATN while SEL is true before BSY goes false from arbitration,
@@ -1434,22 +1322,18 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
* phase immediately after selection.
*/
- NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_BSY |
- ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL ));
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY |
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL);
NCR5380_write(MODE_REG, MR_BASE);
/*
* Reselect interrupts must be turned off prior to the dropping of BSY,
* otherwise we will trigger an interrupt.
*/
-
- if (hostdata->connected) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- return -1;
- }
-
NCR5380_write(SELECT_ENABLE_REG, 0);
+ spin_unlock_irq(&hostdata->lock);
+
/*
* The initiator shall then wait at least two deskew delays and release
* the BSY signal.
@@ -1457,8 +1341,8 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */
/* Reset BSY */
- NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA |
- ICR_ASSERT_ATN | ICR_ASSERT_SEL));
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA |
+ ICR_ASSERT_ATN | ICR_ASSERT_SEL);
/*
* Something weird happens when we cease to drive BSY - looks
@@ -1479,45 +1363,39 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
udelay(1);
- dprintk(NDEBUG_SELECTION, "scsi%d: selecting target %d\n", HOSTNO, cmd->device->id);
+ dsprintk(NDEBUG_SELECTION, instance, "selecting target %d\n", scmd_id(cmd));
/*
* The SCSI specification calls for a 250 ms timeout for the actual
* selection.
*/
- timeout = jiffies + msecs_to_jiffies(250);
-
- /*
- * XXX very interesting - we're seeing a bounce where the BSY we
- * asserted is being reflected / still asserted (propagation delay?)
- * and it's detecting as true. Sigh.
- */
-
-#if 0
- /* ++roman: If a target conformed to the SCSI standard, it wouldn't assert
- * IO while SEL is true. But again, there are some disks out the in the
- * world that do that nevertheless. (Somebody claimed that this announces
- * reselection capability of the target.) So we better skip that test and
- * only wait for BSY... (Famous german words: Der Klügere gibt nach :-)
- */
-
- while (time_before(jiffies, timeout) &&
- !(NCR5380_read(STATUS_REG) & (SR_BSY | SR_IO)))
- ;
+ err = NCR5380_poll_politely(instance, STATUS_REG, SR_BSY, SR_BSY,
+ msecs_to_jiffies(250));
if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) == (SR_SEL | SR_IO)) {
+ spin_lock_irq(&hostdata->lock);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_reselect(instance);
- printk(KERN_ERR "scsi%d: reselection after won arbitration?\n",
- HOSTNO);
+ if (!hostdata->connected)
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ shost_printk(KERN_ERR, instance, "reselection after won arbitration?\n");
+ goto out;
+ }
+
+ if (err < 0) {
+ spin_lock_irq(&hostdata->lock);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
+ /* Can't touch cmd if it has been reclaimed by the scsi ML */
+ if (hostdata->selecting) {
+ cmd->result = DID_BAD_TARGET << 16;
+ complete_cmd(instance, cmd);
+ dsprintk(NDEBUG_SELECTION, instance, "target did not respond within 250ms\n");
+ cmd = NULL;
+ }
+ goto out;
}
-#else
- while (time_before(jiffies, timeout) && !(NCR5380_read(STATUS_REG) & SR_BSY))
- ;
-#endif
/*
* No less than two deskew delays after the initiator detects the
@@ -1529,29 +1407,6 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
- if (!(NCR5380_read(STATUS_REG) & SR_BSY)) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- if (hostdata->targets_present & (1 << cmd->device->id)) {
- printk(KERN_ERR "scsi%d: weirdness\n", HOSTNO);
- if (hostdata->restart_select)
- printk(KERN_NOTICE "\trestart select\n");
- NCR5380_dprint(NDEBUG_ANY, instance);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
- }
- cmd->result = DID_BAD_TARGET << 16;
-#ifdef SUPPORT_TAGS
- cmd_free_tag(cmd);
-#endif
- cmd->scsi_done(cmd);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- dprintk(NDEBUG_SELECTION, "scsi%d: target did not respond within 250ms\n", HOSTNO);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return 0;
- }
-
- hostdata->targets_present |= (1 << cmd->device->id);
-
/*
* Since we followed the SCSI spec, and raised ATN while SEL
* was true but before BSY was false during selection, the information
@@ -1563,16 +1418,27 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
* until it wraps back to 0.
*
* XXX - it turns out that there are some broken SCSI-II devices,
- * which claim to support tagged queuing but fail when more than
- * some number of commands are issued at once.
+ * which claim to support tagged queuing but fail when more than
+ * some number of commands are issued at once.
*/
/* Wait for start of REQ/ACK handshake */
- while (!(NCR5380_read(STATUS_REG) & SR_REQ))
- ;
- dprintk(NDEBUG_SELECTION, "scsi%d: target %d selected, going into MESSAGE OUT phase.\n",
- HOSTNO, cmd->device->id);
+ err = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
+ spin_lock_irq(&hostdata->lock);
+ if (err < 0) {
+ shost_printk(KERN_ERR, instance, "select: REQ timeout\n");
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ goto out;
+ }
+ if (!hostdata->selecting) {
+ do_abort(instance);
+ goto out;
+ }
+
+ dsprintk(NDEBUG_SELECTION, instance, "target %d selected, going into MESSAGE OUT phase.\n",
+ scmd_id(cmd));
tmp[0] = IDENTIFY(1, cmd->device->lun);
#ifdef SUPPORT_TAGS
@@ -1591,11 +1457,12 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
data = tmp;
phase = PHASE_MSGOUT;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_SELECTION, "scsi%d: nexus established.\n", HOSTNO);
+ dsprintk(NDEBUG_SELECTION, instance, "nexus established.\n");
/* XXX need to handle errors here */
+
hostdata->connected = cmd;
#ifndef SUPPORT_TAGS
- hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
+ hostdata->busy[cmd->device->id] |= 1 << cmd->device->lun;
#endif
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_INTR;
@@ -1603,24 +1470,30 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
initialize_SCp(cmd);
- return 0;
+ cmd = NULL;
+
+out:
+ if (!hostdata->selecting)
+ return NULL;
+ hostdata->selecting = NULL;
+ return cmd;
}
/*
* Function : int NCR5380_transfer_pio (struct Scsi_Host *instance,
- * unsigned char *phase, int *count, unsigned char **data)
+ * unsigned char *phase, int *count, unsigned char **data)
*
* Purpose : transfers data in given phase using polled I/O
*
* Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
- * bytes to transfer, **data - pointer to data pointer.
+ * what phase is expected, *count - pointer to number of
+ * bytes to transfer, **data - pointer to data pointer.
*
* Returns : -1 when different phase is entered without transferring
- * maximum number of bytes, 0 if all bytes are transferred or exit
- * is in same phase.
+ * maximum number of bytes, 0 if all bytes are transferred or exit
+ * is in same phase.
*
- * Also, *phase, *count, *data are modified in place.
+ * Also, *phase, *count, *data are modified in place.
*
* XXX Note : handling for bus free may be useful.
*/
@@ -1635,9 +1508,9 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance,
unsigned char *phase, int *count,
unsigned char **data)
{
- register unsigned char p = *phase, tmp;
- register int c = *count;
- register unsigned char *d = *data;
+ unsigned char p = *phase, tmp;
+ int c = *count;
+ unsigned char *d = *data;
/*
* The NCR5380 chip will only drive the SCSI bus when the
@@ -1652,14 +1525,15 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance,
* Wait for assertion of REQ, after which the phase bits will be
* valid
*/
- while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ))
- ;
- dprintk(NDEBUG_HANDSHAKE, "scsi%d: REQ detected\n", HOSTNO);
+ if (NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ) < 0)
+ break;
+
+ dsprintk(NDEBUG_HANDSHAKE, instance, "REQ asserted\n");
/* Check for phase mismatch */
- if ((tmp & PHASE_MASK) != p) {
- dprintk(NDEBUG_PIO, "scsi%d: phase mismatch\n", HOSTNO);
+ if ((NCR5380_read(STATUS_REG) & PHASE_MASK) != p) {
+ dsprintk(NDEBUG_PIO, instance, "phase mismatch\n");
NCR5380_dprint_phase(NDEBUG_PIO, instance);
break;
}
@@ -1684,35 +1558,36 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance,
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA);
NCR5380_dprint(NDEBUG_PIO, instance);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA | ICR_ASSERT_ACK);
+ ICR_ASSERT_DATA | ICR_ASSERT_ACK);
} else {
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA | ICR_ASSERT_ATN);
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN);
NCR5380_dprint(NDEBUG_PIO, instance);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
+ ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
}
} else {
NCR5380_dprint(NDEBUG_PIO, instance);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
}
- while (NCR5380_read(STATUS_REG) & SR_REQ)
- ;
+ if (NCR5380_poll_politely(instance,
+ STATUS_REG, SR_REQ, 0, 5 * HZ) < 0)
+ break;
- dprintk(NDEBUG_HANDSHAKE, "scsi%d: req false, handshake complete\n", HOSTNO);
+ dsprintk(NDEBUG_HANDSHAKE, instance, "REQ negated, handshake complete\n");
- /*
- * We have several special cases to consider during REQ/ACK handshaking :
- * 1. We were in MSGOUT phase, and we are on the last byte of the
- * message. ATN must be dropped as ACK is dropped.
- *
- * 2. We are in a MSGIN phase, and we are on the last byte of the
- * message. We must exit with ACK asserted, so that the calling
- * code may raise ATN before dropping ACK to reject the message.
- *
- * 3. ACK and ATN are clear and the target may proceed as normal.
- */
+/*
+ * We have several special cases to consider during REQ/ACK handshaking :
+ * 1. We were in MSGOUT phase, and we are on the last byte of the
+ * message. ATN must be dropped as ACK is dropped.
+ *
+ * 2. We are in a MSGIN phase, and we are on the last byte of the
+ * message. We must exit with ACK asserted, so that the calling
+ * code may raise ATN before dropping ACK to reject the message.
+ *
+ * 3. ACK and ATN are clear and the target may proceed as normal.
+ */
if (!(p == PHASE_MSGIN && c == 1)) {
if (p == PHASE_MSGOUT && c > 1)
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
@@ -1721,16 +1596,16 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance,
}
} while (--c);
- dprintk(NDEBUG_PIO, "scsi%d: residual %d\n", HOSTNO, c);
+ dsprintk(NDEBUG_PIO, instance, "residual %d\n", c);
*count = c;
*data = d;
tmp = NCR5380_read(STATUS_REG);
/* The phase read from the bus is valid if either REQ is (already)
- * asserted or if ACK hasn't been released yet. The latter is the case if
- * we're in MSGIN and all wanted bytes have been received.
+ * asserted or if ACK hasn't been released yet. The latter applies if
+ * we're in MSG IN, DATA IN or STATUS and all bytes have been received.
*/
- if ((tmp & SR_REQ) || (p == PHASE_MSGIN && c == 0))
+ if ((tmp & SR_REQ) || ((tmp & SR_IO) && c == 0))
*phase = tmp & PHASE_MASK;
else
*phase = PHASE_UNKNOWN;
@@ -1741,19 +1616,45 @@ static int NCR5380_transfer_pio(struct Scsi_Host *instance,
return -1;
}
-/*
- * Function : do_abort (Scsi_Host *host)
+/**
+ * do_reset - issue a reset command
+ * @instance: adapter to reset
*
- * Purpose : abort the currently established nexus. Should only be
- * called from a routine which can drop into a
+ * Issue a reset sequence to the NCR5380 and try and get the bus
+ * back into sane shape.
*
- * Returns : 0 on success, -1 on failure.
+ * This clears the reset interrupt flag because there may be no handler for
+ * it. When the driver is initialized, the NCR5380_intr() handler has not yet
+ * been installed. And when in EH we may have released the ST DMA interrupt.
+ */
+
+static void do_reset(struct Scsi_Host *instance)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ NCR5380_write(TARGET_COMMAND_REG,
+ PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
+ udelay(50);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ local_irq_restore(flags);
+}
+
+/**
+ * do_abort - abort the currently established nexus by going to
+ * MESSAGE OUT phase and sending an ABORT message.
+ * @instance: relevant scsi host instance
+ *
+ * Returns 0 on success, -1 on failure.
*/
static int do_abort(struct Scsi_Host *instance)
{
- unsigned char tmp, *msgptr, phase;
+ unsigned char *msgptr, phase, tmp;
int len;
+ int rc;
/* Request message out phase */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
@@ -1768,16 +1669,20 @@ static int do_abort(struct Scsi_Host *instance)
* the target sees, so we just handshake.
*/
- while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ))
- ;
+ rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, 10 * HZ);
+ if (rc < 0)
+ goto timeout;
+
+ tmp = NCR5380_read(STATUS_REG) & PHASE_MASK;
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
- if ((tmp & PHASE_MASK) != PHASE_MSGOUT) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN |
- ICR_ASSERT_ACK);
- while (NCR5380_read(STATUS_REG) & SR_REQ)
- ;
+ if (tmp != PHASE_MSGOUT) {
+ NCR5380_write(INITIATOR_COMMAND_REG,
+ ICR_BASE | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
+ rc = NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, 0, 3 * HZ);
+ if (rc < 0)
+ goto timeout;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
}
@@ -1793,26 +1698,29 @@ static int do_abort(struct Scsi_Host *instance)
*/
return len ? -1 : 0;
+
+timeout:
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ return -1;
}
#if defined(REAL_DMA)
/*
* Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
- * unsigned char *phase, int *count, unsigned char **data)
+ * unsigned char *phase, int *count, unsigned char **data)
*
* Purpose : transfers data in given phase using either real
- * or pseudo DMA.
+ * or pseudo DMA.
*
* Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
- * bytes to transfer, **data - pointer to data pointer.
+ * what phase is expected, *count - pointer to number of
+ * bytes to transfer, **data - pointer to data pointer.
*
* Returns : -1 when different phase is entered without transferring
- * maximum number of bytes, 0 if all bytes or transferred or exit
- * is in same phase.
- *
- * Also, *phase, *count, *data are modified in place.
+ * maximum number of bytes, 0 if all bytes or transferred or exit
+ * is in same phase.
*
+ * Also, *phase, *count, *data are modified in place.
*/
@@ -1820,10 +1728,9 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
unsigned char *phase, int *count,
unsigned char **data)
{
- SETUP_HOSTDATA(instance);
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
register int c = *count;
register unsigned char p = *phase;
- unsigned long flags;
#if defined(CONFIG_SUN3)
/* sanity check */
@@ -1834,29 +1741,22 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
}
hostdata->dma_len = c;
- dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n",
- instance->host_no, (p & SR_IO) ? "reading" : "writing",
- c, (p & SR_IO) ? "to" : "from", *data);
+ dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n",
+ (p & SR_IO) ? "receive" : "send", c, *data);
/* netbsd turns off ints here, why not be safe and do it too */
- local_irq_save(flags);
/* send start chain */
sun3scsi_dma_start(c, *data);
+ NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
+ MR_ENABLE_EOP_INTR);
if (p & SR_IO) {
- NCR5380_write(TARGET_COMMAND_REG, 1);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(INITIATOR_COMMAND_REG, 0);
- NCR5380_write(MODE_REG,
- (NCR5380_read(MODE_REG) | MR_DMA_MODE | MR_ENABLE_EOP_INTR));
NCR5380_write(START_DMA_INITIATOR_RECEIVE_REG, 0);
} else {
- NCR5380_write(TARGET_COMMAND_REG, 0);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_DATA);
- NCR5380_write(MODE_REG,
- (NCR5380_read(MODE_REG) | MR_DMA_MODE | MR_ENABLE_EOP_INTR));
NCR5380_write(START_DMA_SEND_REG, 0);
}
@@ -1864,8 +1764,6 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
dregs->csr |= CSR_DMA_ENABLE;
#endif
- local_irq_restore(flags);
-
sun3_dma_active = 1;
#else /* !defined(CONFIG_SUN3) */
@@ -1880,25 +1778,20 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
if (hostdata->read_overruns && (p & SR_IO))
c -= hostdata->read_overruns;
- dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n",
- HOSTNO, (p & SR_IO) ? "reading" : "writing",
- c, (p & SR_IO) ? "to" : "from", d);
+ dsprintk(NDEBUG_DMA, instance, "initializing DMA %s: length %d, address %p\n",
+ (p & SR_IO) ? "receive" : "send", c, d);
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
-
-#ifdef REAL_DMA
- NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_EOP_INTR | MR_MONITOR_BSY);
-#endif /* def REAL_DMA */
+ NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_MONITOR_BSY |
+ MR_ENABLE_EOP_INTR);
if (!(hostdata->flags & FLAG_LATE_DMA_SETUP)) {
/* On the Medusa, it is a must to initialize the DMA before
* starting the NCR. This is also the cleaner way for the TT.
*/
- local_irq_save(flags);
hostdata->dma_len = (p & SR_IO) ?
NCR5380_dma_read_setup(instance, d, c) :
NCR5380_dma_write_setup(instance, d, c);
- local_irq_restore(flags);
}
if (p & SR_IO)
@@ -1912,11 +1805,9 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
/* On the Falcon, the DMA setup must be done after the last */
/* NCR access, else the DMA setup gets trashed!
*/
- local_irq_save(flags);
hostdata->dma_len = (p & SR_IO) ?
NCR5380_dma_read_setup(instance, d, c) :
NCR5380_dma_write_setup(instance, d, c);
- local_irq_restore(flags);
}
#endif /* !defined(CONFIG_SUN3) */
@@ -1928,23 +1819,22 @@ static int NCR5380_transfer_dma(struct Scsi_Host *instance,
* Function : NCR5380_information_transfer (struct Scsi_Host *instance)
*
* Purpose : run through the various SCSI phases and do as the target
- * directs us to. Operates on the currently connected command,
- * instance->connected.
+ * directs us to. Operates on the currently connected command,
+ * instance->connected.
*
* Inputs : instance, instance for which we are doing commands
*
* Side effects : SCSI things happen, the disconnected queue will be
- * modified if a command disconnects, *instance->connected will
- * change.
+ * modified if a command disconnects, *instance->connected will
+ * change.
*
* XXX Note : we need to watch for bus free or a reset condition here
- * to recover from an unexpected bus free condition.
+ * to recover from an unexpected bus free condition.
*/
static void NCR5380_information_transfer(struct Scsi_Host *instance)
{
- SETUP_HOSTDATA(instance);
- unsigned long flags;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char msgout = NOP;
int sink = 0;
int len;
@@ -1953,13 +1843,15 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
#endif
unsigned char *data;
unsigned char phase, tmp, extended_msg[10], old_phase = 0xff;
- struct scsi_cmnd *cmd = (struct scsi_cmnd *) hostdata->connected;
+ struct scsi_cmnd *cmd;
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_INTR;
#endif
- while (1) {
+ while ((cmd = hostdata->connected)) {
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
+
tmp = NCR5380_read(STATUS_REG);
/* We only have a valid SCSI phase when REQ is asserted */
if (tmp & SR_REQ) {
@@ -1984,7 +1876,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
/* this command setup for dma yet? */
if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != cmd)) {
if (cmd->request->cmd_type == REQ_TYPE_FS) {
- sun3scsi_dma_setup(d, count,
+ sun3scsi_dma_setup(instance, d, count,
rq_data_dir(cmd->request));
sun3_dma_setup_done = cmd;
}
@@ -2000,11 +1892,11 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN |
- ICR_ASSERT_ACK);
+ ICR_ASSERT_ACK);
while (NCR5380_read(STATUS_REG) & SR_REQ)
;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_ATN);
+ ICR_ASSERT_ATN);
sink = 0;
continue;
}
@@ -2012,12 +1904,11 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
switch (phase) {
case PHASE_DATAOUT:
#if (NDEBUG & NDEBUG_NO_DATAOUT)
- printk("scsi%d: NDEBUG_NO_DATAOUT set, attempted DATAOUT "
- "aborted\n", HOSTNO);
+ shost_printk(KERN_DEBUG, instance, "NDEBUG_NO_DATAOUT set, attempted DATAOUT aborted\n");
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
return;
#endif
case PHASE_DATAIN:
@@ -2031,13 +1922,10 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
--cmd->SCp.buffers_residual;
cmd->SCp.this_residual = cmd->SCp.buffer->length;
cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
- /* ++roman: Try to merge some scatter-buffers if
- * they are at contiguous physical addresses.
- */
merge_contiguous_buffers(cmd);
- dprintk(NDEBUG_INFORMATION, "scsi%d: %d bytes and %d buffers left\n",
- HOSTNO, cmd->SCp.this_residual,
- cmd->SCp.buffers_residual);
+ dsprintk(NDEBUG_INFORMATION, instance, "%d bytes and %d buffers left\n",
+ cmd->SCp.this_residual,
+ cmd->SCp.buffers_residual);
}
/*
@@ -2051,16 +1939,18 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
*/
/* ++roman: I suggest, this should be
- * #if def(REAL_DMA)
+ * #if def(REAL_DMA)
* instead of leaving REAL_DMA out.
*/
#if defined(REAL_DMA)
- if (
#if !defined(CONFIG_SUN3)
- !cmd->device->borken &&
+ transfersize = 0;
+ if (!cmd->device->borken)
#endif
- (transfersize = NCR5380_dma_xfer_len(instance, cmd, phase)) >= DMA_MIN_SIZE) {
+ transfersize = NCR5380_dma_xfer_len(instance, cmd, phase);
+
+ if (transfersize >= DMA_MIN_SIZE) {
len = transfersize;
cmd->SCp.phase = phase;
if (NCR5380_transfer_dma(instance, &phase,
@@ -2068,16 +1958,15 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
/*
* If the watchdog timer fires, all future
* accesses to this device will use the
- * polled-IO. */
+ * polled-IO.
+ */
scmd_printk(KERN_INFO, cmd,
"switching to slow handshake\n");
cmd->device->borken = 1;
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_ATN);
sink = 1;
do_abort(instance);
cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
+ complete_cmd(instance, cmd);
/* XXX - need to source or sink data here, as appropriate */
} else {
#ifdef REAL_DMA
@@ -2093,9 +1982,13 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
}
} else
#endif /* defined(REAL_DMA) */
+ {
+ spin_unlock_irq(&hostdata->lock);
NCR5380_transfer_pio(instance, &phase,
- (int *)&cmd->SCp.this_residual,
- (unsigned char **)&cmd->SCp.ptr);
+ (int *)&cmd->SCp.this_residual,
+ (unsigned char **)&cmd->SCp.ptr);
+ spin_lock_irq(&hostdata->lock);
+ }
#if defined(CONFIG_SUN3) && defined(REAL_DMA)
/* if we had intended to dma that command clear it */
if (sun3_dma_setup_done == cmd)
@@ -2105,162 +1998,64 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
case PHASE_MSGIN:
len = 1;
data = &tmp;
- NCR5380_write(SELECT_ENABLE_REG, 0); /* disable reselects */
NCR5380_transfer_pio(instance, &phase, &len, &data);
cmd->SCp.Message = tmp;
switch (tmp) {
- /*
- * Linking lets us reduce the time required to get the
- * next command out to the device, hopefully this will
- * mean we don't waste another revolution due to the delays
- * required by ARBITRATION and another SELECTION.
- *
- * In the current implementation proposal, low level drivers
- * merely have to start the next command, pointed to by
- * next_link, done() is called as with unlinked commands.
- */
-#ifdef LINKED
- case LINKED_CMD_COMPLETE:
- case LINKED_FLG_CMD_COMPLETE:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %llu linked command "
- "complete.\n", HOSTNO, cmd->device->id, cmd->device->lun);
-
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /*
- * Sanity check : A linked command should only terminate
- * with one of these messages if there are more linked
- * commands available.
- */
-
- if (!cmd->next_link) {
- printk(KERN_NOTICE "scsi%d: target %d lun %llu "
- "linked command complete, no next_link\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
- sink = 1;
- do_abort(instance);
- return;
- }
-
- initialize_SCp(cmd->next_link);
- /* The next command is still part of this process; copy it
- * and don't free it! */
- cmd->next_link->tag = cmd->tag;
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %llu linked request "
- "done, calling scsi_done().\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
- cmd->scsi_done(cmd);
- cmd = hostdata->connected;
- break;
-#endif /* def LINKED */
case ABORT:
case COMMAND_COMPLETE:
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d, lun %llu "
- "completed\n", HOSTNO, cmd->device->id, cmd->device->lun);
+ dsprintk(NDEBUG_QUEUES, instance,
+ "COMMAND COMPLETE %p target %d lun %llu\n",
+ cmd, scmd_id(cmd), cmd->device->lun);
- local_irq_save(flags);
- hostdata->retain_dma_intr++;
hostdata->connected = NULL;
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
if (status_byte(cmd->SCp.Status) == QUEUE_FULL) {
- /* Turn a QUEUE FULL status into BUSY, I think the
- * mid level cannot handle QUEUE FULL :-( (The
- * command is retried after BUSY). Also update our
- * queue size to the number of currently issued
- * commands now.
- */
- /* ++Andreas: the mid level code knows about
- QUEUE_FULL now. */
- struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][cmd->device->lun];
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %llu returned "
- "QUEUE_FULL after %d commands\n",
- HOSTNO, cmd->device->id, cmd->device->lun,
- ta->nr_allocated);
+ u8 lun = cmd->device->lun;
+ struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun];
+
+ dsprintk(NDEBUG_TAGS, instance,
+ "QUEUE_FULL %p target %d lun %d nr_allocated %d\n",
+ cmd, scmd_id(cmd), lun, ta->nr_allocated);
if (ta->queue_size > ta->nr_allocated)
- ta->nr_allocated = ta->queue_size;
+ ta->queue_size = ta->nr_allocated;
}
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
#endif
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-
- /*
- * I'm not sure what the correct thing to do here is :
- *
- * If the command that just executed is NOT a request
- * sense, the obvious thing to do is to set the result
- * code to the values of the stored parameters.
- *
- * If it was a REQUEST SENSE command, we need some way to
- * differentiate between the failure code of the original
- * and the failure code of the REQUEST sense - the obvious
- * case is success, where we fall through and leave the
- * result code unchanged.
- *
- * The non-obvious place is where the REQUEST SENSE failed
- */
-
- if (cmd->cmnd[0] != REQUEST_SENSE)
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- else if (status_byte(cmd->SCp.Status) != GOOD)
- cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16);
-
- if ((cmd->cmnd[0] == REQUEST_SENSE) &&
- hostdata->ses.cmd_len) {
- scsi_eh_restore_cmnd(cmd, &hostdata->ses);
- hostdata->ses.cmd_len = 0 ;
- }
-
- if ((cmd->cmnd[0] != REQUEST_SENSE) &&
- (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
- scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
-
- dprintk(NDEBUG_AUTOSENSE, "scsi%d: performing request sense\n", HOSTNO);
- LIST(cmd,hostdata->issue_queue);
- SET_NEXT(cmd, hostdata->issue_queue);
- hostdata->issue_queue = (struct scsi_cmnd *) cmd;
- dprintk(NDEBUG_QUEUES, "scsi%d: REQUEST SENSE added to head of "
- "issue queue\n", H_NO(cmd));
- } else {
- cmd->scsi_done(cmd);
+ cmd->result &= ~0xffff;
+ cmd->result |= cmd->SCp.Status;
+ cmd->result |= cmd->SCp.Message << 8;
+
+ if (cmd->cmnd[0] == REQUEST_SENSE)
+ complete_cmd(instance, cmd);
+ else {
+ if (cmd->SCp.Status == SAM_STAT_CHECK_CONDITION ||
+ cmd->SCp.Status == SAM_STAT_COMMAND_TERMINATED) {
+ dsprintk(NDEBUG_QUEUES, instance, "autosense: adding cmd %p to tail of autosense queue\n",
+ cmd);
+ list_add_tail(&ncmd->list,
+ &hostdata->autosense);
+ } else
+ complete_cmd(instance, cmd);
}
- local_irq_restore(flags);
-
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
/*
* Restore phase bits to 0 so an interrupted selection,
* arbitration can resume.
*/
NCR5380_write(TARGET_COMMAND_REG, 0);
- while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
- barrier();
+ /* Enable reselect interrupts */
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- local_irq_save(flags);
- hostdata->retain_dma_intr--;
- /* ++roman: For Falcon SCSI, release the lock on the
- * ST-DMA here if no other commands are waiting on the
- * disconnected queue.
- */
maybe_release_dma_irq(instance);
- local_irq_restore(flags);
return;
case MESSAGE_REJECT:
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
switch (hostdata->last_message) {
case HEAD_OF_QUEUE_TAG:
case ORDERED_QUEUE_TAG:
@@ -2274,27 +2069,20 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
cmd->device->tagged_supported = 0;
hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
cmd->tag = TAG_NONE;
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %llu rejected "
- "QUEUE_TAG message; tagged queuing "
- "disabled\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
+ dsprintk(NDEBUG_TAGS, instance, "target %d lun %llu rejected QUEUE_TAG message; tagged queuing disabled\n",
+ scmd_id(cmd), cmd->device->lun);
break;
}
break;
case DISCONNECT:
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- local_irq_save(flags);
- cmd->device->disconnect = 1;
- LIST(cmd,hostdata->disconnected_queue);
- SET_NEXT(cmd, hostdata->disconnected_queue);
hostdata->connected = NULL;
- hostdata->disconnected_queue = cmd;
- local_irq_restore(flags);
- dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d lun %llu was "
- "moved from connected to the "
- "disconnected_queue\n", HOSTNO,
- cmd->device->id, cmd->device->lun);
+ list_add(&ncmd->list, &hostdata->disconnected);
+ dsprintk(NDEBUG_INFORMATION | NDEBUG_QUEUES,
+ instance, "connected command %p for target %d lun %llu moved to disconnected queue\n",
+ cmd, scmd_id(cmd), cmd->device->lun);
+
/*
* Restore phase bits to 0 so an interrupted selection,
* arbitration can resume.
@@ -2303,9 +2091,6 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
/* Enable reselect interrupts */
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /* Wait for bus free to avoid nasty timeouts */
- while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
- barrier();
#ifdef SUN3_SCSI_VME
dregs->csr |= CSR_DMA_ENABLE;
#endif
@@ -2324,37 +2109,30 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
case RESTORE_POINTERS:
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
break;
case EXTENDED_MESSAGE:
/*
- * Extended messages are sent in the following format :
- * Byte
- * 0 EXTENDED_MESSAGE == 1
- * 1 length (includes one byte for code, doesn't
- * include first two bytes)
- * 2 code
- * 3..length+1 arguments
- *
- * Start the extended message buffer with the EXTENDED_MESSAGE
+ * Start the message buffer with the EXTENDED_MESSAGE
* byte, since spi_print_msg() wants the whole thing.
*/
extended_msg[0] = EXTENDED_MESSAGE;
/* Accept first byte by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- dprintk(NDEBUG_EXTENDED, "scsi%d: receiving extended message\n", HOSTNO);
+ spin_unlock_irq(&hostdata->lock);
+
+ dsprintk(NDEBUG_EXTENDED, instance, "receiving extended message\n");
len = 2;
data = extended_msg + 1;
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_EXTENDED, "scsi%d: length=%d, code=0x%02x\n", HOSTNO,
- (int)extended_msg[1], (int)extended_msg[2]);
+ dsprintk(NDEBUG_EXTENDED, instance, "length %d, code 0x%02x\n",
+ (int)extended_msg[1],
+ (int)extended_msg[2]);
- if (!len && extended_msg[1] <=
- (sizeof(extended_msg) - 1)) {
+ if (!len && extended_msg[1] > 0 &&
+ extended_msg[1] <= sizeof(extended_msg) - 2) {
/* Accept third byte by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
len = extended_msg[1] - 1;
@@ -2362,8 +2140,8 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_EXTENDED, "scsi%d: message received, residual %d\n",
- HOSTNO, len);
+ dsprintk(NDEBUG_EXTENDED, instance, "message received, residual %d\n",
+ len);
switch (extended_msg[2]) {
case EXTENDED_SDTR:
@@ -2373,15 +2151,18 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
tmp = 0;
}
} else if (len) {
- printk(KERN_NOTICE "scsi%d: error receiving "
- "extended message\n", HOSTNO);
+ shost_printk(KERN_ERR, instance, "error receiving extended message\n");
tmp = 0;
} else {
- printk(KERN_NOTICE "scsi%d: extended message "
- "code %02x length %d is too long\n",
- HOSTNO, extended_msg[2], extended_msg[1]);
+ shost_printk(KERN_NOTICE, instance, "extended message code %02x length %d is too long\n",
+ extended_msg[2], extended_msg[1]);
tmp = 0;
}
+
+ spin_lock_irq(&hostdata->lock);
+ if (!hostdata->connected)
+ return;
+
/* Fall through to reject message */
/*
@@ -2390,8 +2171,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
*/
default:
if (!tmp) {
- printk(KERN_INFO "scsi%d: rejecting message ",
- instance->host_no);
+ shost_printk(KERN_ERR, instance, "rejecting message ");
spi_print_msg(extended_msg);
printk("\n");
} else if (tmp != EXTENDED_MESSAGE)
@@ -2414,18 +2194,11 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
hostdata->last_message = msgout;
NCR5380_transfer_pio(instance, &phase, &len, &data);
if (msgout == ABORT) {
- local_irq_save(flags);
-#ifdef SUPPORT_TAGS
- cmd_free_tag(cmd);
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
-#endif
hostdata->connected = NULL;
cmd->result = DID_ERROR << 16;
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
+ complete_cmd(instance, cmd);
maybe_release_dma_irq(instance);
- local_irq_restore(flags);
- cmd->scsi_done(cmd);
+ NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
}
msgout = NOP;
@@ -2447,22 +2220,25 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
cmd->SCp.Status = tmp;
break;
default:
- printk("scsi%d: unknown phase\n", HOSTNO);
+ shost_printk(KERN_ERR, instance, "unknown phase\n");
NCR5380_dprint(NDEBUG_ANY, instance);
} /* switch(phase) */
- } /* if (tmp * SR_REQ) */
- } /* while (1) */
+ } else {
+ spin_unlock_irq(&hostdata->lock);
+ NCR5380_poll_politely(instance, STATUS_REG, SR_REQ, SR_REQ, HZ);
+ spin_lock_irq(&hostdata->lock);
+ }
+ }
}
/*
* Function : void NCR5380_reselect (struct Scsi_Host *instance)
*
* Purpose : does reselection, initializing the instance->connected
- * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
- * nexus has been reestablished,
+ * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
+ * nexus has been reestablished,
*
* Inputs : instance - this instance of the NCR5380.
- *
*/
@@ -2471,7 +2247,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
static void NCR5380_reselect(struct Scsi_Host *instance)
{
- SETUP_HOSTDATA(instance);
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned char target_mask;
unsigned char lun;
#ifdef SUPPORT_TAGS
@@ -2480,7 +2256,8 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
unsigned char msg[3];
int __maybe_unused len;
unsigned char __maybe_unused *data, __maybe_unused phase;
- struct scsi_cmnd *tmp = NULL, *prev;
+ struct NCR5380_cmd *ncmd;
+ struct scsi_cmnd *tmp;
/*
* Disable arbitration, etc. since the host adapter obviously
@@ -2488,11 +2265,10 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
*/
NCR5380_write(MODE_REG, MR_BASE);
- hostdata->restart_select = 1;
target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
- dprintk(NDEBUG_RESELECTION, "scsi%d: reselect\n", HOSTNO);
+ dsprintk(NDEBUG_RESELECTION, instance, "reselect\n");
/*
* At this point, we have detected that our SCSI ID is on the bus,
@@ -2504,17 +2280,22 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
*/
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
-
- while (NCR5380_read(STATUS_REG) & SR_SEL)
- ;
+ if (NCR5380_poll_politely(instance,
+ STATUS_REG, SR_SEL, 0, 2 * HZ) < 0) {
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ return;
+ }
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
/*
* Wait for target to go into MSGIN.
*/
- while (!(NCR5380_read(STATUS_REG) & SR_REQ))
- ;
+ if (NCR5380_poll_politely(instance,
+ STATUS_REG, SR_REQ, SR_REQ, 2 * HZ) < 0) {
+ do_abort(instance);
+ return;
+ }
#if defined(CONFIG_SUN3) && defined(REAL_DMA)
/* acknowledge toggle to MSGIN */
@@ -2527,15 +2308,21 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
data = msg;
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
+
+ if (len) {
+ do_abort(instance);
+ return;
+ }
#endif
if (!(msg[0] & 0x80)) {
- printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO);
+ shost_printk(KERN_ERR, instance, "expecting IDENTIFY message, got ");
spi_print_msg(msg);
+ printk("\n");
do_abort(instance);
return;
}
- lun = (msg[0] & 0x07);
+ lun = msg[0] & 0x07;
#if defined(SUPPORT_TAGS) && !defined(CONFIG_SUN3)
/* If the phase is still MSGIN, the target wants to send some more
@@ -2551,8 +2338,8 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
msg[1] == SIMPLE_QUEUE_TAG)
tag = msg[2];
- dprintk(NDEBUG_TAGS, "scsi%d: target mask %02x, lun %d sent tag %d at "
- "reselection\n", HOSTNO, target_mask, lun, tag);
+ dsprintk(NDEBUG_TAGS, instance, "reselect: target mask %02x, lun %d sent tag %d\n",
+ target_mask, lun, tag);
}
#endif
@@ -2561,36 +2348,34 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
* just reestablished, and remove it from the disconnected queue.
*/
- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL;
- tmp; prev = tmp, tmp = NEXT(tmp)) {
- if ((target_mask == (1 << tmp->device->id)) && (lun == tmp->device->lun)
+ tmp = NULL;
+ list_for_each_entry(ncmd, &hostdata->disconnected, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ if (target_mask == (1 << scmd_id(cmd)) &&
+ lun == (u8)cmd->device->lun
#ifdef SUPPORT_TAGS
- && (tag == tmp->tag)
+ && (tag == cmd->tag)
#endif
) {
- if (prev) {
- REMOVE(prev, NEXT(prev), tmp, NEXT(tmp));
- SET_NEXT(prev, NEXT(tmp));
- } else {
- REMOVE(-1, hostdata->disconnected_queue, tmp, NEXT(tmp));
- hostdata->disconnected_queue = NEXT(tmp);
- }
- SET_NEXT(tmp, NULL);
+ list_del(&ncmd->list);
+ tmp = cmd;
break;
}
}
- if (!tmp) {
- printk(KERN_WARNING "scsi%d: warning: target bitmask %02x lun %d "
-#ifdef SUPPORT_TAGS
- "tag %d "
-#endif
- "not in disconnected_queue.\n",
- HOSTNO, target_mask, lun
+ if (tmp) {
+ dsprintk(NDEBUG_RESELECTION | NDEBUG_QUEUES, instance,
+ "reselect: removed %p from disconnected queue\n", tmp);
+ } else {
+
#ifdef SUPPORT_TAGS
- , tag
+ shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d tag %d not in disconnected queue.\n",
+ target_mask, lun, tag);
+#else
+ shost_printk(KERN_ERR, instance, "target bitmask 0x%02x lun %d not in disconnected queue.\n",
+ target_mask, lun);
#endif
- );
/*
* Since we have an established nexus that we can't do anything
* with, we must abort it.
@@ -2614,7 +2399,8 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
}
/* setup this command for dma if not already */
if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != tmp)) {
- sun3scsi_dma_setup(d, count, rq_data_dir(tmp->request));
+ sun3scsi_dma_setup(instance, d, count,
+ rq_data_dir(tmp->request));
sun3_dma_setup_done = tmp;
}
}
@@ -2639,235 +2425,196 @@ static void NCR5380_reselect(struct Scsi_Host *instance)
if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
msg[1] == SIMPLE_QUEUE_TAG)
tag = msg[2];
- dprintk(NDEBUG_TAGS, "scsi%d: target mask %02x, lun %d sent tag %d at reselection\n"
- HOSTNO, target_mask, lun, tag);
+ dsprintk(NDEBUG_TAGS, instance, "reselect: target mask %02x, lun %d sent tag %d\n"
+ target_mask, lun, tag);
}
#endif
hostdata->connected = tmp;
- dprintk(NDEBUG_RESELECTION, "scsi%d: nexus established, target = %d, lun = %llu, tag = %d\n",
- HOSTNO, tmp->device->id, tmp->device->lun, tmp->tag);
+ dsprintk(NDEBUG_RESELECTION, instance, "nexus established, target %d, lun %llu, tag %d\n",
+ scmd_id(tmp), tmp->device->lun, tmp->tag);
}
-/*
- * Function : int NCR5380_abort (struct scsi_cmnd *cmd)
- *
- * Purpose : abort a command
- *
- * Inputs : cmd - the scsi_cmnd to abort, code - code to set the
- * host byte of the result field to, if zero DID_ABORTED is
- * used.
- *
- * Returns : SUCCESS - success, FAILED on failure.
- *
- * XXX - there is no way to abort the command that is currently
- * connected, you have to wait for it to complete. If this is
- * a problem, we could implement longjmp() / setjmp(), setjmp()
- * called where the loop started in NCR5380_main().
+/**
+ * list_find_cmd - test for presence of a command in a linked list
+ * @haystack: list of commands
+ * @needle: command to search for
*/
-static
-int NCR5380_abort(struct scsi_cmnd *cmd)
+static bool list_find_cmd(struct list_head *haystack,
+ struct scsi_cmnd *needle)
{
- struct Scsi_Host *instance = cmd->device->host;
- SETUP_HOSTDATA(instance);
- struct scsi_cmnd *tmp, **prev;
- unsigned long flags;
+ struct NCR5380_cmd *ncmd;
- scmd_printk(KERN_NOTICE, cmd, "aborting command\n");
+ list_for_each_entry(ncmd, haystack, list)
+ if (NCR5380_to_scmd(ncmd) == needle)
+ return true;
+ return false;
+}
- NCR5380_print_status(instance);
+/**
+ * list_remove_cmd - remove a command from linked list
+ * @haystack: list of commands
+ * @needle: command to remove
+ */
- local_irq_save(flags);
+static bool list_del_cmd(struct list_head *haystack,
+ struct scsi_cmnd *needle)
+{
+ if (list_find_cmd(haystack, needle)) {
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(needle);
- dprintk(NDEBUG_ABORT, "scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
- NCR5380_read(BUS_AND_STATUS_REG),
- NCR5380_read(STATUS_REG));
+ list_del(&ncmd->list);
+ return true;
+ }
+ return false;
+}
-#if 1
- /*
- * Case 1 : If the command is the currently executing command,
- * we'll set the aborted flag and return control so that
- * information transfer routine can exit cleanly.
- */
+/**
+ * NCR5380_abort - scsi host eh_abort_handler() method
+ * @cmd: the command to be aborted
+ *
+ * Try to abort a given command by removing it from queues and/or sending
+ * the target an abort message. This may not succeed in causing a target
+ * to abort the command. Nonetheless, the low-level driver must forget about
+ * the command because the mid-layer reclaims it and it may be re-issued.
+ *
+ * The normal path taken by a command is as follows. For EH we trace this
+ * same path to locate and abort the command.
+ *
+ * unissued -> selecting -> [unissued -> selecting ->]... connected ->
+ * [disconnected -> connected ->]...
+ * [autosense -> connected ->] done
+ *
+ * If cmd is unissued then just remove it.
+ * If cmd is disconnected, try to select the target.
+ * If cmd is connected, try to send an abort message.
+ * If cmd is waiting for autosense, give it a chance to complete but check
+ * that it isn't left connected.
+ * If cmd was not found at all then presumably it has already been completed,
+ * in which case return SUCCESS to try to avoid further EH measures.
+ * If the command has not completed yet, we must not fail to find it.
+ */
- if (hostdata->connected == cmd) {
+static int NCR5380_abort(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *instance = cmd->device->host;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ unsigned long flags;
+ int result = SUCCESS;
- dprintk(NDEBUG_ABORT, "scsi%d: aborting connected command\n", HOSTNO);
- /*
- * We should perform BSY checking, and make sure we haven't slipped
- * into BUS FREE.
- */
+ spin_lock_irqsave(&hostdata->lock, flags);
- /* NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_ATN); */
- /*
- * Since we can't change phases until we've completed the current
- * handshake, we have to source or sink a byte of data if the current
- * phase is not MSGOUT.
- */
+#if (NDEBUG & NDEBUG_ANY)
+ scmd_printk(KERN_INFO, cmd, __func__);
+#endif
+ NCR5380_dprint(NDEBUG_ANY, instance);
+ NCR5380_dprint_phase(NDEBUG_ANY, instance);
- /*
- * Return control to the executing NCR drive so we can clear the
- * aborted flag and get back into our main loop.
- */
+ if (list_del_cmd(&hostdata->unissued, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: removed %p from issue queue\n", cmd);
+ cmd->result = DID_ABORT << 16;
+ cmd->scsi_done(cmd); /* No tag or busy flag to worry about */
+ }
- if (do_abort(instance) == 0) {
- hostdata->aborted = 1;
- hostdata->connected = NULL;
- cmd->result = DID_ABORT << 16;
-#ifdef SUPPORT_TAGS
- cmd_free_tag(cmd);
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
-#endif
- maybe_release_dma_irq(instance);
- local_irq_restore(flags);
- cmd->scsi_done(cmd);
- return SUCCESS;
- } else {
- local_irq_restore(flags);
- printk("scsi%d: abort of connected command failed!\n", HOSTNO);
- return FAILED;
- }
+ if (hostdata->selecting == cmd) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: cmd %p == selecting\n", cmd);
+ hostdata->selecting = NULL;
+ cmd->result = DID_ABORT << 16;
+ complete_cmd(instance, cmd);
+ goto out;
}
-#endif
- /*
- * Case 2 : If the command hasn't been issued yet, we simply remove it
- * from the issue queue.
- */
- for (prev = (struct scsi_cmnd **)&(hostdata->issue_queue),
- tmp = (struct scsi_cmnd *)hostdata->issue_queue;
- tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
- if (cmd == tmp) {
- REMOVE(5, *prev, tmp, NEXT(tmp));
- (*prev) = NEXT(tmp);
- SET_NEXT(tmp, NULL);
- tmp->result = DID_ABORT << 16;
- maybe_release_dma_irq(instance);
- local_irq_restore(flags);
- dprintk(NDEBUG_ABORT, "scsi%d: abort removed command from issue queue.\n",
- HOSTNO);
- /* Tagged queuing note: no tag to free here, hasn't been assigned
- * yet... */
- tmp->scsi_done(tmp);
- return SUCCESS;
+ if (list_del_cmd(&hostdata->disconnected, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: removed %p from disconnected list\n", cmd);
+ cmd->result = DID_ERROR << 16;
+ if (!hostdata->connected)
+ NCR5380_select(instance, cmd);
+ if (hostdata->connected != cmd) {
+ complete_cmd(instance, cmd);
+ result = FAILED;
+ goto out;
}
}
- /*
- * Case 3 : If any commands are connected, we're going to fail the abort
- * and let the high level SCSI driver retry at a later time or
- * issue a reset.
- *
- * Timeouts, and therefore aborted commands, will be highly unlikely
- * and handling them cleanly in this situation would make the common
- * case of noresets less efficient, and would pollute our code. So,
- * we fail.
- */
+ if (hostdata->connected == cmd) {
+ dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd);
+ hostdata->connected = NULL;
+ if (do_abort(instance)) {
+ set_host_byte(cmd, DID_ERROR);
+ complete_cmd(instance, cmd);
+ result = FAILED;
+ goto out;
+ }
+ set_host_byte(cmd, DID_ABORT);
+#ifdef REAL_DMA
+ hostdata->dma_len = 0;
+#endif
+ if (cmd->cmnd[0] == REQUEST_SENSE)
+ complete_cmd(instance, cmd);
+ else {
+ struct NCR5380_cmd *ncmd = scsi_cmd_priv(cmd);
- if (hostdata->connected) {
- local_irq_restore(flags);
- dprintk(NDEBUG_ABORT, "scsi%d: abort failed, command connected.\n", HOSTNO);
- return FAILED;
+ /* Perform autosense for this command */
+ list_add(&ncmd->list, &hostdata->autosense);
+ }
}
- /*
- * Case 4: If the command is currently disconnected from the bus, and
- * there are no connected commands, we reconnect the I_T_L or
- * I_T_L_Q nexus associated with it, go into message out, and send
- * an abort message.
- *
- * This case is especially ugly. In order to reestablish the nexus, we
- * need to call NCR5380_select(). The easiest way to implement this
- * function was to abort if the bus was busy, and let the interrupt
- * handler triggered on the SEL for reselect take care of lost arbitrations
- * where necessary, meaning interrupts need to be enabled.
- *
- * When interrupts are enabled, the queues may change - so we
- * can't remove it from the disconnected queue before selecting it
- * because that could cause a failure in hashing the nexus if that
- * device reselected.
- *
- * Since the queues may change, we can't use the pointers from when we
- * first locate it.
- *
- * So, we must first locate the command, and if NCR5380_select()
- * succeeds, then issue the abort, relocate the command and remove
- * it from the disconnected queue.
- */
-
- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp;
- tmp = NEXT(tmp)) {
- if (cmd == tmp) {
- local_irq_restore(flags);
- dprintk(NDEBUG_ABORT, "scsi%d: aborting disconnected command.\n", HOSTNO);
-
- if (NCR5380_select(instance, cmd))
- return FAILED;
-
- dprintk(NDEBUG_ABORT, "scsi%d: nexus reestablished.\n", HOSTNO);
-
- do_abort(instance);
-
- local_irq_save(flags);
- for (prev = (struct scsi_cmnd **)&(hostdata->disconnected_queue),
- tmp = (struct scsi_cmnd *)hostdata->disconnected_queue;
- tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
- if (cmd == tmp) {
- REMOVE(5, *prev, tmp, NEXT(tmp));
- *prev = NEXT(tmp);
- SET_NEXT(tmp, NULL);
- tmp->result = DID_ABORT << 16;
- /* We must unlock the tag/LUN immediately here, since the
- * target goes to BUS FREE and doesn't send us another
- * message (COMMAND_COMPLETE or the like)
- */
-#ifdef SUPPORT_TAGS
- cmd_free_tag(tmp);
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
-#endif
- maybe_release_dma_irq(instance);
- local_irq_restore(flags);
- tmp->scsi_done(tmp);
- return SUCCESS;
- }
- }
+ if (list_find_cmd(&hostdata->autosense, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: found %p on sense queue\n", cmd);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
+ queue_work(hostdata->work_q, &hostdata->main_task);
+ msleep(1000);
+ spin_lock_irqsave(&hostdata->lock, flags);
+ if (list_del_cmd(&hostdata->autosense, cmd)) {
+ dsprintk(NDEBUG_ABORT, instance,
+ "abort: removed %p from sense queue\n", cmd);
+ set_host_byte(cmd, DID_ABORT);
+ complete_cmd(instance, cmd);
+ goto out;
}
}
- /* Maybe it is sufficient just to release the ST-DMA lock... (if
- * possible at all) At least, we should check if the lock could be
- * released after the abort, in case it is kept due to some bug.
- */
- maybe_release_dma_irq(instance);
- local_irq_restore(flags);
+ if (hostdata->connected == cmd) {
+ dsprintk(NDEBUG_ABORT, instance, "abort: cmd %p is connected\n", cmd);
+ hostdata->connected = NULL;
+ if (do_abort(instance)) {
+ set_host_byte(cmd, DID_ERROR);
+ complete_cmd(instance, cmd);
+ result = FAILED;
+ goto out;
+ }
+ set_host_byte(cmd, DID_ABORT);
+#ifdef REAL_DMA
+ hostdata->dma_len = 0;
+#endif
+ complete_cmd(instance, cmd);
+ }
- /*
- * Case 5 : If we reached this point, the command was not found in any of
- * the queues.
- *
- * We probably reached this point because of an unlikely race condition
- * between the command completing successfully and the abortion code,
- * so we won't panic, but we will notify the user in case something really
- * broke.
- */
+out:
+ if (result == FAILED)
+ dsprintk(NDEBUG_ABORT, instance, "abort: failed to abort %p\n", cmd);
+ else
+ dsprintk(NDEBUG_ABORT, instance, "abort: successfully aborted %p\n", cmd);
- printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);
+ queue_work(hostdata->work_q, &hostdata->main_task);
+ maybe_release_dma_irq(instance);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
- return FAILED;
+ return result;
}
-/*
- * Function : int NCR5380_reset (struct scsi_cmnd *cmd)
- *
- * Purpose : reset the SCSI bus.
- *
- * Returns : SUCCESS or FAILURE
+/**
+ * NCR5380_bus_reset - reset the SCSI bus
+ * @cmd: SCSI command undergoing EH
*
+ * Returns SUCCESS
*/
static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
@@ -2876,23 +2623,22 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int i;
unsigned long flags;
+ struct NCR5380_cmd *ncmd;
- NCR5380_print_status(instance);
+ spin_lock_irqsave(&hostdata->lock, flags);
+
+#if (NDEBUG & NDEBUG_ANY)
+ scmd_printk(KERN_INFO, cmd, __func__);
+#endif
+ NCR5380_dprint(NDEBUG_ANY, instance);
+ NCR5380_dprint_phase(NDEBUG_ANY, instance);
+
+ do_reset(instance);
- /* get in phase */
- NCR5380_write(TARGET_COMMAND_REG,
- PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG)));
- /* assert RST */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
- udelay(40);
/* reset NCR registers */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(TARGET_COMMAND_REG, 0);
NCR5380_write(SELECT_ENABLE_REG, 0);
- /* ++roman: reset interrupt condition! otherwise no interrupts don't get
- * through anymore ... */
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
/* After the reset, there are no more connected or disconnected commands
* and no busy units; so clear the low-level status here to avoid
@@ -2900,17 +2646,34 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
* commands!
*/
- if (hostdata->issue_queue)
- dprintk(NDEBUG_ABORT, "scsi%d: reset aborted issued command(s)\n", H_NO(cmd));
- if (hostdata->connected)
- dprintk(NDEBUG_ABORT, "scsi%d: reset aborted a connected command\n", H_NO(cmd));
- if (hostdata->disconnected_queue)
- dprintk(NDEBUG_ABORT, "scsi%d: reset aborted disconnected command(s)\n", H_NO(cmd));
+ hostdata->selecting = NULL;
+
+ list_for_each_entry(ncmd, &hostdata->disconnected, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ set_host_byte(cmd, DID_RESET);
+ cmd->scsi_done(cmd);
+ }
+
+ list_for_each_entry(ncmd, &hostdata->autosense, list) {
+ struct scsi_cmnd *cmd = NCR5380_to_scmd(ncmd);
+
+ set_host_byte(cmd, DID_RESET);
+ cmd->scsi_done(cmd);
+ }
+
+ if (hostdata->connected) {
+ set_host_byte(hostdata->connected, DID_RESET);
+ complete_cmd(instance, hostdata->connected);
+ hostdata->connected = NULL;
+ }
+
+ if (hostdata->sensing) {
+ set_host_byte(hostdata->connected, DID_RESET);
+ complete_cmd(instance, hostdata->sensing);
+ hostdata->sensing = NULL;
+ }
- local_irq_save(flags);
- hostdata->issue_queue = NULL;
- hostdata->connected = NULL;
- hostdata->disconnected_queue = NULL;
#ifdef SUPPORT_TAGS
free_all_tags(hostdata);
#endif
@@ -2920,8 +2683,9 @@ static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
hostdata->dma_len = 0;
#endif
+ queue_work(hostdata->work_q, &hostdata->main_task);
maybe_release_dma_irq(instance);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&hostdata->lock, flags);
return SUCCESS;
}
diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index 5ede3daa93dc..78d1b2963f2c 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -66,7 +66,6 @@
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/init.h>
@@ -98,7 +97,6 @@
#define NCR5380_queue_command atari_scsi_queue_command
#define NCR5380_abort atari_scsi_abort
-#define NCR5380_show_info atari_scsi_show_info
#define NCR5380_info atari_scsi_info
#define NCR5380_dma_read_setup(instance, data, count) \
@@ -161,23 +159,10 @@ static inline unsigned long SCSI_DMA_GETADR(void)
return adr;
}
-#define HOSTDATA_DMALEN (((struct NCR5380_hostdata *) \
- (atari_scsi_host->hostdata))->dma_len)
-
-/* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms,
- * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more
- * need ten times the standard value... */
-#ifndef CONFIG_ATARI_SCSI_TOSHIBA_DELAY
-#define AFTER_RESET_DELAY (HZ/2)
-#else
-#define AFTER_RESET_DELAY (5*HZ/2)
-#endif
-
#ifdef REAL_DMA
static void atari_scsi_fetch_restbytes(void);
#endif
-static struct Scsi_Host *atari_scsi_host;
static unsigned char (*atari_scsi_reg_read)(unsigned char reg);
static void (*atari_scsi_reg_write)(unsigned char reg, unsigned char value);
@@ -208,12 +193,12 @@ static int setup_cmd_per_lun = -1;
module_param(setup_cmd_per_lun, int, 0);
static int setup_sg_tablesize = -1;
module_param(setup_sg_tablesize, int, 0);
-#ifdef SUPPORT_TAGS
static int setup_use_tagged_queuing = -1;
module_param(setup_use_tagged_queuing, int, 0);
-#endif
static int setup_hostid = -1;
module_param(setup_hostid, int, 0);
+static int setup_toshiba_delay = -1;
+module_param(setup_toshiba_delay, int, 0);
#if defined(REAL_DMA)
@@ -273,15 +258,17 @@ static void scsi_dma_buserr(int irq, void *dummy)
#endif
-static irqreturn_t scsi_tt_intr(int irq, void *dummy)
+static irqreturn_t scsi_tt_intr(int irq, void *dev)
{
#ifdef REAL_DMA
+ struct Scsi_Host *instance = dev;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int dma_stat;
dma_stat = tt_scsi_dma.dma_ctrl;
- dprintk(NDEBUG_INTR, "scsi%d: NCR5380 interrupt, DMA status = %02x\n",
- atari_scsi_host->host_no, dma_stat & 0xff);
+ dsprintk(NDEBUG_INTR, instance, "NCR5380 interrupt, DMA status = %02x\n",
+ dma_stat & 0xff);
/* Look if it was the DMA that has interrupted: First possibility
* is that a bus error occurred...
@@ -304,7 +291,8 @@ static irqreturn_t scsi_tt_intr(int irq, void *dummy)
* data reg!
*/
if ((dma_stat & 0x02) && !(dma_stat & 0x40)) {
- atari_dma_residual = HOSTDATA_DMALEN - (SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr);
+ atari_dma_residual = hostdata->dma_len -
+ (SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr);
dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n",
atari_dma_residual);
@@ -356,15 +344,17 @@ static irqreturn_t scsi_tt_intr(int irq, void *dummy)
#endif /* REAL_DMA */
- NCR5380_intr(irq, dummy);
+ NCR5380_intr(irq, dev);
return IRQ_HANDLED;
}
-static irqreturn_t scsi_falcon_intr(int irq, void *dummy)
+static irqreturn_t scsi_falcon_intr(int irq, void *dev)
{
#ifdef REAL_DMA
+ struct Scsi_Host *instance = dev;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int dma_stat;
/* Turn off DMA and select sector counter register before
@@ -399,7 +389,7 @@ static irqreturn_t scsi_falcon_intr(int irq, void *dummy)
printk(KERN_ERR "SCSI DMA error: %ld bytes lost in "
"ST-DMA fifo\n", transferred & 15);
- atari_dma_residual = HOSTDATA_DMALEN - transferred;
+ atari_dma_residual = hostdata->dma_len - transferred;
dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n",
atari_dma_residual);
} else
@@ -411,13 +401,14 @@ static irqreturn_t scsi_falcon_intr(int irq, void *dummy)
* data to the original destination address.
*/
memcpy(atari_dma_orig_addr, phys_to_virt(atari_dma_startaddr),
- HOSTDATA_DMALEN - atari_dma_residual);
+ hostdata->dma_len - atari_dma_residual);
atari_dma_orig_addr = NULL;
}
#endif /* REAL_DMA */
- NCR5380_intr(irq, dummy);
+ NCR5380_intr(irq, dev);
+
return IRQ_HANDLED;
}
@@ -488,7 +479,7 @@ static int __init atari_scsi_setup(char *str)
* Defaults depend on TT or Falcon, determined at run time.
* Negative values mean don't change.
*/
- int ints[6];
+ int ints[8];
get_options(str, ARRAY_SIZE(ints), ints);
@@ -504,10 +495,11 @@ static int __init atari_scsi_setup(char *str)
setup_sg_tablesize = ints[3];
if (ints[0] >= 4)
setup_hostid = ints[4];
-#ifdef SUPPORT_TAGS
if (ints[0] >= 5)
setup_use_tagged_queuing = ints[5];
-#endif
+ /* ints[6] (use_pdma) is ignored */
+ if (ints[0] >= 7)
+ setup_toshiba_delay = ints[7];
return 1;
}
@@ -516,38 +508,6 @@ __setup("atascsi=", atari_scsi_setup);
#endif /* !MODULE */
-#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
-static void __init atari_scsi_reset_boot(void)
-{
- unsigned long end;
-
- /*
- * Do a SCSI reset to clean up the bus during initialization. No messing
- * with the queues, interrupts, or locks necessary here.
- */
-
- printk("Atari SCSI: resetting the SCSI bus...");
-
- /* get in phase */
- NCR5380_write(TARGET_COMMAND_REG,
- PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG)));
-
- /* assert RST */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
- /* The min. reset hold time is 25us, so 40us should be enough */
- udelay(50);
- /* reset RST and interrupt */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-
- end = jiffies + AFTER_RESET_DELAY;
- while (time_before(jiffies, end))
- barrier();
-
- printk(" done\n");
-}
-#endif
-
#if defined(REAL_DMA)
static unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance,
@@ -815,14 +775,14 @@ static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
static struct scsi_host_template atari_scsi_template = {
.module = THIS_MODULE,
.proc_name = DRV_MODULE_NAME,
- .show_info = atari_scsi_show_info,
.name = "Atari native SCSI",
.info = atari_scsi_info,
.queuecommand = atari_scsi_queue_command,
.eh_abort_handler = atari_scsi_abort,
.eh_bus_reset_handler = atari_scsi_bus_reset,
.this_id = 7,
- .use_clustering = DISABLE_CLUSTERING
+ .use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};
static int __init atari_scsi_probe(struct platform_device *pdev)
@@ -880,7 +840,7 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
} else {
/* Test if a host id is set in the NVRam */
if (ATARIHW_PRESENT(TT_CLK) && nvram_check_checksum()) {
- unsigned char b = nvram_read_byte(14);
+ unsigned char b = nvram_read_byte(16);
/* Arbitration enabled? (for TOS)
* If yes, use configured host ID
@@ -915,21 +875,18 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
error = -ENOMEM;
goto fail_alloc;
}
- atari_scsi_host = instance;
-
-#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
- atari_scsi_reset_boot();
-#endif
instance->irq = irq->start;
host_flags |= IS_A_TT() ? 0 : FLAG_LATE_DMA_SETUP;
-
#ifdef SUPPORT_TAGS
host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
#endif
+ host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0;
- NCR5380_init(instance, host_flags);
+ error = NCR5380_init(instance, host_flags);
+ if (error)
+ goto fail_init;
if (IS_A_TT()) {
error = request_irq(instance->irq, scsi_tt_intr, 0,
@@ -975,6 +932,8 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
#endif
}
+ NCR5380_maybe_reset_bus(instance);
+
error = scsi_add_host(instance, NULL);
if (error)
goto fail_host;
@@ -989,6 +948,7 @@ fail_host:
free_irq(instance->irq, instance);
fail_irq:
NCR5380_exit(instance);
+fail_init:
scsi_host_put(instance);
fail_alloc:
if (atari_dma_buffer)
diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
index 0e2bee937fe8..e22a268fd311 100644
--- a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
+++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
@@ -57,7 +57,7 @@ MODULE_PARM_DESC(cxgb3i_snd_win, "TCP send window in bytes (default=128KB)");
static int cxgb3i_rx_credit_thres = 10 * 1024;
module_param(cxgb3i_rx_credit_thres, int, 0644);
-MODULE_PARM_DESC(rx_credit_thres,
+MODULE_PARM_DESC(cxgb3i_rx_credit_thres,
"RX credits return threshold in bytes (default=10KB)");
static unsigned int cxgb3i_max_connect = 8 * 1024;
diff --git a/drivers/scsi/dmx3191d.c b/drivers/scsi/dmx3191d.c
index 3e088125a8be..6c14e68b9e1a 100644
--- a/drivers/scsi/dmx3191d.c
+++ b/drivers/scsi/dmx3191d.c
@@ -36,17 +36,10 @@
#define DONT_USE_INTR
-#define NCR5380_read(reg) inb(port + reg)
-#define NCR5380_write(reg, value) outb(value, port + reg)
+#define NCR5380_read(reg) inb(instance->io_port + reg)
+#define NCR5380_write(reg, value) outb(value, instance->io_port + reg)
#define NCR5380_implementation_fields /* none */
-#define NCR5380_local_declare() unsigned int port
-#define NCR5380_setup(instance) port = instance->io_port
-
-/*
- * Includes needed for NCR5380.[ch] (XXX: Move them to NCR5380.h)
- */
-#include <linux/delay.h>
#include "NCR5380.h"
#include "NCR5380.c"
@@ -56,6 +49,7 @@
static struct scsi_host_template dmx3191d_driver_template = {
+ .module = THIS_MODULE,
.proc_name = DMX3191D_DRIVER_NAME,
.name = "Domex DMX3191D",
.info = NCR5380_info,
@@ -67,6 +61,8 @@ static struct scsi_host_template dmx3191d_driver_template = {
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
static int dmx3191d_probe_one(struct pci_dev *pdev,
@@ -97,17 +93,25 @@ static int dmx3191d_probe_one(struct pci_dev *pdev,
*/
shost->irq = NO_IRQ;
- NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
+ error = NCR5380_init(shost, FLAG_NO_PSEUDO_DMA);
+ if (error)
+ goto out_host_put;
+
+ NCR5380_maybe_reset_bus(shost);
pci_set_drvdata(pdev, shost);
error = scsi_add_host(shost, &pdev->dev);
if (error)
- goto out_release_region;
+ goto out_exit;
scsi_scan_host(shost);
return 0;
+out_exit:
+ NCR5380_exit(shost);
+out_host_put:
+ scsi_host_put(shost);
out_release_region:
release_region(io, DMX3191D_REGION_LEN);
out_disable_device:
@@ -119,15 +123,14 @@ static int dmx3191d_probe_one(struct pci_dev *pdev,
static void dmx3191d_remove_one(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ unsigned long io = shost->io_port;
scsi_remove_host(shost);
NCR5380_exit(shost);
-
- release_region(shost->io_port, DMX3191D_REGION_LEN);
- pci_disable_device(pdev);
-
scsi_host_put(shost);
+ release_region(io, DMX3191D_REGION_LEN);
+ pci_disable_device(pdev);
}
static struct pci_device_id dmx3191d_pci_tbl[] = {
diff --git a/drivers/scsi/dtc.c b/drivers/scsi/dtc.c
index 4c74c7ba2dff..6c736b071cf4 100644
--- a/drivers/scsi/dtc.c
+++ b/drivers/scsi/dtc.c
@@ -1,9 +1,5 @@
-
#define PSEUDO_DMA
#define DONT_USE_INTR
-#define UNSAFE /* Leave interrupts enabled during pseudo-dma I/O */
-#define DMA_WORKS_RIGHT
-
/*
* DTC 3180/3280 driver, by
@@ -50,15 +46,13 @@
#include <linux/module.h>
-#include <linux/signal.h>
#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/stat.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <scsi/scsi_host.h>
+
#include "dtc.h"
#define AUTOPROBE_IRQ
#include "NCR5380.h"
@@ -150,7 +144,7 @@ static const struct signature {
static int __init dtc_setup(char *str)
{
- static int commandline_current = 0;
+ static int commandline_current;
int i;
int ints[10];
@@ -188,7 +182,7 @@ __setup("dtc=", dtc_setup);
static int __init dtc_detect(struct scsi_host_template * tpnt)
{
- static int current_override = 0, current_base = 0;
+ static int current_override, current_base;
struct Scsi_Host *instance;
unsigned int addr;
void __iomem *base;
@@ -205,9 +199,8 @@ static int __init dtc_detect(struct scsi_host_template * tpnt)
addr = 0;
} else
for (; !addr && (current_base < NO_BASES); ++current_base) {
-#if (DTCDEBUG & DTCDEBUG_INIT)
- printk(KERN_DEBUG "scsi-dtc : probing address %08x\n", bases[current_base].address);
-#endif
+ dprintk(NDEBUG_INIT, "dtc: probing address 0x%08x\n",
+ (unsigned int)bases[current_base].address);
if (bases[current_base].noauto)
continue;
base = ioremap(bases[current_base].address, 0x2000);
@@ -216,18 +209,14 @@ static int __init dtc_detect(struct scsi_host_template * tpnt)
for (sig = 0; sig < NO_SIGNATURES; ++sig) {
if (check_signature(base + signatures[sig].offset, signatures[sig].string, strlen(signatures[sig].string))) {
addr = bases[current_base].address;
-#if (DTCDEBUG & DTCDEBUG_INIT)
- printk(KERN_DEBUG "scsi-dtc : detected board.\n");
-#endif
+ dprintk(NDEBUG_INIT, "dtc: detected board\n");
goto found;
}
}
iounmap(base);
}
-#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT)
- printk(KERN_DEBUG "scsi-dtc : base = %08x\n", addr);
-#endif
+ dprintk(NDEBUG_INIT, "dtc: addr = 0x%08x\n", addr);
if (!addr)
break;
@@ -235,12 +224,15 @@ static int __init dtc_detect(struct scsi_host_template * tpnt)
found:
instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
if (instance == NULL)
- break;
+ goto out_unmap;
instance->base = addr;
((struct NCR5380_hostdata *)(instance)->hostdata)->base = base;
- NCR5380_init(instance, 0);
+ if (NCR5380_init(instance, FLAG_NO_DMA_FIXUP))
+ goto out_unregister;
+
+ NCR5380_maybe_reset_bus(instance);
NCR5380_write(DTC_CONTROL_REG, CSR_5380_INTR); /* Enable int's */
if (overrides[current_override].irq != IRQ_AUTO)
@@ -271,14 +263,19 @@ found:
printk(KERN_WARNING "scsi%d : interrupts not used. Might as well not jumper it.\n", instance->host_no);
instance->irq = NO_IRQ;
#endif
-#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT)
- printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
-#endif
+ dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n",
+ instance->host_no, instance->irq);
++current_override;
++count;
}
return count;
+
+out_unregister:
+ scsi_unregister(instance);
+out_unmap:
+ iounmap(base);
+ return count;
}
/*
@@ -331,12 +328,8 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
unsigned char *d = dst;
int i; /* For counting time spent in the poll-loop */
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- NCR5380_local_declare();
- NCR5380_setup(instance);
i = 0;
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
if (instance->irq == NO_IRQ)
NCR5380_write(DTC_CONTROL_REG, CSR_DIR_READ);
else
@@ -348,7 +341,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
while (NCR5380_read(DTC_CONTROL_REG) & CSR_HOST_BUF_NOT_RDY)
++i;
rtrc(3);
- memcpy_fromio(d, base + DTC_DATA_BUF, 128);
+ memcpy_fromio(d, hostdata->base + DTC_DATA_BUF, 128);
d += 128;
len -= 128;
rtrc(7);
@@ -358,9 +351,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
rtrc(4);
while (!(NCR5380_read(DTC_CONTROL_REG) & D_CR_ACCESS))
++i;
- NCR5380_write(MODE_REG, 0); /* Clear the operating mode */
rtrc(0);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
if (i > hostdata->spin_max_r)
hostdata->spin_max_r = i;
return (0);
@@ -383,12 +374,7 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
{
int i;
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- NCR5380_local_declare();
- NCR5380_setup(instance);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
- /* set direction (write) */
if (instance->irq == NO_IRQ)
NCR5380_write(DTC_CONTROL_REG, 0);
else
@@ -400,7 +386,7 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
while (NCR5380_read(DTC_CONTROL_REG) & CSR_HOST_BUF_NOT_RDY)
++i;
rtrc(3);
- memcpy_toio(base + DTC_DATA_BUF, src, 128);
+ memcpy_toio(hostdata->base + DTC_DATA_BUF, src, 128);
src += 128;
len -= 128;
}
@@ -413,47 +399,60 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
++i;
rtrc(7);
/* Check for parity error here. fixme. */
- NCR5380_write(MODE_REG, 0); /* Clear the operating mode */
rtrc(0);
if (i > hostdata->spin_max_w)
hostdata->spin_max_w = i;
return (0);
}
+static int dtc_dma_xfer_len(struct scsi_cmnd *cmd)
+{
+ int transfersize = cmd->transfersize;
+
+ /* Limit transfers to 32K, for xx400 & xx406
+ * pseudoDMA that transfers in 128 bytes blocks.
+ */
+ if (transfersize > 32 * 1024 && cmd->SCp.this_residual &&
+ !(cmd->SCp.this_residual % transfersize))
+ transfersize = 32 * 1024;
+
+ return transfersize;
+}
+
MODULE_LICENSE("GPL");
#include "NCR5380.c"
static int dtc_release(struct Scsi_Host *shost)
{
- NCR5380_local_declare();
- NCR5380_setup(shost);
+ struct NCR5380_hostdata *hostdata = shost_priv(shost);
+
if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
- if (shost->io_port && shost->n_io_port)
- release_region(shost->io_port, shost->n_io_port);
scsi_unregister(shost);
- iounmap(base);
+ iounmap(hostdata->base);
return 0;
}
static struct scsi_host_template driver_template = {
- .name = "DTC 3180/3280 ",
- .detect = dtc_detect,
- .release = dtc_release,
- .proc_name = "dtc3x80",
- .show_info = dtc_show_info,
- .write_info = dtc_write_info,
- .info = dtc_info,
- .queuecommand = dtc_queue_command,
- .eh_abort_handler = dtc_abort,
- .eh_bus_reset_handler = dtc_bus_reset,
- .bios_param = dtc_biosparam,
- .can_queue = CAN_QUEUE,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = CMD_PER_LUN,
- .use_clustering = DISABLE_CLUSTERING,
+ .name = "DTC 3180/3280",
+ .detect = dtc_detect,
+ .release = dtc_release,
+ .proc_name = "dtc3x80",
+ .show_info = dtc_show_info,
+ .write_info = dtc_write_info,
+ .info = dtc_info,
+ .queuecommand = dtc_queue_command,
+ .eh_abort_handler = dtc_abort,
+ .eh_bus_reset_handler = dtc_bus_reset,
+ .bios_param = dtc_biosparam,
+ .can_queue = 32,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 2,
+ .use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
#include "scsi_module.c"
diff --git a/drivers/scsi/dtc.h b/drivers/scsi/dtc.h
index 78a2332e9064..56732cba8aba 100644
--- a/drivers/scsi/dtc.h
+++ b/drivers/scsi/dtc.h
@@ -10,54 +10,17 @@
#ifndef DTC3280_H
#define DTC3280_H
-#define DTCDEBUG 0
-#define DTCDEBUG_INIT 0x1
-#define DTCDEBUG_TRANSFER 0x2
-
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 32
-#endif
-
#define NCR5380_implementation_fields \
void __iomem *base
-#define NCR5380_local_declare() \
- void __iomem *base
-
-#define NCR5380_setup(instance) \
- base = ((struct NCR5380_hostdata *)(instance)->hostdata)->base
+#define DTC_address(reg) \
+ (((struct NCR5380_hostdata *)shost_priv(instance))->base + DTC_5380_OFFSET + reg)
-#define DTC_address(reg) (base + DTC_5380_OFFSET + reg)
-
-#define dbNCR5380_read(reg) \
- (rval=readb(DTC_address(reg)), \
- (((unsigned char) printk("DTC : read register %d at addr %p is: %02x\n"\
- , (reg), DTC_address(reg), rval)), rval ) )
-
-#define dbNCR5380_write(reg, value) do { \
- printk("DTC : write %02x to register %d at address %p\n", \
- (value), (reg), DTC_address(reg)); \
- writeb(value, DTC_address(reg));} while(0)
-
-
-#if !(DTCDEBUG & DTCDEBUG_TRANSFER)
#define NCR5380_read(reg) (readb(DTC_address(reg)))
#define NCR5380_write(reg, value) (writeb(value, DTC_address(reg)))
-#else
-#define NCR5380_read(reg) (readb(DTC_address(reg)))
-#define xNCR5380_read(reg) \
- (((unsigned char) printk("DTC : read register %d at address %p\n"\
- , (reg), DTC_address(reg))), readb(DTC_address(reg)))
-#define NCR5380_write(reg, value) do { \
- printk("DTC : write %02x to register %d at address %p\n", \
- (value), (reg), DTC_address(reg)); \
- writeb(value, DTC_address(reg));} while(0)
-#endif
+#define NCR5380_dma_xfer_len(instance, cmd, phase) \
+ dtc_dma_xfer_len(cmd)
#define NCR5380_intr dtc_intr
#define NCR5380_queue_command dtc_queue_command
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index f8d2478b11cc..90091e693020 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -56,40 +56,31 @@
*
*/
-/* settings for DTC3181E card with only Mustek scanner attached */
-#define USLEEP_POLL msecs_to_jiffies(10)
-#define USLEEP_SLEEP msecs_to_jiffies(200)
-#define USLEEP_WAITLONG msecs_to_jiffies(5000)
-
#define AUTOPROBE_IRQ
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
-#define NCR53C400_PSEUDO_DMA 1
#define PSEUDO_DMA
-#define NCR53C400
#endif
#include <asm/io.h>
-#include <linux/signal.h>
#include <linux/blkdev.h>
+#include <linux/module.h>
#include <scsi/scsi_host.h>
#include "g_NCR5380.h"
#include "NCR5380.h"
-#include <linux/stat.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/isapnp.h>
-#include <linux/delay.h>
#include <linux/interrupt.h>
-#define NCR_NOT_SET 0
-static int ncr_irq = NCR_NOT_SET;
-static int ncr_dma = NCR_NOT_SET;
-static int ncr_addr = NCR_NOT_SET;
-static int ncr_5380 = NCR_NOT_SET;
-static int ncr_53c400 = NCR_NOT_SET;
-static int ncr_53c400a = NCR_NOT_SET;
-static int dtc_3181e = NCR_NOT_SET;
+static int ncr_irq;
+static int ncr_dma;
+static int ncr_addr;
+static int ncr_5380;
+static int ncr_53c400;
+static int ncr_53c400a;
+static int dtc_3181e;
+static int hp_c2502;
static struct override {
NCR5380_map_type NCR5380_map_name;
@@ -121,7 +112,7 @@ static struct override {
static void __init internal_setup(int board, char *str, int *ints)
{
- static int commandline_current = 0;
+ static int commandline_current;
switch (board) {
case BOARD_NCR5380:
if (ints[0] != 2 && ints[0] != 3) {
@@ -235,6 +226,30 @@ static int __init do_DTC3181E_setup(char *str)
#endif
+#ifndef SCSI_G_NCR5380_MEM
+/*
+ * Configure I/O address of 53C400A or DTC436 by writing magic numbers
+ * to ports 0x779 and 0x379.
+ */
+static void magic_configure(int idx, u8 irq, u8 magic[])
+{
+ u8 cfg = 0;
+
+ outb(magic[0], 0x779);
+ outb(magic[1], 0x379);
+ outb(magic[2], 0x379);
+ outb(magic[3], 0x379);
+ outb(magic[4], 0x379);
+
+ /* allowed IRQs for HP C2502 */
+ if (irq != 2 && irq != 3 && irq != 4 && irq != 5 && irq != 7)
+ irq = 0;
+ if (idx >= 0 && idx <= 7)
+ cfg = 0x80 | idx | (irq << 4);
+ outb(cfg, 0x379);
+}
+#endif
+
/**
* generic_NCR5380_detect - look for NCR5380 controllers
* @tpnt: the scsi template
@@ -243,19 +258,18 @@ static int __init do_DTC3181E_setup(char *str)
* and DTC436(ISAPnP) controllers. If overrides have been set we use
* them.
*
- * The caller supplied NCR5380_init function is invoked from here, before
- * the interrupt line is taken.
- *
* Locks: none
*/
static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
{
- static int current_override = 0;
+ static int current_override;
int count;
unsigned int *ports;
+ u8 *magic = NULL;
#ifndef SCSI_G_NCR5380_MEM
int i;
+ int port_idx = -1;
unsigned long region_size = 16;
#endif
static unsigned int __initdata ncr_53c400a_ports[] = {
@@ -264,27 +278,36 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
static unsigned int __initdata dtc_3181e_ports[] = {
0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0
};
- int flags = 0;
+ static u8 ncr_53c400a_magic[] __initdata = { /* 53C400A & DTC436 */
+ 0x59, 0xb9, 0xc5, 0xae, 0xa6
+ };
+ static u8 hp_c2502_magic[] __initdata = { /* HP C2502 */
+ 0x0f, 0x22, 0xf0, 0x20, 0x80
+ };
+ int flags;
struct Scsi_Host *instance;
+ struct NCR5380_hostdata *hostdata;
#ifdef SCSI_G_NCR5380_MEM
unsigned long base;
void __iomem *iomem;
#endif
- if (ncr_irq != NCR_NOT_SET)
+ if (ncr_irq)
overrides[0].irq = ncr_irq;
- if (ncr_dma != NCR_NOT_SET)
+ if (ncr_dma)
overrides[0].dma = ncr_dma;
- if (ncr_addr != NCR_NOT_SET)
+ if (ncr_addr)
overrides[0].NCR5380_map_name = (NCR5380_map_type) ncr_addr;
- if (ncr_5380 != NCR_NOT_SET)
+ if (ncr_5380)
overrides[0].board = BOARD_NCR5380;
- else if (ncr_53c400 != NCR_NOT_SET)
+ else if (ncr_53c400)
overrides[0].board = BOARD_NCR53C400;
- else if (ncr_53c400a != NCR_NOT_SET)
+ else if (ncr_53c400a)
overrides[0].board = BOARD_NCR53C400A;
- else if (dtc_3181e != NCR_NOT_SET)
+ else if (dtc_3181e)
overrides[0].board = BOARD_DTC3181E;
+ else if (hp_c2502)
+ overrides[0].board = BOARD_HP_C2502;
#ifndef SCSI_G_NCR5380_MEM
if (!current_override && isapnp_present()) {
struct pnp_dev *dev = NULL;
@@ -318,41 +341,45 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
}
}
#endif
- tpnt->proc_name = "g_NCR5380";
for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
if (!(overrides[current_override].NCR5380_map_name))
continue;
ports = NULL;
+ flags = 0;
switch (overrides[current_override].board) {
case BOARD_NCR5380:
flags = FLAG_NO_PSEUDO_DMA;
break;
case BOARD_NCR53C400:
- flags = FLAG_NCR53C400;
+#ifdef PSEUDO_DMA
+ flags = FLAG_NO_DMA_FIXUP;
+#endif
break;
case BOARD_NCR53C400A:
- flags = FLAG_NO_PSEUDO_DMA;
+ flags = FLAG_NO_DMA_FIXUP;
+ ports = ncr_53c400a_ports;
+ magic = ncr_53c400a_magic;
+ break;
+ case BOARD_HP_C2502:
+ flags = FLAG_NO_DMA_FIXUP;
ports = ncr_53c400a_ports;
+ magic = hp_c2502_magic;
break;
case BOARD_DTC3181E:
- flags = FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E;
+ flags = FLAG_NO_DMA_FIXUP;
ports = dtc_3181e_ports;
+ magic = ncr_53c400a_magic;
break;
}
#ifndef SCSI_G_NCR5380_MEM
- if (ports) {
+ if (ports && magic) {
/* wakeup sequence for the NCR53C400A and DTC3181E */
/* Disable the adapter and look for a free io port */
- outb(0x59, 0x779);
- outb(0xb9, 0x379);
- outb(0xc5, 0x379);
- outb(0xae, 0x379);
- outb(0xa6, 0x379);
- outb(0x00, 0x379);
+ magic_configure(-1, 0, magic);
if (overrides[current_override].NCR5380_map_name != PORT_AUTO)
for (i = 0; ports[i]; i++) {
@@ -371,17 +398,12 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
}
if (ports[i]) {
/* At this point we have our region reserved */
- outb(0x59, 0x779);
- outb(0xb9, 0x379);
- outb(0xc5, 0x379);
- outb(0xae, 0x379);
- outb(0xa6, 0x379);
- outb(0x80 | i, 0x379); /* set io port to be used */
+ magic_configure(i, 0, magic); /* no IRQ yet */
outb(0xc0, ports[i] + 9);
if (inb(ports[i] + 9) != 0x80)
continue;
- else
- overrides[current_override].NCR5380_map_name = ports[i];
+ overrides[current_override].NCR5380_map_name = ports[i];
+ port_idx = i;
} else
continue;
}
@@ -403,24 +425,65 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
}
#endif
instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
- if (instance == NULL) {
-#ifndef SCSI_G_NCR5380_MEM
- release_region(overrides[current_override].NCR5380_map_name, region_size);
-#else
- iounmap(iomem);
- release_mem_region(base, NCR5380_region_size);
-#endif
- continue;
- }
+ if (instance == NULL)
+ goto out_release;
+ hostdata = shost_priv(instance);
- instance->NCR5380_instance_name = overrides[current_override].NCR5380_map_name;
#ifndef SCSI_G_NCR5380_MEM
+ instance->io_port = overrides[current_override].NCR5380_map_name;
instance->n_io_port = region_size;
+ hostdata->io_width = 1; /* 8-bit PDMA by default */
+
+ /*
+ * On NCR53C400 boards, NCR5380 registers are mapped 8 past
+ * the base address.
+ */
+ switch (overrides[current_override].board) {
+ case BOARD_NCR53C400:
+ instance->io_port += 8;
+ hostdata->c400_ctl_status = 0;
+ hostdata->c400_blk_cnt = 1;
+ hostdata->c400_host_buf = 4;
+ break;
+ case BOARD_DTC3181E:
+ hostdata->io_width = 2; /* 16-bit PDMA */
+ /* fall through */
+ case BOARD_NCR53C400A:
+ case BOARD_HP_C2502:
+ hostdata->c400_ctl_status = 9;
+ hostdata->c400_blk_cnt = 10;
+ hostdata->c400_host_buf = 8;
+ break;
+ }
#else
- ((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem;
+ instance->base = overrides[current_override].NCR5380_map_name;
+ hostdata->iomem = iomem;
+ switch (overrides[current_override].board) {
+ case BOARD_NCR53C400:
+ hostdata->c400_ctl_status = 0x100;
+ hostdata->c400_blk_cnt = 0x101;
+ hostdata->c400_host_buf = 0x104;
+ break;
+ case BOARD_DTC3181E:
+ case BOARD_NCR53C400A:
+ case BOARD_HP_C2502:
+ pr_err(DRV_MODULE_NAME ": unknown register offsets\n");
+ goto out_unregister;
+ }
#endif
- NCR5380_init(instance, flags);
+ if (NCR5380_init(instance, flags))
+ goto out_unregister;
+
+ switch (overrides[current_override].board) {
+ case BOARD_NCR53C400:
+ case BOARD_DTC3181E:
+ case BOARD_NCR53C400A:
+ case BOARD_HP_C2502:
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
+ }
+
+ NCR5380_maybe_reset_bus(instance);
if (overrides[current_override].irq != IRQ_AUTO)
instance->irq = overrides[current_override].irq;
@@ -431,12 +494,18 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
if (instance->irq == 255)
instance->irq = NO_IRQ;
- if (instance->irq != NO_IRQ)
+ if (instance->irq != NO_IRQ) {
+#ifndef SCSI_G_NCR5380_MEM
+ /* set IRQ for HP C2502 */
+ if (overrides[current_override].board == BOARD_HP_C2502)
+ magic_configure(port_idx, instance->irq, magic);
+#endif
if (request_irq(instance->irq, generic_NCR5380_intr,
0, "NCR5380", instance)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
instance->irq = NO_IRQ;
}
+ }
if (instance->irq == NO_IRQ) {
printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
@@ -447,6 +516,17 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
++count;
}
return count;
+
+out_unregister:
+ scsi_unregister(instance);
+out_release:
+#ifndef SCSI_G_NCR5380_MEM
+ release_region(overrides[current_override].NCR5380_map_name, region_size);
+#else
+ iounmap(iomem);
+ release_mem_region(base, NCR5380_region_size);
+#endif
+ return count;
}
/**
@@ -460,21 +540,15 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
static int generic_NCR5380_release_resources(struct Scsi_Host *instance)
{
- NCR5380_local_declare();
- NCR5380_setup(instance);
-
if (instance->irq != NO_IRQ)
free_irq(instance->irq, instance);
NCR5380_exit(instance);
-
#ifndef SCSI_G_NCR5380_MEM
- release_region(instance->NCR5380_instance_name, instance->n_io_port);
+ release_region(instance->io_port, instance->n_io_port);
#else
iounmap(((struct NCR5380_hostdata *)instance->hostdata)->iomem);
- release_mem_region(instance->NCR5380_instance_name, NCR5380_region_size);
+ release_mem_region(instance->base, NCR5380_region_size);
#endif
-
-
return 0;
}
@@ -507,7 +581,7 @@ generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
}
#endif
-#ifdef NCR53C400_PSEUDO_DMA
+#ifdef PSEUDO_DMA
/**
* NCR5380_pread - pseudo DMA read
@@ -521,75 +595,68 @@ generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int blocks = len / 128;
int start = 0;
- int bl;
-
- NCR5380_local_declare();
- NCR5380_setup(instance);
- NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR);
- NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR);
+ NCR5380_write(hostdata->c400_blk_cnt, blocks);
while (1) {
- if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
+ if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
break;
- }
- if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
+ if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
return -1;
}
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY);
+ while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
+ ; /* FIXME - no timeout */
#ifndef SCSI_G_NCR5380_MEM
- {
- int i;
- for (i = 0; i < 128; i++)
- dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
- }
+ if (hostdata->io_width == 2)
+ insw(instance->io_port + hostdata->c400_host_buf,
+ dst + start, 64);
+ else
+ insb(instance->io_port + hostdata->c400_host_buf,
+ dst + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
- memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128);
+ memcpy_fromio(dst + start,
+ hostdata->iomem + NCR53C400_host_buffer, 128);
#endif
start += 128;
blocks--;
}
if (blocks) {
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
- {
- // FIXME - no timeout
- }
+ while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
+ ; /* FIXME - no timeout */
#ifndef SCSI_G_NCR5380_MEM
- {
- int i;
- for (i = 0; i < 128; i++)
- dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
- }
+ if (hostdata->io_width == 2)
+ insw(instance->io_port + hostdata->c400_host_buf,
+ dst + start, 64);
+ else
+ insb(instance->io_port + hostdata->c400_host_buf,
+ dst + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
- memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128);
+ memcpy_fromio(dst + start,
+ hostdata->iomem + NCR53C400_host_buffer, 128);
#endif
start += 128;
blocks--;
}
- if (!(NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
+ if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
printk("53C400r: no 53C80 gated irq after transfer");
-#if 0
- /*
- * DON'T DO THIS - THEY NEVER ARRIVE!
- */
- printk("53C400r: Waiting for 53C80 registers\n");
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG)
+ /* wait for 53C80 registers to be available */
+ while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG))
;
-#endif
+
if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
printk(KERN_ERR "53C400r: no end dma signal\n");
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
return 0;
}
@@ -605,89 +672,91 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int blocks = len / 128;
int start = 0;
- int bl;
- int i;
- NCR5380_local_declare();
- NCR5380_setup(instance);
-
- NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
- NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
+ NCR5380_write(hostdata->c400_blk_cnt, blocks);
while (1) {
- if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
+ if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
return -1;
}
- if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
+ if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
break;
- }
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+ while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
; // FIXME - timeout
#ifndef SCSI_G_NCR5380_MEM
- {
- for (i = 0; i < 128; i++)
- NCR5380_write(C400_HOST_BUFFER, src[start + i]);
- }
+ if (hostdata->io_width == 2)
+ outsw(instance->io_port + hostdata->c400_host_buf,
+ src + start, 64);
+ else
+ outsb(instance->io_port + hostdata->c400_host_buf,
+ src + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
- memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128);
+ memcpy_toio(hostdata->iomem + NCR53C400_host_buffer,
+ src + start, 128);
#endif
start += 128;
blocks--;
}
if (blocks) {
- while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+ while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
; // FIXME - no timeout
#ifndef SCSI_G_NCR5380_MEM
- {
- for (i = 0; i < 128; i++)
- NCR5380_write(C400_HOST_BUFFER, src[start + i]);
- }
+ if (hostdata->io_width == 2)
+ outsw(instance->io_port + hostdata->c400_host_buf,
+ src + start, 64);
+ else
+ outsb(instance->io_port + hostdata->c400_host_buf,
+ src + start, 128);
#else
/* implies SCSI_G_NCR5380_MEM */
- memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128);
+ memcpy_toio(hostdata->iomem + NCR53C400_host_buffer,
+ src + start, 128);
#endif
start += 128;
blocks--;
}
-#if 0
- printk("53C400w: waiting for registers to be available\n");
- THEY NEVER DO ! while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG);
- printk("53C400w: Got em\n");
-#endif
-
- /* Let's wait for this instead - could be ugly */
- /* All documentation says to check for this. Maybe my hardware is too
- * fast. Waiting for it seems to work fine! KLL
- */
- while (!(i = NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
- ; // FIXME - no timeout
-
- /*
- * I know. i is certainly != 0 here but the loop is new. See previous
- * comment.
- */
- if (i) {
- if (!((i = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_END_DMA_TRANSFER))
- printk(KERN_ERR "53C400w: No END OF DMA bit - WHOOPS! BASR=%0x\n", i);
- } else
- printk(KERN_ERR "53C400w: no 53C80 gated irq after transfer (last block)\n");
+ /* wait for 53C80 registers to be available */
+ while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)) {
+ udelay(4); /* DTC436 chip hangs without this */
+ /* FIXME - no timeout */
+ }
-#if 0
if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) {
printk(KERN_ERR "53C400w: no end dma signal\n");
}
-#endif
+
while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT))
; // TIMEOUT
return 0;
}
-#endif /* PSEUDO_DMA */
+
+static int generic_NCR5380_dma_xfer_len(struct scsi_cmnd *cmd)
+{
+ int transfersize = cmd->transfersize;
+
+ /* Limit transfers to 32K, for xx400 & xx406
+ * pseudoDMA that transfers in 128 bytes blocks.
+ */
+ if (transfersize > 32 * 1024 && cmd->SCp.this_residual &&
+ !(cmd->SCp.this_residual % transfersize))
+ transfersize = 32 * 1024;
+
+ /* 53C400 datasheet: non-modulo-128-byte transfers should use PIO */
+ if (transfersize % 128)
+ transfersize = 0;
+
+ return transfersize;
+}
+
+#endif /* PSEUDO_DMA */
/*
* Include the NCR5380 core code that we build our driver around
@@ -696,22 +765,24 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
#include "NCR5380.c"
static struct scsi_host_template driver_template = {
- .show_info = generic_NCR5380_show_info,
- .name = "Generic NCR5380/NCR53C400 SCSI",
- .detect = generic_NCR5380_detect,
- .release = generic_NCR5380_release_resources,
- .info = generic_NCR5380_info,
- .queuecommand = generic_NCR5380_queue_command,
+ .proc_name = DRV_MODULE_NAME,
+ .name = "Generic NCR5380/NCR53C400 SCSI",
+ .detect = generic_NCR5380_detect,
+ .release = generic_NCR5380_release_resources,
+ .info = generic_NCR5380_info,
+ .queuecommand = generic_NCR5380_queue_command,
.eh_abort_handler = generic_NCR5380_abort,
.eh_bus_reset_handler = generic_NCR5380_bus_reset,
- .bios_param = NCR5380_BIOSPARAM,
- .can_queue = CAN_QUEUE,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = CMD_PER_LUN,
- .use_clustering = DISABLE_CLUSTERING,
+ .bios_param = NCR5380_BIOSPARAM,
+ .can_queue = 16,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 2,
+ .use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
-#include <linux/module.h>
+
#include "scsi_module.c"
module_param(ncr_irq, int, 0);
@@ -721,6 +792,7 @@ module_param(ncr_5380, int, 0);
module_param(ncr_53c400, int, 0);
module_param(ncr_53c400a, int, 0);
module_param(dtc_3181e, int, 0);
+module_param(hp_c2502, int, 0);
MODULE_LICENSE("GPL");
#if !defined(SCSI_G_NCR5380_MEM) && defined(MODULE)
diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h
index bea1a3b9b862..6f3d2ac4f185 100644
--- a/drivers/scsi/g_NCR5380.h
+++ b/drivers/scsi/g_NCR5380.h
@@ -14,81 +14,67 @@
#ifndef GENERIC_NCR5380_H
#define GENERIC_NCR5380_H
-#ifdef NCR53C400
+#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define BIOSPARAM
#define NCR5380_BIOSPARAM generic_NCR5380_biosparam
#else
#define NCR5380_BIOSPARAM NULL
#endif
-#ifndef ASM
-
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 16
-#endif
-
#define __STRVAL(x) #x
#define STRVAL(x) __STRVAL(x)
#ifndef SCSI_G_NCR5380_MEM
+#define DRV_MODULE_NAME "g_NCR5380"
-#define NCR5380_map_config port
#define NCR5380_map_type int
#define NCR5380_map_name port
-#define NCR5380_instance_name io_port
-#define NCR53C400_register_offset 0
-#define NCR53C400_address_adjust 8
-#ifdef NCR53C400
+#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define NCR5380_region_size 16
#else
#define NCR5380_region_size 8
#endif
-#define NCR5380_read(reg) (inb(NCR5380_map_name + (reg)))
-#define NCR5380_write(reg, value) (outb((value), (NCR5380_map_name + (reg))))
+#define NCR5380_read(reg) \
+ inb(instance->io_port + (reg))
+#define NCR5380_write(reg, value) \
+ outb(value, instance->io_port + (reg))
#define NCR5380_implementation_fields \
- NCR5380_map_type NCR5380_map_name
-
-#define NCR5380_local_declare() \
- register NCR5380_implementation_fields
-
-#define NCR5380_setup(instance) \
- NCR5380_map_name = (NCR5380_map_type)((instance)->NCR5380_instance_name)
+ int c400_ctl_status; \
+ int c400_blk_cnt; \
+ int c400_host_buf; \
+ int io_width;
#else
/* therefore SCSI_G_NCR5380_MEM */
+#define DRV_MODULE_NAME "g_NCR5380_mmio"
-#define NCR5380_map_config memory
#define NCR5380_map_type unsigned long
#define NCR5380_map_name base
-#define NCR5380_instance_name base
-#define NCR53C400_register_offset 0x108
-#define NCR53C400_address_adjust 0
#define NCR53C400_mem_base 0x3880
#define NCR53C400_host_buffer 0x3900
#define NCR5380_region_size 0x3a00
-#define NCR5380_read(reg) readb(iomem + NCR53C400_mem_base + (reg))
-#define NCR5380_write(reg, value) writeb(value, iomem + NCR53C400_mem_base + (reg))
+#define NCR5380_read(reg) \
+ readb(((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \
+ NCR53C400_mem_base + (reg))
+#define NCR5380_write(reg, value) \
+ writeb(value, ((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \
+ NCR53C400_mem_base + (reg))
#define NCR5380_implementation_fields \
- NCR5380_map_type NCR5380_map_name; \
- void __iomem *iomem;
-
-#define NCR5380_local_declare() \
- register void __iomem *iomem
-
-#define NCR5380_setup(instance) \
- iomem = (((struct NCR5380_hostdata *)(instance)->hostdata)->iomem)
+ void __iomem *iomem; \
+ int c400_ctl_status; \
+ int c400_blk_cnt; \
+ int c400_host_buf;
#endif
+#define NCR5380_dma_xfer_len(instance, cmd, phase) \
+ generic_NCR5380_dma_xfer_len(cmd)
+
#define NCR5380_intr generic_NCR5380_intr
#define NCR5380_queue_command generic_NCR5380_queue_command
#define NCR5380_abort generic_NCR5380_abort
@@ -102,7 +88,7 @@
#define BOARD_NCR53C400 1
#define BOARD_NCR53C400A 2
#define BOARD_DTC3181E 3
+#define BOARD_HP_C2502 4
-#endif /* ndef ASM */
#endif /* GENERIC_NCR5380_H */
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index d54381149c0d..057fdeb720ac 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -247,41 +247,36 @@
/* ITCT header */
/* qw0 */
#define ITCT_HDR_DEV_TYPE_OFF 0
-#define ITCT_HDR_DEV_TYPE_MSK (0x3 << ITCT_HDR_DEV_TYPE_OFF)
+#define ITCT_HDR_DEV_TYPE_MSK (0x3ULL << ITCT_HDR_DEV_TYPE_OFF)
#define ITCT_HDR_VALID_OFF 2
-#define ITCT_HDR_VALID_MSK (0x1 << ITCT_HDR_VALID_OFF)
-#define ITCT_HDR_BREAK_REPLY_ENA_OFF 3
-#define ITCT_HDR_BREAK_REPLY_ENA_MSK (0x1 << ITCT_HDR_BREAK_REPLY_ENA_OFF)
+#define ITCT_HDR_VALID_MSK (0x1ULL << ITCT_HDR_VALID_OFF)
#define ITCT_HDR_AWT_CONTROL_OFF 4
-#define ITCT_HDR_AWT_CONTROL_MSK (0x1 << ITCT_HDR_AWT_CONTROL_OFF)
+#define ITCT_HDR_AWT_CONTROL_MSK (0x1ULL << ITCT_HDR_AWT_CONTROL_OFF)
#define ITCT_HDR_MAX_CONN_RATE_OFF 5
-#define ITCT_HDR_MAX_CONN_RATE_MSK (0xf << ITCT_HDR_MAX_CONN_RATE_OFF)
+#define ITCT_HDR_MAX_CONN_RATE_MSK (0xfULL << ITCT_HDR_MAX_CONN_RATE_OFF)
#define ITCT_HDR_VALID_LINK_NUM_OFF 9
-#define ITCT_HDR_VALID_LINK_NUM_MSK (0xf << ITCT_HDR_VALID_LINK_NUM_OFF)
+#define ITCT_HDR_VALID_LINK_NUM_MSK (0xfULL << ITCT_HDR_VALID_LINK_NUM_OFF)
#define ITCT_HDR_PORT_ID_OFF 13
-#define ITCT_HDR_PORT_ID_MSK (0x7 << ITCT_HDR_PORT_ID_OFF)
+#define ITCT_HDR_PORT_ID_MSK (0x7ULL << ITCT_HDR_PORT_ID_OFF)
#define ITCT_HDR_SMP_TIMEOUT_OFF 16
-#define ITCT_HDR_SMP_TIMEOUT_MSK (0xffff << ITCT_HDR_SMP_TIMEOUT_OFF)
-#define ITCT_HDR_MAX_BURST_BYTES_OFF 16
-#define ITCT_HDR_MAX_BURST_BYTES_MSK (0xffffffff << \
- ITCT_MAX_BURST_BYTES_OFF)
+#define ITCT_HDR_SMP_TIMEOUT_MSK (0xffffULL << ITCT_HDR_SMP_TIMEOUT_OFF)
/* qw1 */
#define ITCT_HDR_MAX_SAS_ADDR_OFF 0
#define ITCT_HDR_MAX_SAS_ADDR_MSK (0xffffffffffffffff << \
ITCT_HDR_MAX_SAS_ADDR_OFF)
/* qw2 */
#define ITCT_HDR_IT_NEXUS_LOSS_TL_OFF 0
-#define ITCT_HDR_IT_NEXUS_LOSS_TL_MSK (0xffff << \
+#define ITCT_HDR_IT_NEXUS_LOSS_TL_MSK (0xffffULL << \
ITCT_HDR_IT_NEXUS_LOSS_TL_OFF)
#define ITCT_HDR_BUS_INACTIVE_TL_OFF 16
-#define ITCT_HDR_BUS_INACTIVE_TL_MSK (0xffff << \
+#define ITCT_HDR_BUS_INACTIVE_TL_MSK (0xffffULL << \
ITCT_HDR_BUS_INACTIVE_TL_OFF)
#define ITCT_HDR_MAX_CONN_TL_OFF 32
-#define ITCT_HDR_MAX_CONN_TL_MSK (0xffff << \
+#define ITCT_HDR_MAX_CONN_TL_MSK (0xffffULL << \
ITCT_HDR_MAX_CONN_TL_OFF)
#define ITCT_HDR_REJ_OPEN_TL_OFF 48
-#define ITCT_HDR_REJ_OPEN_TL_MSK (0xffff << \
- ITCT_REJ_OPEN_TL_OFF)
+#define ITCT_HDR_REJ_OPEN_TL_MSK (0xffffULL << \
+ ITCT_HDR_REJ_OPEN_TL_OFF)
/* Err record header */
#define ERR_HDR_DMA_TX_ERR_TYPE_OFF 0
@@ -533,10 +528,10 @@ static void setup_itct_v1_hw(struct hisi_hba *hisi_hba,
itct->sas_addr = __swab64(itct->sas_addr);
/* qw2 */
- itct->qw2 = cpu_to_le64((500 < ITCT_HDR_IT_NEXUS_LOSS_TL_OFF) |
- (0xff00 < ITCT_HDR_BUS_INACTIVE_TL_OFF) |
- (0xff00 < ITCT_HDR_MAX_CONN_TL_OFF) |
- (0xff00 < ITCT_HDR_REJ_OPEN_TL_OFF));
+ itct->qw2 = cpu_to_le64((500ULL << ITCT_HDR_IT_NEXUS_LOSS_TL_OFF) |
+ (0xff00ULL << ITCT_HDR_BUS_INACTIVE_TL_OFF) |
+ (0xff00ULL << ITCT_HDR_MAX_CONN_TL_OFF) |
+ (0xff00ULL << ITCT_HDR_REJ_OPEN_TL_OFF));
}
static void free_device_v1_hw(struct hisi_hba *hisi_hba,
@@ -544,7 +539,8 @@ static void free_device_v1_hw(struct hisi_hba *hisi_hba,
{
u64 dev_id = sas_dev->device_id;
struct hisi_sas_itct *itct = &hisi_hba->itct[dev_id];
- u32 qw0, reg_val = hisi_sas_read32(hisi_hba, CFG_AGING_TIME);
+ u64 qw0;
+ u32 reg_val = hisi_sas_read32(hisi_hba, CFG_AGING_TIME);
reg_val |= CFG_AGING_TIME_ITCT_REL_MSK;
hisi_sas_write32(hisi_hba, CFG_AGING_TIME, reg_val);
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index 4e1a632ccf16..f8b88fa78e62 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -43,6 +43,7 @@ typedef struct {
unsigned dp:1; /* Data phase present */
unsigned rd:1; /* Read data in data phase */
unsigned wanted:1; /* Parport sharing busy flag */
+ unsigned int dev_no; /* Device number */
wait_queue_head_t *waiting;
struct Scsi_Host *host;
struct list_head list;
@@ -1120,15 +1121,40 @@ static struct scsi_host_template imm_template = {
static LIST_HEAD(imm_hosts);
+/*
+ * Finds the first available device number that can be alloted to the
+ * new imm device and returns the address of the previous node so that
+ * we can add to the tail and have a list in the ascending order.
+ */
+
+static inline imm_struct *find_parent(void)
+{
+ imm_struct *dev, *par = NULL;
+ unsigned int cnt = 0;
+
+ if (list_empty(&imm_hosts))
+ return NULL;
+
+ list_for_each_entry(dev, &imm_hosts, list) {
+ if (dev->dev_no != cnt)
+ return par;
+ cnt++;
+ par = dev;
+ }
+
+ return par;
+}
+
static int __imm_attach(struct parport *pb)
{
struct Scsi_Host *host;
- imm_struct *dev;
+ imm_struct *dev, *temp;
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waiting);
DEFINE_WAIT(wait);
int ports;
int modes, ppb;
int err = -ENOMEM;
+ struct pardev_cb imm_cb;
init_waitqueue_head(&waiting);
@@ -1141,9 +1167,15 @@ static int __imm_attach(struct parport *pb)
dev->mode = IMM_AUTODETECT;
INIT_LIST_HEAD(&dev->list);
- dev->dev = parport_register_device(pb, "imm", NULL, imm_wakeup,
- NULL, 0, dev);
+ temp = find_parent();
+ if (temp)
+ dev->dev_no = temp->dev_no + 1;
+
+ memset(&imm_cb, 0, sizeof(imm_cb));
+ imm_cb.private = dev;
+ imm_cb.wakeup = imm_wakeup;
+ dev->dev = parport_register_dev_model(pb, "imm", &imm_cb, dev->dev_no);
if (!dev->dev)
goto out;
@@ -1207,7 +1239,10 @@ static int __imm_attach(struct parport *pb)
host->unique_id = pb->number;
*(imm_struct **)&host->hostdata = dev;
dev->host = host;
- list_add_tail(&dev->list, &imm_hosts);
+ if (!temp)
+ list_add_tail(&dev->list, &imm_hosts);
+ else
+ list_add_tail(&dev->list, &temp->list);
err = scsi_add_host(host, NULL);
if (err)
goto out2;
@@ -1245,9 +1280,10 @@ static void imm_detach(struct parport *pb)
}
static struct parport_driver imm_driver = {
- .name = "imm",
- .attach = imm_attach,
- .detach = imm_detach,
+ .name = "imm",
+ .match_port = imm_attach,
+ .detach = imm_detach,
+ .devmodel = true,
};
static int __init imm_driver_init(void)
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 536cd5a80422..1c3759bab80b 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -4003,13 +4003,12 @@ static ssize_t ipr_store_update_fw(struct device *dev,
struct ipr_sglist *sglist;
char fname[100];
char *src;
- int len, result, dnld_size;
+ int result, dnld_size;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- len = snprintf(fname, 99, "%s", buf);
- fname[len-1] = '\0';
+ snprintf(fname, sizeof(fname), "%s", buf);
if (request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) {
dev_err(&ioa_cfg->pdev->dev, "Firmware file %s not found\n", fname);
diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
index d64a769b8155..bb2381314a2b 100644
--- a/drivers/scsi/mac_scsi.c
+++ b/drivers/scsi/mac_scsi.c
@@ -12,7 +12,6 @@
*/
#include <linux/types.h>
-#include <linux/delay.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
@@ -32,14 +31,13 @@
#define PSEUDO_DMA
#define NCR5380_implementation_fields unsigned char *pdma_base
-#define NCR5380_local_declare() struct Scsi_Host *_instance
-#define NCR5380_setup(instance) _instance = instance
-#define NCR5380_read(reg) macscsi_read(_instance, reg)
-#define NCR5380_write(reg, value) macscsi_write(_instance, reg, value)
+#define NCR5380_read(reg) macscsi_read(instance, reg)
+#define NCR5380_write(reg, value) macscsi_write(instance, reg, value)
#define NCR5380_pread macscsi_pread
#define NCR5380_pwrite macscsi_pwrite
+#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
#define NCR5380_intr macscsi_intr
#define NCR5380_queue_command macscsi_queue_command
@@ -51,8 +49,6 @@
#include "NCR5380.h"
-#define RESET_BOOT
-
static int setup_can_queue = -1;
module_param(setup_can_queue, int, 0);
static int setup_cmd_per_lun = -1;
@@ -65,17 +61,8 @@ static int setup_use_tagged_queuing = -1;
module_param(setup_use_tagged_queuing, int, 0);
static int setup_hostid = -1;
module_param(setup_hostid, int, 0);
-
-/* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms,
- * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more
- * need ten times the standard value... */
-#define TOSHIBA_DELAY
-
-#ifdef TOSHIBA_DELAY
-#define AFTER_RESET_DELAY (5*HZ/2)
-#else
-#define AFTER_RESET_DELAY (HZ/2)
-#endif
+static int setup_toshiba_delay = -1;
+module_param(setup_toshiba_delay, int, 0);
/*
* NCR 5380 register access functions
@@ -94,12 +81,12 @@ static inline void macscsi_write(struct Scsi_Host *instance, int reg, int value)
#ifndef MODULE
static int __init mac_scsi_setup(char *str)
{
- int ints[7];
+ int ints[8];
(void)get_options(str, ARRAY_SIZE(ints), ints);
- if (ints[0] < 1 || ints[0] > 6) {
- pr_err("Usage: mac5380=<can_queue>[,<cmd_per_lun>[,<sg_tablesize>[,<hostid>[,<use_tags>[,<use_pdma>]]]]]\n");
+ if (ints[0] < 1) {
+ pr_err("Usage: mac5380=<can_queue>[,<cmd_per_lun>[,<sg_tablesize>[,<hostid>[,<use_tags>[,<use_pdma>[,<toshiba_delay>]]]]]]\n");
return 0;
}
if (ints[0] >= 1)
@@ -114,50 +101,14 @@ static int __init mac_scsi_setup(char *str)
setup_use_tagged_queuing = ints[5];
if (ints[0] >= 6)
setup_use_pdma = ints[6];
+ if (ints[0] >= 7)
+ setup_toshiba_delay = ints[7];
return 1;
}
__setup("mac5380=", mac_scsi_setup);
#endif /* !MODULE */
-#ifdef RESET_BOOT
-/*
- * Our 'bus reset on boot' function
- */
-
-static void mac_scsi_reset_boot(struct Scsi_Host *instance)
-{
- unsigned long end;
-
- NCR5380_local_declare();
- NCR5380_setup(instance);
-
- /*
- * Do a SCSI reset to clean up the bus during initialization. No messing
- * with the queues, interrupts, or locks necessary here.
- */
-
- printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." );
-
- /* get in phase */
- NCR5380_write( TARGET_COMMAND_REG,
- PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
-
- /* assert RST */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
- /* The min. reset hold time is 25us, so 40us should be enough */
- udelay( 50 );
- /* reset RST and interrupt */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
- NCR5380_read( RESET_PARITY_INTERRUPT_REG );
-
- for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
- barrier();
-
- printk(KERN_INFO " done\n" );
-}
-#endif
-
#ifdef PSEUDO_DMA
/*
Pseudo-DMA: (Ove Edlund)
@@ -235,9 +186,6 @@ static int macscsi_pread(struct Scsi_Host *instance,
unsigned char *d;
unsigned char *s;
- NCR5380_local_declare();
- NCR5380_setup(instance);
-
s = hostdata->pdma_base + (INPUT_DATA_REG << 4);
d = dst;
@@ -329,9 +277,6 @@ static int macscsi_pwrite(struct Scsi_Host *instance,
unsigned char *s;
unsigned char *d;
- NCR5380_local_declare();
- NCR5380_setup(instance);
-
s = src;
d = hostdata->pdma_base + (OUTPUT_DATA_REG << 4);
@@ -364,20 +309,22 @@ static int macscsi_pwrite(struct Scsi_Host *instance,
#define PFX DRV_MODULE_NAME ": "
static struct scsi_host_template mac_scsi_template = {
- .module = THIS_MODULE,
- .proc_name = DRV_MODULE_NAME,
- .show_info = macscsi_show_info,
- .write_info = macscsi_write_info,
- .name = "Macintosh NCR5380 SCSI",
- .info = macscsi_info,
- .queuecommand = macscsi_queue_command,
- .eh_abort_handler = macscsi_abort,
- .eh_bus_reset_handler = macscsi_bus_reset,
- .can_queue = 16,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 2,
- .use_clustering = DISABLE_CLUSTERING
+ .module = THIS_MODULE,
+ .proc_name = DRV_MODULE_NAME,
+ .show_info = macscsi_show_info,
+ .write_info = macscsi_write_info,
+ .name = "Macintosh NCR5380 SCSI",
+ .info = macscsi_info,
+ .queuecommand = macscsi_queue_command,
+ .eh_abort_handler = macscsi_abort,
+ .eh_bus_reset_handler = macscsi_bus_reset,
+ .can_queue = 16,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 2,
+ .use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
static int __init mac_scsi_probe(struct platform_device *pdev)
@@ -432,15 +379,14 @@ static int __init mac_scsi_probe(struct platform_device *pdev)
} else
host_flags |= FLAG_NO_PSEUDO_DMA;
-#ifdef RESET_BOOT
- mac_scsi_reset_boot(instance);
-#endif
-
#ifdef SUPPORT_TAGS
host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
#endif
+ host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0;
- NCR5380_init(instance, host_flags);
+ error = NCR5380_init(instance, host_flags);
+ if (error)
+ goto fail_init;
if (instance->irq != NO_IRQ) {
error = request_irq(instance->irq, macscsi_intr, IRQF_SHARED,
@@ -449,6 +395,8 @@ static int __init mac_scsi_probe(struct platform_device *pdev)
goto fail_irq;
}
+ NCR5380_maybe_reset_bus(instance);
+
error = scsi_add_host(instance, NULL);
if (error)
goto fail_host;
@@ -463,6 +411,7 @@ fail_host:
free_irq(instance->irq, instance);
fail_irq:
NCR5380_exit(instance);
+fail_init:
scsi_host_put(instance);
return error;
}
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index a70692779a16..4cf9ed96414f 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -179,8 +179,12 @@ mraid_mm_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
/*
* The following call will block till a kioc is available
+ * or return NULL if the list head is empty for the pointer
+ * of type mraid_mmapt passed to mraid_mm_alloc_kioc
*/
kioc = mraid_mm_alloc_kioc(adp);
+ if (!kioc)
+ return -ENXIO;
/*
* User sent the old mimd_t ioctl packet. Convert it to uioc_t.
diff --git a/drivers/scsi/pas16.c b/drivers/scsi/pas16.c
index e81eadd08afc..512037e27783 100644
--- a/drivers/scsi/pas16.c
+++ b/drivers/scsi/pas16.c
@@ -1,6 +1,4 @@
#define PSEUDO_DMA
-#define UNSAFE /* Not unsafe for PAS16 -- use it */
-#define PDEBUG 0
/*
* This driver adapted from Drew Eckhardt's Trantor T128 driver
@@ -71,14 +69,10 @@
#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/proc_fs.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <linux/blkdev.h>
-#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/stat.h>
#include <linux/init.h>
#include <scsi/scsi_host.h>
@@ -87,8 +81,8 @@
#include "NCR5380.h"
-static unsigned short pas16_addr = 0;
-static int pas16_irq = 0;
+static unsigned short pas16_addr;
+static int pas16_irq;
static const int scsi_irq_translate[] =
@@ -146,22 +140,6 @@ static const unsigned short pas16_offset[ 8 ] =
* START_DMA_INITIATOR_RECEIVE_REG wo
*/
};
-/*----------------------------------------------------------------*/
-/* the following will set the monitor border color (useful to find
- where something crashed or gets stuck at */
-/* 1 = blue
- 2 = green
- 3 = cyan
- 4 = red
- 5 = magenta
- 6 = yellow
- 7 = white
-*/
-#if 1
-#define rtrc(i) {inb(0x3da); outb(0x31, 0x3c0); outb((i), 0x3c0);}
-#else
-#define rtrc(i) {}
-#endif
/*
@@ -205,7 +183,7 @@ static void __init
outb( 0x01, io_port + P_TIMEOUT_STATUS_REG_OFFSET ); /* Reset TC */
outb( 0x01, io_port + WAIT_STATE ); /* 1 Wait state */
- NCR5380_read( RESET_PARITY_INTERRUPT_REG );
+ inb(io_port + pas16_offset[RESET_PARITY_INTERRUPT_REG]);
/* Set the SCSI interrupt pointer without mucking up the sound
* interrupt pointer in the same byte.
@@ -280,13 +258,13 @@ static int __init
* put in an additional test to try to weed them out.
*/
- outb( 0x01, io_port + WAIT_STATE ); /* 1 Wait state */
- NCR5380_write( MODE_REG, 0x20 ); /* Is it really SCSI? */
- if( NCR5380_read( MODE_REG ) != 0x20 ) /* Write to a reg. */
- return 0; /* and try to read */
- NCR5380_write( MODE_REG, 0x00 ); /* it back. */
- if( NCR5380_read( MODE_REG ) != 0x00 )
- return 0;
+ outb(0x01, io_port + WAIT_STATE); /* 1 Wait state */
+ outb(0x20, io_port + pas16_offset[MODE_REG]); /* Is it really SCSI? */
+ if (inb(io_port + pas16_offset[MODE_REG]) != 0x20) /* Write to a reg. */
+ return 0; /* and try to read */
+ outb(0x00, io_port + pas16_offset[MODE_REG]); /* it back. */
+ if (inb(io_port + pas16_offset[MODE_REG]) != 0x00)
+ return 0;
return 1;
}
@@ -305,7 +283,7 @@ static int __init
static int __init pas16_setup(char *str)
{
- static int commandline_current = 0;
+ static int commandline_current;
int i;
int ints[10];
@@ -344,8 +322,8 @@ __setup("pas16=", pas16_setup);
static int __init pas16_detect(struct scsi_host_template *tpnt)
{
- static int current_override = 0;
- static unsigned short current_base = 0;
+ static int current_override;
+ static unsigned short current_base;
struct Scsi_Host *instance;
unsigned short io_port;
int count;
@@ -377,34 +355,32 @@ static int __init pas16_detect(struct scsi_host_template *tpnt)
}
else
for (; !io_port && (current_base < NO_BASES); ++current_base) {
-#if (PDEBUG & PDEBUG_INIT)
- printk("scsi-pas16 : probing io_port %04x\n", (unsigned int) bases[current_base].io_port);
-#endif
+ dprintk(NDEBUG_INIT, "pas16: probing io_port 0x%04x\n",
+ (unsigned int)bases[current_base].io_port);
if ( !bases[current_base].noauto &&
pas16_hw_detect( current_base ) ){
io_port = bases[current_base].io_port;
init_board( io_port, default_irqs[ current_base ], 0 );
-#if (PDEBUG & PDEBUG_INIT)
- printk("scsi-pas16 : detected board.\n");
-#endif
+ dprintk(NDEBUG_INIT, "pas16: detected board\n");
}
}
-
-#if defined(PDEBUG) && (PDEBUG & PDEBUG_INIT)
- printk("scsi-pas16 : io_port = %04x\n", (unsigned int) io_port);
-#endif
+ dprintk(NDEBUG_INIT, "pas16: io_port = 0x%04x\n",
+ (unsigned int)io_port);
if (!io_port)
break;
instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
if(instance == NULL)
- break;
+ goto out;
instance->io_port = io_port;
- NCR5380_init(instance, 0);
+ if (NCR5380_init(instance, 0))
+ goto out_unregister;
+
+ NCR5380_maybe_reset_bus(instance);
if (overrides[current_override].irq != IRQ_AUTO)
instance->irq = overrides[current_override].irq;
@@ -431,14 +407,18 @@ static int __init pas16_detect(struct scsi_host_template *tpnt)
outb( (inb(io_port + IO_CONFIG_3) & 0x0f), io_port + IO_CONFIG_3 );
}
-#if defined(PDEBUG) && (PDEBUG & PDEBUG_INIT)
- printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
-#endif
+ dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n",
+ instance->host_no, instance->irq);
++current_override;
++count;
}
return count;
+
+out_unregister:
+ scsi_unregister(instance);
+out:
+ return count;
}
/*
@@ -561,29 +541,29 @@ static int pas16_release(struct Scsi_Host *shost)
if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
- if (shost->io_port && shost->n_io_port)
- release_region(shost->io_port, shost->n_io_port);
scsi_unregister(shost);
return 0;
}
static struct scsi_host_template driver_template = {
- .name = "Pro Audio Spectrum-16 SCSI",
- .detect = pas16_detect,
- .release = pas16_release,
- .proc_name = "pas16",
- .show_info = pas16_show_info,
- .write_info = pas16_write_info,
- .info = pas16_info,
- .queuecommand = pas16_queue_command,
- .eh_abort_handler = pas16_abort,
- .eh_bus_reset_handler = pas16_bus_reset,
- .bios_param = pas16_biosparam,
- .can_queue = CAN_QUEUE,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = CMD_PER_LUN,
- .use_clustering = DISABLE_CLUSTERING,
+ .name = "Pro Audio Spectrum-16 SCSI",
+ .detect = pas16_detect,
+ .release = pas16_release,
+ .proc_name = "pas16",
+ .show_info = pas16_show_info,
+ .write_info = pas16_write_info,
+ .info = pas16_info,
+ .queuecommand = pas16_queue_command,
+ .eh_abort_handler = pas16_abort,
+ .eh_bus_reset_handler = pas16_bus_reset,
+ .bios_param = pas16_biosparam,
+ .can_queue = 32,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 2,
+ .use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
#include "scsi_module.c"
diff --git a/drivers/scsi/pas16.h b/drivers/scsi/pas16.h
index c6109c80050b..d37527717225 100644
--- a/drivers/scsi/pas16.h
+++ b/drivers/scsi/pas16.h
@@ -24,9 +24,6 @@
#ifndef PAS16_H
#define PAS16_H
-#define PDEBUG_INIT 0x1
-#define PDEBUG_TRANSFER 0x2
-
#define PAS16_DEFAULT_BASE_1 0x388
#define PAS16_DEFAULT_BASE_2 0x384
#define PAS16_DEFAULT_BASE_3 0x38c
@@ -98,46 +95,16 @@
#define OPERATION_MODE_1 0xec03
#define IO_CONFIG_3 0xf002
+#define NCR5380_implementation_fields /* none */
-#ifndef ASM
-
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 32
-#endif
-
-#define NCR5380_implementation_fields \
- volatile unsigned short io_port
-
-#define NCR5380_local_declare() \
- volatile unsigned short io_port
+#define PAS16_io_port(reg) (instance->io_port + pas16_offset[(reg)])
-#define NCR5380_setup(instance) \
- io_port = (instance)->io_port
-
-#define PAS16_io_port(reg) ( io_port + pas16_offset[(reg)] )
-
-#if !(PDEBUG & PDEBUG_TRANSFER)
#define NCR5380_read(reg) ( inb(PAS16_io_port(reg)) )
#define NCR5380_write(reg, value) ( outb((value),PAS16_io_port(reg)) )
-#else
-#define NCR5380_read(reg) \
- (((unsigned char) printk("scsi%d : read register %d at io_port %04x\n"\
- , instance->hostno, (reg), PAS16_io_port(reg))), inb( PAS16_io_port(reg)) )
-
-#define NCR5380_write(reg, value) \
- (printk("scsi%d : write %02x to register %d at io_port %04x\n", \
- instance->hostno, (value), (reg), PAS16_io_port(reg)), \
- outb( (value),PAS16_io_port(reg) ) )
-
-#endif
+#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
#define NCR5380_intr pas16_intr
-#define do_NCR5380_intr do_pas16_intr
#define NCR5380_queue_command pas16_queue_command
#define NCR5380_abort pas16_abort
#define NCR5380_bus_reset pas16_bus_reset
@@ -150,5 +117,4 @@
#define PAS16_IRQS 0xd4a8
-#endif /* ndef ASM */
#endif /* PAS16_H */
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 2c1160c7ec92..47b9d13f97b8 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -227,6 +227,7 @@ static struct {
{"Promise", "VTrak E610f", NULL, BLIST_SPARSELUN | BLIST_NO_RSOC},
{"Promise", "", NULL, BLIST_SPARSELUN},
{"QNAP", "iSCSI Storage", NULL, BLIST_MAX_1024},
+ {"SYNOLOGY", "iSCSI Storage", NULL, BLIST_MAX_1024},
{"QUANTUM", "XP34301", "1071", BLIST_NOTQ},
{"REGAL", "CDC-4X", NULL, BLIST_MAX5LUN | BLIST_SINGLELUN},
{"SanDisk", "ImageMate CF-SD1", NULL, BLIST_FORCELUN},
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 41c115c230d9..55627d097873 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -390,7 +390,7 @@ module_param(storvsc_ringbuffer_size, int, S_IRUGO);
MODULE_PARM_DESC(storvsc_ringbuffer_size, "Ring buffer size (bytes)");
module_param(storvsc_vcpus_per_sub_channel, int, S_IRUGO);
-MODULE_PARM_DESC(vcpus_per_sub_channel, "Ratio of VCPUs to subchannels");
+MODULE_PARM_DESC(storvsc_vcpus_per_sub_channel, "Ratio of VCPUs to subchannels");
/*
* Timeout in seconds for all devices managed by this driver.
*/
diff --git a/drivers/scsi/sun3_scsi.c b/drivers/scsi/sun3_scsi.c
index 22a42836d193..b9de487bbd31 100644
--- a/drivers/scsi/sun3_scsi.c
+++ b/drivers/scsi/sun3_scsi.c
@@ -53,13 +53,12 @@
#define NCR5380_queue_command sun3scsi_queue_command
#define NCR5380_bus_reset sun3scsi_bus_reset
#define NCR5380_abort sun3scsi_abort
-#define NCR5380_show_info sun3scsi_show_info
#define NCR5380_info sun3scsi_info
#define NCR5380_dma_read_setup(instance, data, count) \
- sun3scsi_dma_setup(data, count, 0)
+ sun3scsi_dma_setup(instance, data, count, 0)
#define NCR5380_dma_write_setup(instance, data, count) \
- sun3scsi_dma_setup(data, count, 1)
+ sun3scsi_dma_setup(instance, data, count, 1)
#define NCR5380_dma_residual(instance) \
sun3scsi_dma_residual(instance)
#define NCR5380_dma_xfer_len(instance, cmd, phase) \
@@ -86,10 +85,6 @@ module_param(setup_use_tagged_queuing, int, 0);
static int setup_hostid = -1;
module_param(setup_hostid, int, 0);
-/* #define RESET_BOOT */
-
-#define AFTER_RESET_DELAY (HZ/2)
-
/* ms to wait after hitting dma regs */
#define SUN3_DMA_DELAY 10
@@ -100,11 +95,10 @@ static struct scsi_cmnd *sun3_dma_setup_done;
static unsigned char *sun3_scsi_regp;
static volatile struct sun3_dma_regs *dregs;
static struct sun3_udc_regs *udc_regs;
-static unsigned char *sun3_dma_orig_addr = NULL;
-static unsigned long sun3_dma_orig_count = 0;
-static int sun3_dma_active = 0;
-static unsigned long last_residual = 0;
-static struct Scsi_Host *default_instance;
+static unsigned char *sun3_dma_orig_addr;
+static unsigned long sun3_dma_orig_count;
+static int sun3_dma_active;
+static unsigned long last_residual;
/*
* NCR 5380 register access functions
@@ -144,50 +138,12 @@ static inline void sun3_udc_write(unsigned short val, unsigned char reg)
}
#endif
-#ifdef RESET_BOOT
-static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
-{
- unsigned long end;
-
- /*
- * Do a SCSI reset to clean up the bus during initialization. No
- * messing with the queues, interrupts, or locks necessary here.
- */
-
- printk( "Sun3 SCSI: resetting the SCSI bus..." );
-
- /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */
-// sun3_disable_irq( IRQ_SUN3_SCSI );
-
- /* get in phase */
- NCR5380_write( TARGET_COMMAND_REG,
- PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
-
- /* assert RST */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
-
- /* The min. reset hold time is 25us, so 40us should be enough */
- udelay( 50 );
-
- /* reset RST and interrupt */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
- NCR5380_read( RESET_PARITY_INTERRUPT_REG );
-
- for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
- barrier();
-
- /* switch on SCSI IRQ again */
-// sun3_enable_irq( IRQ_SUN3_SCSI );
-
- printk( " done\n" );
-}
-#endif
-
// safe bits for the CSR
#define CSR_GOOD 0x060f
-static irqreturn_t scsi_sun3_intr(int irq, void *dummy)
+static irqreturn_t scsi_sun3_intr(int irq, void *dev)
{
+ struct Scsi_Host *instance = dev;
unsigned short csr = dregs->csr;
int handled = 0;
@@ -196,46 +152,24 @@ static irqreturn_t scsi_sun3_intr(int irq, void *dummy)
#endif
if(csr & ~CSR_GOOD) {
- if(csr & CSR_DMA_BUSERR) {
- printk("scsi%d: bus error in dma\n", default_instance->host_no);
- }
-
- if(csr & CSR_DMA_CONFLICT) {
- printk("scsi%d: dma conflict\n", default_instance->host_no);
- }
+ if (csr & CSR_DMA_BUSERR)
+ shost_printk(KERN_ERR, instance, "bus error in DMA\n");
+ if (csr & CSR_DMA_CONFLICT)
+ shost_printk(KERN_ERR, instance, "DMA conflict\n");
handled = 1;
}
if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
- NCR5380_intr(irq, dummy);
+ NCR5380_intr(irq, dev);
handled = 1;
}
return IRQ_RETVAL(handled);
}
-/*
- * Debug stuff - to be called on NMI, or sysrq key. Use at your own risk;
- * reentering NCR5380_print_status seems to have ugly side effects
- */
-
-/* this doesn't seem to get used at all -- sam */
-#if 0
-void sun3_sun3_debug (void)
-{
- unsigned long flags;
-
- if (default_instance) {
- local_irq_save(flags);
- NCR5380_print_status(default_instance);
- local_irq_restore(flags);
- }
-}
-#endif
-
-
/* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
-static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag)
+static unsigned long sun3scsi_dma_setup(struct Scsi_Host *instance,
+ void *data, unsigned long count, int write_flag)
{
void *addr;
@@ -287,10 +221,9 @@ static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int wri
dregs->csr |= CSR_FIFO;
if(dregs->fifo_count != count) {
- printk("scsi%d: fifo_mismatch %04x not %04x\n",
- default_instance->host_no, dregs->fifo_count,
- (unsigned int) count);
- NCR5380_dprint(NDEBUG_DMA, default_instance);
+ shost_printk(KERN_ERR, instance, "FIFO mismatch %04x not %04x\n",
+ dregs->fifo_count, (unsigned int) count);
+ NCR5380_dprint(NDEBUG_DMA, instance);
}
/* setup udc */
@@ -325,21 +258,6 @@ static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int wri
}
-#ifndef SUN3_SCSI_VME
-static inline unsigned long sun3scsi_dma_count(struct Scsi_Host *instance)
-{
- unsigned short resid;
-
- dregs->udc_addr = 0x32;
- udelay(SUN3_DMA_DELAY);
- resid = dregs->udc_data;
- udelay(SUN3_DMA_DELAY);
- resid *= 2;
-
- return (unsigned long) resid;
-}
-#endif
-
static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance)
{
return last_residual;
@@ -437,7 +355,10 @@ static int sun3scsi_dma_finish(int write_flag)
}
}
- count = sun3scsi_dma_count(default_instance);
+ dregs->udc_addr = 0x32;
+ udelay(SUN3_DMA_DELAY);
+ count = 2 * dregs->udc_data;
+ udelay(SUN3_DMA_DELAY);
fifo = dregs->fifo_count;
last_residual = fifo;
@@ -502,17 +423,17 @@ static int sun3scsi_dma_finish(int write_flag)
static struct scsi_host_template sun3_scsi_template = {
.module = THIS_MODULE,
.proc_name = DRV_MODULE_NAME,
- .show_info = sun3scsi_show_info,
.name = SUN3_SCSI_NAME,
.info = sun3scsi_info,
.queuecommand = sun3scsi_queue_command,
- .eh_abort_handler = sun3scsi_abort,
- .eh_bus_reset_handler = sun3scsi_bus_reset,
+ .eh_abort_handler = sun3scsi_abort,
+ .eh_bus_reset_handler = sun3scsi_bus_reset,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_NONE,
.cmd_per_lun = 2,
- .use_clustering = DISABLE_CLUSTERING
+ .use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
};
static int __init sun3_scsi_probe(struct platform_device *pdev)
@@ -591,7 +512,6 @@ static int __init sun3_scsi_probe(struct platform_device *pdev)
error = -ENOMEM;
goto fail_alloc;
}
- default_instance = instance;
instance->io_port = (unsigned long)ioaddr;
instance->irq = irq->start;
@@ -600,7 +520,9 @@ static int __init sun3_scsi_probe(struct platform_device *pdev)
host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
#endif
- NCR5380_init(instance, host_flags);
+ error = NCR5380_init(instance, host_flags);
+ if (error)
+ goto fail_init;
error = request_irq(instance->irq, scsi_sun3_intr, 0,
"NCR5380", instance);
@@ -631,9 +553,7 @@ static int __init sun3_scsi_probe(struct platform_device *pdev)
dregs->ivect = VME_DATA24 | (instance->irq & 0xff);
#endif
-#ifdef RESET_BOOT
- sun3_scsi_reset_boot(instance);
-#endif
+ NCR5380_maybe_reset_bus(instance);
error = scsi_add_host(instance, NULL);
if (error)
@@ -649,6 +569,7 @@ fail_host:
free_irq(instance->irq, instance);
fail_irq:
NCR5380_exit(instance);
+fail_init:
scsi_host_put(instance);
fail_alloc:
if (udc_regs)
diff --git a/drivers/scsi/t128.c b/drivers/scsi/t128.c
index 87828acbf7c6..4615fda60dbd 100644
--- a/drivers/scsi/t128.c
+++ b/drivers/scsi/t128.c
@@ -68,14 +68,11 @@
* 15 9-11
*/
-#include <linux/signal.h>
#include <linux/io.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
-#include <linux/stat.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include "t128.h"
@@ -126,7 +123,7 @@ static struct signature {
static int __init t128_setup(char *str)
{
- static int commandline_current = 0;
+ static int commandline_current;
int i;
int ints[10];
@@ -165,7 +162,7 @@ __setup("t128=", t128_setup);
static int __init t128_detect(struct scsi_host_template *tpnt)
{
- static int current_override = 0, current_base = 0;
+ static int current_override, current_base;
struct Scsi_Host *instance;
unsigned long base;
void __iomem *p;
@@ -182,9 +179,8 @@ static int __init t128_detect(struct scsi_host_template *tpnt)
base = 0;
} else
for (; !base && (current_base < NO_BASES); ++current_base) {
-#if (TDEBUG & TDEBUG_INIT)
- printk("scsi-t128 : probing address %08x\n", bases[current_base].address);
-#endif
+ dprintk(NDEBUG_INIT, "t128: probing address 0x%08x\n",
+ bases[current_base].address);
if (bases[current_base].noauto)
continue;
p = ioremap(bases[current_base].address, 0x2000);
@@ -195,17 +191,13 @@ static int __init t128_detect(struct scsi_host_template *tpnt)
signatures[sig].string,
strlen(signatures[sig].string))) {
base = bases[current_base].address;
-#if (TDEBUG & TDEBUG_INIT)
- printk("scsi-t128 : detected board.\n");
-#endif
+ dprintk(NDEBUG_INIT, "t128: detected board\n");
goto found;
}
iounmap(p);
}
-#if defined(TDEBUG) && (TDEBUG & TDEBUG_INIT)
- printk("scsi-t128 : base = %08x\n", (unsigned int) base);
-#endif
+ dprintk(NDEBUG_INIT, "t128: base = 0x%08x\n", (unsigned int)base);
if (!base)
break;
@@ -213,12 +205,15 @@ static int __init t128_detect(struct scsi_host_template *tpnt)
found:
instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
if(instance == NULL)
- break;
-
+ goto out_unmap;
+
instance->base = base;
((struct NCR5380_hostdata *)instance->hostdata)->base = p;
- NCR5380_init(instance, 0);
+ if (NCR5380_init(instance, 0))
+ goto out_unregister;
+
+ NCR5380_maybe_reset_bus(instance);
if (overrides[current_override].irq != IRQ_AUTO)
instance->irq = overrides[current_override].irq;
@@ -242,27 +237,30 @@ found:
printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
-#if defined(TDEBUG) && (TDEBUG & TDEBUG_INIT)
- printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
-#endif
+ dprintk(NDEBUG_INIT, "scsi%d: irq = %d\n",
+ instance->host_no, instance->irq);
++current_override;
++count;
}
return count;
+
+out_unregister:
+ scsi_unregister(instance);
+out_unmap:
+ iounmap(p);
+ return count;
}
static int t128_release(struct Scsi_Host *shost)
{
- NCR5380_local_declare();
- NCR5380_setup(shost);
+ struct NCR5380_hostdata *hostdata = shost_priv(shost);
+
if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
- if (shost->io_port && shost->n_io_port)
- release_region(shost->io_port, shost->n_io_port);
scsi_unregister(shost);
- iounmap(base);
+ iounmap(hostdata->base);
return 0;
}
@@ -308,14 +306,14 @@ static int t128_biosparam(struct scsi_device *sdev, struct block_device *bdev,
* timeout.
*/
-static inline int NCR5380_pread (struct Scsi_Host *instance, unsigned char *dst,
- int len) {
- NCR5380_local_declare();
- void __iomem *reg;
+static inline int
+NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ void __iomem *reg, *base = hostdata->base;
unsigned char *d = dst;
register int i = len;
- NCR5380_setup(instance);
reg = base + T_DATA_REG_OFFSET;
#if 0
@@ -354,14 +352,14 @@ static inline int NCR5380_pread (struct Scsi_Host *instance, unsigned char *dst,
* timeout.
*/
-static inline int NCR5380_pwrite (struct Scsi_Host *instance, unsigned char *src,
- int len) {
- NCR5380_local_declare();
- void __iomem *reg;
+static inline int
+NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ void __iomem *reg, *base = hostdata->base;
unsigned char *s = src;
register int i = len;
- NCR5380_setup(instance);
reg = base + T_DATA_REG_OFFSET;
#if 0
@@ -392,21 +390,23 @@ MODULE_LICENSE("GPL");
#include "NCR5380.c"
static struct scsi_host_template driver_template = {
- .name = "Trantor T128/T128F/T228",
- .detect = t128_detect,
- .release = t128_release,
- .proc_name = "t128",
- .show_info = t128_show_info,
- .write_info = t128_write_info,
- .info = t128_info,
- .queuecommand = t128_queue_command,
- .eh_abort_handler = t128_abort,
- .eh_bus_reset_handler = t128_bus_reset,
- .bios_param = t128_biosparam,
- .can_queue = CAN_QUEUE,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = CMD_PER_LUN,
- .use_clustering = DISABLE_CLUSTERING,
+ .name = "Trantor T128/T128F/T228",
+ .detect = t128_detect,
+ .release = t128_release,
+ .proc_name = "t128",
+ .show_info = t128_show_info,
+ .write_info = t128_write_info,
+ .info = t128_info,
+ .queuecommand = t128_queue_command,
+ .eh_abort_handler = t128_abort,
+ .eh_bus_reset_handler = t128_bus_reset,
+ .bios_param = t128_biosparam,
+ .can_queue = 32,
+ .this_id = 7,
+ .sg_tablesize = SG_ALL,
+ .cmd_per_lun = 2,
+ .use_clustering = DISABLE_CLUSTERING,
+ .cmd_size = NCR5380_CMD_SIZE,
+ .max_sectors = 128,
};
#include "scsi_module.c"
diff --git a/drivers/scsi/t128.h b/drivers/scsi/t128.h
index 2c7371454dfd..dd16d85497e1 100644
--- a/drivers/scsi/t128.h
+++ b/drivers/scsi/t128.h
@@ -23,10 +23,6 @@
#ifndef T128_H
#define T128_H
-#define TDEBUG 0
-#define TDEBUG_INIT 0x1
-#define TDEBUG_TRANSFER 0x2
-
/*
* The trantor boards are memory mapped. They use an NCR5380 or
* equivalent (my sample board had part second sourced from ZILOG).
@@ -71,44 +67,18 @@
#define T_DATA_REG_OFFSET 0x1e00 /* rw 512 bytes long */
-#ifndef ASM
-
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 32
-#endif
-
#define NCR5380_implementation_fields \
void __iomem *base
-#define NCR5380_local_declare() \
- void __iomem *base
-
-#define NCR5380_setup(instance) \
- base = ((struct NCR5380_hostdata *)(instance->hostdata))->base
+#define T128_address(reg) \
+ (((struct NCR5380_hostdata *)shost_priv(instance))->base + T_5380_OFFSET + ((reg) * 0x20))
-#define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20))
-
-#if !(TDEBUG & TDEBUG_TRANSFER)
#define NCR5380_read(reg) readb(T128_address(reg))
#define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))
-#else
-#define NCR5380_read(reg) \
- (((unsigned char) printk("scsi%d : read register %d at address %08x\n"\
- , instance->hostno, (reg), T128_address(reg))), readb(T128_address(reg)))
-
-#define NCR5380_write(reg, value) { \
- printk("scsi%d : write %02x to register %d at address %08x\n", \
- instance->hostno, (value), (reg), T128_address(reg)); \
- writeb((value), (T128_address(reg))); \
-}
-#endif
+
+#define NCR5380_dma_xfer_len(instance, cmd, phase) (cmd->transfersize)
#define NCR5380_intr t128_intr
-#define do_NCR5380_intr do_t128_intr
#define NCR5380_queue_command t128_queue_command
#define NCR5380_abort t128_abort
#define NCR5380_bus_reset t128_bus_reset
@@ -121,5 +91,4 @@
#define T128_IRQS 0xc4a8
-#endif /* ndef ASM */
#endif /* T128_H */