diff options
author | Ramesh Gupta G <grgupta@ti.com> | 2009-07-01 19:38:29 -0500 |
---|---|---|
committer | Hari Kanigeri <h-kanigeri2@ti.com> | 2009-07-01 19:41:03 -0500 |
commit | 496ef4fbc56dda409f61400e25b3815e4efd5ae1 (patch) | |
tree | bf10cc7e8618fde99830b69d729a405c54a7ab1b | |
parent | 47ddac742e4a42face9fdaaa5f5f90633caa0cba (diff) |
OMAP4 Syslink Release Notes
This patch provides OMAP4 Syslink release notes for
L24.0.9 release.
Signed-off-by: Ramesh Gupta G <grgupta@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
-rwxr-xr-x[-rw-r--r--] | TI_OMAP4_Syslink_Release_Notes_L24.x.txt | 125 |
1 files changed, 105 insertions, 20 deletions
diff --git a/TI_OMAP4_Syslink_Release_Notes_L24.x.txt b/TI_OMAP4_Syslink_Release_Notes_L24.x.txt index dab88ace8d08..609ded631803 100644..100755 --- a/TI_OMAP4_Syslink_Release_Notes_L24.x.txt +++ b/TI_OMAP4_Syslink_Release_Notes_L24.x.txt @@ -3,7 +3,7 @@ OMAP4 Syslink List Handoff ================================================================================ Author : Ramesh Gupta G / Suman Anna -Date : June 1 2009 +Date : June 30 2009 =========== Summary: @@ -60,7 +60,7 @@ contact TI counter part. ======= Setup: ======= -Virtio : VPOM4430_1.08a + patch1 +Virtio : VPOM4430_1.09a + patch3 CCS: Version 3.3 with VPOM simulator. For more information on CCS availability please contact TI. CCSv4 with VPOM simulator is also supported. @@ -106,7 +106,7 @@ From the Kernel sources run below commands. <M> Syslink Procmgr <M> Proc 4430 Device Drivers --><M> DSP Bridge driver--> - [*] DSP Bridge Debug Support + [M] DSP Bridge Debug Support Select DSP Bridge Debug Support option as above. 7. Save Configuration @@ -124,7 +124,10 @@ From the Kernel sources run below commands. 13. Run below command once the kernel is built. - 14. Make CROSS_COMPILE=arm-none-linux-gnueabi- modules + 14. Make CROSS_COMPILE=arm-none-linux-gnueabi- modules. This command + is applicable only if we select the required drivers as modules. + if all the drivers are selected as part of the kernel steps + from 14 to 23 can be ignored. 15. Bridgedriver module (bridgedriver.ko) is built under folder drivers/dsp/bridge/ dspbridge module(dspbridge.ko) is built @@ -226,12 +229,19 @@ Build the syslink samples by running below commands. Run make command as below. - 2. make PREFIX=<path to syslink folder> TGTROOT=<path to syslink folder> clean + 2. make PREFIX=<path to syslink folder> TGTROOT=<path to syslink folder> + KRNLSRC=<kernel sources > clean 3. make PREFIX=<path to syslink folder> TGTROOT=<path to syslink folder> + KRNLSRC=<kernel sources > 4. The sample .out files are build in the respective source directories underneath syslink/samples folder. + 5. The kernel sample procmgr_app.ko is built under + syslink/samples/proc_sample/krnl + 6. make sure to build the samples from the same session from which the + kernel is built or export ARCH and PATH variables as mentioned + in above in kernel building. ======================================== Building Tesla images and Ducati samples @@ -255,7 +265,10 @@ Running Tesla Samples 2. Once kernel is booted, cd into the folder where all the binaries are placed. - 3. install all the drivers in the sequence as below + 3. install all the drivers in the sequence as below, this step is + required only if the drivers are build as modules, + if all the drivers are build as part of the kernel one can + ignore steps 3 and 4 insmod omap_notify.ko @@ -339,7 +352,10 @@ Running Syslink Samples 2. Once kernel is booted, cd into the folder where all the binaries are placed. - 3. install all the drivers in the sequence as below + 3. install all the drivers in the sequence as below, this step is + required only if the drivers are build as modules, + if all the drivers are build as part of the kernel one can + ignore steps 3 and 4 insmod omap_notify.ko @@ -393,7 +409,7 @@ Remove the IVAHD-iCONT1, IVAHD-iCONT2, and Modena. The System Configuration must have only Tesla and Duati-ARM-M3-1, Ducati-ARM-M3-2 ------------------------------------------------------------------------------- -Two baseimages Bios6Boot.xm3 and Bios6Boot_Core1.xm3 can be used to validate +Two baseimages Bios6Boot.xem3 and Bios6Boot_Core1.xem3 can be used to validate the BIOS6 boot validation on each of the cores respectively. Please contact TI representative for these images. @@ -406,7 +422,10 @@ to boot the Core1 as well. 2. Break the platform by typing 'y' in the Virtio Console after the bash shell prompt appears. - 3. install below drivers in below sequence. + 3. install all the drivers in the sequence as below, this step is + required only if the drivers are build as modules, + if all the drivers are build as part of the kernel one can + ignore this step insmod omap_notify.ko @@ -418,7 +437,6 @@ to boot the Core1 as well. 4. The syslink_proc4430 driver programs MMU and updates page table entries. - 5. Break the Virtio by typing y in console. 6. Open CCS and select Ducati core. @@ -426,9 +444,10 @@ to boot the Core1 as well. 7. Load the base image into Ducati core0. 8. In Virtio design , browse to - VPOM4430->SDP->OMAP4430-> InitValue_DUCATI_SYS_1. Right click and open. - - Right click on Signal (InitValue) and select Send Signal To Platform. + VPOM4430->SDP->OMAP4430-> InitValue_DUCATI_SYS_1. + Right click and open. + Right click on Signal (InitValue) and select + Send Signal To Platform. Send 1 and press OK. This resets the core. 9. Press F11 once to have the Reset release become effective. @@ -440,7 +459,9 @@ Running Notify ping sample on Ducati: ------------------------------------- 1. Boot Vartio as usual. 2. Follow the same steps as above install required drivers (step 3 - above). + above), this step is required only if the drivers + are build as modules, if all the drivers are build + as part of the kernel one can ignore this step 3. create nodes for ipcnotify and notifyducatidrv accordinngly. e.g: mknod /dev/ipcnotify c 232 0 mknod /dev/notifyducatidrv c 234 0 @@ -453,7 +474,7 @@ Running Notify ping sample on Ducati: 7. Open CCS and select Ducati-ARM-M3-1 core. - 6. Load ducati image (notifyxfer_bios6.xm3) image. + 6. Load ducati image (notifyxfer_bios6.xem3) image. 7. Open source file notifyxfer_bios6.c file and add some breakpoints in the main function. @@ -468,6 +489,61 @@ Running Notify ping sample on Ducati: 10. The Notifyping sample running on the Chiron shows event messages and call back function messages. +Loading ducati images using the userspace loader: +------------------------------------------------ + 1. On successful ducati sample build user space binary loader + ducati_load.out is build underi folder + syslink/samples/samples/procmgr/ducati_load/ + 2. One can load the ducati image on to SYSM3 or APPM3 using the + userspace binary loader as below. + ./ducati_load.out <image_name> + 3. on successful load the loader displays the entry point for + the image at the end. + + ------snip---- + loaded_program: 0xea19 + Completed Loading Image ..... notifyxfer_bios6.xem3 + entry_point is 0xea19 + Hit any key to terminate cexec. + -------------- + 4. Due to Virtio issues we cannot start SYSM3/APPM3 from the + MPU side, one has to use CCS for SYSM3/APPM3 start by + following below step. + 5. Break Virtio and open CCS, Select the processor on which + image is loaded. + 6. Open the PC registers. + 7. Set the PC value to the entry point displayed from the loading + step. + 8. Run couple of times step run. + 9. Run the Processor. + +loading images on both SYSM3/APPM3 processors +--------------------------------------------- + +Follow below procedure to load images on both SYSM3/APPM3 using +user space loader + + 1. SYSM3 should be reached main() before loading the APPM3 image. + 2. SYSM3 should be in running state to load APPM3 from MPU using + user space loader. Otherwise MPU will not respond. + 3. Because of the above reasons, one need to introduce a continuos + while loop in both the SYSM3/APPM3 programs immediately in the main() + function at the first place. e.g: + + while(flag) + ; + 4. Load the SYSM3 image using the loader, set the PC using CCS and tun the + SYSM3 processor. Now SYSM3 executing the while(flag) loop. + 5. Load the APPM3 using the loader, set the PC using the CCS and run the + APPM3 processor, now the APPM3 is executing the while(flag) loop. + 6. Stop APPM3 processor. + 7. Stop SYSM3 processor. + 8. Bring SYSM3 out of while loop by changing the variable flag to 0 on the + fly. + 9. Bring APP3 out of while loop by changing the variable flag to 0 on the + fly. + 10. Run SYSM3 and Run APPM3. + ================================================================================ Highlights / Important Notes ================================================================================ @@ -477,7 +553,6 @@ Tesla Bridge ============== Features Introduced -------------------------- -- All modules now can be built alng with the Kernel. - Fixed checkpatch errors and warnings for all modules under syslink. - Dynamic Loading Support has been added. - Bridge Trace Support has been added. @@ -487,7 +562,12 @@ Features Introduced ============== Syslink ============== -- First version of Syslink IPC code. +- RCM server and client works on Chiron, Ducati SYSM3 and APPM3. +- Added load support by Proc manager. +- All modules can be built along with the Kernel. +- All modules are working as expected. +- Userspace binary image loader utility is implemented for loading images on + Ducati. Ducati Bridge ============== @@ -508,6 +588,8 @@ Important Notes set bootargs root=/dev/ram0 rw mem=54M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480 + - One need to have CCS to start the Ducati processors as the Virtio doesn't have + the PRCM support to reset Ducati processors. - Code Composer Studio is required to write the Start DSP Address to the PC register * CCS_v3.3_SR9_79.exe or CCS_v3.3_SR10_80.exe or CCS_v3.3_SR11 @@ -526,9 +608,7 @@ Important Notes ================================== Issues Resolved ================================== - - Due to timing issues some of the static samples were not - working properly. This issue got fixed. Please refer - TI internal tracking id:OMAPS00198805 + - NONE ================================== Known Issues @@ -539,3 +619,8 @@ Known Issues is not backward compatible with Virtio versions < 1.06a. 3. Notipy ping sample some times not working because of timing issues. Need to have break points in Ducati side. + 4. CCS is required to start Ducati processors (SYSM3/APPM3), as the + current Virtio doesn't have the PRCM support to reset Ducati Processors. + 5. ping sample is not working in dynamic mode in Tesla due to dependant + library issue this is been tracked by internal tracking number id: + OMAPS00202802 |