summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2022-05-30 10:56:18 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2022-05-30 10:56:18 -0700
commit2d2da475ac0eebfbf40e5c5ca8c0409d62d23424 (patch)
tree2eecb1c2010924a767fcff86c9d80a6d1ac26b31
parentb00ed48bb0a7c295facf9036135a573a5cdbe7de (diff)
parent6b8be804ff376f6657ccdf6b29974e7c793d88c4 (diff)
Merge tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer: "A collection of changes to add elf-fdpic loader support for m68k. Also a collection of various fixes. They include typo corrections, undefined symbol compilation fixes, removal of the ISA_DMA_API support and removal of unused code. Summary: - correctly set up ZERO_PAGE pointer - drop ISA_DMA_API support - fix comment typos - fixes for undefined symbols - remove unused code and variables - elf-fdpic loader support for m68k" * tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix 68000 CPU link with no platform selected m68k: removed unused "mach_get_ss" m68knommu: fix undefined reference to `mach_get_rtc_pll' m68knommu: fix undefined reference to `_init_sp' m68knommu: allow elf_fdpic loader to be selected m68knommu: add definitions to support elf_fdpic program loader m68knommu: implement minimal regset support m68knommu: use asm-generic/mmu.h for nommu setups m68k: fix typos in comments m68k: coldfire: drop ISA_DMA_API support m68knommu: set ZERO_PAGE() to the allocated zeroed page
-rw-r--r--arch/m68k/Kconfig.bus10
-rw-r--r--arch/m68k/Kconfig.cpu2
-rw-r--r--arch/m68k/Kconfig.machine1
-rw-r--r--arch/m68k/coldfire/Makefile2
-rw-r--r--arch/m68k/coldfire/dma.c43
-rw-r--r--arch/m68k/coldfire/intc.c2
-rw-r--r--arch/m68k/coldfire/m53xx.c2
-rw-r--r--arch/m68k/coldfire/pci.c2
-rw-r--r--arch/m68k/hp300/config.c7
-rw-r--r--arch/m68k/include/asm/dma.h483
-rw-r--r--arch/m68k/include/asm/elf.h9
-rw-r--r--arch/m68k/include/asm/machdep.h1
-rw-r--r--arch/m68k/include/asm/mmu.h4
-rw-r--r--arch/m68k/include/asm/pgtable_no.h3
-rw-r--r--arch/m68k/include/uapi/asm/ptrace.h5
-rw-r--r--arch/m68k/kernel/ptrace.c58
-rw-r--r--arch/m68k/kernel/setup_mm.c9
-rw-r--r--arch/m68k/kernel/setup_no.c1
-rw-r--r--arch/m68k/kernel/time.c9
-rw-r--r--arch/m68k/mm/motorola.c1
-rw-r--r--arch/m68k/q40/config.c7
-rw-r--r--drivers/mmc/host/Kconfig2
-rw-r--r--fs/Kconfig.binfmt2
-rw-r--r--sound/core/Makefile2
-rw-r--r--sound/isa/Kconfig2
25 files changed, 93 insertions, 576 deletions
diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
index d1e93a39cd3b..d5c0b2990ee1 100644
--- a/arch/m68k/Kconfig.bus
+++ b/arch/m68k/Kconfig.bus
@@ -56,16 +56,6 @@ config ATARI_ROM_ISA
The only driver currently using this adapter is the EtherNEC
driver for RTL8019AS based NE2000 compatible network cards.
-config GENERIC_ISA_DMA
- def_bool ISA
-
source "drivers/zorro/Kconfig"
endif
-
-if COLDFIRE
-
-config ISA_DMA_API
- def_bool !M5272
-
-endif
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 3d5da25c73b5..f3aa44156969 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -37,7 +37,7 @@ endchoice
if M68KCLASSIC
config M68000
- bool
+ def_bool y
depends on !MMU
select CPU_HAS_NO_BITFIELDS
select CPU_HAS_NO_CAS
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index 188a8f8a0104..a1042568b9ad 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -352,6 +352,7 @@ comment "Machine Options"
config UBOOT
bool "Support for U-Boot command line parameters"
+ depends on COLDFIRE
help
If you say Y here kernel will try to collect command
line parameters from the initial u-boot stack.
diff --git a/arch/m68k/coldfire/Makefile b/arch/m68k/coldfire/Makefile
index a3e18d73d8b8..9419a6c1f036 100644
--- a/arch/m68k/coldfire/Makefile
+++ b/arch/m68k/coldfire/Makefile
@@ -15,7 +15,7 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-obj-$(CONFIG_COLDFIRE) += cache.o clk.o device.o dma.o entry.o vectors.o
+obj-$(CONFIG_COLDFIRE) += cache.o clk.o device.o entry.o vectors.o
obj-$(CONFIG_M5206) += m5206.o intc.o reset.o
obj-$(CONFIG_M5206e) += m5206.o intc.o reset.o
obj-$(CONFIG_M520x) += m520x.o intc-simr.o reset.o
diff --git a/arch/m68k/coldfire/dma.c b/arch/m68k/coldfire/dma.c
deleted file mode 100644
index c3279f7467d7..000000000000
--- a/arch/m68k/coldfire/dma.c
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/***************************************************************************/
-
-/*
- * dma.c -- Freescale ColdFire DMA support
- *
- * Copyright (C) 2007, Greg Ungerer (gerg@snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/dma.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
-
-/***************************************************************************/
-
-/*
- * DMA channel base address table.
- */
-unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
-#ifdef MCFDMA_BASE0
- MCFDMA_BASE0,
-#endif
-#ifdef MCFDMA_BASE1
- MCFDMA_BASE1,
-#endif
-#ifdef MCFDMA_BASE2
- MCFDMA_BASE2,
-#endif
-#ifdef MCFDMA_BASE3
- MCFDMA_BASE3,
-#endif
-};
-EXPORT_SYMBOL(dma_base_addr);
-
-unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
-EXPORT_SYMBOL(dma_device_address);
-
-/***************************************************************************/
diff --git a/arch/m68k/coldfire/intc.c b/arch/m68k/coldfire/intc.c
index cce257420388..20c084e932c8 100644
--- a/arch/m68k/coldfire/intc.c
+++ b/arch/m68k/coldfire/intc.c
@@ -28,7 +28,7 @@
unsigned char mcf_irq2imr[NR_IRQS];
/*
- * Define the miniumun and maximum external interrupt numbers.
+ * Define the minimum and maximum external interrupt numbers.
* This is also used as the "level" interrupt numbers.
*/
#define EIRQ1 25
diff --git a/arch/m68k/coldfire/m53xx.c b/arch/m68k/coldfire/m53xx.c
index bd033e1975bf..17af5f673796 100644
--- a/arch/m68k/coldfire/m53xx.c
+++ b/arch/m68k/coldfire/m53xx.c
@@ -532,7 +532,7 @@ int clock_pll(int fsys, int flags)
writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_CKE,
MCF_SDRAMC_SDCR);
- /* Errata - workaround for SDRAM opeartion after exiting LIMP mode */
+ /* Errata - workaround for SDRAM operation after exiting LIMP mode */
writel(MCF_SDRAMC_REFRESH, MCF_SDRAMC_LIMP_FIX);
/* wait for DQS logic to relock */
diff --git a/arch/m68k/coldfire/pci.c b/arch/m68k/coldfire/pci.c
index 84eab0f5e00a..ceb5775b8d23 100644
--- a/arch/m68k/coldfire/pci.c
+++ b/arch/m68k/coldfire/pci.c
@@ -31,7 +31,7 @@ static struct pci_bus *rootbus;
static unsigned long iospace;
/*
- * We need to be carefull probing on bus 0 (directly connected to host
+ * We need to be careful probing on bus 0 (directly connected to host
* bridge). We should only access the well defined possible devices in
* use, ignore aliases and the like.
*/
diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index 2c92843397c3..e4bd6913f50e 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -240,12 +240,6 @@ static int hp300_hwclk(int op, struct rtc_time *t)
return 0;
}
-static unsigned int hp300_get_ss(void)
-{
- return hp300_rtc_read(RTC_REG_SEC1) * 10 +
- hp300_rtc_read(RTC_REG_SEC2);
-}
-
static void __init hp300_init_IRQ(void)
{
}
@@ -256,7 +250,6 @@ void __init config_hp300(void)
mach_init_IRQ = hp300_init_IRQ;
mach_get_model = hp300_get_model;
mach_hwclk = hp300_hwclk;
- mach_get_ss = hp300_get_ss;
mach_reset = hp300_reset;
#ifdef CONFIG_HEARTBEAT
mach_heartbeat = hp300_pulse;
diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h
index ae2021964e32..f6c5e0dfb4e5 100644
--- a/arch/m68k/include/asm/dma.h
+++ b/arch/m68k/include/asm/dma.h
@@ -2,493 +2,10 @@
#ifndef _M68K_DMA_H
#define _M68K_DMA_H 1
-#ifdef CONFIG_COLDFIRE
-/*
- * ColdFire DMA Model:
- * ColdFire DMA supports two forms of DMA: Single and Dual address. Single
- * address mode emits a source address, and expects that the device will either
- * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
- * the device will place data on the correct byte(s) of the data bus, as the
- * memory transactions are always 32 bits. This implies that only 32 bit
- * devices will find single mode transfers useful. Dual address DMA mode
- * performs two cycles: source read and destination write. ColdFire will
- * align the data so that the device will always get the correct bytes, thus
- * is useful for 8 and 16 bit devices. This is the mode that is supported
- * below.
- *
- * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
- * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * AUG/25/2000 : added support for 8, 16 and 32-bit Single-Address-Mode (K)2000
- * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
- *
- * APR/18/2002 : added proper support for MCF5272 DMA controller.
- * Arthur Shipkowski (art@videon-central.com)
- */
-
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
-
-/*
- * Set number of channels of DMA on ColdFire for different implementations.
- */
-#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
- defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
- defined(CONFIG_M528x) || defined(CONFIG_M525x)
-
-#define MAX_M68K_DMA_CHANNELS 4
-#elif defined(CONFIG_M5272)
-#define MAX_M68K_DMA_CHANNELS 1
-#elif defined(CONFIG_M53xx)
-#define MAX_M68K_DMA_CHANNELS 0
-#else
-#define MAX_M68K_DMA_CHANNELS 2
-#endif
-
-extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
-extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
-
-#if !defined(CONFIG_M5272)
-#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */
-#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */
-#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */
-#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ 0
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE 1
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD 2
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD 3
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG 4
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG 5
-/* I/O to memory, 8 bits, single-address-mode */
-#define DMA_MODE_READ_SINGLE 8
-/* memory to I/O, 8 bits, single-address-mode */
-#define DMA_MODE_WRITE_SINGLE 9
-/* I/O to memory, 16 bits, single-address-mode */
-#define DMA_MODE_READ_WORD_SINGLE 10
-/* memory to I/O, 16 bits, single-address-mode */
-#define DMA_MODE_WRITE_WORD_SINGLE 11
-/* I/O to memory, 32 bits, single-address-mode */
-#define DMA_MODE_READ_LONG_SINGLE 12
-/* memory to I/O, 32 bits, single-address-mode */
-#define DMA_MODE_WRITE_LONG_SINGLE 13
-
-#else /* CONFIG_M5272 is defined */
-
-/* Source static-address mode */
-#define DMA_MODE_SRC_SA_BIT 0x01
-/* Two bits to select between all four modes */
-#define DMA_MODE_SSIZE_MASK 0x06
-/* Offset to shift bits in */
-#define DMA_MODE_SSIZE_OFF 0x01
-/* Destination static-address mode */
-#define DMA_MODE_DES_SA_BIT 0x10
-/* Two bits to select between all four modes */
-#define DMA_MODE_DSIZE_MASK 0x60
-/* Offset to shift bits in */
-#define DMA_MODE_DSIZE_OFF 0x05
-/* Size modifiers */
-#define DMA_MODE_SIZE_LONG 0x00
-#define DMA_MODE_SIZE_BYTE 0x01
-#define DMA_MODE_SIZE_WORD 0x02
-#define DMA_MODE_SIZE_LINE 0x03
-
-/*
- * Aliases to help speed quick ports; these may be suboptimal, however. They
- * do not include the SINGLE mode modifiers since the MCF5272 does not have a
- * mode where the device is in control of its addressing.
- */
-
-/* I/O to memory, 8 bits, mode */
-#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 8 bits, mode */
-#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 16 bits, mode */
-#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 16 bits, mode */
-#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-/* I/O to memory, 32 bits, mode */
-#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
-/* memory to I/O, 32 bits, mode */
-#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
-
-#endif /* !defined(CONFIG_M5272) */
-
-#if !defined(CONFIG_M5272)
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
- volatile unsigned short *dmawp;
- volatile unsigned char *dmapb;
-
-#ifdef DMA_DEBUG
- printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmapb = (unsigned char *) dma_base_addr[dmanr];
-
- /* Turn off external requests, and stop any DMA in progress */
- dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
- dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
- volatile unsigned char *dmabp;
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
-
- dmabp = (unsigned char *) dma_base_addr[dmanr];
- dmawp = (unsigned short *) dma_base_addr[dmanr];
-
- /* Clear config errors */
- dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
-
- /* Set command register */
- dmawp[MCFDMA_DCR] =
- MCFDMA_DCR_INT | /* Enable completion irq */
- MCFDMA_DCR_CS | /* Force one xfer per request */
- MCFDMA_DCR_AA | /* Enable auto alignment */
- /* single-address-mode */
- ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
- /* sets s_rw (-> r/w) high if Memory to I/0 */
- ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
- /* Memory to I/O or I/O to Memory */
- ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
- /* 32 bit, 16 bit or 8 bit transfers */
- ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD :
- ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
- MCFDMA_DCR_SSIZE_BYTE)) |
- ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD :
- ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
- MCFDMA_DCR_DSIZE_BYTE));
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
- dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
- (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- volatile unsigned short *dmawp;
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmalp = (unsigned int *) dma_base_addr[dmanr];
-
- /* Determine which address registers are used for memory/device accesses */
- if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
- /* Source incrementing, must be memory */
- dmalp[MCFDMA_SAR] = a;
- /* Set dest address, must be device */
- dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
- } else {
- /* Destination incrementing, must be memory */
- dmalp[MCFDMA_DAR] = a;
- /* Set source address, must be device */
- dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
- }
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
- __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
- (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
- (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
- printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- dmawp[MCFDMA_BCR] = (unsigned short)count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- volatile unsigned short *dmawp;
- unsigned short count;
-
-#ifdef DMA_DEBUG
- printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
- dmawp = (unsigned short *) dma_base_addr[dmanr];
- count = dmawp[MCFDMA_BCR];
- return((int) count);
-}
-#else /* CONFIG_M5272 is defined */
-
-/*
- * The MCF5272 DMA controller is very different than the controller defined above
- * in terms of register mapping. For instance, with the exception of the 16-bit
- * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
- *
- * The big difference, however, is the lack of device-requested DMA. All modes
- * are dual address transfer, and there is no 'device' setup or direction bit.
- * You can DMA between a device and memory, between memory and memory, or even between
- * two devices directly, with any combination of incrementing and non-incrementing
- * addresses you choose. This puts a crimp in distinguishing between the 'device
- * address' set up by set_dma_device_addr.
- *
- * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr,
- * which will act exactly as above in -- it will look to see if the source is set to
- * autoincrement, and if so it will make the source use the set_dma_addr value and the
- * destination the set_dma_device_addr value. Otherwise the source will be set to the
- * set_dma_device_addr value and the destination will get the set_dma_addr value.
- *
- * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
- * and make it explicit. Depending on what you're doing, one of these two should work
- * for you, but don't mix them in the same transfer setup.
- */
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("enable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("disable_dma(dmanr=%d)\n", dmanr);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
-
- /* Turn off external requests, and stop any DMA in progress */
- dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
- dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-}
-
-/*
- * Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while interrupts are disabled! ---
- *
- * This is a NOP for ColdFire. Provide a stub for compatibility.
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-
- volatile unsigned int *dmalp;
- volatile unsigned short *dmawp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
-#endif
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- dmawp = (unsigned short *) dma_base_addr[dmanr];
-
- /* Clear config errors */
- dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
-
- /* Set command register */
- dmalp[MCFDMA_DMR] =
- MCFDMA_DMR_RQM_DUAL | /* Mandatory Request Mode setting */
- MCFDMA_DMR_DSTT_SD | /* Set up addressing types; set to supervisor-data. */
- MCFDMA_DMR_SRCT_SD | /* Set up addressing types; set to supervisor-data. */
- /* source static-address-mode */
- ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
- /* dest static-address-mode */
- ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
- /* burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 */
- (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
- (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
-
- dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
- dmanr, (int) &dmalp[MCFDMA_DMR], dmalp[MCFDMA_DMR],
- (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
-#endif
-}
-
-/* Set transfer address for specific DMA channel */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
-
- /* Determine which address registers are used for memory/device accesses */
- if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
- /* Source incrementing, must be memory */
- dmalp[MCFDMA_DSAR] = a;
- /* Set dest address, must be device */
- dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
- } else {
- /* Destination incrementing, must be memory */
- dmalp[MCFDMA_DDAR] = a;
- /* Set source address, must be device */
- dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
- }
-
-#ifdef DEBUG_DMA
- printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
- __FILE__, __LINE__, dmanr, (int) &dmalp[MCFDMA_DMR], dmalp[MCFDMA_DMR],
- (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
- (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
-#endif
-}
-
-/*
- * Specific for Coldfire - sets device address.
- * Should be called after the mode set call, and before set DMA address.
- */
-static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
-{
-#ifdef DMA_DEBUG
- printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
-#endif
-
- dma_device_address[dmanr] = a;
-}
-
-/*
- * NOTE 2: "count" represents _bytes_.
- *
- * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
- volatile unsigned int *dmalp;
-
-#ifdef DMA_DEBUG
- printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- dmalp[MCFDMA_DBCR] = count;
-}
-
-/*
- * Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- volatile unsigned int *dmalp;
- unsigned int count;
-
-#ifdef DMA_DEBUG
- printk("get_dma_residue(dmanr=%d)\n", dmanr);
-#endif
-
- dmalp = (unsigned int *) dma_base_addr[dmanr];
- count = dmalp[MCFDMA_DBCR];
- return(count);
-}
-
-#endif /* !defined(CONFIG_M5272) */
-#endif /* CONFIG_COLDFIRE */
-
/* it's useless on the m68k, but unfortunately needed by the new
bootmem allocator (but this should do it for this) */
#define MAX_DMA_ADDRESS PAGE_OFFSET
-#define MAX_DMA_CHANNELS 8
-
-extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr); /* release it again */
-
#ifdef CONFIG_PCI
extern int isa_dma_bridge_buggy;
#else
diff --git a/arch/m68k/include/asm/elf.h b/arch/m68k/include/asm/elf.h
index 3d387ceaea3f..2def06a99b08 100644
--- a/arch/m68k/include/asm/elf.h
+++ b/arch/m68k/include/asm/elf.h
@@ -60,6 +60,13 @@ typedef struct user_m68kfp_struct elf_fpregset_t;
is actually used on ASV. */
#define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0
+#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, dynamic_addr) \
+ do { \
+ (_r)->d3 = _exec_map_addr; \
+ (_r)->d4 = _interp_map_addr; \
+ (_r)->d5 = dynamic_addr; \
+ } while(0)
+
#if defined(CONFIG_SUN3) || defined(CONFIG_COLDFIRE)
#define ELF_EXEC_PAGESIZE 8192
#else
@@ -114,4 +121,6 @@ typedef struct user_m68kfp_struct elf_fpregset_t;
#define ELF_PLATFORM (NULL)
+#define ELF_FDPIC_CORE_EFLAGS 0
+
#endif
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
index 8fd80ef1b77e..841ba6aa3fcb 100644
--- a/arch/m68k/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep.h
@@ -19,7 +19,6 @@ extern void (*mach_get_model) (char *model);
extern void (*mach_get_hardware_list) (struct seq_file *m);
/* machine dependent timer functions */
extern int (*mach_hwclk)(int, struct rtc_time*);
-extern unsigned int (*mach_get_ss)(void);
extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
extern int (*mach_set_rtc_pll)(struct rtc_pll_info *);
extern void (*mach_reset)( void );
diff --git a/arch/m68k/include/asm/mmu.h b/arch/m68k/include/asm/mmu.h
index 5c15aacb1370..e00672425b00 100644
--- a/arch/m68k/include/asm/mmu.h
+++ b/arch/m68k/include/asm/mmu.h
@@ -6,9 +6,7 @@
/* Default "unsigned long" context */
typedef unsigned long mm_context_t;
#else
-typedef struct {
- unsigned long end_brk;
-} mm_context_t;
+#include <asm-generic/mmu.h>
#endif
#endif
diff --git a/arch/m68k/include/asm/pgtable_no.h b/arch/m68k/include/asm/pgtable_no.h
index 87151d67d91e..bce5ca56c388 100644
--- a/arch/m68k/include/asm/pgtable_no.h
+++ b/arch/m68k/include/asm/pgtable_no.h
@@ -42,7 +42,8 @@ extern void paging_init(void);
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
*/
-#define ZERO_PAGE(vaddr) (virt_to_page(0))
+extern void *empty_zero_page;
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
/*
* All 32bit addresses are effectively valid for vmalloc...
diff --git a/arch/m68k/include/uapi/asm/ptrace.h b/arch/m68k/include/uapi/asm/ptrace.h
index 19a1b9d0d858..5b50ea592e00 100644
--- a/arch/m68k/include/uapi/asm/ptrace.h
+++ b/arch/m68k/include/uapi/asm/ptrace.h
@@ -74,7 +74,12 @@ struct switch_stack {
#define PTRACE_GET_THREAD_AREA 25
+#define PTRACE_GETFDPIC 31
+
#define PTRACE_SINGLEBLOCK 33 /* resume execution until next branch */
+#define PTRACE_GETFDPIC_EXEC 0
+#define PTRACE_GETFDPIC_INTERP 1
+
#endif /* __ASSEMBLY__ */
#endif /* _UAPI_M68K_PTRACE_H */
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index daebccdd2c09..0a4184a37461 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -19,6 +19,8 @@
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/signal.h>
+#include <linux/regset.h>
+#include <linux/elf.h>
#include <linux/uaccess.h>
#include <asm/page.h>
@@ -284,3 +286,59 @@ asmlinkage void syscall_trace_leave(void)
if (test_thread_flag(TIF_SYSCALL_TRACE))
ptrace_report_syscall_exit(task_pt_regs(current), 0);
}
+
+#if defined(CONFIG_BINFMT_ELF_FDPIC) && defined(CONFIG_ELF_CORE)
+/*
+ * Currently the only thing that needs to use regsets for m68k is the
+ * coredump support of the elf_fdpic loader. Implement the minimum
+ * definitions required for that.
+ */
+static int m68k_regset_get(struct task_struct *target,
+ const struct user_regset *regset,
+ struct membuf to)
+{
+ struct pt_regs *ptregs = task_pt_regs(target);
+ u32 uregs[ELF_NGREG];
+
+ ELF_CORE_COPY_REGS(uregs, ptregs);
+ return membuf_write(&to, uregs, sizeof(uregs));
+}
+
+enum m68k_regset {
+ REGSET_GPR,
+#ifdef CONFIG_FPU
+ REGSET_FPU,
+#endif
+};
+
+static const struct user_regset m68k_user_regsets[] = {
+ [REGSET_GPR] = {
+ .core_note_type = NT_PRSTATUS,
+ .n = ELF_NGREG,
+ .size = sizeof(u32),
+ .align = sizeof(u16),
+ .regset_get = m68k_regset_get,
+ },
+#ifdef CONFIG_FPU
+ [REGSET_FPU] = {
+ .core_note_type = NT_PRFPREG,
+ .n = sizeof(struct user_m68kfp_struct) / sizeof(u32),
+ .size = sizeof(u32),
+ .align = sizeof(u32),
+ }
+#endif /* CONFIG_FPU */
+};
+
+static const struct user_regset_view user_m68k_view = {
+ .name = "m68k",
+ .e_machine = EM_68K,
+ .ei_osabi = ELF_OSABI,
+ .regsets = m68k_user_regsets,
+ .n = ARRAY_SIZE(m68k_user_regsets)
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+ return &user_m68k_view;
+}
+#endif /* CONFIG_BINFMT_ELF_FDPIC && CONFIG_ELF_CORE */
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index 78ab562beb31..656841defd2a 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -87,15 +87,6 @@ void (*mach_sched_init) (void) __initdata = NULL;
void (*mach_init_IRQ) (void) __initdata = NULL;
void (*mach_get_model) (char *model);
void (*mach_get_hardware_list) (struct seq_file *m);
-/* machine dependent timer functions */
-int (*mach_hwclk) (int, struct rtc_time*);
-EXPORT_SYMBOL(mach_hwclk);
-unsigned int (*mach_get_ss)(void);
-int (*mach_get_rtc_pll)(struct rtc_pll_info *);
-int (*mach_set_rtc_pll)(struct rtc_pll_info *);
-EXPORT_SYMBOL(mach_get_ss);
-EXPORT_SYMBOL(mach_get_rtc_pll);
-EXPORT_SYMBOL(mach_set_rtc_pll);
void (*mach_reset)( void );
void (*mach_halt)( void );
void (*mach_power_off)( void );
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 5e4104f07a44..19eea73d3c17 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -50,7 +50,6 @@ char __initdata command_line[COMMAND_LINE_SIZE];
/* machine dependent timer functions */
void (*mach_sched_init)(void) __initdata = NULL;
-int (*mach_hwclk) (int, struct rtc_time*);
/* machine dependent reboot functions */
void (*mach_reset)(void);
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 340ffeea0a9d..a97600b2af50 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -63,6 +63,15 @@ void timer_heartbeat(void)
#endif /* CONFIG_HEARTBEAT */
#ifdef CONFIG_M68KCLASSIC
+/* machine dependent timer functions */
+int (*mach_hwclk) (int, struct rtc_time*);
+EXPORT_SYMBOL(mach_hwclk);
+
+int (*mach_get_rtc_pll)(struct rtc_pll_info *);
+int (*mach_set_rtc_pll)(struct rtc_pll_info *);
+EXPORT_SYMBOL(mach_get_rtc_pll);
+EXPORT_SYMBOL(mach_set_rtc_pll);
+
#if !IS_BUILTIN(CONFIG_RTC_DRV_GENERIC)
void read_persistent_clock64(struct timespec64 *ts)
{
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index ecbe948f4c1a..df7f797c908a 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -27,7 +27,6 @@
#include <asm/pgalloc.h>
#include <asm/machdep.h>
#include <asm/io.h>
-#include <asm/dma.h>
#ifdef CONFIG_ATARI
#include <asm/atari_stram.h>
#endif
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 9237243077ce..c78ee709b458 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -41,7 +41,6 @@ static void q40_get_model(char *model);
extern void q40_sched_init(void);
static int q40_hwclk(int, struct rtc_time *);
-static unsigned int q40_get_ss(void);
static int q40_get_rtc_pll(struct rtc_pll_info *pll);
static int q40_set_rtc_pll(struct rtc_pll_info *pll);
@@ -169,7 +168,6 @@ void __init config_q40(void)
mach_init_IRQ = q40_init_IRQ;
mach_hwclk = q40_hwclk;
- mach_get_ss = q40_get_ss;
mach_get_rtc_pll = q40_get_rtc_pll;
mach_set_rtc_pll = q40_set_rtc_pll;
@@ -246,11 +244,6 @@ static int q40_hwclk(int op, struct rtc_time *t)
return 0;
}
-static unsigned int q40_get_ss(void)
-{
- return bcd2bin(Q40_RTC_SECS);
-}
-
/* get and set PLL calibration of RTC clock */
#define Q40_RTC_PLL_MASK ((1<<5)-1)
#define Q40_RTC_PLL_SIGN (1<<5)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index af6c3c329076..d6144978e32d 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -508,7 +508,7 @@ config MMC_OMAP_HS
config MMC_WBSD
tristate "Winbond W83L51xD SD/MMC Card Interface support"
- depends on ISA_DMA_API && !M68K
+ depends on ISA_DMA_API
help
This selects the Winbond(R) W83L51xD Secure digital and
Multimedia card Interface.
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 32dff7ba3dda..21e154516bf2 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -58,7 +58,7 @@ config ARCH_USE_GNU_PROPERTY
config BINFMT_ELF_FDPIC
bool "Kernel support for FDPIC ELF binaries"
default y if !BINFMT_ELF
- depends on (ARM || (SUPERH && !MMU))
+ depends on ARM || ((M68K || SUPERH) && !MMU)
select ELFCORE
help
ELF FDPIC binaries are based on ELF, but allow the individual load
diff --git a/sound/core/Makefile b/sound/core/Makefile
index 350d704ced98..2762f03d9b7b 100644
--- a/sound/core/Makefile
+++ b/sound/core/Makefile
@@ -9,9 +9,7 @@ ifneq ($(CONFIG_SND_PROC_FS),)
snd-y += info.o
snd-$(CONFIG_SND_OSSEMUL) += info_oss.o
endif
-ifneq ($(CONFIG_M68K),y)
snd-$(CONFIG_ISA_DMA_API) += isadma.o
-endif
snd-$(CONFIG_SND_OSSEMUL) += sound_oss.o
snd-$(CONFIG_SND_VMASTER) += vmaster.o
snd-$(CONFIG_SND_JACK) += ctljack.o jack.o
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index 570b88e0b201..6ffa48dd5983 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -22,7 +22,7 @@ config SND_SB16_DSP
menuconfig SND_ISA
bool "ISA sound devices"
depends on ISA || COMPILE_TEST
- depends on ISA_DMA_API && !M68K
+ depends on ISA_DMA_API
default y
help
Support for sound devices connected via the ISA bus.