Merge tag 'phy-for-4.20-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus

Kishon writes:

phy: for 4.20-rc

 *) Fix updating HSTX_TRIM tuning parameter in qcom-qusb2 PHY driver
 *) Fix inconsistencies between dt-bindings and the driver
 *) Add "Depend on HAS_IOMEM" uniphier-pcie to avoid randconfig errors

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

* tag 'phy-for-4.20-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy:
  phy: qcom-qusb2: Fix HSTX_TRIM tuning with fused value for SDM845
  phy: qcom-qusb2: Use HSTX_TRIM fused value as is
  dt-bindings: phy-qcom-qmp: Fix several mistakes from prior commits
  phy: uniphier-pcie: Depend on HAS_IOMEM

3 files changed, 36 insertions, 18 deletions

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index adf20b2bdf71..fbc198d5dd39 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -40,24 +40,36 @@ Required properties:
 		"ref" for 19.2 MHz ref clk,
 		"com_aux" for phy common block aux clock,
 		"ref_aux" for phy reference aux clock,
+
+		For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
 			"aux", "cfg_ahb", "ref".
 		For "qcom,msm8996-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref".
-		For "qcom,qmp-v3-usb3-phy" must contain:
+		For "qcom,sdm845-qmp-usb3-phy" must contain:
+			"aux", "cfg_ahb", "ref", "com_aux".
+		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
 			"aux", "cfg_ahb", "ref", "com_aux".
+		For "qcom,sdm845-qmp-ufs-phy" must contain:
+			"ref", "ref_aux".
 
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
  - reset-names: "phy" for reset of phy block,
 		"common" for phy common block reset,
-		"cfg" for phy's ahb cfg block reset (Optional).
+		"cfg" for phy's ahb cfg block reset.
+
+		For "qcom,ipq8074-qmp-pcie-phy" must contain:
+			"phy", "common".
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
-		 "phy", "common", "cfg".
+			"phy", "common", "cfg".
 		For "qcom,msm8996-qmp-usb3-phy" must contain
-		 "phy", "common".
-		For "qcom,ipq8074-qmp-pcie-phy" must contain:
-		 "phy", "common".
+			"phy", "common".
+		For "qcom,sdm845-qmp-usb3-phy" must contain:
+			"phy", "common".
+		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
+			"phy", "common".
+		For "qcom,sdm845-qmp-ufs-phy": no resets are listed.
 
  - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
  - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
@@ -79,9 +91,10 @@ Required properties for child node:
 
  - #phy-cells: must be 0
 
+Required properties child node of pcie and usb3 qmp phys:
  - clocks: a list of phandles and clock-specifier pairs,
 	   one for each entry in clock-names.
- - clock-names: Must contain following for pcie and usb qmp phys:
+ - clock-names: Must contain following:
 		 "pipe<lane-number>" for pipe clock specific to each lane.
  - clock-output-names: Name of the PHY clock that will be the parent for
 		       the above pipe clock.
@@ -91,9 +104,11 @@ Required properties for child node:
 			(or)
 		  "pcie20_phy1_pipe_clk"
 
+Required properties for child node of PHYs with lane reset, AKA:
+	"qcom,msm8996-qmp-pcie-phy"
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
- - reset-names: Must contain following for pcie qmp phys:
+ - reset-names: Must contain following:
 		 "lane<lane-number>" for reset specific to each lane.
 
 Example:
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 9ce531194f8a..6d4b44b569bc 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -231,6 +231,7 @@ static const struct qusb2_phy_cfg sdm845_phy_cfg = {
 	.mask_core_ready = CORE_READY_STATUS,
 	.has_pll_override = true,
 	.autoresume_en	  = BIT(0),
+	.update_tune1_with_efuse = true,
 };
 
 static const char * const qusb2_phy_vreg_names[] = {
@@ -402,10 +403,10 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 
 	/*
 	 * Read efuse register having TUNE2/1 parameter's high nibble.
-	 * If efuse register shows value as 0x0, or if we fail to find
-	 * a valid efuse register settings, then use default value
-	 * as 0xB for high nibble that we have already set while
-	 * configuring phy.
+	 * If efuse register shows value as 0x0 (indicating value is not
+	 * fused), or if we fail to find a valid efuse register setting,
+	 * then use default value for high nibble that we have already
+	 * set while configuring the phy.
 	 */
 	val = nvmem_cell_read(qphy->cell, NULL);
 	if (IS_ERR(val) || !val[0]) {
@@ -415,12 +416,13 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 
 	/* Fused TUNE1/2 value is the higher nibble only */
 	if (cfg->update_tune1_with_efuse)
-		qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
-			      val[0] << 0x4);
+		qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
+				 val[0] << HSTX_TRIM_SHIFT,
+				 HSTX_TRIM_MASK);
 	else
-		qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
-			      val[0] << 0x4);
-
+		qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
+				 val[0] << HSTX_TRIM_SHIFT,
+				 HSTX_TRIM_MASK);
 }
 
 static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode)
diff --git a/drivers/phy/socionext/Kconfig b/drivers/phy/socionext/Kconfig
index 467e8147972b..9c85231a6dbc 100644
--- a/drivers/phy/socionext/Kconfig
+++ b/drivers/phy/socionext/Kconfig
@@ -26,7 +26,8 @@ config PHY_UNIPHIER_USB3
 
 config PHY_UNIPHIER_PCIE
 	tristate "Uniphier PHY driver for PCIe controller"
-	depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF && HAS_IOMEM
 	default PCIE_UNIPHIER
 	select GENERIC_PHY
 	help