Merge tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-block

Pull block updates from Jens Axboe:
 "This is the main block updates for 5.3. Nothing earth shattering or
  major in here, just fixes, additions, and improvements all over the
  map. This contains:

   - Series of documentation fixes (Bart)

   - Optimization of the blk-mq ctx get/put (Bart)

   - null_blk removal race condition fix (Bob)

   - req/bio_op() cleanups (Chaitanya)

   - Series cleaning up the segment accounting, and request/bio mapping
     (Christoph)

   - Series cleaning up the page getting/putting for bios (Christoph)

   - block cgroup cleanups and moving it to where it is used (Christoph)

   - block cgroup fixes (Tejun)

   - Series of fixes and improvements to bcache, most notably a write
     deadlock fix (Coly)

   - blk-iolatency STS_AGAIN and accounting fixes (Dennis)

   - Series of improvements and fixes to BFQ (Douglas, Paolo)

   - debugfs_create() return value check removal for drbd (Greg)

   - Use struct_size(), where appropriate (Gustavo)

   - Two lighnvm fixes (Heiner, Geert)

   - MD fixes, including a read balance and corruption fix (Guoqing,
     Marcos, Xiao, Yufen)

   - block opal shadow mbr additions (Jonas, Revanth)

   - sbitmap compare-and-exhange improvemnts (Pavel)

   - Fix for potential bio->bi_size overflow (Ming)

   - NVMe pull requests:
       - improved PCIe suspent support (Keith Busch)
       - error injection support for the admin queue (Akinobu Mita)
       - Fibre Channel discovery improvements (James Smart)
       - tracing improvements including nvmetc tracing support (Minwoo Im)
       - misc fixes and cleanups (Anton Eidelman, Minwoo Im, Chaitanya
         Kulkarni)"

   - Various little fixes and improvements to drivers and core"

* tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-block: (153 commits)
  blk-iolatency: fix STS_AGAIN handling
  block: nr_phys_segments needs to be zero for REQ_OP_WRITE_ZEROES
  blk-mq: simplify blk_mq_make_request()
  blk-mq: remove blk_mq_put_ctx()
  sbitmap: Replace cmpxchg with xchg
  block: fix .bi_size overflow
  block: sed-opal: check size of shadow mbr
  block: sed-opal: ioctl for writing to shadow mbr
  block: sed-opal: add ioctl for done-mark of shadow mbr
  block: never take page references for ITER_BVEC
  direct-io: use bio_release_pages in dio_bio_complete
  block_dev: use bio_release_pages in bio_unmap_user
  block_dev: use bio_release_pages in blkdev_bio_end_io
  iomap: use bio_release_pages in iomap_dio_bio_end_io
  block: use bio_release_pages in bio_map_user_iov
  block: use bio_release_pages in bio_unmap_user
  block: optionally mark pages dirty in bio_release_pages
  block: move the BIO_NO_PAGE_REF check into bio_release_pages
  block: skd_main.c: Remove call to memset after dma_alloc_coherent
  block: mtip32xx: Remove call to memset after dma_alloc_coherent
  ...

1 files changed, 43 insertions, 21 deletions

diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt
index 83b457e24bba..b40b5b7cebd9 100644
--- a/Documentation/block/queue-sysfs.txt
+++ b/Documentation/block/queue-sysfs.txt
@@ -14,6 +14,15 @@ add_random (RW)
 This file allows to turn off the disk entropy contribution. Default
 value of this file is '1'(on).
 
+chunk_sectors (RO)
+------------------
+This has different meaning depending on the type of the block device.
+For a RAID device (dm-raid), chunk_sectors indicates the size in 512B sectors
+of the RAID volume stripe segment. For a zoned block device, either host-aware
+or host-managed, chunk_sectors indicates the size in 512B sectors of the zones
+of the device, with the eventual exception of the last zone of the device which
+may be smaller.
+
 dax (RO)
 --------
 This file indicates whether the device supports Direct Access (DAX),
@@ -43,6 +52,16 @@ large discards are issued, setting this value lower will make Linux issue
 smaller discards and potentially help reduce latencies induced by large
 discard operations.
 
+discard_zeroes_data (RO)
+------------------------
+Obsolete. Always zero.
+
+fua (RO)
+--------
+Whether or not the block driver supports the FUA flag for write requests.
+FUA stands for Force Unit Access. If the FUA flag is set that means that
+write requests must bypass the volatile cache of the storage device.
+
 hw_sector_size (RO)
 -------------------
 This is the hardware sector size of the device, in bytes.
@@ -83,14 +102,19 @@ logical_block_size (RO)
 -----------------------
 This is the logical block size of the device, in bytes.
 
+max_discard_segments (RO)
+-------------------------
+The maximum number of DMA scatter/gather entries in a discard request.
+
 max_hw_sectors_kb (RO)
 ----------------------
 This is the maximum number of kilobytes supported in a single data transfer.
 
 max_integrity_segments (RO)
 ---------------------------
-When read, this file shows the max limit of integrity segments as
-set by block layer which a hardware controller can handle.
+Maximum number of elements in a DMA scatter/gather list with integrity
+data that will be submitted by the block layer core to the associated
+block driver.
 
 max_sectors_kb (RW)
 -------------------
@@ -100,11 +124,12 @@ size allowed by the hardware.
 
 max_segments (RO)
 -----------------
-Maximum number of segments of the device.
+Maximum number of elements in a DMA scatter/gather list that is submitted
+to the associated block driver.
 
 max_segment_size (RO)
 ---------------------
-Maximum segment size of the device.
+Maximum size in bytes of a single element in a DMA scatter/gather list.
 
 minimum_io_size (RO)
 --------------------
@@ -132,6 +157,12 @@ per-block-cgroup request pool.  IOW, if there are N block cgroups,
 each request queue may have up to N request pools, each independently
 regulated by nr_requests.
 
+nr_zones (RO)
+-------------
+For zoned block devices (zoned attribute indicating "host-managed" or
+"host-aware"), this indicates the total number of zones of the device.
+This is always 0 for regular block devices.
+
 optimal_io_size (RO)
 --------------------
 This is the optimal IO size reported by the device.
@@ -185,8 +216,8 @@ This is the number of bytes the device can write in a single write-same
 command.  A value of '0' means write-same is not supported by this
 device.
 
-wb_lat_usec (RW)
-----------------
+wbt_lat_usec (RW)
+-----------------
 If the device is registered for writeback throttling, then this file shows
 the target minimum read latency. If this latency is exceeded in a given
 window of time (see wb_window_usec), then the writeback throttling will start
@@ -201,6 +232,12 @@ blk-throttle makes decision based on the samplings. Lower time means cgroups
 have more smooth throughput, but higher CPU overhead. This exists only when
 CONFIG_BLK_DEV_THROTTLING_LOW is enabled.
 
+write_zeroes_max_bytes (RO)
+---------------------------
+For block drivers that support REQ_OP_WRITE_ZEROES, the maximum number of
+bytes that can be zeroed at once. The value 0 means that REQ_OP_WRITE_ZEROES
+is not supported.
+
 zoned (RO)
 ----------
 This indicates if the device is a zoned block device and the zone model of the
@@ -213,19 +250,4 @@ devices are described in the ZBC (Zoned Block Commands) and ZAC
 do not support zone commands, they will be treated as regular block devices
 and zoned will report "none".
 
-nr_zones (RO)
--------------
-For zoned block devices (zoned attribute indicating "host-managed" or
-"host-aware"), this indicates the total number of zones of the device.
-This is always 0 for regular block devices.
-
-chunk_sectors (RO)
-------------------
-This has different meaning depending on the type of the block device.
-For a RAID device (dm-raid), chunk_sectors indicates the size in 512B sectors
-of the RAID volume stripe segment. For a zoned block device, either host-aware
-or host-managed, chunk_sectors indicates the size in 512B sectors of the zones
-of the device, with the eventual exception of the last zone of the device which
-may be smaller.
-
 Jens Axboe <jens.axboe@oracle.com>, February 2009