Merge tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Olof Johansson:
 "Like always, the DT branch is sizable. There are numerous additions
  and fixes to existing platforms, but also a handful of new ones
  introduced. Less than some other releases, but there's been
  significant work on cleanups, refactorings and device enabling on
  existing platforms.

  A non-exhaustive list of new material:

   - Refactoring of BCM2711 dtsi structure to add support for the
     Raspberry Pi 400

   - Rockchip: RK3568 SoC and EVB, video codecs for
     rk3036/3066/3188/322x

   - Qualcomm: SA8155p Automotive platform (SM8150 derivative),
     SM8150/8250 enhancements and support for Sony Xperia 1/1II and
     5/5II

   - TI K3: PCI/USB3 support on AM64-sk boards, R5 remoteproc
     definitions

   - TI OMAP: Various cleanups

   - Tegra: Audio support for Jetson Xavier NX, SMMU support on Tegra194

   - Qualcomm: lots of additions for peripherals across several SoCs,
     and new support for Microsoft Surface Duo (SM8150-based), Huawei
     Ascend G7.

   - i.MX: Numerous additions of features across SoCs and boards.

   - Allwinner: More device bindings for V3s, Forlinx OKA40i-C and
     NanoPi R1S H5 boards

   - MediaTek: More device bindings for mt8167, new Chromebook system
     variants for mt8183

   - Renesas: RZ/G2L SoC and EVK added

   - Amlogic: BananaPi BPI-M5 board added"

* tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (511 commits)
  arm64: dts: rockchip: add basic dts for RK3568 EVB
  arm64: dts: rockchip: add core dtsi for RK3568 SoC
  arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs
  ARM: dts: rockchip: add vpu and vdec node for RK322x
  ARM: dts: rockchip: add vpu nodes for RK3066 and RK3188
  ARM: dts: rockchip: add vpu node for RK3036
  arm64: dts: ipq8074: Add QUP6 I2C node
  arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
  arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
  arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc
  arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly
  arm64: dts: rockchip: Sort rk3399 firefly pinmux entries
  arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly
  arm64: dts: rockchip: add SPDIF node for rk3399-firefly
  arm64: dts: rockchip: Add Rotation Property for OGA Panel
  arm64: dts: qcom: sc7180: bus votes for eMMC and SD card
  arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen
  arm64: dts: qcom: sm8250-edo: Enable GPI DMA
  arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI
  arm64: dts: qcom: sm8250-edo: Enable PCIe
  ...

1 files changed, 0 insertions, 63 deletions

diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
deleted file mode 100644
index 9acea9d93160..000000000000
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-NVIDIA Tegra114 Clock And Reset Controller
-
-This binding uses the common clock binding:
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
-for muxing and gating Tegra's clocks, and setting their rates.
-
-Required properties :
-- compatible : Should be "nvidia,tegra114-car"
-- reg : Should contain CAR registers location and length
-- clocks : Should contain phandle and clock specifiers for two clocks:
-  the 32 KHz "32k_in", and the board-specific oscillator "osc".
-- #clock-cells : Should be 1.
-  In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra114-car.h>.
-- #reset-cells : Should be 1.
-  In clock consumers, this cell represents the bit number in the CAR's
-  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
-
-Example SoC include file:
-
-/ {
-	tegra_car: clock {
-		compatible = "nvidia,tegra114-car";
-		reg = <0x60006000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	usb@c5004000 {
-		clocks = <&tegra_car TEGRA114_CLK_USB2>;
-	};
-};
-
-Example board file:
-
-/ {
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <12000000>;
-		};
-
-		clk_32k: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	&tegra_car {
-		clocks = <&clk_32k> <&osc>;
-	};
-};