Merge branch 'drm-etnaviv-next' of git://git.pengutronix.de/git/lst/linux into drm-next

here is the pull request for the etnaviv DRM driver. It includes the DT bindings
and the driver itself, platform devicetree changes will be merged through the
respective SoC trees. Otherwise it's just a squashed version of the V2 patches
that have been on the list for a while.

* 'drm-etnaviv-next' of git://git.pengutronix.de/git/lst/linux:
  MAINTAINERS: add maintainer and reviewers for the etnaviv DRM driver
  drm/etnaviv: add initial etnaviv DRM driver
  drm/etnaviv: add devicetree bindings
  devicetree: add vendor prefix for Vivante Corporation

1 files changed, 54 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
new file mode 100644
index 000000000000..ed5e0a7894ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
@@ -0,0 +1,54 @@
+Etnaviv DRM master device
+=========================
+
+The Etnaviv DRM master device is a virtual device needed to list all
+Vivante GPU cores that comprise the GPU subsystem.
+
+Required properties:
+- compatible: Should be one of
+    "fsl,imx-gpu-subsystem"
+    "marvell,dove-gpu-subsystem"
+- cores: Should contain a list of phandles pointing to Vivante GPU devices
+
+example:
+
+gpu-subsystem {
+	compatible = "fsl,imx-gpu-subsystem";
+	cores = <&gpu_2d>, <&gpu_3d>;
+};
+
+
+Vivante GPU core devices
+========================
+
+Required properties:
+- compatible: Should be "vivante,gc"
+  A more specific compatible is not needed, as the cores contain chip
+  identification registers at fixed locations, which provide all the
+  necessary information to the driver.
+- reg: should be register base and length as documented in the
+  datasheet
+- interrupts: Should contain the cores interrupt line
+- clocks: should contain one clock for entry in clock-names
+  see Documentation/devicetree/bindings/clock/clock-bindings.txt
+- clock-names:
+   - "bus":    AXI/register clock
+   - "core":   GPU core clock
+   - "shader": Shader clock (only required if GPU has feature PIPE_3D)
+
+Optional properties:
+- power-domains: a power domain consumer specifier according to
+  Documentation/devicetree/bindings/power/power_domain.txt
+
+example:
+
+gpu_3d: gpu@00130000 {
+	compatible = "vivante,gc";
+	reg = <0x00130000 0x4000>;
+	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+	         <&clks IMX6QDL_CLK_GPU3D_CORE>,
+	         <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+	clock-names = "bus", "core", "shader";
+	power-domains = <&gpc 1>;
+};