summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iio
diff options
context:
space:
mode:
authorHans de Goede <hdegoede@redhat.com>2015-09-12 12:52:49 +0200
committerRob Herring <robh@kernel.org>2015-09-17 14:36:37 -0500
commit31b47ae3f18b31d86f553198e624b3b38f6397a2 (patch)
tree8008dfdc8c58da9bf890641f1d79757c712b87a9 /Documentation/devicetree/bindings/iio
parent9fa04fbeb78eab6f3817e444644348c46c7e2370 (diff)
devicetree: bindings: Extend the bma180 bindings with bma250 info
The bma180 / bma250 accelerometers share a driver (at least under Linux), so it makes sense to also have their bindings info in a single .txt. This commit extends the bma180 bindings with bma250 bindings, specifically it specifies how the 2 seperate interrupts the bma250 has must be listed in devicetree. The existing bma180 driver is already fully compatible with the specified bindings. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rob Herring <robh@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/iio')
-rw-r--r--Documentation/devicetree/bindings/iio/accel/bma180.txt8
1 files changed, 6 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
index c5933573e0f6..4a3679d54457 100644
--- a/Documentation/devicetree/bindings/iio/accel/bma180.txt
+++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt
@@ -1,10 +1,11 @@
-* Bosch BMA180 triaxial acceleration sensor
+* Bosch BMA180 / BMA250 triaxial acceleration sensor
http://omapworld.com/BMA180_111_1002839.pdf
+http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
Required properties:
- - compatible : should be "bosch,bma180"
+ - compatible : should be "bosch,bma180" or "bosch,bma250"
- reg : the I2C address of the sensor
Optional properties:
@@ -13,6 +14,9 @@ Optional properties:
- interrupts : interrupt mapping for GPIO IRQ, it should by configured with
flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING
+ For the bma250 the first interrupt listed must be the one
+ connected to the INT1 pin, the second (optional) interrupt
+ listed must be the one connected to the INT2 pin.
Example: