Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a new driver for the Azoteq IQS269A capacitive touch controller

 - a new driver for the Cypress CY8CTMA140 touchscreen

 - updates to Elan and ft5x06 touchscreen drivers

 - assorted driver fixes

 - msm-vibrator has been removed as we have a more generic solution

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits)
  Input: adi - work around module name confict
  Input: iqs269a - add missing I2C dependency
  Input: elants - refactor elants_i2c_execute_command()
  Input: elants - override touchscreen info with DT properties
  Input: elants - remove unused axes
  Input: add support for Azoteq IQS269A
  dt-bindings: input: Add bindings for Azoteq IQS269A
  Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups
  Input: remove msm-vibrator driver
  dt-bindings: Input: remove msm-vibrator
  Input: elants_i2c - provide an attribute to show calibration count
  Input: introduce input_mt_report_slot_inactive()
  dt-bindings: input: touchscreen: elants_i2c: convert to YAML
  Input: add driver for the Cypress CY8CTMA140 touchscreen
  dt-bindings: touchscreen: Add CY8CTMA140 bindings
  Input: edt-ft5x06 - prefer asynchronous probe
  Input: edt-ft5x06 - improve power management operations
  Input: edt-ft5x06 - move parameter restore into helper
  Input: edt-ft5x06 - fix get_default register write access
  Input: atkbd - receive and use physcode->keycode mapping from FW
  ...

1 files changed, 0 insertions, 36 deletions

diff --git a/Documentation/devicetree/bindings/input/msm-vibrator.txt b/Documentation/devicetree/bindings/input/msm-vibrator.txt
deleted file mode 100644
index 8dcf014ef2e5..000000000000
--- a/Documentation/devicetree/bindings/input/msm-vibrator.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Device tree bindings for the Qualcomm MSM vibrator
-
-Required properties:
-
-  - compatible: Should be one of
-		"qcom,msm8226-vibrator"
-		"qcom,msm8974-vibrator"
-  - reg: the base address and length of the IO memory for the registers.
-  - pinctrl-names: set to default.
-  - pinctrl-0: phandles pointing to pin configuration nodes. See
-               Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-  - clock-names: set to pwm
-  - clocks: phandle of the clock. See
-            Documentation/devicetree/bindings/clock/clock-bindings.txt
-  - enable-gpios: GPIO that enables the vibrator.
-
-Optional properties:
-
-  - vcc-supply: phandle to the regulator that provides power to the sensor.
-
-Example from a LG Nexus 5 (hammerhead) phone:
-
-vibrator@fd8c3450 {
-	reg = <0xfd8c3450 0x400>;
-	compatible = "qcom,msm8974-vibrator";
-
-	vcc-supply = <&pm8941_l19>;
-
-	clocks = <&mmcc CAMSS_GP1_CLK>;
-	clock-names = "pwm";
-
-	enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&vibrator_pin>;
-};