Merge tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM driver updates from Olof Johansson:

 - Reset controllers: Adding support for Microchip Sparx5 Switch.

 - Memory controllers: ARM Primecell PL35x SMC memory controller driver
   cleanups and improvements.

 - i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.

 - Rockchip: RK3568 power domains support + DT binding updates,
   cleanups.

 - Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
   including support for MSM8226, MDM9607, SM6125 and SC8180X.

 - ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
   interfaces and communication (including bus model) between partitions
   both in Normal and Secure Worlds.

 - Tegra Memory controller changes, including major rework to deal with
   identity mappings at boot and integration with ARM SMMU pieces.

* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
  firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
  firmware: turris-mox-rwtm: show message about HWRNG registration
  firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
  firmware: turris-mox-rwtm: report failures better
  firmware: turris-mox-rwtm: fix reply status decoding function
  soc: imx: gpcv2: add support for i.MX8MN power domains
  dt-bindings: add defines for i.MX8MN power domains
  firmware: tegra: bpmp: Fix Tegra234-only builds
  iommu/arm-smmu: Use Tegra implementation on Tegra186
  iommu/arm-smmu: tegra: Implement SID override programming
  iommu/arm-smmu: tegra: Detect number of instances at runtime
  dt-bindings: arm-smmu: Add Tegra186 compatible string
  firmware: qcom_scm: Add MDM9607 compatible
  soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
  soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
  soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
  dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
  memory: emif: remove unused frequency and voltage notifiers
  memory: fsl_ifc: fix leak of private memory on probe failure
  memory: fsl_ifc: fix leak of IO mapping on probe failure
  ...

1 files changed, 0 insertions, 136 deletions

diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
deleted file mode 100644
index 8304eceb62e4..000000000000
--- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
+++ /dev/null
@@ -1,136 +0,0 @@
-* Rockchip Power Domains
-
-Rockchip processors include support for multiple power domains which can be
-powered up/down by software based on different application scenes to save power.
-
-Required properties for power domain controller:
-- compatible: Should be one of the following.
-	"rockchip,px30-power-controller" - for PX30 SoCs.
-	"rockchip,rk3036-power-controller" - for RK3036 SoCs.
-	"rockchip,rk3066-power-controller" - for RK3066 SoCs.
-	"rockchip,rk3128-power-controller" - for RK3128 SoCs.
-	"rockchip,rk3188-power-controller" - for RK3188 SoCs.
-	"rockchip,rk3228-power-controller" - for RK3228 SoCs.
-	"rockchip,rk3288-power-controller" - for RK3288 SoCs.
-	"rockchip,rk3328-power-controller" - for RK3328 SoCs.
-	"rockchip,rk3366-power-controller" - for RK3366 SoCs.
-	"rockchip,rk3368-power-controller" - for RK3368 SoCs.
-	"rockchip,rk3399-power-controller" - for RK3399 SoCs.
-- #power-domain-cells: Number of cells in a power-domain specifier.
-	Should be 1 for multiple PM domains.
-- #address-cells: Should be 1.
-- #size-cells: Should be 0.
-
-Required properties for power domain sub nodes:
-- reg: index of the power domain, should use macros in:
-	"include/dt-bindings/power/px30-power.h" - for PX30 type power domain.
-	"include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
-	"include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain.
-	"include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain.
-	"include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain.
-	"include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain.
-	"include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
-	"include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
-	"include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
-	"include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
-	"include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain.
-- clocks (optional): phandles to clocks which need to be enabled while power domain
-	switches state.
-- pm_qos (optional): phandles to qos blocks which need to be saved and restored
-	while power domain switches state.
-
-Qos Example:
-
-	qos_gpu: qos_gpu@ffaf0000 {
-		compatible ="syscon";
-		reg = <0x0 0xffaf0000 0x0 0x20>;
-	};
-
-Example:
-
-	power: power-controller {
-		compatible = "rockchip,rk3288-power-controller";
-		#power-domain-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pd_gpu {
-			reg = <RK3288_PD_GPU>;
-			clocks = <&cru ACLK_GPU>;
-			pm_qos = <&qos_gpu>;
-		};
-	};
-
-	 power: power-controller {
-                compatible = "rockchip,rk3368-power-controller";
-                #power-domain-cells = <1>;
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                pd_gpu_1 {
-                        reg = <RK3368_PD_GPU_1>;
-                        clocks = <&cru ACLK_GPU_CFG>;
-                };
-        };
-
-Example 2:
-		power: power-controller {
-			compatible = "rockchip,rk3399-power-controller";
-			#power-domain-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pd_vio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <RK3399_PD_VIO>;
-
-				pd_vo {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <RK3399_PD_VO>;
-
-					pd_vopb {
-						reg = <RK3399_PD_VOPB>;
-					};
-
-					pd_vopl {
-						reg = <RK3399_PD_VOPL>;
-					};
-				};
-			};
-		};
-
-Node of a device using power domains must have a power-domains property,
-containing a phandle to the power device node and an index specifying which
-power domain to use.
-The index should use macros in:
-	"include/dt-bindings/power/px30-power.h" - for px30 type power domain.
-	"include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain.
-	"include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain.
-	"include/dt-bindings/power/rk3128-power.h" - for rk3228 type power domain.
-	"include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
-	"include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
-	"include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
-	"include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain.
-	"include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain.
-
-Example of the node using power domain:
-
-	node {
-		/* ... */
-		power-domains = <&power RK3288_PD_GPU>;
-		/* ... */
-	};
-
-	node {
-                /* ... */
-                power-domains = <&power RK3368_PD_GPU_1>;
-                /* ... */
-        };
-
-	node {
-		/* ... */
-		power-domains = <&power RK3399_PD_VOPB>;
-		/* ... */
-	};