diff options
author | Maarten Lankhorst <maarten.lankhorst@linux.intel.com> | 2021-07-27 12:48:17 +0200 |
---|---|---|
committer | Maarten Lankhorst <maarten.lankhorst@linux.intel.com> | 2021-07-27 12:48:17 +0200 |
commit | ca31fef11dc83e672415d5925a134749761329bd (patch) | |
tree | 8eb6a489e2d6dd117300f40ed8fc945a06bb6eee /Documentation/devicetree/bindings/spi | |
parent | ba6cd766e0bf933611dc66fcb86f72ac80a446bc (diff) | |
parent | 15d27b15de965043d6f8e23bc7f34386fcd1a772 (diff) |
Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next
Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Diffstat (limited to 'Documentation/devicetree/bindings/spi')
14 files changed, 204 insertions, 112 deletions
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml index e3fb553d9180..4d46c49ec32b 100644 --- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml +++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml @@ -35,7 +35,6 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: controller register bus clock - description: baud rate generator and delay control clock diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml index 6ee19d49fd3c..ec5873919170 100644 --- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml @@ -56,7 +56,6 @@ properties: reg-names: minItems: 1 - maxItems: 5 items: - const: mspi - const: bspi @@ -71,7 +70,6 @@ properties: interrupt-names: oneOf: - minItems: 1 - maxItems: 7 items: - const: mspi_done - const: mspi_halted diff --git a/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt b/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt deleted file mode 100644 index fb1a6728638d..000000000000 --- a/Documentation/devicetree/bindings/spi/renesas,rzn1-spi.txt +++ /dev/null @@ -1,11 +0,0 @@ -Renesas RZ/N1 SPI Controller - -This controller is based on the Synopsys DW Synchronous Serial Interface and -inherits all properties defined in snps,dw-apb-ssi.txt except for the -compatible property. - -Required properties: -- compatible : The device specific string followed by the generic RZ/N1 string. - Therefore it must be one of: - "renesas,r9a06g032-spi", "renesas,rzn1-spi" - "renesas,r9a06g033-spi", "renesas,rzn1-spi" diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index 4825157cd92e..ca91201a9926 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -67,6 +67,12 @@ properties: const: baikal,bt1-sys-ssi - description: Canaan Kendryte K210 SoS SPI Controller const: canaan,k210-spi + - description: Renesas RZ/N1 SPI Controller + items: + - enum: + - renesas,r9a06g032-spi # RZ/N1D + - renesas,r9a06g033-spi # RZ/N1S + - const: renesas,rzn1-spi # RZ/N1 reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.txt b/Documentation/devicetree/bindings/spi/spi-cadence.txt deleted file mode 100644 index 05a2ef945664..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-cadence.txt +++ /dev/null @@ -1,30 +0,0 @@ -Cadence SPI controller Device Tree Bindings -------------------------------------------- - -Required properties: -- compatible : Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6". -- reg : Physical base address and size of SPI registers map. -- interrupts : Property with a value describing the interrupt - number. -- clock-names : List of input clock names - "ref_clk", "pclk" - (See clock bindings for details). -- clocks : Clock phandles (see clock bindings for details). - -Optional properties: -- num-cs : Number of chip selects used. - If a decoder is used, this will be the number of - chip selects after the decoder. -- is-decoded-cs : Flag to indicate whether decoder is used or not. - -Example: - - spi@e0007000 { - compatible = "xlnx,zynq-spi-r1p6"; - clock-names = "ref_clk", "pclk"; - clocks = <&clkc 26>, <&clkc 35>; - interrupt-parent = <&intc>; - interrupts = <0 49 4>; - num-cs = <4>; - is-decoded-cs = <0>; - reg = <0xe0007000 0x1000>; - } ; diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml new file mode 100644 index 000000000000..9787be21318e --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-cadence.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence SPI controller Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + enum: + - cdns,spi-r1p6 + - xlnx,zynq-spi-r1p6 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: ref_clk + - const: pclk + + clocks: + maxItems: 2 + + num-cs: + description: | + Number of chip selects used. If a decoder is used, + this will be the number of chip selects after the + decoder. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 4 + default: 4 + + is-decoded-cs: + description: | + Flag to indicate whether decoder is used or not. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + default: 0 + +unevaluatedProperties: false + +examples: + - | + spi@e0007000 { + compatible = "xlnx,zynq-spi-r1p6"; + clock-names = "ref_clk", "pclk"; + clocks = <&clkc 26>, <&clkc 35>; + interrupt-parent = <&intc>; + interrupts = <0 49 4>; + num-cs = <4>; + is-decoded-cs = <0>; + reg = <0xe0007000 0x1000>; + }; +... diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 0477396e4945..8246891602e7 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -79,22 +79,7 @@ properties: description: The SPI controller acts as a slave, instead of a master. -allOf: - - if: - not: - required: - - spi-slave - then: - properties: - "#address-cells": - const: 1 - else: - properties: - "#address-cells": - const: 0 - -patternProperties: - "^slave$": + slave: type: object properties: @@ -105,6 +90,7 @@ patternProperties: required: - compatible +patternProperties: "^.*@[0-9a-f]+$": type: object @@ -114,8 +100,11 @@ patternProperties: Compatible of the SPI device. reg: - minimum: 0 - maximum: 256 + minItems: 1 + maxItems: 256 + items: + minimum: 0 + maximum: 256 description: Chip select used by the device. @@ -177,6 +166,20 @@ patternProperties: - compatible - reg +allOf: + - if: + not: + required: + - spi-slave + then: + properties: + "#address-cells": + const: 1 + else: + properties: + "#address-cells": + const: 0 + additionalProperties: true examples: diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt index e2198a389484..200c7fc7b089 100644 --- a/Documentation/devicetree/bindings/spi/spi-davinci.txt +++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt @@ -25,7 +25,7 @@ Required properties: - interrupts: interrupt number mapped to CPU. - clocks: spi clk phandle For 66AK2G this property should be set per binding, - Documentation/devicetree/bindings/clock/ti,sci-clk.txt + Documentation/devicetree/bindings/clock/ti,sci-clk.yaml SoC-specific Required Properties: diff --git a/Documentation/devicetree/bindings/spi/spi-mux.yaml b/Documentation/devicetree/bindings/spi/spi-mux.yaml index d09c6355e22d..51c7622dc20b 100644 --- a/Documentation/devicetree/bindings/spi/spi-mux.yaml +++ b/Documentation/devicetree/bindings/spi/spi-mux.yaml @@ -72,7 +72,7 @@ examples: mux-controls = <&mux>; - spi-flash@0 { + flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml index 1e6cf29e6388..7f987e79337c 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.yaml +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.yaml @@ -33,6 +33,7 @@ properties: - rockchip,rk3328-spi - rockchip,rk3368-spi - rockchip,rk3399-spi + - rockchip,rv1126-spi - const: rockchip,rk3066-spi reg: diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.txt b/Documentation/devicetree/bindings/spi/spi-xilinx.txt deleted file mode 100644 index 5f4ed3e5c994..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-xilinx.txt +++ /dev/null @@ -1,23 +0,0 @@ -Xilinx SPI controller Device Tree Bindings -------------------------------------------------- - -Required properties: -- compatible : Should be "xlnx,xps-spi-2.00.a", "xlnx,xps-spi-2.00.b" or "xlnx,axi-quad-spi-1.00.a" -- reg : Physical base address and size of SPI registers map. -- interrupts : Property with a value describing the interrupt - number. - -Optional properties: -- xlnx,num-ss-bits : Number of chip selects used. -- xlnx,num-transfer-bits : Number of bits per transfer. This will be 8 if not specified - -Example: - axi_quad_spi@41e00000 { - compatible = "xlnx,xps-spi-2.00.a"; - interrupt-parent = <&intc>; - interrupts = <0 31 1>; - reg = <0x41e00000 0x10000>; - xlnx,num-ss-bits = <0x1>; - xlnx,num-transfer-bits = <32>; - }; - diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml new file mode 100644 index 000000000000..593f7693bace --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-xilinx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx SPI controller Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + enum: + - xlnx,xps-spi-2.00.a + - xlnx,xps-spi-2.00.b + - xlnx,axi-quad-spi-1.00.a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + xlnx,num-ss-bits: + description: Number of chip selects used. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + + xlnx,num-transfer-bits: + description: Number of bits per transfer. This will be 8 if not specified. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16, 32] + default: 8 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + spi0: spi@41e00000 { + compatible = "xlnx,xps-spi-2.00.a"; + interrupt-parent = <&intc>; + interrupts = <0 31 1>; + reg = <0x41e00000 0x10000>; + xlnx,num-ss-bits = <0x1>; + xlnx,num-transfer-bits = <32>; + }; +... diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt deleted file mode 100644 index 0f6d37ff541c..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt +++ /dev/null @@ -1,25 +0,0 @@ -Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings -------------------------------------------------------------------- - -Required properties: -- compatible : Should be "xlnx,zynqmp-qspi-1.0". -- reg : Physical base address and size of GQSPI registers map. -- interrupts : Property with a value describing the interrupt - number. -- clock-names : List of input clock names - "ref_clk", "pclk" - (See clock bindings for details). -- clocks : Clock phandles (see clock bindings for details). - -Optional properties: -- num-cs : Number of chip selects used. - -Example: - qspi: spi@ff0f0000 { - compatible = "xlnx,zynqmp-qspi-1.0"; - clock-names = "ref_clk", "pclk"; - clocks = <&misc_clk &misc_clk>; - interrupts = <0 15 4>; - interrupt-parent = <&gic>; - num-cs = <1>; - reg = <0x0 0xff0f0000 0x1000>,<0x0 0xc0000000 0x8000000>; - }; diff --git a/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml new file mode 100644 index 000000000000..ea72c8001256 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-zynqmp-qspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings + +maintainers: + - Michal Simek <michal.simek@xilinx.com> + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + const: xlnx,zynqmp-qspi-1.0 + + reg: + maxItems: 2 + + interrupts: + maxItems: 1 + + clock-names: + items: + - const: ref_clk + - const: pclk + + clocks: + maxItems: 2 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/xlnx-zynqmp-clk.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + qspi: spi@ff0f0000 { + compatible = "xlnx,zynqmp-qspi-1.0"; + clocks = <&zynqmp_clk QSPI_REF>, <&zynqmp_clk LPD_LSBUS>; + clock-names = "ref_clk", "pclk"; + interrupts = <0 15 4>; + interrupt-parent = <&gic>; + reg = <0x0 0xff0f0000 0x0 0x1000>, + <0x0 0xc0000000 0x0 0x8000000>; + }; + }; |