Merge tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID fixes from Benjamin Tissoires:

 - fix potential read out of bounds in hid-asus (Andrew Ballance)

 - fix endian-conversion on little endian systems in intel-ish-hid (Arnd
   Bergmann)

 - A couple of new input event codes (Aseda Aboagye)

 - errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
   (Christophe JAILLET), hid-logitech-dj (José Expósito)

 - current leakage fix while the device is in suspend on a i2c-hid
   laptop (Johan Hovold)

 - other assorted smaller fixes and device ID / quirk entry additions

* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for ELAN touchscreens 2F2C and 4116
  HID: i2c-hid: elan: fix reset suspend current leakage
  dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
  dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
  dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
  input: Add support for "Do Not Disturb"
  input: Add event code for accessibility key
  hid: asus: asus_report_fixup: fix potential read out of bounds
  HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
  HID: intel-ish-hid: fix endian-conversion
  HID: nintendo: Fix an error handling path in nintendo_hid_probe()
  HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
  HID: core: remove unnecessary WARN_ON() in implement()
  HID: nvidia-shield: Add missing check for input_ff_create_memless
  HID: intel-ish-hid: Fix build error for COMPILE_TEST

2 files changed, 80 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
index dc4ac41f2441..a62916d07a08 100644
--- a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
+++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
@@ -18,9 +18,12 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - elan,ekth6915
-      - ilitek,ili2901
+    oneOf:
+      - items:
+          - enum:
+              - elan,ekth5015m
+          - const: elan,ekth6915
+      - const: elan,ekth6915
 
   reg:
     const: 0x10
@@ -33,6 +36,12 @@ properties:
   reset-gpios:
     description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
 
+  no-reset-on-power-off:
+    type: boolean
+    description:
+      Reset line is wired so that it can (and should) be left deasserted when
+      the power supply is off.
+
   vcc33-supply:
     description: The 3.3V supply to the touchscreen.
 
@@ -58,8 +67,8 @@ examples:
       #address-cells = <1>;
       #size-cells = <0>;
 
-      ap_ts: touchscreen@10 {
-        compatible = "elan,ekth6915";
+      touchscreen@10 {
+        compatible = "elan,ekth5015m", "elan,ekth6915";
         reg = <0x10>;
 
         interrupt-parent = <&tlmm>;
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml b/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml
new file mode 100644
index 000000000000..1abeec768d79
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ilitek,ili2901.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI2901 touchscreen controller
+
+maintainers:
+  - Jiri Kosina <jkosina@suse.com>
+
+description:
+  Supports the Ilitek ILI2901 touchscreen controller.
+  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ilitek,ili2901
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  panel: true
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc33-supply: true
+
+  vccio-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vcc33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@41 {
+        compatible = "ilitek,ili2901";
+        reg = <0x41>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+        vcc33-supply = <&pp3300_ts>;
+      };
+    };