summaryrefslogtreecommitdiff
path: root/Documentation/kbuild/modules.txt
diff options
context:
space:
mode:
authorSam Ravnborg <sam@mars.ravnborg.org>2006-01-28 22:15:55 +0100
committerSam Ravnborg <sam@mars.ravnborg.org>2006-02-19 09:51:18 +0100
commit040fcc819a2e7783a570f4bdcdd1f2a7f5f06837 (patch)
tree58a6cb2e7394c589c8ef49b308512c83af0c7087 /Documentation/kbuild/modules.txt
parent5c3ead8c72788d36d34c9f1689fb529d1339b405 (diff)
kbuild: improved modversioning support for external modules
With following patch a second option is enabled to obtain symbol information from a second external module when a external module is build. The recommended approach is to use a common kbuild file but that may be impractical in certain cases. With this patch one can copy over a Module.symvers from one external module to make symbols (and symbol versions) available for another external module. Updated documentation in Documentation/kbuild/modules.txt Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Diffstat (limited to 'Documentation/kbuild/modules.txt')
-rw-r--r--Documentation/kbuild/modules.txt87
1 files changed, 80 insertions, 7 deletions
diff --git a/Documentation/kbuild/modules.txt b/Documentation/kbuild/modules.txt
index 87d858df4e34..fcccf2432f98 100644
--- a/Documentation/kbuild/modules.txt
+++ b/Documentation/kbuild/modules.txt
@@ -23,7 +23,10 @@ In this document you will find information about:
=== 6. Module installation
--- 6.1 INSTALL_MOD_PATH
--- 6.2 INSTALL_MOD_DIR
- === 7. Module versioning
+ === 7. Module versioning & Module.symvers
+ --- 7.1 Symbols fron the kernel (vmlinux + modules)
+ --- 7.2 Symbols and external modules
+ --- 7.3 Symbols from another external module
=== 8. Tips & Tricks
--- 8.1 Testing for CONFIG_FOO_BAR
@@ -89,7 +92,8 @@ when building an external module.
make -C $KDIR M=$PWD modules_install
Install the external module(s).
Installation default is in /lib/modules/<kernel-version>/extra,
- but may be prefixed with INSTALL_MOD_PATH - see separate chapter.
+ but may be prefixed with INSTALL_MOD_PATH - see separate
+ chapter.
make -C $KDIR M=$PWD clean
Remove all generated files for the module - the kernel
@@ -433,7 +437,7 @@ External modules are installed in the directory:
=> Install dir: /lib/modules/$(KERNELRELEASE)/gandalf
-=== 7. Module versioning
+=== 7. Module versioning & Module.symvers
Module versioning is enabled by the CONFIG_MODVERSIONS tag.
@@ -443,11 +447,80 @@ when a module is loaded/used then the CRC values contained in the kernel are
compared with similar values in the module. If they are not equal then the
kernel refuses to load the module.
-During a kernel build a file named Module.symvers will be generated. This
-file includes the symbol version of all symbols within the kernel. If the
-Module.symvers file is saved from the last full kernel compile one does not
-have to do a full kernel compile to build a module version's compatible module.
+Module.symvers contains a list of all exported symbols from a kernel build.
+--- 7.1 Symbols fron the kernel (vmlinux + modules)
+
+ During a kernel build a file named Module.symvers will be generated.
+ Module.symvers contains all exported symbols from the kernel and
+ compiled modules. For each symbols the corresponding CRC value
+ is stored too.
+
+ The syntax of the Module.symvers file is:
+ <CRC> <Symbol> <module>
+ Sample:
+ 0x2d036834 scsi_remove_host drivers/scsi/scsi_mod
+
+ For a kernel build without CONFIG_MODVERSIONING enabled the crc
+ would read: 0x00000000
+
+ Module.symvers serve two purposes.
+ 1) It list all exported symbols both from vmlinux and all modules
+ 2) It list CRC if CONFIG_MODVERSION is enabled
+
+--- 7.2 Symbols and external modules
+
+ When building an external module the build system needs access to
+ the symbols from the kernel to check if all external symbols are
+ defined. This is done in the MODPOST step and to obtain all
+ symbols modpost reads Module.symvers from the kernel.
+ If a Module.symvers file is present in the directory where
+ the external module is being build this file will be read too.
+ During the MODPOST step a new Module.symvers file will be written
+ containing all exported symbols that was not defined in the kernel.
+
+--- 7.3 Symbols from another external module
+
+ Sometimes one external module uses exported symbols from another
+ external module. Kbuild needs to have full knowledge on all symbols
+ to avoid spitting out warnings about undefined symbols.
+ Two solutions exist to let kbuild know all symbols of more than
+ one external module.
+ The method with a top-level kbuild file is recommended but may be
+ impractical in certain situations.
+
+ Use a top-level Kbuild file
+ If you have two modules: 'foo', 'bar' and 'foo' needs symbols
+ from 'bar' then one can use a common top-level kbuild file so
+ both modules are compiled in same build.
+
+ Consider following directory layout:
+ ./foo/ <= contains the foo module
+ ./bar/ <= contains the bar module
+ The top-level Kbuild file would then look like:
+
+ #./Kbuild: (this file may also be named Makefile)
+ obj-y := foo/ bar/
+
+ Executing:
+ make -C $KDIR M=`pwd`
+
+ will then do the expected and compile both modules with full
+ knowledge on symbols from both modules.
+
+ Use an extra Module.symvers file
+ When an external module is build a Module.symvers file is
+ generated containing all exported symbols which are not
+ defined in the kernel.
+ To get access to symbols from module 'bar' one can copy the
+ Module.symvers file from the compilation of the 'bar' module
+ to the directory where the 'foo' module is build.
+ During the module build kbuild will read the Module.symvers
+ file in the directory of the external module and when the
+ build is finished a new Module.symvers file is created
+ containing the sum of all symbols defined and not part of the
+ kernel.
+
=== 8. Tips & Tricks
--- 8.1 Testing for CONFIG_FOO_BAR