summaryrefslogtreecommitdiff
path: root/Documentation/kbuild
diff options
context:
space:
mode:
authorJani Nikula <jani.nikula@intel.com>2023-01-17 11:59:45 +0200
committerMasahiro Yamada <masahiroy@kernel.org>2023-01-22 23:43:34 +0900
commit9f1fe2bba382f43f8b91f5d6927541a6c6b4dda4 (patch)
tree34ba8b3ba88d7f2dba7127513e91596b91193b92 /Documentation/kbuild
parent1a4c1c9df72ec266f94631edc59f9f2a9dc5aa8c (diff)
docs/kbuild/makefiles: clean up indentation and whitespace
Remove the leading whitespaces, and clean up indentation and whitespace in general. Although the diff looks massive, it's trivial with 'diff -w' or 'git show -w'. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Diffstat (limited to 'Documentation/kbuild')
-rw-r--r--Documentation/kbuild/makefiles.rst1885
1 files changed, 958 insertions, 927 deletions
diff --git a/Documentation/kbuild/makefiles.rst b/Documentation/kbuild/makefiles.rst
index b0ace679a01b..3f7330ba5d90 100644
--- a/Documentation/kbuild/makefiles.rst
+++ b/Documentation/kbuild/makefiles.rst
@@ -22,6 +22,7 @@ The top Makefile is responsible for building two major products: vmlinux
(the resident kernel image) and modules (any module files).
It builds these goals by recursively descending into the subdirectories of
the kernel source tree.
+
The list of subdirectories which are visited depends upon the kernel
configuration. The top Makefile textually includes an arch Makefile
with the name arch/$(SRCARCH)/Makefile. The arch Makefile supplies
@@ -35,7 +36,6 @@ any built-in or modular targets.
scripts/Makefile.* contains all the definitions/rules etc. that
are used to build the kernel based on the kbuild makefiles.
-
Who does what
=============
@@ -68,6 +68,7 @@ The kbuild files
Most Makefiles within the kernel are kbuild Makefiles that use the
kbuild infrastructure. This chapter introduces the syntax used in the
kbuild makefiles.
+
The preferred name for the kbuild files are 'Makefile' but 'Kbuild' can
be used and if both a 'Makefile' and a 'Kbuild' file exists, then the 'Kbuild'
file will be used.
@@ -78,618 +79,624 @@ more details, with real examples.
Goal definitions
----------------
- Goal definitions are the main part (heart) of the kbuild Makefile.
- These lines define the files to be built, any special compilation
- options, and any subdirectories to be entered recursively.
+Goal definitions are the main part (heart) of the kbuild Makefile.
+These lines define the files to be built, any special compilation
+options, and any subdirectories to be entered recursively.
- The most simple kbuild makefile contains one line:
+The most simple kbuild makefile contains one line:
- Example::
+Example::
- obj-y += foo.o
+ obj-y += foo.o
- This tells kbuild that there is one object in that directory, named
- foo.o. foo.o will be built from foo.c or foo.S.
+This tells kbuild that there is one object in that directory, named
+foo.o. foo.o will be built from foo.c or foo.S.
- If foo.o shall be built as a module, the variable obj-m is used.
- Therefore the following pattern is often used:
+If foo.o shall be built as a module, the variable obj-m is used.
+Therefore the following pattern is often used:
- Example::
+Example::
- obj-$(CONFIG_FOO) += foo.o
+ obj-$(CONFIG_FOO) += foo.o
- $(CONFIG_FOO) evaluates to either y (for built-in) or m (for module).
- If CONFIG_FOO is neither y nor m, then the file will not be compiled
- nor linked.
+$(CONFIG_FOO) evaluates to either y (for built-in) or m (for module).
+If CONFIG_FOO is neither y nor m, then the file will not be compiled
+nor linked.
Built-in object goals - obj-y
-----------------------------
- The kbuild Makefile specifies object files for vmlinux
- in the $(obj-y) lists. These lists depend on the kernel
- configuration.
+The kbuild Makefile specifies object files for vmlinux
+in the $(obj-y) lists. These lists depend on the kernel
+configuration.
- Kbuild compiles all the $(obj-y) files. It then calls
- "$(AR) rcSTP" to merge these files into one built-in.a file.
- This is a thin archive without a symbol table. It will be later
- linked into vmlinux by scripts/link-vmlinux.sh
+Kbuild compiles all the $(obj-y) files. It then calls
+"$(AR) rcSTP" to merge these files into one built-in.a file.
+This is a thin archive without a symbol table. It will be later
+linked into vmlinux by scripts/link-vmlinux.sh
- The order of files in $(obj-y) is significant. Duplicates in
- the lists are allowed: the first instance will be linked into
- built-in.a and succeeding instances will be ignored.
+The order of files in $(obj-y) is significant. Duplicates in
+the lists are allowed: the first instance will be linked into
+built-in.a and succeeding instances will be ignored.
- Link order is significant, because certain functions
- (module_init() / __initcall) will be called during boot in the
- order they appear. So keep in mind that changing the link
- order may e.g. change the order in which your SCSI
- controllers are detected, and thus your disks are renumbered.
+Link order is significant, because certain functions
+(module_init() / __initcall) will be called during boot in the
+order they appear. So keep in mind that changing the link
+order may e.g. change the order in which your SCSI
+controllers are detected, and thus your disks are renumbered.
- Example::
+Example::
- #drivers/isdn/i4l/Makefile
- # Makefile for the kernel ISDN subsystem and device drivers.
- # Each configuration option enables a list of files.
- obj-$(CONFIG_ISDN_I4L) += isdn.o
- obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o
+ #drivers/isdn/i4l/Makefile
+ # Makefile for the kernel ISDN subsystem and device drivers.
+ # Each configuration option enables a list of files.
+ obj-$(CONFIG_ISDN_I4L) += isdn.o
+ obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o
Loadable module goals - obj-m
-----------------------------
- $(obj-m) specifies object files which are built as loadable
- kernel modules.
+$(obj-m) specifies object files which are built as loadable
+kernel modules.
- A module may be built from one source file or several source
- files. In the case of one source file, the kbuild makefile
- simply adds the file to $(obj-m).
+A module may be built from one source file or several source
+files. In the case of one source file, the kbuild makefile
+simply adds the file to $(obj-m).
- Example::
+Example::
- #drivers/isdn/i4l/Makefile
- obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o
+ #drivers/isdn/i4l/Makefile
+ obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o
- Note: In this example $(CONFIG_ISDN_PPP_BSDCOMP) evaluates to 'm'
+Note: In this example $(CONFIG_ISDN_PPP_BSDCOMP) evaluates to 'm'
- If a kernel module is built from several source files, you specify
- that you want to build a module in the same way as above; however,
- kbuild needs to know which object files you want to build your
- module from, so you have to tell it by setting a $(<module_name>-y)
- variable.
+If a kernel module is built from several source files, you specify
+that you want to build a module in the same way as above; however,
+kbuild needs to know which object files you want to build your
+module from, so you have to tell it by setting a $(<module_name>-y)
+variable.
- Example::
+Example::
- #drivers/isdn/i4l/Makefile
- obj-$(CONFIG_ISDN_I4L) += isdn.o
- isdn-y := isdn_net_lib.o isdn_v110.o isdn_common.o
+ #drivers/isdn/i4l/Makefile
+ obj-$(CONFIG_ISDN_I4L) += isdn.o
+ isdn-y := isdn_net_lib.o isdn_v110.o isdn_common.o
- In this example, the module name will be isdn.o. Kbuild will
- compile the objects listed in $(isdn-y) and then run
- "$(LD) -r" on the list of these files to generate isdn.o.
+In this example, the module name will be isdn.o. Kbuild will
+compile the objects listed in $(isdn-y) and then run
+"$(LD) -r" on the list of these files to generate isdn.o.
- Due to kbuild recognizing $(<module_name>-y) for composite objects,
- you can use the value of a `CONFIG_` symbol to optionally include an
- object file as part of a composite object.
+Due to kbuild recognizing $(<module_name>-y) for composite objects,
+you can use the value of a `CONFIG_` symbol to optionally include an
+object file as part of a composite object.
- Example::
+Example::
- #fs/ext2/Makefile
- obj-$(CONFIG_EXT2_FS) += ext2.o
- ext2-y := balloc.o dir.o file.o ialloc.o inode.o ioctl.o \
- namei.o super.o symlink.o
- ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o xattr_user.o \
- xattr_trusted.o
+ #fs/ext2/Makefile
+ obj-$(CONFIG_EXT2_FS) += ext2.o
+ ext2-y := balloc.o dir.o file.o ialloc.o inode.o ioctl.o \
+ namei.o super.o symlink.o
+ ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o xattr_user.o \
+ xattr_trusted.o
- In this example, xattr.o, xattr_user.o and xattr_trusted.o are only
- part of the composite object ext2.o if $(CONFIG_EXT2_FS_XATTR)
- evaluates to 'y'.
+In this example, xattr.o, xattr_user.o and xattr_trusted.o are only
+part of the composite object ext2.o if $(CONFIG_EXT2_FS_XATTR)
+evaluates to 'y'.
- Note: Of course, when you are building objects into the kernel,
- the syntax above will also work. So, if you have CONFIG_EXT2_FS=y,
- kbuild will build an ext2.o file for you out of the individual
- parts and then link this into built-in.a, as you would expect.
+Note: Of course, when you are building objects into the kernel,
+the syntax above will also work. So, if you have CONFIG_EXT2_FS=y,
+kbuild will build an ext2.o file for you out of the individual
+parts and then link this into built-in.a, as you would expect.
Library file goals - lib-y
--------------------------
- Objects listed with obj-* are used for modules, or
- combined in a built-in.a for that specific directory.
- There is also the possibility to list objects that will
- be included in a library, lib.a.
- All objects listed with lib-y are combined in a single
- library for that directory.
- Objects that are listed in obj-y and additionally listed in
- lib-y will not be included in the library, since they will
- be accessible anyway.
- For consistency, objects listed in lib-m will be included in lib.a.
+Objects listed with obj-* are used for modules, or
+combined in a built-in.a for that specific directory.
+There is also the possibility to list objects that will
+be included in a library, lib.a.
+All objects listed with lib-y are combined in a single
+library for that directory.
+Objects that are listed in obj-y and additionally listed in
+lib-y will not be included in the library, since they will
+be accessible anyway.
+For consistency, objects listed in lib-m will be included in lib.a.
- Note that the same kbuild makefile may list files to be built-in
- and to be part of a library. Therefore the same directory
- may contain both a built-in.a and a lib.a file.
+Note that the same kbuild makefile may list files to be built-in
+and to be part of a library. Therefore the same directory
+may contain both a built-in.a and a lib.a file.
- Example::
+Example::
- #arch/x86/lib/Makefile
- lib-y := delay.o
+ #arch/x86/lib/Makefile
+ lib-y := delay.o
- This will create a library lib.a based on delay.o. For kbuild to
- actually recognize that there is a lib.a being built, the directory
- shall be listed in libs-y.
+This will create a library lib.a based on delay.o. For kbuild to
+actually recognize that there is a lib.a being built, the directory
+shall be listed in libs-y.
- See also `List directories to visit when descending`_.
+See also `List directories to visit when descending`_.
- Use of lib-y is normally restricted to `lib/` and `arch/*/lib`.
+Use of lib-y is normally restricted to `lib/` and `arch/*/lib`.
Descending down in directories
------------------------------
- A Makefile is only responsible for building objects in its own
- directory. Files in subdirectories should be taken care of by
- Makefiles in these subdirs. The build system will automatically
- invoke make recursively in subdirectories, provided you let it know of
- them.
+A Makefile is only responsible for building objects in its own
+directory. Files in subdirectories should be taken care of by
+Makefiles in these subdirs. The build system will automatically
+invoke make recursively in subdirectories, provided you let it know of
+them.
- To do so, obj-y and obj-m are used.
- ext2 lives in a separate directory, and the Makefile present in fs/
- tells kbuild to descend down using the following assignment.
+To do so, obj-y and obj-m are used.
+ext2 lives in a separate directory, and the Makefile present in fs/
+tells kbuild to descend down using the following assignment.
- Example::
+Example::
- #fs/Makefile
- obj-$(CONFIG_EXT2_FS) += ext2/
+ #fs/Makefile
+ obj-$(CONFIG_EXT2_FS) += ext2/
- If CONFIG_EXT2_FS is set to either 'y' (built-in) or 'm' (modular)
- the corresponding obj- variable will be set, and kbuild will descend
- down in the ext2 directory.
+If CONFIG_EXT2_FS is set to either 'y' (built-in) or 'm' (modular)
+the corresponding obj- variable will be set, and kbuild will descend
+down in the ext2 directory.
- Kbuild uses this information not only to decide that it needs to visit
- the directory, but also to decide whether or not to link objects from
- the directory into vmlinux.
+Kbuild uses this information not only to decide that it needs to visit
+the directory, but also to decide whether or not to link objects from
+the directory into vmlinux.
- When Kbuild descends into the directory with 'y', all built-in objects
- from that directory are combined into the built-in.a, which will be
- eventually linked into vmlinux.
+When Kbuild descends into the directory with 'y', all built-in objects
+from that directory are combined into the built-in.a, which will be
+eventually linked into vmlinux.
- When Kbuild descends into the directory with 'm', in contrast, nothing
- from that directory will be linked into vmlinux. If the Makefile in
- that directory specifies obj-y, those objects will be left orphan.
- It is very likely a bug of the Makefile or of dependencies in Kconfig.
+When Kbuild descends into the directory with 'm', in contrast, nothing
+from that directory will be linked into vmlinux. If the Makefile in
+that directory specifies obj-y, those objects will be left orphan.
+It is very likely a bug of the Makefile or of dependencies in Kconfig.
- Kbuild also supports dedicated syntax, subdir-y and subdir-m, for
- descending into subdirectories. It is a good fit when you know they
- do not contain kernel-space objects at all. A typical usage is to let
- Kbuild descend into subdirectories to build tools.
+Kbuild also supports dedicated syntax, subdir-y and subdir-m, for
+descending into subdirectories. It is a good fit when you know they
+do not contain kernel-space objects at all. A typical usage is to let
+Kbuild descend into subdirectories to build tools.
- Examples::
+Examples::
- # scripts/Makefile
- subdir-$(CONFIG_GCC_PLUGINS) += gcc-plugins
- subdir-$(CONFIG_MODVERSIONS) += genksyms
- subdir-$(CONFIG_SECURITY_SELINUX) += selinux
+ # scripts/Makefile
+ subdir-$(CONFIG_GCC_PLUGINS) += gcc-plugins
+ subdir-$(CONFIG_MODVERSIONS) += genksyms
+ subdir-$(CONFIG_SECURITY_SELINUX) += selinux
- Unlike obj-y/m, subdir-y/m does not need the trailing slash since this
- syntax is always used for directories.
+Unlike obj-y/m, subdir-y/m does not need the trailing slash since this
+syntax is always used for directories.
- It is good practice to use a `CONFIG_` variable when assigning directory
- names. This allows kbuild to totally skip the directory if the
- corresponding `CONFIG_` option is neither 'y' nor 'm'.
+It is good practice to use a `CONFIG_` variable when assigning directory
+names. This allows kbuild to totally skip the directory if the
+corresponding `CONFIG_` option is neither 'y' nor 'm'.
Non-builtin vmlinux targets - extra-y
-------------------------------------
- extra-y specifies targets which are needed for building vmlinux,
- but not combined into built-in.a.
+extra-y specifies targets which are needed for building vmlinux,
+but not combined into built-in.a.
- Examples are:
+Examples are:
- 1) vmlinux linker script
+1) vmlinux linker script
- The linker script for vmlinux is located at
- arch/$(SRCARCH)/kernel/vmlinux.lds
+ The linker script for vmlinux is located at
+ arch/$(SRCARCH)/kernel/vmlinux.lds
- Example::
+Example::
- # arch/x86/kernel/Makefile
- extra-y += vmlinux.lds
+ # arch/x86/kernel/Makefile
+ extra-y += vmlinux.lds
- $(extra-y) should only contain targets needed for vmlinux.
+$(extra-y) should only contain targets needed for vmlinux.
- Kbuild skips extra-y when vmlinux is apparently not a final goal.
- (e.g. 'make modules', or building external modules)
+Kbuild skips extra-y when vmlinux is apparently not a final goal.
+(e.g. 'make modules', or building external modules)
- If you intend to build targets unconditionally, always-y (explained
- in the next section) is the correct syntax to use.
+If you intend to build targets unconditionally, always-y (explained
+in the next section) is the correct syntax to use.
Always built goals - always-y
-----------------------------
- always-y specifies targets which are literally always built when
- Kbuild visits the Makefile.
+always-y specifies targets which are literally always built when
+Kbuild visits the Makefile.
+
+Example::
- Example::
- # ./Kbuild
- offsets-file := include/generated/asm-offsets.h
- always-y += $(offsets-file)
+ # ./Kbuild
+ offsets-file := include/generated/asm-offsets.h
+ always-y += $(offsets-file)
Compilation flags
-----------------
- ccflags-y, asflags-y and ldflags-y
- These three flags apply only to the kbuild makefile in which they
- are assigned. They are used for all the normal cc, as and ld
- invocations happening during a recursive build.
- Note: Flags with the same behaviour were previously named:
- EXTRA_CFLAGS, EXTRA_AFLAGS and EXTRA_LDFLAGS.
- They are still supported but their usage is deprecated.
+ccflags-y, asflags-y and ldflags-y
+ These three flags apply only to the kbuild makefile in which they
+ are assigned. They are used for all the normal cc, as and ld
+ invocations happening during a recursive build.
+ Note: Flags with the same behaviour were previously named:
+ EXTRA_CFLAGS, EXTRA_AFLAGS and EXTRA_LDFLAGS.
+ They are still supported but their usage is deprecated.
- ccflags-y specifies options for compiling with $(CC).
+ ccflags-y specifies options for compiling with $(CC).
- Example::
+ Example::
- # drivers/acpi/acpica/Makefile
- ccflags-y := -Os -D_LINUX -DBUILDING_ACPICA
- ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT
+ # drivers/acpi/acpica/Makefile
+ ccflags-y := -Os -D_LINUX -DBUILDING_ACPICA
+ ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT
- This variable is necessary because the top Makefile owns the
- variable $(KBUILD_CFLAGS) and uses it for compilation flags for the
- entire tree.
+ This variable is necessary because the top Makefile owns the
+ variable $(KBUILD_CFLAGS) and uses it for compilation flags for the
+ entire tree.
- asflags-y specifies assembler options.
+ asflags-y specifies assembler options.
- Example::
+ Example::
- #arch/sparc/kernel/Makefile
- asflags-y := -ansi
+ #arch/sparc/kernel/Makefile
+ asflags-y := -ansi
- ldflags-y specifies options for linking with $(LD).
+ ldflags-y specifies options for linking with $(LD).
- Example::
+ Example::
- #arch/cris/boot/compressed/Makefile
- ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
+ #arch/cris/boot/compressed/Makefile
+ ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
- subdir-ccflags-y, subdir-asflags-y
- The two flags listed above are similar to ccflags-y and asflags-y.
- The difference is that the subdir- variants have effect for the kbuild
- file where they are present and all subdirectories.
- Options specified using subdir-* are added to the commandline before
- the options specified using the non-subdir variants.
+subdir-ccflags-y, subdir-asflags-y
+ The two flags listed above are similar to ccflags-y and asflags-y.
+ The difference is that the subdir- variants have effect for the kbuild
+ file where they are present and all subdirectories.
+ Options specified using subdir-* are added to the commandline before
+ the options specified using the non-subdir variants.
- Example::
+ Example::
- subdir-ccflags-y := -Werror
+ subdir-ccflags-y := -Werror
- ccflags-remove-y, asflags-remove-y
- These flags are used to remove particular flags for the compiler,
- assembler invocations.
+ccflags-remove-y, asflags-remove-y
+ These flags are used to remove particular flags for the compiler,
+ assembler invocations.
- Example::
+ Example::
- ccflags-remove-$(CONFIG_MCOUNT) += -pg
+ ccflags-remove-$(CONFIG_MCOUNT) += -pg
- CFLAGS_$@, AFLAGS_$@
- CFLAGS_$@ and AFLAGS_$@ only apply to commands in current
- kbuild makefile.
+CFLAGS_$@, AFLAGS_$@
+ CFLAGS_$@ and AFLAGS_$@ only apply to commands in current
+ kbuild makefile.
- $(CFLAGS_$@) specifies per-file options for $(CC). The $@
- part has a literal value which specifies the file that it is for.
+ $(CFLAGS_$@) specifies per-file options for $(CC). The $@
+ part has a literal value which specifies the file that it is for.
- CFLAGS_$@ has the higher priority than ccflags-remove-y; CFLAGS_$@
- can re-add compiler flags that were removed by ccflags-remove-y.
+ CFLAGS_$@ has the higher priority than ccflags-remove-y; CFLAGS_$@
+ can re-add compiler flags that were removed by ccflags-remove-y.
- Example::
+ Example::
- # drivers/scsi/Makefile
- CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF
+ # drivers/scsi/Makefile
+ CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF
- This line specify compilation flags for aha152x.o.
+ This line specify compilation flags for aha152x.o.
- $(AFLAGS_$@) is a similar feature for source files in assembly
- languages.
+ $(AFLAGS_$@) is a similar feature for source files in assembly
+ languages.
- AFLAGS_$@ has the higher priority than asflags-remove-y; AFLAGS_$@
- can re-add assembler flags that were removed by asflags-remove-y.
+ AFLAGS_$@ has the higher priority than asflags-remove-y; AFLAGS_$@
+ can re-add assembler flags that were removed by asflags-remove-y.
- Example::
-
- # arch/arm/kernel/Makefile
- AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
- AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
- AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
+ Example::
+ # arch/arm/kernel/Makefile
+ AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
+ AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
+ AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
Dependency tracking
-------------------
- Kbuild tracks dependencies on the following:
+Kbuild tracks dependencies on the following:
- 1) All prerequisite files (both `*.c` and `*.h`)
- 2) `CONFIG_` options used in all prerequisite files
- 3) Command-line used to compile target
+1) All prerequisite files (both `*.c` and `*.h`)
+2) `CONFIG_` options used in all prerequisite files
+3) Command-line used to compile target
- Thus, if you change an option to $(CC) all affected files will
- be re-compiled.
+Thus, if you change an option to $(CC) all affected files will
+be re-compiled.
Custom Rules
------------
- Custom rules are used when the kbuild infrastructure does
- not provide the required support. A typical example is
- header files generated during the build process.
- Another example are the architecture-specific Makefiles which
- need custom rules to prepare boot images etc.
+Custom rules are used when the kbuild infrastructure does
+not provide the required support. A typical example is
+header files generated during the build process.
+Another example are the architecture-specific Makefiles which
+need custom rules to prepare boot images etc.
- Custom rules are written as normal Make rules.
- Kbuild is not executing in the directory where the Makefile is
- located, so all custom rules shall use a relative
- path to prerequisite files and target files.
+Custom rules are written as normal Make rules.
+Kbuild is not executing in the directory where the Makefile is
+located, so all custom rules shall use a relative
+path to prerequisite files and target files.
- Two variables are used when defining custom rules:
+Two variables are used when defining custom rules:
- $(src)
- $(src) is a relative path which points to the directory
- where the Makefile is located. Always use $(src) when
- referring to files located in the src tree.
+$(src)
+ $(src) is a relative path which points to the directory
+ where the Makefile is located. Always use $(src) when
+ referring to files located in the src tree.
- $(obj)
- $(obj) is a relative path which points to the directory
- where the target is saved. Always use $(obj) when
- referring to generated files.
+$(obj)
+ $(obj) is a relative path which points to the directory
+ where the target is saved. Always use $(obj) when
+ referring to generated files.
- Example::
+ Example::
- #drivers/scsi/Makefile
- $(obj)/53c8xx_d.h: $(src)/53c7,8xx.scr $(src)/script_asm.pl
- $(CPP) -DCHIP=810 - < $< | ... $(src)/script_asm.pl
+ #drivers/scsi/Makefile
+ $(obj)/53c8xx_d.h: $(src)/53c7,8xx.scr $(src)/script_asm.pl
+ $(CPP) -DCHIP=810 - < $< | ... $(src)/script_asm.pl
- This is a custom rule, following the normal syntax
- required by make.
+ This is a custom rule, following the normal syntax
+ required by make.
- The target file depends on two prerequisite files. References
- to the target file are prefixed with $(obj), references
- to prerequisites are referenced with $(src) (because they are not
- generated files).
+ The target file depends on two prerequisite files. References
+ to the target file are prefixed with $(obj), references
+ to prerequisites are referenced with $(src) (because they are not
+ generated files).
- $(kecho)
- echoing information to user in a rule is often a good practice
- but when execution "make -s" one does not expect to see any output
- except for warnings/errors.
- To support this kbuild defines $(kecho) which will echo out the
- text following $(kecho) to stdout except if "make -s" is used.
+$(kecho)
+ echoing information to user in a rule is often a good practice
+ but when execution "make -s" one does not expect to see any output
+ except for warnings/errors.
+ To support this kbuild defines $(kecho) which will echo out the
+ text following $(kecho) to stdout except if "make -s" is used.
- Example::
+ Example::
- # arch/arm/Makefile
- $(BOOT_TARGETS): vmlinux
- $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
- @$(kecho) ' Kernel: $(boot)/$@ is ready'
+ # arch/arm/Makefile
+ $(BOOT_TARGETS): vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+ @$(kecho) ' Kernel: $(boot)/$@ is ready'
- When kbuild is executing with KBUILD_VERBOSE unset, then only a shorthand
- of a command is normally displayed.
- To enable this behaviour for custom commands kbuild requires
- two variables to be set::
+ When kbuild is executing with KBUILD_VERBOSE unset, then only a shorthand
+ of a command is normally displayed.
+ To enable this behaviour for custom commands kbuild requires
+ two variables to be set::
- quiet_cmd_<command> - what shall be echoed
- cmd_<command> - the command to execute
+ quiet_cmd_<command> - what shall be echoed
+ cmd_<command> - the command to execute
- Example::
+ Example::
- # lib/Makefile
- quiet_cmd_crc32 = GEN $@
- cmd_crc32 = $< > $@
+ # lib/Makefile
+ quiet_cmd_crc32 = GEN $@
+ cmd_crc32 = $< > $@
- $(obj)/crc32table.h: $(obj)/gen_crc32table
- $(call cmd,crc32)
+ $(obj)/crc32table.h: $(obj)/gen_crc32table
+ $(call cmd,crc32)
- When updating the $(obj)/crc32table.h target, the line:
+ When updating the $(obj)/crc32table.h target, the line::
- GEN lib/crc32table.h
+ GEN lib/crc32table.h
- will be displayed with "make KBUILD_VERBOSE=".
+ will be displayed with "make KBUILD_VERBOSE=".
Command change detection
------------------------
- When the rule is evaluated, timestamps are compared between the target
- and its prerequisite files. GNU Make updates the target when any of the
- prerequisites is newer than that.
+When the rule is evaluated, timestamps are compared between the target
+and its prerequisite files. GNU Make updates the target when any of the
+prerequisites is newer than that.
- The target should be rebuilt also when the command line has changed
- since the last invocation. This is not supported by Make itself, so
- Kbuild achieves this by a kind of meta-programming.
+The target should be rebuilt also when the command line has changed
+since the last invocation. This is not supported by Make itself, so
+Kbuild achieves this by a kind of meta-programming.
- if_changed is the macro used for this purpose, in the following form::
+if_changed is the macro used for this purpose, in the following form::
- quiet_cmd_<command> = ...
- cmd_<command> = ...
+ quiet_cmd_<command> = ...
+ cmd_<command> = ...
- <target>: <source(s)> FORCE
- $(call if_changed,<command>)
+ <target>: <source(s)> FORCE
+ $(call if_changed,<command>)
- Any target that utilizes if_changed must be listed in $(targets),
- otherwise the command line check will fail, and the target will
- always be built.
+Any target that utilizes if_changed must be listed in $(targets),
+otherwise the command line check will fail, and the target will
+always be built.
- If the target is already listed in the recognized syntax such as
- obj-y/m, lib-y/m, extra-y/m, always-y/m, hostprogs, userprogs, Kbuild
- automatically adds it to $(targets). Otherwise, the target must be
- explicitly added to $(targets).
+If the target is already listed in the recognized syntax such as
+obj-y/m, lib-y/m, extra-y/m, always-y/m, hostprogs, userprogs, Kbuild
+automatically adds it to $(targets). Otherwise, the target must be
+explicitly added to $(targets).
- Assignments to $(targets) are without $(obj)/ prefix. if_changed may be
- used in conjunction with custom rules as defined in `Custom Rules`_.
+Assignments to $(targets) are without $(obj)/ prefix. if_changed may be
+used in conjunction with custom rules as defined in `Custom Rules`_.
- Note: It is a typical mistake to forget the FORCE prerequisite.
- Another common pitfall is that whitespace is sometimes significant; for
- instance, the below will fail (note the extra space after the comma)::
+Note: It is a typical mistake to forget the FORCE prerequisite.
+Another common pitfall is that whitespace is sometimes significant; for
+instance, the below will fail (note the extra space after the comma)::
- target: source(s) FORCE
+ target: source(s) FORCE
- **WRONG!** $(call if_changed, objcopy)
+**WRONG!** $(call if_changed, objcopy)
- Note:
- if_changed should not be used more than once per target.
- It stores the executed command in a corresponding .cmd
- file and multiple calls would result in overwrites and
- unwanted results when the target is up to date and only the
- tests on changed commands trigger execution of commands.
+Note:
+ if_changed should not be used more than once per target.
+ It stores the executed command in a corresponding .cmd
+ file and multiple calls would result in overwrites and
+ unwanted results when the target is up to date and only the
+ tests on changed commands trigger execution of commands.
$(CC) support functions
-----------------------
- The kernel may be built with several different versions of
- $(CC), each supporting a unique set of features and options.
- kbuild provides basic support to check for valid options for $(CC).
- $(CC) is usually the gcc compiler, but other alternatives are
- available.
+The kernel may be built with several different versions of
+$(CC), each supporting a unique set of features and options.
+kbuild provides basic support to check for valid options for $(CC).
+$(CC) is usually the gcc compiler, but other alternatives are
+available.
+
+as-option
+ as-option is used to check if $(CC) -- when used to compile
+ assembler (`*.S`) files -- supports the given option. An optional
+ second option may be specified if the first option is not supported.
+
+ Example::
+
+ #arch/sh/Makefile
+ cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),)
- as-option
- as-option is used to check if $(CC) -- when used to compile
- assembler (`*.S`) files -- supports the given option. An optional
- second option may be specified if the first option is not supported.
+ In the above example, cflags-y will be assigned the option
+ -Wa$(comma)-isa=$(isa-y) if it is supported by $(CC).
+ The second argument is optional, and if supplied will be used
+ if first argument is not supported.
- Example::
+as-instr
+ as-instr checks if the assembler reports a specific instruction
+ and then outputs either option1 or option2
+ C escapes are supported in the test instruction
+ Note: as-instr-option uses KBUILD_AFLAGS for assembler options
- #arch/sh/Makefile
- cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),)
+cc-option
+ cc-option is used to check if $(CC) supports a given option, and if
+ not supported to use an optional second option.
- In the above example, cflags-y will be assigned the option
- -Wa$(comma)-isa=$(isa-y) if it is supported by $(CC).
- The second argument is optional, and if supplied will be used
- if first argument is not supported.
+ Example::
- as-instr
- as-instr checks if the assembler reports a specific instruction
- and then outputs either option1 or option2
- C escapes are supported in the test instruction
- Note: as-instr-option uses KBUILD_AFLAGS for assembler options
+ #arch/x86/Makefile
+ cflags-y += $(call cc-option,-march=pentium-mmx,-march=i586)
- cc-option
- cc-option is used to check if $(CC) supports a given option, and if
- not supported to use an optional second option.
+ In the above example, cflags-y will be assigned the option
+ -march=pentium-mmx if supported by $(CC), otherwise -march=i586.
+ The second argument to cc-option is optional, and if omitted,
+ cflags-y will be assigned no value if first option is not supported.
+ Note: cc-option uses KBUILD_CFLAGS for $(CC) options
- Example::
+cc-option-yn
+ cc-option-yn is used to check if gcc supports a given option
+ and return 'y' if supported, otherwise 'n'.
- #arch/x86/Makefile
- cflags-y += $(call cc-option,-march=pentium-mmx,-march=i586)
+ Example::
- In the above example, cflags-y will be assigned the option
- -march=pentium-mmx if supported by $(CC), otherwise -march=i586.
- The second argument to cc-option is optional, and if omitted,
- cflags-y will be assigned no value if first option is not supported.
- Note: cc-option uses KBUILD_CFLAGS for $(CC) options
+ #arch/ppc/Makefile
+ biarch := $(call cc-option-yn, -m32)
+ aflags-$(biarch) += -a32
+ cflags-$(biarch) += -m32
- cc-option-yn
- cc-option-yn is used to check if gcc supports a given option
- and return 'y' if supported, otherwise 'n'.
+ In the above example, $(biarch) is set to y if $(CC) supports the -m32
+ option. When $(biarch) equals 'y', the expanded variables $(aflags-y)
+ and $(cflags-y) will be assigned the values -a32 and -m32,
+ respectively.
- Example::
+ Note: cc-option-yn uses KBUILD_CFLAGS for $(CC) options
- #arch/ppc/Makefile
- biarch := $(call cc-option-yn, -m32)
- aflags-$(biarch) += -a32
- cflags-$(biarch) += -m32
+cc-disable-warning
+ cc-disable-warning checks if gcc supports a given warning and returns
+ the commandline switch to disable it. This special function is needed,
+ because gcc 4.4 and later accept any unknown -Wno-* option and only
+ warn about it if there is another warning in the source file.
- In the above example, $(biarch) is set to y if $(CC) supports the -m32
- option. When $(biarch) equals 'y', the expanded variables $(aflags-y)
- and $(cflags-y) will be assigned the values -a32 and -m32,
- respectively.
- Note: cc-option-yn uses KBUILD_CFLAGS for $(CC) options
+ Example::
- cc-disable-warning
- cc-disable-warning checks if gcc supports a given warning and returns
- the commandline switch to disable it. This special function is needed,
- because gcc 4.4 and later accept any unknown -Wno-* option and only
- warn about it if there is another warning in the source file.
+ KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
- Example::
+ In the above example, -Wno-unused-but-set-variable will be added to
+ KBUILD_CFLAGS only if gcc really accepts it.
- KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+gcc-min-version
+ gcc-min-version tests if the value of $(CONFIG_GCC_VERSION) is greater than
+ or equal to the provided value and evaluates to y if so.
- In the above example, -Wno-unused-but-set-variable will be added to
- KBUILD_CFLAGS only if gcc really accepts it.
+ Example::
- gcc-min-version
- gcc-min-version tests if the value of $(CONFIG_GCC_VERSION) is greater than
- or equal to the provided value and evaluates to y if so.
+ cflags-$(call gcc-min-version, 70100) := -foo
- Example::
+ In this example, cflags-y will be assigned the value -foo if $(CC) is gcc and
+ $(CONFIG_GCC_VERSION) is >= 7.1.
- cflags-$(call gcc-min-version, 70100) := -foo
+clang-min-version
+ clang-min-version tests if the value of $(CONFIG_CLANG_VERSION) is greater
+ than or equal to the provided value and evaluates to y if so.
- In this example, cflags-y will be assigned the value -foo if $(CC) is gcc and
- $(CONFIG_GCC_VERSION) is >= 7.1.
+ Example::
- clang-min-version
- clang-min-version tests if the value of $(CONFIG_CLANG_VERSION) is greater
- than or equal to the provided value and evaluates to y if so.
+ cflags-$(call clang-min-version, 110000) := -foo
- Example::
+ In this example, cflags-y will be assigned the value -foo if $(CC) is clang
+ and $(CONFIG_CLANG_VERSION) is >= 11.0.0.
- cflags-$(call clang-min-version, 110000) := -foo
+cc-cross-prefix
+ cc-cross-prefix is used to check if there exists a $(CC) in path with
+ one of the listed prefixes. The first prefix where there exist a
+ prefix$(CC) in the PATH is returned - and if no prefix$(CC) is found
+ then nothing is returned.
- In this example, cflags-y will be assigned the value -foo if $(CC) is clang
- and $(CONFIG_CLANG_VERSION) is >= 11.0.0.
+ Additional prefixes are separated by a single space in the
+ call of cc-cross-prefix.
- cc-cross-prefix
- cc-cross-prefix is used to check if there exists a $(CC) in path with
- one of the listed prefixes. The first prefix where there exist a
- prefix$(CC) in the PATH is returned - and if no prefix$(CC) is found
- then nothing is returned.
- Additional prefixes are separated by a single space in the
- call of cc-cross-prefix.
- This functionality is useful for architecture Makefiles that try
- to set CROSS_COMPILE to well-known values but may have several
- values to select between.
- It is recommended only to try to set CROSS_COMPILE if it is a cross
- build (host arch is different from target arch). And if CROSS_COMPILE
- is already set then leave it with the old value.
+ This functionality is useful for architecture Makefiles that try
+ to set CROSS_COMPILE to well-known values but may have several
+ values to select between.
- Example::
+ It is recommended only to try to set CROSS_COMPILE if it is a cross
+ build (host arch is different from target arch). And if CROSS_COMPILE
+ is already set then leave it with the old value.
- #arch/m68k/Makefile
- ifneq ($(SUBARCH),$(ARCH))
- ifeq ($(CROSS_COMPILE),)
- CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu-)
- endif
- endif
+ Example::
+
+ #arch/m68k/Makefile
+ ifneq ($(SUBARCH),$(ARCH))
+ ifeq ($(CROSS_COMPILE),)
+ CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu-)
+ endif
+ endif
$(LD) support functions
-----------------------
- ld-option
- ld-option is used to check if $(LD) supports the supplied option.
- ld-option takes two options as arguments.
- The second argument is an optional option that can be used if the
- first option is not supported by $(LD).
+ld-option
+ ld-option is used to check if $(LD) supports the supplied option.
+ ld-option takes two options as arguments.
+
+ The second argument is an optional option that can be used if the
+ first option is not supported by $(LD).
- Example::
+ Example::
- #Makefile
- LDFLAGS_vmlinux += $(call ld-option, -X)
+ #Makefile
+ LDFLAGS_vmlinux += $(call ld-option, -X)
Script invocation
-----------------
- Make rules may invoke scripts to build the kernel. The rules shall
- always provide the appropriate interpreter to execute the script. They
- shall not rely on the execute bits being set, and shall not invoke the
- script directly. For the convenience of manual script invocation, such
- as invoking ./scripts/checkpatch.pl, it is recommended to set execute
- bits on the scripts nonetheless.
+Make rules may invoke scripts to build the kernel. The rules shall
+always provide the appropriate interpreter to execute the script. They
+shall not rely on the execute bits being set, and shall not invoke the
+script directly. For the convenience of manual script invocation, such
+as invoking ./scripts/checkpatch.pl, it is recommended to set execute
+bits on the scripts nonetheless.
- Kbuild provides variables $(CONFIG_SHELL), $(AWK), $(PERL),
- and $(PYTHON3) to refer to interpreters for the respective
- scripts.
+Kbuild provides variables $(CONFIG_SHELL), $(AWK), $(PERL),
+and $(PYTHON3) to refer to interpreters for the respective
+scripts.
- Example::
+Example::
- #Makefile
- cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
- $(KERNELRELEASE)
+ #Makefile
+ cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
+ $(KERNELRELEASE)
Host Program support
====================
Kbuild supports building executables on the host for use during the
compilation stage.
+
Two steps are required in order to use a host executable.
The first step is to tell kbuild that a host program exists. This is
@@ -703,154 +710,157 @@ Both possibilities are described in the following.
Simple Host Program
-------------------
- In some cases there is a need to compile and run a program on the
- computer where the build is running.
- The following line tells kbuild that the program bin2hex shall be
- built on the build host.
+In some cases there is a need to compile and run a program on the
+computer where the build is running.
+
+The following line tells kbuild that the program bin2hex shall be
+built on the build host.
- Example::
+Example::
- hostprogs := bin2hex
+ hostprogs := bin2hex
- Kbuild assumes in the above example that bin2hex is made from a single
- c-source file named bin2hex.c located in the same directory as
- the Makefile.
+Kbuild assumes in the above example that bin2hex is made from a single
+c-source file named bin2hex.c located in the same directory as
+the Makefile.
Composite Host Programs
-----------------------
- Host programs can be made up based on composite objects.
- The syntax used to define composite objects for host programs is
- similar to the syntax used for kernel objects.
- $(<executable>-objs) lists all objects used to link the final
- executable.
+Host programs can be made up based on composite objects.
+The syntax used to define composite objects for host programs is
+similar to the syntax used for kernel objects.
+$(<executable>-objs) lists all objects used to link the final
+executable.
- Example::
+Example::
- #scripts/lxdialog/Makefile
- hostprogs := lxdialog
- lxdialog-objs := checklist.o lxdialog.o
+ #scripts/lxdialog/Makefile
+ hostprogs := lxdialog
+ lxdialog-objs := checklist.o lxdialog.o
- Objects with extension .o are compiled from the corresponding .c
- files. In the above example, checklist.c is compiled to checklist.o
- and lxdialog.c is compiled to lxdialog.o.
+Objects with extension .o are compiled from the corresponding .c
+files. In the above example, checklist.c is compiled to checklist.o
+and lxdialog.c is compiled to lxdialog.o.
- Finally, the two .o files are linked to the executable, lxdialog.
- Note: The syntax <executable>-y is not permitted for host-programs.
+Finally, the two .o files are linked to the executable, lxdialog.
+Note: The syntax <executable>-y is not permitted for host-programs.
Using C++ for host programs
---------------------------
- kbuild offers support for host programs written in C++. This was
- introduced solely to support kconfig, and is not recommended
- for general use.
+kbuild offers support for host programs written in C++. This was
+introduced solely to support kconfig, and is not recommended
+for general use.
- Example::
+Example::
- #scripts/kconfig/Makefile
- hostprogs := qconf
- qconf-cxxobjs := qconf.o
+ #scripts/kconfig/Makefile
+ hostprogs := qconf
+ qconf-cxxobjs := qconf.o
- In the example above the executable is composed of the C++ file
- qconf.cc - identified by $(qconf-cxxobjs).
+In the example above the executable is composed of the C++ file
+qconf.cc - identified by $(qconf-cxxobjs).
- If qconf is composed of a mixture of .c and .cc files, then an
- additional line can be used to identify this.
+If qconf is composed of a mixture of .c and .cc files, then an
+additional line can be used to identify this.
- Example::
+Example::
- #scripts/kconfig/Makefile
- hostprogs := qconf
- qconf-cxxobjs := qconf.o
- qconf-objs := check.o
+ #scripts/kconfig/Makefile
+ hostprogs := qconf
+ qconf-cxxobjs := qconf.o
+ qconf-objs := check.o
Using Rust for host programs
----------------------------
- Kbuild offers support for host programs written in Rust. However,
- since a Rust toolchain is not mandatory for kernel compilation,
- it may only be used in scenarios where Rust is required to be
- available (e.g. when ``CONFIG_RUST`` is enabled).
+Kbuild offers support for host programs written in Rust. However,
+since a Rust toolchain is not mandatory for kernel compilation,
+it may only be used in scenarios where Rust is required to be
+available (e.g. when ``CONFIG_RUST`` is enabled).
- Example::
+Example::
- hostprogs := target
- target-rust := y
+ hostprogs := target
+ target-rust := y
- Kbuild will compile ``target`` using ``target.rs`` as the crate root,
- located in the same directory as the ``Makefile``. The crate may
- consist of several source files (see ``samples/rust/hostprogs``).
+Kbuild will compile ``target`` using ``target.rs`` as the crate root,
+located in the same directory as the ``Makefile``. The crate may
+consist of several source files (see ``samples/rust/hostprogs``).
Controlling compiler options for host programs
----------------------------------------------
- When compiling host programs, it is possible to set specific flags.
- The programs will always be compiled utilising $(HOSTCC) passed
- the options specified in $(KBUILD_HOSTCFLAGS).
- To set flags that will take effect for all host programs created
- in that Makefile, use the variable HOST_EXTRACFLAGS.
+When compiling host programs, it is possible to set specific flags.
+The programs will always be compiled utilising $(HOSTCC) passed
+the options specified in $(KBUILD_HOSTCFLAGS).
- Example::
+To set flags that will take effect for all host programs created
+in that Makefile, use the variable HOST_EXTRACFLAGS.
- #scripts/lxdialog/Makefile
- HOST_EXTRACFLAGS += -I/usr/include/ncurses
+Example::
- To set specific flags for a single file the following construction
- is used:
+ #scripts/lxdialog/Makefile
+ HOST_EXTRACFLAGS += -I/usr/include/ncurses
- Example::
+To set specific flags for a single file the following construction
+is used:
- #arch/ppc64/boot/Makefile
- HOSTCFLAGS_piggyback.o := -DKERNELBASE=$(KERNELBASE)
+Example::
- It is also possible to specify additional options to the linker.
+ #arch/ppc64/boot/Makefile
+ HOSTCFLAGS_piggyback.o := -DKERNELBASE=$(KERNELBASE)
- Example::
+It is also possible to specify additional options to the linker.
- #scripts/kconfig/Makefile
- HOSTLDLIBS_qconf := -L$(QTDIR)/lib
+Example::
- When linking qconf, it will be passed the extra option
- "-L$(QTDIR)/lib".
+ #scripts/kconfig/Makefile
+ HOSTLDLIBS_qconf := -L$(QTDIR)/lib
+
+When linking qconf, it will be passed the extra option
+"-L$(QTDIR)/lib".
When host programs are actually built
-------------------------------------
- Kbuild will only build host-programs when they are referenced
- as a prerequisite.
- This is possible in two ways:
+Kbuild will only build host-programs when they are referenced
+as a prerequisite.
+
+This is possible in two ways:
- (1) List the prerequisite explicitly in a custom rule.
+(1) List the prerequisite explicitly in a custom rule.
- Example::
+ Example::
- #drivers/pci/Makefile
- hostprogs := gen-devlist
- $(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist
- ( cd $(obj); ./gen-devlist ) < $<
+ #drivers/pci/Makefile
+ hostprogs := gen-devlist
+ $(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist
+ ( cd $(obj); ./gen-devlist ) < $<
- The target $(obj)/devlist.h will not be built before
- $(obj)/gen-devlist is updated. Note that references to
- the host programs in custom rules must be prefixed with $(obj).
+ The target $(obj)/devlist.h will not be built before
+ $(obj)/gen-devlist is updated. Note that references to
+ the host programs in custom rules must be prefixed with $(obj).
- (2) Use always-y
+(2) Use always-y
- When there is no suitable custom rule, and the host program
- shall be built when a makefile is entered, the always-y
- variable shall be used.
+ When there is no suitable custom rule, and the host program
+ shall be built when a makefile is entered, the always-y
+ variable shall be used.
- Example::
+ Example::
- #scripts/lxdialog/Makefile
- hostprogs := lxdialog
- always-y := $(hostprogs)
+ #scripts/lxdialog/Makefile
+ hostprogs := lxdialog
+ always-y := $(hostprogs)
- Kbuild provides the following shorthand for this:
+ Kbuild provides the following shorthand for this::
- hostprogs-always-y := lxdialog
+ hostprogs-always-y := lxdialog
- This will tell kbuild to build lxdialog even if not referenced in
- any rule.
+ This will tell kbuild to build lxdialog even if not referenced in
+ any rule.
Userspace Program support
=========================
@@ -865,100 +875,101 @@ The syntax is quite similar. The difference is to use "userprogs" instead of
Simple Userspace Program
------------------------
- The following line tells kbuild that the program bpf-direct shall be
- built for the target architecture.
+The following line tells kbuild that the program bpf-direct shall be
+built for the target architecture.
- Example::
+Example::
- userprogs := bpf-direct
+ userprogs := bpf-direct
- Kbuild assumes in the above example that bpf-direct is made from a
- single C source file named bpf-direct.c located in the same directory
- as the Makefile.
+Kbuild assumes in the above example that bpf-direct is made from a
+single C source file named bpf-direct.c located in the same directory
+as the Makefile.
Composite Userspace Programs
----------------------------
- Userspace programs can be made up based on composite objects.
- The syntax used to define composite objects for userspace programs is
- similar to the syntax used for kernel objects.
- $(<executable>-objs) lists all objects used to link the final
- executable.
+Userspace programs can be made up based on composite objects.
+The syntax used to define composite objects for userspace programs is
+similar to the syntax used for kernel objects.
+$(<executable>-objs) lists all objects used to link the final
+executable.
- Example::
+Example::
- #samples/seccomp/Makefile
- userprogs := bpf-fancy
- bpf-fancy-objs := bpf-fancy.o bpf-helper.o
+ #samples/seccomp/Makefile
+ userprogs := bpf-fancy
+ bpf-fancy-objs := bpf-fancy.o bpf-helper.o
- Objects with extension .o are compiled from the corresponding .c
- files. In the above example, bpf-fancy.c is compiled to bpf-fancy.o
- and bpf-helper.c is compiled to bpf-helper.o.
+Objects with extension .o are compiled from the corresponding .c
+files. In the above example, bpf-fancy.c is compiled to bpf-fancy.o
+and bpf-helper.c is compiled to bpf-helper.o.
- Finally, the two .o files are linked to the executable, bpf-fancy.
- Note: The syntax <executable>-y is not permitted for userspace programs.
+Finally, the two .o files are linked to the executable, bpf-fancy.
+Note: The syntax <executable>-y is not permitted for userspace programs.
Controlling compiler options for userspace programs
---------------------------------------------------
- When compiling userspace programs, it is possible to set specific flags.
- The programs will always be compiled utilising $(CC) passed
- the options specified in $(KBUILD_USERCFLAGS).
- To set flags that will take effect for all userspace programs created
- in that Makefile, use the variable userccflags.
+When compiling userspace programs, it is possible to set specific flags.
+The programs will always be compiled utilising $(CC) passed
+the options specified in $(KBUILD_USERCFLAGS).
+
+To set flags that will take effect for all userspace programs created
+in that Makefile, use the variable userccflags.
- Example::
+Example::
- # samples/seccomp/Makefile
- userccflags += -I usr/include
+ # samples/seccomp/Makefile
+ userccflags += -I usr/include
- To set specific flags for a single file the following construction
- is used:
+To set specific flags for a single file the following construction
+is used:
- Example::
+Example::
- bpf-helper-userccflags += -I user/include
+ bpf-helper-userccflags += -I user/include
- It is also possible to specify additional options to the linker.
+It is also possible to specify additional options to the linker.
- Example::
+Example::
- # net/bpfilter/Makefile
- bpfilter_umh-userldflags += -static
+ # net/bpfilter/Makefile
+ bpfilter_umh-userldflags += -static
- When linking bpfilter_umh, it will be passed the extra option -static.
+When linking bpfilter_umh, it will be passed the extra option -static.
- From command line, :ref:`USERCFLAGS and USERLDFLAGS <userkbuildflags>` will also be used.
+From command line, :ref:`USERCFLAGS and USERLDFLAGS <userkbuildflags>` will also be used.
When userspace programs are actually built
------------------------------------------
- Kbuild builds userspace programs only when told to do so.
- There are two ways to do this.
+Kbuild builds userspace programs only when told to do so.
+There are two ways to do this.
- (1) Add it as the prerequisite of another file
+(1) Add it as the prerequisite of another file
- Example::
+ Example::
- #net/bpfilter/Makefile
- userprogs := bpfilter_umh
- $(obj)/bpfilter_umh_blob.o: $(obj)/bpfilter_umh
+ #net/bpfilter/Makefile
+ userprogs := bpfilter_umh
+ $(obj)/bpfilter_umh_blob.o: $(obj)/bpfilter_umh
- $(obj)/bpfilter_umh is built before $(obj)/bpfilter_umh_blob.o
+ $(obj)/bpfilter_umh is built before $(obj)/bpfilter_umh_blob.o
- (2) Use always-y
+(2) Use always-y
- Example::
+ Example::
- userprogs := binderfs_example
- always-y := $(userprogs)
+ userprogs := binderfs_example
+ always-y := $(userprogs)
- Kbuild provides the following shorthand for this:
+ Kbuild provides the following shorthand for this::
- userprogs-always-y := binderfs_example
+ userprogs-always-y := binderfs_example
- This will tell Kbuild to build binderfs_example when it visits this
- Makefile.
+ This will tell Kbuild to build binderfs_example when it visits this
+ Makefile.
Kbuild clean infrastructure
===========================
@@ -974,10 +985,10 @@ source tree when "make clean" is executed.
Additional files or directories can be specified in kbuild makefiles by use of
$(clean-files).
- Example::
+Example::
- #lib/Makefile
- clean-files := crc32table.h
+ #lib/Makefile
+ clean-files := crc32table.h
When executing "make clean", the file "crc32table.h" will be deleted.
Kbuild will assume files to be in the same relative directory as the
@@ -990,10 +1001,10 @@ Usually kbuild descends down in subdirectories due to "obj-* := dir/",
but in the architecture makefiles where the kbuild infrastructure
is not sufficient this sometimes needs to be explicit.
- Example::
+Example::
- #arch/x86/boot/Makefile
- subdir- := compressed
+ #arch/x86/boot/Makefile
+ subdir- := compressed
The above assignment instructs kbuild to descend down in the
directory compressed/ when "make clean" is executed.
@@ -1010,442 +1021,461 @@ Architecture Makefiles
The top level Makefile sets up the environment and does the preparation,
before starting to descend down in the individual directories.
+
The top level makefile contains the generic part, whereas
arch/$(SRCARCH)/Makefile contains what is required to set up kbuild
for said architecture.
+
To do so, arch/$(SRCARCH)/Makefile sets up a number of variables and defines
a few targets.
When kbuild executes, the following steps are followed (roughly):
1) Configuration of the kernel => produce .config
+
2) Store kernel version in include/linux/version.h
+
3) Updating all other prerequisites to the target prepare:
+
- Additional prerequisites are specified in arch/$(SRCARCH)/Makefile
+
4) Recursively descend down in all directories listed in
init-* core* drivers-* net-* libs-* and build all targets.
+
- The values of the above variables are expanded in arch/$(SRCARCH)/Makefile.
+
5) All object files are then linked and the resulting file vmlinux is
located at the root of the obj tree.
The very first objects linked are listed in scripts/head-object-list.txt.
+
6) Finally, the architecture-specific part does any required post processing
and builds the final bootimage.
+
- This includes building boot records
- Preparing initrd images and the like
-
Set variables to tweak the build to the architecture
----------------------------------------------------
- KBUILD_LDFLAGS
- Generic $(LD) options
+KBUILD_LDFLAGS
+ Generic $(LD) options
- Flags used for all invocations of the linker.
- Often specifying the emulation is sufficient.
+ Flags used for all invocations of the linker.
+ Often specifying the emulation is sufficient.
- Example::
+ Example::
- #arch/s390/Makefile
- KBUILD_LDFLAGS := -m elf_s390
+ #arch/s390/Makefile
+ KBUILD_LDFLAGS := -m elf_s390
- Note: ldflags-y can be used to further customise
- the flags used. See `Non-builtin vmlinux targets - extra-y`_.
+ Note: ldflags-y can be used to further customise
+ the flags used. See `Non-builtin vmlinux targets - extra-y`_.
- LDFLAGS_vmlinux
- Options for $(LD) when linking vmlinux
+LDFLAGS_vmlinux
+ Options for $(LD) when linking vmlinux
- LDFLAGS_vmlinux is used to specify additional flags to pass to
- the linker when linking the final vmlinux image.
- LDFLAGS_vmlinux uses the LDFLAGS_$@ support.
+ LDFLAGS_vmlinux is used to specify additional flags to pass to
+ the linker when linking the final vmlinux image.
- Example::
+ LDFLAGS_vmlinux uses the LDFLAGS_$@ support.
- #arch/x86/Makefile
- LDFLAGS_vmlinux := -e stext
+ Example::
- OBJCOPYFLAGS
- objcopy flags
+ #arch/x86/Makefile
+ LDFLAGS_vmlinux := -e stext
- When $(call if_changed,objcopy) is used to translate a .o file,
- the flags specified in OBJCOPYFLAGS will be used.
- $(call if_changed,objcopy) is often used to generate raw binaries on
- vmlinux.
+OBJCOPYFLAGS
+ objcopy flags
- Example::
+ When $(call if_changed,objcopy) is used to translate a .o file,
+ the flags specified in OBJCOPYFLAGS will be used.
- #arch/s390/Makefile
- OBJCOPYFLAGS := -O binary
+ $(call if_changed,objcopy) is often used to generate raw binaries on
+ vmlinux.
- #arch/s390/boot/Makefile
- $(obj)/image: vmlinux FORCE
- $(call if_changed,objcopy)
+ Example::
- In this example, the binary $(obj)/image is a binary version of
- vmlinux. The usage of $(call if_changed,xxx) will be described later.
+ #arch/s390/Makefile
+ OBJCOPYFLAGS := -O binary
- KBUILD_AFLAGS
- Assembler flags
+ #arch/s390/boot/Makefile
+ $(obj)/image: vmlinux FORCE
+ $(call if_changed,objcopy)
- Default value - see top level Makefile
- Append or modify as required per architecture.
+ In this example, the binary $(obj)/image is a binary version of
+ vmlinux. The usage of $(call if_changed,xxx) will be described later.
- Example::
+KBUILD_AFLAGS
+ Assembler flags
- #arch/sparc64/Makefile
- KBUILD_AFLAGS += -m64 -mcpu=ultrasparc
+ Default value - see top level Makefile.
- KBUILD_CFLAGS
- $(CC) compiler flags
+ Append or modify as required per architecture.
- Default value - see top level Makefile
- Append or modify as required per architecture.
+ Example::
- Often, the KBUILD_CFLAGS variable depends on the configuration.
+ #arch/sparc64/Makefile
+ KBUILD_AFLAGS += -m64 -mcpu=ultrasparc
- Example::
+KBUILD_CFLAGS
+ $(CC) compiler flags
- #arch/x86/boot/compressed/Makefile
- cflags-$(CONFIG_X86_32) := -march=i386
- cflags-$(CONFIG_X86_64) := -mcmodel=small
- KBUILD_CFLAGS += $(cflags-y)
+ Default value - see top level Makefile.
- Many arch Makefiles dynamically run the target C compiler to
- probe supported options::
+ Append or modify as required per architecture.
- #arch/x86/Makefile
+ Often, the KBUILD_CFLAGS variable depends on the configuration.
- ...
- cflags-$(CONFIG_MPENTIUMII) += $(call cc-option,\
- -march=pentium2,-march=i686)
- ...
- # Disable unit-at-a-time mode ...
- KBUILD_CFLAGS += $(call cc-option,-fno-unit-at-a-time)
- ...
+ Example::
+
+ #arch/x86/boot/compressed/Makefile
+ cflags-$(CONFIG_X86_32) := -march=i386
+ cflags-$(CONFIG_X86_64) := -mcmodel=small
+ KBUILD_CFLAGS += $(cflags-y)
+
+ Many arch Makefiles dynamically run the target C compiler to
+ probe supported options::
+
+ #arch/x86/Makefile
+ ...
+ cflags-$(CONFIG_MPENTIUMII) += $(call cc-option,\
+ -march=pentium2,-march=i686)
+ ...
+ # Disable unit-at-a-time mode ...
+ KBUILD_CFLAGS += $(call cc-option,-fno-unit-at-a-time)
+ ...
- The first example utilises the trick that a config option expands
- to 'y' when selected.
- KBUILD_RUSTFLAGS
- $(RUSTC) compiler flags
+ The first example utilises the trick that a config option expands
+ to 'y' when selected.
- Default value - see top level Makefile
- Append or modify as required per architecture.
+KBUILD_RUSTFLAGS
+ $(RUSTC) compiler flags
- Often, the KBUILD_RUSTFLAGS variable depends on the configuration.
+ Default value - see top level Makefile.
- Note that target specification file generation (for ``--target``)
- is handled in ``scripts/generate_rust_target.rs``.
+ Append or modify as required per architecture.
- KBUILD_AFLAGS_KERNEL
- Assembler options specific for built-in
+ Often, the KBUILD_RUSTFLAGS variable depends on the configuration.
- $(KBUILD_AFLAGS_KERNEL) contains extra C compiler flags used to compile
- resident kernel code.
+ Note that target specification file generation (for ``--target``)
+ is handled in ``scripts/generate_rust_target.rs``.
- KBUILD_AFLAGS_MODULE
- Assembler options specific for modules
+KBUILD_AFLAGS_KERNEL
+ Assembler options specific for built-in
- $(KBUILD_AFLAGS_MODULE) is used to add arch-specific options that
- are used for assembler.
+ $(KBUILD_AFLAGS_KERNEL) contains extra C compiler flags used to compile
+ resident kernel code.
- From commandline AFLAGS_MODULE shall be used (see kbuild.rst).
+KBUILD_AFLAGS_MODULE
+ Assembler options specific for modules
- KBUILD_CFLAGS_KERNEL
- $(CC) options specific for built-in
+ $(KBUILD_AFLAGS_MODULE) is used to add arch-specific options that
+ are used for assembler.
- $(KBUILD_CFLAGS_KERNEL) contains extra C compiler flags used to compile
- resident kernel code.
+ From commandline AFLAGS_MODULE shall be used (see kbuild.rst).
- KBUILD_CFLAGS_MODULE
- Options for $(CC) when building modules
+KBUILD_CFLAGS_KERNEL
+ $(CC) options specific for built-in
- $(KBUILD_CFLAGS_MODULE) is used to add arch-specific options that
- are used for $(CC).
- From commandline CFLAGS_MODULE shall be used (see kbuild.rst).
+ $(KBUILD_CFLAGS_KERNEL) contains extra C compiler flags used to compile
+ resident kernel code.
- KBUILD_RUSTFLAGS_KERNEL
- $(RUSTC) options specific for built-in
+KBUILD_CFLAGS_MODULE
+ Options for $(CC) when building modules
- $(KBUILD_RUSTFLAGS_KERNEL) contains extra Rust compiler flags used to
- compile resident kernel code.
+ $(KBUILD_CFLAGS_MODULE) is used to add arch-specific options that
+ are used for $(CC).
- KBUILD_RUSTFLAGS_MODULE
- Options for $(RUSTC) when building modules
+ From commandline CFLAGS_MODULE shall be used (see kbuild.rst).
- $(KBUILD_RUSTFLAGS_MODULE) is used to add arch-specific options that
- are used for $(RUSTC).
- From commandline RUSTFLAGS_MODULE shall be used (see kbuild.rst).
+KBUILD_RUSTFLAGS_KERNEL
+ $(RUSTC) options specific for built-in
- KBUILD_LDFLAGS_MODULE
- Options for $(LD) when linking modules
+ $(KBUILD_RUSTFLAGS_KERNEL) contains extra Rust compiler flags used to
+ compile resident kernel code.
- $(KBUILD_LDFLAGS_MODULE) is used to add arch-specific options
- used when linking modules. This is often a linker script.
+KBUILD_RUSTFLAGS_MODULE
+ Options for $(RUSTC) when building modules
- From commandline LDFLAGS_MODULE shall be used (see kbuild.rst).
+ $(KBUILD_RUSTFLAGS_MODULE) is used to add arch-specific options that
+ are used for $(RUSTC).
- KBUILD_LDS
+ From commandline RUSTFLAGS_MODULE shall be used (see kbuild.rst).
- The linker script with full path. Assigned by the top-level Makefile.
+KBUILD_LDFLAGS_MODULE
+ Options for $(LD) when linking modules
- KBUILD_LDS_MODULE
+ $(KBUILD_LDFLAGS_MODULE) is used to add arch-specific options
+ used when linking modules. This is often a linker script.
- The module linker script with full path. Assigned by the top-level
- Makefile and additionally by the arch Makefile.
+ From commandline LDFLAGS_MODULE shall be used (see kbuild.rst).
- KBUILD_VMLINUX_OBJS
+KBUILD_LDS
+ The linker script with full path. Assigned by the top-level Makefile.
- All object files for vmlinux. They are linked to vmlinux in the same
- order as listed in KBUILD_VMLINUX_OBJS.
+KBUILD_LDS_MODULE
+ The module linker script with full path. Assigned by the top-level
+ Makefile and additionally by the arch Makefile.
- The objects listed in scripts/head-object-list.txt are exceptions;
- they are placed before the other objects.
+KBUILD_VMLINUX_OBJS
+ All object files for vmlinux. They are linked to vmlinux in the same
+ order as listed in KBUILD_VMLINUX_OBJS.
- KBUILD_VMLINUX_LIBS
+ The objects listed in scripts/head-object-list.txt are exceptions;
+ they are placed before the other objects.
- All .a "lib" files for vmlinux. KBUILD_VMLINUX_OBJS and
- KBUILD_VMLINUX_LIBS together specify all the object files used to
- link vmlinux.
+KBUILD_VMLINUX_LIBS
+ All .a "lib" files for vmlinux. KBUILD_VMLINUX_OBJS and
+ KBUILD_VMLINUX_LIBS together specify all the object files used to
+ link vmlinux.
Add prerequisites to archheaders
--------------------------------
- The archheaders: rule is used to generate header files that
- may be installed into user space by "make header_install".
-
- It is run before "make archprepare" when run on the
- architecture itself.
+The archheaders: rule is used to generate header files that
+may be installed into user space by "make header_install".
+It is run before "make archprepare" when run on the
+architecture itself.
Add prerequisites to archprepare
--------------------------------
- The archprepare: rule is used to list prerequisites that need to be
- built before starting to descend down in the subdirectories.
- This is usually used for header files containing assembler constants.
+The archprepare: rule is used to list prerequisites that need to be
+built before starting to descend down in the subdirectories.
- Example::
+This is usually used for header files containing assembler constants.
- #arch/arm/Makefile
- archprepare: maketools
+Example::
- In this example, the file target maketools will be processed
- before descending down in the subdirectories.
- See also chapter XXX-TODO that describes how kbuild supports
- generating offset header files.
+ #arch/arm/Makefile
+ archprepare: maketools
+In this example, the file target maketools will be processed
+before descending down in the subdirectories.
+
+See also chapter XXX-TODO that describes how kbuild supports
+generating offset header files.
List directories to visit when descending
-----------------------------------------
- An arch Makefile cooperates with the top Makefile to define variables
- which specify how to build the vmlinux file. Note that there is no
- corresponding arch-specific section for modules; the module-building
- machinery is all architecture-independent.
-
+An arch Makefile cooperates with the top Makefile to define variables
+which specify how to build the vmlinux file. Note that there is no
+corresponding arch-specific section for modules; the module-building
+machinery is all architecture-independent.
- core-y, libs-y, drivers-y
+core-y, libs-y, drivers-y
+ $(libs-y) lists directories where a lib.a archive can be located.
- $(libs-y) lists directories where a lib.a archive can be located.
+ The rest list directories where a built-in.a object file can be
+ located.
- The rest list directories where a built-in.a object file can be
- located.
+ Then the rest follows in this order:
- Then the rest follows in this order:
+ $(core-y), $(libs-y), $(drivers-y)
- $(core-y), $(libs-y), $(drivers-y)
+ The top level Makefile defines values for all generic directories,
+ and arch/$(SRCARCH)/Makefile only adds architecture-specific
+ directories.
- The top level Makefile defines values for all generic directories,
- and arch/$(SRCARCH)/Makefile only adds architecture-specific
- directories.
+ Example::
- Example::
+ # arch/sparc/Makefile
+ core-y += arch/sparc/
- # arch/sparc/Makefile
- core-y += arch/sparc/
+ libs-y += arch/sparc/prom/
+ libs-y += arch/sparc/lib/
- libs-y += arch/sparc/prom/
- libs-y += arch/sparc/lib/
-
- drivers-$(CONFIG_PM) += arch/sparc/power/
+ drivers-$(CONFIG_PM) += arch/sparc/power/
Architecture-specific boot images
---------------------------------
- An arch Makefile specifies goals that take the vmlinux file, compress
- it, wrap it in bootstrapping code, and copy the resulting files
- somewhere. This includes various kinds of installation commands.
- The actual goals are not standardized across architectures.
+An arch Makefile specifies goals that take the vmlinux file, compress
+it, wrap it in bootstrapping code, and copy the resulting files
+somewhere. This includes various kinds of installation commands.
+The actual goals are not standardized across architectures.
+
+It is common to locate any additional processing in a boot/
+directory below arch/$(SRCARCH)/.
- It is common to locate any additional processing in a boot/
- directory below arch/$(SRCARCH)/.
+Kbuild does not provide any smart way to support building a
+target specified in boot/. Therefore arch/$(SRCARCH)/Makefile shall
+call make manually to build a target in boot/.
- Kbuild does not provide any smart way to support building a
- target specified in boot/. Therefore arch/$(SRCARCH)/Makefile shall
- call make manually to build a target in boot/.
+The recommended approach is to include shortcuts in
+arch/$(SRCARCH)/Makefile, and use the full path when calling down
+into the arch/$(SRCARCH)/boot/Makefile.
- The recommended approach is to include shortcuts in
- arch/$(SRCARCH)/Makefile, and use the full path when calling down
- into the arch/$(SRCARCH)/boot/Makefile.
+Example::
- Example::
+ #arch/x86/Makefile
+ boot := arch/x86/boot
+ bzImage: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
- #arch/x86/Makefile
- boot := arch/x86/boot
- bzImage: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+"$(Q)$(MAKE) $(build)=<dir>" is the recommended way to invoke
+make in a subdirectory.
- "$(Q)$(MAKE) $(build)=<dir>" is the recommended way to invoke
- make in a subdirectory.
+There are no rules for naming architecture-specific targets,
+but executing "make help" will list all relevant targets.
+To support this, $(archhelp) must be defined.
- There are no rules for naming architecture-specific targets,
- but executing "make help" will list all relevant targets.
- To support this, $(archhelp) must be defined.
+Example::
- Example::
+ #arch/x86/Makefile
+ define archhelp
+ echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
+ endif
- #arch/x86/Makefile
- define archhelp
- echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
- endif
+When make is executed without arguments, the first goal encountered
+will be built. In the top level Makefile the first goal present
+is all:.
- When make is executed without arguments, the first goal encountered
- will be built. In the top level Makefile the first goal present
- is all:.
- An architecture shall always, per default, build a bootable image.
- In "make help", the default goal is highlighted with a '*'.
- Add a new prerequisite to all: to select a default goal different
- from vmlinux.
+An architecture shall always, per default, build a bootable image.
+In "make help", the default goal is highlighted with a '*'.
- Example::
+Add a new prerequisite to all: to select a default goal different
+from vmlinux.
- #arch/x86/Makefile
- all: bzImage
+Example::
- When "make" is executed without arguments, bzImage will be built.
+ #arch/x86/Makefile
+ all: bzImage
+
+When "make" is executed without arguments, bzImage will be built.
Commands useful for building a boot image
-----------------------------------------
- Kbuild provides a few macros that are useful when building a
- boot image.
+Kbuild provides a few macros that are useful when building a
+boot image.
+
+ld
+ Link target. Often, LDFLAGS_$@ is used to set specific options to ld.
- ld
- Link target. Often, LDFLAGS_$@ is used to set specific options to ld.
+ Example::
- Example::
+ #arch/x86/boot/Makefile
+ LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
+ LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext
- #arch/x86/boot/Makefile
- LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
- LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext
+ targets += setup setup.o bootsect bootsect.o
+ $(obj)/setup $(obj)/bootsect: %: %.o FORCE
+ $(call if_changed,ld)
- targets += setup setup.o bootsect bootsect.o
- $(obj)/setup $(obj)/bootsect: %: %.o FORCE
- $(call if_changed,ld)
+ In this example, there are two possible targets, requiring different
+ options to the linker. The linker options are specified using the
+ LDFLAGS_$@ syntax - one for each potential target.
- In this example, there are two possible targets, requiring different
- options to the linker. The linker options are specified using the
- LDFLAGS_$@ syntax - one for each potential target.
- $(targets) are assigned all potential targets, by which kbuild knows
- the targets and will:
+ $(targets) are assigned all potential targets, by which kbuild knows
+ the targets and will:
- 1) check for commandline changes
- 2) delete target during make clean
+ 1) check for commandline changes
+ 2) delete target during make clean
- The ": %: %.o" part of the prerequisite is a shorthand that
- frees us from listing the setup.o and bootsect.o files.
+ The ": %: %.o" part of the prerequisite is a shorthand that
+ frees us from listing the setup.o and bootsect.o files.
- Note:
- It is a common mistake to forget the "targets :=" assignment,
- resulting in the target file being recompiled for no
- obvious reason.
+ Note:
+ It is a common mistake to forget the "targets :=" assignment,
+ resulting in the target file being recompiled for no
+ obvious reason.
- objcopy
- Copy binary. Uses OBJCOPYFLAGS usually specified in
- arch/$(SRCARCH)/Makefile.
- OBJCOPYFLAGS_$@ may be used to set additional options.
+objcopy
+ Copy binary. Uses OBJCOPYFLAGS usually specified in
+ arch/$(SRCARCH)/Makefile.
- gzip
- Compress target. Use maximum compression to compress target.
+ OBJCOPYFLAGS_$@ may be used to set additional options.
- Example::
+gzip
+ Compress target. Use maximum compression to compress target.
- #arch/x86/boot/compressed/Makefile
- $(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
- $(call if_changed,gzip)
+ Example::
- dtc
- Create flattened device tree blob object suitable for linking
- into vmlinux. Device tree blobs linked into vmlinux are placed
- in an init section in the image. Platform code *must* copy the
- blob to non-init memory prior to calling unflatten_device_tree().
+ #arch/x86/boot/compressed/Makefile
+ $(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
+ $(call if_changed,gzip)
- To use this command, simply add `*.dtb` into obj-y or targets, or make
- some other target depend on `%.dtb`
+dtc
+ Create flattened device tree blob object suitable for linking
+ into vmlinux. Device tree blobs linked into vmlinux are placed
+ in an init section in the image. Platform code *must* copy the
+ blob to non-init memory prior to calling unflatten_device_tree().
- A central rule exists to create `$(obj)/%.dtb` from `$(src)/%.dts`;
- architecture Makefiles do no need to explicitly write out that rule.
+ To use this command, simply add `*.dtb` into obj-y or targets, or make
+ some other target depend on `%.dtb`
- Example::
+ A central rule exists to create `$(obj)/%.dtb` from `$(src)/%.dts`;
+ architecture Makefiles do no need to explicitly write out that rule.
- targets += $(dtb-y)
- DTC_FLAGS ?= -p 1024
+ Example::
+
+ targets += $(dtb-y)
+ DTC_FLAGS ?= -p 1024
Preprocessing linker scripts
----------------------------
- When the vmlinux image is built, the linker script
- arch/$(SRCARCH)/kernel/vmlinux.lds is used.
- The script is a preprocessed variant of the file vmlinux.lds.S
- located in the same directory.
- kbuild knows .lds files and includes a rule `*lds.S` -> `*lds`.
+When the vmlinux image is built, the linker script
+arch/$(SRCARCH)/kernel/vmlinux.lds is used.
+
+The script is a preprocessed variant of the file vmlinux.lds.S
+located in the same directory.
+
+kbuild knows .lds files and includes a rule `*lds.S` -> `*lds`.
+
+Example::
- Example::
+ #arch/x86/kernel/Makefile
+ extra-y := vmlinux.lds
- #arch/x86/kernel/Makefile
- extra-y := vmlinux.lds
+The assignment to extra-y is used to tell kbuild to build the
+target vmlinux.lds.
- The assignment to extra-y is used to tell kbuild to build the
- target vmlinux.lds.
- The assignment to $(CPPFLAGS_vmlinux.lds) tells kbuild to use the
- specified options when building the target vmlinux.lds.
+The assignment to $(CPPFLAGS_vmlinux.lds) tells kbuild to use the
+specified options when building the target vmlinux.lds.
- When building the `*.lds` target, kbuild uses the variables::
+When building the `*.lds` target, kbuild uses the variables::
- KBUILD_CPPFLAGS : Set in top-level Makefile
- cppflags-y : May be set in the kbuild makefile
- CPPFLAGS_$(@F) : Target-specific flags.
- Note that the full filename is used in this
- assignment.
+ KBUILD_CPPFLAGS : Set in top-level Makefile
+ cppflags-y : May be set in the kbuild makefile
+ CPPFLAGS_$(@F) : Target-specific flags.
+ Note that the full filename is used in this
+ assignment.
- The kbuild infrastructure for `*lds` files is used in several
- architecture-specific files.
+The kbuild infrastructure for `*lds` files is used in several
+architecture-specific files.
Generic header files
--------------------
- The directory include/asm-generic contains the header files
- that may be shared between individual architectures.
- The recommended approach how to use a generic header file is
- to list the file in the Kbuild file.
- See `generic-y`_ for further info on syntax etc.
+The directory include/asm-generic contains the header files
+that may be shared between individual architectures.
+
+The recommended approach how to use a generic header file is
+to list the file in the Kbuild file.
+
+See `generic-y`_ for further info on syntax etc.
Post-link pass
--------------
- If the file arch/xxx/Makefile.postlink exists, this makefile
- will be invoked for post-link objects (vmlinux and modules.ko)
- for architectures to run post-link passes on. Must also handle
- the clean target.
+If the file arch/xxx/Makefile.postlink exists, this makefile
+will be invoked for post-link objects (vmlinux and modules.ko)
+for architectures to run post-link passes on. Must also handle
+the clean target.
- This pass runs after kallsyms generation. If the architecture
- needs to modify symbol locations, rather than manipulate the
- kallsyms, it may be easier to add another postlink target for
- .tmp_vmlinux? targets to be called from link-vmlinux.sh.
+This pass runs after kallsyms generation. If the architecture
+needs to modify symbol locations, rather than manipulate the
+kallsyms, it may be easier to add another postlink target for
+.tmp_vmlinux? targets to be called from link-vmlinux.sh.
- For example, powerpc uses this to check relocation sanity of
- the linked vmlinux file.
+For example, powerpc uses this to check relocation sanity of
+the linked vmlinux file.
Kbuild syntax for exported headers
==================================
@@ -1453,6 +1483,7 @@ Kbuild syntax for exported headers
The kernel includes a set of headers that is exported to userspace.
Many headers can be exported as-is but other headers require a
minimal pre-processing before they are ready for user-space.
+
The pre-processing does:
- drop kernel-specific annotations
@@ -1465,136 +1496,136 @@ are exported.
A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and
arch/<arch>/include/asm/ to list asm files coming from asm-generic.
+
See subsequent chapter for the syntax of the Kbuild file.
no-export-headers
-----------------
- no-export-headers is essentially used by include/uapi/linux/Kbuild to
- avoid exporting specific headers (e.g. kvm.h) on architectures that do
- not support it. It should be avoided as much as possible.
+no-export-headers is essentially used by include/uapi/linux/Kbuild to
+avoid exporting specific headers (e.g. kvm.h) on architectures that do
+not support it. It should be avoided as much as possible.
generic-y
---------
- If an architecture uses a verbatim copy of a header from
- include/asm-generic then this is listed in the file
- arch/$(SRCARCH)/include/asm/Kbuild like this:
+If an architecture uses a verbatim copy of a header from
+include/asm-generic then this is listed in the file
+arch/$(SRCARCH)/include/asm/Kbuild like this:
- Example::
+Example::
- #arch/x86/include/asm/Kbuild
- generic-y += termios.h
- generic-y += rtc.h
+ #arch/x86/include/asm/Kbuild
+ generic-y += termios.h
+ generic-y += rtc.h
- During the prepare phase of the build a wrapper include
- file is generated in the directory::
+During the prepare phase of the build a wrapper include
+file is generated in the directory::
- arch/$(SRCARCH)/include/generated/asm
+ arch/$(SRCARCH)/include/generated/asm
- When a header is exported where the architecture uses
- the generic header a similar wrapper is generated as part
- of the set of exported headers in the directory::
+When a header is exported where the architecture uses
+the generic header a similar wrapper is generated as part
+of the set of exported headers in the directory::
- usr/include/asm
+ usr/include/asm
- The generated wrapper will in both cases look like the following:
+The generated wrapper will in both cases look like the following:
- Example: termios.h::
+Example: termios.h::
- #include <asm-generic/termios.h>
+ #include <asm-generic/termios.h>
generated-y
-----------
- If an architecture generates other header files alongside generic-y
- wrappers, generated-y specifies them.
+If an architecture generates other header files alongside generic-y
+wrappers, generated-y specifies them.
- This prevents them being treated as stale asm-generic wrappers and
- removed.
+This prevents them being treated as stale asm-generic wrappers and
+removed.
- Example::
+Example::
- #arch/x86/include/asm/Kbuild
- generated-y += syscalls_32.h
+ #arch/x86/include/asm/Kbuild
+ generated-y += syscalls_32.h
mandatory-y
-----------
- mandatory-y is essentially used by include/(uapi/)asm-generic/Kbuild
- to define the minimum set of ASM headers that all architectures must have.
+mandatory-y is essentially used by include/(uapi/)asm-generic/Kbuild
+to define the minimum set of ASM headers that all architectures must have.
- This works like optional generic-y. If a mandatory header is missing
- in arch/$(SRCARCH)/include/(uapi/)/asm, Kbuild will automatically
- generate a wrapper of the asm-generic one.
+This works like optional generic-y. If a mandatory header is missing
+in arch/$(SRCARCH)/include/(uapi/)/asm, Kbuild will automatically
+generate a wrapper of the asm-generic one.
Kbuild Variables
================
The top Makefile exports the following variables:
- VERSION, PATCHLEVEL, SUBLEVEL, EXTRAVERSION
- These variables define the current kernel version. A few arch
- Makefiles actually use these values directly; they should use
- $(KERNELRELEASE) instead.
-
- $(VERSION), $(PATCHLEVEL), and $(SUBLEVEL) define the basic
- three-part version number, such as "2", "4", and "0". These three
- values are always numeric.
-
- $(EXTRAVERSION) defines an even tinier sublevel for pre-patches
- or additional patches. It is usually some non-numeric string
- such as "-pre4", and is often blank.
-
- KERNELRELEASE
- $(KERNELRELEASE) is a single string such as "2.4.0-pre4", suitable
- for constructing installation directory names or showing in
- version strings. Some arch Makefiles use it for this purpose.
-
- ARCH
- This variable defines the target architecture, such as "i386",
- "arm", or "sparc". Some kbuild Makefiles test $(ARCH) to
- determine which files to compile.
-
- By default, the top Makefile sets $(ARCH) to be the same as the
- host system architecture. For a cross build, a user may
- override the value of $(ARCH) on the command line::
-
- make ARCH=m68k ...
-
- SRCARCH
- This variable specifies the directory in arch/ to build.
-
- ARCH and SRCARCH may not necessarily match. A couple of arch
- directories are biarch, that is, a single `arch/*/` directory supports
- both 32-bit and 64-bit.
-
- For example, you can pass in ARCH=i386, ARCH=x86_64, or ARCH=x86.
- For all of them, SRCARCH=x86 because arch/x86/ supports both i386 and
- x86_64.
-
- INSTALL_PATH
- This variable defines a place for the arch Makefiles to install
- the resident kernel image and System.map file.
- Use this for architecture-specific install targets.
-
- INSTALL_MOD_PATH, MODLIB
- $(INSTALL_MOD_PATH) specifies a prefix to $(MODLIB) for module
- installation. This variable is not defined in the Makefile but
- may be passed in by the user if desired.
-
- $(MODLIB) specifies the directory for module installation.
- The top Makefile defines $(MODLIB) to
- $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE). The user may
- override this value on the command line if desired.
-
- INSTALL_MOD_STRIP
- If this variable is specified, it will cause modules to be stripped
- after they are installed. If INSTALL_MOD_STRIP is '1', then the
- default option --strip-debug will be used. Otherwise, the
- INSTALL_MOD_STRIP value will be used as the option(s) to the strip
- command.
-
+VERSION, PATCHLEVEL, SUBLEVEL, EXTRAVERSION
+ These variables define the current kernel version. A few arch
+ Makefiles actually use these values directly; they should use
+ $(KERNELRELEASE) instead.
+
+ $(VERSION), $(PATCHLEVEL), and $(SUBLEVEL) define the basic
+ three-part version number, such as "2", "4", and "0". These three
+ values are always numeric.
+
+ $(EXTRAVERSION) defines an even tinier sublevel for pre-patches
+ or additional patches. It is usually some non-numeric string
+ such as "-pre4", and is often blank.
+
+KERNELRELEASE
+ $(KERNELRELEASE) is a single string such as "2.4.0-pre4", suitable
+ for constructing installation directory names or showing in
+ version strings. Some arch Makefiles use it for this purpose.
+
+ARCH
+ This variable defines the target architecture, such as "i386",
+ "arm", or "sparc". Some kbuild Makefiles test $(ARCH) to
+ determine which files to compile.
+
+ By default, the top Makefile sets $(ARCH) to be the same as the
+ host system architecture. For a cross build, a user may
+ override the value of $(ARCH) on the command line::
+
+ make ARCH=m68k ...
+
+SRCARCH
+ This variable specifies the directory in arch/ to build.
+
+ ARCH and SRCARCH may not necessarily match. A couple of arch
+ directories are biarch, that is, a single `arch/*/` directory supports
+ both 32-bit and 64-bit.
+
+ For example, you can pass in ARCH=i386, ARCH=x86_64, or ARCH=x86.
+ For all of them, SRCARCH=x86 because arch/x86/ supports both i386 and
+ x86_64.
+
+INSTALL_PATH
+ This variable defines a place for the arch Makefiles to install
+ the resident kernel image and System.map file.
+ Use this for architecture-specific install targets.
+
+INSTALL_MOD_PATH, MODLIB
+ $(INSTALL_MOD_PATH) specifies a prefix to $(MODLIB) for module
+ installation. This variable is not defined in the Makefile but
+ may be passed in by the user if desired.
+
+ $(MODLIB) specifies the directory for module installation.
+ The top Makefile defines $(MODLIB) to
+ $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE). The user may
+ override this value on the command line if desired.
+
+INSTALL_MOD_STRIP
+ If this variable is specified, it will cause modules to be stripped
+ after they are installed. If INSTALL_MOD_STRIP is '1', then the
+ default option --strip-debug will be used. Otherwise, the
+ INSTALL_MOD_STRIP value will be used as the option(s) to the strip
+ command.
Makefile language
=================