summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-08-08 11:16:58 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-08-08 11:16:58 -0700
commitd4e1f5a14e17d4f0e8034c0967511884bcb12fba (patch)
tree8f35e6e4b7925c1aa6981b691aa51b1bfa1b4fa8 /Documentation
parent231bf80f7f14107f7ecfa2e0a2b0c56e6a793284 (diff)
parent8850e0ba5721c2e2db34bc38290722db1b402be5 (diff)
Merge tag 'dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device-tree changes from Olof Johansson: "Unlike the board branch, this keeps having large sets of changes for every release, but that's quite expected and is so far working well. Most of this is plumbing for various device bindings and new platforms, but there's also a bit of cleanup and code removal for things that are moved from platform code to DT contents (some OMAP clock code in particular). There's also a pinctrl driver for tegra here (appropriately acked), that's introduced this way to make it more bisectable. I'm happy to say that there were no conflicts at all with this branch this release, which means that changes are flowing through our tree as expected instead of merged through driver maintainers (or at least not done with conflicts). There are several new boards added, and a couple of SoCs. In no particular order: - Rockchip RK3288 SoC support, including DTS for a dev board that they have seeded with some community developers. - Better support for Hardkernel Exynos4-based ODROID boards. - CCF conversions (and dtsi contents) for several Renesas platforms. - Gumstix Pepper (TI AM335x) board support - TI eval board support for AM437x - Allwinner A23 SoC, very similar to existing ones which mostly has resulted in DT changes for support. Also includes support for an Ippo tablet with the chipset. - Allwinner A31 Hummingbird board support, not to be confused with the SolidRun i.MX-based Hummingboard. - Tegra30 Apalis board support" * tag 'dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (334 commits) ARM: dts: Enable USB host0 (EHCI) on rk3288-evb ARM: dts: add rk3288 ehci usb devices ARM: dts: Turn on USB host vbus on rk3288-evb ARM: tegra: apalis t30: fix device tree compatible node ARM: tegra: paz00: Fix some indentation inconsistencies ARM: zynq: DT: Clarify Xilinx Zynq platform ARM: dts: rockchip: add watchdog node ARM: dts: rockchip: remove pinctrl setting from radxarock uart2 ARM: dts: Add missing pinctrl for uart0/1 for exynos3250 ARM: dts: Remove duplicate 'interrput-parent' property for exynos3250 ARM: dts: Add TMU dt node to monitor the temperature for exynos3250 ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250 ARM: dts: cypress,cyapa trackpad is exynos5250-Snow only ARM: dts: max77686 is exynos5250-snow only ARM: zynq: DT: Remove DMA from board DTs ARM: zynq: DT: Add CAN node ARM: EXYNOS: Add exynos5260 PMU compatible string to DT match table ARM: dts: Add PMU DT node for exynos5260 SoC ARM: EXYNOS: Add support for Exynos5410 PMU ARM: dts: Add PMU to exynos5410 ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/arm/adapteva.txt7
-rw-r--r--Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt14
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-pmc.txt5
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method36
-rw-r--r--Documentation/devicetree/bindings/arm/brcm-brcmstb.txt95
-rw-r--r--Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp41
-rw-r--r--Documentation/devicetree/bindings/arm/cpus.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/gic.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/marvell,berlin.txt16
-rw-r--r--Documentation/devicetree/bindings/arm/omap/omap.txt3
-rw-r--r--Documentation/devicetree/bindings/arm/omap/prcm.txt65
-rw-r--r--Documentation/devicetree/bindings/arm/samsung/pmu.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/tegra.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/xilinx.txt8
-rw-r--r--Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt43
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt127
-rw-r--r--Documentation/devicetree/bindings/serial/cdns,uart.txt20
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt3
18 files changed, 487 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/arm/adapteva.txt b/Documentation/devicetree/bindings/arm/adapteva.txt
new file mode 100644
index 000000000000..1d8af9e36065
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/adapteva.txt
@@ -0,0 +1,7 @@
+Adapteva Platforms Device Tree Bindings
+---------------------------------------
+
+Parallella board
+
+Required root node properties:
+ - compatible = "adapteva,parallella";
diff --git a/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt
new file mode 100644
index 000000000000..8781073029e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt
@@ -0,0 +1,14 @@
+Marvell Armada 38x CA9 MPcore SoC Controller
+============================================
+
+Required properties:
+
+- compatible: Should be "marvell,armada-380-mpcore-soc-ctrl".
+
+- reg: should be the register base and length as documented in the
+ datasheet for the CA9 MPcore SoC Control registers
+
+mpcore-soc-ctrl@20d20 {
+ compatible = "marvell,armada-380-mpcore-soc-ctrl";
+ reg = <0x20d20 0x6c>;
+};
diff --git a/Documentation/devicetree/bindings/arm/atmel-pmc.txt b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
index 389bed5056e8..795cc78543fe 100644
--- a/Documentation/devicetree/bindings/arm/atmel-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
@@ -1,7 +1,10 @@
* Power Management Controller (PMC)
Required properties:
-- compatible: Should be "atmel,at91rm9200-pmc"
+- compatible: Should be "atmel,<chip>-pmc".
+ <chip> can be: at91rm9200, at91sam9260, at91sam9g45, at91sam9n12,
+ at91sam9x5, sama5d3
+
- reg: Should contain PMC registers location and length
Examples:
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method
new file mode 100644
index 000000000000..8240c023e202
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method
@@ -0,0 +1,36 @@
+Broadcom Kona Family CPU Enable Method
+--------------------------------------
+This binding defines the enable method used for starting secondary
+CPUs in the following Broadcom SoCs:
+ BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
+
+The enable method is specified by defining the following required
+properties in the "cpus" device tree node:
+ - enable-method = "brcm,bcm11351-cpu-method";
+ - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register used to request the ROM holding pen
+code release a secondary CPU. The value written to the register is
+formed by encoding the target CPU id into the low bits of the
+physical start address it should jump to.
+
+Example:
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "brcm,bcm11351-cpu-method";
+ secondary-boot-reg = <0x3500417c>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
new file mode 100644
index 000000000000..3c436cc4f35d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
@@ -0,0 +1,95 @@
+ARM Broadcom STB platforms Device Tree Bindings
+-----------------------------------------------
+Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants)
+SoC shall have the following DT organization:
+
+Required root node properties:
+ - compatible: "brcm,bcm<chip_id>", "brcm,brcmstb"
+
+example:
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "Broadcom STB (bcm7445)";
+ compatible = "brcm,bcm7445", "brcm,brcmstb";
+
+Further, syscon nodes that map platform-specific registers used for general
+system control is required:
+
+ - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
+ - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
+ - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
+
+example:
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0x00 0xf0000000 0x1000000>;
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7445-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x51c>;
+ };
+
+ hif_cpubiuctrl: syscon@3e2400 {
+ compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
+ reg = <0x3e2400 0x5b4>;
+ };
+
+ hif_continuation: syscon@452000 {
+ compatible = "brcm,bcm7445-hif-continuation", "syscon";
+ reg = <0x452000 0x100>;
+ };
+ };
+
+Lastly, nodes that allow for support of SMP initialization and reboot are
+required:
+
+smpboot
+-------
+Required properties:
+
+ - compatible
+ The string "brcm,brcmstb-smpboot".
+
+ - syscon-cpu
+ A phandle / integer array property which lets the BSP know the location
+ of certain CPU power-on registers.
+
+ The layout of the property is as follows:
+ o a phandle to the "hif_cpubiuctrl" syscon node
+ o offset to the base CPU power zone register
+ o offset to the base CPU reset register
+
+ - syscon-cont
+ A phandle pointing to the syscon node which describes the CPU boot
+ continuation registers.
+ o a phandle to the "hif_continuation" syscon node
+
+example:
+ smpboot {
+ compatible = "brcm,brcmstb-smpboot";
+ syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+ syscon-cont = <&hif_continuation>;
+ };
+
+reboot
+-------
+Required properties
+
+ - compatible
+ The string property "brcm,brcmstb-reboot".
+
+ - syscon
+ A phandle / integer array that points to the syscon node which describes
+ the general system reset registers.
+ o a phandle to "sun_top_ctrl"
+ o offset to the "reset source enable" register
+ o offset to the "software master reset" register
+
+example:
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp
new file mode 100644
index 000000000000..cd236b727e2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp
@@ -0,0 +1,41 @@
+========================================================
+Secondary CPU enable-method "marvell,berlin-smp" binding
+========================================================
+
+This document describes the "marvell,berlin-smp" method for enabling secondary
+CPUs. To apply to all CPUs, a single "marvell,berlin-smp" enable method should
+be defined in the "cpus" node.
+
+Enable method name: "marvell,berlin-smp"
+Compatible machines: "marvell,berlin2" and "marvell,berlin2q"
+Compatible CPUs: "marvell,pj4b" and "arm,cortex-a9"
+Related properties: (none)
+
+Note:
+This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
+"marvell,berlin-cpu-ctrl"[1].
+
+Example:
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "marvell,berlin-smp";
+
+ cpu@0 {
+ compatible = "marvell,pj4b";
+ device_type = "cpu";
+ next-level-cache = <&l2>;
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "marvell,pj4b";
+ device_type = "cpu";
+ next-level-cache = <&l2>;
+ reg = <1>;
+ };
+ };
+
+--
+[1] arm/marvell,berlin.txt
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 1fe72a0778cd..298e2f6b33c6 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -152,7 +152,9 @@ nodes to be present and contain the properties described below.
"arm,cortex-a7"
"arm,cortex-a8"
"arm,cortex-a9"
+ "arm,cortex-a12"
"arm,cortex-a15"
+ "arm,cortex-a17"
"arm,cortex-a53"
"arm,cortex-a57"
"arm,cortex-m0"
@@ -163,6 +165,7 @@ nodes to be present and contain the properties described below.
"arm,cortex-r4"
"arm,cortex-r5"
"arm,cortex-r7"
+ "brcm,brahma-b15"
"faraday,fa526"
"intel,sa110"
"intel,sa1100"
@@ -184,6 +187,7 @@ nodes to be present and contain the properties described below.
can be one of:
"allwinner,sun6i-a31"
"arm,psci"
+ "brcm,brahma-b15"
"marvell,armada-375-smp"
"marvell,armada-380-smp"
"marvell,armada-xp-smp"
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index 5573c08d3180..c7d2fa156678 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -16,6 +16,7 @@ Main node required properties:
"arm,cortex-a9-gic"
"arm,cortex-a7-gic"
"arm,arm11mp-gic"
+ "brcm,brahma-b15-gic"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The type shall be a <u32> and the value shall be 3.
diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
index 94013a9a8769..904de5781f44 100644
--- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
@@ -24,6 +24,22 @@ SoC and board used. Currently known SoC compatibles are:
...
}
+* Marvell Berlin CPU control bindings
+
+CPU control register allows various operations on CPUs, like resetting them
+independently.
+
+Required properties:
+- compatible: should be "marvell,berlin-cpu-ctrl"
+- reg: address and length of the register set
+
+Example:
+
+cpu-ctrl@f7dd0000 {
+ compatible = "marvell,berlin-cpu-ctrl";
+ reg = <0xf7dd0000 0x10000>;
+};
+
* Marvell Berlin2 chip control binding
Marvell Berlin SoCs have a chip control register set providing several
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index d22b216f5d23..0edc90305dfe 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -129,6 +129,9 @@ Boards:
- AM437x GP EVM
compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43"
+- AM437x SK EVM: AM437x StarterKit Evaluation Module
+ compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43"
+
- DRA742 EVM: Software Development Board for DRA742
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
new file mode 100644
index 000000000000..79074dac684a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -0,0 +1,65 @@
+OMAP PRCM bindings
+
+Power Reset and Clock Manager lists the device clocks and clockdomains under
+a DT hierarchy. Each TI SoC can have multiple PRCM entities listed for it,
+each describing one module and the clock hierarchy under it. see [1] for
+documentation about the individual clock/clockdomain nodes.
+
+[1] Documentation/devicetree/bindings/clock/ti/*
+
+Required properties:
+- compatible: Must be one of:
+ "ti,am3-prcm"
+ "ti,am3-scrm"
+ "ti,am4-prcm"
+ "ti,am4-scrm"
+ "ti,omap2-prcm"
+ "ti,omap2-scrm"
+ "ti,omap3-prm"
+ "ti,omap3-cm"
+ "ti,omap3-scrm"
+ "ti,omap4-cm1"
+ "ti,omap4-prm"
+ "ti,omap4-cm2"
+ "ti,omap4-scrm"
+ "ti,omap5-prm"
+ "ti,omap5-cm-core-aon"
+ "ti,omap5-scrm"
+ "ti,omap5-cm-core"
+ "ti,dra7-prm"
+ "ti,dra7-cm-core-aon"
+ "ti,dra7-cm-core"
+- reg: Contains PRCM module register address range
+ (base address and length)
+- clocks: clocks for this module
+- clockdomains: clockdomains for this module
+
+Example:
+
+cm: cm@48004000 {
+ compatible = "ti,omap3-cm";
+ reg = <0x48004000 0x4000>;
+
+ cm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_clockdomains: clockdomains {
+ };
+}
+
+&cm_clocks {
+ omap2_32k_fck: omap_32k_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+};
+
+&cm_clockdomains {
+ core_l3_clkdm: core_l3_clkdm {
+ compatible = "ti,clockdomain";
+ clocks = <&sdrc_ick>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
index f9865e77e0b0..1e1979b229ff 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
@@ -7,6 +7,8 @@ Properties:
- "samsung,exynos4212-pmu" - for Exynos4212 SoC,
- "samsung,exynos4412-pmu" - for Exynos4412 SoC,
- "samsung,exynos5250-pmu" - for Exynos5250 SoC,
+ - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
+ - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
- "samsung,exynos5420-pmu" - for Exynos5420 SoC.
second value must be always "syscon".
diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt
index 558ed4b4ef39..73278c6d2dc3 100644
--- a/Documentation/devicetree/bindings/arm/tegra.txt
+++ b/Documentation/devicetree/bindings/arm/tegra.txt
@@ -30,6 +30,8 @@ board-specific compatible values:
nvidia,seaboard
nvidia,ventana
nvidia,whistler
+ toradex,apalis_t30
+ toradex,apalis_t30-eval
toradex,colibri_t20-512
toradex,iris
diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt
index 6f1ed830b4f7..1f7995357888 100644
--- a/Documentation/devicetree/bindings/arm/xilinx.txt
+++ b/Documentation/devicetree/bindings/arm/xilinx.txt
@@ -1,7 +1,7 @@
-Xilinx Zynq EP107 Emulation Platform board
+Xilinx Zynq Platforms Device Tree Bindings
-This board is an emulation platform for the Zynq product which is
-based on an ARM Cortex A9 processor.
+Boards with Zynq-7000 SOC based on an ARM Cortex A9 processor
+shall have the following properties.
Required root node properties:
- - compatible = "xlnx,zynq-ep107";
+ - compatible = "xlnx,zynq-7000";
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
new file mode 100644
index 000000000000..23bfe8e1f7cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
@@ -0,0 +1,43 @@
+NVIDIA GK20A Graphics Processing Unit
+
+Required properties:
+- compatible: "nvidia,<chip>-<gpu>"
+ Currently recognized values:
+ - nvidia,tegra124-gk20a
+- reg: Physical base address and length of the controller's registers.
+ Must contain two entries:
+ - first entry for bar0
+ - second entry for bar1
+- interrupts: Must contain an entry for each entry in interrupt-names.
+ See ../interrupt-controller/interrupts.txt for details.
+- interrupt-names: Must include the following entries:
+ - stall
+ - nonstall
+- vdd-supply: regulator for supply voltage.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - gpu
+ - pwr
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - gpu
+
+Example:
+
+ gpu@0,57000000 {
+ compatible = "nvidia,gk20a";
+ reg = <0x0 0x57000000 0x0 0x01000000>,
+ <0x0 0x58000000 0x0 0x01000000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "stall", "nonstall";
+ vdd-supply = <&vdd_gpu>;
+ clocks = <&tegra_car TEGRA124_CLK_GPU>,
+ <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+ clock-names = "gpu", "pwr";
+ resets = <&tegra_car 184>;
+ reset-names = "gpu";
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
new file mode 100644
index 000000000000..2f9c0bd66457
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
@@ -0,0 +1,127 @@
+Device tree binding for NVIDIA Tegra XUSB pad controller
+========================================================
+
+The Tegra XUSB pad controller manages a set of lanes, each of which can be
+assigned to one out of a set of different pads. Some of these pads have an
+associated PHY that must be powered up before the pad can be used.
+
+This document defines the device-specific binding for the XUSB pad controller.
+
+Refer to pinctrl-bindings.txt in this directory for generic information about
+pin controller device tree bindings and ../phy/phy-bindings.txt for details on
+how to describe and reference PHYs in device trees.
+
+Required properties:
+--------------------
+- compatible: should be "nvidia,tegra124-xusb-padctl"
+- reg: Physical base address and length of the controller's registers.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - padctl
+- #phy-cells: Should be 1. The specifier is the index of the PHY to reference.
+ See <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> for the list of valid values.
+
+Lane muxing:
+------------
+
+Child nodes contain the pinmux configurations following the conventions from
+the pinctrl-bindings.txt document. Typically a single, static configuration is
+given and applied at boot time.
+
+Each subnode describes groups of lanes along with parameters and pads that
+they should be assigned to. The name of these subnodes is not important. All
+subnodes should be parsed solely based on their content.
+
+Each subnode only applies the parameters that are explicitly listed. In other
+words, if a subnode that lists a function but no pin configuration parameters
+implies no information about any pin configuration parameters. Similarly, a
+subnode that describes only an IDDQ parameter implies no information about
+what function the pins are assigned to. For this reason even seemingly boolean
+values are actually tristates in this binding: unspecified, off or on.
+Unspecified is represented as an absent property, and off/on are represented
+as integer values 0 and 1.
+
+Required properties:
+- nvidia,lanes: An array of strings. Each string is the name of a lane.
+
+Optional properties:
+- nvidia,function: A string that is the name of the function (pad) that the
+ pin or group should be assigned to. Valid values for function names are
+ listed below.
+- nvidia,iddq: Enables IDDQ mode of the lane. (0: no, 1: yes)
+
+Note that not all of these properties are valid for all lanes. Lanes can be
+divided into three groups:
+
+ - otg-0, otg-1, otg-2:
+
+ Valid functions for this group are: "snps", "xusb", "uart", "rsvd".
+
+ The nvidia,iddq property does not apply to this group.
+
+ - ulpi-0, hsic-0, hsic-1:
+
+ Valid functions for this group are: "snps", "xusb".
+
+ The nvidia,iddq property does not apply to this group.
+
+ - pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, sata-0:
+
+ Valid functions for this group are: "pcie", "usb3", "sata", "rsvd".
+
+
+Example:
+========
+
+SoC file extract:
+-----------------
+
+ padctl@0,7009f000 {
+ compatible = "nvidia,tegra124-xusb-padctl";
+ reg = <0x0 0x7009f000 0x0 0x1000>;
+ resets = <&tegra_car 142>;
+ reset-names = "padctl";
+
+ #phy-cells = <1>;
+ };
+
+Board file extract:
+-------------------
+
+ pcie-controller@0,01003000 {
+ ...
+
+ phys = <&padctl 0>;
+ phy-names = "pcie";
+
+ ...
+ };
+
+ ...
+
+ padctl: padctl@0,7009f000 {
+ pinctrl-0 = <&padctl_default>;
+ pinctrl-names = "default";
+
+ padctl_default: pinmux {
+ usb3 {
+ nvidia,lanes = "pcie-0", "pcie-1";
+ nvidia,function = "usb3";
+ nvidia,iddq = <0>;
+ };
+
+ pcie {
+ nvidia,lanes = "pcie-2", "pcie-3",
+ "pcie-4";
+ nvidia,function = "pcie";
+ nvidia,iddq = <0>;
+ };
+
+ sata {
+ nvidia,lanes = "sata-0";
+ nvidia,function = "sata";
+ nvidia,iddq = <0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.txt b/Documentation/devicetree/bindings/serial/cdns,uart.txt
new file mode 100644
index 000000000000..a3eb154c32ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.txt
@@ -0,0 +1,20 @@
+Binding for Cadence UART Controller
+
+Required properties:
+- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps"
+- reg: Should contain UART controller registers location and length.
+- interrupts: Should contain UART controller interrupts.
+- clocks: Must contain phandles to the UART clocks
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Tuple to identify input clocks, must contain "uart_clk" and "pclk"
+ See ../clocks/clock-bindings.txt for details.
+
+
+Example:
+ uart@e0000000 {
+ compatible = "cdns,uart-r1p8";
+ clocks = <&clkc 23>, <&clkc 40>;
+ clock-names = "uart_clk", "pclk";
+ reg = <0xE0000000 0x1000>;
+ interrupts = <0 27 4>;
+ };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index d415b38ec8ca..3dc9188ce023 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -6,6 +6,7 @@ using them to avoid name-space collisions.
abilis Abilis Systems
active-semi Active-Semi International Inc
ad Avionic Design GmbH
+adapteva Adapteva, Inc.
adi Analog Devices, Inc.
aeroflexgaisler Aeroflex Gaisler AB
ak Asahi Kasei Corp.
@@ -72,6 +73,7 @@ karo Ka-Ro electronics GmbH
keymile Keymile GmbH
lacie LaCie
lantiq Lantiq Semiconductor
+lenovo Lenovo Group Ltd.
lg LG Corporation
linux Linux-specific binding
lsi LSI Corp. (LSI Logic)
@@ -124,6 +126,7 @@ sii Seiko Instruments, Inc.
sirf SiRF Technology, Inc.
smsc Standard Microsystems Corporation
snps Synopsys, Inc.
+solidrun SolidRun
spansion Spansion Inc.
st STMicroelectronics
ste ST-Ericsson