summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-11-06 11:50:28 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2020-11-06 11:50:28 -0800
commit41f16530241405819ae5644b6544965ab124bbda (patch)
tree446624068678a8c590025c19ee42976356046213 /Documentation
parent521b619acdc8f1f5acdac15b84f81fd9515b2aff (diff)
parent2bcbf42add911ef63a6d90e92001dc2bcb053e68 (diff)
Merge tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.10-rc3, including fixes from wireless, can, and netfilter subtrees. Current merge window - bugs in new features: - can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode Previous releases - regressions: - mac80211: - don't require VHT elements for HE on 2.4 GHz - fix regression where EAPOL frames were sent in plaintext - netfilter: - ipset: Update byte and packet counters regardless of whether they match - ip_tunnel: fix over-mtu packet send by allowing fragmenting even if inner packet has IP_DF (don't fragment) set in its header (when TUNNEL_DONT_FRAGMENT flag is not set on the tunnel dev) - net: fec: fix MDIO probing for some FEC hardware blocks - ip6_tunnel: set inner ipproto before ip6_tnl_encap to un-break gso support - sctp: Fix COMM_LOST/CANT_STR_ASSOC err reporting on big-endian platforms, sparse-related fix used the wrong integer size Previous releases - always broken: - netfilter: use actual socket sk rather than skb sk when routing harder - r8169: work around short packet hw bug on RTL8125 by padding frames - net: ethernet: ti: cpsw: disable PTPv1 hw timestamping advertisement, the hardware does not support it - chelsio/chtls: fix always leaking ctrl_skb and another leak caused by a race condition - fix drivers incorrectly writing into skbs on TX: - cadence: force nonlinear buffers to be cloned - gianfar: Account for Tx PTP timestamp in the skb headroom - gianfar: Replace skb_realloc_headroom with skb_cow_head for PTP - can: flexcan: - remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A - add ECC initialization for VF610 and LX2160A - flexcan_remove(): disable wakeup completely - can: fix packet echo functionality: - peak_canfd: fix echo management when loopback is on - make sure skbs are not freed in IRQ context in case they need to be dropped - always clone the skbs to make sure they have a reference on the socket, and prevent it from disappearing - fix real payload length return value for RTR frames - can: j1939: return failure on bind if netdev is down, rather than waiting indefinitely Misc: - IPv6: reply ICMP error if the first fragment don't include all headers to improve compliance with RFC 8200" * tag 'net-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) ionic: check port ptr before use r8169: work around short packet hw bug on RTL8125 net: openvswitch: silence suspicious RCU usage warning chelsio/chtls: fix always leaking ctrl_skb chelsio/chtls: fix memory leaks caused by a race can: flexcan: flexcan_remove(): disable wakeup completely can: flexcan: add ECC initialization for VF610 can: flexcan: add ECC initialization for LX2160A can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A can: mcp251xfd: remove unneeded break can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping can: peak_usb: add range checking in decode operations can: xilinx_can: handle failure cases of pm_runtime_get_sync can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path can: isotp: padlen(): make const array static, makes object smaller can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode can: isotp: Explain PDU in CAN_ISOTP help text ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/net/can/can-controller.yaml18
-rw-r--r--Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml135
-rw-r--r--Documentation/devicetree/bindings/net/can/fsl-flexcan.txt57
-rw-r--r--Documentation/networking/j1939.rst120
4 files changed, 213 insertions, 117 deletions
diff --git a/Documentation/devicetree/bindings/net/can/can-controller.yaml b/Documentation/devicetree/bindings/net/can/can-controller.yaml
new file mode 100644
index 000000000000..9cf2ae097156
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/can-controller.yaml
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/can-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CAN Controller Generic Binding
+
+maintainers:
+ - Marc Kleine-Budde <mkl@pengutronix.de>
+
+properties:
+ $nodename:
+ pattern: "^can(@.*)?$"
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
new file mode 100644
index 000000000000..43df15ba8fa4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+ Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
+
+maintainers:
+ - Marc Kleine-Budde <mkl@pengutronix.de>
+
+allOf:
+ - $ref: can-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx8qm-flexcan
+ - fsl,imx8mp-flexcan
+ - fsl,imx6q-flexcan
+ - fsl,imx53-flexcan
+ - fsl,imx35-flexcan
+ - fsl,imx28-flexcan
+ - fsl,imx25-flexcan
+ - fsl,p1010-flexcan
+ - fsl,vf610-flexcan
+ - fsl,ls1021ar2-flexcan
+ - fsl,lx2160ar1-flexcan
+ - items:
+ - enum:
+ - fsl,imx7d-flexcan
+ - fsl,imx6ul-flexcan
+ - fsl,imx6sx-flexcan
+ - const: fsl,imx6q-flexcan
+ - items:
+ - enum:
+ - fsl,ls1028ar1-flexcan
+ - const: fsl,lx2160ar1-flexcan
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: per
+
+ clock-frequency:
+ description: |
+ The oscillator frequency driving the flexcan device, filled in by the
+ boot loader. This property should only be used the used operating system
+ doesn't support the clocks and clock-names property.
+
+ xceiver-supply:
+ description: Regulator that powers the CAN transceiver.
+
+ big-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ This means the registers of FlexCAN controller are big endian. This is
+ optional property.i.e. if this property is not present in device tree
+ node then controller is assumed to be little endian. If this property is
+ present then controller is assumed to be big endian.
+
+ fsl,stop-mode:
+ description: |
+ Register bits of stop mode control.
+
+ The format should be as follows:
+ <gpr req_gpr req_bit>
+ gpr is the phandle to general purpose register node.
+ req_gpr is the gpr register offset of CAN stop request.
+ req_bit is the bit offset of CAN stop request.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - description: The 'gpr' is the phandle to general purpose register node.
+ - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+ maximum: 0xff
+ - description: The 'req_bit' is the bit offset of CAN stop request.
+ maximum: 0x1f
+
+ fsl,clk-source:
+ description: |
+ Select the clock source to the CAN Protocol Engine (PE). It's SoC
+ implementation dependent. Refer to RM for detailed definition. If this
+ property is not set in device tree node then driver selects clock source 1
+ by default.
+ 0: clock source 0 (oscillator clock)
+ 1: clock source 1 (peripheral clock)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 1
+ minimum: 0
+ maximum: 1
+
+ wakeup-source:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enable CAN remote wakeup.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ can@1c000 {
+ compatible = "fsl,p1010-flexcan";
+ reg = <0x1c000 0x1000>;
+ interrupts = <48 0x2>;
+ interrupt-parent = <&mpic>;
+ clock-frequency = <200000000>;
+ fsl,clk-source = <0>;
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ can@2090000 {
+ compatible = "fsl,imx6q-flexcan";
+ reg = <0x02090000 0x4000>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks 1>, <&clks 2>;
+ clock-names = "ipg", "per";
+ fsl,stop-mode = <&gpr 0x34 28>;
+ };
diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
deleted file mode 100644
index e10b6eb955e1..000000000000
--- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC).
-
-Required properties:
-
-- compatible : Should be "fsl,<processor>-flexcan"
-
- where <processor> is imx8qm, imx6q, imx28, imx53, imx35, imx25, p1010,
- vf610, ls1021ar2, lx2160ar1, ls1028ar1.
-
- The ls1028ar1 must be followed by lx2160ar1, e.g.
- - "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"
-
- An implementation should also claim any of the following compatibles
- that it is fully backwards compatible with:
-
- - fsl,p1010-flexcan
-
-- reg : Offset and length of the register set for this device
-- interrupts : Interrupt tuple for this device
-
-Optional properties:
-
-- clock-frequency : The oscillator frequency driving the flexcan device
-
-- xceiver-supply: Regulator that powers the CAN transceiver
-
-- big-endian: This means the registers of FlexCAN controller are big endian.
- This is optional property.i.e. if this property is not present in
- device tree node then controller is assumed to be little endian.
- if this property is present then controller is assumed to be big
- endian.
-
-- fsl,stop-mode: register bits of stop mode control, the format is
- <&gpr req_gpr req_bit>.
- gpr is the phandle to general purpose register node.
- req_gpr is the gpr register offset of CAN stop request.
- req_bit is the bit offset of CAN stop request.
-
-- fsl,clk-source: Select the clock source to the CAN Protocol Engine (PE).
- It's SoC Implementation dependent. Refer to RM for detailed
- definition. If this property is not set in device tree node
- then driver selects clock source 1 by default.
- 0: clock source 0 (oscillator clock)
- 1: clock source 1 (peripheral clock)
-
-- wakeup-source: enable CAN remote wakeup
-
-Example:
-
- can@1c000 {
- compatible = "fsl,p1010-flexcan";
- reg = <0x1c000 0x1000>;
- interrupts = <48 0x2>;
- interrupt-parent = <&mpic>;
- clock-frequency = <200000000>; // filled in by bootloader
- fsl,clk-source = <0>; // select clock source 0 for PE
- };
diff --git a/Documentation/networking/j1939.rst b/Documentation/networking/j1939.rst
index f5be243d250a..0a4b73b03b99 100644
--- a/Documentation/networking/j1939.rst
+++ b/Documentation/networking/j1939.rst
@@ -10,9 +10,9 @@ Overview / What Is J1939
SAE J1939 defines a higher layer protocol on CAN. It implements a more
sophisticated addressing scheme and extends the maximum packet size above 8
bytes. Several derived specifications exist, which differ from the original
-J1939 on the application level, like MilCAN A, NMEA2000 and especially
+J1939 on the application level, like MilCAN A, NMEA2000, and especially
ISO-11783 (ISOBUS). This last one specifies the so-called ETP (Extended
-Transport Protocol) which is has been included in this implementation. This
+Transport Protocol), which has been included in this implementation. This
results in a maximum packet size of ((2 ^ 24) - 1) * 7 bytes == 111 MiB.
Specifications used
@@ -32,15 +32,15 @@ sockets, we found some reasons to justify a kernel implementation for the
addressing and transport methods used by J1939.
* **Addressing:** when a process on an ECU communicates via J1939, it should
- not necessarily know its source address. Although at least one process per
+ not necessarily know its source address. Although, at least one process per
ECU should know the source address. Other processes should be able to reuse
that address. This way, address parameters for different processes
cooperating for the same ECU, are not duplicated. This way of working is
- closely related to the UNIX concept where programs do just one thing, and do
+ closely related to the UNIX concept, where programs do just one thing and do
it well.
* **Dynamic addressing:** Address Claiming in J1939 is time critical.
- Furthermore data transport should be handled properly during the address
+ Furthermore, data transport should be handled properly during the address
negotiation. Putting this functionality in the kernel eliminates it as a
requirement for _every_ user space process that communicates via J1939. This
results in a consistent J1939 bus with proper addressing.
@@ -58,7 +58,7 @@ Therefore, these parts are left to user space.
The J1939 sockets operate on CAN network devices (see SocketCAN). Any J1939
user space library operating on CAN raw sockets will still operate properly.
-Since such library does not communicate with the in-kernel implementation, care
+Since such a library does not communicate with the in-kernel implementation, care
must be taken that these two do not interfere. In practice, this means they
cannot share ECU addresses. A single ECU (or virtual ECU) address is used by
the library exclusively, or by the in-kernel system exclusively.
@@ -77,13 +77,13 @@ is composed as follows:
8 bits : PS (PDU Specific)
In J1939-21 distinction is made between PDU1 format (where PF < 240) and PDU2
-format (where PF >= 240). Furthermore, when using PDU2 format, the PS-field
+format (where PF >= 240). Furthermore, when using the PDU2 format, the PS-field
contains a so-called Group Extension, which is part of the PGN. When using PDU2
format, the Group Extension is set in the PS-field.
On the other hand, when using PDU1 format, the PS-field contains a so-called
Destination Address, which is _not_ part of the PGN. When communicating a PGN
-from user space to kernel (or visa versa) and PDU2 format is used, the PS-field
+from user space to kernel (or vice versa) and PDU2 format is used, the PS-field
of the PGN shall be set to zero. The Destination Address shall be set
elsewhere.
@@ -96,15 +96,15 @@ Addressing
Both static and dynamic addressing methods can be used.
-For static addresses, no extra checks are made by the kernel, and provided
+For static addresses, no extra checks are made by the kernel and provided
addresses are considered right. This responsibility is for the OEM or system
integrator.
For dynamic addressing, so-called Address Claiming, extra support is foreseen
-in the kernel. In J1939 any ECU is known by it's 64-bit NAME. At the moment of
+in the kernel. In J1939 any ECU is known by its 64-bit NAME. At the moment of
a successful address claim, the kernel keeps track of both NAME and source
address being claimed. This serves as a base for filter schemes. By default,
-packets with a destination that is not locally, will be rejected.
+packets with a destination that is not locally will be rejected.
Mixed mode packets (from a static to a dynamic address or vice versa) are
allowed. The BSD sockets define separate API calls for getting/setting the
@@ -131,31 +131,31 @@ API Calls
---------
On CAN, you first need to open a socket for communicating over a CAN network.
-To use J1939, #include <linux/can/j1939.h>. From there, <linux/can.h> will be
+To use J1939, ``#include <linux/can/j1939.h>``. From there, ``<linux/can.h>`` will be
included too. To open a socket, use:
.. code-block:: C
s = socket(PF_CAN, SOCK_DGRAM, CAN_J1939);
-J1939 does use SOCK_DGRAM sockets. In the J1939 specification, connections are
+J1939 does use ``SOCK_DGRAM`` sockets. In the J1939 specification, connections are
mentioned in the context of transport protocol sessions. These still deliver
-packets to the other end (using several CAN packets). SOCK_STREAM is not
+packets to the other end (using several CAN packets). ``SOCK_STREAM`` is not
supported.
-After the successful creation of the socket, you would normally use the bind(2)
-and/or connect(2) system call to bind the socket to a CAN interface. After
-binding and/or connecting the socket, you can read(2) and write(2) from/to the
-socket or use send(2), sendto(2), sendmsg(2) and the recv*() counterpart
+After the successful creation of the socket, you would normally use the ``bind(2)``
+and/or ``connect(2)`` system call to bind the socket to a CAN interface. After
+binding and/or connecting the socket, you can ``read(2)`` and ``write(2)`` from/to the
+socket or use ``send(2)``, ``sendto(2)``, ``sendmsg(2)`` and the ``recv*()`` counterpart
operations on the socket as usual. There are also J1939 specific socket options
described below.
-In order to send data, a bind(2) must have been successful. bind(2) assigns a
+In order to send data, a ``bind(2)`` must have been successful. ``bind(2)`` assigns a
local address to a socket.
-Different from CAN is that the payload data is just the data that get send,
-without it's header info. The header info is derived from the sockaddr supplied
-to bind(2), connect(2), sendto(2) and recvfrom(2). A write(2) with size 4 will
+Different from CAN is that the payload data is just the data that get sends,
+without its header info. The header info is derived from the sockaddr supplied
+to ``bind(2)``, ``connect(2)``, ``sendto(2)`` and ``recvfrom(2)``. A ``write(2)`` with size 4 will
result in a packet with 4 bytes.
The sockaddr structure has extensions for use with J1939 as specified below:
@@ -180,47 +180,47 @@ The sockaddr structure has extensions for use with J1939 as specified below:
} can_addr;
}
-can_family & can_ifindex serve the same purpose as for other SocketCAN sockets.
+``can_family`` & ``can_ifindex`` serve the same purpose as for other SocketCAN sockets.
-can_addr.j1939.pgn specifies the PGN (max 0x3ffff). Individual bits are
+``can_addr.j1939.pgn`` specifies the PGN (max 0x3ffff). Individual bits are
specified above.
-can_addr.j1939.name contains the 64-bit J1939 NAME.
+``can_addr.j1939.name`` contains the 64-bit J1939 NAME.
-can_addr.j1939.addr contains the address.
+``can_addr.j1939.addr`` contains the address.
-The bind(2) system call assigns the local address, i.e. the source address when
-sending packages. If a PGN during bind(2) is set, it's used as a RX filter.
-I.e. only packets with a matching PGN are received. If an ADDR or NAME is set
+The ``bind(2)`` system call assigns the local address, i.e. the source address when
+sending packages. If a PGN during ``bind(2)`` is set, it's used as a RX filter.
+I.e. only packets with a matching PGN are received. If an ADDR or NAME is set
it is used as a receive filter, too. It will match the destination NAME or ADDR
of the incoming packet. The NAME filter will work only if appropriate Address
Claiming for this name was done on the CAN bus and registered/cached by the
kernel.
-On the other hand connect(2) assigns the remote address, i.e. the destination
-address. The PGN from connect(2) is used as the default PGN when sending
+On the other hand ``connect(2)`` assigns the remote address, i.e. the destination
+address. The PGN from ``connect(2)`` is used as the default PGN when sending
packets. If ADDR or NAME is set it will be used as the default destination ADDR
-or NAME. Further a set ADDR or NAME during connect(2) is used as a receive
+or NAME. Further a set ADDR or NAME during ``connect(2)`` is used as a receive
filter. It will match the source NAME or ADDR of the incoming packet.
-Both write(2) and send(2) will send a packet with local address from bind(2) and
-the remote address from connect(2). Use sendto(2) to overwrite the destination
+Both ``write(2)`` and ``send(2)`` will send a packet with local address from ``bind(2)`` and the
+remote address from ``connect(2)``. Use ``sendto(2)`` to overwrite the destination
address.
-If can_addr.j1939.name is set (!= 0) the NAME is looked up by the kernel and
-the corresponding ADDR is used. If can_addr.j1939.name is not set (== 0),
-can_addr.j1939.addr is used.
+If ``can_addr.j1939.name`` is set (!= 0) the NAME is looked up by the kernel and
+the corresponding ADDR is used. If ``can_addr.j1939.name`` is not set (== 0),
+``can_addr.j1939.addr`` is used.
When creating a socket, reasonable defaults are set. Some options can be
-modified with setsockopt(2) & getsockopt(2).
+modified with ``setsockopt(2)`` & ``getsockopt(2)``.
RX path related options:
-- SO_J1939_FILTER - configure array of filters
-- SO_J1939_PROMISC - disable filters set by bind(2) and connect(2)
+- ``SO_J1939_FILTER`` - configure array of filters
+- ``SO_J1939_PROMISC`` - disable filters set by ``bind(2)`` and ``connect(2)``
By default no broadcast packets can be send or received. To enable sending or
-receiving broadcast packets use the socket option SO_BROADCAST:
+receiving broadcast packets use the socket option ``SO_BROADCAST``:
.. code-block:: C
@@ -261,26 +261,26 @@ The following diagram illustrates the RX path:
+---------------------------+
TX path related options:
-SO_J1939_SEND_PRIO - change default send priority for the socket
+``SO_J1939_SEND_PRIO`` - change default send priority for the socket
Message Flags during send() and Related System Calls
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-send(2), sendto(2) and sendmsg(2) take a 'flags' argument. Currently
+``send(2)``, ``sendto(2)`` and ``sendmsg(2)`` take a 'flags' argument. Currently
supported flags are:
-* MSG_DONTWAIT, i.e. non-blocking operation.
+* ``MSG_DONTWAIT``, i.e. non-blocking operation.
recvmsg(2)
^^^^^^^^^^
-In most cases recvmsg(2) is needed if you want to extract more information than
-recvfrom(2) can provide. For example package priority and timestamp. The
+In most cases ``recvmsg(2)`` is needed if you want to extract more information than
+``recvfrom(2)`` can provide. For example package priority and timestamp. The
Destination Address, name and packet priority (if applicable) are attached to
-the msghdr in the recvmsg(2) call. They can be extracted using cmsg(3) macros,
-with cmsg_level == SOL_J1939 && cmsg_type == SCM_J1939_DEST_ADDR,
-SCM_J1939_DEST_NAME or SCM_J1939_PRIO. The returned data is a uint8_t for
-priority and dst_addr, and uint64_t for dst_name.
+the msghdr in the ``recvmsg(2)`` call. They can be extracted using ``cmsg(3)`` macros,
+with ``cmsg_level == SOL_J1939 && cmsg_type == SCM_J1939_DEST_ADDR``,
+``SCM_J1939_DEST_NAME`` or ``SCM_J1939_PRIO``. The returned data is a ``uint8_t`` for
+``priority`` and ``dst_addr``, and ``uint64_t`` for ``dst_name``.
.. code-block:: C
@@ -305,12 +305,12 @@ Dynamic Addressing
Distinction has to be made between using the claimed address and doing an
address claim. To use an already claimed address, one has to fill in the
-j1939.name member and provide it to bind(2). If the name had claimed an address
+``j1939.name`` member and provide it to ``bind(2)``. If the name had claimed an address
earlier, all further messages being sent will use that address. And the
-j1939.addr member will be ignored.
+``j1939.addr`` member will be ignored.
An exception on this is PGN 0x0ee00. This is the "Address Claim/Cannot Claim
-Address" message and the kernel will use the j1939.addr member for that PGN if
+Address" message and the kernel will use the ``j1939.addr`` member for that PGN if
necessary.
To claim an address following code example can be used:
@@ -371,12 +371,12 @@ NAME can send packets.
If another ECU claims the address, the kernel will mark the NAME-SA expired.
No socket bound to the NAME can send packets (other than address claims). To
-claim another address, some socket bound to NAME, must bind(2) again, but with
-only j1939.addr changed to the new SA, and must then send a valid address claim
+claim another address, some socket bound to NAME, must ``bind(2)`` again, but with
+only ``j1939.addr`` changed to the new SA, and must then send a valid address claim
packet. This restarts the state machine in the kernel (and any other
participant on the bus) for this NAME.
-can-utils also include the jacd tool, so it can be used as code example or as
+``can-utils`` also include the ``j1939acd`` tool, so it can be used as code example or as
default Address Claiming daemon.
Send Examples
@@ -403,8 +403,8 @@ Bind:
bind(sock, (struct sockaddr *)&baddr, sizeof(baddr));
-Now, the socket 'sock' is bound to the SA 0x20. Since no connect(2) was called,
-at this point we can use only sendto(2) or sendmsg(2).
+Now, the socket 'sock' is bound to the SA 0x20. Since no ``connect(2)`` was called,
+at this point we can use only ``sendto(2)`` or ``sendmsg(2)``.
Send:
@@ -414,8 +414,8 @@ Send:
.can_family = AF_CAN,
.can_addr.j1939 = {
.name = J1939_NO_NAME;
- .pgn = 0x30,
- .addr = 0x12300,
+ .addr = 0x30,
+ .pgn = 0x12300,
},
};