Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix some potentially uninitialized variables and use-after-free in
    kvaser_usb can drier, from Jimmy Assarsson.

 2) Fix leaks in qed driver, from Denis Bolotin.

 3) Socket leak in l2tp, from Xin Long.

 4) RSS context allocation fix in bnxt_en from Michael Chan.

 5) Fix cxgb4 build errors, from Ganesh Goudar.

 6) Route leaks in ipv6 when removing exceptions, from Xin Long.

 7) Memory leak in IDR allocation handling of act_pedit, from Davide
    Caratti.

 8) Use-after-free of bridge vlan stats, from Nikolay Aleksandrov.

 9) When MTU is locked, do not force DF bit on ipv4 tunnels. From
    Sabrina Dubroca.

10) When NAPI cached skb is reused, we must set it to the proper initial
    state which includes skb->pkt_type. From Eric Dumazet.

11) Lockdep and non-linear SKB handling fix in tipc from Jon Maloy.

12) Set RX queue properly in various tuntap receive paths, from Matthew
    Cover.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
  tuntap: fix multiqueue rx
  ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRF
  tipc: don't assume linear buffer when reading ancillary data
  tipc: fix lockdep warning when reinitilaizing sockets
  net-gro: reset skb->pkt_type in napi_reuse_skb()
  tc-testing: tdc.py: Guard against lack of returncode in executed command
  tc-testing: tdc.py: ignore errors when decoding stdout/stderr
  ip_tunnel: don't force DF when MTU is locked
  MAINTAINERS: Add entry for CAKE qdisc
  net: bridge: fix vlan stats use-after-free on destruction
  socket: do a generic_file_splice_read when proto_ops has no splice_read
  net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs
  Revert "net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs"
  net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs
  net/sched: act_pedit: fix memory leak when IDR allocation fails
  net: lantiq: Fix returned value in case of error in 'xrx200_probe()'
  ipv6: fix a dst leak when removing its exception
  net: mvneta: Don't advertise 2.5G modes
  drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typo
  net/mlx4: Fix UBSAN warning of signed integer overflow
  ...

3 files changed, 30 insertions, 17 deletions

diff --git a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
index 903a78da65be..3a9926f99937 100644
--- a/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
+++ b/Documentation/devicetree/bindings/net/can/holt_hi311x.txt
@@ -17,7 +17,7 @@ Example:
 		reg = <1>;
 		clocks = <&clk32m>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
 		vdd-supply = <&reg5v0>;
 		xceiver-supply = <&reg5v0>;
 	};
diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
index cc4372842bf3..9936b9ee67c3 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -5,6 +5,7 @@ Required properties:
 - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
 	      "renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
 	      "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
+	      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
 	      "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
 	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
 	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
@@ -14,26 +15,32 @@ Required properties:
 	      "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
 	      "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
 	      "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC.
+	      "renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC.
 	      "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
 	      "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
 	      compatible device.
-	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
+	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
+	      compatible device.
 	      When compatible with the generic version, nodes must list the
 	      SoC-specific version corresponding to the platform first
 	      followed by the generic version.
 
 - reg: physical base address and size of the R-Car CAN register map.
 - interrupts: interrupt specifier for the sole interrupt.
-- clocks: phandles and clock specifiers for 3 CAN clock inputs.
-- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
+- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
+	  devices.
+	  phandles and clock specifiers for 3 CAN clock inputs for every other
+	  SoC.
+- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
+	       3 clock input name strings for every other SoC: "clkp1", "clkp2",
+	       "can_clk".
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must be "default".
 
-Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796"
-compatible:
-In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock
-and can be used by both CAN and CAN FD controller at the same time. It needs to
-be scaled to maximum frequency if any of these controllers use it. This is done
+Required properties for R8A7795, R8A7796 and R8A77965:
+For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
+be used by both CAN and CAN FD controller at the same time. It needs to be
+scaled to maximum frequency if any of these controllers use it. This is done
 using the below properties:
 
 - assigned-clocks: phandle of clkp2(CANFD) clock.
@@ -42,8 +49,9 @@ using the below properties:
 Optional properties:
 - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
 			    <0x0> (default) : Peripheral clock (clkp1)
-			    <0x1> : Peripheral clock (clkp2)
-			    <0x3> : Externally input clock
+			    <0x1> : Peripheral clock (clkp2) (not supported by
+				    RZ/G2 devices)
+			    <0x3> : External input clock
 
 Example
 -------
diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt
index 605e00cdd6be..89f1302d593a 100644
--- a/Documentation/networking/rxrpc.txt
+++ b/Documentation/networking/rxrpc.txt
@@ -1056,18 +1056,23 @@ The kernel interface functions are as follows:
 
 	u32 rxrpc_kernel_check_life(struct socket *sock,
 				    struct rxrpc_call *call);
+	void rxrpc_kernel_probe_life(struct socket *sock,
+				     struct rxrpc_call *call);
 
-     This returns a number that is updated when ACKs are received from the peer
-     (notably including PING RESPONSE ACKs which we can elicit by sending PING
-     ACKs to see if the call still exists on the server).  The caller should
-     compare the numbers of two calls to see if the call is still alive after
-     waiting for a suitable interval.
+     The first function returns a number that is updated when ACKs are received
+     from the peer (notably including PING RESPONSE ACKs which we can elicit by
+     sending PING ACKs to see if the call still exists on the server).  The
+     caller should compare the numbers of two calls to see if the call is still
+     alive after waiting for a suitable interval.
 
      This allows the caller to work out if the server is still contactable and
      if the call is still alive on the server whilst waiting for the server to
      process a client operation.
 
-     This function may transmit a PING ACK.
+     The second function causes a ping ACK to be transmitted to try to provoke
+     the peer into responding, which would then cause the value returned by the
+     first function to change.  Note that this must be called in TASK_RUNNING
+     state.
 
  (*) Get reply timestamp.