Merge tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Add support for registering devices via MFD cells to Simple MFD (I2C)

  New Drivers:
   - Add support for Renesas Synchronization Management Unit (SMU)

  New Device Support:
   - Add support for N5010 to Intel M10 BMC
   - Add support for Cannon Lake to Intel LPSS ACPI
   - Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family
   - Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86

  New Functionality:
   - Add support for GPIO to Intel LPC ICH
   - Add support for Reset to Texas Instruments TPS65086

  Fix-ups:
   - Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86
   - Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru
   - Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq
   - Pass 'supplied-from' property through axp288_fuel_gauge via swnode
   - Remove unused file entry; MAINTAINERS
   - Make interrupt line optional; tps65086
   - Rename db8500-cpuidle driver symbol; db8500-prcmu
   - Remove support for unused hardware; tqmx86
   - Provide a standard LPC clock frequency for unknown boards; tqmx86
   - Remove unused code; ti_am335x_tscadc
   - Use of_iomap() instead of ioremap(); syscon

  Bug Fixes:
   - Clear GPIO IRQ resource flags when no IRQ is set; tqmx86
   - Fix incorrect/misleading frequencies; db8500-prcmu
   - Mitigate namespace clash with other GPIOBASE users"

* tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits)
  mfd: lpc_sch: Rename GPIOBASE to prevent build error
  mfd: syscon: Use of_iomap() instead of ioremap()
  dt-bindings: mfd: Add Broadcom CRU
  mfd: ti_am335x_tscadc: Delete superfluous error message
  mfd: tqmx86: Assume 24MHz LPC clock for unknown boards
  mfd: tqmx86: Add support for TQ-Systems DMI IDs
  mfd: tqmx86: Add support for TQMx110EB and TQMxE40x
  mfd: tqmx86: Fix typo in "platform"
  mfd: tqmx86: Remove incorrect TQMx90UC board ID
  mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set
  mfd: simple-mfd-i2c: Add support for registering devices via MFD cells
  mfd/cpuidle: ux500: Rename driver symbol
  mfd: tps65086: Add cell entry for reset driver
  mfd: tps65086: Make interrupt line optional
  dt-bindings: mfd: Convert tps65086.txt to YAML
  MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming
  mfd: db8500-prcmu: Handle missing FW variant
  mfd: db8500-prcmu: Rename register header
  mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell
  mfd: Don't use irq_create_mapping() to resolve a mapping
  ...

6 files changed, 225 insertions, 58 deletions

diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index 4991a6415796..2b53dcc0ea61 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -26,10 +26,10 @@ Required properties:
     * "x-powers,axp803"
     * "x-powers,axp806"
     * "x-powers,axp805", "x-powers,axp806"
+    * "x-powers,axp305", "x-powers,axp805", "x-powers,axp806"
     * "x-powers,axp809"
     * "x-powers,axp813"
 - reg: The I2C slave address or RSB hardware address for the AXP chip
-- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
 - interrupt-controller: The PMIC has its own internal IRQs
 - #interrupt-cells: Should be set to 1
 
@@ -43,6 +43,7 @@ more information:
 			AXP20x/LDO3: software-based implementation
 
 Optional properties:
+- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
 - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz
 		      AXP152/20X: range:  750-1875, Default: 1.5 MHz
 		      AXP22X/8XX: range: 1800-4050, Default: 3   MHz
diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
new file mode 100644
index 000000000000..fc1317ab3226
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom CRU
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Broadcom CRU ("Clock and Reset Unit" or "Central Resource Unit") is a hardware
+  block grouping smaller blocks. On Broadcom Northstar platform it contains e.g.
+  clocks, pinctrl, USB PHY and thermal.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,ns-cru
+      - const: simple-mfd
+
+  reg:
+    description: CRU registers
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  pinctrl:
+    $ref: ../pinctrl/brcm,ns-pinmux.yaml
+
+patternProperties:
+  '^clock-controller@[a-f0-9]+$':
+    $ref: ../clock/brcm,iproc-clocks.yaml
+
+  '^thermal@[a-f0-9]+$':
+    $ref: ../thermal/brcm,ns-thermal.yaml
+
+additionalProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    cru-bus@1800c100 {
+        compatible = "brcm,ns-cru", "simple-mfd";
+        reg = <0x1800c100 0x1d0>;
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        clock-controller@100 {
+            #clock-cells = <1>;
+            compatible = "brcm,nsp-lcpll0";
+            reg = <0x100 0x14>;
+            clocks = <&osc>;
+            clock-output-names = "lcpll0", "pcie_phy", "sdio", "ddr_phy";
+        };
+
+        clock-controller@140 {
+            #clock-cells = <1>;
+            compatible = "brcm,nsp-genpll";
+            reg = <0x140 0x24>;
+            clocks = <&osc>;
+            clock-output-names = "genpll", "phy", "ethernetclk", "usbclk",
+                                 "iprocfast", "sata1", "sata2";
+        };
+
+        pinctrl {
+            compatible = "brcm,bcm4708-pinmux";
+            offset = <0x1c0>;
+        };
+
+        thermal@2c0 {
+            compatible = "brcm,ns-thermal";
+            reg = <0x2c0 0x10>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index 779936850ee0..ec3138c1bbfc 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -53,7 +53,9 @@ patternProperties:
 
     properties:
       compatible:
-        const: qcom,pm8008-gpio
+        items:
+          - const: qcom,pm8008-gpio
+          - const: qcom,spmi-gpio
 
       reg:
         description: Peripheral address of one of the two GPIO peripherals.
@@ -61,6 +63,9 @@ patternProperties:
 
       gpio-controller: true
 
+      gpio-ranges:
+        maxItems: 1
+
       interrupt-controller: true
 
       "#interrupt-cells":
@@ -75,6 +80,7 @@ patternProperties:
       - gpio-controller
       - interrupt-controller
       - "#gpio-cells"
+      - gpio-ranges
       - "#interrupt-cells"
 
     additionalProperties: false
@@ -107,10 +113,11 @@ examples:
         interrupt-parent = <&tlmm>;
         interrupts = <32 IRQ_TYPE_EDGE_RISING>;
 
-        gpio@c000 {
-          compatible = "qcom,pm8008-gpio";
+        pm8008_gpios: gpio@c000 {
+          compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
           reg = <0xc000>;
           gpio-controller;
+          gpio-ranges = <&pm8008_gpios 0 0 2>;
           #gpio-cells = <2>;
           interrupt-controller;
           #interrupt-cells = <2>;
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index f14ae6da0068..abe3fd817e0b 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -45,9 +45,12 @@ properties:
               - microchip,sparx5-cpu-syscon
               - mstar,msc313-pmsleep
               - rockchip,px30-qos
+              - rockchip,rk3036-qos
               - rockchip,rk3066-qos
+              - rockchip,rk3228-qos
               - rockchip,rk3288-qos
               - rockchip,rk3399-qos
+              - rockchip,rk3568-qos
               - samsung,exynos3-sysreg
               - samsung,exynos4-sysreg
               - samsung,exynos5-sysreg
diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
new file mode 100644
index 000000000000..6aeedda3be15
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,tps65086.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65086 Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: ti,tps65086
+
+  reg:
+    const: 0x5e
+    description: I2C slave address
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: |
+      The first cell is the IRQ number. The second cell is the flags,
+      encoded as trigger masks from ../interrupt-controller/interrupts.txt.
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description: |
+      The first cell is the pin number and the second cell is used to specify
+      flags.  See ../gpio/gpio.txt for more information.
+
+  regulators:
+    type: object
+    description: |
+      List of child nodes that specify the regulator initialization data.
+      Child nodes must be named after their hardware counterparts:
+      buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt.
+      Each child node is defined using the standard binding for regulators and
+      the optional regulator properties defined below.
+
+    patternProperties:
+      "^buck[1-6]$":
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          ti,regulator-step-size-25mv:
+            type: boolean
+            description: |
+              Set this if the regulator is factory set with a 25mv step voltage
+              mapping.
+          ti,regulator-decay:
+            type: boolean
+            description: |
+              Set this if the output needs to decay, default is for the output
+              to slew down.
+
+        additionalProperties: false
+
+      "^(ldoa[1-3]|swa1|swb[1-2]|vtt)$":
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+
+        additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - regulators
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic: pmic@5e {
+            compatible = "ti,tps65086";
+            reg = <0x5e>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            regulators {
+                buck1 {
+                    regulator-name = "vcc1";
+                    regulator-min-microvolt = <1600000>;
+                    regulator-max-microvolt = <1600000>;
+                    regulator-boot-on;
+                    ti,regulator-decay;
+                    ti,regulator-step-size-25mv;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
deleted file mode 100644
index 67eac0ed32df..000000000000
--- a/Documentation/devicetree/bindings/mfd/tps65086.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* TPS65086 Power Management Integrated Circuit (PMIC) bindings
-
-Required properties:
- - compatible		: Should be "ti,tps65086".
- - reg			: I2C slave address.
- - interrupts		: The interrupt line the device is connected to.
- - interrupt-controller	: Marks the device node as an interrupt controller.
- - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
-			    The first cell is the IRQ number.
-			    The second cell is the flags, encoded as trigger
-			    masks from ../interrupt-controller/interrupts.txt.
- - gpio-controller      : Marks the device node as a GPIO Controller.
- - #gpio-cells          : Should be two.  The first cell is the pin number and
-                            the second cell is used to specify flags.
-                            See ../gpio/gpio.txt for more information.
- - regulators:          : List of child nodes that specify the regulator
-                            initialization data. Child nodes must be named
-                            after their hardware counterparts: buck[1-6],
-                            ldoa[1-3], swa1, swb[1-2], and vtt. Each child
-                            node is defined using the standard binding for
-                            regulators and the optional regulator properties
-                            defined below.
-
-Optional regulator properties:
- - ti,regulator-step-size-25mv	: This is applicable for buck[1-6], set this
-				    if the regulator is factory set with a 25mv
-				    step voltage mapping.
- - ti,regulator-decay		: This is applicable for buck[1-6], set this if
-				    the output needs to decay, default is for
-				    the output to slew down.
-
-Example:
-
-	pmic: tps65086@5e {
-		compatible = "ti,tps65086";
-		reg = <0x5e>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		regulators {
-			buck1 {
-				regulator-name = "vcc1";
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <1600000>;
-				regulator-boot-on;
-				ti,regulator-decay;
-				ti,regulator-step-size-25mv;
-			};
-		};
-	};