Merge tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:

 - SMMU Updates from Will Deacon:

     - SMMUv3:
        - Support stalling faults for platform devices
        - Decrease defaults sizes for the event and PRI queues
     - SMMUv2:
        - Support for a new '->probe_finalize' hook, needed by Nvidia
        - Even more Qualcomm compatible strings
        - Avoid Adreno TTBR1 quirk for DB820C platform

 - Intel VT-d updates from Lu Baolu:

     - Convert Intel IOMMU to use sva_lib helpers in iommu core
     - ftrace and debugfs supports for page fault handling
     - Support asynchronous nested capabilities
     - Various misc cleanups

 - Support for new VIOT ACPI table to make the VirtIO IOMMU
   available on x86

 - Add the amd_iommu=force_enable command line option to enable
   the IOMMU on platforms where they are known to cause problems

 - Support for version 2 of the Rockchip IOMMU

 - Various smaller fixes, cleanups and refactorings

* tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
  iommu/virtio: Enable x86 support
  iommu/dma: Pass address limit rather than size to iommu_setup_dma_ops()
  ACPI: Add driver for the VIOT table
  ACPI: Move IOMMU setup code out of IORT
  ACPI: arm64: Move DMA setup operations out of IORT
  iommu/vt-d: Fix dereference of pointer info before it is null checked
  iommu: Update "iommu.strict" documentation
  iommu/arm-smmu: Check smmu->impl pointer before dereferencing
  iommu/arm-smmu-v3: Remove unnecessary oom message
  iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
  iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
  iommu/vt-d: Fix linker error on 32-bit
  iommu/vt-d: No need to typecast
  iommu/vt-d: Define counter explicitly as unsigned int
  iommu/vt-d: Remove unnecessary braces
  iommu/vt-d: Removed unused iommu_count in dmar domain
  iommu/vt-d: Use bitfields for DMAR capabilities
  iommu/vt-d: Use DEVICE_ATTR_RO macro
  iommu/vt-d: Fix out-bounds-warning in intel/svm.c
  iommu/vt-d: Add PRQ handling latency sampling
  ...

4 files changed, 111 insertions, 39 deletions

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 13f13fdd4731..0081d83457e8 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -301,6 +301,9 @@
 					  allowed anymore to lift isolation
 					  requirements as needed. This option
 					  does not override iommu=pt
+			force_enable - Force enable the IOMMU on platforms known
+				       to be buggy with IOMMU enabled. Use this
+				       option with care.
 
 	amd_iommu_dump=	[HW,X86-64]
 			Enable AMD IOMMU driver option to dump the ACPI table
@@ -2031,7 +2034,7 @@
 			  forcing Dual Address Cycle for PCI cards supporting
 			  greater than 32-bit addressing.
 
-	iommu.strict=	[ARM64] Configure TLB invalidation behaviour
+	iommu.strict=	[ARM64, X86] Configure TLB invalidation behaviour
 			Format: { "0" | "1" }
 			0 - Lazy mode.
 			  Request that DMA unmap operations use deferred
@@ -2042,6 +2045,10 @@
 			1 - Strict mode (default).
 			  DMA unmap operations invalidate IOMMU hardware TLBs
 			  synchronously.
+			Note: on x86, the default behaviour depends on the
+			equivalent driver-specific parameters, but a strict
+			mode explicitly specified by either method takes
+			precedence.
 
 	iommu.passthrough=
 			[ARM64, X86] Configure DMA to bypass the IOMMU by default.
diff --git a/Documentation/devicetree/bindings/iommu/iommu.txt b/Documentation/devicetree/bindings/iommu/iommu.txt
index 3c36334e4f94..26ba9e530f13 100644
--- a/Documentation/devicetree/bindings/iommu/iommu.txt
+++ b/Documentation/devicetree/bindings/iommu/iommu.txt
@@ -92,6 +92,24 @@ Optional properties:
   tagging DMA transactions with an address space identifier. By default,
   this is 0, which means that the device only has one address space.
 
+- dma-can-stall: When present, the master can wait for a transaction to
+  complete for an indefinite amount of time. Upon translation fault some
+  IOMMUs, instead of aborting the translation immediately, may first
+  notify the driver and keep the transaction in flight. This allows the OS
+  to inspect the fault and, for example, make physical pages resident
+  before updating the mappings and completing the transaction. Such IOMMU
+  accepts a limited number of simultaneous stalled transactions before
+  having to either put back-pressure on the master, or abort new faulting
+  transactions.
+
+  Firmware has to opt-in stalling, because most buses and masters don't
+  support it. In particular it isn't compatible with PCI, where
+  transactions have to complete before a time limit. More generally it
+  won't work in systems and masters that haven't been designed for
+  stalling. For example the OS, in order to handle a stalled transaction,
+  may attempt to retrieve pages from secondary storage in a stalled
+  domain, leading to a deadlock.
+
 
 Notes:
 ======
diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt b/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
deleted file mode 100644
index 6ecefea1c6f9..000000000000
--- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Rockchip IOMMU
-==============
-
-A Rockchip DRM iommu translates io virtual addresses to physical addresses for
-its master device.  Each slave device is bound to a single master device, and
-shares its clocks, power domain and irq.
-
-Required properties:
-- compatible      : Should be "rockchip,iommu"
-- reg             : Address space for the configuration registers
-- interrupts      : Interrupt specifier for the IOMMU instance
-- interrupt-names : Interrupt name for the IOMMU instance
-- #iommu-cells    : Should be <0>.  This indicates the iommu is a
-                    "single-master" device, and needs no additional information
-                    to associate with its master device.  See:
-                    Documentation/devicetree/bindings/iommu/iommu.txt
-- clocks          : A list of clocks required for the IOMMU to be accessible by
-                    the host CPU.
-- clock-names     : Should contain the following:
-	"iface" - Main peripheral bus clock (PCLK/HCL) (required)
-	"aclk"  - AXI bus clock (required)
-
-Optional properties:
-- rockchip,disable-mmu-reset : Don't use the mmu reset operation.
-			       Some mmu instances may produce unexpected results
-			       when the reset operation is used.
-
-Example:
-
-	vopl_mmu: iommu@ff940300 {
-		compatible = "rockchip,iommu";
-		reg = <0xff940300 0x100>;
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vopl_mmu";
-		clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
-		clock-names = "aclk", "iface";
-		#iommu-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
new file mode 100644
index 000000000000..d2e28a9e3545
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/rockchip,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip IOMMU
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |+
+  A Rockchip DRM iommu translates io virtual addresses to physical addresses for
+  its master device. Each slave device is bound to a single master device and
+  shares its clocks, power domain and irq.
+
+  For information on assigning IOMMU controller to its peripheral devices,
+  see generic IOMMU bindings.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,iommu
+      - rockchip,rk3568-iommu
+
+  reg:
+    items:
+      - description: configuration registers for MMU instance 0
+      - description: configuration registers for MMU instance 1
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: interruption for MMU instance 0
+      - description: interruption for MMU instance 1
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: Core clock
+      - description: Interface clock
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: iface
+
+  "#iommu-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,disable-mmu-reset:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Do not use the mmu reset operation.
+      Some mmu instances may produce unexpected results
+      when the reset operation is used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vopl_mmu: iommu@ff940300 {
+      compatible = "rockchip,iommu";
+      reg = <0xff940300 0x100>;
+      interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
+      clock-names = "aclk", "iface";
+      #iommu-cells = <0>;
+    };