summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-01-13 20:43:32 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-01-13 20:43:32 -0800
commit21ebd6c68b5511b55f4f456e4ba17c2d711e3617 (patch)
tree2f4f98568a7a52ab6734fb190d0cbf6f9c1c6492 /arch/arm
parent4b8be38cf782f8ebebc089083fa0572ade79d7ca (diff)
parent74d836c4142e5d100f8d9a1b2ee3003c2ed7109d (diff)
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other.
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-sa1100/assabet.c12
-rw-r--r--arch/arm/mach-sa1100/cerf.c11
-rw-r--r--arch/arm/mach-sa1100/collie.c18
-rw-r--r--arch/arm/mach-sa1100/generic.c7
-rw-r--r--arch/arm/mach-sa1100/include/mach/mcp.h2
-rw-r--r--arch/arm/mach-sa1100/lart.c10
-rw-r--r--arch/arm/mach-sa1100/shannon.c11
-rw-r--r--arch/arm/mach-sa1100/simpad.c18
-rw-r--r--arch/arm/mach-ux500/board-mop500.c4
-rw-r--r--arch/arm/mach-ux500/board-u5500.c2
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs-board-mop500.h2
11 files changed, 90 insertions, 7 deletions
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 6b93e200bcac..5bc6b3837b20 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -202,6 +202,7 @@ static struct irda_platform_data assabet_irda_data = {
static struct mcp_plat_data assabet_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
+ .codec = "ucb1x00",
};
static void __init assabet_init(void)
@@ -252,6 +253,17 @@ static void __init assabet_init(void)
sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
ARRAY_SIZE(assabet_flash_resources));
sa11x0_register_irda(&assabet_irda_data);
+
+ /*
+ * Setup the PPC unit correctly.
+ */
+ PPDR &= ~PPC_RXD4;
+ PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+ PSDR |= PPC_RXD4;
+ PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+ PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
+ ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
sa11x0_register_mcp(&assabet_mcp_data);
}
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 11bb6d0b9be3..d12d0f48b1dc 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -124,12 +124,23 @@ static void __init cerf_map_io(void)
static struct mcp_plat_data cerf_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
+ .codec = "ucb1x00",
};
static void __init cerf_init(void)
{
platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
+
+ /*
+ * Setup the PPC unit correctly.
+ */
+ PPDR &= ~PPC_RXD4;
+ PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+ PSDR |= PPC_RXD4;
+ PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+ PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
sa11x0_register_mcp(&cerf_mcp_data);
}
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index b9060e236def..c483912d08af 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -27,6 +27,7 @@
#include <linux/timer.h>
#include <linux/gpio.h>
#include <linux/pda_power.h>
+#include <linux/mfd/ucb1x00.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -85,10 +86,15 @@ static struct scoop_pcmcia_config collie_pcmcia_config = {
.num_devs = 1,
};
+static struct ucb1x00_plat_data collie_ucb1x00_data = {
+ .gpio_base = COLLIE_TC35143_GPIO_BASE,
+};
+
static struct mcp_plat_data collie_mcp_data = {
.mccr0 = MCCR0_ADM | MCCR0_ExtClk,
.sclk_rate = 9216000,
- .gpio_base = COLLIE_TC35143_GPIO_BASE,
+ .codec = "ucb1x00",
+ .codec_pdata = &collie_ucb1x00_data,
};
/*
@@ -351,6 +357,16 @@ static void __init collie_init(void)
sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
ARRAY_SIZE(collie_flash_resources));
+
+ /*
+ * Setup the PPC unit correctly.
+ */
+ PPDR &= ~PPC_RXD4;
+ PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+ PSDR |= PPC_RXD4;
+ PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+ PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
sa11x0_register_mcp(&collie_mcp_data);
sharpsl_save_param();
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 480d2ea46b00..e3a28ca2a7b7 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -217,10 +217,15 @@ static struct platform_device sa11x0uart3_device = {
static struct resource sa11x0mcp_resources[] = {
[0] = {
.start = __PREG(Ser4MCCR0),
- .end = __PREG(Ser4MCCR0) + 0xffff,
+ .end = __PREG(Ser4MCCR0) + 0x1C - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
+ .start = __PREG(Ser4MCCR1),
+ .end = __PREG(Ser4MCCR1) + 0x4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
.start = IRQ_Ser4MCP,
.end = IRQ_Ser4MCP,
.flags = IORESOURCE_IRQ,
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index ed1a331508a7..586cec898b35 100644
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -17,6 +17,8 @@ struct mcp_plat_data {
u32 mccr1;
unsigned int sclk_rate;
int gpio_base;
+ const char *codec;
+ void *codec_pdata;
};
#endif
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index af4e2761f3db..d117ceab6215 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -24,10 +24,20 @@
static struct mcp_plat_data lart_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
+ .codec = "ucb1x00",
};
static void __init lart_init(void)
{
+ /*
+ * Setup the PPC unit correctly.
+ */
+ PPDR &= ~PPC_RXD4;
+ PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+ PSDR |= PPC_RXD4;
+ PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+ PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
sa11x0_register_mcp(&lart_mcp_data);
}
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 318b2b766a0b..748d34435b3f 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -55,11 +55,22 @@ static struct resource shannon_flash_resource = {
static struct mcp_plat_data shannon_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
+ .codec = "ucb1x00",
};
static void __init shannon_init(void)
{
sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
+
+ /*
+ * Setup the PPC unit correctly.
+ */
+ PPDR &= ~PPC_RXD4;
+ PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+ PSDR |= PPC_RXD4;
+ PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+ PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
sa11x0_register_mcp(&shannon_mcp_data);
}
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index e17c04d6e324..458ececefa58 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -14,6 +14,7 @@
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/mfd/ucb1x00.h>
#include <asm/irq.h>
#include <mach/hardware.h>
@@ -187,10 +188,15 @@ static struct resource simpad_flash_resources [] = {
}
};
+static struct ucb1x00_plat_data simpad_ucb1x00_data = {
+ .gpio_base = SIMPAD_UCB1X00_GPIO_BASE,
+};
+
static struct mcp_plat_data simpad_mcp_data = {
.mccr0 = MCCR0_ADM,
.sclk_rate = 11981000,
- .gpio_base = SIMPAD_UCB1X00_GPIO_BASE,
+ .codec = "ucb1300",
+ .codec_pdata = &simpad_ucb1x00_data,
};
@@ -378,6 +384,16 @@ static int __init simpad_init(void)
sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
ARRAY_SIZE(simpad_flash_resources));
+
+ /*
+ * Setup the PPC unit correctly.
+ */
+ PPDR &= ~PPC_RXD4;
+ PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+ PSDR |= PPC_RXD4;
+ PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+ PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
sa11x0_register_mcp(&simpad_mcp_data);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 9361a5290177..5c00712907d1 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -19,11 +19,11 @@
#include <linux/amba/pl022.h>
#include <linux/amba/serial.h>
#include <linux/spi/spi.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
#include <linux/regulator/ab8500.h>
#include <linux/mfd/tc3589x.h>
#include <linux/mfd/tps6105x.h>
-#include <linux/mfd/ab8500/gpio.h>
+#include <linux/mfd/abx500/ab8500-gpio.h>
#include <linux/leds-lp5521.h>
#include <linux/input.h>
#include <linux/smsc911x.h>
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index fe1569b67c91..9de9e9c4dbbb 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -10,7 +10,7 @@
#include <linux/amba/bus.h>
#include <linux/irq.h>
#include <linux/i2c.h>
-#include <linux/mfd/ab5500/ab5500.h>
+#include <linux/mfd/abx500/ab5500.h>
#include <asm/hardware/gic.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index 47969909836c..d2d4131435a6 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -9,7 +9,7 @@
#define __MACH_IRQS_BOARD_MOP500_H
/* Number of AB8500 irqs is taken from header file */
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
#define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START
#define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \