Merge tag 'regulator-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This has been a very busy release for the core, some fixes, one large
  new feature and a big bit of refactoring to update the GPIO API:

   - Support for coupled regulators from Dmitry Osipenko based on a
     prior attempt by Maciej Purski, allowing us to handle situations
     where the voltages on two regulators can't be too far apart from
     each other.

   - Conversion of the GPIO support in both drivers and the core to use
     GPIO descriptors rather than numbers, part of the overall project
     to remove GPIO numbers.

   - Support for standby mode suspend states from Andrei Stefanescu.

   - New drivers for Allwinner AXP209, Cirrus Logic Lochnagar and
     Microchip MPC16502"

* tag 'regulator-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (90 commits)
  regulator: tps65910: fix a missing check of return value
  regulator: mcp16502: Select REGMAP_I2C to fix build error
  regulator: convert to DEFINE_SHOW_ATTRIBUTE
  regulator: mcp16502: Fix missing n_voltages setting
  regulator: mcp16502: Use #ifdef CONFIG_PM_SLEEP around mcp16502_suspend/resume_noirq
  regulator: mcp16502: code cleanup
  regulator: act8945a-regulator: make symbol act8945a_pm static
  drivers/regulator: fix a missing check of return value
  regulator: act8945a-regulator: fix 'defined but not used' compiler warning
  regulator: axp20x: fix set_ramp_delay for AXP209/dcdc2
  regulator: mcp16502: add support for suspend
  mfd: axp20x: use explicit bit defines
  mfd: axp20x: Clean up included headers
  regulator: dts: enable soft-start and ramp delay for the OLinuXino Lime2
  dt-bindings: mfd: axp20x: Add software based soft_start for AXP209 LDO3
  regulator: axp20x: add software based soft_start for AXP209 LDO3
  dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AXP209
  regulator: axp20x: add support for set_ramp_delay for AXP209
  mfd: axp20x: name voltage ramping define properly
  regulator: mcp16502: add regulator driver for MCP16502
  ...

2 files changed, 17 insertions, 2 deletions

diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index b828677f331d..ffafe9720b35 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -245,6 +245,8 @@
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
 	regulator-name = "vddio-csi0";
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
 };
 
 &reg_ldo4 {
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 5aa472892465..76c4855a03bc 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -194,8 +194,8 @@ static struct wm8994_pdata wm8994_pdata = {
 		0x3,          /* IRQ out, active high, CMOS */
 	},
 	.ldo = {
-		 { .enable = S3C64XX_GPN(6), .init_data = &wm8994_ldo1, },
-		 { .enable = S3C64XX_GPN(4), .init_data = &wm8994_ldo2, },
+		 { .init_data = &wm8994_ldo1, },
+		 { .init_data = &wm8994_ldo2, },
 	},
 };
 
@@ -203,6 +203,18 @@ static const struct i2c_board_info wm1277_devs[] = {
 	{ I2C_BOARD_INFO("wm8958", 0x1a),  /* WM8958 is the superset */
 	  .platform_data = &wm8994_pdata,
 	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
+	  .dev_name = "wm8958",
+	},
+};
+
+static struct gpiod_lookup_table wm8994_gpiod_table = {
+	.dev_id = "i2c-wm8958", /* I2C device name */
+	.table = {
+		GPIO_LOOKUP("GPION", 6,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPION", 4,
+			    "wlf,ldo2ena", GPIO_ACTIVE_HIGH),
+		{ },
 	},
 };
 
@@ -381,6 +393,7 @@ static int wlf_gf_module_probe(struct i2c_client *i2c,
 
 	gpiod_add_lookup_table(&wm5102_reva_gpiod_table);
 	gpiod_add_lookup_table(&wm5102_gpiod_table);
+	gpiod_add_lookup_table(&wm8994_gpiod_table);
 
 	if (i < ARRAY_SIZE(gf_mods)) {
 		dev_info(&i2c->dev, "%s revision %d\n",