summaryrefslogtreecommitdiff
path: root/arch/mips/kernel
diff options
context:
space:
mode:
authorMaciej W. Rozycki <macro@imgtec.com>2017-05-23 13:38:19 +0100
committerRalf Baechle <ralf@linux-mips.org>2017-07-05 14:07:20 +0200
commitf3235d32075137e277a2e4ea0d7cef2b59480f4a (patch)
tree91f6d52e132b1f9a410077137ade623732f99801 /arch/mips/kernel
parent8d1630f13754f1435d3ea7078829121c52f38d15 (diff)
MIPS: MIPS16e2: Subdecode extended LWSP/SWSP instructions
Implement extended LWSP/SWSP instruction subdecoding for the purpose of unaligned GP-relative memory access emulation. With the introduction of the MIPS16e2 ASE[1] the previously must-be-zero 3-bit field at bits 7..5 of the extended encodings of the instructions selected with the LWSP and SWSP major opcodes has become a `sel' field, acting as an opcode extension for additional operations. In both cases the `sel' value of 0 has retained the original operation, that is: LW rx, offset(sp) and: SW rx, offset(sp) for LWSP and SWSP respectively. In hardware predating the MIPS16e2 ASE other values may or may not have been decoded, architecturally yielding unpredictable results, and in our unaligned memory access emulation we have treated the 3-bit field as a don't-care, that is effectively making all the possible encodings of the field alias to the architecturally defined encoding of 0. For the non-zero values of the `sel' field the MIPS16e2 ASE has in particular defined these GP-relative operations: LW rx, offset(gp) # sel = 1 LH rx, offset(gp) # sel = 2 LHU rx, offset(gp) # sel = 4 and SW rx, offset(gp) # sel = 1 SH rx, offset(gp) # sel = 2 for LWSP and SWSP respectively, which will trap with an Address Error exception if the effective address calculated is not naturally-aligned for the operation requested. These operations have been selected for unaligned access emulation, for consistency with the corresponding regular MIPS and microMIPS operations. For other non-zero values of the `sel' field the MIPS16e2 ASE has defined further operations, which however either never trap with an Address Error exception, such as LWL or GP-relative SB, or are not supposed to be emulated, such as LL or SC. These operations have been selected to exclude from unaligned access emulation, should an Address Error exception ever happen with them. Subdecode the `sel' field in unaligned access emulation then for the extended encodings of the instructions selected with the LWSP and SWSP major opcodes, whenever support for the MIPS16e2 ASE has been detected in hardware, and either emulate the operation requested or send SIGBUS to the originating process, according to the selection described above. For hardware implementing the MIPS16 ASE, however lacking MIPS16e2 ASE support retain the original interpretation of the `sel' field. The effects of this change are illustrated with the following user program: $ cat mips16e2-test.c #include <inttypes.h> #include <stdio.h> int main(void) { int64_t scratch[16] = { 0 }; int32_t *tmp0, *tmp1, *tmp2; int i; scratch[0] = 0xc8c7c6c5c4c3c2c1; scratch[1] = 0xd0cfcecdcccbcac9; asm volatile( "move %0, $sp\n\t" "move %1, $gp\n\t" "move $sp, %4\n\t" "addiu %2, %4, 8\n\t" "move $gp, %2\n\t" "lw %2, 2($sp)\n\t" "sw %2, 16(%4)\n\t" "lw %2, 2($gp)\n\t" "sw %2, 24(%4)\n\t" "lw %2, 1($sp)\n\t" "sw %2, 32(%4)\n\t" "lh %2, 1($gp)\n\t" "sw %2, 40(%4)\n\t" "lw %2, 3($sp)\n\t" "sw %2, 48(%4)\n\t" "lhu %2, 3($gp)\n\t" "sw %2, 56(%4)\n\t" "lw %2, 0(%4)\n\t" "sw %2, 66($sp)\n\t" "lw %2, 8(%4)\n\t" "sw %2, 82($gp)\n\t" "lw %2, 0(%4)\n\t" "sw %2, 97($sp)\n\t" "lw %2, 8(%4)\n\t" "sh %2, 113($gp)\n\t" "move $gp, %1\n\t" "move $sp, %0" : "=&d" (tmp0), "=&d" (tmp1), "=&d" (tmp2), "=m" (scratch) : "d" (scratch)); for (i = 0; i < sizeof(scratch) / sizeof(*scratch); i += 2) printf("%016" PRIx64 "\t%016" PRIx64 "\n", scratch[i], scratch[i + 1]); return 0; } $ to be compiled with: $ gcc -mips16 -mips32r2 -Wa,-mmips16e2 -o mips16e2-test mips16e2-test.c $ With 74Kf hardware, which does not implement the MIPS16e2 ASE, this program produces the following output: $ ./mips16e2-test c8c7c6c5c4c3c2c1 d0cfcecdcccbcac9 00000000c6c5c4c3 00000000c6c5c4c3 00000000c5c4c3c2 00000000c5c4c3c2 00000000c7c6c5c4 00000000c7c6c5c4 0000c4c3c2c10000 0000000000000000 0000cccbcac90000 0000000000000000 000000c4c3c2c100 0000000000000000 000000cccbcac900 0000000000000000 $ regardless of whether the change has been applied or not. With the change not applied and interAptive MR2 hardware[2], which does implement the MIPS16e2 ASE, it produces the following output: $ ./mips16e2-test c8c7c6c5c4c3c2c1 d0cfcecdcccbcac9 00000000c6c5c4c3 00000000cecdcccb 00000000c5c4c3c2 00000000cdcccbca 00000000c7c6c5c4 00000000cfcecdcc 0000c4c3c2c10000 0000000000000000 0000000000000000 0000cccbcac90000 000000c4c3c2c100 0000000000000000 0000000000000000 000000cccbcac900 $ which shows that for GP-relative operations the correct trapping address calculated from $gp has been obtained from the CP0 BadVAddr register and so has data from the source operand, however masking and extension has not been applied for halfword operations. With the change applied and interAptive MR2 hardware the program produces the following output: $ ./mips16e2-test c8c7c6c5c4c3c2c1 d0cfcecdcccbcac9 00000000c6c5c4c3 00000000cecdcccb 00000000c5c4c3c2 00000000ffffcbca 00000000c7c6c5c4 000000000000cdcc 0000c4c3c2c10000 0000000000000000 0000000000000000 0000cccbcac90000 000000c4c3c2c100 0000000000000000 0000000000000000 0000000000cac900 $ as expected. References: [1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific Extension Technical Reference Manual", Imagination Technologies Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016 [2] "MIPS32 interAptiv Multiprocessing System Software User's Manual", Imagination Technologies Ltd., Document Number: MD00904, Revision 02.01, June 15, 2016, Chapter 24 "MIPS16e Application-Specific Extension to the MIPS32 Instruction Set", pp. 871-883 Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16095/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/kernel')
-rw-r--r--arch/mips/kernel/unaligned.c39
1 files changed, 37 insertions, 2 deletions
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 67946bb98dd0..5eaf2578ac04 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -2010,6 +2010,8 @@ static void emulate_load_store_MIPS16e(struct pt_regs *regs, void __user * addr)
u16 __user *pc16;
unsigned long origpc;
union mips16e_instruction mips16inst, oldinst;
+ unsigned int opcode;
+ int extended = 0;
origpc = regs->cp0_epc;
orig31 = regs->regs[31];
@@ -2022,6 +2024,7 @@ static void emulate_load_store_MIPS16e(struct pt_regs *regs, void __user * addr)
/* skip EXTEND instruction */
if (mips16inst.ri.opcode == MIPS16e_extend_op) {
+ extended = 1;
pc16++;
__get_user(mips16inst.full, pc16);
} else if (delay_slot(regs)) {
@@ -2034,7 +2037,8 @@ static void emulate_load_store_MIPS16e(struct pt_regs *regs, void __user * addr)
goto sigbus;
}
- switch (mips16inst.ri.opcode) {
+ opcode = mips16inst.ri.opcode;
+ switch (opcode) {
case MIPS16e_i64_op: /* I64 or RI64 instruction */
switch (mips16inst.i64.func) { /* I64/RI64 func field check */
case MIPS16e_ldpc_func:
@@ -2054,9 +2058,40 @@ static void emulate_load_store_MIPS16e(struct pt_regs *regs, void __user * addr)
goto sigbus;
case MIPS16e_swsp_op:
+ reg = reg16to32[mips16inst.ri.rx];
+ if (extended && cpu_has_mips16e2)
+ switch (mips16inst.ri.imm >> 5) {
+ case 0: /* SWSP */
+ case 1: /* SWGP */
+ break;
+ case 2: /* SHGP */
+ opcode = MIPS16e_sh_op;
+ break;
+ default:
+ goto sigbus;
+ }
+ break;
+
case MIPS16e_lwpc_op:
+ reg = reg16to32[mips16inst.ri.rx];
+ break;
+
case MIPS16e_lwsp_op:
reg = reg16to32[mips16inst.ri.rx];
+ if (extended && cpu_has_mips16e2)
+ switch (mips16inst.ri.imm >> 5) {
+ case 0: /* LWSP */
+ case 1: /* LWGP */
+ break;
+ case 2: /* LHGP */
+ opcode = MIPS16e_lh_op;
+ break;
+ case 4: /* LHUGP */
+ opcode = MIPS16e_lhu_op;
+ break;
+ default:
+ goto sigbus;
+ }
break;
case MIPS16e_i8_op:
@@ -2070,7 +2105,7 @@ static void emulate_load_store_MIPS16e(struct pt_regs *regs, void __user * addr)
break;
}
- switch (mips16inst.ri.opcode) {
+ switch (opcode) {
case MIPS16e_lb_op:
case MIPS16e_lbu_op: