[POWERPC] Move PCI nodes to be sibilings with SOC nodes

Updated the device trees to have the PCI nodes be at the same level as
the SOC node.  This is to make it so that the SOC nodes children address
space is just on chip registers and not other bus memory as well.

Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge
that exists in the PHB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 33 insertions, 33 deletions

diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 01393e6d7da9..cdc4a94e9c28 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -92,39 +92,6 @@
 			descriptor-types-mask = <0122003f>;
 		};
 
-		pci@8500 {
-			interrupt-map-mask = <f800 0 0 7>;
-			interrupt-map = <
-					/* IDSEL 0x10 AD16 (USB) */
-					 8000 0 0 1 &pic 11 8
-
-					/* IDSEL 0x11 AD17 (Mini1)*/
-					 8800 0 0 1 &pic 12 8
-					 8800 0 0 2 &pic 13 8
-					 8800 0 0 3 &pic 14 8
-					 8800 0 0 4 &pic 30 8
-
-					/* IDSEL 0x12 AD18 (PCI/Mini2) */
-					 9000 0 0 1 &pic 13 8
-					 9000 0 0 2 &pic 14 8
-					 9000 0 0 3 &pic 30 8
-					 9000 0 0 4 &pic 11 8>;
-
-			interrupt-parent = <&pic>;
-			interrupts = <42 8>;
-			bus-range = <0 0>;
-			ranges = <42000000 0 80000000 80000000 0 10000000
-			          02000000 0 90000000 90000000 0 10000000
-			          01000000 0 d0000000 d0000000 0 04000000>;
-			clock-frequency = <0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			reg = <8500 100>;
-			compatible = "fsl,mpc8349-pci";
-			device_type = "pci";
-		};
-
 		pic:pic@700 {
 			interrupt-controller;
 			#address-cells = <0>;
@@ -294,4 +261,37 @@
 			interrupt-parent = <&pic>;
 		};
 	};
+
+	pci@e0008500 {
+		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map = <
+				/* IDSEL 0x10 AD16 (USB) */
+				 8000 0 0 1 &pic 11 8
+
+				/* IDSEL 0x11 AD17 (Mini1)*/
+				 8800 0 0 1 &pic 12 8
+				 8800 0 0 2 &pic 13 8
+				 8800 0 0 3 &pic 14 8
+				 8800 0 0 4 &pic 30 8
+
+				/* IDSEL 0x12 AD18 (PCI/Mini2) */
+				 9000 0 0 1 &pic 13 8
+				 9000 0 0 2 &pic 14 8
+				 9000 0 0 3 &pic 30 8
+				 9000 0 0 4 &pic 11 8>;
+
+		interrupt-parent = <&pic>;
+		interrupts = <42 8>;
+		bus-range = <0 0>;
+		ranges = <42000000 0 80000000 80000000 0 10000000
+			  02000000 0 90000000 90000000 0 10000000
+			  01000000 0 d0000000 d0000000 0 04000000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <e0008500 100>;
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
 };