x86/mm: Encrypt the initrd earlier for BSP microcode update

commit 107cd2532181b96c549e8f224cdcca8631c3076b upstream.

Currently the BSP microcode update code examines the initrd very early
in the boot process.  If SME is active, the initrd is treated as being
encrypted but it has not been encrypted (in place) yet.  Update the
early boot code that encrypts the kernel to also encrypt the initrd so
that early BSP microcode updates work.

Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180110192634.6026.10452.stgit@tlendack-t1.amdoffice.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 81 insertions, 31 deletions

diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c
index b4f15fb2da8f..e110fab33ed4 100644
--- a/arch/x86/mm/mem_encrypt.c
+++ b/arch/x86/mm/mem_encrypt.c
@@ -487,11 +487,12 @@ static unsigned long __init sme_pgtable_calc(unsigned long len)
 	return total;
 }
 
-void __init sme_encrypt_kernel(void)
+void __init sme_encrypt_kernel(struct boot_params *bp)
 {
 	unsigned long workarea_start, workarea_end, workarea_len;
 	unsigned long execute_start, execute_end, execute_len;
 	unsigned long kernel_start, kernel_end, kernel_len;
+	unsigned long initrd_start, initrd_end, initrd_len;
 	struct sme_populate_pgd_data ppd;
 	unsigned long pgtable_area_len;
 	unsigned long decrypted_base;
@@ -500,14 +501,15 @@ void __init sme_encrypt_kernel(void)
 		return;
 
 	/*
-	 * Prepare for encrypting the kernel by building new pagetables with
-	 * the necessary attributes needed to encrypt the kernel in place.
+	 * Prepare for encrypting the kernel and initrd by building new
+	 * pagetables with the necessary attributes needed to encrypt the
+	 * kernel in place.
 	 *
 	 *   One range of virtual addresses will map the memory occupied
-	 *   by the kernel as encrypted.
+	 *   by the kernel and initrd as encrypted.
 	 *
 	 *   Another range of virtual addresses will map the memory occupied
-	 *   by the kernel as decrypted and write-protected.
+	 *   by the kernel and initrd as decrypted and write-protected.
 	 *
 	 *     The use of write-protect attribute will prevent any of the
 	 *     memory from being cached.
@@ -518,6 +520,20 @@ void __init sme_encrypt_kernel(void)
 	kernel_end = ALIGN(__pa_symbol(_end), PMD_PAGE_SIZE);
 	kernel_len = kernel_end - kernel_start;
 
+	initrd_start = 0;
+	initrd_end = 0;
+	initrd_len = 0;
+#ifdef CONFIG_BLK_DEV_INITRD
+	initrd_len = (unsigned long)bp->hdr.ramdisk_size |
+		     ((unsigned long)bp->ext_ramdisk_size << 32);
+	if (initrd_len) {
+		initrd_start = (unsigned long)bp->hdr.ramdisk_image |
+			       ((unsigned long)bp->ext_ramdisk_image << 32);
+		initrd_end = PAGE_ALIGN(initrd_start + initrd_len);
+		initrd_len = initrd_end - initrd_start;
+	}
+#endif
+
 	/* Set the encryption workarea to be immediately after the kernel */
 	workarea_start = kernel_end;
 
@@ -540,6 +556,8 @@ void __init sme_encrypt_kernel(void)
 	 */
 	pgtable_area_len = sizeof(pgd_t) * PTRS_PER_PGD;
 	pgtable_area_len += sme_pgtable_calc(execute_end - kernel_start) * 2;
+	if (initrd_len)
+		pgtable_area_len += sme_pgtable_calc(initrd_len) * 2;
 
 	/* PUDs and PMDs needed in the current pagetables for the workarea */
 	pgtable_area_len += sme_pgtable_calc(execute_len + pgtable_area_len);
@@ -578,9 +596,9 @@ void __init sme_encrypt_kernel(void)
 
 	/*
 	 * A new pagetable structure is being built to allow for the kernel
-	 * to be encrypted. It starts with an empty PGD that will then be
-	 * populated with new PUDs and PMDs as the encrypted and decrypted
-	 * kernel mappings are created.
+	 * and initrd to be encrypted. It starts with an empty PGD that will
+	 * then be populated with new PUDs and PMDs as the encrypted and
+	 * decrypted kernel mappings are created.
 	 */
 	ppd.pgd = ppd.pgtable_area;
 	memset(ppd.pgd, 0, sizeof(pgd_t) * PTRS_PER_PGD);
@@ -593,6 +611,12 @@ void __init sme_encrypt_kernel(void)
 	 * the base of the mapping.
 	 */
 	decrypted_base = (pgd_index(workarea_end) + 1) & (PTRS_PER_PGD - 1);
+	if (initrd_len) {
+		unsigned long check_base;
+
+		check_base = (pgd_index(initrd_end) + 1) & (PTRS_PER_PGD - 1);
+		decrypted_base = max(decrypted_base, check_base);
+	}
 	decrypted_base <<= PGDIR_SHIFT;
 
 	/* Add encrypted kernel (identity) mappings */
@@ -607,6 +631,21 @@ void __init sme_encrypt_kernel(void)
 	ppd.vaddr_end = kernel_end + decrypted_base;
 	sme_map_range_decrypted_wp(&ppd);
 
+	if (initrd_len) {
+		/* Add encrypted initrd (identity) mappings */
+		ppd.paddr = initrd_start;
+		ppd.vaddr = initrd_start;
+		ppd.vaddr_end = initrd_end;
+		sme_map_range_encrypted(&ppd);
+		/*
+		 * Add decrypted, write-protected initrd (non-identity) mappings
+		 */
+		ppd.paddr = initrd_start;
+		ppd.vaddr = initrd_start + decrypted_base;
+		ppd.vaddr_end = initrd_end + decrypted_base;
+		sme_map_range_decrypted_wp(&ppd);
+	}
+
 	/* Add decrypted workarea mappings to both kernel mappings */
 	ppd.paddr = workarea_start;
 	ppd.vaddr = workarea_start;
@@ -622,6 +661,11 @@ void __init sme_encrypt_kernel(void)
 	sme_encrypt_execute(kernel_start, kernel_start + decrypted_base,
 			    kernel_len, workarea_start, (unsigned long)ppd.pgd);
 
+	if (initrd_len)
+		sme_encrypt_execute(initrd_start, initrd_start + decrypted_base,
+				    initrd_len, workarea_start,
+				    (unsigned long)ppd.pgd);
+
 	/*
 	 * At this point we are running encrypted.  Remove the mappings for
 	 * the decrypted areas - all that is needed for this is to remove
@@ -631,6 +675,12 @@ void __init sme_encrypt_kernel(void)
 	ppd.vaddr_end = kernel_end + decrypted_base;
 	sme_clear_pgd(&ppd);
 
+	if (initrd_len) {
+		ppd.vaddr = initrd_start + decrypted_base;
+		ppd.vaddr_end = initrd_end + decrypted_base;
+		sme_clear_pgd(&ppd);
+	}
+
 	ppd.vaddr = workarea_start + decrypted_base;
 	ppd.vaddr_end = workarea_end + decrypted_base;
 	sme_clear_pgd(&ppd);
diff --git a/arch/x86/mm/mem_encrypt_boot.S b/arch/x86/mm/mem_encrypt_boot.S
index 23a8a9e411ea..01f682cf77a8 100644
--- a/arch/x86/mm/mem_encrypt_boot.S
+++ b/arch/x86/mm/mem_encrypt_boot.S
@@ -22,9 +22,9 @@ ENTRY(sme_encrypt_execute)
 
 	/*
 	 * Entry parameters:
-	 *   RDI - virtual address for the encrypted kernel mapping
-	 *   RSI - virtual address for the decrypted kernel mapping
-	 *   RDX - length of kernel
+	 *   RDI - virtual address for the encrypted mapping
+	 *   RSI - virtual address for the decrypted mapping
+	 *   RDX - length to encrypt
 	 *   RCX - virtual address of the encryption workarea, including:
 	 *     - stack page (PAGE_SIZE)
 	 *     - encryption routine page (PAGE_SIZE)
@@ -41,9 +41,9 @@ ENTRY(sme_encrypt_execute)
 	addq	$PAGE_SIZE, %rax	/* Workarea encryption routine */
 
 	push	%r12
-	movq	%rdi, %r10		/* Encrypted kernel */
-	movq	%rsi, %r11		/* Decrypted kernel */
-	movq	%rdx, %r12		/* Kernel length */
+	movq	%rdi, %r10		/* Encrypted area */
+	movq	%rsi, %r11		/* Decrypted area */
+	movq	%rdx, %r12		/* Area length */
 
 	/* Copy encryption routine into the workarea */
 	movq	%rax, %rdi				/* Workarea encryption routine */
@@ -52,10 +52,10 @@ ENTRY(sme_encrypt_execute)
 	rep	movsb
 
 	/* Setup registers for call */
-	movq	%r10, %rdi		/* Encrypted kernel */
-	movq	%r11, %rsi		/* Decrypted kernel */
+	movq	%r10, %rdi		/* Encrypted area */
+	movq	%r11, %rsi		/* Decrypted area */
 	movq	%r8, %rdx		/* Pagetables used for encryption */
-	movq	%r12, %rcx		/* Kernel length */
+	movq	%r12, %rcx		/* Area length */
 	movq	%rax, %r8		/* Workarea encryption routine */
 	addq	$PAGE_SIZE, %r8		/* Workarea intermediate copy buffer */
 
@@ -71,7 +71,7 @@ ENDPROC(sme_encrypt_execute)
 
 ENTRY(__enc_copy)
 /*
- * Routine used to encrypt kernel.
+ * Routine used to encrypt memory in place.
  *   This routine must be run outside of the kernel proper since
  *   the kernel will be encrypted during the process. So this
  *   routine is defined here and then copied to an area outside
@@ -79,19 +79,19 @@ ENTRY(__enc_copy)
  *   during execution.
  *
  *   On entry the registers must be:
- *     RDI - virtual address for the encrypted kernel mapping
- *     RSI - virtual address for the decrypted kernel mapping
+ *     RDI - virtual address for the encrypted mapping
+ *     RSI - virtual address for the decrypted mapping
  *     RDX - address of the pagetables to use for encryption
- *     RCX - length of kernel
+ *     RCX - length of area
  *      R8 - intermediate copy buffer
  *
  *     RAX - points to this routine
  *
- * The kernel will be encrypted by copying from the non-encrypted
- * kernel space to an intermediate buffer and then copying from the
- * intermediate buffer back to the encrypted kernel space. The physical
- * addresses of the two kernel space mappings are the same which
- * results in the kernel being encrypted "in place".
+ * The area will be encrypted by copying from the non-encrypted
+ * memory space to an intermediate buffer and then copying from the
+ * intermediate buffer back to the encrypted memory space. The physical
+ * addresses of the two mappings are the same which results in the area
+ * being encrypted "in place".
  */
 	/* Enable the new page tables */
 	mov	%rdx, %cr3
@@ -106,9 +106,9 @@ ENTRY(__enc_copy)
 	push	%r15
 	push	%r12
 
-	movq	%rcx, %r9		/* Save kernel length */
-	movq	%rdi, %r10		/* Save encrypted kernel address */
-	movq	%rsi, %r11		/* Save decrypted kernel address */
+	movq	%rcx, %r9		/* Save area length */
+	movq	%rdi, %r10		/* Save encrypted area address */
+	movq	%rsi, %r11		/* Save decrypted area address */
 
 	/* Set the PAT register PA5 entry to write-protect */
 	movl	$MSR_IA32_CR_PAT, %ecx
@@ -128,13 +128,13 @@ ENTRY(__enc_copy)
 	movq	%r9, %r12
 
 2:
-	movq	%r11, %rsi		/* Source - decrypted kernel */
+	movq	%r11, %rsi		/* Source - decrypted area */
 	movq	%r8, %rdi		/* Dest   - intermediate copy buffer */
 	movq	%r12, %rcx
 	rep	movsb
 
 	movq	%r8, %rsi		/* Source - intermediate copy buffer */
-	movq	%r10, %rdi		/* Dest   - encrypted kernel */
+	movq	%r10, %rdi		/* Dest   - encrypted area */
 	movq	%r12, %rcx
 	rep	movsb