Merge remote branch 'galak/next'

46 files changed, 1743 insertions, 321 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 61abde11a45e..5dbd375a3f2a 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -215,7 +215,8 @@ config ARCH_HIBERNATION_POSSIBLE
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx
+	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
+		   PPC_85xx || PPC_86xx
 
 config PPC_DCR_NATIVE
 	bool
@@ -664,6 +665,14 @@ config FSL_PCI
 	select PPC_INDIRECT_PCI
 	select PCI_QUIRKS
 
+config FSL_PMC
+	bool
+	default y
+	depends on SUSPEND && (PPC_85xx || PPC_86xx)
+	help
+	  Freescale MPC85xx/MPC86xx power management controller support
+	  (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
+
 config 4xx_SOC
 	bool
 
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 910944edd886..c86114e93f1e 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -118,6 +118,12 @@
 			};
 		};
 
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
 		fpga@4,0 {
 			compatible = "gef,ppc9a-fpga-regs";
 			reg = <0x4 0x0 0x40>;
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 2107d3c7cfe1..820c2b355ab1 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -115,6 +115,12 @@
 			};
 		};
 
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
 		fpga@4,0 {
 			compatible = "gef,fpga-regs";
 			reg = <0x4 0x0 0x40>;
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index 35a63183eecc..30911adefc8e 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -84,6 +84,12 @@
 			  6 0 0xfd000000 0x00800000     // IO FPGA (8-bit)
 			  7 0 0xfd800000 0x00800000>;   // IO FPGA (32-bit)
 
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
 		fpga@4,0 {
 			compatible = "gef,fpga-regs";
 			reg = <0x4 0x0 0x40>;
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
index 167044f7de1d..65b8b4f27efe 100644
--- a/arch/powerpc/boot/dts/kmeter1.dts
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -59,6 +59,13 @@
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;	/* Filled in by U-Boot */
 
+		pmc: power@b00 {
+			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 436c9c671dd9..05ad8c98e527 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -79,6 +79,13 @@
 			reg = <0x200 0x100>;
 		};
 
+		pmc: power@b00 {
+			compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -163,6 +170,7 @@
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0x4c>;
 			fsl,descriptor-types-mask = <0x0122003f>;
+			sleep = <&pmc 0x03000000>;
 		};
 
 		ipic: pic@700 {
@@ -428,5 +436,6 @@
 		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
+		sleep = <&pmc 0x00010000>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 9a0952f74b81..f4fadb23ad6f 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -62,6 +62,13 @@
 			reg = <0x200 0x100>;
 		};
 
+		pmc: power@b00 {
+			compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -141,6 +148,7 @@
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0x4c>;
 			fsl,descriptor-types-mask = <0x0122003f>;
+			sleep = <&pmc 0x03000000>;
 		};
 
 		ipic:pic@700 {
@@ -360,5 +368,6 @@
 		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
+		sleep = <&pmc 0x00010000>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 39ff4c829caf..45cfa1c50a2a 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -99,6 +99,13 @@
 			reg = <0x200 0x100>;
 		};
 
+		pmc: power@b00 {
+			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -194,6 +201,7 @@
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0x7e>;
 			fsl,descriptor-types-mask = <0x01010ebf>;
+			sleep = <&pmc 0x03000000>;
 		};
 
 		ipic: pic@700 {
@@ -470,5 +478,6 @@
 		       0xe0008300 0x8>;		/* config space access registers */
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
+		sleep = <&pmc 0x00010000>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 6315d6fcc58a..bdf4459677b1 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -71,6 +71,13 @@
 			reg = <0x200 0x100>;
 		};
 
+		pmc: power@b00 {
+			compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
 		i2c@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -161,6 +168,7 @@
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0x7e>;
 			fsl,descriptor-types-mask = <0x01010ebf>;
+			sleep = <&pmc 0x03000000>;
 		};
 
 		ipic: interrupt-controller@700 {
@@ -455,6 +463,7 @@
 				 0xa800 0 0 2 &ipic 20 8
 				 0xa800 0 0 3 &ipic 21 8
 				 0xa800 0 0 4 &ipic 18 8>;
+		sleep = <&pmc 0x00010000>;
 		/* filled by u-boot */
 		bus-range = <0 0>;
 		clock-frequency = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 00c2bbda7013..6d892ba74e55 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -40,6 +40,8 @@
 			i-cache-line-size = <32>;	// 32 bytes
 			d-cache-size = <0x8000>;		// L1, 32K
 			i-cache-size = <0x8000>;		// L1, 32K
+			sleep = <&pmc 0x00008000	// core
+				 &pmc 0x00004000>;	// timebase
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
@@ -94,31 +96,41 @@
 			interrupts = <16 2>;
 		};
 
-		i2c@3000 {
+		i2c-sleep-nexus {
 			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x00000004>;
+			ranges;
 
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <43 2>;
+				interrupt-parent = <&mpic>;
+				dfsrr;
+
+				rtc@68 {
+					compatible = "dallas,ds1374";
+					reg = <0x68>;
+					interrupts = <3 1>;
+					interrupt-parent = <&mpic>;
+				};
 			};
-		};
 
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
+			i2c@3100 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				compatible = "fsl-i2c";
+				reg = <0x3100 0x100>;
+				interrupts = <43 2>;
+				interrupt-parent = <&mpic>;
+				dfsrr;
+			};
 		};
 
 		dma@21300 {
@@ -128,6 +140,8 @@
 			reg = <0x21300 0x4>;
 			ranges = <0x0 0x21100 0x200>;
 			cell-index = <0>;
+			sleep = <&pmc 0x00000400>;
+
 			dma-channel@0 {
 				compatible = "fsl,mpc8568-dma-channel",
 						"fsl,eloplus-dma-channel";
@@ -176,6 +190,7 @@
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi0>;
 			phy-handle = <&phy2>;
+			sleep = <&pmc 0x00000080>;
 
 			mdio@520 {
 				#address-cells = <1>;
@@ -228,6 +243,7 @@
 			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi1>;
 			phy-handle = <&phy3>;
+			sleep = <&pmc 0x00000040>;
 
 			mdio@520 {
 				#address-cells = <1>;
@@ -242,30 +258,47 @@
 			};
 		};
 
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
+		duart-sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x00000002>;
+			ranges;
+
+			serial0: serial@4500 {
+				cell-index = <0>;
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x4500 0x100>;
+				clock-frequency = <0>;
+				interrupts = <42 2>;
+				interrupt-parent = <&mpic>;
+			};
+
+			serial1: serial@4600 {
+				cell-index = <1>;
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x4600 0x100>;
+				clock-frequency = <0>;
+				interrupts = <42 2>;
+				interrupt-parent = <&mpic>;
+			};
 		};
 
-		global-utilities@e0000 {	//global utilities block
-			compatible = "fsl,mpc8548-guts";
+		global-utilities@e0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
 			reg = <0xe0000 0x1000>;
+			ranges = <0 0xe0000 0x1000>;
 			fsl,has-rstcr;
-		};
 
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
+			pmc: power@70 {
+				compatible = "fsl,mpc8568-pmc",
+					     "fsl,mpc8548-pmc";
+				reg = <0x70 0x20>;
+			};
 		};
 
 		crypto@30000 {
@@ -277,6 +310,7 @@
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0xfe>;
 			fsl,descriptor-types-mask = <0x12b0ebf>;
+			sleep = <&pmc 0x01000000>;
 		};
 
 		mpic: pic@40000 {
@@ -376,6 +410,7 @@
 		compatible = "fsl,qe";
 		ranges = <0x0 0xe0080000 0x40000>;
 		reg = <0xe0080000 0x480>;
+		sleep = <&pmc 0x00000800>;
 		brg-frequency = <0>;
 		bus-frequency = <396000000>;
 		fsl,qe-num-riscs = <2>;
@@ -509,6 +544,7 @@
 		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+		sleep = <&pmc 0x80000000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
@@ -534,6 +570,7 @@
 		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
 			  0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+		sleep = <&pmc 0x20000000>;
 		clock-frequency = <33333333>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
@@ -570,5 +607,7 @@
 			      55 2 /* msg2_tx   */
 			      56 2 /* msg2_rx   */>;
 		interrupt-parent = <&mpic>;
+		sleep = <&pmc 0x00080000   /* controller */
+			 &pmc 0x00040000>; /* message unit */
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 1e3ec8f059bf..795eb362fcf9 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -41,6 +41,8 @@
 			i-cache-line-size = <32>;	// 32 bytes
 			d-cache-size = <0x8000>;		// L1, 32K
 			i-cache-size = <0x8000>;		// L1, 32K
+			sleep = <&pmc 0x00008000	// core
+				 &pmc 0x00004000>;	// timebase
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
@@ -59,6 +61,7 @@
 		reg = <0xe0005000 0x1000>;
 		interrupts = <19 2>;
 		interrupt-parent = <&mpic>;
+		sleep = <&pmc 0x08000000>;
 
 		ranges = <0x0 0x0 0xfe000000 0x02000000
 			  0x1 0x0 0xf8000000 0x00008000
@@ -158,51 +161,69 @@
 			interrupts = <18 2>;
 		};
 
-		i2c@3000 {
+		i2c-sleep-nexus {
 			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x00000004>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <43 2>;
+				interrupt-parent = <&mpic>;
+				dfsrr;
+
+				rtc@68 {
+					compatible = "dallas,ds1374";
+					reg = <0x68>;
+					interrupts = <3 1>;
+					interrupt-parent = <&mpic>;
+				};
+			};
 
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
+			i2c@3100 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				compatible = "fsl-i2c";
+				reg = <0x3100 0x100>;
+				interrupts = <43 2>;
+				interrupt-parent = <&mpic>;
+				dfsrr;
 			};
 		};
 
-		i2c@3100 {
+		duart-sleep-nexus {
 			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x00000002>;
+			ranges;
 
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
+			serial0: serial@4500 {
+				cell-index = <0>;
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x4500 0x100>;
+				clock-frequency = <0>;
+				interrupts = <42 2>;
+				interrupt-parent = <&mpic>;
+			};
 
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
+			serial1: serial@4600 {
+				cell-index = <1>;
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0x4600 0x100>;
+				clock-frequency = <0>;
+				interrupts = <42 2>;
+				interrupt-parent = <&mpic>;
+			};
 		};
 
 		L2: l2-cache-controller@20000 {
@@ -260,6 +281,7 @@
 			reg = <0x2e000 0x1000>;
 			interrupts = <72 0x8>;
 			interrupt-parent = <&mpic>;
+			sleep = <&pmc 0x00200000>;
 			/* Filled in by U-Boot */
 			clock-frequency = <0>;
 			status = "disabled";
@@ -276,6 +298,7 @@
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0xbfe>;
 			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x01000000>;
 		};
 
 		mpic: pic@40000 {
@@ -304,9 +327,18 @@
 		};
 
 		global-utilities@e0000 {
-			compatible = "fsl,mpc8569-guts";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
 			reg = <0xe0000 0x1000>;
+			ranges = <0 0xe0000 0x1000>;
 			fsl,has-rstcr;
+
+			pmc: power@70 {
+				compatible = "fsl,mpc8569-pmc",
+					     "fsl,mpc8548-pmc";
+				reg = <0x70 0x20>;
+			};
 		};
 
 		par_io@e0100 {
@@ -422,6 +454,7 @@
 		compatible = "fsl,qe";
 		ranges = <0x0 0xe0080000 0x40000>;
 		reg = <0xe0080000 0x480>;
+		sleep = <&pmc 0x00000800>;
 		brg-frequency = <0>;
 		bus-frequency = <0>;
 		fsl,qe-num-riscs = <4>;
@@ -684,6 +717,7 @@
 		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
 			  0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
+		sleep = <&pmc 0x20000000>;
 		clock-frequency = <33333333>;
 		pcie@0 {
 			reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -714,5 +748,6 @@
 			      55 2 /* msg2_tx   */
 			      56 2 /* msg2_rx   */>;
 		interrupt-parent = <&mpic>;
+		sleep = <&pmc 0x00080000>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index f468d215f716..9535ce68caae 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -35,6 +35,8 @@
 			i-cache-line-size = <32>;
 			d-cache-size = <32768>;		// L1
 			i-cache-size = <32768>;		// L1
+			sleep = <&pmc 0x00008000 0	// core
+				 &pmc 0x00004000 0>;	// timebase
 			timebase-frequency = <0>;	// From uboot
 			bus-frequency = <0>;		// From uboot
 			clock-frequency = <0>;		// From uboot
@@ -60,6 +62,7 @@
 			  5 0 0xe8480000 0x00008000
 			  6 0 0xe84c0000 0x00008000
 			  3 0 0xe8000000 0x00000020>;
+		sleep = <&pmc 0x08000000 0>;
 
 		flash@0,0 {
 			compatible = "cfi-flash";
@@ -105,6 +108,8 @@
 			compatible = "fsl,fpga-pixis";
 			reg = <3 0 0x20>;
 			ranges = <0 3 0 0x20>;
+			interrupt-parent = <&mpic>;
+			interrupts = <8 8>;
 
 			sdcsr_pio: gpio-controller@a {
 				#gpio-cells = <2>;
@@ -163,6 +168,7 @@
 			reg = <0x3100 0x100>;
 			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
+			sleep = <&pmc 0x00000004 0>;
 			dfsrr;
 		};
 
@@ -174,6 +180,7 @@
 			clock-frequency = <0>;
 			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
+			sleep = <&pmc 0x00000002 0>;
 		};
 
 		serial1: serial@4600 {
@@ -184,6 +191,7 @@
 			clock-frequency = <0>;
 			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
+			sleep = <&pmc 0x00000008 0>;
 		};
 
 		spi@7000 {
@@ -196,6 +204,7 @@
 			interrupt-parent = <&mpic>;
 			mode = "cpu";
 			gpios = <&sdcsr_pio 7 0>;
+			sleep = <&pmc 0x00000800 0>;
 
 			mmc-slot@0 {
 				compatible = "fsl,mpc8610hpcd-mmc-slot",
@@ -213,6 +222,7 @@
 			reg = <0x2c000 100>;
 			interrupts = <72 2>;
 			interrupt-parent = <&mpic>;
+			sleep = <&pmc 0x04000000 0>;
 		};
 
 		mpic: interrupt-controller@40000 {
@@ -241,9 +251,18 @@
 		};
 
 		global-utilities@e0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			compatible = "fsl,mpc8610-guts";
 			reg = <0xe0000 0x1000>;
+			ranges = <0 0xe0000 0x1000>;
 			fsl,has-rstcr;
+
+			pmc: power@70 {
+				compatible = "fsl,mpc8610-pmc",
+					     "fsl,mpc8641d-pmc";
+				reg = <0x70 0x20>;
+			};
 		};
 
 		wdt@e4000 {
@@ -262,6 +281,7 @@
 			fsl,playback-dma = <&dma00>;
 			fsl,capture-dma = <&dma01>;
 			fsl,fifo-depth = <8>;
+			sleep = <&pmc 0 0x08000000>;
 		};
 
 		ssi@16100 {
@@ -271,6 +291,7 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <63 2>;
 			fsl,fifo-depth = <8>;
+			sleep = <&pmc 0 0x04000000>;
 		};
 
 		dma@21300 {
@@ -280,6 +301,7 @@
 			cell-index = <0>;
 			reg = <0x21300 0x4>; /* DMA general status register */
 			ranges = <0x0 0x21100 0x200>;
+			sleep = <&pmc 0x00000400 0>;
 
 			dma00: dma-channel@0 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -322,6 +344,7 @@
 			cell-index = <1>;
 			reg = <0xc300 0x4>; /* DMA general status register */
 			ranges = <0x0 0xc100 0x200>;
+			sleep = <&pmc 0x00000200 0>;
 
 			dma-channel@0 {
 				compatible = "fsl,mpc8610-dma-channel",
@@ -369,6 +392,7 @@
 		bus-range = <0 0>;
 		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 			  0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>;
+		sleep = <&pmc 0x80000000 0>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;
@@ -398,6 +422,7 @@
 		bus-range = <1 3>;
 		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
 			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+		sleep = <&pmc 0x40000000 0>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <26 2>;
@@ -474,6 +499,7 @@
 				 0x0000 0 0 4 &mpic 7 1>;
 		interrupt-parent = <&mpic>;
 		interrupts = <25 2>;
+		sleep = <&pmc 0x20000000 0>;
 		clock-frequency = <33333333>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts
new file mode 100644
index 000000000000..df5269093af8
--- /dev/null
+++ b/arch/powerpc/boot/dts/p1020rdb.dts
@@ -0,0 +1,477 @@
+/*
+ * P1020 RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P1020";
+	compatible = "fsl,P1020RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 256KB for Vitesse 7385 Switch firmware */
+				reg = <0x0 0x00040000>;
+				label = "NOR (RO) Vitesse-7385 Firmware";
+				read-only;
+			};
+
+			partition@40000 {
+				/* 256KB for DTB Image */
+				reg = <0x00040000 0x00040000>;
+				label = "NOR (RO) DTB Image";
+				read-only;
+			};
+
+			partition@80000 {
+				/* 3.5 MB for Linux Kernel Image */
+				reg = <0x00080000 0x00380000>;
+				label = "NOR (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@400000 {
+				/* 11MB for JFFS2 based Root file System */
+				reg = <0x00400000 0x00b00000>;
+				label = "NOR (RW) JFFS2 Root File System";
+			};
+
+			partition@f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x00f00000 0x00100000>;
+				label = "NOR (RO) U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1020-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND (RO) DTB Image";
+				read-only;
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@600000 {
+				/* 4MB for Compressed Root file System Image */
+				reg = <0x00600000 0x00400000>;
+				label = "NAND (RO) Compressed RFS Image";
+				read-only;
+			};
+
+			partition@a00000 {
+				/* 7MB for JFFS2 based Root file System */
+				reg = <0x00a00000 0x00700000>;
+				label = "NAND (RW) JFFS2 Root File System";
+			};
+
+			partition@1100000 {
+				/* 15MB for JFFS2 based Root file System */
+				reg = <0x01100000 0x00f00000>;
+				label = "NAND (RW) Writable User area";
+			};
+		};
+
+		L2switch@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "vitesse-7385";
+			reg = <0x2 0x0 0x20000>;
+		};
+
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p1020-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p1020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <16 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p1020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				modal = "s25sl128b";
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI (RO) U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image */
+					reg = <0x00080000 0x00080000>;
+					label = "SPI (RO) DTB Image";
+					read-only;
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI (RO) Linux Kernel Image";
+					read-only;
+				};
+
+				partition@500000 {
+					/* 4MB for Compressed RFS Image */
+					reg = <0x00500000 0x00400000>;
+					label = "SPI (RO) Compressed RFS Image";
+					read-only;
+				};
+
+				partition@900000 {
+					/* 7MB for JFFS2 based RFS */
+					reg = <0x00900000 0x00700000>;
+					label = "SPI (RW) JFFS2 RFS";
+				};
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p1020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>; // L2,256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		usb@23000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <46 0x2>;
+			phy_type = "ulpi";
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p1020-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p1020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
new file mode 100644
index 000000000000..0fe93d0c8b2e
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
@@ -0,0 +1,363 @@
+/*
+ * P2020 RDB  Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, spi, gpio, dma1, usb,
+ * eth1, eth2, sdhc, crypto, global-util, pci0.
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P2020";
+	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p2020-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p2020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p2020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				modal = "s25sl128b";
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI (RO) U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image */
+					reg = <0x00080000 0x00080000>;
+					label = "SPI (RO) DTB Image";
+					read-only;
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI (RO) Linux Kernel Image";
+					read-only;
+				};
+
+				partition@500000 {
+					/* 4MB for Compressed RFS Image */
+					reg = <0x00500000 0x00400000>;
+					label = "SPI (RO) Compressed RFS Image";
+					read-only;
+				};
+
+				partition@900000 {
+					/* 7MB for JFFS2 based RFS */
+					reg = <0x00900000 0x00700000>;
+					label = "SPI (RW) JFFS2 RFS";
+				};
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p2020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>; // L2,512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3 1>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3 1>;
+				reg = <0x1>;
+			};
+		};
+
+		mdio@25520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			protected-sources = <
+			42 76 77 78 79 /* serial1 , dma2 */
+			29 30 34 26 /* enet0, pci1 */
+			0xe0 0xe1 0xe2 0xe3 /* msi */
+			0xe4 0xe5 0xe6 0xe7
+			>;
+		};
+
+		global-utilities@e0000 {
+			compatible = "fsl,p2020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
new file mode 100644
index 000000000000..e95a51285328
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
@@ -0,0 +1,184 @@
+/*
+ * P2020 RDB Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, dma2, eth0, pci1, msi.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P2020";
+	compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		serial0 = &serial0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p2020-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		serial0: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p2020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>; // L2,512K
+			interrupt-parent = <&mpic>;
+		};
+
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			protected-sources = <
+			17 18 43 42 59 47 /*ecm, mem, i2c, serial0, spi,gpio */
+			16 20 21 22 23 28 	/* L2, dma1, USB */
+			03 35 36 40 31 32 33 	/* mdio, enet1, enet2 */
+			72 45 58 25 		/* sdhci, crypto , pci */
+			>;
+		};
+
+		msi@41600 {
+			compatible = "fsl,p2020-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index 28980738776c..6cd2cd65c2cd 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -218,7 +218,7 @@ CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index e199d1cacbaf..a6a3768f7304 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -218,7 +218,7 @@ CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 3b0fbfb28efd..1975d41e0763 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -219,7 +219,7 @@ CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
@@ -1124,7 +1124,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
+CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 24d79e3abd8e..0835eb977ba9 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -3,8 +3,47 @@
 
 #include <linux/compiler.h>
 #include <linux/types.h>
+#include <linux/errno.h>
 #include <linux/of.h>
 
+/*
+ * USB Controller pram common to QE and CPM.
+ */
+struct usb_ctlr {
+	u8	usb_usmod;
+	u8	usb_usadr;
+	u8	usb_uscom;
+	u8	res1[1];
+	__be16	usb_usep[4];
+	u8	res2[4];
+	__be16	usb_usber;
+	u8	res3[2];
+	__be16	usb_usbmr;
+	u8	res4[1];
+	u8	usb_usbs;
+	/* Fields down below are QE-only */
+	__be16	usb_ussft;
+	u8	res5[2];
+	__be16	usb_usfrn;
+	u8	res6[0x22];
+} __attribute__ ((packed));
+
+/*
+ * Function code bits, usually generic to devices.
+ */
+#ifdef CONFIG_CPM1
+#define CPMFCR_GBL	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
+#define CPMFCR_TC2	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
+#define CPMFCR_DTB	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
+#define CPMFCR_BDB	((u_char)0x00)	/* Flag doesn't exist in CPM1 */
+#else
+#define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
+#define CPMFCR_TC2	((u_char)0x04)	/* Transfer code 2 value */
+#define CPMFCR_DTB	((u_char)0x02)	/* Use local bus for data when set */
+#define CPMFCR_BDB	((u_char)0x01)	/* Use local bus for BD when set */
+#endif
+#define CPMFCR_EB	((u_char)0x10)	/* Set big endian byte order */
+
 /* Opcodes common to CPM1 and CPM2
 */
 #define CPM_CR_INIT_TRX		((ushort)0x0000)
@@ -93,13 +132,56 @@ typedef struct cpm_buf_desc {
 #define BD_I2C_START		(0x0400)
 
 int cpm_muram_init(void);
+
+#if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE)
 unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
 int cpm_muram_free(unsigned long offset);
 unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
 void __iomem *cpm_muram_addr(unsigned long offset);
 unsigned long cpm_muram_offset(void __iomem *addr);
 dma_addr_t cpm_muram_dma(void __iomem *addr);
+#else
+static inline unsigned long cpm_muram_alloc(unsigned long size,
+					    unsigned long align)
+{
+	return -ENOSYS;
+}
+
+static inline int cpm_muram_free(unsigned long offset)
+{
+	return -ENOSYS;
+}
+
+static inline unsigned long cpm_muram_alloc_fixed(unsigned long offset,
+						  unsigned long size)
+{
+	return -ENOSYS;
+}
+
+static inline void __iomem *cpm_muram_addr(unsigned long offset)
+{
+	return NULL;
+}
+
+static inline unsigned long cpm_muram_offset(void __iomem *addr)
+{
+	return -ENOSYS;
+}
+
+static inline dma_addr_t cpm_muram_dma(void __iomem *addr)
+{
+	return 0;
+}
+#endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */
+
+#ifdef CONFIG_CPM
 int cpm_command(u32 command, u8 opcode);
+#else
+static inline int cpm_command(u32 command, u8 opcode)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_CPM */
 
 int cpm2_gpiochip_add32(struct device_node *np);
 
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
index 7685ffde8821..81b01192f440 100644
--- a/arch/powerpc/include/asm/cpm1.h
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -478,51 +478,6 @@ typedef struct iic {
 	char	res2[2];	/* Reserved */
 } iic_t;
 
-/* SPI parameter RAM.
-*/
-typedef struct spi {
-	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
-	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
-	u_char	spi_rfcr;	/* Rx function code */
-	u_char	spi_tfcr;	/* Tx function code */
-	ushort	spi_mrblr;	/* Max receive buffer length */
-	uint	spi_rstate;	/* Internal */
-	uint	spi_rdp;	/* Internal */
-	ushort	spi_rbptr;	/* Internal */
-	ushort	spi_rbc;	/* Internal */
-	uint	spi_rxtmp;	/* Internal */
-	uint	spi_tstate;	/* Internal */
-	uint	spi_tdp;	/* Internal */
-	ushort	spi_tbptr;	/* Internal */
-	ushort	spi_tbc;	/* Internal */
-	uint	spi_txtmp;	/* Internal */
-	uint	spi_res;
-	ushort	spi_rpbase;	/* Relocation pointer */
-	ushort	spi_res2;
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
-#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
-#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
-#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
-#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
-#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
-#define SPMODE_EN	((ushort)0x0100)	/* Enable */
-#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
-#define SPMODE_LEN4	((ushort)0x0030)	/*  4 bits per char */
-#define SPMODE_LEN8	((ushort)0x0070)	/*  8 bits per char */
-#define SPMODE_LEN16	((ushort)0x00f0)	/* 16 bits per char */
-#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
-
-/* SPIE fields */
-#define SPIE_MME	0x20
-#define SPIE_TXE	0x10
-#define SPIE_BSY	0x04
-#define SPIE_TXB	0x02
-#define SPIE_RXB	0x01
-
 /*
  * RISC Controller Configuration Register definitons
  */
diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h
index 990ff191da8b..f42e9baf3a4e 100644
--- a/arch/powerpc/include/asm/cpm2.h
+++ b/arch/powerpc/include/asm/cpm2.h
@@ -124,14 +124,6 @@ static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
 	__cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
 }
 
-/* Function code bits, usually generic to devices.
-*/
-#define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
-#define CPMFCR_EB	((u_char)0x10)	/* Set big endian byte order */
-#define CPMFCR_TC2	((u_char)0x04)	/* Transfer code 2 value */
-#define CPMFCR_DTB	((u_char)0x02)	/* Use local bus for data when set */
-#define CPMFCR_BDB	((u_char)0x01)	/* Use local bus for BD when set */
-
 /* Parameter RAM offsets from the base.
 */
 #define PROFF_SCC1		((uint)0x8000)
@@ -654,45 +646,6 @@ typedef struct iic {
 	uint	iic_txtmp;	/* Internal */
 } iic_t;
 
-/* SPI parameter RAM.
-*/
-typedef struct spi {
-	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
-	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
-	u_char	spi_rfcr;	/* Rx function code */
-	u_char	spi_tfcr;	/* Tx function code */
-	ushort	spi_mrblr;	/* Max receive buffer length */
-	uint	spi_rstate;	/* Internal */
-	uint	spi_rdp;	/* Internal */
-	ushort	spi_rbptr;	/* Internal */
-	ushort	spi_rbc;	/* Internal */
-	uint	spi_rxtmp;	/* Internal */
-	uint	spi_tstate;	/* Internal */
-	uint	spi_tdp;	/* Internal */
-	ushort	spi_tbptr;	/* Internal */
-	ushort	spi_tbc;	/* Internal */
-	uint	spi_txtmp;	/* Internal */
-	uint	spi_res;	/* Tx temp. */
-	uint	spi_res1[4];	/* SDMA temp. */
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
-#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
-#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
-#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
-#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
-#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
-#define SPMODE_EN	((ushort)0x0100)	/* Enable */
-#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
-#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
-
-#define SPMODE_LEN(x)	((((x)-1)&0xF)<<4)
-#define SPMODE_PM(x)	((x) &0xF)
-
-#define SPI_EB		((u_char)0x10)		/* big endian byte order */
-
 /* IDMA parameter RAM
 */
 typedef struct idma {
diff --git a/arch/powerpc/include/asm/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h
index d4f069bf0e57..7c64fda5357b 100644
--- a/arch/powerpc/include/asm/immap_cpm2.h
+++ b/arch/powerpc/include/asm/immap_cpm2.h
@@ -549,7 +549,7 @@ typedef struct comm_proc {
 
 /* USB Controller.
 */
-typedef struct usb_ctlr {
+typedef struct cpm_usb_ctlr {
 	u8	usb_usmod;
 	u8	usb_usadr;
 	u8	usb_uscom;
diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
index c346d0bcd230..4e10f508570a 100644
--- a/arch/powerpc/include/asm/immap_qe.h
+++ b/arch/powerpc/include/asm/immap_qe.h
@@ -210,7 +210,7 @@ struct sir {
 } __attribute__ ((packed));
 
 /* USB Controller */
-struct usb_ctlr {
+struct qe_usb_ctlr {
 	u8	usb_usmod;
 	u8	usb_usadr;
 	u8	usb_uscom;
@@ -229,7 +229,7 @@ struct usb_ctlr {
 } __attribute__ ((packed));
 
 /* MCC */
-struct mcc {
+struct qe_mcc {
 	__be32	mcce;		/* MCC event register */
 	__be32	mccm;		/* MCC mask register */
 	__be32	mccf;		/* MCC configuration register */
@@ -431,9 +431,9 @@ struct qe_immap {
 	struct qe_mux		qmx;		/* QE Multiplexer */
 	struct qe_timers	qet;		/* QE Timers */
 	struct spi		spi[0x2];	/* spi */
-	struct mcc		mcc;		/* mcc */
+	struct qe_mcc		mcc;		/* mcc */
 	struct qe_brg		brg;		/* brg */
-	struct usb_ctlr		usb;		/* USB */
+	struct qe_usb_ctlr	usb;		/* USB */
 	struct si1		si1;		/* SI */
 	u8			res11[0x800];
 	struct sir		sir;		/* SI Routing Tables */
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index f388f0ab193f..0947b36e534c 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -87,7 +87,7 @@ extern spinlock_t cmxgcr_lock;
 
 /* Export QE common operations */
 #ifdef CONFIG_QUICC_ENGINE
-extern void __init qe_reset(void);
+extern void qe_reset(void);
 #else
 static inline void qe_reset(void) {}
 #endif
@@ -145,8 +145,17 @@ static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {}
 static inline void qe_pin_set_dedicated(struct qe_pin *pin) {}
 #endif /* CONFIG_QE_GPIO */
 
-/* QE internal API */
+#ifdef CONFIG_QUICC_ENGINE
 int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+#else
+static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol,
+			       u32 cmd_input)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+/* QE internal API */
 enum qe_clock qe_clock_source(const char *source);
 unsigned int qe_get_brg_clk(void);
 int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
@@ -154,7 +163,28 @@ int qe_get_snum(void);
 void qe_put_snum(u8 snum);
 unsigned int qe_get_num_of_risc(void);
 unsigned int qe_get_num_of_snums(void);
-int qe_alive_during_sleep(void);
+
+static inline int qe_alive_during_sleep(void)
+{
+	/*
+	 * MPC8568E reference manual says:
+	 *
+	 * "...power down sequence waits for all I/O interfaces to become idle.
+	 *  In some applications this may happen eventually without actively
+	 *  shutting down interfaces, but most likely, software will have to
+	 *  take steps to shut down the eTSEC, QUICC Engine Block, and PCI
+	 *  interfaces before issuing the command (either the write to the core
+	 *  MSR[WE] as described above or writing to POWMGTCSR) to put the
+	 *  device into sleep state."
+	 *
+	 * MPC8569E reference manual has a similar paragraph.
+	 */
+#ifdef CONFIG_PPC_85xx
+	return 0;
+#else
+	return 1;
+#endif
+}
 
 /* we actually use cpm_muram implementation, define this for convenience */
 #define qe_muram_init cpm_muram_init
@@ -210,8 +240,15 @@ struct qe_firmware_info {
 	u64 extended_modes;	/* Extended modes */
 };
 
+#ifdef CONFIG_QUICC_ENGINE
 /* Upload a firmware to the QE */
 int qe_upload_firmware(const struct qe_firmware *firmware);
+#else
+static inline int qe_upload_firmware(const struct qe_firmware *firmware)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
 
 /* Obtain information on the uploaded firmware */
 struct qe_firmware_info *qe_get_firmware_info(void);
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index e2e2082acf29..a6c2b63227b3 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -421,9 +421,6 @@ int main(void)
 	DEFINE(PGD_T_LOG2, PGD_T_LOG2);
 	DEFINE(PTE_T_LOG2, PTE_T_LOG2);
 #endif
-#ifdef CONFIG_FSL_BOOKE
-	DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam));
-#endif
 
 #ifdef CONFIG_KVM_EXIT_TIMING
 	DEFINE(VCPU_TIMING_EXIT_TBU, offsetof(struct kvm_vcpu,
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 975788ca05d2..7f4bd7f3b6af 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -944,28 +944,6 @@ _GLOBAL(__setup_e500mc_ivors)
 	blr
 
 /*
- * extern void loadcam_entry(unsigned int index)
- *
- * Load TLBCAM[index] entry in to the L2 CAM MMU
- */
-_GLOBAL(loadcam_entry)
-	lis	r4,TLBCAM@ha
-	addi	r4,r4,TLBCAM@l
-	mulli	r5,r3,TLBCAM_SIZE
-	add	r3,r5,r4
-	lwz	r4,0(r3)
-	mtspr	SPRN_MAS0,r4
-	lwz	r4,4(r3)
-	mtspr	SPRN_MAS1,r4
-	lwz	r4,8(r3)
-	mtspr	SPRN_MAS2,r4
-	lwz	r4,12(r3)
-	mtspr	SPRN_MAS3,r4
-	tlbwe
-	isync
-	blr
-
-/*
  * extern void giveup_altivec(struct task_struct *prev)
  *
  * The e500 core does not have an AltiVec unit.
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index dc93e95b256e..fcfcb6e976c7 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -54,26 +54,35 @@
 
 #include "mmu_decl.h"
 
-extern void loadcam_entry(unsigned int index);
 unsigned int tlbcam_index;
-static unsigned long cam[CONFIG_LOWMEM_CAM_NUM];
 
-#define NUM_TLBCAMS	(16)
+#define NUM_TLBCAMS	(64)
 
 #if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
 #error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS"
 #endif
 
-struct tlbcam TLBCAM[NUM_TLBCAMS];
+struct tlbcam {
+	u32	MAS0;
+	u32	MAS1;
+	unsigned long	MAS2;
+	u32	MAS3;
+	u32	MAS7;
+} TLBCAM[NUM_TLBCAMS];
 
 struct tlbcamrange {
-   	unsigned long start;
+	unsigned long start;
 	unsigned long limit;
 	phys_addr_t phys;
 } tlbcam_addrs[NUM_TLBCAMS];
 
 extern unsigned int tlbcam_index;
 
+unsigned long tlbcam_sz(int idx)
+{
+	return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1;
+}
+
 /*
  * Return PA for this VA if it is mapped by a CAM, or 0
  */
@@ -94,23 +103,36 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa)
 	int b;
 	for (b = 0; b < tlbcam_index; ++b)
 		if (pa >= tlbcam_addrs[b].phys
-	    	    && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
+			&& pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
 		              +tlbcam_addrs[b].phys)
 			return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys);
 	return 0;
 }
 
+void loadcam_entry(int idx)
+{
+	mtspr(SPRN_MAS0, TLBCAM[idx].MAS0);
+	mtspr(SPRN_MAS1, TLBCAM[idx].MAS1);
+	mtspr(SPRN_MAS2, TLBCAM[idx].MAS2);
+	mtspr(SPRN_MAS3, TLBCAM[idx].MAS3);
+
+	if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS)
+		mtspr(SPRN_MAS7, TLBCAM[idx].MAS7);
+
+	asm volatile("isync;tlbwe;isync" : : : "memory");
+}
+
 /*
  * Set up one of the I/D BAT (block address translation) register pairs.
  * The parameters are not checked; in particular size must be a power
  * of 4 between 4k and 256M.
  */
-void settlbcam(int index, unsigned long virt, phys_addr_t phys,
-		unsigned int size, int flags, unsigned int pid)
+static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
+		unsigned long size, unsigned long flags, unsigned int pid)
 {
 	unsigned int tsize, lz;
 
-	asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
+	asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (size));
 	tsize = 21 - lz;
 
 #ifdef CONFIG_SMP
@@ -128,8 +150,10 @@ void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 	TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0;
 	TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0;
 
-	TLBCAM[index].MAS3 = (phys & PAGE_MASK) | MAS3_SX | MAS3_SR;
+	TLBCAM[index].MAS3 = (phys & MAS3_RPN) | MAS3_SX | MAS3_SR;
 	TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0);
+	if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS)
+		TLBCAM[index].MAS7 = (u64)phys >> 32;
 
 #ifndef CONFIG_KGDB /* want user access for breakpoints */
 	if (flags & _PAGE_USER) {
@@ -148,27 +172,44 @@ void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 	loadcam_entry(index);
 }
 
-void invalidate_tlbcam_entry(int index)
-{
-	TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index);
-	TLBCAM[index].MAS1 = ~MAS1_VALID;
-
-	loadcam_entry(index);
-}
-
-unsigned long __init mmu_mapin_ram(void)
+unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
 {
+	int i;
 	unsigned long virt = PAGE_OFFSET;
 	phys_addr_t phys = memstart_addr;
+	unsigned long amount_mapped = 0;
+	unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
+
+	/* Convert (4^max) kB to (2^max) bytes */
+	max_cam = max_cam * 2 + 10;
 
-	while (tlbcam_index < ARRAY_SIZE(cam) && cam[tlbcam_index]) {
-		settlbcam(tlbcam_index, virt, phys, cam[tlbcam_index], PAGE_KERNEL_X, 0);
-		virt += cam[tlbcam_index];
-		phys += cam[tlbcam_index];
-		tlbcam_index++;
+	/* Calculate CAM values */
+	for (i = 0; ram && i < max_cam_idx; i++) {
+		unsigned int camsize = __ilog2(ram) & ~1U;
+		unsigned int align = __ffs(virt | phys) & ~1U;
+		unsigned long cam_sz;
+
+		if (camsize > align)
+			camsize = align;
+		if (camsize > max_cam)
+			camsize = max_cam;
+
+		cam_sz = 1UL << camsize;
+		settlbcam(i, virt, phys, cam_sz, PAGE_KERNEL_X, 0);
+
+		ram -= cam_sz;
+		amount_mapped += cam_sz;
+		virt += cam_sz;
+		phys += cam_sz;
 	}
+	tlbcam_index = i;
+
+	return amount_mapped;
+}
 
-	return virt - PAGE_OFFSET;
+unsigned long __init mmu_mapin_ram(void)
+{
+	return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1;
 }
 
 /*
@@ -179,46 +220,21 @@ void __init MMU_init_hw(void)
 	flush_instruction_cache();
 }
 
-void __init
-adjust_total_lowmem(void)
+void __init adjust_total_lowmem(void)
 {
-	phys_addr_t ram;
-	unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xff;
-	char buf[ARRAY_SIZE(cam) * 5 + 1], *p = buf;
+	unsigned long ram;
 	int i;
-	unsigned long virt = PAGE_OFFSET & 0xffffffffUL;
-	unsigned long phys = memstart_addr & 0xffffffffUL;
-
-	/* Convert (4^max) kB to (2^max) bytes */
-	max_cam = max_cam * 2 + 10;
 
 	/* adjust lowmem size to __max_low_memory */
 	ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
 
-	/* Calculate CAM values */
-	__max_low_memory = 0;
-	for (i = 0; ram && i < ARRAY_SIZE(cam); i++) {
-		unsigned int camsize = __ilog2(ram) & ~1U;
-		unsigned int align = __ffs(virt | phys) & ~1U;
+	__max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM);
 
-		if (camsize > align)
-			camsize = align;
-		if (camsize > max_cam)
-			camsize = max_cam;
-
-		cam[i] = 1UL << camsize;
-		ram -= cam[i];
-		__max_low_memory += cam[i];
-		virt += cam[i];
-		phys += cam[i];
-
-		p += sprintf(p, "%lu/", cam[i] >> 20);
-	}
-	for (; i < ARRAY_SIZE(cam); i++)
-		p += sprintf(p, "0/");
-	p[-1] = '\0';
-
-	pr_info("Memory CAM mapping: %s Mb, residual: %dMb\n", buf,
+	pr_info("Memory CAM mapping: ");
+	for (i = 0; i < tlbcam_index - 1; i++)
+		pr_cont("%lu/", tlbcam_sz(i) >> 20);
+	pr_cont("%lu Mb, residual: %dMb\n", tlbcam_sz(tlbcam_index - 1) >> 20,
 	        (unsigned int)((total_lowmem - __max_low_memory) >> 20));
+
 	__initial_memory_limit_addr = memstart_addr + __max_low_memory;
 }
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index d2e5321d5ea6..e27a990af42d 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -98,21 +98,10 @@ extern void _tlbia(void);
 
 #ifdef CONFIG_PPC32
 
-struct tlbcam {
-	u32	MAS0;
-	u32	MAS1;
-	u32	MAS2;
-	u32	MAS3;
-	u32	MAS7;
-};
-
 extern void mapin_ram(void);
 extern int map_page(unsigned long va, phys_addr_t pa, int flags);
 extern void setbat(int index, unsigned long virt, phys_addr_t phys,
 		   unsigned int size, int flags);
-extern void settlbcam(int index, unsigned long virt, phys_addr_t phys,
-		      unsigned int size, int flags, unsigned int pid);
-extern void invalidate_tlbcam_entry(int index);
 
 extern int __map_without_bats;
 extern unsigned long ioremap_base;
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index 08e65fc8b98c..d306f07b9aa1 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -96,6 +96,7 @@ int fsl_deep_sleep(void)
 {
 	return deep_sleeping;
 }
+EXPORT_SYMBOL(fsl_deep_sleep);
 
 static int mpc83xx_change_state(void)
 {
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index d3a975e8fd3e..5de0d633836c 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -1,6 +1,7 @@
-menuconfig MPC85xx
-	bool "Machine Type"
-	depends on PPC_85xx
+menuconfig FSL_SOC_BOOKE
+	bool "Freescale Book-E Machine Type"
+	depends on PPC_85xx || PPC_BOOK3E
+	select FSL_SOC
 	select PPC_UDBG_16550
 	select MPIC
 	select PPC_PCI_CHOICE
@@ -8,7 +9,7 @@ menuconfig MPC85xx
 	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
 	default y
 
-if MPC85xx
+if FSL_SOC_BOOKE
 
 config MPC8540_ADS
 	bool "Freescale MPC8540 ADS"
@@ -144,7 +145,7 @@ config SBC8560
 	help
 	  This option enables support for the Wind River SBC8560 board
 
-endif # MPC85xx
+endif # FSL_SOC_BOOKE
 
 config TQM85xx
 	bool
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 3909d57b86e3..c5028a2e5a58 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -301,6 +301,7 @@ static struct of_device_id mpc85xx_ids[] = {
 	{ .compatible = "fsl,qe", },
 	{ .compatible = "gianfar", },
 	{ .compatible = "fsl,rapidio-delta", },
+	{ .compatible = "fsl,mpc8548-guts", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index c8468de4acf6..088f30b0c088 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -44,6 +44,7 @@ void __init mpc85xx_rdb_pic_init(void)
 	struct mpic *mpic;
 	struct resource r;
 	struct device_node *np;
+	unsigned long root = of_get_flat_dt_root();
 
 	np = of_find_node_by_type(NULL, "open-pic");
 	if (np == NULL) {
@@ -57,11 +58,18 @@ void __init mpc85xx_rdb_pic_init(void)
 		return;
 	}
 
-	mpic = mpic_alloc(np, r.start,
+	if (of_flat_dt_is_compatible(root, "fsl,85XXRDB-CAMP")) {
+		mpic = mpic_alloc(np, r.start,
+			MPIC_PRIMARY |
+			MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
+			0, 256, " OpenPIC  ");
+	} else {
+		mpic = mpic_alloc(np, r.start,
 		  MPIC_PRIMARY | MPIC_WANTS_RESET |
 		  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
 		  MPIC_SINGLE_DEST_CPU,
 		  0, 256, " OpenPIC  ");
+	}
 
 	BUG_ON(mpic == NULL);
 	of_node_put(np);
@@ -113,6 +121,7 @@ static int __init mpc85xxrdb_publish_devices(void)
 	return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL);
 }
 machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices);
+machine_device_initcall(p1020_rdb, mpc85xxrdb_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -126,6 +135,15 @@ static int __init p2020_rdb_probe(void)
 	return 0;
 }
 
+static int __init p1020_rdb_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,P1020RDB"))
+		return 1;
+	return 0;
+}
+
 define_machine(p2020_rdb) {
 	.name			= "P2020 RDB",
 	.probe			= p2020_rdb_probe,
@@ -139,3 +157,17 @@ define_machine(p2020_rdb) {
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
 };
+
+define_machine(p1020_rdb) {
+	.name			= "P1020 RDB",
+	.probe			= p1020_rdb_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 9c7b64a3402b..2bbfd530d6d8 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -35,6 +35,7 @@ config MPC8610_HPCD
 config GEF_PPC9A
 	bool "GE Fanuc PPC9A"
 	select DEFAULT_UIMAGE
+	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
@@ -43,6 +44,7 @@ config GEF_PPC9A
 config GEF_SBC310
 	bool "GE Fanuc SBC310"
 	select DEFAULT_UIMAGE
+	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
@@ -51,6 +53,7 @@ config GEF_SBC310
 config GEF_SBC610
 	bool "GE Fanuc SBC610"
 	select DEFAULT_UIMAGE
+	select MMIO_NVRAM
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	select HAS_RAPIDIO
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index 287f7bd17dd9..a792e5d85813 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -33,6 +33,7 @@
 #include <asm/udbg.h>
 
 #include <asm/mpic.h>
+#include <asm/nvram.h>
 
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
@@ -95,6 +96,10 @@ static void __init gef_ppc9a_setup_arch(void)
 			printk(KERN_WARNING "Unable to map board registers\n");
 		of_node_put(regs);
 	}
+
+#if defined(CONFIG_MMIO_NVRAM)
+	mmio_nvram_init();
+#endif
 }
 
 /* Return the PCB revision */
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index 90754e752bd8..6a1a613836c2 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -33,6 +33,7 @@
 #include <asm/udbg.h>
 
 #include <asm/mpic.h>
+#include <asm/nvram.h>
 
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
@@ -95,6 +96,10 @@ static void __init gef_sbc310_setup_arch(void)
 			printk(KERN_WARNING "Unable to map board registers\n");
 		of_node_put(regs);
 	}
+
+#if defined(CONFIG_MMIO_NVRAM)
+	mmio_nvram_init();
+#endif
 }
 
 /* Return the PCB revision */
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index 72b31a6010a0..e10688a0fc4e 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -33,6 +33,7 @@
 #include <asm/udbg.h>
 
 #include <asm/mpic.h>
+#include <asm/nvram.h>
 
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
@@ -95,6 +96,10 @@ static void __init gef_sbc610_setup_arch(void)
 			printk(KERN_WARNING "Unable to map board registers\n");
 		of_node_put(regs);
 	}
+
+#if defined(CONFIG_MMIO_NVRAM)
+	mmio_nvram_init();
+#endif
 }
 
 /* Return the PCB revision */
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 627908a4cd77..5abe137f6309 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -19,6 +19,7 @@
 #include <linux/stddef.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/interrupt.h>
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
@@ -41,10 +42,46 @@
 
 #include "mpc86xx.h"
 
+static struct device_node *pixis_node;
 static unsigned char *pixis_bdcfg0, *pixis_arch;
 
+#ifdef CONFIG_SUSPEND
+static irqreturn_t mpc8610_sw9_irq(int irq, void *data)
+{
+	pr_debug("%s: PIXIS' event (sw9/wakeup) IRQ handled\n", __func__);
+	return IRQ_HANDLED;
+}
+
+static void __init mpc8610_suspend_init(void)
+{
+	int irq;
+	int ret;
+
+	if (!pixis_node)
+		return;
+
+	irq = irq_of_parse_and_map(pixis_node, 0);
+	if (!irq) {
+		pr_err("%s: can't map pixis event IRQ.\n", __func__);
+		return;
+	}
+
+	ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9/wakeup", NULL);
+	if (ret) {
+		pr_err("%s: can't request pixis event IRQ: %d\n",
+		       __func__, ret);
+		irq_dispose_mapping(irq);
+	}
+
+	enable_irq_wake(irq);
+}
+#else
+static inline void mpc8610_suspend_init(void) { }
+#endif /* CONFIG_SUSPEND */
+
 static struct of_device_id __initdata mpc8610_ids[] = {
 	{ .compatible = "fsl,mpc8610-immr", },
+	{ .compatible = "fsl,mpc8610-guts", },
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
 	{}
@@ -55,6 +92,9 @@ static int __init mpc8610_declare_of_platform_devices(void)
 	/* Firstly, register PIXIS GPIOs. */
 	simple_gpiochip_init("fsl,fpga-pixis-gpio-bank");
 
+	/* Enable wakeup on PIXIS' event IRQ. */
+	mpc8610_suspend_init();
+
 	/* Without this call, the SSI device driver won't get probed. */
 	of_platform_bus_probe(NULL, mpc8610_ids, NULL);
 
@@ -250,10 +290,10 @@ static void __init mpc86xx_hpcd_setup_arch(void)
 	diu_ops.set_sysfs_monitor_port	= mpc8610hpcd_set_sysfs_monitor_port;
 #endif
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
-	if (np) {
-		of_address_to_resource(np, 0, &r);
-		of_node_put(np);
+	pixis_node = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
+	if (pixis_node) {
+		of_address_to_resource(pixis_node, 0, &r);
+		of_node_put(pixis_node);
 		pixis = ioremap(r.start, 32);
 		if (!pixis) {
 			printk(KERN_ERR "Err: can't map FPGA cfg register!\n");
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 56bf12692f37..11c0852534d4 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -260,7 +260,7 @@ config QE_GPIO
 
 config CPM2
 	bool "Enable support for the CPM2 (Communications Processor Module)"
-	depends on MPC85xx || 8260
+	depends on (FSL_SOC_BOOKE && PPC32) || 8260
 	select CPM
 	select PPC_LIB_RHEAP
 	select PPC_PCI_CHOICE
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index e382cae678b8..2eab27a94cc9 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -28,8 +28,6 @@ config PPC_BOOK3S_32
 config PPC_85xx
 	bool "Freescale 85xx"
 	select E500
-	select FSL_SOC
-	select MPC85xx
 
 config PPC_8xx
 	bool "Freescale 8xx"
@@ -138,6 +136,14 @@ config PPC_FPU
 	bool
 	default y if PPC64
 
+config FSL_EMB_PERFMON
+	bool "Freescale Embedded Perfmon"
+	depends on E500 || PPC_83xx
+	help
+	  This is the Performance Monitor support found on the e500 core
+	  and some e300 cores (c3 and c4).  Select this only if your
+	  core supports the Embedded Performance Monitor APU
+
 config 4xx
 	bool
 	depends on 40x || 44x
@@ -153,13 +159,6 @@ config FSL_BOOKE
 	depends on E200 || E500
 	default y
 
-config FSL_EMB_PERFMON
-	bool "Freescale Embedded Perfmon"
-	depends on E500 || PPC_83xx
-	help
-	  This is the Performance Monitor support found on the e500 core
-	  and some e300 cores (c3 and c4).  Select this only if your
-	  core supports the Embedded Performance Monitor APU
 
 config PTE_64BIT
 	bool
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index a6812ee00100..fdb9f0b0d7a8 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_PPC_MPC52xx)	+= 52xx/
 obj-$(CONFIG_PPC_8xx)		+= 8xx/
 obj-$(CONFIG_PPC_82xx)		+= 82xx/
 obj-$(CONFIG_PPC_83xx)		+= 83xx/
-obj-$(CONFIG_PPC_85xx)		+= 85xx/
+obj-$(CONFIG_FSL_SOC_BOOKE)	+= 85xx/
 obj-$(CONFIG_PPC_86xx)		+= 86xx/
 obj-$(CONFIG_PPC_PSERIES)	+= pseries/
 obj-$(CONFIG_PPC_ISERIES)	+= iseries/
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 9d4b17462f13..5642924fb9fb 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
 obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
+obj-$(CONFIG_FSL_PMC)		+= fsl_pmc.o
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
 obj-$(CONFIG_FSL_GTM)		+= fsl_gtm.o
 obj-$(CONFIG_MPC8xxx_GPIO)	+= mpc8xxx_gpio.o
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index e4b6d66d93de..9de72c96e6d1 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -72,7 +72,7 @@ static phys_addr_t muram_pbase;
 /* Max address size we deal with */
 #define OF_MAX_ADDR_CELLS	4
 
-int __init cpm_muram_init(void)
+int cpm_muram_init(void)
 {
 	struct device_node *np;
 	struct resource r;
@@ -81,6 +81,9 @@ int __init cpm_muram_init(void)
 	int i = 0;
 	int ret = 0;
 
+	if (muram_pbase)
+		return 0;
+
 	spin_lock_init(&cpm_muram_lock);
 	/* initialize the info header */
 	rh_init(&cpm_muram_info, 1,
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index ae88b1448018..4e3a3e345ab3 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -56,7 +56,7 @@ static int __init fsl_pcie_check_link(struct pci_controller *hose)
 	return 0;
 }
 
-#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
+#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
 static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
 	unsigned int index, const struct resource *res,
 	resource_size_t offset)
@@ -392,9 +392,23 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1011E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1011, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header);
-#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header);
+#endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
 
 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header);
diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
new file mode 100644
index 000000000000..a7635a993dca
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -0,0 +1,88 @@
+/*
+ * Suspend/resume support
+ *
+ * Copyright 2009  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/suspend.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/of_platform.h>
+
+struct pmc_regs {
+	__be32 devdisr;
+	__be32 devdisr2;
+	__be32 :32;
+	__be32 :32;
+	__be32 pmcsr;
+#define PMCSR_SLP	(1 << 17)
+};
+
+static struct device *pmc_dev;
+static struct pmc_regs __iomem *pmc_regs;
+
+static int pmc_suspend_enter(suspend_state_t state)
+{
+	int ret;
+
+	setbits32(&pmc_regs->pmcsr, PMCSR_SLP);
+	/* At this point, the CPU is asleep. */
+
+	/* Upon resume, wait for SLP bit to be clear. */
+	ret = spin_event_timeout((in_be32(&pmc_regs->pmcsr) & PMCSR_SLP) == 0,
+				 10000, 10) ? 0 : -ETIMEDOUT;
+	if (ret)
+		dev_err(pmc_dev, "tired waiting for SLP bit to clear\n");
+	return ret;
+}
+
+static int pmc_suspend_valid(suspend_state_t state)
+{
+	if (state != PM_SUSPEND_STANDBY)
+		return 0;
+	return 1;
+}
+
+static struct platform_suspend_ops pmc_suspend_ops = {
+	.valid = pmc_suspend_valid,
+	.enter = pmc_suspend_enter,
+};
+
+static int pmc_probe(struct of_device *ofdev, const struct of_device_id *id)
+{
+	pmc_regs = of_iomap(ofdev->node, 0);
+	if (!pmc_regs)
+		return -ENOMEM;
+
+	pmc_dev = &ofdev->dev;
+	suspend_set_ops(&pmc_suspend_ops);
+	return 0;
+}
+
+static const struct of_device_id pmc_ids[] = {
+	{ .compatible = "fsl,mpc8548-pmc", },
+	{ .compatible = "fsl,mpc8641d-pmc", },
+	{ },
+};
+
+static struct of_platform_driver pmc_driver = {
+	.driver.name = "fsl-pmc",
+	.match_table = pmc_ids,
+	.probe = pmc_probe,
+};
+
+static int __init pmc_init(void)
+{
+	return of_register_platform_driver(&pmc_driver);
+}
+device_initcall(pmc_init);
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index adca4affcf1f..b91f7acdda6f 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -372,7 +372,7 @@ err:
 
 arch_initcall(fsl_usb_of_init);
 
-#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
+#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
 static __be32 __iomem *rstcr;
 
 static int __init setup_rstcr(void)
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 464271bea6c9..149393c02c3f 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -27,6 +27,8 @@
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/crc32.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of_platform.h>
 #include <asm/irq.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -65,19 +67,6 @@ static unsigned int qe_num_of_snum;
 
 static phys_addr_t qebase = -1;
 
-int qe_alive_during_sleep(void)
-{
-	static int ret = -1;
-
-	if (ret != -1)
-		return ret;
-
-	ret = !of_find_compatible_node(NULL, NULL, "fsl,mpc8569-pmc");
-
-	return ret;
-}
-EXPORT_SYMBOL(qe_alive_during_sleep);
-
 phys_addr_t get_qe_base(void)
 {
 	struct device_node *qe;
@@ -104,7 +93,7 @@ phys_addr_t get_qe_base(void)
 
 EXPORT_SYMBOL(get_qe_base);
 
-void __init qe_reset(void)
+void qe_reset(void)
 {
 	if (qe_immr == NULL)
 		qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
@@ -330,16 +319,18 @@ EXPORT_SYMBOL(qe_put_snum);
 static int qe_sdma_init(void)
 {
 	struct sdma __iomem *sdma = &qe_immr->sdma;
-	unsigned long sdma_buf_offset;
+	static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM;
 
 	if (!sdma)
 		return -ENODEV;
 
 	/* allocate 2 internal temporary buffers (512 bytes size each) for
 	 * the SDMA */
- 	sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
-	if (IS_ERR_VALUE(sdma_buf_offset))
-		return -ENOMEM;
+	if (IS_ERR_VALUE(sdma_buf_offset)) {
+		sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
+		if (IS_ERR_VALUE(sdma_buf_offset))
+			return -ENOMEM;
+	}
 
 	out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
  	out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
@@ -349,7 +340,7 @@ static int qe_sdma_init(void)
 }
 
 /* The maximum number of RISCs we support */
-#define MAX_QE_RISC     2
+#define MAX_QE_RISC     4
 
 /* Firmware information stored here for qe_get_firmware_info() */
 static struct qe_firmware_info qe_firmware_info;
@@ -658,3 +649,35 @@ unsigned int qe_get_num_of_snums(void)
 	return num_of_snums;
 }
 EXPORT_SYMBOL(qe_get_num_of_snums);
+
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx)
+static int qe_resume(struct of_device *ofdev)
+{
+	if (!qe_alive_during_sleep())
+		qe_reset();
+	return 0;
+}
+
+static int qe_probe(struct of_device *ofdev, const struct of_device_id *id)
+{
+	return 0;
+}
+
+static const struct of_device_id qe_ids[] = {
+	{ .compatible = "fsl,qe", },
+	{ },
+};
+
+static struct of_platform_driver qe_driver = {
+	.driver.name = "fsl-qe",
+	.match_table = qe_ids,
+	.probe = qe_probe,
+	.resume = qe_resume,
+};
+
+static int __init qe_drv_init(void)
+{
+	return of_register_platform_driver(&qe_driver);
+}
+device_initcall(qe_drv_init);
+#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */