Merge remote branch 'avr32/avr32-arch'

5 files changed, 23 insertions, 21 deletions

diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c
index bf78e516a85f..7919be311f4a 100644
--- a/arch/avr32/boards/atngw100/mrmt.c
+++ b/arch/avr32/boards/atngw100/mrmt.c
@@ -302,6 +302,7 @@ static int __init mrmt1_init(void)
 	at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
 			GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
 	set_irq_type( AT32_EXTINT(TS_IRQ), IRQ_TYPE_EDGE_FALLING );
+	at32_spi_setup_slaves(0,spi01_board_info,ARRAY_SIZE(spi01_board_info));
 	spi_register_board_info(spi01_board_info,ARRAY_SIZE(spi01_board_info));
 #endif
 
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index bc299fbbeb4e..5b022aad4bd9 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -56,13 +56,8 @@ static struct spi_board_info spi0_board_info[] __initdata = {
 static struct mci_platform_data __initdata mci0_data = {
 	.slot[0] = {
 		.bus_width	= 4,
-#if defined(CONFIG_BOARD_ATNGW100_EVKLCD10X) || defined(CONFIG_BOARD_ATNGW100_MRMT1)
-		.detect_pin     = GPIO_PIN_NONE,
-		.wp_pin         = GPIO_PIN_NONE,
-#else
 		.detect_pin	= GPIO_PIN_PC(25),
 		.wp_pin		= GPIO_PIN_PE(0),
-#endif
 	},
 };
 
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index eb9d4dc2e86d..a47592e2fc32 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1181,19 +1181,32 @@ static struct resource atmel_spi1_resource[] = {
 DEFINE_DEV(atmel_spi, 1);
 DEV_CLK(spi_clk, atmel_spi1, pba, 1);
 
-static void __init
-at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
-		      unsigned int n, const u8 *pins)
+void __init
+at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, unsigned int n)
 {
+	/*
+	 * Manage the chipselects as GPIOs, normally using the same pins
+	 * the SPI controller expects; but boards can use other pins.
+	 */
+	static u8 __initdata spi_pins[][4] = {
+		{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
+		  GPIO_PIN_PA(5), GPIO_PIN_PA(20) },
+		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
+		  GPIO_PIN_PB(4), GPIO_PIN_PA(27) },
+	};
 	unsigned int pin, mode;
 
+	/* There are only 2 SPI controllers */
+	if (bus_num > 1)
+		return;
+
 	for (; n; n--, b++) {
 		b->bus_num = bus_num;
 		if (b->chip_select >= 4)
 			continue;
 		pin = (unsigned)b->controller_data;
 		if (!pin) {
-			pin = pins[b->chip_select];
+			pin = spi_pins[bus_num][b->chip_select];
 			b->controller_data = (void *)pin;
 		}
 		mode = AT32_GPIOF_OUTPUT;
@@ -1206,16 +1219,6 @@ at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b,
 struct platform_device *__init
 at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
 {
-	/*
-	 * Manage the chipselects as GPIOs, normally using the same pins
-	 * the SPI controller expects; but boards can use other pins.
-	 */
-	static u8 __initdata spi0_pins[] =
-		{ GPIO_PIN_PA(3), GPIO_PIN_PA(4),
-		  GPIO_PIN_PA(5), GPIO_PIN_PA(20), };
-	static u8 __initdata spi1_pins[] =
-		{ GPIO_PIN_PB(2), GPIO_PIN_PB(3),
-		  GPIO_PIN_PB(4), GPIO_PIN_PA(27), };
 	struct platform_device *pdev;
 	u32 pin_mask;
 
@@ -1228,7 +1231,7 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
 		select_peripheral(PIOA, (1 << 0), PERIPH_A, AT32_GPIOF_PULLUP);
 		select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
 
-		at32_spi_setup_slaves(0, b, n, spi0_pins);
+		at32_spi_setup_slaves(0, b, n);
 		break;
 
 	case 1:
@@ -1239,7 +1242,7 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n)
 		select_peripheral(PIOB, (1 << 0), PERIPH_B, AT32_GPIOF_PULLUP);
 		select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
 
-		at32_spi_setup_slaves(1, b, n, spi1_pins);
+		at32_spi_setup_slaves(1, b, n);
 		break;
 
 	default:
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index ddedb471f33e..c7f25bb1d068 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -49,6 +49,7 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
 struct spi_board_info;
 struct platform_device *
 at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
+void at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, unsigned int n);
 
 struct atmel_lcdfb_info;
 struct platform_device *
diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h
index 44d0bfa1f409..c253e9bb5616 100644
--- a/arch/avr32/mach-at32ap/include/mach/cpu.h
+++ b/arch/avr32/mach-at32ap/include/mach/cpu.h
@@ -31,5 +31,7 @@
 #define cpu_is_at91sam9263()	(0)
 #define cpu_is_at91sam9rl()	(0)
 #define cpu_is_at91cap9()	(0)
+#define cpu_is_at91sam9g10()	(0)
+#define cpu_is_at91sam9g45()	(0)
 
 #endif /* __ASM_ARCH_CPU_H */