Merge tag 'imx-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.1:

- Fix imx93-pd driver to release resources when error occurs in probe.
- A series from Ioana Ciornei to add missing clock frequencies for MDIO
  controllers on LayerScape SoCs, so that the kernel driver can work
  independently from bootloader.
- A series from Li Jun to fix USB power domain setup in i.MX8MM/N device
  trees.
- Fix CPLD_Dn pull configuration for MX8Menlo board to avoid interfering
  with CPLD power off functionality.
- Fix ctrl_sleep_moci GPIO setup for verdin-imx8mp board.
- Fix DT schema check warnings on uSDHC clocks for imx8-ss-conn device
  tree.
- Fix up gpcv2 DT bindings to have an optional `power-domains` property.
- A couple of i.MX93 device tree fixes on S4MU interrupt and gpio-ranges
  of GPIO controllers.
- Keep PU regulator on for Quad and QuadPlus based imx6dl-yapp4 boards to
  work around a hardware design flaw in supply voltage distribution.
- Fix user push-button GPIO offset on imx6qdl-gw59 boards.

* tag 'imx-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
  arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
  arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
  soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
  arm64: dts: imx93: correct gpio-ranges
  arm64: dts: imx93: correct s4mu interrupt names
  dt-bindings: power: gpcv2: add power-domains property
  arm64: dts: imx8: correct clock order
  ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
  ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
  arm64: dts: imx8mn: Correct the usb power domain
  arm64: dts: imx8mn: remove otg1 power domain dependency on hsio
  arm64: dts: imx8mm: correct usb power domains
  arm64: dts: imx8mm: remove otg1/2 power domain dependency on hsio
  arm64: dts: verdin-imx8mp: fix ctrl_sleep_moci
  arm64: dts: imx8mm: Enable CPLD_Dn pull down resistor on MX8Menlo

Link: https://lore.kernel.org/r/20221101031547.GB125525@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

13 files changed, 67 insertions, 40 deletions

diff --git a/arch/arm/boot/dts/imx6q-yapp4-crux.dts b/arch/arm/boot/dts/imx6q-yapp4-crux.dts
index 15f4824a5142..bddf3822ebf7 100644
--- a/arch/arm/boot/dts/imx6q-yapp4-crux.dts
+++ b/arch/arm/boot/dts/imx6q-yapp4-crux.dts
@@ -33,6 +33,10 @@
 	status = "okay";
 };
 
+&reg_pu {
+	regulator-always-on;
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 68e5ab2e27e2..6bb4855d13ce 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -29,7 +29,7 @@
 
 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 8e23cec7149e..696427b487f0 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -26,7 +26,7 @@
 
 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
diff --git a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
index cea165f2161a..afaf4a6759d4 100644
--- a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
+++ b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts
@@ -33,6 +33,10 @@
 	status = "okay";
 };
 
+&reg_pu {
+	regulator-always-on;
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 421d879013d7..260d045dbd9a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -779,6 +779,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 
@@ -788,6 +791,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index f1b9cc8714dc..348d9e3a9125 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -532,6 +532,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -541,6 +544,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 6680fb2a6dc9..8c76d86cb756 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1385,6 +1385,9 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			little-endian;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -1395,6 +1398,9 @@
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index 82a1c4488378..10370d1a6c6d 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -38,9 +38,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
 	};
@@ -49,9 +49,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
 		fsl,tuning-step = <2>;
@@ -62,9 +62,9 @@ conn_subsys: bus@5b000000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
index 32f6f2f50c10..43e89859c044 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
@@ -250,21 +250,21 @@
 		/* SODIMM 96 */
 		MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4			0x1c4
 		/* CPLD_D[7] */
-		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x1c4
+		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x184
 		/* CPLD_D[6] */
-		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x1c4
+		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x184
 		/* CPLD_D[5] */
-		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x1c4
+		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x184
 		/* CPLD_D[4] */
-		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x184
 		/* CPLD_D[3] */
-		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x184
 		/* CPLD_D[2] */
-		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x184
 		/* CPLD_D[1] */
-		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x184
 		/* CPLD_D[0] */
-		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x184
 		/* KBD_intK */
 		MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27			0x1c4
 		/* DISP_reset */
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index afb90f59c83c..dabd94dc30c4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -276,6 +276,7 @@
 		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
 	};
 
 	usbphynop2: usbphynop2 {
@@ -285,6 +286,7 @@
 		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg2>;
 	};
 
 	soc: soc@0 {
@@ -674,13 +676,11 @@
 					pgc_otg1: power-domain@2 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_otg2: power-domain@3 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_gpumix: power-domain@4 {
@@ -1186,7 +1186,7 @@
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
-				power-domains = <&pgc_otg1>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
@@ -1206,7 +1206,7 @@
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop2>;
 				fsl,usbmisc = <&usbmisc2 0>;
-				power-domains = <&pgc_otg2>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index cb2836bfbd95..ad0b99adf691 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -662,7 +662,6 @@
 					pgc_otg1: power-domain@1 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MN_POWER_DOMAIN_OTG1>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_gpumix: power-domain@2 {
@@ -1076,7 +1075,7 @@
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
-				power-domains = <&pgc_otg1>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
@@ -1175,5 +1174,6 @@
 		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index 7b712d1888ea..5dcd1de586b5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -354,16 +354,6 @@
 			  "SODIMM_82",
 			  "SODIMM_70",
 			  "SODIMM_72";
-
-	ctrl-sleep-moci-hog {
-		gpio-hog;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpios = <29 GPIO_ACTIVE_HIGH>;
-		line-name = "CTRL_SLEEP_MOCI#";
-		output-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
-	};
 };
 
 &gpio3 {
@@ -432,6 +422,16 @@
 			  "SODIMM_256",
 			  "SODIMM_48",
 			  "SODIMM_44";
+
+	ctrl-sleep-moci-hog {
+		gpio-hog;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		line-name = "CTRL_SLEEP_MOCI#";
+		output-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+	};
 };
 
 /* On-module I2C */
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 3a5713bb4880..0247866fc86b 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -451,7 +451,7 @@
 			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
 				 <&clk IMX93_CLK_GPIO2_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 32 32>;
+			gpio-ranges = <&iomuxc 0 4 30>;
 		};
 
 		gpio3: gpio@43820080 {
@@ -465,7 +465,8 @@
 			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
 				 <&clk IMX93_CLK_GPIO3_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 64 32>;
+			gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
+				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
 		};
 
 		gpio4: gpio@43830080 {
@@ -479,7 +480,7 @@
 			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
 				 <&clk IMX93_CLK_GPIO4_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 96 32>;
+			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
 		};
 
 		gpio1: gpio@47400080 {
@@ -493,7 +494,7 @@
 			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
 				 <&clk IMX93_CLK_GPIO1_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 0 32>;
+			gpio-ranges = <&iomuxc 0 92 16>;
 		};
 
 		s4muap: mailbox@47520000 {
@@ -501,7 +502,7 @@
 			reg = <0x47520000 0x10000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "txirq", "rxirq";
+			interrupt-names = "tx", "rx";
 			#mbox-cells = <2>;
 		};