Merge remote-tracking branch 'imx-mxs/for-next'

48 files changed, 1161 insertions, 233 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1b51cce4f0d..e345e7225001 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -374,6 +374,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-aristainetos2_7.dtb \
 	imx6dl-colibri-eval-v3.dtb \
 	imx6dl-cubox-i.dtb \
+	imx6dl-cubox-i-emmc-som-v15.dtb \
+	imx6dl-cubox-i-som-v15.dtb \
 	imx6dl-dfi-fs700-m60.dtb \
 	imx6dl-gw51xx.dtb \
 	imx6dl-gw52xx.dtb \
@@ -386,6 +388,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-gw5903.dtb \
 	imx6dl-gw5904.dtb \
 	imx6dl-hummingboard.dtb \
+	imx6dl-hummingboard-emmc-som-v15.dtb \
+	imx6dl-hummingboard-som-v15.dtb \
 	imx6dl-icore.dtb \
 	imx6dl-icore-rqs.dtb \
 	imx6dl-nit6xlite.dtb \
@@ -423,6 +427,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-b850v3.dtb \
 	imx6q-cm-fx6.dtb \
 	imx6q-cubox-i.dtb \
+	imx6q-cubox-i-emmc-som-v15.dtb \
+	imx6q-cubox-i-som-v15.dtb \
 	imx6q-dfi-fs700-m60.dtb \
 	imx6q-display5-tianma-tm070-1280x768.dtb \
 	imx6q-dmo-edmqmx6.dtb \
@@ -441,6 +447,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-gw5904.dtb \
 	imx6q-h100.dtb \
 	imx6q-hummingboard.dtb \
+	imx6q-hummingboard-emmc-som-v15.dtb \
+	imx6q-hummingboard-som-v15.dtb \
 	imx6q-icore.dtb \
 	imx6q-icore-ofcap10.dtb \
 	imx6q-icore-ofcap12.dtb \
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 09ce8b81fafa..c43cf704b768 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -628,11 +628,13 @@
 		usbphy0: usb-phy@0 {
 			reg = <0>;
 			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
 		};
 
 		usbphy1: usb-phy@1 {
 			reg = <1>;
 			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index 96f442ba6d22..2a140c8ae6d2 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -30,6 +30,7 @@
 			reg = <0>;
 			clocks = <&clks IMX27_CLK_DUMMY>;
 			clock-names = "main_clk";
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index 2a9198f99a8d..2ed2d73b087e 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -63,6 +63,7 @@
 			vcc-supply = <&reg_5v0>;
 			clocks = <&clks IMX27_CLK_DUMMY>;
 			clock-names = "main_clk";
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
index c973c5d91875..c9095b7654c6 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -53,6 +53,7 @@
 			vcc-supply = <&sw3_reg>;
 			clocks = <&clks IMX27_CLK_DUMMY>;
 			clock-names = "main_clk";
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 6d5e6a60bee7..f049c692c6b0 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -402,11 +402,13 @@
 		usbphy0: usb-phy@0 {
 			reg = <0>;
 			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
 		};
 
 		usbphy1: usb-phy@1 {
 			reg = <1>;
 			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 2a694c5cc8ae..c4aa53c9c413 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -165,6 +165,7 @@
 			clocks = <&clks IMX5_CLK_DUMMY>;
 			clock-names = "main_clk";
 			reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
index 1305b05c7ed9..b3d952f37cdc 100644
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -94,6 +94,7 @@
 			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
 			clock-names = "main_clk";
 			clock-frequency = <19200000>;
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index 49be0e1c812d..f9fdb7cf06ce 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -242,7 +242,7 @@
 
 	sound {
 		compatible = "simple-audio-card";
-		simple-audio-card,name = "RDU1 audio";
+		simple-audio-card,name = "Front";
 		simple-audio-card,format = "i2s";
 		simple-audio-card,bitclock-master = <&sound_codec>;
 		simple-audio-card,frame-master = <&sound_codec>;
@@ -251,7 +251,7 @@
 		simple-audio-card,routing =
 			"Headphone Jack", "HPLEFT",
 			"Headphone Jack", "HPRIGHT";
-		simple-audio-card,aux-devs = <&tpa6130a2>;
+		simple-audio-card,aux-devs = <&hpa1>;
 
 		sound_cpu: simple-audio-card,cpu {
 			sound-dai = <&ssi2>;
@@ -479,7 +479,7 @@
 		reg = <0x50>;
 	};
 
-	tpa6130a2: amp@60 {
+	hpa1: amp@60 {
 		compatible = "ti,tpa6130a2";
 		reg = <0x60>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 378be720b3c7..00d30bd70068 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -113,6 +113,7 @@
 			reg = <0>;
 			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
 			clock-names = "main_clk";
+			#phy-cells = <0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts
index 4f54fd4418a3..5e67e43004e7 100644
--- a/arch/arm/boot/dts/imx53-cx9020.dts
+++ b/arch/arm/boot/dts/imx53-cx9020.dts
@@ -152,7 +152,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 71b58b6933e1..a22e461fc168 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -225,10 +225,16 @@
 	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
 	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		interrupt-parent = <&gpio2>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-		device_type = "ethernet-phy";
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+			device_type = "ethernet-phy";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 84f17f7abb71..fb6cdd629ee7 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -303,6 +303,7 @@
 				compatible = "usb-nop-xceiv";
 				clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
 				clock-names = "main_clk";
+				#phy-cells = <0>;
 				status = "okay";
 			};
 
@@ -310,6 +311,7 @@
 				compatible = "usb-nop-xceiv";
 				clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
 				clock-names = "main_clk";
+				#phy-cells = <0>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts
new file mode 100644
index 000000000000..2b2fc360b865
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts b/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts
new file mode 100644
index 000000000000..e09c565d1d1f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Solo/DualLite (1.5som)";
+	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts
index f10a36b8647d..2b1b3e193f53 100644
--- a/arch/arm/boot/dts/imx6dl-cubox-i.dts
+++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts
@@ -41,6 +41,8 @@
 /dts-v1/;
 
 #include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
 #include "imx6qdl-cubox-i.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts
new file mode 100644
index 000000000000..a63f742f20d9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts
new file mode 100644
index 000000000000..66a06cf3cdf3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Solo/DualLite (1.5som)";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index 39c2602fa87c..cbd02eb486e1 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -42,6 +42,8 @@
 /dts-v1/;
 
 #include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
 #include "imx6qdl-hummingboard.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts
new file mode 100644
index 000000000000..3e59ebbb3608
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts b/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts
new file mode 100644
index 000000000000..dab70d1230a2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Dual/Quad (1.5som)";
+	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts
index b68aa0e57f20..1c7b262e3709 100644
--- a/arch/arm/boot/dts/imx6q-cubox-i.dts
+++ b/arch/arm/boot/dts/imx6q-cubox-i.dts
@@ -41,6 +41,8 @@
 /dts-v1/;
 
 #include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
 #include "imx6qdl-cubox-i.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
index a3269f57df2b..743c11f1ad4e 100644
--- a/arch/arm/boot/dts/imx6q-h100.dts
+++ b/arch/arm/boot/dts/imx6q-h100.dts
@@ -42,8 +42,8 @@
 /dts-v1/;
 
 #include "imx6q.dtsi"
-#include "imx6qdl-microsom.dtsi"
-#include "imx6qdl-microsom-ar8035.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
 
 / {
 	model = "Auvidea H100";
diff --git a/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts
new file mode 100644
index 000000000000..c51b4e4fd71e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,receive-eq-mdB = <3000>;
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts
new file mode 100644
index 000000000000..e4132d62ffa2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad (1.5som)";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,receive-eq-mdB = <3000>;
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts
index 69a7a0a1cb21..8c9e94e648a7 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6q-hummingboard.dts
@@ -42,6 +42,8 @@
 /dts-v1/;
 
 #include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
 #include "imx6qdl-hummingboard.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 14fff4ee6516..d1cfdc264126 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -38,8 +38,6 @@
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
-#include "imx6qdl-microsom.dtsi"
-#include "imx6qdl-microsom-ar8035.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -64,38 +62,36 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
 
-		reg_usbh1_vbus: usb-h1-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio1 0 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	v_usb2: regulator-v-usb2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
 
-		reg_usbotg_vbus: usb-otg-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio3 22 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
 	};
 
 	sound-spdif {
@@ -139,7 +135,7 @@
 
 	status = "okay";
 
-	rtc: pcf8523@68 {
+	rtc@68 {
 		compatible = "nxp,pcf8523";
 		reg = <0x68>;
 	};
@@ -243,21 +239,25 @@
 &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
-	vbus-supply = <&reg_usbh1_vbus>;
+	vbus-supply = <&v_usb2>;
 	status = "okay";
 };
 
 &usbotg {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
-	vbus-supply = <&reg_usbotg_vbus>;
+	vbus-supply = <&v_usb1>;
 	status = "okay";
 };
 
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
-	vmmc-supply = <&reg_3p3v>;
+	vmmc-supply = <&vcc_3v3>;
 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
+
+&vcc_3v3 {
+	vin-supply = <&v_5v0>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 37c07c0748aa..92583238ca4a 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -38,8 +38,6 @@
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
-#include "imx6qdl-microsom.dtsi"
-#include "imx6qdl-microsom-ar8035.dtsi"
 
 / {
 	chosen {
@@ -53,38 +51,58 @@
 		pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
+	v_3v2: regulator-v-3v2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_3v2";
+		vin-supply = <&v_5v0>;
+	};
 
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
 
-		reg_usbh1_vbus: usb-h1-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	v_sd: regulator-v-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_vmmc>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_sd";
+		startup-delay-us = <1000>;
+		vin-supply = <&v_3v2>;
+	};
 
-		reg_usbotg_vbus: usb-otg-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	v_usb2: regulator-v-usb2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
 	};
 
 	sound-sgtl5000 {
@@ -132,20 +150,20 @@
 	status = "okay";
 
 	/* Pro baseboard model */
-	rtc: pcf8523@68 {
+	rtc@68 {
 		compatible = "nxp,pcf8523";
 		reg = <0x68>;
 	};
 
 	/* Pro baseboard model */
-	sgtl5000: sgtl5000@a {
+	sgtl5000: codec@a {
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		compatible = "fsl,sgtl5000";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
 		reg = <0x0a>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
+		VDDA-supply = <&v_3v2>;
+		VDDIO-supply = <&v_3v2>;
 	};
 };
 
@@ -247,6 +265,11 @@
 				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
 			>;
 		};
+		pinctrl_hummingboard_vmmc: hummingboard-vmmc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+			>;
+		};
 	};
 };
 
@@ -280,7 +303,7 @@
 
 &usbh1 {
 	disable-over-current;
-	vbus-supply = <&reg_usbh1_vbus>;
+	vbus-supply = <&v_usb2>;
 	status = "okay";
 };
 
@@ -288,7 +311,7 @@
 	disable-over-current;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
-	vbus-supply = <&reg_usbotg_vbus>;
+	vbus-supply = <&v_usb1>;
 	status = "okay";
 };
 
@@ -298,7 +321,11 @@
 		&pinctrl_hummingboard_usdhc2_aux
 		&pinctrl_hummingboard_usdhc2
 	>;
-	vmmc-supply = <&reg_3p3v>;
+	vmmc-supply = <&v_sd>;
 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
+
+&vcc_3v3 {
+	vin-supply = <&v_3v2>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 4bdf29169d2a..919b6b7619a4 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -276,6 +276,23 @@
 		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x2000>;
+		};
+
+		partition@c2000 {
+			label = "splash";
+			reg = <0xc2000 0x13e000>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 4fa2fac3877b..82d6ccb46982 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -235,6 +235,9 @@
 };
 
 &hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
 	status = "okay";
 };
 
@@ -453,6 +456,12 @@
 			>;
 		};
 
+		pinctrl_hdmi_cec: hdmicecgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
 		pinctrl_i2c2: i2c2grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi
index 6a410160c9ee..b55af61dfeca 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi
@@ -40,7 +40,7 @@
  */
 #include <dt-bindings/gpio/gpio.h>
 / {
-	clk_sdio: sdio-clock {
+	clk_brcm: brcm-clock {
 		compatible = "gpio-gate-clock";
 		#clock-cells = <0>;
 		pinctrl-names = "default";
@@ -48,27 +48,23 @@
 		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-
-		reg_brcm: brcm-reg {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio3 19 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
-			regulator-name = "brcm_reg";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			startup-delay-us = <200000>;
-		};
+	reg_brcm: brcm-reg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 19 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
 	};
 
 	usdhc1_pwrseq: usdhc1_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
 			      <&gpio6 0 GPIO_ACTIVE_LOW>;
-		clocks = <&clk_sdio>;
+		clocks = <&clk_brcm>;
 		clock-names = "ext_clock";
 	};
 };
@@ -104,13 +100,6 @@
 			>;
 		};
 
-		pinctrl_microsom_uart1: microsom-uart1 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
 		pinctrl_microsom_uart4: microsom-uart4 {
 			fsl,pins = <
 				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
@@ -133,12 +122,6 @@
 	};
 };
 
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_uart1>;
-	status = "okay";
-};
-
 /* UART4 - Connected to optional BRCM Wifi/BT/FM */
 &uart4 {
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi
new file mode 100644
index 000000000000..5f3b8baab20f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_usdhc3: microsom-usdhc3 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+			>;
+		};
+	};
+};
+
+/* USDHC3 - eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
new file mode 100644
index 000000000000..44a97ba93a95
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	nvcc_sd1: regulator-nvcc-sd1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "nvcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	clk_ti_wifi: ti-wifi-clock {
+		/* This is a hack around the kernel - using "fixed clock"
+		 * results in the "pinctrl" properties being ignored, and
+		 * the clock not being output.  Instead, use a gated clock
+		 * and the unrouted WL_XTAL_PU gpio.
+		 */
+		compatible = "gpio-gate-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_clk>;
+		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	pwrseq_ti_wifi: ti-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_wifi_en>;
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+		clocks = <&clk_ti_wifi>;
+		clock-names = "ext_clock";
+	};
+};
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_ti_bt: microsom-ti-bt {
+			fsl,pins = <
+				/* BT_EN_SOC */
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_clk: microsom-ti-clk {
+			fsl,pins = <
+				/* EXT_32K */
+				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+				/* WL_XTAL_PU (unrouted) */
+				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-en {
+			fsl,pins = <
+				/* WLAN_EN_SOC */
+				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irq {
+			fsl,pins = <
+				/* WLAN_IRQ */
+				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_uart4: microsom-uart4 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_microsom_usdhc1: microsom-usdhc1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			>;
+		};
+	};
+};
+
+/* UART4 - Connected to optional TI Wi-Fi/BT/FM */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		clocks = <&clk_ti_wifi>;
+		clock-names = "ext_clock";
+		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_bt>;
+	};
+};
+
+/* USDHC1 - Connected to optional TI Wi-Fi/BT/FM */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_usdhc1>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&pwrseq_ti_wifi>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	/* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupts-extended = <&gpio6 4 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_wifi_irq>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index 900e8c781f91..4ccb7afc4b35 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -1,9 +1,6 @@
 /*
  * Copyright (C) 2013,2014 Russell King
  *
- * This describes the hookup for an AR8035 to the iMX6 on the SolidRun
- * MicroSOM.
- *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
@@ -41,6 +38,18 @@
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "vcc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
@@ -51,7 +60,7 @@
 };
 
 &iomuxc {
-	enet {
+	microsom {
 		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
@@ -59,10 +68,10 @@
 				/* AR8035 reset */
 				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
 				/* AR8035 interrupt */
-				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x80000000
+				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
 				/* GPIO16 -> AR8035 25MHz */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0xc0000000
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x80000000
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x13030
 				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
 				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
 				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
@@ -95,5 +104,18 @@
 				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
 			>;
 		};
+
+		pinctrl_microsom_uart1: microsom-uart1 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
 	};
 };
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_uart1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index c96c91d83678..4161b7d4323a 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -28,6 +28,13 @@
 		status = "disabled";
 	};
 
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio2 4 0>;
+		pinctrl-0 = <&pinctrl_power_off>;
+		pinctrl-names = "default";
+	};
+
 	memory {
 		reg = <0x10000000 0x40000000>;
 	};
@@ -172,6 +179,12 @@
 			>;
 		};
 
+		pinctrl_power_off: poweroffgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x30
+			>;
+		};
+
 		pinctrl_touchscreenp7: touchscreenp7grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15		0x70
@@ -208,8 +221,8 @@
 			fsl,pins = <
 				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
 				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x1b0b0
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
 				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
 			>;
 		};
@@ -218,8 +231,8 @@
 			fsl,pins = <
 				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
 				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x1b0b0
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
 				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
 			>;
 		};
@@ -228,8 +241,8 @@
 			fsl,pins = <
 				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
 				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
-				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x1b0b0
-				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x13080
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x13080
 				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
 			>;
 		};
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
index 6d8d9ca96646..3a8a4952d45e 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi
@@ -21,6 +21,11 @@
 	};
 };
 
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
 &i2c3 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 7812fbac963c..5ea99490bfcc 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -49,6 +49,7 @@
 
 	aliases {
 		mdio-gpio0 = &mdio1;
+		rtc0 = &ds1341;
 	};
 
 	mdio1: mdio {
@@ -501,7 +502,7 @@
 		reg = <0x54>;
 	};
 
-	rtc@68 {
+	ds1341: rtc@68 {
 		compatible = "dallas,ds1341";
 		reg = <0x68>;
 	};
@@ -580,6 +581,18 @@
 	pinctrl-0 = <&pinctrl_pcie>;
 	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	host@0 {
+		reg = <0 0 0 0 0>;
+		device_type = "pci";
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		i210: i210@0 {
+			reg = <0 0 0 0 0>;
+		};
+	};
 };
 
 &usdhc2 {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 1ce4eabf0590..ac4f9ecf80cc 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -1017,6 +1017,7 @@
 			fec: ethernet@2188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
+				interrupt-names = "int0", "pps";
 				interrupts-extended =
 					<&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
 					<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index da815527a7f8..d57a41c9c4b3 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -49,86 +49,84 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	vcc_sd3: regulator-vcc-sd3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_sd3>;
+		regulator-name = "VCC_SD3";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vcc_sd3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_vcc_sd3>;
-			regulator-name = "VCC_SD3";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_usb_otg1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_otg1>;
-			regulator-name = "usb_otg1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_usb_otg2_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb_otg2>;
-			regulator-name = "usb_otg2_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_psu_5v: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "PSU-5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		reg_lcd_3v3: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "lcd-3v3";
-			gpio = <&gpio3 27 0>;
-			enable-active-high;
-		};
-
-		reg_peri_3v3: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_peri_3v3>;
-			regulator-name = "peri_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-always-on;
-		};
-
-		reg_enet_3v3: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_enet_3v3>;
-			regulator-name = "enet_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-		};
+	reg_psu_5v: regulator-psu-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "PSU-5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio3 27 0>;
+		enable-active-high;
+	};
+
+	reg_peri_3v3: regulator-peri-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_peri_3v3>;
+		regulator-name = "peri_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_enet_3v3: regulator-enet-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enet_3v3>;
+		regulator-name = "enet_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_pcie_gpio: regulator-pcie-gpio {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	sound {
@@ -212,6 +210,14 @@
 	};
 };
 
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_gpio>;
+	status = "okay";
+};
+
 &lcdif1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcd>;
@@ -453,6 +459,18 @@
 			>;
 		};
 
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
+			>;
+		};
+
+		pinctrl_pcie_reg: pciereggrp {
+			fsl,pins = <
+				MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0x10b0
+			>;
+		};
+
 		pinctrl_peri_3v3: peri3v3grp {
 			fsl,pins = <
 				MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 5b03ba3beda9..40c6738c3213 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -862,6 +862,7 @@
 			fec1: ethernet@2188000 {
 				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
+				interrupt-names = "int0", "pps";
 				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_ENET>,
@@ -971,6 +972,7 @@
 			fec2: ethernet@21b4000 {
 				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
 				reg = <0x021b4000 0x4000>;
+				interrupt-names = "int0", "pps";
 				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_ENET>,
@@ -1304,25 +1306,28 @@
 
 		pcie: pcie@8ffc000 {
 			compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
-			reg = <0x08ffc000 0x4000>; /* DBI */
+			reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
+			reg-names = "dbi", "config";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-				  /* configuration space */
-			ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000
-				  /* downstream I/O */
-				  0x81000000 0 0          0x08f80000 0 0x00010000
-				  /* non-prefetchable memory */
-				  0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
 			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0          0x08f80000 0 0x00010000 /* downstream I/O */
+				  0x82000000 0 0x01000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
-				 <&clks IMX6SX_CLK_PCIE_AXI>,
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SX_CLK_PCIE_AXI>,
 				 <&clks IMX6SX_CLK_LVDS1_OUT>,
+				 <&clks IMX6SX_CLK_PCIE_REF_125M>,
 				 <&clks IMX6SX_CLK_DISPLAY_AXI>;
-			clock-names = "pcie_ref_125m", "pcie_axi",
-				      "lvds_gate", "display_axi";
+			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_inbound_axi";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index d5181f85ca9c..e0b4a464c7ed 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -476,6 +476,7 @@
 			fec2: ethernet@20b4000 {
 				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
 				reg = <0x020b4000 0x4000>;
+				interrupt-names = "int0", "pps";
 				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_ENET>,
@@ -784,6 +785,7 @@
 			fec1: ethernet@2188000 {
 				compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
+				interrupt-names = "int0", "pps";
 				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6UL_CLK_ENET>,
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 4d308d17f040..78782579c5fd 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -109,14 +109,17 @@
 		compatible = "usb-nop-xceiv";
 		clocks = <&clks IMX7D_USB_PHY2_CLK>;
 		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 
 	fec2: ethernet@30bf0000 {
 		compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
 		reg = <0x30bf0000 0x10000>;
-		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+		interrupt-names = "int0", "int1", "int2", "pps";
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
 			<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
 			<&clks IMX7D_ENET_AXI_ROOT_CLK>,
 			<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 82ad26e766eb..e718fd28ceeb 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -949,12 +949,14 @@
 				compatible = "usb-nop-xceiv";
 				clocks = <&clks IMX7D_USB_PHY1_CLK>;
 				clock-names = "main_clk";
+				#phy-cells = <0>;
 			};
 
 			usbphynop3: usbphynop3 {
 				compatible = "usb-nop-xceiv";
 				clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
 				clock-names = "main_clk";
+				#phy-cells = <0>;
 			};
 
 			usdhc1: usdhc@30b40000 {
@@ -1007,9 +1009,11 @@
 			fec1: ethernet@30be0000 {
 				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
 				reg = <0x30be0000 0x10000>;
-				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				interrupt-names = "int0", "int1", "int2", "pps";
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+					<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
 					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
 					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index a8b148ad1dd2..f7946f40d35d 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -228,6 +228,10 @@
 	};
 };
 
+&esdhc {
+        status = "okay";
+};
+
 &sai1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 9319e1f0f1d8..64249726b3cb 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -154,8 +154,22 @@
 			big-endian;
 		};
 
+		qspi: quadspi@1550000 {
+			compatible = "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+			      <0x0 0x40000000 0x0 0x40000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			status = "disabled";
+		};
+
 		esdhc: esdhc@1560000 {
-			compatible = "fsl,esdhc";
+			compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 4b8edc8982cf..c6f134c78303 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -73,7 +73,7 @@
 				#size-cells = <0>;
 				reg = <0>;
 				dsa,member = <0 0>;
-				eeprom-length = <512>;
+				eeprom-length = <65536>;
 				interrupt-parent = <&gpio0>;
 				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
 				interrupt-controller;
@@ -170,7 +170,7 @@
 				#size-cells = <0>;
 				reg = <0>;
 				dsa,member = <0 1>;
-				eeprom-length = <512>;
+				eeprom-length = <65536>;
 				interrupt-parent = <&gpio0>;
 				interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
 				interrupt-controller;
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index 78262899a590..5fb1d2254b5e 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -547,7 +547,6 @@ static int imx_mmdc_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	void __iomem *mmdc_base, *reg;
 	u32 val;
-	int timeout = 0x400;
 
 	mmdc_base = of_iomap(np, 0);
 	WARN_ON(!mmdc_base);
@@ -565,16 +564,6 @@ static int imx_mmdc_probe(struct platform_device *pdev)
 	val &= ~(1 << BP_MMDC_MAPSR_PSD);
 	writel_relaxed(val, reg);
 
-	/* Ensure it's successfully enabled */
-	while (!(readl_relaxed(reg) & 1 << BP_MMDC_MAPSR_PSS) && --timeout)
-		cpu_relax();
-
-	if (unlikely(!timeout)) {
-		pr_warn("%s: failed to enable automatic power saving\n",
-			__func__);
-		return -EBUSY;
-	}
-
 	return imx_mmdc_perf_init(pdev, mmdc_base);
 }
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index bd80e9a2e67c..f5f29a2b7d14 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -166,6 +166,77 @@
 			     <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
 	};
 
+	fsl_mc: fsl-mc@80c000000 {
+		compatible = "fsl,qoriq-mc";
+		reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+		msi-parent = <&its>;
+		#address-cells = <3>;
+		#size-cells = <1>;
+
+		/*
+		 * Region type 0x0 - MC portals
+		 * Region type 0x1 - QBMAN portals
+		 */
+		ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
+			  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
+
+		dpmacs {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dpmac1: dpmac@1 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <1>;
+			};
+
+			dpmac2: dpmac@2 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <2>;
+			};
+
+			dpmac3: dpmac@3 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <3>;
+			};
+
+			dpmac4: dpmac@4 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <4>;
+			};
+
+			dpmac5: dpmac@5 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <5>;
+			};
+
+			dpmac6: dpmac@6 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <6>;
+			};
+
+			dpmac7: dpmac@7 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <7>;
+			};
+
+			dpmac8: dpmac@8 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <8>;
+			};
+
+			dpmac9: dpmac@9 {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <9>;
+			};
+
+			dpmac10: dpmac@a {
+				compatible = "fsl,qoriq-mc-dpmac";
+				reg = <0xa>;
+			};
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
@@ -191,6 +262,12 @@
 			clocks = <&sysclk>;
 		};
 
+		dcfg: dcfg@1e00000 {
+			compatible = "fsl,ls1088a-dcfg", "syscon";
+			reg = <0x0 0x1e00000 0x0 0x10000>;
+			little-endian;
+		};
+
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;