Merge tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "Updates for the interrupt core and driver subsystem:

  The bulk is the rework of the MSI subsystem to support per device MSI
  interrupt domains. This solves conceptual problems of the current
  PCI/MSI design which are in the way of providing support for
  PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.

  IMS (Interrupt Message Store] is a new specification which allows
  device manufactures to provide implementation defined storage for MSI
  messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
  message store which is uniform accross all devices). The PCI/MSI[-X]
  uniformity allowed us to get away with "global" PCI/MSI domains.

  IMS not only allows to overcome the size limitations of the MSI-X
  table, but also gives the device manufacturer the freedom to store the
  message in arbitrary places, even in host memory which is shared with
  the device.

  There have been several attempts to glue this into the current MSI
  code, but after lengthy discussions it turned out that there is a
  fundamental design problem in the current PCI/MSI-X implementation.
  This needs some historical background.

  When PCI/MSI[-X] support was added around 2003, interrupt management
  was completely different from what we have today in the actively
  developed architectures. Interrupt management was completely
  architecture specific and while there were attempts to create common
  infrastructure the commonalities were rudimentary and just providing
  shared data structures and interfaces so that drivers could be written
  in an architecture agnostic way.

  The initial PCI/MSI[-X] support obviously plugged into this model
  which resulted in some basic shared infrastructure in the PCI core
  code for setting up MSI descriptors, which are a pure software
  construct for holding data relevant for a particular MSI interrupt,
  but the actual association to Linux interrupts was completely
  architecture specific. This model is still supported today to keep
  museum architectures and notorious stragglers alive.

  In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
  kernel, which was creating yet another architecture specific mechanism
  and resulted in an unholy mess on top of the existing horrors of x86
  interrupt handling. The x86 interrupt management code was already an
  incomprehensible maze of indirections between the CPU vector
  management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
  implementation.

  At roughly the same time ARM struggled with the ever growing SoC
  specific extensions which were glued on top of the architected GIC
  interrupt controller.

  This resulted in a fundamental redesign of interrupt management and
  provided the today prevailing concept of hierarchical interrupt
  domains. This allowed to disentangle the interactions between x86
  vector domain and interrupt remapping and also allowed ARM to handle
  the zoo of SoC specific interrupt components in a sane way.

  The concept of hierarchical interrupt domains aims to encapsulate the
  functionality of particular IP blocks which are involved in interrupt
  delivery so that they become extensible and pluggable. The X86
  encapsulation looks like this:

                                            |--- device 1
     [Vector]---[Remapping]---[PCI/MSI]--|...
                                            |--- device N

  where the remapping domain is an optional component and in case that
  it is not available the PCI/MSI[-X] domains have the vector domain as
  their parent. This reduced the required interaction between the
  domains pretty much to the initialization phase where it is obviously
  required to establish the proper parent relation ship in the
  components of the hierarchy.

  While in most cases the model is strictly representing the chain of IP
  blocks and abstracting them so they can be plugged together to form a
  hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
  hardware it's clear that the actual PCI/MSI[-X] interrupt controller
  is not a global entity, but strict a per PCI device entity.

  Here we took a short cut on the hierarchical model and went for the
  easy solution of providing "global" PCI/MSI domains which was possible
  because the PCI/MSI[-X] handling is uniform across the devices. This
  also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
  unchanged which in turn made it simple to keep the existing
  architecture specific management alive.

  A similar problem was created in the ARM world with support for IP
  block specific message storage. Instead of going all the way to stack
  a IP block specific domain on top of the generic MSI domain this ended
  in a construct which provides a "global" platform MSI domain which
  allows overriding the irq_write_msi_msg() callback per allocation.

  In course of the lengthy discussions we identified other abuse of the
  MSI infrastructure in wireless drivers, NTB etc. where support for
  implementation specific message storage was just mindlessly glued into
  the existing infrastructure. Some of this just works by chance on
  particular platforms but will fail in hard to diagnose ways when the
  driver is used on platforms where the underlying MSI interrupt
  management code does not expect the creative abuse.

  Another shortcoming of today's PCI/MSI-X support is the inability to
  allocate or free individual vectors after the initial enablement of
  MSI-X. This results in an works by chance implementation of VFIO (PCI
  pass-through) where interrupts on the host side are not set up upfront
  to avoid resource exhaustion. They are expanded at run-time when the
  guest actually tries to use them. The way how this is implemented is
  that the host disables MSI-X and then re-enables it with a larger
  number of vectors again. That works by chance because most device
  drivers set up all interrupts before the device actually will utilize
  them. But that's not universally true because some drivers allocate a
  large enough number of vectors but do not utilize them until it's
  actually required, e.g. for acceleration support. But at that point
  other interrupts of the device might be in active use and the MSI-X
  disable/enable dance can just result in losing interrupts and
  therefore hard to diagnose subtle problems.

  Last but not least the "global" PCI/MSI-X domain approach prevents to
  utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
  that IMS is not longer providing a uniform storage and configuration
  model.

  The solution to this is to implement the missing step and switch from
  global PCI/MSI domains to per device PCI/MSI domains. The resulting
  hierarchy then looks like this:

                              |--- [PCI/MSI] device 1
     [Vector]---[Remapping]---|...
                              |--- [PCI/MSI] device N

  which in turn allows to provide support for multiple domains per
  device:

                              |--- [PCI/MSI] device 1
                              |--- [PCI/IMS] device 1
     [Vector]---[Remapping]---|...
                              |--- [PCI/MSI] device N
                              |--- [PCI/IMS] device N

  This work converts the MSI and PCI/MSI core and the x86 interrupt
  domains to the new model, provides new interfaces for post-enable
  allocation/free of MSI-X interrupts and the base framework for
  PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
  driver.

  There is work in progress to convert ARM over which will replace the
  platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
  "solutions" are in the works as well.

  Drivers:

   - Updates for the LoongArch interrupt chip drivers

   - Support for MTK CIRQv2

   - The usual small fixes and updates all over the place"

* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
  irqchip/ti-sci-inta: Fix kernel doc
  irqchip/gic-v2m: Mark a few functions __init
  irqchip/gic-v2m: Include arm-gic-common.h
  irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
  iommu/amd: Enable PCI/IMS
  iommu/vt-d: Enable PCI/IMS
  x86/apic/msi: Enable PCI/IMS
  PCI/MSI: Provide pci_ims_alloc/free_irq()
  PCI/MSI: Provide IMS (Interrupt Message Store) support
  genirq/msi: Provide constants for PCI/IMS support
  x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
  PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
  PCI/MSI: Provide prepare_desc() MSI domain op
  PCI/MSI: Split MSI-X descriptor setup
  genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
  genirq/msi: Provide msi_domain_alloc_irq_at()
  genirq/msi: Provide msi_domain_ops:: Prepare_desc()
  genirq/msi: Provide msi_desc:: Msi_data
  genirq/msi: Provide struct msi_map
  x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
  ...

13 files changed, 152 insertions, 106 deletions

diff --git a/arch/loongarch/include/asm/irq.h b/arch/loongarch/include/asm/irq.h
index 5332b1433f38..a115e8999c69 100644
--- a/arch/loongarch/include/asm/irq.h
+++ b/arch/loongarch/include/asm/irq.h
@@ -93,7 +93,7 @@ int liointc_acpi_init(struct irq_domain *parent,
 int eiointc_acpi_init(struct irq_domain *parent,
 					struct acpi_madt_eio_pic *acpi_eiointc);
 
-struct irq_domain *htvec_acpi_init(struct irq_domain *parent,
+int htvec_acpi_init(struct irq_domain *parent,
 					struct acpi_madt_ht_pic *acpi_htvec);
 int pch_lpc_acpi_init(struct irq_domain *parent,
 					struct acpi_madt_lpc_pic *acpi_pchlpc);
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index a3a71d37cb9a..3f05507e444d 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -447,21 +447,18 @@ static void pseries_msi_ops_msi_free(struct irq_domain *domain,
  * RTAS can not disable one MSI at a time. It's all or nothing. Do it
  * at the end after all IRQs have been freed.
  */
-static void pseries_msi_domain_free_irqs(struct irq_domain *domain,
-					 struct device *dev)
+static void pseries_msi_post_free(struct irq_domain *domain, struct device *dev)
 {
 	if (WARN_ON_ONCE(!dev_is_pci(dev)))
 		return;
 
-	__msi_domain_free_irqs(domain, dev);
-
 	rtas_disable_msi(to_pci_dev(dev));
 }
 
 static struct msi_domain_ops pseries_pci_msi_domain_ops = {
 	.msi_prepare	= pseries_msi_ops_prepare,
 	.msi_free	= pseries_msi_ops_msi_free,
-	.domain_free_irqs = pseries_msi_domain_free_irqs,
+	.msi_post_free	= pseries_msi_post_free,
 };
 
 static void pseries_msi_shutdown(struct irq_data *d)
diff --git a/arch/um/drivers/Kconfig b/arch/um/drivers/Kconfig
index 5903e2b598aa..a4f0a19fbe14 100644
--- a/arch/um/drivers/Kconfig
+++ b/arch/um/drivers/Kconfig
@@ -381,7 +381,6 @@ config UML_PCI_OVER_VIRTIO
 	select UML_IOMEM_EMULATION
 	select UML_DMA_EMULATION
 	select PCI_MSI
-	select PCI_MSI_IRQ_DOMAIN
 	select PCI_LOCKLESS_CONFIG
 
 config UML_PCI_OVER_VIRTIO_DEVICE_ID
diff --git a/arch/um/include/asm/pci.h b/arch/um/include/asm/pci.h
index 34fe4921b5fa..238d2e7faff8 100644
--- a/arch/um/include/asm/pci.h
+++ b/arch/um/include/asm/pci.h
@@ -7,7 +7,7 @@
 /* Generic PCI */
 #include <asm-generic/pci.h>
 
-#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
+#ifdef CONFIG_PCI_MSI
 /*
  * This is a bit of an annoying hack, and it assumes we only have
  * the virt-pci (if anything). Which is true, but still.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 7d11f718ff0c..e2eebb193ee0 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1110,7 +1110,6 @@ config X86_LOCAL_APIC
 	def_bool y
 	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI
 	select IRQ_DOMAIN_HIERARCHY
-	select PCI_MSI_IRQ_DOMAIN if PCI_MSI
 
 config X86_IO_APIC
 	def_bool y
diff --git a/arch/x86/include/asm/hyperv_timer.h b/arch/x86/include/asm/hyperv_timer.h
new file mode 100644
index 000000000000..388fa81b8f38
--- /dev/null
+++ b/arch/x86/include/asm/hyperv_timer.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_HYPERV_TIMER_H
+#define _ASM_X86_HYPERV_TIMER_H
+
+#include <asm/msr.h>
+
+#define hv_get_raw_timer() rdtsc_ordered()
+
+#endif
diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h
index 7cc49432187f..7a2ed154a5e1 100644
--- a/arch/x86/include/asm/irq_remapping.h
+++ b/arch/x86/include/asm/irq_remapping.h
@@ -44,10 +44,6 @@ extern int irq_remapping_reenable(int);
 extern int irq_remap_enable_fault_handling(void);
 extern void panic_if_irq_remap(const char *msg);
 
-/* Create PCI MSI/MSIx irqdomain, use @parent as the parent irqdomain. */
-extern struct irq_domain *
-arch_create_remap_msi_irq_domain(struct irq_domain *par, const char *n, int id);
-
 /* Get parent irqdomain for interrupt remapping irqdomain */
 static inline struct irq_domain *arch_get_ir_parent_domain(void)
 {
diff --git a/arch/x86/include/asm/irqdomain.h b/arch/x86/include/asm/irqdomain.h
index 125c23b7bad3..30c325c235c0 100644
--- a/arch/x86/include/asm/irqdomain.h
+++ b/arch/x86/include/asm/irqdomain.h
@@ -7,9 +7,7 @@
 
 #ifdef CONFIG_X86_LOCAL_APIC
 enum {
-	/* Allocate contiguous CPU vectors */
-	X86_IRQ_ALLOC_CONTIGUOUS_VECTORS		= 0x1,
-	X86_IRQ_ALLOC_LEGACY				= 0x2,
+	X86_IRQ_ALLOC_LEGACY				= 0x1,
 };
 
 extern int x86_fwspec_is_ioapic(struct irq_fwspec *fwspec);
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 61f0c206bff0..6d502f3efb0f 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -19,8 +19,6 @@ typedef int (*hyperv_fill_flush_list_func)(
 		struct hv_guest_mapping_flush_list *flush,
 		void *data);
 
-#define hv_get_raw_timer() rdtsc_ordered()
-
 void hyperv_vector_handler(struct pt_regs *regs);
 
 #if IS_ENABLED(CONFIG_HYPERV)
diff --git a/arch/x86/include/asm/msi.h b/arch/x86/include/asm/msi.h
index d71c7e8b738d..935c6d470341 100644
--- a/arch/x86/include/asm/msi.h
+++ b/arch/x86/include/asm/msi.h
@@ -62,4 +62,10 @@ typedef struct x86_msi_addr_hi {
 struct msi_msg;
 u32 x86_msi_msg_get_destid(struct msi_msg *msg, bool extid);
 
+#define X86_VECTOR_MSI_FLAGS_SUPPORTED					\
+	(MSI_GENERIC_FLAGS_MASK | MSI_FLAG_PCI_MSIX | MSI_FLAG_PCI_MSIX_ALLOC_DYN)
+
+#define X86_VECTOR_MSI_FLAGS_REQUIRED					\
+	(MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS)
+
 #endif /* _ASM_X86_MSI_H */
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 736793d65bcb..b40c462b4af3 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -21,7 +21,7 @@ struct pci_sysdata {
 #ifdef CONFIG_X86_64
 	void		*iommu;		/* IOMMU private data */
 #endif
-#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
+#ifdef CONFIG_PCI_MSI
 	void		*fwnode;	/* IRQ domain for MSI assignment */
 #endif
 #if IS_ENABLED(CONFIG_VMD)
@@ -52,7 +52,7 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 }
 #endif
 
-#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
+#ifdef CONFIG_PCI_MSI
 static inline void *_pci_root_bus_fwnode(struct pci_bus *bus)
 {
 	return to_pci_sysdata(bus)->fwnode;
@@ -92,6 +92,7 @@ void pcibios_scan_root(int bus);
 struct irq_routing_table *pcibios_get_irq_routing_table(void);
 int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
 
+bool pci_dev_has_default_msi_parent_domain(struct pci_dev *dev);
 
 #define HAVE_PCI_MMAP
 #define arch_can_pci_mmap_wc()	pat_enabled()
diff --git a/arch/x86/kernel/apic/msi.c b/arch/x86/kernel/apic/msi.c
index 7517eb05bdc1..35d5b8fb18ef 100644
--- a/arch/x86/kernel/apic/msi.c
+++ b/arch/x86/kernel/apic/msi.c
@@ -142,70 +142,139 @@ msi_set_affinity(struct irq_data *irqd, const struct cpumask *mask, bool force)
 	return ret;
 }
 
-/*
- * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
- * which implement the MSI or MSI-X Capability Structure.
+/**
+ * pci_dev_has_default_msi_parent_domain - Check whether the device has the default
+ *					   MSI parent domain associated
+ * @dev:	Pointer to the PCI device
  */
-static struct irq_chip pci_msi_controller = {
-	.name			= "PCI-MSI",
-	.irq_unmask		= pci_msi_unmask_irq,
-	.irq_mask		= pci_msi_mask_irq,
-	.irq_ack		= irq_chip_ack_parent,
-	.irq_retrigger		= irq_chip_retrigger_hierarchy,
-	.irq_set_affinity	= msi_set_affinity,
-	.flags			= IRQCHIP_SKIP_SET_WAKE |
-				  IRQCHIP_AFFINITY_PRE_STARTUP,
-};
+bool pci_dev_has_default_msi_parent_domain(struct pci_dev *dev)
+{
+	struct irq_domain *domain = dev_get_msi_domain(&dev->dev);
 
-int pci_msi_prepare(struct irq_domain *domain, struct device *dev, int nvec,
-		    msi_alloc_info_t *arg)
+	if (!domain)
+		domain = dev_get_msi_domain(&dev->bus->dev);
+	if (!domain)
+		return false;
+
+	return domain == x86_vector_domain;
+}
+
+/**
+ * x86_msi_prepare - Setup of msi_alloc_info_t for allocations
+ * @domain:	The domain for which this setup happens
+ * @dev:	The device for which interrupts are allocated
+ * @nvec:	The number of vectors to allocate
+ * @alloc:	The allocation info structure to initialize
+ *
+ * This function is to be used for all types of MSI domains above the x86
+ * vector domain and any intermediates. It is always invoked from the
+ * top level interrupt domain. The domain specific allocation
+ * functionality is determined via the @domain's bus token which allows to
+ * map the X86 specific allocation type.
+ */
+static int x86_msi_prepare(struct irq_domain *domain, struct device *dev,
+			   int nvec, msi_alloc_info_t *alloc)
 {
-	init_irq_alloc_info(arg, NULL);
-	if (to_pci_dev(dev)->msix_enabled) {
-		arg->type = X86_IRQ_ALLOC_TYPE_PCI_MSIX;
-	} else {
-		arg->type = X86_IRQ_ALLOC_TYPE_PCI_MSI;
-		arg->flags |= X86_IRQ_ALLOC_CONTIGUOUS_VECTORS;
+	struct msi_domain_info *info = domain->host_data;
+
+	init_irq_alloc_info(alloc, NULL);
+
+	switch (info->bus_token) {
+	case DOMAIN_BUS_PCI_DEVICE_MSI:
+		alloc->type = X86_IRQ_ALLOC_TYPE_PCI_MSI;
+		return 0;
+	case DOMAIN_BUS_PCI_DEVICE_MSIX:
+	case DOMAIN_BUS_PCI_DEVICE_IMS:
+		alloc->type = X86_IRQ_ALLOC_TYPE_PCI_MSIX;
+		return 0;
+	default:
+		return -EINVAL;
 	}
-
-	return 0;
 }
-EXPORT_SYMBOL_GPL(pci_msi_prepare);
 
-static struct msi_domain_ops pci_msi_domain_ops = {
-	.msi_prepare	= pci_msi_prepare,
-};
+/**
+ * x86_init_dev_msi_info - Domain info setup for MSI domains
+ * @dev:		The device for which the domain should be created
+ * @domain:		The (root) domain providing this callback
+ * @real_parent:	The real parent domain of the to initialize domain
+ * @info:		The domain info for the to initialize domain
+ *
+ * This function is to be used for all types of MSI domains above the x86
+ * vector domain and any intermediates. The domain specific functionality
+ * is determined via the @real_parent.
+ */
+static bool x86_init_dev_msi_info(struct device *dev, struct irq_domain *domain,
+				  struct irq_domain *real_parent, struct msi_domain_info *info)
+{
+	const struct msi_parent_ops *pops = real_parent->msi_parent_ops;
+
+	/* MSI parent domain specific settings */
+	switch (real_parent->bus_token) {
+	case DOMAIN_BUS_ANY:
+		/* Only the vector domain can have the ANY token */
+		if (WARN_ON_ONCE(domain != real_parent))
+			return false;
+		info->chip->irq_set_affinity = msi_set_affinity;
+		/* See msi_set_affinity() for the gory details */
+		info->flags |= MSI_FLAG_NOMASK_QUIRK;
+		break;
+	case DOMAIN_BUS_DMAR:
+	case DOMAIN_BUS_AMDVI:
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		return false;
+	}
+
+	/* Is the target supported? */
+	switch(info->bus_token) {
+	case DOMAIN_BUS_PCI_DEVICE_MSI:
+	case DOMAIN_BUS_PCI_DEVICE_MSIX:
+		break;
+	case DOMAIN_BUS_PCI_DEVICE_IMS:
+		if (!(pops->supported_flags & MSI_FLAG_PCI_IMS))
+			return false;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		return false;
+	}
+
+	/*
+	 * Mask out the domain specific MSI feature flags which are not
+	 * supported by the real parent.
+	 */
+	info->flags			&= pops->supported_flags;
+	/* Enforce the required flags */
+	info->flags			|= X86_VECTOR_MSI_FLAGS_REQUIRED;
+
+	/* This is always invoked from the top level MSI domain! */
+	info->ops->msi_prepare		= x86_msi_prepare;
+
+	info->chip->irq_ack		= irq_chip_ack_parent;
+	info->chip->irq_retrigger	= irq_chip_retrigger_hierarchy;
+	info->chip->flags		|= IRQCHIP_SKIP_SET_WAKE |
+					   IRQCHIP_AFFINITY_PRE_STARTUP;
 
-static struct msi_domain_info pci_msi_domain_info = {
-	.flags		= MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-			  MSI_FLAG_PCI_MSIX,
-	.ops		= &pci_msi_domain_ops,
-	.chip		= &pci_msi_controller,
-	.handler	= handle_edge_irq,
-	.handler_name	= "edge",
+	info->handler			= handle_edge_irq;
+	info->handler_name		= "edge";
+
+	return true;
+}
+
+static const struct msi_parent_ops x86_vector_msi_parent_ops = {
+	.supported_flags	= X86_VECTOR_MSI_FLAGS_SUPPORTED,
+	.init_dev_msi_info	= x86_init_dev_msi_info,
 };
 
 struct irq_domain * __init native_create_pci_msi_domain(void)
 {
-	struct fwnode_handle *fn;
-	struct irq_domain *d;
-
 	if (disable_apic)
 		return NULL;
 
-	fn = irq_domain_alloc_named_fwnode("PCI-MSI");
-	if (!fn)
-		return NULL;
-
-	d = pci_msi_create_irq_domain(fn, &pci_msi_domain_info,
-				      x86_vector_domain);
-	if (!d) {
-		irq_domain_free_fwnode(fn);
-		pr_warn("Failed to initialize PCI-MSI irqdomain.\n");
-	} else {
-		d->flags |= IRQ_DOMAIN_MSI_NOMASK_QUIRK;
-	}
-	return d;
+	x86_vector_domain->flags |= IRQ_DOMAIN_FLAG_MSI_PARENT;
+	x86_vector_domain->msi_parent_ops = &x86_vector_msi_parent_ops;
+	return x86_vector_domain;
 }
 
 void __init x86_create_pci_msi_domain(void)
@@ -213,41 +282,19 @@ void __init x86_create_pci_msi_domain(void)
 	x86_pci_msi_default_domain = x86_init.irqs.create_pci_msi_domain();
 }
 
-#ifdef CONFIG_IRQ_REMAP
-static struct irq_chip pci_msi_ir_controller = {
-	.name			= "IR-PCI-MSI",
-	.irq_unmask		= pci_msi_unmask_irq,
-	.irq_mask		= pci_msi_mask_irq,
-	.irq_ack		= irq_chip_ack_parent,
-	.irq_retrigger		= irq_chip_retrigger_hierarchy,
-	.flags			= IRQCHIP_SKIP_SET_WAKE |
-				  IRQCHIP_AFFINITY_PRE_STARTUP,
-};
-
-static struct msi_domain_info pci_msi_ir_domain_info = {
-	.flags		= MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-			  MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX,
-	.ops		= &pci_msi_domain_ops,
-	.chip		= &pci_msi_ir_controller,
-	.handler	= handle_edge_irq,
-	.handler_name	= "edge",
-};
-
-struct irq_domain *arch_create_remap_msi_irq_domain(struct irq_domain *parent,
-						    const char *name, int id)
+/* Keep around for hyperV */
+int pci_msi_prepare(struct irq_domain *domain, struct device *dev, int nvec,
+		    msi_alloc_info_t *arg)
 {
-	struct fwnode_handle *fn;
-	struct irq_domain *d;
+	init_irq_alloc_info(arg, NULL);
 
-	fn = irq_domain_alloc_named_id_fwnode(name, id);
-	if (!fn)
-		return NULL;
-	d = pci_msi_create_irq_domain(fn, &pci_msi_ir_domain_info, parent);
-	if (!d)
-		irq_domain_free_fwnode(fn);
-	return d;
+	if (to_pci_dev(dev)->msix_enabled)
+		arg->type = X86_IRQ_ALLOC_TYPE_PCI_MSIX;
+	else
+		arg->type = X86_IRQ_ALLOC_TYPE_PCI_MSI;
+	return 0;
 }
-#endif
+EXPORT_SYMBOL_GPL(pci_msi_prepare);
 
 #ifdef CONFIG_DMAR_TABLE
 /*
diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index 3e6f6b448f6a..c1efebd27e6c 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -539,10 +539,6 @@ static int x86_vector_alloc_irqs(struct irq_domain *domain, unsigned int virq,
 	if (disable_apic)
 		return -ENXIO;
 
-	/* Currently vector allocator can't guarantee contiguous allocations */
-	if ((info->flags & X86_IRQ_ALLOC_CONTIGUOUS_VECTORS) && nr_irqs > 1)
-		return -ENOSYS;
-
 	/*
 	 * Catch any attempt to touch the cascade interrupt on a PIC
 	 * equipped system.