Merge remote-tracking branch 'ux500-core/ux500-core'

12 files changed, 302 insertions, 60 deletions

diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index a5cce242a775..97d31a4663da 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -11,12 +11,12 @@ CONFIG_ARCH_U8500=y
 CONFIG_UX500_SOC_DB5500=y
 CONFIG_UX500_SOC_DB8500=y
 CONFIG_MACH_U8500=y
+CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
@@ -25,8 +25,13 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_NETFILTER=y
 CONFIG_PHONET=y
-CONFIG_PHONET_PIPECTRLR=y
 # CONFIG_WIRELESS is not set
 CONFIG_CAIF=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -35,6 +40,13 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_MISC_DEVICES=y
 CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
@@ -49,9 +61,9 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_AB8500_PONKEY=y
 # CONFIG_SERIO is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_NOMADIK=y
 CONFIG_I2C=y
@@ -64,14 +76,19 @@ CONFIG_GPIO_TC3589X=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
 CONFIG_AB8500_CORE=y
-CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AB8500=y
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_GADGET=y
+CONFIG_AB8500_USB=y
 CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_LP5521=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
@@ -79,7 +96,6 @@ CONFIG_RTC_DRV_PL031=y
 CONFIG_DMADEVICES=y
 CONFIG_STE_DMA40=y
 CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
 CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
@@ -91,6 +107,8 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
@@ -99,7 +117,5 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
index 5767208f1c1d..7b597e2b19e2 100644
--- a/arch/arm/mach-u300/spi.c
+++ b/arch/arm/mach-u300/spi.c
@@ -40,8 +40,8 @@ struct pl022_config_chip dummy_chip_info = {
 	.hierarchy = SSP_MASTER,
 	/* 0 = drive TX even as slave, 1 = do not drive TX as slave */
 	.slave_tx_disable = 0,
-	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
-	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+	.rx_lev_trig = SSP_RX_4_OR_MORE_ELEM,
+	.tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC,
 	.ctrl_len = SSP_BITS_12,
 	.wait_state = SSP_MWIRE_WAIT_ZERO,
 	.duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 18d7fa0603c2..5f51bdeef0ef 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -27,9 +27,6 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define APPTIMER_MIN_RANGE 4
-
 /*
  * APP side special timer registers
  * This timer contains four timers which can fire an interrupt each.
@@ -309,11 +306,11 @@ static int u300_set_next_event(unsigned long cycles,
 
 /* Use general purpose timer 1 as clock event */
 static struct clock_event_device clockevent_u300_1mhz = {
-	.name           = "GPT1",
-	.rating         = 300, /* Reasonably fast and accurate clock event */
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event = u300_set_next_event,
-	.set_mode       = u300_set_mode,
+	.name		= "GPT1",
+	.rating		= 300, /* Reasonably fast and accurate clock event */
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event	= u300_set_next_event,
+	.set_mode	= u300_set_mode,
 };
 
 /* Clock event timer interrupt handler */
@@ -328,9 +325,9 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
 }
 
 static struct irqaction u300_timer_irq = {
-	.name           = "U300 Timer Tick",
-	.flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler        = u300_timer_interrupt,
+	.name		= "U300 Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= u300_timer_interrupt,
 };
 
 /*
@@ -413,16 +410,10 @@ static void __init u300_timer_init(void)
 			"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
 		pr_err("timer: failed to initialize U300 clock source\n");
 
-	clockevents_calc_mult_shift(&clockevent_u300_1mhz,
-				    rate, APPTIMER_MIN_RANGE);
-	/* 32bit counter, so 32bits delta is max */
-	clockevent_u300_1mhz.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz);
-	/* This timer is slow enough to set for 1 cycle == 1 MHz */
-	clockevent_u300_1mhz.min_delta_ns =
-		clockevent_delta2ns(1, &clockevent_u300_1mhz);
-	clockevent_u300_1mhz.cpumask = cpumask_of(0);
-	clockevents_register_device(&clockevent_u300_1mhz);
+	/* Configure and register the clockevent */
+	clockevents_config_and_register(&clockevent_u300_1mhz, rate,
+					1, 0xffffffff);
+
 	/*
 	 * TODO: init and register the rest of the timers too, they can be
 	 * used by hrtimers!
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index f8b9392ee347..4210cb434dbc 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -20,7 +20,7 @@ config UX500_SOC_DB8500
 
 endmenu
 
-menu "Ux500 target platform"
+menu "Ux500 target platform (boards)"
 
 config MACH_U8500
 	bool "U8500 Development platform"
@@ -29,6 +29,19 @@ config MACH_U8500
 	help
 	  Include support for the mop500 development platform.
 
+config MACH_HREFV60
+       bool "U85000 Development platform, HREFv60 version"
+       depends on UX500_SOC_DB8500
+       help
+         Include support for the HREFv60 new development platform.
+
+config MACH_SNOWBALL
+	bool "U8500 Snowball platform"
+	depends on UX500_SOC_DB8500
+	select MACH_U8500
+	help
+	  Include support for the snowball development platform.
+
 config MACH_U5500
 	bool "U5500 Development platform"
 	depends on UX500_SOC_DB5500
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 70cdbd60596a..f26fd76f72b4 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -236,6 +236,46 @@ static pin_cfg_t mop500_pins_hrefv60[] = {
 
 };
 
+static pin_cfg_t snowball_pins[] = {
+	/* SSP0, to AB8500 */
+	GPIO143_SSP0_CLK,
+	GPIO144_SSP0_FRM,
+	GPIO145_SSP0_RXD	| PIN_PULL_DOWN,
+	GPIO146_SSP0_TXD,
+
+	/* MMC0: MicroSD card */
+	GPIO21_MC0_DAT31DIR     | PIN_OUTPUT_HIGH,
+
+	/* MMC2: LAN */
+	GPIO86_SM_ADQ0,
+	GPIO87_SM_ADQ1,
+	GPIO88_SM_ADQ2,
+	GPIO89_SM_ADQ3,
+	GPIO90_SM_ADQ4,
+	GPIO91_SM_ADQ5,
+	GPIO92_SM_ADQ6,
+	GPIO93_SM_ADQ7,
+
+	GPIO94_SM_ADVn,
+	GPIO95_SM_CS0n,
+	GPIO96_SM_OEn,
+	GPIO97_SM_WEn,
+
+	GPIO128_SM_CKO,
+	GPIO130_SM_FBCLK,
+	GPIO131_SM_ADQ8,
+	GPIO132_SM_ADQ9,
+	GPIO133_SM_ADQ10,
+	GPIO134_SM_ADQ11,
+	GPIO135_SM_ADQ12,
+	GPIO136_SM_ADQ13,
+	GPIO137_SM_ADQ14,
+	GPIO138_SM_ADQ15,
+
+	/* RSTn_LAN */
+	GPIO141_GPIO		| PIN_OUTPUT_HIGH,
+};
+
 void __init mop500_pins_init(void)
 {
 	nmk_config_pins(mop500_pins_common,
@@ -243,6 +283,9 @@ void __init mop500_pins_init(void)
 	if (machine_is_hrefv60())
 		nmk_config_pins(mop500_pins_hrefv60,
 				ARRAY_SIZE(mop500_pins_hrefv60));
+	else if (machine_is_snowball())
+		nmk_config_pins(snowball_pins,
+				ARRAY_SIZE(snowball_pins));
 	else
 		nmk_config_pins(mop500_pins_default,
 				ARRAY_SIZE(mop500_pins_default));
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 9ed0f90cfe23..c0bc833df903 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -272,7 +272,14 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
 			.max_uV = 2900000,
 			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
 					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1, /* must be on for display */
+			.boot_on = 1, /* display is on at boot */
+			/*
+			 * This voltage cannot be disabled right now because
+			 * it is somehow affecting the external MMC
+			 * functionality, though that typically will use
+			 * AUX3.
+			 */
+			.always_on = 1,
 		},
 		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
 		.consumer_supplies = ab8500_vaux1_consumers,
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 7c6cb4fa47a9..d0cb9e5eb87c 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -32,13 +32,32 @@
 #define MCI_DATA31DIREN		(1 << 5)
 #define MCI_FBCLKEN		(1 << 7)
 
+/* GPIO pins used by the sdi0 level shifter */
+static int sdi0_en = -1;
+static int sdi0_vsel = -1;
+
 static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd,
 				   unsigned char power_mode)
 {
-	if (power_mode == MMC_POWER_UP)
-		gpio_set_value_cansleep(GPIO_SDMMC_EN, 1);
-	else if (power_mode == MMC_POWER_OFF)
-		gpio_set_value_cansleep(GPIO_SDMMC_EN, 0);
+	switch (power_mode) {
+	case MMC_POWER_UP:
+	case MMC_POWER_ON:
+		/*
+		 * Level shifter voltage should depend on vdd to when deciding
+		 * on either 1.8V or 2.9V. Once the decision has been made the
+		 * level shifter must be disabled and re-enabled with a changed
+		 * select signal in order to switch the voltage. Since there is
+		 * no framework support yet for indicating 1.8V in vdd, use the
+		 * default 2.9V.
+		 */
+		gpio_direction_output(sdi0_vsel, 0);
+		gpio_direction_output(sdi0_en, 1);
+		break;
+	case MMC_POWER_OFF:
+		gpio_direction_output(sdi0_vsel, 0);
+		gpio_direction_output(sdi0_en, 0);
+		break;
+	}
 
 	return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN |
 	       MCI_DATA2DIREN | MCI_DATA31DIREN;
@@ -67,8 +86,10 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
 static struct mmci_platform_data mop500_sdi0_data = {
 	.vdd_handler	= mop500_sdi0_vdd_handler,
 	.ocr_mask	= MMC_VDD_29_30,
-	.f_max		= 100000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA,
+	.f_max		= 50000000,
+	.capabilities	= MMC_CAP_4_BIT_DATA |
+				MMC_CAP_SD_HIGHSPEED |
+				MMC_CAP_MMC_HIGHSPEED,
 	.gpio_wp	= -1,
 #ifdef CONFIG_STE_DMA40
 	.dma_filter	= stedma40_filter,
@@ -77,10 +98,6 @@ static struct mmci_platform_data mop500_sdi0_data = {
 #endif
 };
 
-/* GPIO pins used by the sdi0 level shifter */
-static int sdi0_en = -1;
-static int sdi0_vsel = -1;
-
 static void sdi0_configure(void)
 {
 	int ret;
@@ -140,7 +157,7 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
 
 static struct mmci_platform_data mop500_sdi2_data = {
 	.ocr_mask	= MMC_VDD_165_195,
-	.f_max		= 100000000,
+	.f_max		= 50000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 	.gpio_cd	= -1,
 	.gpio_wp	= -1,
@@ -177,7 +194,7 @@ static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
 
 static struct mmci_platform_data mop500_sdi4_data = {
 	.ocr_mask	= MMC_VDD_29_30,
-	.f_max		= 100000000,
+	.f_max		= 50000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_MMC_HIGHSPEED,
 	.gpio_cd	= -1,
@@ -199,17 +216,27 @@ void __init mop500_sdi_init(void)
 	/* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
 	if (!cpu_is_u8500v10())
 		mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
-	db8500_add_sdi2(&mop500_sdi2_data, periphid);
+	/* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */
+	if (!machine_is_snowball())
+		db8500_add_sdi2(&mop500_sdi2_data, periphid);
 
 	/* On-board eMMC */
 	db8500_add_sdi4(&mop500_sdi4_data, periphid);
 
-	if (machine_is_hrefv60()) {
-		mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
-		sdi0_en = HREFV60_SDMMC_EN_GPIO;
-		sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+	if (machine_is_hrefv60() || machine_is_snowball()) {
+		if (machine_is_hrefv60()) {
+			mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
+			sdi0_en = HREFV60_SDMMC_EN_GPIO;
+			sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+		} else if (machine_is_snowball()) {
+			mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
+			mop500_sdi0_data.cd_invert = true;
+			sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
+			sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
+		}
 		sdi0_configure();
 	}
+
 	/*
 	 * On boards with the TC35892 GPIO expander, sdi0 will finally
 	 * be added when the TC35892 initializes and calls
diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c
index 69cce41f602a..5af36aa56c08 100644
--- a/arch/arm/mach-ux500/board-mop500-uib.c
+++ b/arch/arm/mach-ux500/board-mop500-uib.c
@@ -25,7 +25,7 @@ struct uib {
 	void (*init)(void);
 };
 
-static struct __initdata uib mop500_uibs[] = {
+static struct uib __initdata mop500_uibs[] = {
 	[STUIB] = {
 		.name	= "ST-UIB",
 		.option	= "stuib",
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 2a08c07dec6d..cd54abaccd96 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -26,9 +26,11 @@
 #include <linux/mfd/ab8500/gpio.h>
 #include <linux/leds-lp5521.h>
 #include <linux/input.h>
+#include <linux/smsc911x.h>
 #include <linux/gpio_keys.h>
 #include <linux/delay.h>
 
+#include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -47,6 +49,26 @@
 #include "board-mop500.h"
 #include "board-mop500-regulators.h"
 
+static struct gpio_led snowball_led_array[] = {
+	{
+		.name = "user_led",
+		.default_trigger = "none",
+		.gpio = 142,
+	},
+};
+
+static struct gpio_led_platform_data snowball_led_data = {
+	.leds = snowball_led_array,
+	.num_leds = ARRAY_SIZE(snowball_led_array),
+};
+
+static struct platform_device snowball_led_dev = {
+	.name = "leds-gpio",
+	.dev = {
+		.platform_data = &snowball_led_data,
+	},
+};
+
 static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
 	.gpio_base		= MOP500_AB8500_GPIO(0),
 	.irq_base		= MOP500_AB8500_VIR_GPIO_IRQ_BASE,
@@ -69,6 +91,97 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
 					0x7A, 0x00, 0x00},
 };
 
+static struct gpio_keys_button snowball_key_array[] = {
+	{
+		.gpio           = 32,
+		.type           = EV_KEY,
+		.code           = KEY_1,
+		.desc           = "userpb",
+		.active_low     = 1,
+		.debounce_interval = 50,
+		.wakeup         = 1,
+	},
+	{
+		.gpio           = 151,
+		.type           = EV_KEY,
+		.code           = KEY_2,
+		.desc           = "extkb1",
+		.active_low     = 1,
+		.debounce_interval = 50,
+		.wakeup         = 1,
+	},
+	{
+		.gpio           = 152,
+		.type           = EV_KEY,
+		.code           = KEY_3,
+		.desc           = "extkb2",
+		.active_low     = 1,
+		.debounce_interval = 50,
+		.wakeup         = 1,
+	},
+	{
+		.gpio           = 161,
+		.type           = EV_KEY,
+		.code           = KEY_4,
+		.desc           = "extkb3",
+		.active_low     = 1,
+		.debounce_interval = 50,
+		.wakeup         = 1,
+	},
+	{
+		.gpio           = 162,
+		.type           = EV_KEY,
+		.code           = KEY_5,
+		.desc           = "extkb4",
+		.active_low     = 1,
+		.debounce_interval = 50,
+		.wakeup         = 1,
+	},
+};
+
+static struct gpio_keys_platform_data snowball_key_data = {
+	.buttons        = snowball_key_array,
+	.nbuttons       = ARRAY_SIZE(snowball_key_array),
+};
+
+static struct platform_device snowball_key_dev = {
+	.name           = "gpio-keys",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &snowball_key_data,
+	}
+};
+
+static struct smsc911x_platform_config snowball_sbnet_cfg = {
+	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.shift = 1,
+};
+
+static struct resource sbnet_res[] = {
+	{
+		.name = "smsc911x-memory",
+		.start = (0x5000 << 16),
+		.end  =  (0x5000 << 16) + 0xffff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = NOMADIK_GPIO_TO_IRQ(140),
+		.end = NOMADIK_GPIO_TO_IRQ(140),
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device snowball_sbnet_dev = {
+	.name           = "smsc911x",
+	.num_resources  = ARRAY_SIZE(sbnet_res),
+	.resource       = sbnet_res,
+	.dev            = {
+		.platform_data = &snowball_sbnet_cfg,
+	},
+};
+
 static struct ab8500_platform_data ab8500_platdata = {
 	.irq_base	= MOP500_AB8500_IRQ_BASE,
 	.regulator_reg_init = ab8500_regulator_reg_init,
@@ -295,8 +408,9 @@ static void mop500_prox_deactivate(struct device *dev)
 }
 
 /* add any platform devices here - TODO */
-static struct platform_device *platform_devs[] __initdata = {
+static struct platform_device *mop500_platform_devs[] __initdata = {
 	&mop500_gpio_keys_device,
+	&ab8500_device,
 };
 
 #ifdef CONFIG_STE_DMA40
@@ -478,6 +592,13 @@ static void __init mop500_uart_init(void)
 	db8500_add_uart2(&uart2_plat);
 }
 
+static struct platform_device *snowball_platform_devs[] __initdata = {
+	&snowball_led_dev,
+	&snowball_key_dev,
+	&snowball_sbnet_dev,
+	&ab8500_device,
+};
+
 static void __init mop500_init_machine(void)
 {
 	int i2c0_devs;
@@ -487,24 +608,29 @@ static void __init mop500_init_machine(void)
 	 * all these GPIO pins to the internal GPIO controller
 	 * instead.
 	 */
-	if (machine_is_hrefv60())
-		mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
-	else
-		mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+	if (!machine_is_snowball()) {
+		if (machine_is_hrefv60())
+			mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
+		else
+			mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+	}
 
 	u8500_init_devices();
 
 	mop500_pins_init();
 
-	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+	if (machine_is_snowball())
+		platform_add_devices(snowball_platform_devs,
+					ARRAY_SIZE(snowball_platform_devs));
+	else
+		platform_add_devices(mop500_platform_devs,
+					ARRAY_SIZE(mop500_platform_devs));
 
 	mop500_i2c_init();
 	mop500_sdi_init();
 	mop500_spi_init();
 	mop500_uart_init();
 
-	platform_device_register(&ab8500_device);
-
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 	if (machine_is_hrefv60())
 		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
@@ -512,6 +638,9 @@ static void __init mop500_init_machine(void)
 	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
 	i2c_register_board_info(2, mop500_i2c2_devices,
 				ARRAY_SIZE(mop500_i2c2_devices));
+
+	/* This board has full regulator constraints */
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
@@ -531,3 +660,12 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
 	.timer		= &ux500_timer,
 	.init_machine	= mop500_init_machine,
 MACHINE_END
+
+MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
+	.boot_params	= 0x100,
+	.map_io		= u8500_map_io,
+	.init_irq	= ux500_init_irq,
+	/* we re-use nomadik timer here */
+	.timer		= &ux500_timer,
+	.init_machine	= mop500_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 03a31cc9b084..ee77a8970c33 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -7,6 +7,11 @@
 #ifndef __BOARD_MOP500_H
 #define __BOARD_MOP500_H
 
+/* snowball GPIO for MMC card */
+#define SNOWBALL_SDMMC_EN_GPIO 217
+#define SNOWBALL_SDMMC_1V8_3V_GPIO 228
+#define SNOWBALL_SDMMC_CD_GPIO 218
+
 /* HREFv60-specific GPIO assignments, this board has no GPIO expander */
 #define HREFV60_TOUCH_RST_GPIO		143
 #define HREFV60_PROX_SENSE_GPIO		217
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index c01bc19e3c5e..22705d246fc7 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -44,6 +44,7 @@ static struct map_desc u5500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
 	__IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
 	__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
+	__IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K),
 };
 
 static struct resource db5500_pmu_resources[] = {
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 088b550c40df..7dd08074c37b 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -54,7 +54,8 @@ static inline void arch_decomp_setup(void)
 	if (machine_is_u8500() ||
 	    machine_is_svp8500v1() ||
 	    machine_is_svp8500v2() ||
-	    machine_is_hrefv60())
+	    machine_is_hrefv60()   ||
+	    machine_is_snowball())
 		ux500_uart_base = U8500_UART2_BASE;
 	else if (machine_is_u5500())
 		ux500_uart_base = U5500_UART0_BASE;