treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

5 files changed, 63 insertions, 63 deletions

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index ac25833eb19e..98c3a5d8003e 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -11,7 +11,7 @@ config TTY_PRINTK
 	tristate "TTY driver to output user messages via printk"
 	depends on EXPERT && TTY
 	default n
-	---help---
+	help
 	  If you say Y here, the support for writing user messages (i.e.
 	  console messages) via printk is available.
 
@@ -33,7 +33,7 @@ config TTY_PRINTK_LEVEL
 config PRINTER
 	tristate "Parallel printer support"
 	depends on PARPORT
-	---help---
+	help
 	  If you intend to attach a printer to the parallel port of your Linux
 	  box (as opposed to using a serial printer; if the connector at the
 	  printer has 9 or 25 holes ["female"], then it's serial), say Y.
@@ -59,7 +59,7 @@ config PRINTER
 config LP_CONSOLE
 	bool "Support for console on line printer"
 	depends on PRINTER
-	---help---
+	help
 	  If you want kernel messages to be printed out as they occur, you
 	  can have a console on the printer. This option adds support for
 	  doing that; to actually get it to happen you need to pass the
@@ -76,7 +76,7 @@ config LP_CONSOLE
 config PPDEV
 	tristate "Support for user-space parallel port device drivers"
 	depends on PARPORT
-	---help---
+	help
 	  Saying Y to this adds support for /dev/parport device nodes.  This
 	  is needed for programs that want portable access to the parallel
 	  port, for instance deviceid (which displays Plug-and-Play device
@@ -146,7 +146,7 @@ config DS1620
 config NWBUTTON
 	tristate "NetWinder Button"
 	depends on ARCH_NETWINDER
-	---help---
+	help
 	  If you say Y here and create a character device node /dev/nwbutton
 	  with major and minor numbers 10 and 158 ("man mknod"), then every
 	  time the orange button is pressed a number of times, the number of
@@ -182,7 +182,7 @@ config NWBUTTON_REBOOT
 config NWFLASH
 	tristate "NetWinder flash support"
 	depends on ARCH_NETWINDER
-	---help---
+	help
 	  If you say Y here and create a character device /dev/flash with
 	  major 10 and minor 160 you can manipulate the flash ROM containing
 	  the NetWinder firmware. Be careful as accidentally overwriting the
@@ -220,7 +220,7 @@ config XILINX_HWICAP
 config R3964
 	tristate "Siemens R3964 line discipline"
 	depends on TTY && BROKEN
-	---help---
+	help
 	  This driver allows synchronous communication with devices using the
 	  Siemens R3964 packet protocol. Unless you are dealing with special
 	  hardware like PLCs, you are unlikely to need this.
@@ -233,7 +233,7 @@ config R3964
 config APPLICOM
 	tristate "Applicom intelligent fieldbus card support"
 	depends on PCI
-	---help---
+	help
 	  This driver provides the kernel-side support for the intelligent
 	  fieldbus cards made by Applicom International. More information
 	  about these cards can be found on the WWW at the address
@@ -248,7 +248,7 @@ config APPLICOM
 config SONYPI
 	tristate "Sony Vaio Programmable I/O Control Device support"
 	depends on X86_32 && PCI && INPUT
-	---help---
+	help
 	  This driver enables access to the Sony Programmable I/O Control
 	  Device which can be found in many (all ?) Sony Vaio laptops.
 
@@ -269,7 +269,7 @@ config MWAVE
 	tristate "ACP Modem (Mwave) support"
 	depends on X86 && TTY
 	select SERIAL_8250
-	---help---
+	help
 	  The ACP modem (Mwave) for Linux is a WinModem. It is composed of a
 	  kernel driver and a user level application. Together these components
 	  support direct attachment to public switched telephone networks (PSTNs)
@@ -347,7 +347,7 @@ config NVRAM
 	tristate "/dev/nvram support"
 	depends on X86 || HAVE_ARCH_NVRAM_OPS
 	default M68K || PPC
-	---help---
+	help
 	  If you say Y here and create a character special file /dev/nvram
 	  with major number 10 and minor number 144 using mknod ("man mknod"),
 	  you get read and write access to the non-volatile memory.
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index bc54235a7022..a086dd34f932 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -3,7 +3,7 @@ menuconfig AGP
 	tristate "/dev/agpgart (AGP Support)"
 	depends on ALPHA || IA64 || PARISC || PPC || X86
 	depends on PCI
-	---help---
+	help
 	  AGP (Accelerated Graphics Port) is a bus system mainly used to
 	  connect graphics cards to the rest of the system.
 
@@ -30,7 +30,7 @@ menuconfig AGP
 config AGP_ALI
 	tristate "ALI chipset support"
 	depends on AGP && X86_32
-	---help---
+	help
 	  This option gives you AGP support for the GLX component of
 	  X on the following ALi chipsets.  The supported chipsets
 	  include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
@@ -45,7 +45,7 @@ config AGP_ALI
 config AGP_ATI
 	tristate "ATI chipset support"
 	depends on AGP && X86_32
-	---help---
+	help
 	  This option gives you AGP support for the GLX component of
 	  X on the ATI RadeonIGP family of chipsets.
 
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index ac00d78ee9cc..0ad17efc96df 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -6,7 +6,7 @@
 menuconfig HW_RANDOM
 	tristate "Hardware Random Number Generator Core support"
 	default m
-	---help---
+	help
 	  Hardware Random Number Generator Core infrastructure.
 
 	  To compile this driver as a module, choose M here: the
@@ -24,7 +24,7 @@ if HW_RANDOM
 config HW_RANDOM_TIMERIOMEM
 	tristate "Timer IOMEM HW Random Number Generator support"
 	depends on HAS_IOMEM
-	---help---
+	help
 	  This driver provides kernel-side support for a generic Random
 	  Number Generator used by reading a 'dumb' iomem address that
 	  is to be read no faster than, for example, once a second;
@@ -39,7 +39,7 @@ config HW_RANDOM_INTEL
 	tristate "Intel HW Random Number Generator support"
 	depends on (X86 || IA64) && PCI
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Intel i8xx-based motherboards.
 
@@ -52,7 +52,7 @@ config HW_RANDOM_AMD
 	tristate "AMD HW Random Number Generator support"
 	depends on (X86 || PPC_MAPLE) && PCI
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on AMD 76x-based motherboards.
 
@@ -65,7 +65,7 @@ config HW_RANDOM_ATMEL
 	tristate "Atmel Random Number Generator support"
 	depends on ARCH_AT91 && HAVE_CLK && OF
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Atmel AT91 devices.
 
@@ -79,7 +79,7 @@ config HW_RANDOM_BCM2835
 	depends on ARCH_BCM2835 || ARCH_BCM_NSP || ARCH_BCM_5301X || \
 		   ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on the Broadcom BCM2835 and BCM63xx SoCs.
 
@@ -92,7 +92,7 @@ config HW_RANDOM_IPROC_RNG200
 	tristate "Broadcom iProc/STB RNG200 support"
 	depends on ARCH_BCM_IPROC || ARCH_BCM2835 || ARCH_BRCMSTB
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the RNG200
 	  hardware found on the Broadcom iProc and STB SoCs.
 
@@ -105,7 +105,7 @@ config HW_RANDOM_GEODE
 	tristate "AMD Geode HW Random Number Generator support"
 	depends on X86_32 && PCI
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on the AMD Geode LX.
 
@@ -118,7 +118,7 @@ config HW_RANDOM_N2RNG
 	tristate "Niagara2 Random Number Generator support"
 	depends on SPARC64
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Niagara2 cpus.
 
@@ -131,7 +131,7 @@ config HW_RANDOM_VIA
 	tristate "VIA HW Random Number Generator support"
 	depends on X86
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on VIA based motherboards.
 
@@ -144,7 +144,7 @@ config HW_RANDOM_IXP4XX
 	tristate "Intel IXP4xx NPU HW Pseudo-Random Number Generator support"
 	depends on ARCH_IXP4XX
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Pseudo-Random
 	  Number Generator hardware found on the Intel IXP45x/46x NPU.
 
@@ -157,7 +157,7 @@ config HW_RANDOM_OMAP
 	tristate "OMAP Random Number Generator support"
 	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || ARCH_MVEBU
 	default HW_RANDOM
- 	---help---
+	help
  	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on OMAP16xx, OMAP2/3/4/5, AM33xx/AM43xx
 	  multimedia processors, and Marvell Armada 7k/8k SoCs.
@@ -171,7 +171,7 @@ config HW_RANDOM_OMAP3_ROM
 	tristate "OMAP3 ROM Random Number Generator support"
 	depends on ARCH_OMAP3
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on OMAP34xx processors.
 
@@ -184,7 +184,7 @@ config HW_RANDOM_OCTEON
 	tristate "Octeon Random Number Generator support"
 	depends on CAVIUM_OCTEON_SOC
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Octeon processors.
 
@@ -197,7 +197,7 @@ config HW_RANDOM_PASEMI
 	tristate "PA Semi HW Random Number Generator support"
 	depends on PPC_PASEMI
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on PA Semi PWRficient SoCs.
 
@@ -209,7 +209,7 @@ config HW_RANDOM_PASEMI
 config HW_RANDOM_VIRTIO
 	tristate "VirtIO Random Number Generator support"
 	depends on VIRTIO
-	---help---
+	help
 	  This driver provides kernel-side support for the virtual Random Number
 	  Generator hardware.
 
@@ -220,7 +220,7 @@ config HW_RANDOM_TX4939
 	tristate "TX4939 Random Number Generator support"
 	depends on SOC_TX4939
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on TX4939 SoC.
 
@@ -233,7 +233,7 @@ config HW_RANDOM_MXC_RNGA
 	tristate "Freescale i.MX RNGA Random Number Generator"
 	depends on SOC_IMX31
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Freescale i.MX processors.
 
@@ -247,7 +247,7 @@ config HW_RANDOM_IMX_RNGC
 	depends on HAS_IOMEM && HAVE_CLK
 	depends on SOC_IMX25 || COMPILE_TEST
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator Version C hardware found on some Freescale i.MX
 	  processors. Version B is also supported by this driver.
@@ -261,7 +261,7 @@ config HW_RANDOM_NOMADIK
 	tristate "ST-Ericsson Nomadik Random Number Generator support"
 	depends on ARCH_NOMADIK
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on ST-Ericsson SoCs (8815 and 8500).
 
@@ -274,7 +274,7 @@ config HW_RANDOM_PSERIES
 	tristate "pSeries HW Random Number Generator support"
 	depends on PPC64 && IBMVIO
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on POWER7+ machines and above
 
@@ -287,7 +287,7 @@ config HW_RANDOM_POWERNV
 	tristate "PowerNV Random Number Generator support"
 	depends on PPC_POWERNV
 	default HW_RANDOM
-	---help---
+	help
 	  This is the driver for Random Number Generator hardware found
 	  in POWER7+ and above machines for PowerNV platform.
 
@@ -300,7 +300,7 @@ config HW_RANDOM_HISI
 	tristate "Hisilicon Random Number Generator support"
 	depends on HW_RANDOM && ARCH_HISI
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Hisilicon Hip04 and Hip05 SoC.
 
@@ -325,7 +325,7 @@ config HW_RANDOM_HISI_V2
 config HW_RANDOM_ST
 	tristate "ST Microelectronics HW Random Number Generator support"
 	depends on HW_RANDOM && ARCH_STI
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on STi series of SoCs.
 
@@ -336,7 +336,7 @@ config HW_RANDOM_XGENE
 	tristate "APM X-Gene True Random Number Generator (TRNG) support"
 	depends on HW_RANDOM && ARCH_XGENE
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on APM X-Gene SoC.
 
@@ -363,7 +363,7 @@ config HW_RANDOM_PIC32
 	tristate "Microchip PIC32 Random Number Generator support"
 	depends on HW_RANDOM && MACH_PIC32
 	default y
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on a PIC32.
 
@@ -377,7 +377,7 @@ config HW_RANDOM_MESON
 	depends on HW_RANDOM
 	depends on ARCH_MESON || COMPILE_TEST
 	default y
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Amlogic Meson SoCs.
 
@@ -390,7 +390,7 @@ config HW_RANDOM_CAVIUM
 	tristate "Cavium ThunderX Random Number Generator support"
 	depends on HW_RANDOM && PCI && (ARM64 || (COMPILE_TEST && 64BIT))
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Cavium SoCs.
 
@@ -404,7 +404,7 @@ config HW_RANDOM_MTK
 	depends on HW_RANDOM
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	default y
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Mediatek SoCs.
 
@@ -417,7 +417,7 @@ config HW_RANDOM_S390
 	tristate "S390 True Random Number Generator support"
 	depends on S390
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the True
 	  Random Number Generator available as CPACF extension
 	  on modern s390 hardware platforms.
@@ -431,7 +431,7 @@ config HW_RANDOM_EXYNOS
 	tristate "Samsung Exynos True Random Number Generator support"
 	depends on ARCH_EXYNOS || COMPILE_TEST
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides support for the True Random Number
 	  Generator available in Exynos SoCs.
 
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index aacdeed93320..58b4c573d176 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -9,7 +9,7 @@ menuconfig TCG_TPM
 	imply SECURITYFS
 	select CRYPTO
 	select CRYPTO_HASH_INFO
-	---help---
+	help
 	  If you have a TPM security chip in your system, which
 	  implements the Trusted Computing Group's specification,
 	  say Yes and it will be accessible from within Linux.  For
@@ -31,7 +31,7 @@ config HW_RANDOM_TPM
 	bool "TPM HW Random Number Generator support"
 	depends on TCG_TPM && HW_RANDOM && !(TCG_TPM=y && HW_RANDOM=m)
 	default y
-	---help---
+	help
 	  This setting exposes the TPM's Random Number Generator as a hwrng
 	  device. This allows the kernel to collect randomness from the TPM at
 	  boot, and provides the TPM randomines in /dev/hwrng.
@@ -40,7 +40,7 @@ config HW_RANDOM_TPM
 
 config TCG_TIS_CORE
 	tristate
-	---help---
+	help
 	TCG TIS TPM core driver. It implements the TPM TCG TIS logic and hooks
 	into the TPM kernel APIs. Physical layers will register against it.
 
@@ -48,7 +48,7 @@ config TCG_TIS
 	tristate "TPM Interface Specification 1.2 Interface / TPM 2.0 FIFO Interface"
 	depends on X86 || OF
 	select TCG_TIS_CORE
-	---help---
+	help
 	  If you have a TPM security chip that is compliant with the
 	  TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO
 	  specification (TPM2.0) say Yes and it will be accessible from
@@ -59,7 +59,7 @@ config TCG_TIS_SPI
 	tristate "TPM Interface Specification 1.3 Interface / TPM 2.0 FIFO Interface - (SPI)"
 	depends on SPI
 	select TCG_TIS_CORE
-	---help---
+	help
 	  If you have a TPM security chip which is connected to a regular,
 	  non-tcg SPI master (i.e. most embedded platforms) that is compliant with the
 	  TCG TIS 1.3 TPM specification (TPM1.2) or the TCG PTP FIFO
@@ -77,7 +77,7 @@ config TCG_TIS_SPI_CR50
 config TCG_TIS_I2C_ATMEL
 	tristate "TPM Interface Specification 1.2 Interface (I2C - Atmel)"
 	depends on I2C
-	---help---
+	help
 	  If you have an Atmel I2C TPM security chip say Yes and it will be
 	  accessible from within Linux.
 	  To compile this driver as a module, choose M here; the module will
@@ -86,7 +86,7 @@ config TCG_TIS_I2C_ATMEL
 config TCG_TIS_I2C_INFINEON
 	tristate "TPM Interface Specification 1.2 Interface (I2C - Infineon)"
 	depends on I2C
-	---help---
+	help
 	  If you have a TPM security chip that is compliant with the
 	  TCG TIS 1.2 TPM specification and Infineon's I2C Protocol Stack
 	  Specification 0.20 say Yes and it will be accessible from within
@@ -97,7 +97,7 @@ config TCG_TIS_I2C_INFINEON
 config TCG_TIS_I2C_NUVOTON
 	tristate "TPM Interface Specification 1.2 Interface (I2C - Nuvoton)"
 	depends on I2C
-	---help---
+	help
 	  If you have a TPM security chip with an I2C interface from
 	  Nuvoton Technology Corp. say Yes and it will be accessible
 	  from within Linux.
@@ -107,7 +107,7 @@ config TCG_TIS_I2C_NUVOTON
 config TCG_NSC
 	tristate "National Semiconductor TPM Interface"
 	depends on X86
-	---help---
+	help
 	  If you have a TPM security chip from National Semiconductor 
 	  say Yes and it will be accessible from within Linux.  To 
 	  compile this driver as a module, choose M here; the module 
@@ -116,7 +116,7 @@ config TCG_NSC
 config TCG_ATMEL
 	tristate "Atmel TPM Interface"
 	depends on PPC64 || HAS_IOPORT_MAP
-	---help---
+	help
 	  If you have a TPM security chip from Atmel say Yes and it 
 	  will be accessible from within Linux.  To compile this driver 
 	  as a module, choose M here; the module will be called tpm_atmel.
@@ -124,7 +124,7 @@ config TCG_ATMEL
 config TCG_INFINEON
 	tristate "Infineon Technologies TPM Interface"
 	depends on PNP
-	---help---
+	help
 	  If you have a TPM security chip from Infineon Technologies
 	  (either SLD 9630 TT 1.1 or SLB 9635 TT 1.2) say Yes and it
 	  will be accessible from within Linux.
@@ -136,7 +136,7 @@ config TCG_INFINEON
 config TCG_IBMVTPM
 	tristate "IBM VTPM Interface"
 	depends on PPC_PSERIES
-	---help---
+	help
 	  If you have IBM virtual TPM (VTPM) support say Yes and it
 	  will be accessible from within Linux.  To compile this driver
 	  as a module, choose M here; the module will be called tpm_ibmvtpm.
@@ -145,7 +145,7 @@ config TCG_XEN
 	tristate "XEN TPM Interface"
 	depends on TCG_TPM && XEN
 	select XEN_XENBUS_FRONTEND
-	---help---
+	help
 	  If you want to make TPM support available to a Xen user domain,
 	  say Yes and it will be accessible from within Linux. See
 	  the manpages for xl, xl.conf, and docs/misc/vtpm.txt in
@@ -156,7 +156,7 @@ config TCG_XEN
 config TCG_CRB
 	tristate "TPM 2.0 CRB Interface"
 	depends on ACPI
-	---help---
+	help
 	  If you have a TPM security chip that is compliant with the
 	  TCG CRB 2.0 TPM specification say Yes and it will be accessible
 	  from within Linux.  To compile this driver as a module, choose
@@ -165,7 +165,7 @@ config TCG_CRB
 config TCG_VTPM_PROXY
 	tristate "VTPM Proxy Interface"
 	depends on TCG_TPM
-	---help---
+	help
 	  This driver proxies for an emulated TPM (vTPM) running in userspace.
 	  A device /dev/vtpmx is provided that creates a device pair
 	  /dev/vtpmX and a server-side file descriptor on which the vTPM
diff --git a/drivers/char/tpm/st33zp24/Kconfig b/drivers/char/tpm/st33zp24/Kconfig
index e582145076dc..601c2ae5bfcb 100644
--- a/drivers/char/tpm/st33zp24/Kconfig
+++ b/drivers/char/tpm/st33zp24/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config TCG_TIS_ST33ZP24
 	tristate
-	---help---
+	help
 	  STMicroelectronics ST33ZP24 core driver. It implements the core
 	  TPM1.2 logic and hooks into the TPM kernel APIs. Physical layers will
 	  register against it.
@@ -13,7 +13,7 @@ config TCG_TIS_ST33ZP24_I2C
 	tristate "STMicroelectronics TPM Interface Specification 1.2 Interface (I2C)"
 	depends on I2C
 	select TCG_TIS_ST33ZP24
-	---help---
+	help
 	  This module adds support for the STMicroelectronics TPM security chip
 	  ST33ZP24 with i2c interface.
 	  To compile this driver as a module, choose M here; the module will be
@@ -23,7 +23,7 @@ config TCG_TIS_ST33ZP24_SPI
 	tristate "STMicroelectronics TPM Interface Specification 1.2 Interface (SPI)"
 	depends on SPI
 	select TCG_TIS_ST33ZP24
-	---help---
+	help
 	  This module adds support for the STMicroelectronics TPM security chip
 	  ST33ZP24 with spi interface.
 	  To compile this driver as a module, choose M here; the module will be