diff options
author | Stephen Rothwell <sfr@canb.auug.org.au> | 2009-06-26 11:51:24 +1000 |
---|---|---|
committer | Stephen Rothwell <sfr@canb.auug.org.au> | 2009-06-26 11:51:24 +1000 |
commit | bf09f426409f902c696c7b0bbd216646757e2dcc (patch) | |
tree | ae081ab70502a65a8af2dae9d1fd7e78486caa0b /drivers/dma | |
parent | 9b415b4090cdb19ae35f347be816f8661dc7d822 (diff) | |
parent | 8717d20e6f96668dc9404ab29d8d5886412e9327 (diff) |
Merge commit 'async_tx/next'
Diffstat (limited to 'drivers/dma')
-rw-r--r-- | drivers/dma/Kconfig | 4 | ||||
-rw-r--r-- | drivers/dma/fsldma.c | 287 | ||||
-rw-r--r-- | drivers/dma/fsldma.h | 4 |
3 files changed, 272 insertions, 23 deletions
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 070357aaedbc..d956ce90c9ea 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -4,7 +4,7 @@ menuconfig DMADEVICES bool "DMA Engine support" - depends on !HIGHMEM64G && HAS_DMA + depends on HAS_DMA help DMA engines can do asynchronous data transfers without involving the host CPU. Currently, this framework can be @@ -108,7 +108,7 @@ config NET_DMA config ASYNC_TX_DMA bool "Async_tx: Offload support for the async_tx api" - depends on DMA_ENGINE + depends on DMA_ENGINE && !HIGHMEM64G help This allows the async_tx api to take advantage of offload engines for memcpy, memset, xor, and raid6 p+q operations. If your platform has diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index f18d1bde0439..6f769a7cb8e9 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -12,6 +12,11 @@ * also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc. * The support for MPC8349 DMA contorller is also added. * + * This driver instructs the DMA controller to issue the PCI Read Multiple + * command for PCI read operations, instead of using the default PCI Read Line + * command. Please be aware that this setting may result in read pre-fetching + * on some platforms. + * * This is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -29,6 +34,7 @@ #include <linux/dmapool.h> #include <linux/of_platform.h> +#include <asm/fsldma.h> #include "fsldma.h" static void dma_init(struct fsl_dma_chan *fsl_chan) @@ -49,9 +55,10 @@ static void dma_init(struct fsl_dma_chan *fsl_chan) case FSL_DMA_IP_83XX: /* Set the channel to below modes: * EOTIE - End-of-transfer interrupt enable + * PRC_RM - PCI read multiple */ - DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE, - 32); + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE + | FSL_DMA_MR_PRC_RM, 32); break; } @@ -141,10 +148,11 @@ static void dma_start(struct fsl_dma_chan *fsl_chan) if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) { DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32); mr_set |= FSL_DMA_MR_EMP_EN; - } else + } else if ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) { DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~FSL_DMA_MR_EMP_EN, 32); + } if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT) mr_set |= FSL_DMA_MR_EMS_EN; @@ -273,28 +281,40 @@ static void fsl_chan_set_dest_loop_size(struct fsl_dma_chan *fsl_chan, int size) } /** - * fsl_chan_toggle_ext_pause - Toggle channel external pause status + * fsl_chan_set_request_count - Set DMA Request Count for external control * @fsl_chan : Freescale DMA channel - * @size : Pause control size, 0 for disable external pause control. - * The maximum is 1024. + * @size : Number of bytes to transfer in a single request + * + * The Freescale DMA channel can be controlled by the external signal DREQ#. + * The DMA request count is how many bytes are allowed to transfer before + * pausing the channel, after which a new assertion of DREQ# resumes channel + * operation. * - * The Freescale DMA channel can be controlled by the external - * signal DREQ#. The pause control size is how many bytes are allowed - * to transfer before pausing the channel, after which a new assertion - * of DREQ# resumes channel operation. + * A size of 0 disables external pause control. The maximum size is 1024. */ -static void fsl_chan_toggle_ext_pause(struct fsl_dma_chan *fsl_chan, int size) +static void fsl_chan_set_request_count(struct fsl_dma_chan *fsl_chan, int size) { - if (size > 1024) - return; + BUG_ON(size > 1024); + DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, + DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) + | ((__ilog2(size) << 24) & 0x0f000000), + 32); +} - if (size) { - DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, - DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) - | ((__ilog2(size) << 24) & 0x0f000000), - 32); +/** + * fsl_chan_toggle_ext_pause - Toggle channel external pause status + * @fsl_chan : Freescale DMA channel + * @enable : 0 is disabled, 1 is enabled. + * + * The Freescale DMA channel can be controlled by the external signal DREQ#. + * The DMA Request Count feature should be used in addition to this feature + * to set the number of bytes to transfer before pausing the channel. + */ +static void fsl_chan_toggle_ext_pause(struct fsl_dma_chan *fsl_chan, int enable) +{ + if (enable) fsl_chan->feature |= FSL_DMA_CHAN_PAUSE_EXT; - } else + else fsl_chan->feature &= ~FSL_DMA_CHAN_PAUSE_EXT; } @@ -531,6 +551,229 @@ fail: } /** + * fsl_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction + * @chan: DMA channel + * @sgl: scatterlist to transfer to/from + * @sg_len: number of entries in @scatterlist + * @direction: DMA direction + * @flags: DMAEngine flags + * + * Prepare a set of descriptors for a DMA_SLAVE transaction. Following the + * DMA_SLAVE API, this gets the device-specific information from the + * chan->private variable. + */ +static struct dma_async_tx_descriptor *fsl_dma_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, + enum dma_data_direction direction, unsigned long flags) +{ + struct fsl_dma_chan *fsl_chan; + struct fsl_desc_sw *first = NULL, *prev = NULL, *new = NULL; + struct fsl_dma_slave *slave; + struct list_head *tx_list; + size_t copy; + + int i; + struct scatterlist *sg; + size_t sg_used; + size_t hw_used; + struct fsl_dma_hw_addr *hw; + dma_addr_t dma_dst, dma_src; + + if (!chan) + return NULL; + + if (!chan->private) + return NULL; + + fsl_chan = to_fsl_chan(chan); + slave = chan->private; + + if (list_empty(&slave->addresses)) + return NULL; + + hw = list_first_entry(&slave->addresses, struct fsl_dma_hw_addr, entry); + hw_used = 0; + + /* + * Build the hardware transaction to copy from the scatterlist to + * the hardware, or from the hardware to the scatterlist + * + * If you are copying from the hardware to the scatterlist and it + * takes two hardware entries to fill an entire page, then both + * hardware entries will be coalesced into the same page + * + * If you are copying from the scatterlist to the hardware and a + * single page can fill two hardware entries, then the data will + * be read out of the page into the first hardware entry, and so on + */ + for_each_sg(sgl, sg, sg_len, i) { + sg_used = 0; + + /* Loop until the entire scatterlist entry is used */ + while (sg_used < sg_dma_len(sg)) { + + /* + * If we've used up the current hardware address/length + * pair, we need to load a new one + * + * This is done in a while loop so that descriptors with + * length == 0 will be skipped + */ + while (hw_used >= hw->length) { + + /* + * If the current hardware entry is the last + * entry in the list, we're finished + */ + if (list_is_last(&hw->entry, &slave->addresses)) + goto finished; + + /* Get the next hardware address/length pair */ + hw = list_entry(hw->entry.next, + struct fsl_dma_hw_addr, entry); + hw_used = 0; + } + + /* Allocate the link descriptor from DMA pool */ + new = fsl_dma_alloc_descriptor(fsl_chan); + if (!new) { + dev_err(fsl_chan->dev, "No free memory for " + "link descriptor\n"); + goto fail; + } +#ifdef FSL_DMA_LD_DEBUG + dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new); +#endif + + /* + * Calculate the maximum number of bytes to transfer, + * making sure it is less than the DMA controller limit + */ + copy = min_t(size_t, sg_dma_len(sg) - sg_used, + hw->length - hw_used); + copy = min_t(size_t, copy, FSL_DMA_BCR_MAX_CNT); + + /* + * DMA_FROM_DEVICE + * from the hardware to the scatterlist + * + * DMA_TO_DEVICE + * from the scatterlist to the hardware + */ + if (direction == DMA_FROM_DEVICE) { + dma_src = hw->address + hw_used; + dma_dst = sg_dma_address(sg) + sg_used; + } else { + dma_src = sg_dma_address(sg) + sg_used; + dma_dst = hw->address + hw_used; + } + + /* Fill in the descriptor */ + set_desc_cnt(fsl_chan, &new->hw, copy); + set_desc_src(fsl_chan, &new->hw, dma_src); + set_desc_dest(fsl_chan, &new->hw, dma_dst); + + /* + * If this is not the first descriptor, chain the + * current descriptor after the previous descriptor + */ + if (!first) { + first = new; + } else { + set_desc_next(fsl_chan, &prev->hw, + new->async_tx.phys); + } + + new->async_tx.cookie = 0; + async_tx_ack(&new->async_tx); + + prev = new; + sg_used += copy; + hw_used += copy; + + /* Insert the link descriptor into the LD ring */ + list_add_tail(&new->node, &first->async_tx.tx_list); + } + } + +finished: + + /* All of the hardware address/length pairs had length == 0 */ + if (!first || !new) + return NULL; + + new->async_tx.flags = flags; + new->async_tx.cookie = -EBUSY; + + /* Set End-of-link to the last link descriptor of new list */ + set_ld_eol(fsl_chan, new); + + /* Enable extra controller features */ + if (fsl_chan->set_src_loop_size) + fsl_chan->set_src_loop_size(fsl_chan, slave->src_loop_size); + + if (fsl_chan->set_dest_loop_size) + fsl_chan->set_dest_loop_size(fsl_chan, slave->dst_loop_size); + + if (fsl_chan->toggle_ext_start) + fsl_chan->toggle_ext_start(fsl_chan, slave->external_start); + + if (fsl_chan->toggle_ext_pause) + fsl_chan->toggle_ext_pause(fsl_chan, slave->external_pause); + + if (fsl_chan->set_request_count) + fsl_chan->set_request_count(fsl_chan, slave->request_count); + + return &first->async_tx; + +fail: + /* If first was not set, then we failed to allocate the very first + * descriptor, and we're done */ + if (!first) + return NULL; + + /* + * First is set, so all of the descriptors we allocated have been added + * to first->async_tx.tx_list, INCLUDING "first" itself. Therefore we + * must traverse the list backwards freeing each descriptor in turn + * + * We're re-using variables for the loop, oh well + */ + tx_list = &first->async_tx.tx_list; + list_for_each_entry_safe_reverse(new, prev, tx_list, node) { + list_del_init(&new->node); + dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys); + } + + return NULL; +} + +static void fsl_dma_device_terminate_all(struct dma_chan *chan) +{ + struct fsl_dma_chan *fsl_chan; + struct fsl_desc_sw *desc, *tmp; + unsigned long flags; + + if (!chan) + return; + + fsl_chan = to_fsl_chan(chan); + + /* Halt the DMA engine */ + dma_halt(fsl_chan); + + spin_lock_irqsave(&fsl_chan->desc_lock, flags); + + /* Remove and free all of the descriptors in the LD queue */ + list_for_each_entry_safe(desc, tmp, &fsl_chan->ld_queue, node) { + list_del(&desc->node); + dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys); + } + + spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); +} + +/** * fsl_dma_update_completed_cookie - Update the completed cookie. * @fsl_chan : Freescale DMA channel */ @@ -871,11 +1114,12 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev, switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) { case FSL_DMA_IP_85XX: - new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start; new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause; case FSL_DMA_IP_83XX: + new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start; new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size; new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size; + new_fsl_chan->set_request_count = fsl_chan_set_request_count; } spin_lock_init(&new_fsl_chan->desc_lock); @@ -955,12 +1199,15 @@ static int __devinit of_fsl_dma_probe(struct of_device *dev, dma_cap_set(DMA_MEMCPY, fdev->common.cap_mask); dma_cap_set(DMA_INTERRUPT, fdev->common.cap_mask); + dma_cap_set(DMA_SLAVE, fdev->common.cap_mask); fdev->common.device_alloc_chan_resources = fsl_dma_alloc_chan_resources; fdev->common.device_free_chan_resources = fsl_dma_free_chan_resources; fdev->common.device_prep_dma_interrupt = fsl_dma_prep_interrupt; fdev->common.device_prep_dma_memcpy = fsl_dma_prep_memcpy; fdev->common.device_is_tx_complete = fsl_dma_is_complete; fdev->common.device_issue_pending = fsl_dma_memcpy_issue_pending; + fdev->common.device_prep_slave_sg = fsl_dma_prep_slave_sg; + fdev->common.device_terminate_all = fsl_dma_device_terminate_all; fdev->common.dev = &dev->dev; fdev->irq = irq_of_parse_and_map(dev->node, 0); diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h index 4f21a512d848..462208d381df 100644 --- a/drivers/dma/fsldma.h +++ b/drivers/dma/fsldma.h @@ -38,6 +38,7 @@ /* Special MR definition for MPC8349 */ #define FSL_DMA_MR_EOTIE 0x00000080 +#define FSL_DMA_MR_PRC_RM 0x00000800 #define FSL_DMA_SR_CH 0x00000020 #define FSL_DMA_SR_PE 0x00000010 @@ -142,10 +143,11 @@ struct fsl_dma_chan { struct tasklet_struct tasklet; u32 feature; - void (*toggle_ext_pause)(struct fsl_dma_chan *fsl_chan, int size); + void (*toggle_ext_pause)(struct fsl_dma_chan *fsl_chan, int enable); void (*toggle_ext_start)(struct fsl_dma_chan *fsl_chan, int enable); void (*set_src_loop_size)(struct fsl_dma_chan *fsl_chan, int size); void (*set_dest_loop_size)(struct fsl_dma_chan *fsl_chan, int size); + void (*set_request_count)(struct fsl_dma_chan *fsl_chan, int size); }; #define to_fsl_chan(chan) container_of(chan, struct fsl_dma_chan, common) |