summaryrefslogtreecommitdiff
path: root/drivers/hid
diff options
context:
space:
mode:
authorHans de Goede <hdegoede@redhat.com>2020-10-26 16:46:06 +0100
committerJiri Kosina <jkosina@suse.cz>2020-10-29 12:48:55 +0100
commit5c7e02a896689407555b3a10d6ed87369c70916e (patch)
tree75c4f84238929741dc58bb1f81ebcdf4f34ee7ed /drivers/hid
parent1811977cb11354aef8cbd13e35ff50db716728a4 (diff)
HID: i2c-hid: Put ACPI enumerated devices in D3 on shutdown
The i2c-hid driver would quietly fail to probe the i2c-hid sensor-hub with an ACPI device-id of SMO91D0 every other boot. Specifically, the i2c_smbus_read_byte() "Make sure there is something at this address" check would fail every other boot. It seems that the BIOS does not properly reset/power-cycle the device leaving it in a confused state where it refuses to respond to i2c-xfers. On boots where probing the device failed, the driver-core puts the device in D3 after the probe-failure, which causes the probe to succeed the next boot. Putting the device in D3 from the shutdown-handler fixes the sensors not working every other boot. This has been tested on both a Lenovo Miix 2-10 and a Dell Venue 8 Pro 5830 both of which use an i2c-hid sensor-hub with an ACPI id of SMO91D0. Note that it is safe to call acpi_device_set_power() with a NULL pointer as first argument, so on none ACPI enumerated devices this change is a no-op. Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Diffstat (limited to 'drivers/hid')
-rw-r--r--drivers/hid/i2c-hid/i2c-hid-core.c9
1 files changed, 9 insertions, 0 deletions
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 786e3e9af1c9..aeff1ffb0c8b 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -943,6 +943,11 @@ static void i2c_hid_acpi_enable_wakeup(struct device *dev)
}
}
+static void i2c_hid_acpi_shutdown(struct device *dev)
+{
+ acpi_device_set_power(ACPI_COMPANION(dev), ACPI_STATE_D3_COLD);
+}
+
static const struct acpi_device_id i2c_hid_acpi_match[] = {
{"ACPI0C50", 0 },
{"PNP0C50", 0 },
@@ -959,6 +964,8 @@ static inline int i2c_hid_acpi_pdata(struct i2c_client *client,
static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {}
static inline void i2c_hid_acpi_enable_wakeup(struct device *dev) {}
+
+static inline void i2c_hid_acpi_shutdown(struct device *dev) {}
#endif
#ifdef CONFIG_OF
@@ -1175,6 +1182,8 @@ static void i2c_hid_shutdown(struct i2c_client *client)
i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
free_irq(client->irq, ihid);
+
+ i2c_hid_acpi_shutdown(&client->dev);
}
#ifdef CONFIG_PM_SLEEP