Merge branch 'quilt/i2c'

4 files changed, 75 insertions, 31 deletions

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 9da5b05cdb52..878299cd0ef8 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -138,6 +138,17 @@ static struct pci_dev *I801_dev;
 #define FEATURE_I2C_BLOCK_READ	(1 << 3)
 static unsigned int i801_features;
 
+static const char *i801_feature_names[] = {
+	"SMBus PEC",
+	"Block buffer",
+	"Block process call",
+	"I2C block read",
+};
+
+static unsigned int disable_features;
+module_param(disable_features, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable_features, "Disable selected driver features");
+
 /* Make sure the SMBus host is ready to start transmitting.
    Return 0 if it is, -EBUSY if it is not. */
 static int i801_check_pre(void)
@@ -416,9 +427,11 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 		data->block[0] = 32;	/* max for SMBus block reads */
 	}
 
+	/* Experience has shown that the block buffer can only be used for
+	   SMBus (not I2C) block transactions, even though the datasheet
+	   doesn't mention this limitation. */
 	if ((i801_features & FEATURE_BLOCK_BUFFER)
-	 && !(command == I2C_SMBUS_I2C_BLOCK_DATA
-	      && read_write == I2C_SMBUS_READ)
+	 && command != I2C_SMBUS_I2C_BLOCK_DATA
 	 && i801_set_block_buffer_mode() == 0)
 		result = i801_block_transaction_by_block(data, read_write,
 							 hwpec);
@@ -690,7 +703,7 @@ static void __devinit dmi_check_onboard_devices(const struct dmi_header *dm,
 static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	unsigned char temp;
-	int err;
+	int err, i;
 #if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
 	const char *vendor;
 #endif
@@ -698,26 +711,28 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
 	I801_dev = dev;
 	i801_features = 0;
 	switch (dev->device) {
-	case PCI_DEVICE_ID_INTEL_82801EB_3:
-	case PCI_DEVICE_ID_INTEL_ESB_4:
-	case PCI_DEVICE_ID_INTEL_ICH6_16:
-	case PCI_DEVICE_ID_INTEL_ICH7_17:
-	case PCI_DEVICE_ID_INTEL_ESB2_17:
-	case PCI_DEVICE_ID_INTEL_ICH8_5:
-	case PCI_DEVICE_ID_INTEL_ICH9_6:
-	case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
-	case PCI_DEVICE_ID_INTEL_ICH10_4:
-	case PCI_DEVICE_ID_INTEL_ICH10_5:
-	case PCI_DEVICE_ID_INTEL_PCH_SMBUS:
-	case PCI_DEVICE_ID_INTEL_CPT_SMBUS:
+	default:
 		i801_features |= FEATURE_I2C_BLOCK_READ;
 		/* fall through */
 	case PCI_DEVICE_ID_INTEL_82801DB_3:
 		i801_features |= FEATURE_SMBUS_PEC;
 		i801_features |= FEATURE_BLOCK_BUFFER;
+		/* fall through */
+	case PCI_DEVICE_ID_INTEL_82801CA_3:
+	case PCI_DEVICE_ID_INTEL_82801BA_2:
+	case PCI_DEVICE_ID_INTEL_82801AB_3:
+	case PCI_DEVICE_ID_INTEL_82801AA_3:
 		break;
 	}
 
+	/* Disable features on user request */
+	for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
+		if (i801_features & disable_features & (1 << i))
+			dev_notice(&dev->dev, "%s disabled by user\n",
+				   i801_feature_names[i]);
+	}
+	i801_features &= ~disable_features;
+
 	err = pci_enable_device(dev);
 	if (err) {
 		dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 1c440a70ec61..b289ec99eeba 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -122,9 +122,14 @@ static s32 i2c_powermac_smbus_xfer(	struct i2c_adapter*	adap,
 
 	rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len);
 	if (rc) {
-		dev_err(&adap->dev,
-			"I2C transfer at 0x%02x failed, size %d, err %d\n",
-			addrdir >> 1, size, rc);
+		if (rc == -ENXIO)
+			dev_dbg(&adap->dev,
+				"I2C transfer at 0x%02x failed, size %d, "
+				"err %d\n", addrdir >> 1, size, rc);
+		else
+			dev_err(&adap->dev,
+				"I2C transfer at 0x%02x failed, size %d, "
+				"err %d\n", addrdir >> 1, size, rc);
 		goto bail;
 	}
 
@@ -175,10 +180,16 @@ static int i2c_powermac_master_xfer(	struct i2c_adapter *adap,
 		goto bail;
 	}
 	rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
-	if (rc < 0)
-		dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
-			addrdir & 1 ? "read from" : "write to", addrdir >> 1,
-			rc);
+	if (rc < 0) {
+		if (rc == -ENXIO)
+			dev_dbg(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+				addrdir & 1 ? "read from" : "write to",
+				addrdir >> 1, rc);
+		else
+			dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+				addrdir & 1 ? "read from" : "write to",
+				addrdir >> 1, rc);
+	}
  bail:
 	pmac_i2c_close(bus);
 	return rc < 0 ? rc : 1;
diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
index 365e0becaf12..d3f32ca8157f 100644
--- a/drivers/i2c/busses/i2c-scmi.c
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -33,6 +33,7 @@ struct acpi_smbus_cmi {
 	u8 cap_info:1;
 	u8 cap_read:1;
 	u8 cap_write:1;
+	struct smbus_methods_t *methods;
 };
 
 static const struct smbus_methods_t smbus_methods = {
@@ -41,10 +42,21 @@ static const struct smbus_methods_t smbus_methods = {
 	.mt_sbw  = "_SBW",
 };
 
+/* Some IBM BIOSes omit the leading underscore */
+static const struct smbus_methods_t ibm_smbus_methods = {
+	.mt_info = "SBI_",
+	.mt_sbr  = "SBR_",
+	.mt_sbw  = "SBW_",
+};
+
+/* The define below will go away in the final version */
+#define ACPI_SMBUS_IBM_HID "SMBUSIBM"
 static const struct acpi_device_id acpi_smbus_cmi_ids[] = {
-	{"SMBUS01", 0},
+	{"SMBUS01", (kernel_ulong_t)&smbus_methods},
+	{ACPI_SMBUS_IBM_HID, (kernel_ulong_t)&ibm_smbus_methods},
 	{"", 0}
 };
+MODULE_DEVICE_TABLE(acpi, acpi_smbus_cmi_ids);
 
 #define ACPI_SMBUS_STATUS_OK			0x00
 #define ACPI_SMBUS_STATUS_FAIL			0x07
@@ -150,11 +162,11 @@ acpi_smbus_cmi_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
 
 	if (read_write == I2C_SMBUS_READ) {
 		protocol |= ACPI_SMBUS_PRTCL_READ;
-		method = smbus_methods.mt_sbr;
+		method = smbus_cmi->methods->mt_sbr;
 		input.count = 3;
 	} else {
 		protocol |= ACPI_SMBUS_PRTCL_WRITE;
-		method = smbus_methods.mt_sbw;
+		method = smbus_cmi->methods->mt_sbw;
 		input.count = 5;
 	}
 
@@ -290,13 +302,13 @@ static int acpi_smbus_cmi_add_cap(struct acpi_smbus_cmi *smbus_cmi,
 	union acpi_object *obj;
 	acpi_status status;
 
-	if (!strcmp(name, smbus_methods.mt_info)) {
+	if (!strcmp(name, smbus_cmi->methods->mt_info)) {
 		status = acpi_evaluate_object(smbus_cmi->handle,
-					smbus_methods.mt_info,
+					smbus_cmi->methods->mt_info,
 					NULL, &buffer);
 		if (ACPI_FAILURE(status)) {
 			ACPI_ERROR((AE_INFO, "Evaluating %s: %i",
-				   smbus_methods.mt_info, status));
+				   smbus_cmi->methods->mt_info, status));
 			return -EIO;
 		}
 
@@ -319,9 +331,9 @@ static int acpi_smbus_cmi_add_cap(struct acpi_smbus_cmi *smbus_cmi,
 
 		kfree(buffer.pointer);
 		smbus_cmi->cap_info = 1;
-	} else if (!strcmp(name, smbus_methods.mt_sbr))
+	} else if (!strcmp(name, smbus_cmi->methods->mt_sbr))
 		smbus_cmi->cap_read = 1;
-	else if (!strcmp(name, smbus_methods.mt_sbw))
+	else if (!strcmp(name, smbus_cmi->methods->mt_sbw))
 		smbus_cmi->cap_write = 1;
 	else
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported CMI method: %s\n",
@@ -349,6 +361,7 @@ static acpi_status acpi_smbus_cmi_query_methods(acpi_handle handle, u32 level,
 static int acpi_smbus_cmi_add(struct acpi_device *device)
 {
 	struct acpi_smbus_cmi *smbus_cmi;
+	const struct acpi_device_id *id;
 
 	smbus_cmi = kzalloc(sizeof(struct acpi_smbus_cmi), GFP_KERNEL);
 	if (!smbus_cmi)
@@ -362,6 +375,11 @@ static int acpi_smbus_cmi_add(struct acpi_device *device)
 	smbus_cmi->cap_read = 0;
 	smbus_cmi->cap_write = 0;
 
+	for (id = acpi_smbus_cmi_ids; id->id[0]; id++)
+		if (!strcmp(id->id, acpi_device_hid(device)))
+			smbus_cmi->methods =
+				(struct smbus_methods_t *) id->driver_data;
+
 	acpi_walk_namespace(ACPI_TYPE_METHOD, smbus_cmi->handle, 1,
 			    acpi_smbus_cmi_query_methods, NULL, smbus_cmi, NULL);
 
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index cf994bd01d9c..1a9c1055f78b 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -551,7 +551,7 @@ static int __init scx200_create_isa(const char *text, unsigned long base,
  * the name and the BAR where the I/O address resource is located.  ISA
  * devices are flagged with a bar value of -1 */
 
-static struct pci_device_id scx200_pci[] = {
+static const struct pci_device_id scx200_pci[] __initconst = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE),
 	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE),