summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
authorWolfram Sang <wsa+renesas@sang-engineering.com>2015-11-19 16:56:46 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2018-06-06 16:46:22 +0200
commitde427f7ee8255d1791e1b1c33e83a87035a778b4 (patch)
tree74f018453f28552b91f945c843e2afce6049422c /drivers/i2c
parentd088d20380b04e4dcc5f3531387c6df13da86e8b (diff)
i2c: rcar: init new messages in irq
commit cc21d0b4b62e41e5013d763adade5ea4462c33a4 upstream. Setting up new messages was done in process context while handling a message was in interrupt context. Because of the HW design, this IP core is sensitive to timing, so the context switches were too expensive. Move this setup to interrupt context as well. In my test setup, this fixed the occasional 'data byte sent twice' issue which a number of people have seen. It also fixes to send REP_START after a read message which was wrongly send as a STOP + START sequence before. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-rcar.c90
1 files changed, 43 insertions, 47 deletions
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 7a4d8d234554..44662e25b24a 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -267,10 +267,17 @@ static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND);
}
+static void rcar_i2c_next_msg(struct rcar_i2c_priv *priv)
+{
+ priv->msg++;
+ priv->msgs_left--;
+ rcar_i2c_prepare_msg(priv);
+}
+
/*
* interrupt functions
*/
-static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
+static void rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
{
struct i2c_msg *msg = priv->msg;
@@ -280,7 +287,7 @@ static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
* Do nothing
*/
if (!(msr & MDE))
- return 0;
+ return;
/*
* If address transfer phase finished,
@@ -309,29 +316,23 @@ static int rcar_i2c_irq_send(struct rcar_i2c_priv *priv, u32 msr)
* [ICRXTX] -> [SHIFT] -> [I2C bus]
*/
- if (priv->flags & ID_LAST_MSG)
+ if (priv->flags & ID_LAST_MSG) {
/*
* If current msg is the _LAST_ msg,
* prepare stop condition here.
* ID_DONE will be set on STOP irq.
*/
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
- else
- /*
- * If current msg is _NOT_ last msg,
- * it doesn't call stop phase.
- * thus, there is no STOP irq.
- * return ID_DONE here.
- */
- return ID_DONE;
+ } else {
+ rcar_i2c_next_msg(priv);
+ return;
+ }
}
rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_SEND);
-
- return 0;
}
-static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
+static void rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
{
struct i2c_msg *msg = priv->msg;
@@ -341,7 +342,7 @@ static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
* Do nothing
*/
if (!(msr & MDR))
- return 0;
+ return;
if (msr & MAT) {
/*
@@ -367,9 +368,10 @@ static int rcar_i2c_irq_recv(struct rcar_i2c_priv *priv, u32 msr)
else
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_DATA);
- rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_RECV);
-
- return 0;
+ if (priv->pos == msg->len && !(priv->flags & ID_LAST_MSG))
+ rcar_i2c_next_msg(priv);
+ else
+ rcar_i2c_write(priv, ICMSR, RCAR_IRQ_ACK_RECV);
}
static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv)
@@ -462,14 +464,15 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
/* Stop */
if (msr & MST) {
+ priv->msgs_left--; /* The last message also made it */
rcar_i2c_flags_set(priv, ID_DONE);
goto out;
}
if (rcar_i2c_is_recv(priv))
- rcar_i2c_flags_set(priv, rcar_i2c_irq_recv(priv, msr));
+ rcar_i2c_irq_recv(priv, msr);
else
- rcar_i2c_flags_set(priv, rcar_i2c_irq_send(priv, msr));
+ rcar_i2c_irq_send(priv, msr);
out:
if (rcar_i2c_flags_has(priv, ID_DONE)) {
@@ -501,35 +504,28 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
/* This HW can't send STOP after address phase */
if (msgs[i].len == 0) {
ret = -EOPNOTSUPP;
- break;
- }
-
- /* init each data */
- priv->msg = &msgs[i];
- priv->msgs_left = num - i;
-
- rcar_i2c_prepare_msg(priv);
-
- time_left = wait_event_timeout(priv->wait,
- rcar_i2c_flags_has(priv, ID_DONE),
- adap->timeout);
- if (!time_left) {
- rcar_i2c_init(priv);
- ret = -ETIMEDOUT;
- break;
- }
-
- if (rcar_i2c_flags_has(priv, ID_NACK)) {
- ret = -ENXIO;
- break;
- }
-
- if (rcar_i2c_flags_has(priv, ID_ARBLOST)) {
- ret = -EAGAIN;
- break;
+ goto out;
}
+ }
- ret = i + 1; /* The number of transfer */
+ /* init data */
+ priv->msg = msgs;
+ priv->msgs_left = num;
+
+ rcar_i2c_prepare_msg(priv);
+
+ time_left = wait_event_timeout(priv->wait,
+ rcar_i2c_flags_has(priv, ID_DONE),
+ num * adap->timeout);
+ if (!time_left) {
+ rcar_i2c_init(priv);
+ ret = -ETIMEDOUT;
+ } else if (rcar_i2c_flags_has(priv, ID_NACK)) {
+ ret = -ENXIO;
+ } else if (rcar_i2c_flags_has(priv, ID_ARBLOST)) {
+ ret = -EAGAIN;
+ } else {
+ ret = num - priv->msgs_left; /* The number of transfer */
}
out:
pm_runtime_put(dev);