[SCSI] fusion SAS support (mptsas driver) updates

Summary of Changes:
* splitting mpt_interrupt per Christophs suggestion
about a month ago
* rename ScsiCfgData to SpiCfgData structure,
then move all the raid related info into
new structure called RaidCfgData.  This is
done because SAS supports RAID, as well as SPI,
so the raid stuff should be seperate.
* incorrect timeout calculation for cntdn
inside WaitForDoorbellAck and WaitForDoortbellInt
* add support for interpreting SAS Log Info
* Increase Event Log Size from 0xA to 0x32
* Fix bug in mptsas/mptfc/mptspi - when controller
has Initiator Mode Disabled, and only running in
TargetMode, the mptctl would panic when loading.
The fix is to return 0, instead of -ENODEV, in
SCSI LLD respective probe routines
* Fix bug in mptlan.c - driver will panic if
there is host reset, due to dev being set to
zero in mpt_lan_ioc_reset
* Fix's for SPI - Echo Buffer
* Several fix's in mptscsih_io_done - FCP Response
info, RESIDUAL_MISMATCH, Data Underrun, etc.
* Cleanup Error Handling - EH handlers,
mptscsih_flush_cmds, and zeroing out ScsiLookup
from mptscsih_qcmd
* Cleanup asyn event handling from
mptscsih -> mptscsih_event_process.  Also
added support for SAS Persistent Table Full,
an asyn event

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 233 insertions, 214 deletions

diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 58b5fdee009a..8dd25aac5355 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -93,8 +93,9 @@ typedef struct _BIG_SENSE_BUF {
 
 #define MPT_ICFLAG_BUF_CAP	0x01	/* ReadBuffer Read Capacity format */
 #define MPT_ICFLAG_ECHO		0x02	/* ReadBuffer Echo buffer format */
-#define MPT_ICFLAG_PHYS_DISK	0x04	/* Any SCSI IO but do Phys Disk Format */
-#define MPT_ICFLAG_TAGGED_CMD	0x08	/* Do tagged IO */
+#define MPT_ICFLAG_EBOS		0x04	/* ReadBuffer Echo buffer has EBOS */
+#define MPT_ICFLAG_PHYS_DISK	0x08	/* Any SCSI IO but do Phys Disk Format */
+#define MPT_ICFLAG_TAGGED_CMD	0x10	/* Do tagged IO */
 #define MPT_ICFLAG_DID_RESET	0x20	/* Bus Reset occurred with this command */
 #define MPT_ICFLAG_RESERVED	0x40	/* Reserved has been issued */
 
@@ -159,6 +160,8 @@ int		mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR
 static int	mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
 static int	mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum);
 
+static struct work_struct   mptscsih_persistTask;
+
 #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
 static int	mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io);
 static void	mptscsih_domainValidation(void *hd);
@@ -167,6 +170,7 @@ static void	mptscsih_qas_check(MPT_SCSI_HOST *hd, int id);
 static int	mptscsih_doDv(MPT_SCSI_HOST *hd, int channel, int target);
 static void	mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage);
 static void	mptscsih_fillbuf(char *buffer, int size, int index, int width);
+static void	mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id);
 #endif
 
 void 		mptscsih_remove(struct pci_dev *);
@@ -606,11 +610,24 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 		xfer_cnt = le32_to_cpu(pScsiReply->TransferCount);
 		sc->resid = sc->request_bufflen - xfer_cnt;
 
+		/*
+		 *  if we get a data underrun indication, yet no data was
+		 *  transferred and the SCSI status indicates that the
+		 *  command was never started, change the data underrun
+		 *  to success
+		 */
+		if (status == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
+		    (scsi_status == MPI_SCSI_STATUS_BUSY ||
+		     scsi_status == MPI_SCSI_STATUS_RESERVATION_CONFLICT ||
+		     scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)) {
+			status = MPI_IOCSTATUS_SUCCESS;
+		}
+
 		dreplyprintk((KERN_NOTICE "Reply ha=%d id=%d lun=%d:\n"
 			"IOCStatus=%04xh SCSIState=%02xh SCSIStatus=%02xh\n"
 			"resid=%d bufflen=%d xfer_cnt=%d\n",
 			ioc->id, pScsiReq->TargetID, pScsiReq->LUN[1],
-			status, scsi_state, scsi_status, sc->resid, 
+			status, scsi_state, scsi_status, sc->resid,
 			sc->request_bufflen, xfer_cnt));
 
 		if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)
@@ -619,8 +636,11 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 		/*
 		 *  Look for + dump FCP ResponseInfo[]!
 		 */
-		if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID) {
-			printk(KERN_NOTICE "  FCP_ResponseInfo=%08xh\n",
+		if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
+		    pScsiReply->ResponseInfo) {
+			printk(KERN_NOTICE "ha=%d id=%d lun=%d: "
+			"FCP_ResponseInfo=%08xh\n",
+			ioc->id, pScsiReq->TargetID, pScsiReq->LUN[1],
 			le32_to_cpu(pScsiReply->ResponseInfo));
 		}
 
@@ -661,23 +681,13 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 			break;
 
 		case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:	/* 0x0049 */
-			if ( xfer_cnt >= sc->underflow ) {
-				/* Sufficient data transfer occurred */
+			sc->resid = sc->request_bufflen - xfer_cnt;
+			if((xfer_cnt==0)||(sc->underflow > xfer_cnt))
+				sc->result=DID_SOFT_ERROR << 16;
+			else /* Sufficient data transfer occurred */
 				sc->result = (DID_OK << 16) | scsi_status;
-			} else if ( xfer_cnt == 0 ) {
-				/* A CRC Error causes this condition; retry */
-				sc->result = (DRIVER_SENSE << 24) | (DID_OK << 16) |
-					(CHECK_CONDITION << 1);
-				sc->sense_buffer[0] = 0x70;
-				sc->sense_buffer[2] = NO_SENSE;
-				sc->sense_buffer[12] = 0;
-				sc->sense_buffer[13] = 0;
-			} else {
-				sc->result = DID_SOFT_ERROR << 16;
-			}
-			dreplyprintk((KERN_NOTICE
-			    "RESIDUAL_MISMATCH: result=%x on id=%d\n",
-			    sc->result, sc->device->id));
+			dreplyprintk((KERN_NOTICE 
+			    "RESIDUAL_MISMATCH: result=%x on id=%d\n", sc->result, sc->device->id));
 			break;
 
 		case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:		/* 0x0045 */
@@ -692,7 +702,10 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 				;
 			} else {
 				if (xfer_cnt < sc->underflow) {
-					sc->result = DID_SOFT_ERROR << 16;
+					if (scsi_status == SAM_STAT_BUSY)
+						sc->result = SAM_STAT_BUSY;
+					else
+						sc->result = DID_SOFT_ERROR << 16;
 				}
 				if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) {
 					/* What to do?
@@ -717,8 +730,10 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 
 		case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:	/* 0x0040 */
 		case MPI_IOCSTATUS_SUCCESS:			/* 0x0000 */
-			scsi_status = pScsiReply->SCSIStatus;
-			sc->result = (DID_OK << 16) | scsi_status;
+			if (scsi_status == MPI_SCSI_STATUS_BUSY)
+				sc->result = (DID_BUS_BUSY << 16) | scsi_status;
+			else
+				sc->result = (DID_OK << 16) | scsi_status;
 			if (scsi_state == 0) {
 				;
 			} else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
@@ -890,12 +905,13 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun)
 	SCSIIORequest_t	*mf = NULL;
 	int		 ii;
 	int		 max = hd->ioc->req_depth;
+	struct scsi_cmnd *sc;
 
 	dsprintk((KERN_INFO MYNAM ": search_running target %d lun %d max %d\n",
 			target, lun, max));
 
 	for (ii=0; ii < max; ii++) {
-		if (hd->ScsiLookup[ii] != NULL) {
+		if ((sc = hd->ScsiLookup[ii]) != NULL) {
 
 			mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(hd->ioc, ii);
 
@@ -910,9 +926,22 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun)
 			hd->ScsiLookup[ii] = NULL;
 			mptscsih_freeChainBuffers(hd->ioc, ii);
 			mpt_free_msg_frame(hd->ioc, (MPT_FRAME_HDR *)mf);
+			if (sc->use_sg) {
+				pci_unmap_sg(hd->ioc->pcidev,
+				(struct scatterlist *) sc->request_buffer,
+					sc->use_sg,
+					sc->sc_data_direction);
+			} else if (sc->request_bufflen) {
+				pci_unmap_single(hd->ioc->pcidev,
+					sc->SCp.dma_handle,
+					sc->request_bufflen,
+					sc->sc_data_direction);
+			}
+			sc->host_scribble = NULL;
+			sc->result = DID_NO_CONNECT << 16;
+			sc->scsi_done(sc);
 		}
 	}
-
 	return;
 }
 
@@ -967,8 +996,10 @@ mptscsih_remove(struct pci_dev *pdev)
 	unsigned long	 	flags;
 	int sz1;
 
-	if(!host)
+	if(!host) {
+		mpt_detach(pdev);
 		return;
+	}
 
 	scsi_remove_host(host);
 
@@ -1422,6 +1453,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	return 0;
 
  fail:
+	hd->ScsiLookup[my_idx] = NULL;
 	mptscsih_freeChainBuffers(hd->ioc, my_idx);
 	mpt_free_msg_frame(hd->ioc, mf);
 	return SCSI_MLQUEUE_HOST_BUSY;
@@ -1709,24 +1741,23 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 	MPT_FRAME_HDR	*mf;
 	u32		 ctx2abort;
 	int		 scpnt_idx;
+	int		 retval;
 
 	/* If we can't locate our host adapter structure, return FAILED status.
 	 */
 	if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL) {
 		SCpnt->result = DID_RESET << 16;
 		SCpnt->scsi_done(SCpnt);
-		dfailprintk((KERN_WARNING MYNAM ": mptscsih_abort: "
+		dfailprintk((KERN_INFO MYNAM ": mptscsih_abort: "
 			   "Can't locate host! (sc=%p)\n",
 			   SCpnt));
 		return FAILED;
 	}
 
 	ioc = hd->ioc;
-	if (hd->resetPending)
+	if (hd->resetPending) {
 		return FAILED;
-
-	printk(KERN_WARNING MYNAM ": %s: >> Attempting task abort! (sc=%p)\n",
-	       hd->ioc->name, SCpnt);
+	}
 
 	if (hd->timeouts < -1)
 		hd->timeouts++;
@@ -1734,16 +1765,20 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 	/* Find this command
 	 */
 	if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(SCpnt)) < 0) {
-		/* Cmd not found in ScsiLookup. 
+		/* Cmd not found in ScsiLookup.
 		 * Do OS callback.
 		 */
 		SCpnt->result = DID_RESET << 16;
-		dtmprintk((KERN_WARNING MYNAM ": %s: mptscsih_abort: "
+		dtmprintk((KERN_INFO MYNAM ": %s: mptscsih_abort: "
 			   "Command not in the active list! (sc=%p)\n",
 			   hd->ioc->name, SCpnt));
 		return SUCCESS;
 	}
 
+	printk(KERN_WARNING MYNAM ": %s: attempting task abort! (sc=%p)\n",
+	       hd->ioc->name, SCpnt);
+	scsi_print_command(SCpnt);
+
 	/* Most important!  Set TaskMsgContext to SCpnt's MsgContext!
 	 * (the IO to be ABORT'd)
 	 *
@@ -1756,38 +1791,22 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 
 	hd->abortSCpnt = SCpnt;
 
-	if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
+	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
 		SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun,
-		ctx2abort, 2 /* 2 second timeout */)
-		< 0) {
+		ctx2abort, 2 /* 2 second timeout */);
 
-		/* The TM request failed and the subsequent FW-reload failed!
-		 * Fatal error case.
-		 */
-		printk(MYIOC_s_WARN_FMT "Error issuing abort task! (sc=%p)\n",
-		       hd->ioc->name, SCpnt);
+	printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n",
+		hd->ioc->name,
+		((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
 
-		/* We must clear our pending flag before clearing our state.
-		 */
+	if (retval == 0)
+		return SUCCESS;
+
+	if(retval != FAILED ) {
 		hd->tmPending = 0;
 		hd->tmState = TM_STATE_NONE;
-
-		/* Unmap the DMA buffers, if any. */
-		if (SCpnt->use_sg) {
-			pci_unmap_sg(ioc->pcidev, (struct scatterlist *) SCpnt->request_buffer,
-				    SCpnt->use_sg, SCpnt->sc_data_direction);
-		} else if (SCpnt->request_bufflen) {
-			pci_unmap_single(ioc->pcidev, SCpnt->SCp.dma_handle,
-				SCpnt->request_bufflen, SCpnt->sc_data_direction);
-		}
-		hd->ScsiLookup[scpnt_idx] = NULL;
-		SCpnt->result = DID_RESET << 16;
-		SCpnt->scsi_done(SCpnt);		/* Issue the command callback */
-		mptscsih_freeChainBuffers(ioc, scpnt_idx);
-		mpt_free_msg_frame(ioc, mf);
-		return FAILED;
 	}
-	return SUCCESS;
+	return FAILED;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1803,11 +1822,12 @@ int
 mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
 {
 	MPT_SCSI_HOST	*hd;
+	int		 retval;
 
 	/* If we can't locate our host adapter structure, return FAILED status.
 	 */
 	if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
-		dtmprintk((KERN_WARNING MYNAM ": mptscsih_dev_reset: "
+		dtmprintk((KERN_INFO MYNAM ": mptscsih_dev_reset: "
 			   "Can't locate host! (sc=%p)\n",
 			   SCpnt));
 		return FAILED;
@@ -1816,24 +1836,26 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
 	if (hd->resetPending)
 		return FAILED;
 
-	printk(KERN_WARNING MYNAM ": %s: >> Attempting target reset! (sc=%p)\n",
+	printk(KERN_WARNING MYNAM ": %s: attempting target reset! (sc=%p)\n",
 	       hd->ioc->name, SCpnt);
+	scsi_print_command(SCpnt);
 
-	if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
+	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
 		SCpnt->device->channel, SCpnt->device->id,
-		0, 0, 5 /* 5 second timeout */)
-		< 0){
-		/* The TM request failed and the subsequent FW-reload failed!
-		 * Fatal error case.
-		 */
-		printk(MYIOC_s_WARN_FMT "Error processing TaskMgmt request (sc=%p)\n",
-		 		hd->ioc->name, SCpnt);
+		0, 0, 5 /* 5 second timeout */);
+
+	printk (KERN_WARNING MYNAM ": %s: target reset: %s (sc=%p)\n",
+		hd->ioc->name,
+		((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
+
+	if (retval == 0)
+		return SUCCESS;
+
+	if(retval != FAILED ) {
 		hd->tmPending = 0;
 		hd->tmState = TM_STATE_NONE;
-		return FAILED;
 	}
-
-	return SUCCESS;
+	return FAILED;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1849,41 +1871,39 @@ int
 mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
 {
 	MPT_SCSI_HOST	*hd;
-	spinlock_t	*host_lock = SCpnt->device->host->host_lock;
+	int		 retval;
 
 	/* If we can't locate our host adapter structure, return FAILED status.
 	 */
 	if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){
-		dtmprintk((KERN_WARNING MYNAM ": mptscsih_bus_reset: "
+		dtmprintk((KERN_INFO MYNAM ": mptscsih_bus_reset: "
 			   "Can't locate host! (sc=%p)\n",
 			   SCpnt ) );
 		return FAILED;
 	}
 
-	printk(KERN_WARNING MYNAM ": %s: >> Attempting bus reset! (sc=%p)\n",
+	printk(KERN_WARNING MYNAM ": %s: attempting bus reset! (sc=%p)\n",
 	       hd->ioc->name, SCpnt);
+	scsi_print_command(SCpnt);
 
 	if (hd->timeouts < -1)
 		hd->timeouts++;
 
-	/* We are now ready to execute the task management request. */
-	if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
-		SCpnt->device->channel, 0, 0, 0, 5 /* 5 second timeout */)
-	    < 0){
+	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
+		SCpnt->device->channel, 0, 0, 0, 5 /* 5 second timeout */);
 
-		/* The TM request failed and the subsequent FW-reload failed!
-		 * Fatal error case.
-		 */
-		printk(MYIOC_s_WARN_FMT
-		       "Error processing TaskMgmt request (sc=%p)\n",
-		       hd->ioc->name, SCpnt);
+	printk (KERN_WARNING MYNAM ": %s: bus reset: %s (sc=%p)\n",
+		hd->ioc->name,
+		((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
+
+	if (retval == 0)
+		return SUCCESS;
+
+	if(retval != FAILED ) {
 		hd->tmPending = 0;
 		hd->tmState = TM_STATE_NONE;
-		spin_lock_irq(host_lock);
-		return FAILED;
 	}
-
-	return SUCCESS;
+	return FAILED;
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -2165,7 +2185,7 @@ mptscsih_slave_alloc(struct scsi_device *device)
 	vdev->raidVolume = 0;
 	hd->Targets[device->id] = vdev;
 	if (hd->ioc->bus_type == SCSI) {
-		if (hd->ioc->spi_data.isRaid & (1 << device->id)) {
+		if (hd->ioc->raid_data.isRaid & (1 << device->id)) {
 			vdev->raidVolume = 1;
 			ddvtprintk((KERN_INFO
 			    "RAID Volume @ id %d\n", device->id));
@@ -2180,22 +2200,6 @@ mptscsih_slave_alloc(struct scsi_device *device)
 	return 0;
 }
 
-static int 
-mptscsih_is_raid_volume(MPT_SCSI_HOST *hd, uint id)
-{
-	int i;
-
-	if (!hd->ioc->spi_data.isRaid || !hd->ioc->spi_data.pIocPg3)
-		return 0;
-
-	for (i = 0; i < hd->ioc->spi_data.pIocPg3->NumPhysDisks; i++) {
-		if (id == hd->ioc->spi_data.pIocPg3->PhysDisk[i].PhysDiskID)
-			return 1;
-	}
-
-	return 0;
-}
-
 /*
  *	OS entry point to allow for host driver to free allocated memory
  *	Called if no device present or device being unloaded
@@ -2223,7 +2227,7 @@ mptscsih_slave_destroy(struct scsi_device *device)
 	hd->Targets[target] = NULL;
 
 	if (hd->ioc->bus_type == SCSI) {
-		if (mptscsih_is_raid_volume(hd, target)) {
+		if (mptscsih_is_phys_disk(hd->ioc, target)) {
 			hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3;
 		} else {
 			hd->ioc->spi_data.dvStatus[target] =
@@ -2436,6 +2440,7 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 {
 	MPT_SCSI_HOST	*hd;
 	unsigned long	 flags;
+	int 		ii;
 
 	dtmprintk((KERN_WARNING MYNAM
 			": IOC %s_reset routed to SCSI host driver!\n",
@@ -2493,11 +2498,8 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 
 		/* ScsiLookup initialization
 		 */
-		{
-			int ii;
-			for (ii=0; ii < hd->ioc->req_depth; ii++)
-				hd->ScsiLookup[ii] = NULL;
-		}
+		for (ii=0; ii < hd->ioc->req_depth; ii++)
+			hd->ScsiLookup[ii] = NULL;
 
 		/* 2. Chain Buffer initialization
 		 */
@@ -2546,6 +2548,16 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/* work queue thread to clear the persitency table */
+static void
+mptscsih_sas_persist_clear_table(void * arg)
+{
+	MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
+
+	mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 int
 mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 {
@@ -2555,18 +2567,18 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 	devtprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
 			ioc->name, event));
 
+	if (ioc->sh == NULL ||
+		((hd = (MPT_SCSI_HOST *)ioc->sh->hostdata) == NULL))
+		return 1;
+
 	switch (event) {
 	case MPI_EVENT_UNIT_ATTENTION:			/* 03 */
 		/* FIXME! */
 		break;
 	case MPI_EVENT_IOC_BUS_RESET:			/* 04 */
 	case MPI_EVENT_EXT_BUS_RESET:			/* 05 */
-		hd = NULL;
-		if (ioc->sh) {
-			hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
-			if (hd && (ioc->bus_type == SCSI) && (hd->soft_resets < -1))
-				hd->soft_resets++;
-		}
+		if (hd && (ioc->bus_type == SCSI) && (hd->soft_resets < -1))
+			hd->soft_resets++;
 		break;
 	case MPI_EVENT_LOGOUT:				/* 09 */
 		/* FIXME! */
@@ -2585,69 +2597,24 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 		break;
 
 	case MPI_EVENT_INTEGRATED_RAID:			/* 0B */
+	{
+		pMpiEventDataRaid_t pRaidEventData =
+		    (pMpiEventDataRaid_t) pEvReply->Data;
 #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION
-		/* negoNvram set to 0 if DV enabled and to USE_NVRAM if
-		 * if DV disabled. Need to check for target mode.
-		 */
-		hd = NULL;
-		if (ioc->sh)
-			hd = (MPT_SCSI_HOST *) ioc->sh->hostdata;
-
-		if (hd && (ioc->bus_type == SCSI) && (hd->negoNvram == 0)) {
-			ScsiCfgData	*pSpi;
-			Ioc3PhysDisk_t	*pPDisk;
-			int		 numPDisk;
-			u8		 reason;
-			u8		 physDiskNum;
-
-			reason = (le32_to_cpu(pEvReply->Data[0]) & 0x00FF0000) >> 16;
-			if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
-				/* New or replaced disk.
-				 * Set DV flag and schedule DV.
-				 */
-				pSpi = &ioc->spi_data;
-				physDiskNum = (le32_to_cpu(pEvReply->Data[0]) & 0xFF000000) >> 24;
-				ddvtprintk(("DV requested for phys disk id %d\n", physDiskNum));
-				if (pSpi->pIocPg3) {
-					pPDisk =  pSpi->pIocPg3->PhysDisk;
-					numPDisk =pSpi->pIocPg3->NumPhysDisks;
-
-					while (numPDisk) {
-						if (physDiskNum == pPDisk->PhysDiskNum) {
-							pSpi->dvStatus[pPDisk->PhysDiskID] = (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE);
-							pSpi->forceDv = MPT_SCSICFG_NEED_DV;
-							ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID));
-							break;
-						}
-						pPDisk++;
-						numPDisk--;
-					}
-
-					if (numPDisk == 0) {
-						/* The physical disk that needs DV was not found
-						 * in the stored IOC Page 3. The driver must reload
-						 * this page. DV routine will set the NEED_DV flag for
-						 * all phys disks that have DV_NOT_DONE set.
-						 */
-						pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
-						ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n", physDiskNum));
-					}
-				}
-			}
-		}
+		/* Domain Validation Needed */
+		if (ioc->bus_type == SCSI &&
+		    pRaidEventData->ReasonCode ==
+		    MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED)
+			mptscsih_set_dvflags_raid(hd, pRaidEventData->PhysDiskNum);
 #endif
+		break;
+	}
 
-#if defined(MPT_DEBUG_DV) || defined(MPT_DEBUG_DV_TINY)
-		printk("Raid Event RF: ");
-		{
-			u32 *m = (u32 *)pEvReply;
-			int ii;
-			int n = (int)pEvReply->MsgLength;
-			for (ii=6; ii < n; ii++)
-				printk(" %08x", le32_to_cpu(m[ii]));
-			printk("\n");
-		}
-#endif
+	/* Persistent table is full. */
+	case MPI_EVENT_PERSISTENT_TABLE_FULL:
+		INIT_WORK(&mptscsih_persistTask,
+		    mptscsih_sas_persist_clear_table,(void *)ioc);
+		schedule_work(&mptscsih_persistTask);
 		break;
 
 	case MPI_EVENT_NONE:				/* 00 */
@@ -2684,7 +2651,7 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *
 {
 	int		indexed_lun, lun_index;
 	VirtDevice	*vdev;
-	ScsiCfgData	*pSpi;
+	SpiCfgData	*pSpi;
 	char		data_56;
 
 	dinitprintk((MYIOC_s_INFO_FMT "initTarget bus=%d id=%d lun=%d hd=%p\n",
@@ -2791,7 +2758,7 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char *
 static void
 mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56)
 {
-	ScsiCfgData *pspi_data = &hd->ioc->spi_data;
+	SpiCfgData *pspi_data = &hd->ioc->spi_data;
 	int  id = (int) target->target_id;
 	int  nvram;
 	VirtDevice	*vdev;
@@ -2970,11 +2937,13 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56)
 static void
 mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq)
 {
+	MPT_ADAPTER	*ioc = hd->ioc;
 	u8 cmd;
-	ScsiCfgData *pSpi;
+	SpiCfgData	*pSpi;
 
-	ddvtprintk((" set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n", 
-		pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0]));
+	ddvtprintk((MYIOC_s_NOTE_FMT
+		" set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n",
+		hd->ioc->name, pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0]));
 
 	if ((pReq->LUN[1] != 0) || (hd->negoNvram != 0))
 		return;
@@ -2982,12 +2951,12 @@ mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq)
 	cmd = pReq->CDB[0];
 
 	if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) {
-		pSpi = &hd->ioc->spi_data;
-		if ((pSpi->isRaid & (1 << pReq->TargetID)) && pSpi->pIocPg3) {
+		pSpi = &ioc->spi_data;
+		if ((ioc->raid_data.isRaid & (1 << pReq->TargetID)) && ioc->raid_data.pIocPg3) {
 			/* Set NEED_DV for all hidden disks
 			 */
-			Ioc3PhysDisk_t *pPDisk =  pSpi->pIocPg3->PhysDisk;
-			int		numPDisk = pSpi->pIocPg3->NumPhysDisks;
+			Ioc3PhysDisk_t *pPDisk =  ioc->raid_data.pIocPg3->PhysDisk;
+			int		numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
 
 			while (numPDisk) {
 				pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV;
@@ -3001,6 +2970,50 @@ mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq)
 	}
 }
 
+/* mptscsih_raid_set_dv_flags()
+ *
+ * New or replaced disk. Set DV flag and schedule DV.
+ */
+static void
+mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id)
+{
+	MPT_ADAPTER	*ioc = hd->ioc;
+	SpiCfgData	*pSpi = &ioc->spi_data;
+	Ioc3PhysDisk_t	*pPDisk;
+	int		 numPDisk;
+
+	if (hd->negoNvram != 0)
+		return;
+
+	ddvtprintk(("DV requested for phys disk id %d\n", id));
+	if (ioc->raid_data.pIocPg3) {
+		pPDisk =  ioc->raid_data.pIocPg3->PhysDisk;
+		numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
+		while (numPDisk) {
+			if (id == pPDisk->PhysDiskNum) {
+				pSpi->dvStatus[pPDisk->PhysDiskID] =
+				    (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE);
+				pSpi->forceDv = MPT_SCSICFG_NEED_DV;
+				ddvtprintk(("NEED_DV set for phys disk id %d\n",
+				    pPDisk->PhysDiskID));
+				break;
+			}
+			pPDisk++;
+			numPDisk--;
+		}
+
+		if (numPDisk == 0) {
+			/* The physical disk that needs DV was not found
+			 * in the stored IOC Page 3. The driver must reload
+			 * this page. DV routine will set the NEED_DV flag for
+			 * all phys disks that have DV_NOT_DONE set.
+			 */
+			pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3;
+			ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n",id));
+		}
+	}
+}
+
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
  * If no Target, bus reset on 1st I/O. Set the flag to
@@ -3088,7 +3101,7 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags)
 	MPT_ADAPTER		*ioc = hd->ioc;
 	Config_t		*pReq;
 	SCSIDevicePage1_t	*pData;
-	VirtDevice		*pTarget;
+	VirtDevice		*pTarget=NULL;
 	MPT_FRAME_HDR		*mf;
 	dma_addr_t		 dataDma;
 	u16			 req_idx;
@@ -3187,7 +3200,7 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags)
 #endif
 
 		if (flags & MPT_SCSICFG_BLK_NEGO)
-			negoFlags = MPT_TARGET_NO_NEGO_WIDE | MPT_TARGET_NO_NEGO_SYNC;
+			negoFlags |= MPT_TARGET_NO_NEGO_WIDE | MPT_TARGET_NO_NEGO_SYNC;
 
 		mptscsih_setDevicePage1Flags(width, factor, offset,
 					&requested, &configuration, negoFlags);
@@ -4008,7 +4021,7 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum)
 
 		/* If target Ptr NULL or if this target is NOT a disk, skip.
 		 */
-		if ((pTarget) && (pTarget->tflags & MPT_TARGET_FLAGS_Q_YES)){
+		if ((pTarget) && (pTarget->inq_data[0] == TYPE_DISK)){
 			for (lun=0; lun <= MPT_LAST_LUN; lun++) {
 				/* If LUN present, issue the command
 				 */
@@ -4103,9 +4116,9 @@ mptscsih_domainValidation(void *arg)
 
 			if ((ioc->spi_data.forceDv & MPT_SCSICFG_RELOAD_IOC_PG3) != 0) {
 				mpt_read_ioc_pg_3(ioc);
-				if (ioc->spi_data.pIocPg3) {
-					Ioc3PhysDisk_t *pPDisk = ioc->spi_data.pIocPg3->PhysDisk;
-					int		numPDisk = ioc->spi_data.pIocPg3->NumPhysDisks;
+				if (ioc->raid_data.pIocPg3) {
+					Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk;
+					int		numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
 
 					while (numPDisk) {
 						if (ioc->spi_data.dvStatus[pPDisk->PhysDiskID] & MPT_SCSICFG_DV_NOT_DONE)
@@ -4144,7 +4157,7 @@ mptscsih_domainValidation(void *arg)
 					isPhysDisk = mptscsih_is_phys_disk(ioc, id);
 					if (isPhysDisk) {
 						for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
-							if (hd->ioc->spi_data.isRaid & (1 << ii)) {
+							if (hd->ioc->raid_data.isRaid & (1 << ii)) {
 								hd->ioc->spi_data.dvStatus[ii] |= MPT_SCSICFG_DV_PENDING;
 							}
 						}
@@ -4163,7 +4176,7 @@ mptscsih_domainValidation(void *arg)
 
 					if (isPhysDisk) {
 						for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
-							if (hd->ioc->spi_data.isRaid & (1 << ii)) {
+							if (hd->ioc->raid_data.isRaid & (1 << ii)) {
 								hd->ioc->spi_data.dvStatus[ii] &= ~MPT_SCSICFG_DV_PENDING;
 							}
 						}
@@ -4185,21 +4198,21 @@ mptscsih_domainValidation(void *arg)
 
 /* Search IOC page 3 to determine if this is hidden physical disk
  */
-static int 
+/* Search IOC page 3 to determine if this is hidden physical disk
+ */
+static int
 mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id)
 {
-	if (ioc->spi_data.pIocPg3) {
-		Ioc3PhysDisk_t *pPDisk =  ioc->spi_data.pIocPg3->PhysDisk;
-		int		numPDisk = ioc->spi_data.pIocPg3->NumPhysDisks;
+	int i;
 
-		while (numPDisk) {
-			if (pPDisk->PhysDiskID == id) {
-				return 1;
-			}
-			pPDisk++;
-			numPDisk--;
-		}
+	if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3)
+		return 0;
+
+	for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+		if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID)
+			return 1;
 	}
+
 	return 0;
 }
 
@@ -4405,7 +4418,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
 	/* Skip this ID? Set cfg.cfghdr.hdr to force config page write
 	 */
 	{
-		ScsiCfgData *pspi_data = &hd->ioc->spi_data;
+		SpiCfgData *pspi_data = &hd->ioc->spi_data;
 		if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) {
 			/* Set the factor from nvram */
 			nfactor = (pspi_data->nvram[id] & MPT_NVRAM_SYNC_MASK) >> 8;
@@ -4435,11 +4448,11 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
 	}
 
 	/* Finish iocmd inititialization - hidden or visible disk? */
-	if (ioc->spi_data.pIocPg3) {
+	if (ioc->raid_data.pIocPg3) {
 		/* Search IOC page 3 for matching id
 		 */
-		Ioc3PhysDisk_t *pPDisk =  ioc->spi_data.pIocPg3->PhysDisk;
-		int		numPDisk = ioc->spi_data.pIocPg3->NumPhysDisks;
+		Ioc3PhysDisk_t *pPDisk =  ioc->raid_data.pIocPg3->PhysDisk;
+		int		numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks;
 
 		while (numPDisk) {
 			if (pPDisk->PhysDiskID == id) {
@@ -4463,7 +4476,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
 	/* RAID Volume ID's may double for a physical device. If RAID but
 	 * not a physical ID as well, skip DV.
 	 */
-	if ((hd->ioc->spi_data.isRaid & (1 << id)) && !(iocmd.flags & MPT_ICFLAG_PHYS_DISK))
+	if ((hd->ioc->raid_data.isRaid & (1 << id)) && !(iocmd.flags & MPT_ICFLAG_PHYS_DISK))
 		goto target_done;
 
 
@@ -4812,6 +4825,8 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
 					notDone = 0;
 					if (iocmd.flags & MPT_ICFLAG_ECHO) {
 						bufsize =  ((pbuf1[2] & 0x1F) <<8) | pbuf1[3];
+						if (pbuf1[0] & 0x01)
+							iocmd.flags |= MPT_ICFLAG_EBOS;
 					} else {
 						bufsize =  pbuf1[1]<<16 | pbuf1[2]<<8 | pbuf1[3];
 					}
@@ -4908,6 +4923,9 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
 		}
 		iocmd.flags &= ~MPT_ICFLAG_DID_RESET;
 
+		if (iocmd.flags & MPT_ICFLAG_EBOS)
+			goto skip_Reserve;
+
 		repeat = 5;
 		while (repeat && (!(iocmd.flags & MPT_ICFLAG_RESERVED))) {
 			iocmd.cmd = RESERVE;
@@ -4951,6 +4969,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id)
 			}
 		}
 
+skip_Reserve:
 		mptscsih_fillbuf(pbuf1, sz, patt, 1);
 		iocmd.cmd = WRITE_BUFFER;
 		iocmd.data_dma = buf1_dma;
@@ -5195,11 +5214,12 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
 		 * If not an LVD bus, the adapter minSyncFactor has been
 		 * already throttled back.
 		 */
+		negoFlags = hd->ioc->spi_data.noQas;
 		if ((hd->Targets)&&((pTarget = hd->Targets[(int)id]) != NULL) && !pTarget->raidVolume) {
 			width = pTarget->maxWidth;
 			offset = pTarget->maxOffset;
 			factor = pTarget->minSyncFactor;
-			negoFlags = pTarget->negoFlags;
+			negoFlags |= pTarget->negoFlags;
 		} else {
 			if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) {
 				data = hd->ioc->spi_data.nvram[id];
@@ -5220,7 +5240,6 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
 			}
 
 			/* Set the negotiation flags */
-			negoFlags = hd->ioc->spi_data.noQas;
 			if (!width)
 				negoFlags |= MPT_TARGET_NO_NEGO_WIDE;