mtd: nand: force drivers to explicitly send READ/PROG commands

The core currently send the READ0 and SEQIN+PAGEPROG commands in
nand_do_read/write_ops(). This is inconsistent with
->read/write_oob[_raw]() hooks behavior which are expected to send
these commands.

There's already a flag (NAND_ECC_CUSTOM_PAGE_ACCESS) to inform the core
that a specific controller wants to send the READ/SEQIN+PAGEPROG
commands on its own, but it's an opt-in flag, and existing drivers are
unlikely to be updated to pass it.

Moreover, some controllers cannot dissociate the READ/PAGEPROG commands
from the associated data transfer and ECC engine activation, and
developers have to hack things in their ->cmdfunc() implementation to
handle such complex cases, or have to accept the perf penalty of sending
twice the same command.
To address this problem we are planning on adding a new interface which
is passed all information about a NAND operation (including the amount
of data to transfer) and replacing all calls to ->cmdfunc() to calls to
this new ->exec_op() hook. But, in order to do that, we need to have all
->cmdfunc() calls placed near their associated ->read/write_buf/byte()
calls.

Modify the core and relevant drivers to make NAND_ECC_CUSTOM_PAGE_ACCESS
the default case, and remove this flag.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[miquel.raynal@free-electrons.com: tested, fixed and rebased on nand/next]
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>

1 files changed, 5 insertions, 2 deletions

diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c
index e81fdd2d47b1..b2f00b398490 100644
--- a/drivers/mtd/nand/atmel/nand-controller.c
+++ b/drivers/mtd/nand/atmel/nand-controller.c
@@ -841,6 +841,8 @@ static int atmel_nand_pmecc_write_pg(struct nand_chip *chip, const u8 *buf,
 	struct atmel_nand *nand = to_atmel_nand(chip);
 	int ret;
 
+	nand_prog_page_begin_op(chip, page, 0, NULL, 0);
+
 	ret = atmel_nand_pmecc_enable(chip, NAND_ECC_WRITE, raw);
 	if (ret)
 		return ret;
@@ -857,7 +859,7 @@ static int atmel_nand_pmecc_write_pg(struct nand_chip *chip, const u8 *buf,
 
 	atmel_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
 
-	return 0;
+	return nand_prog_page_end_op(chip);
 }
 
 static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
@@ -881,6 +883,8 @@ static int atmel_nand_pmecc_read_pg(struct nand_chip *chip, u8 *buf,
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	int ret;
 
+	nand_read_page_op(chip, page, 0, NULL, 0);
+
 	ret = atmel_nand_pmecc_enable(chip, NAND_ECC_READ, raw);
 	if (ret)
 		return ret;
@@ -1178,7 +1182,6 @@ static int atmel_hsmc_nand_ecc_init(struct atmel_nand *nand)
 	chip->ecc.write_page = atmel_hsmc_nand_pmecc_write_page;
 	chip->ecc.read_page_raw = atmel_hsmc_nand_pmecc_read_page_raw;
 	chip->ecc.write_page_raw = atmel_hsmc_nand_pmecc_write_page_raw;
-	chip->ecc.options |= NAND_ECC_CUSTOM_PAGE_ACCESS;
 
 	return 0;
 }