diff options
| author | Roger Quadros <rogerq@ti.com> | 2015-02-23 17:26:39 +0200 |
|---|---|---|
| committer | Brian Norris <computersforpeace@gmail.com> | 2015-03-30 17:39:15 -0700 |
| commit | 60c70d66cdd39eb560bba5a95c429bf2ad5294d0 (patch) | |
| tree | 52eb33f58905f89256ebd8836ff25af072b65f16 /drivers/mtd | |
| parent | 8cc7f33aadc8fb37b5a3f4c46f5fa83748a92a01 (diff) | |
mtd: nand: Prevent possible kernel lockup in nand_command()
If a NAND device is not really present or pin muxes are not correctly
configured we can lock up the kernel waiting infinitely for NAND_STATUS
to be ready.
This can be easily reproduced on TI's DRA7-evm board by booting it
without NAND support in u-boot and disabling NAND pin muxes in the kernel.
Add timeout when waiting for NAND_CMD_RESET completion. As per ONFi v4.0
tRST can be upto 250ms for EZ-NAND and 5ms for raw NAND.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/nand/nand_base.c | 27 |
1 files changed, 23 insertions, 4 deletions
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index ff5652211607..c2e1232cd45c 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -566,6 +566,25 @@ void nand_wait_ready(struct mtd_info *mtd) EXPORT_SYMBOL_GPL(nand_wait_ready); /** + * nand_wait_status_ready - [GENERIC] Wait for the ready status after commands. + * @mtd: MTD device structure + * @timeo: Timeout in ms + * + * Wait for status ready (i.e. command done) or timeout. + */ +static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo) +{ + register struct nand_chip *chip = mtd->priv; + + timeo = jiffies + msecs_to_jiffies(timeo); + do { + if ((chip->read_byte(mtd) & NAND_STATUS_READY)) + break; + touch_softlockup_watchdog(); + } while (time_before(jiffies, timeo)); +}; + +/** * nand_command - [DEFAULT] Send command to NAND device * @mtd: MTD device structure * @command: the command to be sent @@ -643,8 +662,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, NAND_CTRL_CLE | NAND_CTRL_CHANGE); chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) - ; + /* EZ-NAND can take upto 250ms as per ONFi v4.0 */ + nand_wait_status_ready(mtd, 250); return; /* This applies to read commands */ @@ -740,8 +759,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) - ; + /* EZ-NAND can take upto 250ms as per ONFi v4.0 */ + nand_wait_status_ready(mtd, 250); return; case NAND_CMD_RNDOUT: |