summaryrefslogtreecommitdiff
path: root/drivers/net/atlx
diff options
context:
space:
mode:
authorStephen Hemminger <shemminger@vyatta.com>2008-11-19 22:14:17 -0800
committerDavid S. Miller <davem@davemloft.net>2008-11-19 22:42:48 -0800
commit825a84d1d3d612c2b8db77dd4719882690d01bae (patch)
tree88f90161c7101610b44dc4d40e0ab29455245203 /drivers/net/atlx
parent1e058ab58f03fedbd2aa202c3a81c777d623be3a (diff)
atlx: convert to net_device_ops
Convert this driver to network device ops. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/atlx')
-rw-r--r--drivers/net/atlx/atl1.c28
-rw-r--r--drivers/net/atlx/atl2.c33
2 files changed, 33 insertions, 28 deletions
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 611a86ebe164..7a0fb04e3480 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2880,6 +2880,21 @@ static void atl1_poll_controller(struct net_device *netdev)
}
#endif
+static const struct net_device_ops atl1_netdev_ops = {
+ .ndo_open = atl1_open,
+ .ndo_stop = atl1_close,
+ .ndo_set_multicast_list = atlx_set_multi,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = atl1_set_mac,
+ .ndo_change_mtu = atl1_change_mtu,
+ .ndo_do_ioctl = atlx_ioctl,
+ .ndo_tx_timeout = atlx_tx_timeout,
+ .ndo_vlan_rx_register = atlx_vlan_rx_register,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = atl1_poll_controller,
+#endif
+};
+
/*
* atl1_probe - Device Initialization Routine
* @pdev: PCI device information struct
@@ -2967,20 +2982,9 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
adapter->mii.phy_id_mask = 0x1f;
adapter->mii.reg_num_mask = 0x1f;
- netdev->open = &atl1_open;
- netdev->stop = &atl1_close;
+ netdev->netdev_ops = &atl1_netdev_ops;
netdev->hard_start_xmit = &atl1_xmit_frame;
-
- netdev->set_multicast_list = &atlx_set_multi;
- netdev->set_mac_address = &atl1_set_mac;
- netdev->change_mtu = &atl1_change_mtu;
- netdev->do_ioctl = &atlx_ioctl;
- netdev->tx_timeout = &atlx_tx_timeout;
netdev->watchdog_timeo = 5 * HZ;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- netdev->poll_controller = atl1_poll_controller;
-#endif
- netdev->vlan_rx_register = atlx_vlan_rx_register;
netdev->ethtool_ops = &atl1_ethtool_ops;
adapter->bd_number = cards_found;
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index 60c9e5375eed..688c21e81a8e 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -1311,6 +1311,22 @@ static void atl2_poll_controller(struct net_device *netdev)
}
#endif
+
+static const struct net_device_ops atl2_netdev_ops = {
+ .ndo_open = atl2_open,
+ .ndo_stop = atl2_close,
+ .ndo_set_multicast_list = atl2_set_multi,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = atl2_set_mac,
+ .ndo_change_mtu = atl2_change_mtu,
+ .ndo_do_ioctl = atl2_ioctl,
+ .ndo_tx_timeout = atl2_tx_timeout,
+ .ndo_vlan_rx_register = atl2_vlan_rx_register,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = atl2_poll_controller,
+#endif
+};
+
/*
* atl2_probe - Device Initialization Routine
* @pdev: PCI device information struct
@@ -1384,25 +1400,10 @@ static int __devinit atl2_probe(struct pci_dev *pdev,
atl2_setup_pcicmd(pdev);
- netdev->open = &atl2_open;
- netdev->stop = &atl2_close;
netdev->hard_start_xmit = &atl2_xmit_frame;
- netdev->set_multicast_list = &atl2_set_multi;
- netdev->set_mac_address = &atl2_set_mac;
- netdev->change_mtu = &atl2_change_mtu;
- netdev->do_ioctl = &atl2_ioctl;
+ netdev->netdev_ops = &atl2_netdev_ops;
atl2_set_ethtool_ops(netdev);
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
- netdev->poll_controller = atl2_poll_controller;
-#endif
-#ifdef HAVE_TX_TIMEOUT
- netdev->tx_timeout = &atl2_tx_timeout;
netdev->watchdog_timeo = 5 * HZ;
-#endif
-#ifdef NETIF_F_HW_VLAN_TX
- netdev->vlan_rx_register = atl2_vlan_rx_register;
-#endif
strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
netdev->mem_start = mmio_start;