cxgb4: Set mac addr from vpd, when we can't contact firmware

Grab the Adapter MAC Address out of the VPD and use it for the "debug"
network interface when either we can't contact the firmware

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 37 insertions, 10 deletions

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 6d5b0f4be75b..da65e76c44b5 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -1729,17 +1729,16 @@ int t4_seeprom_wp(struct adapter *adapter, bool enable)
 }
 
 /**
- *	get_vpd_params - read VPD parameters from VPD EEPROM
+ *	t4_get_raw_vpd_params - read VPD parameters from VPD EEPROM
  *	@adapter: adapter to read
  *	@p: where to store the parameters
  *
  *	Reads card parameters stored in VPD EEPROM.
  */
-int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
+int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p)
 {
-	u32 cclk_param, cclk_val;
-	int i, ret, addr;
-	int ec, sn, pn;
+	int i, ret = 0, addr;
+	int ec, sn, pn, na;
 	u8 *vpd, csum;
 	unsigned int vpdr_len, kw_offset, id_len;
 
@@ -1747,6 +1746,9 @@ int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 	if (!vpd)
 		return -ENOMEM;
 
+	/* Card information normally starts at VPD_BASE but early cards had
+	 * it at 0.
+	 */
 	ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(u32), vpd);
 	if (ret < 0)
 		goto out;
@@ -1812,6 +1814,7 @@ int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 	FIND_VPD_KW(ec, "EC");
 	FIND_VPD_KW(sn, "SN");
 	FIND_VPD_KW(pn, "PN");
+	FIND_VPD_KW(na, "NA");
 #undef FIND_VPD_KW
 
 	memcpy(p->id, vpd + PCI_VPD_LRDT_TAG_SIZE, id_len);
@@ -1824,18 +1827,42 @@ int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 	i = pci_vpd_info_field_size(vpd + pn - PCI_VPD_INFO_FLD_HDR_SIZE);
 	memcpy(p->pn, vpd + pn, min(i, PN_LEN));
 	strim(p->pn);
+	memcpy(p->na, vpd + na, min(i, MACADDR_LEN));
+	strim((char *)p->na);
 
-	/*
-	 * Ask firmware for the Core Clock since it knows how to translate the
+out:
+	vfree(vpd);
+	return ret;
+}
+
+/**
+ *	t4_get_vpd_params - read VPD parameters & retrieve Core Clock
+ *	@adapter: adapter to read
+ *	@p: where to store the parameters
+ *
+ *	Reads card parameters stored in VPD EEPROM and retrieves the Core
+ *	Clock.  This can only be called after a connection to the firmware
+ *	is established.
+ */
+int t4_get_vpd_params(struct adapter *adapter, struct vpd_params *p)
+{
+	u32 cclk_param, cclk_val;
+	int ret;
+
+	/* Grab the raw VPD parameters.
+	 */
+	ret = t4_get_raw_vpd_params(adapter, p);
+	if (ret)
+		return ret;
+
+	/* Ask firmware for the Core Clock since it knows how to translate the
 	 * Reference Clock ('V2') VPD field into a Core Clock value ...
 	 */
 	cclk_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
 		      FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CCLK));
-	ret = t4_query_params(adapter, adapter->mbox, 0, 0,
+	ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
 			      1, &cclk_param, &cclk_val);
 
-out:
-	vfree(vpd);
 	if (ret)
 		return ret;
 	p->cclk = cclk_val;